Resguardo inicial

linux-7.2.3/arch/arm/boot/compressed/.gitignore

@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+piggy_data
+vmlinux
+vmlinux.lds

linux-7.2.3/arch/arm/boot/compressed/Makefile

@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# linux/arch/arm/boot/compressed/Makefile
+#
+# create a compressed vmlinuz image from the original vmlinux
+#
+
+OBJS		=
+
+HEAD	= head.o
+OBJS	+= misc.o decompress.o
+ifeq ($(CONFIG_DEBUG_UNCOMPRESS),y)
+OBJS	+= debug.o
+AFLAGS_head.o += -DDEBUG
+endif
+
+# string library code (-Os is enforced to keep it much smaller)
+OBJS		+= string.o
+CFLAGS_string.o	:= -Os
+
+ifeq ($(CONFIG_ARM_VIRT_EXT),y)
+OBJS		+= hyp-stub.o
+endif
+
+#
+# Architecture dependencies
+#
+ifeq ($(CONFIG_ARCH_ACORN),y)
+OBJS		+= ll_char_wr.o font.o
+endif
+
+ifeq ($(CONFIG_ARCH_SA1100),y)
+OBJS		+= head-sa1100.o
+endif
+
+ifeq ($(CONFIG_CPU_XSCALE),y)
+OBJS		+= head-xscale.o
+endif
+
+ifeq ($(CONFIG_PXA_SHARPSL_DETECT_MACH_ID),y)
+OBJS		+= head-sharpsl.o
+endif
+
+ifeq ($(CONFIG_CPU_ENDIAN_BE32),y)
+ifeq ($(CONFIG_CPU_CP15),y)
+OBJS		+= big-endian.o
+else
+# The endian should be set by h/w design.
+endif
+endif
+
+#
+# We now have a PIC decompressor implementation.  Decompressors running
+# from RAM should not define ZTEXTADDR.  Decompressors running directly
+# from ROM or Flash must define ZTEXTADDR (preferably via the config)
+# FIXME: Previous assignment to ztextaddr-y is lost here. See SHARK
+ifeq ($(CONFIG_ZBOOT_ROM),y)
+ZTEXTADDR	:= $(CONFIG_ZBOOT_ROM_TEXT)
+ZBSSADDR	:= $(CONFIG_ZBOOT_ROM_BSS)
+else
+ZTEXTADDR	:= 0
+ZBSSADDR	:= ALIGN(8)
+endif
+
+MALLOC_SIZE	:= 65536
+
+AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) -DMALLOC_SIZE=$(MALLOC_SIZE)
+CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)"
+CPPFLAGS_vmlinux.lds += -DTEXT_OFFSET="$(TEXT_OFFSET)"
+CPPFLAGS_vmlinux.lds += -DMALLOC_SIZE="$(MALLOC_SIZE)"
+
+compress-$(CONFIG_KERNEL_GZIP) = gzip
+compress-$(CONFIG_KERNEL_LZO)  = lzo_with_size
+compress-$(CONFIG_KERNEL_LZMA) = lzma_with_size
+compress-$(CONFIG_KERNEL_XZ)   = xzkern_with_size
+compress-$(CONFIG_KERNEL_LZ4)  = lz4_with_size
+
+libfdt_objs := fdt_rw.o fdt_ro.o fdt_wip.o fdt.o
+
+ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+CFLAGS_REMOVE_atags_to_fdt.o += -Wframe-larger-than=${CONFIG_FRAME_WARN}
+CFLAGS_atags_to_fdt.o += -Wframe-larger-than=1280
+OBJS	+= $(libfdt_objs) atags_to_fdt.o
+endif
+ifeq ($(CONFIG_USE_OF),y)
+OBJS	+= $(libfdt_objs) fdt_check_mem_start.o
+endif
+
+OBJS	+= lib1funcs.o ashldi3.o bswapsdi2.o
+
+targets       := vmlinux vmlinux.lds piggy_data piggy.o \
+		 head.o $(OBJS)
+
+KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
+
+ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
+	     -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
+	     $(DISABLE_KSTACK_ERASE) \
+	     -I$(obj)
+ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg
+asflags-y := -DZIMAGE
+
+# Supply kernel BSS size to the decompressor via a linker symbol.
+KBSS_SZ = $(shell echo $$(($$($(NM) vmlinux | \
+		sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
+		       -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
+LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
+# Supply ZRELADDR to the decompressor via a linker symbol.
+ifneq ($(CONFIG_AUTO_ZRELADDR),y)
+LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
+endif
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux += --be8
+endif
+# Report unresolved symbol references
+LDFLAGS_vmlinux += --no-undefined
+# Delete all temporary local symbols
+LDFLAGS_vmlinux += -X
+# Report orphan sections
+ifdef CONFIG_LD_ORPHAN_WARN
+LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
+endif
+# Next argument is a linker script
+LDFLAGS_vmlinux += -T
+
+# We need to prevent any GOTOFF relocs being used with references
+# to symbols in the .bss section since we cannot relocate them
+# independently from the rest at run time.  This can be achieved by
+# ensuring that no private .bss symbols exist, as global symbols
+# always have a GOT entry which is what we need.
+# The .data section is already discarded by the linker script so no need
+# to bother about it here.
+check_for_bad_syms = \
+bad_syms=$$($(NM) $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
+[ -z "$$bad_syms" ] || \
+  ( echo "following symbols must have non local/private scope:" >&2; \
+    echo "$$bad_syms" >&2; false )
+
+check_for_multiple_zreladdr = \
+if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
+	echo 'multiple zreladdrs: $(ZRELADDR)'; \
+	echo 'This needs CONFIG_AUTO_ZRELADDR to be set'; \
+	false; \
+fi
+
+efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
+		$(addprefix $(obj)/, $(OBJS)) \
+		$(efi-obj-y) FORCE
+	@$(check_for_multiple_zreladdr)
+	$(call if_changed,ld)
+	@$(check_for_bad_syms)
+
+$(obj)/piggy_data: $(obj)/../Image FORCE
+	$(call if_changed,$(compress-y))
+
+$(obj)/piggy.o: $(obj)/piggy_data
+
+CFLAGS_font.o := -DBOOTLOADER

linux-7.2.3/arch/arm/boot/compressed/ashldi3.S

@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __aeabi_llsl */
+#include "../../lib/ashldi3.S"

linux-7.2.3/arch/arm/boot/compressed/atags_to_fdt.c

@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/libfdt_env.h>
+#include <asm/setup.h>
+#include <libfdt.h>
+#include "misc.h"
+
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
+#define do_extend_cmdline 1
+#else
+#define do_extend_cmdline 0
+#endif
+
+#define NR_BANKS 16
+
+static int node_offset(void *fdt, const char *node_path)
+{
+	int offset = fdt_path_offset(fdt, node_path);
+	if (offset == -FDT_ERR_NOTFOUND)
+		/* Add the node to root if not found, dropping the leading '/' */
+		offset = fdt_add_subnode(fdt, 0, node_path + 1);
+	return offset;
+}
+
+static int setprop(void *fdt, const char *node_path, const char *property,
+		   void *val_array, int size)
+{
+	int offset = node_offset(fdt, node_path);
+	if (offset < 0)
+		return offset;
+	return fdt_setprop(fdt, offset, property, val_array, size);
+}
+
+static int setprop_string(void *fdt, const char *node_path,
+			  const char *property, const char *string)
+{
+	int offset = node_offset(fdt, node_path);
+	if (offset < 0)
+		return offset;
+	return fdt_setprop_string(fdt, offset, property, string);
+}
+
+static int setprop_cell(void *fdt, const char *node_path,
+			const char *property, uint32_t val)
+{
+	int offset = node_offset(fdt, node_path);
+	if (offset < 0)
+		return offset;
+	return fdt_setprop_cell(fdt, offset, property, val);
+}
+
+static const void *getprop(const void *fdt, const char *node_path,
+			   const char *property, int *len)
+{
+	int offset = fdt_path_offset(fdt, node_path);
+
+	if (offset == -FDT_ERR_NOTFOUND)
+		return NULL;
+
+	return fdt_getprop(fdt, offset, property, len);
+}
+
+static uint32_t get_cell_size(const void *fdt)
+{
+	int len;
+	uint32_t cell_size = 1;
+	const __be32 *size_len =  getprop(fdt, "/", "#size-cells", &len);
+
+	if (size_len)
+		cell_size = fdt32_to_cpu(*size_len);
+	return cell_size;
+}
+
+static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
+{
+	char cmdline[COMMAND_LINE_SIZE];
+	const char *fdt_bootargs;
+	char *ptr = cmdline;
+	int len = 0;
+
+	/* copy the fdt command line into the buffer */
+	fdt_bootargs = getprop(fdt, "/chosen", "bootargs", &len);
+	if (fdt_bootargs)
+		if (len < COMMAND_LINE_SIZE) {
+			memcpy(ptr, fdt_bootargs, len);
+			/* len is the length of the string
+			 * including the NULL terminator */
+			ptr += len - 1;
+		}
+
+	/* and append the ATAG_CMDLINE */
+	if (fdt_cmdline) {
+		len = strlen(fdt_cmdline);
+		if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
+			*ptr++ = ' ';
+			memcpy(ptr, fdt_cmdline, len);
+			ptr += len;
+		}
+	}
+	*ptr = '\0';
+
+	setprop_string(fdt, "/chosen", "bootargs", cmdline);
+}
+
+static void hex_str(char *out, uint32_t value)
+{
+	uint32_t digit;
+	int idx;
+
+	for (idx = 7; idx >= 0; idx--) {
+		digit = value >> 28;
+		value <<= 4;
+		digit &= 0xf;
+		if (digit < 10)
+			digit += '0';
+		else
+			digit += 'A'-10;
+		*out++ = digit;
+	}
+	*out = '\0';
+}
+
+/*
+ * Convert and fold provided ATAGs into the provided FDT.
+ *
+ * Return values:
+ *    = 0 -> pretend success
+ *    = 1 -> bad ATAG (may retry with another possible ATAG pointer)
+ *    < 0 -> error from libfdt
+ */
+int atags_to_fdt(void *atag_list, void *fdt, int total_space)
+{
+	struct tag *atag = atag_list;
+	/* In the case of 64 bits memory size, need to reserve 2 cells for
+	 * address and size for each bank */
+	__be32 mem_reg_property[2 * 2 * NR_BANKS];
+	int memcount = 0;
+	int ret, memsize;
+
+	/* make sure we've got an aligned pointer */
+	if ((u32)atag_list & 0x3)
+		return 1;
+
+	/* if we get a DTB here we're done already */
+	if (*(__be32 *)atag_list == cpu_to_fdt32(FDT_MAGIC))
+	       return 0;
+
+	/* validate the ATAG */
+	if (atag->hdr.tag != ATAG_CORE ||
+	    (atag->hdr.size != tag_size(tag_core) &&
+	     atag->hdr.size != 2))
+		return 1;
+
+	/* let's give it all the room it could need */
+	ret = fdt_open_into(fdt, fdt, total_space);
+	if (ret < 0)
+		return ret;
+
+	for_each_tag(atag, atag_list) {
+		if (atag->hdr.tag == ATAG_CMDLINE) {
+			/* Append the ATAGS command line to the device tree
+			 * command line.
+			 * NB: This means that if the same parameter is set in
+			 * the device tree and in the tags, the one from the
+			 * tags will be chosen.
+			 */
+			if (do_extend_cmdline)
+				merge_fdt_bootargs(fdt,
+						   atag->u.cmdline.cmdline);
+			else
+				setprop_string(fdt, "/chosen", "bootargs",
+					       atag->u.cmdline.cmdline);
+		} else if (atag->hdr.tag == ATAG_MEM) {
+			if (memcount >= sizeof(mem_reg_property)/4)
+				continue;
+			if (!atag->u.mem.size)
+				continue;
+			memsize = get_cell_size(fdt);
+
+			if (memsize == 2) {
+				/* if memsize is 2, that means that
+				 * each data needs 2 cells of 32 bits,
+				 * so the data are 64 bits */
+				__be64 *mem_reg_prop64 =
+					(__be64 *)mem_reg_property;
+				mem_reg_prop64[memcount++] =
+					cpu_to_fdt64(atag->u.mem.start);
+				mem_reg_prop64[memcount++] =
+					cpu_to_fdt64(atag->u.mem.size);
+			} else {
+				mem_reg_property[memcount++] =
+					cpu_to_fdt32(atag->u.mem.start);
+				mem_reg_property[memcount++] =
+					cpu_to_fdt32(atag->u.mem.size);
+			}
+
+		} else if (atag->hdr.tag == ATAG_INITRD2) {
+			uint32_t initrd_start, initrd_size;
+			initrd_start = atag->u.initrd.start;
+			initrd_size = atag->u.initrd.size;
+			setprop_cell(fdt, "/chosen", "linux,initrd-start",
+					initrd_start);
+			setprop_cell(fdt, "/chosen", "linux,initrd-end",
+					initrd_start + initrd_size);
+		} else if (atag->hdr.tag == ATAG_SERIAL) {
+			char serno[16+2];
+			hex_str(serno, atag->u.serialnr.high);
+			hex_str(serno+8, atag->u.serialnr.low);
+			setprop_string(fdt, "/", "serial-number", serno);
+		}
+	}
+
+	if (memcount) {
+		setprop(fdt, "/memory", "reg", mem_reg_property,
+			4 * memcount * memsize);
+	}
+
+	return fdt_pack(fdt);
+}

linux-7.2.3/arch/arm/boot/compressed/big-endian.S

@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  linux/arch/arm/boot/compressed/big-endian.S
+ *
+ *  Switch CPU into big endian mode.
+ *  Author: Nicolas Pitre
+ */
+
+	.section ".start", "ax"
+
+	mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+	orr	r0, r0, #(1 << 7)	@ enable big endian mode
+	mcr	p15, 0, r0, c1, c0, 0	@ write control reg
+

linux-7.2.3/arch/arm/boot/compressed/bswapsdi2.S

@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __bswapsi2, __bswapdi2 */
+#include "../../lib/bswapsdi2.S"

linux-7.2.3/arch/arm/boot/compressed/debug.S

@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#ifndef CONFIG_DEBUG_SEMIHOSTING
+
+#include CONFIG_DEBUG_LL_INCLUDE
+
+ENTRY(putc)
+	addruart r1, r2, r3
+#ifdef CONFIG_DEBUG_UART_FLOW_CONTROL
+	waituartcts r3, r1
+#endif
+	waituarttxrdy r3, r1
+	senduart r0, r1
+	busyuart r3, r1
+	mov	 pc, lr
+ENDPROC(putc)
+
+#else
+
+ENTRY(putc)
+	adr	r1, 1f
+	ldmia	r1, {r2, r3}
+	add	r2, r2, r1
+	ldr	r1, [r2, r3]
+	strb	r0, [r1]
+	mov	r0, #0x03		@ SYS_WRITEC
+   ARM(	svc	#0x123456	)
+#ifdef CONFIG_CPU_V7M
+ THUMB(	bkpt	#0xab		)
+#else
+ THUMB(	svc	#0xab		)
+#endif
+	mov	pc, lr
+	.align	2
+1:	.word	_GLOBAL_OFFSET_TABLE_ - .
+	.word	semi_writec_buf(GOT)
+ENDPROC(putc)
+
+	.bss
+	.global	semi_writec_buf
+	.type   semi_writec_buf, %object
+semi_writec_buf:
+	.space	4
+	.size	semi_writec_buf, 4
+
+#endif

linux-7.2.3/arch/arm/boot/compressed/decompress.c

@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+#define _LINUX_STRING_H_
+
+#include <linux/compiler.h>	/* for inline */
+#include <linux/types.h>	/* for size_t */
+#include <linux/stddef.h>	/* for NULL */
+#include <linux/linkage.h>
+#include <asm/string.h>
+#include "misc.h"
+
+#define STATIC static
+#define STATIC_RW_DATA	/* non-static please */
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Trace(x) fprintf x
+#  define Tracev(x) {if (verbose) fprintf x ;}
+#  define Tracevv(x) {if (verbose>1) fprintf x ;}
+#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+#  define Assert(cond,msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c,x)
+#  define Tracecv(c,x)
+#endif
+
+/* Not needed, but used in some headers pulled in by decompressors */
+extern char * strstr(const char * s1, const char *s2);
+extern size_t strlen(const char *s);
+extern int strcmp(const char *cs, const char *ct);
+extern int memcmp(const void *cs, const void *ct, size_t count);
+extern char * strchrnul(const char *, int);
+
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
+#ifdef CONFIG_KERNEL_XZ
+/* Prevent KASAN override of string helpers in decompressor */
+#undef memmove
+#define memmove memmove
+#undef memcpy
+#define memcpy memcpy
+#include "../../../../lib/decompress_unxz.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZ4
+#include "../../../../lib/decompress_unlz4.c"
+#endif
+
+int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
+{
+	return __decompress(input, len, NULL, NULL, output, 0, NULL, error);
+}

linux-7.2.3/arch/arm/boot/compressed/efi-header.S

@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013-2017 Linaro Ltd
+ * Authors: Roy Franz <roy.franz@linaro.org>
+ *          Ard Biesheuvel <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/pe.h>
+#include <linux/sizes.h>
+
+		.macro	__nop
+ AR_CLASS(	mov	r0, r0		)
+  M_CLASS(	nop.w			)
+		.endm
+
+		.macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+		@ This is a two-instruction NOP, which happens to bear the
+		@ PE/COFF signature "MZ" in the first two bytes, so the kernel
+		@ is accepted as an EFI binary. Booting via the UEFI stub
+		@ will not execute those instructions, but the ARM/Linux
+		@ boot protocol does, so we need some NOPs here.
+		.inst	IMAGE_DOS_SIGNATURE | (0xe225 << 16) @ eor r5, r5, 0x4d000
+		eor	r5, r5, 0x4d000			@ undo previous insn
+#else
+		__nop
+		__nop
+#endif
+		.endm
+
+		.macro	__EFI_HEADER
+#ifdef CONFIG_EFI_STUB
+		.set	start_offset, __efi_start - start
+		.org	start + 0x3c
+		@
+		@ The PE header can be anywhere in the file, but for
+		@ simplicity we keep it together with the MSDOS header
+		@ The offset to the PE/COFF header needs to be at offset
+		@ 0x3C in the MSDOS header.
+		@ The only 2 fields of the MSDOS header that are used are this
+		@ PE/COFF offset, and the "MZ" bytes at offset 0x0.
+		@
+		.long	pe_header - start		@ Offset to the PE header.
+
+pe_header:
+		.long	IMAGE_NT_SIGNATURE
+
+coff_header:
+		.short	IMAGE_FILE_MACHINE_THUMB	@ Machine
+		.short	section_count			@ NumberOfSections
+		.long	0 				@ TimeDateStamp
+		.long	0				@ PointerToSymbolTable
+		.long	0				@ NumberOfSymbols
+		.short	section_table - optional_header	@ SizeOfOptionalHeader
+		.short	IMAGE_FILE_32BIT_MACHINE | \
+			IMAGE_FILE_DEBUG_STRIPPED | \
+			IMAGE_FILE_EXECUTABLE_IMAGE | \
+			IMAGE_FILE_LINE_NUMS_STRIPPED	@ Characteristics
+
+#define __pecoff_code_size (__pecoff_data_start - __efi_start)
+
+optional_header:
+		.short	IMAGE_NT_OPTIONAL_HDR32_MAGIC	@ PE32 format
+		.byte	0x02				@ MajorLinkerVersion
+		.byte	0x14				@ MinorLinkerVersion
+		.long	__pecoff_code_size		@ SizeOfCode
+		.long	__pecoff_data_size		@ SizeOfInitializedData
+		.long	0				@ SizeOfUninitializedData
+		.long	efi_pe_entry - start		@ AddressOfEntryPoint
+		.long	start_offset			@ BaseOfCode
+		.long	__pecoff_data_start - start	@ BaseOfData
+
+extra_header_fields:
+		.long	0				@ ImageBase
+		.long	SZ_4K				@ SectionAlignment
+		.long	SZ_512				@ FileAlignment
+		.short	0				@ MajorOsVersion
+		.short	0				@ MinorOsVersion
+		.short	LINUX_EFISTUB_MAJOR_VERSION	@ MajorImageVersion
+		.short	LINUX_EFISTUB_MINOR_VERSION	@ MinorImageVersion
+		.short	0				@ MajorSubsystemVersion
+		.short	0				@ MinorSubsystemVersion
+		.long	0				@ Win32VersionValue
+
+		.long	__pecoff_end - start		@ SizeOfImage
+		.long	start_offset			@ SizeOfHeaders
+		.long	0				@ CheckSum
+		.short	IMAGE_SUBSYSTEM_EFI_APPLICATION	@ Subsystem
+		.short	0				@ DllCharacteristics
+		.long	0				@ SizeOfStackReserve
+		.long	0				@ SizeOfStackCommit
+		.long	0				@ SizeOfHeapReserve
+		.long	0				@ SizeOfHeapCommit
+		.long	0				@ LoaderFlags
+		.long	(section_table - .) / 8		@ NumberOfRvaAndSizes
+
+		.quad	0				@ ExportTable
+		.quad	0				@ ImportTable
+		.quad	0				@ ResourceTable
+		.quad	0				@ ExceptionTable
+		.quad	0				@ CertificationTable
+		.quad	0				@ BaseRelocationTable
+
+section_table:
+		.ascii	".text\0\0\0"
+		.long	__pecoff_code_size		@ VirtualSize
+		.long	__efi_start			@ VirtualAddress
+		.long	__pecoff_code_size		@ SizeOfRawData
+		.long	__efi_start			@ PointerToRawData
+		.long	0				@ PointerToRelocations
+		.long	0				@ PointerToLineNumbers
+		.short	0				@ NumberOfRelocations
+		.short	0				@ NumberOfLineNumbers
+		.long	IMAGE_SCN_CNT_CODE | \
+			IMAGE_SCN_MEM_READ | \
+			IMAGE_SCN_MEM_EXECUTE		@ Characteristics
+
+		.ascii	".data\0\0\0"
+		.long	__pecoff_data_size		@ VirtualSize
+		.long	__pecoff_data_start - start	@ VirtualAddress
+		.long	__pecoff_data_rawsize		@ SizeOfRawData
+		.long	__pecoff_data_start - start	@ PointerToRawData
+		.long	0				@ PointerToRelocations
+		.long	0				@ PointerToLineNumbers
+		.short	0				@ NumberOfRelocations
+		.short	0				@ NumberOfLineNumbers
+		.long	IMAGE_SCN_CNT_INITIALIZED_DATA | \
+			IMAGE_SCN_MEM_READ | \
+			IMAGE_SCN_MEM_WRITE		@ Characteristics
+
+		.set	section_count, (. - section_table) / 40
+
+		.align	12
+__efi_start:
+#endif
+		.endm

linux-7.2.3/arch/arm/boot/compressed/fdt.c

@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt.c"

linux-7.2.3/arch/arm/boot/compressed/fdt_check_mem_start.c

@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/sizes.h>
+#include "misc.h"
+
+static const void *get_prop(const void *fdt, const char *node_path,
+			    const char *property, int minlen)
+{
+	const void *prop;
+	int offset, len;
+
+	offset = fdt_path_offset(fdt, node_path);
+	if (offset < 0)
+		return NULL;
+
+	prop = fdt_getprop(fdt, offset, property, &len);
+	if (!prop || len < minlen)
+		return NULL;
+
+	return prop;
+}
+
+static uint32_t get_cells(const void *fdt, const char *name)
+{
+	const fdt32_t *prop = get_prop(fdt, "/", name, sizeof(fdt32_t));
+
+	if (!prop) {
+		/* default */
+		return 1;
+	}
+
+	return fdt32_ld(prop);
+}
+
+static uint64_t get_val(const fdt32_t *cells, uint32_t ncells)
+{
+	uint64_t r;
+
+	r = fdt32_ld(cells);
+	if (ncells > 1)
+		r = (r << 32) | fdt32_ld(cells + 1);
+
+	return r;
+}
+
+/*
+ * Check the start of physical memory
+ *
+ * Traditionally, the start address of physical memory is obtained by masking
+ * the program counter.  However, this does require that this address is a
+ * multiple of 128 MiB, precluding booting Linux on platforms where this
+ * requirement is not fulfilled.
+ * Hence validate the calculated address against the memory information in the
+ * DTB, and, if out-of-range, replace it by the real start address.
+ * To preserve backwards compatibility (systems reserving a block of memory
+ * at the start of physical memory, kdump, ...), the traditional method is
+ * used if it yields a valid address, unless the "linux,usable-memory-range"
+ * property is present.
+ *
+ * Return value: start address of physical memory to use
+ */
+uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
+{
+	uint32_t addr_cells, size_cells, usable_base, base;
+	uint32_t fdt_mem_start = 0xffffffff;
+	const fdt32_t *usable, *reg, *endp;
+	uint64_t size, usable_end, end;
+	const char *type;
+	int offset, len;
+
+	if (!fdt)
+		return mem_start;
+
+	if (fdt_magic(fdt) != FDT_MAGIC)
+		return mem_start;
+
+	/* There may be multiple cells on LPAE platforms */
+	addr_cells = get_cells(fdt, "#address-cells");
+	size_cells = get_cells(fdt, "#size-cells");
+	if (addr_cells > 2 || size_cells > 2)
+		return mem_start;
+
+	/*
+	 * Usable memory in case of a crash dump kernel
+	 * This property describes a limitation: memory within this range is
+	 * only valid when also described through another mechanism
+	 */
+	usable = get_prop(fdt, "/chosen", "linux,usable-memory-range",
+			  (addr_cells + size_cells) * sizeof(fdt32_t));
+	if (usable) {
+		size = get_val(usable + addr_cells, size_cells);
+		if (!size)
+			return mem_start;
+
+		if (addr_cells > 1 && fdt32_ld(usable)) {
+			/* Outside 32-bit address space */
+			return mem_start;
+		}
+
+		usable_base = fdt32_ld(usable + addr_cells - 1);
+		usable_end = usable_base + size;
+	}
+
+	/* Walk all memory nodes and regions */
+	for (offset = fdt_next_node(fdt, -1, NULL); offset >= 0;
+	     offset = fdt_next_node(fdt, offset, NULL)) {
+		type = fdt_getprop(fdt, offset, "device_type", NULL);
+		if (!type || strcmp(type, "memory"))
+			continue;
+
+		reg = fdt_getprop(fdt, offset, "linux,usable-memory", &len);
+		if (!reg)
+			reg = fdt_getprop(fdt, offset, "reg", &len);
+		if (!reg)
+			continue;
+
+		for (endp = reg + (len / sizeof(fdt32_t));
+		     endp - reg >= addr_cells + size_cells;
+		     reg += addr_cells + size_cells) {
+			size = get_val(reg + addr_cells, size_cells);
+			if (!size)
+				continue;
+
+			if (addr_cells > 1 && fdt32_ld(reg)) {
+				/* Outside 32-bit address space, skipping */
+				continue;
+			}
+
+			base = fdt32_ld(reg + addr_cells - 1);
+			end = base + size;
+			if (usable) {
+				/*
+				 * Clip to usable range, which takes precedence
+				 * over mem_start
+				 */
+				if (base < usable_base)
+					base = usable_base;
+
+				if (end > usable_end)
+					end = usable_end;
+
+				if (end <= base)
+					continue;
+			} else if (mem_start >= base && mem_start < end) {
+				/* Calculated address is valid, use it */
+				return mem_start;
+			}
+
+			if (base < fdt_mem_start)
+				fdt_mem_start = base;
+		}
+	}
+
+	if (fdt_mem_start == 0xffffffff) {
+		/* No usable memory found, falling back to default */
+		return mem_start;
+	}
+
+	/*
+	 * The calculated address is not usable, or was overridden by the
+	 * "linux,usable-memory-range" property.
+	 * Use the lowest usable physical memory address from the DTB instead,
+	 * and make sure this is a multiple of 2 MiB for phys/virt patching.
+	 */
+	return round_up(fdt_mem_start, SZ_2M);
+}

linux-7.2.3/arch/arm/boot/compressed/fdt_ro.c

@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_ro.c"

linux-7.2.3/arch/arm/boot/compressed/fdt_rw.c

@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_rw.c"

linux-7.2.3/arch/arm/boot/compressed/fdt_wip.c

@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_wip.c"

linux-7.2.3/arch/arm/boot/compressed/font.c

@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fonts/font_acorn_8x8.c"

linux-7.2.3/arch/arm/boot/compressed/head-sa1100.S

@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* 
+ * linux/arch/arm/boot/compressed/head-sa1100.S
+ * 
+ * Copyright (C) 1999 Nicolas Pitre <nico@fluxnic.net>
+ * 
+ * SA1100 specific tweaks.  This is merged into head.S by the linker.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+		.section        ".start", "ax"
+		.arch	armv4
+
+__SA1100_start:
+
+		@ Preserve r8/r7 i.e. kernel entry values
+#ifdef CONFIG_SA1100_COLLIE
+		mov	r7, #MACH_TYPE_COLLIE
+#endif
+		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+		ands	r0, r0, #0x0d
+		beq	99f
+
+		@ Data cache might be active.
+		@ Be sure to flush kernel binary out of the cache,
+		@ whatever state it is, before it is turned off.
+		@ This is done by fetching through currently executed
+		@ memory to be sure we hit the same cache.
+		bic	r2, pc, #0x1f
+		add	r3, r2, #0x4000		@ 16 kb is quite enough...
+1:		ldr	r0, [r2], #32
+		teq	r2, r3
+		bne	1b
+		mcr	p15, 0, r0, c7, c10, 4	@ drain WB
+		mcr	p15, 0, r0, c7, c7, 0	@ flush I & D caches
+
+		@ disabling MMU and caches
+		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+		bic	r0, r0, #0x0d		@ clear WB, DC, MMU
+		bic	r0, r0, #0x1000		@ clear Icache
+		mcr	p15, 0, r0, c1, c0, 0
+99:

linux-7.2.3/arch/arm/boot/compressed/head-sharpsl.S

@@ -0,0 +1,151 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * linux/arch/arm/boot/compressed/head-sharpsl.S
+ *
+ * Copyright (C) 2004-2005 Richard Purdie <rpurdie@rpsys.net>
+ *
+ * Sharp's bootloader doesn't pass any kind of machine ID
+ * so we have to figure out the machine for ourselves...
+ *
+ * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750)
+ * Husky (SL-C760), Tosa (SL-C6000), Spitz (SL-C3000),
+ * Akita (SL-C1000) and Borzoi (SL-C3100).
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+#ifndef CONFIG_PXA_SHARPSL
+#error What am I doing here...
+#endif
+
+		.section        ".start", "ax"
+
+__SharpSL_start:
+
+/* Check for TC6393 - if found we have a Tosa */
+	ldr	r7, .TOSAID
+	mov	r1, #0x10000000		@ Base address of TC6393 chip
+	mov 	r6, #0x03
+	ldrh	r3, [r1, #8]		@ Load TC6393XB Revison: This is 0x0003
+	cmp	r6, r3
+	beq	.SHARPEND		@ Success -> tosa
+
+/* Check for pxa270 - if found, branch */
+	mrc p15, 0, r4, c0, c0		@ Get Processor ID
+	and	r4, r4, #0xffffff00
+	ldr	r3, .PXA270ID
+	cmp	r4, r3
+	beq	.PXA270
+
+/* Check for w100 - if not found we have a Poodle */
+	ldr	r1, .W100ADDR		@ Base address of w100 chip + regs offset
+
+	mov r6, #0x31			@ Load Magic Init value
+	str	r6, [r1, #0x280]	@ to SCRATCH_UMSK
+	mov r5, #0x3000
+.W100LOOP:
+	subs r5, r5, #1
+	bne .W100LOOP
+	mov r6, #0x30			@ Load 2nd Magic Init value
+	str	r6, [r1, #0x280]	@ to SCRATCH_UMSK
+
+	ldr	r6, [r1, #0]		@ Load Chip ID
+	ldr	r3, .W100ID
+	ldr	r7, .POODLEID
+	cmp	r6, r3
+	bne	.SHARPEND			@ We have no w100 - Poodle
+
+/* Check for pxa250 - if found we have a Corgi */
+	ldr	r7, .CORGIID
+	ldr	r3, .PXA255ID
+	cmp	r4, r3
+	blo	.SHARPEND			@ We have a PXA250 - Corgi
+
+/* Check for 64MiB flash - if found we have a Shepherd */
+	bl	get_flash_ids
+	ldr	r7, .SHEPHERDID
+	cmp	r3, #0x76			@ 64MiB flash
+	beq	.SHARPEND			@ We have Shepherd
+
+/* Must be a Husky */
+	ldr	r7, .HUSKYID		@ Must be Husky
+	b .SHARPEND
+
+.PXA270:
+/* Check for 16MiB flash - if found we have Spitz */
+	bl	get_flash_ids
+	ldr	r7, .SPITZID
+	cmp	r3, #0x73			@ 16MiB flash
+	beq	.SHARPEND			@ We have Spitz
+
+/* Check for a second SCOOP chip - if found we have Borzoi */
+	ldr	r1, .SCOOP2ADDR
+	ldr	r7, .BORZOIID
+	mov 	r6, #0x0140
+	strh	r6, [r1]
+	ldrh	r6, [r1]
+	cmp	r6, #0x0140
+	beq	.SHARPEND			@ We have Borzoi
+
+/* Must be Akita */
+	ldr	r7, .AKITAID
+	b	.SHARPEND			@ We have Borzoi
+
+.PXA255ID:
+	.word	0x69052d00		@ PXA255 Processor ID
+.PXA270ID:
+	.word	0x69054100		@ PXA270 Processor ID
+.W100ID:
+	.word	0x57411002		@ w100 Chip ID
+.W100ADDR:
+	.word 	0x08010000		@ w100 Chip ID Reg Address
+.SCOOP2ADDR:
+	.word	0x08800040
+.POODLEID:
+	.word	MACH_TYPE_POODLE
+.CORGIID:
+	.word	MACH_TYPE_CORGI
+.SHEPHERDID:
+	.word	MACH_TYPE_SHEPHERD
+.HUSKYID:
+	.word	MACH_TYPE_HUSKY
+.TOSAID:
+	.word	MACH_TYPE_TOSA
+.SPITZID:
+	.word	MACH_TYPE_SPITZ
+.AKITAID:
+	.word	MACH_TYPE_AKITA
+.BORZOIID:
+	.word	MACH_TYPE_BORZOI
+
+/*
+ * Return: r2 - NAND Manufacturer ID
+ *         r3 - NAND Chip ID
+ * Corrupts: r1
+ */
+get_flash_ids:
+	mov	r1, #0x0c000000		@ Base address of NAND chip
+	ldrb	r3, [r1, #24]		@ Load FLASHCTL
+	bic	r3, r3, #0x11		@ SET NCE
+	orr	r3, r3, #0x0a		@ SET CLR + FLWP
+	strb	r3, [r1, #24]		@ Save to FLASHCTL
+	mov 	r2, #0x90		@ Command "readid"
+	strb	r2, [r1, #20]		@ Save to FLASHIO
+	bic	r3, r3, #2		@ CLR CLE
+	orr	r3, r3, #4		@ SET ALE
+	strb	r3, [r1, #24]		@ Save to FLASHCTL
+	mov	r2, #0			@ Address 0x00
+	strb	r2, [r1, #20]		@ Save to FLASHIO
+	bic	r3, r3, #4		@ CLR ALE
+	strb	r3, [r1, #24]		@ Save to FLASHCTL
+.fids1:
+	ldrb	r3, [r1, #24]		@ Load FLASHCTL
+	tst	r3, #32			@ Is chip ready?
+	beq	.fids1
+	ldrb	r2, [r1, #20]		@ NAND Manufacturer ID
+	ldrb	r3, [r1, #20]		@ NAND Chip ID
+	mov	pc, lr
+
+.SHARPEND:

linux-7.2.3/arch/arm/boot/compressed/head-xscale.S

@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * linux/arch/arm/boot/compressed/head-xscale.S
+ *
+ * XScale specific tweaks.  This is merged into head.S by the linker.
+ *
+ */
+
+#include <linux/linkage.h>
+
+		.section        ".start", "ax"
+
+__XScale_start:
+
+		@ Preserve r8/r7 i.e. kernel entry values
+
+		@ Data cache might be active.
+		@ Be sure to flush kernel binary out of the cache,
+		@ whatever state it is, before it is turned off.
+		@ This is done by fetching through currently executed
+		@ memory to be sure we hit the same cache.
+		bic	r2, pc, #0x1f
+		add	r3, r2, #0x10000	@ 64 kb is quite enough...
+1:		ldr	r0, [r2], #32
+		teq	r2, r3
+		bne	1b
+		mcr	p15, 0, r0, c7, c10, 4	@ drain WB
+		mcr	p15, 0, r0, c7, c7, 0	@ flush I & D caches
+
+		@ disabling MMU and caches
+		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+		bic	r0, r0, #0x05		@ clear DC, MMU
+		bic	r0, r0, #0x1000		@ clear Icache
+		mcr	p15, 0, r0, c1, c0, 0
+

linux-7.2.3/arch/arm/boot/compressed/hyp-stub.S

@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#include "../../kernel/hyp-stub.S"

linux-7.2.3/arch/arm/boot/compressed/lib1funcs.S

@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __aeabi_uidivmod */
+#include "../../lib/lib1funcs.S"

linux-7.2.3/arch/arm/boot/compressed/ll_char_wr.S

@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  linux/arch/arm/lib/ll_char_wr.S
+ *
+ *  Copyright (C) 1995, 1996 Russell King.
+ *
+ *  Speedups & 1bpp code (C) 1996 Philip Blundell & Russell King.
+ *
+ *  10-04-96	RMK	Various cleanups & reduced register usage.
+ *  08-04-98	RMK	Shifts re-ordered
+ */
+
+@ Regs: [] = corruptible
+@       {} = used
+@       () = do not use
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+	.text
+
+LC0:	.word	LC0
+	.word	bytes_per_char_h
+	.word	video_size_row
+	.word	acorndata_8x8
+	.word	con_charconvtable
+
+/*
+ * r0 = ptr
+ * r1 = char
+ * r2 = white
+ */
+ENTRY(ll_write_char)
+	stmfd	sp!, {r4 - r7, lr}
+@
+@ Smashable regs: {r0 - r3}, [r4 - r7], (r8 - fp), [ip], (sp), [lr], (pc)
+@
+	/*
+	 * calculate offset into character table
+	 */
+	mov	r1, r1, lsl #3
+	/*
+	 * calculate offset required for each row.
+	 */
+	adr	ip, LC0
+	ldmia	ip, {r3, r4, r5, r6, lr}
+	sub	ip, ip, r3
+	add	r6, r6, ip
+	add	lr, lr, ip
+	ldr	r4, [r4, ip]
+	ldr	r5, [r5, ip]
+	/*
+	 * Go to resolution-dependent routine...
+	 */
+	cmp	r4, #4
+	blt	Lrow1bpp
+	add	r0, r0, r5, lsl #3		@ Move to bottom of character
+	orr	r1, r1, #7
+	ldrb	r7, [r6, r1]
+	teq	r4, #8
+	beq	Lrow8bpplp
+@
+@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
+@
+Lrow4bpplp:
+	ldr	r7, [lr, r7, lsl #2]
+	mul	r7, r2, r7
+	sub	r1, r1, #1			@ avoid using r7 directly after
+	str	r7, [r0, -r5]!
+	ldrb	r7, [r6, r1]
+	ldr	r7, [lr, r7, lsl #2]
+	mul	r7, r2, r7
+	tst	r1, #7				@ avoid using r7 directly after
+	str	r7, [r0, -r5]!
+	subne	r1, r1, #1
+	ldrbne	r7, [r6, r1]
+	bne	Lrow4bpplp
+	ldmfd	sp!, {r4 - r7, pc}
+
+@
+@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
+@
+Lrow8bpplp:
+	mov	ip, r7, lsr #4
+	ldr	ip, [lr, ip, lsl #2]
+	mul	r4, r2, ip
+	and	ip, r7, #15			@ avoid r4
+	ldr	ip, [lr, ip, lsl #2]		@ avoid r4
+	mul	ip, r2, ip			@ avoid r4
+	sub	r1, r1, #1			@ avoid ip
+	sub	r0, r0, r5			@ avoid ip
+	stmia	r0, {r4, ip}
+	ldrb	r7, [r6, r1]
+	mov	ip, r7, lsr #4
+	ldr	ip, [lr, ip, lsl #2]
+	mul	r4, r2, ip
+	and	ip, r7, #15			@ avoid r4
+	ldr	ip, [lr, ip, lsl #2]		@ avoid r4
+	mul	ip, r2, ip			@ avoid r4
+	tst	r1, #7				@ avoid ip
+	sub	r0, r0, r5			@ avoid ip
+	stmia	r0, {r4, ip}
+	subne	r1, r1, #1
+	ldrbne	r7, [r6, r1]
+	bne	Lrow8bpplp
+	ldmfd	sp!, {r4 - r7, pc}
+
+@
+@ Smashable regs: {r0 - r3}, [r4], {r5, r6}, [r7], (r8 - fp), [ip], (sp), [lr], (pc)
+@
+Lrow1bpp:
+	add	r6, r6, r1
+	ldmia	r6, {r4, r7}
+	strb	r4, [r0], r5
+	mov	r4, r4, lsr #8
+	strb	r4, [r0], r5
+	mov	r4, r4, lsr #8
+	strb	r4, [r0], r5
+	mov	r4, r4, lsr #8
+	strb	r4, [r0], r5
+	strb	r7, [r0], r5
+	mov	r7, r7, lsr #8
+	strb	r7, [r0], r5
+	mov	r7, r7, lsr #8
+	strb	r7, [r0], r5
+	mov	r7, r7, lsr #8
+	strb	r7, [r0], r5
+	ldmfd	sp!, {r4 - r7, pc}
+
+	.bss
+ENTRY(con_charconvtable)
+	.space	1024

linux-7.2.3/arch/arm/boot/compressed/misc-ep93xx.h

@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ */
+
+/*
+ * These machine IDs are no longer used by the kernel since EP93xx was converted
+ * to DT booting, but they are still passed in by bootloaders, so we use our own
+ * local definitions of the relevant macros.
+ */
+#define machine_is_bk3()		(__machine_arch_type == 1880)
+#define machine_is_edb9301()		(__machine_arch_type == 462)
+#define machine_is_edb9302a()		(__machine_arch_type == 1127)
+#define machine_is_edb9302()		(__machine_arch_type == 538)
+#define machine_is_edb9307a()		(__machine_arch_type == 1128)
+#define machine_is_edb9307()		(__machine_arch_type == 607)
+#define machine_is_edb9312()		(__machine_arch_type == 451)
+#define machine_is_edb9315a()		(__machine_arch_type == 772)
+#define machine_is_edb9315()		(__machine_arch_type == 463)
+#define machine_is_ts72xx()		(__machine_arch_type == 673)
+#define machine_is_vision_ep9307()	(__machine_arch_type == 1578)
+
+static inline unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
+static inline void __raw_writeb(unsigned char value, unsigned int ptr)
+{
+	*((volatile unsigned char *)ptr) = value;
+}
+
+static inline void __raw_writel(unsigned int value, unsigned int ptr)
+{
+	*((volatile unsigned int *)ptr) = value;
+}
+
+/*
+ * Some bootloaders don't turn off DMA from the ethernet MAC before
+ * jumping to linux, which means that we might end up with bits of RX
+ * status and packet data scribbled over the uncompressed kernel image.
+ * Work around this by resetting the ethernet MAC before we uncompress.
+ */
+#define PHYS_ETH_SELF_CTL		0x80010020
+#define ETH_SELF_CTL_RESET		0x00000001
+
+static inline void ep93xx_ethernet_reset(void)
+{
+	unsigned int v;
+
+	/* Reset the ethernet MAC.  */
+	v = __raw_readl(PHYS_ETH_SELF_CTL);
+	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
+
+	/* Wait for reset to finish.  */
+	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
+		;
+}
+
+#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
+#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
+#define TS72XX_WDT_FEED_VAL		0x05
+
+static inline void __maybe_unused ts72xx_watchdog_disable(void)
+{
+	__raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE);
+	__raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE);
+}
+
+static inline void ep93xx_decomp_setup(void)
+{
+	if (machine_is_ts72xx())
+		ts72xx_watchdog_disable();
+
+	if (machine_is_edb9301() ||
+	    machine_is_edb9302() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9307() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9312() ||
+	    machine_is_edb9315() ||
+	    machine_is_edb9315a() ||
+	    machine_is_ts72xx() ||
+	    machine_is_bk3() ||
+	    machine_is_vision_ep9307())
+		ep93xx_ethernet_reset();
+}

linux-7.2.3/arch/arm/boot/compressed/misc.c

@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * misc.c
+ * 
+ * This is a collection of several routines from gzip-1.0.3 
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ *
+ * Modified for ARM Linux by Russell King
+ *
+ * Nicolas Pitre <nico@visuaide.com>  1999/04/14 :
+ *  For this code to run directly from Flash, all constant variables must
+ *  be marked with 'const' and all other variables initialized at run-time 
+ *  only.  This way all non constant variables will end up in the bss segment,
+ *  which should point to addresses in RAM and cleared to 0 on start.
+ *  This allows for a much quicker boot time.
+ */
+
+unsigned int __machine_arch_type;
+
+#include <linux/compiler.h>	/* for inline */
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include "misc.h"
+#ifdef CONFIG_ARCH_EP93XX
+#include "misc-ep93xx.h"
+#endif
+
+static void putstr(const char *ptr);
+
+#include CONFIG_UNCOMPRESS_INCLUDE
+
+#ifdef CONFIG_DEBUG_ICEDCC
+
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
+
+static void icedcc_putc(int ch)
+{
+	int status, i = 0x4000000;
+
+	do {
+		if (--i < 0)
+			return;
+
+		asm volatile ("mrc p14, 0, %0, c0, c1, 0" : "=r" (status));
+	} while (status & (1 << 29));
+
+	asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
+}
+
+
+#elif defined(CONFIG_CPU_XSCALE)
+
+static void icedcc_putc(int ch)
+{
+	int status, i = 0x4000000;
+
+	do {
+		if (--i < 0)
+			return;
+
+		asm volatile ("mrc p14, 0, %0, c14, c0, 0" : "=r" (status));
+	} while (status & (1 << 28));
+
+	asm("mcr p14, 0, %0, c8, c0, 0" : : "r" (ch));
+}
+
+#else
+
+static void icedcc_putc(int ch)
+{
+	int status, i = 0x4000000;
+
+	do {
+		if (--i < 0)
+			return;
+
+		asm volatile ("mrc p14, 0, %0, c0, c0, 0" : "=r" (status));
+	} while (status & 2);
+
+	asm("mcr p14, 0, %0, c1, c0, 0" : : "r" (ch));
+}
+
+#endif
+
+#define putc(ch)	icedcc_putc(ch)
+#endif
+
+static void putstr(const char *ptr)
+{
+	char c;
+
+	while ((c = *ptr++) != '\0') {
+		if (c == '\n')
+			putc('\r');
+		putc(c);
+	}
+
+	flush();
+}
+
+/*
+ * gzip declarations
+ */
+unsigned char *output_data;
+
+unsigned long free_mem_ptr;
+unsigned long free_mem_end_ptr;
+
+#ifndef arch_error
+#define arch_error(x)
+#endif
+
+void error(char *x)
+{
+	arch_error(x);
+
+	putstr("\n\n");
+	putstr(x);
+	putstr("\n\n -- System halted");
+
+	while(1);	/* Halt */
+}
+
+asmlinkage void __div0(void)
+{
+	error("Attempting division by 0!");
+}
+
+void
+decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
+		unsigned long free_mem_ptr_end_p,
+		int arch_id)
+{
+	int ret;
+
+	output_data		= (unsigned char *)output_start;
+	free_mem_ptr		= free_mem_ptr_p;
+	free_mem_end_ptr	= free_mem_ptr_end_p;
+	__machine_arch_type	= arch_id;
+
+#ifdef CONFIG_ARCH_EP93XX
+	ep93xx_decomp_setup();
+#endif
+	arch_decomp_setup();
+
+	putstr("Uncompressing Linux...");
+	ret = do_decompress(input_data, input_data_end - input_data,
+			    output_data, error);
+	if (ret)
+		error("decompressor returned an error");
+	else
+		putstr(" done, booting the kernel.\n");
+}
+
+void __fortify_panic(const u8 reason, size_t avail, size_t size)
+{
+	error("detected buffer overflow");
+}

linux-7.2.3/arch/arm/boot/compressed/misc.h

@@ -0,0 +1,21 @@
+#ifndef MISC_H
+#define MISC_H
+
+#include <linux/compiler.h>
+
+void error(char *x) __noreturn;
+extern unsigned long free_mem_ptr;
+extern unsigned long free_mem_end_ptr;
+void __div0(void);
+void
+decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
+		  unsigned long free_mem_ptr_end_p, int arch_id);
+void __fortify_panic(const u8 reason, size_t avail, size_t size);
+int atags_to_fdt(void *atag_list, void *fdt, int total_space);
+uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt);
+int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
+
+extern char input_data[];
+extern char input_data_end[];
+
+#endif

linux-7.2.3/arch/arm/boot/compressed/piggy.S

@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+	.section .piggydata, "a"
+	.globl	input_data
+input_data:
+	.incbin	"arch/arm/boot/compressed/piggy_data"
+	.globl	input_data_end
+input_data_end:

linux-7.2.3/arch/arm/boot/compressed/string.c

@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/arm/boot/compressed/string.c
+ *
+ * Small subset of simple string routines
+ */
+
+#define __NO_FORTIFY
+#include <linux/string.h>
+
+/*
+ * The decompressor is built without KASan but uses the same redirects as the
+ * rest of the kernel when CONFIG_KASAN is enabled, defining e.g. memcpy()
+ * to __memcpy() but since we are not linking with the main kernel string
+ * library in the decompressor, that will lead to link failures.
+ *
+ * Undefine KASan's versions, define the wrapped functions and alias them to
+ * the right names so that when e.g. __memcpy() appear in the code, it will
+ * still be linked to this local version of memcpy().
+ */
+#ifdef CONFIG_KASAN
+#undef memcpy
+#undef memmove
+#undef memset
+void *__memcpy(void *__dest, __const void *__src, size_t __n) __alias(memcpy);
+void *__memmove(void *__dest, __const void *__src, size_t count) __alias(memmove);
+void *__memset(void *s, int c, size_t count) __alias(memset);
+#endif
+
+void *memcpy(void *__dest, __const void *__src, size_t __n)
+{
+	int i = 0;
+	unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
+
+	for (i = __n >> 3; i > 0; i--) {
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+	}
+
+	if (__n & 1 << 2) {
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+	}
+
+	if (__n & 1 << 1) {
+		*d++ = *s++;
+		*d++ = *s++;
+	}
+
+	if (__n & 1)
+		*d++ = *s++;
+
+	return __dest;
+}
+
+void *memmove(void *__dest, __const void *__src, size_t count)
+{
+	unsigned char *d = __dest;
+	const unsigned char *s = __src;
+
+	if (__dest == __src)
+		return __dest;
+
+	if (__dest < __src)
+		return memcpy(__dest, __src, count);
+
+	while (count--)
+		d[count] = s[count];
+	return __dest;
+}
+
+size_t strlen(const char *s)
+{
+	const char *sc = s;
+
+	while (*sc != '\0')
+		sc++;
+	return sc - s;
+}
+
+size_t strnlen(const char *s, size_t count)
+{
+	const char *sc;
+
+	for (sc = s; count-- && *sc != '\0'; ++sc)
+		/* nothing */;
+	return sc - s;
+}
+
+int memcmp(const void *cs, const void *ct, size_t count)
+{
+	const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count;
+	int res = 0;
+
+	while (su1 < end) {
+		res = *su1++ - *su2++;
+		if (res)
+			break;
+	}
+	return res;
+}
+
+int strcmp(const char *cs, const char *ct)
+{
+	unsigned char c1, c2;
+	int res = 0;
+
+	do {
+		c1 = *cs++;
+		c2 = *ct++;
+		res = c1 - c2;
+		if (res)
+			break;
+	} while (c1);
+	return res;
+}
+
+void *memchr(const void *s, int c, size_t count)
+{
+	const unsigned char *p = s;
+
+	while (count--)
+		if ((unsigned char)c == *p++)
+			return (void *)(p - 1);
+	return NULL;
+}
+
+char *strchr(const char *s, int c)
+{
+	while (*s != (char)c)
+		if (*s++ == '\0')
+			return NULL;
+	return (char *)s;
+}
+
+char *strrchr(const char *s, int c)
+{
+	const char *last = NULL;
+	do {
+		if (*s == (char)c)
+			last = s;
+	} while (*s++);
+	return (char *)last;
+}
+
+#undef memset
+
+void *memset(void *s, int c, size_t count)
+{
+	char *xs = s;
+	while (count--)
+		*xs++ = c;
+	return s;
+}

linux-7.2.3/arch/arm/boot/compressed/vmlinux.lds.S

@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  Copyright (C) 2000 Russell King
+ */
+#include <asm/vmlinux.lds.h>
+
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define ZIMAGE_MAGIC(x) ( (((x) >> 24) & 0x000000ff) | \
+			  (((x) >>  8) & 0x0000ff00) | \
+			  (((x) <<  8) & 0x00ff0000) | \
+			  (((x) << 24) & 0xff000000) )
+#else
+#define ZIMAGE_MAGIC(x) (x)
+#endif
+
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+  /DISCARD/ : {
+    COMMON_DISCARDS
+    *(.ARM.exidx*)
+    *(.ARM.extab*)
+    *(.modinfo)
+    *(.note.*)
+    *(.rel.*)
+    *(.printk_index)
+    /*
+     * Discard any r/w data - this produces a link error if we have any,
+     * which is required for PIC decompression.  Local data generates
+     * GOTOFF relocations, which prevents it being relocated independently
+     * of the text/got segments.
+     */
+    *(.data)
+  }
+
+  . = TEXT_START;
+  _text = .;
+
+  .text : {
+    _start = .;
+    *(.start)
+    *(.text)
+    *(.text.*)
+    ARM_STUBS_TEXT
+  }
+  .table : ALIGN(4) {
+    _table_start = .;
+    LONG(ZIMAGE_MAGIC(6))
+    LONG(ZIMAGE_MAGIC(0x5a534c4b))
+    LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start))
+    LONG(ZIMAGE_MAGIC(_kernel_bss_size))
+    LONG(ZIMAGE_MAGIC(TEXT_OFFSET))
+    LONG(ZIMAGE_MAGIC(MALLOC_SIZE))
+    LONG(0)
+    _table_end = .;
+  }
+  .rodata : {
+    *(.rodata)
+    *(.rodata.*)
+    *(.data.rel.ro)
+    *(.data.rel.ro.*)
+  }
+  .piggydata : {
+    *(.piggydata)
+    __piggy_size_addr = . - 4;
+  }
+
+  . = ALIGN(4);
+  _etext = .;
+
+  .got.plt		: { *(.got.plt) }
+#ifndef CONFIG_EFI_STUB
+  _got_start = .;
+  .got			: { *(.got) }
+  _got_end = .;
+#endif
+
+  /* ensure the zImage file size is always a multiple of 64 bits */
+  /* (without a dummy byte, ld just ignores the empty section) */
+  .pad			: { BYTE(0); . = ALIGN(8); }
+
+#ifdef CONFIG_EFI_STUB
+  .data : ALIGN(4096) {
+    __pecoff_data_start = .;
+    _got_start = .;
+    *(.got)
+    _got_end = .;
+    /*
+     * The EFI stub always executes from RAM, and runs strictly before the
+     * decompressor, so we can make an exception for its r/w data, and keep it
+     */
+    *(.data.efistub .bss.efistub)
+    __pecoff_data_end = .;
+
+    /*
+     * PE/COFF mandates a file size which is a multiple of 512 bytes if the
+     * section size equals or exceeds 4 KB
+     */
+    . = ALIGN(512);
+  }
+  __pecoff_data_rawsize = . - ADDR(.data);
+#endif
+
+  _edata = .;
+
+  /*
+   * The image_end section appears after any additional loadable sections
+   * that the linker may decide to insert in the binary image.  Having
+   * this symbol allows further debug in the near future.
+   */
+  .image_end (NOLOAD) : {
+    /*
+     * EFI requires that the image is aligned to 512 bytes, and appended
+     * DTB requires that we know where the end of the image is.  Ensure
+     * that both are satisfied by ensuring that there are no additional
+     * sections emitted into the decompressor image.
+     */
+    _edata_real = .;
+  }
+
+  _magic_sig = ZIMAGE_MAGIC(0x016f2818);
+  _magic_start = ZIMAGE_MAGIC(_start);
+  _magic_end = ZIMAGE_MAGIC(_edata);
+  _magic_table = ZIMAGE_MAGIC(_table_start - _start);
+
+  . = BSS_START;
+  __bss_start = .;
+  .bss			: { *(.bss .bss.*) }
+  _end = .;
+
+  . = ALIGN(8);		/* the stack must be 64-bit aligned */
+  .stack		: { *(.stack) }
+
+  PROVIDE(__pecoff_data_size = ALIGN(512) - ADDR(.data));
+  PROVIDE(__pecoff_end = ALIGN(512));
+
+  STABS_DEBUG
+  DWARF_DEBUG
+  ARM_DETAILS
+
+  ARM_ASSERTS
+}
+ASSERT(_edata_real == _edata, "error: zImage file size is incorrect");