Resguardo inicial

linux-7.2.3/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp

@@ -0,0 +1,70 @@
+========================================================
+Secondary CPU enable-method "al,alpine-smp" binding
+========================================================
+
+This document describes the "al,alpine-smp" method for
+enabling secondary CPUs. To apply to all CPUs, a single
+"al,alpine-smp" enable method should be defined in the
+"cpus" node.
+
+Enable method name:	"al,alpine-smp"
+Compatible machines:	"al,alpine"
+Compatible CPUs:	"arm,cortex-a15"
+Related properties:	(none)
+
+Note:
+This enable method requires valid nodes compatible with
+"al,alpine-cpu-resume" and "al,alpine-nb-service".
+
+
+* Alpine CPU resume registers
+
+The CPU resume register are used to define required resume address after
+reset.
+
+Properties:
+- compatible : Should contain "al,alpine-cpu-resume".
+- reg : Offset and length of the register set for the device
+
+
+Example:
+
+cpus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	enable-method = "al,alpine-smp";
+
+	cpu@0 {
+		compatible = "arm,cortex-a15";
+		device_type = "cpu";
+		reg = <0>;
+	};
+
+	cpu@1 {
+		compatible = "arm,cortex-a15";
+		device_type = "cpu";
+		reg = <1>;
+	};
+
+	cpu@2 {
+		compatible = "arm,cortex-a15";
+		device_type = "cpu";
+		reg = <2>;
+	};
+
+	cpu@3 {
+		compatible = "arm,cortex-a15";
+		device_type = "cpu";
+		reg = <3>;
+	};
+};
+
+cpu_resume {
+	compatible = "al,alpine-cpu-resume";
+	reg = <0xfbff5ed0 0x30>;
+};
+
+nb_service {
+        compatible = "al,alpine-sysfabric-service", "syscon";
+        reg = <0xfb070000 0x10000>;
+};

linux-7.2.3/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp

@@ -0,0 +1,41 @@
+========================================================
+Secondary CPU enable-method "marvell,berlin-smp" binding
+========================================================
+
+This document describes the "marvell,berlin-smp" method for enabling secondary
+CPUs. To apply to all CPUs, a single "marvell,berlin-smp" enable method should
+be defined in the "cpus" node.
+
+Enable method name:	"marvell,berlin-smp"
+Compatible machines:	"marvell,berlin2" and "marvell,berlin2q"
+Compatible CPUs:	"marvell,pj4b" and "arm,cortex-a9"
+Related properties:	(none)
+
+Note:
+This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
+"marvell,berlin-cpu-ctrl"[1].
+
+Example:
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,berlin-smp";
+
+		cpu@0 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+		};
+	};
+
+--
+[1] arm/marvell,berlin.txt

linux-7.2.3/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp

@@ -0,0 +1,42 @@
+=========================================================
+Secondary CPU enable-method "nuvoton,npcm750-smp" binding
+=========================================================
+
+To apply to all CPUs, a single "nuvoton,npcm750-smp" enable method should be
+defined in the "cpus" node.
+
+Enable method name:	"nuvoton,npcm750-smp"
+Compatible machines:	"nuvoton,npcm750"
+Compatible CPUs:	"arm,cortex-a9"
+Related properties:	(none)
+
+Note:
+This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
+"nuvoton,npcm750-gcr".
+
+Example:
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "nuvoton,npcm750-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk NPCM7XX_CLK_CPU>;
+			clock-names = "clk_cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk NPCM7XX_CLK_CPU>;
+			clock-names = "clk_cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+