Resguardo inicial

2026-09-06 12:53:21 -06:00
parent 662efe3c2a
commit ad2088d178
94853 changed files with 43200404 additions and 0 deletions
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,eliza-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Eliza TLMM block
+
+maintainers:
+  - Abel Vesa <abel.vesa@oss.qualcomm.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm Eliza SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,eliza-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 93
+
+  gpio-line-names:
+    maxItems: 185
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-eliza-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-eliza-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-eliza-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-4])$"
+            - enum: [ ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0,
+                audio_ref_clk, cam_mclk, cci_async_in, cci_i2c_scl,
+                cci_i2c_sda, cci_timer, coex_uart1_rx, coex_uart1_tx,
+                coex_uart2_rx, coex_uart2_tx, dbg_out_clk,
+                ddr_bist_complete, ddr_bist_fail, ddr_bist_start,
+                ddr_bist_stop, ddr_pxi0, ddr_pxi1, dp0_hot, egpio,
+                gcc_gp1, gcc_gp2, gcc_gp3, gnss_adc0, gnss_adc1,
+                hdmi_ddc_scl, hdmi_ddc_sda, hdmi_dtest0, hdmi_dtest1,
+                hdmi_hot_plug, hdmi_pixel_clk, hdmi_rcv_det, hdmi_tx_cec,
+                host2wlan_sol, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws,
+                ibi_i3c, jitter_bist, mdp_esync0_out, mdp_esync1_out,
+                mdp_vsync, mdp_vsync0_out, mdp_vsync11_out,
+                mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out,
+                mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2, nav_gpio3,
+                pcie0_clk_req_n, pcie1_clk_req_n, phase_flag,
+                pll_bist_sync, pll_clk_aux, prng_rosc0, prng_rosc1,
+                prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio_traceclk,
+                qdss_gpio_tracectl, qdss_gpio_tracedata, qlink_big_enable,
+                qlink_big_request, qlink_little_enable,
+                qlink_little_request, qlink_wmss, qspi0, qspi_clk,
+                qspi_cs, qup1_se0, qup1_se1, qup1_se2, qup1_se2_l2_mira,
+                qup1_se2_l2_mirb, qup1_se2_l3_mira, qup1_se2_l3_mirb,
+                qup1_se3, qup1_se4_01, qup1_se4_23,
+                qup1_se5, qup1_se6, qup1_se6_l1_mira,
+                qup1_se6_l1_mirb, qup1_se6_l3_mira, qup1_se6_l3_mirb,
+                qup1_se7, qup1_se7_l0_mira, qup1_se7_l0_mirb,
+                qup1_se7_l1_mira, qup1_se7_l1_mirb, qup2_se0, qup2_se1,
+                qup2_se2, qup2_se3, qup2_se3_l0_mira, qup2_se3_l0_mirb,
+                qup2_se3_l1_mira, qup2_se3_l1_mirb, qup2_se4, qup2_se5,
+                qup2_se6, qup2_se7, resout_gpio, sd_write_protect, sdc1,
+                sdc2, sdc2_fb_clk, tb_trig_sdc1, tb_trig_sdc2,
+                tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
+                tsense_pwm1, tsense_pwm2, tsense_pwm3, tsense_pwm4,
+                uim0_clk, uim0_data, uim0_present, uim0_reset, uim1_clk,
+                uim1_data, uim1_present, uim1_reset, usb0_hs, usb_phy,
+                vfr_0, vfr_1, vsense_trigger_mirnat, wcn_sw_ctrl ]
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,eliza-tlmm";
+        reg = <0x0f100000 0x300000>;
+
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        gpio-ranges = <&tlmm 0 0 186>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        qup-uart14-default-state {
+            pins = "gpio18", "gpio19";
+            function = "qup2_se5";
+            drive-strength = <2>;
+            bias-disable;
+        };
+    };
+...