Resguardo inicial

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# # Copyright 2020 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/devapc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Device Access Permission Control driver
+
+description: |
+  MediaTek bus fabric provides TrustZone security support and data
+  protection to prevent slaves from being accessed by unexpected masters.
+  The security violation is logged and sent to the processor for further
+  analysis and countermeasures.
+
+maintainers:
+  - Neal Liu <neal.liu@mediatek.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6779-devapc
+      - mediatek,mt8186-devapc
+
+  reg:
+    description: The base address of devapc register bank
+    maxItems: 1
+
+  interrupts:
+    description: A single interrupt specifier
+    maxItems: 1
+
+  clocks:
+    description: Contains module clock source and clock names
+    maxItems: 1
+
+  clock-names:
+    description: Names of the clocks list in clocks property
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt6779-clk.h>
+
+    devapc: devapc@10207000 {
+      compatible = "mediatek,mt6779-devapc";
+      reg = <0x10207000 0x1000>;
+      interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&infracfg_ao CLK_INFRA_DEVICE_APC>;
+      clock-names = "devapc-infra-clock";
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml

@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,ccorr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek color correction
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek color correction with 3X3 matrix.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-ccorr
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    mdp3_ccorr: mdp3-ccorr@1401c000 {
+      compatible = "mediatek,mt8183-mdp3-ccorr";
+      reg = <0x1401c000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_CCORR_SOF>,
+                            <CMDQ_EVENT_MDP_CCORR_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_CCORR>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mt7986-wo-ccif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Wireless Ethernet Dispatch (WED) WO controller interface for MT7986
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The MediaTek wo-ccif provides a configuration interface for WED WO
+  controller used to perform offload rx packet processing (e.g. 802.11
+  aggregation packet reordering or rx header translation) on MT7986 soc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7986-wo-ccif
+          - mediatek,mt7988-wo-ccif
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      syscon@151a5000 {
+        compatible = "mediatek,mt7986-wo-ccif", "syscon";
+        reg = <0 0x151a5000 0 0x1000>;
+        interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt8183-dvfsrc.yaml

@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mt8183-dvfsrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Dynamic Voltage and Frequency Scaling Resource Collector (DVFSRC)
+
+description:
+  The Dynamic Voltage and Frequency Scaling Resource Collector (DVFSRC) is a
+  Hardware module used to collect all the requests from both software and the
+  various remote processors embedded into the SoC and decide about a minimum
+  operating voltage and a minimum DRAM frequency to fulfill those requests in
+  an effort to provide the best achievable performance per watt.
+  This hardware IP is capable of transparently performing direct register R/W
+  on all of the DVFSRC-controlled regulators and SoC bandwidth knobs.
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Henry Chen <henryc.chen@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6893-dvfsrc
+          - mediatek,mt8183-dvfsrc
+          - mediatek,mt8195-dvfsrc
+      - items:
+          - const: mediatek,mt8192-dvfsrc
+          - const: mediatek,mt8195-dvfsrc
+
+  reg:
+    maxItems: 1
+    description: DVFSRC common register address and length.
+
+  clocks:
+    items:
+      - description: Clock that drives the DVFSRC MCU
+
+  regulators:
+    type: object
+    $ref: /schemas/regulator/mediatek,mt6873-dvfsrc-regulator.yaml#
+
+  interconnect:
+    type: object
+    $ref: /schemas/interconnect/mediatek,mt8183-emi.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        system-controller@10012000 {
+            compatible = "mediatek,mt8195-dvfsrc";
+            reg = <0 0x10012000 0 0x1000>;
+            clocks = <&topckgen CLK_TOP_DVFSRC>;
+
+            regulators {
+                compatible = "mediatek,mt8195-dvfsrc-regulator";
+
+                dvfsrc_vcore: dvfsrc-vcore {
+                        regulator-name = "dvfsrc-vcore";
+                        regulator-min-microvolt = <550000>;
+                        regulator-max-microvolt = <750000>;
+                        regulator-always-on;
+                };
+
+                dvfsrc_vscp: dvfsrc-vscp {
+                        regulator-name = "dvfsrc-vscp";
+                        regulator-min-microvolt = <550000>;
+                        regulator-max-microvolt = <750000>;
+                        regulator-always-on;
+                };
+            };
+
+            emi_icc: interconnect {
+                compatible = "mediatek,mt8195-emi";
+                #interconnect-cells = <1>;
+            };
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml

@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mutex.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek mutex
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek mutex, namely MUTEX, is used to send the triggers signals called
+  Start Of Frame (SOF) / End Of Frame (EOF) to each sub-modules on the display
+  data path or MDP data path.
+  In some SoC, such as mt2701, MUTEX could be a hardware mutex which protects
+  the shadow register.
+  MUTEX device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-disp-mutex
+      - mediatek,mt2712-disp-mutex
+      - mediatek,mt6795-disp-mutex
+      - mediatek,mt8167-disp-mutex
+      - mediatek,mt8173-disp-mutex
+      - mediatek,mt8183-disp-mutex
+      - mediatek,mt8186-disp-mutex
+      - mediatek,mt8186-mdp3-mutex
+      - mediatek,mt8188-disp-mutex
+      - mediatek,mt8188-vpp-mutex
+      - mediatek,mt8192-disp-mutex
+      - mediatek,mt8195-disp-mutex
+      - mediatek,mt8195-vpp-mutex
+      - mediatek,mt8365-disp-mutex
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: MUTEX Clock
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2701-disp-mutex
+              - mediatek,mt2712-disp-mutex
+              - mediatek,mt6795-disp-mutex
+              - mediatek,mt8173-disp-mutex
+              - mediatek,mt8186-disp-mutex
+              - mediatek,mt8186-mdp3-mutex
+              - mediatek,mt8192-disp-mutex
+              - mediatek,mt8195-disp-mutex
+    then:
+      required:
+        - clocks
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mutex: mutex@14020000 {
+            compatible = "mediatek,mt8173-disp-mutex";
+            reg = <0 0x14020000 0 0x1000>;
+            interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_MUTEX_32K>;
+            mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
+                                  <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml

@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,pwrap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek PMIC Wrapper
+
+maintainers:
+  - Flora Fu <flora.fu@mediatek.com>
+  - Alexandre Mergnat <amergnat@baylibre.com>
+
+description:
+  On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
+  is not directly visible to the CPU, but only through the PMIC wrapper
+  inside the SoC. The communication between the SoC and the PMIC can
+  optionally be encrypted. Also a non standard Dual IO SPI mode can be
+  used to increase speed.
+
+  IP Pairing
+
+  On MT8135 the pins of some SoC internal peripherals can be on the PMIC.
+  The signals of these pins are routed over the SPI bus using the pwrap
+  bridge. In the binding description below the properties needed for bridging
+  are marked with "IP Pairing". These are optional on SoCs which do not support
+  IP Pairing
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-pwrap
+              - mediatek,mt6765-pwrap
+              - mediatek,mt6779-pwrap
+              - mediatek,mt6795-pwrap
+              - mediatek,mt6797-pwrap
+              - mediatek,mt6873-pwrap
+              - mediatek,mt7622-pwrap
+              - mediatek,mt8135-pwrap
+              - mediatek,mt8173-pwrap
+              - mediatek,mt8183-pwrap
+              - mediatek,mt8186-pwrap
+              - mediatek,mt8195-pwrap
+              - mediatek,mt8365-pwrap
+              - mediatek,mt8516-pwrap
+      - items:
+          - enum:
+              - mediatek,mt8186-pwrap
+              - mediatek,mt8195-pwrap
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt8188-pwrap
+              - mediatek,mt8189-pwrap
+          - const: mediatek,mt8195-pwrap
+          - const: syscon
+
+  reg:
+    minItems: 1
+    items:
+      - description: PMIC wrapper registers
+      - description: IP pairing registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: pwrap
+      - const: pwrap-bridge
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: SPI bus clock
+      - description: Main module clock
+      - description: System module clock
+      - description: Timer module clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: spi
+      - const: wrap
+      - const: sys
+      - const: tmr
+
+  resets:
+    minItems: 1
+    items:
+      - description: PMIC wrapper reset
+      - description: IP pairing reset
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: pwrap
+      - const: pwrap-bridge
+
+  power-domains:
+    maxItems: 1
+
+  pmic:
+    type: object
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+dependentRequired:
+  resets: [reset-names]
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8365-pwrap
+    then:
+      properties:
+        clocks:
+          minItems: 4
+
+        clock-names:
+          minItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8173-pwrap
+    then:
+      properties:
+        power-domains: true
+    else:
+      properties:
+        power-domains: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/mt8135-resets.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pwrap@1000f000 {
+            compatible = "mediatek,mt8135-pwrap";
+            reg = <0 0x1000f000 0 0x1000>,
+                  <0 0x11017000 0 0x1000>;
+            reg-names = "pwrap", "pwrap-bridge";
+            interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk26m>, <&clk26m>;
+            clock-names = "spi", "wrap";
+            resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+                     <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+            reset-names = "pwrap", "pwrap-bridge";
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml

@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,wdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Write Direct Memory Access
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek Write Direct Memory Access(WDMA) component used to write
+  the data into DMA.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-wdma
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    mdp3_wdma: mdp3-wdma@14006000 {
+      compatible = "mediatek,mt8183-mdp3-wdma";
+      reg = <0x14006000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_WDMA0_SOF>,
+                            <CMDQ_EVENT_MDP_WDMA0_EOF>;
+      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+      clocks = <&mmsys CLK_MM_MDP_WDMA0>;
+      iommus = <&iommu>;
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml

@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Smart Voltage Scaling (SVS)
+
+maintainers:
+  - Roger Lu <roger.lu@mediatek.com>
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Kevin Hilman <khilman@kernel.org>
+
+description: |+
+  The SVS engine is a piece of hardware which has several
+  controllers(banks) for calculating suitable voltage to
+  different power domains(CPU/GPU/CCI) according to
+  chip process corner, temperatures and other factors. Then DVFS
+  driver could apply SVS bank voltage to PMIC/Buck.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-svs
+      - mediatek,mt8186-svs
+      - mediatek,mt8188-svs
+      - mediatek,mt8192-svs
+      - mediatek,mt8195-svs
+
+  reg:
+    maxItems: 1
+    description: Address range of the MTK SVS controller.
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Main clock for MTK SVS controller to work.
+
+  clock-names:
+    const: main
+
+  nvmem-cells:
+    minItems: 1
+    description:
+      Phandle to the calibration data provided by a nvmem device.
+    items:
+      - description: SVS efuse for SVS controller
+      - description: Thermal efuse for SVS controller
+
+  nvmem-cell-names:
+    items:
+      - const: svs-calibration-data
+      - const: t-calibration-data
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: svs_rst
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        svs@1100b000 {
+            compatible = "mediatek,mt8183-svs";
+            reg = <0 0x1100b000 0 0x1000>;
+            interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&infracfg CLK_INFRA_THERM>;
+            clock-names = "main";
+            nvmem-cells = <&svs_calibration>, <&thermal_calibration>;
+            nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+        };
+    };

linux-7.2.3/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt

@@ -0,0 +1,79 @@
+MediaTek SCPSYS
+===============
+
+The System Control Processor System (SCPSYS) has several power management
+related tasks in the system. The tasks include thermal measurement, dynamic
+voltage frequency scaling (DVFS), interrupt filter and lowlevel sleep control.
+The System Power Manager (SPM) inside the SCPSYS is for the MTCMOS power
+domain control.
+
+The driver implements the Generic PM domain bindings described in
+power/power-domain.yaml. It provides the power domains defined in
+- include/dt-bindings/power/mt8173-power.h
+- include/dt-bindings/power/mt6797-power.h
+- include/dt-bindings/power/mt6765-power.h
+- include/dt-bindings/power/mt2701-power.h
+- include/dt-bindings/power/mt2712-power.h
+- include/dt-bindings/power/mt7622-power.h
+
+Required properties:
+- compatible: Should be one of:
+	- "mediatek,mt2701-scpsys"
+	- "mediatek,mt2712-scpsys"
+	- "mediatek,mt6735-scpsys"
+	- "mediatek,mt6765-scpsys"
+	- "mediatek,mt6797-scpsys"
+	- "mediatek,mt7622-scpsys"
+	- "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys": For MT7623 SoC
+	- "mediatek,mt7623a-scpsys": For MT7623A SoC
+	- "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys": For MT7629 SoC
+	- "mediatek,mt8173-scpsys"
+- #power-domain-cells: Must be 1
+- reg: Address range of the SCPSYS unit
+- infracfg: must contain a phandle to the infracfg controller
+- clock, clock-names: clocks according to the common clock binding.
+                      These are clocks which hardware needs to be
+                      enabled before enabling certain power domains.
+	Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif"
+	Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec"
+	Required clocks for MT6765: MUX: "mm", "mfg"
+				    CG: "mm-0", "mm-1", "mm-2", "mm-3", "isp-0",
+					"isp-1", "cam-0", "cam-1", "cam-2",
+					"cam-3","cam-4"
+	Required clocks for MT6797: "mm", "mfg", "vdec"
+	Required clocks for MT7622 or MT7629: "hif_sel"
+	Required clocks for MT7623A: "ethif"
+	Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
+
+Optional properties:
+- vdec-supply: Power supply for the vdec power domain
+- venc-supply: Power supply for the venc power domain
+- isp-supply: Power supply for the isp power domain
+- mm-supply: Power supply for the mm power domain
+- venc_lt-supply: Power supply for the venc_lt power domain
+- audio-supply: Power supply for the audio power domain
+- usb-supply: Power supply for the usb power domain
+- mfg_async-supply: Power supply for the mfg_async power domain
+- mfg_2d-supply: Power supply for the mfg_2d power domain
+- mfg-supply: Power supply for the mfg power domain
+
+Example:
+
+	scpsys: scpsys@10006000 {
+		#power-domain-cells = <1>;
+		compatible = "mediatek,mt8173-scpsys";
+		reg = <0 0x10006000 0 0x1000>;
+		infracfg = <&infracfg>;
+		clocks = <&clk26m>,
+			 <&topckgen CLK_TOP_MM_SEL>;
+			 <&topckgen CLK_TOP_VENC_SEL>,
+			 <&topckgen CLK_TOP_VENC_LT_SEL>;
+		clock-names = "mfg", "mm", "venc", "venc_lt";
+	};
+
+Example consumer:
+
+	afe: mt8173-afe-pcm@11220000 {
+		compatible = "mediatek,mt8173-afe-pcm";
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_AUDIO>;
+	};