Resguardo inicial

linux-7.2.3/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/abt,y030xx067a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Asia Better Technology 3.0" (320x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: abt,y030xx067a
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "abt,y030xx067a";
+            reg = <0>;
+
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml

@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/advantech,idk-1110wr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advantech IDK-1110WR 10.1" WSVGA LVDS Display Panel
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: advantech,idk-1110wr
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: advantech,idk-1110wr
+      - const: panel-lvds
+
+  data-mapping:
+    const: jeida-24
+
+  width-mm:
+    const: 223
+
+  height-mm:
+    const: 125
+
+  panel-timing: true
+  port: true
+
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+additionalProperties: false
+
+examples:
+  - |+
+    panel {
+      compatible = "advantech,idk-1110wr", "panel-lvds";
+
+      width-mm = <223>;
+      height-mm = <125>;
+
+      data-mapping = "jeida-24";
+
+      panel-timing {
+        /* 1024x600 @60Hz */
+        clock-frequency = <51200000>;
+        hactive = <1024>;
+        vactive = <600>;
+        hsync-len = <240>;
+        hfront-porch = <40>;
+        hback-porch = <40>;
+        vsync-len = <10>;
+        vfront-porch = <15>;
+        vback-porch = <10>;
+      };
+
+      port {
+        panel_in: endpoint {
+          remote-endpoint = <&lvds_encoder>;
+        };
+      };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml

@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/advantech,idk-2121wr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advantech IDK-2121WR 21.5" Full-HD dual-LVDS panel
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The IDK-2121WR from Advantech is a Full-HD dual-LVDS panel.
+  A dual-LVDS interface is a dual-link connection with even pixels traveling
+  on one link, and with odd pixels traveling on the other link.
+
+  The panel expects odd pixels on the first port, and even pixels on the
+  second port, therefore the ports must be marked accordingly (with either
+  dual-lvds-odd-pixels or dual-lvds-even-pixels).
+
+allOf:
+  - $ref: /schemas/display/lvds-dual-ports.yaml#
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: advantech,idk-2121wr
+      - {} # panel-lvds, but not listed here to avoid false select
+
+  width-mm:
+    const: 476
+
+  height-mm:
+    const: 268
+
+  data-mapping:
+    const: vesa-24
+
+  panel-timing: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        required:
+          - dual-lvds-odd-pixels
+
+      port@1:
+        required:
+          - dual-lvds-even-pixels
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - width-mm
+  - height-mm
+  - data-mapping
+  - panel-timing
+
+additionalProperties: false
+
+examples:
+  - |+
+    panel-lvds {
+      compatible = "advantech,idk-2121wr", "panel-lvds";
+
+      width-mm = <476>;
+      height-mm = <268>;
+
+      data-mapping = "vesa-24";
+
+      panel-timing {
+        clock-frequency = <148500000>;
+        hactive = <1920>;
+        vactive = <1080>;
+        hsync-len = <44>;
+        hfront-porch = <88>;
+        hback-porch = <148>;
+        vfront-porch = <4>;
+        vback-porch = <36>;
+        vsync-len = <5>;
+      };
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          dual-lvds-odd-pixels;
+          panel_in0: endpoint {
+            remote-endpoint = <&lvds0_out>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+          dual-lvds-even-pixels;
+          panel_in1: endpoint {
+            remote-endpoint = <&lvds1_out>;
+          };
+        };
+      };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/anbernic,rg35xx-plus-panel.yaml

@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/anbernic,rg35xx-plus-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Anbernic RG35XX series (WL-355608-A8) 3.5" 640x480 24-bit IPS LCD panel
+
+maintainers:
+  - Ryan Walklin <ryan@testtoast.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: anbernic,rg35xx-plus-panel
+      - items:
+          - enum:
+              - anbernic,rg35xx-2024-panel
+              - anbernic,rg35xx-h-panel
+              - anbernic,rg35xx-sp-panel
+          - const: anbernic,rg35xx-plus-panel
+
+  reg:
+    maxItems: 1
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - reg
+  - port
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "anbernic,rg35xx-plus-panel";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&pio 8 14 GPIO_ACTIVE_LOW>; // PI14
+
+            backlight = <&backlight>;
+            power-supply = <&reg_lcd>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&tcon_lcd0_out_lcd>;
+                };
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/apple,summit.yaml

@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/apple,summit.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple "Summit" display panel
+
+maintainers:
+  - Sasha Finkelstein <k@chaosmail.tech>
+
+description:
+  An OLED panel used as a touchbar on certain Apple laptops.
+  Contains a backlight device, which controls brightness of the panel itself.
+  The backlight common properties are included for this reason
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/leds/backlight/common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,j293-summit
+          - apple,j493-summit
+      - const: apple,summit
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - max-brightness
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "apple,j293-summit", "apple,summit";
+            reg = <0>;
+            max-brightness = <255>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&dfr_bridge_out>;
+                };
+            };
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml

@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/arm,rtsm-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm RTSM Virtual Platforms Display
+
+maintainers:
+  - Linus Walleij <linusw@kernel.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: arm,rtsm-display
+
+  port: true
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/arm,versatile-tft-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile TFT Panels
+
+maintainers:
+  - Linus Walleij <linusw@kernel.org>
+
+description: |
+  These panels are connected to the daughterboards found on the
+  ARM Versatile reference designs.
+
+  This device node must appear as a child to a "syscon"-compatible
+  node.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: arm,versatile-tft-panel
+
+  port: true
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    sysreg@0 {
+        compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
+        reg = <0x00000 0x1000>;
+
+        panel {
+            compatible = "arm,versatile-tft-panel";
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&foo>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.yaml

@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/armadeus,st0700-adapt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Armadeus ST0700 Adapter
+
+description:
+  A Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT with an adapter board.
+
+maintainers:
+  - '"Sébastien Szymanski" <sebastien.szymanski@armadeus.com>'
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: armadeus,st0700-adapt
+
+  power-supply: true
+  backlight: true
+  port: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml

@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/asus,z00t-tm5p5-nt35596.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASUS Z00T TM5P5 NT35596 5.5" 1080×1920 LCD Panel
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |+
+  This panel seems to only be found in the Asus Z00T
+  smartphone and we have no straightforward way of
+  actually getting the correct model number,
+  as no schematics are released publicly.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: asus,z00t-tm5p5-n35596
+
+  reg:
+    maxItems: 1
+
+  reset-gpios: true
+  vdd-supply:
+    description: core voltage supply
+  vddio-supply:
+    description: vddio supply
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            panel@0 {
+                    reg = <0>;
+
+                    compatible = "asus,z00t-tm5p5-n35596";
+
+                    vdd-supply = <&pm8916_l8>;
+                    vddio-supply = <&pm8916_l6>;
+                    reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+            };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml

@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD panel
+
+description: |
+  Delta RGB 8-bit panel found in some Retrogame handhelds
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: auo,a030jtn01
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "auo,a030jtn01";
+            reg = <0>;
+
+            spi-max-frequency = <10000000>;
+
+            reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
+            power-supply = <&lcd_power>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.yaml

@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/bananapi,s070wv20-ct16.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: bananapi,s070wv20-ct16
+
+  power-supply: true
+  backlight: true
+  enable-gpios: true
+  port: true
+
+required:
+  - compatible
+  - power-supply
+
+additionalProperties: false
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml

@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,bf060y8m-aj0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE BF060Y8M-AJ0 5.99" 1080x2160 AMOLED Panel
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  This is a 5.99" 1080x2160 16.7M Color active matrix AMOLED
+  video mode panel module on MIPI-DSI 4-Lane interface, GGRB
+  pixel arrangement, 63 micrometers pitch, with an active
+  area of 68.04 x 136.08 millimeters.
+  Each pixel is divided into red and green dots, or blue and
+  green dots, and two pixels share red or blue dots which are
+  arranged in vertical stripe.
+  The DriverIC for this panel module is SW43404.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: boe,bf060y8m-aj0
+
+  reg:
+    maxItems: 1
+
+  elvdd-supply:
+    description: EL Driving positive (VDD) supply (4.40-4.80V)
+  elvss-supply:
+    description: EL Driving negative (VSS) supply (-5.00V to -1.40V)
+  vcc-supply:
+    description: Core (TSP) voltage supply (2.70-3.60V)
+  vci-supply:
+    description: DriverIC Operation supply (2.60-3.60V)
+  vddio-supply:
+    description: I/O voltage supply (1.62-1.98V)
+
+  port: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - elvdd-supply
+  - elvss-supply
+  - vcc-supply
+  - vci-supply
+  - vddio-supply
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,bf060y8m-aj0";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+            vcc-supply = <&disp_vcc_vreg>;
+            vddio-supply = <&disp_vddio_vreg>;
+            vci-supply = <&disp_vci_vreg>;
+            elvdd-supply = <&disp_elvdd_vreg>;
+            elvss-supply = <&disp_elvss_vreg>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,himax8279d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Boe Himax8279d 1200x1920 TFT LCD panel
+
+maintainers:
+  - Jerry Han <jerry.han.hq@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: boe,himax8279d8p
+      - const: boe,himax8279d10p
+
+  reg:
+    maxItems: 1
+
+  backlight: true
+  enable-gpios: true
+
+  pp33-gpios:
+    maxItems: 1
+    description: GPIO for the 3.3v pin that provides the supply voltage
+
+  pp18-gpios:
+    maxItems: 1
+    description: GPIO for the 1.8v pin that provides the supply voltage
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - pp33-gpios
+  - pp18-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,himax8279d8p", "boe,himax8279d10p";
+            reg = <0>;
+            backlight = <&backlight>;
+            enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+            pp33-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+            pp18-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/boe,td4320.yaml

@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,td4320.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TD4320 MIPI-DSI panels
+
+maintainers:
+  - Barnabas Czeman <barnabas.czeman@mainlining.org>
+
+description:
+  BOE TD4320 6.3" 1080x2340 panel found in Xiaomi Redmi Note 7 smartphone.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: boe,td4320
+
+  reg:
+    maxItems: 1
+
+  iovcc-supply:
+    description: I/O voltage rail
+
+  vsn-supply:
+    description: Negative source voltage rail
+
+  vsp-supply:
+    description: Positive source voltage rail
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "boe,td4320";
+            reg = <0>;
+            backlight = <&backlight>;
+            reset-gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml

@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,th101mb31ig002-28a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TH101MB31IG002-28A WXGA DSI Display Panel
+
+maintainers:
+  - Manuel Traut <manut@mecka.net>
+
+properties:
+  compatible:
+    enum:
+        # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel
+      - boe,th101mb31ig002-28a
+        # The Starry-er88577 is a 10.1" WXGA TFT-LCD panel
+      - starry,er88577
+
+  reg:
+    maxItems: 1
+
+  backlight: true
+  enable-gpios: true
+  reset-gpios: true
+  power-supply: true
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - power-supply
+
+allOf:
+  - $ref: panel-common.yaml#
+  - if:
+      properties:
+        compatible:
+          # The Starry-er88577 is a 10.1" WXGA TFT-LCD panel
+          const: starry,er88577
+    then:
+      properties:
+        reset-gpios: false
+    else:
+      required:
+        - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,th101mb31ig002-28a";
+            reg = <0>;
+            backlight = <&backlight_lcd0>;
+            enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 55 GPIO_ACTIVE_LOW>;
+            rotation = <90>;
+            power-supply = <&vcc_3v3>;
+            port {
+                panel_in_dsi: endpoint {
+                    remote-endpoint = <&dsi_out_con>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/boe,tv101wum-ll2.yaml

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-ll2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-LL2 DSI Display Panel
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: boe,tv101wum-ll2
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  backlight: true
+  reset-gpios: true
+  vsp-supply: true
+  vsn-supply: true
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vsp-supply
+  - vsn-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,tv101wum-ll2";
+            reg = <0>;
+
+            vsn-supply = <&vsn_lcd>;
+            vsp-supply = <&vsp_lcd>;
+
+            reset-gpios = <&pio 45 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml

@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-NL6 DSI Display Panel
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+        # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel
+      - boe,tv101wum-nl6
+        # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel
+      - auo,kd101n80-45na
+        # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel
+      - boe,tv101wum-n53
+        # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel
+      - auo,b101uan08.3
+        # BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel
+      - boe,tv105wum-nw0
+        # BOE TV110C9M-LL3 10.95" WUXGA TFT LCD panel
+      - boe,tv110c9m-ll3
+        # INX HJ110IZ-01A 10.95" WUXGA TFT LCD panel
+      - innolux,hj110iz-01a
+        # STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel
+      - starry,2081101qfh032011-53g
+        # STARRY ili9882t 10.51" WUXGA TFT LCD panel
+      - starry,ili9882t
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: a GPIO spec for the enable pin
+
+  pp1800-supply:
+    description: core voltage supply
+
+  pp3300-supply:
+    description: core voltage supply
+
+  avdd-supply:
+    description: phandle of the regulator that provides positive voltage
+
+  avee-supply:
+    description: phandle of the regulator that provides negative voltage
+
+  backlight:
+    description: phandle of the backlight device attached to the panel
+
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - pp1800-supply
+  - avdd-supply
+  - avee-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,tv101wum-nl6";
+            reg = <0>;
+            enable-gpios = <&pio 45 0>;
+            avdd-supply = <&ppvarn_lcd>;
+            avee-supply = <&ppvarp_lcd>;
+            pp1800-supply = <&pp1800_lcd>;
+            backlight = <&backlight_lcd0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/chipwealth,ch13726a.yaml

@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/chipwealth,ch13726a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chip Wealth Technology CH13726A AMOLED driver
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  Chip Wealth Technology CH13726A is a single-chip solution
+  for AMOLED connected using a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: ayntec,thor-panel-bottom
+      - const: chipwealth,ch13726a
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vdd-supply: true
+  vddio-supply: true
+  vdd1v2-supply: true
+  avdd-supply: true
+
+  port: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+  - vdd1v2-supply
+  - avdd-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "ayntec,thor-panel-bottom", "chipwealth,ch13726a";
+            reg = <0>;
+            vdd1v2-supply = <&vreg_l11b_1p2>;
+            vddio-supply = <&vdd_disp_1v8>;
+            vdd-supply = <&vreg_l13b_3p0>;
+            avdd-supply = <&vdd_disp2_2v8>;
+            reset-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/display-timing.txt

@@ -0,0 +1 @@
+See display-timings.yaml in this directory.

linux-7.2.3/Documentation/devicetree/bindings/display/panel/display-timings.yaml

@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: display timings
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  A display panel may be able to handle several display timings,
+  with different resolutions.
+  The display-timings node makes it possible to specify the timings
+  and to specify the timing that is native for the display.
+
+properties:
+  $nodename:
+    const: display-timings
+
+  native-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The default display timing is the one specified as native-mode.
+      If no native-mode is specified then the first node is assumed
+      to be the native mode.
+
+patternProperties:
+  "^timing":
+    type: object
+    $ref: panel-timing.yaml#
+
+additionalProperties: false
+
+examples:
+  - |+
+
+    /*
+     * Example that specifies panel timing using minimum, typical,
+     * maximum values as commonly used in datasheet description.
+     * timing1 is the native-mode.
+     */
+    display-timings {
+        native-mode = <&timing1>;
+        timing0 {
+            /* 1920x1080p24 */
+            clock-frequency = <148500000>;
+            hactive = <1920>;
+            vactive = <1080>;
+            hsync-len = <0 44 60>;
+            hfront-porch = <80 88 95>;
+            hback-porch = <100 148 160>;
+            vfront-porch = <0 4 6>;
+            vback-porch = <0 36 50>;
+            vsync-len = <0 5 6>;
+        };
+        timing1 {
+            /* 1920x1080p24 */
+            clock-frequency = <52000000>;
+            hactive = <1920>;
+            vactive = <1080>;
+            hfront-porch = <25>;
+            hback-porch = <25>;
+            hsync-len = <0 25 25>;
+            vback-porch = <2>;
+            vfront-porch = <2>;
+            vsync-len = <2>;
+            hsync-active = <1>;
+            pixelclk-active = <1>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.yaml

@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/dlc,dlc0700yzg-1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DLC Display Co. DLC0700YZG-1 7.0" WSVGA TFT LCD panel
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: dlc,dlc0700yzg-1
+
+  reset-gpios: true
+  enable-gpios: true
+  backlight: true
+  port: true
+
+required:
+  - compatible
+  - power-supply
+
+additionalProperties: false
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml

@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ebbg,ft8719.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EBBG FT8719 MIPI-DSI LCD panel
+
+maintainers:
+  - Joel Selvaraj <jo@jsfamily.in>
+
+description: |
+  The FT8719 panel from EBBG is a FHD+ LCD display panel with a resolution
+  of 1080x2246. It is a video mode DSI panel. The backlight is managed
+  through the QCOM WLED driver.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: ebbg,ft8719
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel of the peripheral
+
+  vddio-supply:
+    description: power IC supply regulator
+
+  vddpos-supply:
+    description: positive boost supply regulator
+
+  vddneg-supply:
+    description: negative boost supply regulator
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vddpos-supply
+  - vddneg-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      panel@0 {
+        compatible = "ebbg,ft8719";
+        reg = <0>;
+
+        vddio-supply = <&vreg_l14a_1p88>;
+        vddpos-supply = <&lab>;
+        vddneg-supply = <&ibb>;
+
+        reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+        backlight = <&pmi8998_wled>;
+
+        port {
+          ebbg_ft8719_in_0: endpoint {
+            remote-endpoint = <&dsi0_out>;
+          };
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/elida,kd35t133.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elida KD35T133 3.5in 320x480 DSI panel
+
+maintainers:
+  - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: elida,kd35t133
+
+  reg:
+    maxItems: 1
+
+  backlight: true
+  port: true
+  reset-gpios: true
+  rotation: true
+  iovcc-supply:
+    description: regulator that supplies the iovcc voltage
+  vdd-supply:
+    description: regulator that supplies the vdd voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - port
+  - iovcc-supply
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "elida,kd35t133";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vdd-supply = <&vcc3v3_lcd>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml

@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/fascontek,fs035vg158.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fascontek FS035VG158 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - John Watts <contact@jookia.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: fascontek,fs035vg158
+
+  reg:
+    maxItems: 1
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - reg
+  - port
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "fascontek,fs035vg158";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml

@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feixin,k101-im2ba02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feixin K101 IM2BA02 10.1" MIPI-DSI LCD panel
+
+maintainers:
+  - Icenowy Zheng <icenowy@aosc.io>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: feixin,k101-im2ba02
+
+  reg:
+    maxItems: 1
+
+  backlight: true
+  reset-gpios: true
+  avdd-supply:
+    description: regulator that supplies the AVDD voltage
+  dvdd-supply:
+    description: regulator that supplies the DVDD voltage
+  cvdd-supply:
+    description: regulator that supplies the CVDD voltage
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+  - cvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "feixin,k101-im2ba02";
+            reg = <0>;
+            avdd-supply = <&reg_dc1sw>;
+            dvdd-supply = <&reg_dc1sw>;
+            cvdd-supply = <&reg_ldo_io1>;
+            reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml

@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feiyang,fy07024di26a30d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: feiyang,fy07024di26a30d
+
+  reg:
+    description: DSI virtual channel used by that screen
+    maxItems: 1
+
+  avdd-supply:
+    description: analog regulator dc1 switch
+
+  dvdd-supply:
+    description: 3v3 digital regulator
+
+  port: true
+  reset-gpios: true
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "feiyang,fy07024di26a30d";
+            reg = <0>;
+            avdd-supply = <&reg_dc1sw>;
+            dvdd-supply = <&reg_dldo2>;
+            reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+            backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/focaltech,gpt3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Focaltech GPT3 3.0" (640x480 pixels) IPS LCD panel
+
+maintainers:
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: focaltech,gpt3
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "focaltech,gpt3";
+            reg = <0>;
+
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/focaltech,ota7290b.yaml

@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/focaltech,ota7290b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Focaltech OTA7290B DSI panels
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: waveshare,8.8-dsi-touch-a
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: supply regulator for VDD, usually 3.3V
+
+  vdda-supply:
+    description: supply regulator for VDDA, 7-10V
+
+  vcc-supply:
+    description: supply regulator for VCCIO, usually 1.5V
+
+  reset-gpios: true
+  backlight: true
+  rotation: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vcc-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "waveshare,8.8-dsi-touch-a";
+            reg = <0>;
+            vdd-supply = <&vdd>;
+            vcc-supply = <&vccio>;
+            reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
+

linux-7.2.3/Documentation/devicetree/bindings/display/panel/himax,hx8279.yaml

@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx8279.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX8279/HX8279-D based MIPI-DSI panels
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+  The Himax HX8279 is a 1803 channel outputs source driver with MIPI
+  TCON, which generates the horizontal and vertical control timing to
+  the source and gate drivers.
+  This DriverIC is most suitable for 1200x1920, 1080x1920, 1200x1600,
+  and 600x1024 panels and outputs full RGB888 over two or four lanes,
+  single or dual, MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aoly,sl101pm1794fog-v15
+          - startek,kd070fhfid078
+      - const: himax,hx8279
+
+  reg:
+    maxItems: 1
+
+  iovcc-supply:
+    description: I/O voltage supply
+
+  vdd-supply:
+    description: Panel power supply
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - reset-gpios
+  - iovcc-supply
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "startek,kd070fhfid078", "himax,hx8279";
+            reg = <0>;
+            backlight = <&backlight>;
+            enable-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+            iovcc-supply = <&vreg_lcm_vio>;
+            vdd-supply = <&vreg_lcm_vdd>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml

@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83102.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83102 MIPI-DSI LCD panel controller
+
+maintainers:
+  - Cong Yang <yangcong5@huaqin.corp-partner.google.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # Boe nv110wum-l60 11.0" WUXGA TFT LCD panel
+          - boe,nv110wum-l60
+          # CSOT pna957qt1-1 10.95" WUXGA TFT LCD panel
+          - csot,pna957qt1-1
+          # Holitech HTF065H045 6.517" 720x1600 TFT LCD panel
+          - holitech,htf065h045
+          # IVO t109nw41 11.0" WUXGA TFT LCD panel
+          - ivo,t109nw41
+          # KINGDISPLAY KD110N11-51IE 10.95" WUXGA TFT LCD panel
+          - kingdisplay,kd110n11-51ie
+          # STARRY 2082109QFH040022-50E 10.95" WUXGA TFT LCD panel
+          - starry,2082109qfh040022-50e
+          # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel
+          - starry,himax83102-j02
+          # Waveshare 12.3-DSI-TOUCH-A panel
+          - waveshare,12.3-dsi-touch-a
+      - const: himax,hx83102
+
+  reg:
+    description: the virtual channel number of a DSI peripheral
+
+  enable-gpios:
+    description: a GPIO spec for the enable pin
+
+  pp1800-supply:
+    description: core voltage supply
+
+  avdd-supply:
+    description: phandle of the regulator that provides positive voltage
+
+  avee-supply:
+    description: phandle of the regulator that provides negative voltage
+
+  backlight: true
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - pp1800-supply
+  - avdd-supply
+  - avee-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "starry,himax83102-j02", "himax,hx83102";
+            reg = <0>;
+            enable-gpios = <&pio 45 0>;
+            avdd-supply = <&ppvarn_lcd>;
+            avee-supply = <&ppvarp_lcd>;
+            pp1800-supply = <&pp1800_lcd>;
+            backlight = <&backlight_lcd0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml

@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83112a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83112A-based DSI display panels
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description:
+  The Himax HX83112A is a generic DSI Panel IC used to control
+  LCD panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: djn,9a-3r063-1102b
+
+  reg:
+    maxItems: 1
+
+  vdd1-supply:
+    description: Digital voltage rail
+
+  vsn-supply:
+    description: Positive source voltage rail
+
+  vsp-supply:
+    description: Negative source voltage rail
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vdd1-supply
+  - vsn-supply
+  - vsp-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "djn,9a-3r063-1102b";
+            reg = <0>;
+
+            backlight = <&pm6150l_wled>;
+            reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+            vdd1-supply = <&vreg_l1e>;
+            vsn-supply = <&pm6150l_lcdb_ncp>;
+            vsp-supply = <&pm6150l_lcdb_ldo>;
+
+            port {
+                panel_in_0: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/himax,hx83112b.yaml

@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83112b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83112B-based DSI display panels
+
+maintainers:
+  - Luca Weiss <luca@lucaweiss.eu>
+
+description:
+  The Himax HX83112B is a generic DSI Panel IC used to control
+  LCD panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: djn,98-03057-6598b-i
+
+  reg:
+    maxItems: 1
+
+  iovcc-supply:
+    description: I/O voltage rail
+
+  vsn-supply:
+    description: Positive source voltage rail
+
+  vsp-supply:
+    description: Negative source voltage rail
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - iovcc-supply
+  - vsn-supply
+  - vsp-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "djn,98-03057-6598b-i";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+
+            iovcc-supply = <&pm8953_l6>;
+            vsn-supply = <&pmi632_lcdb_ncp>;
+            vsp-supply = <&pmi632_lcdb_ldo>;
+
+            port {
+                panel_in_0: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/himax,hx83121a.yaml

@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83121a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83121A based DSI display Panels
+
+maintainers:
+  - Pengyu Luo <mitltlatltl@gmail.com>
+
+description:
+  The Himax HX83121A is a generic DSI Panel IC used to drive dsi
+  panels. Support video mode panels from China Star Optoelectronics
+  Technology (CSOT) and BOE Technology.
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - boe,ppc357db1-4
+          - csot,ppc357db1-4
+      - const: himax,hx83121a
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  avdd-supply:
+    description: analog positive supply for IC
+
+  avee-supply:
+    description: analog negative supply for IC
+
+  vddi-supply:
+    description: power supply for IC
+
+  backlight: true
+  ports: true
+
+required:
+  - compatible
+  - reg
+  - vddi-supply
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "csot,ppc357db1-4", "himax,hx83121a";
+            reg = <0>;
+
+            vddi-supply = <&vreg_l2b>;
+            reset-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in_0: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1{
+                    reg = <1>;
+                    panel_in_1: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml

@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx8394.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX8394 MIPI-DSI LCD panel controller
+
+maintainers:
+  - Ondrej Jirman <megi@xff.cz>
+  - Javier Martinez Canillas <javierm@redhat.com>
+
+description:
+  Device tree bindings for panels based on the Himax HX8394 controller,
+  such as the HannStar HSD060BHW4 720x1440 TFT LCD panel connected with
+  a MIPI-DSI video interface.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - hannstar,hsd060bhw4
+              - microchip,ac40t08a-mipi-panel
+              - powkiddy,x55-panel
+              - waveshare,5.0-dsi-touch-a
+              - waveshare,5.5-dsi-touch-a
+          - const: himax,hx8394
+      - items:
+          - enum:
+              - huiling,hl055fhav028c
+          - const: himax,hx8399c
+
+  reg:
+    maxItems: 1
+
+  reset-gpios: true
+  backlight: true
+  rotation: true
+  port: true
+
+  vcc-supply:
+    description: Panel power supply
+
+  iovcc-supply:
+    description: I/O voltage supply
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - port
+  - vcc-supply
+  - iovcc-supply
+
+allOf:
+  - $ref: panel-common.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - microchip,ac40t08a-mipi-panel
+    then:
+      required:
+        - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "hannstar,hsd060bhw4", "himax,hx8394";
+            reg = <0>;
+            vcc-supply = <&reg_2v8_p>;
+            iovcc-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/hydis,hv101hd1.yaml

@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/hydis,hv101hd1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hydis HV101HD1 DSI Display Panel
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: hydis,hv101hd1
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vio-supply: true
+
+  backlight: true
+  port: true
+
+required:
+  - compatible
+  - vdd-supply
+  - vio-supply
+  - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "hydis,hv101hd1";
+            reg = <0>;
+
+            vdd-supply = <&vdd_lcd>;
+            vio-supply = <&vddio_lcd>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml

@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,il79900a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek IL79900a based MIPI-DSI panels
+
+maintainers:
+  - Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - tianma,tl121bvms07-00
+      - const: ilitek,il79900a
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel used by the panel
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO specifier for the enable pin
+
+  avdd-supply:
+    description: Positive analog voltage supply (AVDD)
+
+  avee-supply:
+    description: Negative analog voltage supply (AVEE)
+
+  pp1800-supply:
+    description: 1.8V logic voltage supply
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - avdd-supply
+  - avee-supply
+  - pp1800-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "tianma,tl121bvms07-00", "ilitek,il79900a";
+            reg = <0>;
+            enable-gpios = <&pio 25 0>;
+            avdd-supply = <&reg_avdd>;
+            avee-supply = <&reg_avee>;
+            pp1800-supply = <&reg_pp1800>;
+            backlight = <&backlight>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml

@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9163.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9163 display panels
+
+maintainers:
+  - Daniel Mack <daniel@zonque.org>
+
+description:
+  This binding is for display panels using an Ilitek ILI9163 controller in SPI
+  mode.
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - newhaven,1.8-128160EF
+      - const: ilitek,ili9163
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 32000000
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX)
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            display@0 {
+                    compatible = "newhaven,1.8-128160EF", "ilitek,ili9163";
+                    reg = <0>;
+                    spi-max-frequency = <32000000>;
+                    dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+                    rotation = <180>;
+                    backlight = <&backlight>;
+            };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml

@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9322.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9322 TFT panel driver with SPI control bus
+
+maintainers:
+  - Linus Walleij <linusw@kernel.org>
+
+description: |
+  This is a driver for 320x240 TFT panels, accepting a variety of input
+  streams that get adapted and scaled to the panel. The panel output has
+  960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
+  VCOMH outputs.
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - dlink,dir-685-panel
+      - const: ilitek,ili9322
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Core voltage supply
+
+  iovcc-supply:
+    description: Voltage supply for the interface input/output signals
+
+  vci-supply:
+    description: Voltage supply for analog parts
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel: display@0 {
+            compatible = "dlink,dir-685-panel", "ilitek,ili9322";
+            reg = <0>;
+            vcc-supply = <&vdisp>;
+            iovcc-supply = <&vdisp>;
+            vci-supply = <&vdisp>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml

@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9341.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek-9341 Display Panel
+
+maintainers:
+  - Dillon Min <dillon.minfei@gmail.com>
+
+description: |
+  Ilitek ILI9341 TFT panel driver with SPI control bus
+  This is a driver for 320x240 TFT panels, accepting a rgb input
+  streams with 16 bits or 18 bits.
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - adafruit,yx240qv29
+          # ili9341 240*320 Color on stm32f429-disco board
+          - st,sf-tc240t-9370-t
+          - canaan,kd233-tft
+      - const: ilitek,ili9341
+
+  reg:
+    maxItems: 1
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX) of this DBI panel
+
+  spi-3wire: true
+
+  spi-max-frequency:
+    const: 10000000
+
+  vci-supply:
+    description: Analog voltage supply (2.5 .. 3.3V)
+
+  vddi-supply:
+    description: Voltage supply for interface logic (1.65 .. 3.3 V)
+
+  vddi-led-supply:
+    description: Voltage supply for the LED driver (1.65 .. 3.3 V)
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,sf-tc240t-9370-t
+then:
+  required:
+    - port
+
+unevaluatedProperties: false
+
+examples:
+  - |+
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel: display@0 {
+            compatible = "st,sf-tc240t-9370-t",
+                         "ilitek,ili9341";
+            reg = <0>;
+            spi-3wire;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpiod 13 0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+        display@1{
+            compatible = "adafruit,yx240qv29", "ilitek,ili9341";
+            reg = <1>;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+            rotation = <270>;
+            backlight = <&backlight>;
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml

@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9805 based MIPI-DSI panels
+
+maintainers:
+  - Michael Trimarchi <michael@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - giantplus,gpm1790a0
+          - tianma,tm041xdhg01
+      - const: ilitek,ili9805
+
+  reg:
+    maxItems: 1
+
+  avdd-supply: true
+  dvdd-supply: true
+
+required:
+  - compatible
+  - avdd-supply
+  - dvdd-supply
+  - reg
+  - reset-gpios
+  - port
+  - backlight
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "giantplus,gpm1790a0", "ilitek,ili9805";
+            reg = <0>;
+            avdd-supply = <&avdd_display>;
+            dvdd-supply = <&dvdd_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_dsi_out>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml

@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9806E based panels
+
+maintainers:
+  - Michael Walle <mwalle@kernel.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - densitron,dmt028vghmcmi-1d
+          - ortustech,com35h3p70ulc
+          - rocktech,rk050hr345-ct106a
+      - const: ilitek,ili9806e
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vccio-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - reset-gpios
+  - backlight
+  - port
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rocktech,rk050hr345-ct106a
+then:
+  $ref: /schemas/spi/spi-peripheral-props.yaml#
+  required:
+    - spi-max-frequency
+else:
+  required:
+    - vccio-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "ortustech,com35h3p70ulc", "ilitek,ili9806e";
+            reg = <0>;
+            vdd-supply = <&reg_vdd_panel>;
+            vccio-supply = <&reg_vccio_panel>;
+            reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "rocktech,rk050hr345-ct106a", "ilitek,ili9806e";
+            reg = <0>;
+            vdd-supply = <&reg_vdd_panel>;
+            spi-max-frequency = <10000000>;
+            reset-gpios = <&gpiob 6 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+            port {
+                panel_in_rgb: endpoint {
+                    remote-endpoint = <&ltdc_out_rgb>;
+                };
+            };
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml

@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9881c based MIPI-DSI panels
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ampire,am8001280g
+          - bananapi,lhr050h41
+          - bestar,bsd1218-a101kl68
+          - feixin,k101-im2byl02
+          - raspberrypi,dsi-5inch
+          - raspberrypi,dsi-7inch
+          - startek,kd050hdfia020
+          - tdo,tl050hdv35
+          - waveshare,7.0-dsi-touch-a
+          - wanchanglong,w552946aaa
+          - wanchanglong,w552946aba
+      - const: ilitek,ili9881c
+
+  reg:
+    maxItems: 1
+
+  backlight: true
+  port: true
+  power-supply: true
+  iovcc-supply: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - power-supply
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+            reg = <0>;
+            power-supply = <&reg_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&pwm_bl>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml

@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,ee101ia-01d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux Corporation 10.1" EE101IA-01D WXGA (1280x800) LVDS panel
+
+maintainers:
+  - Heiko Stuebner <heiko.stuebner@bq.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: innolux,ee101ia-01d
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: innolux,ee101ia-01d
+      - const: panel-lvds
+
+  backlight: true
+  data-mapping: true
+  enable-gpios: true
+  power-supply: true
+  width-mm: true
+  height-mm: true
+  panel-timing: true
+  port: true
+
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+additionalProperties: false
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,ej030na.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux EJ030NA 3.0" (320x480 pixels) 24-bit TFT LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: innolux,ej030na
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "innolux,ej030na";
+            reg = <0>;
+
+            spi-max-frequency = <10000000>;
+
+            reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
+            power-supply = <&lcd_power>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml

@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,p097pfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
+
+maintainers:
+  - Lin Huang <hl@rock-chips.com>
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    const: innolux,p097pfg
+
+  reg:
+    maxItems: 1
+
+  backlight: true
+  enable-gpios: true
+
+  avdd-supply:
+    description: The regulator that provides positive voltage
+
+  avee-supply:
+    description: The regulator that provides negative voltage
+
+  port: true
+  ports: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - avee-supply
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "innolux,p097pfg";
+            reg = <0>;
+            avdd-supply = <&avdd>;
+            avee-supply = <&avee>;
+            backlight = <&backlight>;
+            enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    mipi_in_panel: endpoint {
+                        remote-endpoint = <&mipi_out_panel>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    mipi1_in_panel: endpoint {
+                        remote-endpoint = <&mipi1_out_panel>;
+                    };
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml

@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jadard,jd9365da-h3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Jadard JD9365DA-HE WXGA DSI panel
+
+maintainers:
+  - Jagan Teki <jagan@edgeble.ai>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - anbernic,rg-ds-display-bottom
+          - anbernic,rg-ds-display-top
+          - chongzhou,cz101b4001
+          - kingdisplay,kd101ne3-40ti
+          - melfas,lmfbx101117480
+          - radxa,display-10hd-ad001
+          - radxa,display-8hd-ad002
+          - taiguanck,xti05101-01a
+          - waveshare,3.4-dsi-touch-c
+          - waveshare,4.0-dsi-touch-c
+          - waveshare,8.0-dsi-touch-a
+          - waveshare,9.0-dsi-touch-b
+          - waveshare,10.1-dsi-touch-a
+          - waveshare,10.1-dsi-touch-b
+      - const: jadard,jd9365da-h3
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: supply regulator for VDD, usually 3.3V
+
+  vccio-supply:
+    description: supply regulator for VCCIO, usually 1.8V
+
+  reset-gpios: true
+  backlight: true
+  rotation: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vccio-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "chongzhou,cz101b4001", "jadard,jd9365da-h3";
+            reg = <0>;
+            vdd-supply = <&lcd_3v3>;
+            vccio-supply = <&vcca_1v8>;
+            reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml

@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jdi,lpm102a188a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: JDI LPM102A188A 2560x1800 10.2" DSI Panel
+
+maintainers:
+  - Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
+
+description: |
+  This panel requires a dual-channel DSI host to operate. It supports two modes:
+  - left-right: each channel drives the left or right half of the screen
+  - even-odd: each channel drives the even or odd lines of the screen
+
+  Each of the DSI channels controls a separate DSI peripheral. The peripheral
+  driven by the first link (DSI-LINK1) is considered the primary peripheral
+  and controls the device. The 'link2' property contains a phandle to the
+  peripheral driven by the second link (DSI-LINK2).
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: jdi,lpm102a188a
+
+  reg:
+    maxItems: 1
+
+  enable-gpios: true
+  reset-gpios: true
+  power-supply: true
+  backlight: true
+
+  ddi-supply:
+    description: The regulator that provides IOVCC (1.8V).
+
+  link2:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to the DSI peripheral on the secondary link. Note that the
+      presence of this property marks the containing node as DSI-LINK1.
+
+required:
+  - compatible
+  - reg
+
+if:
+  required:
+    - link2
+then:
+  required:
+    - power-supply
+    - ddi-supply
+    - enable-gpios
+    - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+
+    dsia: dsi@54300000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x0 0x54300000 0x0 0x00040000>;
+
+        link2: panel@0 {
+            compatible = "jdi,lpm102a188a";
+            reg = <0>;
+        };
+    };
+
+    dsib: dsi@54400000{
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x0 0x54400000 0x0 0x00040000>;
+        nvidia,ganged-mode = <&dsia>;
+
+        link1: panel@0 {
+            compatible = "jdi,lpm102a188a";
+            reg = <0>;
+            power-supply = <&pplcd_vdd>;
+            ddi-supply = <&pp1800_lcdio>;
+            enable-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+            link2 = <&link2>;
+            backlight = <&backlight>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml

@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+maintainers:
+  - Vinay Simha BN <simhavcs@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: jdi,lt070me05000
+
+  reg:
+    maxItems: 1
+
+  enable-gpios: true
+  reset-gpios: true
+
+  vddp-supply:
+    description: |
+      The regulator that provides the supply voltage Power IC supply (3-5V)
+
+  iovcc-supply:
+    description: |
+      The regulator that provides the supply voltage IOVCC,
+      power supply for LCM (1.8V)
+
+  dcdc-en-gpios:
+    maxItems: 1
+    description: |
+      phandle of the gpio for power ic line
+      Power IC supply enable, High active
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vddp-supply
+  - iovcc-supply
+  - enable-gpios
+  - reset-gpios
+  - dcdc-en-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "jdi,lt070me05000";
+            reg = <0>;
+
+            vddp-supply = <&pm8921_l17>;
+            iovcc-supply = <&pm8921_lvs7>;
+
+            enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+            dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml

@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/kingdisplay,kd035g6-54nt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: kingdisplay,kd035g6-54nt
+
+  reg:
+    maxItems: 1
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "kingdisplay,kd035g6-54nt";
+            reg = <0>;
+
+            spi-max-frequency = <3125000>;
+            spi-3wire;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&ldo6>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml

@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: leadtek,ltk035c5444t
+
+  reg:
+    maxItems: 1
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - reg
+  - port
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "leadtek,ltk035c5444t";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml

@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel
+
+maintainers:
+  - Quentin Schulz <quentin.schulz@theobroma-systems.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - leadtek,ltk050h3146w
+      - leadtek,ltk050h3146w-a2
+      - leadtek,ltk050h3148w
+
+  reg:
+    maxItems: 1
+
+  backlight: true
+  port: true
+  reset-gpios: true
+
+  iovcc-supply:
+    description: regulator that supplies the iovcc voltage
+  vci-supply:
+    description: regulator that supplies the vci voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - iovcc-supply
+  - vci-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "leadtek,ltk050h3146w";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vci-supply = <&vcc3v3_lcd>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml

@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk500hd1829.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek LTK500HD1829 5.0in 720x1280 DSI panel
+
+maintainers:
+  - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - leadtek,ltk101b4029w
+      - leadtek,ltk500hd1829
+
+  reg:
+    maxItems: 1
+
+  backlight: true
+  port: true
+  reset-gpios: true
+
+  iovcc-supply:
+    description: regulator that supplies the iovcc voltage
+  vcc-supply:
+    description: regulator that supplies the vcc voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - iovcc-supply
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "leadtek,ltk500hd1829";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vcc-supply = <&vcc_2v8>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml

@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lg,ld070wx3-sl01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG Corporation 7" WXGA TFT LCD panel
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: lg,ld070wx3-sl01
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vcc-supply: true
+
+  backlight: true
+  port: true
+
+required:
+  - compatible
+  - vdd-supply
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "lg,ld070wx3-sl01";
+            reg = <0>;
+
+            vdd-supply = <&vdd_3v3_lcd>;
+            vcc-supply = <&vcc_1v8_lcd>;
+
+            backlight = <&backlight>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml

@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lg,lg4573.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG LG4573 TFT Liquid Crystal Display with SPI control bus
+
+description: |
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Heiko Schocher <hs@denx.de>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: lg,lg4573
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lcd_panel: display@0 {
+            compatible = "lg,lg4573";
+            spi-max-frequency = <10000000>;
+            reg = <0>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml

@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lg,sw43408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG SW43408 AMOLED DDIC
+
+maintainers:
+  - Casey Connolly <casey.connolly@linaro.org>
+
+description:
+  The SW43408 is display driver IC with connected panel.
+
+  LG LH546WF1-ED01 panel is used on the Pixel 3, it is a 60hz OLED panel
+  which required DSC (Display Stream Compression) and has rounded corners.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+            # LG 5.46 inch, 1080x2160 pixels, 18:9 ratio
+          - lg,sw43408-lh546wf1-ed01
+      - const: lg,sw43408
+
+  reg:
+    maxItems: 1
+
+  port: true
+  vddi-supply: true
+  vpnl-supply: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - vddi-supply
+  - vpnl-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "lg,sw43408-lh546wf1-ed01", "lg,sw43408";
+            reg = <0>;
+
+            vddi-supply = <&vreg_l14a_1p88>;
+            vpnl-supply = <&vreg_l28a_3p0>;
+
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml

@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lgphilips,lb035q02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG.Philips LB035Q02 Panel
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: lgphilips,lb035q02
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - enable-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel: panel@0 {
+            compatible = "lgphilips,lb035q02";
+            reg = <0>;
+            spi-max-frequency = <100000>;
+            spi-cpol;
+            spi-cpha;
+
+            label = "lcd";
+
+            enable-gpios = <&gpio7 7 0>;
+
+            port {
+                lcd_in: endpoint {
+                    remote-endpoint = <&dpi_out>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
+
+maintainers:
+  - Adam Ford <aford173@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: logicpd,type28
+
+  power-supply: true
+  enable-gpios: true
+  backlight: true
+  port: true
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    lcd0: display {
+      compatible = "logicpd,type28";
+      enable-gpios = <&gpio5 27 0>;
+      backlight = <&backlight>;
+      port {
+        lcd_in: endpoint {
+          remote-endpoint = <&dpi_out>;
+        };
+      };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/lxd,m9189a.yaml

@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lxd,m9189a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LXD M9189A DSI Display Panel
+
+maintainers:
+  - Michael Tretter <m.tretter@pengutronix.de>
+
+allOf:
+  - $ref: panel-common.yaml
+
+properties:
+  compatible:
+    const: lxd,m9189a
+
+  reg:
+    maxItems: 1
+
+  standby-gpios:
+    description: GPIO used for the standby pin
+    maxItems: 1
+
+  reset-gpios: true
+  power-supply: true
+  backlight: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - standby-gpios
+  - reset-gpios
+  - power-supply
+  - backlight
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      panel@0 {
+        compatible = "lxd,m9189a";
+        reg = <0>;
+        backlight = <&backlight>;
+        reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+        standby-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+        power-supply = <&reg_display_3v3>;
+
+        port {
+          mipi_panel_in: endpoint {
+            remote-endpoint = <&mipi_dsi_out>;
+          };
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml

@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mantix MLAF057WE51-X 5.7" 720x1440 TFT LCD panel
+
+maintainers:
+  - Guido Günther <agx@sigxcpu.org>
+
+description:
+  Mantix MLAF057WE51 X is a 720x1440 TFT LCD panel connected using
+  a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mantix,mlaf057we51-x
+      - ys,ys57pss36bh5gq
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  avdd-supply:
+    description: Positive analog power supply
+
+  avee-supply:
+    description: Negative analog power supply
+
+  vddi-supply:
+    description: 1.8V I/O voltage supply
+
+  mantix,tp-rstn-gpios:
+    maxItems: 1
+    description: second reset line that triggers DSI config load
+
+  backlight: true
+  port: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - avee-supply
+  - vddi-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "mantix,mlaf057we51-x";
+            reg = <0>;
+            avdd-supply = <&reg_avdd>;
+            avee-supply = <&reg_avee>;
+            vddi-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+            mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml

@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mitsubishi,aa104xd12.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mitsubishi AA104XD12 10.4" XGA LVDS Display Panel
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: mitsubishi,aa104xd12
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: mitsubishi,aa104xd12
+      - const: panel-lvds
+
+  vcc-supply:
+    description: Reference to the regulator powering the panel VCC pins.
+
+  data-mapping:
+    enum:
+      - jeida-18
+      - jeida-24
+
+  width-mm:
+    const: 210
+
+  height-mm:
+    const: 158
+
+  backlight: true
+  panel-timing: true
+  port: true
+
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+additionalProperties: false
+
+examples:
+  - |+
+
+    panel {
+      compatible = "mitsubishi,aa104xd12", "panel-lvds";
+      vcc-supply = <&vcc_3v3>;
+
+      width-mm = <210>;
+      height-mm = <158>;
+
+      data-mapping = "jeida-24";
+
+      panel-timing {
+        /* 1024x768 @65Hz */
+        clock-frequency = <65000000>;
+        hactive = <1024>;
+        vactive = <768>;
+        hsync-len = <136>;
+        hfront-porch = <20>;
+        hback-porch = <160>;
+        vfront-porch = <3>;
+        vback-porch = <29>;
+        vsync-len = <6>;
+      };
+
+      port {
+        panel_in: endpoint {
+          remote-endpoint = <&lvds_encoder>;
+        };
+      };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml

@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mitsubishi,aa121td01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mitsubishi AA121TD01 12.1" WXGA LVDS Display Panel
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: mitsubishi,aa121td01
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: mitsubishi,aa121td01
+      - const: panel-lvds
+
+  vcc-supply:
+    description: Reference to the regulator powering the panel VCC pins.
+
+  data-mapping:
+    const: jeida-24
+
+  width-mm:
+    const: 261
+
+  height-mm:
+    const: 163
+
+  panel-timing: true
+  port: true
+
+required:
+  - compatible
+  - vcc-supply
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+additionalProperties: false
+
+examples:
+  - |+
+    panel {
+      compatible = "mitsubishi,aa121td01", "panel-lvds";
+      vcc-supply = <&vcc_3v3>;
+
+      width-mm = <261>;
+      height-mm = <163>;
+
+      data-mapping = "jeida-24";
+
+      panel-timing {
+        /* 1280x800 @60Hz */
+        clock-frequency = <71000000>;
+        hactive = <1280>;
+        vactive = <800>;
+        hsync-len = <70>;
+        hfront-porch = <20>;
+        hback-porch = <70>;
+        vsync-len = <5>;
+        vfront-porch = <3>;
+        vback-porch = <15>;
+      };
+
+      port {
+        panel_in: endpoint {
+          remote-endpoint = <&lvds_encoder>;
+        };
+      };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/motorola,mot-panel.yaml

@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/motorola,mot-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atrix 4G and Droid X2 DSI Display Panel
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+  Atrix 4G and Droid X2 use the same 540x960 DSI video mode panel. Exact
+  panel vendor and model are unknown hence generic compatible based on the
+  board name "Mot" is used.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: motorola,mot-panel
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator for main power supply.
+
+  vddio-supply:
+    description: Regulator for 1.8V IO power supply.
+
+  backlight: true
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "motorola,mot-panel";
+            reg = <0>;
+
+            reset-gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+
+            vdd-supply = <&vdd_5v0_panel>;
+            vddio-supply = <&vdd_1v8_vio>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/nec,nl8048hl11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NEC NL8048HL11 4.1" WVGA TFT LCD panel
+
+description:
+  The NEC NL8048HL11 is a 4.1" WVGA TFT LCD panel with a 24-bit RGB parallel
+  data interface and an SPI control interface.
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: nec,nl8048hl11
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      lcd_panel: panel@0 {
+        compatible = "nec,nl8048hl11";
+        reg = <0>;
+        spi-max-frequency = <10000000>;
+
+        reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
+
+        port {
+          lcd_in: endpoint {
+            remote-endpoint = <&dpi_out>;
+          };
+        };
+      };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml

@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/newvision,nv3051d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NewVision NV3051D based LCD panel
+
+description: |
+  The NewVision NV3051D is a driver chip used to drive DSI panels.
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - anbernic,rg351v-panel
+          - anbernic,rg353p-panel
+          - powkiddy,rk2023-panel
+      - const: newvision,nv3051d
+
+  reg:
+    maxItems: 1
+
+  backlight: true
+  port: true
+  reset-gpios:
+    description: Active low reset GPIO
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "anbernic,rg353p-panel", "newvision,nv3051d";
+            reg = <0>;
+            backlight = <&backlight>;
+            reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc3v3_lcd>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35510.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35510-based display panels
+
+maintainers:
+  - Linus Walleij <linusw@kernel.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - frida,frd400b25025
+          - hydis,hva40wv1
+      - const: novatek,nt35510
+    description: This indicates the panel manufacturer of the panel
+      that is in turn using the NT35510 panel driver. The compatible
+      string determines how the NT35510 panel driver shall be configured
+      to work with the indicated panel. The novatek,nt35510 compatible shall
+      always be provided as a fallback.
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: regulator that supplies the vdd voltage
+  vddi-supply:
+    description: regulator that supplies the vddi voltage
+
+  backlight: true
+  port: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "hydis,hva40wv1", "novatek,nt35510";
+            reg = <0>;
+            vdd-supply = <&ab8500_ldo_aux4_reg>;
+            vddi-supply = <&ab8500_ldo_aux6_reg>;
+            reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+            backlight = <&gpio_bl>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/novatek,nt35532.yaml

@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35532.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35532-based DSI display panels
+
+maintainers:
+  - Cristian Cozzolino <cristian_ci@protonmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - flipkart,rimob-panel-nt35532-cs
+      - const: novatek,nt35532
+
+  reg:
+    maxItems: 1
+
+  backlight: true
+  reset-gpios: true
+
+  avdd-supply:
+    description: positive boost supply regulator
+
+  avee-supply:
+    description: negative boost supply regulator
+
+  vci-supply:
+    description: regulator that supplies the analog voltage
+
+  vddam-supply:
+    description: power supply for MIPI interface
+
+  vddi-supply:
+    description: regulator that supplies the I/O voltage
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vddi-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "flipkart,rimob-panel-nt35532-cs", "novatek,nt35532";
+            reg = <0>;
+
+            backlight = <&pmi8950_wled>;
+            reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+            avdd-supply = <&lab>;
+            avee-supply = <&ibb>;
+            vci-supply = <&pm8953_l17>;
+            vddi-supply = <&pm8953_l6>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml

@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35950-based display panels
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels,
+  with Static RAM for content retention in command mode and also supports
+  video mode with VESA Frame Buffer Compression or Display Stream Compression
+  on single, or dual dsi port(s).
+  This DDIC is also capable of upscaling an input image to the panel's native
+  resolution, for example it can upscale a 1920x1080 input to 3840x2160 with
+  either bilinear interpolation or pixel duplication.
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sharp,ls055d1sx04
+      - const: novatek,nt35950
+    description: This indicates the panel manufacturer of the panel
+      that is in turn using the NT35950 panel driver. The compatible
+      string determines how the NT35950 panel driver shall be configured
+      to work with the indicated panel. The novatek,nt35950 compatible shall
+      always be provided as a fallback.
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be 8mA, gpio
+      can be configured using mux, pinctrl, pinctrl-names (active high)
+
+  avdd-supply:
+    description: positive boost supply regulator
+  avee-supply:
+    description: negative boost supply regulator
+  dvdd-supply:
+    description: regulator that supplies the digital voltage
+  vddio-supply:
+    description: regulator that supplies the I/O voltage
+
+  backlight: true
+  ports: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - avdd-supply
+  - avee-supply
+  - dvdd-supply
+  - vddio-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls055d1sx04", "novatek,nt35950";
+            reg = <0>;
+
+            backlight = <&pmi8998_wled>;
+            reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+            avdd-supply = <&lab>;
+            avee-supply = <&ibb>;
+            dvdd-supply = <&disp_dvdd_vreg>;
+            vddio-supply = <&vreg_l14a_1p85>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in0: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    panel_in1: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml

@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36523.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36523 based DSI display Panels
+
+maintainers:
+  - Jianhua Lu <lujianhua000@gmail.com>
+
+description: |
+  The Novatek NT36523 is a generic DSI Panel IC used to drive dsi
+  panels. Support video mode panels from China Star Optoelectronics
+  Technology (CSOT) and BOE Technology.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - xiaomi,elish-boe-nt36523
+              - xiaomi,elish-csot-nt36523
+          - const: novatek,nt36523
+      - items:
+          - enum:
+              - lenovo,j606f-boe-nt36523w
+          - const: novatek,nt36523w
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be 8mA
+
+  vddio-supply:
+    description: regulator that supplies the I/O voltage
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - reset-gpios
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - novatek,nt36523w
+    then:
+      properties:
+        ports:
+          properties:
+            port@1: false
+    else:
+      properties:
+        port: false
+        ports:
+          required:
+            - port@1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "xiaomi,elish-csot-nt36523", "novatek,nt36523";
+            reg = <0>;
+
+            vddio-supply = <&vreg_l14a_1p88>;
+            reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in_0: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1{
+                    reg = <1>;
+                    panel_in_1: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml

@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36672a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36672A based DSI display Panels
+
+maintainers:
+  - Sumit Semwal <sumit.semwal@linaro.org>
+
+description: |
+  The nt36672a IC from Novatek is a generic DSI Panel IC used to drive dsi
+  panels.
+  Right now, support is added only for a Tianma FHD+ LCD display panel with a
+  resolution of 1080x2246. It is a video mode DSI panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - tianma,fhd-video
+      - const: novatek,nt36672a
+    description: This indicates the panel manufacturer of the panel that is
+      in turn using the NT36672A panel driver. This compatible string
+      determines how the NT36672A panel driver is configured for the indicated
+      panel. The novatek,nt36672a compatible shall always be provided as a fallback.
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be 8mA, gpio
+      can be configured using mux, pinctrl, pinctrl-names (active high)
+
+  vddio-supply:
+    description: phandle of the regulator that provides the supply voltage
+      Power IC supply
+
+  vddpos-supply:
+    description: phandle of the positive boost supply regulator
+
+  vddneg-supply:
+    description: phandle of the negative boost supply regulator
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vddpos-supply
+  - vddneg-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |+
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "tianma,fhd-video", "novatek,nt36672a";
+            reg = <0>;
+            vddio-supply = <&vreg_l14a_1p88>;
+            vddpos-supply = <&lab>;
+            vddneg-supply = <&ibb>;
+
+            backlight = <&pmi8998_wled>;
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+            port {
+                tianma_nt36672a_in_0: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/novatek,nt36672e.yaml

@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36672e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36672E LCD DSI Panel
+
+maintainers:
+  - Ritesh Kumar <quic_riteshk@quicinc.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: novatek,nt36672e
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddi-supply: true
+  avdd-supply: true
+  avee-supply: true
+  port: true
+  reset-gpios: true
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - vddi-supply
+  - avdd-supply
+  - avee-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "novatek,nt36672e";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+
+            vddi-supply = <&vreg_l8c_1p8>;
+            avdd-supply = <&disp_avdd>;
+            avee-supply = <&disp_avee>;
+
+            backlight = <&pwm_backlight>;
+
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/novatek,nt37801.yaml

@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt37801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT37801 AMOLED DSI Panel
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  Naming is inconclusive and different sources claim this is either Novatek
+  NT37801 or NT37810 AMOLED DSI Panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: novatek,nt37801
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vci-supply: true
+  vdd-supply: true
+  vddio-supply: true
+  port: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - vci-supply
+  - vdd-supply
+  - vddio-supply
+  - port
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "novatek,nt37801";
+            reg = <0>;
+
+            vci-supply = <&vreg_l13b_3p0>;
+            vdd-supply = <&vreg_l11b_1p2>;
+            vddio-supply = <&vreg_l12b_1p8>;
+
+            reset-gpios = <&tlmm 98 GPIO_ACTIVE_LOW>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Olimex Ltd. LCD-OLinuXino bridge panel.
+
+maintainers:
+  - Stefan Mavrodiev <stefan@olimex.com>
+
+description: |
+  This device can be used as bridge between a host controller and LCD panels.
+  Currently supported LCDs are:
+    - LCD-OLinuXino-4.3TS
+    - LCD-OLinuXino-5
+    - LCD-OLinuXino-7
+    - LCD-OLinuXino-10
+
+  The panel itself contains:
+    - AT24C16C EEPROM holding panel identification and timing requirements
+    - AR1021 resistive touch screen controller (optional)
+    - FT5x6 capacitive touch screen controller (optional)
+    - GT911/GT928 capacitive touch screen controller (optional)
+
+  The above chips share same I2C bus. The EEPROM is factory preprogrammed with
+  device information (id, serial, etc.) and timing requirements.
+
+  Touchscreen bingings can be found in these files:
+    - input/touchscreen/goodix.yaml
+    - input/touchscreen/edt-ft5x06.txt
+    - input/touchscreen/ar1021.txt
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: olimex,lcd-olinuxino
+
+  reg:
+    maxItems: 1
+
+  backlight: true
+  enable-gpios: true
+  power-supply: true
+
+required:
+  - compatible
+  - reg
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@50 {
+            compatible = "olimex,lcd-olinuxino";
+            reg = <0x50>;
+            power-supply = <&reg_vcc5v0>;
+            enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/orisetech,otm8009a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
+
+maintainers:
+  - Philippe CORNU <philippe.cornu@foss.st.com>
+
+description: |
+             The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
+             a MIPI-DSI video interface. Its backlight is managed through the DSI link.
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    const: orisetech,otm8009a
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  enable-gpios: true
+  port: true
+  power-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "orisetech,otm8009a";
+        reg = <0>;
+        reset-gpios = <&gpiof 15 0>;
+        power-supply = <&v1v8>;
+      };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/panel-common-dual.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-common-dual.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Dual-Link Display Panels
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  Properties common for Panel IC supporting dual link panels.  Devices might
+  support also single link.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: First link
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Second link
+
+      "#address-cells": true
+      "#size-cells": true
+
+    required:
+      - port@0
+
+# Single-panel setups are still allowed.
+oneOf:
+  - required:
+      - ports
+  - required:
+      - port
+
+additionalProperties: true

linux-7.2.3/Documentation/devicetree/bindings/display/panel/panel-common.yaml

@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Display Panels
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  This document defines device tree properties common to several classes of
+  display panels. It doesn't constitute a device tree binding specification by
+  itself but is meant to be referenced by device tree bindings.
+
+  When referenced from panel device tree bindings the properties defined in this
+  document are defined as follows. The panel device tree bindings are
+  responsible for defining whether each property is required or optional.
+
+properties:
+  # Descriptive Properties
+  width-mm:
+    description:
+      Specifies the width of the physical area where images are displayed. This
+      property is expressed in millimeters and rounded to the closest unit.
+
+  height-mm:
+    description:
+      Specifies the height of the physical area where images are displayed. This
+      property is expressed in millimeters and rounded to the closest unit.
+
+  label:
+    description: |
+      The label property specifies a symbolic name for the panel as a
+      string suitable for use by humans. It typically contains a name inscribed
+      on the system (e.g. as an affixed label) or specified in the system's
+      documentation (e.g. in the user's manual).
+
+      If no such name exists, and unless the property is mandatory according to
+      device tree bindings, it shall rather be omitted than constructed of
+      non-descriptive information. For instance an LCD panel in a system that
+      contains a single panel shall not be labelled "LCD" if that name is not
+      inscribed on the system or used in a descriptive fashion in system
+      documentation.
+
+  rotation:
+    description:
+      Display rotation in degrees counter clockwise (0,90,180,270)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 90, 180, 270]
+
+  flip-horizontal:
+    description: boolean to flip image horizontally
+    type: boolean
+
+  flip-vertical:
+    description: boolean to flip image vertically
+    type: boolean
+
+  # Display Timings
+  panel-timing:
+    description:
+      Most display panels are restricted to a single resolution and
+      require specific display timings. The panel-timing subnode expresses those
+      timings.
+    $ref: panel-timing.yaml#
+
+  display-timings:
+    description:
+      Some display panels support several resolutions with different timings.
+      The display-timings bindings supports specifying several timings and
+      optionally specifying which is the native mode.
+    $ref: display-timings.yaml#
+
+  # Connectivity
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+  ddc-i2c-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some panels expose EDID information through an I2C-compatible
+      bus such as DDC2 or E-DDC. For such panels the ddc-i2c-bus contains a
+      phandle to the system I2C controller connected to that bus.
+
+  no-hpd:
+    type: boolean
+    description:
+      This panel is supposed to communicate that it's ready via HPD
+      (hot plug detect) signal, but the signal isn't hooked up so we should
+      hardcode the max delay from the panel spec when powering up the panel.
+
+  hpd-gpios:
+    maxItems: 1
+    description:
+      If Hot Plug Detect (HPD) is connected to a GPIO in the system rather
+      than a dedicated HPD pin the pin can be specified here.
+
+  # Control I/Os
+
+  # Many display panels can be controlled through pins driven by GPIOs. The nature
+  # and timing of those control signals are device-specific and left for panel
+  # device tree bindings to specify. The following GPIO specifiers can however be
+  # used for panels that implement compatible control signals.
+
+  enable-gpios:
+    maxItems: 1
+    description: |
+      Specifier for a GPIO connected to the panel enable control signal. The
+      enable signal is active high and enables operation of the panel. This
+      property can also be used for panels implementing an active low power down
+      signal, which is a negated version of the enable signal. Active low enable
+      signals (or active high power down signals) can be supported by inverting
+      the GPIO specifier polarity flag.
+
+      Note that the enable signal control panel operation only and must not be
+      confused with a backlight enable signal.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Specifier for a GPIO connected to the panel reset control signal.
+      The reset signal is active low and resets the panel internal logic
+      while active. Active high reset signals can be supported by inverting the
+      GPIO specifier polarity flag.
+
+  te-gpios:
+    maxItems: 1
+    description:
+      GPIO spec for the tearing effect synchronization signal.
+      The tearing effect signal is active high. Active low signals can be
+      supported by inverting the GPIO specifier polarity flag.
+
+  # Power
+  power-supply:
+    description:
+      Display panels require power to be supplied. While several panels need
+      more than one power supply with panel-specific constraints governing the
+      order and timings of the power supplies, in many cases a single power
+      supply is sufficient, either because the panel has a single power rail, or
+      because all its power rails can be driven by the same supply. In that case
+      the power-supply property specifies the supply powering the panel as a
+      phandle to a regulator.
+
+  # Backlight
+
+  # Most display panels include a backlight. Some of them also include a backlight
+  # controller exposed through a control bus such as I2C or DSI. Others expose
+  # backlight control through GPIO, PWM or other signals connected to an external
+  # backlight controller.
+
+  backlight:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      For panels whose backlight is controlled by an external backlight
+      controller, this property contains a phandle that references the
+      controller.
+
+dependencies:
+  width-mm: [ height-mm ]
+  height-mm: [ width-mm ]
+
+additionalProperties: true
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml

@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic MIPI DPI Panel
+
+maintainers:
+  - Sam Ravnborg <sam@ravnborg.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    description:
+      Shall contain a panel specific compatible and "panel-dpi"
+      in that order.
+    items:
+      - {}
+      - const: panel-dpi
+
+  backlight: true
+  enable-gpios: true
+  height-mm: true
+  label: true
+  panel-timing: true
+  port: true
+  power-supply: true
+  reset-gpios: true
+  width-mm: true
+
+required:
+  - panel-timing
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    panel {
+        compatible = "startek,startek-kd050c", "panel-dpi";
+        label = "osddisplay";
+        power-supply = <&vcc_supply>;
+        backlight = <&backlight>;
+
+        port {
+            lcd_in: endpoint {
+                remote-endpoint = <&dpi_out>;
+            };
+        };
+        panel-timing {
+            clock-frequency = <9200000>;
+            hactive = <800>;
+            vactive = <480>;
+            hfront-porch = <8>;
+            hback-porch = <4>;
+            hsync-len = <41>;
+            vback-porch = <2>;
+            vfront-porch = <4>;
+            vsync-len = <10>;
+
+            hsync-active = <0>;
+            vsync-active = <0>;
+            de-active = <1>;
+            pixelclk-active = <1>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml

@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DSI command mode panels
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  This binding file is a collection of the DSI panels that
+  are usually driven in command mode. If no backlight is
+  referenced via the optional backlight property, the DSI
+  panel is assumed to have native backlight support.
+  The panel may use an OF graph binding for the association
+  to the display, or it may be a direct child node of the
+  display.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    items:
+      - enum:
+          - motorola,droid4-panel        # Panel from Motorola Droid4 phone
+          - nokia,himalaya               # Panel from Nokia N950 phone
+          - tpo,taal                     # Panel from OMAP4 SDP board
+      - const: panel-dsi-cm              # Generic DSI command mode panel compatible fallback
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddi-supply:
+    description:
+      Display panels require power to be supplied. While several panels need
+      more than one power supply with panel-specific constraints governing the
+      order and timings of the power supplies, in many cases a single power
+      supply is sufficient, either because the panel has a single power rail, or
+      because all its power rails can be driven by the same supply. In that case
+      the vddi-supply property specifies the supply powering the panel as a
+      phandle to a regulator.
+
+  vpnl-supply:
+    description:
+      When the display panel needs a second power supply, this property can be
+      used in addition to vddi-supply. Both supplies will be enabled at the
+      same time before the panel is being accessed.
+
+  width-mm: true
+  height-mm: true
+  label: true
+  rotation: true
+  panel-timing: true
+  port: true
+  reset-gpios: true
+  te-gpios: true
+  backlight: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi-controller {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "tpo,taal", "panel-dsi-cm";
+            reg = <0>;
+            reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/panel-edp-legacy.yaml

@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-edp-legacy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Legacy eDP panels from before the "edp-panel" compatible
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description: |
+  This binding file is a collection of eDP panels from before the generic
+  "edp-panel" compatible was introduced. It is kept around to support old
+  dts files. The only reason one might add a new panel here instead of using
+  the generic "edp-panel" is if it needed to be used on an eDP controller
+  that doesn't support the generic "edp-panel" compatible, but it should be
+  a strong preference to add the generic "edp-panel" compatible instead.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+    # compatible must be listed in alphabetical order, ordered by compatible.
+    # The description in the comment is mandatory for each compatible.
+
+        # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+      - auo,b101ean01
+        # AUO B116XAK01 eDP TFT LCD panel
+      - auo,b116xa01
+        # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+      - auo,b133htn01
+        # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
+      - auo,b133xtn01
+        # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
+      - boe,nv101wxmn51
+        # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel
+      - boe,nv110wtm-n61
+        # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel
+      - boe,nv133fhm-n61
+        # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel
+      - boe,nv133fhm-n62
+        # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
+      - boe,nv140fhmn49
+        # FriendlyELEC HD702E 800x1280 LCD panel
+      - friendlyarm,hd702e
+        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+      - innolux,n116bca-ea1
+        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+      - innolux,n116bge
+        # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel
+      - innolux,n125hce-gn1
+        # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
+      - innolux,p120zdg-bf1
+        # King & Display KD116N21-30NV-A010 eDP TFT LCD panel
+      - kingdisplay,kd116n21-30nv-a010
+        # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
+      - lg,lp079qx1-sp0v
+        # LG 9.7" (2048x1536 pixels) TFT LCD panel
+      - lg,lp097qx1-spa1
+        # LG 12.0" (1920x1280 pixels) TFT LCD panel
+      - lg,lp120up1
+        # LG 12.9" (2560x1700 pixels) TFT LCD panel
+      - lg,lp129qe
+        # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel
+      - neweast,wjfh116008a
+        # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
+      - samsung,lsn122dl01-c01
+        # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
+      - samsung,ltn140at29-301
+        # Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
+      - sharp,ld-d5116z01b
+        # Sharp 12.3" (2400x1600 pixels) TFT LCD panel
+      - sharp,lq123p1jx31
+
+  backlight: true
+  ddc-i2c-bus: true
+  enable-gpios: true
+  panel-timing: true
+  port: true
+  power-supply: true
+  no-hpd: true
+  hpd-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+examples:
+  - |
+    panel: panel {
+      compatible = "innolux,n116bge";
+      power-supply = <&panel_regulator>;
+      backlight = <&backlight>;
+
+      panel-timing {
+        clock-frequency = <74250000>;
+        hactive = <1366>;
+        hfront-porch = <136>;
+        hback-porch = <60>;
+        hsync-len = <30>;
+        hsync-active = <0>;
+        vactive = <768>;
+        vfront-porch = <8>;
+        vback-porch = <12>;
+        vsync-len = <12>;
+        vsync-active = <0>;
+      };
+
+      port {
+        panel_in_edp: endpoint {
+          remote-endpoint = <&edp_out_panel>;
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/panel-edp.yaml

@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-edp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Probeable (via DP AUX / EDID) eDP Panels with simple poweron sequences
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description: |
+  This binding file can be used to indicate that an eDP panel is connected
+  to a Embedded DisplayPort AUX bus (see display/dp-aux-bus.yaml) without
+  actually specifying exactly what panel is connected. This is useful for
+  the case that more than one different panel could be connected to the
+  board, either for second-sourcing purposes or to support multiple SKUs
+  with different LCDs that hook up to a common board.
+
+  As per above, a requirement for using this binding is that the panel is
+  represented under the DP AUX bus. This means that we can use any
+  information provided by the DP AUX bus (including the EDID) to identify
+  the panel. We can use this to identify display size, resolution, and
+  timings among other things.
+
+  One piece of information about eDP panels that is typically _not_
+  provided anywhere on the DP AUX bus is the power sequencing timings.
+  This is the reason why, historically, we've always had to explicitly
+  list eDP panels. We solve that here with two tricks. The "worst case"
+  power on timings for any panels expected to be connected to a board are
+  specified in these bindings. Once we've powered on, it's expected that
+  the operating system will lookup the panel in a table (based on EDID
+  information) to figure out other power sequencing timings.
+
+  eDP panels in general can have somewhat arbitrary power sequencing
+  requirements. However, even though it's arbitrary in general, the
+  vast majority of panel datasheets have a power sequence diagram that
+  looks the exactly the same as every other panel. Each panel datasheet
+  cares about different timings in this diagram but the fact that the
+  diagram is so similar means we can come up with a single driver to
+  handle it.
+
+  These diagrams all look roughly like this, sometimes labeled with
+  slightly different numbers / lines but all pretty much the same
+  sequence. This is because much of this diagram comes straight from
+  the eDP Standard.
+
+                __________________________________________________
+  Vdd       ___/:                                                :\____       /
+          _/    :                                                :     \_____/
+           :<T1>:<T2>:                                 :<--T10-->:<T11>:<T12>:
+                :    +-----------------------+---------+---------+
+  eDP     -----------+ Black video           | Src vid | Blk vid +
+  Display       :    +-----------------------+---------+---------+
+                :     _______________________:_________:_________:
+  HPD           :<T3>|                       :         :         |
+          ___________|                       :         :         |_____________
+                     :                       :         :         :
+  Sink               +-----------------------:---------:---------+
+  AUX CH  -----------+ AUX Ch operational    :         :         +-------------
+                     +-----------------------:---------:---------+
+                     :                       :         :         :
+                     :<T4>:             :<T7>:         :         :
+  Src main                +------+------+--------------+---------+
+  lnk data----------------+LnkTrn| Idle |Valid vid data| Idle/off+-------------
+                          +------+------+--------------+---------+
+                          : <T5> :<-T6->:<-T8->:       :
+                                               :__:<T9>:
+  LED_EN                                       |  |
+          _____________________________________|  |____________________________
+                                               :  :
+                                     __________:__:_
+  PWM                               |          :  : |
+          __________________________|          :  : |__________________________
+                                    :          :  : :
+                       _____________:__________:__:_:______
+  Bklight         ____/:            :          :  : :     :\____
+  power   _______/     :<---T13---->:          :  : :<T16>:     \______________
+  (Vbl)          :<T17>:<---------T14--------->:  :<-T15->:<T18>:
+
+  The above looks fairly complex but, as per above, each panel only cares
+  about a subset of those timings.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: edp-panel
+
+  hpd-reliable-delay-ms:
+    description:
+      A fixed amount of time that must be waited after powering on the
+      panel's power-supply before the HPD signal is a reliable way to know
+      when the AUX channel is ready. This is useful for panels that glitch
+      the HPD at the start of power-on. This value is not needed if HPD is
+      always reliable for all panels that might be connected.
+
+  hpd-absent-delay-ms:
+    description:
+      The panel specifies that HPD will be asserted this many milliseconds
+      from power on (timing T3 in the diagram above). If we have no way to
+      measure HPD then a fixed delay of this many milliseconds can be used.
+      This can also be used as a timeout when waiting for HPD. Does not
+      include the hpd-reliable-delay, so if hpd-reliable-delay was 80 ms
+      and hpd-absent-delay was 200 ms then we'd do a fixed 80 ms delay and
+      then we know HPD would assert in the next 120 ms. This value is not
+      needed if HPD hooked up, either through a GPIO in the panel node or
+      hooked up directly to the eDP controller.
+
+  backlight: true
+  enable-gpios: true
+  port: true
+  power-supply: true
+  no-hpd: true
+  hpd-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+        enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+        vpll-supply = <&src_pp1800_s4a>;
+        vccio-supply = <&src_pp1800_s4a>;
+        vcca-supply = <&src_pp1200_l2a>;
+        vcc-supply = <&src_pp1200_l2a>;
+
+        clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+        clock-names = "refclk";
+
+        no-hpd;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            sn65dsi86_out: endpoint {
+              remote-endpoint = <&panel_in_edp>;
+            };
+          };
+        };
+
+        aux-bus {
+          panel {
+            compatible = "edp-panel";
+            power-supply = <&pp3300_dx_edp>;
+            backlight = <&backlight>;
+            hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+            hpd-reliable-delay-ms = <15>;
+
+            port {
+              panel_in_edp: endpoint {
+                remote-endpoint = <&sn65dsi86_out>;
+              };
+            };
+          };
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml

@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic LVDS Display Panel
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: panel-lvds
+
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - advantech,idk-1110wr
+            - advantech,idk-2121wr
+            - innolux,ee101ia-01d
+            - mitsubishi,aa104xd12
+            - mitsubishi,aa121td01
+            - sgd,gktw70sdae4se
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # Admatec 9904379 10.1" 1024x600 LVDS panel
+          - admatec,9904379
+          # Ampire AMP19201200B5TZQW-T03 10.1" WUXGA (1920x1200) color TFT LCD panel
+          - ampire,amp19201200b5tzqw-t03
+          - auo,b101ew05
+          # AUO G084SN05 V9 8.4" 800x600 LVDS panel
+          - auo,g084sn05
+          # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel
+          - chunghwa,claa070wp03xg
+          # EDT ETML0700Z8DHA 7.0" Full HD (1920x1080) color TFT LCD LVDS panel
+          - edt,etml0700z8dha
+          # EDT ETML0700Z9NDHA 7.0" WSVGA (1024x600) color TFT LCD LVDS panel
+          - edt,etml0700z9ndha
+          # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel
+          - hannstar,hsd101pww2
+          # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel
+          - hydis,hv070wx2-1e0
+          # Jenson Display BL-JT60050-01A 7" WSVGA (1024x600) color TFT LCD LVDS panel
+          - jenson,bl-jt60050-01a
+          # Riverdi RVT101HVLNWC00 10.1" WXGA (1280x800) TFT LCD LVDS panel
+          - riverdi,rvt101hvlnwc00
+          # Riverdi RVT70HSLNWCA0 7.0" WSVGA (1024x600) TFT LCD LVDS panel
+          - riverdi,rvt70hslnwca0
+          # Samsung LTN070NL01 7.0" WSVGA (1024x600) TFT LCD LVDS panel
+          - samsung,ltn070nl01
+          # Samsung LTN101AL03 10.1" WXGA (800x1280) TFT LCD LVDS panel
+          - samsung,ltn101al03
+          - tbs,a711-panel
+          # Winstar WF70A8SYJHLNGA 7" WSVGA (1024x600) color TFT LCD LVDS panel
+          - winstar,wf70a8syjhlnga
+
+      - const: panel-lvds
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml

@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DBI SPI Panel
+
+maintainers:
+  - Noralf Trønnes <noralf@tronnes.org>
+
+description: |
+  This binding is for display panels using a MIPI DBI compatible controller
+  in SPI mode.
+
+  The MIPI Alliance Standard for Display Bus Interface defines the electrical
+  and logical interfaces for display controllers historically used in mobile
+  phones. The standard defines 4 display architecture types and this binding is
+  for type 1 which has full frame memory. There are 3 interface types in the
+  standard and type C is the serial interface.
+
+  The standard defines the following interface signals for type C:
+  - Power:
+    - Vdd: Power supply for display module
+      Called power-supply in this binding.
+    - Vddi: Logic level supply for interface signals
+      Called io-supply in this binding.
+  - Interface:
+    - CSx: Chip select
+    - SCL: Serial clock
+    - Dout: Serial out
+    - Din: Serial in
+    - SDA: Bidrectional in/out
+    - D/CX: Data/command selection, high=data, low=command
+      Called dc-gpios in this binding.
+    - RESX: Reset when low
+      Called reset-gpios in this binding.
+
+  The type C interface has 3 options:
+
+    - Option 1: 9-bit mode and D/CX as the 9th bit
+      |              Command              |  the next command or following data  |
+      |<0><D7><D6><D5><D4><D3><D2><D1><D0>|<D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+    - Option 2: 16-bit mode and D/CX as a 9th bit
+      |              Command or data                              |
+      |<X><X><X><X><X><X><X><D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+    - Option 3: 8-bit mode and D/CX as a separate interface line
+      |        Command or data         |
+      |<D7><D6><D5><D4><D3><D2><D1><D0>|
+
+  The standard defines one pixel format for type C: RGB111. The industry
+  however has decided to provide the type A/B interface pixel formats also on
+  the Type C interface and most common among these are RGB565 and RGB666.
+  The MIPI DCS command set_address_mode (36h) has one bit that controls RGB/BGR
+  order. This gives each supported RGB format a BGR variant.
+
+  The panel resolution is specified using the panel-timing node properties
+  hactive (width) and vactive (height). The other mandatory panel-timing
+  properties should be set to zero except clock-frequency which can be
+  optionally set to inform about the actual pixel clock frequency.
+
+  If the panel is wired to the controller at an offset specify this using
+  hback-porch (x-offset) and vback-porch (y-offset).
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - saef,sftc154b
+          - sainsmart18
+          - shineworld,lh133k
+      - const: panel-mipi-dbi-spi
+
+  reg:
+    maxItems: 1
+
+  write-only:
+    type: boolean
+    description:
+      Controller is not readable (ie. Din (MISO on the SPI interface) is not
+      wired up).
+
+  dc-gpios:
+    maxItems: 1
+    description: |
+      Controller data/command selection (D/CX) in 4-line SPI mode.
+      If not set, the controller is in 3-line SPI mode.
+
+  io-supply:
+    description: |
+      Logic level supply for interface signals (Vddi).
+      No need to set if this is the same as power-supply.
+
+  spi-3wire: true
+
+  format:
+    description: >
+      Pixel format in bit order as going on the wire:
+        * `x2r1g1b1r1g1b1` - RGB111, 2 pixels per byte
+        * `x2b1g1r1b1g1r1` - BGR111, 2 pixels per byte
+        * `x1r1g1b1x1r1g1b1` - RGB111, 2 pixels per byte
+        * `x1b1g1r1x1b1g1r1` - BGR111, 2 pixels per byte
+        * `r5g6b5` - RGB565, 2 bytes
+        * `b5g6r5` - BGR565, 2 bytes
+        * `r6x2g6x2b6x2` - RGB666, 3 bytes
+        * `b6x2g6x2r6x2` - BGR666, 3 bytes
+    enum:
+      - x2r1g1b1r1g1b1
+      - x2b1g1r1b1g1r1
+      - x1r1g1b1x1r1g1b1
+      - x1b1g1r1x1b1g1r1
+      - r5g6b5
+      - b5g6r5
+      - r6x2g6x2b6x2
+      - b6x2g6x2r6x2
+    default: r5g6b5
+
+required:
+  - compatible
+  - reg
+  - width-mm
+  - height-mm
+  - panel-timing
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0{
+            compatible = "sainsmart18", "panel-mipi-dbi-spi";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+
+            dc-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+            write-only;
+
+            format = "r5g6b5";
+
+            backlight = <&backlight>;
+
+            width-mm = <35>;
+            height-mm = <28>;
+
+            panel-timing {
+                hactive = <160>;
+                vactive = <128>;
+                hback-porch = <0>;
+                vback-porch = <0>;
+                clock-frequency = <0>;
+                hfront-porch = <0>;
+                hsync-len = <0>;
+                vfront-porch = <0>;
+                vsync-len = <0>;
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml

@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple DSI panels with a single power-supply
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  This binding file is a collection of the DSI panels that
+  requires only a single power-supply.
+  There are optionally a backlight and an enable GPIO.
+  The panel may use an OF graph binding for the association to the display,
+  or it may be a direct child node of the display.
+
+  If the panel is more advanced a dedicated binding file is required.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    enum:
+      # compatible must be listed in alphabetical order, ordered by compatible.
+      # The description in the comment is mandatory for each compatible.
+
+        # AU Optronics Corporation 8.0" WUXGA TFT LCD panel
+      - auo,b080uan01
+        # Boe Corporation 8.0" WUXGA TFT LCD panel
+      - boe,tv080wum-nl0
+        # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
+      - innolux,p079zca
+        # JDI FHD_R63452 1080x1920 5.2" IPS LCD Panel
+      - jdi,fhd-r63452
+        # Khadas TS050 5" 1080x1920 LCD panel
+      - khadas,ts050
+        # Khadas TS050 V2 5" 1080x1920 LCD panel
+      - khadas,ts050v2
+        # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
+      - kingdisplay,kd097d04
+        # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
+      - lg,acx467akm-7
+        # LG Corporation 5" HD TFT LCD panel
+      - lg,lh500wx1-sd03
+        # Lincoln LCD197 5" 1080x1920 LCD panel
+      - lincolntech,lcd197
+        # Novatek NT37700F 1080x2160 AMOLED panel
+      - novatek,nt37700f
+        # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel
+      - osddisplays,osd101t2587-53ts
+        # Panasonic 10" WUXGA TFT LCD panel
+      - panasonic,vvx10f004b00
+        # Panasonic 10" WUXGA TFT LCD panel
+      - panasonic,vvx10f034n00
+        # Samsung ltl106hl02 10.6" Full HD TFT LCD panel
+      - samsung,ltl106hl02-001
+        # Samsung s6e3fa7 1080x2220 based AMS559NK06 AMOLED panel
+      - samsung,s6e3fa7-ams559nk06
+        # Shangai Top Display Optoelectronics 7" TL070WSH30 1024x600 TFT LCD panel
+      - tdo,tl070wsh30
+        # Team Source Display Technology 7" TST070WSBE-196C 1024x600 TFT LCD panel
+      - team-source-display,tst070wsbe-196c
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  backlight: true
+  enable-gpios: true
+  reset-gpios: true
+  port: true
+  power-supply: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+  - reg
+
+examples:
+  - |
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "panasonic,vvx10f034n00";
+        reg = <0>;
+        power-supply = <&vcc_lcd_reg>;
+
+        port {
+          panel: endpoint {
+            remote-endpoint = <&ltdc_out>;
+          };
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml

@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple-lvds-dual-ports.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple LVDS panels with one power supply and dual LVDS ports
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  This binding file is a collection of the LVDS panels that
+  has dual LVDS ports and requires only a single power-supply.
+  The first port receives odd pixels, and the second port receives even pixels.
+  There are optionally a backlight and an enable GPIO.
+  The panel may use an OF graph binding for the association to the display,
+  or it may be a direct child node of the display.
+
+  If the panel is more advanced a dedicated binding file is required.
+
+allOf:
+  - $ref: /schemas/display/lvds-dual-ports.yaml#
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    enum:
+    # compatible must be listed in alphabetical order, ordered by compatible.
+    # The description in the comment is mandatory for each compatible.
+
+        # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
+      - auo,g133han01
+        # AU Optronics Corporation 15.6" FHD (1920x1080) TFT LCD panel
+      - auo,g156han04
+        # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
+      - auo,g185han01
+        # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel
+      - auo,g190ean01
+        # AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
+      - auo,t215hvn01
+        # BOE AV123Z7M-N17 12.3" (1920x720) LVDS TFT LCD panel
+      - boe,av123z7m-n17
+        # InnoLux 15.6" FHD (1920x1080) TFT LCD panel
+      - innolux,g156hce-l01
+        # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel
+      - koe,tx26d202vm0bwa
+        # Lincoln Technology Solutions, LCD185-101CT 10.1" TFT 1920x1200
+      - lincolntech,lcd185-101ct
+        # Microtips Technology MF-101HIEBCAF0 10.1" WUXGA (1920x1200) TFT LCD panel
+      - microtips,mf-101hiebcaf0
+        # Microtips Technology MF-103HIEB0GA0 10.25" 1920x720 TFT LCD panel
+      - microtips,mf-103hieb0ga0
+        # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel
+      - nlt,nl192108ac18-02d
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        required:
+          - dual-lvds-odd-pixels
+
+      port@1:
+        required:
+          - dual-lvds-even-pixels
+
+    required:
+      - port@0
+      - port@1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+examples:
+  - |
+    panel: panel-lvds {
+      compatible = "koe,tx26d202vm0bwa";
+      power-supply = <&vdd_lcd_reg>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          dual-lvds-odd-pixels;
+          reg = <0>;
+
+          panel_lvds0_in: endpoint {
+            remote-endpoint = <&lvds0_out>;
+          };
+        };
+
+        port@1 {
+          dual-lvds-even-pixels;
+          reg = <1>;
+
+          panel_lvds1_in: endpoint {
+            remote-endpoint = <&lvds1_out>;
+          };
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/panel-simple.yaml

@@ -0,0 +1,431 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple panels with one power supply
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  This binding file is a collection of the simple (dumb) panels that
+  requires only a single power-supply.
+  There are optionally a backlight and an enable GPIO.
+  The panel may use an OF graph binding for the association to the display,
+  or it may be a direct child node of the display.
+
+  If the panel is more advanced a dedicated binding file is required.
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: ../lvds-data-mapping.yaml#
+
+properties:
+  compatible:
+    enum:
+    # compatible must be listed in alphabetical order, ordered by compatible.
+    # The description in the comment is mandatory for each compatible.
+
+        # Ampire AM-1280800N3TZQW-T00H 10.1" WQVGA TFT LCD panel
+      - ampire,am-1280800n3tzqw-t00h
+        # Ampire AM-1280800W8TZQW-T00H 10.1" WXGA TFT LCD panel
+      - ampire,am-1280800w8tzqw-t00h
+        # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
+      - ampire,am-480272h3tmqw-t01h
+        # Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD panel
+      - ampire,am-800480l1tmqw-t00h
+        # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
+      - ampire,am800480r3tmqwa1h
+        # Ampire AM-800600P5TMQW-TB8H 8.0" SVGA TFT LCD panel
+      - ampire,am800600p5tmqw-tb8h
+        # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+      - auo,b101aw03
+        # AU Optronics Corporation 10.1" WXGA TFT LCD panel
+      - auo,b101xtn01
+        # AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
+      - auo,b116xw03
+        # AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
+      - auo,g070vvn01
+        # AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
+      - auo,g101evn010
+        # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
+      - auo,g104sn02
+        # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
+      - auo,g104stn01
+        # AU Optronics Corporation 12.1" (1280x800) TFT LCD panel
+      - auo,g121ean01
+        # AU Optronics Corporation 15.6" (1366x768) TFT LCD panel
+      - auo,g156xtn01
+        # AU Optronics Corporation 23.8" FHD (1920x1080) TFT LCD panel
+      - auo,p238han01
+        # AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel
+      - auo,p320hvn03
+        # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
+      - avic,tm070ddh03
+        # BOE AV101HDT-a10 10.1" 1280x720 LVDS panel
+      - boe,av101hdt-a10
+        # BOE BP082WX1-100 8.2" WXGA (1280x800) LVDS panel
+      - boe,bp082wx1-100
+        # BOE BP101WX1-100 10.1" WXGA (1280x800) LVDS panel
+      - boe,bp101wx1-100
+        # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel
+      - boe,ev121wxm-n10-1850
+        # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
+      - boe,hv070wsa-100
+        # Crystal Clear Technology CMT430B19N00 4.3" 480x272 TFT-LCD panel
+      - cct,cmt430b19n00
+        # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel
+      - cdtech,s043wq26h-ct7
+        # CDTech(H.K.) Electronics Limited 7" WSVGA (1024x600) TFT LCD Panel
+      - cdtech,s070pws19hp-fc21
+        # CDTech(H.K.) Electronics Limited 7" WVGA (800x480) TFT LCD Panel
+      - cdtech,s070swv29hg-dc44
+        # CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel
+      - cdtech,s070wv95-ct16
+        # Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel
+      - chefree,ch101olhlwh-002
+        # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+      - chunghwa,claa101wa01a
+        # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+      - chunghwa,claa101wb01
+        # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+      - chunghwa,claa101wb03
+        # DataImage, Inc. 4.3" WQVGA (480x272) TFT LCD panel with 24-bit parallel interface.
+      - dataimage,fg040346dsswbg04
+        # DataImage, Inc. 10.1" WXGA (1280×800) TFT LCD panel
+      - dataimage,fg1001l0dsswmg01
+        # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface.
+      - dataimage,scf0700c48ggu18
+        # Displaytech DT050BTFT-PTS 5.0" 800x480 TFT LCD Panel
+      - displaytech,dt050btft-pts
+        # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel
+      - dlc,dlc1010gig
+        # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel
+      - edt,et035012dm6
+        # Emerging Display Technology Corp. 5.7" 24-bit VGA TFT LCD panel
+      - edt,et057023udba
+        # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
+      - edt,et057090dhu
+      - edt,et070080dh6
+        # Emerging Display Technology Corp. 3.5" WVGA TFT LCD panel with
+        # capacitive multitouch
+      - edt,etm0350g0dh6
+        # Emerging Display Technology Corp. 480x272 TFT Display with capacitive touch
+      - edt,etm043080dh6gp
+        # Emerging Display Technology Corp. 480x272 TFT Display
+      - edt,etm0430g0dh6
+        # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+        # Same as ETM0700G0DH6 but with inverted pixel clock.
+      - edt,etm070080bdh6
+        # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+        # Same timings as the ETM0700G0DH6, but with resistive touch.
+      - edt,etm070080dh6
+        # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+        # Same display as the ETM0700G0BDH6, but with changed hardware for the
+        # backlight and the touch interface.
+      - edt,etm070080edh6
+      - edt,etm0700g0bdh6
+        # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+      - edt,etm0700g0dh6
+      - edt,etm0700g0edh6
+        # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch
+      - edt,etml0700y5dha
+        # Emerging Display Technology Corp. 10.1" LVDS WXGA TFT Display with capacitive touch
+      - edt,etml1010g3dra
+        # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
+        # capacitive touch
+      - edt,etmv570g2dhu
+        # E Ink VB3300-KCA
+      - eink,vb3300-kca
+        # Evervision Electronics Co. Ltd. VGG644804 5.7" VGA TFT LCD Panel
+      - evervision,vgg644804
+        # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel
+      - evervision,vgg804821
+        # Foxlink Group 5" WVGA TFT LCD panel
+      - foxlink,fl500wvr00-a0t
+        # Frida FRD350H54004 3.5" QVGA TFT LCD panel
+      - frida,frd350h54004
+        # GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel
+      - giantplus,gpg48273qs5
+        # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel
+      - giantplus,gpm940b0
+        # HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
+      - hannstar,hsd070pww1
+        # HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel
+      - hannstar,hsd100pxn1
+        # HannStar Display Corp. HSD156JUW2 15.6" FHD (1920x1080) TFT LCD panel
+      - hannstar,hsd156juw2
+        # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
+      - hit,tx23d38vm0caa
+        # Innolux AT043TN24 4.3" WQVGA TFT LCD panel
+      - innolux,at043tn24
+        # Innolux AT070TN92 7.0" WQVGA TFT LCD panel
+      - innolux,at070tn92
+        # Innolux G070ACE-L01 7" WVGA (800x480) TFT LCD panel
+      - innolux,g070ace-l01
+        # Innolux G070ACE-LH3 7" WVGA (800x480) TFT LCD panel with WLED backlight
+      - innolux,g070ace-lh3
+        # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel
+      - innolux,g070y2-l01
+        # Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel
+      - innolux,g070y2-t02
+        # Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel
+      - innolux,g101ice-l01
+        # Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
+      - innolux,g121i1-l01
+        # Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
+      - innolux,g121x1-l03
+        # Innolux Corporation 12.1" G121XCE-L01 XGA (1024x768) TFT LCD panel
+      - innolux,g121xce-l01
+        # InnoLux 15.0" G150XGE-L05 XGA (1024x768) TFT LCD panel
+      - innolux,g150xge-l05
+        # InnoLux 13.3" FHD (1920x1080) TFT LCD panel
+      - innolux,n133hse-ea1
+        # InnoLux 15.6" WXGA TFT LCD panel
+      - innolux,n156bge-l21
+        # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
+      - innolux,zj070na-01p
+        # JuTouch Technology Co.. 7" JT070TM041 WSVGA (1024 x 600) LVDS panel
+      - jutouch,jt070tm041
+        # JuTouch Technology Co.. 10" JT101TM023 WXGA (1280 x 800) LVDS panel
+      - jutouch,jt101tm023
+        # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
+      - koe,tx14d24vm1bpa
+        # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
+      - koe,tx31d200vm0baa
+        # Kyocera Corporation 7" WVGA (800x480) transmissive color TFT
+      - kyo,tcg070wvlq
+        # Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel
+      - kyo,tcg121xglp
+        # LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel
+      - lemaker,bl035-rgb-002
+        # LG 7" (800x480 pixels) TFT LCD panel
+      - lg,lb070wv8
+        # LG 6.1" (1440x3120) IPS LCD panel
+      - lg,sw49410
+        # Logic Technologies LT161010-2NHC 7" WVGA TFT Cap Touch Module
+      - logictechno,lt161010-2nhc
+        # Logic Technologies LT161010-2NHR 7" WVGA TFT Resistive Touch Module
+      - logictechno,lt161010-2nhr
+        # Logic Technologies LT170410-2WHC 10.1" 1280x800 IPS TFT Cap Touch Mod.
+      - logictechno,lt170410-2whc
+        # Logic Technologies LTTD800x480 L2RT 7" 800x480 TFT Resistive Touch Module
+      - logictechno,lttd800480070-l2rt
+        # Logic Technologies LTTD800480070-L6WH-RT 7” 800x480 TFT Resistive Touch Module
+      - logictechno,lttd800480070-l6wh-rt
+        # Microchip AC69T88A 5" 800X480 LVDS interface TFT LCD Panel
+      - microchip,ac69t88a
+        # Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel
+      - mitsubishi,aa070mc01-ca1
+        # Mitsubishi AA084XE01 8.4" XGA TFT LCD panel
+      - mitsubishi,aa084xe01
+        # Multi-Inno Technology Co.,Ltd MI0700A2T-30 7" 800x480 TFT Resistive Touch Module
+      - multi-inno,mi0700a2t-30
+        # Multi-Inno Technology Co.,Ltd MI0700S4T-6 7" 800x480 TFT Resistive Touch Module
+      - multi-inno,mi0700s4t-6
+        # Multi-Inno Technology Co.,Ltd MI0800FT-9 8" 800x600 TFT Resistive Touch Module
+      - multi-inno,mi0800ft-9
+        # Multi-Inno Technology Co.,Ltd MI1010AIT-1CP 10.1" 1280x800 LVDS IPS Cap Touch Mod.
+      - multi-inno,mi1010ait-1cp
+        # Multi-Inno Technology Co.,Ltd MI1010Z1T-1CP11 10.1" 1024x600 TFT Resistive Touch Module
+      - multi-inno,mi1010z1t-1cp11
+        # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel
+      - nec,nl12880bc20-05
+        # NEC LCD Technologies,Ltd. WQVGA TFT LCD panel
+      - nec,nl4827hc19-05b
+        # NEC LCD Technologies,Ltd. VGA TFT LCD panel
+      - nec,nl6448bc33-70c
+        # Netron-DY E231732 7.0" WSVGA TFT LCD panel
+      - netron-dy,e231732
+        # Newhaven Display International 480 x 272 TFT LCD panel
+      - newhaven,nhd-4.3-480272ef-atxl
+        # NLT Technologies, Ltd. 12.1" WXGA (1280 x 800) LVDS TFT LCD panel
+      - nlt,nl12880bc20-spwg-24
+        # NLT Technologies, Ltd. 15.6" WXGA (1366×768) LVDS TFT LCD panel
+      - nlt,nl13676bc25-03f
+        # New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
+      - nvd,9128
+        # OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
+      - okaya,rs800480t-7x0gp
+        # Olimex 4.3" TFT LCD panel
+      - olimex,lcd-olinuxino-43-ts
+        # Olimex 5.0" TFT LCD panel
+      - olimex,lcd-olinuxino-5-cts
+        # On Tat Industrial Company 5" DPI TFT panel.
+      - ontat,kd50g21-40nt-a1
+        # On Tat Industrial Company 7" DPI TFT panel.
+      - ontat,yx700wv03
+        # OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel
+      - ortustech,com37h3m05dtc
+        # OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel
+      - ortustech,com37h3m99dtc
+        # OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel
+      - ortustech,com43h4m85ulc
+        # OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel
+      - osddisplays,osd070t1718-19ts
+        # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel
+      - osddisplays,osd101t2045-53ts
+        # POWERTIP PH128800T004-ZZA01 10.1" WXGA TFT LCD panel
+      - powertip,ph128800t004-zza01
+        # POWERTIP PH128800T006-ZHC01 10.1" WXGA TFT LCD panel
+      - powertip,ph128800t006-zhc01
+        # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel
+      - powertip,ph800480t013-idf02
+        # POWERTIP PH800480T032-ZHC19 7.0" WVGA TFT LCD panel
+      - powertip,ph800480t032-zhc19
+        # PrimeView PM070WL4 7.0" 800x480 TFT LCD panel
+      - primeview,pm070wl4
+        # QiaoDian XianShi Corporation 4"3 TFT LCD panel
+      - qiaodian,qd43003c0-40
+        # Shenzhen QiShenglong Industrialist Co., Ltd. Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel
+      - qishenglong,gopher2b-lcd
+        # Raystar Optronics, Inc. RFF500F-AWH-DNN 5.0" TFT 840x480
+      - raystar,rff500f-awh-dnn
+        # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800
+      - rocktech,rk101ii01d-ct
+        # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel
+      - rocktech,rk070er9427
+        # Rocktech Display Ltd. RK043FN48H 4.3" 480x272 LCD-TFT panel
+      - rocktech,rk043fn48h
+        # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel
+      - samsung,ltl101al01
+        # Samsung Electronics 10.6" FWXGA (1366x768) TFT LCD panel
+      - samsung,ltl106al01
+        # Samsung Electronics 10.1" WSVGA TFT LCD panel
+      - samsung,ltn101nt05
+        # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel
+      - satoz,sat050at40h12r2
+        # Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel
+      - sharp,lq035q7db03
+        # Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel
+      - sharp,lq070y3dg3b
+        # Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel
+      - sharp,lq101k1ly04
+        # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel
+      - sharp,ls020b1dd01d
+        # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
+      - shelly,sca07010-bfn-lnn
+        # Starry KR070PE2T 7" WVGA TFT LCD panel
+      - starry,kr070pe2t
+        # Startek KD070HDFLD092 7" WSVGA TFT LCD panel
+      - startek,kd070hdfld092
+        # Startek KD070WVFPA043-C069A 7" TFT LCD panel
+      - startek,kd070wvfpa
+        # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel
+      - team-source-display,tst043015cmhx
+        # Tianma Micro-electronics P0700WXF1MBAA 7.0" WXGA (1280x800) LVDS TFT LCD panel
+      - tianma,p0700wxf1mbaa
+        # Tianma Micro-electronics TM050RDH03 5.0" WVGA TFT LCD panel
+      - tianma,tm050rdh03
+        # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
+      - tianma,tm070jdhg30
+        # Tianma Micro-electronics TM070JDHG34-00 7.0" WXGA (1280x800) LVDS TFT LCD panel
+      - tianma,tm070jdhg34-00
+        # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel
+      - tianma,tm070jvhg33
+        # Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel
+      - tianma,tm070rvhg71
+        # Topland TIAN-G07017-01 7.0" WSVGA TFT-LCD panel with capacitive touch
+      - topland,tian-g07017-01
+        # Toshiba 8.9" WXGA (1280x768) TFT LCD panel
+      - toshiba,lt089ac29000
+        # TPK U.S.A. LLC Fusion 7" 800 x 480 (WVGA) LCD panel with capacitive touch
+      - tpk,f07a-0102
+        # TPK U.S.A. LLC Fusion 10.1" 1024 x 600 (WSVGA) LCD panel with capacitive touch
+      - tpk,f10a-0102
+        # United Radiant Technology UMSH-8596MD-xT 7.0" WVGA TFT LCD panel
+        # Supported are LVDS versions (-11T, -19T) and parallel ones
+        # (-T, -1T, -7T, -20T).
+      - urt,umsh-8596md-t
+      - urt,umsh-8596md-1t
+      - urt,umsh-8596md-7t
+      - urt,umsh-8596md-11t
+      - urt,umsh-8596md-19t
+      - urt,umsh-8596md-20t
+        # Vivax TPC-9150 tablet 9.0" WSVGA TFT LCD panel
+      - vivax,tpc9150-panel
+        # VXT 800x480 color TFT LCD panel
+      - vxt,vl050-8048nt-c01
+        # Waveshare 10.1" WXGA (1280x800) LCD panel
+      - waveshare,10.1inch-c-panel
+        # Waveshare 11.9" (320x1480) LCD panel
+      - waveshare,11.9inch-panel
+        # Waveshare 13.3" FHD (1920x1080) LCD panel
+      - waveshare,13.3inch-panel
+        # Waveshare 2.8" VGA (480x640) LCD panel
+      - waveshare,2.8inch-panel
+        # Waveshare 3.4" (800x800) LCD panel
+      - waveshare,3.4inch-c-panel
+        # Waveshare 4.0" WVGA (480x800) LCD panel
+      - waveshare,4.0inch-panel
+        # Waveshare 4.0" (720x720) LCD panel
+      - waveshare,4.0inch-c-panel
+        # Waveshare 5.0" WSVGA (1024x600) LCD panel
+      - waveshare,5.0inch-c-panel
+        # Waveshare 5.0" HD 720p (720x1280) LCD panel
+      - waveshare,5.0inch-d-panel
+        # Waveshare 6.25" (720x1560) LCD panel
+      - waveshare,6.25inch-panel
+        # Waveshare 7.0" WSVGA (1024x600) LCD panel
+      - waveshare,7.0inch-c-panel
+        # Waveshare 7.0" WXGA (1280x800) LCD panel
+      - waveshare,7.0inch-e-panel
+        # Waveshare 7.0" HD 720p (720x1280) LCD panel
+      - waveshare,7.0inch-h-panel
+        # Waveshare 7.9" (400x1280) LCD panel
+      - waveshare,7.9inch-panel
+        # Waveshare 8.0" WXGA (1280x800) LCD panel
+      - waveshare,8.0inch-c-panel
+        # Waveshare 8.8" (480x1920) LCD panel
+      - waveshare,8.8inch-panel
+        # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel
+      - winstar,wf35ltiacd
+        # Yes Optoelectronics YTC700TLAG-05-201C 7" TFT LCD panel
+      - yes-optoelectronics,ytc700tlag-05-201c
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - innolux,g101ice-l01
+            - yes-optoelectronics,ytc700tlag-05-201c
+then:
+  properties:
+    data-mapping: false
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+examples:
+  - |
+    panel_rgb: panel-rgb {
+      compatible = "ampire,am-480272h3tmqw-t01h";
+      power-supply = <&vcc_lcd_reg>;
+
+      port {
+        panel_in_rgb: endpoint {
+          remote-endpoint = <&ltdc_out_rgb>;
+        };
+      };
+    };
+  - |
+    panel_lvds: panel-lvds {
+      compatible = "innolux,g101ice-l01";
+      power-supply = <&vcc_lcd_reg>;
+
+      data-mapping = "jeida-24";
+
+      port {
+        panel_in_lvds: endpoint {
+          remote-endpoint = <&ltdc_out_lvds>;
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/panel/panel-timing.yaml

@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-timing.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: panel timing
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  There are different ways of describing the timing data of a panel. The
+  devicetree representation corresponds to the one commonly found in datasheets
+  for panels.
+
+  The parameters are defined as seen in the following illustration.
+
+  +-------+----------+-------------------------------------+----------+
+  |       |          |        ^                            |          |
+  |       |          |        |vsync_len                   |          |
+  |       |          |        v                            |          |
+  +-------+----------+-------------------------------------+----------+
+  |       |          |        ^                            |          |
+  |       |          |        |vback_porch                 |          |
+  |       |          |        v                            |          |
+  +-------+----------#######################################----------+
+  |       |          #        ^                            #          |
+  |       |          #        |                            #          |
+  | hsync |  hback   #        |                            #  hfront  |
+  |  len  |   porch  #        |       hactive              #  porch   |
+  |<----->|<-------->#<-------+--------------------------->#<-------->|
+  |       |          #        |                            #          |
+  |       |          #        |vactive                     #          |
+  |       |          #        |                            #          |
+  |       |          #        v                            #          |
+  +-------+----------#######################################----------+
+  |       |          |        ^                            |          |
+  |       |          |        |vfront_porch                |          |
+  |       |          |        v                            |          |
+  +-------+----------+-------------------------------------+----------+
+
+  The following is the panel timings shown with time on the x-axis.
+  This matches the timing diagrams often found in data sheets.
+
+              Active                 Front           Sync           Back
+              Region                 Porch                          Porch
+  <-----------------------><----------------><-------------><-------------->
+    //////////////////////|
+   ////////////////////// |
+  //////////////////////  |..................               ................
+                                             _______________
+
+  Timing can be specified either as a typical value or as a tuple
+  of min, typ, max values.
+
+properties:
+
+  clock-frequency:
+    description: Panel clock in Hz
+
+  hactive:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Horizontal panel resolution in pixels
+
+  vactive:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Vertical panel resolution in pixels
+
+  hfront-porch:
+    description: Horizontal front porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of pixels
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of pixels
+
+  hback-porch:
+    description: Horizontal back porch timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of pixels
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of pixels
+
+  hsync-len:
+    description: Horizontal sync length panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of pixels
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of pixels
+
+  vfront-porch:
+    description: Vertical front porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of lines
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of lines
+
+  vback-porch:
+    description: Vertical back porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of lines
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of lines
+
+  vsync-len:
+    description: Vertical sync length panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of lines
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of lines
+
+  hsync-active:
+    description: |
+      Horizontal sync pulse.
+      0 selects active low, 1 selects active high.
+      If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  vsync-active:
+    description: |
+      Vertical sync pulse.
+      0 selects active low, 1 selects active high.
+      If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  de-active:
+    description: |
+      Data enable.
+      0 selects active low, 1 selects active high.
+      If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  pixelclk-active:
+    description: |
+      Data driving on rising or falling edge.
+      Use 0 to drive pixel data on falling edge and
+      sample data on rising edge.
+      Use 1 to drive pixel data on rising edge and
+      sample data on falling edge
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  syncclk-active:
+    description: |
+      Drive sync on rising or sample sync on falling edge.
+      If not specified then the setup is as specified by pixelclk-active.
+      Use 0 to drive sync on falling edge and
+      sample sync on rising edge of pixel clock.
+      Use 1 to drive sync on rising edge and
+      sample sync on falling edge of pixel clock
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  interlaced:
+    type: boolean
+    description: Enable interlaced mode
+
+  doublescan:
+    type: boolean
+    description: Enable double scan mode
+
+  doubleclk:
+    type: boolean
+    description: Enable double clock mode
+
+required:
+  - clock-frequency
+  - hactive
+  - vactive
+  - hfront-porch
+  - hback-porch
+  - hsync-len
+  - vfront-porch
+  - vback-porch
+  - vsync-len
+
+additionalProperties: false
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.yaml

@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/pda,91-00156-a0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PDA 91-00156-A0 5.0" WVGA TFT LCD panel
+
+maintainers:
+  - Cristian Birsan <cristian.birsan@microchip.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: pda,91-00156-a0
+
+  power-supply: true
+  backlight: true
+  port: true
+
+required:
+  - compatible
+  - power-supply
+  - backlight
+
+additionalProperties: false
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/powertip,hx8238a.yaml

@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/powertip,hx8238a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Powertip Electronic Technology Co. 320 x 240 LCD panel
+
+maintainers:
+  - Lukasz Majewski <lukma@denx.de>
+
+allOf:
+  - $ref: panel-dpi.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: powertip,hx8238a
+      - {} # panel-dpi, but not listed here to avoid false select
+
+  height-mm: true
+  panel-timing: true
+  port: true
+  power-supply: true
+  width-mm: true
+
+additionalProperties: false
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/powertip,st7272.yaml

@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/powertip,st7272.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Powertip Electronic Technology Co. 320 x 240 LCD panel
+
+maintainers:
+  - Lukasz Majewski <lukma@denx.de>
+
+allOf:
+  - $ref: panel-dpi.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: powertip,st7272
+      - {} # panel-dpi, but not listed here to avoid false select
+
+  height-mm: true
+  panel-timing: true
+  port: true
+  power-supply: true
+  width-mm: true
+
+additionalProperties: false
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.yaml

@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raspberrypi,7inch-touchscreen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The official 7" (800x480) Raspberry Pi touchscreen
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+  This DSI panel contains:
+
+  - TC358762 DSI->DPI bridge
+  - Atmel microcontroller on I2C for power sequencing the DSI bridge and
+    controlling backlight
+  - Touchscreen controller on I2C for touch input
+
+  and this binding covers the DSI display parts but not its touch input.
+
+properties:
+  compatible:
+    const: raspberrypi,7inch-touchscreen-panel
+
+  reg:
+    const: 0x45
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |+
+    dsi1: dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      port {
+        dsi_out_port: endpoint {
+          remote-endpoint = <&panel_dsi_port>;
+        };
+      };
+    };
+
+    i2c_dsi: i2c {
+      compatible = "i2c-gpio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      scl-gpios = <&gpio 28 0>;
+      sda-gpios = <&gpio 29 0>;
+
+      lcd@45 {
+        compatible = "raspberrypi,7inch-touchscreen-panel";
+        reg = <0x45>;
+
+        port {
+          panel_dsi_port: endpoint {
+            remote-endpoint = <&dsi_out_port>;
+          };
+        };
+      };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml

@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm67191.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
+
+maintainers:
+  - Robert Chiras <robert.chiras@nxp.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: raydium,rm67191
+
+  reg:
+    maxItems: 1
+
+  port: true
+  reset-gpios: true
+  width-mm: true
+  height-mm: true
+
+  dsi-lanes:
+    description: Number of DSI lanes to be used must be <3> or <4>
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [3, 4]
+
+  v3p3-supply:
+    description: phandle to 3.3V regulator that powers the VDD_3V3 pin
+
+  v1p8-supply:
+    description: phandle to 1.8V regulator that powers the VDD_1V8 pin
+
+  video-mode:
+    description: |
+      0 - burst-mode
+      1 - non-burst with sync event
+      2 - non-burst with sync pulse
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+  - dsi-lanes
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "raydium,rm67191";
+            reg = <0>;
+            reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+            dsi-lanes = <4>;
+            width-mm = <68>;
+            height-mm = <121>;
+            video-mode = <1>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_out>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/raydium,rm67200.yaml

@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm67200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM67200 based MIPI-DSI panels
+
+maintainers:
+  - Sebastian Reichel <sebastian.reichel@collabora.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - wanchanglong,w552793baa
+      - const: raydium,rm67200
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: 2.8V Logic voltage
+
+  iovcc-supply:
+    description: 1.8V IO voltage
+
+  vsp-supply:
+    description: positive 5.5V voltage
+
+  vsn-supply:
+    description: negative 5.5V voltage
+
+  backlight: true
+  port: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - port
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "wanchanglong,w552793baa", "raydium,rm67200";
+            reg = <0>;
+
+            vdd-supply = <&regulator1>;
+            iovcc-supply = <&regulator2>;
+            vsp-supply = <&regulator3>;
+            vsn-supply = <&regulator4>;
+            reset-gpios = <&gpiobank 42 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm68200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel
+
+maintainers:
+  - Philippe CORNU <philippe.cornu@foss.st.com>
+
+description: |
+  The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
+  panel connected using a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    const: raydium,rm68200
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  backlight: true
+  enable-gpios: true
+  port: true
+  power-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - power-supply
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "raydium,rm68200";
+        reg = <0>;
+        reset-gpios = <&gpiof 15 0>;
+        power-supply = <&v1v8>;
+        backlight = <&pwm_backlight>;
+      };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml

@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm692e5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM692E5 based DSI display panels
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+  The Raydium RM692E5 is a generic DSI Panel IC used to control
+  AMOLED panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fairphone,fp5-rm692e5-boe
+      - const: raydium,rm692e5
+
+  reg:
+    maxItems: 1
+
+  dvdd-supply:
+    description: Digital voltage rail
+
+  vci-supply:
+    description: Analog voltage rail
+
+  vddio-supply:
+    description: I/O voltage rail
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - dvdd-supply
+  - vci-supply
+  - vddio-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "fairphone,fp5-rm692e5-boe", "raydium,rm692e5";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+            dvdd-supply = <&vreg_oled_vci>;
+            vci-supply = <&vreg_l12c>;
+            vddio-supply = <&vreg_oled_dvdd>;
+
+            port {
+                panel_in_0: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/raydium,rm69380.yaml

@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm69380.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM69380-based DSI display panels
+
+maintainers:
+  - David Wronek <david@mainlining.org>
+
+description:
+  The Raydium RM69380 is a generic DSI panel IC used to control
+  OLED panels.
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - lenovo,j716f-edo-rm69380
+      - const: raydium,rm69380
+    description: This indicates the panel manufacturer of the panel
+      that is in turn using the RM69380 panel driver. The compatible
+      string determines how the RM69380 panel driver shall be configured
+      to work with the indicated panel. The raydium,rm69380 compatible shall
+      always be provided as a fallback.
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog voltage rail
+
+  vddio-supply:
+    description: I/O voltage rail
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be active low
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vddio-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "lenovo,j716f-edo-rm69380", "raydium,rm69380";
+            reg = <0>;
+
+            avdd-supply = <&panel_avdd_regulator>;
+            vddio-supply = <&vreg_l14a>;
+            reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in_0: endpoint {
+                        remote-endpoint = <&mdss_dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    panel_in_1: endpoint {
+                        remote-endpoint = <&mdss_dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/renesas,r61307.yaml

@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/renesas,r61307.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R61307 based DSI Display Panel
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+  The Renesas R61307 is a generic DSI Panel IC used to control LCD panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+            # KOE/HITACHI TX13D100VM0EAA 5.0" XGA TFT LCD panel
+          - hit,tx13d100vm0eaa
+          - koe,tx13d100vm0eaa
+      - const: renesas,r61307
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Regulator for main power supply.
+
+  iovcc-supply:
+    description: Regulator for 1.8V IO power supply.
+
+  renesas,gamma:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      0 - disabled
+      1-3 - gamma setting A presets
+    enum: [0, 1, 2, 3]
+
+  renesas,column-inversion:
+    type: boolean
+    description: switch between line and column inversion. The line
+      inversion is set by default.
+
+  renesas,contrast:
+    type: boolean
+    description: digital contrast adjustment
+
+  backlight: true
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+  - port
+  - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@1 {
+            compatible = "koe,tx13d100vm0eaa", "renesas,r61307";
+            reg = <1>;
+
+            reset-gpios = <&gpio 176 GPIO_ACTIVE_LOW>;
+
+            renesas,gamma = <3>;
+            renesas,column-inversion;
+            renesas,contrast;
+
+            vcc-supply = <&vcc_3v0_lcd>;
+            iovcc-supply = <&iovcc_1v8_lcd>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/renesas,r69328.yaml

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/renesas,r69328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R69328 based DSI Display Panel
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+  The Renesas R69328 is a generic DSI Panel IC used to control LCD panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+            # JDI DX12D100VM0EAA 4.7" WXGA TFT LCD panel
+          - jdi,dx12d100vm0eaa
+      - const: renesas,r69328
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator for main power supply.
+
+  vddio-supply:
+    description: Regulator for 1.8V IO power supply.
+
+  backlight: true
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+  - port
+  - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@1 {
+            compatible = "jdi,dx12d100vm0eaa", "renesas,r69328";
+            reg = <1>;
+
+            reset-gpios = <&gpio 176 GPIO_ACTIVE_LOW>;
+
+            vdd-supply = <&vdd_3v0_lcd>;
+            vddio-supply = <&vdd_1v8_io>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml

@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
+
+maintainers:
+  - Ondrej Jirman <megi@xff.cz>
+  - Guido Gŭnther <agx@sigxcpu.org>
+
+description:
+  Rocktech JH057N00900 is a 720x1440 TFT LCD panel
+  connected using a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
+      - anbernic,rg353v-panel-v2
+      # GameForce Chi 3.5" 640x480 TFT LCD panel
+      - gameforce,chi-panel
+      # Powkiddy RGB10MAX3 5.0" 720x1280 TFT LCD panel
+      - powkiddy,rgb10max3-panel
+      # Powkiddy RGB30 3.0" 720x720 TFT LCD panel
+      - powkiddy,rgb30-panel
+      # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
+      - rocktech,jh057n00900
+      # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
+      - xingbangda,xbd599
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vcc-supply:
+    description: Panel power supply
+
+  iovcc-supply:
+    description: I/O voltage supply
+
+  backlight: true
+  port: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+  - iovcc-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "rocktech,jh057n00900";
+            reg = <0>;
+            vcc-supply = <&reg_2v8_p>;
+            iovcc-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR X11)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ronbo,rb070d30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ronbo RB070D30 DSI Display Panel
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: ronbo,rb070d30
+
+  reg:
+    maxItems: 1
+
+  power-gpios:
+    description: GPIO used for the power pin
+    maxItems: 1
+
+  shlr-gpios:
+    description: GPIO used for the shlr pin (horizontal flip)
+    maxItems: 1
+
+  updn-gpios:
+    description: GPIO used for the updn pin (vertical flip)
+    maxItems: 1
+
+  vcc-lcd-supply:
+    description: Power regulator
+
+required:
+  - compatible
+  - power-gpios
+  - reg
+  - reset-gpios
+  - shlr-gpios
+  - updn-gpios
+  - vcc-lcd-supply
+  - port
+
+unevaluatedProperties: false

linux-7.2.3/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml

@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,amoled-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMOLED MIPI-DSI panels
+
+maintainers:
+  - Hoegeun Kwon <hoegeun.kwon@samsung.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s6e3ha2
+              - samsung,s6e3hf2
+    then:
+      required:
+        - enable-gpios
+
+properties:
+  compatible:
+    enum:
+        # Samsung S6E63J0X03 1.63" 320x320 AMOLED panel
+      - samsung,s6e63j0x03
+        # Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+      - samsung,s6e3ha2
+        # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
+      - samsung,s6e3hf2
+
+  reg:
+    maxItems: 1
+
+  reset-gpios: true
+  enable-gpios: true
+  te-gpios: true
+
+  vdd3-supply:
+    description: I/O voltage supply
+
+  vci-supply:
+    description: voltage supply for analog circuits
+
+required:
+  - compatible
+  - reg
+  - vdd3-supply
+  - vci-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,s6e3ha2";
+            reg = <0>;
+            vdd3-supply = <&ldo27_reg>;
+            vci-supply = <&ldo28_reg>;
+            reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+            te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml

@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ams495qa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS495QA01 panel with Magnachip D53E6EA8966 controller
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: samsung,ams495qa01
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description: reset gpio, must be GPIO_ACTIVE_LOW
+  elvdd-supply:
+    description: regulator that supplies voltage to the panel display
+  enable-gpios: true
+  port: true
+  vdd-supply:
+    description: regulator that supplies voltage to panel logic
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "samsung,ams495qa01";
+            reg = <0>;
+            reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_3v3>;
+
+            port {
+                mipi_in_panel: endpoint {
+                  remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...