Resguardo inicial

2026-09-06 12:53:21 -06:00
parent 662efe3c2a
commit ad2088d178
94853 changed files with 43200404 additions and 0 deletions
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adis16201.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADIS16201 Dual Axis Inclinometer and similar
+
+maintainers:
+  - Jonathan Cameron <Jonathan.Cameron@huawei.com>
+
+description: |
+  Two similar parts from external interface point of view.
+  SPI interface.
+    https://www.analog.com/en/products/adis16201.html
+    https://www.analog.com/en/products/adis16209.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16201
+      - adi,adis16209
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@0 {
+            compatible = "adi,adis16201";
+            reg = <0>;
+            spi-max-frequency = <2500000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adis16240.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADIS16240 Programmable Impact Sensor and Recorder driver
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  ADIS16240 Programmable Impact Sensor and Recorder driver that supports
+  SPI interface.
+    https://www.analog.com/en/products/adis16240.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16240
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "adi,adis16240";
+            reg = <0>;
+            spi-max-frequency = <2500000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometers
+
+maintainers:
+  - Lucas Stankus <lucas.p.stankus@gmail.com>
+
+description: |
+  Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometer that
+  support both I2C & SPI interfaces.
+    https://www.analog.com/en/products/adxl312.html
+    https://www.analog.com/en/products/adxl313.html
+    https://www.analog.com/en/products/adxl314.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl312
+      - adi,adxl313
+      - adi,adxl314
+
+  reg:
+    maxItems: 1
+
+  spi-3wire: true
+
+  vs-supply:
+    description: Regulator that supplies power to the accelerometer
+
+  vdd-supply:
+    description: Regulator that supplies the digital interface supply voltage
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@53 {
+            compatible = "adi,adxl313";
+            reg = <0x53>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "adi,adxl313";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl345.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
+  both I2C & SPI interfaces.
+    https://www.analog.com/en/products/mems/accelerometers/adxl345.html
+    https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: adi,adxl346
+          - const: adi,adxl345
+      - enum:
+          - adi,adxl345
+          - adi,adxl375
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-3wire: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [INT1, INT2]
+      - const: INT2
+
+dependencies:
+  interrupts: [ interrupt-names ]
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@2a {
+            compatible = "adi,adxl345";
+            reg = <0x2a>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "adi,adxl345";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpol;
+            spi-cpha;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+                         <1 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1", "INT2";
+        };
+    };
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers
+
+maintainers:
+  - Puranjay Mohan <puranjay12@gmail.com>
+
+description: |
+  Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers that
+  support both I2C & SPI interfaces
+    https://www.analog.com/en/products/adxl355.html
+    https://www.analog.com/en/products/adxl359.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl355
+      - adi,adxl359
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+    description: |
+      Type for DRDY should be IRQ_TYPE_EDGE_RISING.
+      Three configurable interrupt lines exist.
+
+  interrupt-names:
+    description: Specify which interrupt line is in use.
+    items:
+      enum:
+        - INT1
+        - INT2
+        - DRDY
+    minItems: 1
+    maxItems: 3
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@1d {
+            compatible = "adi,adxl355";
+            reg = <0x1d>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "DRDY";
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@0 {
+            compatible = "adi,adxl355";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "DRDY";
+        };
+    };
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl367.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL367 3-Axis Digital Accelerometer
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
+
+  The ADXL367 does not alias input signals by to achieve ultralow power
+  consumption, it samples the full bandwidth of the sensor at all
+  data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
+  with a resolution of 0.25mg/LSB on the +-2 g range.
+
+  In addition to its ultralow power consumption, the ADXL367
+  has many features to enable true system level power reduction.
+  It includes a deep multimode output FIFO, a built-in micropower
+  temperature sensor, and an internal ADC for synchronous conversion
+  of an additional analog input.
+    https://www.analog.com/en/products/adxl367.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl367
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@53 {
+        compatible = "adi,adxl367";
+        reg = <0x53>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@0 {
+        compatible = "adi,adxl367";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl372.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL371/ADXL372 3-Axis, +/-(200g) Digital Accelerometer
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  Analog Devices ADXL371/ADXL372 3-Axis, +/-(200g) Digital Accelerometer that
+  supports both I2C & SPI interfaces
+    https://www.analog.com/en/products/adxl371.html
+    https://www.analog.com/en/products/adxl372.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl371
+      - adi,adxl372
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@53 {
+            compatible = "adi,adxl372";
+            reg = <0x53>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@0 {
+            compatible = "adi,adxl372";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl380.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL380/382 3-Axis Digital Accelerometer
+
+maintainers:
+  - Ramona Gradinariu <ramona.gradinariu@analog.com>
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  The ADXL380/ADXL382 and ADXL318/ADXL319 are low noise density,
+  low power, 3-axis accelerometers with selectable measurement ranges.
+  The ADXL380 and ADXL318 support the ±4 g, ±8 g, and ±16 g ranges,
+  while the ADXL382 and ADXL319 support ±15 g, ±30 g, and ±60 g ranges.
+
+  https://www.analog.com/en/products/adxl318.html
+  https://www.analog.com/en/products/adxl380.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl318
+      - adi,adxl319
+      - adi,adxl380
+      - adi,adxl382
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [INT0, INT1]
+      - const: INT1
+
+  vddio-supply: true
+
+  vsupply-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - vddio-supply
+  - vsupply-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@54 {
+        compatible = "adi,adxl380";
+        reg = <0x54>;
+        vddio-supply = <&vddio>;
+        vsupply-supply = <&vsupply>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "INT0";
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@0 {
+        compatible = "adi,adxl380";
+        reg = <0>;
+        spi-max-frequency = <8000000>;
+        vddio-supply = <&vddio>;
+        vsupply-supply = <&vsupply>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "INT0";
+      };
+    };
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma220.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA220 Triaxial Acceleration Sensor
+
+maintainers:
+  - Jonathan Cameron <Jonathan.Cameron@huawei.com>
+
+properties:
+  compatible:
+    enum:
+      - bosch,bma220
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-cpha: true
+  spi-cpol: true
+
+  vdda-supply: true
+  vddd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@0 {
+            compatible = "bosch,bma220";
+            reg = <0>;
+            spi-max-frequency = <2500000>;
+            spi-cpol;
+            spi-cpha;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma255.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA255 and Similar Accelerometers
+
+maintainers:
+  - Linus Walleij <linusw@kernel.org>
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description:
+  3 axis accelerometers with varying range and I2C or SPI
+  4-wire interface.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - bosch,bma222
+          - bosch,bma222e
+          - bosch,bma250e
+          - bosch,bma253
+          - bosch,bma254
+          - bosch,bma255
+          - bosch,bma280
+          - bosch,bmc150_accel
+          - bosch,bmc156_accel
+          - bosch,bmi055_accel
+
+          - bosch,bma023
+          - bosch,bma150
+          - bosch,bma180
+          - bosch,bma250
+          - bosch,smb380
+      - items:
+          - const: bosch,bmx055-accel
+          - const: bosch,bmc150_accel
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Without interrupt-names, the first interrupt listed must be the one
+      connected to the INT1 pin, the second (optional) interrupt listed must be
+      the one connected to the INT2 pin (if available). The type should be
+      IRQ_TYPE_EDGE_RISING.
+
+      BMC156 does not have an INT1 pin, therefore the first interrupt pin is
+      always treated as INT2.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+  spi-max-frequency:
+    maximum: 10000000
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accelerometer@8 {
+            compatible = "bosch,bma222";
+            reg = <0x08>;
+            vddio-supply = <&vddio>;
+            vdd-supply = <&vdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accelerometer@10 {
+            compatible = "bosch,bmc156_accel";
+            reg = <0x10>;
+            vddio-supply = <&vddio>;
+            vdd-supply = <&vdd>;
+            interrupts = <116 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT2";
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@0 {
+            compatible = "bosch,bma222";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+        };
+    };
+...
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA400 triaxial acceleration sensor
+
+maintainers:
+  - Dan Robertson <dan@dlrobertson.com>
+
+description: |
+  Acceleration and temperature iio sensors with an i2c interface
+
+  Specifications about the sensor can be found at:
+    https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA400-DS000.pdf
+
+properties:
+  compatible:
+    enum:
+      - bosch,bma400
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: phandle to the regulator that provides power to the accelerometer
+
+  vddio-supply:
+    description: phandle to the regulator that provides power to the sensor's IO
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      accelerometer@14 {
+        compatible = "bosch,bma400";
+        reg = <0x14>;
+        vdd-supply = <&vdd>;
+        vddio-supply = <&vddio>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI088 IMU accelerometer part
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: |
+  Acceleration part of the IMU sensor with an SPI interface
+  Specifications about the sensor can be found at:
+    https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
+
+properties:
+  compatible:
+    enum:
+      - bosch,bmi085-accel
+      - bosch,bmi088-accel
+      - bosch,bmi090l-accel
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
+      Two configurable interrupt lines exist.
+
+  interrupt-names:
+    description: Specify which interrupt line is in use.
+    items:
+      enum:
+        - INT1
+        - INT2
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      bmi088-accel@1 {
+        compatible = "bosch,bmi088-accel";
+        reg = <1>;
+        spi-max-frequency = <10000000>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "INT2";
+      };
+    };
+...
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/fsl,mma7455.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MMA7455 and MMA7456 three axis accelerometers
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Devices support both SPI and I2C interfaces.
+
+properties:
+  compatible:
+    enum:
+      - fsl,mma7455
+      - fsl,mma7456
+  reg:
+    maxItems: 1
+
+  avdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description:
+      Data ready is only available on INT1, but events can use either or
+      both pins.  If not specified, first element assumed to correspond
+      to INT1 and second (where present) to INT2.
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@18 {
+            compatible = "fsl,mma7455";
+            reg = <0x18>;
+            vddio-supply = <&iovdd>;
+            avdd-supply = <&avdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_FALLING>, <58 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "INT2", "INT1";
+        };
+    };
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accelerometer@0 {
+            compatible = "fsl,mma7456";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            vddio-supply = <&iovdd>;
+            avdd-supply = <&avdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "INT1";
+        };
+    };
+...
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/fsl,mma8452.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC or FXLS8471Q
+  triaxial accelerometer
+
+maintainers:
+  - Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,mma8451
+      - fsl,mma8452
+      - fsl,mma8453
+      - fsl,mma8652
+      - fsl,mma8653
+      - fsl,fxls8471
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      2 highly configurable interrupt lines exist.
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description: Specify which interrupt line is in use.
+    items:
+      enum:
+        - INT1
+        - INT2
+    minItems: 1
+    maxItems: 2
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accel@1d {
+            compatible = "fsl,mma8453";
+            reg = <0x1d>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <5 0>;
+            interrupt-names = "INT2";
+        };
+    };
+...
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM/Kionix KX022A, KX132/134-1211 and KX132/134ACR-LBZ Accelerometers
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  KX022A, KX132ACR-LBZ and KX132-1211 are 3-axis accelerometers supporting
+  +/- 2G, 4G, 8G and 16G ranges. The KX134ACR-LBZ and KX134-1211 support
+  +/- 8G, 16G, 32G and 64G. All the sensors also have variable output
+  data-rates and a hardware-fifo buffering. These accelerometers can be
+  accessed either via I2C or SPI.
+
+properties:
+  compatible:
+    enum:
+      - kionix,kx022a
+      - kionix,kx132-1211
+      - kionix,kx134-1211
+      - rohm,kx132acr-lbz
+      - rohm,kx134acr-lbz
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [INT1, INT2]
+      - const: INT2
+
+  vdd-supply: true
+  io-vdd-supply: true
+
+  mount-matrix:
+    description: |
+      an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@1f {
+            compatible = "kionix,kx022a";
+            reg = <0x1f>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "INT1";
+
+            io-vdd-supply = <&iovdd>;
+            vdd-supply = <&vdd>;
+        };
+    };
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/kionix,kxcjk1013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kionix KXCJK-1013 Accelerometer
+
+maintainers:
+  - Robert Yang <decatf@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - kionix,kxcjk1013
+      - kionix,kxcj91008
+      - kionix,kxtj21009
+      - kionix,kxtf9
+      - kionix,kx022-1020
+      - kionix,kx023-1025
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accel@f {
+            compatible = "kionix,kxtf9";
+            reg = <0xf>;
+            mount-matrix = "0", "1", "0",
+                           "1", "0", "0",
+                           "0", "0", "1";
+        };
+    };
+...
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/kionix,kxsd9.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kionix KXSD9 Accelerometer
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  3 axis 12 bit accelerometer with +-8G range on all axes. Also has a
+  12 bit auxiliary ADC channel. Interface is either SPI or I2C.
+
+properties:
+  compatible:
+    const: kionix,kxsd9
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  iovdd-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accel@18 {
+            compatible = "kionix,kxsd9";
+            reg = <0x18>;
+            iovdd-supply = <&iovdd>;
+            vdd-supply = <&vdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+            mount-matrix = "-0.984807753012208", "0",  "-0.173648177666930",
+                           "0",                  "-1", "0",
+                           "-0.173648177666930", "0",  "0.984807753012208";
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@0 {
+            compatible = "kionix,kxsd9";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+        };
+    };
+...
@@ -0,0 +1,119 @@
+LIS302 accelerometer devicetree bindings
+
+This device is matched via its bus drivers, and has a number of properties
+that apply in on the generic device (independent from the bus).
+
+
+Required properties for the SPI bindings:
+ - compatible: 		should be set to "st,lis3lv02d-spi"
+ - reg:			the chipselect index
+ - spi-max-frequency:	maximal bus speed, should be set to 1000000 unless
+			constrained by external circuitry
+ - interrupts:		the interrupt generated by the device
+
+Required properties for the I2C bindings:
+ - compatible:		should be set to "st,lis3lv02d"
+ - reg:			i2c slave address
+ - Vdd-supply:		The input supply for Vdd
+ - Vdd_IO-supply:	The input supply for Vdd_IO
+
+
+Optional properties for all bus drivers:
+
+ - st,click-single-{x,y,z}:	if present, tells the device to issue an
+				interrupt on single click events on the
+				x/y/z axis.
+ - st,click-double-{x,y,z}:	if present, tells the device to issue an
+				interrupt on double click events on the
+				x/y/z axis.
+ - st,click-thresh-{x,y,z}:	set the x/y/z axis threshold
+ - st,click-click-time-limit:	click time limit, from 0 to 127.5msec
+				with step of 0.5 msec
+ - st,click-latency:		click latency, from 0 to 255 msec with
+				step of 1 msec.
+ - st,click-window:		click window, from 0 to 255 msec with
+				step of 1 msec.
+ - st,irq{1,2}-disable:		disable IRQ 1/2
+ - st,irq{1,2}-ff-wu-1:		raise IRQ 1/2 on FF_WU_1 condition
+ - st,irq{1,2}-ff-wu-2:		raise IRQ 1/2 on FF_WU_2 condition
+ - st,irq{1,2}-data-ready:	raise IRQ 1/2 on data ready condition
+ - st,irq{1,2}-click:		raise IRQ 1/2 on click condition
+ - st,irq-open-drain:		consider IRQ lines open-drain
+ - st,irq-active-low:		make IRQ lines active low
+ - st,wu-duration-1:		duration register for Free-Fall/Wake-Up
+				interrupt 1
+ - st,wu-duration-2:		duration register for Free-Fall/Wake-Up
+				interrupt 2
+ - st,wakeup-{x,y,z}-{lo,hi}:	set wakeup condition on x/y/z axis for
+				upper/lower limit
+ - st,wakeup-threshold:		set wakeup threshold
+ - st,wakeup2-{x,y,z}-{lo,hi}:	set wakeup condition on x/y/z axis for
+				upper/lower limit for second wakeup
+				engine.
+ - st,wakeup2-threshold:	set wakeup threshold for second wakeup
+				engine.
+ - st,highpass-cutoff-hz=:	1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of
+				highpass cut-off frequency
+ - st,hipass{1,2}-disable:	disable highpass 1/2.
+ - st,default-rate=:		set the default rate
+ - st,axis-{x,y,z}=:		set the axis to map to the three coordinates.
+				Negative values can be used for inverted axis.
+ - st,{min,max}-limit-{x,y,z}	set the min/max limits for x/y/z axis
+				(used by self-test)
+
+
+Example for a SPI device node:
+
+	accelerometer@0 {
+		compatible = "st,lis302dl-spi";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio>;
+		interrupts = <104 0>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+	};
+
+Example for a I2C device node:
+
+	lis331dlh: accelerometer@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MEMSensing digital 3-Axis accelerometer
+
+maintainers:
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+description: |
+  MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
+  sensitivity consumer applications. It has dynamical user selectable full
+  scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
+  with output data rates from 1Hz to 1000Hz.
+  Datasheet can be found at following URL
+  https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf
+
+properties:
+  compatible:
+    const: memsensing,msa311
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@62 {
+            compatible = "memsensing,msa311";
+            reg = <0x62>;
+            interrupt-parent = <&gpio_intc>;
+            interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&vcc_5v>;
+        };
+    };
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/murata,sca3300.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Murata SCA3300 Accelerometer
+
+description: |
+  3-axis industrial accelerometer with digital SPI interface
+  https://www.murata.com/en-global/products/sensor/accel/sca3300
+
+maintainers:
+  - Tomas Melin <tomas.melin@vaisala.com>
+
+properties:
+  compatible:
+    enum:
+      - murata,sca3300
+      - murata,scl3300
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 8000000
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accelerometer@0 {
+            compatible = "murata,sca3300";
+            reg = <0x0>;
+            spi-max-frequency = <4000000>;
+        };
+    };
+...
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/nxp,fxls8962af.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP FXLS8962AF/FXLS8964AF Accelerometer driver
+
+maintainers:
+  - Sean Nyekjaer <sean@geanix.com>
+
+description: |
+  NXP FXLS8962AF/FXLS8964AF Accelerometer driver that supports
+  SPI and I2C interface.
+    https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf
+    https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf
+    https://www.nxp.com/docs/en/data-sheet/FXLS8967AF.pdf
+    https://www.nxp.com/docs/en/data-sheet/FXLS8974CF.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nxp,fxls8962af
+          - nxp,fxls8964af
+      - items:
+          - enum:
+              - nxp,fxls8967af
+              - nxp,fxls8974cf
+          - const: nxp,fxls8962af
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: phandle to the regulator that provides power to the accelerometer
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    enum:
+      - INT1
+      - INT2
+
+  drive-open-drain:
+    type: boolean
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable wake on accelerometer event
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@62 {
+            compatible = "nxp,fxls8962af";
+            reg = <0x62>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+            wakeup-source;
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "nxp,fxls8962af";
+            reg = <0>;
+            spi-max-frequency = <4000000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IIO Common Properties for ADC Channels
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  A few properties are defined in a common way ADC channels.
+
+properties:
+  $nodename:
+    pattern: "^channel(@[0-9a-f]+)?$"
+    description:
+      A channel index should match reg.
+
+  reg:
+    maxItems: 1
+
+  label:
+    description: Unique name to identify which channel this is.
+
+  bipolar:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If provided, the channel is to be used in bipolar mode.
+
+  diff-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
+    minItems: 2
+    description:
+      Many ADCs have dual Muxes to allow different input pins to be routed
+      to both the positive and negative inputs of a differential ADC.
+      The first value specifies the positive input pin, the second
+      specifies the negative input pin.
+      There are also some ADCs, where the differential channel has dedicated
+      positive and negative inputs which can be used to measure differential
+      voltage levels. For those setups, this property can be configured with
+      the 'reg' property for both inputs (i.e. diff-channels = <reg reg>).
+
+  single-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When devices combine single-ended and differential channels, allow the
+      channel for a single element to be specified, independent of reg (as for
+      differential channels). If this and diff-channels are not present reg
+      shall be used instead.
+
+  common-mode-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Some ADCs have differential input pins that can be used to measure
+      single-ended or pseudo-differential inputs. This property can be used
+      in addition to single-channel to signal software that this channel is
+      not differential but still specify two inputs.
+
+      The input pair is specified by setting single-channel to the positive
+      input pin and common-mode-channel to the negative pin.
+
+  settling-time-us:
+    description:
+      Time between enabling the channel and first stable readings.
+
+  oversampling-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Oversampling is used as replacement of or addition to the low-pass filter.
+      In some cases, the desired filtering characteristics are a function the
+      device design and can interact with other characteristics such as
+      settling time.
+
+anyOf:
+  - oneOf:
+      - required:
+          - reg
+          - diff-channels
+      - required:
+          - reg
+          - single-channel
+  - required:
+      - reg
+
+additionalProperties: true
@@ -0,0 +1,246 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4000 and similar Analog to Digital Converters
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+
+description: |
+  Analog Devices AD4000 family of Analog to Digital Converters with SPI support.
+  Specifications can be found at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4000-4004-4008.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4001-4005.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4002-4006-4010.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4003-4007-4011.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7685.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7686.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7687.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7688.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7690.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7691.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7693.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7942.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7946.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7980.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7982.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7983.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7984.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7988-1_7988-5.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - adi,ad4000
+          - adi,ad4001
+          - adi,ad4002
+          - adi,ad4003
+          - adi,ad4020
+          - adi,adaq4001
+          - adi,adaq4003
+          - adi,ad7687
+          - adi,ad7691
+          - adi,ad7942
+          - adi,ad7946
+          - adi,ad7983
+      - items:
+          - enum:
+              - adi,ad4004
+              - adi,ad4008
+          - const: adi,ad4000
+      - items:
+          - enum:
+              - adi,ad4005
+          - const: adi,ad4001
+      - items:
+          - enum:
+              - adi,ad4006
+              - adi,ad4010
+          - const: adi,ad4002
+      - items:
+          - enum:
+              - adi,ad4007
+              - adi,ad4011
+          - const: adi,ad4003
+      - items:
+          - enum:
+              - adi,ad4021
+              - adi,ad4022
+          - const: adi,ad4020
+      - items:
+          - enum:
+              - adi,ad7685
+              - adi,ad7686
+              - adi,ad7980
+              - adi,ad7988-1
+              - adi,ad7988-5
+          - const: adi,ad7983
+      - items:
+          - enum:
+              - adi,ad7688
+              - adi,ad7693
+          - const: adi,ad7687
+      - items:
+          - enum:
+              - adi,ad7690
+              - adi,ad7982
+              - adi,ad7984
+          - const: adi,ad7691
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 102040816 # for VIO > 2.7 V, 81300813 for VIO > 1.7 V
+
+  adi,sdi-pin:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ high, low, cs, sdi ]
+    default: sdi
+    description:
+      Describes how the ADC SDI pin is wired. A value of "sdi" indicates that
+      the ADC SDI is connected to host SDO. "high" indicates that the ADC SDI
+      pin is hard-wired to logic high (VIO). "low" indicates that it is
+      hard-wired low (GND). "cs" indicates that the ADC SDI pin is connected to
+      the host CS line.
+
+  '#daisy-chained-devices': true
+
+  vdd-supply:
+    description: A 1.8V supply that powers the chip (VDD).
+
+  vio-supply:
+    description:
+      A 1.8V to 5.5V supply for the digital inputs and outputs (VIO).
+
+  ref-supply:
+    description:
+      A 2.5 to 5V supply for the external reference voltage (REF).
+
+  cnv-gpios:
+    description:
+      When provided, this property indicates the GPIO that is connected to the
+      CNV pin.
+    maxItems: 1
+
+  adi,high-z-input:
+    type: boolean
+    description:
+      High-Z mode allows the amplifier and RC filter in front of the ADC to be
+      chosen based on the signal bandwidth of interest, rather than the settling
+      requirements of the switched capacitor SAR ADC inputs.
+
+  adi,gain-milli:
+    description: |
+      The hardware gain applied to the ADC input (in milli units).
+      The gain provided by the ADC input scaler is defined by the hardware
+      connections between chip pins OUT+, R1K-, R1K1-, R1K+, R1K1+, and OUT-.
+      If not present, default to 1000 (no actual gain applied).
+    $ref: /schemas/types.yaml#/definitions/uint16
+    enum: [454, 909, 1000, 1900]
+    default: 1000
+
+  interrupts:
+    description:
+      The SDO pin can also function as a busy indicator. This node should be
+      connected to an interrupt that is triggered when the SDO line goes low
+      while the SDI line is high and the CNV line is low ("3-wire" mode) or the
+      SDI line is low and the CNV line is high ("4-wire" mode); or when the SDO
+      line goes high while the SDI and CNV lines are high (chain mode),
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vio-supply
+  - ref-supply
+
+allOf:
+  # Single-channel PulSAR devices have SDI either tied to VIO, GND, or host CS.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7687
+              - adi,ad7691
+              - adi,ad7942
+              - adi,ad7946
+              - adi,ad7983
+    then:
+      properties:
+        adi,sdi-pin:
+          enum: [ high, low, cs ]
+          default: cs
+  # The configuration register can only be accessed if SDI is connected to MOSI
+  - if:
+      required:
+        - adi,sdi-pin
+    then:
+      properties:
+        adi,high-z-input: false
+  # chain mode has lower SCLK max rate
+  - if:
+      required:
+        - '#daisy-chained-devices'
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 50000000 # for VIO > 2.7 V, 40000000 for VIO > 1.7 V
+  # Gain property only applies to ADAQ devices
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - adi,adaq4001
+                - adi,adaq4003
+    then:
+      properties:
+        adi,gain-milli: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "adi,ad4020";
+            reg = <0>;
+            spi-max-frequency = <71000000>;
+            vdd-supply = <&supply_1_8V>;
+            vio-supply = <&supply_1_8V>;
+            ref-supply = <&supply_5V>;
+            adi,sdi-pin = "cs";
+            cnv-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "adi,adaq4003";
+            reg = <0>;
+            spi-max-frequency = <80000000>;
+            vdd-supply = <&supply_1_8V>;
+            vio-supply = <&supply_1_8V>;
+            ref-supply = <&supply_5V>;
+            adi,high-z-input;
+            adi,gain-milli = /bits/ 16 <454>;
+        };
+    };
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+# Copyright 2024 BayLibre, SAS.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4030.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4030 and AD4630 ADC families
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+  Analog Devices AD4030 single channel and AD4630/AD4632 dual channel precision
+  SAR ADC families
+
+  * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4030-24-4032-24.pdf
+  * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4630-24_ad4632-24.pdf
+  * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4630-16-4632-16.pdf
+  * https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4216.pdf
+  * https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4224.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4030-24
+      - adi,ad4032-24
+      - adi,ad4630-16
+      - adi,ad4630-24
+      - adi,ad4632-16
+      - adi,ad4632-24
+      - adi,adaq4216
+      - adi,adaq4224
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 102040816
+
+  spi-rx-bus-width:
+    maxItems: 2
+    # all lanes must have the same width
+    oneOf:
+      - contains:
+          const: 1
+      - contains:
+          const: 2
+      - contains:
+          const: 4
+
+  vdd-5v-supply: true
+  vdd-1v8-supply: true
+  vio-supply: true
+
+  ref-supply:
+    description:
+      Optional External unbuffered reference. Used when refin-supply is not
+      connected.
+
+  refin-supply:
+    description:
+      Internal buffered Reference. Used when ref-supply is not connected.
+
+  vddh-supply:
+    description:
+      PGIA Positive Power Supply.
+
+  vdd-fda-supply:
+    description:
+      FDA Positive Power Supply.
+
+  cnv-gpios:
+    description:
+      The Convert Input (CNV). It initiates the sampling conversions.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      The Reset Input (/RST). Used for asynchronous device reset.
+    maxItems: 1
+
+  pga-gpios:
+    description:
+      A0 and A1 pins for gain selection. For devices that have PGA configuration
+      input pins, pga-gpios should be defined.
+    minItems: 2
+    maxItems: 2
+
+  pwms:
+    description: PWM signal connected to the CNV pin.
+    maxItems: 1
+
+  interrupts:
+    description:
+      The BUSY pin is used to signal that the conversions results are available
+      to be transferred when in SPI Clocking Mode. This nodes should be
+      connected to an interrupt that is triggered when the BUSY line goes low.
+    maxItems: 1
+
+  interrupt-names:
+    const: busy
+
+required:
+  - compatible
+  - reg
+  - vdd-5v-supply
+  - vdd-1v8-supply
+  - vio-supply
+  - cnv-gpios
+
+oneOf:
+  - required:
+      - ref-supply
+  - required:
+      - refin-supply
+
+unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad4030-24
+            - adi,ad4032-24
+    then:
+      properties:
+        spi-rx-bus-width:
+          maxItems: 1
+  # ADAQ devices require a gain property to indicate how hardware PGA is set
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: ^adi,adaq
+    then:
+      required:
+        - vddh-supply
+        - vdd-fda-supply
+        - pga-gpios
+      properties:
+        ref-supply: false
+    else:
+      properties:
+        pga-gpios: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad4030-24";
+            reg = <0>;
+            spi-max-frequency = <80000000>;
+            vdd-5v-supply = <&supply_5V>;
+            vdd-1v8-supply = <&supply_1_8V>;
+            vio-supply = <&supply_1_8V>;
+            ref-supply = <&supply_5V>;
+            cnv-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad4630-24";
+            reg = <0>;
+            spi-max-frequency = <80000000>;
+            spi-rx-bus-width = <4>, <4>;
+            vdd-5v-supply = <&supply_5V>;
+            vdd-1v8-supply = <&supply_1_8V>;
+            vio-supply = <&supply_1_8V>;
+            ref-supply = <&supply_5V>;
+            cnv-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,adaq4216";
+            reg = <0>;
+            spi-max-frequency = <80000000>;
+            vdd-5v-supply = <&supply_5V>;
+            vdd-1v8-supply = <&supply_1_8V>;
+            vio-supply = <&supply_1_8V>;
+            refin-supply = <&refin_sup>;
+            vddh-supply = <&vddh>;
+            vdd-fda-supply = <&vdd_fda>;
+            cnv-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+            pga-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>,
+                        <&gpio0 3 GPIO_ACTIVE_HIGH>;
+        };
+    };
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4062.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4062 ADC family device driver
+
+maintainers:
+  - Jorge Marques <jorge.marques@analog.com>
+
+description: |
+  Analog Devices AD4062 Single Channel Precision SAR ADC family
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4060.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4062.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4060
+      - adi,ad4062
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Two pins are available that can be configured as either a general purpose
+      digital output, device enable signal (used to synchronise other parts of
+      the signal chain with ADC sampling), device ready (GP1 only) or various
+      interrupt signals. If intended for use as a GPIO or device enable, will not
+      present here.
+    minItems: 1
+    items:
+      - description:
+          GP0 pin, cannot be configured as DEV_RDY.
+      - description:
+          GP1 pin, can be configured to any setting.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: gp0
+      - const: gp1
+
+  gpio-controller:
+    description:
+      Marks the device node as a GPIO controller. GPs not listed as interrupts
+      are exposed as a GPO.
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell is the GPIO number and the second cell specifies
+      GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+
+  vdd-supply:
+    description: Analog power supply.
+
+  vio-supply:
+    description: Digital interface logic power supply.
+
+  ref-supply:
+    description:
+      Reference voltage to set the ADC full-scale range. If not present,
+      vdd-supply is used as the reference voltage.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vio-supply
+
+allOf:
+  - $ref: /schemas/i3c/i3c.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i3c {
+        #address-cells = <3>;
+        #size-cells = <0>;
+
+        adc@0,2ee007c0000 {
+            reg = <0x0 0x2ee 0x7c0000>;
+            vdd-supply = <&vdd>;
+            vio-supply = <&vio>;
+            ref-supply = <&ref>;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <0 0 IRQ_TYPE_EDGE_RISING>,
+                         <0 1 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "gp0", "gp1";
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i3c {
+        #address-cells = <3>;
+        #size-cells = <0>;
+
+        adc@0,2ee007c0000 {
+            reg = <0x0 0x2ee 0x7c0000>;
+            vdd-supply = <&vdd>;
+            vio-supply = <&vio>;
+            ref-supply = <&ref>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4080.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4080 20-Bit, 40 MSPS, Differential SAR ADC
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  The AD4080 is a high speed, low noise, low distortion, 20-bit, Easy Drive,
+  successive approximation register (SAR) analog-to-digital converter (ADC).
+  Maintaining high performance (signal-to-noise and distortion (SINAD) ratio
+  > 90 dBFS) at signal frequencies in excess of 1 MHz enables the AD4080 to
+  service a wide variety of precision, wide bandwidth data acquisition
+  applications.
+
+  The AD4880 is a dual-channel variant with two independent ADC channels,
+  each with its own SPI configuration interface.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4080.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4880.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4080
+      - adi,ad4081
+      - adi,ad4082
+      - adi,ad4083
+      - adi,ad4084
+      - adi,ad4085
+      - adi,ad4086
+      - adi,ad4087
+      - adi,ad4088
+      - adi,ad4880
+      - adi,ad4884
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description:
+      SPI chip select(s). For single-channel devices, one chip select.
+      For multi-channel devices like AD4880, two chip selects are required
+      as each channel has its own SPI configuration interface.
+
+  spi-max-frequency:
+    description: Configuration of the SPI bus.
+    maximum: 50000000
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cnv
+
+  vdd33-supply: true
+
+  vdd11-supply: true
+
+  vddldo-supply: true
+
+  iovdd-supply: true
+
+  vrefin-supply: true
+
+  io-backends:
+    minItems: 1
+    items:
+      - description: Backend for channel A (primary)
+      - description: Backend for channel B (secondary)
+
+  adi,lvds-cnv-enable:
+    description: Enable the LVDS signal type on the CNV pin. Default is CMOS.
+    type: boolean
+
+  adi,num-lanes:
+    description:
+      Number of lanes on which the data is sent on the output (DA, DB pins).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    default: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vdd33-supply
+  - vrefin-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad4880
+              - adi,ad4884
+    then:
+      properties:
+        reg:
+          minItems: 2
+        io-backends:
+          minItems: 2
+    else:
+      properties:
+        reg:
+          maxItems: 1
+        io-backends:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad4080";
+          reg = <0>;
+          spi-max-frequency = <10000000>;
+          vdd33-supply = <&vdd33>;
+          vddldo-supply = <&vddldo>;
+          vrefin-supply = <&vrefin>;
+          clocks = <&cnv>;
+          clock-names = "cnv";
+          io-backends = <&iio_backend>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad4880";
+          reg = <0>, <1>;
+          spi-max-frequency = <10000000>;
+          vdd33-supply = <&vdd33>;
+          vddldo-supply = <&vddldo>;
+          vrefin-supply = <&vrefin>;
+          clocks = <&cnv>;
+          clock-names = "cnv";
+          io-backends = <&iio_backend_cha>, <&iio_backend_chb>;
+        };
+    };
+...
@@ -0,0 +1,277 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4130.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4130 family ADCs
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD4130 family ADCs.
+  Datasheets can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4129-4.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4129-8.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4130-4.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4130-8.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4131-4.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4131-8.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4129-4
+      - adi,ad4129-8
+      - adi,ad4130-4
+      - adi,ad4130
+      - adi,ad4131-4
+      - adi,ad4131-8
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: phandle to the master clock (mclk)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Data Ready / FIFO interrupt. For devices with FIFO support, the
+      interrupt polarity specified here is inverted when the device enters
+      FIFO mode, and normal for data ready.
+
+  interrupt-names:
+    description: |
+      Specify which interrupt pin should be configured as Data Ready / FIFO
+      interrupt.
+      Default if not supplied is int.
+    enum:
+      - int
+      - clk
+      - p2
+      - dout
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  refin1-supply:
+    description: refin1 supply. Can be used as reference for conversion.
+
+  refin2-supply:
+    description: refin2 supply. Can be used as reference for conversion.
+
+  avdd-supply:
+    description: AVDD voltage supply. Can be used as reference for conversion.
+
+  iovdd-supply:
+    description: IOVDD voltage supply. Used for the chip interface.
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  adi,ext-clk-freq-hz:
+    description: Specify the frequency of the external clock.
+    enum: [76800, 153600]
+    default: 76800
+
+  adi,bipolar:
+    description: Specify if the device should be used in bipolar mode.
+    type: boolean
+
+  adi,vbias-pins:
+    description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 15
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+patternProperties:
+  "^channel@([0-9a-f])$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: The channel number.
+        minimum: 0
+        maximum: 15
+
+      diff-channels:
+        description: |
+          Besides the analog inputs available, internal inputs can be used.
+          16: Internal temperature sensor.
+          17: AVSS
+          18: Internal reference
+          19: DGND
+          20: (AVDD − AVSS)/6+
+          21: (AVDD − AVSS)/6-
+          22: (IOVDD − DGND)/6+
+          23: (IOVDD − DGND)/6-
+          24: (ALDO − AVSS)/6+
+          25: (ALDO − AVSS)/6-
+          26: (DLDO − DGND)/6+
+          27: (DLDO − DGND)/6-
+          28: V_MV_P
+          29: V_MV_M
+        items:
+          minimum: 0
+          maximum: 29
+
+      adi,reference-select:
+        description: |
+          Select the reference source to use when converting on the
+          specific channel. Valid values are:
+          0: REFIN1(+)/REFIN1(−)
+          1: REFIN2(+)/REFIN2(−)
+          2: REFOUT/AVSS (Internal reference)
+          3: AVDD/AVSS
+          If not specified, REFIN1 is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+
+      adi,excitation-pin-0:
+        description: |
+          Analog input to apply excitation current to while the channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      adi,excitation-pin-1:
+        description: |
+          Analog input to apply excitation current to while this channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      adi,excitation-current-0-nanoamp:
+        description: |
+          Excitation current in nanoamps to be applied to pin specified in
+          adi,excitation-pin-0 while this channel is active.
+        enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
+        default: 0
+
+      adi,excitation-current-1-nanoamp:
+        description: |
+          Excitation current in nanoamps to be applied to pin specified in
+          adi,excitation-pin-1 while this channel is active.
+        enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
+        default: 0
+
+      adi,burnout-current-nanoamp:
+        description: |
+          Burnout current in nanoamps to be applied for this channel.
+        enum: [0, 500, 2000, 4000]
+        default: 0
+
+      adi,buffered-positive:
+        description: Enable buffered mode for positive input.
+        type: boolean
+
+      adi,buffered-negative:
+        description: Enable buffered mode for negative input.
+        type: boolean
+
+    required:
+      - reg
+      - diff-channels
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad4130";
+        reg = <0>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        spi-max-frequency = <5000000>;
+        interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-parent = <&gpio>;
+
+        channel@0 {
+          reg = <0>;
+
+          adi,reference-select = <2>;
+
+          /* AIN8, AIN9 */
+          diff-channels = <8 9>;
+        };
+
+        channel@1 {
+          reg = <1>;
+
+          adi,reference-select = <2>;
+
+          /* AIN10, AIN11 */
+          diff-channels = <10 11>;
+        };
+
+        channel@2 {
+          reg = <2>;
+
+          adi,reference-select = <2>;
+
+          /* Temperature Sensor, DGND */
+          diff-channels = <16 19>;
+        };
+
+        channel@3 {
+          reg = <3>;
+
+          adi,reference-select = <2>;
+
+          /* Internal reference, DGND */
+          diff-channels = <18 19>;
+        };
+
+        channel@4 {
+          reg = <4>;
+
+          adi,reference-select = <2>;
+
+          /* DGND, DGND */
+          diff-channels = <19 19>;
+        };
+      };
+    };
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4134.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4134 ADC
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+
+description: |
+  The AD4134 is a quad channel, low noise, simultaneous sampling, precision
+  analog-to-digital converter (ADC).
+  Specifications can be found at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4134.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4134
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 50000000
+
+  avdd5-supply:
+    description: A 5V supply that powers the chip's analog circuitry.
+
+  dvdd5-supply:
+    description: A 5V supply that powers the chip's digital circuitry.
+
+  iovdd-supply:
+    description:
+      A 1.8V supply that sets the logic levels for the digital interface pins.
+
+  refin-supply:
+    description:
+      A 4.096V or 5V supply that serves as reference for ADC conversions.
+
+  avdd1v8-supply:
+    description: A 1.8V supply used by the analog circuitry.
+
+  dvdd1v8-supply:
+    description: A 1.8V supply used by the digital circuitry.
+
+  clkvdd-supply:
+    description: A 1.8V supply for the chip's clock management circuit.
+
+  ldoin-supply:
+    description:
+      A 2.6V to 5.5V supply that generates 1.8V for AVDD1V8, DVDD1V8, and CLKVDD
+      pins.
+
+  clocks:
+    maxItems: 1
+    description:
+      Required external clock source. Can specify either a crystal or CMOS clock
+      source. If an external crystal is set, connect the CLKSEL pin to IOVDD.
+      Otherwise, connect the CLKSEL pin to IOGND and the external CMOS clock
+      signal to the XTAL2/CLKIN pin.
+
+  clock-names:
+    enum:
+      - xtal
+      - clkin
+    default: clkin
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      list of regulators provided by this controller.
+
+    properties:
+      vcm-output:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+  reset-gpios:
+    maxItems: 1
+
+  powerdown-gpios:
+    description:
+      Active low GPIO connected to the /PDN pin. Forces the device into full
+      power-down mode when brought low. Pull this input to IOVDD for normal
+      operation.
+    maxItems: 1
+
+  odr-gpios:
+    description:
+      GPIO connected to ODR pin. Used to sample ADC data in minimum I/O mode.
+    maxItems: 1
+
+  adi,asrc-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Asynchronous Sample Rate Converter (ASRC) operation mode control input.
+      Describes whether the MODE pin is set to a high level (for master mode
+      operation) or to a low level (for slave mode operation).
+    enum: [ high, low ]
+    default: low
+
+  adi,dclkio:
+    description:
+      DCLK pin I/O direction control for when the device operates in Pin Control
+      Slave Mode or in SPI Control Mode. Describes if DEC0/DCLKIO pin is at a
+      high level (which configures DCLK as an output) or to set to a low level
+      (configuring DCLK for input).
+    enum: [ out, in ]
+    default: in
+
+  adi,dclkmode:
+    description:
+      DCLK mode control for when the device operates in Pin Control Slave Mode
+      or in SPI Control Mode. Describes whether the DEC1/DCLKMODE pin is set to
+      a high level (configuring the DCLK to operate in free running mode) or
+      to a low level (to configure DCLK to operate in gated mode).
+    enum: [ free-running, gated ]
+    default: gated
+
+required:
+  - compatible
+  - reg
+  - avdd5-supply
+  - dvdd5-supply
+  - iovdd-supply
+  - refin-supply
+  - clocks
+  - clock-names
+
+oneOf:
+  - required:
+      - ldoin-supply
+  - required:
+      - avdd1v8-supply
+      - dvdd1v8-supply
+      - clkvdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad4134";
+            reg = <0>;
+
+            spi-max-frequency = <1000000>;
+
+            reset-gpios = <&gpio0 86 GPIO_ACTIVE_LOW>;
+            odr-gpios = <&gpio0 87 GPIO_ACTIVE_HIGH>;
+            powerdown-gpios = <&gpio0 88 GPIO_ACTIVE_LOW>;
+
+            clocks = <&sys_clk>;
+            clock-names = "clkin";
+
+            avdd5-supply = <&avdd5>;
+            dvdd5-supply = <&dvdd5>;
+            iovdd-supply = <&iovdd>;
+            refin-supply = <&refin>;
+            avdd1v8-supply = <&avdd1v8>;
+            dvdd1v8-supply = <&dvdd1v8>;
+            clkvdd-supply = <&clkvdd>;
+
+            regulators {
+                vcm_reg: vcm-output {
+                    regulator-name = "ad4134-vcm";
+                };
+            };
+
+        };
+    };
+...
@@ -0,0 +1,554 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4170-4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4170-4 and similar Analog to Digital Converters
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+
+description: |
+  Analog Devices AD4170-4 series of Sigma-delta Analog to Digital Converters.
+  Specifications can be found at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4170-4.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4190-4.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4195-4.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+$defs:
+  reference-buffer:
+    description: |
+      Enable precharge buffer, full buffer, or skip reference buffering of
+      the positive/negative voltage reference. Because the output impedance
+      of the source driving the voltage reference inputs may be dynamic,
+      resistive/capacitive combinations of those inputs can cause DC gain
+      errors if the reference inputs go unbuffered into the ADC. Enable
+      reference buffering if the provided reference source has dynamic high
+      impedance output. Note the absolute voltage allowed on REFINn+ and REFINn-
+      inputs is from AVSS - 50 mV to AVDD + 50 mV when the reference buffers are
+      disabled but narrows to AVSS to AVDD when reference buffering is enabled
+      or in precharge mode.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ precharge, full, disabled ]
+    default: full
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4170-4
+      - adi,ad4190-4
+      - adi,ad4195-4
+
+  avss-supply:
+    description:
+      Reference voltage supply for AVSS. A −2.625V minimum and 0V maximum supply
+      that powers the chip. If not provided, AVSS is assumed to be at system
+      ground (0V).
+
+  avdd-supply:
+    description:
+      A supply of 4.75V to 5.25V relative to AVSS that powers the chip (AVDD).
+
+  iovdd-supply:
+    description: 1.7V to 5.25V reference supply to the serial interface (IOVDD).
+
+  refin1p-supply:
+    description: REFIN+ supply that can be used as reference for conversion.
+
+  refin1n-supply:
+    description: REFIN- supply that can be used as reference for conversion.
+
+  refin2p-supply:
+    description: REFIN2+ supply that can be used as reference for conversion.
+
+  refin2n-supply:
+    description: REFIN2- supply that can be used as reference for conversion.
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  interrupts:
+    description:
+      Interrupt for signaling the completion of conversion results. The data
+      ready signal (RDY) used as interrupt is by default provided on the SDO
+      pin. Alternatively, it can be provided on the DIG_AUX1 pin in which case
+      the chip disables the RDY function on SDO. Thus, there can be only one
+      data ready interrupt enabled at a time.
+
+  interrupt-names:
+    description:
+      Specify which pin should be configured as Data Ready interrupt.
+    enum:
+      - sdo
+      - dig_aux1
+
+  clocks:
+    maxItems: 1
+    description:
+      Optional external clock source. Can specify either an external clock or
+      external crystal.
+
+  clock-names:
+    enum:
+      - ext-clk
+      - xtal
+    default: ext-clk
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      The first cell is for the GPIO number: 0 to 3.
+      The second cell takes standard GPIO flags.
+
+  ldac-gpios:
+    description:
+      GPIO connected to DIG_AUX2 pin to be used as LDAC toggle to control the
+      transfer of data from the DAC_INPUT_A register to the DAC.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  adi,vbias-pins:
+    description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 9
+    items:
+      minimum: 0
+      maximum: 8
+
+allOf:
+  # Some devices don't have integrated DAC
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad4190-4
+              - adi,ad4195-4
+    then:
+      properties:
+        ldac-gpios: false
+
+  # Require to specify the interrupt pin when using interrupts
+  - if:
+      required:
+        - interrupts
+    then:
+      required:
+        - interrupt-names
+
+  # If an external clock is set, the internal clock cannot go out and vice versa
+  - oneOf:
+      - required: [clocks]
+        properties:
+          '#clock-cells': false
+      - required: ['#clock-cells']
+        properties:
+          clocks: false
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - iovdd-supply
+  - spi-cpol
+  - spi-cpha
+
+unevaluatedProperties: false
+
+patternProperties:
+  "^channel@[0-9a-f]$":
+    $ref: /schemas/iio/adc/adc.yaml#
+    unevaluatedProperties: false
+    description:
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description:
+          The channel number.
+        minimum: 0
+        maximum: 15
+
+      diff-channels:
+        description: |
+          This property is used for defining the inputs of a differential
+          voltage channel. The first value is the positive input and the second
+          value is the negative input of the channel.
+
+          Besides the analog input pins AIN0 to AIN8, there are special inputs
+          that can be selected with the following values:
+          17: Internal temperature sensor
+          18: (AVDD-AVSS)/5
+          19: (IOVDD-DGND)/5
+          20: DAC output
+          21: ALDO
+          22: DLDO
+          23: AVSS
+          24: DGND
+          25: REFIN+
+          26: REFIN-
+          27: REFIN2+
+          28: REFIN2-
+          29: REFOUT
+          For the internal temperature sensor, use the input number for both
+          inputs (i.e. diff-channels = <17 17>).
+        items:
+          enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 17, 18, 19, 20, 21, 22, 23, 24, 25,
+                 26, 27, 28, 29]
+
+      adi,reference-select:
+        description: |
+          Select the reference source to use when converting on the
+          specific channel. Valid values are:
+          0: REFIN+/REFIN-
+          1: REFIN2+/REFIN2−
+          2: REFOUT/AVSS (internal reference)
+          3: AVDD/AVSS
+          If not specified, REFOUT/AVSS is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
+
+      adi,positive-reference-buffer:
+        $ref: '#/$defs/reference-buffer'
+
+      adi,negative-reference-buffer:
+        $ref: '#/$defs/reference-buffer'
+
+      adi,sensor-type:
+        description:
+          The AD4170-4 and similar designs have features to aid interfacing with
+          load cell weigh scale, RTD, and thermocouple sensors. Each of those
+          sensor types requires either distinct wiring configuration or
+          external circuitry for proper sensor operation and can use different
+          ADC chip functionality on their setups. A key characteristic of those
+          external sensors is that they must be excited either by voltage supply
+          or by ADC chip excitation signals. The sensor can then be read through
+          a pair of analog inputs. This property specifies which particular
+          sensor type is connected to the ADC so it can be properly setup and
+          handled. Omit this property for conventional (not weigh scale, RTD, or
+          thermocouple) ADC channel setups.
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [ weighscale, rtd, thermocouple ]
+
+      adi,excitation-pin-0:
+        description:
+          Analog input to apply excitation current to while the channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 20
+        default: 0
+
+      adi,excitation-pin-1:
+        description:
+          Analog input to apply excitation current to while the channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 20
+        default: 0
+
+      adi,excitation-pin-2:
+        description:
+          Analog input to apply excitation current to while the channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 20
+        default: 0
+
+      adi,excitation-pin-3:
+        description:
+          Analog input to apply excitation current to while the channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 20
+        default: 0
+
+      adi,excitation-current-0-microamp:
+        description:
+          Excitation current in microamperes to be applied to pin specified in
+          adi,excitation-pin-0 while this channel is active.
+        enum: [0, 10, 50, 100, 250, 500, 1000, 1500]
+        default: 0
+
+      adi,excitation-current-1-microamp:
+        description:
+          Excitation current in microamperes to be applied to pin specified in
+          adi,excitation-pin-1 while this channel is active.
+        enum: [0, 10, 50, 100, 250, 500, 1000, 1500]
+        default: 0
+
+      adi,excitation-current-2-microamp:
+        description:
+          Excitation current in microamperes to be applied to pin specified in
+          adi,excitation-pin-2 while this channel is active.
+        enum: [0, 10, 50, 100, 250, 500, 1000, 1500]
+        default: 0
+
+      adi,excitation-current-3-microamp:
+        description:
+          Excitation current in microamperes to be applied to pin specified in
+          adi,excitation-pin-3 while this channel is active.
+        enum: [0, 10, 50, 100, 250, 500, 1000, 1500]
+        default: 0
+
+      adi,excitation-ac:
+        type: boolean
+        description:
+          Whether the external sensor has to be AC or DC excited. When omitted,
+          it is DC excited.
+
+    allOf:
+      - oneOf:
+          - required: [single-channel, common-mode-channel]
+            properties:
+              diff-channels: false
+          - required: [diff-channels]
+            properties:
+              single-channel: false
+              common-mode-channel: false
+      # Usual ADC channels don't need external circuitry excitation.
+      - if:
+          not:
+            required:
+              - adi,sensor-type
+        then:
+          properties:
+            adi,excitation-pin-0: false
+            adi,excitation-pin-1: false
+            adi,excitation-pin-2: false
+            adi,excitation-pin-3: false
+            adi,excitation-current-0-microamp: false
+            adi,excitation-current-1-microamp: false
+            adi,excitation-current-2-microamp: false
+            adi,excitation-current-3-microamp: false
+            adi,excitation-ac: false
+      # Weigh scale bridge AC excited with one pair of predefined signals.
+      - if:
+          allOf:
+            - properties:
+                adi,sensor-type:
+                  contains:
+                    const: weighscale
+            - required:
+                - adi,excitation-ac
+                - adi,excitation-pin-2
+                - adi,excitation-pin-3
+            - not:
+                required:
+                  - adi,excitation-current-2-microamp
+                  - adi,excitation-current-3-microamp
+        then:
+          properties:
+            adi,excitation-pin-2:
+              const: 19
+            adi,excitation-pin-3:
+              const: 20
+      # Weigh scale bridge AC excited with two pairs of predefined signals.
+      - if:
+          allOf:
+            - properties:
+                adi,sensor-type:
+                  contains:
+                    const: weighscale
+            - required:
+                - adi,excitation-ac
+                - adi,excitation-pin-0
+                - adi,excitation-pin-1
+                - adi,excitation-pin-2
+                - adi,excitation-pin-3
+            - not:
+                required:
+                  - adi,excitation-current-0-microamp
+                  - adi,excitation-current-1-microamp
+                  - adi,excitation-current-2-microamp
+                  - adi,excitation-current-3-microamp
+        then:
+          properties:
+            adi,excitation-pin-0:
+              const: 17
+            adi,excitation-pin-1:
+              const: 18
+            adi,excitation-pin-2:
+              const: 19
+            adi,excitation-pin-3:
+              const: 20
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad4170-4";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            spi-cpol;
+            spi-cpha;
+            avdd-supply = <&avdd>;
+            iovdd-supply = <&iovdd>;
+            clocks = <&clk>;
+            clock-names = "xtal";
+            interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "dig_aux1";
+            adi,vbias-pins = <8>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            // Sample AIN0 with respect to DGND throughout AVDD/DGND input range
+            // Pseudo-differential unipolar
+            channel@0 {
+                reg = <0>;
+                single-channel = <0>;
+                common-mode-channel = <24>;
+                adi,reference-select = <3>;
+            };
+            // Weigh scale sensor
+            channel@1 {
+                reg = <1>;
+                bipolar;
+                diff-channels = <1 2>;
+                adi,reference-select = <0>;
+                adi,positive-reference-buffer = "precharge";
+                adi,negative-reference-buffer = "precharge";
+                adi,sensor-type = "weighscale";
+                adi,excitation-pin-2 = <19>;
+                adi,excitation-pin-3 = <20>;
+                adi,excitation-ac;
+            };
+            // RTD sensor
+            channel@2 {
+                reg = <2>;
+                bipolar;
+                diff-channels = <3 4>;
+                adi,reference-select = <0>;
+                adi,sensor-type = "rtd";
+                adi,excitation-pin-0 = <5>;
+                adi,excitation-pin-1 = <6>;
+                adi,excitation-current-0-microamp = <500>;
+                adi,excitation-current-1-microamp = <500>;
+                adi,excitation-ac;
+            };
+            // Thermocouple sensor
+            channel@3 {
+                reg = <3>;
+                bipolar;
+                diff-channels = <7 8>;
+                adi,reference-select = <0>;
+                adi,sensor-type = "thermocouple";
+                adi,excitation-pin-0 = <18>;
+                adi,excitation-current-0-microamp = <500>;
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad4170-4";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            spi-cpol;
+            spi-cpha;
+            avdd-supply = <&avdd>;
+            iovdd-supply = <&iovdd>;
+            #clock-cells = <0>;
+            clock-output-names = "ad4170-clk16mhz";
+            interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "dig_aux1";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            // Sample AIN0 with respect to AIN1 throughout AVDD/AVSS input range
+            // Differential bipolar. If AVSS < 0V, differential true bipolar
+            channel@0 {
+                reg = <0>;
+                bipolar;
+                diff-channels = <0 1>;
+                adi,reference-select = <3>;
+            };
+            // Sample AIN2 with respect to DGND throughout AVDD/DGND input range
+            // Pseudo-differential unipolar
+            channel@1 {
+                reg = <1>;
+                single-channel = <2>;
+                common-mode-channel = <24>;
+                adi,reference-select = <3>;
+            };
+            // Sample AIN3 with respect to 2.5V throughout AVDD/AVSS input range
+            // Pseudo-differential bipolar
+            channel@2 {
+                reg = <2>;
+                bipolar;
+                single-channel = <3>;
+                common-mode-channel = <29>;
+                adi,reference-select = <3>;
+            };
+            // Sample AIN4 with respect to DGND throughout AVDD/AVSS input range
+            // Pseudo-differential bipolar
+            channel@3 {
+                reg = <3>;
+                bipolar;
+                single-channel = <4>;
+                common-mode-channel = <24>;
+                adi,reference-select = <3>;
+            };
+            // Sample AIN5 with respect to 2.5V throughout AVDD/AVSS input range
+            // Pseudo-differential unipolar (AD4170-4 datasheet page 46 example)
+            channel@4 {
+                reg = <4>;
+                single-channel = <5>;
+                common-mode-channel = <29>;
+                adi,reference-select = <3>;
+            };
+            // Sample AIN6 with respect to 2.5V throughout REFIN+/REFIN- input range
+            // Pseudo-differential bipolar
+            channel@5 {
+                reg = <5>;
+                bipolar;
+                single-channel = <6>;
+                common-mode-channel = <29>;
+                adi,reference-select = <0>;
+            };
+            // Weigh scale sensor
+            channel@6 {
+                reg = <6>;
+                bipolar;
+                diff-channels = <7 8>;
+                adi,reference-select = <0>;
+                adi,sensor-type = "weighscale";
+                adi,excitation-pin-0 = <17>;
+                adi,excitation-pin-1 = <18>;
+                adi,excitation-pin-2 = <19>;
+                adi,excitation-pin-3 = <20>;
+                adi,excitation-ac;
+            };
+        };
+    };
+...
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4691.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4691 Family Multichannel SAR ADCs
+
+maintainers:
+  - Radu Sabau <radu.sabau@analog.com>
+
+description: |
+  The AD4691 family are high-speed, low-power, multichannel successive
+  approximation register (SAR) analog-to-digital converters (ADCs) with
+  an SPI-compatible serial interface. The ADC supports CNV Burst Mode,
+  where an external PWM drives the CNV pin, and Manual Mode, where CNV
+  is directly tied to the SPI chip-select.
+
+  Datasheets:
+    * https://www.analog.com/en/products/ad4691.html
+    * https://www.analog.com/en/products/ad4692.html
+    * https://www.analog.com/en/products/ad4693.html
+    * https://www.analog.com/en/products/ad4694.html
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4691
+      - adi,ad4692
+      - adi,ad4693
+      - adi,ad4694
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 40000000
+
+  spi-cpol: true
+  spi-cpha: true
+
+  avdd-supply:
+    description: Analog power supply (4.5V to 5.5V).
+
+  vdd-supply:
+    description:
+      External 1.8V digital core supply. When present, the internal LDO is
+      disabled (LDO_EN = 0). Mutually exclusive with ldo-in-supply.
+
+  ldo-in-supply:
+    description:
+      LDO input supply (2.4V to 5.5V). When present and vdd-supply is absent,
+      the internal LDO generates 1.8V VDD from this input (LDO_EN = 1).
+      Mutually exclusive with vdd-supply.
+
+  vio-supply:
+    description: I/O voltage supply (1.71V to 1.89V or VDD).
+
+  ref-supply:
+    description: External reference voltage supply (2.4V to 5.25V).
+
+  refin-supply:
+    description: Internal reference buffer input supply.
+
+  reset-gpios:
+    description:
+      GPIO line controlling the hardware reset pin (active-low).
+    maxItems: 1
+
+  pwms:
+    description:
+      PWM connected to the CNV pin. When present, selects CNV Burst Mode where
+      the PWM drives the conversion rate. When absent, Manual Mode is used
+      (CNV tied to SPI CS).
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt lines connected to the ADC GP pins. Each GP pin can be
+      physically wired to an interrupt-capable input on the SoC.
+    maxItems: 4
+
+  interrupt-names:
+    description: Names of the interrupt lines, matching the GP pin names.
+    minItems: 1
+    maxItems: 4
+    items:
+      enum:
+        - gp0
+        - gp1
+        - gp2
+        - gp3
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  '#trigger-source-cells':
+    description:
+      This node can act as a trigger source. The single cell in a consumer
+      reference specifies the GP pin number (0-3) used as the trigger output.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vio-supply
+
+allOf:
+  # vdd-supply and ldo-in-supply are mutually exclusive, one is required:
+  # either an external 1.8V VDD is provided or the internal LDO is fed from
+  # ldo-in-supply to generate VDD.
+  - oneOf:
+      - required:
+          - vdd-supply
+      - required:
+          - ldo-in-supply
+  # ref-supply and refin-supply are mutually exclusive, one is required
+  - oneOf:
+      - required:
+          - ref-supply
+      - required:
+          - refin-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    /* AD4692 in CNV Burst Mode with SPI offload */
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad4692";
+            reg = <0>;
+            spi-cpol;
+            spi-cpha;
+            spi-max-frequency = <40000000>;
+
+            avdd-supply = <&avdd_supply>;
+            ldo-in-supply = <&avdd_supply>;
+            vio-supply = <&vio_supply>;
+            ref-supply = <&ref_5v>;
+
+            reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+
+            pwms = <&pwm_gen 0 0>;
+
+            #trigger-source-cells = <1>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    /* AD4692 in Manual Mode (CNV tied to SPI CS) */
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad4692";
+            reg = <0>;
+            spi-cpol;
+            spi-cpha;
+            spi-max-frequency = <31250000>;
+
+            avdd-supply = <&avdd_supply>;
+            ldo-in-supply = <&avdd_supply>;
+            vio-supply = <&vio_supply>;
+            refin-supply = <&refin_supply>;
+
+            reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+        };
+    };
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4695.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices Easy Drive Multiplexed SAR Analog to Digital Converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  A family of similar multi-channel analog to digital converters with SPI bus.
+
+  * https://www.analog.com/en/products/ad4695.html
+  * https://www.analog.com/en/products/ad4696.html
+  * https://www.analog.com/en/products/ad4697.html
+  * https://www.analog.com/en/products/ad4698.html
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4695
+      - adi,ad4696
+      - adi,ad4697
+      - adi,ad4698
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 80000000
+
+  spi-cpol: true
+  spi-cpha: true
+
+  spi-rx-bus-width:
+    items:
+      minimum: 1
+      maximum: 4
+
+  avdd-supply:
+    description: Analog power supply.
+
+  vio-supply:
+    description: I/O pin power supply.
+
+  ldo-in-supply:
+    description: Internal LDO Input. Mutually exclusive with vdd-supply.
+
+  vdd-supply:
+    description: Core power supply. Mutually exclusive with ldo-in-supply.
+
+  ref-supply:
+    description:
+      External reference voltage. Mutually exclusive with refin-supply.
+
+  refin-supply:
+    description:
+      Internal reference buffer input. Mutually exclusive with ref-supply.
+
+  com-supply:
+    description: Common voltage supply for pseudo-differential analog inputs.
+
+  adi,no-ref-current-limit:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When this flag is present, the REF Overvoltage Reduced Current protection
+      is disabled.
+
+  adi,no-ref-high-z:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable this flag if the ref-supply requires Reference Input High-Z Mode
+      to be disabled for proper operation.
+
+  cnv-gpios:
+    description: The Convert Input (CNV). If omitted, CNV is tied to SPI CS.
+    maxItems: 1
+
+  reset-gpios:
+    description: The Reset Input (RESET). Should be configured GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  pwms:
+    description: PWM signal connected to the CNV pin.
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Signal coming from the BSY_ALT_GP0 pin (ALERT or BUSY).
+      - description: Signal coming from the GP2 pin (ALERT).
+      - description: Signal coming from the GP3 pin (BUSY).
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: gp0
+      - const: gp2
+      - const: gp3
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      The first cell is the GPn number: 0 to 3.
+      The second cell takes standard GPIO flags.
+
+  '#trigger-source-cells':
+    description: |
+      First cell indicates the output signal: 0 = BUSY, 1 = ALERT.
+      Second cell indicates which GPn pin is used: 0, 2 or 3.
+
+      For convenience, macros for these values are available in
+      dt-bindings/iio/adc/adi,ad4695.h.
+    const: 2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^in(?:[13579]|1[135])-supply$":
+    description:
+      Optional voltage supply for odd numbered channels when they are used as
+      the negative input for a pseudo-differential channel.
+
+  "^channel@[0-9a-f]$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+    description:
+      Describes each individual channel. In addition the properties defined
+      below, bipolar from adc.yaml is also supported.
+
+    properties:
+      reg:
+        maximum: 15
+
+      common-mode-channel:
+        description:
+          Describes the common mode channel for single channels. 0xFF is REFGND
+          and OxFE is COM. Macros are available for these values in
+          dt-bindings/iio/adc/adi,ad4695.h. Values 1 to 15 correspond to INx
+          inputs. Only odd numbered INx inputs can be used as common mode
+          channels.
+        enum: [1, 3, 5, 7, 9, 11, 13, 15, 0xFE, 0xFF]
+        default: 0xFF
+
+      adi,no-high-z:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Enable this flag if the input pin requires the Analog Input High-Z
+          Mode to be disabled for proper operation.
+
+    required:
+      - reg
+
+    allOf:
+      # bipolar mode can't be used with REFGND
+      - if:
+          properties:
+            common-mode-channel:
+              const: 0xFF
+        then:
+          properties:
+            bipolar: false
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vio-supply
+
+allOf:
+  - oneOf:
+      - required:
+          - ldo-in-supply
+      - required:
+          - vdd-supply
+
+  - oneOf:
+      - required:
+          - ref-supply
+      - required:
+          - refin-supply
+
+  # the internal reference buffer always requires high-z mode
+  - if:
+      required:
+        - refin-supply
+    then:
+      properties:
+        adi,no-ref-high-z: false
+
+  # limit channels for 8-channel chips
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad4697
+              - adi,ad4698
+    then:
+      patternProperties:
+        "^in(?:9|1[135])-supply$": false
+        "^channel@[0-7]$":
+          properties:
+            reg:
+              maximum: 7
+            common-mode-channel:
+              enum: [1, 3, 5, 7, 0xFE, 0xFF]
+        "^channel@[8-9a-f]$": false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/iio/adc/adi,ad4695.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad4695";
+            reg = <0>;
+            spi-cpol;
+            spi-cpha;
+            spi-max-frequency = <80000000>;
+            avdd-supply = <&power_supply>;
+            ldo-in-supply = <&power_supply>;
+            vio-supply = <&io_supply>;
+            refin-supply = <&supply_5V>;
+            com-supply = <&supply_2V5>;
+            in3-supply = <&supply_2V5>;
+            reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* Pseudo-differential channel between IN0 and REFGND. */
+            channel@0 {
+                reg = <0>;
+            };
+
+            /* Pseudo-differential channel between IN1 and COM. */
+            channel@1 {
+                reg = <1>;
+                common-mode-channel = <AD4695_COMMON_MODE_COM>;
+                bipolar;
+            };
+
+            /* Pseudo-differential channel between IN2 and IN3. */
+            channel@2 {
+                reg = <2>;
+                common-mode-channel = <3>;
+                bipolar;
+            };
+        };
+    };
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4851.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD485X family
+
+maintainers:
+  - Sergiu Cuciurean <sergiu.cuciurean@analog.com>
+  - Dragos Bogdan <dragos.bogdan@analog.com>
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  Analog Devices AD485X fully buffered, 8-channel simultaneous sampling,
+  16/20-bit, 1 MSPS data acquisition system (DAS) with differential, wide
+  common-mode range inputs.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4855.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4856.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4857.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4858.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4851
+      - adi,ad4852
+      - adi,ad4853
+      - adi,ad4854
+      - adi,ad4855
+      - adi,ad4856
+      - adi,ad4857
+      - adi,ad4858
+      - adi,ad4858i
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+
+  vee-supply: true
+
+  vdd-supply: true
+
+  vddh-supply: true
+
+  vddl-supply: true
+
+  vio-supply: true
+
+  vrefbuf-supply: true
+
+  vrefio-supply: true
+
+  pwms:
+    description: PWM connected to the CNV pin.
+    maxItems: 1
+
+  io-backends:
+    maxItems: 1
+
+  pd-gpios:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 25000000
+
+  spi-3wire: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel(@[0-7])?$":
+    $ref: adc.yaml
+    type: object
+    description: Represents the channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description:
+          The channel number, as specified in the datasheet (from 0 to 7).
+        minimum: 0
+        maximum: 7
+
+      diff-channels:
+        description:
+          Each channel can be configured as a bipolar differential channel.
+          The ADC uses the same positive and negative inputs for this.
+          This property must be specified as 'reg' (or the channel number) for
+          both positive and negative inputs (i.e. diff-channels = <reg reg>).
+          Since the configuration is bipolar differential, the 'bipolar'
+          property is required.
+        items:
+          minimum: 0
+          maximum: 7
+
+      bipolar: true
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+  - vee-supply
+  - vdd-supply
+  - vio-supply
+  - pwms
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0{
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "adi,ad4858";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            vcc-supply = <&vcc>;
+            vdd-supply = <&vdd>;
+            vee-supply = <&vee>;
+            vddh-supply = <&vddh>;
+            vddl-supply = <&vddl>;
+            vio-supply = <&vio>;
+            pwms = <&pwm_gen 0 0>;
+            io-backends = <&iio_backend>;
+
+            channel@0 {
+              reg = <0>;
+              diff-channels = <0 0>;
+              bipolar;
+            };
+
+            channel@1 {
+              reg = <1>;
+            };
+        };
+    };
+...
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7091R-2/-4/-5/-8 Multi-Channel 12-Bit ADCs
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+
+description: |
+  Analog Devices AD7091R5 4-Channel 12-Bit ADC supporting I2C interface
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf
+  Analog Devices AD7091R-2/AD7091R-4/AD7091R-8 2-/4-/8-Channel 12-Bit ADCs
+  supporting SPI interface
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7091R-2_7091R-4_7091R-8.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7091r2
+      - adi,ad7091r4
+      - adi,ad7091r5
+      - adi,ad7091r8
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Provide VDD power to the sensor (VDD range is from 2.7V to 5.25V).
+
+  vdrive-supply:
+    description:
+      Determines the voltage level at which the interface logic will operate.
+      The V_drive voltage range is from 1.8V to 5.25V and must not exceed VDD by
+      more than 0.3V.
+
+  vref-supply:
+    description:
+      Phandle to the vref power supply
+
+  convst-gpios:
+    description:
+      GPIO connected to the CONVST pin.
+      This logic input is used to initiate conversions on the analog
+      input channels.
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt for signaling when conversion results exceed the high limit for
+      ADC readings or fall below the low limit for them. Interrupt source must
+      be attached to ALERT/BUSY/GPO0 pin.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  # AD7091R-2 does not have ALERT/BUSY/GPO pin
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091r2
+    then:
+      properties:
+        interrupts: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091r2
+              - adi,ad7091r4
+              - adi,ad7091r8
+    then:
+      required:
+        - convst-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@2f {
+            compatible = "adi,ad7091r5";
+            reg = <0x2f>;
+
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7091r8";
+            reg = <0x0>;
+            spi-max-frequency = <1000000>;
+            vref-supply = <&adc_vref>;
+            convst-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+        };
+    };
+...
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7124.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7124 ADC device driver
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD7124 ADC device. Datasheet can be
+  found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7124-8.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7124-4
+      - adi,ad7124-8
+
+  reg:
+    description: SPI chip select number for the device
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Optional external clock connected to the CLK pin.
+
+  clock-names:
+    deprecated: true
+    description:
+      MCLK is an internal counter in the ADC. Do not use this property.
+    items:
+      - const: mclk
+
+  '#clock-cells':
+    description:
+      The CLK pin can be used as an output. When that is the case, include
+      this property.
+    const: 0
+
+  interrupts:
+    description: IRQ line for the ADC
+    maxItems: 1
+
+  rdy-gpios:
+    description:
+      GPIO reading the R̅D̅Y̅ line. Having such a GPIO is technically optional but
+      highly recommended because DOUT/R̅D̅Y̅ toggles during SPI transfers (in its
+      DOUT aka MISO role) and so usually triggers a spurious interrupt. The
+      distinction between such a spurious event and a real one can only be done
+      by reading such a GPIO. (There is a register telling the same
+      information, but accessing that one needs a SPI transfer which then
+      triggers another interrupt event.)
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  refin1-supply:
+    description: refin1 supply can be used as reference for conversion.
+
+  refin2-supply:
+    description: refin2 supply can be used as reference for conversion.
+
+  avdd-supply:
+    description: avdd supply can be used as reference for conversion.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+# Can't have both clock input and output at the same time.
+not:
+  required:
+    - '#clock-cells'
+    - clocks
+
+patternProperties:
+  "^channel@([0-9]|1[0-5])$":
+    $ref: adc.yaml
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 8 channels on ad7124-4
+          and 16 channels on ad7124-8, numbered from 0 to 15.
+        items:
+          minimum: 0
+          maximum: 15
+
+      adi,reference-select:
+        description: |
+          Select the reference source to use when converting on
+          the specific channel. Valid values are:
+          0: REFIN1(+)/REFIN1(−).
+          1: REFIN2(+)/REFIN2(−).
+          3: AVDD
+          If this field is left empty, internal reference is selected.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 3]
+
+      diff-channels: true
+
+      bipolar: true
+
+      adi,buffered-positive:
+        description: Enable buffered mode for positive input.
+        type: boolean
+
+      adi,buffered-negative:
+        description: Enable buffered mode for negative input.
+        type: boolean
+
+    required:
+      - reg
+      - diff-channels
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7124-4";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        interrupts = <25 2>;
+        interrupt-parent = <&gpio>;
+        rdy-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+        refin1-supply = <&adc_vref>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+          diff-channels = <0 1>;
+          adi,reference-select = <0>;
+          adi,buffered-positive;
+        };
+
+        channel@1 {
+          reg = <1>;
+          bipolar;
+          diff-channels = <2 3>;
+          adi,reference-select = <0>;
+          adi,buffered-positive;
+          adi,buffered-negative;
+        };
+
+        channel@2 {
+          reg = <2>;
+          diff-channels = <4 5>;
+        };
+
+        channel@3 {
+          reg = <3>;
+          diff-channels = <6 7>;
+        };
+      };
+    };
@@ -0,0 +1,483 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7173.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7173 ADC
+
+maintainers:
+  - Ceclan Dumitru <dumitru.ceclan@analog.com>
+
+description: |
+  Analog Devices AD717x ADC's:
+  The AD717x family offer a complete integrated Sigma-Delta ADC solution which
+  can be used in high precision, low noise single channel applications
+  (Life Science measurements) or higher speed multiplexed applications
+  (Factory Automation PLC Input modules). The Sigma-Delta ADC is intended
+  primarily for measurement of signals close to DC but also delivers
+  outstanding performance with input bandwidths out to ~10kHz.
+
+  Analog Devices AD411x ADC's:
+  The AD411X family encompasses a series of low power, low noise, 24-bit,
+  sigma-delta analog-to-digital converters that offer a versatile range of
+  specifications. They integrate an analog front end suitable for processing
+  fully differential/single-ended and bipolar voltage inputs.
+
+  Datasheets for supported chips:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4111.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4112.pdf
+    <AD4113: not released yet>
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4114.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4115.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4116.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-4.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-2.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-8.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7176-2.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7177-2.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4111
+      - adi,ad4112
+      - adi,ad4113
+      - adi,ad4114
+      - adi,ad4115
+      - adi,ad4116
+      - adi,ad7172-2
+      - adi,ad7172-4
+      - adi,ad7173-8
+      - adi,ad7175-2
+      - adi,ad7175-8
+      - adi,ad7176-2
+      - adi,ad7177-2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: |
+          Ready: multiplexed with SPI data out. While SPI CS is low,
+          can be used to indicate the completion of a conversion.
+
+      - description: |
+          Error: The three error bits in the status register (ADC_ERROR, CRC_ERROR,
+          and REG_ERROR) are OR'ed, inverted, and mapped to the ERROR pin.
+          Therefore, the ERROR pin indicates that an error has occurred.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: rdy
+      - const: err
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  gpio-controller:
+    description: Marks the device node as a GPIO controller.
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell is the GPIO number and the second cell specifies
+      GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+
+  vref-supply:
+    description: |
+      Differential external reference supply used for conversion. The reference
+      voltage (Vref) specified here must be the voltage difference between the
+      REF+ and REF- pins: Vref = (REF+) - (REF-).
+
+  vref2-supply:
+    description: |
+      Differential external reference supply used for conversion. The reference
+      voltage (Vref2) specified here must be the voltage difference between the
+      REF2+ and REF2- pins: Vref2 = (REF2+) - (REF2-).
+
+  avdd-supply:
+    description: Avdd supply, can be used as reference for conversion.
+                 This supply is referenced to AVSS, voltage specified here
+                 represents (AVDD1 - AVSS).
+
+  avdd2-supply:
+    description: Avdd2 supply, used as the input to the internal voltage regulator.
+                 This supply is referenced to AVSS, voltage specified here
+                 represents (AVDD2 - AVSS).
+
+  iovdd-supply:
+    description: iovdd supply, used for the chip digital interface.
+
+  clocks:
+    maxItems: 1
+    description: |
+      Optional external clock source. Can include one clock source: external
+      clock or external crystal.
+
+  clock-names:
+    enum:
+      - ext-clk
+      - xtal
+
+  '#clock-cells':
+    const: 0
+
+  rdy-gpios:
+    description:
+      GPIO reading the R̅D̅Y̅ line. Having such a GPIO is technically optional but
+      highly recommended because DOUT/R̅D̅Y̅ toggles during SPI transfers (in its
+      DOUT aka MISO role) and so usually triggers a spurious interrupt. The
+      distinction between such a spurious event and a real one can only be done
+      by reading such a GPIO. (There is a register telling the same
+      information, but accessing that one needs a SPI transfer which then
+      triggers another interrupt event.)
+    maxItems: 1
+
+patternProperties:
+  "^channel@[0-9a-f]$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 15
+
+      diff-channels:
+        description: |
+          This property is used for defining the inputs of a differential
+          voltage channel. The first value is the positive input and the second
+          value is the negative input of the channel.
+
+          Family AD411x supports a dedicated VINCOM voltage input.
+          To select it set the second channel to 16.
+            (VIN2, VINCOM) -> diff-channels = <2 16>
+
+          There are special values that can be selected besides the voltage
+          analog inputs:
+            21: REF+
+            22: REF−
+
+          Supported only by AD7172-2, AD7172-4, AD7175-2, AD7175-8, AD7177-2,
+          must be paired together and can be used to monitor the power supply
+          of the ADC:
+            19: ((AVDD1 − AVSS)/5)+
+            20: ((AVDD1 − AVSS)/5)−
+
+        items:
+          minimum: 0
+          maximum: 31
+
+      single-channel:
+        description: |
+          This property is used for defining a current channel or the positive
+          input of a voltage channel (single-ended or pseudo-differential).
+
+          Models AD4111 and AD4112 support current channels.
+            Example: (IIN2+, IIN2−) -> single-channel = <2>
+          To correctly configure a current channel set the "adi,current-channel"
+          property to true.
+
+          To configure a single-ended/pseudo-differential channel set the
+          "common-mode-channel" property to the desired negative voltage input.
+
+          When used as a voltage channel, special inputs are valid as well.
+        minimum: 0
+        maximum: 31
+
+      common-mode-channel:
+        description:
+          This property is used for defining the negative input of a
+          single-ended or pseudo-differential voltage channel.
+
+          Special inputs are valid as well.
+        minimum: 0
+        maximum: 31
+
+      adi,reference-select:
+        description: |
+          Select the reference source to use when converting on
+          the specific channel. Valid values are:
+          vref       : REF+  /REF−
+          vref2      : REF2+ /REF2−
+          refout-avss: REFOUT/AVSS (Internal reference)
+          avdd       : AVDD  /AVSS
+
+          External reference ref2 only available on ad7173-8 and ad7172-4.
+          Internal reference refout-avss not available on ad7172-4.
+
+          If not specified, internal reference used (if available).
+        $ref: /schemas/types.yaml#/definitions/string
+        enum:
+          - vref
+          - vref2
+          - refout-avss
+          - avdd
+        default: refout-avss
+
+      adi,current-channel:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: |
+          Signal that the selected inputs are current channels.
+          Only available on AD4111 and AD4112.
+
+    required:
+      - reg
+
+    allOf:
+      - oneOf:
+          - required: [single-channel]
+            properties:
+              diff-channels: false
+          - required: [diff-channels]
+            properties:
+              single-channel: false
+              adi,current-channel: false
+              common-mode-channel: false
+
+      - if:
+          required: [common-mode-channel]
+        then:
+          properties:
+            adi,current-channel: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  # Only ad7172-4, ad7173-8 and ad7175-8 support vref2
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - adi,ad7172-4
+                - adi,ad7173-8
+                - adi,ad7175-8
+    then:
+      properties:
+        vref2-supply: false
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
+            adi,reference-select:
+              enum:
+                - vref
+                - refout-avss
+                - avdd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad4114
+              - adi,ad4115
+              - adi,ad4116
+              - adi,ad7173-8
+              - adi,ad7175-8
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
+            reg:
+              maximum: 15
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7172-2
+              - adi,ad7175-2
+              - adi,ad7176-2
+              - adi,ad7177-2
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
+            reg:
+              maximum: 3
+
+  # Model ad7172-4 does not support internal reference
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad7172-4
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
+            reg:
+              maximum: 7
+            adi,reference-select:
+              enum:
+                - vref
+                - vref2
+                - avdd
+          required:
+            - adi,reference-select
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad4111
+              - adi,ad4112
+              - adi,ad4113
+              - adi,ad4114
+              - adi,ad4115
+              - adi,ad4116
+    then:
+      properties:
+        avdd2-supply: false
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - adi,ad4111
+                - adi,ad4112
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
+            adi,current-channel: false
+
+  - if:
+      anyOf:
+        - required: [clock-names]
+        - required: [clocks]
+    then:
+      properties:
+        '#clock-cells': false
+
+unevaluatedProperties: false
+
+examples:
+  # Example AD7173-8 with external reference connected to REF+/REF-:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7173-8";
+        reg = <0>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "rdy";
+        interrupt-parent = <&gpio>;
+        spi-max-frequency = <5000000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        #clock-cells = <0>;
+
+        vref-supply = <&dummy_regulator>;
+
+        channel@0 {
+          reg = <0>;
+          bipolar;
+          diff-channels = <0 1>;
+          adi,reference-select = "vref";
+        };
+
+        channel@1 {
+          reg = <1>;
+          diff-channels = <2 3>;
+        };
+
+        channel@2 {
+          reg = <2>;
+          bipolar;
+          diff-channels = <4 5>;
+        };
+
+        channel@3 {
+          reg = <3>;
+          bipolar;
+          diff-channels = <6 7>;
+        };
+
+        channel@4 {
+          reg = <4>;
+          diff-channels = <8 9>;
+          adi,reference-select = "avdd";
+        };
+      };
+    };
+
+  # Example AD4111 with current channel and single-ended channel:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+       adc@0 {
+        compatible = "adi,ad4111";
+        reg = <0>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "rdy";
+        interrupt-parent = <&gpio>;
+        rdy-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+        spi-max-frequency = <5000000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        #clock-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+          bipolar;
+          diff-channels = <4 5>;
+        };
+
+        // Single ended channel VIN2/VINCOM
+        channel@1 {
+          reg = <1>;
+          bipolar;
+          single-channel = <2>;
+          common-mode-channel = <16>;
+        };
+
+        // Current channel IN2+/IN2-
+        channel@2 {
+          reg = <2>;
+          single-channel = <2>;
+          adi,current-channel;
+        };
+      };
+    };
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7191.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7191 ADC
+
+maintainers:
+  - Alisa-Dariana Roman <alisa.roman@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD7191 ADC device. Datasheet can be
+  found here:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7191.pdf
+  The device's PDOWN pin must be connected to the SPI controller's chip select
+  pin.
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7191
+
+  reg:
+    maxItems: 1
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  clocks:
+    maxItems: 1
+    description:
+      Must be present when CLKSEL pin is tied HIGH to select external clock
+      source (either a crystal between MCLK1 and MCLK2 pins, or a
+      CMOS-compatible clock driving MCLK2 pin). Must be absent when CLKSEL pin
+      is tied LOW to use the internal 4.92MHz clock.
+
+  interrupts:
+    maxItems: 1
+
+  avdd-supply:
+    description: AVdd voltage supply
+
+  dvdd-supply:
+    description: DVdd voltage supply
+
+  vref-supply:
+    description: Vref voltage supply
+
+  odr-gpios:
+    description:
+      ODR1 and ODR2 pins for output data rate selection. Should be defined if
+      adi,odr-value is absent.
+    minItems: 2
+    maxItems: 2
+
+  adi,odr-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Should be present if ODR pins are pin-strapped. Possible values:
+      120 Hz (ODR1=0, ODR2=0)
+      60 Hz (ODR1=0, ODR2=1)
+      50 Hz (ODR1=1, ODR2=0)
+      10 Hz (ODR1=1, ODR2=1)
+      If defined, odr-gpios must be absent.
+    enum: [120, 60, 50, 10]
+
+  pga-gpios:
+    description:
+      PGA1 and PGA2 pins for gain selection. Should be defined if adi,pga-value
+      is absent.
+    minItems: 2
+    maxItems: 2
+
+  adi,pga-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Should be present if PGA pins are pin-strapped. Possible values:
+      Gain 1 (PGA1=0, PGA2=0)
+      Gain 8 (PGA1=0, PGA2=1)
+      Gain 64 (PGA1=1, PGA2=0)
+      Gain 128 (PGA1=1, PGA2=1)
+      If defined, pga-gpios must be absent.
+    enum: [1, 8, 64, 128]
+
+  temp-gpios:
+    description: TEMP pin for temperature sensor enable.
+    maxItems: 1
+
+  chan-gpios:
+    description: CHAN pin for input channel selection.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - dvdd-supply
+  - vref-supply
+  - spi-cpol
+  - spi-cpha
+  - temp-gpios
+  - chan-gpios
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - oneOf:
+      - required:
+          - adi,odr-value
+      - required:
+          - odr-gpios
+  - oneOf:
+      - required:
+          - adi,pga-value
+      - required:
+          - pga-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7191";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+            spi-cpha;
+            clocks = <&ad7191_mclk>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            avdd-supply = <&avdd>;
+            dvdd-supply = <&dvdd>;
+            vref-supply = <&vref>;
+            adi,pga-value = <1>;
+            odr-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>, <&gpio 24 GPIO_ACTIVE_HIGH>;
+            temp-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+            chan-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+        };
+    };
@@ -0,0 +1,257 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7192.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7192 ADC device driver
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD7192 ADC device. Datasheet can be
+  found here:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7192.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7190
+      - adi,ad7192
+      - adi,ad7193
+      - adi,ad7194
+      - adi,ad7195
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  clocks:
+    maxItems: 1
+    description:
+      Optionally, either a crystal can be attached externally between MCLK1 and
+      MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2
+      pin. If absent, internal 4.92MHz clock is used, which can be made
+      available on MCLK2 pin.
+
+  clock-names:
+    enum:
+      - xtal
+      - mclk
+
+  "#clock-cells":
+    const: 0
+    description:
+      If present when internal clock is used, configured as clock provider.
+
+  interrupts:
+    maxItems: 1
+
+  aincom-supply:
+    description: |
+      AINCOM voltage supply. Analog inputs AINx are referenced to this input
+      when configured for pseudo-differential operation.
+
+  dvdd-supply:
+    description: DVdd voltage supply
+
+  avdd-supply:
+    description: AVdd voltage supply
+
+  vref-supply:
+    description: VRef voltage supply
+
+  adi,rejection-60-Hz-enable:
+    description: |
+      This bit enables a notch at 60 Hz when the first notch of the sinc
+      filter is at 50 Hz. When REJ60 is set, a filter notch is placed at
+      60 Hz when the sinc filter first notch is at 50 Hz. This allows
+      simultaneous 50 Hz/ 60 Hz rejection.
+    type: boolean
+
+  adi,refin2-pins-enable:
+    description: |
+      External reference applied between the P1/REFIN2(+) and P0/REFIN2(−) pins.
+    type: boolean
+
+  adi,buffer-enable:
+    description: |
+      Enables the buffer on the analog inputs. If cleared, the analog inputs
+      are unbuffered, lowering the power consumption of the device. If this
+      bit is set, the analog inputs are buffered, allowing the user to place
+      source impedances on the front end without contributing gain errors to
+      the system.
+    type: boolean
+
+  adi,burnout-currents-enable:
+    description: |
+      When this bit is set to 1, the 500 nA current sources in the signal
+      path are enabled. When BURN = 0, the burnout currents are disabled.
+      The burnout currents can be enabled only when the buffer is active
+      and when chop is disabled.
+    type: boolean
+
+  bipolar:
+    description: see Documentation/devicetree/bindings/iio/adc/adc.yaml
+    type: boolean
+
+  rdy-gpios:
+    description:
+      GPIO reading the R̅D̅Y̅ line. Having such a GPIO is technically optional but
+      highly recommended because DOUT/R̅D̅Y̅ toggles during SPI transfers (in its
+      DOUT aka MISO role) and so usually triggers a spurious interrupt. The
+      distinction between such a spurious event and a real one can only be done
+      by reading such a GPIO. (There is a register telling the same
+      information, but accessing that one needs a SPI transfer which then
+      triggers another interrupt event.)
+    maxItems: 1
+
+patternProperties:
+  "^channel@[0-9a-f]+$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: The channel index.
+        minimum: 0
+        maximum: 271
+
+      diff-channels:
+        description:
+          Both inputs can be connected to pins AIN1 to AIN16 by choosing the
+          appropriate value from 1 to 16.
+        items:
+          minimum: 1
+          maximum: 16
+
+      single-channel:
+        description:
+          Positive input can be connected to pins AIN1 to AIN16 by choosing the
+          appropriate value from 1 to 16. Negative input is connected to AINCOM.
+        minimum: 1
+        maximum: 16
+
+    oneOf:
+      - required:
+          - reg
+          - diff-channels
+      - required:
+          - reg
+          - single-channel
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dvdd-supply
+  - avdd-supply
+  - vref-supply
+  - spi-cpol
+  - spi-cpha
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7190
+            - adi,ad7192
+            - adi,ad7193
+            - adi,ad7195
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]+$": false
+  - if:
+      anyOf:
+        - required:
+            - clocks
+        - required:
+            - clock-names
+    then:
+      properties:
+        "#clock-cells": false
+      required:
+        - clocks
+        - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7192";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+            spi-cpha;
+            clocks = <&ad7192_mclk>;
+            clock-names = "mclk";
+            interrupts = <25 0x2>;
+            interrupt-parent = <&gpio>;
+            rdy-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+            aincom-supply = <&aincom>;
+            dvdd-supply = <&dvdd>;
+            avdd-supply = <&avdd>;
+            vref-supply = <&vref>;
+
+            adi,refin2-pins-enable;
+            adi,rejection-60-Hz-enable;
+            adi,buffer-enable;
+            adi,burnout-currents-enable;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7194";
+            reg = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+            spi-cpha;
+            #clock-cells = <0>;
+            interrupts = <25 0x2>;
+            interrupt-parent = <&gpio>;
+            rdy-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+            aincom-supply = <&aincom>;
+            dvdd-supply = <&dvdd>;
+            avdd-supply = <&avdd>;
+            vref-supply = <&vref>;
+
+            channel@0 {
+                reg = <0>;
+                diff-channels = <1 6>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                single-channel = <1>;
+            };
+        };
+    };
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7280a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7280a Lithium Ion Battery Monitoring System
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Bindings for the Analog Devices AD7280a Battery Monitoring System.
+  Used in devices such as hybrid electric cars, battery backup and power tools.
+  Multiple chips can be daisy chained and accessed via a single SPI interface.
+  Data sheet found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7280A.pdf
+
+properties:
+  compatible:
+    const: adi,ad7280a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line for the ADC
+    maxItems: 1
+
+  adi,voltage-alert-last-chan:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Allows limiting of scope of which channels are considered for voltage
+      alerts, typically because not all are wired to anything. Only applies to
+      last device in the daisy chain.
+    default: 5
+    enum: [3, 4, 5]
+
+  adi,acquisition-time-ns:
+    description:
+      Additional time may be needed to charge the sampling capacitors depending
+      on external writing.
+    default: 400
+    enum: [400, 800, 1200, 1600]
+
+  adi,thermistor-termination:
+    type: boolean
+    description:
+      Enable the thermistor termination function.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7280a";
+        reg = <0>;
+        spi-max-frequency = <700000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 2>;
+        adi,thermistor-termination;
+        adi,acquisition-time-ns = <800>;
+        adi,voltage-alert-last-chan = <5>;
+      };
+    };
+...
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7291.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7291 8-Channel, I2C, 12-Bit SAR ADC with Temperature Sensor
+
+maintainers:
+  - Michael Auchter <michael.auchter@ni.com>
+
+description: |
+  Analog Devices AD7291 8-Channel I2C 12-Bit SAR ADC with Temperature Sensor
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7291.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7291
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: |
+      The regulator supply for ADC reference voltage.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7291: adc@0 {
+        compatible = "adi,ad7291";
+        reg = <0>;
+        vref-supply = <&adc_vref>;
+      };
+    };
+...
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7292.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7292 10-Bit Monitor and Control System
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt1@gmail.com>
+
+description: |
+  Analog Devices AD7292 10-Bit Monitor and Control System with ADC, DACs,
+  Temperature Sensor, and GPIOs
+
+  Specifications about the part can be found at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7292.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7292
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: |
+      The regulator supply for ADC and DAC reference voltage.
+
+  spi-cpha: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+
+patternProperties:
+  "^channel@[0-7]$":
+    $ref: adc.yaml
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 8 channels numbered from 0 to 7.
+        items:
+          - minimum: 0
+            maximum: 7
+
+      diff-channels: true
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7292: adc@0 {
+        compatible = "adi,ad7292";
+        reg = <0>;
+        spi-max-frequency = <25000000>;
+        vref-supply = <&adc_vref>;
+        spi-cpha;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+          diff-channels = <0 1>;
+        };
+        channel@2 {
+          reg = <2>;
+        };
+        channel@3 {
+          reg = <3>;
+        };
+        channel@4 {
+          reg = <4>;
+        };
+        channel@5 {
+          reg = <5>;
+        };
+        channel@6 {
+          reg = <6>;
+        };
+        channel@7 {
+          reg = <7>;
+        };
+      };
+    };
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7298.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7298 ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD7298 ADC device. Datasheet can be
+  found here:
+    https://www.analog.com/en/products/ad7298.html
+
+properties:
+  compatible:
+    const: adi,ad7298
+
+  reg:
+    maxItems: 1
+
+  vref-supply: true
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7298";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        vref-supply = <&adc_vref>;
+      };
+    };
+...
@@ -0,0 +1,339 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7380.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices Simultaneous Sampling Analog to Digital Converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  * https://www.analog.com/en/products/ad7380.html
+  * https://www.analog.com/en/products/ad7381.html
+  * https://www.analog.com/en/products/ad7383.html
+  * https://www.analog.com/en/products/ad7384.html
+  * https://www.analog.com/en/products/ad7386.html
+  * https://www.analog.com/en/products/ad7387.html
+  * https://www.analog.com/en/products/ad7388.html
+  * https://www.analog.com/en/products/ad7380-4.html
+  * https://www.analog.com/en/products/ad7381-4.html
+  * https://www.analog.com/en/products/ad7383-4.html
+  * https://www.analog.com/en/products/ad7384-4.html
+  * https://www.analog.com/en/products/ad7386-4.html
+  * https://www.analog.com/en/products/ad7387-4.html
+  * https://www.analog.com/en/products/ad7388-4.html
+  * https://www.analog.com/en/products/ad7389-4.html
+  * https://www.analog.com/en/products/adaq4370-4.html
+  * https://www.analog.com/en/products/adaq4380-4.html
+  * https://www.analog.com/en/products/adaq4381-4.html
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7380
+      - adi,ad7381
+      - adi,ad7383
+      - adi,ad7384
+      - adi,ad7386
+      - adi,ad7387
+      - adi,ad7388
+      - adi,ad7380-4
+      - adi,ad7381-4
+      - adi,ad7383-4
+      - adi,ad7384-4
+      - adi,ad7386-4
+      - adi,ad7387-4
+      - adi,ad7388-4
+      - adi,ad7389-4
+      - adi,adaq4370-4
+      - adi,adaq4380-4
+      - adi,adaq4381-4
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 80000000
+  spi-cpol: true
+  spi-cpha: true
+
+  spi-rx-bus-width:
+    maxItems: 4
+    items:
+      maximum: 1
+
+  vcc-supply:
+    description: A 3V to 3.6V supply that powers the chip.
+
+  vlogic-supply:
+    description:
+      A 1.65V to 3.6V supply for the logic pins.
+
+  refio-supply:
+    description:
+      A 2.5V to 3.3V supply for the external reference voltage. When omitted,
+      the internal 2.5V reference is used.
+
+  refin-supply:
+    description:
+      A 2.5V to 3.3V supply for external reference voltage, for ad7380-4 only.
+      For adaq devices, a 5V supply voltage. A 3.3V internal reference is
+      derived from it. Connect to vs-p-supply for normal operation.
+
+  vs-p-supply:
+    description:
+      Amplifiers positive supply.
+
+  vs-n-supply:
+    description:
+      Amplifiers negative supply.
+
+  ldo-supply:
+    description:
+      LDO supply. Connect to vs-p-supply or a 3.6 to 5.5 V supply.
+
+  aina-supply:
+    description:
+      The common mode voltage supply for the AINA- pin on pseudo-differential
+      chips.
+
+  ainb-supply:
+    description:
+      The common mode voltage supply for the AINB- pin on pseudo-differential
+      chips.
+
+  ainc-supply:
+    description:
+      The common mode voltage supply for the AINC- pin on pseudo-differential
+      chips.
+
+  aind-supply:
+    description:
+      The common mode voltage supply for the AIND- pin on pseudo-differential
+      chips.
+
+  interrupts:
+    description:
+      When the device is using 1-wire mode, this property is used to optionally
+      specify the ALERT interrupt.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+  - vlogic-supply
+
+patternProperties:
+  "^channel@[0-3]$":
+    $ref: adc.yaml
+    type: object
+
+    properties:
+      reg:
+        description:
+          The channel number. From 0 to 3 corresponding to channels A,B,C,D
+        minimum: 0
+        maximum: 3
+
+      adi,gain-milli:
+        description:
+          The hardware gain applied to the ADC input (in milli units).
+          If not present, default to 1000 (no actual gain applied).
+          Refer to the typical connection diagrams section of the datasheet for
+          pin wiring.
+        $ref: /schemas/types.yaml#/definitions/uint16
+        enum: [300, 600, 1000, 1600]
+        default: 1000
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+unevaluatedProperties: false
+
+allOf:
+  # 2-channel chips only have two SDO lines
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7380
+            - adi,ad7381
+            - adi,ad7383
+            - adi,ad7384
+            - adi,ad7386
+            - adi,ad7387
+            - adi,ad7388
+    then:
+      properties:
+        spi-rx-bus-width:
+          maxItems: 2
+
+  # pseudo-differential chips require common mode voltage supplies,
+  # true differential chips don't use them
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7383
+            - adi,ad7384
+            - adi,ad7383-4
+            - adi,ad7384-4
+    then:
+      required:
+        - aina-supply
+        - ainb-supply
+    else:
+      properties:
+        aina-supply: false
+        ainb-supply: false
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7383-4
+            - adi,ad7384-4
+    then:
+      required:
+        - ainc-supply
+        - aind-supply
+    else:
+      properties:
+        ainc-supply: false
+        aind-supply: false
+
+  # ad7380-4 uses refin-supply as external reference.
+  # adaq devices use internal reference only, derived from refin-supply
+  # All other chips from ad738x family use refio as optional external reference.
+  # When refio-supply is omitted, internal reference is used.
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7380-4
+            - adi,adaq4370-4
+            - adi,adaq4380-4
+            - adi,adaq4381-4
+    then:
+      properties:
+        refio-supply: false
+      required:
+        - refin-supply
+    else:
+      properties:
+        refin-supply: false
+
+  # adi,ad7389-4 is internal reference only
+  - if:
+      properties:
+        compatible:
+          const: adi,ad7389-4
+    then:
+      properties:
+        refio-supply: false
+
+  # adaq devices need more supplies and using channel to declare gain property
+  # only applies to adaq devices
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,adaq4370-4
+            - adi,adaq4380-4
+            - adi,adaq4381-4
+    then:
+      required:
+        - vs-p-supply
+        - vs-n-supply
+        - ldo-supply
+    else:
+      properties:
+        vs-p-supply: false
+        vs-n-supply: false
+        ldo-supply: false
+      patternProperties:
+        "^channel@[0-3]$": false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7380";
+            reg = <0>;
+
+            spi-cpol;
+            spi-cpha;
+            spi-max-frequency = <80000000>;
+
+            interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio0>;
+
+            vcc-supply = <&supply_3_3V>;
+            vlogic-supply = <&supply_3_3V>;
+            refio-supply = <&supply_2_5V>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,adaq4380-4";
+            reg = <0>;
+
+            spi-cpol;
+            spi-cpha;
+            spi-max-frequency = <80000000>;
+            spi-rx-bus-width = <1>, <1>, <1>, <1>;
+
+            interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio0>;
+
+            vcc-supply = <&supply_3_3V>;
+            vlogic-supply = <&supply_3_3V>;
+            refin-supply = <&supply_5V>;
+            vs-p-supply = <&supply_5V>;
+            vs-n-supply = <&supply_0V>;
+            ldo-supply = <&supply_5V>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+                adi,gain-milli = /bits/ 16 <300>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                adi,gain-milli = /bits/ 16 <600>;
+            };
+
+            channel@3 {
+                reg = <3>;
+                adi,gain-milli = /bits/ 16 <1000>;
+            };
+        };
+    };
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7405.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7405 family
+
+maintainers:
+  - Dragos Bogdan <dragos.bogdan@analog.com>
+  - Pop Ioan Daniel <pop.ioan-daniel@analog.com>
+
+description: |
+  Analog Devices AD7405 is a high performance isolated ADC, 1-channel,
+  16-bit with a second-order Σ-Δ modulator that converts an analog input signal
+  into a high speed, single-bit data stream.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7405.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adum7701.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adum7702.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM7703.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7405
+      - adi,adum7701
+      - adi,adum7702
+      - adi,adum7703
+
+  clocks:
+    maxItems: 1
+
+  vdd1-supply: true
+
+  vdd2-supply: true
+
+  io-backends:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - vdd1-supply
+  - vdd2-supply
+  - io-backends
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+        compatible = "adi,ad7405";
+        clocks = <&axi_clk_gen 0>;
+        vdd1-supply = <&vdd1>;
+        vdd2-supply = <&vdd2>;
+        io-backends = <&axi_adc>;
+    };
+...
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7476.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7476 and similar simple SPI ADCs from multiple manufacturers.
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  A lot of simple SPI ADCs have very straight forward interfaces.
+  They typically don't provide a MOSI pin, simply reading out data
+  on MISO when the clock toggles.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - adi,ad7091
+              - adi,ad7091r
+              - adi,ad7273
+              - adi,ad7274
+              - adi,ad7276
+              - adi,ad7277
+              - adi,ad7278
+              - adi,ad7466
+              - adi,ad7467
+              - adi,ad7468
+              - adi,ad7475
+              - adi,ad7476
+              - adi,ad7476a
+              - adi,ad7477
+              - adi,ad7477a
+              - adi,ad7478
+              - adi,ad7478a
+              - adi,ad7495
+              - adi,ad7910
+              - adi,ad7920
+              - adi,ad7940
+              - rohm,bd79105
+              - ti,adc081s
+              - ti,adc101s
+              - ti,adc121s
+              - ti,ads7866
+              - ti,ads7867
+              - ti,ads7868
+              - lltc,ltc2314-14
+      - items:
+          - const: rohm,bu79100g
+          - const: ti,ads7866
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      The data-ready interrupt. Provided via DOUT pin.
+    maxItems: 1
+
+  vcc-supply:
+    description:
+      Main powersupply voltage for the chips, sometimes referred to as VDD on
+      datasheets.  If there is no separate vref-supply, then this is needed
+      to establish channel scaling.
+
+  vdrive-supply:
+    description:
+      Some devices have separate supply for their digital control side.
+
+  vref-supply:
+    description:
+      Some devices have a specific reference voltage supplied on a different pin
+      to the other supplies. Needed to be able to establish channel scaling
+      unless there is also an internal reference available (e.g. ad7091r)
+
+  adi,conversion-start-gpios:
+    description: A GPIO used to trigger the start of a conversion
+    maxItems: 1
+
+  rdy-gpios:
+    description: A GPIO for detecting the data-ready.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+# Devices with an IRQ
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rohm,bd79105
+    then:
+      properties:
+        interrupts: true
+    else:
+      properties:
+        interrupts: false
+
+  # Devices where reference is vcc
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091
+              - adi,ad7276
+              - adi,ad7277
+              - adi,ad7278
+              - adi,ad7466
+              - adi,ad7467
+              - adi,ad7468
+              - adi,ad7940
+              - ti,adc081s
+              - ti,adc101s
+              - ti,adc121s
+              - ti,ads7866
+              - ti,ads7868
+    then:
+      required:
+        - vcc-supply
+  # Devices with a vref
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,ad7091r
+                - adi,ad7273
+                - adi,ad7274
+                - adi,ad7475
+                - lltc,ltc2314-14
+                - rohm,bd79105
+    then:
+      properties:
+        vref-supply: false
+  # Devices with a vref where it is not optional
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7273
+              - adi,ad7274
+              - adi,ad7475
+              - lltc,ltc2314-14
+              - rohm,bd79105
+    then:
+      required:
+        - vref-supply
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,ad7475
+                - adi,ad7495
+                - rohm,bd79105
+    then:
+      properties:
+        vdrive-supply: false
+
+  # Devices which support polling the data-ready via GPIO
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - rohm,bd79105
+    then:
+      properties:
+        rdy-gpios: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,ad7091
+                - adi,ad7091r
+                - rohm,bd79105
+    then:
+      properties:
+        adi,conversion-start-gpios: false
+
+  # Devices with a convstart GPIO where it is not optional
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rohm,bd79105
+    then:
+      required:
+        - adi,conversion-start-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7091r";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        vcc-supply = <&adc_vcc>;
+        vref-supply = <&adc_vref>;
+      };
+    };
+...
@@ -0,0 +1,427 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7606 Simultaneous Sampling ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices AD7606 Simultaneous Sampling ADC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7605-4.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-16.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-18.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7607.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7608.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7609.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7605-4
+      - adi,ad7606-4
+      - adi,ad7606-6
+      - adi,ad7606-8  # Referred to as AD7606 (without -8) in the datasheet
+      - adi,ad7606b
+      - adi,ad7606c-16
+      - adi,ad7606c-18
+      - adi,ad7607
+      - adi,ad7608
+      - adi,ad7609
+      - adi,ad7616
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  '#trigger-source-cells':
+    description: |
+      Cell indicates the output signal: 0 = BUSY, 1 = FIRSTDATA.
+
+      For convenience, macros for these values are available in
+      dt-bindings/iio/adc/adi,ad7606.h.
+    const: 1
+
+  # According to the datasheet, "Data is clocked in from SDI on the falling
+  # edge of SCLK, while data is clocked out on DOUTA on the rising edge of
+  # SCLK".  Also, even if not stated textually in the datasheet, it is made
+  # clear on the diagrams that sclk idles at high.  Subsequently, in case SPI
+  # interface is used, the correct way is to only set spi-cpol.
+  spi-cpha: true
+
+  spi-cpol: true
+
+  avcc-supply: true
+
+  vdrive-supply:
+    description:
+      Determines the voltage level at which the interface logic pins will
+      operate.
+
+  refin-supply:
+    description:
+      The voltage supply for optional external reference voltage.
+
+  interrupts:
+    description:
+      The BUSY pin falling edge indicates that the conversion is over, and thus
+      new data is available.
+    maxItems: 1
+
+  adi,conversion-start-gpios:
+    description:
+      Must be the device tree identifier of the CONVST pin(s). This logic input
+      is used to initiate conversions on the analog input channels. As the line
+      is active high, it should be marked GPIO_ACTIVE_HIGH.
+    minItems: 1
+    maxItems: 2
+
+  reset-gpios:
+    description:
+      Must be the device tree identifier of the RESET pin. If specified, it will
+      be asserted during driver probe. On the AD7606x, as the line is active
+      high, it should be marked GPIO_ACTIVE_HIGH. On the AD7616, as the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  standby-gpios:
+    description:
+      Must be the device tree identifier of the STBY pin. This pin is used to
+      place the AD7606 into one of two power-down modes, Standby mode or
+      Shutdown mode. As the line is active low, it should be marked
+      GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  adi,first-data-gpios:
+    description:
+      Must be the device tree identifier of the FRSTDATA pin. The FRSTDATA
+      output indicates when the first channel, V1, is being read back on either
+      the parallel, byte or serial interface. As the line is active high, it
+      should be marked GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  adi,range-gpios:
+    description:
+      Must be the device tree identifier of the RANGE pin. The state on this
+      pin determines the input range of the analog input channels. If this pin
+      is tied to a logic high, the analog input range is ±10V for all channels.
+      On the AD760X, if this pin is tied to a logic low, the analog input range
+      is ±5V for all channels. As the line is active high, it should be marked
+      GPIO_ACTIVE_HIGH. On the AD7616, there are 2 pins, and if the 2 pins are
+      tied to a logic high, software mode is enabled, otherwise one of the 3
+      possible range values is selected.
+    minItems: 1
+    maxItems: 2
+
+  adi,oversampling-ratio-gpios:
+    description:
+      Must be the device tree identifier of the over-sampling mode pins. As the
+      line is active high, it should be marked GPIO_ACTIVE_HIGH. On the AD7606X
+      parts that support it, if all 3 pins are tied to a logic high, software
+      mode is enabled.
+    maxItems: 3
+
+  adi,sw-mode:
+    description:
+      Software mode of operation, so far available only for AD7616 and AD7606B.
+      It is enabled when all three oversampling mode pins are connected to high
+      level for the AD7606B, or both the range selection are connected to high
+      level for the AD7616. The device is configured by the corresponding
+      registers. If the adi,oversampling-ratio-gpios property is defined, then
+      the driver will set the oversampling gpios to high. Otherwise, it is
+      assumed that the pins are hardwired to VDD.
+    type: boolean
+
+  pwms:
+    description:
+      In case the conversion is triggered by a PWM instead of a GPIO plugged to
+      the CONVST pin, the PWM must be referenced.
+      The first is the PWM connected to CONVST or CONVST1 for the chips with the
+      2nd PWM connected to CONVST2, if CONVST2 is available and not shorted to
+      CONVST1.
+    minItems: 1
+    maxItems: 2
+
+  pwm-names:
+    minItems: 1
+    items:
+      - const: convst1
+      - const: convst2
+
+  io-backends:
+    description:
+      A reference to the iio-backend, which is responsible handling the BUSY
+      pin's falling edge and communication.
+      An example of backend can be found at
+      http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html
+
+patternProperties:
+  "^channel@[1-8]$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description:
+          The channel number, as specified in the datasheet (from 1 to 8).
+        minimum: 1
+        maximum: 8
+
+      diff-channels:
+        description:
+          Each channel can be configured as a bipolar differential channel.
+          The ADC uses the same positive and negative inputs for this.
+          This property must be specified as 'reg' (or the channel number) for
+          both positive and negative inputs (i.e. diff-channels = <reg reg>).
+          Since the configuration is bipolar differential, the 'bipolar'
+          property is required.
+        items:
+          minimum: 1
+          maximum: 8
+
+      bipolar:
+        description:
+          The ADC channels can be configured as
+             * Bipolar single-ended
+             * Unipolar single-ended
+             * Bipolar differential
+          Therefore in the DT, if no channel node is specified, it is considered
+          'unipolar single-ended'. So for the other configurations the 'bipolar'
+          property must be specified. If 'diff-channels' is specified, it is
+          considered a bipolar differential channel. Otherwise it is bipolar
+          single-ended.
+
+      adi,rfilter-ohms:
+        description:
+          For ADCs that supports gain calibration, this property must be set to
+          the value of the external RFilter resistor. Proper gain error
+          correction is applied based on this value.
+        default: 0
+        minimum: 0
+        maximum: 64512
+
+    required:
+      - reg
+      - bipolar
+
+required:
+  - compatible
+  - reg
+  - avcc-supply
+  - vdrive-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  - oneOf:
+      - required:
+          - adi,conversion-start-gpios
+      - required:
+          - pwms
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad7616
+    then:
+      properties:
+        adi,first-data-gpios: false
+        standby-gpios: false
+        adi,range-gpios:
+          maxItems: 2
+    else:
+      properties:
+        adi,range-gpios:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7605-4
+              - adi,ad7616
+    then:
+      properties:
+        adi,oversampling-ratio-gpios: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7605-4
+              - adi,ad7606-4
+              - adi,ad7606-6
+              - adi,ad7606-8
+              - adi,ad7607
+              - adi,ad7608
+              - adi,ad7609
+              - adi,ad7616
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]+$":
+          properties:
+            adi,rfilter-ohms: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7605-4
+              - adi,ad7606-4
+              - adi,ad7606-6
+              - adi,ad7606-8
+              - adi,ad7607
+              - adi,ad7608
+              - adi,ad7609
+    then:
+      properties:
+        adi,sw-mode: false
+    else:
+      properties:
+        pwms:
+          maxItems: 1
+        pwm-names:
+          maxItems: 1
+        adi,conversion-start-gpios:
+          maxItems: 1
+
+  - if:
+      not:
+        required:
+          - adi,sw-mode
+    then:
+      patternProperties:
+        "^channel@[1-8]$": false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - adi,ad7606c-16
+              - adi,ad7606c-18
+    then:
+      patternProperties:
+        "^channel@[1-8]$": false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    iio-backend {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adi_adc@0 {
+            compatible = "adi,ad7606b";
+            reg = <0>;
+            pwms = <&axi_pwm_gen 0 0>;
+
+            avcc-supply = <&adc_vref>;
+            vdrive-supply = <&vdd_supply>;
+
+            reset-gpios = <&gpio0 91 GPIO_ACTIVE_HIGH>;
+            standby-gpios = <&gpio0 90 GPIO_ACTIVE_LOW>;
+            adi,range-gpios = <&gpio0 89 GPIO_ACTIVE_HIGH>;
+            adi,oversampling-ratio-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH
+                                            &gpio0 87 GPIO_ACTIVE_HIGH
+                                            &gpio0 86 GPIO_ACTIVE_HIGH>;
+            io-backends = <&iio_backend>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7606-8";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+
+            avcc-supply = <&adc_vref>;
+            vdrive-supply = <&vdd_supply>;
+
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+
+            adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+            adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+            adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
+                                           <&gpio 23 GPIO_ACTIVE_HIGH>,
+                                           <&gpio 26 GPIO_ACTIVE_HIGH>;
+            standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7606c-18";
+            reg = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+
+            avcc-supply = <&adc_vref>;
+            vdrive-supply = <&vdd_supply>;
+
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+
+            adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+            adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+            standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+
+            adi,sw-mode;
+
+            channel@1 {
+                reg = <1>;
+                diff-channels = <1 1>;
+                bipolar;
+            };
+
+            channel@3 {
+                reg = <3>;
+                bipolar;
+            };
+
+            channel@8 {
+                reg = <8>;
+                diff-channels = <8 8>;
+                bipolar;
+                adi,rfilter-ohms = <2048>;
+            };
+
+        };
+    };
+...
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7625.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices Fast PulSAR Analog to Digital Converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  A family of single channel differential analog to digital converters.
+
+  * https://www.analog.com/en/products/ad7625.html
+  * https://www.analog.com/en/products/ad7626.html
+  * https://www.analog.com/en/products/ad7960.html
+  * https://www.analog.com/en/products/ad7961.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7625
+      - adi,ad7626
+      - adi,ad7960
+      - adi,ad7961
+
+  vdd1-supply: true
+  vdd2-supply: true
+  vio-supply: true
+
+  ref-supply:
+    description:
+      Voltage regulator for the external reference voltage (REF).
+
+  refin-supply:
+    description:
+      Voltage regulator for the reference buffer input (REFIN).
+
+  clocks:
+    description:
+      The clock connected to the CLK pins, gated by the clk_gate PWM.
+    maxItems: 1
+
+  pwms:
+    items:
+      - description: PWM connected to the CNV input on the ADC.
+      - description: PWM that gates the clock connected to the ADC's CLK input.
+
+  pwm-names:
+    items:
+      - const: cnv
+      - const: clk_gate
+
+  io-backends:
+    description:
+      The AXI ADC IP block connected to the D+/- and DCO+/- lines of the
+      ADC. An example backend can be found at
+      http://analogdevicesinc.github.io/hdl/projects/pulsar_lvds/index.html.
+    maxItems: 1
+
+  adi,no-dco:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates the wiring of the DCO+/- lines. If true, then they are
+      grounded and the device is in self-clocked mode. If this is not
+      present, then the device is in echoed clock mode.
+
+  adi,en0-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if EN0 is hard-wired to the high state. If neither this
+      nor en0-gpios are present, then EN0 is hard-wired low.
+
+  adi,en1-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if EN1 is hard-wired to the high state. If neither this
+      nor en1-gpios are present, then EN1 is hard-wired low.
+
+  adi,en2-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if EN2 is hard-wired to the high state. If neither this
+      nor en2-gpios are present, then EN2 is hard-wired low.
+
+  adi,en3-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if EN3 is hard-wired to the high state. If neither this
+      nor en3-gpios are present, then EN3 is hard-wired low.
+
+  en0-gpios:
+    description:
+      Configurable EN0 pin.
+
+  en1-gpios:
+    description:
+      Configurable EN1 pin.
+
+  en2-gpios:
+    description:
+      Configurable EN2 pin.
+
+  en3-gpios:
+    description:
+      Configurable EN3 pin.
+
+required:
+  - compatible
+  - vdd1-supply
+  - vdd2-supply
+  - vio-supply
+  - clocks
+  - pwms
+  - pwm-names
+  - io-backends
+
+allOf:
+  - if:
+      required:
+        - ref-supply
+    then:
+      properties:
+        refin-supply: false
+  - if:
+      required:
+        - refin-supply
+    then:
+      properties:
+        ref-supply: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7625
+              - adi,ad7626
+    then:
+      properties:
+        en2-gpios: false
+        en3-gpios: false
+        adi,en2-always-on: false
+        adi,en3-always-on: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7960
+              - adi,ad7961
+    then:
+      # ad796x parts must have one of the two supplies
+      oneOf:
+        - required: [ref-supply]
+        - required: [refin-supply]
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    adc {
+        compatible = "adi,ad7625";
+        vdd1-supply = <&supply_5V>;
+        vdd2-supply = <&supply_2_5V>;
+        vio-supply = <&supply_2_5V>;
+        io-backends = <&axi_adc>;
+        clocks = <&ref_clk>;
+        pwms = <&axi_pwm_gen 0 0>, <&axi_pwm_gen 1 0>;
+        pwm-names = "cnv", "clk_gate";
+        en0-gpios = <&gpio0 86 GPIO_ACTIVE_HIGH>;
+        en1-gpios = <&gpio0 87 GPIO_ACTIVE_HIGH>;
+    };
@@ -0,0 +1,247 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7768-1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7768-1 ADC family
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices AD7768-1 24-Bit Single Channel Low Power sigma-delta ADC family
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adaq7767-1.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adaq7768-1.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adaq7769-1.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7768-1
+      - adi,adaq7767-1
+      - adi,adaq7768-1
+      - adi,adaq7769-1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+  trigger-sources:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
+    description: |
+      A list of phandles referencing trigger source providers. Each entry
+      represents a trigger source for the ADC:
+
+        - First entry specifies the device responsible for driving the
+          synchronization (SYNC_IN) pin, as an alternative to adi,sync-in-gpios.
+          This can be a `gpio-trigger` or another `ad7768-1` device. If the
+          device's own SYNC_OUT pin is internally connected to its SYNC_IN pin,
+          reference the device itself or omit this property.
+        - Second entry optionally defines a GPIO3 pin used as a START signal trigger.
+
+      Use the accompanying trigger source cell to identify the type of each entry.
+
+  interrupts:
+    description:
+      DRDY (Data Ready) pin, which signals conversion results are available.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  vref-supply:
+    description:
+      ADC reference voltage supply
+
+  adi,aaf-gain-bp:
+    description: |
+       Specifies the gain applied by the Analog Anti-Aliasing Filter (AAF)
+       to the ADC input in basis points (one hundredth of a percent).
+       The hardware gain is determined by which input pin(s) the signal goes
+       through into the AAF. The possible connections are:
+       * For the ADAQ7767-1: Input connected to IN1±, IN2± or IN3±.
+       * For the ADAQ7769-1: OUT_PGA pin connected to IN1_AAF+, IN2_AAF+,
+         or IN3_AAF+.
+    enum: [1430, 3640, 10000]
+    default: 10000
+
+  pga-gpios:
+    description:
+      GAIN 0, GAIN1 and GAIN2 pins for gain selection. For devices that have
+      PGA configuration input pins, pga-gpios must be defined.
+    minItems: 3
+    maxItems: 3
+
+  adi,sync-in-gpios:
+    maxItems: 1
+    description:
+      Enables synchronization of multiple devices that require simultaneous
+      sampling. A pulse is always required if the configuration is changed
+      in any way, for example if the filter decimation rate changes.
+      As the line is active low, it should be marked GPIO_ACTIVE_LOW.
+
+  regulators:
+    type: object
+    description:
+      list of regulators provided by this controller.
+
+    properties:
+      vcm-output:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+  reset-gpios:
+    maxItems: 1
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  "#io-channel-cells":
+    const: 1
+
+  "#trigger-source-cells":
+    description: |
+      Cell indicates the trigger output signal: 0 = SYNC_OUT, 1 = GPIO3,
+      2 = DRDY.
+
+      For better readability, macros for these values are available in
+      dt-bindings/iio/adc/adi,ad7768-1.h.
+    const: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      The first cell is for the GPIO number: 0 to 3.
+      The second cell takes standard GPIO flags.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vref-supply
+  - spi-cpol
+  - spi-cpha
+
+dependencies:
+  adi,sync-in-gpios:
+    not:
+      required:
+        - trigger-sources
+  trigger-sources:
+    not:
+      required:
+        - adi,sync-in-gpios
+
+patternProperties:
+  "^channel@([0-9]|1[0-5])$":
+    type: object
+    description: |
+      Represents the external channels which are connected to the device.
+
+    properties:
+      reg:
+        maxItems: 1
+        description: |
+          The channel number.
+
+      label:
+        description: |
+          Unique name to identify which channel this is.
+    required:
+      - reg
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  # AAF Gain property only applies to ADAQ7767-1 and ADAQ7769-1 devices
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adaq7767-1
+              - adi,adaq7769-1
+    then:
+      required:
+        - adi,aaf-gain-bp
+    else:
+      properties:
+        adi,aaf-gain-bp: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adaq7768-1
+              - adi,adaq7769-1
+    then:
+      required:
+        - pga-gpios
+    else:
+      properties:
+        pga-gpios: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7768-1";
+            reg = <0>;
+            spi-max-frequency = <2000000>;
+            spi-cpol;
+            spi-cpha;
+            gpio-controller;
+            #gpio-cells = <2>;
+            vref-supply = <&adc_vref>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-parent = <&gpio>;
+            adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            clocks = <&ad7768_mclk>;
+            clock-names = "mclk";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+                label = "channel_0";
+            };
+
+            regulators {
+              vcm_reg: vcm-output {
+                regulator-name = "ad7768-1-vcm";
+              };
+            };
+        };
+    };
+...
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7779.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD777X family 8-Channel, 24-Bit, Simultaneous Sampling ADCs
+
+maintainers:
+  - Ramona Nechita <ramona.nechita@analog.com>
+
+description: |
+  The AD777X family consist of 8-channel, simultaneous sampling analog-to-
+  digital converter (ADC). Eight full Σ-Δ ADCs are on-chip. The
+  AD7771 provides an ultralow input current to allow direct sensor
+  connection. Each input channel has a programmable gain stage
+  allowing gains of 1, 2, 4, and 8 to map lower amplitude sensor
+  outputs into the full-scale ADC input range, maximizing the
+  dynamic range of the signal chain.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7770.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7771.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7779.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7770
+      - adi,ad7771
+      - adi,ad7779
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  avdd1-supply:
+    description: Front-End analog supply AVDD1. Can be used as conversion ref.
+
+  avdd2-supply:
+    description: AVDD2 Analog Supply from 2.2 V to 3.6 V.
+
+  avdd4-supply:
+    description: AVDD4 SAR Analog Supply and Reference Source.
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: |
+          adc_rdy: Interrupt line for DRDY signal which indicates the end of
+          conversion independently of the interface selected to read back the
+          Σ-∆ conversion.
+      - description: |
+          Alert: The chip includes self diagnostic features to guarantee the
+          correct operation. If an error is detected, the ALERT pin is pulled
+          high to generate an external interruption to the controller.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - adc_rdy
+        - alert
+
+  start-gpios:
+    description:
+      Pin that controls start synchronization pulse.
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  io-backends:
+    maxItems: 1
+
+  adi,num-lanes:
+    description:
+      Number of lanes on which the data is sent on the output when the data
+      output interface is used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4]
+    default: 4
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      not:
+        required:
+          - io-backends
+    then:
+      properties:
+        adi,num-lanes: false
+
+oneOf:
+  - required:
+      - interrupts
+  - required:
+      - io-backends
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad7779";
+          reg = <0>;
+          start-gpios = <&gpio0 87 GPIO_ACTIVE_LOW>;
+          reset-gpios = <&gpio0 93 GPIO_ACTIVE_LOW>;
+          interrupt-parent = <&intc>;
+          interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-names = "adc_rdy";
+          clocks = <&adc_clk>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad7779";
+          reg = <0>;
+          start-gpios = <&gpio0 87 GPIO_ACTIVE_LOW>;
+          reset-gpios = <&gpio0 93 GPIO_ACTIVE_LOW>;
+          clocks = <&adc_clk>;
+          io-backends = <&iio_backend>;
+          adi,num-lanes = <4>;
+        };
+    };
+...
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  The ad7780 is a sigma-delta analog to digital converter. This driver provides
+  reading voltage values and status bits from both the ad778x and ad717x series.
+  Its interface also allows writing on the FILTER and GAIN GPIO pins on the
+  ad778x.
+
+  Specifications on the converters can be found at:
+    AD7170:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
+    AD7171:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
+    AD7780:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
+    AD7781:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7170
+      - adi,ad7171
+      - adi,ad7780
+      - adi,ad7781
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      The regulator supply for the ADC reference voltage.
+
+  powerdown-gpios:
+    description:
+      Must be the device tree identifier of the PDRST pin. If
+      specified, it will be asserted during driver probe. As the
+      line is active high, it should be marked GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  adi,gain-gpios:
+    description:
+      Must be the device tree identifier of the GAIN pin. Only for
+      the ad778x chips. If specified, it will be asserted during
+      driver probe. As the line is active low, it should be marked
+      GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  adi,filter-gpios:
+    description:
+      Must be the device tree identifier of the FILTER pin. Only
+      for the ad778x chips. If specified, it will be asserted
+      during driver probe. As the line is active low, it should be
+      marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  rdy-gpios:
+    description:
+      GPIO reading the R̅D̅Y̅ line. Having such a GPIO is technically optional but
+      highly recommended because DOUT/R̅D̅Y̅ toggles during SPI transfers (in its
+      DOUT aka MISO role) and so usually triggers a spurious interrupt. The
+      distinction between such a spurious event and a real one can only be done
+      by reading such a GPIO. (There is a register telling the same
+      information, but accessing that one needs a SPI transfer which then
+      triggers another interrupt event.)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7780";
+            reg = <0>;
+
+            avdd-supply = <&vdd_supply>;
+            powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+            adi,gain-gpios = <&gpio1  5 GPIO_ACTIVE_LOW>;
+            adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+        };
+    };
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7923.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs.
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908,
+   AD7918, AD7927, AD7928 8 Channels ADCs.
+
+  Specifications about the part can be found at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7923.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7904_7914_7924.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7908_7918_7928.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - adi,ad7904
+          - adi,ad7908
+          - adi,ad7914
+          - adi,ad7918
+          - adi,ad7923
+          - adi,ad7928
+      - const: adi,ad7924
+        deprecated: true
+      - items:
+          - const: adi,ad7924
+          - const: adi,ad7923
+      - items:
+          - const: adi,ad7927
+          - const: adi,ad7928
+
+  reg:
+    maxItems: 1
+
+  refin-supply:
+    description: |
+      The regulator supply for ADC reference voltage.
+
+  adi,range-double:
+    description: Sets the analog input range from 0 to 2xVREF.
+    type: boolean
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7928: adc@0 {
+        compatible = "adi,ad7928";
+        reg = <0>;
+        spi-max-frequency = <25000000>;
+        refin-supply = <&adc_vref>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7944.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices PulSAR LFCSP Analog to Digital Converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  A family of pin-compatible single channel differential analog to digital
+  converters with SPI support in a LFCSP package.
+
+  * https://www.analog.com/en/products/ad7944.html
+  * https://www.analog.com/en/products/ad7985.html
+  * https://www.analog.com/en/products/ad7986.html
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7944
+      - adi,ad7985
+      - adi,ad7986
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 111111111
+
+  spi-cpol: true
+  spi-cpha: true
+
+  adi,spi-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ single, chain ]
+    description: |
+      This property indicates the SPI wiring configuration.
+
+      When this property is omitted, it is assumed that the device is using what
+      the datasheet calls "4-wire mode". This is the conventional SPI mode used
+      when there are multiple devices on the same bus. In this mode, the CNV
+      line is used to initiate the conversion and the SDI line is connected to
+      CS on the SPI controller.
+
+      When this property is present, it indicates that the device is using one
+      of the following alternative wiring configurations:
+
+      * single: The datasheet calls this "3-wire mode". (NOTE: The datasheet's
+        definition of 3-wire mode is NOT at all related to the standard
+        spi-3wire property!) This mode is often used when the ADC is the only
+        device on the bus. In this mode, SDI is tied to VIO, and the CNV line
+        can be connected to the CS line of the SPI controller or to a GPIO, in
+        which case the CS line of the controller is unused.
+      * chain: The datasheet calls this "chain mode". This mode is used to save
+        on wiring when multiple ADCs are used. In this mode, the SDI line of
+        one chip is tied to the SDO of the next chip in the chain and the SDI of
+        the last chip in the chain is tied to GND. Only the first chip in the
+        chain is connected to the SPI bus. The CNV line of all chips are tied
+        together. The CS line of the SPI controller can be used as the CNV line
+        only if it is active high.
+
+  '#daisy-chained-devices': true
+
+  avdd-supply:
+    description: A 2.5V supply that powers the analog circuitry.
+
+  dvdd-supply:
+    description: A 2.5V supply that powers the digital circuitry.
+
+  vio-supply:
+    description:
+      A 1.8V to 2.7V supply for the digital inputs and outputs.
+
+  bvdd-supply:
+    description:
+      A voltage supply for the buffered power. When using an external reference
+      without an internal buffer (PDREF high, REFIN low), this should be
+      connected to the same supply as ref-supply. Otherwise, when using an
+      internal reference or an external reference with an internal buffer, this
+      is connected to a 5V supply.
+
+  ref-supply:
+    description:
+      Voltage regulator for the external reference voltage (REF). This property
+      is omitted when using an internal reference.
+
+  refin-supply:
+    description:
+      Voltage regulator for the reference buffer input (REFIN). When using an
+      external buffer with internal reference, this should be connected to a
+      1.2V external reference voltage supply. Otherwise, this property is
+      omitted.
+
+  cnv-gpios:
+    description:
+      The Convert Input (CNV). This input has multiple functions. It initiates
+      the conversions and selects the SPI mode of the device (chain or CS). In
+      'single' mode, this property is omitted if the CNV pin is connected to the
+      CS line of the SPI controller.
+    maxItems: 1
+
+  turbo-gpios:
+    description:
+      GPIO connected to the TURBO line. If omitted, it is assumed that the TURBO
+      line is hard-wired and the state is determined by the adi,always-turbo
+      property.
+    maxItems: 1
+
+  adi,always-turbo:
+    type: boolean
+    description:
+      When present, this property indicates that the TURBO line is hard-wired
+      and the state is always high. If neither this property nor turbo-gpios is
+      present, the TURBO line is assumed to be hard-wired and the state is
+      always low.
+
+  interrupts:
+    description:
+      The SDO pin can also function as a busy indicator. This node should be
+      connected to an interrupt that is triggered when the SDO line goes low
+      while the SDI line is high and the CNV line is low ('single' mode) or the
+      SDI line is low and the CNV line is high ('multi' mode); or when the SDO
+      line goes high while the SDI and CNV lines are high (chain mode),
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+  - vio-supply
+  - bvdd-supply
+
+allOf:
+  # ref-supply and refin-supply are mutually exclusive (neither is also valid)
+  - if:
+      required:
+        - ref-supply
+    then:
+      properties:
+        refin-supply: false
+  - if:
+      required:
+        - refin-supply
+    then:
+      properties:
+        ref-supply: false
+  # in '4-wire' mode, cnv-gpios is required, for other modes it is optional
+  - if:
+      not:
+        required:
+          - adi,spi-mode
+    then:
+      required:
+        - cnv-gpios
+  # chain mode has lower SCLK max rate and doesn't work when TURBO is enabled
+  - if:
+      required:
+        - adi,spi-mode
+      properties:
+        adi,spi-mode:
+          const: chain
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 90909090
+        adi,always-turbo: false
+      required:
+        - '#daisy-chained-devices'
+    else:
+      properties:
+        '#daisy-chained-devices': false
+  # turbo-gpios and adi,always-turbo are mutually exclusive
+  - if:
+      required:
+        - turbo-gpios
+    then:
+      properties:
+        adi,always-turbo: false
+  - if:
+      required:
+        - adi,always-turbo
+    then:
+      properties:
+        turbo-gpios: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "adi,ad7944";
+            reg = <0>;
+            spi-cpha;
+            spi-max-frequency = <111111111>;
+            avdd-supply = <&supply_2_5V>;
+            dvdd-supply = <&supply_2_5V>;
+            vio-supply = <&supply_1_8V>;
+            bvdd-supply = <&supply_5V>;
+            cnv-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+            turbo-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+        };
+    };
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7949.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7949/AD7682/AD7689 analog to digital converters
+
+maintainers:
+  - Charles-Antoine Couret <charles-antoine.couret@essensium.com>
+
+description: |
+  Specifications on the converters can be found at:
+    AD7949:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7949.pdf
+    AD7682/AD7698:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7682_7689.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7682
+      - adi,ad7689
+      - adi,ad7949
+
+  reg:
+    maxItems: 1
+
+  vrefin-supply:
+    description:
+      Buffered ADC reference voltage supply.
+
+  vref-supply:
+    description:
+      Unbuffered ADC reference voltage supply.
+
+  adi,internal-ref-microvolt:
+    description: |
+      Internal reference voltage selection in microvolts.
+
+      If no internal reference is specified, the channel will default to the
+      external reference defined by vrefin-supply (or vref-supply).
+      vrefin-supply will take precedence over vref-supply if both are defined.
+
+      If no supplies are defined, the reference selection will default to
+      4096mV internal reference.
+
+    enum: [2500000, 4096000]
+    default: 4096000
+
+  '#io-channel-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "adi,ad7949";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+        };
+
+        adc@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "adi,ad7949";
+            reg = <1>;
+            vrefin-supply = <&vdd_supply>;
+        };
+
+        adc@2 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "adi,ad7949";
+            reg = <2>;
+            adi,internal-ref-microvolt = <4096000>;
+        };
+    };
+...
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad799x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD799x analog to digital converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+
+description: |
+    Support for Analog Devices AD7991, AD7992, AD7993, AD7994, AD7995, AD7997, AD7998,
+    AD7999 and similar analog to digital converters.
+    Specifications on the converters can be found at:
+    AD7991, AD7995, AD7999:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7991_7995_7999.pdf
+    AD7992:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7992.pdf
+    AD7993, AD7994:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7993_7994.pdf
+    AD7997, AD7998:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7997_7998.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7991
+      - adi,ad7992
+      - adi,ad7993
+      - adi,ad7994
+      - adi,ad7995
+      - adi,ad7997
+      - adi,ad7998
+      - adi,ad7999
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply:
+    description:
+      ADC power supply
+
+  vref-supply:
+    description:
+      ADC reference voltage supply, optional for AD7991, AD7995 and AD7999
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc1: adc@28 {
+            reg = <0x28>;
+            compatible = "adi,ad7991";
+            interrupts = <13 2>;
+            interrupt-parent = <&gpio6>;
+
+            vcc-supply = <&vcc_3v3>;
+            vref-supply = <&adc_vref>;
+        };
+    };
+...
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad9467.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD9467 and similar High-Speed ADCs
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  The AD9467 and the parts similar with it, are high-speed analog-to-digital
+  converters (ADCs), operating in the range of 100 to 500 mega samples
+  per second (MSPS). Some parts support higher MSPS and some
+  lower MSPS, suitable for the intended application of each part.
+
+  All the parts support the register map described by Application Note AN-877
+   https://www.analog.com/media/en/technical-documentation/application-notes/AN-877.pdf
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9211.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9265.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9434.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad9211
+      - adi,ad9265
+      - adi,ad9434
+      - adi,ad9467
+      - adi,ad9643
+      - adi,ad9649
+      - adi,ad9652
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc-clk
+
+  powerdown-gpios:
+    description:
+      Pin that controls the powerdown mode of the device.
+    maxItems: 1
+
+  io-backends:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reset pin for the device.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad9467";
+            reg = <0>;
+            clocks = <&adc_clk>;
+            clock-names = "adc-clk";
+            io-backends = <&iio_backend>;
+        };
+    };
+...
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ade9000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADE9000 High Performance, Polyphase Energy Metering
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  The ADE9000 is a highly accurate, fully integrated, multiphase energy and power
+  quality monitoring device. Superior analog performance and a digital signal
+  processing (DSP) core enable accurate energy monitoring over a wide dynamic
+  range. An integrated high end reference ensures low drift over temperature
+  with a combined drift of less than ±25 ppm/°C maximum for the entire channel
+  including a programmable gain amplifier (PGA) and an analog-to-digital
+  converter (ADC).
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADE9000.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ade9000
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      enum: [irq0, irq1, dready]
+    minItems: 1
+    maxItems: 3
+
+  reset-gpios:
+    description:
+      Must be the device tree identifier of the RESET pin. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  vdd-supply: true
+
+  vref-supply: true
+
+  clocks:
+    description: External clock source when not using crystal
+    maxItems: 1
+
+  "#clock-cells":
+    description:
+      ADE9000 can provide clock output via CLKOUT pin with external buffer.
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+          compatible = "adi,ade9000";
+          reg = <0>;
+          spi-max-frequency = <7000000>;
+
+          #clock-cells = <0>;
+          reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+          interrupts = <2 IRQ_TYPE_EDGE_FALLING>, <3 IRQ_TYPE_EDGE_FALLING>, <4 IRQ_TYPE_EDGE_FALLING>;
+          interrupt-names = "irq0", "irq1", "dready";
+          interrupt-parent = <&gpio>;
+          clocks = <&ext_clock_24576khz>;
+          vdd-supply = <&vdd_reg>;
+      };
+    };
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,axi-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI ADC IP core
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices Generic AXI ADC IP core for interfacing an ADC device
+  with a high speed serial (JESD204B/C) or source synchronous parallel
+  interface (LVDS/CMOS).
+  Usually, some other interface type (i.e SPI) is used as a control
+  interface for the actual ADC, while this IP core will interface
+  to the data-lines of the ADC and handle the streaming of data into
+  memory via DMA.
+  In some cases, the AXI ADC interface is used to perform specialized
+  operation to a particular ADC, e.g access the physical bus through
+  specific registers to write ADC registers.
+  In this case, we use a different compatible which indicates the target
+  IP core's name.
+  The following IP is currently supported:
+    - AXI AD7606x: specialized version of the IP core for all the chips from
+      the ad7606 family.
+
+  https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+  https://analogdevicesinc.github.io/hdl/library/axi_ad408x/index.html
+  https://analogdevicesinc.github.io/hdl/library/axi_ad485x/index.html
+  http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-adc-10.0.a
+      - adi,axi-ad408x
+      - adi,axi-ad7606x
+      - adi,axi-ad485x
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: rx
+
+  adi,adc-dev:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A reference to a the actual ADC to which this FPGA ADC interfaces to.
+    deprecated: true
+
+  '#io-backend-cells':
+    const: 0
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^adc@[0-9a-f]+$":
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+    additionalProperties: true
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - dmas
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: adi,axi-ad7606x
+    then:
+      properties:
+        '#address-cells': false
+        '#size-cells': false
+      patternProperties:
+        "^adc@[0-9a-f]+$": false
+
+additionalProperties: false
+
+examples:
+  - |
+    adc@44a00000 {
+        compatible = "adi,axi-adc-10.0.a";
+        reg = <0x44a00000 0x10000>;
+        dmas = <&rx_dma 0>;
+        dma-names = "rx";
+        clocks = <&axi_clk>;
+        #io-backend-cells = <0>;
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    parallel_bus_controller@44a00000 {
+        compatible = "adi,axi-ad7606x";
+        reg = <0x44a00000 0x10000>;
+        dmas = <&rx_dma 0>;
+        dma-names = "rx";
+        clocks = <&ext_clk>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7606b";
+            reg = <0>;
+            pwms = <&axi_pwm_gen 0 0>;
+            pwm-names = "convst1";
+            avcc-supply = <&adc_vref>;
+            vdrive-supply = <&vdd_supply>;
+            reset-gpios = <&gpio0 91 GPIO_ACTIVE_HIGH>;
+            standby-gpios = <&gpio0 90 GPIO_ACTIVE_LOW>;
+            adi,range-gpios = <&gpio0 89 GPIO_ACTIVE_HIGH>;
+            adi,oversampling-ratio-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH
+                            &gpio0 87 GPIO_ACTIVE_HIGH
+                            &gpio0 86 GPIO_ACTIVE_HIGH>;
+            io-backends = <&parallel_bus_controller>;
+        };
+    };
+...
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,max11410.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX11410 ADC device driver
+
+maintainers:
+  - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+
+description: |
+  Bindings for the Analog Devices MAX11410 ADC device. Datasheet can be
+  found here:
+    https://datasheets.maximintegrated.com/en/ds/MAX11410.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,max11410
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description: Name of the gpio pin of max11410 used for IRQ
+    minItems: 1
+    items:
+      - enum: [gpio0, gpio1]
+      - const: gpio1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  avdd-supply:
+    description: Optional avdd supply. Used as reference when no explicit reference supplied.
+
+  vref0p-supply:
+    description: vref0p supply can be used as reference for conversion.
+
+  vref1p-supply:
+    description: vref1p supply can be used as reference for conversion.
+
+  vref2p-supply:
+    description: vref2p supply can be used as reference for conversion.
+
+  vref0n-supply:
+    description: vref0n supply can be used as reference for conversion.
+
+  vref1n-supply:
+    description: vref1n supply can be used as reference for conversion.
+
+  vref2n-supply:
+    description: vref2n supply can be used as reference for conversion.
+
+  spi-max-frequency:
+    maximum: 8000000
+
+patternProperties:
+  "^channel(@[0-9])?$":
+    $ref: adc.yaml
+    type: object
+    description: Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: The channel number in single-ended mode.
+        minimum: 0
+        maximum: 9
+
+      adi,reference:
+        description: |
+          Select the reference source to use when converting on
+          the specific channel. Valid values are:
+          0: VREF0P/VREF0N
+          1: VREF1P/VREF1N
+          2: VREF2P/VREF2N
+          3: AVDD/AGND
+          4: VREF0P/AGND
+          5: VREF1P/AGND
+          6: VREF2P/AGND
+          If this field is left empty, AVDD/AGND is selected.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4, 5, 6]
+        default: 3
+
+      adi,input-mode:
+        description: |
+          Select signal path of input channels. Valid values are:
+          0: Buffered, low-power, unity-gain path (default)
+          1: Bypass path
+          2: PGA path
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
+
+      diff-channels: true
+
+      bipolar: true
+
+      settling-time-us: true
+
+      adi,buffered-vrefp:
+        description: Enable buffered mode for positive reference.
+        type: boolean
+
+      adi,buffered-vrefn:
+        description: Enable buffered mode for negative reference.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            reg = <0>;
+            compatible = "adi,max11410";
+            spi-max-frequency = <8000000>;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "gpio1";
+
+            avdd-supply = <&adc_avdd>;
+
+            vref1p-supply = <&adc_vref1p>;
+            vref1n-supply = <&adc_vref1n>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                diff-channels = <2 3>;
+                adi,reference = <1>;
+                bipolar;
+                settling-time-us = <100000>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                diff-channels = <7 9>;
+                adi,reference = <5>;
+                adi,input-mode = <2>;
+                settling-time-us = <50000>;
+            };
+        };
+    };
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023-2025 Analog Devices Inc.
+# Copyright 2023 Kim Seer Paller
+# Copyright 2025 Marilene Andrade Garcia
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,max14001.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX14001-MAX14002 ADC
+
+maintainers:
+  - Kim Seer Paller <kimseer.paller@analog.com>
+  - Marilene Andrade Garcia <marilene.agarcia@gmail.com>
+
+description: |
+    Single channel 10 bit ADC with SPI interface.
+    Datasheet can be found here
+      https://www.analog.com/media/en/technical-documentation/data-sheets/MAX14001-MAX14002.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: adi,max14002
+      - items:
+          - const: adi,max14001
+          - const: adi,max14002
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  vdd-supply:
+    description:
+      Isolated DC-DC power supply input voltage.
+
+  vddl-supply:
+    description:
+      Logic power supply.
+
+  refin-supply:
+    description:
+      ADC voltage reference supply.
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: |
+          cout: comparator output signal that asserts high on the COUT pin
+          when ADC readings exceed the upper threshold and low when readings
+          fall below the lower threshold.
+      - description: |
+          fault: when fault reporting is enabled, the FAULT pin is asserted
+          low whenever one of the monitored fault conditions occurs.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: cout
+      - const: fault
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddl-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,max14001", "adi,max14002";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        spi-lsb-first;
+        vdd-supply = <&vdd>;
+        vddl-supply = <&vddl>;
+      };
+    };
+...
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/allwinner,sun20i-d1-gpadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner D1 General Purpose ADC
+
+maintainers:
+  - Maksim Kiselev <bigunclemax@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - allwinner,sun20i-d1-gpadc
+          - allwinner,sun55i-a523-gpadc
+      - items:
+          - enum:
+              - allwinner,sun50i-h616-gpadc
+          - const: allwinner,sun20i-d1-gpadc
+
+  "#io-channel-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun55i-a523-gpadc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Bus clock
+            - description: Module clock
+        clock-names:
+          items:
+            - const: bus
+            - const: mod
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names: false
+
+patternProperties:
+  "^channel@[0-9a-f]+$":
+    $ref: adc.yaml
+    type: object
+    description:
+      Represents the internal channels of the ADC.
+
+    properties:
+      reg:
+        items:
+          minimum: 0
+          maximum: 15
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - "#io-channel-cells"
+  - clocks
+  - compatible
+  - interrupts
+  - reg
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun20i-d1-ccu.h>
+    #include <dt-bindings/reset/sun20i-d1-ccu.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpadc: adc@2009000 {
+        compatible = "allwinner,sun20i-d1-gpadc";
+        reg = <0x2009000 0x400>;
+        clocks = <&ccu CLK_BUS_GPADC>;
+        resets = <&ccu RST_BUS_GPADC>;
+        interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+        #io-channel-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+            reg = <0>;
+        };
+
+        channel@1 {
+            reg = <1>;
+        };
+    };
+...
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/allwinner,sun8i-a33-ths.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A33 Thermal Sensor
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#io-channel-cells":
+    const: 0
+
+  "#thermal-sensor-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun8i-a33-ths
+
+  reg:
+    maxItems: 1
+
+required:
+  - "#io-channel-cells"
+  - "#thermal-sensor-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ths: ths@1c25000 {
+        compatible = "allwinner,sun8i-a33-ths";
+        reg = <0x01c25000 0x100>;
+        #thermal-sensor-cells = <0>;
+        #io-channel-cells = <0>;
+    };
+
+...
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/amlogic,meson-saradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SAR (Successive Approximation Register) A/D converter
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description:
+  Binding covers a range of ADCs found on Amlogic Meson SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-saradc
+      - items:
+          - enum:
+              - amlogic,meson8-saradc
+              - amlogic,meson8b-saradc
+              - amlogic,meson8m2-saradc
+              - amlogic,meson-gxbb-saradc
+              - amlogic,meson-gxl-saradc
+              - amlogic,meson-gxlx-saradc
+              - amlogic,meson-gxm-saradc
+              - amlogic,meson-axg-saradc
+              - amlogic,meson-g12a-saradc
+          # Usage of this generic fallback is not allowed for new devices
+          - const: amlogic,meson-saradc
+      - items:
+          - const: amlogic,meson-s4-saradc
+          - const: amlogic,meson-g12a-saradc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Interrupt indicates end of sampling.
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: clkin
+      - const: core
+      - const: adc_clk
+      - const: adc_sel
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+  amlogic,hhi-sysctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Syscon which contains the 5th bit of the TSC (temperature sensor
+      coefficient) on Meson8b and Meson8m2 (which used to calibrate the
+      temperature sensor)
+
+  nvmem-cells:
+    description: phandle to the temperature_calib eFuse cells
+    maxItems: 1
+
+  nvmem-cell-names:
+    const: temperature_calib
+
+  power-domains:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8-saradc
+              - amlogic,meson8b-saradc
+              - amlogic,meson8m2-saradc
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+    else:
+      properties:
+        nvmem-cells: false
+        mvmem-cel-names: false
+        clocks:
+          minItems: 4
+        clock-names:
+          minItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8-saradc
+              - amlogic,meson8b-saradc
+              - amlogic,meson8m2-saradc
+    then:
+      properties:
+        amlogic,hhi-sysctrl: true
+    else:
+      properties:
+        amlogic,hhi-sysctrl: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/gxbb-clkc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        adc@8680 {
+            compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
+            #io-channel-cells = <1>;
+            reg = <0x0 0x8680 0x0 0x34>;
+            interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&xtal>,
+                <&clkc CLKID_SAR_ADC>,
+                <&clkc CLKID_SAR_ADC_CLK>,
+                <&clkc CLKID_SAR_ADC_SEL>;
+            clock-names = "clkin", "core", "adc_clk", "adc_sel";
+        };
+        adc@9680 {
+            compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
+            #io-channel-cells = <1>;
+            reg = <0x0 0x9680 0x0 0x34>;
+            interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+            clock-names = "clkin", "core";
+            nvmem-cells = <&tsens_caldata>;
+            nvmem-cell-names = "temperature_calib";
+            amlogic,hhi-sysctrl = <&hhi>;
+        };
+    };
+...
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2400-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC that forms part of an ASPEED server management processor.
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+
+description:
+  This device is a 10-bit converter for 16 voltage channels.  All inputs are
+  single ended.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-adc
+      - aspeed,ast2500-adc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Input clock used to derive the sample clock. Expected to be the
+      SoC's APB clock.
+
+  resets:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    adc@1e6e9000 {
+        compatible = "aspeed,ast2400-adc";
+        reg = <0x1e6e9000 0xb0>;
+        clocks = <&syscon ASPEED_CLK_APB>;
+        resets = <&syscon ASPEED_RESET_ADC>;
+        #io-channel-cells = <1>;
+    };
+...
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC that forms part of an ASPEED server management processor.
+
+maintainers:
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+description: |
+  • 10-bits resolution for 16 voltage channels.
+  • The device split into two individual engine and each contains 8 voltage
+  channels.
+  • Channel scanning can be non-continuous.
+  • Programmable ADC clock frequency.
+  • Programmable upper and lower threshold for each channels.
+  • Interrupt when larger or less than threshold for each channels.
+  • Support hysteresis for each channels.
+  • Built-in a compensating method.
+  • Built-in a register to trim internal reference voltage.
+  • Internal or External reference voltage.
+  • Support 2 Internal reference voltage 1.2v or 2.5v.
+  • Integrate dividing circuit for battery sensing.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-adc0
+      - aspeed,ast2600-adc1
+      - aspeed,ast2700-adc0
+      - aspeed,ast2700-adc1
+    description:
+      Their trimming data, which is used to calibrate internal reference volage,
+      locates in different address of OTP.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Input clock used to derive the sample clock. Expected to be the
+      SoC's APB clock.
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  vref-supply:
+    description:
+      The external regulator supply ADC reference voltage.
+
+  aspeed,int-vref-microvolt:
+    enum: [1200000, 2500000]
+    description:
+      ADC internal reference voltage in microvolts.
+
+  aspeed,battery-sensing:
+    type: boolean
+    description:
+      Inform the driver that last channel will be used to sensor battery.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    adc0: adc@1e6e9000 {
+        compatible = "aspeed,ast2600-adc0";
+        reg = <0x1e6e9000 0x100>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        resets = <&syscon ASPEED_RESET_ADC>;
+        #io-channel-cells = <1>;
+        aspeed,int-vref-microvolt = <2500000>;
+    };
+    adc1: adc@1e6e9100 {
+        compatible = "aspeed,ast2600-adc1";
+        reg = <0x1e6e9100 0x100>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        resets = <&syscon ASPEED_RESET_ADC>;
+        #io-channel-cells = <1>;
+        aspeed,int-vref-microvolt = <2500000>;
+    };
+...
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/atmel,sama5d2-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AT91 SAMA5D2 Analog to Digital Converter (ADC)
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - atmel,sama5d2-adc
+      - microchip,sam9x60-adc
+      - microchip,sama7g5-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: adc_clk
+
+  vref-supply: true
+  vddana-supply: true
+
+  atmel,min-sample-rate-hz:
+    description: Minimum sampling rate, it depends on SoC.
+
+  atmel,max-sample-rate-hz:
+    description: Maximum sampling rate, it depends on SoC.
+
+  atmel,startup-time-ms:
+    description: Startup time expressed in ms, it depends on SoC.
+
+  atmel,trigger-edge-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      One of possible edge types for the ADTRG hardware trigger pin.
+      When the specific edge type is detected, the conversion will
+      start. Should be one of IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING
+      or IRQ_TYPE_EDGE_BOTH.
+    enum: [1, 2, 3]
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  "#io-channel-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - vddana-supply
+  - atmel,min-sample-rate-hz
+  - atmel,max-sample-rate-hz
+  - atmel,startup-time-ms
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        adc@fc030000 {
+            compatible = "atmel,sama5d2-adc";
+            reg = <0xfc030000 0x100>;
+            interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+            clocks = <&adc_clk>;
+            clock-names = "adc_clk";
+            atmel,min-sample-rate-hz = <200000>;
+            atmel,max-sample-rate-hz = <20000000>;
+            atmel,startup-time-ms = <4>;
+            vddana-supply = <&vdd_3v3_lp_reg>;
+            vref-supply = <&vdd_3v3_lp_reg>;
+            atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
+            dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
+            dma-names = "rx";
+            #io-channel-cells = <1>;
+        };
+    };
+...
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/atmel,sama9260-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AT91 sama9260 and similar Analog to Digital Converter (ADC)
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9260-adc
+      - atmel,at91sam9rl-adc
+      - atmel,at91sam9g45-adc
+      - atmel,at91sam9x5-adc
+      - atmel,at91sama5d3-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: adc_clk
+      - const: adc_op_clk
+
+  atmel,adc-channels-used:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Bitmask of the channels muxed and enabled for this device
+
+  atmel,adc-startup-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Startup Time of the ADC in microseconds as defined in the datasheet
+
+  atmel,adc-vref:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Reference voltage in millivolts for the conversions
+
+  atmel,adc-use-external-triggers:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enable the external triggers
+
+  atmel,adc-use-res:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      String corresponding to an identifier from atmel,adc-res-names property.
+      If not specified, the highest resolution will be used.
+    enum:
+      - lowres
+      - highres
+
+  atmel,adc-sleep-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enable sleep mode when no conversion
+
+  atmel,adc-sample-hold-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sample and Hold Time in microseconds
+
+  atmel,adc-ts-wires:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Number of touchscreen wires. Must be set to enable touchscreen.
+      NOTE: when adc touchscreen is enabled, the adc hardware trigger will be
+      disabled. Since touchscreen will occupy the trigger register.
+    enum:
+      - 4
+      - 5
+
+  atmel,adc-ts-pressure-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Pressure threshold for touchscreen.
+
+  "#io-channel-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - atmel,adc-channels-used
+  - atmel,adc-startup-time
+  - atmel,adc-vref
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        adc@fffb0000 {
+            compatible = "atmel,at91sam9260-adc";
+            reg = <0xfffb0000 0x100>;
+            interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+            clocks = <&adc_clk>, <&adc_op_clk>;
+            clock-names = "adc_clk", "adc_op_clk";
+            atmel,adc-channels-used = <0xff>;
+            atmel,adc-startup-time = <40>;
+            atmel,adc-use-external-triggers;
+            atmel,adc-vref = <3300>;
+            atmel,adc-use-res = "lowres";
+        };
+    };
+...
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AVIA HX711 ADC chip for weight cells
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+  The HX711 is a 24-bit ADC with selectable gain (32/64/128) and two
+  differential input channels. Channel A supports gain 64 and 128;
+  channel B supports gain 32.
+
+properties:
+  compatible:
+    enum:
+      - avia,hx711
+
+  sck-gpios:
+    description:
+      GPIO for the clock output (PD_SCK in the datasheet).
+    maxItems: 1
+
+  dout-gpios:
+    description:
+      GPIO for the data output from the sensor (DOUT in the datasheet).
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      Analog supply voltage (AVDD).
+
+  clock-frequency:
+    description:
+      Controls the SCK bit-bang timing. The value is used to derive the
+      delay between SCK edges; keep the SCK high time below 60 us to
+      avoid triggering chip power-down mode.
+    minimum: 20000
+    maximum: 2500000
+    default: 400000
+
+required:
+  - compatible
+  - sck-gpios
+  - dout-gpios
+  - avdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    weight {
+        compatible = "avia,hx711";
+        sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+        dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+        avdd-supply = <&avdd>;
+        clock-frequency = <100000>;
+    };
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/brcm,iproc-static-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's IPROC Static ADC controller
+
+maintainers:
+  - Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
+
+description: |
+  Broadcom iProc ADC controller has 8 10bit channels
+
+properties:
+  compatible:
+    const: brcm,iproc-static-adc
+
+  adc-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      syscon node defining physical base address of the controller and length
+      of memory mapped region.
+
+  "#io-channel-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: tsc_clk
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - adc-syscon
+  - "#io-channel-cells"
+  - clocks
+  - clock-names
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm-cygnus.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        adc {
+            compatible = "brcm,iproc-static-adc";
+            adc-syscon = <&ts_adc_syscon>;
+            #io-channel-cells = <1>;
+            clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+            clock-names = "tsc_clk";
+            interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/cirrus,ep9301-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP930x internal ADC
+
+description: |
+  Cirrus Logic EP9301/EP9302 SoCs' internal ADC block.
+
+  User's manual:
+  https://cdn.embeddedts.com/resource-attachments/ts-7000_ep9301-ug.pdf
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+
+properties:
+  compatible:
+    const: cirrus,ep9301-adc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    adc: adc@80900000 {
+        compatible = "cirrus,ep9301-adc";
+        reg = <0x80900000 0x28>;
+        clocks = <&syscon 24>;
+        interrupt-parent = <&vic1>;
+        interrupts = <30>;
+    };
+...
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/cosmic,10001-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cosmic Circuits CC-10001 ADC
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Cosmic Circuits 10001 10-bit ADC device.
+
+properties:
+  compatible:
+    const: cosmic,10001-adc
+
+  reg:
+    maxItems: 1
+
+  adc-reserved-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitmask of reserved channels, i.e. channels that cannot be
+      used by the OS.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: adc
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    adc@18101600 {
+        compatible = "cosmic,10001-adc";
+        reg = <0x18101600 0x24>;
+        adc-reserved-channels = <0x2>;
+        clocks = <&adc_clk>;
+        clock-names = "adc";
+        vref-supply = <&reg_1v8>;
+    };
+...
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/dlg,da9150-gpadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9150 IIO GPADC
+
+maintainers:
+  - Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
+
+description:
+  This patch adds support for general purpose ADC within the
+  DA9150 Charger & Fuel-Gauge IC.
+
+properties:
+  compatible:
+    const: dlg,da9150-gpadc
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+        compatible = "dlg,da9150-gpadc";
+        #io-channel-cells = <1>;
+    };
+...
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/envelope-detector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC envelope detector using a DAC and a comparator
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  The DAC is used to find the peak level of an alternating voltage input
+  signal by a binary search using the output of a comparator wired to
+  an interrupt pin. Like so:
+                          _
+                         | \
+    input +------>-------|+ \
+                         |   \
+           .-------.     |    }---.
+           |       |     |   /    |
+           |    dac|-->--|- /     |
+           |       |     |_/      |
+           |       |              |
+           |       |              |
+           |    irq|------<-------'
+           |       |
+           '-------'
+
+properties:
+  compatible:
+    const: axentia,tse850-envelope-detector
+
+  io-channels:
+    maxItems: 1
+    description: Channel node of the dac to be used for comparator input.
+
+  io-channel-names:
+    const: dac
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: comp
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dpot: dpot@28 {
+            compatible = "microchip,mcp4651-104";
+            reg = <0x28>;
+            #io-channel-cells = <1>;
+        };
+    };
+
+    dac: dac {
+        compatible = "dpot-dac";
+        vref-supply = <&reg_3v3>;
+        io-channels = <&dpot 0>;
+        io-channel-names = "dpot";
+        #io-channel-cells = <1>;
+    };
+
+    envelope-detector {
+        compatible = "axentia,tse850-envelope-detector";
+        io-channels = <&dac 0>;
+        io-channel-names = "dac";
+
+        interrupt-parent = <&gpio>;
+        interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "comp";
+    };
+...
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/fsl,imx25-gcq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale ADC GCQ device
+
+description:
+  This is a generic conversion queue device that can convert any of the
+  analog inputs using the ADC unit of the i.MX25.
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: fsl,imx25-gcq
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vref-ext-supply:
+    description:
+      The regulator supplying the ADC reference voltage.
+      Required when at least one subnode uses the this reference.
+
+  vref-xp-supply:
+    description:
+      The regulator supplying the ADC reference voltage on pin XP.
+      Required when at least one subnode uses this reference.
+
+  vref-yp-supply:
+    description:
+      The regulator supplying the ADC reference voltage on pin YP.
+      Required when at least one subnode uses this reference.
+
+  "#io-channel-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "[a-z][a-z0-9]+@[0-9a-f]+$":
+    type: object
+    description:
+      Child nodes used to define the reference voltages used for each channel
+
+    properties:
+      reg:
+        description: |
+          Number of the analog input.
+          0: xp
+          1: yp
+          2: xn
+          3: yn
+          4: wiper
+          5: inaux0
+          6: inaux1
+          7: inaux2
+        items:
+          - minimum: 0
+            maximum: 7
+
+      fsl,adc-refp:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Specifies the positive reference input as defined in
+          <dt-bindings/iio/adc/fsl-imx25-gcq.h>
+          0: YP voltage reference
+          1: XP voltage reference
+          2: External voltage reference
+          3: Internal voltage reference (default)
+        minimum: 0
+        maximum: 3
+
+      fsl,adc-refn:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Specifies the negative reference input as defined in
+          <dt-bindings/iio/adc/fsl-imx25-gcq.h>
+          0: XN ground reference
+          1: YN ground reference
+          2: Internal ground reference
+          3: External ground reference (default)
+        minimum: 0
+        maximum: 3
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/fsl-imx25-gcq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@50030800 {
+            compatible = "fsl,imx25-gcq";
+            reg = <0x50030800 0x60>;
+            interrupt-parent = <&tscadc>;
+            interrupts = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            inaux@5 {
+                reg = <5>;
+                fsl,adc-refp = <MX25_ADC_REFP_INT>;
+                fsl,adc-refn = <MX25_ADC_REFN_NGND>;
+            };
+        };
+    };
+...
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/fsl,imx7d-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale ADC found on the imx7d SoC
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx7d-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: adc
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx7d-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@30610000 {
+            compatible = "fsl,imx7d-adc";
+            reg = <0x30610000 0x10000>;
+            interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+            clock-names = "adc";
+            vref-supply = <&reg_vcc_3v3_mcu>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/fsl,vf610-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC found on Freescale vf610 and similar SoCs
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+
+description:
+  ADCs found on vf610/i.MX6slx and upward SoCs from Freescale.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6sx-adc
+              - fsl,imx6ul-adc
+          - const: fsl,vf610-adc
+      - items:
+          - const: fsl,vf610-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: ADC source clock (ipg clock)
+    maxItems: 1
+
+  clock-names:
+    const: adc
+
+  vref-supply:
+    description: ADC reference voltage supply.
+
+  fsl,adck-max-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 3
+    description: |
+      Maximum frequencies from datasheet operating requirements.
+      Three values necessary to cover the 3 conversion modes.
+      * Frequency in normal mode (ADLPC=0, ADHSC=0)
+      * Frequency in high-speed mode (ADLPC=0, ADHSC=1)
+      * Frequency in low-power mode (ADLPC=1, ADHSC=0)
+
+  min-sample-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Minimum sampling time in nanoseconds. This value has
+      to be chosen according to the conversion mode and the connected analog
+      source resistance (R_as) and capacitance (C_as). Refer the datasheet's
+      operating requirements. A safe default across a wide range of R_as and
+      C_as as well as conversion modes is 1000ns.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+    adc@4003b000 {
+        compatible = "fsl,vf610-adc";
+        reg = <0x4003b000 0x1000>;
+        interrupts = <0 53 0x04>;
+        clocks = <&clks VF610_CLK_ADC0>;
+        clock-names = "adc";
+        fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>;
+        vref-supply = <&reg_vcc_3v3_mcu>;
+        min-sample-time = <10000>;
+    };
+...
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/gehc,pmc-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GE HealthCare PMC Analog to Digital Converter (ADC)
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The GE HealthCare PMC ADC is a 16-Channel (voltage and current), 16-Bit ADC
+  with an I2C Interface.
+
+properties:
+  compatible:
+    const: gehc,pmc-adc
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Regulator for the VDD power supply.
+
+  vdda-supply:
+    description:
+      Regulator for the VDD analog (VDDA) power supply.
+
+  vddio-supply:
+    description:
+      Regulator for the VDD IO (VDDIO) power supply.
+
+  vref-supply:
+    description:
+      Regulator for the voltage reference power supply.
+
+  clocks:
+    maxItems: 1
+    description:
+      The component uses an external oscillator (osc) if an external oscillator
+      is connected to its clock pins. Otherwise, it uses an internal reference
+      clock.
+
+  clock-names:
+    items:
+      - const: osc
+
+  "#io-channel-cells":
+    const: 2
+    description: |
+      The first cell is the channel type (dt-bindings/iio/adc/gehc,pmc-adc.h
+      defines these values):
+       - 0: voltage
+       - 1: current
+      The second cell is the channel number from 0 to 15.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vdda-supply
+  - vddio-supply
+  - vref-supply
+  - '#io-channel-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@14 {
+            compatible = "gehc,pmc-adc";
+            reg = <0x14>;
+            vdd-supply = <&reg_vdd>;
+            vdda-supply = <&reg_vdda>;
+            vddio-supply = <&reg_vddio>;
+            vref-supply = <&reg_vref>;
+            #io-channel-cells = <2>;
+        };
+    };
+...
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/holt,hi8435.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Holt Integrated Circuits HI-8435 SPI threshold detector
+
+maintainers:
+  - Vladimir Barinov <vladimir.barinov@cogentembedded.com>
+
+description: |
+  Datasheet: http://www.holtic.com/documents/427-hi-8435_v-rev-lpdf.do
+
+properties:
+  compatible:
+    const: holt,hi8435
+
+  reg:
+    maxItems: 1
+
+  gpios:
+    description:
+      GPIO used for controlling the reset pin
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        threshold-detector@0 {
+            compatible = "holt,hi8435";
+            reg = <0>;
+            gpios = <&gpio6 1 0>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ47xx ADC controller IIO
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+description: >
+  Industrial I/O subsystem bindings for ADC controller found in
+  Ingenic JZ47xx SoCs.
+
+  ADC clients must use the format described in
+  https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml,
+  giving a phandle and IIO specifier pair ("io-channels") to the ADC controller.
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4725b-adc
+      - ingenic,jz4740-adc
+      - ingenic,jz4760-adc
+      - ingenic,jz4760b-adc
+      - ingenic,jz4770-adc
+
+  '#io-channel-cells':
+    const: 1
+    description:
+      Must be set to <1> to indicate channels are selected by index.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc
+
+  interrupts:
+    maxItems: 1
+
+  ingenic,use-internal-divider:
+    description:
+      If present, battery voltage is read from the VBAT_IR pin, which has an
+      internal 1/4 divider. If absent, it is read through the VBAT_ER pin,
+      which does not have such a divider.
+    type: boolean
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: ingenic,jz4760b-adc
+then:
+  properties:
+    ingenic,use-internal-divider: false
+
+required:
+  - compatible
+  - '#io-channel-cells'
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+
+    adc@10070000 {
+        compatible = "ingenic,jz4740-adc";
+        #io-channel-cells = <1>;
+
+        reg = <0x10070000 0x30>;
+
+        clocks = <&cgu JZ4740_CLK_ADC>;
+        clock-names = "adc";
+
+        interrupt-parent = <&intc>;
+        interrupts = <18>;
+    };
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2496.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology / Analog Devices LTC2496 ADC
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2496
+
+  vref-supply:
+    description: Power supply for the reference voltage
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - vref-supply
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "lltc,ltc2496";
+            reg = <0>;
+            vref-supply = <&ltc2496_reg>;
+            spi-max-frequency = <2000000>;
+        };
+    };
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2497.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology / Analog Devices LTC2497 and LTC2309 ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  LTC2305:
+    low noise, low power, 2-channel, 12-bit successive approximation ADC with an
+    I2C compatible serial interface.
+
+    https://www.analog.com/media/en/technical-documentation/data-sheets/23015fb.pdf
+
+  LTC2309:
+    low noise, low power, 8-channel, 12-bit successive approximation ADC with an
+    I2C compatible serial interface.
+
+    https://www.analog.com/media/en/technical-documentation/data-sheets/2309fd.pdf
+
+  LTC2497:
+  LTC2499:
+    16bit ADC supporting up to 16 single ended or 8 differential inputs.
+    I2C interface.
+
+    https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2305
+      - lltc,ltc2309
+      - lltc,ltc2497
+      - lltc,ltc2499
+
+  reg: true
+  vref-supply: true
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@76 {
+            compatible = "lltc,ltc2497";
+            reg = <0x76>;
+            vref-supply = <&ltc2497_reg>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/marvell,berlin2-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Berlin 2 Analog to Digital Converter (ADC)
+
+maintainers:
+  - Antoine Tenart <antoine.tenart@free-electrons.com>
+
+description:
+  The Berlin ADC has 8 channels, with one connected to a temperature sensor.
+  It is part of the system controller register set. The ADC node should be a
+  sub-node of the system controller node.
+
+properties:
+  compatible:
+    const: marvell,berlin2-adc
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: adc
+      - const: tsen
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    sysctrl {
+        adc {
+            compatible = "marvell,berlin2-adc";
+            interrupt-parent = <&sic>;
+            interrupts = <12>, <14>;
+            interrupt-names = "adc", "tsen";
+        };
+    };
+...
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1027.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1027 and similar ADCs
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+  - Philippe Reynes <tremyfr@yahoo.fr>
+
+description: |
+  300ks/s SPI ADCs with temperature sensors.
+
+properties:
+  compatible:
+    enum:
+        # 10-bit 8 channels
+      - maxim,max1027
+        # 10-bit 12 channels
+      - maxim,max1029
+        # 10-bit 16 channels
+      - maxim,max1031
+         # 12-bit 8 channels
+      - maxim,max1227
+         # 12-bit 12 channels
+      - maxim,max1229
+         # 12-bit 16 channels
+      - maxim,max1231
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        maxadc: adc@0 {
+            compatible = "maxim,max1027";
+            reg = <0>;
+            #io-channel-cells = <1>;
+            interrupt-parent = <&gpio5>;
+            interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max11100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX11100 ADC
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+    Single channel 16 bit ADC with SPI interface.
+
+properties:
+  compatible:
+    const: maxim,max11100
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: External reference, needed to establish input scaling.
+
+  spi-max-frequency:
+    minimum: 100000
+    maximum: 4800000
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max11100";
+            reg = <0>;
+            vref-supply = <&adc_vref>;
+            spi-max-frequency = <240000>;
+        };
+    };
+...
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1118.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1118 and similar ADCs
+
+maintainers:
+  - Akinobu Mita <akinobu.mita@gmail.com>
+
+description: |
+    Dual channel 8bit ADCs.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1117
+      - maxim,max1118
+      - maxim,max1119
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  vref-supply:
+    description: External reference, needed to establish input scaling
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max1118
+    then:
+      required:
+        - vref-supply
+    else:
+      properties:
+        vref-supply: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max1118";
+            reg = <0>;
+            vref-supply = <&adc_vref>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX11205 ADC
+
+maintainers:
+  - Ramona Bolboaca <ramona.bolboaca@analog.com>
+
+description: |
+  The MAX11205 is an ultra-low-power (< 300FA max active current),
+  high-resolution, serial-output ADC.
+
+  https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max11205a
+      - maxim,max11205b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  spi-cpha: true
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage. This is a differential
+      reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-max-frequency
+  - spi-cpha
+  - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "maxim,max11205a";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpha;
+            interrupt-parent = <&gpio>;
+            interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+            vref-supply = <&max11205_vref>;
+        };
+    };
+...
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1238.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1238 and similar ADCs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Family of simple ADCs with i2c interface and internal references.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1036
+      - maxim,max1037
+      - maxim,max1038
+      - maxim,max1039
+      - maxim,max1136
+      - maxim,max1137
+      - maxim,max1138
+      - maxim,max1139
+      - maxim,max1236
+      - maxim,max1237
+      - maxim,max1238
+      - maxim,max1239
+      - maxim,max11600
+      - maxim,max11601
+      - maxim,max11602
+      - maxim,max11603
+      - maxim,max11604
+      - maxim,max11605
+      - maxim,max11606
+      - maxim,max11607
+      - maxim,max11608
+      - maxim,max11609
+      - maxim,max11610
+      - maxim,max11611
+      - maxim,max11612
+      - maxim,max11613
+      - maxim,max11614
+      - maxim,max11615
+      - maxim,max11616
+      - maxim,max11617
+      - maxim,max11644
+      - maxim,max11645
+      - maxim,max11646
+      - maxim,max11647
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  vcc-supply: true
+  vref-supply:
+    description: Optional external reference.  If not supplied, internal
+      reference will be used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@36 {
+            compatible = "maxim,max1238";
+            reg = <0x36>;
+        };
+    };
+...
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Alexandru Lazar
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1241.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1241 12-bit, single-channel analog to digital converter
+
+maintainers:
+  - Alexandru Lazar <alazar@startmail.com>
+
+description: |
+  Bindings for the max1241 12-bit, single-channel ADC device. Datasheet
+  can be found at:
+    https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1241
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Device tree identifier of the regulator that powers the ADC.
+
+  vref-supply:
+    description:
+      Device tree identifier of the regulator that provides the external
+      reference voltage.
+
+  shutdown-gpios:
+    description:
+      GPIO spec for the GPIO pin connected to the ADC's /SHDN pin. If
+      specified, the /SHDN pin will be asserted between conversions,
+      thus enabling power-down mode.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max1241";
+            reg = <0>;
+            vdd-supply = <&adc_vdd>;
+            vref-supply = <&adc_vref>;
+            spi-max-frequency = <1000000>;
+            shutdown-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+        };
+    };
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1363.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1363 and similar ADCs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+   Family of ADCs with i2c interface, internal references and threshold
+   monitoring.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1361
+      - maxim,max1362
+      - maxim,max1363
+      - maxim,max1364
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+  vref-supply:
+    description: Optional external reference.  If not supplied, internal
+      reference will be used.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@36 {
+            compatible = "maxim,max1363";
+            reg = <0x36>;
+        };
+    };
+...
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max34408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX34408/MAX34409 current monitors with overcurrent control
+
+maintainers:
+  - Ivan Mikhaylov <fr0st61te@gmail.com>
+
+description: |
+  The MAX34408/MAX34409 are two- and four-channel current monitors that are
+  configured and monitored with a standard I2C/SMBus serial interface. Each
+  unidirectional current sensor offers precision high-side operation with a
+  low full-scale sense voltage. The devices automatically sequence through
+  two or four channels and collect the current-sense samples and average them
+  to reduce the effect of impulse noise. The raw ADC samples are compared to
+  user-programmable digital thresholds to indicate overcurrent conditions.
+  Overcurrent conditions trigger a hardware output to provide an immediate
+  indication to shut down any necessary external circuitry.
+
+  Specifications about the devices can be found at:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max34408
+      - maxim,max34409
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  powerdown-gpios:
+    description:
+      Shutdown Output. Open-drain output. This output transitions to high impedance
+      when any of the digital comparator thresholds are exceeded as long as the ENA
+      pin is high.
+    maxItems: 1
+
+  powerdown-status-gpios:
+    description:
+      SHTDN Enable Input. CMOS digital input. Connect to GND to clear the latch and
+      unconditionally deassert (force low) the SHTDN output and reset the shutdown
+      delay. Connect to VDD to enable normal latch operation of the SHTDN output.
+    maxItems: 1
+
+  vdd-supply: true
+
+patternProperties:
+  "^channel@[0-3]$":
+    $ref: adc.yaml
+    type: object
+    description:
+      Represents the internal channels of the ADC.
+
+    properties:
+      reg:
+        items:
+          - minimum: 0
+            maximum: 3
+
+      maxim,rsense-val-micro-ohms:
+        description:
+          Adjust the Rsense value to monitor higher or lower current levels for
+          input.
+        enum: [250, 500, 1000, 5000, 10000, 50000, 100000, 200000, 500000]
+        default: 1000
+
+    required:
+      - reg
+      - maxim,rsense-val-micro-ohms
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max34408
+    then:
+      patternProperties:
+        "^channel@[2-3]$": false
+        "^channel@[0-1]$":
+          properties:
+            reg:
+              maximum: 1
+    else:
+      patternProperties:
+        "^channel@[0-3]$":
+          properties:
+            reg:
+              maximum: 3
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1e {
+              compatible = "maxim,max34409";
+              reg = <0x1e>;
+              powerdown-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+              powerdown-status-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              channel@0 {
+                  reg = <0x0>;
+                  maxim,rsense-val-micro-ohms = <5000>;
+              };
+
+              channel@1 {
+                  reg = <0x1>;
+                  maxim,rsense-val-micro-ohms = <10000>;
+             };
+        };
+    };
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max9611.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX9611 and similar current sense amplifiers with integrated ADCs
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+   These devices combine a high-side current sense amplifier with a 12 bit ADC.
+   They have an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max9611
+      - maxim,max9612
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description: |
+      Value in micro Ohms of the shunt resistor connected between the RS+ and
+      RS- inputs, across which the current is measured.  Value needed to compute
+      the scaling of the measured current.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - shunt-resistor-micro-ohms
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@7c {
+            compatible = "maxim,max9611";
+            reg = <0x7c>;
+            shunt-resistor-micro-ohms = <5000>;
+        };
+    };
+...
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/mediatek,mt2701-auxadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek AUXADC - ADC on Mediatek mobile SoC (mt65xx/mt81xx/mt27xx)
+
+maintainers:
+  - Zhiyong Tao <zhiyong.tao@mediatek.com>
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description: |
+  The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found
+  in some Mediatek SoCs which among other things measures the temperatures
+  in the SoC. It can be used directly with register accesses, but it is also
+  used by thermal controller which reads the temperatures from the AUXADC
+  directly via its own bus interface. See mediatek-thermal bindings
+  for the Thermal Controller which holds a phandle to the AUXADC.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-auxadc
+          - mediatek,mt2712-auxadc
+          - mediatek,mt6765-auxadc
+          - mediatek,mt7622-auxadc
+          - mediatek,mt7986-auxadc
+          - mediatek,mt8173-auxadc
+      - items:
+          - enum:
+              - mediatek,mt7623-auxadc
+          - const: mediatek,mt2701-auxadc
+      - items:
+          - enum:
+              - mediatek,mt7981-auxadc
+          - const: mediatek,mt7986-auxadc
+      - items:
+          - enum:
+              - mediatek,mt6893-auxadc
+              - mediatek,mt8183-auxadc
+              - mediatek,mt8186-auxadc
+              - mediatek,mt8188-auxadc
+              - mediatek,mt8189-auxadc
+              - mediatek,mt8195-auxadc
+              - mediatek,mt8516-auxadc
+          - const: mediatek,mt8173-auxadc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: main
+
+  "#io-channel-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#io-channel-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        adc@11001000 {
+            compatible = "mediatek,mt8183-auxadc",
+                         "mediatek,mt8173-auxadc";
+            reg = <0 0x11001000 0 0x1000>;
+            clocks = <&infracfg CLK_INFRA_AUXADC>;
+            clock-names = "main";
+            #io-channel-cells = <1>;
+        };
+    };
+...
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/mediatek,mt6359-auxadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6350 series PMIC AUXADC
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+  The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found
+  in some MediaTek PMICs, performing various PMIC related measurements
+  such as battery and PMIC internal voltage regulators temperatures,
+  accessory detection resistance (usually, for a 3.5mm audio jack)
+  other than voltages for various PMIC internal components.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6357-auxadc
+          - mediatek,mt6358-auxadc
+          - mediatek,mt6359-auxadc
+          - mediatek,mt6363-auxadc
+          - mediatek,mt6373-auxadc
+      - items:
+          - enum:
+              - mediatek,mt6365-auxadc
+          - const: mediatek,mt6359-auxadc
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+additionalProperties: false
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/mediatek,mt6360-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6360 and similar ADCs
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt6360-adc
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+      compatible = "mediatek,mt6360-adc";
+      #io-channel-cells = <1>;
+    };
+...
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3201.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip mcp3201 and similar ADCs
+
+maintainers:
+  - Oskar Andero <oskar.andero@gmail.com>
+
+description: |
+   Family of simple ADCs with a SPI interface.
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3001
+      - microchip,mcp3002
+      - microchip,mcp3004
+      - microchip,mcp3008
+      - microchip,mcp3201
+      - microchip,mcp3202
+      - microchip,mcp3204
+      - microchip,mcp3208
+      - microchip,mcp3301
+      - microchip,mcp3550-50
+      - microchip,mcp3550-60
+      - microchip,mcp3551
+      - microchip,mcp3553
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+  spi-cpol: true
+
+  vref-supply:
+    description: External reference.
+
+  "#io-channel-cells":
+    const: 1
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "microchip,mcp3002";
+            reg = <0>;
+            vref-supply = <&vref_reg>;
+            spi-cpha;
+            spi-cpol;
+            #io-channel-cells = <1>;
+        };
+        adc@1 {
+            compatible = "microchip,mcp3002";
+            reg = <1>;
+            vref-supply = <&vref_reg>;
+            spi-max-frequency = <1500000>;
+        };
+    };
+...
@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3564.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP346X and MCP356X ADC Family
+
+maintainers:
+  - Marius Cristea <marius.cristea@microchip.com>
+
+description: |
+  Bindings for the Microchip family of 153.6 ksps, Low-Noise 16/24-Bit
+  Delta-Sigma ADCs with an SPI interface. Datasheet can be found here:
+  Datasheet for MCP3561, MCP3562, MCP3564 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP3561-2-4-Family-Data-Sheet-DS20006181C.pdf
+  Datasheet for MCP3561R, MCP3562R, MCP3564R can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf
+  Datasheet for MCP3461, MCP3462, MCP3464 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf
+  Datasheet for MCP3461R, MCP3462R, MCP3464R can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4R-Family-Data-Sheet-DS20006404C.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3461
+      - microchip,mcp3462
+      - microchip,mcp3464
+      - microchip,mcp3461r
+      - microchip,mcp3462r
+      - microchip,mcp3464r
+      - microchip,mcp3561
+      - microchip,mcp3562
+      - microchip,mcp3564
+      - microchip,mcp3561r
+      - microchip,mcp3562r
+      - microchip,mcp3564r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  vdd-supply: true
+
+  avdd-supply: true
+
+  clocks:
+    description:
+      Phandle and clock identifier for external sampling clock.
+      If not specified, the internal crystal oscillator will be used.
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line of the ADC
+    maxItems: 1
+
+  drive-open-drain:
+    description:
+      Whether to drive the IRQ signal as push-pull (default) or open-drain. Note
+      that the device requires this pin to become "high", otherwise it will stop
+      converting.
+    type: boolean
+
+  vref-supply:
+    description:
+      Some devices have a specific reference voltage supplied on a different
+      pin to the other supplies. Needed to be able to establish channel scaling
+      unless there is also an internal reference available (e.g. mcp3564r). In
+      case of "r" devices (e. g. mcp3564r), if it does not exists the internal
+      reference will be used.
+
+  microchip,hw-device-address:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description:
+      The address is set on a per-device basis by fuses in the factory,
+      configured on request. If not requested, the fuses are set for 0x1.
+      The device address is part of the device markings to avoid
+      potential confusion. This address is coded on two bits, so four possible
+      addresses are available when multiple devices are present on the same
+      SPI bus with only one Chip Select line for all devices.
+      Each device communication starts by a CS falling edge, followed by the
+      clocking of the device address (BITS[7:6] - top two bits of COMMAND BYTE
+      which is first one on the wire).
+
+  "#io-channel-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^channel@([0-9]|([1-7][0-9]))$":
+    $ref: adc.yaml
+    type: object
+    unevaluatedProperties: false
+    description: Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: The channel number in single-ended and differential mode.
+        minimum: 0
+        maximum: 79
+
+    required:
+      - reg
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
+required:
+  - compatible
+  - reg
+  - microchip,hw-device-address
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - # External vref, no internal reference
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,mcp3461
+              - microchip,mcp3462
+              - microchip,mcp3464
+              - microchip,mcp3561
+              - microchip,mcp3562
+              - microchip,mcp3564
+    then:
+      required:
+        - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "microchip,mcp3564r";
+            reg = <0>;
+            vref-supply = <&vref_reg>;
+            spi-cpha;
+            spi-cpol;
+            spi-max-frequency = <10000000>;
+            microchip,hw-device-address = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                /* CH0 to AGND */
+                reg = <0>;
+                label = "CH0";
+            };
+
+            channel@1 {
+                /* CH1 to AGND */
+                reg = <1>;
+                label = "CH1";
+            };
+
+            /* diff-channels */
+            channel@11 {
+                reg = <11>;
+
+                /* CN0, CN1 */
+                diff-channels = <0 1>;
+                label = "CH0_CH1";
+            };
+
+            channel@22 {
+                reg = <0x22>;
+
+                /* CN1, CN2 */
+                diff-channels = <1 2>;
+                label = "CH1_CH3";
+            };
+
+            channel@23 {
+                reg = <0x23>;
+
+                /* CN1, CN3 */
+                diff-channels = <1 3>;
+                label = "CH1_CH3";
+            };
+        };
+    };
+...
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP3911 Dual channel analog front end (ADC)
+
+maintainers:
+  - Marcus Folkesson <marcus.folkesson@gmail.com>
+  - Kent Gustavsson <nedo80@gmail.com>
+
+description: |
+  Bindings for the Microchip MCP3911 Dual channel ADC device. Datasheet can be
+  found here: https://ww1.microchip.com/downloads/en/DeviceDoc/20002286C.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3910
+      - microchip,mcp3911
+      - microchip,mcp3912
+      - microchip,mcp3913
+      - microchip,mcp3914
+      - microchip,mcp3918
+      - microchip,mcp3919
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  reset-gpios:
+    maxItems: 1
+
+  clocks:
+    description: |
+      Phandle and clock identifier for external sampling clock.
+      If not specified, the internal crystal oscillator will be used.
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line of the ADC
+    maxItems: 1
+
+  microchip,data-ready-hiz:
+    description:
+      Data Ready Pin Inactive State Control
+      true = The DR pin state is high-impedance
+      false = The DR pin state is logic high
+    type: boolean
+
+  microchip,device-addr:
+    description: Device address when multiple MCP3911 chips are present on the same SPI bus.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+
+  vref-supply:
+    description: |
+      Phandle to the external reference voltage supply.
+      If not specified, the internal voltage reference (1.2V) will be used.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "microchip,mcp3911";
+        reg = <0>;
+        interrupt-parent = <&gpio5>;
+        interrupts = <15 2>;
+        reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+        spi-max-frequency = <20000000>;
+        microchip,device-addr = <0>;
+        vref-supply = <&vref_reg>;
+        clocks = <&xtal>;
+      };
+    };
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,pac1921.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PAC1921 High-Side Power/Current Monitor with Anaog Output
+
+maintainers:
+  - Matteo Martelli <matteomartelli3@gmail.com>
+
+description: |
+  The PAC1921 is a power/current monitoring device with an analog output
+  and I2C/SMBus interface.
+
+  Datasheet can be found here:
+  https://ww1.microchip.com/downloads/en/DeviceDoc/PAC1921-Data-Sheet-DS20005293E.pdf
+
+properties:
+  compatible:
+    const: microchip,pac1921
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Value in micro Ohms of the shunt resistor connected between
+      the SENSE+ and SENSE- inputs, across which the current is measured.
+      Value is needed to compute the scaling of the measured current.
+
+  label:
+    description: Unique name to identify which device this is.
+
+  read-integrate-gpios:
+    description:
+      READ/INT input pin to control the current state of the device, either in
+      the INTEGRATE state when driven high, or in the READ state when driven low.
+      When not connected the pin is floating and it can be overridden by the
+      INT_EN register bit after asserting the READ/INT_OVR register bit.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - shunt-resistor-micro-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@4c {
+            compatible = "microchip,pac1921";
+            reg = <0x4c>;
+            vdd-supply = <&vdd>;
+            #io-channel-cells = <1>;
+            label = "vbat";
+            shunt-resistor-micro-ohms = <10000>;
+        };
+    };
+...
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PAC1934 Power Monitors with Accumulator
+
+maintainers:
+  - Marius Cristea <marius.cristea@microchip.com>
+
+description: |
+  This device is part of the Microchip family of Power Monitors with
+  Accumulator.
+  The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,pac1931
+      - microchip,pac1932
+      - microchip,pac1933
+      - microchip,pac1934
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  slow-io-gpios:
+    description:
+      A GPIO used to trigger a change is sampling rate (lowering the chip power
+      consumption). If configured in SLOW mode, if this pin is forced high,
+      sampling rate is forced to eight samples/second. When it is forced low,
+      the sampling rate is 1024 samples/second unless a different sample rate
+      has been programmed.
+
+patternProperties:
+  "^channel@[1-4]+$":
+    type: object
+    $ref: adc.yaml
+    description:
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        items:
+          minimum: 1
+          maximum: 4
+
+      shunt-resistor-micro-ohms:
+        description:
+          Value in micro Ohms of the shunt resistor connected between
+          the SENSE+ and SENSE- inputs, across which the current is measured.
+          Value is needed to compute the scaling of the measured current.
+
+    required:
+      - reg
+      - shunt-resistor-micro-ohms
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@10 {
+            compatible = "microchip,pac1934";
+            reg = <0x10>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@1 {
+                reg = <0x1>;
+                shunt-resistor-micro-ohms = <24900000>;
+                label = "CPU";
+            };
+
+            channel@2 {
+                reg = <0x2>;
+                shunt-resistor-micro-ohms = <49900000>;
+                label = "GPU";
+            };
+
+            channel@3 {
+                reg = <0x3>;
+                shunt-resistor-micro-ohms = <75000000>;
+                label = "MEM";
+                bipolar;
+            };
+
+            channel@4 {
+                reg = <0x4>;
+                shunt-resistor-micro-ohms = <100000000>;
+                label = "NET";
+                bipolar;
+            };
+        };
+    };
+
+...
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/motorola,cpcap-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC ADC
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  On Motorola phones like droid 4 there is a custom CPCAP PMIC. This PMIC
+  has ADCs that are used for battery charging and USB PHY VBUS and ID pin
+  detection.
+
+properties:
+  compatible:
+    enum:
+      - motorola,cpcap-adc
+      - motorola,mapphone-cpcap-adc
+      - motorola,mot-cpcap-adc
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: adcdone
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - interrupts
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc {
+            compatible = "motorola,mapphone-cpcap-adc";
+            interrupt-parent = <&cpcap>;
+            interrupts = <8 IRQ_TYPE_NONE>;
+            interrupt-names = "adcdone";
+            #io-channel-cells = <1>;
+        };
+    };
+...
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nuvoton,nau7802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NAU7802 I2c Analog to Digital Converter (ADC)
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: nuvoton,nau7802
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nuvoton,vldo:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Internal reference voltage in millivolts to be configured.
+    minimum: 2400
+    maximum: 4500
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        nau7802@2a {
+            compatible = "nuvoton,nau7802";
+            reg = <0x2a>;
+            nuvoton,vldo = <3000>;
+        };
+    };
+...
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nuvoton,nct7201.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton nct7201 and similar ADCs
+
+maintainers:
+  - Eason Yang <j2anfernee@gmail.com>
+
+description: |
+  The NCT7201/NCT7202 is a Nuvoton Hardware Monitor IC, contains up to 12
+  voltage monitoring channels, with SMBus interface, and up to 4 sets SMBus
+  address selection by ADDR connection. It also provides ALERT# signal for
+  event notification and reset input RSTIN# to recover it from a fault
+  condition.
+
+  NCT7201 contains 8 voltage monitor inputs (VIN1~VIN8).
+  NCT7202 contains 12 voltage monitor inputs (VIN1~VIN12).
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nct7201
+      - nuvoton,nct7202
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      A 3.3V to supply that powers the chip.
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage.
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1d {
+            compatible = "nuvoton,nct7202";
+            reg = <0x1d>;
+            vdd-supply = <&vdd>;
+            vref-supply = <&vref>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
--- a/Show More
+++ b/Show More