Resguardo inicial

linux-7.2.3/arch/arm/mach-exynos/Kconfig

@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+
+# Configuration options for the Samsung Exynos
+
+menuconfig ARCH_EXYNOS
+	bool "Samsung Exynos"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select EXYNOS_IRQ_COMBINER
+	select COMMON_CLK_SAMSUNG
+	select EXYNOS_THERMAL
+	select EXYNOS_PMU
+	select EXYNOS_SROM
+	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
+	select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5
+	select HAVE_ARM_SCU if SMP
+	select PINCTRL
+	select PINCTRL_EXYNOS
+	select PM_GENERIC_DOMAINS if PM
+	select S5P_DEV_MFC
+	select SAMSUNG_MC
+	select SOC_SAMSUNG
+	select SRAM
+	select THERMAL
+	select THERMAL_OF
+	select MFD_SYSCON
+	select MEMORY
+	select CLKSRC_EXYNOS_MCT
+	select POWER_RESET
+	select POWER_RESET_SYSCON
+	select POWER_RESET_SYSCON_POWEROFF
+	help
+	  Support for Samsung Exynos SoCs
+
+if ARCH_EXYNOS
+
+config S5P_DEV_MFC
+	bool
+	help
+	  Compile in setup memory (init) code for MFC
+
+config ARCH_EXYNOS3
+	bool "Samsung Exynos3"
+	default y
+	select ARM_CPU_SUSPEND if PM
+	help
+	  Samsung Exynos3 (Cortex-A7) SoC based systems
+
+config ARCH_EXYNOS4
+	bool "Samsung Exynos4"
+	default y
+	select ARM_CPU_SUSPEND if PM_SLEEP
+	select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
+	select CPU_EXYNOS4210
+	select GIC_NON_BANKED
+	help
+	  Samsung Exynos4 (Cortex-A9) SoC based systems
+
+config ARCH_EXYNOS5
+	bool "Samsung Exynos5"
+	default y
+	help
+	  Samsung Exynos5 (Cortex-A15/A7) SoC based systems
+
+comment "Exynos SoCs"
+
+config SOC_EXYNOS3250
+	bool "Samsung Exynos3250"
+	default y
+	depends on ARCH_EXYNOS3
+
+config CPU_EXYNOS4210
+	bool "Samsung Exynos4210"
+	default y
+	depends on ARCH_EXYNOS4
+
+config SOC_EXYNOS4212
+	bool "Samsung Exynos4212"
+	default y
+	depends on ARCH_EXYNOS4
+
+config SOC_EXYNOS4412
+	bool "Samsung Exynos4412"
+	default y
+	depends on ARCH_EXYNOS4
+
+config SOC_EXYNOS5250
+	bool "Samsung Exynos5250"
+	default y
+	depends on ARCH_EXYNOS5
+
+config SOC_EXYNOS5260
+	bool "Samsung Exynos5260"
+	default y
+	depends on ARCH_EXYNOS5
+
+config SOC_EXYNOS5410
+	bool "Samsung Exynos5410"
+	default y
+	depends on ARCH_EXYNOS5
+
+config SOC_EXYNOS5420
+	bool "Samsung Exynos5420"
+	default y
+	depends on ARCH_EXYNOS5
+	select EXYNOS_MCPM if SMP
+	select ARM_CCI400_PORT_CTRL
+	select ARM_CPU_SUSPEND
+
+config SOC_EXYNOS5800
+	bool "Samsung EXYNOS5800"
+	default y
+	depends on SOC_EXYNOS5420
+	select EXYNOS_REGULATOR_COUPLER
+
+config EXYNOS_MCPM
+	bool
+	select MCPM
+
+config EXYNOS_CPU_SUSPEND
+	bool
+	select ARM_CPU_SUSPEND
+	default PM_SLEEP || ARM_EXYNOS_CPUIDLE
+
+endif

linux-7.2.3/arch/arm/mach-exynos/Makefile

@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+
+obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o exynos-smc.o firmware.o
+
+obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
+obj-$(CONFIG_PM_SLEEP)		+= suspend.o
+
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+
+obj-$(CONFIG_EXYNOS_MCPM)	+= mcpm-exynos.o
+CFLAGS_mcpm-exynos.o		+= -march=armv7-a

linux-7.2.3/arch/arm/mach-exynos/common.h

@@ -0,0 +1,173 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for Exynos machines
+ */
+
+#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
+#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
+
+#include <linux/platform_data/cpuidle-exynos.h>
+
+#define EXYNOS3250_SOC_ID	0xE3472000
+#define EXYNOS3_SOC_MASK	0xFFFFF000
+
+#define EXYNOS4210_CPU_ID	0x43210000
+#define EXYNOS4212_CPU_ID	0x43220000
+#define EXYNOS4412_CPU_ID	0xE4412200
+#define EXYNOS4_CPU_MASK	0xFFFE0000
+
+#define EXYNOS5250_SOC_ID	0x43520000
+#define EXYNOS5410_SOC_ID	0xE5410000
+#define EXYNOS5420_SOC_ID	0xE5420000
+#define EXYNOS5800_SOC_ID	0xE5422000
+#define EXYNOS5_SOC_MASK	0xFFFFF000
+
+extern unsigned long exynos_cpu_id;
+
+#define IS_SAMSUNG_CPU(name, id, mask)		\
+static inline int is_samsung_##name(void)	\
+{						\
+	return ((exynos_cpu_id & mask) == (id & mask));	\
+}
+
+IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
+IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
+
+#if defined(CONFIG_SOC_EXYNOS3250)
+# define soc_is_exynos3250()	is_samsung_exynos3250()
+#else
+# define soc_is_exynos3250()	0
+#endif
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+# define soc_is_exynos4210()	is_samsung_exynos4210()
+#else
+# define soc_is_exynos4210()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212()	is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4412)
+# define soc_is_exynos4412()	is_samsung_exynos4412()
+#else
+# define soc_is_exynos4412()	0
+#endif
+
+#define EXYNOS4210_REV_0	(0x0)
+#define EXYNOS4210_REV_1_0	(0x10)
+#define EXYNOS4210_REV_1_1	(0x11)
+
+#if defined(CONFIG_SOC_EXYNOS5250)
+# define soc_is_exynos5250()	is_samsung_exynos5250()
+#else
+# define soc_is_exynos5250()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5410)
+# define soc_is_exynos5410()	is_samsung_exynos5410()
+#else
+# define soc_is_exynos5410()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5420)
+# define soc_is_exynos5420()	is_samsung_exynos5420()
+#else
+# define soc_is_exynos5420()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5800)
+# define soc_is_exynos5800()	is_samsung_exynos5800()
+#else
+# define soc_is_exynos5800()	0
+#endif
+
+extern u32 cp15_save_diag;
+extern u32 cp15_save_power;
+
+extern void __iomem *sysram_ns_base_addr;
+extern void __iomem *sysram_base_addr;
+extern phys_addr_t sysram_base_phys;
+extern void __iomem *pmu_base_addr;
+void exynos_sysram_init(void);
+
+enum {
+	FW_DO_IDLE_SLEEP,
+	FW_DO_IDLE_AFTR,
+};
+
+void exynos_firmware_init(void);
+
+/* CPU BOOT mode flag for Exynos3250 SoC bootloader */
+#define C2_STATE	(1 << 3)
+/*
+ * Magic values for bootloader indicating chosen low power mode.
+ * See also Documentation/arch/arm/samsung/bootloader-interface.rst
+ */
+#define EXYNOS_SLEEP_MAGIC	0x00000bad
+#define EXYNOS_AFTR_MAGIC	0xfcba0d10
+
+bool __init exynos_secure_firmware_available(void);
+void exynos_set_boot_flag(unsigned int cpu, unsigned int mode);
+void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode);
+
+#ifdef CONFIG_PM_SLEEP
+extern void __init exynos_pm_init(void);
+#else
+static inline void exynos_pm_init(void) {}
+#endif
+
+extern void exynos_cpu_resume(void);
+extern void exynos_cpu_resume_ns(void);
+
+extern const struct smp_operations exynos_smp_ops;
+
+extern void exynos_cpu_power_down(int cpu);
+extern void exynos_cpu_power_up(int cpu);
+extern int  exynos_cpu_power_state(int cpu);
+extern void exynos_cluster_power_down(int cluster);
+extern void exynos_cluster_power_up(int cluster);
+extern int  exynos_cluster_power_state(int cluster);
+extern void exynos_cpu_save_register(void);
+extern void exynos_cpu_restore_register(void);
+extern void exynos_pm_central_suspend(void);
+extern int exynos_pm_central_resume(void);
+extern void exynos_enter_aftr(void);
+#ifdef CONFIG_SMP
+extern void exynos_scu_enable(void);
+#else
+static inline void exynos_scu_enable(void) { }
+#endif
+
+extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
+
+extern void exynos_set_delayed_reset_assertion(bool enable);
+
+extern unsigned int exynos_rev(void);
+extern void exynos_core_restart(u32 core_id);
+extern int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr);
+extern int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr);
+
+static inline void pmu_raw_writel(u32 val, u32 offset)
+{
+	writel_relaxed(val, pmu_base_addr + offset);
+}
+
+static inline u32 pmu_raw_readl(u32 offset)
+{
+	return readl_relaxed(pmu_base_addr + offset);
+}
+
+#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */

linux-7.2.3/arch/arm/mach-exynos/exynos-smc.S

@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 Samsung Electronics.
+ *
+ * Copied from omap-smc.S Copyright (C) 2010 Texas Instruments, Inc.
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * Function signature: void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3)
+ */
+	.arch armv7-a
+	.arch_extension sec
+ENTRY(exynos_smc)
+	stmfd	sp!, {r4-r11, lr}
+	dsb
+	smc	#0
+	ldmfd	sp!, {r4-r11, pc}
+ENDPROC(exynos_smc)

linux-7.2.3/arch/arm/mach-exynos/exynos.c

@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Samsung Exynos Flattened Device Tree enabled machine
+//
+// Copyright (c) 2010-2014 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/platform_device.h>
+#include <linux/irqchip.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+
+#define S3C_ADDR_BASE	0xF6000000
+#define S3C_ADDR(x)	((void __iomem __force *)S3C_ADDR_BASE + (x))
+#define S5P_VA_CHIPID	S3C_ADDR(0x02000000)
+
+static struct platform_device exynos_cpuidle = {
+	.name              = "exynos_cpuidle",
+#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
+	.dev.platform_data = exynos_enter_aftr,
+#endif
+	.id                = -1,
+};
+
+void __iomem *sysram_base_addr __ro_after_init;
+phys_addr_t sysram_base_phys __ro_after_init;
+void __iomem *sysram_ns_base_addr __ro_after_init;
+
+unsigned long exynos_cpu_id;
+static unsigned int exynos_cpu_rev;
+
+unsigned int exynos_rev(void)
+{
+	return exynos_cpu_rev;
+}
+
+void __init exynos_sysram_init(void)
+{
+	for_each_compatible_node_scoped(node, NULL, "samsung,exynos4210-sysram") {
+		struct resource res;
+		if (!of_device_is_available(node))
+			continue;
+
+		of_address_to_resource(node, 0, &res);
+		sysram_base_addr = ioremap(res.start, resource_size(&res));
+		sysram_base_phys = res.start;
+		break;
+	}
+
+	for_each_compatible_node_scoped(node, NULL, "samsung,exynos4210-sysram-ns") {
+		if (!of_device_is_available(node))
+			continue;
+		sysram_ns_base_addr = of_iomap(node, 0);
+		break;
+	}
+}
+
+static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
+					int depth, void *data)
+{
+	struct map_desc iodesc;
+	const __be32 *reg;
+	int len;
+
+	if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid"))
+		return 0;
+
+	reg = of_get_flat_dt_prop(node, "reg", &len);
+	if (reg == NULL || len != (sizeof(unsigned long) * 2))
+		return 0;
+
+	iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0]));
+	iodesc.length = be32_to_cpu(reg[1]) - 1;
+	iodesc.virtual = (unsigned long)S5P_VA_CHIPID;
+	iodesc.type = MT_DEVICE;
+	iotable_init(&iodesc, 1);
+	return 1;
+}
+
+static void __init exynos_init_io(void)
+{
+	debug_ll_io_init();
+
+	of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
+
+	/* detect cpu id and rev. */
+	exynos_cpu_id = readl_relaxed(S5P_VA_CHIPID);
+	exynos_cpu_rev = exynos_cpu_id & 0xFF;
+
+	pr_info("Samsung CPU ID: 0x%08lx\n", exynos_cpu_id);
+
+}
+
+/*
+ * Set or clear the USE_DELAYED_RESET_ASSERTION option. Used by smp code
+ * and suspend.
+ *
+ * This is necessary only on Exynos4 SoCs. When system is running
+ * USE_DELAYED_RESET_ASSERTION should be set so the ARM CLK clock down
+ * feature could properly detect global idle state when secondary CPU is
+ * powered down.
+ *
+ * However this should not be set when such system is going into suspend.
+ */
+void exynos_set_delayed_reset_assertion(bool enable)
+{
+	if (of_machine_is_compatible("samsung,exynos4")) {
+		unsigned int tmp, core_id;
+
+		for (core_id = 0; core_id < num_possible_cpus(); core_id++) {
+			tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id));
+			if (enable)
+				tmp |= S5P_USE_DELAYED_RESET_ASSERTION;
+			else
+				tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION);
+			pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id));
+		}
+	}
+}
+
+/*
+ * Apparently, these SoCs are not able to wake-up from suspend using
+ * the PMU. Too bad. Should they suddenly become capable of such a
+ * feat, the matches below should be moved to suspend.c.
+ */
+static const struct of_device_id exynos_dt_pmu_match[] = {
+	{ .compatible = "samsung,exynos5260-pmu" },
+	{ .compatible = "samsung,exynos5410-pmu" },
+	{ /*sentinel*/ },
+};
+
+static void exynos_map_pmu(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, exynos_dt_pmu_match);
+	if (np)
+		pmu_base_addr = of_iomap(np, 0);
+	of_node_put(np);
+}
+
+static void __init exynos_init_irq(void)
+{
+	irqchip_init();
+	/*
+	 * Since platsmp.c needs pmu base address by the time
+	 * DT is not unflatten so we can't use DT APIs before
+	 * init_irq
+	 */
+	exynos_map_pmu();
+}
+
+static void __init exynos_dt_machine_init(void)
+{
+	/*
+	 * This is called from smp_prepare_cpus if we've built for SMP, but
+	 * we still need to set it up for PM and firmware ops if not.
+	 */
+	if (!IS_ENABLED(CONFIG_SMP))
+		exynos_sysram_init();
+
+#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE)
+	if (of_machine_is_compatible("samsung,exynos4210") ||
+	    of_machine_is_compatible("samsung,exynos3250"))
+		exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
+#endif
+	if (of_machine_is_compatible("samsung,exynos4210") ||
+	    of_machine_is_compatible("samsung,exynos4212") ||
+	    (of_machine_is_compatible("samsung,exynos4412") &&
+	     (of_machine_is_compatible("samsung,trats2") ||
+		  of_machine_is_compatible("samsung,midas") ||
+		  of_machine_is_compatible("samsung,p4note"))) ||
+	    of_machine_is_compatible("samsung,exynos3250") ||
+	    of_machine_is_compatible("samsung,exynos5250"))
+		platform_device_register(&exynos_cpuidle);
+}
+
+static char const *const exynos_dt_compat[] __initconst = {
+	"samsung,exynos3",
+	"samsung,exynos3250",
+	"samsung,exynos4",
+	"samsung,exynos4210",
+	"samsung,exynos4212",
+	"samsung,exynos4412",
+	"samsung,exynos5",
+	"samsung,exynos5250",
+	"samsung,exynos5260",
+	"samsung,exynos5420",
+	NULL
+};
+
+static void __init exynos_dt_fixup(void)
+{
+	/*
+	 * Some versions of uboot pass garbage entries in the memory node,
+	 * use the old CONFIG_ARM_NR_BANKS
+	 */
+	of_fdt_limit_memory(8);
+}
+
+DT_MACHINE_START(EXYNOS_DT, "Samsung Exynos (Flattened Device Tree)")
+	.l2c_aux_val	= 0x08400000,
+	.l2c_aux_mask	= 0xf60fffff,
+	.smp		= smp_ops(exynos_smp_ops),
+	.map_io		= exynos_init_io,
+	.init_early	= exynos_firmware_init,
+	.init_irq	= exynos_init_irq,
+	.init_machine	= exynos_dt_machine_init,
+	.init_late	= exynos_pm_init,
+	.dt_compat	= exynos_dt_compat,
+	.dt_fixup	= exynos_dt_fixup,
+MACHINE_END

linux-7.2.3/arch/arm/mach-exynos/firmware.c

@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2012 Samsung Electronics.
+// Kyungmin Park <kyungmin.park@samsung.com>
+// Tomasz Figa <t.figa@samsung.com>
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/firmware.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/suspend.h>
+
+#include "common.h"
+#include "smc.h"
+
+#define EXYNOS_BOOT_ADDR	0x8
+#define EXYNOS_BOOT_FLAG	0xc
+
+static void exynos_save_cp15(void)
+{
+	/* Save Power control and Diagnostic registers */
+	asm ("mrc p15, 0, %0, c15, c0, 0\n"
+	     "mrc p15, 0, %1, c15, c0, 1\n"
+	     : "=r" (cp15_save_power), "=r" (cp15_save_diag)
+	     : : "cc");
+}
+
+static int exynos_do_idle(unsigned long mode)
+{
+	switch (mode) {
+	case FW_DO_IDLE_AFTR:
+		if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+			exynos_save_cp15();
+		writel_relaxed(__pa_symbol(exynos_cpu_resume_ns),
+			       sysram_ns_base_addr + 0x24);
+		writel_relaxed(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
+		if (soc_is_exynos3250()) {
+			flush_cache_all();
+			exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE,
+				   SMC_POWERSTATE_IDLE, 0);
+			exynos_smc(SMC_CMD_SHUTDOWN, OP_TYPE_CLUSTER,
+				   SMC_POWERSTATE_IDLE, 0);
+		} else
+			exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0);
+		break;
+	case FW_DO_IDLE_SLEEP:
+		exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
+	}
+	return 0;
+}
+
+static int exynos_cpu_boot(int cpu)
+{
+	/*
+	 * Exynos3250 doesn't need to send smc command for secondary CPU boot
+	 * because Exynos3250 removes WFE in secure mode.
+	 *
+	 * On most Exynos5 devices the call is ignored by trustzone firmware.
+	 */
+	if (!soc_is_exynos4210() && !soc_is_exynos4212() &&
+	    !soc_is_exynos4412() && !of_machine_is_compatible("google,manta"))
+		return 0;
+
+	/*
+	 * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
+	 * But, Exynos4212 has only one secondary CPU so second parameter
+	 * isn't used for informing secure firmware about CPU id.
+	 */
+	if (soc_is_exynos4212())
+		cpu = 0;
+
+	exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
+	return 0;
+}
+
+static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
+{
+	void __iomem *boot_reg;
+
+	if (!sysram_ns_base_addr)
+		return -ENODEV;
+
+	boot_reg = sysram_ns_base_addr + 0x1c;
+
+	/*
+	 * Almost all Exynos-series of SoCs that run in secure mode don't need
+	 * additional offset for every CPU, with Exynos4412 being the only
+	 * exception.
+	 */
+	if (soc_is_exynos4412())
+		boot_reg += 4 * cpu;
+
+	writel_relaxed(boot_addr, boot_reg);
+	return 0;
+}
+
+static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr)
+{
+	void __iomem *boot_reg;
+
+	if (!sysram_ns_base_addr)
+		return -ENODEV;
+
+	boot_reg = sysram_ns_base_addr + 0x1c;
+
+	if (soc_is_exynos4412())
+		boot_reg += 4 * cpu;
+
+	*boot_addr = readl_relaxed(boot_reg);
+	return 0;
+}
+
+static int exynos_cpu_suspend(unsigned long arg)
+{
+	flush_cache_all();
+	outer_flush_all();
+
+	exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
+
+	pr_info("Failed to suspend the system\n");
+	writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
+	return 1;
+}
+
+static int exynos_suspend(void)
+{
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+		exynos_save_cp15();
+
+	writel(EXYNOS_SLEEP_MAGIC, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
+	writel(__pa_symbol(exynos_cpu_resume_ns),
+		sysram_ns_base_addr + EXYNOS_BOOT_ADDR);
+
+	return cpu_suspend(0, exynos_cpu_suspend);
+}
+
+static int exynos_resume(void)
+{
+	writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
+
+	return 0;
+}
+
+static const struct firmware_ops exynos_firmware_ops = {
+	.do_idle		= IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL,
+	.set_cpu_boot_addr	= exynos_set_cpu_boot_addr,
+	.get_cpu_boot_addr	= exynos_get_cpu_boot_addr,
+	.cpu_boot		= exynos_cpu_boot,
+	.suspend		= IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL,
+	.resume			= IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL,
+};
+
+static void exynos_l2_write_sec(unsigned long val, unsigned reg)
+{
+	static int l2cache_enabled;
+
+	switch (reg) {
+	case L2X0_CTRL:
+		if (val & L2X0_CTRL_EN) {
+			/*
+			 * Before the cache can be enabled, due to firmware
+			 * design, SMC_CMD_L2X0INVALL must be called.
+			 */
+			if (!l2cache_enabled) {
+				exynos_smc(SMC_CMD_L2X0INVALL, 0, 0, 0);
+				l2cache_enabled = 1;
+			}
+		} else {
+			l2cache_enabled = 0;
+		}
+		exynos_smc(SMC_CMD_L2X0CTRL, val, 0, 0);
+		break;
+
+	case L2X0_DEBUG_CTRL:
+		exynos_smc(SMC_CMD_L2X0DEBUG, val, 0, 0);
+		break;
+
+	default:
+		WARN_ONCE(1, "%s: ignoring write to reg 0x%x\n", __func__, reg);
+	}
+}
+
+static void exynos_l2_configure(const struct l2x0_regs *regs)
+{
+	exynos_smc(SMC_CMD_L2X0SETUP1, regs->tag_latency, regs->data_latency,
+		   regs->prefetch_ctrl);
+	exynos_smc(SMC_CMD_L2X0SETUP2, regs->pwr_ctrl, regs->aux_ctrl, 0);
+}
+
+bool __init exynos_secure_firmware_available(void)
+{
+	struct device_node *nd;
+	const __be32 *addr;
+
+	nd = of_find_compatible_node(NULL, NULL,
+					"samsung,secure-firmware");
+	if (!nd)
+		return false;
+
+	addr = of_get_address(nd, 0, NULL, NULL);
+	of_node_put(nd);
+	if (!addr) {
+		pr_err("%s: No address specified.\n", __func__);
+		return false;
+	}
+
+	return true;
+}
+
+void __init exynos_firmware_init(void)
+{
+	if (!exynos_secure_firmware_available())
+		return;
+
+	pr_info("Running under secure firmware.\n");
+
+	register_firmware_ops(&exynos_firmware_ops);
+
+	/*
+	 * Exynos 4 SoCs (based on Cortex A9 and equipped with L2C-310),
+	 * running under secure firmware, require certain registers of L2
+	 * cache controller to be written in secure mode. Here .write_sec
+	 * callback is provided to perform necessary SMC calls.
+	 */
+	if (IS_ENABLED(CONFIG_CACHE_L2X0) &&
+	    read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
+		outer_cache.write_sec = exynos_l2_write_sec;
+		outer_cache.configure = exynos_l2_configure;
+	}
+}
+
+#define REG_CPU_STATE_ADDR	(sysram_ns_base_addr + 0x28)
+#define BOOT_MODE_MASK		0x1f
+
+void exynos_set_boot_flag(unsigned int cpu, unsigned int mode)
+{
+	unsigned int tmp;
+
+	tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4);
+
+	if (mode & BOOT_MODE_MASK)
+		tmp &= ~BOOT_MODE_MASK;
+
+	tmp |= mode;
+	writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+}
+
+void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode)
+{
+	unsigned int tmp;
+
+	tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4);
+	tmp &= ~mode;
+	writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+}

linux-7.2.3/arch/arm/mach-exynos/headsmp.S

@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Cloned from linux/arch/arm/mach-realview/headsmp.S
+ *
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/assembler.h>
+
+/*
+ * exynos4 specific entry point for secondary CPUs.  This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(exynos4_secondary_startup)
+ARM_BE8(setend	be)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+ENDPROC(exynos4_secondary_startup)
+
+	.align 2
+1:	.long	.
+	.long	exynos_pen_release

linux-7.2.3/arch/arm/mach-exynos/mcpm-exynos.c

@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2014 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+//
+// Based on arch/arm/mach-vexpress/dcscb.c
+
+#include <linux/arm-cci.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+#include <asm/mcpm.h>
+#include <asm/smp_plat.h>
+
+#include "common.h"
+
+#define EXYNOS5420_CPUS_PER_CLUSTER	4
+#define EXYNOS5420_NR_CLUSTERS		2
+
+#define EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN	BIT(9)
+#define EXYNOS5420_USE_ARM_CORE_DOWN_STATE	BIT(29)
+#define EXYNOS5420_USE_L2_COMMON_UP_STATE	BIT(30)
+
+static void __iomem *ns_sram_base_addr __ro_after_init;
+static bool secure_firmware __ro_after_init;
+
+/*
+ * The common v7_exit_coherency_flush API could not be used because of the
+ * Erratum 799270 workaround. This macro is the same as the common one (in
+ * arch/arm/include/asm/cacheflush.h) except for the erratum handling.
+ */
+#define exynos_v7_exit_coherency_flush(level) \
+	asm volatile( \
+	"mrc	p15, 0, r0, c1, c0, 0	@ get SCTLR\n\t" \
+	"bic	r0, r0, #"__stringify(CR_C)"\n\t" \
+	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR\n\t" \
+	"isb\n\t"\
+	"bl	v7_flush_dcache_"__stringify(level)"\n\t" \
+	"mrc	p15, 0, r0, c1, c0, 1	@ get ACTLR\n\t" \
+	"bic	r0, r0, #(1 << 6)	@ disable local coherency\n\t" \
+	/* Dummy Load of a device register to avoid Erratum 799270 */ \
+	"ldr	r4, [%0]\n\t" \
+	"and	r4, r4, #0\n\t" \
+	"orr	r0, r0, r4\n\t" \
+	"mcr	p15, 0, r0, c1, c0, 1	@ set ACTLR\n\t" \
+	"isb\n\t" \
+	"dsb\n\t" \
+	: \
+	: "Ir" (pmu_base_addr + S5P_INFORM0) \
+	: "r0", "r1", "r2", "r3", "r4", "r5", "r6", \
+	  "r9", "r10", "ip", "lr", "memory")
+
+static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
+{
+	unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+	bool state;
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
+		cluster >= EXYNOS5420_NR_CLUSTERS)
+		return -EINVAL;
+
+	state = exynos_cpu_power_state(cpunr);
+	exynos_cpu_power_up(cpunr);
+	if (!state && secure_firmware) {
+		/*
+		 * This assumes the cluster number of the big cores(Cortex A15)
+		 * is 0 and the Little cores(Cortex A7) is 1.
+		 * When the system was booted from the Little core,
+		 * they should be reset during power up cpu.
+		 */
+		if (cluster &&
+		    cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) {
+			unsigned int timeout = 16;
+
+			/*
+			 * Before we reset the Little cores, we should wait
+			 * the SPARE2 register is set to 1 because the init
+			 * codes of the iROM will set the register after
+			 * initialization.
+			 */
+			while (timeout && !pmu_raw_readl(S5P_PMU_SPARE2)) {
+				timeout--;
+				udelay(10);
+			}
+
+			if (timeout == 0) {
+				pr_err("cpu %u cluster %u powerup failed\n",
+				       cpu, cluster);
+				exynos_cpu_power_down(cpunr);
+				return -ETIMEDOUT;
+			}
+
+			pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu),
+					EXYNOS_SWRESET);
+		}
+	}
+
+	return 0;
+}
+
+static int exynos_cluster_powerup(unsigned int cluster)
+{
+	pr_debug("%s: cluster %u\n", __func__, cluster);
+	if (cluster >= EXYNOS5420_NR_CLUSTERS)
+		return -EINVAL;
+
+	exynos_cluster_power_up(cluster);
+	return 0;
+}
+
+static void exynos_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster)
+{
+	unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
+			cluster >= EXYNOS5420_NR_CLUSTERS);
+	exynos_cpu_power_down(cpunr);
+}
+
+static void exynos_cluster_powerdown_prepare(unsigned int cluster)
+{
+	pr_debug("%s: cluster %u\n", __func__, cluster);
+	BUG_ON(cluster >= EXYNOS5420_NR_CLUSTERS);
+	exynos_cluster_power_down(cluster);
+}
+
+static void exynos_cpu_cache_disable(void)
+{
+	/* Disable and flush the local CPU cache. */
+	exynos_v7_exit_coherency_flush(louis);
+}
+
+static void exynos_cluster_cache_disable(void)
+{
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) {
+		/*
+		 * On the Cortex-A15 we need to disable
+		 * L2 prefetching before flushing the cache.
+		 */
+		asm volatile(
+		"mcr	p15, 1, %0, c15, c0, 3\n\t"
+		"isb\n\t"
+		"dsb"
+		: : "r" (0x400));
+	}
+
+	/* Flush all cache levels for this cluster. */
+	exynos_v7_exit_coherency_flush(all);
+
+	/*
+	 * Disable cluster-level coherency by masking
+	 * incoming snoops and DVM messages:
+	 */
+	cci_disable_port_by_cpu(read_cpuid_mpidr());
+}
+
+static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster)
+{
+	unsigned int tries = 100;
+	unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
+			cluster >= EXYNOS5420_NR_CLUSTERS);
+
+	/* Wait for the core state to be OFF */
+	while (tries--) {
+		if ((exynos_cpu_power_state(cpunr) == 0))
+			return 0; /* success: the CPU is halted */
+
+		/* Otherwise, wait and retry: */
+		msleep(1);
+	}
+
+	return -ETIMEDOUT; /* timeout */
+}
+
+static void exynos_cpu_is_up(unsigned int cpu, unsigned int cluster)
+{
+	/* especially when resuming: make sure power control is set */
+	exynos_cpu_powerup(cpu, cluster);
+}
+
+static const struct mcpm_platform_ops exynos_power_ops = {
+	.cpu_powerup		= exynos_cpu_powerup,
+	.cluster_powerup	= exynos_cluster_powerup,
+	.cpu_powerdown_prepare	= exynos_cpu_powerdown_prepare,
+	.cluster_powerdown_prepare = exynos_cluster_powerdown_prepare,
+	.cpu_cache_disable	= exynos_cpu_cache_disable,
+	.cluster_cache_disable	= exynos_cluster_cache_disable,
+	.wait_for_powerdown	= exynos_wait_for_powerdown,
+	.cpu_is_up		= exynos_cpu_is_up,
+};
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ */
+static void __naked exynos_pm_power_up_setup(unsigned int affinity_level)
+{
+	asm volatile ("\n"
+	"cmp	r0, #1\n"
+	"bxne	lr\n"
+	"b	cci_enable_port_for_self");
+}
+
+static const struct of_device_id exynos_dt_mcpm_match[] = {
+	{ .compatible = "samsung,exynos5420" },
+	{ .compatible = "samsung,exynos5800" },
+	{},
+};
+
+static void exynos_mcpm_setup_entry_point(void *data)
+{
+	/*
+	 * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
+	 * as part of secondary_cpu_start().  Let's redirect it to the
+	 * mcpm_entry_point(). This is done during both secondary boot-up as
+	 * well as system resume.
+	 */
+	__raw_writel(0xe59f0000, ns_sram_base_addr);     /* ldr r0, [pc, #0] */
+	__raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx  r0 */
+	__raw_writel(__pa_symbol(mcpm_entry_point), ns_sram_base_addr + 8);
+}
+
+static const struct syscore_ops exynos_mcpm_syscore_ops = {
+	.resume	= exynos_mcpm_setup_entry_point,
+};
+
+static struct syscore exynos_mcpm_syscore = {
+	.ops = &exynos_mcpm_syscore_ops,
+};
+
+static int __init exynos_mcpm_init(void)
+{
+	struct device_node *node;
+	unsigned int value, i;
+	int ret;
+
+	node = of_find_matching_node(NULL, exynos_dt_mcpm_match);
+	if (!node)
+		return -ENODEV;
+	of_node_put(node);
+
+	if (!cci_probed())
+		return -ENODEV;
+
+	node = of_find_compatible_node(NULL, NULL,
+			"samsung,exynos4210-sysram-ns");
+	if (!node)
+		return -ENODEV;
+
+	ns_sram_base_addr = of_iomap(node, 0);
+	of_node_put(node);
+	if (!ns_sram_base_addr) {
+		pr_err("failed to map non-secure iRAM base address\n");
+		return -ENOMEM;
+	}
+
+	secure_firmware = exynos_secure_firmware_available();
+
+	/*
+	 * To increase the stability of KFC reset we need to program
+	 * the PMU SPARE3 register
+	 */
+	pmu_raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3);
+
+	ret = mcpm_platform_register(&exynos_power_ops);
+	if (!ret)
+		ret = mcpm_sync_init(exynos_pm_power_up_setup);
+	if (!ret)
+		ret = mcpm_loopback(exynos_cluster_cache_disable); /* turn on the CCI */
+	if (ret) {
+		iounmap(ns_sram_base_addr);
+		return ret;
+	}
+
+	mcpm_smp_set_ops();
+
+	pr_info("Exynos MCPM support installed\n");
+
+	/*
+	 * On Exynos5420/5800 for the A15 and A7 clusters:
+	 *
+	 * EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN ensures that all the cores
+	 * in a cluster are turned off before turning off the cluster L2.
+	 *
+	 * EXYNOS5420_USE_ARM_CORE_DOWN_STATE ensures that a cores is powered
+	 * off before waking it up.
+	 *
+	 * EXYNOS5420_USE_L2_COMMON_UP_STATE ensures that cluster L2 will be
+	 * turned on before the first man is powered up.
+	 */
+	for (i = 0; i < EXYNOS5420_NR_CLUSTERS; i++) {
+		value = pmu_raw_readl(EXYNOS_COMMON_OPTION(i));
+		value |= EXYNOS5420_ENABLE_AUTOMATIC_CORE_DOWN |
+			 EXYNOS5420_USE_ARM_CORE_DOWN_STATE    |
+			 EXYNOS5420_USE_L2_COMMON_UP_STATE;
+		pmu_raw_writel(value, EXYNOS_COMMON_OPTION(i));
+	}
+
+	exynos_mcpm_setup_entry_point(NULL);
+
+	register_syscore(&exynos_mcpm_syscore);
+
+	return ret;
+}
+
+early_initcall(exynos_mcpm_init);

linux-7.2.3/arch/arm/mach-exynos/platsmp.c

@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+//
+// Cloned from linux/arch/arm/mach-vexpress/platsmp.c
+//
+//  Copyright (C) 2002 ARM Ltd.
+//  All Rights Reserved
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+#include <asm/firmware.h>
+
+#include "common.h"
+
+extern void exynos4_secondary_startup(void);
+
+/* XXX exynos_pen_release is cargo culted code - DO NOT COPY XXX */
+volatile int exynos_pen_release = -1;
+
+#ifdef CONFIG_HOTPLUG_CPU
+static inline void cpu_leave_lowpower(u32 core_id)
+{
+	unsigned int v;
+
+	asm volatile(
+	"mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	  : "=&r" (v)
+	  : "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+	u32 mpidr = cpu_logical_map(cpu);
+	u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+
+	for (;;) {
+
+		/* Turn the CPU off on next WFI instruction. */
+		exynos_cpu_power_down(core_id);
+
+		wfi();
+
+		if (exynos_pen_release == core_id) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+
+		/*
+		 * Getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
+		 */
+		(*spurious)++;
+	}
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
+/**
+ * exynos_cpu_power_down() - power down the specified cpu
+ * @cpu: the cpu to power down
+ *
+ * Power down the specified cpu. The sequence must be finished by a
+ * call to cpu_do_idle()
+ */
+void exynos_cpu_power_down(int cpu)
+{
+	u32 core_conf;
+
+	if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) {
+		/*
+		 * Bypass power down for CPU0 during suspend. Check for
+		 * the SYS_PWR_REG value to decide if we are suspending
+		 * the system.
+		 */
+		int val = pmu_raw_readl(EXYNOS5_ARM_CORE0_SYS_PWR_REG);
+
+		if (!(val & S5P_CORE_LOCAL_PWR_EN))
+			return;
+	}
+
+	core_conf = pmu_raw_readl(EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+	core_conf &= ~S5P_CORE_LOCAL_PWR_EN;
+	pmu_raw_writel(core_conf, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+}
+
+/**
+ * exynos_cpu_power_up() - power up the specified cpu
+ * @cpu: the cpu to power up
+ *
+ * Power up the specified cpu
+ */
+void exynos_cpu_power_up(int cpu)
+{
+	u32 core_conf = S5P_CORE_LOCAL_PWR_EN;
+
+	if (soc_is_exynos3250())
+		core_conf |= S5P_CORE_AUTOWAKEUP_EN;
+
+	pmu_raw_writel(core_conf,
+			EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+}
+
+/**
+ * exynos_cpu_power_state() - returns the power state of the cpu
+ * @cpu: the cpu to retrieve the power state from
+ */
+int exynos_cpu_power_state(int cpu)
+{
+	return (pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
+			S5P_CORE_LOCAL_PWR_EN);
+}
+
+/**
+ * exynos_cluster_power_down() - power down the specified cluster
+ * @cluster: the cluster to power down
+ */
+void exynos_cluster_power_down(int cluster)
+{
+	pmu_raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster));
+}
+
+/**
+ * exynos_cluster_power_up() - power up the specified cluster
+ * @cluster: the cluster to power up
+ */
+void exynos_cluster_power_up(int cluster)
+{
+	pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
+			EXYNOS_COMMON_CONFIGURATION(cluster));
+}
+
+/**
+ * exynos_cluster_power_state() - returns the power state of the cluster
+ * @cluster: the cluster to retrieve the power state from
+ *
+ */
+int exynos_cluster_power_state(int cluster)
+{
+	return (pmu_raw_readl(EXYNOS_COMMON_STATUS(cluster)) &
+		S5P_CORE_LOCAL_PWR_EN);
+}
+
+/**
+ * exynos_scu_enable() - enables SCU for Cortex-A9 based system
+ */
+void exynos_scu_enable(void)
+{
+	struct device_node *np;
+	static void __iomem *scu_base;
+
+	if (!scu_base) {
+		np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+		if (np) {
+			scu_base = of_iomap(np, 0);
+			of_node_put(np);
+		} else {
+			scu_base = ioremap(scu_a9_get_base(), SZ_4K);
+		}
+	}
+	scu_enable(scu_base);
+}
+
+static void __iomem *cpu_boot_reg_base(void)
+{
+	if (soc_is_exynos4210() && exynos_rev() == EXYNOS4210_REV_1_1)
+		return pmu_base_addr + S5P_INFORM5;
+	return sysram_base_addr;
+}
+
+static inline void __iomem *cpu_boot_reg(int cpu)
+{
+	void __iomem *boot_reg;
+
+	boot_reg = cpu_boot_reg_base();
+	if (!boot_reg)
+		return IOMEM_ERR_PTR(-ENODEV);
+	if (soc_is_exynos4412())
+		boot_reg += 4*cpu;
+	else if (soc_is_exynos5420() || soc_is_exynos5800())
+		boot_reg += 4;
+	return boot_reg;
+}
+
+/*
+ * Set wake up by local power mode and execute software reset for given core.
+ *
+ * Currently this is needed only when booting secondary CPU on Exynos3250.
+ */
+void exynos_core_restart(u32 core_id)
+{
+	unsigned int timeout = 16;
+	u32 val;
+
+	if (!soc_is_exynos3250())
+		return;
+
+	while (timeout && !pmu_raw_readl(S5P_PMU_SPARE2)) {
+		timeout--;
+		udelay(10);
+	}
+	if (timeout == 0) {
+		pr_err("cpu core %u restart failed\n", core_id);
+		return;
+	}
+	udelay(10);
+
+	val = pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(core_id));
+	val |= S5P_CORE_WAKEUP_FROM_LOCAL_CFG;
+	pmu_raw_writel(val, EXYNOS_ARM_CORE_STATUS(core_id));
+
+	pmu_raw_writel(EXYNOS_CORE_PO_RESET(core_id), EXYNOS_SWRESET);
+}
+
+/*
+ * XXX CARGO CULTED CODE - DO NOT COPY XXX
+ *
+ * Write exynos_pen_release in a way that is guaranteed to be visible to
+ * all observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void exynos_write_pen_release(int val)
+{
+	exynos_pen_release = val;
+	smp_wmb();
+	sync_cache_w(&exynos_pen_release);
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+static void exynos_secondary_init(unsigned int cpu)
+{
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	exynos_write_pen_release(-1);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr)
+{
+	int ret;
+
+	/*
+	 * Try to set boot address using firmware first
+	 * and fall back to boot register if it fails.
+	 */
+	ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
+	if (ret && ret != -ENOSYS)
+		goto fail;
+	if (ret == -ENOSYS) {
+		void __iomem *boot_reg = cpu_boot_reg(core_id);
+
+		if (IS_ERR(boot_reg)) {
+			ret = PTR_ERR(boot_reg);
+			goto fail;
+		}
+		writel_relaxed(boot_addr, boot_reg);
+		ret = 0;
+	}
+fail:
+	return ret;
+}
+
+int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr)
+{
+	int ret;
+
+	/*
+	 * Try to get boot address using firmware first
+	 * and fall back to boot register if it fails.
+	 */
+	ret = call_firmware_op(get_cpu_boot_addr, core_id, boot_addr);
+	if (ret && ret != -ENOSYS)
+		goto fail;
+	if (ret == -ENOSYS) {
+		void __iomem *boot_reg = cpu_boot_reg(core_id);
+
+		if (IS_ERR(boot_reg)) {
+			ret = PTR_ERR(boot_reg);
+			goto fail;
+		}
+		*boot_addr = readl_relaxed(boot_reg);
+		ret = 0;
+	}
+fail:
+	return ret;
+}
+
+static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+	u32 mpidr = cpu_logical_map(cpu);
+	u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	int ret = -ENOSYS;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting exynos_pen_release.
+	 *
+	 * Note that "exynos_pen_release" is the hardware CPU core ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	exynos_write_pen_release(core_id);
+
+	if (!exynos_cpu_power_state(core_id)) {
+		exynos_cpu_power_up(core_id);
+		timeout = 10;
+
+		/* wait max 10 ms until cpu1 is on */
+		while (exynos_cpu_power_state(core_id)
+		       != S5P_CORE_LOCAL_PWR_EN) {
+			if (timeout == 0)
+				break;
+			timeout--;
+			mdelay(1);
+		}
+
+		if (timeout == 0) {
+			printk(KERN_ERR "cpu1 power enable failed");
+			spin_unlock(&boot_lock);
+			return -ETIMEDOUT;
+		}
+	}
+
+	exynos_core_restart(core_id);
+
+	/*
+	 * Send the secondary CPU a soft interrupt, thereby causing
+	 * the boot monitor to read the system wide flags register,
+	 * and branch to the address found there.
+	 */
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		unsigned long boot_addr;
+
+		smp_rmb();
+
+		boot_addr = __pa_symbol(exynos4_secondary_startup);
+
+		ret = exynos_set_boot_addr(core_id, boot_addr);
+		if (ret)
+			goto fail;
+
+		call_firmware_op(cpu_boot, core_id);
+
+		if (soc_is_exynos3250())
+			dsb_sev();
+		else
+			arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+		if (exynos_pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	if (exynos_pen_release != -1)
+		ret = -ETIMEDOUT;
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+fail:
+	spin_unlock(&boot_lock);
+
+	return exynos_pen_release != -1 ? ret : 0;
+}
+
+static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
+{
+	exynos_sysram_init();
+
+	exynos_set_delayed_reset_assertion(true);
+
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+		exynos_scu_enable();
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+static void exynos_cpu_die(unsigned int cpu)
+{
+	int spurious = 0;
+	u32 mpidr = cpu_logical_map(cpu);
+	u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+
+	v7_exit_coherency_flush(louis);
+
+	platform_do_lowpower(cpu, &spurious);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower(core_id);
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
+const struct smp_operations exynos_smp_ops __initconst = {
+	.smp_prepare_cpus	= exynos_smp_prepare_cpus,
+	.smp_secondary_init	= exynos_secondary_init,
+	.smp_boot_secondary	= exynos_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= exynos_cpu_die,
+#endif
+};

linux-7.2.3/arch/arm/mach-exynos/pm.c

@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+//
+// Exynos - Power Management support
+//
+// Based on arch/arm/mach-s3c2410/pm.c
+// Copyright (c) 2006 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/cpu_pm.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include <linux/soc/samsung/exynos-pmu.h>
+
+#include <asm/firmware.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+#include <asm/cacheflush.h>
+
+#include "common.h"
+
+static inline void __iomem *exynos_boot_vector_addr(void)
+{
+	if (exynos_rev() == EXYNOS4210_REV_1_1)
+		return pmu_base_addr + S5P_INFORM7;
+	else if (exynos_rev() == EXYNOS4210_REV_1_0)
+		return sysram_base_addr + 0x24;
+	return pmu_base_addr + S5P_INFORM0;
+}
+
+static inline void __iomem *exynos_boot_vector_flag(void)
+{
+	if (exynos_rev() == EXYNOS4210_REV_1_1)
+		return pmu_base_addr + S5P_INFORM6;
+	else if (exynos_rev() == EXYNOS4210_REV_1_0)
+		return sysram_base_addr + 0x20;
+	return pmu_base_addr + S5P_INFORM1;
+}
+
+#define S5P_CHECK_AFTR  0xFCBA0D10
+
+/* For Cortex-A9 Diagnostic and Power control register */
+static unsigned int save_arm_register[2];
+
+void exynos_cpu_save_register(void)
+{
+	unsigned long tmp;
+
+	/* Save Power control register */
+	asm ("mrc p15, 0, %0, c15, c0, 0"
+	     : "=r" (tmp) : : "cc");
+
+	save_arm_register[0] = tmp;
+
+	/* Save Diagnostic register */
+	asm ("mrc p15, 0, %0, c15, c0, 1"
+	     : "=r" (tmp) : : "cc");
+
+	save_arm_register[1] = tmp;
+}
+
+void exynos_cpu_restore_register(void)
+{
+	unsigned long tmp;
+
+	/* Restore Power control register */
+	tmp = save_arm_register[0];
+
+	asm volatile ("mcr p15, 0, %0, c15, c0, 0"
+		      : : "r" (tmp)
+		      : "cc");
+
+	/* Restore Diagnostic register */
+	tmp = save_arm_register[1];
+
+	asm volatile ("mcr p15, 0, %0, c15, c0, 1"
+		      : : "r" (tmp)
+		      : "cc");
+}
+
+void exynos_pm_central_suspend(void)
+{
+	unsigned long tmp;
+
+	/* Setting Central Sequence Register for power down mode */
+	tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
+	pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+}
+
+int exynos_pm_central_resume(void)
+{
+	unsigned long tmp;
+
+	/*
+	 * If PMU failed while entering sleep mode, WFI will be
+	 * ignored by PMU and then exiting cpu_do_idle().
+	 * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
+	 * in this situation.
+	 */
+	tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
+		tmp |= S5P_CENTRAL_LOWPWR_CFG;
+		pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+		/* clear the wakeup state register */
+		pmu_raw_writel(0x0, S5P_WAKEUP_STAT);
+		/* No need to perform below restore code */
+		return -1;
+	}
+
+	return 0;
+}
+
+/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
+static void exynos_set_wakeupmask(long mask)
+{
+	pmu_raw_writel(mask, S5P_WAKEUP_MASK);
+	if (soc_is_exynos3250())
+		pmu_raw_writel(0x0, S5P_WAKEUP_MASK2);
+}
+
+static void exynos_cpu_set_boot_vector(long flags)
+{
+	writel_relaxed(__pa_symbol(exynos_cpu_resume),
+		       exynos_boot_vector_addr());
+	writel_relaxed(flags, exynos_boot_vector_flag());
+}
+
+static int exynos_aftr_finisher(unsigned long flags)
+{
+	int ret;
+
+	exynos_set_wakeupmask(soc_is_exynos3250() ? 0x40003ffe : 0x0000ff3e);
+	/* Set value of power down register for aftr mode */
+	exynos_sys_powerdown_conf(SYS_AFTR);
+
+	ret = call_firmware_op(do_idle, FW_DO_IDLE_AFTR);
+	if (ret == -ENOSYS) {
+		if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+			exynos_cpu_save_register();
+		exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
+		cpu_do_idle();
+	}
+
+	return 1;
+}
+
+void exynos_enter_aftr(void)
+{
+	unsigned int cpuid = smp_processor_id();
+
+	cpu_pm_enter();
+
+	if (soc_is_exynos3250())
+		exynos_set_boot_flag(cpuid, C2_STATE);
+
+	exynos_pm_central_suspend();
+
+	if (soc_is_exynos4212() || soc_is_exynos4412()) {
+		/* Setting SEQ_OPTION register */
+		pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
+			       S5P_CENTRAL_SEQ_OPTION);
+	}
+
+	cpu_suspend(0, exynos_aftr_finisher);
+
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
+		exynos_scu_enable();
+		if (call_firmware_op(resume) == -ENOSYS)
+			exynos_cpu_restore_register();
+	}
+
+	exynos_pm_central_resume();
+
+	if (soc_is_exynos3250())
+		exynos_clear_boot_flag(cpuid, C2_STATE);
+
+	cpu_pm_exit();
+}
+
+#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE)
+static atomic_t cpu1_wakeup = ATOMIC_INIT(0);
+
+static int exynos_cpu0_enter_aftr(void)
+{
+	int ret = -1;
+
+	/*
+	 * If the other cpu is powered on, we have to power it off, because
+	 * the AFTR state won't work otherwise
+	 */
+	if (cpu_online(1)) {
+		/*
+		 * We reach a sync point with the coupled idle state, we know
+		 * the other cpu will power down itself or will abort the
+		 * sequence, let's wait for one of these to happen
+		 */
+		while (exynos_cpu_power_state(1)) {
+			unsigned long boot_addr;
+
+			/*
+			 * The other cpu may skip idle and boot back
+			 * up again
+			 */
+			if (atomic_read(&cpu1_wakeup))
+				goto abort;
+
+			/*
+			 * The other cpu may bounce through idle and
+			 * boot back up again, getting stuck in the
+			 * boot rom code
+			 */
+			ret = exynos_get_boot_addr(1, &boot_addr);
+			if (ret)
+				goto fail;
+			ret = -1;
+			if (boot_addr == 0)
+				goto abort;
+
+			cpu_relax();
+		}
+	}
+
+	exynos_enter_aftr();
+	ret = 0;
+
+abort:
+	if (cpu_online(1)) {
+		unsigned long boot_addr = __pa_symbol(exynos_cpu_resume);
+
+		/*
+		 * Set the boot vector to something non-zero
+		 */
+		ret = exynos_set_boot_addr(1, boot_addr);
+		if (ret)
+			goto fail;
+		dsb();
+
+		/*
+		 * Turn on cpu1 and wait for it to be on
+		 */
+		exynos_cpu_power_up(1);
+		while (exynos_cpu_power_state(1) != S5P_CORE_LOCAL_PWR_EN)
+			cpu_relax();
+
+		if (soc_is_exynos3250()) {
+			while (!pmu_raw_readl(S5P_PMU_SPARE2) &&
+			       !atomic_read(&cpu1_wakeup))
+				cpu_relax();
+
+			if (!atomic_read(&cpu1_wakeup))
+				exynos_core_restart(1);
+		}
+
+		while (!atomic_read(&cpu1_wakeup)) {
+			smp_rmb();
+
+			/*
+			 * Poke cpu1 out of the boot rom
+			 */
+
+			ret = exynos_set_boot_addr(1, boot_addr);
+			if (ret)
+				goto fail;
+
+			call_firmware_op(cpu_boot, 1);
+			dsb_sev();
+		}
+	}
+fail:
+	return ret;
+}
+
+static int exynos_wfi_finisher(unsigned long flags)
+{
+	if (soc_is_exynos3250())
+		flush_cache_all();
+	cpu_do_idle();
+
+	return -1;
+}
+
+static int exynos_cpu1_powerdown(void)
+{
+	int ret = -1;
+
+	/*
+	 * Idle sequence for cpu1
+	 */
+	if (cpu_pm_enter())
+		goto cpu1_aborted;
+
+	/*
+	 * Turn off cpu 1
+	 */
+	exynos_cpu_power_down(1);
+
+	if (soc_is_exynos3250())
+		pmu_raw_writel(0, S5P_PMU_SPARE2);
+
+	ret = cpu_suspend(0, exynos_wfi_finisher);
+
+	cpu_pm_exit();
+
+cpu1_aborted:
+	dsb();
+	/*
+	 * Notify cpu 0 that cpu 1 is awake
+	 */
+	atomic_set(&cpu1_wakeup, 1);
+
+	return ret;
+}
+
+static void exynos_pre_enter_aftr(void)
+{
+	unsigned long boot_addr = __pa_symbol(exynos_cpu_resume);
+
+	(void)exynos_set_boot_addr(1, boot_addr);
+}
+
+static void exynos_post_enter_aftr(void)
+{
+	atomic_set(&cpu1_wakeup, 0);
+}
+
+struct cpuidle_exynos_data cpuidle_coupled_exynos_data = {
+	.cpu0_enter_aftr		= exynos_cpu0_enter_aftr,
+	.cpu1_powerdown		= exynos_cpu1_powerdown,
+	.pre_enter_aftr		= exynos_pre_enter_aftr,
+	.post_enter_aftr		= exynos_post_enter_aftr,
+};
+#endif /* CONFIG_SMP && CONFIG_ARM_EXYNOS_CPUIDLE */

linux-7.2.3/arch/arm/mach-exynos/sleep.S

@@ -0,0 +1,125 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Exynos low-level resume code
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+#include "smc.h"
+
+#define CPU_MASK	0xff0ffff0
+#define CPU_CORTEX_A9	0x410fc090
+
+	.text
+	.align
+
+	/*
+	 * sleep magic, to allow the bootloader to check for an valid
+	 * image to resume to. Must be the first word before the
+	 * exynos_cpu_resume entry.
+	 */
+
+	.word	0x2bedf00d
+
+	/*
+	 * exynos_cpu_resume
+	 *
+	 * resume code entry for bootloader to call
+	 */
+
+ENTRY(exynos_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+	mrc	p15, 0, r0, c0, c0, 0
+	ldr	r1, =CPU_MASK
+	and	r0, r0, r1
+	ldr	r1, =CPU_CORTEX_A9
+	cmp	r0, r1
+	bleq	l2c310_early_resume
+#endif
+	b	cpu_resume
+ENDPROC(exynos_cpu_resume)
+
+	.align
+	.arch armv7-a
+	.arch_extension sec
+ENTRY(exynos_cpu_resume_ns)
+	mrc	p15, 0, r0, c0, c0, 0
+	ldr	r1, =CPU_MASK
+	and	r0, r0, r1
+	ldr	r1, =CPU_CORTEX_A9
+	cmp	r0, r1
+	bne	skip_cp15
+
+	adr	r0, _cp15_save_power
+	ldr	r1, [r0]
+	ldr	r1, [r0, r1]
+	adr	r0, _cp15_save_diag
+	ldr	r2, [r0]
+	ldr	r2, [r0, r2]
+	mov	r0, #SMC_CMD_C15RESUME
+	dsb
+	smc	#0
+#ifdef CONFIG_CACHE_L2X0
+	adr	r0, 1f
+	ldr	r2, [r0]
+	add	r0, r2, r0
+
+	/* Check that the address has been initialised. */
+	ldr	r1, [r0, #L2X0_R_PHY_BASE]
+	teq	r1, #0
+	beq	skip_l2x0
+
+	/* Check if controller has been enabled. */
+	ldr	r2, [r1, #L2X0_CTRL]
+	tst	r2, #0x1
+	bne	skip_l2x0
+
+	ldr	r1, [r0, #L2X0_R_TAG_LATENCY]
+	ldr	r2, [r0, #L2X0_R_DATA_LATENCY]
+	ldr	r3, [r0, #L2X0_R_PREFETCH_CTRL]
+	mov	r0, #SMC_CMD_L2X0SETUP1
+	smc	#0
+
+	/* Reload saved regs pointer because smc corrupts registers. */
+	adr	r0, 1f
+	ldr	r2, [r0]
+	add	r0, r2, r0
+
+	ldr	r1, [r0, #L2X0_R_PWR_CTRL]
+	ldr	r2, [r0, #L2X0_R_AUX_CTRL]
+	mov	r0, #SMC_CMD_L2X0SETUP2
+	smc	#0
+
+	mov	r0, #SMC_CMD_L2X0INVALL
+	smc	#0
+
+	mov	r1, #1
+	mov	r0, #SMC_CMD_L2X0CTRL
+	smc	#0
+skip_l2x0:
+#endif /* CONFIG_CACHE_L2X0 */
+skip_cp15:
+	b	cpu_resume
+ENDPROC(exynos_cpu_resume_ns)
+
+	.align
+_cp15_save_power:
+	.long	cp15_save_power - .
+_cp15_save_diag:
+	.long	cp15_save_diag - .
+#ifdef CONFIG_CACHE_L2X0
+1:	.long	l2x0_saved_regs - .
+#endif /* CONFIG_CACHE_L2X0 */
+
+	.data
+	.align	2
+	.globl cp15_save_diag
+cp15_save_diag:
+	.long	0	@ cp15 diagnostic
+	.globl cp15_save_power
+cp15_save_power:
+	.long	0	@ cp15 power control

linux-7.2.3/arch/arm/mach-exynos/smc.h

@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (c) 2012 Samsung Electronics.
+ *
+ * Exynos - SMC Call
+ */
+
+#ifndef __ASM_ARCH_EXYNOS_SMC_H
+#define __ASM_ARCH_EXYNOS_SMC_H
+
+#define SMC_CMD_INIT		(-1)
+#define SMC_CMD_INFO		(-2)
+/* For Power Management */
+#define SMC_CMD_SLEEP		(-3)
+#define SMC_CMD_CPU1BOOT	(-4)
+#define SMC_CMD_CPU0AFTR	(-5)
+#define SMC_CMD_SAVE		(-6)
+#define SMC_CMD_SHUTDOWN	(-7)
+/* For CP15 Access */
+#define SMC_CMD_C15RESUME	(-11)
+/* For L2 Cache Access */
+#define SMC_CMD_L2X0CTRL	(-21)
+#define SMC_CMD_L2X0SETUP1	(-22)
+#define SMC_CMD_L2X0SETUP2	(-23)
+#define SMC_CMD_L2X0INVALL	(-24)
+#define SMC_CMD_L2X0DEBUG	(-25)
+
+/* For Accessing CP15/SFR (General) */
+#define SMC_CMD_REG		(-101)
+
+/* defines for SMC_CMD_REG */
+#define SMC_REG_CLASS_SFR_W	(0x1 << 30)
+#define SMC_REG_ID_SFR_W(addr)	(SMC_REG_CLASS_SFR_W | ((addr) >> 2))
+
+#ifndef __ASSEMBLY__
+
+extern void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3);
+
+#endif /* __ASSEMBLY__ */
+
+/* op type for SMC_CMD_SAVE and SMC_CMD_SHUTDOWN */
+#define OP_TYPE_CORE		0x0
+#define OP_TYPE_CLUSTER		0x1
+
+/* Power State required for SMC_CMD_SAVE and SMC_CMD_SHUTDOWN */
+#define SMC_POWERSTATE_IDLE	0x1
+
+#endif

linux-7.2.3/arch/arm/mach-exynos/suspend.c

@@ -0,0 +1,714 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+//
+// Exynos - Suspend support
+//
+// Based on arch/arm/mach-s3c2410/pm.c
+// Copyright (c) 2006 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
+#include <linux/cpu_pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/err.h>
+#include <linux/regulator/machine.h>
+#include <linux/soc/samsung/exynos-pmu.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/firmware.h>
+#include <asm/mcpm.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+
+#include "common.h"
+#include "smc.h"
+
+#define REG_TABLE_END (-1U)
+
+#define EXYNOS5420_CPU_STATE	0x28
+
+/**
+ * struct exynos_wkup_irq - PMU IRQ to mask mapping
+ * @hwirq: Hardware IRQ signal of the PMU
+ * @mask: Mask in PMU wake-up mask register
+ */
+struct exynos_wkup_irq {
+	unsigned int hwirq;
+	u32 mask;
+};
+
+struct exynos_pm_data {
+	const struct exynos_wkup_irq *wkup_irq;
+	unsigned int wake_disable_mask;
+
+	void (*pm_prepare)(void);
+	void (*pm_resume_prepare)(void);
+	int (*cpu_suspend)(unsigned long);
+
+	const struct syscore_ops *syscore_ops;
+};
+
+/* Used only on Exynos542x/5800 */
+struct exynos_pm_state {
+	int cpu_state;
+	unsigned int pmu_spare3;
+	void __iomem *sysram_base;
+	phys_addr_t sysram_phys;
+	bool secure_firmware;
+};
+
+static const struct exynos_pm_data *pm_data __ro_after_init;
+static struct exynos_pm_state pm_state;
+
+/*
+ * GIC wake-up support
+ */
+
+static u32 exynos_irqwake_intmask = 0xffffffff;
+
+static const struct exynos_wkup_irq exynos3250_wkup_irq[] = {
+	{ 73, BIT(1) }, /* RTC alarm */
+	{ 74, BIT(2) }, /* RTC tick */
+	{ /* sentinel */ },
+};
+
+static const struct exynos_wkup_irq exynos4_wkup_irq[] = {
+	{ 44, BIT(1) }, /* RTC alarm */
+	{ 45, BIT(2) }, /* RTC tick */
+	{ /* sentinel */ },
+};
+
+static const struct exynos_wkup_irq exynos5250_wkup_irq[] = {
+	{ 43, BIT(1) }, /* RTC alarm */
+	{ 44, BIT(2) }, /* RTC tick */
+	{ /* sentinel */ },
+};
+
+static u32 exynos_read_eint_wakeup_mask(void)
+{
+	return pmu_raw_readl(EXYNOS_EINT_WAKEUP_MASK);
+}
+
+static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
+{
+	const struct exynos_wkup_irq *wkup_irq;
+
+	if (!pm_data->wkup_irq)
+		return -ENOENT;
+	wkup_irq = pm_data->wkup_irq;
+
+	while (wkup_irq->mask) {
+		if (wkup_irq->hwirq == data->hwirq) {
+			if (!state)
+				exynos_irqwake_intmask |= wkup_irq->mask;
+			else
+				exynos_irqwake_intmask &= ~wkup_irq->mask;
+			return 0;
+		}
+		++wkup_irq;
+	}
+
+	return -ENOENT;
+}
+
+static struct irq_chip exynos_pmu_chip = {
+	.name			= "PMU",
+	.irq_eoi		= irq_chip_eoi_parent,
+	.irq_mask		= irq_chip_mask_parent,
+	.irq_unmask		= irq_chip_unmask_parent,
+	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+	.irq_set_wake		= exynos_irq_set_wake,
+#ifdef CONFIG_SMP
+	.irq_set_affinity	= irq_chip_set_affinity_parent,
+#endif
+};
+
+static int exynos_pmu_domain_translate(struct irq_domain *d,
+				       struct irq_fwspec *fwspec,
+				       unsigned long *hwirq,
+				       unsigned int *type)
+{
+	if (is_of_node(fwspec->fwnode)) {
+		if (fwspec->param_count != 3)
+			return -EINVAL;
+
+		/* No PPI should point to this domain */
+		if (fwspec->param[0] != 0)
+			return -EINVAL;
+
+		*hwirq = fwspec->param[1];
+		*type = fwspec->param[2];
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int exynos_pmu_domain_alloc(struct irq_domain *domain,
+				   unsigned int virq,
+				   unsigned int nr_irqs, void *data)
+{
+	struct irq_fwspec *fwspec = data;
+	struct irq_fwspec parent_fwspec;
+	irq_hw_number_t hwirq;
+	int i;
+
+	if (fwspec->param_count != 3)
+		return -EINVAL;	/* Not GIC compliant */
+	if (fwspec->param[0] != 0)
+		return -EINVAL;	/* No PPI should point to this domain */
+
+	hwirq = fwspec->param[1];
+
+	for (i = 0; i < nr_irqs; i++)
+		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+					      &exynos_pmu_chip, NULL);
+
+	parent_fwspec = *fwspec;
+	parent_fwspec.fwnode = domain->parent->fwnode;
+	return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
+					    &parent_fwspec);
+}
+
+static const struct irq_domain_ops exynos_pmu_domain_ops = {
+	.translate	= exynos_pmu_domain_translate,
+	.alloc		= exynos_pmu_domain_alloc,
+	.free		= irq_domain_free_irqs_common,
+};
+
+static int __init exynos_pmu_irq_init(struct device_node *node,
+				      struct device_node *parent)
+{
+	struct irq_domain *parent_domain, *domain;
+
+	if (!parent) {
+		pr_err("%pOF: no parent, giving up\n", node);
+		return -ENODEV;
+	}
+
+	parent_domain = irq_find_host(parent);
+	if (!parent_domain) {
+		pr_err("%pOF: unable to obtain parent domain\n", node);
+		return -ENXIO;
+	}
+
+	pmu_base_addr = of_iomap(node, 0);
+
+	if (!pmu_base_addr) {
+		pr_err("%pOF: failed to find exynos pmu register\n", node);
+		return -ENOMEM;
+	}
+
+	domain = irq_domain_create_hierarchy(parent_domain, 0, 0, of_fwnode_handle(node),
+					     &exynos_pmu_domain_ops, NULL);
+	if (!domain) {
+		iounmap(pmu_base_addr);
+		pmu_base_addr = NULL;
+		return -ENOMEM;
+	}
+
+	/*
+	 * Clear the OF_POPULATED flag set in of_irq_init so that
+	 * later the Exynos PMU platform device won't be skipped.
+	 */
+	of_node_clear_flag(node, OF_POPULATED);
+
+	return 0;
+}
+
+#define EXYNOS_PMU_IRQ(symbol, name)	IRQCHIP_DECLARE(symbol, name, exynos_pmu_irq_init)
+
+EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
+EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
+EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu");
+EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu");
+EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu");
+EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu");
+
+static int exynos_cpu_do_idle(void)
+{
+	/* issue the standby signal into the pm unit. */
+	cpu_do_idle();
+
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
+}
+static void exynos_flush_cache_all(void)
+{
+	flush_cache_all();
+	outer_flush_all();
+}
+
+static int exynos_cpu_suspend(unsigned long arg)
+{
+	exynos_flush_cache_all();
+	return exynos_cpu_do_idle();
+}
+
+static int exynos3250_cpu_suspend(unsigned long arg)
+{
+	flush_cache_all();
+	return exynos_cpu_do_idle();
+}
+
+static int exynos5420_cpu_suspend(unsigned long arg)
+{
+	/* MCPM works with HW CPU identifiers */
+	unsigned int mpidr = read_cpuid_mpidr();
+	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+
+	if (IS_ENABLED(CONFIG_EXYNOS_MCPM)) {
+		mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
+		mcpm_cpu_suspend();
+	}
+
+	pr_info("Failed to suspend the system\n");
+
+	/* return value != 0 means failure */
+	return 1;
+}
+
+static void exynos_pm_set_wakeup_mask(void)
+{
+	/*
+	 * Set wake-up mask registers
+	 * EXYNOS_EINT_WAKEUP_MASK is set by pinctrl driver in late suspend.
+	 */
+	pmu_raw_writel(exynos_irqwake_intmask & ~BIT(31), S5P_WAKEUP_MASK);
+}
+
+static void exynos_pm_enter_sleep_mode(void)
+{
+	/* Set value of power down register for sleep mode */
+	exynos_sys_powerdown_conf(SYS_SLEEP);
+	pmu_raw_writel(EXYNOS_SLEEP_MAGIC, S5P_INFORM1);
+}
+
+static void exynos_pm_prepare(void)
+{
+	exynos_set_delayed_reset_assertion(false);
+
+	/* Set wake-up mask registers */
+	exynos_pm_set_wakeup_mask();
+
+	exynos_pm_enter_sleep_mode();
+
+	/* ensure at least INFORM0 has the resume address */
+	pmu_raw_writel(__pa_symbol(exynos_cpu_resume), S5P_INFORM0);
+}
+
+static void exynos3250_pm_prepare(void)
+{
+	unsigned int tmp;
+
+	/* Set wake-up mask registers */
+	exynos_pm_set_wakeup_mask();
+
+	tmp = pmu_raw_readl(EXYNOS3_ARM_L2_OPTION);
+	tmp &= ~EXYNOS5_OPTION_USE_RETENTION;
+	pmu_raw_writel(tmp, EXYNOS3_ARM_L2_OPTION);
+
+	exynos_pm_enter_sleep_mode();
+
+	/* ensure at least INFORM0 has the resume address */
+	pmu_raw_writel(__pa_symbol(exynos_cpu_resume), S5P_INFORM0);
+}
+
+static void exynos5420_pm_prepare(void)
+{
+	unsigned int tmp;
+
+	/* Set wake-up mask registers */
+	exynos_pm_set_wakeup_mask();
+
+	pm_state.pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3);
+	/*
+	 * The cpu state needs to be saved and restored so that the
+	 * secondary CPUs will enter low power start. Though the U-Boot
+	 * is setting the cpu state with low power flag, the kernel
+	 * needs to restore it back in case, the primary cpu fails to
+	 * suspend for any reason.
+	 */
+	pm_state.cpu_state = readl_relaxed(pm_state.sysram_base +
+					   EXYNOS5420_CPU_STATE);
+	writel_relaxed(0x0, pm_state.sysram_base + EXYNOS5420_CPU_STATE);
+	if (pm_state.secure_firmware)
+		exynos_smc(SMC_CMD_REG, SMC_REG_ID_SFR_W(pm_state.sysram_phys +
+							 EXYNOS5420_CPU_STATE),
+			   0, 0);
+
+	exynos_pm_enter_sleep_mode();
+
+	/* ensure at least INFORM0 has the resume address */
+	if (IS_ENABLED(CONFIG_EXYNOS_MCPM))
+		pmu_raw_writel(__pa_symbol(mcpm_entry_point), S5P_INFORM0);
+
+	tmp = pmu_raw_readl(EXYNOS_L2_OPTION(0));
+	tmp &= ~EXYNOS_L2_USE_RETENTION;
+	pmu_raw_writel(tmp, EXYNOS_L2_OPTION(0));
+
+	tmp = pmu_raw_readl(EXYNOS5420_SFR_AXI_CGDIS1);
+	tmp |= EXYNOS5420_UFS;
+	pmu_raw_writel(tmp, EXYNOS5420_SFR_AXI_CGDIS1);
+
+	tmp = pmu_raw_readl(EXYNOS5420_ARM_COMMON_OPTION);
+	tmp &= ~EXYNOS5420_L2RSTDISABLE_VALUE;
+	pmu_raw_writel(tmp, EXYNOS5420_ARM_COMMON_OPTION);
+
+	tmp = pmu_raw_readl(EXYNOS5420_FSYS2_OPTION);
+	tmp |= EXYNOS5420_EMULATION;
+	pmu_raw_writel(tmp, EXYNOS5420_FSYS2_OPTION);
+
+	tmp = pmu_raw_readl(EXYNOS5420_PSGEN_OPTION);
+	tmp |= EXYNOS5420_EMULATION;
+	pmu_raw_writel(tmp, EXYNOS5420_PSGEN_OPTION);
+}
+
+
+static int exynos_pm_suspend(void *data)
+{
+	exynos_pm_central_suspend();
+
+	/* Setting SEQ_OPTION register */
+	pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
+		       S5P_CENTRAL_SEQ_OPTION);
+
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+		exynos_cpu_save_register();
+
+	return 0;
+}
+
+static int exynos5420_pm_suspend(void *data)
+{
+	u32 this_cluster;
+
+	exynos_pm_central_suspend();
+
+	/* Setting SEQ_OPTION register */
+
+	this_cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1);
+	if (!this_cluster)
+		pmu_raw_writel(EXYNOS5420_ARM_USE_STANDBY_WFI0,
+				S5P_CENTRAL_SEQ_OPTION);
+	else
+		pmu_raw_writel(EXYNOS5420_KFC_USE_STANDBY_WFI0,
+				S5P_CENTRAL_SEQ_OPTION);
+	return 0;
+}
+
+static void exynos_pm_resume(void *data)
+{
+	u32 cpuid = read_cpuid_part();
+
+	if (exynos_pm_central_resume())
+		goto early_wakeup;
+
+	if (cpuid == ARM_CPU_PART_CORTEX_A9)
+		exynos_scu_enable();
+
+	if (call_firmware_op(resume) == -ENOSYS
+	    && cpuid == ARM_CPU_PART_CORTEX_A9)
+		exynos_cpu_restore_register();
+
+early_wakeup:
+
+	/* Clear SLEEP mode set in INFORM1 */
+	pmu_raw_writel(0x0, S5P_INFORM1);
+	exynos_set_delayed_reset_assertion(true);
+}
+
+static void exynos3250_pm_resume(void *data)
+{
+	u32 cpuid = read_cpuid_part();
+
+	if (exynos_pm_central_resume())
+		goto early_wakeup;
+
+	pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
+
+	if (call_firmware_op(resume) == -ENOSYS
+	    && cpuid == ARM_CPU_PART_CORTEX_A9)
+		exynos_cpu_restore_register();
+
+early_wakeup:
+
+	/* Clear SLEEP mode set in INFORM1 */
+	pmu_raw_writel(0x0, S5P_INFORM1);
+}
+
+static void exynos5420_prepare_pm_resume(void)
+{
+	unsigned int mpidr, cluster;
+
+	mpidr = read_cpuid_mpidr();
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	if (IS_ENABLED(CONFIG_EXYNOS_MCPM))
+		WARN_ON(mcpm_cpu_powered_up());
+
+	if (IS_ENABLED(CONFIG_HW_PERF_EVENTS) && cluster != 0) {
+		/*
+		 * When system is resumed on the LITTLE/KFC core (cluster 1),
+		 * the DSCR is not properly updated until the power is turned
+		 * on also for the cluster 0. Enable it for a while to
+		 * propagate the SPNIDEN and SPIDEN signals from Secure JTAG
+		 * block and avoid undefined instruction issue on CP14 reset.
+		 */
+		pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
+				EXYNOS_COMMON_CONFIGURATION(0));
+		pmu_raw_writel(0,
+				EXYNOS_COMMON_CONFIGURATION(0));
+	}
+}
+
+static void exynos5420_pm_resume(void *data)
+{
+	unsigned long tmp;
+
+	/* Restore the CPU0 low power state register */
+	tmp = pmu_raw_readl(EXYNOS5_ARM_CORE0_SYS_PWR_REG);
+	pmu_raw_writel(tmp | S5P_CORE_LOCAL_PWR_EN,
+		       EXYNOS5_ARM_CORE0_SYS_PWR_REG);
+
+	/* Restore the sysram cpu state register */
+	writel_relaxed(pm_state.cpu_state,
+		       pm_state.sysram_base + EXYNOS5420_CPU_STATE);
+	if (pm_state.secure_firmware)
+		exynos_smc(SMC_CMD_REG,
+			   SMC_REG_ID_SFR_W(pm_state.sysram_phys +
+					    EXYNOS5420_CPU_STATE),
+			   EXYNOS_AFTR_MAGIC, 0);
+
+	pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL,
+			S5P_CENTRAL_SEQ_OPTION);
+
+	if (exynos_pm_central_resume())
+		goto early_wakeup;
+
+	pmu_raw_writel(pm_state.pmu_spare3, S5P_PMU_SPARE3);
+
+early_wakeup:
+
+	tmp = pmu_raw_readl(EXYNOS5420_SFR_AXI_CGDIS1);
+	tmp &= ~EXYNOS5420_UFS;
+	pmu_raw_writel(tmp, EXYNOS5420_SFR_AXI_CGDIS1);
+
+	tmp = pmu_raw_readl(EXYNOS5420_FSYS2_OPTION);
+	tmp &= ~EXYNOS5420_EMULATION;
+	pmu_raw_writel(tmp, EXYNOS5420_FSYS2_OPTION);
+
+	tmp = pmu_raw_readl(EXYNOS5420_PSGEN_OPTION);
+	tmp &= ~EXYNOS5420_EMULATION;
+	pmu_raw_writel(tmp, EXYNOS5420_PSGEN_OPTION);
+
+	/* Clear SLEEP mode set in INFORM1 */
+	pmu_raw_writel(0x0, S5P_INFORM1);
+}
+
+/*
+ * Suspend Ops
+ */
+
+static int exynos_suspend_enter(suspend_state_t state)
+{
+	u32 eint_wakeup_mask = exynos_read_eint_wakeup_mask();
+	int ret;
+
+	pr_debug("%s: suspending the system...\n", __func__);
+
+	pr_debug("%s: wakeup masks: %08x,%08x\n", __func__,
+		  exynos_irqwake_intmask, eint_wakeup_mask);
+
+	if (exynos_irqwake_intmask == -1U
+	    && eint_wakeup_mask == EXYNOS_EINT_WAKEUP_MASK_DISABLED) {
+		pr_err("%s: No wake-up sources!\n", __func__);
+		pr_err("%s: Aborting sleep\n", __func__);
+		return -EINVAL;
+	}
+
+	if (pm_data->pm_prepare)
+		pm_data->pm_prepare();
+	flush_cache_all();
+
+	ret = call_firmware_op(suspend);
+	if (ret == -ENOSYS)
+		ret = cpu_suspend(0, pm_data->cpu_suspend);
+	if (ret)
+		return ret;
+
+	if (pm_data->pm_resume_prepare)
+		pm_data->pm_resume_prepare();
+
+	pr_debug("%s: wakeup stat: %08x\n", __func__,
+			pmu_raw_readl(S5P_WAKEUP_STAT));
+
+	pr_debug("%s: resuming the system...\n", __func__);
+
+	return 0;
+}
+
+static int exynos_suspend_prepare(void)
+{
+	int ret;
+
+	/*
+	 * REVISIT: It would be better if struct platform_suspend_ops
+	 * .prepare handler get the suspend_state_t as a parameter to
+	 * avoid hard-coding the suspend to mem state. It's safe to do
+	 * it now only because the suspend_valid_only_mem function is
+	 * used as the .valid callback used to check if a given state
+	 * is supported by the platform anyways.
+	 */
+	ret = regulator_suspend_prepare(PM_SUSPEND_MEM);
+	if (ret) {
+		pr_err("Failed to prepare regulators for suspend (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void exynos_suspend_finish(void)
+{
+	int ret;
+
+	ret = regulator_suspend_finish();
+	if (ret)
+		pr_warn("Failed to resume regulators from suspend (%d)\n", ret);
+}
+
+static const struct platform_suspend_ops exynos_suspend_ops = {
+	.enter		= exynos_suspend_enter,
+	.prepare	= exynos_suspend_prepare,
+	.finish		= exynos_suspend_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+static const struct syscore_ops exynos3250_syscore_ops = {
+	.suspend = exynos_pm_suspend,
+	.resume = exynos3250_pm_resume,
+};
+
+static const struct exynos_pm_data exynos3250_pm_data = {
+	.wkup_irq	= exynos3250_wkup_irq,
+	.wake_disable_mask = ((0xFF << 8) | (0x1F << 1)),
+	.pm_prepare	= exynos3250_pm_prepare,
+	.cpu_suspend	= exynos3250_cpu_suspend,
+	.syscore_ops	= &exynos3250_syscore_ops,
+};
+
+static const struct syscore_ops exynos_syscore_ops = {
+	.suspend = exynos_pm_suspend,
+	.resume = exynos_pm_resume,
+};
+
+static const struct exynos_pm_data exynos4_pm_data = {
+	.wkup_irq	= exynos4_wkup_irq,
+	.wake_disable_mask = ((0xFF << 8) | (0x1F << 1)),
+	.pm_prepare	= exynos_pm_prepare,
+	.cpu_suspend	= exynos_cpu_suspend,
+	.syscore_ops	= &exynos_syscore_ops,
+};
+
+static const struct exynos_pm_data exynos5250_pm_data = {
+	.wkup_irq	= exynos5250_wkup_irq,
+	.wake_disable_mask = ((0xFF << 8) | (0x1F << 1)),
+	.pm_prepare	= exynos_pm_prepare,
+	.cpu_suspend	= exynos_cpu_suspend,
+	.syscore_ops	= &exynos_syscore_ops,
+};
+
+static const struct syscore_ops exynos5420_syscore_ops = {
+	.resume = exynos5420_pm_resume,
+	.suspend = exynos5420_pm_suspend,
+};
+
+static const struct exynos_pm_data exynos5420_pm_data = {
+	.wkup_irq	= exynos5250_wkup_irq,
+	.wake_disable_mask = (0x7F << 7) | (0x1F << 1),
+	.pm_resume_prepare = exynos5420_prepare_pm_resume,
+	.pm_prepare	= exynos5420_pm_prepare,
+	.cpu_suspend	= exynos5420_cpu_suspend,
+	.syscore_ops	= &exynos5420_syscore_ops,
+};
+
+static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = {
+	{
+		.compatible = "samsung,exynos3250-pmu",
+		.data = &exynos3250_pm_data,
+	}, {
+		.compatible = "samsung,exynos4210-pmu",
+		.data = &exynos4_pm_data,
+	}, {
+		.compatible = "samsung,exynos4212-pmu",
+		.data = &exynos4_pm_data,
+	}, {
+		.compatible = "samsung,exynos4412-pmu",
+		.data = &exynos4_pm_data,
+	}, {
+		.compatible = "samsung,exynos5250-pmu",
+		.data = &exynos5250_pm_data,
+	}, {
+		.compatible = "samsung,exynos5420-pmu",
+		.data = &exynos5420_pm_data,
+	},
+	{ /*sentinel*/ },
+};
+
+static struct syscore exynos_pm_syscore;
+
+void __init exynos_pm_init(void)
+{
+	const struct of_device_id *match;
+	struct device_node *np;
+	u32 tmp;
+
+	np = of_find_matching_node_and_match(NULL, exynos_pmu_of_device_ids, &match);
+	if (!np) {
+		pr_err("Failed to find PMU node\n");
+		return;
+	}
+
+	if (WARN_ON(!of_property_read_bool(np, "interrupt-controller"))) {
+		pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
+		of_node_put(np);
+		return;
+	}
+	of_node_put(np);
+
+	pm_data = (const struct exynos_pm_data *) match->data;
+
+	/* All wakeup disable */
+	tmp = pmu_raw_readl(S5P_WAKEUP_MASK);
+	tmp |= pm_data->wake_disable_mask;
+	pmu_raw_writel(tmp, S5P_WAKEUP_MASK);
+
+	exynos_pm_syscore.ops = pm_data->syscore_ops;
+
+	register_syscore(&exynos_pm_syscore);
+	suspend_set_ops(&exynos_suspend_ops);
+
+	/*
+	 * Applicable as of now only to Exynos542x. If booted under secure
+	 * firmware, the non-secure region of sysram should be used.
+	 */
+	if (exynos_secure_firmware_available()) {
+		pm_state.sysram_phys = sysram_base_phys;
+		pm_state.sysram_base = sysram_ns_base_addr;
+		pm_state.secure_firmware = true;
+	} else {
+		pm_state.sysram_base = sysram_base_addr;
+	}
+}