Resguardo inicial

linux-7.2.3/Documentation/devicetree/bindings/soc/altera/altr,sys-mgr.yaml

@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/altera/altr,sys-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera SOCFPGA System Manager
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - description: Cyclone5/Arria5/Arria10
+        items:
+          - const: altr,sys-mgr
+          - const: syscon
+      - description: Stratix10 SoC
+        items:
+          - const: altr,sys-mgr-s10
+          - const: altr,sys-mgr
+
+  reg:
+    maxItems: 1
+
+  cpu1-start-addr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CPU1 start address in hex
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: altr,sys-mgr-s10
+    then:
+      properties:
+        cpu1-start-addr: false
+
+additionalProperties: false
+
+examples:
+  - |
+    sysmgr@ffd08000 {
+      compatible = "altr,sys-mgr", "syscon";
+      reg = <0xffd08000 0x1000>;
+      cpu1-start-addr = <0xffd080c4>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml

@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/amlogic/amlogic,canvas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Canvas Video Lookup Table
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Maxime Jourdan <mjourdan@baylibre.com>
+
+description: |
+  A canvas is a collection of metadata that describes a pixel buffer.
+  Those metadata include: width, height, phyaddr, wrapping and block mode.
+  Starting with GXBB the endianness can also be described.
+
+  Many IPs within Amlogic SoCs rely on canvas indexes to read/write pixel data
+  rather than use the phy addresses directly. For instance, this is the case for
+  the video decoders and the display.
+
+  Amlogic SoCs have 256 canvas.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson8-canvas
+              - amlogic,meson8b-canvas
+              - amlogic,meson8m2-canvas
+          - const: amlogic,canvas
+      - const: amlogic,canvas # GXBB and newer SoCs
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    canvas: video-lut@48 {
+        compatible = "amlogic,canvas";
+        reg = <0x48 0x14>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-clk-measure.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Internal Clock Measurer
+
+description:
+  The Amlogic SoCs contains an IP to measure the internal clocks.
+  The precision is multiple of MHz, useful to debug the clock states.
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gx-clk-measure
+      - amlogic,meson8-clk-measure
+      - amlogic,meson8b-clk-measure
+      - amlogic,meson-axg-clk-measure
+      - amlogic,meson-g12a-clk-measure
+      - amlogic,meson-sm1-clk-measure
+      - amlogic,c3-clk-measure
+      - amlogic,s4-clk-measure
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-measure@8758 {
+        compatible = "amlogic,meson-gx-clk-measure";
+        reg = <0x8758 0x10>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml

@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson System Control registers
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,meson-hhi-sysctrl
+          - amlogic,meson-gx-hhi-sysctrl
+          - amlogic,meson-gx-ao-sysctrl
+          - amlogic,meson-axg-hhi-sysctrl
+          - amlogic,meson-axg-ao-sysctrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    type: object
+
+  power-controller:
+    $ref: /schemas/power/amlogic,meson-ee-pwrc.yaml
+
+  pinctrl:
+    type: object
+
+  phy:
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-hhi-sysctrl
+    then:
+      properties:
+        clock-controller:
+          $ref: /schemas/clock/amlogic,meson8-clkc.yaml#
+
+        pinctrl: false
+        phy: false
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gx-hhi-sysctrl
+            - amlogic,meson-axg-hhi-sysctrl
+    then:
+      properties:
+        clock-controller:
+          $ref: /schemas/clock/amlogic,gxbb-clkc.yaml#
+
+      required:
+        - power-controller
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gx-ao-sysctrl
+            - amlogic,meson-axg-ao-sysctrl
+    then:
+      properties:
+        clock-controller:
+          $ref: /schemas/clock/amlogic,gxbb-aoclkc.yaml#
+
+        power-controller: false
+        phy: false
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gx-hhi-sysctrl
+    then:
+      properties:
+        phy: false
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-axg-hhi-sysctrl
+    then:
+      properties:
+        phy:
+          oneOf:
+            - $ref: /schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml
+            - $ref: /schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
+
+required:
+  - compatible
+  - reg
+  - clock-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    bus@c883c000 {
+        compatible = "simple-bus";
+        reg = <0xc883c000 0x2000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xc883c000 0x2000>;
+
+        sysctrl: system-controller@0 {
+            compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
+            reg = <0 0x400>;
+
+            clock-controller {
+                compatible = "amlogic,gxbb-clkc";
+                #clock-cells = <1>;
+                clocks = <&xtal>;
+                clock-names = "xtal";
+            };
+
+            power-controller {
+                compatible = "amlogic,meson-gxbb-pwrc";
+                #power-domain-cells = <1>;
+                amlogic,ao-sysctrl = <&sysctrl_AO>;
+
+                resets = <&reset_viu>,
+                         <&reset_venc>,
+                         <&reset_vcbus>,
+                         <&reset_bt656>,
+                         <&reset_dvin>,
+                         <&reset_rdma>,
+                         <&reset_venci>,
+                         <&reset_vencp>,
+                         <&reset_vdac>,
+                         <&reset_vdi6>,
+                         <&reset_vencl>,
+                         <&reset_vid_lock>;
+                reset-names = "viu", "venc", "vcbus", "bt656", "dvin",
+                              "rdma", "venci", "vencp", "vdac", "vdi6",
+                              "vencl", "vid_lock";
+                clocks = <&clk_vpu>, <&clk_vapb>;
+                clock-names = "vpu", "vapb";
+            };
+        };
+    };
+
+    bus@c8100000 {
+        compatible = "simple-bus";
+        reg = <0xc8100000 0x100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xc8100000 0x100000>;
+
+        sysctrl_AO: system-controller@0 {
+            compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
+            reg = <0 0x100>;
+
+            clock-controller {
+                compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
+                #clock-cells = <1>;
+                #reset-cells = <1>;
+                clocks = <&xtal>, <&clk81>;
+                clock-names = "xtal", "mpeg-clk";
+            };
+        };
+    };
+
+  - |
+    system-controller@ff63c000 {
+        compatible = "amlogic,meson-axg-hhi-sysctrl", "simple-mfd", "syscon";
+        reg = <0xff63c000 0x400>;
+
+        clock-controller {
+            compatible = "amlogic,axg-clkc";
+            #clock-cells = <1>;
+            clocks = <&xtal>;
+            clock-names = "xtal";
+        };
+
+        power-controller {
+            compatible = "amlogic,meson-axg-pwrc";
+            #power-domain-cells = <1>;
+            amlogic,ao-sysctrl = <&sysctrl_AO>;
+
+            resets = <&reset_viu>,
+                     <&reset_venc>,
+                     <&reset_vcbus>,
+                     <&reset_vencl>,
+                     <&reset_vid_lock>;
+            reset-names = "viu", "venc", "vcbus", "vencl", "vid_lock";
+            clocks = <&clk_vpu>, <&clk_vapb>;
+            clock-names = "vpu", "vapb";
+        };
+
+        phy {
+            compatible = "amlogic,axg-mipi-pcie-analog-phy";
+            #phy-cells = <0>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# # Copyright (c) 2018 Google LLC
+# # Copyright (c) 2021 Aspeed Technology Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/aspeed/uart-routing.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed UART Routing Controller
+
+maintainers:
+  - Oskar Senft <osk@google.com>
+  - Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+
+description:
+  The Aspeed UART routing control allow to dynamically route the inputs for
+  the built-in UARTS and physical serial I/O ports.
+
+  This allows, for example, to connect the output of UART to another UART.
+  This can be used to enable Host <-> BMC communication via UARTs, e.g. to
+  allow access to the Host's serial console.
+
+  This driver is for the BMC side. The sysfs files allow the BMC userspace
+  which owns the system configuration policy, to configure how UARTs and
+  physical serial I/O ports are routed.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2400-uart-routing
+          - aspeed,ast2500-uart-routing
+          - aspeed,ast2600-uart-routing
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    lpc: lpc@1e789000 {
+        compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
+        reg = <0x1e789000 0x1000>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e789000 0x1000>;
+
+        uart_routing: uart-routing@98 {
+            compatible = "aspeed,ast2600-uart-routing";
+            reg = <0x98 0x8>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml

@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm23550-cdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM23550 Cluster Dormant Control
+
+description:
+  The Cluster Dormant Control block keeps the CPU in idle state. A command
+  needs to be sent to this block to bring the CPU into running state.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm23550-cdc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cdc@3fe0e000 {
+        compatible = "brcm,bcm23550-cdc";
+        reg = <0x3fe0e000 0x78>;
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2711-avs-monitor.yaml

@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2711-avs-monitor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom AVS Monitor
+
+maintainers:
+  - Stefan Wahren <wahrenst@gmx.net>
+
+properties:
+  compatible:
+    items:
+      - const: brcm,bcm2711-avs-monitor
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  thermal:
+    $ref: /schemas/thermal/brcm,avs-ro-thermal.yaml
+    description: Broadcom AVS ring oscillator thermal
+
+required:
+  - compatible
+  - reg
+  - thermal
+
+additionalProperties: false
+
+examples:
+  - |
+    avs-monitor@7d5d2000 {
+        compatible = "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd";
+        reg = <0x7d5d2000 0xf00>;
+
+        thermal: thermal {
+            compatible = "brcm,bcm2711-thermal";
+            #thermal-sensor-cells = <0>;
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml

@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-pm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 PM (Power domains, watchdog)
+
+description: |
+  The PM block controls power domains and some reset lines, and includes a
+  watchdog timer.
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm2835-pm
+          - brcm,bcm2711-pm
+          - brcm,bcm2712-pm
+      - const: brcm,bcm2835-pm-wdt
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: pm
+      - const: asb
+      - const: rpivid_asb
+
+  "#power-domain-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 4
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: v3d
+      - const: peri_image
+      - const: h264
+      - const: isp
+
+  system-power-controller:
+    type: boolean
+
+  timeout-sec: true
+
+required:
+  - compatible
+  - reg
+  - "#power-domain-cells"
+  - "#reset-cells"
+
+allOf:
+  - $ref: /schemas/watchdog/watchdog.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm2835-pm
+              - brcm,bcm2711-pm
+    then:
+      required:
+        - clocks
+
+      properties:
+        reg:
+          minItems: 2
+
+        reg-names:
+          minItems: 2
+
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+        reg-names:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    watchdog@7e100000 {
+        compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+        reg = <0x7e100000 0x114>,
+              <0x7e00a000 0x24>;
+        reg-names = "pm", "asb";
+        clocks = <&clocks BCM2835_CLOCK_V3D>,
+               <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+               <&clocks BCM2835_CLOCK_H264>,
+               <&clocks BCM2835_CLOCK_ISP>;
+        clock-names = "v3d", "peri_image", "h264", "isp";
+        system-power-controller;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.yaml

@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-vchiq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VCHIQ firmware services
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+description:
+  The VCHIQ communication channel can be provided by BCM283x and Capri SoCs,
+  to communicate with the VPU-side OS services.
+
+properties:
+  compatible:
+    oneOf:
+      - description: BCM2835 based boards
+        items:
+          - enum:
+              - brcm,bcm2835-vchiq
+
+      - description: BCM2836/BCM2837 based boards
+        items:
+          - enum:
+              - brcm,bcm2836-vchiq
+          - const: brcm,bcm2835-vchiq
+
+  reg:
+    description: Physical base address and length of the doorbell register pair
+    minItems: 1
+
+  interrupts:
+    description: Interrupt number of the doorbell interrupt
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox@7e00b840 {
+      compatible = "brcm,bcm2835-vchiq";
+      reg = <0x7e00b840 0xf>;
+      interrupts = <0 2>;
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/soc/cirrus/cirrus,ep9301-syscon.yaml

@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/cirrus/cirrus,ep9301-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP93xx Platforms System Controller
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+description: |
+  Central resources are controlled by a set of software-locked registers,
+  which can be used to prevent accidental accesses. Syscon generates
+  the various bus and peripheral clocks and controls the system startup
+  configuration.
+
+  The System Controller (Syscon) provides:
+  - Clock control
+  - Power management
+  - System configuration management
+
+  Syscon registers are common for all EP93xx SoC's, through some actual peripheral
+  may be missing depending on actual SoC model.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - cirrus,ep9302-syscon
+              - cirrus,ep9307-syscon
+              - cirrus,ep9312-syscon
+              - cirrus,ep9315-syscon
+          - const: cirrus,ep9301-syscon
+          - const: syscon
+      - items:
+          - const: cirrus,ep9301-syscon
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: reference clock
+
+patternProperties:
+  '^pins-':
+    type: object
+    description: pin node
+    $ref: /schemas/pinctrl/pinmux-node.yaml
+
+    properties:
+      function:
+        enum: [ spi, ac97, i2s, pwm, keypad, pata, lcd, gpio ]
+
+      groups:
+        enum: [ ssp, ac97, i2s_on_ssp, i2s_on_ac97, pwm1, gpio1agrp,
+                gpio2agrp, gpio3agrp, gpio4agrp, gpio6agrp, gpio7agrp,
+                rasteronsdram0grp, rasteronsdram3grp, keypadgrp, idegrp ]
+
+    required:
+      - function
+      - groups
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@80930000 {
+      compatible = "cirrus,ep9301-syscon", "syscon";
+      reg = <0x80930000 0x1000>;
+
+      #clock-cells = <1>;
+      clocks = <&xtali>;
+
+      spi_default_pins: pins-spi {
+        function = "spi";
+        groups = "ssp";
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.yaml

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/cix/cix,sky1-system-control.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cix Sky1 SoC system control register region
+
+maintainers:
+  - Gary Yang <gary.yang@cixtech.com>
+
+description:
+  An wide assortment of registers of the system controller on Sky1 SoC,
+  including resets, usb, wakeup sources and so on.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - cix,sky1-system-control
+          - cix,sky1-s5-system-control
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@4160000 {
+      compatible = "cix,sky1-system-control", "syscon";
+      reg = <0x4160000 0x100>;
+      #reset-cells = <1>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/dove/pmu.txt

@@ -0,0 +1,56 @@
+Device Tree bindings for Marvell PMU
+
+Required properties:
+ - compatible: value should be "marvell,dove-pmu".
+    May also include "simple-bus" if there are child devices, in which
+    case the ranges node is required.
+ - reg: two base addresses and sizes of the PM controller and PMU.
+ - interrupts: single interrupt number for the PMU interrupt
+ - interrupt-controller: must be specified as the PMU itself is an
+    interrupt controller.
+ - #interrupt-cells: must be 1.
+ - #reset-cells: must be 1.
+ - domains: sub-node containing domain descriptions
+
+Optional properties:
+ - ranges: defines the address mapping for child devices, as per the
+   standard property of this name.  Required when compatible includes
+   "simple-bus".
+
+Power domain descriptions are listed as child nodes of the "domains"
+sub-node.  Each domain has the following properties:
+
+Required properties:
+ - #power-domain-cells: must be 0.
+
+Optional properties:
+ - marvell,pmu_pwr_mask: specifies the mask value for PMU power register
+ - marvell,pmu_iso_mask: specifies the mask value for PMU isolation register
+ - resets: points to the reset manager (PMU node) and reset index.
+
+Example:
+
+	pmu: power-management@d0000 {
+		compatible = "marvell,dove-pmu";
+		reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
+		interrupts = <33>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#reset-cells = <1>;
+
+		domains {
+			vpu_domain: vpu-domain {
+				#power-domain-cells = <0>;
+				marvell,pmu_pwr_mask = <0x00000008>;
+				marvell,pmu_iso_mask = <0x00000001>;
+				resets = <&pmu 16>;
+			};
+
+			gpu_domain: gpu-domain {
+				#power-domain-cells = <0>;
+				marvell,pmu_pwr_mask = <0x00000004>;
+				marvell,pmu_iso_mask = <0x00000002>;
+				resets = <&pmu 18>;
+			};
+		};
+	};

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm.txt

@@ -0,0 +1,67 @@
+* Freescale Communications Processor Module
+
+NOTE: This is an interim binding, and will likely change slightly,
+as more devices are supported.  The QE bindings especially are
+incomplete.
+
+* Root CPM node
+
+Properties:
+- compatible : "fsl,cpm1", "fsl,cpm2", or "fsl,qe".
+- reg : A 48-byte region beginning with CPCR.
+
+Example:
+     cpm@119c0 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	#interrupt-cells = <2>;
+	compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
+	reg = <119c0 30>;
+     }
+
+* Properties common to multiple CPM/QE devices
+
+- fsl,cpm-command : This value is ORed with the opcode and command flag
+                    to specify the device on which a CPM command operates.
+
+- fsl,cpm-brg : Indicates which baud rate generator the device
+                is associated with.  If absent, an unused BRG
+                should be dynamically allocated.  If zero, the
+                device uses an external clock rather than a BRG.
+
+- reg : Unless otherwise specified, the first resource represents the
+        scc/fcc/ucc registers, and the second represents the device's
+        parameter RAM region (if it has one).
+
+* Multi-User RAM (MURAM)
+
+The multi-user/dual-ported RAM is expressed as a bus under the CPM node.
+
+Ranges must be set up subject to the following restrictions:
+
+- Children's reg nodes must be offsets from the start of all muram, even
+  if the user-data area does not begin at zero.
+- If multiple range entries are used, the difference between the parent
+  address and the child address must be the same in all, so that a single
+  mapping can cover them all while maintaining the ability to determine
+  CPM-side offsets with pointer subtraction.  It is recommended that
+  multiple range entries not be used.
+- A child address of zero must be translatable, even if no reg resources
+  contain it.
+
+A child "data" node must exist, compatible with "fsl,cpm-muram-data", to
+indicate the portion of muram that is usable by the OS for arbitrary
+purposes.  The data node may have an arbitrary number of reg resources,
+all of which contribute to the allocatable muram pool.
+
+Example, based on mpc8272:
+	muram@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 10000>;
+
+		data@0 {
+			compatible = "fsl,cpm-muram-data";
+			reg = <0 2000 9800 800>;
+		};
+	};

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/brg.txt

@@ -0,0 +1,21 @@
+* Baud Rate Generators
+
+Currently defined compatibles:
+fsl,cpm-brg
+fsl,cpm1-brg
+fsl,cpm2-brg
+
+Properties:
+- reg : There may be an arbitrary number of reg resources; BRG
+  numbers are assigned to these in order.
+- clock-frequency : Specifies the base frequency driving
+  the BRG.
+
+Example:
+	brg@119f0 {
+		compatible = "fsl,mpc8272-brg",
+			     "fsl,cpm2-brg",
+			     "fsl,cpm-brg";
+		reg = <119f0 10 115f0 10>;
+		clock-frequency = <d#25000000>;
+	};

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/i2c.txt

@@ -0,0 +1,41 @@
+* I2C
+
+The I2C controller is expressed as a bus under the CPM node.
+
+Properties:
+- compatible : "fsl,cpm1-i2c", "fsl,cpm2-i2c"
+- reg : On CPM2 devices, the second resource doesn't specify the I2C
+  Parameter RAM itself, but the I2C_BASE field of the CPM2 Parameter RAM
+  (typically 0x8afc 0x2).
+- #address-cells : Should be one. The cell is the i2c device address with
+  the r/w bit set to zero.
+- #size-cells : Should be zero.
+- clock-frequency : Can be used to set the i2c clock frequency. If
+  unspecified, a default frequency of 60kHz is being used.
+The following two properties are deprecated. They are only used by legacy
+i2c drivers to find the bus to probe:
+- linux,i2c-index : Can be used to hard code an i2c bus number. By default,
+  the bus number is dynamically assigned by the i2c core.
+- linux,i2c-class : Can be used to override the i2c class. The class is used
+  by legacy i2c device drivers to find a bus in a specific context like
+  system management, video or sound. By default, I2C_CLASS_HWMON (1) is
+  being used. The definition of the classes can be found in
+  include/i2c/i2c.h
+
+Example, based on mpc823:
+
+	i2c@860 {
+		compatible = "fsl,mpc823-i2c",
+			     "fsl,cpm1-i2c";
+		reg = <0x860 0x20 0x3c80 0x30>;
+		interrupts = <16>;
+		interrupt-parent = <&CPM_PIC>;
+		fsl,cpm-command = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@68 {
+			compatible = "dallas,ds1307";
+			reg = <0x68>;
+		};
+	};

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/pic.txt

@@ -0,0 +1,18 @@
+* Interrupt Controllers
+
+Currently defined compatibles:
+- fsl,cpm1-pic
+  - only one interrupt cell
+- fsl,pq1-pic
+- fsl,cpm2-pic
+  - second interrupt cell is level/sense:
+    - 2 is falling edge
+    - 8 is active low
+
+Example:
+	interrupt-controller@10c00 {
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <10c00 80>;
+		compatible = "mpc8272-pic", "fsl,cpm2-pic";
+	};

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/usb.txt

@@ -0,0 +1,15 @@
+* USB (Universal Serial Bus Controller)
+
+Properties:
+- compatible : "fsl,cpm1-usb", "fsl,cpm2-usb", "fsl,qe-usb"
+
+Example:
+	usb@11bc0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,cpm2-usb";
+		reg = <11b60 18 8b00 100>;
+		interrupts = <b 8>;
+		interrupt-parent = <&PIC>;
+		fsl,cpm-command = <2e600000>;
+	};

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml

@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerQUICC CPM QUICC Multichannel Controller (QMC)
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The QMC (QUICC Multichannel Controller) emulates up to 64 channels within one
+  serial controller using the same TDM physical interface routed from TSA.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,mpc885-scc-qmc
+          - fsl,mpc866-scc-qmc
+      - const: fsl,cpm1-scc-qmc
+
+  reg:
+    items:
+      - description: SCC (Serial communication controller) register base
+      - description: SCC parameter ram base
+      - description: Dual port ram base
+
+  reg-names:
+    items:
+      - const: scc_regs
+      - const: scc_pram
+      - const: dpram
+
+  interrupts:
+    maxItems: 1
+    description: SCC interrupt line in the CPM interrupt controller
+
+  fsl,tsa-serial:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TSA node
+          - enum: [1, 2, 3]
+            description: |
+              TSA serial interface (dt-bindings/soc/cpm1-fsl,tsa.h defines these
+              values)
+               - 1: SCC2
+               - 2: SCC3
+               - 3: SCC4
+    description:
+      Should be a phandle/number pair. The phandle to TSA node and the TSA
+      serial interface to use.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^channel@([0-9]|[1-5][0-9]|6[0-3])$':
+    description:
+      A channel managed by this controller
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 63
+        description:
+          The channel number
+
+      fsl,operational-mode:
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [transparent, hdlc]
+        default: transparent
+        description: |
+          The channel operational mode
+            - hdlc: The channel handles HDLC frames
+            - transparent: The channel handles raw data without any processing
+
+      fsl,reverse-data:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The bit order as seen on the channels is reversed,
+          transmitting/receiving the MSB of each octet first.
+          This flag is used only in 'transparent' mode.
+
+      fsl,tx-ts-mask:
+        $ref: /schemas/types.yaml#/definitions/uint64
+        description:
+          Channel assigned Tx time-slots within the Tx time-slots routed by the
+          TSA to this cell.
+
+      fsl,rx-ts-mask:
+        $ref: /schemas/types.yaml#/definitions/uint64
+        description:
+          Channel assigned Rx time-slots within the Rx time-slots routed by the
+          TSA to this cell.
+
+      compatible:
+        items:
+          - enum:
+              - fsl,mpc885-scc-qmc-hdlc
+              - fsl,mpc866-scc-qmc-hdlc
+          - const: fsl,cpm1-scc-qmc-hdlc
+          - const: fsl,qmc-hdlc
+
+      fsl,framer:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description:
+          phandle to the framer node. The framer is in charge of an E1/T1 line
+          interface connected to the TDM bus. It can be used to get the E1/T1 line
+          status such as link up/down.
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              not:
+                contains:
+                  const: fsl,qmc-hdlc
+        then:
+          properties:
+            fsl,framer: false
+
+    required:
+      - reg
+      - fsl,tx-ts-mask
+      - fsl,rx-ts-mask
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - fsl,tsa-serial
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/cpm1-fsl,tsa.h>
+
+    qmc@a60 {
+        compatible = "fsl,mpc885-scc-qmc", "fsl,cpm1-scc-qmc";
+        reg = <0xa60 0x20>,
+              <0x3f00 0xc0>,
+              <0x2000 0x1000>;
+        reg-names = "scc_regs", "scc_pram", "dpram";
+        interrupts = <27>;
+        interrupt-parent = <&CPM_PIC>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fsl,tsa-serial = <&tsa FSL_CPM_TSA_SCC4>;
+
+        channel@16 {
+            /* Ch16 : First 4 even TS from all routed from TSA */
+            reg = <16>;
+            fsl,operational-mode = "transparent";
+            fsl,reverse-data;
+            fsl,tx-ts-mask = <0x00000000 0x000000aa>;
+            fsl,rx-ts-mask = <0x00000000 0x000000aa>;
+        };
+
+        channel@17 {
+            /* Ch17 : First 4 odd TS from all routed from TSA */
+            reg = <17>;
+            fsl,operational-mode = "transparent";
+            fsl,reverse-data;
+            fsl,tx-ts-mask = <0x00000000 0x00000055>;
+            fsl,rx-ts-mask = <0x00000000 0x00000055>;
+        };
+
+        channel@19 {
+            /* Ch19 : 8 TS (TS 8..15) from all routed from TSA */
+            compatible = "fsl,mpc885-scc-qmc-hdlc",
+                         "fsl,cpm1-scc-qmc-hdlc",
+                         "fsl,qmc-hdlc";
+            reg = <19>;
+            fsl,operational-mode = "hdlc";
+            fsl,tx-ts-mask = <0x00000000 0x0000ff00>;
+            fsl,rx-ts-mask = <0x00000000 0x0000ff00>;
+            fsl,framer = <&framer>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml

@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerQUICC CPM Time-slot assigner (TSA) controller
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The TSA is the time-slot assigner that can be found on some PowerQUICC SoC.
+  Its purpose is to route some TDM time-slots to other internal serial
+  controllers.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,mpc885-tsa
+          - fsl,mpc866-tsa
+      - const: fsl,cpm1-tsa
+
+  reg:
+    items:
+      - description: SI (Serial Interface) register base
+      - description: SI RAM base
+
+  reg-names:
+    items:
+      - const: si_regs
+      - const: si_ram
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^tdm@[0-1]$':
+    description:
+      The TDM managed by this controller
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+        description:
+          The TDM number for this TDM, 0 for TDMa and 1 for TDMb
+
+      fsl,common-rxtx-pins:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The hardware can use four dedicated pins for Tx clock, Tx sync, Rx
+          clock and Rx sync or use only two pins, Tx/Rx clock and Tx/Rx sync.
+          Without the 'fsl,common-rxtx-pins' property, the four pins are used.
+          With the 'fsl,common-rxtx-pins' property, two pins are used.
+
+      clocks:
+        minItems: 2
+        items:
+          - description: External clock connected to L1RSYNC pin
+          - description: External clock connected to L1RCLK pin
+          - description: External clock connected to L1TSYNC pin
+          - description: External clock connected to L1TCLK pin
+
+      clock-names:
+        minItems: 2
+        items:
+          - const: l1rsync
+          - const: l1rclk
+          - const: l1tsync
+          - const: l1tclk
+
+      fsl,rx-frame-sync-delay-bits:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Receive frame sync delay in number of bits.
+          Indicates the delay between the Rx sync and the first bit of the Rx
+          frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
+
+      fsl,tx-frame-sync-delay-bits:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Transmit frame sync delay in number of bits.
+          Indicates the delay between the Tx sync and the first bit of the Tx
+          frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
+
+      fsl,clock-falling-edge:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Data is sent on falling edge of the clock (and received on the rising
+          edge). If 'clock-falling-edge' is not present, data is sent on the
+          rising edge (and received on the falling edge).
+
+      fsl,fsync-rising-edge:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Frame sync pulses are sampled with the rising edge of the channel
+          clock. If 'fsync-rising-edge' is not present, pulses are sampled with
+          the falling edge.
+
+      fsl,double-speed-clock:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The channel clock is twice the data rate.
+
+    patternProperties:
+      '^fsl,[rt]x-ts-routes$':
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        description: |
+          A list of tuple that indicates the Tx or Rx time-slots routes.
+        items:
+          items:
+            - description:
+                The number of time-slots
+              minimum: 1
+              maximum: 64
+            - description: |
+                The source (Tx) or destination (Rx) serial interface
+                (dt-bindings/soc/cpm1-fsl,tsa.h defines these values)
+                 - 0: No destination
+                 - 1: SCC2
+                 - 2: SCC3
+                 - 3: SCC4
+                 - 4: SMC1
+                 - 5: SMC2
+              enum: [0, 1, 2, 3, 4, 5]
+        minItems: 1
+        maxItems: 64
+
+    allOf:
+      # If fsl,common-rxtx-pins is present, only 2 clocks are needed.
+      # Else, the 4 clocks must be present.
+      - if:
+          required:
+            - fsl,common-rxtx-pins
+        then:
+          properties:
+            clocks:
+              maxItems: 2
+            clock-names:
+              maxItems: 2
+        else:
+          properties:
+            clocks:
+              minItems: 4
+            clock-names:
+              minItems: 4
+
+    required:
+      - reg
+      - clocks
+      - clock-names
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/cpm1-fsl,tsa.h>
+
+    tsa@ae0 {
+        compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa";
+        reg = <0xae0 0x10>,
+              <0xc00 0x200>;
+        reg-names = "si_regs", "si_ram";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tdm@0 {
+            /* TDMa */
+            reg = <0>;
+
+            clocks = <&clk_l1rsynca>, <&clk_l1rclka>;
+            clock-names = "l1rsync", "l1rclk";
+
+            fsl,common-rxtx-pins;
+            fsl,fsync-rising-edge;
+
+            fsl,tx-ts-routes = <2 0>,             /* TS 0..1 */
+                           <24 FSL_CPM_TSA_SCC4>, /* TS 2..25 */
+                           <1 0>,                 /* TS 26 */
+                           <5 FSL_CPM_TSA_SCC3>;  /* TS 27..31 */
+
+            fsl,rx-ts-routes = <2 0>,             /* TS 0..1 */
+                           <24 FSL_CPM_TSA_SCC4>, /* 2..25 */
+                           <1 0>,                 /* TS 26 */
+                           <5 FSL_CPM_TSA_SCC3>;  /* TS 27..31 */
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-firmware.yaml

@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-firmware.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Firmware Node
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  This node defines a firmware binary that is embedded in the device tree, for
+  the purpose of passing the firmware from bootloader to the kernel, or from
+  the hypervisor to the guest.
+
+  The firmware node itself contains the firmware binary contents, a compatible
+  property, and any firmware-specific properties.  The node should be placed
+  inside a QE node that needs it.  Doing so eliminates the need for a
+  fsl,firmware-phandle property.  Other QE nodes that need the same firmware
+  should define an fsl,firmware-phandle property that points to the firmware node
+  in the first QE node.
+
+  The fsl,firmware property can be specified in the DTS (possibly using incbin)
+  or can be inserted by the boot loader at boot time.
+
+properties:
+  compatible:
+    enum:
+      - fsl,qe-firmware
+
+  fsl,firmware:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      A standard property.  This property contains the firmware binary "blob".
+
+required:
+  - compatible
+  - fsl,firmware
+
+additionalProperties: false
+
+examples:
+  - |
+    qe-firmware {
+        compatible = "fsl,qe-firmware";
+        fsl,firmware = <0x70 0xcd 0x00 0x00 0x01 0x46 0x45>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ic.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Interrupt Controller (IC)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,qe-ic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: QE interrupt
+      - description: QE critical
+      - description: QE error
+    minItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@80 {
+        compatible = "fsl,qe-ic";
+        reg = <0x80 0x80>;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        interrupts = <95 2 0 0  94 2 0 0>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml

@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-muram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine Multi-User RAM (MURAM)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: Multi-User RAM (MURAM)
+
+properties:
+  compatible:
+    items:
+      - const: fsl,qe-muram
+      - const: fsl,cpm-muram
+
+  ranges:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [host, slave]
+
+patternProperties:
+  '^data\-only@[a-f0-9]+$':
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: fsl,qe-muram-data
+          - const: fsl,cpm-muram-data
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    muram@10000 {
+        compatible = "fsl,qe-muram", "fsl,cpm-muram";
+        ranges = <0 0x00010000 0x0000c000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        data-only@0{
+            compatible = "fsl,qe-muram-data",
+                         "fsl,cpm-muram-data";
+            reg = <0 0xc000>;
+        };
+     };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-si.yaml

@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-si.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Serial Interface Block (SI)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The SI manages the routing of eight TDM lines to the QE block serial drivers,
+  the MCC and the UCCs, for receive and transmit.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,ls1043-qe-si
+          - const: fsl,t1040-qe-si
+      - enum:
+          - fsl,t1040-qe-si
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    si@700 {
+        compatible = "fsl,t1040-qe-si";
+        reg = <0x700 0x80>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-siram.yaml

@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-siram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module Serial Interface Block RAM(SIRAM)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  store the routing entries of SI
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,ls1043-qe-siram
+          - const: fsl,t1040-qe-siram
+      - const: fsl,t1040-qe-siram
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    siram@1000 {
+        compatible = "fsl,t1040-qe-siram";
+        reg = <0x1000 0x800>;
+    };
+

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-tsa.yaml

@@ -0,0 +1,210 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-tsa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerQUICC QE Time-slot assigner (TSA) controller
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The TSA is the time-slot assigner that can be found on some PowerQUICC SoC.
+  Its purpose is to route some TDM time-slots to other internal serial
+  controllers.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,mpc8321-tsa
+      - const: fsl,qe-tsa
+
+  reg:
+    items:
+      - description: SI (Serial Interface) register base
+      - description: SI RAM base
+
+  reg-names:
+    items:
+      - const: si_regs
+      - const: si_ram
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^tdm@[0-3]$':
+    description:
+      The TDM managed by this controller
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+        description:
+          The TDM number for this TDM, 0 for TDMa, 1 for TDMb, 2 for TDMc and 3
+          for TDMd.
+
+      fsl,common-rxtx-pins:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The hardware can use four dedicated pins for Tx clock, Tx sync, Rx
+          clock and Rx sync or use only two pins, Tx/Rx clock and Tx/Rx sync.
+          Without the 'fsl,common-rxtx-pins' property, the four pins are used.
+          With the 'fsl,common-rxtx-pins' property, two pins are used.
+
+      clocks:
+        minItems: 2
+        items:
+          - description: Receive sync clock
+          - description: Receive data clock
+          - description: Transmit sync clock
+          - description: Transmit data clock
+
+      clock-names:
+        minItems: 2
+        items:
+          - const: rsync
+          - const: rclk
+          - const: tsync
+          - const: tclk
+
+      fsl,rx-frame-sync-delay-bits:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Receive frame sync delay in number of bits.
+          Indicates the delay between the Rx sync and the first bit of the Rx
+          frame.
+
+      fsl,tx-frame-sync-delay-bits:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Transmit frame sync delay in number of bits.
+          Indicates the delay between the Tx sync and the first bit of the Tx
+          frame.
+
+      fsl,clock-falling-edge:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Data is sent on falling edge of the clock (and received on the rising
+          edge). If not present, data is sent on the rising edge (and received
+          on the falling edge).
+
+      fsl,fsync-rising-edge:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Frame sync pulses are sampled with the rising edge of the channel
+          clock. If not present, pulses are sampled with the falling edge.
+
+      fsl,fsync-active-low:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Frame sync signals are active on low logic level.
+          If not present, sync signals are active on high level.
+
+      fsl,double-speed-clock:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The channel clock is twice the data rate.
+
+    patternProperties:
+      '^fsl,[rt]x-ts-routes$':
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        description: |
+          A list of tuple that indicates the Tx or Rx time-slots routes.
+        items:
+          items:
+            - description:
+                The number of time-slots
+              minimum: 1
+              maximum: 64
+            - description: |
+                The source (Tx) or destination (Rx) serial interface
+                (dt-bindings/soc/qe-fsl,tsa.h defines these values)
+                 - 0: No destination
+                 - 1: UCC1
+                 - 2: UCC2
+                 - 3: UCC3
+                 - 4: UCC4
+                 - 5: UCC5
+              enum: [0, 1, 2, 3, 4, 5]
+        minItems: 1
+        maxItems: 64
+
+    allOf:
+      # If fsl,common-rxtx-pins is present, only 2 clocks are needed.
+      # Else, the 4 clocks must be present.
+      - if:
+          required:
+            - fsl,common-rxtx-pins
+        then:
+          properties:
+            clocks:
+              maxItems: 2
+            clock-names:
+              maxItems: 2
+        else:
+          properties:
+            clocks:
+              minItems: 4
+            clock-names:
+              minItems: 4
+
+    required:
+      - reg
+      - clocks
+      - clock-names
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qe-fsl,tsa.h>
+
+    tsa@ae0 {
+        compatible = "fsl,mpc8321-tsa", "fsl,qe-tsa";
+        reg = <0xae0 0x10>,
+              <0xc00 0x200>;
+        reg-names = "si_regs", "si_ram";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tdm@0 {
+            /* TDMa */
+            reg = <0>;
+
+            clocks = <&clk_l1rsynca>, <&clk_l1rclka>;
+            clock-names = "rsync", "rclk";
+
+            fsl,common-rxtx-pins;
+            fsl,fsync-rising-edge;
+
+            fsl,tx-ts-routes = <2 0>,             /* TS 0..1 */
+                           <24 FSL_QE_TSA_UCC4>, /* TS 2..25 */
+                           <1 0>,                 /* TS 26 */
+                           <5 FSL_QE_TSA_UCC3>;  /* TS 27..31 */
+
+            fsl,rx-ts-routes = <2 0>,             /* TS 0..1 */
+                           <24 FSL_QE_TSA_UCC4>, /* 2..25 */
+                           <1 0>,                 /* TS 26 */
+                           <5 FSL_QE_TSA_UCC3>;  /* TS 27..31 */
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ucc-qmc.yaml

@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-ucc-qmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerQUICC QE QUICC Multichannel Controller (QMC)
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The QMC (QUICC Multichannel Controller) emulates up to 64 channels within one
+  serial controller using the same TDM physical interface routed from TSA.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,mpc8321-ucc-qmc
+      - const: fsl,qe-ucc-qmc
+
+  reg:
+    items:
+      - description: UCC (Unified communication controller) register base
+      - description: Dual port ram base
+
+  reg-names:
+    items:
+      - const: ucc_regs
+      - const: dpram
+
+  interrupts:
+    maxItems: 1
+    description: UCC interrupt line in the QE interrupt controller
+
+  fsl,tsa-serial:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TSA node
+          - enum: [1, 2, 3, 4, 5]
+            description: |
+              TSA serial interface (dt-bindings/soc/qe-fsl,tsa.h defines these
+              values)
+               - 1: UCC1
+               - 2: UCC2
+               - 3: UCC3
+               - 4: UCC4
+               - 5: UCC5
+    description:
+      Should be a phandle/number pair. The phandle to TSA node and the TSA
+      serial interface to use.
+
+  fsl,soft-qmc:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Soft QMC firmware name to load. If this property is omitted, no firmware
+      are used.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^channel@([0-9]|[1-5][0-9]|6[0-3])$':
+    description:
+      A channel managed by this controller
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - fsl,mpc8321-ucc-qmc-hdlc
+          - const: fsl,qe-ucc-qmc-hdlc
+          - const: fsl,qmc-hdlc
+
+      reg:
+        minimum: 0
+        maximum: 63
+        description:
+          The channel number
+
+      fsl,operational-mode:
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [transparent, hdlc]
+        default: transparent
+        description: |
+          The channel operational mode
+            - hdlc: The channel handles HDLC frames
+            - transparent: The channel handles raw data without any processing
+
+      fsl,reverse-data:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The bit order as seen on the channels is reversed,
+          transmitting/receiving the MSB of each octet first.
+          This flag is used only in 'transparent' mode.
+
+      fsl,tx-ts-mask:
+        $ref: /schemas/types.yaml#/definitions/uint64
+        description:
+          Channel assigned Tx time-slots within the Tx time-slots routed by the
+          TSA to this cell.
+
+      fsl,rx-ts-mask:
+        $ref: /schemas/types.yaml#/definitions/uint64
+        description:
+          Channel assigned Rx time-slots within the Rx time-slots routed by the
+          TSA to this cell.
+
+      fsl,framer:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description:
+          phandle to the framer node. The framer is in charge of an E1/T1 line
+          interface connected to the TDM bus. It can be used to get the E1/T1 line
+          status such as link up/down.
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              not:
+                contains:
+                  const: fsl,qmc-hdlc
+        then:
+          properties:
+            fsl,framer: false
+
+    required:
+      - reg
+      - fsl,tx-ts-mask
+      - fsl,rx-ts-mask
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - fsl,tsa-serial
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qe-fsl,tsa.h>
+
+    qmc@a60 {
+        compatible = "fsl,mpc8321-ucc-qmc", "fsl,qe-ucc-qmc";
+        reg = <0x3200 0x200>,
+              <0x10000 0x1000>;
+        reg-names = "ucc_regs", "dpram";
+        interrupts = <35>;
+        interrupt-parent = <&qeic>;
+        fsl,soft-qmc = "fsl_qe_ucode_qmc_8321_11.bin";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fsl,tsa-serial = <&tsa FSL_QE_TSA_UCC4>;
+
+        channel@16 {
+            /* Ch16 : First 4 even TS from all routed from TSA */
+            reg = <16>;
+            fsl,operational-mode = "transparent";
+            fsl,reverse-data;
+            fsl,tx-ts-mask = <0x00000000 0x000000aa>;
+            fsl,rx-ts-mask = <0x00000000 0x000000aa>;
+        };
+
+        channel@17 {
+            /* Ch17 : First 4 odd TS from all routed from TSA */
+            reg = <17>;
+            fsl,operational-mode = "transparent";
+            fsl,reverse-data;
+            fsl,tx-ts-mask = <0x00000000 0x00000055>;
+            fsl,rx-ts-mask = <0x00000000 0x00000055>;
+        };
+
+        channel@19 {
+            /* Ch19 : 8 TS (TS 8..15) from all routed from TSA */
+            compatible = "fsl,mpc8321-ucc-qmc-hdlc",
+                         "fsl,qe-ucc-qmc-hdlc",
+                         "fsl,qmc-hdlc";
+            reg = <19>;
+            fsl,operational-mode = "hdlc";
+            fsl,tx-ts-mask = <0x00000000 0x0000ff00>;
+            fsl,rx-ts-mask = <0x00000000 0x0000ff00>;
+            fsl,framer = <&framer>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe.yaml

@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QUICC Engine module (QE)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  This represents qe module that is installed on PowerQUICC II Pro.
+
+  NOTE:  This is an interim binding; it should be updated to fit
+  in with the CPM binding later in this document.
+
+  Basically, it is a bus of devices, that could act more or less
+  as a complete entity (UCC, USB etc ). All of them should be siblings on
+  the "root" qe node, using the common properties from there.
+  The description below applies to the qe of MPC8360 and
+  more nodes and properties would be extended in the future.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,qe
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+  ranges:
+    maxItems: 1
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [QE, CPM, CPM2]
+
+  bus-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the clock frequency for QUICC Engine.
+
+  fsl,qe-num-riscs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: define how many RISC engines the QE has.
+
+  fsl,qe-snums:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 28
+    description:
+      defining the array of serial number (SNUM) values for the virtual
+      threads.
+
+  fsl,firmware-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      required only if there is no fsl,qe-firmware child node
+
+      Points to a firmware node (see "QE Firmware Node" below)
+      that contains the firmware that should be uploaded for this QE.
+      The compatible property for the firmware node should say,
+      "fsl,qe-firmware".
+
+  brg-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      the internal clock source frequency for baud-rate
+      generators in Hz.
+
+  fsl,qe-num-snums:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description: |
+      define how many serial number(SNUM) the QE can use
+      for the threads. Use fsl,qe-snums instead to not only specify the
+      number of snums, but also their values.
+
+patternProperties:
+  '^muram@[a-f0-9]+$':
+    $ref: fsl,qe-muram.yaml
+
+  '^interrupt-controller@[a-f0-9]+$':
+    $ref: fsl,qe-ic.yaml
+
+  '^si@[a-f0-9]+$':
+    $ref: fsl,qe-si.yaml
+
+  '^siram@[a-f0-9]+$':
+    $ref: fsl,qe-siram.yaml
+
+required:
+  - compatible
+  - reg
+  - bus-frequency
+
+allOf:
+  - $ref: /schemas/simple-bus.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    qe-bus@e0100000 {
+        compatible = "fsl,qe", "simple-bus";
+        reg = <0xe0100000 0x480>;
+        ranges = <0 0xe0100000 0x00100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        brg-frequency = <0>;
+        bus-frequency = <0x179a7b00>;
+        fsl,qe-snums = /bits/ 8 <
+            0x04 0x05 0x0c 0x0d 0x14 0x15 0x1c 0x1d
+            0x24 0x25 0x2c 0x2d 0x34 0x35 0x88 0x89
+            0x98 0x99 0xa8 0xa9 0xb8 0xb9 0xc8 0xc9
+            0xd8 0xd9 0xe8 0xe9>;
+
+        interrupt-controller@80 {
+            compatible = "fsl,qe-ic";
+            reg = <0x80 0x80>;
+            #interrupt-cells = <1>;
+            interrupt-controller;
+            interrupts = <95 2 0 0  94 2 0 0>;
+        };
+
+        si@700 {
+            compatible = "fsl,t1040-qe-si";
+            reg = <0x700 0x80>;
+        };
+
+        siram@1000 {
+          compatible = "fsl,t1040-qe-siram";
+          reg = <0x1000 0x800>;
+        };
+
+        muram@10000 {
+            compatible = "fsl,qe-muram", "fsl,cpm-muram";
+            ranges = <0 0x00010000 0x0000c000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+              data-only@0{
+                  compatible = "fsl,qe-muram-data",
+                              "fsl,cpm-muram-data";
+                  reg = <0 0xc000>;
+              };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml

@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: High-Level Data Link Control(HDLC)
+
+description: HDLC part in Universal communication controllers (UCCs)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,ucc-hdlc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  rx-clock-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    oneOf:
+      - pattern: "^brg([0-9]|1[0-6])$"
+      - pattern: "^clk([0-9]|1[0-9]|2[0-4])$"
+
+  tx-clock-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    oneOf:
+      - pattern: "^brg([0-9]|1[0-6])$"
+      - pattern: "^clk([0-9]|1[0-9]|2[0-4])$"
+
+  fsl,tdm-interface:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Specify that hdlc is based on tdm-interface
+
+  fsl,rx-sync-clock:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: rx-sync
+    enum:
+      - none
+      - rsync_pin
+      - brg9
+      - brg10
+      - brg11
+      - brg13
+      - brg14
+      - brg15
+
+  fsl,tx-sync-clock:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: tx-sync
+    enum:
+      - none
+      - tsync_pin
+      - brg9
+      - brg10
+      - brg11
+      - brg13
+      - brg14
+      - brg15
+
+  fsl,tdm-framer-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: required for tdm interface
+    enum: [e1, t1]
+
+  fsl,tdm-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: number of TDM ID
+
+  fsl,tx-timeslot-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      required for tdm interface.
+      time slot mask for TDM operation. Indicates which time
+      slots used for transmitting and receiving.
+
+  fsl,rx-timeslot-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      required for tdm interface.
+      time slot mask for TDM operation. Indicates which time
+      slots used for transmitting and receiving.
+
+  fsl,siram-entry-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      required for tdm interface
+      Must be 0,2,4...64. the number of TDM entry.
+
+  fsl,tdm-internal-loopback:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      optional for tdm interface
+      Internal loopback connecting on TDM layer.
+
+  fsl,hmask:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description: |
+      HDLC address recognition. Set to zero to disable
+      address filtering of packets:
+      fsl,hmask = /bits/ 16 <0x0000>;
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    communication@2000 {
+        compatible = "fsl,ucc-hdlc";
+        reg = <0x2000 0x200>;
+        rx-clock-name = "clk8";
+        tx-clock-name = "clk9";
+        fsl,rx-sync-clock = "rsync_pin";
+        fsl,tx-sync-clock = "tsync_pin";
+        fsl,tx-timeslot-mask = <0xfffffffe>;
+        fsl,rx-timeslot-mask = <0xfffffffe>;
+        fsl,tdm-framer-type = "e1";
+        fsl,tdm-id = <0>;
+        fsl,siram-entry-id = <0>;
+        fsl,tdm-interface;
+    };
+
+  - |
+    communication@2000 {
+        compatible = "fsl,ucc-hdlc";
+        reg = <0x2000 0x200>;
+        rx-clock-name = "brg1";
+        tx-clock-name = "brg1";
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt

@@ -0,0 +1,56 @@
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+On CPM1 devices, all ports are using slightly different register layouts.
+Ports A, C and D are 16bit ports and Ports B and E are 32bit ports.
+
+On CPM2 devices, all ports are 32bit ports and use a common register layout.
+
+Required properties:
+- compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b",
+  "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
+  "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters (currently unused).
+- gpio-controller : Marks the port as GPIO controller.
+Optional properties:
+- fsl,cpm1-gpio-irq-mask : For banks having interrupt capability (like port C
+  on CPM1), this item tells which ports have an associated interrupt (ports are
+  listed in the same order as in PCINT register)
+- interrupts : This property provides the list of interrupt for each GPIO having
+  one as described by the fsl,cpm1-gpio-irq-mask property. There should be as
+  many interrupts as number of ones in the mask property. The first interrupt in
+  the list corresponds to the most significant bit of the mask.
+
+Example of four SOC GPIO banks defined as gpio-controller nodes:
+
+	CPM1_PIO_A: gpio-controller@950 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-a";
+		reg = <0x950 0x10>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_B: gpio-controller@ab8 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-b";
+		reg = <0xab8 0x10>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_C: gpio-controller@960 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-c";
+		reg = <0x960 0x10>;
+		fsl,cpm1-gpio-irq-mask = <0x0fff>;
+		interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>;
+		interrupt-parent = <&CPM_PIC>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_E: gpio-controller@ac8 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-e";
+		reg = <0xac8 0x18>;
+		gpio-controller;
+	};

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/firmware.txt

@@ -0,0 +1,24 @@
+* Uploaded QE firmware
+
+      If a new firmware has been uploaded to the QE (usually by the
+      boot loader), then a 'firmware' child node should be added to the QE
+      node.  This node provides information on the uploaded firmware that
+      device drivers may need.
+
+      Required properties:
+      - id: The string name of the firmware.  This is taken from the 'id'
+            member of the qe_firmware structure of the uploaded firmware.
+            Device drivers can search this string to determine if the
+            firmware they want is already present.
+      - extended-modes: The Extended Modes bitfield, taken from the
+		   firmware binary.  It is a 64-bit number represented
+		   as an array of two 32-bit numbers.
+      - virtual-traps: The virtual traps, taken from the firmware binary.
+		  It is an array of 8 32-bit numbers.
+
+Example:
+	firmware {
+		id = "Soft-UART";
+		extended-modes = <0 0>;
+		virtual-traps = <0 0 0 0 0 0 0 0>;
+	};

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt

@@ -0,0 +1,51 @@
+* Parallel I/O Ports
+
+This node configures Parallel I/O ports for CPUs with QE support.
+The node should reside in the "soc" node of the tree.  For each
+device that using parallel I/O ports, a child node should be created.
+See the definition of the Pin configuration nodes below for more
+information.
+
+Required properties:
+- device_type : should be "par_io".
+- reg : offset to the register set and its length.
+- num-ports : number of Parallel I/O ports
+
+Example:
+par_io@1400 {
+	reg = <1400 100>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	device_type = "par_io";
+	num-ports = <7>;
+	ucc_pin@1 {
+		......
+	};
+
+Note that "par_io" nodes are obsolete, and should not be used for
+the new device trees. Instead, each Par I/O bank should be represented
+via its own gpio-controller node:
+
+Required properties:
+- #gpio-cells : should be "2".
+- compatible : should be "fsl,<chip>-qe-pario-bank",
+  "fsl,mpc8323-qe-pario-bank".
+- reg : offset to the register set and its length.
+- gpio-controller : node to identify gpio controllers.
+
+Example:
+	qe_pio_a: gpio-controller@1400 {
+		#gpio-cells = <2>;
+		compatible = "fsl,mpc8360-qe-pario-bank",
+		"fsl,mpc8323-qe-pario-bank";
+		reg = <0x1400 0x18>;
+		gpio-controller;
+	  };
+
+	qe_pio_e: gpio-controller@1460 {
+		#gpio-cells = <2>;
+		compatible = "fsl,mpc8360-qe-pario-bank",
+			     "fsl,mpc8323-qe-pario-bank";
+		reg = <0x1460 0x18>;
+		gpio-controller;
+	  };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt

@@ -0,0 +1,57 @@
+* Pin configuration nodes
+
+Required properties:
+- pio-map : array of pin configurations.  Each pin is defined by 6
+  integers.  The six numbers are respectively: port, pin, dir,
+  open_drain, assignment, has_irq.
+  - port : port number of the pin; 0-6 represent port A-G in UM.
+  - pin : pin number in the port.
+  - dir : direction of the pin, should encode as follows:
+
+     0 = The pin is disabled
+     1 = The pin is an output
+     2 = The pin is an input
+     3 = The pin is I/O
+
+  - open_drain : indicates the pin is normal or wired-OR:
+
+     0 = The pin is actively driven as an output
+     1 = The pin is an open-drain driver. As an output, the pin is
+         driven active-low, otherwise it is three-stated.
+
+  - assignment : function number of the pin according to the Pin Assignment
+    tables in User Manual.  Each pin can have up to 4 possible functions in
+    QE and two options for CPM.
+  - has_irq : indicates if the pin is used as source of external
+    interrupts.
+
+Example:
+     ucc_pin@1 {
+	pio-map = <
+	/* port  pin  dir  open_drain  assignment  has_irq */
+		0  3  1  0  1  0 	/* TxD0 */
+		0  4  1  0  1  0 	/* TxD1 */
+		0  5  1  0  1  0 	/* TxD2 */
+		0  6  1  0  1  0 	/* TxD3 */
+		1  6  1  0  3  0 	/* TxD4 */
+		1  7  1  0  1  0 	/* TxD5 */
+		1  9  1  0  2  0 	/* TxD6 */
+		1  a  1  0  2  0 	/* TxD7 */
+		0  9  2  0  1  0 	/* RxD0 */
+		0  a  2  0  1  0 	/* RxD1 */
+		0  b  2  0  1  0 	/* RxD2 */
+		0  c  2  0  1  0 	/* RxD3 */
+		0  d  2  0  1  0 	/* RxD4 */
+		1  1  2  0  2  0 	/* RxD5 */
+		1  0  2  0  2  0 	/* RxD6 */
+		1  4  2  0  2  0 	/* RxD7 */
+		0  7  1  0  1  0 	/* TX_EN */
+		0  8  1  0  1  0 	/* TX_ER */
+		0  f  2  0  1  0 	/* RX_DV */
+		0  10 2  0  1  0 	/* RX_ER */
+		0  0  2  0  1  0 	/* RX_CLK */
+		2  9  1  0  3  0 	/* GTX_CLK - CLK10 */
+		2  8  2  0  1  0>;	/* GTX125 - CLK9 */
+     };
+
+

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt

@@ -0,0 +1,68 @@
+* UCC (Unified Communications Controllers)
+
+Required properties:
+- device_type : should be "network", "hldc", "uart", "transparent"
+  "bisync", "atm", or "serial".
+- compatible : could be "ucc_geth" or "fsl_atm" and so on.
+- cell-index : the ucc number(1-8), corresponding to UCCx in UM.
+- reg : Offset and length of the register set for the device
+- interrupts : <a b> where a is the interrupt number and b is a
+  field that represents an encoding of the sense and level
+  information for the interrupt.  This should be encoded based on
+  the information in section 2) depending on the type of interrupt
+  controller you have.
+- pio-handle : The phandle for the Parallel I/O port configuration.
+- port-number : for UART drivers, the port number to use, between 0 and 3.
+  This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0.
+  The port number is added to the minor number of the device.  Unlike the
+  CPM UART driver, the port-number is required for the QE UART driver.
+- soft-uart : for UART drivers, if specified this means the QE UART device
+  driver should use "Soft-UART" mode, which is needed on some SOCs that have
+  broken UART hardware.  Soft-UART is provided via a microcode upload.
+- rx-clock-name: the UCC receive clock source
+  "none": clock source is disabled
+  "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+  "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+- tx-clock-name: the UCC transmit clock source
+  "none": clock source is disabled
+  "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+  "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+The following two properties are deprecated.  rx-clock has been replaced
+with rx-clock-name, and tx-clock has been replaced with tx-clock-name.
+Drivers that currently use the deprecated properties should continue to
+do so, in order to support older device trees, but they should be updated
+to check for the new properties first.
+- rx-clock : represents the UCC receive clock source.
+  0x00 : clock source is disabled;
+  0x1~0x10 : clock source is BRG1~BRG16 respectively;
+  0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively.
+- tx-clock: represents the UCC transmit clock source;
+  0x00 : clock source is disabled;
+  0x1~0x10 : clock source is BRG1~BRG16 respectively;
+  0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively.
+
+Required properties for network device_type:
+- mac-address : list of bytes representing the ethernet address.
+- phy-handle : The phandle for the PHY connected to this controller.
+
+Recommended properties:
+- phy-connection-type : a string naming the controller/PHY interface type,
+  i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal
+  Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only),
+  "tbi", or "rtbi".
+
+Example:
+	ucc@2000 {
+		device_type = "network";
+		compatible = "ucc_geth";
+		cell-index = <1>;
+		reg = <2000 200>;
+		interrupts = <a0 0>;
+		interrupt-parent = <700>;
+		mac-address = [ 00 04 9f 00 23 23 ];
+		rx-clock = "none";
+		tx-clock = "clk9";
+		phy-handle = <212000>;
+		phy-connection-type = "gmii";
+		pio-handle = <140001>;
+	};

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt

@@ -0,0 +1,36 @@
+Freescale QUICC Engine USB Controller
+
+Required properties:
+- compatible : should be "fsl,<chip>-qe-usb", "fsl,mpc8323-qe-usb".
+- reg : the first two cells should contain usb registers location and
+  length, the next two two cells should contain PRAM location and
+  length.
+- interrupts : should contain USB interrupt.
+- fsl,fullspeed-clock : specifies the full speed USB clock source:
+  "none": clock source is disabled
+  "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+  "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+- fsl,lowspeed-clock : specifies the low speed USB clock source:
+  "none": clock source is disabled
+  "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+  "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+- hub-power-budget : USB power budget for the root hub, in mA.
+- gpios : should specify GPIOs in this order: USBOE, USBTP, USBTN, USBRP,
+  USBRN, SPEED (optional), and POWER (optional).
+
+Example:
+
+usb@6c0 {
+	compatible = "fsl,mpc8360-qe-usb", "fsl,mpc8323-qe-usb";
+	reg = <0x6c0 0x40 0x8b00 0x100>;
+	interrupts = <11>;
+	interrupt-parent = <&qeic>;
+	fsl,fullspeed-clock = "clk21";
+	gpios = <&qe_pio_b  2 0 /* USBOE */
+		 &qe_pio_b  3 0 /* USBTP */
+		 &qe_pio_b  8 0 /* USBTN */
+		 &qe_pio_b  9 0 /* USBRP */
+		 &qe_pio_b 11 0 /* USBRN */
+		 &qe_pio_e 20 0 /* SPEED */
+		 &qe_pio_e 21 0 /* POWER */>;
+};

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/serial.txt

@@ -0,0 +1,32 @@
+* Serial
+
+Currently defined compatibles:
+- fsl,cpm1-smc-uart
+- fsl,cpm2-smc-uart
+- fsl,cpm1-scc-uart
+- fsl,cpm2-scc-uart
+- fsl,qe-uart
+
+Modem control lines connected to GPIO controllers are listed in the gpios
+property as described in booting-without-of.txt, section IX.1 in the following
+order:
+
+CTS, RTS, DCD, DSR, DTR, and RI.
+
+The gpios property is optional and can be left out when control lines are
+not used.
+
+Example:
+
+	serial@11a00 {
+		device_type = "serial";
+		compatible = "fsl,mpc8272-scc-uart",
+			     "fsl,cpm2-scc-uart";
+		reg = <11a00 20 8000 100>;
+		interrupts = <28 8>;
+		interrupt-parent = <&PIC>;
+		fsl,cpm-brg = <1>;
+		fsl,cpm-command = <00800000>;
+		gpios = <&gpio_c 15 0
+			 &gpio_d 29 0>;
+	};

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/cpm_qe/uqe_serial.txt

@@ -0,0 +1,17 @@
+* Serial
+
+Required Properties:
+compatible : must be "fsl,<chip>-ucc-uart". For t1040, must be
+"fsl,t1040-ucc-uart".
+port-number : port number of UCC-UART
+tx/rx-clock-name : should be "brg1"-"brg16" for internal clock source,
+		   should be "clk1"-"clk28" for external clock source.
+
+Example:
+
+	ucc_serial: ucc@2200 {
+		compatible = "fsl,t1040-ucc-uart";
+		port-number = <0>;
+		rx-clock-name = "brg2";
+		tx-clock-name = "brg2";
+	};

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/fsl,bman-portal.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,bman-portal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Queue Manager Portals
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  QorIQ DPAA Buffer Manager Portal
+
+  Portals are memory mapped interfaces to BMan that allow low-latency, lock-less
+  interaction by software running on processor cores, accelerators and network
+  interfaces with the BMan
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,bman-portal
+      - items:
+          - enum:
+              - fsl,bman-portal-1.0.0
+              - fsl,ls1043a-bmap-portal
+              - fsl,ls1046a-bmap-portal
+          - const: fsl,bman-portal
+  reg:
+    items:
+      - description: the cache-enabled region of the portal
+      - description: the cache-inhibited region of the portal
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bman-portal@0 {
+        compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
+        reg = <0x0 0x4000>, <0x100000 0x1000>;
+        interrupts = <105 IRQ_TYPE_EDGE_FALLING 0 0>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/fsl,bman.yaml

@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,bman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Buffer Manager
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA).
+  BMan supports hardware allocation and deallocation of buffers belonging to
+  pools originally created by software with configurable depletion thresholds.
+  This binding covers the CCSR space programming model
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,bman
+      - items:
+          - enum:
+              - fsl,ls1043a-bman
+              - fsl,ls1046a-bman
+          - const: fsl,bman
+
+  reg:
+    items:
+      - description: |
+          Registers region within the CCSR address space
+
+          The BMan revision information is located in the BMAN_IP_REV_1/2
+          registers which are located at offsets 0xbf8 and 0xbfc
+
+  interrupts:
+    items:
+      - description: The error interrupt
+
+  memory-region:
+    minItems: 1
+    maxItems: 2
+    description:
+      List of phandles referencing the BMan private memory
+      nodes (described below). The bman-fqd node must be
+      first followed by bman-pfdr node. Only used on ARM
+
+      Devices connected to a BMan instance via Direct Connect Portals (DCP) must link
+      to the respective BMan instance
+
+  fsl,bman-portals:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: ref fsl,bman-port.yaml
+
+  fsl,liodn:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      See pamu.txt, PAMU property used for static LIODN assignment
+
+  fsl,iommu-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      See pamu.txt, PAMU property used for dynamic LIODN assignment
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bman@31a000 {
+        compatible = "fsl,bman";
+        reg = <0x31a000 0x1000>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING 1 2>;
+        fsl,liodn = <0x17>;
+        fsl,bman-portals = <&bportals>;
+        memory-region = <&bman_fbpr>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/fsl,imx23-digctl.yaml

@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,imx23-digctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale mxs digctrl for i.MX23/i.MX28
+
+description: |
+  The digital control block provides overall control of various items within
+  the top digital block of the chip, including:
+    - Default first-level page table (DFLPT) controls
+    - HCLK performance counter
+    - Free-running microseconds counter
+    - Entropy control
+    - BIST controls for ARM Core and On-Chip RAM
+    - Chip Revision register
+    - USB loop back congtrol
+    - Other miscellaneous controls
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx28-digctl
+          - const: fsl,imx23-digctl
+      - const: fsl,imx23-digctl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    digctl@8001c000 {
+        compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
+        reg = <0x8001c000 0x2000>;
+        interrupts = <89>;
+    };
+

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml

@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-dcfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Device Configuration Unit
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  DCFG is the device configuration unit, that provides general purpose
+  configuration and status for the device. Such as setting the secondary
+  core start address and release the secondary core from holdoff and
+  startup.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,ls1012a-dcfg
+              - fsl,ls1021a-dcfg
+              - fsl,ls1043a-dcfg
+              - fsl,ls1046a-dcfg
+              - fsl,ls1088a-dcfg
+              - fsl,ls2080a-dcfg
+              - fsl,lx2160a-dcfg
+          - const: syscon
+
+      - items:
+          - enum:
+              - fsl,ls1028a-dcfg
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+  big-endian: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^clock-controller@[0-9a-f]+$":
+    $ref: /schemas/clock/fsl,flexspi-clock.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1ee0000 {
+        compatible = "fsl,ls1021a-dcfg", "syscon";
+        reg = <0x1ee0000 0x10000>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml

@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-scfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Supplemental Configuration Unit
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  SCFG is the supplemental configuration unit, that provides SoC specific
+  configuration and status registers for the chip. Such as getting PEX port
+  status.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,ls1012a-scfg
+          - fsl,ls1021a-scfg
+          - fsl,ls1028a-scfg
+          - fsl,ls1043a-scfg
+          - fsl,ls1046a-scfg
+          - fsl,ls1088a-isc
+          - fsl,ls2080a-isc
+          - fsl,lx2160a-isc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+  big-endian: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^interrupt-controller@[a-f0-9]+$":
+    $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1570000 {
+        compatible = "fsl,ls1021a-scfg", "syscon";
+        reg = <0x1570000 0x10000>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,ls1028a-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Reset Registers Module
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  Reset Module includes chip reset, service processor control and Reset Control
+  Word (RCW) status.
+
+properties:
+  $nodename:
+    pattern: "^syscon@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - fsl,ls1028a-reset
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+
+  reboot:
+    $ref: /schemas/power/reset/syscon-reboot.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - reboot
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1e60000 {
+        compatible = "fsl,ls1028a-reset", "syscon", "simple-mfd";
+        reg = <0x1e60000 0x10000>;
+        little-endian;
+
+        reboot {
+            compatible = "syscon-reboot";
+            offset = <0>;
+            mask = <0x02>;
+        };
+    };
+

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/fsl,qman-fqd.yaml

@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,qman-fqd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QMan Private Memory Nodes
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  QMan requires two contiguous range of physical memory used for the backing store
+  for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
+  This memory is reserved/allocated as a node under the /reserved-memory node.
+
+  BMan requires a contiguous range of physical memory used for the backing store
+  for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as
+  a node under the /reserved-memory node.
+
+  The QMan FQD memory node must be named "qman-fqd"
+  The QMan PFDR memory node must be named "qman-pfdr"
+  The BMan FBPR memory node must be named "bman-fbpr"
+
+  The following constraints are relevant to the FQD and PFDR private memory:
+    - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
+      1 GiB
+    - The alignment must be a muliptle of the memory size
+
+  The size of the FQD and PFDP must be chosen by observing the hardware features
+  configured via the Reset Configuration Word (RCW) and that are relevant to a
+  specific board (e.g. number of MAC(s) pinned-out, number of offline/host command
+  FMan ports, etc.). The size configured in the DT must reflect the hardware
+  capabilities and not the specific needs of an application
+
+  For additional details about reserved memory regions see
+  reserved-memory/reserved-memory.yaml in dtschema project.
+
+properties:
+  $nodename:
+    pattern: '^(qman-fqd|qman-pfdr|bman-fbpr)+$'
+
+  compatible:
+    enum:
+      - fsl,qman-fqd
+      - fsl,qman-pfdr
+      - fsl,bman-fbpr
+
+required:
+  - compatible
+
+allOf:
+  - $ref: /schemas/reserved-memory/reserved-memory.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qman-fqd {
+            compatible = "fsl,qman-fqd";
+            size = <0 0x400000>;
+            alignment = <0 0x400000>;
+            no-map;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/fsl,qman-portal.yaml

@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,qman-portal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Queue Manager Portals
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  Portals are memory mapped interfaces to QMan that allow low-latency, lock-less
+  interaction by software running on processor cores, accelerators and network
+  interfaces with the QMan
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,qman-portal
+      - items:
+          - enum:
+              - fsl,ls1043-qman-portal
+              - fsl,ls1046-qman-portal
+              - fsl,qman-portal-1.2.0
+          - const: fsl,qman-portal
+
+  reg:
+    items:
+      - description: the cache-enabled region of the portal
+      - description: the cache-inhibited region of the portal
+
+  interrupts:
+    maxItems: 1
+
+  fsl,liodn:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
+    description: See pamu.txt. Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN
+      (FLIODN)
+
+  fsl,iommu-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: See pamu.txt.
+
+  fsl,qman-channel-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: qman channel id.
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The hardware index of the channel. This can also be
+      determined by dividing any of the channel's 8 work queue
+      IDs by 8
+
+      In addition to these properties the qman-portals should have sub-nodes to
+      represent the HW devices/portals that are connected to the software portal
+      described here
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+patternProperties:
+  '^(fman0|fman1|pme|crypto)+$':
+    type: object
+    properties:
+      fsl,liodn:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: See pamu.txt, PAMU property used for static LIODN assignment
+
+      fsl,iommu-parent:
+        description: See pamu.txt, PAMU property used for dynamic LIODN assignment
+
+      dev-handle:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description:
+          The phandle to the particular hardware device that this
+          portal is connected to.
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    qman-portal@0 {
+        compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
+        reg = <0 0x4000>, <0x100000 0x1000>;
+        interrupts = <104 IRQ_TYPE_EDGE_FALLING 0 0>;
+        fsl,liodn = <1 2>;
+        fsl,qman-channel-id = <0>;
+
+        fman0 {
+            fsl,liodn = <0x21>;
+            dev-handle = <&fman0>;
+        };
+
+        fman1 {
+            fsl,liodn = <0xa1>;
+            dev-handle = <&fman1>;
+        };
+
+        crypto {
+            fsl,liodn = <0x41 0x66>;
+            dev-handle = <&crypto>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/fsl,qman.yaml

@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,qman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QorIQ DPAA Queue Manager
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
+  supports queuing and QoS scheduling of frames to CPUs, network interfaces and
+  DPAA logic modules, maintains packet ordering within flows. Besides providing
+  flow-level queuing, is also responsible for congestion management functions such
+  as RED/WRED, congestion notifications and tail discards. This binding covers the
+  CCSR space programming model
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,qman
+      - items:
+          - enum:
+              - fsl,ls1043a-qman
+              - fsl,ls1046a-qman
+          - const: fsl,qman
+  reg:
+    items:
+      - description: |
+          Registers region within the CCSR address space
+
+          The QMan revision information is located in the QMAN_IP_REV_1/2
+          registers which are located at offsets 0xbf8 and 0xbfc
+
+  interrupts:
+    items:
+      - description: The error interrupt
+
+  fsl,qman-portals:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: ref fsl,qman-port.yaml
+
+  fsl,liodn:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      See pamu.txt, PAMU property used for static LIODN assignment
+
+  fsl,iommu-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      See pamu.txt, PAMU property used for dynamic LIODN assignment
+
+  clocks:
+    maxItems: 1
+    description:
+      Reference input clock. Its frequency is half of the platform clock
+
+  memory-region:
+    maxItems: 2
+    description:
+      List of phandles referencing the QMan private memory nodes (described
+      below). The qman-fqd node must be first followed by qman-pfdr node.
+      Only used on ARM Devices connected to a QMan instance via Direct Connect
+      Portals (DCP) must link to the respective QMan instance.
+
+  fsl,qman:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      List of phandle and DCP index pairs, to the QMan instance
+      to which this device is connected via the DCP
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    qman: qman@318000 {
+        compatible = "fsl,qman";
+        reg = <0x318000 0x1000>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING 1 3>;
+        fsl,liodn = <0x16>;
+        fsl,qman-portals = <&qportals>;
+        memory-region = <&qman_fqd &qman_pfdr>;
+        clocks = <&platform_pll 1>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/fsl,rcpm.yaml

@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,rcpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Run Control and Power Management
+
+description:
+  The RCPM performs all device-level tasks associated with device run control
+  and power management.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,p2041-rcpm
+              - fsl,p3041-rcpm
+              - fsl,p4080-rcpm
+              - fsl,p5020-rcpm
+              - fsl,p5040-rcpm
+          - const: fsl,qoriq-rcpm-1.0
+      - items:
+          - enum:
+              - fsl,b4420-rcpm
+              - fsl,b4860-rcpm
+              - fsl,t4240-rcpm
+          - const: fsl,qoriq-rcpm-2.0
+      - items:
+          - enum:
+              - fsl,t1040-rcpm
+          - const: fsl,qoriq-rcpm-2.1
+      - items:
+          - enum:
+              - fsl,ls1012a-rcpm
+              - fsl,ls1021a-rcpm
+              - fsl,ls1028a-rcpm
+              - fsl,ls1043a-rcpm
+              - fsl,ls1046a-rcpm
+              - fsl,ls1088a-rcpm
+              - fsl,ls208xa-rcpm
+              - fsl,lx2160a-rcpm
+          - const: fsl,qoriq-rcpm-2.1+
+
+  reg:
+    maxItems: 1
+
+  "#fsl,rcpm-wakeup-cells":
+    description: |
+      The number of IPPDEXPCR register cells in the
+      fsl,rcpm-wakeup property.
+
+      Freescale RCPM Wakeup Source Device Tree Bindings
+
+      Required fsl,rcpm-wakeup property should be added to a device node if
+      the device can be used as a wakeup source.
+
+      fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
+      register cells. The number of IPPDEXPCR register cells is defined in
+      "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is
+      the bit mask that should be set in IPPDEXPCR0, and the second register
+      cell is for IPPDEXPCR1, and so on.
+
+      Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a
+      mechanism for keeping certain blocks awake during STANDBY and MEM, in
+      order to use them as wake-up sources.
+
+  little-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      RCPM register block is Little Endian. Without it RCPM
+      will be Big Endian (default case).
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    global-utilities@e2000 {
+          compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
+          reg = <0xe2000 0x1000>;
+          #fsl,rcpm-wakeup-cells = <2>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/fsl,vf610-src.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,vf610-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale vf610 System Reset Controller (SRC)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  IC reference manual calls it as SRC, but it is not module as reset
+  controller, which used to reset individual device. SRC works as reboot
+  controller, which reboots whole system. It provides a syscon interface to
+  syscon-reboot.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,vf610-src
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    syscon@4006e000 {
+        compatible = "fsl,vf610-src", "syscon";
+        reg = <0x4006e000 0x1000>;
+        interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
+    };
+

linux-7.2.3/Documentation/devicetree/bindings/soc/fsl/guts.txt

@@ -0,0 +1,44 @@
+* Global Utilities Block
+
+The global utilities block controls power management, I/O device
+enabling, power-on-reset configuration monitoring, general-purpose
+I/O signal configuration, alternate function selection for multiplexed
+signals, and clock control.
+
+Required properties:
+
+ - compatible : Should define the compatible device type for
+   global-utilities.
+   Possible compatibles:
+	"fsl,qoriq-device-config-1.0"
+	"fsl,qoriq-device-config-2.0"
+	"fsl,<chip>-device-config"
+	"fsl,<chip>-guts"
+ - reg : Offset and length of the register set for the device.
+
+Recommended properties:
+
+ - fsl,has-rstcr : Indicates that the global utilities register set
+   contains a functioning "reset control register" (i.e. the board
+   is wired to reset upon setting the HRESET_REQ bit in this register).
+
+ - fsl,liodn-bits : Indicates the number of defined bits in the LIODN
+   registers, for those SOCs that have a PAMU device.
+
+ - little-endian : Indicates that the global utilities block is little
+   endian. The default is big endian.
+
+Examples:
+	global-utilities@e0000 {	/* global utilities block */
+		compatible = "fsl,mpc8548-guts";
+		reg = <e0000 1000>;
+		fsl,has-rstcr;
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};

linux-7.2.3/Documentation/devicetree/bindings/soc/google/google,gs101-pmu-intr-gen.yaml

@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/google/google,gs101-pmu-intr-gen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Power Management Unit (PMU) Interrupt Generation
+
+description: |
+  PMU interrupt generator for handshaking between PMU through interrupts.
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+properties:
+  compatible:
+    items:
+      - const: google,gs101-pmu-intr-gen
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmu_intr_gen: syscon@17470000 {
+      compatible = "google,gs101-pmu-intr-gen", "syscon";
+      reg = <0x17470000 0x10000>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml

@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Kirin 960 USB OTG Battery Charging Syscon
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,hi3660-usb3-otg-bc
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  usb-phy:
+    $ref: /schemas/phy/hisilicon,hi3660-usb3.yaml
+    description: USB Phy node
+
+required:
+  - compatible
+  - reg
+  - usb-phy
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@ff200000 {
+        compatible = "hisilicon,hi3660-usb3-otg-bc", "syscon", "simple-mfd";
+        reg = <0xff200000 0x1000>;
+
+        usb-phy {
+            compatible = "hisilicon,hi3660-usb-phy";
+            #phy-cells = <0>;
+            hisilicon,pericrg-syscon = <&crg_ctrl>;
+            hisilicon,pctrl-syscon = <&pctrl>;
+            hisilicon,eye-diagram-param = <0x22466e4>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,aips-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX AHB to IP Bridge
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  This particular peripheral is designed as the bridge between
+  AHB bus and peripherals with the lower bandwidth IP Slave (IPS)
+  buses.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: fsl,aips-bus
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/simple-bus.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fsl,aips-bus
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus@30000000 {
+      compatible = "fsl,aips-bus", "simple-bus";
+      reg = <0x30000000 0x400000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/soc/imx/fsl,imx-anatop.yaml

@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx-anatop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ANATOP register
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6sl-anatop
+              - fsl,imx6sll-anatop
+              - fsl,imx6sx-anatop
+              - fsl,imx6ul-anatop
+              - fsl,imx7d-anatop
+          - const: fsl,imx6q-anatop
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - const: fsl,imx6q-anatop
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Temperature sensor event
+      - description: Brown-out event on either of the support regulators
+      - description: Brown-out event on either the core, gpu or soc regulators
+    minItems: 2
+
+  tempmon:
+    type: object
+    unevaluatedProperties: false
+    $ref: /schemas/thermal/imx-thermal.yaml
+
+patternProperties:
+  "regulator-((1p1)|(2p5)|(3p0)|(vdd1p0d)|(vdd1p2)|(vddcore)|(vddpcie)|(vddpu)|(vddsoc))$":
+    type: object
+    unevaluatedProperties: false
+    $ref: /schemas/regulator/anatop-regulator.yaml
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx7d-anatop
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+    else:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 3
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6ul-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    anatop: anatop@20c8000 {
+        compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
+                     "syscon", "simple-mfd";
+        reg = <0x020c8000 0x1000>;
+        interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+        reg_3p0: regulator-3p0 {
+            compatible = "fsl,anatop-regulator";
+            regulator-name = "vdd3p0";
+            regulator-min-microvolt = <2625000>;
+            regulator-max-microvolt = <3400000>;
+            anatop-reg-offset = <0x120>;
+            anatop-vol-bit-shift = <8>;
+            anatop-vol-bit-width = <5>;
+            anatop-min-bit-val = <0>;
+            anatop-min-voltage = <2625000>;
+            anatop-max-voltage = <3400000>;
+            anatop-enable-bit = <0>;
+        };
+
+        reg_arm: regulator-vddcore {
+            compatible = "fsl,anatop-regulator";
+            regulator-name = "cpu";
+            regulator-min-microvolt = <725000>;
+            regulator-max-microvolt = <1450000>;
+            regulator-always-on;
+            anatop-reg-offset = <0x140>;
+            anatop-vol-bit-shift = <0>;
+            anatop-vol-bit-width = <5>;
+            anatop-delay-reg-offset = <0x170>;
+            anatop-delay-bit-shift = <24>;
+            anatop-delay-bit-width = <2>;
+            anatop-min-bit-val = <1>;
+            anatop-min-voltage = <725000>;
+            anatop-max-voltage = <1450000>;
+        };
+
+        reg_soc: regulator-vddsoc {
+            compatible = "fsl,anatop-regulator";
+            regulator-name = "vddsoc";
+            regulator-min-microvolt = <725000>;
+            regulator-max-microvolt = <1450000>;
+            regulator-always-on;
+            anatop-reg-offset = <0x140>;
+            anatop-vol-bit-shift = <18>;
+            anatop-vol-bit-width = <5>;
+            anatop-delay-reg-offset = <0x170>;
+            anatop-delay-bit-shift = <28>;
+            anatop-delay-bit-width = <2>;
+            anatop-min-bit-val = <1>;
+            anatop-min-voltage = <725000>;
+            anatop-max-voltage = <1450000>;
+        };
+
+        tempmon: tempmon {
+            compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
+            interrupt-parent = <&gpc>;
+            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+            fsl,tempmon = <&anatop>;
+            nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+            nvmem-cell-names = "calib", "temp_grade";
+            clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+            #thermal-sensor-cells = <0>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml

@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx-iomuxc-gpr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IOMUX Controller General Purpose Registers
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description:
+  i.MX Processors have an IOMUXC General Purpose Register group for
+  various System Settings
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6q-iomuxc-gpr
+              - fsl,imx8mq-iomuxc-gpr
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - enum:
+              - fsl,imx6sl-iomuxc-gpr
+              - fsl,imx6sll-iomuxc-gpr
+              - fsl,imx6ul-iomuxc-gpr
+          - const: fsl,imx6q-iomuxc-gpr
+          - const: syscon
+      - items:
+          - enum:
+              - fsl,imx6sx-iomuxc-gpr
+              - fsl,imx7d-iomuxc-gpr
+          - const: fsl,imx6q-iomuxc-gpr
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - enum:
+              - fsl,imx53-iomuxc-gpr
+              - fsl,imx8mm-iomuxc-gpr
+              - fsl,imx8mn-iomuxc-gpr
+              - fsl,imx8mp-iomuxc-gpr
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  mux-controller:
+    type: object
+    $ref: /schemas/mux/reg-mux.yaml
+
+patternProperties:
+  "^ipu[12]_csi[01]_mux$":
+    type: object
+    $ref: /schemas/media/video-mux.yaml
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: fsl,imx6q-iomuxc-gpr
+    then:
+      patternProperties:
+        '^ipu[12]_csi[01]_mux$': false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc_gpr: syscon@30340000 {
+        compatible = "fsl,imx8mq-iomuxc-gpr", "syscon", "simple-mfd";
+        reg = <0x30340000 0x10000>;
+
+        mux: mux-controller {
+            compatible = "mmio-mux";
+            #mux-control-cells = <1>;
+            mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml

@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MM DISP blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MM DISP blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the display and MIPI CSI
+  peripherals located in the DISP domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mm-disp-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 5
+    maxItems: 5
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: csi-bridge
+      - const: lcdif
+      - const: mipi-dsi
+      - const: mipi-csi
+
+  clocks:
+    minItems: 10
+    maxItems: 10
+
+  clock-names:
+    items:
+      - const: csi-bridge-axi
+      - const: csi-bridge-apb
+      - const: csi-bridge-core
+      - const: lcdif-axi
+      - const: lcdif-apb
+      - const: lcdif-pix
+      - const: dsi-pclk
+      - const: dsi-ref
+      - const: csi-aclk
+      - const: csi-pclk
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/power/imx8mm-power.h>
+
+    blk-ctrl@32e28000 {
+      compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
+      reg = <0x32e28000 0x100>;
+      power-domains = <&pgc_dispmix>, <&pgc_dispmix>, <&pgc_dispmix>,
+                      <&pgc_mipi>, <&pgc_mipi>;
+      power-domain-names = "bus", "csi-bridge", "lcdif",
+                           "mipi-dsi", "mipi-csi";
+      clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+               <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+               <&clk IMX8MM_CLK_CSI1_ROOT>,
+               <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+               <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+               <&clk IMX8MM_CLK_DISP_ROOT>,
+               <&clk IMX8MM_CLK_DSI_CORE>,
+               <&clk IMX8MM_CLK_DSI_PHY_REF>,
+               <&clk IMX8MM_CLK_CSI1_CORE>,
+               <&clk IMX8MM_CLK_CSI1_PHY_REF>;
+       clock-names = "csi-bridge-axi", "csi-bridge-apb", "csi-bridge-core",
+                     "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
+                     "dsi-ref", "csi-aclk", "csi-pclk";
+       #power-domain-cells = <1>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml

@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MM VPU blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MM VPU blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the VPU peripherals
+  located in the VPU domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mm-vpu-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 4
+
+  power-domain-names:
+    maxItems: 4
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    maxItems: 3
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mm-vpu-blk-ctrl
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: bus power domain
+            - description: G1 decoder power domain
+            - description: G2 decoder power domain
+            - description: H1 encoder power domain
+
+        power-domain-names:
+          items:
+            - const: bus
+            - const: g1
+            - const: g2
+            - const: h1
+
+        clocks:
+          items:
+            - description: G1 decoder clk
+            - description: G2 decoder clk
+            - description: H1 encoder clk
+
+        clock-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: h1
+
+        interconnects:
+          items:
+            - description: G1 decoder interconnect
+            - description: G2 decoder interconnect
+            - description: H1 encoder power domain
+
+        interconnect-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: h1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-vpu-blk-ctrl
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: bus power domain
+            - description: G1 decoder power domain
+            - description: G2 decoder power domain
+            - description: VC8000E encoder power domain
+
+        power-domain-names:
+          items:
+            - const: bus
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
+        clocks:
+          items:
+            - description: G1 decoder clk
+            - description: G2 decoder clk
+            - description: VC8000E encoder clk
+
+        clock-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
+        interconnects:
+          items:
+            - description: G1 decoder interconnect
+            - description: G2 decoder interconnect
+            - description: VC8000E encoder interconnect
+
+        interconnect-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/power/imx8mm-power.h>
+
+    blk-ctrl@38330000 {
+      compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
+      reg = <0x38330000 0x100>;
+      power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
+                      <&pgc_vpu_g2>, <&pgc_vpu_h1>;
+      power-domain-names = "bus", "g1", "g2", "h1";
+      clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
+               <&clk IMX8MM_CLK_VPU_G2_ROOT>,
+               <&clk IMX8MM_CLK_VPU_H1_ROOT>;
+      clock-names = "g1", "g2", "h1";
+      #power-domain-cells = <1>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml

@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MN DISP blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the display and MIPI CSI
+  peripherals located in the DISP domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mn-disp-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 5
+    maxItems: 5
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: isi
+      - const: lcdif
+      - const: mipi-dsi
+      - const: mipi-csi
+
+  clocks:
+    minItems: 11
+    maxItems: 11
+
+  clock-names:
+    items:
+      - const: disp_axi
+      - const: disp_apb
+      - const: disp_axi_root
+      - const: disp_apb_root
+      - const: lcdif-axi
+      - const: lcdif-apb
+      - const: lcdif-pix
+      - const: dsi-pclk
+      - const: dsi-ref
+      - const: csi-aclk
+      - const: csi-pclk
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+    #include <dt-bindings/power/imx8mn-power.h>
+
+    blk-ctrl@32e28000 {
+      compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
+      reg = <0x32e28000 0x100>;
+      power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+                      <&pgc_dispmix>, <&pgc_mipi>,
+                      <&pgc_mipi>;
+      power-domain-names = "bus", "isi", "lcdif", "mipi-dsi",
+                           "mipi-csi";
+      clocks = <&clk IMX8MN_CLK_DISP_AXI>,
+               <&clk IMX8MN_CLK_DISP_APB>,
+               <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+               <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+               <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+               <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+               <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+               <&clk IMX8MN_CLK_DSI_CORE>,
+               <&clk IMX8MN_CLK_DSI_PHY_REF>,
+               <&clk IMX8MN_CLK_CSI1_PHY_REF>,
+               <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
+       clock-names = "disp_axi", "disp_apb", "disp_axi_root", "disp_apb_root",
+                     "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
+                     "dsi-ref", "csi-aclk", "csi-pclk";
+       #power-domain-cells = <1>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml

@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP HDMI blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MP HDMMI blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the display pipeline
+  peripherals located in the HDMI domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mp-hdmi-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 10
+    maxItems: 10
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: irqsteer
+      - const: lcdif
+      - const: pai
+      - const: pvi
+      - const: trng
+      - const: hdmi-tx
+      - const: hdmi-tx-phy
+      - const: hdcp
+      - const: hrv
+
+  clocks:
+    minItems: 5
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: ref_266m
+      - const: ref_24m
+      - const: fdcc
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    items:
+      - const: hrv
+      - const: lcdif-hdmi
+      - const: hdcp
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    blk-ctrl@32fc0000 {
+        compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon";
+        reg = <0x32fc0000 0x23c>;
+        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+                 <&clk IMX8MP_CLK_HDMI_ROOT>,
+                 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+                 <&clk IMX8MP_CLK_HDMI_24M>,
+                 <&clk IMX8MP_CLK_HDMI_FDCC_TST>;
+        clock-names = "apb", "axi", "ref_266m", "ref_24m", "fdcc";
+        power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
+                        <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
+                        <&pgc_hdmimix>, <&pgc_hdmi_phy>,
+                        <&pgc_hdmimix>, <&pgc_hdmimix>;
+        power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng",
+                             "hdmi-tx", "hdmi-tx-phy",
+                             "hdcp", "hrv";
+        #power-domain-cells = <1>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml

@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP HSIO blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MP HSIO blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the high-speed IO
+  (USB an PCIe) peripherals located in the HSIO domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mp-hsio-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 6
+    maxItems: 6
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: usb
+      - const: usb-phy1
+      - const: usb-phy2
+      - const: pcie
+      - const: pcie-phy
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: usb
+      - const: pcie
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: noc-pcie
+      - const: usb1
+      - const: usb2
+      - const: pcie
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    blk-ctrl@32f10000 {
+        compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
+        reg = <0x32f10000 0x24>;
+        clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+                 <&clk IMX8MP_CLK_PCIE_ROOT>;
+        clock-names = "usb", "pcie";
+        power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>,
+                        <&pgc_usb1_phy>, <&pgc_usb2_phy>,
+                        <&pgc_hsiomix>, <&pgc_pcie_phy>;
+        power-domain-names = "bus", "usb", "usb-phy1",
+                             "usb-phy2", "pcie", "pcie-phy";
+        #power-domain-cells = <1>;
+        #clock-cells = <0>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml

@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP Media Block Control
+
+maintainers:
+  - Paul Elder <paul.elder@ideasonboard.com>
+
+description:
+  The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level peripheral
+  providing access to the NoC and ensuring proper power sequencing of the
+  peripherals within the MEDIAMIX domain.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mp-media-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 10
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: mipi-dsi1
+      - const: mipi-csi1
+      - const: lcdif1
+      - const: isi
+      - const: mipi-csi2
+      - const: lcdif2
+      - const: isp
+      - const: dwe
+      - const: mipi-dsi2
+
+  clocks:
+    items:
+      - description: The APB clock
+      - description: The AXI clock
+      - description: The pixel clock for the first CSI2 receiver (aclk)
+      - description: The pixel clock for the second CSI2 receiver (aclk)
+      - description: The pixel clock for the first LCDIF (pix_clk)
+      - description: The pixel clock for the second LCDIF (pix_clk)
+      - description: The core clock for the ISP (clk)
+      - description: The MIPI-PHY reference clock used by DSI
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: cam1
+      - const: cam2
+      - const: disp1
+      - const: disp2
+      - const: isp
+      - const: phy
+
+  interconnects:
+    maxItems: 8
+
+  interconnect-names:
+    items:
+      - const: lcdif-rd
+      - const: lcdif-wr
+      - const: isi0
+      - const: isi1
+      - const: isi2
+      - const: isp0
+      - const: isp1
+      - const: dwe
+
+  bridge@5c:
+    type: object
+    $ref: /schemas/display/bridge/fsl,ldb.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - '#power-domain-cells'
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    blk-ctrl@32ec0000 {
+        compatible = "fsl,imx8mp-media-blk-ctrl", "syscon";
+        reg = <0x32ec0000 0x138>;
+        power-domains = <&mediamix_pd>, <&mipi_phy1_pd>, <&mipi_phy1_pd>,
+                        <&mediamix_pd>, <&mediamix_pd>, <&mipi_phy2_pd>,
+                        <&mediamix_pd>, <&ispdwp_pd>, <&ispdwp_pd>,
+                        <&mipi_phy2_pd>;
+        power-domain-names = "bus", "mipi-dsi1", "mipi-csi1", "lcdif1", "isi",
+                             "mipi-csi2", "lcdif2", "isp", "dwe", "mipi-dsi2";
+        clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>;
+        clock-names = "apb", "axi", "cam1", "cam2", "disp1", "disp2",
+                      "isp", "phy";
+        #power-domain-cells = <1>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        bridge@5c {
+            compatible = "fsl,imx8mp-ldb";
+            reg = <0x5c 0x4>, <0x128 0x4>;
+            reg-names = "ldb", "lvds";
+            clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+            clock-names = "ldb";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    ldb_from_lcdif2: endpoint {
+                        remote-endpoint = <&lcdif2_to_ldb>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    ldb_lvds_ch0: endpoint {
+                        remote-endpoint = <&ldb_to_lvdsx4panel>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    ldb_lvds_ch1: endpoint {
+                    };
+                };
+            };
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml

@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MQ VPU blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MQ VPU blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the VPU peripherals
+  located in the VPU domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mq-vpu-blk-ctrl
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 3
+    maxItems: 3
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: g1
+      - const: g2
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: g1
+      - const: g2
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/power/imx8mq-power.h>
+
+    blk-ctrl@38320000 {
+      compatible = "fsl,imx8mq-vpu-blk-ctrl";
+      reg = <0x38320000 0x100>;
+      power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
+      power-domain-names = "bus", "g1", "g2";
+      clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+               <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+      clock-names = "g1", "g2";
+      #power-domain-cells = <1>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml

@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx93-media-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 Media blk-ctrl
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description:
+  The i.MX93 MEDIAMIX domain contains control and status registers known
+  as MEDIAMIX Block Control (MEDIAMIX BLK_CTRL). These registers include
+  clocking, reset, and miscellaneous top-level controls for peripherals
+  within the MEDIAMIX domain
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx91-media-blk-ctrl
+          - fsl,imx93-media-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 8
+    maxItems: 10
+
+  clock-names:
+    minItems: 8
+    maxItems: 10
+
+  dpi-bridge:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - nxp,imx91-pdfc
+          - nxp,imx93-pdfc
+
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+
+        properties:
+          port@0:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: Input port node to receive pixel data.
+
+          port@1:
+            $ref: /schemas/graph.yaml#/$defs/port-base
+            unevaluatedProperties: false
+            description: Output port node to downstream pixel data receivers.
+
+            properties:
+              endpoint:
+                $ref: /schemas/media/video-interfaces.yaml#
+                unevaluatedProperties: false
+
+                properties:
+                  bus-width:
+                    enum: [ 16, 18, 24 ]
+                    description:
+                      Specify the physical parallel bus width.
+
+                      This property is optional if the display bus-width
+                      matches the SoC bus-width, e.g. a 18-bit RGB666 (display)
+                      is connected and all 18-bit data lines are muxed to the
+                      parallel-output pads.
+
+                      This property must be set to 18 to cut only the LSBs
+                      instead of the MSBs in case a 24-bit RGB888 display is
+                      connected and only the lower 18-bit data lanes are muxed
+                      to the parallel-output pads.
+
+        required:
+          - port@0
+          - port@1
+
+    required:
+      - compatible
+      - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx91-media-blk-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 8
+        clock-names:
+          items:
+            - const: apb
+            - const: axi
+            - const: nic
+            - const: disp
+            - const: cam
+            - const: lcdif
+            - const: isi
+            - const: csi
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx93-media-blk-ctrl
+    then:
+      properties:
+        clocks:
+          minItems: 10
+        clock-names:
+          items:
+            - const: apb
+            - const: axi
+            - const: nic
+            - const: disp
+            - const: cam
+            - const: pxp
+            - const: lcdif
+            - const: isi
+            - const: csi
+            - const: dsi
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx93-clock.h>
+    #include <dt-bindings/power/fsl,imx93-power.h>
+
+    system-controller@4ac10000 {
+      compatible = "fsl,imx93-media-blk-ctrl", "syscon";
+      reg = <0x4ac10000 0x10000>;
+      power-domains = <&mediamix>;
+      clocks = <&clk IMX93_CLK_MEDIA_APB>,
+               <&clk IMX93_CLK_MEDIA_AXI>,
+               <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+               <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+               <&clk IMX93_CLK_CAM_PIX>,
+               <&clk IMX93_CLK_PXP_GATE>,
+               <&clk IMX93_CLK_LCDIF_GATE>,
+               <&clk IMX93_CLK_ISI_GATE>,
+               <&clk IMX93_CLK_MIPI_CSI_GATE>,
+               <&clk IMX93_CLK_MIPI_DSI_GATE>;
+               clock-names = "apb", "axi", "nic", "disp", "cam",
+                             "pxp", "lcdif", "isi", "csi", "dsi";
+      #power-domain-cells = <1>;
+
+      dpi-bridge {
+        compatible = "nxp,imx93-pdfc";
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            pdfc_from_lcdif: endpoint {
+              remote-endpoint = <&lcdif_to_pdfc>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            pdfc_to_panel: endpoint {
+              remote-endpoint = <&panel_from_pdfc>;
+              bus-width = <18>;
+            };
+          };
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml

@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx93-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 System Reset Controller
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  The System Reset Controller (SRC) is responsible for the generation of
+  all the system reset signals and boot argument latching.
+
+  Its main functions are as follows,
+  - Deals with all global system reset sources from other modules,
+    and generates global system reset.
+  - Responsible for power gating of MIXs (Slices) and their memory
+    low power control.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx93-src
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "power-domain@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - const: fsl,imx93-src-slice
+
+      '#power-domain-cells':
+        const: 0
+
+      reg:
+        items:
+          - description: mix slice register region
+          - description: mem slice register region
+
+      clocks:
+        description: |
+          A number of phandles to clocks that need to be enabled
+          during domain power-up sequencing to ensure reset
+          propagation into devices located inside this power domain.
+        minItems: 1
+        maxItems: 5
+
+    required:
+      - compatible
+      - '#power-domain-cells'
+      - reg
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx93-clock.h>
+
+    system-controller@44460000 {
+        compatible = "fsl,imx93-src", "syscon";
+        reg = <0x44460000 0x10000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        mediamix: power-domain@0 {
+            compatible = "fsl,imx93-src-slice";
+            reg = <0x44462400 0x400>, <0x44465800 0x400>;
+            #power-domain-cells = <0>;
+            clocks = <&clk IMX93_CLK_MEDIA_AXI>,
+                     <&clk IMX93_CLK_MEDIA_APB>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml

@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/imx8m-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Series SoC
+
+maintainers:
+  - Alice Guo <alice.guo@nxp.com>
+
+description: |
+  NXP i.MX8M series SoCs contain fuse entries from which SoC Unique ID can be
+  obtained.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,imx8mm
+          - fsl,imx8mn
+          - fsl,imx8mp
+          - fsl,imx8mq
+  required:
+    - compatible
+
+patternProperties:
+  "^soc@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - enum:
+              - fsl,imx8mm-soc
+              - fsl,imx8mn-soc
+              - fsl,imx8mp-soc
+              - fsl,imx8mq-soc
+          - const: simple-bus
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 1
+
+      ranges: true
+
+      dma-ranges: true
+
+      nvmem-cells:
+        maxItems: 1
+        description: Phandle to the SOC Unique ID provided by a nvmem node
+
+      nvmem-cell-names:
+        const: soc_unique_id
+
+    required:
+      - compatible
+      - nvmem-cells
+      - nvmem-cell-names
+
+    additionalProperties:
+      type: object
+
+additionalProperties: true
+
+examples:
+  - |
+    / {
+        model = "FSL i.MX8MM EVK board";
+        compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        soc@0 {
+            compatible = "fsl,imx8mm-soc", "simple-bus";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0x0 0x0 0x0 0x3e000000>;
+            nvmem-cells = <&imx8mm_uid>;
+            nvmem-cell-names = "soc_unique_id";
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022, Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel HPS Copy Engine
+
+maintainers:
+  - Matthew Gerlach <matthew.gerlach@linux.intel.com>
+
+description: |
+  The Intel Hard Processor System (HPS) Copy Engine is an IP block used to copy
+  a bootable image from host memory to HPS DDR.  Additionally, there is a
+  register the HPS can use to indicate the state of booting the copied image as
+  well as a keep-a-live indication to the host.
+
+properties:
+  compatible:
+    const: intel,hps-copy-engine
+
+  '#dma-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus@80000000 {
+        compatible = "simple-bus";
+        reg = <0x80000000 0x60000000>,
+              <0xf9000000 0x00100000>;
+        reg-names = "axi_h2f", "axi_h2f_lw";
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>;
+
+        dma-controller@0 {
+            compatible = "intel,hps-copy-engine";
+            reg = <0x00000000 0x00000000 0x00001000>;
+            #dma-cells = <1>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/intel/intel,lgm-syscon.yaml

@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/intel/intel,lgm-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain(LGM) Syscon
+
+maintainers:
+  - Chuanhua Lei <lchuanhua@maxlinear.com>
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+properties:
+  compatible:
+    items:
+      - const: intel,lgm-syscon
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "^emmc-phy@[0-9a-f]+$":
+    $ref: /schemas/phy/intel,lgm-emmc-phy.yaml#
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    chiptop@e0200000 {
+        compatible = "intel,lgm-syscon", "syscon";
+        reg = <0xe0200000 0x100>;
+        ranges = <0x0 0xe0200000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        emmc-phy@a8 {
+            compatible = "intel,lgm-emmc-phy";
+            reg = <0x00a8 0x10>;
+            clocks = <&emmc>;
+            #phy-cells = <0>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml

@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright 2020 Antmicro <www.antmicro.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/litex/litex,soc-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteX SoC Controller driver
+
+description: |
+  This is the SoC Controller driver for the LiteX SoC Builder.
+  Its purpose is to verify LiteX CSR (Control&Status Register) access
+  operations and provide functions for other drivers to read/write CSRs
+  and to check if those accessors are ready to be used.
+
+maintainers:
+  - Karol Gugala <kgugala@antmicro.com>
+  - Mateusz Holenko <mholenko@antmicro.com>
+
+properties:
+  compatible:
+    const: litex,soc-controller
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc_ctrl0: soc-controller@f0000000 {
+        compatible = "litex,soc-controller";
+        reg = <0xf0000000 0xc>;
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml

@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/loongson/loongson,ls2k-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 Power Manager controller
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: loongson,ls2k0500-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - loongson,ls2k1000-pmc
+              - loongson,ls2k2000-pmc
+          - const: loongson,ls2k0500-pmc
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  loongson,suspend-address:
+    $ref: /schemas/types.yaml#/definitions/uint64
+    description:
+      The "loongson,suspend-address" is a deep sleep state (Suspend To
+      RAM) firmware entry address which was jumped from kernel and it's
+      value was dependent on specific platform firmware code. In
+      addition, the PM need according to it to indicate that current
+      SoC whether support Suspend To RAM.
+
+  syscon-poweroff:
+    $ref: /schemas/power/reset/syscon-poweroff.yaml#
+    type: object
+    description:
+      Node for power off method
+
+  syscon-reboot:
+    $ref: /schemas/power/reset/syscon-reboot.yaml#
+    type: object
+    description:
+      Node for reboot method
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    power-management@1fe27000 {
+        compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon";
+        reg = <0x1fe27000 0x58>;
+        interrupt-parent = <&liointc1>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        loongson,suspend-address = <0x0 0x1c000500>;
+
+        syscon-reboot {
+            compatible = "syscon-reboot";
+            offset = <0x30>;
+            mask = <0x1>;
+        };
+
+        syscon-poweroff {
+            compatible = "syscon-poweroff";
+            regmap = <&pmc>;
+            offset = <0x14>;
+            mask = <0x3c00>;
+            value = <0x3c00>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# # Copyright 2020 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/devapc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Device Access Permission Control driver
+
+description: |
+  MediaTek bus fabric provides TrustZone security support and data
+  protection to prevent slaves from being accessed by unexpected masters.
+  The security violation is logged and sent to the processor for further
+  analysis and countermeasures.
+
+maintainers:
+  - Neal Liu <neal.liu@mediatek.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6779-devapc
+      - mediatek,mt8186-devapc
+
+  reg:
+    description: The base address of devapc register bank
+    maxItems: 1
+
+  interrupts:
+    description: A single interrupt specifier
+    maxItems: 1
+
+  clocks:
+    description: Contains module clock source and clock names
+    maxItems: 1
+
+  clock-names:
+    description: Names of the clocks list in clocks property
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt6779-clk.h>
+
+    devapc: devapc@10207000 {
+      compatible = "mediatek,mt6779-devapc";
+      reg = <0x10207000 0x1000>;
+      interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&infracfg_ao CLK_INFRA_DEVICE_APC>;
+      clock-names = "devapc-infra-clock";
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml

@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,ccorr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek color correction
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek color correction with 3X3 matrix.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-ccorr
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    mdp3_ccorr: mdp3-ccorr@1401c000 {
+      compatible = "mediatek,mt8183-mdp3-ccorr";
+      reg = <0x1401c000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_CCORR_SOF>,
+                            <CMDQ_EVENT_MDP_CCORR_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_CCORR>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mt7986-wo-ccif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Wireless Ethernet Dispatch (WED) WO controller interface for MT7986
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The MediaTek wo-ccif provides a configuration interface for WED WO
+  controller used to perform offload rx packet processing (e.g. 802.11
+  aggregation packet reordering or rx header translation) on MT7986 soc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7986-wo-ccif
+          - mediatek,mt7988-wo-ccif
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      syscon@151a5000 {
+        compatible = "mediatek,mt7986-wo-ccif", "syscon";
+        reg = <0 0x151a5000 0 0x1000>;
+        interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8183-dvfsrc.yaml

@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mt8183-dvfsrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Dynamic Voltage and Frequency Scaling Resource Collector (DVFSRC)
+
+description:
+  The Dynamic Voltage and Frequency Scaling Resource Collector (DVFSRC) is a
+  Hardware module used to collect all the requests from both software and the
+  various remote processors embedded into the SoC and decide about a minimum
+  operating voltage and a minimum DRAM frequency to fulfill those requests in
+  an effort to provide the best achievable performance per watt.
+  This hardware IP is capable of transparently performing direct register R/W
+  on all of the DVFSRC-controlled regulators and SoC bandwidth knobs.
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Henry Chen <henryc.chen@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6893-dvfsrc
+          - mediatek,mt8183-dvfsrc
+          - mediatek,mt8195-dvfsrc
+      - items:
+          - const: mediatek,mt8192-dvfsrc
+          - const: mediatek,mt8195-dvfsrc
+
+  reg:
+    maxItems: 1
+    description: DVFSRC common register address and length.
+
+  clocks:
+    items:
+      - description: Clock that drives the DVFSRC MCU
+
+  regulators:
+    type: object
+    $ref: /schemas/regulator/mediatek,mt6873-dvfsrc-regulator.yaml#
+
+  interconnect:
+    type: object
+    $ref: /schemas/interconnect/mediatek,mt8183-emi.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        system-controller@10012000 {
+            compatible = "mediatek,mt8195-dvfsrc";
+            reg = <0 0x10012000 0 0x1000>;
+            clocks = <&topckgen CLK_TOP_DVFSRC>;
+
+            regulators {
+                compatible = "mediatek,mt8195-dvfsrc-regulator";
+
+                dvfsrc_vcore: dvfsrc-vcore {
+                        regulator-name = "dvfsrc-vcore";
+                        regulator-min-microvolt = <550000>;
+                        regulator-max-microvolt = <750000>;
+                        regulator-always-on;
+                };
+
+                dvfsrc_vscp: dvfsrc-vscp {
+                        regulator-name = "dvfsrc-vscp";
+                        regulator-min-microvolt = <550000>;
+                        regulator-max-microvolt = <750000>;
+                        regulator-always-on;
+                };
+            };
+
+            emi_icc: interconnect {
+                compatible = "mediatek,mt8195-emi";
+                #interconnect-cells = <1>;
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml

@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mutex.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek mutex
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek mutex, namely MUTEX, is used to send the triggers signals called
+  Start Of Frame (SOF) / End Of Frame (EOF) to each sub-modules on the display
+  data path or MDP data path.
+  In some SoC, such as mt2701, MUTEX could be a hardware mutex which protects
+  the shadow register.
+  MUTEX device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-disp-mutex
+      - mediatek,mt2712-disp-mutex
+      - mediatek,mt6795-disp-mutex
+      - mediatek,mt8167-disp-mutex
+      - mediatek,mt8173-disp-mutex
+      - mediatek,mt8183-disp-mutex
+      - mediatek,mt8186-disp-mutex
+      - mediatek,mt8186-mdp3-mutex
+      - mediatek,mt8188-disp-mutex
+      - mediatek,mt8188-vpp-mutex
+      - mediatek,mt8192-disp-mutex
+      - mediatek,mt8195-disp-mutex
+      - mediatek,mt8195-vpp-mutex
+      - mediatek,mt8365-disp-mutex
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: MUTEX Clock
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2701-disp-mutex
+              - mediatek,mt2712-disp-mutex
+              - mediatek,mt6795-disp-mutex
+              - mediatek,mt8173-disp-mutex
+              - mediatek,mt8186-disp-mutex
+              - mediatek,mt8186-mdp3-mutex
+              - mediatek,mt8192-disp-mutex
+              - mediatek,mt8195-disp-mutex
+    then:
+      required:
+        - clocks
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mutex: mutex@14020000 {
+            compatible = "mediatek,mt8173-disp-mutex";
+            reg = <0 0x14020000 0 0x1000>;
+            interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_MUTEX_32K>;
+            mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
+                                  <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml

@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,pwrap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek PMIC Wrapper
+
+maintainers:
+  - Flora Fu <flora.fu@mediatek.com>
+  - Alexandre Mergnat <amergnat@baylibre.com>
+
+description:
+  On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
+  is not directly visible to the CPU, but only through the PMIC wrapper
+  inside the SoC. The communication between the SoC and the PMIC can
+  optionally be encrypted. Also a non standard Dual IO SPI mode can be
+  used to increase speed.
+
+  IP Pairing
+
+  On MT8135 the pins of some SoC internal peripherals can be on the PMIC.
+  The signals of these pins are routed over the SPI bus using the pwrap
+  bridge. In the binding description below the properties needed for bridging
+  are marked with "IP Pairing". These are optional on SoCs which do not support
+  IP Pairing
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-pwrap
+              - mediatek,mt6765-pwrap
+              - mediatek,mt6779-pwrap
+              - mediatek,mt6795-pwrap
+              - mediatek,mt6797-pwrap
+              - mediatek,mt6873-pwrap
+              - mediatek,mt7622-pwrap
+              - mediatek,mt8135-pwrap
+              - mediatek,mt8173-pwrap
+              - mediatek,mt8183-pwrap
+              - mediatek,mt8186-pwrap
+              - mediatek,mt8195-pwrap
+              - mediatek,mt8365-pwrap
+              - mediatek,mt8516-pwrap
+      - items:
+          - enum:
+              - mediatek,mt8186-pwrap
+              - mediatek,mt8195-pwrap
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt8188-pwrap
+              - mediatek,mt8189-pwrap
+          - const: mediatek,mt8195-pwrap
+          - const: syscon
+
+  reg:
+    minItems: 1
+    items:
+      - description: PMIC wrapper registers
+      - description: IP pairing registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: pwrap
+      - const: pwrap-bridge
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: SPI bus clock
+      - description: Main module clock
+      - description: System module clock
+      - description: Timer module clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: spi
+      - const: wrap
+      - const: sys
+      - const: tmr
+
+  resets:
+    minItems: 1
+    items:
+      - description: PMIC wrapper reset
+      - description: IP pairing reset
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: pwrap
+      - const: pwrap-bridge
+
+  power-domains:
+    maxItems: 1
+
+  pmic:
+    type: object
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+dependentRequired:
+  resets: [reset-names]
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8365-pwrap
+    then:
+      properties:
+        clocks:
+          minItems: 4
+
+        clock-names:
+          minItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8173-pwrap
+    then:
+      properties:
+        power-domains: true
+    else:
+      properties:
+        power-domains: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/mt8135-resets.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pwrap@1000f000 {
+            compatible = "mediatek,mt8135-pwrap";
+            reg = <0 0x1000f000 0 0x1000>,
+                  <0 0x11017000 0 0x1000>;
+            reg-names = "pwrap", "pwrap-bridge";
+            interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk26m>, <&clk26m>;
+            clock-names = "spi", "wrap";
+            resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+                     <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+            reset-names = "pwrap", "pwrap-bridge";
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml

@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,wdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Write Direct Memory Access
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek Write Direct Memory Access(WDMA) component used to write
+  the data into DMA.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-wdma
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    mdp3_wdma: mdp3-wdma@14006000 {
+      compatible = "mediatek,mt8183-mdp3-wdma";
+      reg = <0x14006000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_WDMA0_SOF>,
+                            <CMDQ_EVENT_MDP_WDMA0_EOF>;
+      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+      clocks = <&mmsys CLK_MM_MDP_WDMA0>;
+      iommus = <&iommu>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml

@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Smart Voltage Scaling (SVS)
+
+maintainers:
+  - Roger Lu <roger.lu@mediatek.com>
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Kevin Hilman <khilman@kernel.org>
+
+description: |+
+  The SVS engine is a piece of hardware which has several
+  controllers(banks) for calculating suitable voltage to
+  different power domains(CPU/GPU/CCI) according to
+  chip process corner, temperatures and other factors. Then DVFS
+  driver could apply SVS bank voltage to PMIC/Buck.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-svs
+      - mediatek,mt8186-svs
+      - mediatek,mt8188-svs
+      - mediatek,mt8192-svs
+      - mediatek,mt8195-svs
+
+  reg:
+    maxItems: 1
+    description: Address range of the MTK SVS controller.
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Main clock for MTK SVS controller to work.
+
+  clock-names:
+    const: main
+
+  nvmem-cells:
+    minItems: 1
+    description:
+      Phandle to the calibration data provided by a nvmem device.
+    items:
+      - description: SVS efuse for SVS controller
+      - description: Thermal efuse for SVS controller
+
+  nvmem-cell-names:
+    items:
+      - const: svs-calibration-data
+      - const: t-calibration-data
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: svs_rst
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        svs@1100b000 {
+            compatible = "mediatek,mt8183-svs";
+            reg = <0 0x1100b000 0 0x1000>;
+            interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&infracfg CLK_INFRA_THERM>;
+            clock-names = "main";
+            nvmem-cells = <&svs_calibration>, <&thermal_calibration>;
+            nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt

@@ -0,0 +1,79 @@
+MediaTek SCPSYS
+===============
+
+The System Control Processor System (SCPSYS) has several power management
+related tasks in the system. The tasks include thermal measurement, dynamic
+voltage frequency scaling (DVFS), interrupt filter and lowlevel sleep control.
+The System Power Manager (SPM) inside the SCPSYS is for the MTCMOS power
+domain control.
+
+The driver implements the Generic PM domain bindings described in
+power/power-domain.yaml. It provides the power domains defined in
+- include/dt-bindings/power/mt8173-power.h
+- include/dt-bindings/power/mt6797-power.h
+- include/dt-bindings/power/mt6765-power.h
+- include/dt-bindings/power/mt2701-power.h
+- include/dt-bindings/power/mt2712-power.h
+- include/dt-bindings/power/mt7622-power.h
+
+Required properties:
+- compatible: Should be one of:
+	- "mediatek,mt2701-scpsys"
+	- "mediatek,mt2712-scpsys"
+	- "mediatek,mt6735-scpsys"
+	- "mediatek,mt6765-scpsys"
+	- "mediatek,mt6797-scpsys"
+	- "mediatek,mt7622-scpsys"
+	- "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys": For MT7623 SoC
+	- "mediatek,mt7623a-scpsys": For MT7623A SoC
+	- "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys": For MT7629 SoC
+	- "mediatek,mt8173-scpsys"
+- #power-domain-cells: Must be 1
+- reg: Address range of the SCPSYS unit
+- infracfg: must contain a phandle to the infracfg controller
+- clock, clock-names: clocks according to the common clock binding.
+                      These are clocks which hardware needs to be
+                      enabled before enabling certain power domains.
+	Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif"
+	Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec"
+	Required clocks for MT6765: MUX: "mm", "mfg"
+				    CG: "mm-0", "mm-1", "mm-2", "mm-3", "isp-0",
+					"isp-1", "cam-0", "cam-1", "cam-2",
+					"cam-3","cam-4"
+	Required clocks for MT6797: "mm", "mfg", "vdec"
+	Required clocks for MT7622 or MT7629: "hif_sel"
+	Required clocks for MT7623A: "ethif"
+	Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
+
+Optional properties:
+- vdec-supply: Power supply for the vdec power domain
+- venc-supply: Power supply for the venc power domain
+- isp-supply: Power supply for the isp power domain
+- mm-supply: Power supply for the mm power domain
+- venc_lt-supply: Power supply for the venc_lt power domain
+- audio-supply: Power supply for the audio power domain
+- usb-supply: Power supply for the usb power domain
+- mfg_async-supply: Power supply for the mfg_async power domain
+- mfg_2d-supply: Power supply for the mfg_2d power domain
+- mfg-supply: Power supply for the mfg power domain
+
+Example:
+
+	scpsys: scpsys@10006000 {
+		#power-domain-cells = <1>;
+		compatible = "mediatek,mt8173-scpsys";
+		reg = <0 0x10006000 0 0x1000>;
+		infracfg = <&infracfg>;
+		clocks = <&clk26m>,
+			 <&topckgen CLK_TOP_MM_SEL>;
+			 <&topckgen CLK_TOP_VENC_SEL>,
+			 <&topckgen CLK_TOP_VENC_LT_SEL>;
+		clock-names = "mfg", "mm", "venc", "venc_lt";
+	};
+
+Example consumer:
+
+	afe: mt8173-afe-pcm@11220000 {
+		compatible = "mediatek,mt8173-afe-pcm";
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_AUDIO>;
+	};

linux-7.2.3/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml

@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Timer Counter Block
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+  The Atmel (now Microchip) SoCs have timers named Timer Counter Block. Each
+  timer has three channels with two counters each.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91rm9200-tcb
+              - atmel,at91sam9x5-tcb
+              - atmel,sama5d2-tcb
+          - const: simple-mfd
+          - const: syscon
+      - items:
+          - const: microchip,sam9x7-tcb
+          - const: atmel,sama5d2-tcb
+          - const: simple-mfd
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      List of interrupts. One interrupt per TCB channel if available or one
+      interrupt for the TC block
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    description:
+      List of clock names. Always includes t0_clk and slow clk. Also includes
+      t1_clk and t2_clk if a clock per channel is available.
+    minItems: 2
+    maxItems: 4
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^timer@[0-2]$':
+    description: The timer block channels that are used as timers or counters.
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        items:
+          - enum:
+              - atmel,tcb-timer
+              - atmel,tcb-pwm
+              - microchip,tcb-capture
+      reg:
+        description:
+          List of channels to use for this particular timer. In Microchip TCB capture
+          mode channels are registered as a counter devices, for the qdec mode TCB0's
+          channel <0> and <1> are required.
+
+        minItems: 1
+        maxItems: 3
+    required:
+      - compatible
+      - reg
+
+  '^pwm@[0-2]$':
+    description: The timer block channels that are used as PWMs.
+    $ref: /schemas/pwm/pwm.yaml#
+    type: object
+    properties:
+      compatible:
+        const: atmel,tcb-pwm
+      reg:
+        description:
+          TCB channel to use for this PWM.
+        enum: [ 0, 1, 2 ]
+
+      '#pwm-cells':
+        description:
+          The only third cell flag supported by this binding is
+          PWM_POLARITY_INVERTED.
+        const: 3
+
+    required:
+      - compatible
+      - reg
+      - '#pwm-cells'
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,sama5d2-tcb
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: t0_clk
+            - const: gclk
+            - const: slow_clk
+    else:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 4
+        clock-names:
+          oneOf:
+            - items:
+                - const: t0_clk
+                - const: slow_clk
+            - items:
+                - const: t0_clk
+                - const: t1_clk
+                - const: t2_clk
+                - const: slow_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* One interrupt per TC block: */
+        tcb0: timer@fff7c000 {
+                compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0xfff7c000 0x100>;
+                interrupts = <18 4>;
+                clocks = <&tcb0_clk>, <&clk32k>;
+                clock-names = "t0_clk", "slow_clk";
+
+                timer@0 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <0>, <1>;
+                };
+
+                timer@2 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <2>;
+                };
+        };
+
+    /* One interrupt per TC channel in a TC block: */
+        tcb1: timer@fffdc000 {
+                compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0xfffdc000 0x100>;
+                interrupts = <26 4>, <27 4>, <28 4>;
+                clocks = <&tcb1_clk>, <&clk32k>;
+                clock-names = "t0_clk", "slow_clk";
+
+                timer@0 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <0>;
+                };
+
+                timer@1 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <1>;
+                };
+
+                pwm@2 {
+                        compatible = "atmel,tcb-pwm";
+                        reg = <2>;
+                        #pwm-cells = <3>;
+                };
+         };
+    /* TCB0 Capture with QDEC: */
+        timer@f800c000 {
+                compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0xfff7c000 0x100>;
+                interrupts = <18 4>;
+                clocks = <&tcb0_clk>, <&clk32k>;
+                clock-names = "t0_clk", "slow_clk";
+
+                timer@0 {
+                        compatible = "microchip,tcb-capture";
+                        reg = <0>, <1>;
+                };
+
+                timer@2 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <2>;
+                };
+        };

linux-7.2.3/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-irqmux.yaml

@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/microchip/microchip,mpfs-irqmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Polarfire SoC GPIO Interrupt Mux
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  There are 3 GPIO controllers on this SoC, of which:
+  - GPIO controller 0 has 14 GPIOs
+  - GPIO controller 1 has 24 GPIOs
+  - GPIO controller 2 has 32 GPIOs
+
+  All GPIOs are capable of generating interrupts, for a total of 70.
+  There are only 41 IRQs available however, so a configurable mux is used to
+  ensure all GPIOs can be used for interrupt generation.
+  38 of the 41 interrupts are in what the documentation calls "direct mode",
+  as they provide an exclusive connection from a GPIO to the PLIC.
+  Lines 18 to 23 on GPIO controller 1 are always in "direct mode".
+  The 3 remaining interrupts are used to mux the interrupts which do not have
+  a exclusive connection, one for each GPIO controller.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,pic64gx-irqmux
+          - const: microchip,mpfs-irqmux
+      - const: microchip,mpfs-irqmux
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 0
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-map-mask:
+    items:
+      - const: 0x7f
+
+  interrupt-map:
+    description: |
+      Specifies the mapping from GPIO interrupt lines to plic interrupts.
+
+      The child interrupt number set in arrays items is computed using the
+      following formula:
+          gpio_bank * 32 + gpio_number
+      with:
+        - gpio_bank: The GPIO bank number
+            - 0 for GPIO0,
+            - 1 for GPIO1,
+            - 2 for GPIO2
+        - gpio_number: Number of the gpio in the bank (0..31)
+    maxItems: 70
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@54 {
+        compatible = "microchip,mpfs-irqmux";
+        reg = <0x54 0x4>;
+        #address-cells = <0>;
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0x7f>;
+        interrupt-map = <0 &plic 13>, <1 &plic 14>, <2 &plic 15>,
+                        <3 &plic 16>, <4 &plic 17>, <5 &plic 18>,
+                        <6 &plic 19>, <7 &plic 20>, <8 &plic 21>,
+                        <9 &plic 22>, <10 &plic 23>, <11 &plic 24>,
+                        <12 &plic 25>, <13 &plic 26>,
+
+                        <32 &plic 27>, <33 &plic 28>, <34 &plic 29>,
+                        <35 &plic 30>, <36 &plic 31>, <37 &plic 32>,
+                        <38 &plic 33>, <39 &plic 34>, <40 &plic 35>,
+                        <41 &plic 36>, <42 &plic 37>, <43 &plic 38>,
+                        <44 &plic 39>, <45 &plic 40>, <46 &plic 41>,
+                        <47 &plic 42>, <48 &plic 43>, <49 &plic 44>,
+                        <50 &plic 45>, <51 &plic 46>, <52 &plic 47>,
+                        <53 &plic 48>, <54 &plic 49>, <55 &plic 50>,
+
+                        <64 &plic 53>, <65 &plic 53>, <66 &plic 53>,
+                        <67 &plic 53>, <68 &plic 53>, <69 &plic 53>,
+                        <70 &plic 53>, <71 &plic 53>, <72 &plic 53>,
+                        <73 &plic 53>, <74 &plic 53>, <75 &plic 53>,
+                        <76 &plic 53>, <77 &plic 53>, <78 &plic 53>,
+                        <79 &plic 53>, <80 &plic 53>, <81 &plic 53>,
+                        <82 &plic 53>, <83 &plic 53>, <84 &plic 53>,
+                        <85 &plic 53>, <86 &plic 53>, <87 &plic 53>,
+                        <88 &plic 53>, <89 &plic 53>, <90 &plic 53>,
+                        <91 &plic 53>, <92 &plic 53>, <93 &plic 53>,
+                        <94 &plic 53>, <95 &plic 53>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-mss-top-sysreg.yaml

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/microchip/microchip,mpfs-mss-top-sysreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC Microprocessor Subsystem (MSS) sysreg register region
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description:
+  An wide assortment of registers that control elements of the MSS on PolarFire
+  SoC, including pinmuxing, resets and clocks among others.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,mpfs-mss-top-sysreg
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - const: microchip,pic64gx-mss-top-sysreg
+          - const: microchip,mpfs-mss-top-sysreg
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#reset-cells':
+    description:
+      The AHB/AXI peripherals on the PolarFire SoC have reset support, so
+      from CLK_ENVM to CLK_CFM. The reset consumer should specify the
+      desired peripheral via the clock ID in its "resets" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list
+      of PolarFire clock/reset IDs.
+    const: 1
+
+  interrupt-controller@54:
+    type: object
+    $ref: /schemas/soc/microchip/microchip,mpfs-irqmux.yaml
+
+  pinctrl@200:
+    type: object
+    $ref: /schemas/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml
+
+  pinctrl@204:
+    type: object
+    $ref: /schemas/pinctrl/microchip,mpfs-pinctrl-mssio.yaml
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@20002000 {
+      compatible = "microchip,mpfs-mss-top-sysreg", "syscon", "simple-mfd";
+      reg = <0x20002000 0x1000>;
+      #reset-cells = <1>;
+    };
+

linux-7.2.3/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  PolarFire SoC devices include a microcontroller acting as the system controller,
+  which provides "services" to the main processor and to the FPGA fabric. These
+  services include hardware rng, reprogramming of the FPGA and verification of the
+  eNVM contents etc. More information on these services can be found online, at
+  https://onlinedocs.microchip.com/pr/GUID-1409CF11-8EF9-4C24-A94E-70979A688632-en-US-1/index.html
+
+  Communication with the system controller is done via a mailbox, of which the client
+  portion is documented here.
+
+properties:
+  mboxes:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - microchip,mpfs-sys-controller
+      - microchip,pic64gx-sys-controller
+
+  microchip,bitstream-flash:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The SPI flash connected to the system controller's QSPI controller.
+      The system controller may retrieve FPGA bitstreams from this flash to
+      perform In-Application Programming (IAP) or during device initialisation
+      for Auto Update. The MSS and system controller have separate QSPI
+      controllers and this flash is connected to both. Software running in the
+      MSS can write bitstreams to the flash.
+
+required:
+  - compatible
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    syscontroller {
+      compatible = "microchip,mpfs-sys-controller";
+      mboxes = <&mbox 0>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/microchip/microchip,sparx5-cpu-syscon.yaml

@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/microchip/microchip,sparx5-cpu-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 CPU Syscon
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+properties:
+  compatible:
+    items:
+      - const: microchip,sparx5-cpu-syscon
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  mux-controller:
+    $ref: /schemas/mux/reg-mux.yaml#
+
+required:
+  - compatible
+  - reg
+  - mux-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        syscon@600000000 {
+            compatible = "microchip,sparx5-cpu-syscon", "syscon",
+                         "simple-mfd";
+            reg = <0x6 0x00000000 0xd0>;
+
+            mux: mux-controller {
+                compatible = "mmio-mux";
+                #mux-control-cells = <1>;
+                mux-reg-masks = <0x88 0xf0>;
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mobileye/mobileye,eyeq5-olb.yaml

@@ -0,0 +1,357 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mobileye/mobileye,eyeq5-olb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ SoC system controller
+
+maintainers:
+  - Grégory Clement <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+
+description:
+  OLB ("Other Logic Block") is a hardware block grouping smaller blocks. Clocks,
+  resets, pinctrl are being handled from here. EyeQ5 and EyeQ6L host a single
+  instance. EyeQ6H hosts seven instances.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mobileye,eyeq5-olb
+          - mobileye,eyeq6l-olb
+          - mobileye,eyeq6h-acc-olb
+          - mobileye,eyeq6h-central-olb
+          - mobileye,eyeq6h-east-olb
+          - mobileye,eyeq6h-west-olb
+          - mobileye,eyeq6h-south-olb
+          - mobileye,eyeq6h-ddr0-olb
+          - mobileye,eyeq6h-ddr1-olb
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    description:
+      First cell is domain and optional if compatible has a single reset domain.
+      Second cell is reset index inside that domain.
+    enum: [ 1, 2 ]
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Input parent clock to all PLLs. Expected to be the main crystal.
+
+  clock-names:
+    const: ref
+
+  '#phy-cells':
+    const: 1
+
+patternProperties:
+  '-pins?$':
+    type: object
+    description: Pin muxing configuration.
+    $ref: /schemas/pinctrl/pinmux-node.yaml#
+    additionalProperties: false
+    properties:
+      pins: true
+      function:
+        enum: [gpio,
+               # Bank A
+               timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0,
+               spi1, refclk0,
+               # Bank B
+               timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0]
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+    required:
+      - pins
+      - function
+    allOf:
+      - if:
+          properties:
+            function:
+              const: gpio
+        then:
+          properties:
+            pins:
+              items: # PA0 - PA28, PB0 - PB22
+                pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$'
+      - if:
+          properties:
+            function:
+              const: timer0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA0, PA1]
+      - if:
+          properties:
+            function:
+              const: timer1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA2, PA3]
+      - if:
+          properties:
+            function:
+              const: timer2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA4, PA5]
+      - if:
+          properties:
+            function:
+              const: timer5
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA6, PA7, PA8, PA9]
+      - if:
+          properties:
+            function:
+              const: uart0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA10, PA11]
+      - if:
+          properties:
+            function:
+              const: uart1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA12, PA13]
+      - if:
+          properties:
+            function:
+              const: can0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA14, PA15]
+      - if:
+          properties:
+            function:
+              const: can1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA16, PA17]
+      - if:
+          properties:
+            function:
+              const: spi0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA18, PA19, PA20, PA21, PA22]
+      - if:
+          properties:
+            function:
+              const: spi1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA23, PA24, PA25, PA26, PA27]
+      - if:
+          properties:
+            function:
+              const: refclk0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA28]
+      - if:
+          properties:
+            function:
+              const: timer3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB0, PB1]
+      - if:
+          properties:
+            function:
+              const: timer4
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB2, PB3]
+      - if:
+          properties:
+            function:
+              const: timer6
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB4, PB5, PB6, PB7]
+      - if:
+          properties:
+            function:
+              const: uart2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB8, PB9]
+      - if:
+          properties:
+            function:
+              const: can2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB10, PB11]
+      - if:
+          properties:
+            function:
+              const: spi2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB12, PB13, PB14, PB15, PB16]
+      - if:
+          properties:
+            function:
+              const: spi3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB17, PB18, PB19, PB20, PB21]
+      - if:
+          properties:
+            function:
+              const: mclk0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB22]
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+allOf:
+    # Compatibles exposing a single reset domain.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mobileye,eyeq6h-acc-olb
+              - mobileye,eyeq6h-east-olb
+              - mobileye,eyeq6h-west-olb
+    then:
+      properties:
+        '#reset-cells':
+          const: 1
+      required:
+        - '#reset-cells'
+
+    # Compatibles exposing two reset domains.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mobileye,eyeq5-olb
+              - mobileye,eyeq6l-olb
+    then:
+      properties:
+        '#reset-cells':
+          const: 2
+      required:
+        - '#reset-cells'
+
+    # Compatibles not exposing resets.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mobileye,eyeq6h-central-olb
+              - mobileye,eyeq6h-south-olb
+              - mobileye,eyeq6h-ddr0-olb
+              - mobileye,eyeq6h-ddr1-olb
+    then:
+      properties:
+        '#reset-cells': false
+
+    # Only EyeQ5 has pinctrl and PHY in OLB.
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: mobileye,eyeq5-olb
+    then:
+      patternProperties:
+        '-pins?$': false
+      properties:
+        '#phy-cells': false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      system-controller@e00000 {
+        compatible = "mobileye,eyeq5-olb", "syscon";
+        reg = <0 0xe00000 0x0 0x400>;
+        #reset-cells = <2>;
+        #clock-cells = <1>;
+        clocks = <&xtal>;
+        clock-names = "ref";
+      };
+    };
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      system-controller@d2003000 {
+        compatible = "mobileye,eyeq6h-acc-olb", "syscon";
+        reg = <0x0 0xd2003000 0x0 0x1000>;
+        #reset-cells = <1>;
+        #clock-cells = <1>;
+        clocks = <&xtal>;
+        clock-names = "ref";
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mobileye/mobileye,eyeq6lplus-olb.yaml

@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mobileye/mobileye,eyeq6lplus-olb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ6Lplus SoC system controller
+
+maintainers:
+  - Benoît Monin <benoit.monin@bootlin.com>
+  - Grégory Clement <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+
+description:
+  OLB ("Other Logic Block") is a hardware block grouping smaller blocks.
+  Clocks, resets, pinctrl are being handled from here. EyeQ6Lplus hosts
+  a single instance providing 22 clocks, two reset domains and one bank
+  of 32 pins.
+
+properties:
+  compatible:
+    items:
+      - const: mobileye,eyeq6lplus-olb
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    description:
+      First cell is reset domain index.
+      Second cell is reset index inside that domain.
+    const: 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Input parent clock to all PLLs. Expected to be the main crystal.
+
+  clock-names:
+    const: ref
+
+patternProperties:
+  '-pins?$':
+    type: object
+    description: Pin muxing configuration.
+    $ref: /schemas/pinctrl/pinmux-node.yaml#
+    additionalProperties: false
+    properties:
+      pins: true
+      function:
+        enum: [gpio, timer0, timer1, uart_ssi, spi0, uart0, timer2, timer3,
+               timer_ext0, spi1, timer_ext1, ext_ref_clk, mipi_ref_clk]
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+    required:
+      - pins
+      - function
+    allOf:
+      - if:
+          properties:
+            function:
+              const: gpio
+        then:
+          properties:
+            pins:
+              items: # PA0 - PA31
+                pattern: '^(PA[1,2]?[0-9]|PA3[0,1])$'
+      - if:
+          properties:
+            function:
+              const: timer0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA0, PA1]
+      - if:
+          properties:
+            function:
+              const: timer1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA2, PA3]
+      - if:
+          properties:
+            function:
+              const: uart_ssi
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA4, PA5]
+      - if:
+          properties:
+            function:
+              const: spi0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA6, PA7, PA8, PA9, PA10]
+      - if:
+          properties:
+            function:
+              const: uart0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA11, PA12]
+      - if:
+          properties:
+            function:
+              const: timer2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA13, PA14]
+      - if:
+          properties:
+            function:
+              const: timer3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA15, PA16]
+      - if:
+          properties:
+            function:
+              const: timer_ext0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA17, PA18, PA19, PA20]
+      - if:
+          properties:
+            function:
+              const: spi1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA21, PA22, PA23, PA24, PA25]
+      - if:
+          properties:
+            function:
+              const: timer_ext1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA26, PA27, PA28, PA29]
+      - if:
+          properties:
+            function:
+              const: ext_ref_clk
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA30]
+      - if:
+          properties:
+            function:
+              const: mipi_ref_clk
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA31]
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      system-controller@e8400000 {
+        compatible = "mobileye,eyeq6lplus-olb", "syscon";
+        reg = <0 0xe8400000 0x0 0x80000>;
+        #reset-cells = <2>;
+        #clock-cells = <1>;
+        clocks = <&xtal>;
+        clock-names = "ref";
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,gfxi.yaml

@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/nuvoton/nuvoton,gfxi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Graphics Core Information block in Nuvoton SoCs
+
+maintainers:
+  - Joseph Liu <kwliu@nuvoton.com>
+  - Marvin Lin <kflin@nuvoton.com>
+
+description:
+  The Graphics Core Information (GFXI) are a block of registers in Nuvoton SoCs
+  that analyzes Graphics core behavior and provides information in registers.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nuvoton,npcm750-gfxi
+          - nuvoton,npcm845-gfxi
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    gfxi: gfxi@e000 {
+      compatible = "nuvoton,npcm750-gfxi", "syscon";
+      reg = <0xe000 0x100>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml

@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/nuvoton/nuvoton,npcm-gcr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Global Control Registers block in Nuvoton SoCs
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description:
+  The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs
+  that expose misc functionality such as chip model and version information or
+  pinmux settings.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nuvoton,wpcm450-gcr
+          - nuvoton,npcm750-gcr
+          - nuvoton,npcm845-gcr
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    gcr: syscon@800000 {
+      compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd";
+      reg = <0x800000 0x1000>;
+
+      mux-controller {
+        compatible = "mmio-mux";
+        #mux-control-cells = <1>;
+        mux-reg-masks = <0x38 0x07>;
+        idle-states = <2>;
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml

@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,aoss-qmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Always-On Subsystem side channel
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This binding describes the hardware component responsible for side channel
+  requests to the always-on subsystem (AOSS), used for certain power management
+  requests that is not handled by the standard RPMh interface. Each client in the
+  SoC has its own block of message RAM and IRQ for communication with the AOSS.
+  The protocol used to communicate in the message RAM is known as Qualcomm
+  Messaging Protocol (QMP)
+
+  The AOSS side channel exposes control over a set of resources, used to control
+  a set of debug related clocks and to affect the low power state of resources
+  related to the secondary subsystems.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,eliza-aoss-qmp
+          - qcom,glymur-aoss-qmp
+          - qcom,hawi-aoss-qmp
+          - qcom,kaanapali-aoss-qmp
+          - qcom,milos-aoss-qmp
+          - qcom,qcs615-aoss-qmp
+          - qcom,qcs8300-aoss-qmp
+          - qcom,qdu1000-aoss-qmp
+          - qcom,sa8255p-aoss-qmp
+          - qcom,sa8775p-aoss-qmp
+          - qcom,sar2130p-aoss-qmp
+          - qcom,sc7180-aoss-qmp
+          - qcom,sc7280-aoss-qmp
+          - qcom,sc8180x-aoss-qmp
+          - qcom,sc8280xp-aoss-qmp
+          - qcom,sdx75-aoss-qmp
+          - qcom,sdm845-aoss-qmp
+          - qcom,sm6350-aoss-qmp
+          - qcom,sm7150-aoss-qmp
+          - qcom,sm8150-aoss-qmp
+          - qcom,sm8250-aoss-qmp
+          - qcom,sm8350-aoss-qmp
+          - qcom,sm8450-aoss-qmp
+          - qcom,sm8550-aoss-qmp
+          - qcom,sm8650-aoss-qmp
+          - qcom,sm8750-aoss-qmp
+          - qcom,x1e80100-aoss-qmp
+      - const: qcom,aoss-qmp
+
+  reg:
+    maxItems: 1
+    description:
+      The base address and size of the message RAM for this client's
+      communication with the AOSS
+
+  interrupts:
+    maxItems: 1
+    description:
+      Should specify the AOSS message IRQ for this client
+
+  mboxes:
+    maxItems: 1
+    description:
+      Reference to the mailbox representing the outgoing doorbell in APCS for
+      this client, as described in mailbox/mailbox.txt
+
+  "#clock-cells":
+    const: 0
+    description:
+      The single clock represents the QDSS clock.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - mboxes
+  - "#clock-cells"
+
+additionalProperties: false
+
+patternProperties:
+  "^(cx|mx|ebi)$":
+    type: object
+    description:
+      The AOSS side channel also provides the controls for three cooling devices,
+      these are expressed as subnodes of the QMP node. The name of the node is
+      used to identify the resource and must therefore be "cx", "mx" or "ebi".
+
+    properties:
+      "#cooling-cells":
+        const: 2
+
+    required:
+      - "#cooling-cells"
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    aoss_qmp: qmp@c300000 {
+      compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
+      reg = <0x0c300000 0x100000>;
+      interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+      mboxes = <&apss_shared 0>;
+
+      #clock-cells = <0>;
+
+      cx_cdev: cx {
+        #cooling-cells = <2>;
+      };
+
+      mx_cdev: mx {
+        #cooling-cells = <2>;
+      };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml

@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,apr-services.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APR/GPR services shared parts
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Common parts of a static service in Qualcomm APR/GPR (Asynchronous/Generic
+  Packet Router).
+
+properties:
+  reg:
+    minimum: 1
+    maximum: 13
+    description: |
+      APR Service ID
+        3 = DSP Core Service
+        4 = Audio  Front End Service.
+        5 = Voice Stream Manager Service.
+        6 = Voice processing manager.
+        7 = Audio Stream Manager Service.
+        8 = Audio Device Manager Service.
+        9 = Multimode voice manager.
+        10 = Core voice stream.
+        11 = Core voice processor.
+        12 = Ultrasound stream manager.
+        13 = Listen stream manager.
+      GPR Service ID
+        1 = Audio Process Manager Service
+        2 = Proxy Resource Manager Service.
+        3 = AMDB Service.
+        4 = Voice processing manager.
+
+  qcom,protection-domain:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: |
+      Protection domain service name and path for APR service (if supported).
+      Possible values are::
+      "avs/audio", "msm/adsp/audio_pd".
+      "kernel/elf_loader", "msm/modem/wlan_pd".
+      "tms/servreg", "msm/adsp/audio_pd".
+      "tms/servreg", "msm/modem/wlan_pd".
+      "tms/servreg", "msm/slpi/sensor_pd".
+
+required:
+  - reg
+
+additionalProperties: true

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml

@@ -0,0 +1,211 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,apr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APR/GPR (Asynchronous/Generic Packet Router)
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Qualcomm APR/GPR, APR/GPR is a IPC protocol for
+  communication between Application processor and QDSP. APR/GPR is mainly
+  used for audio/voice services on the QDSP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,apr
+      - qcom,apr-v2
+      - qcom,gpr
+
+  power-domains:
+    maxItems: 1
+
+  qcom,apr-domain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4, 5, 6, 7]
+    description:
+      Selects the processor domain for apr
+        1 = APR simulator
+        2 = PC Domain
+        3 = Modem Domain
+        4 = ADSP Domain
+        5 = Application processor Domain
+        6 = Modem2 Domain
+        7 = Application Processor2 Domain
+    deprecated: true
+
+  qcom,domain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 7
+    description:
+      Selects the processor domain for apr
+        1 = APR simulator
+        2 = PC Domain
+        3 = Modem Domain
+        4 = ADSP Domain
+        5 = Application processor Domain
+        6 = Modem2 Domain
+        7 = Application Processor2 Domain
+      Selects the processor domain for gpr
+        1 = Modem Domain
+        2 = Audio DSP Domain
+        3 = Application Processor Domain
+
+  qcom,glink-channels:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Channel name used for the communication
+    maxItems: 1
+
+  qcom,intents:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 32
+    items:
+      items:
+        - description: size of each intent to preallocate
+        - description: amount of intents to preallocate
+          minimum: 1
+    description:
+      List of (size, amount) pairs describing what intents should be
+      preallocated for this virtual channel. This can be used to tweak the
+      default intents available for the channel to meet expectations of the
+      remote.
+
+  qcom,smd-channels:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Channel name used for the communication
+    items:
+      - const: apr_audio_svc
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^service@[1-9a-d]$":
+    type: object
+    $ref: /schemas/soc/qcom/qcom,apr-services.yaml
+    additionalProperties: true
+    description:
+      APR/GPR static port services.
+
+    properties:
+      compatible:
+        enum:
+          - qcom,q6core
+          - qcom,q6asm
+          - qcom,q6afe
+          - qcom,q6adm
+          - qcom,q6apm
+          - qcom,q6prm
+
+required:
+  - compatible
+  - qcom,domain
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,gpr
+    then:
+      properties:
+        qcom,glink-channels:
+          items:
+            - const: adsp_apps
+        power-domains: false
+    else:
+      properties:
+        qcom,glink-channels:
+          items:
+            - const: apr_audio_svc
+
+  - if:
+      required:
+        - qcom,glink-channels
+    then:
+      properties:
+        qcom,smd-channels: false
+
+  - if:
+      required:
+        - qcom,smd-channels
+    then:
+      properties:
+        qcom,glink-channels: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+    apr {
+        compatible = "qcom,apr-v2";
+        qcom,domain = <APR_DOMAIN_ADSP>;
+        qcom,glink-channels = "apr_audio_svc";
+        qcom,intents = <512 20>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        q6core: service@3 {
+            compatible = "qcom,q6core";
+            reg = <APR_SVC_ADSP_CORE>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+
+        service@4 {
+            compatible = "qcom,q6afe";
+            reg = <APR_SVC_AFE>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            clock-controller {
+                compatible = "qcom,q6afe-clocks";
+                #clock-cells = <2>;
+            };
+
+            dais {
+                compatible = "qcom,q6afe-dais";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #sound-dai-cells = <1>;
+                /* ... */
+            };
+            /* ... */
+        };
+    };
+
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+    gpr {
+        compatible = "qcom,gpr";
+        qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+        qcom,glink-channels = "adsp_apps";
+        qcom,intents = <512 20>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@1 {
+            compatible = "qcom,q6apm";
+            reg = <GPR_APM_MODULE_IID>;
+            #sound-dai-cells = <0>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            dais {
+                compatible = "qcom,q6apm-dais";
+                iommus = <&apps_smmu 0x1801 0x0>;
+            };
+
+            bedais {
+                compatible = "qcom,q6apm-lpass-dais";
+                #sound-dai-cells = <1>;
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml

@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,dcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Data Capture and Compare
+
+maintainers:
+  - Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+
+description: |
+    DCC (Data Capture and Compare) is a DMA engine which is used to save
+    configuration data or system memory contents during catastrophic failure
+    or SW trigger. DCC is used to capture and store data for debugging purpose
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sm7150-dcc
+          - qcom,sm8150-dcc
+          - qcom,sc7280-dcc
+          - qcom,sc7180-dcc
+          - qcom,sdm845-dcc
+      - const: qcom,dcc
+
+  reg:
+    items:
+      - description: DCC base
+      - description: DCC RAM base
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dma@10a2000{
+        compatible = "qcom,sm8150-dcc", "qcom,dcc";
+        reg = <0x010a2000 0x1000>,
+              <0x010ad000 0x2000>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml

@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,eud.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Embedded USB Debugger
+
+maintainers:
+  - Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+
+description:
+  This binding is used to describe the Qualcomm Embedded USB Debugger, which is
+  mini USB-hub implemented on chip to support USB-based debug capabilities.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sc7280-eud
+      - const: qcom,eud
+
+  reg:
+    items:
+      - description: EUD Base Register Region
+      - description: EUD Mode Manager Register
+
+  interrupts:
+    description: EUD interrupt
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      These ports is to be attached to the endpoint of the DWC3 controller node
+      and type C connector node. The controller has the "usb-role-switch"
+      property.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: This port is to be attached to the DWC3 controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: This port is to be attached to the type C connector.
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    eud@88e0000 {
+        compatible = "qcom,sc7280-eud", "qcom,eud";
+        reg = <0x88e0000 0x2000>,
+              <0x88e2000 0x1000>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                eud_ep: endpoint {
+                    remote-endpoint = <&usb2_role_switch>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                eud_con: endpoint {
+                    remote-endpoint = <&con_eud>;
+                };
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml

@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GENI Serial Engine QUP Wrapper Controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
+ is a programmable module for supporting a wide range of serial interfaces
+ like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
+ Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
+ Wrapper controller is modeled as a node with zero or more child nodes each
+ representing a serial engine.
+
+properties:
+  compatible:
+    enum:
+      - qcom,geni-se-qup
+      - qcom,geni-se-i2c-master-hub
+
+  reg:
+    description: QUP wrapper common register address and length.
+    maxItems: 1
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    const: qup-core
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  firmware-name:
+    maxItems: 1
+    description: Specify the name of the QUP firmware to load.
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+patternProperties:
+  "spi@[0-9a-f]+$":
+    type: object
+    description: GENI serial engine based SPI controller. SPI in master mode
+                 supports up to 50MHz, up to four chip selects, programmable
+                 data path from 4 bits to 32 bits and numerous protocol
+                 variants.
+    $ref: /schemas/spi/qcom,spi-geni-qcom.yaml#
+
+  "i2c@[0-9a-f]+$":
+    type: object
+    description: GENI serial engine based I2C controller.
+    $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml#
+
+  "serial@[0-9a-f]+$":
+    type: object
+    description: GENI Serial Engine based UART Controller.
+    $ref: /schemas/serial/qcom,serial-geni-qcom.yaml#
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,geni-se-i2c-master-hub
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: s-ahb
+
+        clocks:
+          items:
+            - description: Slave AHB Clock
+
+        iommus: false
+
+      patternProperties:
+        "spi@[0-9a-f]+$": false
+        "serial@[0-9a-f]+$": false
+    else:
+      properties:
+        clock-names:
+          items:
+            - const: m-ahb
+            - const: s-ahb
+
+        clocks:
+          items:
+            - description: Master AHB Clock
+            - description: Slave AHB Clock
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        geniqup@8c0000 {
+            compatible = "qcom,geni-se-qup";
+            reg = <0 0x008c0000 0 0x6000>;
+            clock-names = "m-ahb", "s-ahb";
+            clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+                <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+            firmware-name = "qcom/sa8775p/qupv3fw.elf";
+
+            i2c0: i2c@a94000 {
+                compatible = "qcom,geni-i2c";
+                reg = <0 0xa94000 0 0x4000>;
+                interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+                clock-names = "se";
+                clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+                pinctrl-names = "default", "sleep";
+                pinctrl-0 = <&qup_1_i2c_5_active>;
+                pinctrl-1 = <&qup_1_i2c_5_sleep>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+
+            uart0: serial@a88000 {
+                compatible = "qcom,geni-uart";
+                reg = <0 0xa88000 0 0x7000>;
+                interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+                clock-names = "se";
+                clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+                pinctrl-names = "default", "sleep";
+                pinctrl-0 = <&qup_1_uart_3_active>;
+                pinctrl-1 = <&qup_1_uart_3_sleep>;
+            };
+        };
+    };
+
+...

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml

@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm General Serial Bus Interface (GSBI)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  The GSBI controller is modeled as a node with zero or more child nodes, each
+  representing a serial sub-node device that is mux'd as part of the GSBI
+  configuration settings.  The mode setting will govern the input/output mode
+  of the 4 GSBI IOs.
+
+  A GSBI controller node can contain 0 or more child nodes representing serial
+  devices.  These serial devices can be a QCOM UART, I2C controller, spi
+  controller, or some combination of aforementioned devices.
+
+properties:
+  compatible:
+    const: qcom,gsbi-v1.0.0
+
+  '#address-cells':
+    const: 1
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The GSBI index.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: iface
+
+  qcom,crci:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      CRCI MUX value for QUP CRCI ports.  Please reference
+      include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
+
+  qcom,mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      MUX value for configuration of the serial interface.  Please reference
+      include/dt-bindings/soc/qcom,gsbi.h for valid mux values.
+
+  '#size-cells':
+    const: 1
+
+  syscon-tcsr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of TCSR syscon node.Required if child uses dma.
+
+  ranges: true
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "spi@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/spi/qcom,spi-qup.yaml#
+
+  "i2c@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/i2c/qcom,i2c-qup.yaml#
+
+  "serial@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/serial/qcom,msm-uartdm.yaml#
+
+required:
+  - compatible
+  - cell-index
+  - clocks
+  - clock-names
+  - qcom,mode
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,gsbi.h>
+
+    gsbi@12440000 {
+        compatible = "qcom,gsbi-v1.0.0";
+        reg = <0x12440000 0x100>;
+        cell-index = <1>;
+        clocks = <&gcc GSBI1_H_CLK>;
+        clock-names = "iface";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        syscon-tcsr = <&tcsr>;
+        qcom,mode = <GSBI_PROT_I2C_UART>;
+
+        serial@12450000 {
+            compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+            reg = <0x12450000 0x100>,
+                  <0x12400000 0x03>;
+            interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+            clock-names = "core", "iface";
+        };
+
+        i2c@12460000 {
+            compatible = "qcom,i2c-qup-v1.1.1";
+            reg = <0x12460000 0x1000>;
+            pinctrl-0 = <&i2c1_pins>;
+            pinctrl-1 = <&i2c1_pins_sleep>;
+            pinctrl-names = "default", "sleep";
+            interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+            clock-names = "core", "iface";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            status = "disabled"; /* UART chosen */
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml

@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,msm8976-ramp-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Ramp Controller
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+  The Ramp Controller is used to program the sequence ID for pulse
+  swallowing, enable sequences and link Sequence IDs (SIDs) for the
+  CPU cores on some Qualcomm SoCs.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8976-ramp-controller
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cpu-power-controller@b014000 {
+        compatible = "qcom,msm8976-ramp-controller";
+        reg = <0x0b014000 0x68>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,pbs.yaml

@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,pbs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Programmable Boot Sequencer
+
+maintainers:
+  - Anjelique Melendez <quic_amelende@quicinc.com>
+
+description: |
+  The Qualcomm Technologies, Inc. Programmable Boot Sequencer (PBS)
+  supports triggering power up and power down sequences for clients
+  upon request.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pmi632-pbs
+      - const: qcom,pbs
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@0 {
+      reg = <0x0 SPMI_USID>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pbs@7400 {
+        compatible = "qcom,pmi632-pbs", "qcom,pbs";
+        reg = <0x7400>;
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml

@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,pmic-glink.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMIC GLINK firmware interface for battery management, USB
+  Type-C and other things.
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  The PMIC GLINK service, running on a coprocessor on some modern Qualcomm
+  platforms and implement USB Type-C handling and battery management. This
+  binding describes the component in the OS used to communicate with the
+  firmware and connect it's resources to those described in the Devicetree,
+  particularly the USB Type-C controllers relationship with USB and DisplayPort
+  components.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,glymur-pmic-glink
+              - qcom,kaanapali-pmic-glink
+              - qcom,qcm6490-pmic-glink
+              - qcom,sc8180x-pmic-glink
+              - qcom,sc8280xp-pmic-glink
+              - qcom,sm8350-pmic-glink
+              - qcom,sm8450-pmic-glink
+              - qcom,sm8550-pmic-glink
+          - const: qcom,pmic-glink
+      - items:
+          - enum:
+              - qcom,hawi-pmic-glink
+          - const: qcom,kaanapali-pmic-glink
+          - const: qcom,pmic-glink
+      - items:
+          - enum:
+              - qcom,sm7325-pmic-glink
+          - const: qcom,qcm6490-pmic-glink
+          - const: qcom,pmic-glink
+      - items:
+          - enum:
+              - qcom,eliza-pmic-glink
+              - qcom,milos-pmic-glink
+              - qcom,sm8650-pmic-glink
+              - qcom,sm8750-pmic-glink
+              - qcom,x1e80100-pmic-glink
+          - const: qcom,sm8550-pmic-glink
+          - const: qcom,pmic-glink
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  orientation-gpios:
+    description: Array of input gpios for the Type-C connector orientation indication.
+      The GPIO indication is used to detect the orientation of the Type-C connector.
+      The array should contain a gpio entry for each PMIC Glink connector, in reg order.
+      It is defined that GPIO active level means "CC2" or Reversed/Flipped orientation.
+
+  nvmem-cells:
+    minItems: 3
+    maxItems: 3
+    description:
+      The nvmem cells contain the charge control settings, including the charge control
+      enable status, the battery state of charge (SoC) threshold for stopping charging,
+      and the battery SoC delta required to restart charging.
+
+  nvmem-cell-names:
+    items:
+      - const: charge_limit_en
+      - const: charge_limit_end
+      - const: charge_limit_delta
+
+patternProperties:
+  '^connector@\d$':
+    $ref: /schemas/connector/usb-connector.yaml#
+    required:
+      - reg
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |+
+    pmic-glink {
+        compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        connector@0 {
+            compatible = "usb-c-connector";
+            reg = <0>;
+            power-role = "dual";
+            data-role = "dual";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    endpoint {
+                        remote-endpoint = <&usb_role>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&ss_phy_out>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    endpoint {
+                        remote-endpoint = <&sbu_mux>;
+                    };
+                };
+            };
+        };
+    };
+...
+

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml

@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm-master-stats.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. (QTI) RPM Master Stats
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  The Qualcomm RPM (Resource Power Manager) architecture includes a concept
+  of "RPM Masters". They can be thought of as "the local gang leaders", usually
+  spanning a single subsystem (e.g. APSS, ADSP, CDSP). All of the RPM decisions
+  (particularly around entering hardware-driven low power modes: XO shutdown
+  and total system-wide power collapse) are first made at Master-level, and
+  only then aggregated for the entire system.
+
+  The Master Stats provide a few useful bits that can be used to assess whether
+  our device has entered the desired low-power mode, how long it took to do so,
+  the duration of that residence, how long it took to come back online,
+  how many times a given sleep state was entered and which cores are actively
+  voting for staying awake.
+
+  This scheme has been used on various SoCs in the 2013-2023 era, with some
+  newer or higher-end designs providing this information through an SMEM query.
+
+properties:
+  compatible:
+    const: qcom,rpm-master-stats
+
+  qcom,rpm-msg-ram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: Phandle to an RPM MSG RAM slice containing the master stats
+    minItems: 1
+    maxItems: 5
+    items:
+      maxItems: 1
+
+  qcom,master-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      The name of the RPM Master which owns the MSG RAM slice where this
+      instance of Master Stats resides
+    minItems: 1
+    maxItems: 5
+
+required:
+  - compatible
+  - qcom,rpm-msg-ram
+  - qcom,master-names
+
+additionalProperties: false
+
+examples:
+  - |
+    stats {
+      compatible = "qcom,rpm-master-stats";
+      qcom,rpm-msg-ram = <&apss_master_stats>,
+                         <&mpss_master_stats>,
+                         <&adsp_master_stats>,
+                         <&cdsp_master_stats>,
+                         <&tz_master_stats>;
+      qcom,master-names = "APSS",
+                          "MPSS",
+                          "ADSP",
+                          "CDSP",
+                          "TZ";
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml

@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Resource Power Manager (RPM)
+
+description:
+  This driver is used to interface with the Resource Power Manager (RPM) found
+  in various Qualcomm platforms. The RPM allows each component in the system
+  to vote for state of the system resources, such as clocks, regulators and bus
+  frequencies.
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpm-apq8064
+      - qcom,rpm-msm8660
+      - qcom,rpm-msm8960
+      - qcom,rpm-ipq8064
+      - qcom,rpm-mdm9615
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: ack
+      - const: err
+      - const: wakeup
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ram
+
+  qcom,ipc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the RPM.
+
+  clock-controller:
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,rpmcc
+
+patternProperties:
+  "^regulators(-[01])?$":
+    type: object
+    $ref: /schemas/regulator/qcom,rpm-regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - qcom,ipc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/qcom-rpm.h>
+
+    rpm@108000 {
+      compatible = "qcom,rpm-msm8960";
+      reg = <0x108000 0x1000>;
+      qcom,ipc = <&apcs 0x8 2>;
+
+      interrupts = <GIC_SPI 19 IRQ_TYPE_NONE>, <GIC_SPI 21 IRQ_TYPE_NONE>, <GIC_SPI 22 IRQ_TYPE_NONE>;
+      interrupt-names = "ack", "err", "wakeup";
+
+      regulators {
+        compatible = "qcom,rpm-pm8921-regulators";
+        vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+
+        s1 {
+          regulator-min-microvolt = <1225000>;
+          regulator-max-microvolt = <1225000>;
+
+          bias-pull-down;
+
+          qcom,switch-mode-frequency = <3200000>;
+        };
+
+        pm8921_s4: s4 {
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+
+          qcom,switch-mode-frequency = <1600000>;
+          bias-pull-down;
+
+          qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+        };
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml

@@ -0,0 +1,289 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMH RSC
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Resource Power Manager Hardened (RPMH) is the mechanism for communicating
+  with the hardened resource accelerators on Qualcomm SoCs. Requests to the
+  resources can be written to the Trigger Command Set (TCS)  registers and
+  using a (addr, val) pair and triggered. Messages in the TCS are then sent in
+  sequence over an internal bus.
+
+  The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity
+  (Resource State Coordinator a.k.a RSC) that can handle multiple sleep and
+  active/wake resource requests. Multiple such DRVs can exist in a SoC and can
+  be written to from Linux. The structure of each DRV follows the same template
+  with a few variations that are captured by the properties here.
+
+  A TCS may be triggered from Linux or triggered by the F/W after all the CPUs
+  have powered off to facilitate idle power saving. TCS could be classified as::
+    ACTIVE  - Triggered by Linux
+    SLEEP   - Triggered by F/W
+    WAKE    - Triggered by F/W
+    CONTROL - Triggered by F/W
+  See also: <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+  The order in which they are described in the DT, should match the hardware
+  configuration.
+
+  Requests can be made for the state of a resource, when the subsystem is
+  active or idle. When all subsystems like Modem, GPU, CPU are idle, the
+  resource state will be an aggregate of the sleep votes from each of those
+  subsystems. Clients may request a sleep value for their shared resources in
+  addition to the active mode requests.
+
+  Drivers that want to use the RSC to communicate with RPMH must specify their
+  bindings as child nodes of the RSC controllers they wish to communicate with.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sc7180-rpmh-apps-rsc
+              - qcom,sdm845-rpmh-apps-rsc
+          - const: qcom,rpmh-rsc
+      - const: qcom,rpmh-rsc
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    description:
+      The interrupt that trips when a message complete/response is received for
+      this DRV from the accelerators.
+      Number of interrupts must match number of DRV blocks.
+
+  label:
+    description:
+      Name for the RSC. The name would be used in trace logs.
+
+  qcom,drv-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The ID of the DRV in the RSC block that will be used by this controller.
+
+  qcom,tcs-config:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 4
+    maxItems: 4
+    items:
+      items:
+        - description: |
+            TCS type::
+             - ACTIVE_TCS
+             - SLEEP_TCS
+             - WAKE_TCS
+             - CONTROL_TCS
+          enum: [ 0, 1, 2, 3 ]
+        - description: Number of TCS
+    description: |
+      The tuple defining the configuration of TCS. Must have two cells which
+      describe each TCS type.  The order of the TCS must match the hardware
+      configuration.
+
+  qcom,tcs-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The offset of the TCS blocks.
+
+  reg:
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: drv-0
+      - const: drv-1
+      - const: drv-2
+      - const: drv-3
+
+  power-domains:
+    maxItems: 1
+
+  bcm-voter:
+    $ref: /schemas/interconnect/qcom,bcm-voter.yaml#
+
+  clock-controller:
+    $ref: /schemas/clock/qcom,rpmhcc.yaml#
+
+  power-controller:
+    $ref: /schemas/power/qcom,rpmpd.yaml#
+
+patternProperties:
+  '^regulators(-[0-9])?$':
+    $ref: /schemas/regulator/qcom,rpmh-regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - interrupts
+  - qcom,drv-id
+  - qcom,tcs-config
+  - qcom,tcs-offset
+  - reg
+  - reg-names
+
+allOf:
+  # Some platforms may lack a OSI-mode PSCI implementation, which implies the
+  # system power domain can't provide feedback about entering power collapse
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,sc7180-rpmh-apps-rsc
+                - qcom,sdm845-rpmh-apps-rsc
+    then:
+      required:
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    // For a TCS whose RSC base address is 0x179C0000 and is at a DRV id of
+    // 2, the register offsets for DRV2 start at 0D00, the register
+    // calculations are like this::
+    // DRV0: 0x179C0000
+    // DRV2: 0x179C0000 + 0x10000 = 0x179D0000
+    // DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000
+    // TCS-OFFSET: 0xD00
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+    rsc@179c0000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0x179c0000 0x10000>,
+              <0x179d0000 0x10000>,
+              <0x179e0000 0x10000>;
+        reg-names = "drv-0", "drv-1", "drv-2";
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+        label = "apps_rsc";
+        qcom,tcs-offset = <0xd00>;
+        qcom,drv-id = <2>;
+        qcom,tcs-config = <ACTIVE_TCS  2>,
+                          <SLEEP_TCS   3>,
+                          <WAKE_TCS    3>,
+                          <CONTROL_TCS 1>;
+        power-domains = <&CLUSTER_PD>;
+      };
+
+  - |
+    // For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the
+    // register offsets for DRV0 start at 01C00, the register calculations are
+    // like this::
+    // DRV0: 0xAF20000
+    // TCS-OFFSET: 0x1C00
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+    rsc@af20000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0xaf20000 0x10000>;
+        reg-names = "drv-0";
+        interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+        label = "disp_rsc";
+        qcom,tcs-offset = <0x1c00>;
+        qcom,drv-id = <0>;
+        qcom,tcs-config = <ACTIVE_TCS  0>,
+                          <SLEEP_TCS   1>,
+                          <WAKE_TCS    1>,
+                          <CONTROL_TCS 0>;
+        power-domains = <&CLUSTER_PD>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    rsc@18200000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0x18200000 0x10000>,
+              <0x18210000 0x10000>,
+              <0x18220000 0x10000>;
+        reg-names = "drv-0", "drv-1", "drv-2";
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+        label = "apps_rsc";
+        qcom,tcs-offset = <0xd00>;
+        qcom,drv-id = <2>;
+        qcom,tcs-config = <ACTIVE_TCS  2>,
+                          <SLEEP_TCS   3>,
+                          <WAKE_TCS    3>,
+                          <CONTROL_TCS 0>;
+        power-domains = <&CLUSTER_PD>;
+
+        clock-controller {
+            compatible = "qcom,sm8350-rpmh-clk";
+            #clock-cells = <1>;
+            clock-names = "xo";
+            clocks = <&xo_board>;
+        };
+
+        power-controller {
+            compatible = "qcom,sm8350-rpmhpd";
+            #power-domain-cells = <1>;
+            operating-points-v2 = <&rpmhpd_opp_table>;
+
+            rpmhpd_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                rpmhpd_opp_ret: opp1 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+                };
+
+                rpmhpd_opp_min_svs: opp2 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+                };
+
+                rpmhpd_opp_low_svs: opp3 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+                };
+
+                rpmhpd_opp_svs: opp4 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+                };
+
+                rpmhpd_opp_svs_l1: opp5 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+                };
+
+                rpmhpd_opp_nom: opp6 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+                };
+
+                rpmhpd_opp_nom_l1: opp7 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+                };
+
+                rpmhpd_opp_nom_l2: opp8 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+                };
+
+                rpmhpd_opp_turbo: opp9 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+                };
+
+                rpmhpd_opp_turbo_l1: opp10 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+                };
+            };
+        };
+
+        bcm-voter {
+            compatible = "qcom,bcm-voter";
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,sa8255p-geni-se-qup.yaml

@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,sa8255p-geni-se-qup.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GENI Serial Engine QUP Wrapper Controller
+
+maintainers:
+  - Praveen Talari <quic_ptalari@quicinc.com>
+
+description:
+  Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
+  is a programmable module for supporting a wide range of serial interfaces
+  like UART, SPI, I2C, I3C, etc. A single QUP module can provide up to 8 Serial
+  Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
+  Wrapper controller is modeled as a node with zero or more child nodes each
+  representing a serial engine.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,sa8255p-geni-se-qup
+      - items:
+          - const: qcom,sa8797p-geni-se-qup
+          - const: qcom,sa8255p-geni-se-qup
+
+  reg:
+    description: QUP wrapper common register address and length.
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+patternProperties:
+  "spi@[0-9a-f]+$":
+    type: object
+    description: GENI serial engine based SPI controller. SPI in master mode
+                 supports up to 50MHz, up to four chip selects, programmable
+                 data path from 4 bits to 32 bits and numerous protocol
+                 variants.
+    additionalProperties: true
+
+    properties:
+      compatible:
+        oneOf:
+          - const: qcom,sa8255p-geni-spi
+          - items:
+              - const: qcom,sa8797p-geni-spi
+              - const: qcom,sa8255p-geni-spi
+
+  "i2c@[0-9a-f]+$":
+    type: object
+    description: GENI serial engine based I2C controller.
+    additionalProperties: true
+
+    properties:
+      compatible:
+        oneOf:
+          - const: qcom,sa8255p-geni-i2c
+          - items:
+              - const: qcom,sa8797p-geni-i2c
+              - const: qcom,sa8255p-geni-i2c
+
+  "serial@[0-9a-f]+$":
+    type: object
+    description: GENI Serial Engine based UART Controller.
+    additionalProperties: true
+
+    properties:
+      compatible:
+        oneOf:
+          - enum:
+              - qcom,sa8255p-geni-uart
+              - qcom,sa8255p-geni-debug-uart
+          - items:
+              - const: qcom,sa8797p-geni-uart
+              - const: qcom,sa8255p-geni-uart
+          - items:
+              - const: qcom,sa8797p-geni-debug-uart
+              - const: qcom,sa8255p-geni-debug-uart
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        geniqup@9c0000 {
+            compatible = "qcom,sa8255p-geni-se-qup";
+            reg = <0 0x9c0000 0 0x6000>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+
+            serial@990000 {
+                compatible = "qcom,sa8255p-geni-uart";
+                reg = <0 0x990000 0 0x4000>;
+                interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+                power-domains = <&scmi0_pd 0>, <&scmi0_dvfs 0>;
+                power-domain-names = "power", "perf";
+            };
+        };
+    };
+...

linux-7.2.3/Documentation/devicetree/bindings/soc/qcom/qcom,saw2.yaml

@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,saw2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Subsystem Power Manager / SPM AVS Wrapper 2 (SAW2)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  The Qualcomm Subsystem Power Manager is used to control the peripheral logic
+  surrounding the application cores in Qualcomm platforms.
+
+  The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
+  Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
+  power-controller that transitions a piece of hardware (like a processor or
+  subsystem) into and out of low power modes via a direct connection to
+  the PMIC. It can also be wired up to interact with other processors in the
+  system, notifying them when a low power state is entered or exited.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,ipq4019-saw2-cpu
+          - qcom,ipq4019-saw2-l2
+          - qcom,ipq8064-saw2-cpu
+          - qcom,sdm660-gold-saw2-v4.1-l2
+          - qcom,sdm660-silver-saw2-v4.1-l2
+          - qcom,msm8998-gold-saw2-v4.1-l2
+          - qcom,msm8998-silver-saw2-v4.1-l2
+          - qcom,msm8909-saw2-v3.0-cpu
+          - qcom,msm8916-saw2-v3.0-cpu
+          - qcom,msm8939-saw2-v3.0-cpu
+          - qcom,msm8226-saw2-v2.1-cpu
+          - qcom,msm8226-saw2-v2.1-l2
+          - qcom,msm8960-saw2-cpu
+          - qcom,msm8974-saw2-v2.1-cpu
+          - qcom,msm8974-saw2-v2.1-l2
+          - qcom,msm8976-gold-saw2-v2.3-l2
+          - qcom,msm8976-silver-saw2-v2.3-l2
+          - qcom,apq8084-saw2-v2.1-cpu
+          - qcom,apq8084-saw2-v2.1-l2
+          - qcom,apq8064-saw2-v1.1-cpu
+      - const: qcom,saw2
+
+  reg:
+    items:
+      - description: Base address and size of the SPM register region
+      - description: Base address and size of the alias register region
+    minItems: 1
+
+  regulator:
+    $ref: /schemas/regulator/regulator.yaml#
+    description: Indicates that this SPM device acts as a regulator device
+      device for the core (CPU or Cache) the SPM is attached to.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    /* Example 1: SoC using SAW2 and kpss-acc-v2 CPUIdle */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            enable-method = "qcom,kpss-acc-v2";
+            qcom,acc = <&acc0>;
+            qcom,saw = <&saw0>;
+            reg = <0x0>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+    };
+
+    saw0: power-manager@f9089000 {
+        compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+        reg = <0xf9089000 0x1000>;
+    };
+
+  - |
+
+    /*
+     * Example 2: New-gen multi cluster SoC using SAW only for L2;
+     * This does not require any cpuidle driver, nor any cpu phandle.
+     */
+    power-manager@17812000 {
+        compatible = "qcom,msm8998-gold-saw2-v4.1-l2", "qcom,saw2";
+        reg = <0x17812000 0x1000>;
+    };
+
+    power-manager@17912000 {
+        compatible = "qcom,msm8998-silver-saw2-v4.1-l2", "qcom,saw2";
+        reg = <0x17912000 0x1000>;
+    };
+
+  - |
+    /*
+     * Example 3: SAW2 with the bundled regulator definition.
+     */
+    power-manager@2089000 {
+        compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+        reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+
+        regulator {
+            regulator-min-microvolt = <850000>;
+            regulator-max-microvolt = <1300000>;
+        };
+    };
+...