Resguardo inicial

linux-7.2.3/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml

@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,analogix-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Analogix Display Port
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-dp
+      - rockchip,rk3399-edp
+      - rockchip,rk3588-edp
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: dp
+      - const: pclk
+      - const: grf
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: dp
+      - const: apb
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This SoC makes use of GRF regs.
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - rockchip,grf
+
+allOf:
+  - $ref: /schemas/display/bridge/analogix,dp.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3588-edp
+    then:
+      properties:
+        resets:
+          minItems: 2
+        reset-names:
+          minItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    dp@ff970000 {
+      compatible = "rockchip,rk3288-dp";
+      reg = <0xff970000 0x4000>;
+      interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+      clock-names = "dp", "pclk";
+      phys = <&dp_phy>;
+      phy-names = "dp";
+      resets = <&cru 111>;
+      reset-names = "dp";
+      rockchip,grf = <&grf>;
+      pinctrl-0 = <&edp_hpd>;
+      pinctrl-names = "default";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          edp_in_vopb: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vopb_out_edp>;
+          };
+          edp_in_vopl: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vopl_out_edp>;
+          };
+        };
+
+        edp_out: port@1 {
+          reg = <1>;
+
+          edp_out_panel: endpoint {
+            remote-endpoint = <&panel_in_edp>;
+          };
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml

@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DW DisplayPort Transmitter
+
+maintainers:
+  - Andy Yan <andy.yan@rock-chips.com>
+
+description: |
+  The Rockchip RK3588 SoC integrates the Synopsys DesignWare DPTX controller
+  which is compliant with the DisplayPort Specification Version 1.4 with the
+  following features:
+
+  * DisplayPort 1.4a
+  * Main Link: 1/2/4 lanes
+  * Main Link Support 1.62Gbps, 2.7Gbps, 5.4Gbps and 8.1Gbps
+  * AUX channel 1Mbps
+  * Single Stream Transport(SST)
+  * Multistream Transport (MST)
+  * Type-C support (alternate mode)
+  * HDCP 2.2, HDCP 1.3
+  * Supports up to 8/10 bits per color component
+  * Supports RBG, YCbCr4:4:4, YCbCr4:2:2, YCbCr4:2:0
+  * Pixel clock up to 594MHz
+  * I2S, SPDIF audio interface
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3576-dp
+      - rockchip,rk3588-dp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Peripheral/APB bus clock
+      - description: DisplayPort AUX clock
+      - description: HDCP clock
+      - description: I2S interface clock
+      - description: SPDIF interfce clock
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: apb
+      - const: aux
+      - const: hdcp
+      - const: i2s
+      - const: spdif
+
+  phys:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for RGB/YUV input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DP output.
+
+    required:
+      - port@0
+      - port@1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - phys
+  - ports
+  - resets
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3588-dp
+    then:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          minItems: 5
+    else:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          maxItems: 3
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/rk3588-power.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      dp@fde50000 {
+        compatible = "rockchip,rk3588-dp";
+        reg = <0x0 0xfde50000 0x0 0x4000>;
+        interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&cru PCLK_DP0>, <&cru CLK_AUX16M_0>,
+        <&cru CLK_DP0>, <&cru MCLK_I2S4_8CH_TX>,
+        <&cru MCLK_SPDIF2_DP0>;
+        clock-names = "apb", "aux", "hdcp", "i2s", "spdif";
+        assigned-clocks = <&cru CLK_AUX16M_0>;
+        assigned-clock-rates = <16000000>;
+        resets = <&cru SRST_DP0>;
+        phys = <&usbdp_phy0 PHY_TYPE_DP>;
+        power-domains = <&power RK3588_PD_VO0>;
+        #sound-dai-cells = <0>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            dp0_in_vp2: endpoint {
+              remote-endpoint = <&vp2_out_dp0>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            dp0_out_con0: endpoint {
+              remote-endpoint = <&dp_con0_in>;
+            };
+          };
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml

@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DWC HDMI TX Encoder
+
+maintainers:
+  - Mark Yao <markyao0591@gmail.com>
+
+description: |
+  The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+  with a companion PHY IP.
+
+allOf:
+  - $ref: ../bridge/synopsys,dw-hdmi.yaml#
+  - $ref: /schemas/sound/dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3228-dw-hdmi
+      - rockchip,rk3288-dw-hdmi
+      - rockchip,rk3328-dw-hdmi
+      - rockchip,rk3368-dw-hdmi
+      - rockchip,rk3399-dw-hdmi
+      - rockchip,rk3568-dw-hdmi
+
+  reg-io-width:
+    const: 4
+
+  avdd-0v9-supply:
+    description:
+      A 0.9V supply that powers up the SoC internal circuitry. The actual pin name
+      varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes
+      HDMI_AVDD_1V0.
+
+  avdd-1v8-supply:
+    description:
+      A 1.8V supply that powers up the SoC internal circuitry. The pin name on the
+      SoC usually is HDMI_TX_AVDD_1V8.
+
+  clocks:
+    minItems: 2
+    items:
+      - {}
+      - {}
+      # The next three clocks are all optional, but shall be specified in this
+      # order when present.
+      - description: The HDMI CEC controller main clock
+      - description: Power for GRF IO
+      - description: External clock for some HDMI PHY (old clock name, deprecated)
+      - description: External clock for some HDMI PHY (new name)
+
+  clock-names:
+    minItems: 2
+    items:
+      - {}
+      - {}
+      - enum:
+          - cec
+          - grf
+          - vpll
+          - ref
+      - enum:
+          - grf
+          - vpll
+          - ref
+      - enum:
+          - vpll
+          - ref
+
+  phys:
+    maxItems: 1
+    description: The HDMI PHY
+
+  phy-names:
+    const: hdmi
+
+  pinctrl-names:
+    description:
+      The unwedge pinctrl entry shall drive the DDC SDA line low. This is
+      intended to work around a hardware errata that can cause the DDC I2C
+      bus to be wedged.
+    minItems: 1
+    items:
+      - const: default
+      - const: unwedge
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input of the DWC HDMI TX
+        properties:
+          endpoint:
+            description: Connection to the VOP
+          endpoint@0:
+            description: Connection to the VOPB
+          endpoint@1:
+            description: Connection to the VOPL
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output of the DWC HDMI TX
+
+    required:
+      - port@0
+      - port@1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the GRF to mux vopl/vopb.
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-io-width
+  - clocks
+  - clock-names
+  - interrupts
+  - ports
+  - rockchip,grf
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/rk3288-power.h>
+
+    hdmi: hdmi@ff980000 {
+        compatible = "rockchip,rk3288-dw-hdmi";
+        reg = <0xff980000 0x20000>;
+        reg-io-width = <4>;
+        interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+        clock-names = "iahb", "isfr";
+        ddc-i2c-bus = <&i2c5>;
+        power-domains = <&power RK3288_PD_VIO>;
+        rockchip,grf = <&grf>;
+        #sound-dai-cells = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                hdmi_in_vopb: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&vopb_out_hdmi>;
+                };
+
+                hdmi_in_vopl: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&vopl_out_hdmi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                hdmi_out_con: endpoint {
+                    remote-endpoint = <&hdmi_con_in>;
+                };
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml

@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Synopsys Designware MIPI DSI
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,px30-mipi-dsi
+          - rockchip,rk3128-mipi-dsi
+          - rockchip,rk3288-mipi-dsi
+          - rockchip,rk3368-mipi-dsi
+          - rockchip,rk3399-mipi-dsi
+          - rockchip,rk3506-mipi-dsi
+          - rockchip,rk3568-mipi-dsi
+          - rockchip,rv1126-mipi-dsi
+      - const: snps,dw-mipi-dsi
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    oneOf:
+      - minItems: 2
+        items:
+          - const: ref
+          - const: pclk
+          - const: phy_cfg
+          - const: grf
+      - const: pclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This SoC uses GRF regs to switch between vopl/vopb.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  "#phy-cells":
+    const: 0
+    description:
+      Defined when in use as ISP phy.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - rockchip,grf
+
+allOf:
+  - $ref: /schemas/display/bridge/snps,dw-mipi-dsi.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-mipi-dsi
+              - rockchip,rk3128-mipi-dsi
+              - rockchip,rk3368-mipi-dsi
+              - rockchip,rk3506-mipi-dsi
+              - rockchip,rk3568-mipi-dsi
+              - rockchip,rv1126-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+      required:
+        - phys
+        - phy-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+
+        clock-names:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 4
+
+        clock-names:
+          minItems: 4
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mipi_dsi: dsi@ff960000 {
+      compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+      reg = <0xff960000 0x4000>;
+      interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>;
+      clock-names = "ref", "pclk";
+      resets = <&cru SRST_MIPIDSI0>;
+      reset-names = "apb";
+      rockchip,grf = <&grf>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mipi_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          mipi_in_vopb: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vopb_out_mipi>;
+          };
+          mipi_in_vopl: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vopl_out_mipi>;
+          };
+        };
+
+        mipi_out: port@1 {
+          reg = <1>;
+
+          mipi_out_panel: endpoint {
+            remote-endpoint = <&panel_in_mipi>;
+          };
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml

@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,inno-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Innosilicon HDMI controller
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-inno-hdmi
+      - rockchip,rk3128-inno-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The HDMI controller main clock
+      - description: The HDMI PHY reference clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: ref
+
+  power-domains:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a vop node.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a hdmi-connector node.
+
+    required:
+      - port@0
+      - port@1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF used for control the polarity of hsync/vsync of rk3036
+      HDMI.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pinctrl-0
+  - pinctrl-names
+  - ports
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3036-inno-hdmi
+
+    then:
+      required:
+        - rockchip,grf
+      properties:
+        power-domains: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3128-inno-hdmi
+
+    then:
+      required:
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3036-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    hdmi: hdmi@20034000 {
+      compatible = "rockchip,rk3036-inno-hdmi";
+      reg = <0x20034000 0x4000>;
+      interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru PCLK_HDMI>, <&cru SCLK_LCDC>;
+      clock-names = "pclk", "ref";
+      pinctrl-names = "default";
+      pinctrl-0 = <&hdmi_ctl>;
+      rockchip,grf = <&grf>;
+      #sound-dai-cells = <0>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi_in: port@0 {
+          reg = <0>;
+          hdmi_in_vop: endpoint {
+            remote-endpoint = <&vop_out_hdmi>;
+          };
+        };
+
+        hdmi_out: port@1 {
+          reg = <1>;
+          hdmi_out_con: endpoint {
+            remote-endpoint = <&hdmi_con_in>;
+          };
+        };
+      };
+    };
+
+    pinctrl {
+      hdmi {
+        hdmi_ctl: hdmi-ctl {
+          rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>,
+                          <1 RK_PB1 1 &pcfg_pull_none>,
+                          <1 RK_PB2 1 &pcfg_pull_none>,
+                          <1 RK_PB3 1 &pcfg_pull_none>;
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/rockchip/rockchip,lvds.yaml

@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip low-voltage differential signal (LVDS) transmitter
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-lvds
+      - rockchip,rk3288-lvds
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk_lvds
+
+  avdd1v0-supply:
+    description: 1.0V analog power.
+
+  avdd1v8-supply:
+    description: 1.8V analog power.
+
+  avdd3v3-supply:
+    description: 3.3V analog power.
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the general register files syscon.
+
+  rockchip,output:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [rgb, lvds, duallvds]
+    description: This describes the output interface.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  pinctrl-names:
+    const: lcdc
+
+  pinctrl-0: true
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port 0 for the VOP input.
+          The remote endpoint maybe vopb or vopl.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port 1 for either a panel or subsequent encoder.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - rockchip,grf
+  - rockchip,output
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-lvds
+
+    then:
+      properties:
+        reg: false
+        clocks: false
+        clock-names: false
+        avdd1v0-supply: false
+        avdd1v8-supply: false
+        avdd3v3-supply: false
+
+      required:
+        - phys
+        - phy-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-lvds
+
+    then:
+      properties:
+        phys: false
+        phy-names: false
+
+      required:
+        - reg
+        - clocks
+        - clock-names
+        - avdd1v0-supply
+        - avdd1v8-supply
+        - avdd3v3-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+
+    lvds: lvds@ff96c000 {
+      compatible = "rockchip,rk3288-lvds";
+      reg = <0xff96c000 0x4000>;
+      clocks = <&cru PCLK_LVDS_PHY>;
+      clock-names = "pclk_lvds";
+      avdd1v0-supply = <&vdd10_lcd>;
+      avdd1v8-supply = <&vcc18_lcd>;
+      avdd3v3-supply = <&vcca_33>;
+      pinctrl-names = "lcdc";
+      pinctrl-0 = <&lcdc_ctl>;
+      rockchip,grf = <&grf>;
+      rockchip,output = "rgb";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lvds_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          lvds_in_vopb: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vopb_out_lvds>;
+          };
+          lvds_in_vopl: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vopl_out_lvds>;
+          };
+        };
+
+        lvds_out: port@1 {
+          reg = <1>;
+
+          lvds_out_panel: endpoint {
+            remote-endpoint = <&panel_in_lvds>;
+          };
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml

@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3066-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3066 HDMI controller
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+properties:
+  compatible:
+    const: rockchip,rk3066-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: hclk
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
+
+  "#sound-dai-cells":
+    const: 0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with two endpoints, numbered 0 and 1,
+          connected respectively to vop0 and vop1.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a hdmi-connector node.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pinctrl-0
+  - pinctrl-names
+  - power-domains
+  - rockchip,grf
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3066a-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/power/rk3066-power.h>
+    hdmi: hdmi@10116000 {
+      compatible = "rockchip,rk3066-hdmi";
+      reg = <0x10116000 0x2000>;
+      interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru HCLK_HDMI>;
+      clock-names = "hclk";
+      pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
+      pinctrl-names = "default";
+      power-domains = <&power RK3066_PD_VIO>;
+      rockchip,grf = <&grf>;
+      #sound-dai-cells = <0>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hdmi_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+          hdmi_in_vop0: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vop0_out_hdmi>;
+          };
+          hdmi_in_vop1: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vop1_out_hdmi>;
+          };
+        };
+        hdmi_out: port@1 {
+          reg = <1>;
+          hdmi_out_con: endpoint {
+            remote-endpoint = <&hdmi_con_in>;
+          };
+        };
+      };
+    };
+
+    pinctrl {
+      hdmi {
+        hdmi_hpd: hdmi-hpd {
+          rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
+        };
+        hdmii2c_xfer: hdmii2c-xfer {
+          rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
+                          <0 RK_PA2 1 &pcfg_pull_none>;
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3399-cdn-dp.yaml

@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3399-cdn-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3399 specific extensions to the CDN Display Port
+
+maintainers:
+  - Andy Yan <andy.yan@rock-chip.com>
+  - Heiko Stuebner <heiko@sntech.de>
+  - Sandy Huang <hjc@rock-chips.com>
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: rockchip,rk3399-cdn-dp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: DP core work clock
+      - description: APB clock
+      - description: SPDIF interface clock
+      - description: GRF clock
+
+  clock-names:
+    items:
+      - const: core-clk
+      - const: pclk
+      - const: spdif
+      - const: grf
+
+  extcon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    items:
+      - description: Extcon device providing the cable state for DP PHY device 0
+        maxItems: 1
+      - description: Extcon device providing the cable state for DP PHY device 1
+        maxItems: 1
+    description:
+      List of phandle to the extcon device providing the cable state for the DP PHY.
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    minItems: 1
+    items:
+      - description: DP output to the DP PHY device 0
+      - description: DP output to the DP PHY device 1
+    description:
+      RK3399 have two DP-USB PHY, specifying one PHY which want to use, or
+      specify two PHYs here to let the driver determine which PHY to use.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input of the CDN DP
+
+        properties:
+          endpoint@0:
+            description: Connection to the VOPB
+
+          endpoint@1:
+            description: Connection to the VOPL
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output of the CDN DP
+
+    required:
+      - port@0
+      - port@1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 4
+
+  reset-names:
+    items:
+      - const: spdif
+      - const: dptx
+      - const: apb
+      - const: core
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF register to control HPD.
+
+  "#sound-dai-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - phys
+  - ports
+  - resets
+  - reset-names
+  - rockchip,grf
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3399-power.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dp@fec00000 {
+            compatible = "rockchip,rk3399-cdn-dp";
+            reg = <0x0 0xfec00000 0x0 0x100000>;
+            assigned-clocks = <&cru SCLK_DP_CORE>;
+            assigned-clock-rates = <100000000>;
+            interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>, <&cru SCLK_SPDIF_REC_DPTX>,
+                    <&cru PCLK_VIO_GRF>;
+            clock-names = "core-clk", "pclk", "spdif", "grf";
+            power-domains = <&power RK3399_PD_HDCP>;
+            phys = <&tcphy0_dp>, <&tcphy1_dp>;
+            resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>,
+                    <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>;
+            reset-names = "spdif", "dptx", "apb", "core";
+            rockchip,grf = <&grf>;
+            #sound-dai-cells = <1>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                dp_in: port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    dp_in_vopb: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&vopb_out_dp>;
+                    };
+
+                    dp_in_vopl: endpoint@1 {
+                        reg = <1>;
+                        remote-endpoint = <&vopl_out_dp>;
+                    };
+                };
+
+                dp_out: port@1 {
+                    reg = <1>;
+                };
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml

@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DW HDMI QP TX Encoder
+
+maintainers:
+  - Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
+
+description: |
+  Rockchip RK3588 SoC integrates the Synopsys DesignWare HDMI QP TX controller
+  IP and a HDMI/eDP TX Combo PHY based on a Samsung IP block, providing the
+  following features, among others:
+
+  * Fixed Rate Link (FRL)
+  * Display Stream Compression (DSC)
+  * 4K@120Hz and 8K@60Hz video modes
+  * Variable Refresh Rate (VRR) including Quick Media Switching (QMS)
+  * Fast Vactive (FVA)
+  * SCDC I2C DDC access
+  * Multi-stream audio
+  * Enhanced Audio Return Channel (EARC)
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3576-dw-hdmi-qp
+      - rockchip,rk3588-dw-hdmi-qp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral/APB bus clock
+      - description: EARC RX biphase clock
+      - description: Reference clock
+      - description: Audio interface clock
+      - description: TMDS/FRL link clock
+      - description: Video datapath clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: earc
+      - const: ref
+      - const: aud
+      - const: hdp
+      - const: hclk_vo1
+
+  interrupts:
+    items:
+      - description: AVP Unit interrupt
+      - description: CEC interrupt
+      - description: eARC RX interrupt
+      - description: Main Unit interrupt
+      - description: HPD interrupt
+
+  interrupt-names:
+    items:
+      - const: avp
+      - const: cec
+      - const: earc
+      - const: main
+      - const: hpd
+
+  no-hpd:
+    type: boolean
+    description:
+      The HPD pin is not present or used for another purpose, and the EDID
+      must be polled instead to determine if a device is attached.
+
+  phys:
+    maxItems: 1
+    description: The HDMI/eDP PHY
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for RGB/YUV input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for HDMI/eDP output.
+
+    required:
+      - port@0
+      - port@1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: ref
+      - const: hdp
+
+  "#sound-dai-cells":
+    const: 0
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some HDMI QP related data is accessed through SYS GRF regs.
+
+  rockchip,vo-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Additional HDMI QP related data is accessed through VO GRF regs.
+
+  frl-enable-gpios:
+    description:
+      Optional GPIO line to be asserted when operating in HDMI 2.1 FRL mode and
+      deasserted for HDMI 1.4/2.0 TMDS. It can be used to control external
+      voltage bias for HDMI data lines. When not present the HDMI encoder will
+      operate in TMDS mode only.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - phys
+  - ports
+  - resets
+  - reset-names
+  - rockchip,grf
+  - rockchip,vo-grf
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/power/rk3588-power.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      hdmi@fde80000 {
+        compatible = "rockchip,rk3588-dw-hdmi-qp";
+        reg = <0x0 0xfde80000 0x0 0x20000>;
+        clocks = <&cru PCLK_HDMITX0>,
+                 <&cru CLK_HDMITX0_EARC>,
+                 <&cru CLK_HDMITX0_REF>,
+                 <&cru MCLK_I2S5_8CH_TX>,
+                 <&cru CLK_HDMIHDP0>,
+                 <&cru HCLK_VO1>;
+        clock-names = "pclk", "earc", "ref", "aud", "hdp", "hclk_vo1";
+        interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH 0>;
+        interrupt-names = "avp", "cec", "earc", "main", "hpd";
+        phys = <&hdptxphy0>;
+        power-domains = <&power RK3588_PD_VO1>;
+        resets = <&cru SRST_HDMITX0_REF>, <&cru SRST_HDMIHDP0>;
+        reset-names = "ref", "hdp";
+        rockchip,grf = <&sys_grf>;
+        rockchip,vo-grf = <&vo1_grf>;
+        #sound-dai-cells = <0>;
+        frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            hdmi0_in_vp0: endpoint {
+              remote-endpoint = <&vp0_out_hdmi0>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            hdmi0_out_con0: endpoint {
+              remote-endpoint = <&hdmi_con0_in>;
+            };
+          };
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml

@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Synopsys Designware MIPI DSI2
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3576-mipi-dsi2
+      - rockchip,rk3588-mipi-dsi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: sys
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This SoC uses GRF regs to switch between vopl/vopb.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dcphy
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: apb
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input node to receive pixel data.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI output node to panel.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - rockchip,grf
+  - phys
+  - phy-names
+  - ports
+  - reg
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/rk3588-power.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      dsi@fde20000 {
+        compatible = "rockchip,rk3588-mipi-dsi2";
+        reg = <0x0 0xfde20000 0x0 0x10000>;
+        interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&cru PCLK_DSIHOST0>, <&cru CLK_DSIHOST0>;
+        clock-names = "pclk", "sys";
+        resets = <&cru SRST_P_DSIHOST0>;
+        reset-names = "apb";
+        power-domains = <&power RK3588_PD_VOP>;
+        phys = <&mipidcphy0 PHY_TYPE_DPHY>;
+        phy-names = "dcphy";
+        rockchip,grf = <&vop_grf>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          dsi0_in: port@0 {
+            reg = <0>;
+          };
+
+          dsi0_out: port@1 {
+            reg = <1>;
+          };
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-drm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DRM master device
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The Rockchip DRM master device is a virtual device needed to list all
+  vop devices or other display interface nodes that comprise the
+  graphics subsystem.
+
+properties:
+  compatible:
+    const: rockchip,display-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description: |
+      Should contain a list of phandles pointing to display interface port
+      of vop devices. vop definitions as defined in
+      Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "rockchip,display-subsystem";
+        ports = <&vopl_out>, <&vopb_out>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml

@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP)
+
+description:
+  VOP (Video Output Processor) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-vop-big
+      - rockchip,px30-vop-lit
+      - rockchip,rk3036-vop
+      - rockchip,rk3066-vop
+      - rockchip,rk3126-vop
+      - rockchip,rk3188-vop
+      - rockchip,rk3228-vop
+      - rockchip,rk3288-vop
+      - rockchip,rk3328-vop
+      - rockchip,rk3366-vop
+      - rockchip,rk3368-vop
+      - rockchip,rk3399-vop-big
+      - rockchip,rk3399-vop-lit
+      - rockchip,rk3506-vop
+      - rockchip,rv1126-vop
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to
+          the CRTC gamma LUT address.
+
+  interrupts:
+    maxItems: 1
+    description:
+      The VOP interrupt is shared by several interrupt sources, such as
+      frame start (VSYNC), line flag and other status interrupts.
+
+  clocks:
+    items:
+      - description: Clock for ddr buffer transfer.
+      - description: Pixel clock.
+      - description: Clock for the ahb bus to R/W the phy regs.
+
+  clock-names:
+    items:
+      - const: aclk_vop
+      - const: dclk_vop
+      - const: hclk_vop
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: dclk
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3288-power.h>
+    vopb: vopb@ff930000 {
+      compatible = "rockchip,rk3288-vop";
+      reg = <0xff930000 0x19c>,
+            <0xff931000 0x1000>;
+      interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_VOP0>,
+               <&cru DCLK_VOP0>,
+               <&cru HCLK_VOP0>;
+      clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+      power-domains = <&power RK3288_PD_VIO>;
+      resets = <&cru SRST_LCDC1_AXI>,
+               <&cru SRST_LCDC1_AHB>,
+               <&cru SRST_LCDC1_DCLK>;
+      reset-names = "axi", "ahb", "dclk";
+      iommus = <&vopb_mmu>;
+      vopb_out: port {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        vopb_out_edp: endpoint@0 {
+          reg = <0>;
+          remote-endpoint = <&edp_in_vopb>;
+        };
+        vopb_out_hdmi: endpoint@1 {
+          reg = <1>;
+          remote-endpoint = <&hdmi_in_vopb>;
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml

@@ -0,0 +1,315 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP2)
+
+description:
+  VOP2 (Video Output Processor v2) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory buffer to
+  an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+  - Andy Yan <andyshrk@163.com>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3566-vop
+      - rockchip,rk3568-vop
+      - rockchip,rk3576-vop
+      - rockchip,rk3588-vop
+
+  reg:
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to the CRTC gamma
+          LUT address.
+
+  reg-names:
+    items:
+      - const: vop
+      - const: gamma-lut
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    description:
+      For VOP version under rk3576, the interrupt is shared by several interrupt
+      sources, such as frame start (VSYNC), line flag and other interrupt status.
+      For VOP version from rk3576 there is a system interrupt for bus error, and
+      every video port has it's independent interrupts for vsync and other video
+      port related error interrupts.
+
+  interrupt-names:
+    items:
+      - const: sys
+      - const: vp0
+      - const: vp1
+      - const: vp2
+
+  # See compatible-specific constraints below.
+  clocks:
+    minItems: 5
+    items:
+      - description: Clock for ddr buffer transfer via axi.
+      - description: Clock for the ahb bus to R/W the regs.
+      - description: Pixel clock for video port 0.
+      - description: Pixel clock for video port 1.
+      - description: Pixel clock for video port 2.
+      - {}
+      - {}
+      - {}
+      - {}
+
+  clock-names:
+    minItems: 5
+    items:
+      - const: aclk
+      - const: hclk
+      - const: dclk_vp0
+      - const: dclk_vp1
+      - const: dclk_vp2
+      - {}
+      - {}
+      - {}
+      - {}
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF regs used for control the polarity of dclk/hsync/vsync of DPI,
+      also used for query vop memory bisr enable status, etc.
+
+  rockchip,vo1-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to VO GRF regs used for control the polarity of dclk/hsync/vsync of hdmi
+      on rk3588.
+
+  rockchip,vop-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to VOP GRF regs used for control data path between vopr and hdmi/edp.
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU GRF used for query vop memory bisr status on rk3588.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      "^port@[0-3]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of VP0/1/2/3.
+
+    required:
+      - port@0
+
+    unevaluatedProperties: false
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3566-vop
+              - rockchip,rk3568-vop
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+
+        clock-names:
+          maxItems: 5
+
+        interrupts:
+          maxItems: 1
+
+        interrupt-names: false
+
+        ports:
+          required:
+            - port@0
+            - port@1
+            - port@2
+
+        rockchip,vo1-grf: false
+        rockchip,vop-grf: false
+        rockchip,pmu: false
+
+      required:
+        - rockchip,grf
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3576-vop
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          items:
+            - {}
+            - {}
+            - {}
+            - {}
+            - {}
+            - description: Alternative pixel clock provided by HDMI PHY PLL.
+
+        clock-names:
+          minItems: 5
+          items:
+            - {}
+            - {}
+            - {}
+            - {}
+            - {}
+            - const: pll_hdmiphy0
+
+        interrupts:
+          minItems: 4
+
+        interrupt-names:
+          minItems: 4
+
+        ports:
+          required:
+            - port@0
+            - port@1
+            - port@2
+
+        rockchip,vo1-grf: false
+        rockchip,vop-grf: false
+
+      required:
+        - rockchip,grf
+        - rockchip,pmu
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-vop
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          items:
+            - {}
+            - {}
+            - {}
+            - {}
+            - {}
+            - description: Pixel clock for video port 3.
+            - description: Peripheral(vop grf/dsi) clock.
+            - description: Alternative pixel clock provided by HDMI0 PHY PLL.
+            - description: Alternative pixel clock provided by HDMI1 PHY PLL.
+
+        clock-names:
+          minItems: 7
+          items:
+            - {}
+            - {}
+            - {}
+            - {}
+            - {}
+            - const: dclk_vp3
+            - const: pclk_vop
+            - const: pll_hdmiphy0
+            - const: pll_hdmiphy1
+
+        interrupts:
+          maxItems: 1
+
+        interrupt-names: false
+
+        ports:
+          required:
+            - port@0
+            - port@1
+            - port@2
+            - port@3
+
+      required:
+        - rockchip,grf
+        - rockchip,vo1-grf
+        - rockchip,vop-grf
+        - rockchip,pmu
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/rk3568-cru.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/power/rk3568-power.h>
+        bus {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            vop: vop@fe040000 {
+                compatible = "rockchip,rk3568-vop";
+                reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+                reg-names = "vop", "gamma-lut";
+                interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cru ACLK_VOP>,
+                         <&cru HCLK_VOP>,
+                         <&cru DCLK_VOP0>,
+                         <&cru DCLK_VOP1>,
+                         <&cru DCLK_VOP2>;
+                clock-names = "aclk",
+                              "hclk",
+                              "dclk_vp0",
+                              "dclk_vp1",
+                              "dclk_vp2";
+                power-domains = <&power RK3568_PD_VO>;
+                rockchip,grf = <&grf>;
+                iommus = <&vop_mmu>;
+                vop_out: ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    vp0: port@0 {
+                        reg = <0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp1: port@1 {
+                        reg = <1>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp2: port@2 {
+                        reg = <2>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                };
+            };
+        };