Resguardo inicial

linux-7.2.3/Documentation/devicetree/bindings/fsi/aspeed,ast2400-cf-fsi-master.yaml

@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/aspeed,ast2400-cf-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASpeed ColdFire offloaded GPIO-based FSI master
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+allOf:
+  - $ref: /schemas/fsi/fsi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-cf-fsi-master
+      - aspeed,ast2500-cf-fsi-master
+
+  clock-gpios:
+    maxItems: 1
+    description: GPIO for FSI clock
+
+  data-gpios:
+    maxItems: 1
+    description: GPIO for FSI data signal
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO for enable signal
+
+  trans-gpios:
+    maxItems: 1
+    description: GPIO for voltage translator enable
+
+  mux-gpios:
+    maxItems: 1
+    description:
+      GPIO for pin multiplexing with other functions (eg, external FSI masters)
+
+  memory-region:
+    maxItems: 1
+    description:
+      Reference to the reserved memory for the ColdFire. Must be 2M aligned on
+      AST2400 and 1M aligned on AST2500.
+
+  aspeed,cvic:
+    description: Reference to the CVIC node.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  aspeed,sram:
+    description: Reference to the SRAM node.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - clock-gpios
+  - data-gpios
+  - enable-gpios
+  - trans-gpios
+  - mux-gpios
+  - memory-region
+  - aspeed,cvic
+  - aspeed,sram
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fsi-master {
+      compatible = "aspeed,ast2500-cf-fsi-master";
+      clock-gpios = <&gpio 0>;
+      data-gpios = <&gpio 1>;
+      enable-gpios = <&gpio 2>;
+      trans-gpios = <&gpio 3>;
+      mux-gpios = <&gpio 4>;
+      memory-region = <&coldfire_memory>;
+      aspeed,cvic = <&cvic>;
+      aspeed,sram = <&sram>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml

@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed FSI master
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The AST2600 and later contain two identical FSI masters. They share a
+  clock and have a separate interrupt line and output pins.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-fsi-master
+      - aspeed,ast2700-fsi-master
+
+  clocks:
+    maxItems: 1
+
+  cfam-reset-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin for CFAM reset
+
+  fsi-routing-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin for setting the FSI mux (internal or cabled)
+
+  fsi-mux-gpios:
+    maxItems: 1
+    description:
+      Input GPIO pin for detecting the desired FSI mux state
+
+  interrupts:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - aspeed,ast2600-fsi-master
+then:
+  properties:
+    reg:
+      maxItems: 1
+else:
+  properties:
+    reg:
+      minItems: 1
+      items:
+        - description: OPB control registers
+        - description: FSI controller registers
+        - description: FSI link address space
+    reg-names:
+      items:
+        - const: opb
+        - const: ctrl
+        - const: fsi
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+allOf:
+  - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    #include <dt-bindings/gpio/aspeed-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    fsi-master@1e79b000 {
+        compatible = "aspeed,ast2600-fsi-master";
+        reg = <0x1e79b000 0x94>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+        interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_fsi1_default>;
+        clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+        fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+        fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+        cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+
+        cfam@0,0 {
+            reg = <0 0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            chip-id = <0>;
+        };
+    };
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        fsi-master@21800000 {
+            compatible = "aspeed,ast2700-fsi-master";
+            reg = <0x0 0x21800000 0x0 0x100>,
+                  <0x0 0x21000000 0x0 0x1000>,
+                  <0x0 0x20000000 0x0 0x1000000>;
+            reg-names = "opb", "ctrl", "fsi";
+            #interrupt-cells = <1>;
+            interrupt-controller;
+            interrupts-extended = <&intc 6>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_fsi0_default>;
+            clocks = <&syscon 40>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/fsi/fsi-controller.yaml

@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/fsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSI Controller Common Properties
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  FSI (FRU (Field Replaceable Unit) Service Interface) is a two wire bus. The
+  FSI bus is connected to a CFAM (Common FRU Access Macro) which contains
+  various engines such as I2C controllers, SPI controllers, etc.
+
+properties:
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+  '#interrupt-cells':
+    const: 1
+
+  bus-frequency:
+    minimum: 1
+    maximum: 200000000
+
+  interrupt-controller: true
+
+  no-scan-on-init:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The FSI controller cannot scan the bus during initialization.
+
+patternProperties:
+  "cfam@[0-9a-f],[0-9a-f]":
+    type: object
+    properties:
+      chip-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Processor index, a global unique chip ID which is used to identify
+          the physical location of the chip in a system specific way.
+
+      bus-frequency:
+        minimum: 1
+        maximum: 100000000
+
+      reg:
+        maxItems: 1
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 1
+
+    required:
+      - reg
+
+    additionalProperties: true
+
+additionalProperties: true

linux-7.2.3/Documentation/devicetree/bindings/fsi/fsi-master-gpio.yaml

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/fsi-master-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: fsi-master-gpio
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+allOf:
+  - $ref: /schemas/fsi/fsi-controller.yaml
+
+properties:
+  compatible:
+    items:
+      - const: fsi-master-gpio
+
+  clock-gpios:
+    description: GPIO for FSI clock
+    maxItems: 1
+
+  data-gpios:
+    description: GPIO for FSI data signal
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO for enable signal
+    maxItems: 1
+
+  trans-gpios:
+    description: GPIO for voltage translator enable
+    maxItems: 1
+
+  mux-gpios:
+    description: GPIO for pin multiplexing with other functions (eg, external
+      FSI masters)
+    maxItems: 1
+
+  no-gpio-delays:
+    description:
+      Don't add extra delays between GPIO accesses. This is useful when the HW
+      GPIO block is running at a low enough frequency.
+    type: boolean
+
+required:
+  - compatible
+  - clock-gpios
+  - data-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fsi-master {
+        compatible = "fsi-master-gpio";
+        clock-gpios = <&gpio 0>;
+        data-gpios = <&gpio 1>;
+        enable-gpios = <&gpio 2>;
+        trans-gpios = <&gpio 3>;
+        mux-gpios = <&gpio 4>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/fsi/fsi.txt

@@ -0,0 +1,156 @@
+FSI bus & engine generic device tree bindings
+=============================================
+
+The FSI bus is probe-able, so the OS is able to enumerate FSI slaves, and
+engines within those slaves. However, we have a facility to match devicetree
+nodes to probed engines. This allows for fsi engines to expose non-probeable
+busses, which are then exposed by the device tree. For example, an FSI engine
+that is an I2C master - the I2C bus can be described by the device tree under
+the engine's device tree node.
+
+FSI masters may require their own DT nodes (to describe the master HW itself);
+that requirement is defined by the master's implementation, and is described by
+the fsi-master-* binding specifications.
+
+Under the masters' nodes, we can describe the bus topology using nodes to
+represent the FSI slaves and their slave engines. As a basic outline:
+
+  fsi-master {
+      /* top-level of FSI bus topology, bound to an FSI master driver and
+       * exposes an FSI bus */
+
+      fsi-slave@<link,id> {
+          /* this node defines the FSI slave device, and is handled
+           * entirely with FSI core code */
+
+          fsi-slave-engine@<addr> {
+              /* this node defines the engine endpoint & address range, which
+               * is bound to the relevant fsi device driver */
+               ...
+          };
+
+          fsi-slave-engine@<addr> {
+              ...
+          };
+
+      };
+  };
+
+Note that since the bus is probe-able, some (or all) of the topology may
+not be described; this binding only provides an optional facility for
+adding subordinate device tree nodes as children of FSI engines.
+
+FSI masters
+-----------
+
+FSI master nodes declare themselves as such with the "fsi-master" compatible
+value. It's likely that an implementation-specific compatible value will
+be needed as well, for example:
+
+    compatible = "fsi-master-gpio", "fsi-master";
+
+Since the master nodes describe the top-level of the FSI topology, they also
+need to declare the FSI-standard addressing scheme. This requires two cells for
+addresses (link index and slave ID), and no size:
+
+    #address-cells = <2>;
+    #size-cells = <0>;
+
+An optional boolean property can be added to indicate that a particular master
+should not scan for connected devices at initialization time.  This is
+necessary in cases where a scan could cause arbitration issues with other
+masters that may be present on the bus.
+
+    no-scan-on-init;
+
+FSI slaves
+----------
+
+Slaves are identified by a (link-index, slave-id) pair, so require two cells
+for an address identifier. Since these are not a range, no size cells are
+required. For an example, a slave on link 1, with ID 2, could be represented
+as:
+
+    cfam@1,2 {
+        reg = <1 2>;
+	[...];
+    }
+
+Each slave provides an address-space, under which the engines are accessible.
+That address space has a maximum of 23 bits, so we use one cell to represent
+addresses and sizes in the slave address space:
+
+    #address-cells = <1>;
+    #size-cells = <1>;
+
+Optionally, a slave can provide a global unique chip ID which is used to
+identify the physical location of the chip in a system specific way
+
+    chip-id = <0>;
+
+FSI engines (devices)
+---------------------
+
+Engines are identified by their address under the slaves' address spaces. We
+use a single cell for address and size. Engine nodes represent the endpoint
+FSI device, and are passed to those FSI device drivers' ->probe() functions.
+
+For example, for a slave using a single 0x400-byte page starting at address
+0xc00:
+
+    engine@c00 {
+        reg = <0xc00 0x400>;
+    };
+
+
+Full example
+------------
+
+Here's an example that illustrates:
+ - an FSI master
+   - connected to an FSI slave
+     - that contains an engine that is an I2C master
+       - connected to an I2C EEPROM
+
+The FSI master may be connected to additional slaves, and slaves may have
+additional engines, but they don't necessarily need to be describe in the
+device tree if no extra platform information is required.
+
+    /* The GPIO-based FSI master node, describing the top level of the
+     * FSI bus
+     */
+    gpio-fsi {
+        compatible = "fsi-master-gpio", "fsi-master";
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        /* A FSI slave (aka. CFAM) at link 0, ID 0. */
+        cfam@0,0 {
+            reg = <0 0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+	    chip-id = <0>;
+
+            /* FSI engine at 0xc00, using a single page. In this example,
+             * it's an I2C master controller, so subnodes describe the
+             * I2C bus.
+             */
+            i2c-controller@c00 {
+                reg = <0xc00 0x400>;
+
+                /* Engine-specific data. In this case, we're describing an
+                 * I2C bus, so we're conforming to the generic I2C binding
+                 */
+                compatible = "some-vendor,fsi-i2c-controller";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                /* I2C endpoint device: an Atmel EEPROM */
+                eeprom@50 {
+                    compatible = "atmel,24c256";
+                    reg = <0x50>;
+                    pagesize = <64>;
+                };
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml

@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,fsi2spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SPI controllers
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this
+  node will always be a child of an FSI CFAM node. This FSI2SPI engine provides
+  access to a number of SPI controllers.
+
+properties:
+  compatible:
+    enum:
+      - ibm,fsi2spi
+
+  reg:
+    items:
+      - description: FSI slave address
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^spi@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/spi/ibm,spi-fsi.yaml
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    fsi2spi@1c00 {
+        compatible = "ibm,fsi2spi";
+        reg = <0x1c00 0x400>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        spi@0 {
+            compatible = "ibm,spi-fsi";
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eeprom@0 {
+                compatible = "atmel,at25";
+                reg = <0>;
+                address-width = <24>;
+                pagesize = <256>;
+                size = <0x80000>;
+                spi-max-frequency = <1000000>;
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml

@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,i2cr-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM I2C Responder virtual FSI master
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  The I2C Responder (I2CR) is a an I2C device that's connected to an FSI CFAM
+  (see fsi.txt). The I2CR translates I2C bus operations to FSI CFAM reads and
+  writes or SCOM operations, thereby acting as an FSI master.
+
+properties:
+  compatible:
+    enum:
+      - ibm,i2cr-fsi-master
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2cr@20 {
+        compatible = "ibm,i2cr-fsi-master";
+        reg = <0x20>;
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml

@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-fsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached FSI Hub Controller
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The FSI Hub Controller is an FSI controller, providing a number of FSI links,
+  located on a CFAM. Therefore this node will always be a child of an FSI CFAM
+  node.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-fsi-controller
+
+  reg:
+    items:
+      - description: FSI slave address
+
+allOf:
+  - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fsi@3400 {
+        compatible = "ibm,p9-fsi-controller";
+        reg = <0x3400 0x400>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        cfam@0,0 {
+            reg = <0 0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            chip-id = <0>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml

@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-occ.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached On-Chip Controller (OCC)
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The POWER processor On-Chip Controller (OCC) helps manage power and
+  thermals for the system, accessed through the FSI-attached SBEFIFO
+  from a service processor.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-occ
+      - ibm,p10-occ
+
+  hwmon:
+    type: object
+    $ref: /schemas/hwmon/ibm,occ-hwmon.yaml
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    occ {
+        compatible = "ibm,p9-occ";
+
+        hwmon {
+            compatible = "ibm,p9-occ-hwmon";
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml

@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-sbefifo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SBEFIFO engine
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The SBEFIFO is an FSI CFAM engine that provides an interface to the
+  POWER processor Self Boot Engine (SBE). This node will always be a child
+  of an FSI CFAM node.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-sbefifo
+      - ibm,odyssey-sbefifo
+
+  reg:
+    items:
+      - description: FSI slave address
+
+  occ:
+    type: object
+    $ref: ibm,p9-occ.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    fsi-slave-engine@2400 {
+        compatible = "ibm,p9-sbefifo";
+        reg = <0x2400 0x400>;
+
+        occ {
+            compatible = "ibm,p9-occ";
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml

@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-scom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SCOM engine
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The SCOM engine is an interface to the POWER processor PIB (Pervasive
+  Interconnect Bus). This node will always be a child of an FSI CFAM node.
+
+properties:
+  compatible:
+    enum:
+      - ibm,fsi2pib
+      - ibm,p9-scom
+      - ibm,i2cr-scom
+
+  reg:
+    items:
+      - description: FSI slave address
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    scom@1000 {
+        compatible = "ibm,p9-scom";
+        reg = <0x1000 0x400>;
+    };