Resguardo inicial

2026-09-06 12:53:21 -06:00
parent 662efe3c2a
commit ad2088d178
94853 changed files with 43200404 additions and 0 deletions
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/allwinner,sun6i-a31-clock-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Peripheral Reset Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun6i-a31-ahb1-reset
+          - allwinner,sun6i-a31-clock-reset
+
+  # The PRCM on the A31 and A23 will have the reg property missing,
+  # since it's set at the upper level node, and will be validated by
+  # PRCM's schema. Make sure we only validate standalone nodes.
+  required:
+    - compatible
+    - reg
+
+properties:
+  "#reset-cells":
+    const: 1
+    description: >
+      This additional argument passed to that reset controller is the
+      offset of the bit controlling this particular reset line in the
+      register.
+
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-ahb1-reset
+      - allwinner,sun6i-a31-clock-reset
+
+  reg:
+    maxItems: 1
+
+required:
+  - "#reset-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ahb1_rst: reset@1c202c0 {
+        #reset-cells = <1>;
+        compatible = "allwinner,sun6i-a31-ahb1-reset";
+        reg = <0x01c202c0 0xc>;
+    };
+
+  - |
+    apbs_rst: reset@80014b0 {
+        #reset-cells = <1>;
+        compatible = "allwinner,sun6i-a31-clock-reset";
+        reg = <0x080014b0 0x4>;
+    };
+
+...
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/altr,rst-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera SOCFPGA Reset Manager
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - description: Cyclone5/Arria5/Arria10
+        const: altr,rst-mgr
+      - description: Stratix10 ARM64 SoC
+        items:
+          - const: altr,stratix10-rst-mgr
+          - const: altr,rst-mgr
+
+  reg:
+    maxItems: 1
+
+  altr,modrst-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset of the first modrst register
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: altr,stratix10-rst-mgr
+then:
+  properties:
+    altr,modrst-offset: false
+
+additionalProperties: false
+
+examples:
+  - |
+    rstmgr@ffd05000 {
+        compatible = "altr,rst-mgr";
+        reg = <0xffd05000 0x1000>;
+        altr,modrst-offset = <0x10>;
+        #reset-cells = <1>;
+    };
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/amlogic,meson-axg-audio-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic audio memory arbiter controller
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+description: The Amlogic Audio ARB is a simple device which enables or disables
+  the access of Audio FIFOs to DDR on AXG based SoC.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-axg-audio-arb
+      - amlogic,meson-sm1-audio-arb
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: |
+      phandle to the fifo peripheral clock provided by the audio clock
+      controller.
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    // on the A113 SoC:
+    #include <dt-bindings/clock/axg-audio-clkc.h>
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        arb: reset-controller@280 {
+            compatible = "amlogic,meson-axg-audio-arb";
+            reg = <0x0 0x280 0x0 0x4>;
+            #reset-cells = <1>;
+            clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+        };
+    };
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/amlogic,meson-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SoC Reset Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - amlogic,meson8b-reset # Reset Controller on Meson8b and compatible SoCs
+          - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs
+          - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
+          - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
+          - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
+          - amlogic,c3-reset # Reset Controller on C3 and compatible SoCs
+          - amlogic,t7-reset
+      - items:
+          - enum:
+              - amlogic,a4-reset
+              - amlogic,a5-reset
+          - const: amlogic,meson-s4-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@c884404 {
+          compatible = "amlogic,meson-gxbb-reset";
+          reg = <0xc884404 0x20>;
+          #reset-cells = <1>;
+    };
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/atmel,at91sam9260-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel/Microchip System Reset Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  The system reset controller can be used to reset the CPU. In case of
+  SAMA7G5 it can also reset some devices (e.g. USB PHYs).
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91sam9260-rstc
+              - atmel,at91sam9g45-rstc
+              - atmel,sama5d3-rstc
+              - microchip,sam9x60-rstc
+              - microchip,sama7g5-rstc
+      - items:
+          - const: microchip,sama7d65-rstc
+          - const: microchip,sama7g5-rstc
+      - items:
+          - const: atmel,sama5d3-rstc
+          - const: atmel,at91sam9g45-rstc
+      - items:
+          - enum:
+              - microchip,sam9x7-rstc
+          - const: microchip,sam9x60-rstc
+
+  reg:
+    minItems: 1
+    items:
+      - description: base registers for system reset control
+      - description: registers for device specific reset control
+
+  clocks:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,sama7g5-rstc
+    then:
+      required:
+        - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+
+    reset-controller@fffffd00 {
+        compatible = "atmel,at91sam9260-rstc";
+        reg = <0xfffffd00 0x10>;
+        clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+    };
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Manivannan Sadhasivam <mani@kernel.org>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/bitmain,bm1880-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bitmain BM1880 SoC Reset Controller
+
+maintainers:
+  - Manivannan Sadhasivam <mani@kernel.org>
+
+properties:
+  compatible:
+    const: bitmain,bm1880-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rst: reset-controller@c00 {
+        compatible = "bitmain,bm1880-reset";
+        reg = <0xc00 0x8>;
+        #reset-cells = <1>;
+    };
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/brcm,bcm4908-misc-pcie-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom MISC block PCIe reset controller
+
+description: This document describes reset controller handling PCIe PERST#
+  signals. On BCM4908 it's a part of the MISC block.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: brcm,bcm4908-misc-pcie-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    description: PCIe core id
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@ff802644 {
+        compatible = "brcm,bcm4908-misc-pcie-reset";
+        reg = <0xff802644 0x04>;
+        #reset-cells = <1>;
+    };
@@ -0,0 +1,19 @@
+Broadcom BCM63138 Processor Monitor Bus binding
+===============================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Require properties:
+
+- compatible: must be "brcm,bcm63138-pmb"
+- reg: base register address and size for this bus controller
+- #reset-cells: must be 2 first cell is the address within the bus instance designated
+  by the phandle, and the second is the number of zones for this peripheral
+
+Example:
+	pmb0: reset-controller@4800c0 {
+		compatible = "brcm,bcm63138-pmb";
+		reg = <0x4800c0 0x10>;
+		#reset-cells = <2>;
+	};
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/brcm,bcm6345-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM6345 reset controller
+
+description: This document describes the BCM6345 reset controller.
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6345-reset
+      - brcm,bcm63xx-ephy-ctrl
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@10000010 {
+      compatible = "brcm,bcm6345-reset";
+      reg = <0x10000010 0x4>;
+      #reset-cells = <1>;
+    };
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Broadcom
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/brcm,bcm7216-pcie-sata-rescal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM7216 RESCAL reset controller
+
+description: This document describes the BCM7216 RESCAL reset controller
+  which is responsible for controlling the reset of the SATA and PCIe0/1
+  instances on BCM7216.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Jim Quinlan <jim2101024@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm7216-pcie-sata-rescal
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@8b2c800 {
+          compatible = "brcm,bcm7216-pcie-sata-rescal";
+          reg = <0x8b2c800 0x10>;
+          #reset-cells = <0>;
+    };
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/brcm,brcmstb-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB SW_INIT-style reset controller
+
+description:
+  Broadcom STB SoCs have a SW_INIT-style reset controller with separate
+  SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit
+  reset lines.
+
+  Please also refer to reset.txt in this directory for common reset
+  controller binding usage.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,brcmstb-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@8404318 {
+      compatible = "brcm,brcmstb-reset";
+      reg = <0x8404318 0x30>;
+      #reset-cells = <1>;
+    };
+
+    ethernet_switch {
+      resets = <&reset 26>;
+      reset-names = "switch";
+    };
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/canaan,k210-rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 Reset Controller
+
+maintainers:
+  - Damien Le Moal <dlemoal@kernel.org>
+
+description: |
+  Canaan Kendryte K210 reset controller driver which supports the SoC
+  system controller supplied reset registers for the various peripherals
+  of the SoC. The K210 reset controller node must be defined as a child
+  node of the K210 system controller node.
+
+  See also:
+  - dt-bindings/reset/k210-rst.h
+
+properties:
+  compatible:
+    const: canaan,k210-rst
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - '#reset-cells'
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/k210-rst.h>
+    sysrst: reset-controller {
+      compatible = "canaan,k210-rst";
+      #reset-cells = <1>;
+    };
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/canaan,k230-rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K230 Reset Controller
+
+maintainers:
+  - Junhui Liu <junhui.liu@pigmoral.tech>
+
+description:
+  The Canaan Kendryte K230 reset controller is part of the SoC's system
+  controller and controls the reset registers for CPUs and various peripherals.
+
+properties:
+  compatible:
+    const: canaan,k230-rst
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@91101000 {
+      compatible = "canaan,k230-rst";
+      reg = <0x91101000 0x1000>;
+      #reset-cells = <1>;
+    };
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/delta,tn48m-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD reset controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  This module is part of the Delta TN48M multi-function device. For more
+  details see ../mfd/delta,tn48m-cpld.yaml.
+
+  Reset controller modules provides resets for the following:
+  * 88F7040 SoC
+  * 88F6820 SoC
+  * 98DX3265 switch MAC-s
+  * 88E1680 PHY-s
+  * 88E1512 PHY
+  * PoE PSE controller
+
+properties:
+  compatible:
+    const: delta,tn48m-reset
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#reset-cells"
+
+additionalProperties: false
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/eswin,eic7700-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ESWIN EIC7700 SoC reset controller
+
+maintainers:
+  - Yifeng Huang <huangyifeng@eswincomputing.com>
+  - Xuyang Dong <dongxuyang@eswincomputing.com>
+
+description:
+  The system reset controller can be used to reset various peripheral
+  controllers in ESWIN eic7700 SoC.
+
+properties:
+  compatible:
+    const: eswin,eic7700-reset
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/eswin,eic7700-reset.h>
+
+    reset-controller@51828300 {
+        compatible = "eswin,eic7700-reset";
+        reg = <0x51828300 0x200>;
+        #reset-cells = <1>;
+    };
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/fsl,imx-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX System Reset Controller
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  The system reset controller can be used to reset the GPU, VPU,
+  IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device
+  nodes should specify the reset line on the SRC in their resets
+  property, containing a phandle to the SRC device node and a
+  RESET_INDEX specifying which module to reset, as described in
+  reset.txt
+
+  The following RESET_INDEX values are valid for i.MX5:
+    GPU_RESET     0
+    VPU_RESET     1
+    IPU1_RESET    2
+    OPEN_VG_RESET 3
+  The following additional RESET_INDEX value is valid for i.MX6:
+    IPU2_RESET    4
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx51-src
+      - items:
+          - enum:
+              - fsl,imx50-src
+              - fsl,imx53-src
+              - fsl,imx6q-src
+              - fsl,imx6sx-src
+              - fsl,imx6sl-src
+              - fsl,imx6ul-src
+              - fsl,imx6sll-src
+          - const: fsl,imx51-src
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: SRC interrupt
+      - description: CPU WDOG interrupts out of SRC
+    minItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@73fd0000 {
+        compatible = "fsl,imx51-src";
+        reg = <0x73fd0000 0x4000>;
+        interrupts = <75>;
+        #reset-cells = <1>;
+    };
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/fsl,imx7-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7 System Reset Controller
+
+maintainers:
+  - Andrey Smirnov <andrew.smirnov@gmail.com>
+
+description: |
+  The system reset controller can be used to reset various set of
+  peripherals. Device nodes that need access to reset lines should
+  specify them as a reset phandle in their corresponding node as
+  specified in reset.txt.
+
+  For list of all valid reset indices see
+    <dt-bindings/reset/imx7-reset.h> for i.MX7,
+    <dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ, i.MX8MM and i.MX8MN,
+    <dt-bindings/reset/imx8mp-reset.h> for i.MX8MP.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx7d-src
+              - fsl,imx8mq-src
+              - fsl,imx8mp-src
+          - const: syscon
+      - items:
+          - enum:
+              - fsl,imx8mm-src
+              - fsl,imx8mn-src
+          - const: fsl,imx8mq-src
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    reset-controller@30390000 {
+        compatible = "fsl,imx7d-src", "syscon";
+        reg = <0x30390000 0x2000>;
+        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        #reset-cells = <1>;
+    };
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/hisilicon,hi3660-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon System Reset Controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  Please also refer to reset.txt in this directory for common reset
+  controller binding usage.
+  The reset controller registers are part of the system-ctl block on
+  hi3660 and hi3670 SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: hisilicon,hi3660-reset
+      - items:
+          - const: hisilicon,hi3670-reset
+          - const: hisilicon,hi3660-reset
+
+  hisi,rst-syscon:
+    deprecated: true
+    description: phandle of the reset's syscon, use hisilicon,rst-syscon instead
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  hisilicon,rst-syscon:
+    description: phandle of the reset's syscon.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  '#reset-cells':
+    description: |
+      Specifies the number of cells needed to encode a reset source.
+      Cell #1 : offset of the reset assert control register from the syscon
+                register base
+                offset + 4: deassert control register
+                offset + 8: status control register
+      Cell #2 : bit position of the reset in the reset control register
+    const: 2
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    iomcu_rst_controller {
+        compatible = "hisilicon,hi3660-reset";
+        hisilicon,rst-syscon = <&iomcu>;
+        #reset-cells = <2>;
+    };
+...
@@ -0,0 +1,55 @@
+Pistachio Reset Controller
+=============================================================================
+
+This binding describes a reset controller device that is used to enable and
+disable individual IP blocks within the Pistachio SoC using "soft reset"
+control bits found in the Pistachio SoC top level registers.
+
+The actual action taken when soft reset is asserted is hardware dependent.
+However, when asserted it may not be possible to access the hardware's
+registers, and following an assert/deassert sequence the hardware's previous
+state may no longer be valid.
+
+Please refer to Documentation/devicetree/bindings/reset/reset.txt
+for common reset controller binding usage.
+
+Required properties:
+
+- compatible: Contains "img,pistachio-reset"
+
+- #reset-cells: Contains 1
+
+Example:
+
+	cr_periph: clk@18148000 {
+		compatible = "img,pistachio-cr-periph", "syscon", "simple-mfd";
+		reg = <0x18148000 0x1000>;
+		clocks = <&clk_periph PERIPH_CLK_SYS>;
+		clock-names = "sys";
+		#clock-cells = <1>;
+
+		pistachio_reset: reset-controller {
+			compatible = "img,pistachio-reset";
+			#reset-cells = <1>;
+		};
+	};
+
+Specifying reset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the pistachio reset device node and an
+index specifying which reset to use, as described in
+Documentation/devicetree/bindings/reset/reset.txt.
+
+Example:
+
+	spdif_out: spdif-out@18100d00 {
+		...
+		resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>;
+		reset-names = "rst";
+		...
+	};
+
+Macro definitions for the supported resets can be found in:
+include/dt-bindings/reset/pistachio-resets.h
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/intel,rcu-gw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Reset Controller on Intel Gateway SoCs
+
+maintainers:
+  - Dilip Kota <eswara.kota@linux.intel.com>
+
+properties:
+  compatible:
+    enum:
+      - intel,rcu-lgm
+      - intel,rcu-xrx200
+
+  reg:
+    description: Reset controller registers.
+    maxItems: 1
+
+  intel,global-reset:
+    description: Global reset register offset and bit offset.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: Register offset
+      - description: Register bit offset
+        minimum: 0
+        maximum: 31
+
+  "#reset-cells":
+    minimum: 2
+    maximum: 3
+    description: |
+      First cell is reset request register offset.
+      Second cell is bit offset in reset request register.
+      Third cell is bit offset in reset status register.
+      For LGM SoC, reset cell count is 2 as bit offset in
+      reset request and reset status registers is same. Whereas
+      3 for legacy SoCs as bit offset differs.
+
+required:
+  - compatible
+  - reg
+  - intel,global-reset
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rcu0: reset-controller@e0000000 {
+        compatible = "intel,rcu-lgm";
+        reg = <0xe0000000 0x20000>;
+        intel,global-reset = <0x10 30>;
+        #reset-cells = <2>;
+    };
+
+    pwm: pwm@e0d00000 {
+        compatible = "intel,lgm-pwm";
+        reg = <0xe0d00000 0x30>;
+        clocks = <&cgu0 1>;
+        #pwm-cells = <2>;
+        resets = <&rcu0 0x30 21>;
+    };
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/lantiq,reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq XWAY SoC RCU reset controller
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |
+  This binding describes a reset-controller found on the RCU module on Lantiq
+  XWAY SoCs. This node has to be a sub node of the Lantiq RCU block.
+
+properties:
+  compatible:
+    enum:
+      - lantiq,danube-reset
+      - lantiq,xrx200-reset
+
+  reg:
+    description: |
+      Defines the following sets of registers in the parent syscon device
+      Offset of the reset set register
+      Offset of the reset status register
+    maxItems: 2
+
+  '#reset-cells':
+    description: |
+      The first cell takes the reset set bit and the second cell takes the
+      status bit.
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // On the xRX200 SoCs:
+    reset0: reset-controller@10 {
+        compatible = "lantiq,xrx200-reset";
+        reg = <0x10 0x04>, <0x14 0x04>;
+        #reset-cells = <2>;
+    };
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2015 Antoine Tenart <atenart@kernel.org>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/marvell,berlin2-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Berlin reset controller
+
+maintainers:
+  - Antoine Tenart <atenart@kernel.org>
+
+description: The reset controller node must be a sub-node of the chip
+  controller node on Berlin SoCs.
+
+properties:
+  compatible:
+    const: marvell,berlin2-reset
+
+  "#reset-cells":
+    const: 2
+
+required:
+  - compatible
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    chip: chip-control@ea0000 {
+        reg = <0xea0000 0x400>;
+
+        chip_rst: reset {
+            compatible = "marvell,berlin2-reset";
+            #reset-cells = <2>;
+        };
+    };
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/microchip,rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Switch Reset Controller
+
+maintainers:
+  - Steen Hegelund <steen.hegelund@microchip.com>
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  The Microchip Sparx5 Switch provides reset control and implements the following
+  functions
+    - One Time Switch Core Reset (Soft Reset)
+
+properties:
+  $nodename:
+    pattern: "^reset-controller@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - microchip,sparx5-switch-reset
+          - microchip,lan966x-switch-reset
+      - items:
+          - enum:
+              - microchip,lan9691-switch-reset
+          - const: microchip,lan966x-switch-reset
+
+  reg:
+    items:
+      - description: global control block registers
+
+  reg-names:
+    items:
+      - const: gcb
+
+  "#reset-cells":
+    const: 1
+
+  cpu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: syscon used to access CPU reset
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#reset-cells"
+  - cpu-syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@11010008 {
+        compatible = "microchip,sparx5-switch-reset";
+        reg = <0x11010008 0x4>;
+        reg-names = "gcb";
+        #reset-cells = <1>;
+        cpu-syscon = <&cpu_ctrl>;
+    };
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/nuvoton,ma35d1-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Reset Controller
+
+maintainers:
+  - Chi-Fang Li <cfli0@nuvoton.com>
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+description:
+  The system reset controller can be used to reset various peripheral
+  controllers in MA35D1 SoC.
+
+properties:
+  compatible:
+    items:
+      - const: nuvoton,ma35d1-reset
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  # system reset controller node:
+  - |
+
+    system-management@40460000 {
+        compatible = "nuvoton,ma35d1-reset", "syscon";
+        reg = <0x40460000 0x200>;
+        #reset-cells = <1>;
+    };
+...
+
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/nuvoton,npcm750-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM Reset controller
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-reset        # Poleg NPCM7XX SoC
+      - nuvoton,npcm845-reset        # Arbel NPCM8XX SoC
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: specify external 25MHz reference clock.
+
+  nuvoton,sysgcr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to access GCR registers.
+
+  nuvoton,sw-reset-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+    description: |
+      Contains the software reset number to restart the SoC.
+      If not specified, software reset is disabled.
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+  - nuvoton,sysgcr
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - nuvoton,npcm845-reset
+then:
+  required:
+    - '#clock-cells'
+    - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
+    rstc: rstc@f0801000 {
+        compatible = "nuvoton,npcm750-reset";
+        reg = <0xf0801000 0x70>;
+        #reset-cells = <2>;
+        nuvoton,sysgcr = <&gcr>;
+        nuvoton,sw-reset-number = <2>;
+    };
+
+    // Specifying reset lines connected to IP NPCM7XX modules
+    spi0: spi {
+        resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
+    };
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/nxp,lpc1850-rgu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1850  Reset Generation Unit (RGU)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: nxp,lpc1850-rgu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: delay
+      - const: reg
+
+  '#reset-cells':
+    const: 1
+    description: |
+      See table below for valid peripheral reset numbers. Numbers not
+      in the table below are either reserved or not applicable for
+      normal operation.
+
+      Reset	Peripheral
+        9	System control unit (SCU)
+       12	ARM Cortex-M0 subsystem core (LPC43xx only)
+       13	CPU core
+       16	LCD controller
+       17	USB0
+       18	USB1
+       19	DMA
+       20	SDIO
+       21	External memory controller (EMC)
+       22	Ethernet
+       25	Flash bank A
+       27	EEPROM
+       28	GPIO
+       29	Flash bank B
+       32	Timer0
+       33	Timer1
+       34	Timer2
+       35	Timer3
+       36	Repetitive Interrupt timer (RIT)
+       37	State Configurable Timer (SCT)
+       38	Motor control PWM (MCPWM)
+       39	QEI
+       40	ADC0
+       41	ADC1
+       42	DAC
+       44	USART0
+       45	UART1
+       46	USART2
+       47	USART3
+       48	I2C0
+       49	I2C1
+       50	SSP0
+       51	SSP1
+       52	I2S0 and I2S1
+       53	Serial Flash Interface (SPIFI)
+       54	C_CAN1
+       55	C_CAN0
+       56	ARM Cortex-M0 application core (LPC4370 only)
+       57	SGPIO (LPC43xx only)
+       58	SPI (LPC43xx only)
+       60	ADCHS (12-bit ADC) (LPC4370 only)
+
+      Refer to NXP LPC18xx or LPC43xx user manual for more details about
+      the reset signals and the connected block/peripheral.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc18xx-ccu.h>
+    #include <dt-bindings/clock/lpc18xx-cgu.h>
+
+    reset-controller@40053000 {
+        compatible = "nxp,lpc1850-rgu";
+        reg = <0x40053000 0x1000>;
+        clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
+        clock-names = "delay", "reg";
+        #reset-cells = <1>;
+    };
+
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2015 Alban Bedel <albeu@free.fr>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/qca,ar7100-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR7xxx/AR9XXX reset controller
+
+maintainers:
+  - Alban Bedel <albeu@free.fr>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qca,ar9132-reset
+          - qca,ar9331-reset
+      - const: qca,ar7100-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@1806001c {
+          compatible = "qca,ar9132-reset", "qca,ar7100-reset";
+          reg = <0x1806001c 0x4>;
+          #reset-cells = <1>;
+    };
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/qcom,aoss-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm AOSS Reset Controller
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  The bindings describe the reset-controller found on AOSS-CC (always on
+  subsystem) for Qualcomm Technologies Inc SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - description: on SC7180 SoCs the following compatibles must be specified
+        items:
+          - const: qcom,sc7180-aoss-cc
+          - const: qcom,sdm845-aoss-cc
+
+      - description: on SC7280 SoCs the following compatibles must be specified
+        items:
+          - const: qcom,sc7280-aoss-cc
+          - const: qcom,sdm845-aoss-cc
+
+      - description: on SDM845 SoCs the following compatibles must be specified
+        items:
+          - const: qcom,sdm845-aoss-cc
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    aoss_reset: reset-controller@c2a0000 {
+      compatible = "qcom,sdm845-aoss-cc";
+      reg = <0xc2a0000 0x31000>;
+      #reset-cells = <1>;
+    };
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/qcom,pdc-global.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PDC Global
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  The bindings describes the reset-controller found on PDC-Global (Power Domain
+  Controller) block for Qualcomm Technologies Inc SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - description: on SC7180 SoCs the following compatibles must be specified
+        items:
+          - const: qcom,sc7180-pdc-global
+          - const: qcom,sdm845-pdc-global
+
+      - description: on SC7280 SoCs the following compatibles must be specified
+        items:
+          - const: qcom,sc7280-pdc-global
+
+      - description: on SDM845 SoCs the following compatibles must be specified
+        items:
+          - const: qcom,sdm845-pdc-global
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    pdc_reset: reset-controller@b2e0000 {
+      compatible = "qcom,sdm845-pdc-global";
+      reg = <0xb2e0000 0x20000>;
+      #reset-cells = <1>;
+    };
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/renesas,rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car and RZ/G Reset Controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+  The R-Car and RZ/G Reset Controllers provide reset control, and implement the
+  following functions:
+    - Latching of the levels on mode pins when PRESET# is negated,
+    - Mode monitoring register,
+    - Reset control of peripheral devices (on R-Car Gen1),
+    - Watchdog timer (on R-Car Gen1),
+    - Register-based reset control and boot address registers for the various
+      CPU cores (on R-Car Gen2 and Gen3, and on RZ/G).
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a7742-rst       # RZ/G1H
+      - renesas,r8a7743-rst       # RZ/G1M
+      - renesas,r8a7744-rst       # RZ/G1N
+      - renesas,r8a7745-rst       # RZ/G1E
+      - renesas,r8a77470-rst      # RZ/G1C
+      - renesas,r8a774a1-rst      # RZ/G2M
+      - renesas,r8a774a3-rst      # RZ/G2M v3.0
+      - renesas,r8a774b1-rst      # RZ/G2N
+      - renesas,r8a774c0-rst      # RZ/G2E
+      - renesas,r8a774e1-rst      # RZ/G2H
+      - renesas,r8a7778-reset-wdt # R-Car M1A
+      - renesas,r8a7779-reset-wdt # R-Car H1
+      - renesas,r8a7790-rst       # R-Car H2
+      - renesas,r8a7791-rst       # R-Car M2-W
+      - renesas,r8a7792-rst       # R-Car V2H
+      - renesas,r8a7793-rst       # R-Car M2-N
+      - renesas,r8a7794-rst       # R-Car E2
+      - renesas,r8a7795-rst       # R-Car H3
+      - renesas,r8a7796-rst       # R-Car M3-W
+      - renesas,r8a77961-rst      # R-Car M3-W+
+      - renesas,r8a77965-rst      # R-Car M3-N
+      - renesas,r8a77970-rst      # R-Car V3M
+      - renesas,r8a77980-rst      # R-Car V3H
+      - renesas,r8a77990-rst      # R-Car E3
+      - renesas,r8a77995-rst      # R-Car D3
+      - renesas,r8a779a0-rst      # R-Car V3U
+      - renesas,r8a779f0-rst      # R-Car S4-8
+      - renesas,r8a779g0-rst      # R-Car V4H
+      - renesas,r8a779h0-rst      # R-Car V4M
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rst: reset-controller@e6160000 {
+            compatible = "renesas,r8a7795-rst";
+            reg = <0xe6160000 0x0200>;
+    };
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/renesas,rzg2l-usbphy-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,V2L} USBPHY Control
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description:
+  The RZ/G2L USBPHY Control mainly controls reset and power down of the
+  USB/PHY.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL and RZ/Five
+              - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC}
+              - renesas,r9a07g054-usbphy-ctrl # RZ/V2L
+          - const: renesas,rzg2l-usbphy-ctrl
+      - const: renesas,r9a08g045-usbphy-ctrl # RZ/G3S
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+    description: |
+      The phandle's argument in the reset specifier is the PHY reset associated
+      with the USB port.
+      0 = Port 1 Phy reset
+      1 = Port 2 Phy reset
+
+  regulator-vbus:
+    type: object
+    description: USB VBUS regulator
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+  renesas,sysc-pwrrdy:
+    description:
+      The system controller PWRRDY indicates to the USB PHY if the power supply
+      is ready. PWRRDY needs to be set during power-on before applying any
+      other settings. It also needs to be set before powering off the USB.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description:
+              System controller phandle required by USB PHY CTRL driver to set
+              PWRRDY
+          - description: Register offset associated with PWRRDY
+          - description: Register bitmask associated with PWRRDY
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - power-domains
+  - '#reset-cells'
+  - regulator-vbus
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a08g045-usbphy-ctrl
+    then:
+      required:
+        - renesas,sysc-pwrrdy
+    else:
+      properties:
+        renesas,sysc-pwrrdy: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    phyrst: usbphy-ctrl@11c40000 {
+        compatible = "renesas,r9a07g044-usbphy-ctrl",
+                     "renesas,rzg2l-usbphy-ctrl";
+        reg = <0x11c40000 0x10000>;
+        clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>;
+        resets = <&cpg R9A07G044_USB_PRESETN>;
+        power-domains = <&cpg>;
+        #reset-cells = <1>;
+        regulator-vbus {
+            regulator-name = "vbus";
+        };
+    };
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/renesas,rzv2h-usb2phy-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2H(P) USB2PHY Port reset Control
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The RZ/V2H(P) USB2PHY Control mainly controls Port reset and power down of the
+  USB2.0 PHY.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a09g047-usb2phy-reset # RZ/G3E
+              - renesas,r9a09g056-usb2phy-reset # RZ/V2N
+          - const: renesas,r9a09g057-usb2phy-reset
+
+      - const: renesas,r9a09g057-usb2phy-reset # RZ/V2H(P)
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 0
+
+  '#mux-state-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - power-domains
+  - '#reset-cells'
+  - '#mux-state-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas,r9a09g057-cpg.h>
+
+    reset-controller@15830000 {
+        compatible = "renesas,r9a09g057-usb2phy-reset";
+        reg = <0x15830000 0x10000>;
+        clocks = <&cpg CPG_MOD 0xb6>;
+        resets = <&cpg 0xaf>;
+        power-domains = <&cpg>;
+        #reset-cells = <0>;
+        #mux-state-cells = <1>;
+    };
@@ -0,0 +1,75 @@
+= Reset Signal Device Tree Bindings =
+
+This binding is intended to represent the hardware reset signals present
+internally in most IC (SoC, FPGA, ...) designs. Reset signals for whole
+standalone chips are most likely better represented as GPIOs, although there
+are likely to be exceptions to this rule.
+
+Hardware blocks typically receive a reset signal. This signal is generated by
+a reset provider (e.g. power management or clock module) and received by a
+reset consumer (the module being reset, or a module managing when a sub-
+ordinate module is reset). This binding exists to represent the provider and
+consumer, and provide a way to couple the two together.
+
+A reset signal is represented by the phandle of the provider, plus a reset
+specifier - a list of DT cells that represents the reset signal within the
+provider. The length (number of cells) and semantics of the reset specifier
+are dictated by the binding of the reset provider, although common schemes
+are described below.
+
+A word on where to place reset signal consumers in device tree: It is possible
+in hardware for a reset signal to affect multiple logically separate HW blocks
+at once. In this case, it would be unwise to represent this reset signal in
+the DT node of each affected HW block, since if activated, an unrelated block
+may be reset. Instead, reset signals should be represented in the DT node
+where it makes most sense to control it; this may be a bus node if all
+children of the bus are affected by the reset signal, or an individual HW
+block node for dedicated reset signals. The intent of this binding is to give
+appropriate software access to the reset signals in order to manage the HW,
+rather than to slavishly enumerate the reset signal that affects each HW
+block.
+
+= Reset providers =
+
+Required properties:
+#reset-cells:	Number of cells in a reset specifier; Typically 0 for nodes
+		with a single reset output and 1 for nodes with multiple
+		reset outputs.
+
+For example:
+
+	rst: reset-controller {
+		#reset-cells = <1>;
+	};
+
+= Reset consumers =
+
+Required properties:
+resets:		List of phandle and reset specifier pairs, one pair
+		for each reset signal that affects the device, or that the
+		device manages. Note: if the reset provider specifies '0' for
+		#reset-cells, then only the phandle portion of the pair will
+		appear.
+
+Optional properties:
+reset-names:	List of reset signal name strings sorted in the same order as
+		the resets property. Consumers drivers will use reset-names to
+		match reset signal names with reset specifiers.
+
+For example:
+
+	device {
+		resets = <&rst 20>;
+		reset-names = "reset";
+	};
+
+This represents a device with a single reset signal named "reset".
+
+	bus {
+		resets = <&rst 10> <&rst 11> <&rst 12> <&rst 11>;
+		reset-names = "i2s1", "i2s2", "dma", "mixer";
+	};
+
+This represents a bus that controls the reset signal of each of four sub-
+ordinate devices. Consider for example a bus that fails to operate unless no
+child device has reset asserted.
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/snps,axs10x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXS10x reset controller
+
+maintainers:
+  - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+
+description: |
+  This binding describes the ARC AXS10x boards custom IP-block which allows
+  to control reset signals of selected peripherals. For example DW GMAC, etc...
+  This block is controlled via memory-mapped register (AKA CREG) which
+  represents up-to 32 reset lines.
+  As of today only the following lines are used:
+   - DW GMAC - line 5
+
+properties:
+  compatible:
+    const: snps,axs10x-reset
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@11220 {
+        compatible = "snps,axs10x-reset";
+        #reset-cells = <1>;
+        reg = <0x11220 0x4>;
+    };
+
+    // Specifying reset lines connected to IP modules:
+    ethernet {
+        resets = <&reset 5>;
+    };
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/snps,dw-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare Reset controller
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+properties:
+  compatible:
+    enum:
+      - snps,dw-high-reset
+      - snps,dw-low-reset
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+  reset-controller: true
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@0 {
+        compatible = "snps,dw-high-reset";
+        reg = <0x0000 0x4>;
+        #reset-cells = <1>;
+    };
@@ -0,0 +1,28 @@
+Binding for the Synopsys HSDK reset controller
+
+This binding uses the common reset binding[1].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+
+Required properties:
+- compatible: should be "snps,hsdk-reset".
+- reg: should always contain 2 pairs address - length: first for reset
+  configuration register and second for corresponding SW reset and status bits
+  register.
+- #reset-cells: from common reset binding; Should always be set to 1.
+
+Example:
+	reset: reset@880 {
+		compatible = "snps,hsdk-reset";
+		#reset-cells = <1>;
+		reg = <0x8A0 0x4>, <0xFF0 0x4>;
+	};
+
+Specifying reset lines connected to IP modules:
+	ethernet@.... {
+		....
+		resets = <&reset HSDK_V1_ETH_RESET>;
+		....
+	};
+
+The index could be found in <dt-bindings/reset/snps,hsdk-reset.h>
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/socionext,uniphier-glue-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier peripheral core reset in glue layer
+
+description: |
+  Some peripheral core reset belongs to its own glue layer. Before using
+  this core reset, it is necessary to control the clocks and resets to
+  enable this layer. These clocks and resets should be described in each
+  property.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-usb3-reset
+      - socionext,uniphier-pro5-usb3-reset
+      - socionext,uniphier-pxs2-usb3-reset
+      - socionext,uniphier-ld20-usb3-reset
+      - socionext,uniphier-pxs3-usb3-reset
+      - socionext,uniphier-nx1-usb3-reset
+      - socionext,uniphier-pro4-ahci-reset
+      - socionext,uniphier-pxs2-ahci-reset
+      - socionext,uniphier-pxs3-ahci-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pro4-usb3-reset
+              - socionext,uniphier-pro5-usb3-reset
+              - socionext,uniphier-pro4-ahci-reset
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          maxItems: 1
+        reset-names:
+          const: link
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    usb_rst: reset-controller@0 {
+        compatible = "socionext,uniphier-ld20-usb3-reset";
+        reg = <0x0 0x4>;
+        #reset-cells = <1>;
+        clock-names = "link";
+        clocks = <&sys_clk 14>;
+        reset-names = "link";
+        resets = <&sys_rst 14>;
+    };
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/socionext,uniphier-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier reset controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: System reset
+        enum:
+          - socionext,uniphier-ld4-reset
+          - socionext,uniphier-pro4-reset
+          - socionext,uniphier-sld8-reset
+          - socionext,uniphier-pro5-reset
+          - socionext,uniphier-pxs2-reset
+          - socionext,uniphier-ld6b-reset
+          - socionext,uniphier-ld11-reset
+          - socionext,uniphier-ld20-reset
+          - socionext,uniphier-pxs3-reset
+          - socionext,uniphier-nx1-reset
+      - description: Media I/O (MIO) reset, SD reset
+        enum:
+          - socionext,uniphier-ld4-mio-reset
+          - socionext,uniphier-pro4-mio-reset
+          - socionext,uniphier-sld8-mio-reset
+          - socionext,uniphier-pro5-sd-reset
+          - socionext,uniphier-pxs2-sd-reset
+          - socionext,uniphier-ld11-mio-reset
+          - socionext,uniphier-ld11-sd-reset
+          - socionext,uniphier-ld20-sd-reset
+          - socionext,uniphier-pxs3-sd-reset
+          - socionext,uniphier-nx1-sd-reset
+      - description: Peripheral reset
+        enum:
+          - socionext,uniphier-ld4-peri-reset
+          - socionext,uniphier-pro4-peri-reset
+          - socionext,uniphier-sld8-peri-reset
+          - socionext,uniphier-pro5-peri-reset
+          - socionext,uniphier-pxs2-peri-reset
+          - socionext,uniphier-ld11-peri-reset
+          - socionext,uniphier-ld20-peri-reset
+          - socionext,uniphier-pxs3-peri-reset
+          - socionext,uniphier-nx1-peri-reset
+      - description: Analog signal amplifier reset
+        enum:
+          - socionext,uniphier-ld11-adamv-reset
+          - socionext,uniphier-ld20-adamv-reset
+
+  "#reset-cells":
+    const: 1
+
+  resets:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#reset-cells"
+
+examples:
+  - |
+    reset-controller {
+        compatible = "socionext,uniphier-ld11-reset";
+        #reset-cells = <1>;
+    };
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/sophgo,sg2042-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 SoC Reset Controller
+
+maintainers:
+  - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sophgo,sg2044-reset
+          - const: sophgo,sg2042-reset
+      - enum:
+          - sophgo,cv1800b-reset
+          - sophgo,sg2042-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rstgen: reset-controller@c00 {
+        compatible = "sophgo,sg2042-reset";
+        reg = <0xc00 0xc>;
+        #reset-cells = <1>;
+    };
@@ -0,0 +1,44 @@
+STMicroelectronics STi family Sysconfig Peripheral SoftReset Controller
+=============================================================================
+
+This binding describes a reset controller device that is used to enable and
+disable on-chip peripheral controllers such as USB and SATA, using
+"softreset" control bits found in the STi family SoC system configuration
+registers.
+
+The actual action taken when softreset is asserted is hardware dependent.
+However, when asserted it may not be possible to access the hardware's
+registers and after an assert/deassert sequence the hardware's previous state
+may no longer be valid.
+
+Please refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "st,stih407-softreset";
+- #reset-cells: 1, see below
+
+example:
+
+	softreset: softreset-controller {
+		#reset-cells = <1>;
+		compatible = "st,stih407-softreset";
+	};
+
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the softreset device node and an
+index specifying which channel to use, as described in reset.txt
+
+example:
+
+	ethernet0{
+		resets			= <&softreset STIH415_ETH0_SOFTRESET>;
+	};
+
+Macro definitions for the supported reset channels can be found in:
+
+include/dt-bindings/reset/stih407-resets.h
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/st,stih407-picophyreset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi family Sysconfig Picophy SoftReset Controller
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+  This binding describes a reset controller device that is used to enable and
+  disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in
+  the STi family SoC system configuration registers.
+
+  The actual action taken when softreset is asserted is hardware dependent.
+  However, when asserted it may not be possible to access the hardware's
+  registers and after an assert/deassert sequence the hardware's previous state
+  may no longer be valid.
+
+properties:
+  compatible:
+    const: st,stih407-picophyreset
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    picophyreset: picophyreset-controller {
+        compatible = "st,stih407-picophyreset";
+        #reset-cells = <1>;
+    };
+
+    // Specifying picophyreset control of devices
+    usb2_picophy0: usbpicophy {
+        resets = <&picophyreset STIH407_PICOPHY0_RESET>;
+    };
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/st,stih407-powerdown.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@st.com>
+
+description: |
+  This binding describes a reset controller device that is used to enable and
+  disable on-chip peripheral controllers such as USB and SATA, using
+  "powerdown" control bits found in the STi family SoC system configuration
+  registers. These have been grouped together into a single reset controller
+  device for convenience.
+
+  The actual action taken when powerdown is asserted is hardware dependent.
+  However, when asserted it may not be possible to access the hardware's
+  registers and after an assert/deassert sequence the hardware's previous state
+  may no longer be valid.
+
+properties:
+  compatible:
+    const: st,stih407-powerdown
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    powerdown: powerdown-controller {
+        compatible = "st,stih407-powerdown";
+        #reset-cells = <1>;
+    };
+
+    // Specifying powerdown control of devices:
+    st_dwc3: dwc3 {
+        resets = <&powerdown STIH407_USB3_POWERDOWN>;
+    };
@@ -0,0 +1,6 @@
+STMicroelectronics STM32 Peripheral Reset Controller
+====================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please see Documentation/devicetree/bindings/clock/st,stm32-rcc.yaml
@@ -0,0 +1,6 @@
+STMicroelectronics STM32MP1 Peripheral Reset Controller
+=======================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/starfive,jh7100-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 SoC Reset Controller
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    enum:
+      - starfive,jh7100-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@11840000 {
+        compatible = "starfive,jh7100-reset";
+        reg = <0x11840000 0x10000>;
+        #reset-cells = <1>;
+    };
+
+...
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/sunplus,reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SoC Reset Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rstc: reset@9c000054 {
+      compatible = "sunplus,sp7021-reset";
+      reg = <0x9c000054 0x28>;
+      #reset-cells = <1>;
+    };
+
+...
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/thead,th1520-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-HEAD TH1520 SoC Reset Controller
+
+description:
+  The T-HEAD TH1520 reset controller is a hardware block that asserts/deasserts
+  resets for SoC subsystems.
+
+maintainers:
+  - Michal Wilczynski <m.wilczynski@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - thead,th1520-reset # Reset controller for VO subsystem
+      - thead,th1520-reset-ao
+      - thead,th1520-reset-ap
+      - thead,th1520-reset-dsp
+      - thead,th1520-reset-misc
+      - thead,th1520-reset-vi
+      - thead,th1520-reset-vp
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      rst: reset-controller@ffef528000 {
+        compatible = "thead,th1520-reset";
+        reg = <0xff 0xef528000 0x0 0x1000>;
+        #reset-cells = <1>;
+      };
+    };
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/ti,sci-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-SCI reset controller
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Some TI SoCs contain a system controller (like the Power Management Micro
+  Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
+  the state of the various hardware modules present on the SoC. Communication
+  between the host processor running an OS and the system controller happens
+  through a protocol called TI System Control Interface (TI-SCI protocol).
+
+  This reset controller node uses the TI SCI protocol to perform the reset
+  management of various hardware modules present on the SoC. Must be a child
+  node of the associated TI-SCI system controller node.
+
+properties:
+  $nodename:
+    pattern: "^reset-controller$"
+
+  compatible:
+    const: ti,sci-reset
+
+  "#reset-cells":
+    const: 2
+    description:
+      The two cells represent values that the TI-SCI controller defines.
+
+      The first cell should contain the device ID.
+
+      The second cell should contain the reset mask corresponding to the device
+      used by system controller.
+
+      Please see https://software-dl.ti.com/tisci/esd/latest/index.html for
+      protocol documentation for the values to be used for different devices.
+
+additionalProperties: false
+
+examples:
+  - |
+    k3_reset: reset-controller {
+        compatible = "ti,sci-reset";
+        #reset-cells = <2>;
+    };
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/ti,tps380x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS380x reset controller
+
+maintainers:
+  - Marco Felsch <kernel@pengutronix.de>
+
+description: |
+  The TPS380x family [1] of supervisory circuits monitor supply voltages to
+  provide circuit initialization and timing supervision. The devices assert a
+  RESET signal if the voltage drops below a preset threshold or upon a manual
+  reset input (MR). The RESET output remains asserted for the factory
+  programmed delay after the voltage return above its threshold or after the
+  manual reset input is released.
+
+  [1] https://www.ti.com/product/TPS3801
+
+properties:
+  compatible:
+    enum:
+      - ti,tps3801
+
+  reset-gpios:
+    maxItems: 1
+    description: Reference to the GPIO connected to the MR pin.
+
+  "#reset-cells":
+    const: 0
+
+required:
+  - compatible
+  - reset-gpios
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    reset: reset-controller {
+        compatible = "ti,tps3801";
+        #reset-cells = <0>;
+        reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+    };
+...
@@ -0,0 +1,91 @@
+TI SysCon Reset Controller
+=======================
+
+Almost all SoCs have hardware modules that require reset control in addition
+to clock and power control for their functionality. The reset control is
+typically provided by means of memory-mapped I/O registers. These registers are
+sometimes a part of a larger register space region implementing various
+functionalities. This register range is best represented as a syscon node to
+allow multiple entities to access their relevant registers in the common
+register space.
+
+A SysCon Reset Controller node defines a device that uses a syscon node
+and provides reset management functionality for various hardware modules
+present on the SoC.
+
+SysCon Reset Controller Node
+============================
+Each of the reset provider/controller nodes should be a child of a syscon
+node and have the following properties.
+
+Required properties:
+--------------------
+ - compatible		: Should be,
+			    "ti,k2e-pscrst"
+			    "ti,k2l-pscrst"
+			    "ti,k2hk-pscrst"
+			    "ti,syscon-reset"
+ - #reset-cells		: Should be 1. Please see the reset consumer node below
+			  for usage details
+ - ti,reset-bits	: Contains the reset control register information
+			  Should contain 7 cells for each reset exposed to
+			  consumers, defined as:
+			    Cell #1 : offset of the reset assert control
+			              register from the syscon register base
+			    Cell #2 : bit position of the reset in the reset
+			              assert control register
+			    Cell #3 : offset of the reset deassert control
+			              register from the syscon register base
+			    Cell #4 : bit position of the reset in the reset
+			              deassert control register
+			    Cell #5 : offset of the reset status register
+			              from the syscon register base
+			    Cell #6 : bit position of the reset in the
+			              reset status register
+			    Cell #7 : Flags used to control reset behavior,
+			              available flags defined in the DT include
+			              file <dt-bindings/reset/ti-syscon.h>
+
+SysCon Reset Consumer Nodes
+===========================
+Each of the reset consumer nodes should have the following properties,
+in addition to their own properties.
+
+Required properties:
+--------------------
+ - resets	: A phandle to the reset controller node and an index number
+		  to a reset specifier as defined above.
+
+Please also refer to Documentation/devicetree/bindings/reset/reset.txt for
+common reset controller usage by consumers.
+
+Example:
+--------
+The following example demonstrates a syscon node, the reset controller node
+using the syscon node, and a consumer (a DSP device) on the TI Keystone 2
+66AK2E SoC.
+
+/ {
+	soc {
+		psc: power-sleep-controller@2350000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x02350000 0x1000>;
+
+			pscrst: reset-controller {
+				compatible = "ti,k2e-pscrst", "ti,syscon-reset";
+				#reset-cells = <1>;
+
+				ti,reset-bits = <
+					0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET   | STATUS_CLEAR) /* 0: dsp0 */
+					0xa40 5 0xa44 3 0     0 (ASSERT_SET   | DEASSERT_CLEAR | STATUS_NONE)  /* 1: example */
+				>;
+			};
+		};
+
+		dsp0: dsp0 {
+			...
+			resets = <&pscrst 0>;
+			...
+		};
+	};
+};
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/xlnx,zynqmp-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zynq UltraScale+ MPSoC and Versal reset
+
+maintainers:
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
+
+description: |
+  The Zynq UltraScale+ MPSoC and Versal has several different resets.
+
+  The PS reset subsystem is responsible for handling the external reset
+  input to the device and that all internal reset requirements are met
+  for the system (as a whole) and for the functional units.
+
+  Please also refer to reset.txt in this directory for common reset
+  controller binding usage. Device nodes that need access to reset
+  lines should specify them as a reset phandle in their corresponding
+  node as specified in reset.txt.
+
+  For list of all valid reset indices for Zynq UltraScale+ MPSoC
+  <dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+  For list of all valid reset indices for Versal
+  <dt-bindings/reset/xlnx-versal-resets.h>
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynqmp-reset
+      - xlnx,versal-reset
+      - xlnx,versal-net-reset
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    zynqmp_reset: reset-controller {
+        compatible = "xlnx,zynqmp-reset";
+        #reset-cells = <1>;
+    };
+
+...
@@ -0,0 +1,68 @@
+Xilinx Zynq Reset Manager
+
+The Zynq AP-SoC has several different resets.
+
+See Chapter 26 of the Zynq TRM (UG585) for more information about Zynq resets.
+
+Required properties:
+- compatible: "xlnx,zynq-reset"
+- reg: SLCR offset and size taken via syscon <0x200 0x48>
+- syscon: <&slcr>
+  This should be a phandle to the Zynq's SLCR registers.
+- #reset-cells: Must be 1
+
+The Zynq Reset Manager needs to be a childnode of the SLCR.
+
+Example:
+	rstc: rstc@200 {
+		compatible = "xlnx,zynq-reset";
+		reg = <0x200 0x48>;
+		#reset-cells = <1>;
+		syscon = <&slcr>;
+	};
+
+Reset outputs:
+ 0  : soft reset
+ 32 : ddr reset
+ 64 : topsw reset
+ 96 : dmac reset
+ 128: usb0 reset
+ 129: usb1 reset
+ 160: gem0 reset
+ 161: gem1 reset
+ 164: gem0 rx reset
+ 165: gem1 rx reset
+ 166: gem0 ref reset
+ 167: gem1 ref reset
+ 192: sdio0 reset
+ 193: sdio1 reset
+ 196: sdio0 ref reset
+ 197: sdio1 ref reset
+ 224: spi0 reset
+ 225: spi1 reset
+ 226: spi0 ref reset
+ 227: spi1 ref reset
+ 256: can0 reset
+ 257: can1 reset
+ 258: can0 ref reset
+ 259: can1 ref reset
+ 288: i2c0 reset
+ 289: i2c1 reset
+ 320: uart0 reset
+ 321: uart1 reset
+ 322: uart0 ref reset
+ 323: uart1 ref reset
+ 352: gpio reset
+ 384: lqspi reset
+ 385: qspi ref reset
+ 416: smc reset
+ 417: smc ref reset
+ 448: ocm reset
+ 512: fpga0 out reset
+ 513: fpga1 out reset
+ 514: fpga2 out reset
+ 515: fpga3 out reset
+ 544: a9 reset 0
+ 545: a9 reset 1
+ 552: peri reset
+