Resguardo inicial

linux-7.2.3/Documentation/devicetree/bindings/counter/fsl,ftm-quaddec.yaml

@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/fsl,ftm-quaddec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FlexTimer Quadrature decoder counter
+
+description:
+  Exposes a simple counter for the quadrature decoder mode.
+
+maintainers:
+  - Frank Li <Frank.li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,ftm-quaddec
+
+  reg:
+    maxItems: 1
+
+  big-endian: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    counter@29d0000 {
+       compatible = "fsl,ftm-quaddec";
+       reg = <0x29d0000 0x10000>;
+       big-endian;
+    };

linux-7.2.3/Documentation/devicetree/bindings/counter/interrupt-counter.yaml

@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/interrupt-counter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt counter
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  A generic interrupt counter to measure interrupt frequency. It was developed
+  and used for agricultural devices to measure rotation speed of wheels or
+  other tools. Since the direction of rotation is not important, only one
+  signal line is needed.
+  Interrupts or gpios are required. If both are defined, the interrupt will
+  take precedence for counting interrupts.
+
+properties:
+  compatible:
+    const: interrupt-counter
+
+  interrupts:
+    maxItems: 1
+
+  gpios:
+    maxItems: 1
+
+required:
+  - compatible
+
+anyOf:
+  - required: [ interrupts-extended ]
+  - required: [ interrupts ]
+  - required: [ gpios ]
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    counter-0 {
+        compatible = "interrupt-counter";
+        interrupts-extended = <&gpio 0 IRQ_TYPE_EDGE_RISING>;
+    };
+
+    counter-1 {
+        compatible = "interrupt-counter";
+        gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+    };
+
+    counter-2 {
+        compatible = "interrupt-counter";
+        interrupts-extended = <&gpio 2 IRQ_TYPE_EDGE_RISING>;
+        gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Capture (eCAP) Module
+
+maintainers:
+  - Julien Panis <jpanis@baylibre.com>
+
+description: |
+  The eCAP module resources can be used to capture timestamps
+  on input signal events (falling/rising edges).
+
+properties:
+  compatible:
+    const: ti,am62-ecap-capture
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        capture@23100000 { /* eCAP in capture mode on am62x */
+            compatible = "ti,am62-ecap-capture";
+            reg = <0x00 0x23100000 0x00 0x100>;
+            interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+            power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 51 0>;
+            clock-names = "fck";
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/counter/ti-eqep.yaml

@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti-eqep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) Module
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,am3352-eqep
+      - ti,am62-eqep
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: The eQEP event interrupt
+    maxItems: 1
+
+  clocks:
+    description: The functional and interface clock that determines the clock
+      rate for the eQEP peripheral.
+    maxItems: 1
+
+  clock-names:
+    const: sysclkout
+
+  power-domains:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,am62-eqep
+    then:
+      properties:
+        clock-names: false
+
+      required:
+        - power-domains
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    eqep0: counter@180 {
+        compatible = "ti,am3352-eqep";
+        reg = <0x180 0x80>;
+        clocks = <&l4ls_gclk>;
+        interrupts = <79>;
+    };
+
+...