lastdragon/linux-kernel
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Resguardo inicial

Browse Source
This commit is contained in:
lastdragon
2026-09-06 12:53:21 -06:00
parent 662efe3c2a
commit ad2088d178
94853 changed files with 43200404 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
linux-7.2.3/Documentation/virt/kvm/devices/README
+1
View File
@@ -0,0 +1 @@
This directory contains specific device bindings for KVM_CAP_DEVICE_CTRL.
linux-7.2.3/Documentation/virt/kvm/devices/arm-vgic-its.rst
+215
View File
@@ -0,0 +1,215 @@
.. SPDX-License-Identifier: GPL-2.0
===============================================
ARM Virtual Interrupt Translation Service (ITS)
===============================================
Device types supported:
KVM_DEV_TYPE_ARM_VGIC_ITS ARM Interrupt Translation Service Controller
The ITS allows MSI(-X) interrupts to be injected into guests. This extension is
optional. Creating a virtual ITS controller also requires a host GICv3 (see
arm-vgic-v3.txt), but does not depend on having physical ITS controllers.
There can be multiple ITS controllers per guest, each of them has to have
a separate, non-overlapping MMIO region.
Groups
======
KVM_DEV_ARM_VGIC_GRP_ADDR
-------------------------
Attributes:
KVM_VGIC_ITS_ADDR_TYPE (rw, 64-bit)
Base address in the guest physical address space of the GICv3 ITS
control register frame.
This address needs to be 64K aligned and the region covers 128K.
Errors:
======= =================================================
-E2BIG Address outside of addressable IPA range
-EINVAL Incorrectly aligned address
-EEXIST Address already configured
-EFAULT Invalid user pointer for attr->addr.
-ENODEV Incorrect attribute or the ITS is not supported.
======= =================================================
KVM_DEV_ARM_VGIC_GRP_CTRL
-------------------------
Attributes:
KVM_DEV_ARM_VGIC_CTRL_INIT
request the initialization of the ITS, no additional parameter in
kvm_device_attr.addr.
KVM_DEV_ARM_ITS_CTRL_RESET
reset the ITS, no additional parameter in kvm_device_attr.addr.
See "ITS Reset State" section.
KVM_DEV_ARM_ITS_SAVE_TABLES
save the ITS table data into guest RAM, at the location provisioned
by the guest in corresponding registers/table entries. Should userspace
require a form of dirty tracking to identify which pages are modified
by the saving process, it should use a bitmap even if using another
mechanism to track the memory dirtied by the vCPUs.
The layout of the tables in guest memory defines an ABI. The entries
are laid out in little endian format as described in the last paragraph.
KVM_DEV_ARM_ITS_RESTORE_TABLES
restore the ITS tables from guest RAM to ITS internal structures.
The GICV3 must be restored before the ITS and all ITS registers but
the GITS_CTLR must be restored before restoring the ITS tables.
The GITS_IIDR read-only register must also be restored before
calling KVM_DEV_ARM_ITS_RESTORE_TABLES as the IIDR revision field
encodes the ABI revision.
The expected ordering when restoring the GICv3/ITS is described in section
"ITS Restore Sequence".
Errors:
======= ==========================================================
-ENXIO ITS not properly configured as required prior to setting
this attribute
-ENOMEM Memory shortage when allocating ITS internal data
-EINVAL Inconsistent restored data
-EFAULT Invalid guest ram access
-EBUSY One or more VCPUS are running
-EACCES The virtual ITS is backed by a physical GICv4 ITS, and the
state is not available without GICv4.1
======= ==========================================================
KVM_DEV_ARM_VGIC_GRP_ITS_REGS
-----------------------------
Attributes:
The attr field of kvm_device_attr encodes the offset of the
ITS register, relative to the ITS control frame base address
(ITS_base).
kvm_device_attr.addr points to a __u64 value whatever the width
of the addressed register (32/64 bits). 64 bit registers can only
be accessed with full length.
Writes to read-only registers are ignored by the kernel except for:
- GITS_CREADR. It must be restored otherwise commands in the queue
will be re-executed after restoring CWRITER. GITS_CREADR must be
restored before restoring the GITS_CTLR which is likely to enable the
ITS. Also it must be restored after GITS_CBASER since a write to
GITS_CBASER resets GITS_CREADR.
- GITS_IIDR. The Revision field encodes the table layout ABI revision.
In the future we might implement direct injection of virtual LPIs.
This will require an upgrade of the table layout and an evolution of
the ABI. GITS_IIDR must be restored before calling
KVM_DEV_ARM_ITS_RESTORE_TABLES.
For other registers, getting or setting a register has the same
effect as reading/writing the register on real hardware.
Errors:
======= ====================================================
-ENXIO Offset does not correspond to any supported register
-EFAULT Invalid user pointer for attr->addr
-EINVAL Offset is not 64-bit aligned
-EBUSY one or more VCPUS are running
======= ====================================================
ITS Restore Sequence:
---------------------
The following ordering must be followed when restoring the GIC, ITS, and
KVM_IRQFD assignments:
a) restore all guest memory and create vcpus
b) restore all redistributors
c) provide the ITS base address
(KVM_DEV_ARM_VGIC_GRP_ADDR)
d) restore the ITS in the following order:
1. Restore GITS_CBASER
2. Restore all other ``GITS_`` registers, except GITS_CTLR!
3. Load the ITS table data (KVM_DEV_ARM_ITS_RESTORE_TABLES)
4. Restore GITS_CTLR
e) restore KVM_IRQFD assignments for MSIs
Then vcpus can be started.
ITS Table ABI REV0:
-------------------
Revision 0 of the ABI only supports the features of a virtual GICv3, and does
not support a virtual GICv4 with support for direct injection of virtual
interrupts for nested hypervisors.
The device table and ITT are indexed by the DeviceID and EventID,
respectively. The collection table is not indexed by CollectionID, and the
entries in the collection are listed in no particular order.
All entries are 8 bytes.
Device Table Entry (DTE)::
bits: | 63| 62 ... 49 | 48 ... 5 | 4 ... 0 |
values: | V | next | ITT_addr | Size |
where:
- V indicates whether the entry is valid. If not, other fields
are not meaningful.
- next: equals to 0 if this entry is the last one; otherwise it
corresponds to the DeviceID offset to the next DTE, capped by
2^14 -1.
- ITT_addr matches bits [51:8] of the ITT address (256 Byte aligned).
- Size specifies the supported number of bits for the EventID,
minus one
Collection Table Entry (CTE)::
bits: | 63| 62 .. 52 | 51 ... 16 | 15 ... 0 |
values: | V | RES0 | RDBase | ICID |
where:
- V indicates whether the entry is valid. If not, other fields are
not meaningful.
- RES0: reserved field with Should-Be-Zero-or-Preserved behavior.
- RDBase is the PE number (GICR_TYPER.Processor_Number semantic),
- ICID is the collection ID
Interrupt Translation Entry (ITE)::
bits: | 63 ... 48 | 47 ... 16 | 15 ... 0 |
values: | next | pINTID | ICID |
where:
- next: equals to 0 if this entry is the last one; otherwise it corresponds
to the EventID offset to the next ITE capped by 2^16 -1.
- pINTID is the physical LPI ID; if zero, it means the entry is not valid
and other fields are not meaningful.
- ICID is the collection ID
ITS Reset State:
----------------
RESET returns the ITS to the same state that it was when first created and
initialized. When the RESET command returns, the following things are
guaranteed:
- The ITS is not enabled and quiescent
GITS_CTLR.Enabled = 0 .Quiescent=1
- There is no internally cached state
- No collection or device table are used
GITS_BASER<n>.Valid = 0
- GITS_CBASER = 0, GITS_CREADR = 0, GITS_CWRITER = 0
- The ABI version is unchanged and remains the one set when the ITS
device was first created.
linux-7.2.3/Documentation/virt/kvm/devices/arm-vgic-v3.rst
+376
View File
@@ -0,0 +1,376 @@
.. SPDX-License-Identifier: GPL-2.0
==============================================================
ARM Virtual Generic Interrupt Controller v3 and later (VGICv3)
==============================================================
Device types supported:
- KVM_DEV_TYPE_ARM_VGIC_V3 ARM Generic Interrupt Controller v3.0
Only one VGIC instance may be instantiated through this API. The created VGIC
will act as the VM interrupt controller, requiring emulated user-space devices
to inject interrupts to the VGIC instead of directly to CPUs. It is not
possible to create both a GICv3 and GICv2 on the same VM.
Creating a guest GICv3 device requires a host GICv3 host, or a GICv5 host with
support for FEAT_GCIE_LEGACY.
Groups:
KVM_DEV_ARM_VGIC_GRP_ADDR
Attributes:
KVM_VGIC_V3_ADDR_TYPE_DIST (rw, 64-bit)
Base address in the guest physical address space of the GICv3 distributor
register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V3.
This address needs to be 64K aligned and the region covers 64 KByte.
KVM_VGIC_V3_ADDR_TYPE_REDIST (rw, 64-bit)
Base address in the guest physical address space of the GICv3
redistributor register mappings. There are two 64K pages for each
VCPU and all of the redistributor pages are contiguous.
Only valid for KVM_DEV_TYPE_ARM_VGIC_V3.
This address needs to be 64K aligned.
KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION (rw, 64-bit)
The attribute data pointed to by kvm_device_attr.addr is a __u64 value::
bits: | 63 .... 52 | 51 .... 16 | 15 - 12 |11 - 0
values: | count | base | flags | index
- index encodes the unique redistributor region index
- flags: reserved for future use, currently 0
- base field encodes bits [51:16] of the guest physical base address
of the first redistributor in the region.
- count encodes the number of redistributors in the region. Must be
greater than 0.
There are two 64K pages for each redistributor in the region and
redistributors are laid out contiguously within the region. Regions
are filled with redistributors in the index order. The sum of all
region count fields must be greater than or equal to the number of
VCPUs. Redistributor regions must be registered in the incremental
index order, starting from index 0.
The characteristics of a specific redistributor region can be read
by presetting the index field in the attr data.
Only valid for KVM_DEV_TYPE_ARM_VGIC_V3.
It is invalid to mix calls with KVM_VGIC_V3_ADDR_TYPE_REDIST and
KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION attributes.
Note that to obtain reproducible results (the same VCPU being associated
with the same redistributor across a save/restore operation), VCPU creation
order, redistributor region creation order as well as the respective
interleaves of VCPU and region creation MUST be preserved. Any change in
either ordering may result in a different vcpu_id/redistributor association,
resulting in a VM that will fail to run at restore time.
Errors:
======= =============================================================
-E2BIG Address outside of addressable IPA range
-EINVAL Incorrectly aligned address, bad redistributor region
count/index, mixed redistributor region attribute usage
-EEXIST Address already configured
-ENOENT Attempt to read the characteristics of a non existing
redistributor region
-ENXIO The group or attribute is unknown/unsupported for this device
or hardware support is missing.
-EFAULT Invalid user pointer for attr->addr.
-EBUSY Attempt to write a register that is read-only after
initialization
======= =============================================================
KVM_DEV_ARM_VGIC_GRP_DIST_REGS, KVM_DEV_ARM_VGIC_GRP_REDIST_REGS
Attributes:
The attr field of kvm_device_attr encodes two values::
bits: | 63 .... 32 | 31 .... 0 |
values: | mpidr | offset |
All distributor regs are (rw, 32-bit) and kvm_device_attr.addr points to a
__u32 value. 64-bit registers must be accessed by separately accessing the
lower and higher word.
Writes to read-only registers are ignored by the kernel.
KVM_DEV_ARM_VGIC_GRP_DIST_REGS accesses the main distributor registers.
KVM_DEV_ARM_VGIC_GRP_REDIST_REGS accesses the redistributor of the CPU
specified by the mpidr.
The offset is relative to the "[Re]Distributor base address" as defined
in the GICv3/4 specs. Getting or setting such a register has the same
effect as reading or writing the register on real hardware, except for the
following registers: GICD_STATUSR, GICR_STATUSR, GICD_ISPENDR,
GICR_ISPENDR0, GICD_ICPENDR, and GICR_ICPENDR0. These registers behave
differently when accessed via this interface compared to their
architecturally defined behavior to allow software a full view of the
VGIC's internal state.
The mpidr field is used to specify which
redistributor is accessed. The mpidr is ignored for the distributor.
The mpidr encoding is based on the affinity information in the
architecture defined MPIDR, and the field is encoded as follows::
| 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 |
| Aff3 | Aff2 | Aff1 | Aff0 |
Note that distributor fields are not banked, but return the same value
regardless of the mpidr used to access the register.
Userspace is allowed to write the following register fields prior to
initialization of the VGIC:
* GICD_IIDR.Revision
* GICD_TYPER2.nASSGIcap
GICD_IIDR.Revision is updated when the KVM implementation is changed in a
way directly observable by the guest or userspace. Userspace should read
GICD_IIDR from KVM and write back the read value to confirm its expected
behavior is aligned with the KVM implementation. Userspace should set
GICD_IIDR before setting any other registers to ensure the expected
behavior.
GICD_TYPER2.nASSGIcap allows userspace to control the support of SGIs
without an active state. At VGIC creation the field resets to the
maximum capability of the system. Userspace is expected to read the field
to determine the supported value(s) before writing to the field.
The GICD_STATUSR and GICR_STATUSR registers are architecturally defined such
that a write of a clear bit has no effect, whereas a write with a set bit
clears that value. To allow userspace to freely set the values of these two
registers, setting the attributes with the register offsets for these two
registers simply sets the non-reserved bits to the value written.
Accesses (reads and writes) to the GICD_ISPENDR register region and
GICR_ISPENDR0 registers get/set the value of the latched pending state for
the interrupts.
This is identical to the value returned by a guest read from ISPENDR for an
edge triggered interrupt, but may differ for level triggered interrupts.
For edge triggered interrupts, once an interrupt becomes pending (whether
because of an edge detected on the input line or because of a guest write
to ISPENDR) this state is "latched", and only cleared when either the
interrupt is activated or when the guest writes to ICPENDR. A level
triggered interrupt may be pending either because the level input is held
high by a device, or because of a guest write to the ISPENDR register. Only
ISPENDR writes are latched; if the device lowers the line level then the
interrupt is no longer pending unless the guest also wrote to ISPENDR, and
conversely writes to ICPENDR or activations of the interrupt do not clear
the pending status if the line level is still being held high. (These
rules are documented in the GICv3 specification descriptions of the ICPENDR
and ISPENDR registers.) For a level triggered interrupt the value accessed
here is that of the latch which is set by ISPENDR and cleared by ICPENDR or
interrupt activation, whereas the value returned by a guest read from
ISPENDR is the logical OR of the latch value and the input line level.
Raw access to the latch state is provided to userspace so that it can save
and restore the entire GIC internal state (which is defined by the
combination of the current input line level and the latch state, and cannot
be deduced from purely the line level and the value of the ISPENDR
registers).
Accesses to GICD_ICPENDR register region and GICR_ICPENDR0 registers have
RAZ/WI semantics, meaning that reads always return 0 and writes are always
ignored.
Errors:
====== =====================================================
-ENXIO Getting or setting this register is not yet supported
-EBUSY One or more VCPUs are running
====== =====================================================
KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS
Attributes:
The attr field of kvm_device_attr encodes two values::
bits: | 63 .... 32 | 31 .... 16 | 15 .... 0 |
values: | mpidr | RES | instr |
The mpidr field encodes the CPU ID based on the affinity information in the
architecture defined MPIDR, and the field is encoded as follows::
| 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 |
| Aff3 | Aff2 | Aff1 | Aff0 |
The instr field encodes the system register to access based on the fields
defined in the A64 instruction set encoding for system register access
(RES means the bits are reserved for future use and should be zero)::
| 15 ... 14 | 13 ... 11 | 10 ... 7 | 6 ... 3 | 2 ... 0 |
| Op 0 | Op1 | CRn | CRm | Op2 |
All system regs accessed through this API are (rw, 64-bit) and
kvm_device_attr.addr points to a __u64 value.
KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS accesses the CPU interface registers for the
CPU specified by the mpidr field.
The available registers are:
=============== ====================================================
ICC_PMR_EL1
ICC_BPR0_EL1
ICC_AP0R0_EL1
ICC_AP0R1_EL1 when the host implements at least 6 bits of priority
ICC_AP0R2_EL1 when the host implements 7 bits of priority
ICC_AP0R3_EL1 when the host implements 7 bits of priority
ICC_AP1R0_EL1
ICC_AP1R1_EL1 when the host implements at least 6 bits of priority
ICC_AP1R2_EL1 when the host implements 7 bits of priority
ICC_AP1R3_EL1 when the host implements 7 bits of priority
ICC_BPR1_EL1
ICC_CTLR_EL1
ICC_SRE_EL1
ICC_IGRPEN0_EL1
ICC_IGRPEN1_EL1
=============== ====================================================
When EL2 is available for the guest, these registers are also available:
============= ====================================================
ICH_AP0R0_EL2
ICH_AP0R1_EL2 when the host implements at least 6 bits of priority
ICH_AP0R2_EL2 when the host implements 7 bits of priority
ICH_AP0R3_EL2 when the host implements 7 bits of priority
ICH_AP1R0_EL2
ICH_AP1R1_EL2 when the host implements at least 6 bits of priority
ICH_AP1R2_EL2 when the host implements 7 bits of priority
ICH_AP1R3_EL2 when the host implements 7 bits of priority
ICH_HCR_EL2
ICC_SRE_EL2
ICH_VTR_EL2
ICH_VMCR_EL2
ICH_LR0_EL2
ICH_LR1_EL2
ICH_LR2_EL2
ICH_LR3_EL2
ICH_LR4_EL2
ICH_LR5_EL2
ICH_LR6_EL2
ICH_LR7_EL2
ICH_LR8_EL2
ICH_LR9_EL2
ICH_LR10_EL2
ICH_LR11_EL2
ICH_LR12_EL2
ICH_LR13_EL2
ICH_LR14_EL2
ICH_LR15_EL2
============= ====================================================
CPU interface registers are only described using the AArch64
encoding.
Errors:
======= =================================================
-ENXIO Getting or setting this register is not supported
-EBUSY VCPU is running
-EINVAL Invalid mpidr or register value supplied
======= =================================================
KVM_DEV_ARM_VGIC_GRP_NR_IRQS
Attributes:
A value describing the number of interrupts (SGI, PPI and SPI) for
this GIC instance, ranging from 64 to 1024, in increments of 32.
kvm_device_attr.addr points to a __u32 value.
Errors:
======= ======================================
-EINVAL Value set is out of the expected range
-EBUSY Value has already be set.
======= ======================================
KVM_DEV_ARM_VGIC_GRP_CTRL
Attributes:
KVM_DEV_ARM_VGIC_CTRL_INIT
request the initialization of the VGIC, no additional parameter in
kvm_device_attr.addr. Must be called after all VCPUs have been created.
KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES
save all LPI pending bits into guest RAM pending tables.
The first kB of the pending table is not altered by this operation.
Errors:
======= ========================================================
-ENXIO VGIC not properly configured as required prior to calling
this attribute
-ENODEV no online VCPU
-ENOMEM memory shortage when allocating vgic internal data
-EFAULT Invalid guest ram access
-EBUSY One or more VCPUS are running
======= ========================================================
KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO
Attributes:
The attr field of kvm_device_attr encodes the following values::
bits: | 63 .... 32 | 31 .... 10 | 9 .... 0 |
values: | mpidr | info | vINTID |
The vINTID specifies which set of IRQs is reported on.
The info field specifies which information userspace wants to get or set
using this interface. Currently we support the following info values:
VGIC_LEVEL_INFO_LINE_LEVEL:
Get/Set the input level of the IRQ line for a set of 32 contiguously
numbered interrupts.
vINTID must be a multiple of 32.
kvm_device_attr.addr points to a __u32 value which will contain a
bitmap where a set bit means the interrupt level is asserted.
Bit[n] indicates the status for interrupt vINTID + n.
SGIs and any interrupt with a higher ID than the number of interrupts
supported, will be RAZ/WI. LPIs are always edge-triggered and are
therefore not supported by this interface.
PPIs are reported per VCPU as specified in the mpidr field, and SPIs are
reported with the same value regardless of the mpidr specified.
The mpidr field encodes the CPU ID based on the affinity information in the
architecture defined MPIDR, and the field is encoded as follows::
| 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 |
| Aff3 | Aff2 | Aff1 | Aff0 |
Errors:
======= =============================================
-EINVAL vINTID is not multiple of 32 or info field is
not VGIC_LEVEL_INFO_LINE_LEVEL
======= =============================================
KVM_DEV_ARM_VGIC_GRP_MAINT_IRQ
Attributes:
The attr field of kvm_device_attr encodes the following values:
bits: | 31 .... 5 | 4 .... 0 |
values: | RES0 | vINTID |
The vINTID specifies which interrupt is generated when the vGIC
must generate a maintenance interrupt. This must be a PPI.
linux-7.2.3/Documentation/virt/kvm/devices/arm-vgic-v5.rst
+50
View File
@@ -0,0 +1,50 @@
.. SPDX-License-Identifier: GPL-2.0
====================================================
ARM Virtual Generic Interrupt Controller v5 (VGICv5)
====================================================
Device types supported:
- KVM_DEV_TYPE_ARM_VGIC_V5 ARM Generic Interrupt Controller v5.0
Only one VGIC instance may be instantiated through this API. The created VGIC
will act as the VM interrupt controller, requiring emulated user-space devices
to inject interrupts to the VGIC instead of directly to CPUs.
Creating a guest GICv5 device requires a GICv5 host. The current VGICv5 device
only supports PPI interrupts. These can either be injected from emulated
in-kernel devices (such as the Arch Timer, or PMU), or via the KVM_IRQ_LINE
ioctl.
Groups:
KVM_DEV_ARM_VGIC_GRP_CTRL
Attributes:
KVM_DEV_ARM_VGIC_CTRL_INIT
request the initialization of the VGIC, no additional parameter in
kvm_device_attr.addr. Must be called after all VCPUs have been created.
KVM_DEV_ARM_VGIC_USERSPACE_PPIS
request the mask of userspace-drivable PPIs. Only a subset of the PPIs can
be directly driven from userspace with GICv5, and the returned mask
informs userspace of which it is allowed to drive via KVM_IRQ_LINE.
Userspace must allocate and point to __u64[2] of data in
kvm_device_attr.addr. When this call returns, the provided memory will be
populated with the userspace PPI mask. The lower __u64 contains the mask
for the lower 64 PPIS, with the remaining 64 being in the second __u64.
This is a read-only attribute, and cannot be set. Attempts to set it are
rejected.
Errors:
======= ========================================================
-ENXIO VGIC not properly configured as required prior to calling
this attribute
-ENODEV no online VCPU
-ENOMEM memory shortage when allocating vgic internal data
-EFAULT Invalid guest ram access
-EBUSY One or more VCPUS are running
======= ========================================================
linux-7.2.3/Documentation/virt/kvm/devices/arm-vgic.rst
+156
View File
@@ -0,0 +1,156 @@
.. SPDX-License-Identifier: GPL-2.0
==================================================
ARM Virtual Generic Interrupt Controller v2 (VGIC)
==================================================
Device types supported:
- KVM_DEV_TYPE_ARM_VGIC_V2 ARM Generic Interrupt Controller v2.0
Only one VGIC instance may be instantiated through either this API or the
legacy KVM_CREATE_IRQCHIP API. The created VGIC will act as the VM interrupt
controller, requiring emulated user-space devices to inject interrupts to the
VGIC instead of directly to CPUs.
GICv3 implementations with hardware compatibility support allow creating a
guest GICv2 through this interface. For information on creating a guest GICv3
device and guest ITS devices, see arm-vgic-v3.txt. It is not possible to
create both a GICv3 and GICv2 device on the same VM.
Groups:
KVM_DEV_ARM_VGIC_GRP_ADDR
Attributes:
KVM_VGIC_V2_ADDR_TYPE_DIST (rw, 64-bit)
Base address in the guest physical address space of the GIC distributor
register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V2.
This address needs to be 4K aligned and the region covers 4 KByte.
KVM_VGIC_V2_ADDR_TYPE_CPU (rw, 64-bit)
Base address in the guest physical address space of the GIC virtual cpu
interface register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V2.
This address needs to be 4K aligned and the region covers 8 KByte.
Errors:
======= =============================================================
-E2BIG Address outside of addressable IPA range
-EINVAL Incorrectly aligned address
-EEXIST Address already configured
-ENXIO The group or attribute is unknown/unsupported for this device
or hardware support is missing.
-EFAULT Invalid user pointer for attr->addr.
======= =============================================================
KVM_DEV_ARM_VGIC_GRP_DIST_REGS
Attributes:
The attr field of kvm_device_attr encodes two values::
bits: | 63 .... 40 | 39 .. 32 | 31 .... 0 |
values: | reserved | vcpu_index | offset |
All distributor regs are (rw, 32-bit)
The offset is relative to the "Distributor base address" as defined in the
GICv2 specs. Getting or setting such a register has the same effect as
reading or writing the register on the actual hardware from the cpu whose
index is specified with the vcpu_index field. Note that most distributor
fields are not banked, but return the same value regardless of the
vcpu_index used to access the register.
GICD_IIDR.Revision is updated when the KVM implementation of an emulated
GICv2 is changed in a way directly observable by the guest or userspace.
Userspace should read GICD_IIDR from KVM and write back the read value to
confirm its expected behavior is aligned with the KVM implementation.
Userspace should set GICD_IIDR before setting any other registers (both
KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_CPU_REGS) to ensure
the expected behavior. Unless GICD_IIDR has been set from userspace, writes
to the interrupt group registers (GICD_IGROUPR) are ignored.
Errors:
======= =====================================================
-ENXIO Getting or setting this register is not yet supported
-EBUSY One or more VCPUs are running
-EINVAL Invalid vcpu_index supplied
======= =====================================================
KVM_DEV_ARM_VGIC_GRP_CPU_REGS
Attributes:
The attr field of kvm_device_attr encodes two values::
bits: | 63 .... 40 | 39 .. 32 | 31 .... 0 |
values: | reserved | vcpu_index | offset |
All CPU interface regs are (rw, 32-bit)
The offset specifies the offset from the "CPU interface base address" as
defined in the GICv2 specs. Getting or setting such a register has the
same effect as reading or writing the register on the actual hardware.
The Active Priorities Registers APRn are implementation defined, so we set a
fixed format for our implementation that fits with the model of a "GICv2
implementation without the security extensions" which we present to the
guest. This interface always exposes four register APR[0-3] describing the
maximum possible 128 preemption levels. The semantics of the register
indicate if any interrupts in a given preemption level are in the active
state by setting the corresponding bit.
Thus, preemption level X has one or more active interrupts if and only if:
APRn[X mod 32] == 0b1, where n = X / 32
Bits for undefined preemption levels are RAZ/WI.
Note that this differs from a CPU's view of the APRs on hardware in which
a GIC without the security extensions expose group 0 and group 1 active
priorities in separate register groups, whereas we show a combined view
similar to GICv2's GICH_APR.
For historical reasons and to provide ABI compatibility with userspace we
export the GICC_PMR register in the format of the GICH_VMCR.VMPriMask
field in the lower 5 bits of a word, meaning that userspace must always
use the lower 5 bits to communicate with the KVM device and must shift the
value left by 3 places to obtain the actual priority mask level.
Errors:
======= =====================================================
-ENXIO Getting or setting this register is not yet supported
-EBUSY One or more VCPUs are running
-EINVAL Invalid vcpu_index supplied
======= =====================================================
KVM_DEV_ARM_VGIC_GRP_NR_IRQS
Attributes:
A value describing the number of interrupts (SGI, PPI and SPI) for
this GIC instance, ranging from 64 to 1024, in increments of 32.
Errors:
======= =============================================================
-EINVAL Value set is out of the expected range
-EBUSY Value has already be set, or GIC has already been initialized
with default values.
======= =============================================================
KVM_DEV_ARM_VGIC_GRP_CTRL
Attributes:
KVM_DEV_ARM_VGIC_CTRL_INIT
request the initialization of the VGIC or ITS, no additional parameter
in kvm_device_attr.addr.
Errors:
======= =========================================================
-ENXIO VGIC not properly configured as required prior to calling
this attribute
-ENODEV no online VCPU
-ENOMEM memory shortage when allocating vgic internal data
======= =========================================================
linux-7.2.3/Documentation/virt/kvm/devices/index.rst
+20
View File
@@ -0,0 +1,20 @@
.. SPDX-License-Identifier: GPL-2.0
=======
Devices
=======
.. toctree::
:maxdepth: 2
arm-vgic-its
arm-vgic
arm-vgic-v3
arm-vgic-v5
mpic
s390_flic
vcpu
vfio
vm
xics
xive
linux-7.2.3/Documentation/virt/kvm/devices/mpic.rst
+58
View File
@@ -0,0 +1,58 @@
.. SPDX-License-Identifier: GPL-2.0
=========================
MPIC interrupt controller
=========================
Device types supported:
- KVM_DEV_TYPE_FSL_MPIC_20 Freescale MPIC v2.0
- KVM_DEV_TYPE_FSL_MPIC_42 Freescale MPIC v4.2
Only one MPIC instance, of any type, may be instantiated. The created
MPIC will act as the system interrupt controller, connecting to each
vcpu's interrupt inputs.
Groups:
KVM_DEV_MPIC_GRP_MISC
Attributes:
KVM_DEV_MPIC_BASE_ADDR (rw, 64-bit)
Base address of the 256 KiB MPIC register space. Must be
naturally aligned. A value of zero disables the mapping.
Reset value is zero.
KVM_DEV_MPIC_GRP_REGISTER (rw, 32-bit)
Access an MPIC register, as if the access were made from the guest.
"attr" is the byte offset into the MPIC register space. Accesses
must be 4-byte aligned.
MSIs may be signaled by using this attribute group to write
to the relevant MSIIR.
KVM_DEV_MPIC_GRP_IRQ_ACTIVE (rw, 32-bit)
IRQ input line for each standard openpic source. 0 is inactive and 1
is active, regardless of interrupt sense.
For edge-triggered interrupts: Writing 1 is considered an activating
edge, and writing 0 is ignored. Reading returns 1 if a previously
signaled edge has not been acknowledged, and 0 otherwise.
"attr" is the IRQ number. IRQ numbers for standard sources are the
byte offset of the relevant IVPR from EIVPR0, divided by 32.
IRQ Routing:
The MPIC emulation supports IRQ routing. Only a single MPIC device can
be instantiated. Once that device has been created, it's available as
irqchip id 0.
This irqchip 0 has 256 interrupt pins, which expose the interrupts in
the main array of interrupt sources (a.k.a. "SRC" interrupts).
The numbering is the same as the MPIC device tree binding -- based on
the register offset from the beginning of the sources array, without
regard to any subdivisions in chip documentation such as "internal"
or "external" interrupts.
Access to non-SRC interrupts is not implemented through IRQ routing mechanisms.
linux-7.2.3/Documentation/virt/kvm/devices/s390_flic.rst
+181
View File
@@ -0,0 +1,181 @@
.. SPDX-License-Identifier: GPL-2.0
====================================
FLIC (floating interrupt controller)
====================================
FLIC handles floating (non per-cpu) interrupts, i.e. I/O, service and some
machine check interruptions. All interrupts are stored in a per-vm list of
pending interrupts. FLIC performs operations on this list.
Only one FLIC instance may be instantiated.
FLIC provides support to
- add interrupts (KVM_DEV_FLIC_ENQUEUE)
- inspect currently pending interrupts (KVM_FLIC_GET_ALL_IRQS)
- purge all pending floating interrupts (KVM_DEV_FLIC_CLEAR_IRQS)
- purge one pending floating I/O interrupt (KVM_DEV_FLIC_CLEAR_IO_IRQ)
- enable/disable for the guest transparent async page faults
- register and modify adapter interrupt sources (KVM_DEV_FLIC_ADAPTER_*)
- modify AIS (adapter-interruption-suppression) mode state (KVM_DEV_FLIC_AISM)
- inject adapter interrupts on a specified adapter (KVM_DEV_FLIC_AIRQ_INJECT)
- get/set all AIS mode states (KVM_DEV_FLIC_AISM_ALL)
Groups:
KVM_DEV_FLIC_ENQUEUE
Passes a buffer and length into the kernel which are then injected into
the list of pending interrupts.
attr->addr contains the pointer to the buffer and attr->attr contains
the length of the buffer.
The format of the data structure kvm_s390_irq as it is copied from userspace
is defined in usr/include/linux/kvm.h.
KVM_DEV_FLIC_GET_ALL_IRQS
Copies all floating interrupts into a buffer provided by userspace.
When the buffer is too small it returns -ENOMEM, which is the indication
for userspace to try again with a bigger buffer.
-ENOBUFS is returned when the allocation of a kernelspace buffer has
failed.
-EFAULT is returned when copying data to userspace failed.
All interrupts remain pending, i.e. are not deleted from the list of
currently pending interrupts.
attr->addr contains the userspace address of the buffer into which all
interrupt data will be copied.
attr->attr contains the size of the buffer in bytes.
KVM_DEV_FLIC_CLEAR_IRQS
Simply deletes all elements from the list of currently pending floating
interrupts. No interrupts are injected into the guest.
KVM_DEV_FLIC_CLEAR_IO_IRQ
Deletes one (if any) I/O interrupt for a subchannel identified by the
subsystem identification word passed via the buffer specified by
attr->addr (address) and attr->attr (length).
KVM_DEV_FLIC_APF_ENABLE
Enables async page faults for the guest. So in case of a major page fault
the host is allowed to handle this async and continues the guest.
-EINVAL is returned when called on the FLIC of a ucontrol VM.
KVM_DEV_FLIC_APF_DISABLE_WAIT
Disables async page faults for the guest and waits until already pending
async page faults are done. This is necessary to trigger a completion interrupt
for every init interrupt before migrating the interrupt list.
-EINVAL is returned when called on the FLIC of a ucontrol VM.
KVM_DEV_FLIC_ADAPTER_REGISTER
Register an I/O adapter interrupt source. Takes a kvm_s390_io_adapter
describing the adapter to register::
struct kvm_s390_io_adapter {
__u32 id;
__u8 isc;
__u8 maskable;
__u8 swap;
__u8 flags;
};
id contains the unique id for the adapter, isc the I/O interruption subclass
to use, maskable whether this adapter may be masked (interrupts turned off),
swap whether the indicators need to be byte swapped, and flags contains
further characteristics of the adapter.
Currently defined values for 'flags' are:
- KVM_S390_ADAPTER_SUPPRESSIBLE: adapter is subject to AIS
(adapter-interrupt-suppression) facility. This flag only has an effect if
the AIS capability is enabled.
Unknown flag values are ignored.
KVM_DEV_FLIC_ADAPTER_MODIFY
Modifies attributes of an existing I/O adapter interrupt source. Takes
a kvm_s390_io_adapter_req specifying the adapter and the operation::
struct kvm_s390_io_adapter_req {
__u32 id;
__u8 type;
__u8 mask;
__u16 pad0;
__u64 addr;
};
id specifies the adapter and type the operation. The supported operations
are:
KVM_S390_IO_ADAPTER_MASK
mask or unmask the adapter, as specified in mask
KVM_S390_IO_ADAPTER_MAP
Map an adapter indicator or summary page for long-term pinning so that
interrupt injection can be performed in atomic context. If long-term
pinning is not possible (e.g. file-backed memory), the page is verified
via a short-term pin and the ioctl returns success; interrupt injection
will use the non-atomic irqfd path with short-term pinning on each
interrupt. In Secure Execution mode this is a no-op and the ioctl
returns success.
KVM_S390_IO_ADAPTER_UNMAP
Unmap a previously mapped adapter indicator or summary page and release
the long-term pin. If the page was not long-term pinned (e.g. file-backed
memory), the map entry is removed and success is returned; if no prior
map entry exists, -ENOENT is returned. In Secure Execution mode this is
a no-op and the ioctl returns success.
KVM_DEV_FLIC_AISM
modify the adapter-interruption-suppression mode for a given isc if the
AIS capability is enabled. Takes a kvm_s390_ais_req describing::
struct kvm_s390_ais_req {
__u8 isc;
__u16 mode;
};
isc contains the target I/O interruption subclass, mode the target
adapter-interruption-suppression mode. The following modes are
currently supported:
- KVM_S390_AIS_MODE_ALL: ALL-Interruptions Mode, i.e. airq injection
is always allowed;
- KVM_S390_AIS_MODE_SINGLE: SINGLE-Interruption Mode, i.e. airq
injection is only allowed once and the following adapter interrupts
will be suppressed until the mode is set again to ALL-Interruptions
or SINGLE-Interruption mode.
KVM_DEV_FLIC_AIRQ_INJECT
Inject adapter interrupts on a specified adapter.
attr->attr contains the unique id for the adapter, which allows for
adapter-specific checks and actions.
For adapters subject to AIS, handle the airq injection suppression for
an isc according to the adapter-interruption-suppression mode on condition
that the AIS capability is enabled.
KVM_DEV_FLIC_AISM_ALL
Gets or sets the adapter-interruption-suppression mode for all ISCs. Takes
a kvm_s390_ais_all describing::
struct kvm_s390_ais_all {
__u8 simm; /* Single-Interruption-Mode mask */
__u8 nimm; /* No-Interruption-Mode mask *
};
simm contains Single-Interruption-Mode mask for all ISCs, nimm contains
No-Interruption-Mode mask for all ISCs. Each bit in simm and nimm corresponds
to an ISC (MSB0 bit 0 to ISC 0 and so on). The combination of simm bit and
nimm bit presents AIS mode for a ISC.
KVM_DEV_FLIC_AISM_ALL is indicated by KVM_CAP_S390_AIS_MIGRATION.
Note: The KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR device ioctls executed on
FLIC with an unknown group or attribute gives the error code EINVAL (instead of
ENXIO, as specified in the API documentation). It is not possible to conclude
that a FLIC operation is unavailable based on the error code resulting from a
usage attempt.
.. note:: The KVM_DEV_FLIC_CLEAR_IO_IRQ ioctl will return EINVAL in case a
zero schid is specified.
linux-7.2.3/Documentation/virt/kvm/devices/vcpu.rst
+297
View File
@@ -0,0 +1,297 @@
.. SPDX-License-Identifier: GPL-2.0
======================
Generic vcpu interface
======================
The virtual cpu "device" also accepts the ioctls KVM_SET_DEVICE_ATTR,
KVM_GET_DEVICE_ATTR, and KVM_HAS_DEVICE_ATTR. The interface uses the same struct
kvm_device_attr as other devices, but targets VCPU-wide settings and controls.
The groups and attributes per virtual cpu, if any, are architecture specific.
1. GROUP: KVM_ARM_VCPU_PMU_V3_CTRL
==================================
:Architectures: ARM64
1.1. ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_IRQ
---------------------------------------
:Parameters: in kvm_device_attr.addr the address for PMU overflow interrupt is a
pointer to an int
Returns:
======= ========================================================
-EBUSY The PMU overflow interrupt is already set
-EFAULT Error reading interrupt number
-ENXIO PMUv3 not supported or the overflow interrupt not set
when attempting to get it
-ENODEV KVM_ARM_VCPU_PMU_V3 feature missing from VCPU
-EINVAL Invalid PMU overflow interrupt number supplied or
trying to set the IRQ number without using an in-kernel
irqchip.
======= ========================================================
A value describing the PMUv3 (Performance Monitor Unit v3) overflow interrupt
number for this vcpu. This interrupt could be a PPI or SPI, but the interrupt
type must be same for each vcpu. As a PPI, the interrupt number is the same for
all vcpus, while as an SPI it must be a separate number per vcpu.
For GICv5-based guests, the architected PPI (23) must be used, and must be
communicated as the full GICv5-style Interrupt ID, i.e., 0x20000017. This ioctl
can be omitted altogether for a GICv5-based guest.
1.2 ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_INIT
---------------------------------------
:Parameters: no additional parameter in kvm_device_attr.addr
Returns:
======= ======================================================
-EEXIST Interrupt number already used
-ENODEV PMUv3 not supported or GIC not initialized
-ENXIO PMUv3 not supported, missing VCPU feature or interrupt
number not set (non-GICv5 guests, only)
-EBUSY PMUv3 already initialized
======= ======================================================
Request the initialization of the PMUv3. If using the PMUv3 with an in-kernel
virtual GIC implementation, this must be done after initializing the in-kernel
irqchip.
1.3 ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_FILTER
-----------------------------------------
:Parameters: in kvm_device_attr.addr the address for a PMU event filter is a
pointer to a struct kvm_pmu_event_filter
:Returns:
======= ======================================================
-ENODEV PMUv3 not supported or GIC not initialized
-ENXIO PMUv3 not properly configured or in-kernel irqchip not
configured as required prior to calling this attribute
-EBUSY PMUv3 already initialized or a VCPU has already run
-EINVAL Invalid filter range
======= ======================================================
Request the installation of a PMU event filter described as follows::
struct kvm_pmu_event_filter {
__u16 base_event;
__u16 nevents;
#define KVM_PMU_EVENT_ALLOW 0
#define KVM_PMU_EVENT_DENY 1
__u8 action;
__u8 pad[3];
};
A filter range is defined as the range [@base_event, @base_event + @nevents),
together with an @action (KVM_PMU_EVENT_ALLOW or KVM_PMU_EVENT_DENY). The
first registered range defines the global policy (global ALLOW if the first
@action is DENY, global DENY if the first @action is ALLOW). Multiple ranges
can be programmed, and must fit within the event space defined by the PMU
architecture (10 bits on ARMv8.0, 16 bits from ARMv8.1 onwards).
Note: "Cancelling" a filter by registering the opposite action for the same
range doesn't change the default action. For example, installing an ALLOW
filter for event range [0:10) as the first filter and then applying a DENY
action for the same range will leave the whole range as disabled.
Restrictions: Event 0 (SW_INCR) is never filtered, as it doesn't count a
hardware event. Filtering event 0x1E (CHAIN) has no effect either, as it
isn't strictly speaking an event. Filtering the cycle counter is possible
using event 0x11 (CPU_CYCLES).
1.4 ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_SET_PMU
------------------------------------------
:Parameters: in kvm_device_attr.addr the address to an int representing the PMU
identifier.
:Returns:
======= ====================================================
-EBUSY PMUv3 already initialized, a VCPU has already run or
an event filter has already been set
-EFAULT Error accessing the PMU identifier
-ENXIO PMU not found
-ENODEV PMUv3 not supported or GIC not initialized
-ENOMEM Could not allocate memory
======= ====================================================
Request that the VCPU uses the specified hardware PMU when creating guest events
for the purpose of PMU emulation. The PMU identifier can be read from the "type"
file for the desired PMU instance under /sys/devices (or, equivalent,
/sys/bus/even_source). This attribute is particularly useful on heterogeneous
systems where there are at least two CPU PMUs on the system. The PMU that is set
for one VCPU will be used by all the other VCPUs. It isn't possible to set a PMU
if a PMU event filter is already present.
Note that KVM will not make any attempts to run the VCPU on the physical CPUs
associated with the PMU specified by this attribute. This is entirely left to
userspace. However, attempting to run the VCPU on a physical CPU not supported
by the PMU will fail and KVM_RUN will return with
exit_reason = KVM_EXIT_FAIL_ENTRY and populate the fail_entry struct by setting
hardare_entry_failure_reason field to KVM_EXIT_FAIL_ENTRY_CPU_UNSUPPORTED and
the cpu field to the processor id.
1.5 ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_SET_NR_COUNTERS
--------------------------------------------------
:Parameters: in kvm_device_attr.addr the address to an unsigned int
representing the maximum value taken by PMCR_EL0.N
:Returns:
======= ====================================================
-EBUSY PMUv3 already initialized, a VCPU has already run or
an event filter has already been set
-EFAULT Error accessing the value pointed to by addr
-ENODEV PMUv3 not supported or GIC not initialized
-EINVAL No PMUv3 explicitly selected, or value of N out of
range
======= ====================================================
Set the number of implemented event counters in the virtual PMU. This
mandates that a PMU has explicitly been selected via
KVM_ARM_VCPU_PMU_V3_SET_PMU, and will fail when no PMU has been
explicitly selected, or the number of counters is out of range for the
selected PMU. Selecting a new PMU cancels the effect of setting this
attribute.
2. GROUP: KVM_ARM_VCPU_TIMER_CTRL
=================================
:Architectures: ARM64
2.1. ATTRIBUTES: KVM_ARM_VCPU_TIMER_IRQ_{VTIMER,PTIMER,HVTIMER,HPTIMER}
-----------------------------------------------------------------------
:Parameters: in kvm_device_attr.addr the address for the timer interrupt is a
pointer to an int
Returns:
======= =================================
-EINVAL Invalid timer interrupt number
-EBUSY One or more VCPUs has already run
======= =================================
A value describing the architected timer interrupt number when connected to an
in-kernel virtual GIC. These must be a PPI (16 <= intid < 32). Setting the
attribute overrides the default values (see below).
============================== ==========================================
KVM_ARM_VCPU_TIMER_IRQ_VTIMER The EL1 virtual timer intid (default: 27)
KVM_ARM_VCPU_TIMER_IRQ_PTIMER The EL1 physical timer intid (default: 30)
KVM_ARM_VCPU_TIMER_IRQ_HVTIMER The EL2 virtual timer intid (default: 28)
KVM_ARM_VCPU_TIMER_IRQ_HPTIMER The EL2 physical timer intid (default: 26)
============================== ==========================================
Setting the same PPI for different timers will prevent the VCPUs from running.
Setting the interrupt number on a VCPU configures all VCPUs created at that
time to use the number provided for a given timer, overwriting any previously
configured values on other VCPUs. Userspace should configure the interrupt
numbers on at least one VCPU after creating all VCPUs and before running any
VCPUs.
.. _kvm_arm_vcpu_pvtime_ctrl:
3. GROUP: KVM_ARM_VCPU_PVTIME_CTRL
==================================
:Architectures: ARM64
3.1 ATTRIBUTE: KVM_ARM_VCPU_PVTIME_IPA
--------------------------------------
:Parameters: 64-bit base address
Returns:
======= ======================================
-ENXIO Stolen time not implemented
-EEXIST Base address already set for this VCPU
-EINVAL Base address not 64 byte aligned
======= ======================================
Specifies the base address of the stolen time structure for this VCPU. The
base address must be 64 byte aligned and exist within a valid guest memory
region. See Documentation/virt/kvm/arm/pvtime.rst for more information
including the layout of the stolen time structure.
4. GROUP: KVM_VCPU_TSC_CTRL
===========================
:Architectures: x86
4.1 ATTRIBUTE: KVM_VCPU_TSC_OFFSET
:Parameters: 64-bit unsigned TSC offset
Returns:
======= ======================================
-EFAULT Error reading/writing the provided
parameter address.
-ENXIO Attribute not supported
======= ======================================
Specifies the guest's TSC offset relative to the host's TSC. The guest's
TSC is then derived by the following equation:
guest_tsc = host_tsc + KVM_VCPU_TSC_OFFSET
This attribute is useful to adjust the guest's TSC on live migration,
so that the TSC counts the time during which the VM was paused. The
following describes a possible algorithm to use for this purpose.
From the source VMM process:
1. Invoke the KVM_GET_CLOCK ioctl to record the host TSC (tsc_src),
kvmclock nanoseconds (guest_src), and host CLOCK_REALTIME nanoseconds
(host_src).
2. Read the KVM_VCPU_TSC_OFFSET attribute for every vCPU to record the
guest TSC offset (ofs_src[i]).
3. Invoke the KVM_GET_TSC_KHZ ioctl to record the frequency of the
guest's TSC (freq).
From the destination VMM process:
4. Invoke the KVM_SET_CLOCK ioctl, providing the source nanoseconds from
kvmclock (guest_src) and CLOCK_REALTIME (host_src) in their respective
fields. Ensure that the KVM_CLOCK_REALTIME flag is set in the provided
structure.
KVM will advance the VM's kvmclock to account for elapsed time since
recording the clock values. Note that this will cause problems in
the guest (e.g., timeouts) unless CLOCK_REALTIME is synchronized
between the source and destination, and a reasonably short time passes
between the source pausing the VMs and the destination executing
steps 4-7.
5. Invoke the KVM_GET_CLOCK ioctl to record the host TSC (tsc_dest) and
kvmclock nanoseconds (guest_dest).
6. Adjust the guest TSC offsets for every vCPU to account for (1) time
elapsed since recording state and (2) difference in TSCs between the
source and destination machine:
ofs_dst[i] = ofs_src[i] -
(guest_src - guest_dest) * freq +
(tsc_src - tsc_dest)
("ofs[i] + tsc - guest * freq" is the guest TSC value corresponding to
a time of 0 in kvmclock. The above formula ensures that it is the
same on the destination as it was on the source).
7. Write the KVM_VCPU_TSC_OFFSET attribute for every vCPU with the
respective value derived in the previous step.
linux-7.2.3/Documentation/virt/kvm/devices/vfio.rst
+61
View File
@@ -0,0 +1,61 @@
.. SPDX-License-Identifier: GPL-2.0
===================
VFIO virtual device
===================
Device types supported:
- KVM_DEV_TYPE_VFIO
Only one VFIO instance may be created per VM. The created device
tracks VFIO files (group or device) in use by the VM and features
of those groups/devices important to the correctness and acceleration
of the VM. As groups/devices are enabled and disabled for use by the
VM, KVM should be updated about their presence. When registered with
KVM, a reference to the VFIO file is held by KVM.
Groups:
KVM_DEV_VFIO_FILE
alias: KVM_DEV_VFIO_GROUP
KVM_DEV_VFIO_FILE attributes:
KVM_DEV_VFIO_FILE_ADD: Add a VFIO file (group/device) to VFIO-KVM device
tracking
kvm_device_attr.addr points to an int32_t file descriptor for the
VFIO file.
KVM_DEV_VFIO_FILE_DEL: Remove a VFIO file (group/device) from VFIO-KVM
device tracking
kvm_device_attr.addr points to an int32_t file descriptor for the
VFIO file.
KVM_DEV_VFIO_GROUP (legacy kvm device group restricted to the handling of VFIO group fd):
KVM_DEV_VFIO_GROUP_ADD: same as KVM_DEV_VFIO_FILE_ADD for group fd only
KVM_DEV_VFIO_GROUP_DEL: same as KVM_DEV_VFIO_FILE_DEL for group fd only
KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE: attaches a guest visible TCE table
allocated by sPAPR KVM.
kvm_device_attr.addr points to a struct::
struct kvm_vfio_spapr_tce {
__s32 groupfd;
__s32 tablefd;
};
where:
- @groupfd is a file descriptor for a VFIO group;
- @tablefd is a file descriptor for a TCE table allocated via
KVM_CREATE_SPAPR_TCE.
The FILE/GROUP_ADD operation above should be invoked prior to accessing the
device file descriptor via VFIO_GROUP_GET_DEVICE_FD in order to support
drivers which require a kvm pointer to be set in their .open_device()
callback. It is the same for device file descriptor via character device
open which gets device access via VFIO_DEVICE_BIND_IOMMUFD. For such file
descriptors, FILE_ADD should be invoked before VFIO_DEVICE_BIND_IOMMUFD
to support the drivers mentioned in prior sentence as well.
linux-7.2.3/Documentation/virt/kvm/devices/vm.rst
+402
View File
@@ -0,0 +1,402 @@
.. SPDX-License-Identifier: GPL-2.0
====================
Generic vm interface
====================
The virtual machine "device" also accepts the ioctls KVM_SET_DEVICE_ATTR,
KVM_GET_DEVICE_ATTR, and KVM_HAS_DEVICE_ATTR. The interface uses the same
struct kvm_device_attr as other devices, but targets VM-wide settings
and controls.
The groups and attributes per virtual machine, if any, are architecture
specific.
1. GROUP: KVM_S390_VM_MEM_CTRL
==============================
:Architectures: s390
1.1. ATTRIBUTE: KVM_S390_VM_MEM_ENABLE_CMMA
-------------------------------------------
:Parameters: none
:Returns: -EBUSY if a vcpu is already defined, otherwise 0
Enables Collaborative Memory Management Assist (CMMA) for the virtual machine.
1.2. ATTRIBUTE: KVM_S390_VM_MEM_CLR_CMMA
----------------------------------------
:Parameters: none
:Returns: -EINVAL if CMMA was not enabled;
0 otherwise
Clear the CMMA status for all guest pages, so any pages the guest marked
as unused are again used any may not be reclaimed by the host.
1.3. ATTRIBUTE KVM_S390_VM_MEM_LIMIT_SIZE
-----------------------------------------
:Parameters: in attr->addr the address for the new limit of guest memory
:Returns: -EFAULT if the given address is not accessible;
-EINVAL if the virtual machine is of type UCONTROL;
-E2BIG if the given guest memory is to big for that machine;
-EBUSY if a vcpu is already defined;
-ENOMEM if not enough memory is available for a new shadow guest mapping;
0 otherwise.
Allows userspace to query the actual limit and set a new limit for
the maximum guest memory size. The limit will be rounded up to
2048 MB, 4096 GB, 8192 TB respectively, as this limit is governed by
the number of page table levels. In the case that there is no limit we will set
the limit to KVM_S390_NO_MEM_LIMIT (U64_MAX).
2. GROUP: KVM_S390_VM_CPU_MODEL
===============================
:Architectures: s390
2.1. ATTRIBUTE: KVM_S390_VM_CPU_MACHINE (r/o)
---------------------------------------------
Allows user space to retrieve machine and kvm specific cpu related information::
struct kvm_s390_vm_cpu_machine {
__u64 cpuid; # CPUID of host
__u32 ibc; # IBC level range offered by host
__u8 pad[4];
__u64 fac_mask[256]; # set of cpu facilities enabled by KVM
__u64 fac_list[256]; # set of cpu facilities offered by host
}
:Parameters: address of buffer to store the machine related cpu data
of type struct kvm_s390_vm_cpu_machine*
:Returns: -EFAULT if the given address is not accessible from kernel space;
-ENOMEM if not enough memory is available to process the ioctl;
0 in case of success.
2.2. ATTRIBUTE: KVM_S390_VM_CPU_PROCESSOR (r/w)
===============================================
Allows user space to retrieve or request to change cpu related information for a vcpu::
struct kvm_s390_vm_cpu_processor {
__u64 cpuid; # CPUID currently (to be) used by this vcpu
__u16 ibc; # IBC level currently (to be) used by this vcpu
__u8 pad[6];
__u64 fac_list[256]; # set of cpu facilities currently (to be) used
# by this vcpu
}
KVM does not enforce or limit the cpu model data in any form. Take the information
retrieved by means of KVM_S390_VM_CPU_MACHINE as hint for reasonable configuration
setups. Instruction interceptions triggered by additionally set facility bits that
are not handled by KVM need to by implemented in the VM driver code.
:Parameters: address of buffer to store/set the processor related cpu
data of type struct kvm_s390_vm_cpu_processor*.
:Returns: -EBUSY in case 1 or more vcpus are already activated (only in write case);
-EFAULT if the given address is not accessible from kernel space;
-ENOMEM if not enough memory is available to process the ioctl;
0 in case of success.
.. _KVM_S390_VM_CPU_MACHINE_FEAT:
2.3. ATTRIBUTE: KVM_S390_VM_CPU_MACHINE_FEAT (r/o)
--------------------------------------------------
Allows user space to retrieve available cpu features. A feature is available if
provided by the hardware and supported by kvm. In theory, cpu features could
even be completely emulated by kvm.
::
struct kvm_s390_vm_cpu_feat {
__u64 feat[16]; # Bitmap (1 = feature available), MSB 0 bit numbering
};
:Parameters: address of a buffer to load the feature list from.
:Returns: -EFAULT if the given address is not accessible from kernel space;
0 in case of success.
2.4. ATTRIBUTE: KVM_S390_VM_CPU_PROCESSOR_FEAT (r/w)
----------------------------------------------------
Allows user space to retrieve or change enabled cpu features for all VCPUs of a
VM. Features that are not available cannot be enabled.
See :ref:`KVM_S390_VM_CPU_MACHINE_FEAT` for
a description of the parameter struct.
:Parameters: address of a buffer to store/load the feature list from.
:Returns: -EFAULT if the given address is not accessible from kernel space;
-EINVAL if a cpu feature that is not available is to be enabled;
-EBUSY if at least one VCPU has already been defined;
0 in case of success.
.. _KVM_S390_VM_CPU_MACHINE_SUBFUNC:
2.5. ATTRIBUTE: KVM_S390_VM_CPU_MACHINE_SUBFUNC (r/o)
-----------------------------------------------------
Allows user space to retrieve available cpu subfunctions without any filtering
done by a set IBC. These subfunctions are indicated to the guest VCPU via
query or "test bit" subfunctions and used e.g. by cpacf functions, plo and ptff.
A subfunction block is only valid if KVM_S390_VM_CPU_MACHINE contains the
STFL(E) bit introducing the affected instruction. If the affected instruction
indicates subfunctions via a "query subfunction", the response block is
contained in the returned struct. If the affected instruction
indicates subfunctions via a "test bit" mechanism, the subfunction codes are
contained in the returned struct in MSB 0 bit numbering.
::
struct kvm_s390_vm_cpu_subfunc {
u8 plo[32]; # always valid (ESA/390 feature)
u8 ptff[16]; # valid with TOD-clock steering
u8 kmac[16]; # valid with Message-Security-Assist
u8 kmc[16]; # valid with Message-Security-Assist
u8 km[16]; # valid with Message-Security-Assist
u8 kimd[16]; # valid with Message-Security-Assist
u8 klmd[16]; # valid with Message-Security-Assist
u8 pckmo[16]; # valid with Message-Security-Assist-Extension 3
u8 kmctr[16]; # valid with Message-Security-Assist-Extension 4
u8 kmf[16]; # valid with Message-Security-Assist-Extension 4
u8 kmo[16]; # valid with Message-Security-Assist-Extension 4
u8 pcc[16]; # valid with Message-Security-Assist-Extension 4
u8 ppno[16]; # valid with Message-Security-Assist-Extension 5
u8 kma[16]; # valid with Message-Security-Assist-Extension 8
u8 kdsa[16]; # valid with Message-Security-Assist-Extension 9
u8 reserved[1792]; # reserved for future instructions
};
:Parameters: address of a buffer to load the subfunction blocks from.
:Returns: -EFAULT if the given address is not accessible from kernel space;
0 in case of success.
2.6. ATTRIBUTE: KVM_S390_VM_CPU_PROCESSOR_SUBFUNC (r/w)
-------------------------------------------------------
Allows user space to retrieve or change cpu subfunctions to be indicated for
all VCPUs of a VM. This attribute will only be available if kernel and
hardware support are in place.
The kernel uses the configured subfunction blocks for indication to
the guest. A subfunction block will only be used if the associated STFL(E) bit
has not been disabled by user space (so the instruction to be queried is
actually available for the guest).
As long as no data has been written, a read will fail. The IBC will be used
to determine available subfunctions in this case, this will guarantee backward
compatibility.
See :ref:`KVM_S390_VM_CPU_MACHINE_SUBFUNC` for a
description of the parameter struct.
:Parameters: address of a buffer to store/load the subfunction blocks from.
:Returns: -EFAULT if the given address is not accessible from kernel space;
-EINVAL when reading, if there was no write yet;
-EBUSY if at least one VCPU has already been defined;
0 in case of success.
3. GROUP: KVM_S390_VM_TOD
=========================
:Architectures: s390
3.1. ATTRIBUTE: KVM_S390_VM_TOD_HIGH
------------------------------------
Allows user space to set/get the TOD clock extension (u8) (superseded by
KVM_S390_VM_TOD_EXT).
:Parameters: address of a buffer in user space to store the data (u8) to
:Returns: -EFAULT if the given address is not accessible from kernel space;
-EINVAL if setting the TOD clock extension to != 0 is not supported
-EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
3.2. ATTRIBUTE: KVM_S390_VM_TOD_LOW
-----------------------------------
Allows user space to set/get bits 0-63 of the TOD clock register as defined in
the POP (u64).
:Parameters: address of a buffer in user space to store the data (u64) to
:Returns: -EFAULT if the given address is not accessible from kernel space
-EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
3.3. ATTRIBUTE: KVM_S390_VM_TOD_EXT
-----------------------------------
Allows user space to set/get bits 0-63 of the TOD clock register as defined in
the POP (u64). If the guest CPU model supports the TOD clock extension (u8), it
also allows user space to get/set it. If the guest CPU model does not support
it, it is stored as 0 and not allowed to be set to a value != 0.
:Parameters: address of a buffer in user space to store the data
(kvm_s390_vm_tod_clock) to
:Returns: -EFAULT if the given address is not accessible from kernel space;
-EINVAL if setting the TOD clock extension to != 0 is not supported
-EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
4. GROUP: KVM_S390_VM_CRYPTO
============================
:Architectures: s390
4.1. ATTRIBUTE: KVM_S390_VM_CRYPTO_ENABLE_AES_KW (w/o)
------------------------------------------------------
Allows user space to enable aes key wrapping, including generating a new
wrapping key.
:Parameters: none
:Returns: 0
4.2. ATTRIBUTE: KVM_S390_VM_CRYPTO_ENABLE_DEA_KW (w/o)
------------------------------------------------------
Allows user space to enable dea key wrapping, including generating a new
wrapping key.
:Parameters: none
:Returns: 0
4.3. ATTRIBUTE: KVM_S390_VM_CRYPTO_DISABLE_AES_KW (w/o)
-------------------------------------------------------
Allows user space to disable aes key wrapping, clearing the wrapping key.
:Parameters: none
:Returns: 0
4.4. ATTRIBUTE: KVM_S390_VM_CRYPTO_DISABLE_DEA_KW (w/o)
-------------------------------------------------------
Allows user space to disable dea key wrapping, clearing the wrapping key.
:Parameters: none
:Returns: 0
5. GROUP: KVM_S390_VM_MIGRATION
===============================
:Architectures: s390
5.1. ATTRIBUTE: KVM_S390_VM_MIGRATION_STOP (w/o)
------------------------------------------------
Allows userspace to stop migration mode, needed for PGSTE migration.
Setting this attribute when migration mode is not active will have no
effects.
:Parameters: none
:Returns: 0
5.2. ATTRIBUTE: KVM_S390_VM_MIGRATION_START (w/o)
-------------------------------------------------
Allows userspace to start migration mode, needed for PGSTE migration.
Setting this attribute when migration mode is already active will have
no effects.
Dirty tracking must be enabled on all memslots, else -EINVAL is returned. When
dirty tracking is disabled on any memslot, migration mode is automatically
stopped.
:Parameters: none
:Returns: -ENOMEM if there is not enough free memory to start migration mode;
-EINVAL if the state of the VM is invalid (e.g. no memory defined);
0 in case of success.
5.3. ATTRIBUTE: KVM_S390_VM_MIGRATION_STATUS (r/o)
--------------------------------------------------
Allows userspace to query the status of migration mode.
:Parameters: address of a buffer in user space to store the data (u64) to;
the data itself is either 0 if migration mode is disabled or 1
if it is enabled
:Returns: -EFAULT if the given address is not accessible from kernel space;
0 in case of success.
6. GROUP: KVM_ARM_VM_SMCCC_CTRL
===============================
:Architectures: arm64
6.1. ATTRIBUTE: KVM_ARM_VM_SMCCC_FILTER (w/o)
---------------------------------------------
:Parameters: Pointer to a ``struct kvm_smccc_filter``
:Returns:
====== ===========================================
EEXIST Range intersects with a previously inserted
or reserved range
EBUSY A vCPU in the VM has already run
EINVAL Invalid filter configuration
ENOMEM Failed to allocate memory for the in-kernel
representation of the SMCCC filter
====== ===========================================
Requests the installation of an SMCCC call filter described as follows::
enum kvm_smccc_filter_action {
KVM_SMCCC_FILTER_HANDLE = 0,
KVM_SMCCC_FILTER_DENY,
KVM_SMCCC_FILTER_FWD_TO_USER,
};
struct kvm_smccc_filter {
__u32 base;
__u32 nr_functions;
__u8 action;
__u8 pad[15];
};
The filter is defined as a set of non-overlapping ranges. Each
range defines an action to be applied to SMCCC calls within the range.
Userspace can insert multiple ranges into the filter by using
successive calls to this attribute.
The default configuration of KVM is such that all implemented SMCCC
calls are allowed. Thus, the SMCCC filter can be defined sparsely
by userspace, only describing ranges that modify the default behavior.
The range expressed by ``struct kvm_smccc_filter`` is
[``base``, ``base + nr_functions``). The range is not allowed to wrap,
i.e. userspace cannot rely on ``base + nr_functions`` overflowing.
The SMCCC filter applies to both SMC and HVC calls initiated by the
guest. The SMCCC filter gates the in-kernel emulation of SMCCC calls
and as such takes effect before other interfaces that interact with
SMCCC calls (e.g. hypercall bitmap registers).
Actions:
- ``KVM_SMCCC_FILTER_HANDLE``: Allows the guest SMCCC call to be
handled in-kernel. It is strongly recommended that userspace *not*
explicitly describe the allowed SMCCC call ranges.
- ``KVM_SMCCC_FILTER_DENY``: Rejects the guest SMCCC call in-kernel
and returns to the guest.
- ``KVM_SMCCC_FILTER_FWD_TO_USER``: The guest SMCCC call is forwarded
to userspace with an exit reason of ``KVM_EXIT_HYPERCALL``.
The ``pad`` field is reserved for future use and must be zero. KVM may
return ``-EINVAL`` if the field is nonzero.
KVM reserves the 'Arm Architecture Calls' range of function IDs and
will reject attempts to define a filter for any portion of these ranges:
=========== ===============
Start End (inclusive)
=========== ===============
0x8000_0000 0x8000_FFFF
0xC000_0000 0xC000_FFFF
=========== ===============
linux-7.2.3/Documentation/virt/kvm/devices/xics.rst
+92
View File
@@ -0,0 +1,92 @@
.. SPDX-License-Identifier: GPL-2.0
=========================
XICS interrupt controller
=========================
Device type supported: KVM_DEV_TYPE_XICS
Groups:
1. KVM_DEV_XICS_GRP_SOURCES
Attributes:
One per interrupt source, indexed by the source number.
2. KVM_DEV_XICS_GRP_CTRL
Attributes:
2.1 KVM_DEV_XICS_NR_SERVERS (write only)
The kvm_device_attr.addr points to a __u32 value which is the number of
interrupt server numbers (ie, highest possible vcpu id plus one).
Errors:
======= ==========================================
-EINVAL Value greater than KVM_MAX_VCPU_IDS.
-EFAULT Invalid user pointer for attr->addr.
-EBUSY A vcpu is already connected to the device.
======= ==========================================
This device emulates the XICS (eXternal Interrupt Controller
Specification) defined in PAPR. The XICS has a set of interrupt
sources, each identified by a 20-bit source number, and a set of
Interrupt Control Presentation (ICP) entities, also called "servers",
each associated with a virtual CPU.
The ICP entities are created by enabling the KVM_CAP_IRQ_ARCH
capability for each vcpu, specifying KVM_CAP_IRQ_XICS in args[0] and
the interrupt server number (i.e. the vcpu number from the XICS's
point of view) in args[1] of the kvm_enable_cap struct. Each ICP has
64 bits of state which can be read and written using the
KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls on the vcpu. The 64 bit
state word has the following bitfields, starting at the
least-significant end of the word:
* Unused, 16 bits
* Pending interrupt priority, 8 bits
Zero is the highest priority, 255 means no interrupt is pending.
* Pending IPI (inter-processor interrupt) priority, 8 bits
Zero is the highest priority, 255 means no IPI is pending.
* Pending interrupt source number, 24 bits
Zero means no interrupt pending, 2 means an IPI is pending
* Current processor priority, 8 bits
Zero is the highest priority, meaning no interrupts can be
delivered, and 255 is the lowest priority.
Each source has 64 bits of state that can be read and written using
the KVM_GET_DEVICE_ATTR and KVM_SET_DEVICE_ATTR ioctls, specifying the
KVM_DEV_XICS_GRP_SOURCES attribute group, with the attribute number being
the interrupt source number. The 64 bit state word has the following
bitfields, starting from the least-significant end of the word:
* Destination (server number), 32 bits
This specifies where the interrupt should be sent, and is the
interrupt server number specified for the destination vcpu.
* Priority, 8 bits
This is the priority specified for this interrupt source, where 0 is
the highest priority and 255 is the lowest. An interrupt with a
priority of 255 will never be delivered.
* Level sensitive flag, 1 bit
This bit is 1 for a level-sensitive interrupt source, or 0 for
edge-sensitive (or MSI).
* Masked flag, 1 bit
This bit is set to 1 if the interrupt is masked (cannot be delivered
regardless of its priority), for example by the ibm,int-off RTAS
call, or 0 if it is not masked.
* Pending flag, 1 bit
This bit is 1 if the source has a pending interrupt, otherwise 0.
Only one XICS instance may be created per VM.
linux-7.2.3/Documentation/virt/kvm/devices/xive.rst
+247
View File
@@ -0,0 +1,247 @@
.. SPDX-License-Identifier: GPL-2.0
===========================================================
POWER9 eXternal Interrupt Virtualization Engine (XIVE Gen1)
===========================================================
Device types supported:
- KVM_DEV_TYPE_XIVE POWER9 XIVE Interrupt Controller generation 1
This device acts as a VM interrupt controller. It provides the KVM
interface to configure the interrupt sources of a VM in the underlying
POWER9 XIVE interrupt controller.
Only one XIVE instance may be instantiated. A guest XIVE device
requires a POWER9 host and the guest OS should have support for the
XIVE native exploitation interrupt mode. If not, it should run using
the legacy interrupt mode, referred as XICS (POWER7/8).
* Device Mappings
The KVM device exposes different MMIO ranges of the XIVE HW which
are required for interrupt management. These are exposed to the
guest in VMAs populated with a custom VM fault handler.
1. Thread Interrupt Management Area (TIMA)
Each thread has an associated Thread Interrupt Management context
composed of a set of registers. These registers let the thread
handle priority management and interrupt acknowledgment. The most
important are :
- Interrupt Pending Buffer (IPB)
- Current Processor Priority (CPPR)
- Notification Source Register (NSR)
They are exposed to software in four different pages each proposing
a view with a different privilege. The first page is for the
physical thread context and the second for the hypervisor. Only the
third (operating system) and the fourth (user level) are exposed the
guest.
2. Event State Buffer (ESB)
Each source is associated with an Event State Buffer (ESB) with
either a pair of even/odd pair of pages which provides commands to
manage the source: to trigger, to EOI, to turn off the source for
instance.
3. Device pass-through
When a device is passed-through into the guest, the source
interrupts are from a different HW controller (PHB4) and the ESB
pages exposed to the guest should accommodate this change.
The passthru_irq helpers, kvmppc_xive_set_mapped() and
kvmppc_xive_clr_mapped() are called when the device HW irqs are
mapped into or unmapped from the guest IRQ number space. The KVM
device extends these helpers to clear the ESB pages of the guest IRQ
number being mapped and then lets the VM fault handler repopulate.
The handler will insert the ESB page corresponding to the HW
interrupt of the device being passed-through or the initial IPI ESB
page if the device has being removed.
The ESB remapping is fully transparent to the guest and the OS
device driver. All handling is done within VFIO and the above
helpers in KVM-PPC.
* Groups:
1. KVM_DEV_XIVE_GRP_CTRL
Provides global controls on the device
Attributes:
1.1 KVM_DEV_XIVE_RESET (write only)
Resets the interrupt controller configuration for sources and event
queues. To be used by kexec and kdump.
Errors: none
1.2 KVM_DEV_XIVE_EQ_SYNC (write only)
Sync all the sources and queues and mark the EQ pages dirty. This
to make sure that a consistent memory state is captured when
migrating the VM.
Errors: none
1.3 KVM_DEV_XIVE_NR_SERVERS (write only)
The kvm_device_attr.addr points to a __u32 value which is the number of
interrupt server numbers (ie, highest possible vcpu id plus one).
Errors:
======= ==========================================
-EINVAL Value greater than KVM_MAX_VCPU_IDS.
-EFAULT Invalid user pointer for attr->addr.
-EBUSY A vCPU is already connected to the device.
======= ==========================================
2. KVM_DEV_XIVE_GRP_SOURCE (write only)
Initializes a new source in the XIVE device and mask it.
Attributes:
Interrupt source number (64-bit)
The kvm_device_attr.addr points to a __u64 value::
bits: | 63 .... 2 | 1 | 0
values: | unused | level | type
- type: 0:MSI 1:LSI
- level: assertion level in case of an LSI.
Errors:
======= ==========================================
-E2BIG Interrupt source number is out of range
-ENOMEM Could not create a new source block
-EFAULT Invalid user pointer for attr->addr.
-ENXIO Could not allocate underlying HW interrupt
======= ==========================================
3. KVM_DEV_XIVE_GRP_SOURCE_CONFIG (write only)
Configures source targeting
Attributes:
Interrupt source number (64-bit)
The kvm_device_attr.addr points to a __u64 value::
bits: | 63 .... 33 | 32 | 31 .. 3 | 2 .. 0
values: | eisn | mask | server | priority
- priority: 0-7 interrupt priority level
- server: CPU number chosen to handle the interrupt
- mask: mask flag (unused)
- eisn: Effective Interrupt Source Number
Errors:
======= =======================================================
-ENOENT Unknown source number
-EINVAL Not initialized source number
-EINVAL Invalid priority
-EINVAL Invalid CPU number.
-EFAULT Invalid user pointer for attr->addr.
-ENXIO CPU event queues not configured or configuration of the
underlying HW interrupt failed
-EBUSY No CPU available to serve interrupt
======= =======================================================
4. KVM_DEV_XIVE_GRP_EQ_CONFIG (read-write)
Configures an event queue of a CPU
Attributes:
EQ descriptor identifier (64-bit)
The EQ descriptor identifier is a tuple (server, priority)::
bits: | 63 .... 32 | 31 .. 3 | 2 .. 0
values: | unused | server | priority
The kvm_device_attr.addr points to::
struct kvm_ppc_xive_eq {
__u32 flags;
__u32 qshift;
__u64 qaddr;
__u32 qtoggle;
__u32 qindex;
__u8 pad[40];
};
- flags: queue flags
KVM_XIVE_EQ_ALWAYS_NOTIFY (required)
forces notification without using the coalescing mechanism
provided by the XIVE END ESBs.
- qshift: queue size (power of 2)
- qaddr: real address of queue
- qtoggle: current queue toggle bit
- qindex: current queue index
- pad: reserved for future use
Errors:
======= =========================================
-ENOENT Invalid CPU number
-EINVAL Invalid priority
-EINVAL Invalid flags
-EINVAL Invalid queue size
-EINVAL Invalid queue address
-EFAULT Invalid user pointer for attr->addr.
-EIO Configuration of the underlying HW failed
======= =========================================
5. KVM_DEV_XIVE_GRP_SOURCE_SYNC (write only)
Synchronize the source to flush event notifications
Attributes:
Interrupt source number (64-bit)
Errors:
======= =============================
-ENOENT Unknown source number
-EINVAL Not initialized source number
======= =============================
* VCPU state
The XIVE IC maintains VP interrupt state in an internal structure
called the NVT. When a VP is not dispatched on a HW processor
thread, this structure can be updated by HW if the VP is the target
of an event notification.
It is important for migration to capture the cached IPB from the NVT
as it synthesizes the priorities of the pending interrupts. We
capture a bit more to report debug information.
KVM_REG_PPC_VP_STATE (2 * 64bits)::
bits: | 63 .... 32 | 31 .... 0 |
values: | TIMA word0 | TIMA word1 |
bits: | 127 .......... 64 |
values: | unused |
* Migration:
Saving the state of a VM using the XIVE native exploitation mode
should follow a specific sequence. When the VM is stopped :
1. Mask all sources (PQ=01) to stop the flow of events.
2. Sync the XIVE device with the KVM control KVM_DEV_XIVE_EQ_SYNC to
flush any in-flight event notification and to stabilize the EQs. At
this stage, the EQ pages are marked dirty to make sure they are
transferred in the migration sequence.
3. Capture the state of the source targeting, the EQs configuration
and the state of thread interrupt context registers.
Restore is similar:
1. Restore the EQ configuration. As targeting depends on it.
2. Restore targeting
3. Restore the thread interrupt contexts
4. Restore the source states
5. Let the vCPU run