Resguardo inicial

linux-7.2.3/Documentation/devicetree/bindings/mtd/partitions/tplink,safeloader-partitions.yaml

@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/tplink,safeloader-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TP-Link SafeLoader partitions
+
+description: |
+  TP-Link home routers store various data on flash (e.g. bootloader,
+  flash layout, firmware, product info, configuration, calibration
+  data). That requires flash partitioning.
+
+  Flash space layout of TP-Link devices is stored on flash itself using
+  a custom ASCII-based format. That format was first found in TP-Link
+  devices with a custom SafeLoader bootloader. Later it was adapted to
+  CFE and U-Boot bootloaders.
+
+  Partitions specified in partitions table cover whole flash space. Some
+  contain static data that shouldn't get modified (device's MAC or WiFi
+  calibration data). Others are semi-static (like kernel). Finally some
+  partitions contain fully changeable content (like rootfs).
+
+  This binding describes partitioning method and defines offset of ASCII
+  based partitions table. That offset is picked at manufacturing process
+  and doesn't change.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: tplink,safeloader-partitions
+
+  partitions-table-offset:
+    description: Flash offset of partitions table
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  "^partition-.*$":
+    $ref: partition.yaml#/$defs/partition-node
+
+required:
+  - partitions-table-offset
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "tplink,safeloader-partitions";
+        partitions-table-offset = <0x100000>;
+
+        partition-file-system {
+                linux,rootfs;
+        };
+    };