Resguardo inicial

linux-7.2.3/Documentation/networking/device_drivers/ethernet/amd/pds_core.rst

@@ -0,0 +1,139 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+========================================================
+Linux Driver for the AMD/Pensando(R) DSC adapter family
+========================================================
+
+Copyright(c) 2023 Advanced Micro Devices, Inc
+
+Identifying the Adapter
+=======================
+
+To find if one or more AMD/Pensando PCI Core devices are installed on the
+host, check for the PCI devices::
+
+  # lspci -d 1dd8:100c
+  b5:00.0 Processing accelerators: Pensando Systems Device 100c
+  b6:00.0 Processing accelerators: Pensando Systems Device 100c
+
+If such devices are listed as above, then the pds_core.ko driver should find
+and configure them for use.  There should be log entries in the kernel
+messages such as these::
+
+  $ dmesg | grep pds_core
+  pds_core 0000:b5:00.0: 252.048 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x16 link)
+  pds_core 0000:b5:00.0: FW: 1.60.0-73
+  pds_core 0000:b6:00.0: 252.048 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x16 link)
+  pds_core 0000:b6:00.0: FW: 1.60.0-73
+
+Driver and firmware version information can be gathered with devlink::
+
+  $ devlink dev info pci/0000:b5:00.0
+  pci/0000:b5:00.0:
+    driver pds_core
+    serial_number FLM18420073
+    versions:
+        fixed:
+          asic.id 0x0
+          asic.rev 0x0
+        running:
+          fw 1.51.0-73
+        stored:
+          fw.goldfw 1.15.9-C-22
+          fw.mainfwa 1.60.0-73
+          fw.mainfwb 1.60.0-57
+
+Info versions
+=============
+
+The ``pds_core`` driver reports the following versions
+
+.. list-table:: devlink info versions implemented
+   :widths: 5 5 90
+
+   * - Name
+     - Type
+     - Description
+   * - ``fw``
+     - running
+     - Version of firmware running on the device
+   * - ``fw.goldfw``
+     - stored
+     - Version of firmware stored in the goldfw slot
+   * - ``fw.mainfwa``
+     - stored
+     - Version of firmware stored in the mainfwa slot
+   * - ``fw.mainfwb``
+     - stored
+     - Version of firmware stored in the mainfwb slot
+   * - ``asic.id``
+     - fixed
+     - The ASIC type for this device
+   * - ``asic.rev``
+     - fixed
+     - The revision of the ASIC for this device
+
+Parameters
+==========
+
+The ``pds_core`` driver implements the following generic
+parameters for controlling the functionality to be made available
+as auxiliary_bus devices.
+
+.. list-table:: Generic parameters implemented
+   :widths: 5 5 8 82
+
+   * - Name
+     - Mode
+     - Type
+     - Description
+   * - ``enable_vnet``
+     - runtime
+     - Boolean
+     - Enables vDPA functionality through an auxiliary_bus device
+
+Firmware Management
+===================
+
+The ``flash`` command can update a the DSC firmware.  The downloaded firmware
+will be saved into either of firmware bank 1 or bank 2, whichever is not
+currently in use, and that bank will used for the next boot::
+
+  # devlink dev flash pci/0000:b5:00.0 \
+            file pensando/dsc_fw_1.63.0-22.tar
+
+Health Reporters
+================
+
+The driver supports a devlink health reporter for FW status::
+
+  # devlink health show pci/0000:2b:00.0 reporter fw
+  pci/0000:2b:00.0:
+    reporter fw
+      state healthy error 0 recover 0
+  # devlink health diagnose pci/0000:2b:00.0 reporter fw
+   Status: healthy State: 1 Generation: 0 Recoveries: 0
+
+Enabling the driver
+===================
+
+The driver is enabled via the standard kernel configuration system,
+using the make command::
+
+  make oldconfig/menuconfig/etc.
+
+The driver is located in the menu structure at:
+
+  -> Device Drivers
+    -> Network device support (NETDEVICES [=y])
+      -> Ethernet driver support
+        -> AMD devices
+          -> AMD/Pensando Ethernet PDS_CORE Support
+
+Support
+=======
+
+For general Linux networking support, please use the netdev mailing
+list, which is monitored by AMD/Pensando personnel::
+
+  netdev@vger.kernel.org

linux-7.2.3/Documentation/networking/device_drivers/ethernet/amd/pds_vdpa.rst

@@ -0,0 +1,85 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. note: can be edited and viewed with /usr/bin/formiko-vim
+
+==========================================================
+PCI vDPA driver for the AMD/Pensando(R) DSC adapter family
+==========================================================
+
+AMD/Pensando vDPA VF Device Driver
+
+Copyright(c) 2023 Advanced Micro Devices, Inc
+
+Overview
+========
+
+The ``pds_vdpa`` driver is an auxiliary bus driver that supplies
+a vDPA device for use by the virtio network stack.  It is used with
+the Pensando Virtual Function devices that offer vDPA and virtio queue
+services.  It depends on the ``pds_core`` driver and hardware for the PF
+and VF PCI handling as well as for device configuration services.
+
+Using the device
+================
+
+The ``pds_vdpa`` device is enabled via multiple configuration steps and
+depends on the ``pds_core`` driver to create and enable SR-IOV Virtual
+Function devices.  After the VFs are enabled, we enable the vDPA service
+in the ``pds_core`` device to create the auxiliary devices used by pds_vdpa.
+
+Example steps:
+
+.. code-block:: bash
+
+  #!/bin/bash
+
+  modprobe pds_core
+  modprobe vdpa
+  modprobe pds_vdpa
+
+  PF_BDF=`ls /sys/module/pds_core/drivers/pci\:pds_core/*/sriov_numvfs | awk -F / '{print $7}'`
+
+  # Enable vDPA VF auxiliary device(s) in the PF
+  devlink dev param set pci/$PF_BDF name enable_vnet cmode runtime value true
+
+  # Create a VF for vDPA use
+  echo 1 > /sys/bus/pci/drivers/pds_core/$PF_BDF/sriov_numvfs
+
+  # Find the vDPA services/devices available
+  PDS_VDPA_MGMT=`vdpa mgmtdev show | grep vDPA | head -1 | cut -d: -f1`
+
+  # Create a vDPA device for use in virtio network configurations
+  vdpa dev add name vdpa1 mgmtdev $PDS_VDPA_MGMT mac 00:11:22:33:44:55
+
+  # Set up an ethernet interface on the vdpa device
+  modprobe virtio_vdpa
+
+
+
+Enabling the driver
+===================
+
+The driver is enabled via the standard kernel configuration system,
+using the make command::
+
+  make oldconfig/menuconfig/etc.
+
+The driver is located in the menu structure at:
+
+  -> Device Drivers
+    -> Network device support (NETDEVICES [=y])
+      -> Ethernet driver support
+        -> Pensando devices
+          -> Pensando Ethernet PDS_VDPA Support
+
+Support
+=======
+
+For general Linux networking support, please use the netdev mailing
+list, which is monitored by Pensando personnel::
+
+  netdev@vger.kernel.org
+
+For more specific support needs, please use the Pensando driver support
+email::
+
+  drivers@pensando.io

linux-7.2.3/Documentation/networking/device_drivers/ethernet/amd/pds_vfio_pci.rst

@@ -0,0 +1,79 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. note: can be edited and viewed with /usr/bin/formiko-vim
+
+==========================================================
+PCI VFIO driver for the AMD/Pensando(R) DSC adapter family
+==========================================================
+
+AMD/Pensando Linux VFIO PCI Device Driver
+Copyright(c) 2023 Advanced Micro Devices, Inc.
+
+Overview
+========
+
+The ``pds-vfio-pci`` module is a PCI driver that supports Live Migration
+capable Virtual Function (VF) devices in the DSC hardware.
+
+Using the device
+================
+
+The pds-vfio-pci device is enabled via multiple configuration steps and
+depends on the ``pds_core`` driver to create and enable SR-IOV Virtual
+Function devices.
+
+Shown below are the steps to bind the driver to a VF and also to the
+associated auxiliary device created by the ``pds_core`` driver. This
+example assumes the pds_core and pds-vfio-pci modules are already
+loaded.
+
+.. code-block:: bash
+  :name: example-setup-script
+
+  #!/bin/bash
+
+  PF_BUS="0000:60"
+  PF_BDF="0000:60:00.0"
+  VF_BDF="0000:60:00.1"
+
+  # Prevent non-vfio VF driver from probing the VF device
+  echo 0 > /sys/class/pci_bus/$PF_BUS/device/$PF_BDF/sriov_drivers_autoprobe
+
+  # Create single VF for Live Migration via pds_core
+  echo 1 > /sys/bus/pci/drivers/pds_core/$PF_BDF/sriov_numvfs
+
+  # Allow the VF to be bound to the pds-vfio-pci driver
+  echo "pds-vfio-pci" > /sys/class/pci_bus/$PF_BUS/device/$VF_BDF/driver_override
+
+  # Bind the VF to the pds-vfio-pci driver
+  echo "$VF_BDF" > /sys/bus/pci/drivers/pds-vfio-pci/bind
+
+After performing the steps above, a file in /dev/vfio/<iommu_group>
+should have been created.
+
+
+Enabling the driver
+===================
+
+The driver is enabled via the standard kernel configuration system,
+using the make command::
+
+  make oldconfig/menuconfig/etc.
+
+The driver is located in the menu structure at:
+
+  -> Device Drivers
+    -> VFIO Non-Privileged userspace driver framework
+      -> VFIO support for PDS PCI devices
+
+Support
+=======
+
+For general Linux networking support, please use the netdev mailing
+list, which is monitored by Pensando personnel::
+
+  netdev@vger.kernel.org
+
+For more specific support needs, please use the Pensando driver support
+email::
+
+  drivers@pensando.io