Resguardo inicial

2026-09-06 12:53:21 -06:00
parent 662efe3c2a
commit ad2088d178
94853 changed files with 43200404 additions and 0 deletions
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# linux/arch/arm/boot/bootp/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+
+ifdef PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+
+# If PHYS_OFFSET is set, INITRD_PHYS and PARAMS_PHYS can be derived,
+# otherwise they must be passed on the command line.
+#
+# Note: the following conditions must always be true:
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+PARAMS_PHYS := $(call add_hex, $(PHYS_OFFSET), 0x100)
+
+# guess an initrd location if possible
+initrd_offset-$(CONFIG_ARCH_FOOTBRIDGE)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_SA1100)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_RPC)	+= 0x08000000
+INITRD_OFFSET := $(initrd_offset-y)
+ifdef INITRD_OFFSET
+INITRD_PHYS := $(call add_hex, $(PHYS_OFFSET), $(INITRD_OFFSET))
+endif
+
+endif
+
+PHONY += initrd
+initrd:
+	@test "$(PARAMS_PHYS)" != "" || \
+	(echo bootpImage: You must specify PHYS_OFFSET of PARAMS_PHYS ; exit -1)
+	@test "$(INITRD_PHYS)" != "" || \
+	(echo bootpImage: You must specify INITRD_OFFSET or INITRD_PHYS ; exit -1)
+	@test "$(INITRD)" != "" || \
+	(echo bootpImage: You must specify INITRD; exit -1)
+
+LDFLAGS_bootp	:= --no-undefined -X \
+		 --defsym initrd_phys=$(INITRD_PHYS) \
+		 --defsym params_phys=$(PARAMS_PHYS) -T
+AFLAGS_initrd.o :=-DINITRD=\"$(INITRD)\"
+
+targets	:= bootp init.o kernel.o initrd.o
+
+# Note that bootp.lds picks up kernel.o and initrd.o
+$(obj)/bootp:	$(src)/bootp.lds $(addprefix $(obj)/,init.o kernel.o initrd.o) FORCE
+	$(call if_changed,ld)
+
+# kernel.o and initrd.o includes a binary image using
+# .incbin, a dependency which is not tracked automatically
+
+$(obj)/kernel.o: arch/arm/boot/zImage FORCE
+
+$(obj)/initrd.o: initrd $(INITRD) FORCE
+
+PHONY += $(INITRD)
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  linux/arch/arm/boot/bootp/bootp.lds
+ *
+ *  Copyright (C) 2000-2002 Russell King
+ */
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+  . = 0;
+  .text : {
+   _stext = .;
+   *(.start)
+   *(.text)
+   initrd_size = initrd_end - initrd_start;
+   _etext = .;
+  }
+
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+  .stab.excl 0 : { *(.stab.excl) }
+  .stab.exclstr 0 : { *(.stab.exclstr) }
+  .stab.index 0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment 0 : { *(.comment) }
+}
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  linux/arch/arm/boot/bootp/init.S
+ *
+ *  Copyright (C) 2000-2003 Russell King.
+ *
+ *  "Header" file for splitting kernel + initrd.  Note that we pass
+ *  r0 through to r3 straight through.
+ *
+ *  This demonstrates how to append code to the start of the kernel
+ *  zImage, and boot the kernel without copying it around.  This
+ *  example would be simpler; if we didn't have an object of unknown
+ *  size immediately following the kernel, we could build this into
+ *  a binary blob, and concatenate the zImage using the cat command.
+ */
+		.section .start, "ax"
+		.type	_start, #function
+		.globl	_start
+
+_start:		add	lr, pc, #-0x8		@ lr = current load addr
+		adr	r13, data
+		ldmia	r13!, {r4-r6}		@ r5 = dest, r6 = length
+		add	r4, r4, lr		@ r4 = initrd_start + load addr
+		bl	move			@ move the initrd
+
+/*
+ * Setup the initrd parameters to pass to the kernel.  This can only be
+ * passed in via the tagged list.
+ */
+		ldmia	r13, {r5-r9}		@ get size and addr of initrd
+						@ r5 = ATAG_CORE
+						@ r6 = ATAG_INITRD2
+						@ r7 = initrd start
+						@ r8 = initrd end
+						@ r9 = param_struct address
+
+		ldr	r10, [r9, #4]		@ get first tag
+		teq	r10, r5			@ is it ATAG_CORE?
+/*
+ * If we didn't find a valid tag list, create a dummy ATAG_CORE entry.
+ */
+		movne	r10, #0			@ terminator
+		movne	r4, #2			@ Size of this entry (2 words)
+		stmiane	r9, {r4, r5, r10}	@ Size, ATAG_CORE, terminator
+
+/*
+ * find the end of the tag list, and then add an INITRD tag on the end.
+ * If there is already an INITRD tag, then we ignore it; the last INITRD
+ * tag takes precedence.
+ */
+taglist:	ldr	r10, [r9, #0]		@ tag length
+		teq	r10, #0			@ last tag (zero length)?
+		addne	r9, r9, r10, lsl #2
+		bne	taglist
+
+		mov	r5, #4			@ Size of initrd tag (4 words)
+		stmia	r9, {r5, r6, r7, r8, r10}
+		b	kernel_start		@ call kernel
+
+/*
+ * Move the block of memory length r6 from address r4 to address r5
+ */
+move:		ldmia	r4!, {r7 - r10}		@ move 32-bytes at a time
+		stmia	r5!, {r7 - r10}
+		ldmia	r4!, {r7 - r10}
+		stmia	r5!, {r7 - r10}
+		subs	r6, r6, #8 * 4
+		bcs	move
+		mov	pc, lr
+
+		.size	_start, . - _start
+
+		.align
+
+		.type	data,#object
+data:		.word	initrd_start		@ source initrd address
+		.word	initrd_phys		@ destination initrd address
+		.word	initrd_size		@ initrd size
+
+		.word	0x54410001		@ r5 = ATAG_CORE
+		.word	0x54420005		@ r6 = ATAG_INITRD2
+		.word	initrd_phys		@ r7
+		.word	initrd_size		@ r8
+		.word	params_phys		@ r9
+		.size	data, . - data
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+	.type	initrd_start,#object
+	.globl	initrd_start
+initrd_start:
+	.incbin	INITRD
+	.globl	initrd_end
+initrd_end:
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+	.globl	kernel_start
+kernel_start:
+	.incbin	"arch/arm/boot/zImage"
+	.globl	kernel_end
+kernel_end:
+	.align	2