Resguardo inicial

linux-7.2.3/arch/arm/mach-socfpga/Kconfig

@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_INTEL_SOCFPGA
+	bool "Altera SOCFPGA family"
+	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_AMBA
+	select ARM_GIC
+	select CACHE_L2X0
+	select DW_APB_TIMER_OF
+	select GPIO_PL061 if GPIOLIB
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select MFD_SYSCON
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369 if SMP
+	select ARM_ERRATA_775420
+	select PL310_ERRATA_588369
+	select PL310_ERRATA_727915
+	select PL310_ERRATA_753970 if PL310
+	select PL310_ERRATA_769419
+	select RESET_CONTROLLER
+
+if ARCH_INTEL_SOCFPGA
+config SOCFPGA_SUSPEND
+	bool "Suspend to RAM on SOCFPGA"
+	help
+	  Select this if you want to enable Suspend-to-RAM on SOCFPGA
+	  platforms.
+endif

linux-7.2.3/arch/arm/mach-socfpga/Makefile

@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+obj-y					:= socfpga.o
+obj-$(CONFIG_SMP)	+= headsmp.o platsmp.o
+obj-$(CONFIG_SOCFPGA_SUSPEND)	+= pm.o self-refresh.o
+obj-$(CONFIG_EDAC_ALTERA_L2C)	+= l2_cache.o
+obj-$(CONFIG_EDAC_ALTERA_OCRAM)	+= ocram.o

linux-7.2.3/arch/arm/mach-socfpga/core.h

@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2012 Pavel Machek <pavel@denx.de>
+ * Copyright (C) 2012-2015 Altera Corporation
+ */
+
+#ifndef __MACH_CORE_H
+#define __MACH_CORE_H
+
+#define SOCFPGA_RSTMGR_CTRL	0x04
+#define SOCFPGA_RSTMGR_MODMPURST	0x10
+#define SOCFPGA_RSTMGR_MODPERRST	0x14
+#define SOCFPGA_RSTMGR_BRGMODRST	0x1c
+
+#define SOCFPGA_A10_RSTMGR_CTRL		0xC
+#define SOCFPGA_A10_RSTMGR_MODMPURST	0x20
+
+/* System Manager bits */
+#define RSTMGR_CTRL_SWCOLDRSTREQ	0x1	/* Cold Reset */
+#define RSTMGR_CTRL_SWWARMRSTREQ	0x2	/* Warm Reset */
+
+#define RSTMGR_MPUMODRST_CPU1		0x2     /* CPU1 Reset */
+
+void socfpga_init_l2_ecc(void);
+void socfpga_init_ocram_ecc(void);
+void socfpga_init_arria10_l2_ecc(void);
+void socfpga_init_arria10_ocram_ecc(void);
+
+extern void __iomem *sys_manager_base_addr;
+extern void __iomem *rst_manager_base_addr;
+extern void __iomem *sdr_ctl_base_addr;
+
+u32 socfpga_sdram_self_refresh(u32 sdr_base);
+extern unsigned int socfpga_sdram_self_refresh_sz;
+
+extern char secondary_trampoline[], secondary_trampoline_end[];
+
+extern unsigned long socfpga_cpu1start_addr;
+
+#define SOCFPGA_SCU_VIRT_BASE   0xfee00000
+
+#endif

linux-7.2.3/arch/arm/mach-socfpga/headsmp.S

@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  Copyright (c) 2003 ARM Limited
+ *  Copyright (c) u-boot contributors
+ *  Copyright (c) 2012 Pavel Machek <pavel@denx.de>
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/assembler.h>
+
+	.arch	armv7-a
+	.arm
+
+ENTRY(secondary_trampoline)
+	/* CPU1 will always fetch from 0x0 when it is brought out of reset.
+	 * Thus, we can just subtract the PAGE_OFFSET to get the physical
+	 * address of &cpu1start_addr. This would not work for platforms
+	 * where the physical memory does not start at 0x0.
+	*/
+ARM_BE8(setend	be)
+	adr	r0, 1f
+	ldmia	r0, {r1, r2}
+	sub	r2, r2, #PAGE_OFFSET
+	ldr	r3, [r2]
+	ldr	r4, [r3]
+ARM_BE8(rev	r4, r4)
+	bx	r4
+
+	.align
+1:	.long	.
+	.long	socfpga_cpu1start_addr
+ENTRY(secondary_trampoline_end)

linux-7.2.3/arch/arm/mach-socfpga/l2_cache.c

@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2016. All rights reserved.
+ */
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "core.h"
+
+/* A10 System Manager L2 ECC Control register */
+#define A10_MPU_CTRL_L2_ECC_OFST          0x0
+#define A10_MPU_CTRL_L2_ECC_EN            BIT(0)
+
+/* A10 System Manager Global IRQ Mask register */
+#define A10_SYSMGR_ECC_INTMASK_CLR_OFST   0x98
+#define A10_SYSMGR_ECC_INTMASK_CLR_L2     BIT(0)
+
+/* A10 System Manager L2 ECC IRQ Clear register */
+#define A10_SYSMGR_MPU_CLEAR_L2_ECC_OFST  0xA8
+#define A10_SYSMGR_MPU_CLEAR_L2_ECC       (BIT(31) | BIT(15))
+
+void socfpga_init_l2_ecc(void)
+{
+	struct device_node *np;
+	void __iomem *mapped_l2_edac_addr;
+
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-l2-ecc");
+	if (!np) {
+		pr_err("Unable to find socfpga-l2-ecc in dtb\n");
+		return;
+	}
+
+	mapped_l2_edac_addr = of_iomap(np, 0);
+	of_node_put(np);
+	if (!mapped_l2_edac_addr) {
+		pr_err("Unable to find L2 ECC mapping in dtb\n");
+		return;
+	}
+
+	/* Enable ECC */
+	writel(0x01, mapped_l2_edac_addr);
+	iounmap(mapped_l2_edac_addr);
+}
+
+void socfpga_init_arria10_l2_ecc(void)
+{
+	struct device_node *np;
+	void __iomem *mapped_l2_edac_addr;
+
+	/* Find the L2 EDAC device tree node */
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-l2-ecc");
+	if (!np) {
+		pr_err("Unable to find socfpga-a10-l2-ecc in dtb\n");
+		return;
+	}
+
+	mapped_l2_edac_addr = of_iomap(np, 0);
+	of_node_put(np);
+	if (!mapped_l2_edac_addr) {
+		pr_err("Unable to find L2 ECC mapping in dtb\n");
+		return;
+	}
+
+	if (!sys_manager_base_addr) {
+		pr_err("System Manager not mapped for L2 ECC\n");
+		goto exit;
+	}
+	/* Clear any pending IRQs */
+	writel(A10_SYSMGR_MPU_CLEAR_L2_ECC, (sys_manager_base_addr +
+	       A10_SYSMGR_MPU_CLEAR_L2_ECC_OFST));
+	/* Enable ECC */
+	writel(A10_SYSMGR_ECC_INTMASK_CLR_L2, sys_manager_base_addr +
+	       A10_SYSMGR_ECC_INTMASK_CLR_OFST);
+	writel(A10_MPU_CTRL_L2_ECC_EN, mapped_l2_edac_addr +
+	       A10_MPU_CTRL_L2_ECC_OFST);
+exit:
+	iounmap(mapped_l2_edac_addr);
+}

linux-7.2.3/arch/arm/mach-socfpga/ocram.c

@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2016. All rights reserved.
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "core.h"
+
+#define ALTR_OCRAM_CLEAR_ECC          0x00000018
+#define ALTR_OCRAM_ECC_EN             0x00000019
+
+void socfpga_init_ocram_ecc(void)
+{
+	struct device_node *np;
+	void __iomem *mapped_ocr_edac_addr;
+
+	/* Find the OCRAM EDAC device tree node */
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-ocram-ecc");
+	if (!np) {
+		pr_err("Unable to find socfpga-ocram-ecc\n");
+		return;
+	}
+
+	mapped_ocr_edac_addr = of_iomap(np, 0);
+	of_node_put(np);
+	if (!mapped_ocr_edac_addr) {
+		pr_err("Unable to map OCRAM ecc regs.\n");
+		return;
+	}
+
+	/* Clear any pending OCRAM ECC interrupts, then enable ECC */
+	writel(ALTR_OCRAM_CLEAR_ECC, mapped_ocr_edac_addr);
+	writel(ALTR_OCRAM_ECC_EN, mapped_ocr_edac_addr);
+
+	iounmap(mapped_ocr_edac_addr);
+}
+
+/* Arria10 OCRAM Section */
+#define ALTR_A10_ECC_CTRL_OFST          0x08
+#define ALTR_A10_OCRAM_ECC_EN_CTL       (BIT(1) | BIT(0))
+#define ALTR_A10_ECC_INITA              BIT(16)
+
+#define ALTR_A10_ECC_INITSTAT_OFST      0x0C
+#define ALTR_A10_ECC_INITCOMPLETEA      BIT(0)
+#define ALTR_A10_ECC_INITCOMPLETEB      BIT(8)
+
+#define ALTR_A10_ECC_ERRINTEN_OFST      0x10
+#define ALTR_A10_ECC_SERRINTEN          BIT(0)
+
+#define ALTR_A10_ECC_INTSTAT_OFST       0x20
+#define ALTR_A10_ECC_SERRPENA           BIT(0)
+#define ALTR_A10_ECC_DERRPENA           BIT(8)
+#define ALTR_A10_ECC_ERRPENA_MASK       (ALTR_A10_ECC_SERRPENA | \
+					 ALTR_A10_ECC_DERRPENA)
+/* ECC Manager Defines */
+#define A10_SYSMGR_ECC_INTMASK_SET_OFST   0x94
+#define A10_SYSMGR_ECC_INTMASK_CLR_OFST   0x98
+#define A10_SYSMGR_ECC_INTMASK_OCRAM      BIT(1)
+
+#define ALTR_A10_ECC_INIT_WATCHDOG_10US   10000
+
+static inline void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	value |= bit_mask;
+	writel(value, ioaddr);
+}
+
+static inline void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	value &= ~bit_mask;
+	writel(value, ioaddr);
+}
+
+static inline int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	return (value & bit_mask) ? 1 : 0;
+}
+
+/*
+ * This function uses the memory initialization block in the Arria10 ECC
+ * controller to initialize/clear the entire memory data and ECC data.
+ */
+static int altr_init_memory_port(void __iomem *ioaddr)
+{
+	int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
+
+	ecc_set_bits(ALTR_A10_ECC_INITA, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
+	while (limit--) {
+		if (ecc_test_bits(ALTR_A10_ECC_INITCOMPLETEA,
+				  (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
+			break;
+		udelay(1);
+	}
+	if (limit < 0)
+		return -EBUSY;
+
+	/* Clear any pending ECC interrupts */
+	writel(ALTR_A10_ECC_ERRPENA_MASK,
+	       (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
+
+	return 0;
+}
+
+void socfpga_init_arria10_ocram_ecc(void)
+{
+	struct device_node *np;
+	int ret = 0;
+	void __iomem *ecc_block_base;
+
+	if (!sys_manager_base_addr) {
+		pr_err("SOCFPGA: sys-mgr is not initialized\n");
+		return;
+	}
+
+	/* Find the OCRAM EDAC device tree node */
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
+	if (!np) {
+		pr_err("Unable to find socfpga-a10-ocram-ecc\n");
+		return;
+	}
+
+	/* Map the ECC Block */
+	ecc_block_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!ecc_block_base) {
+		pr_err("Unable to map OCRAM ECC block\n");
+		return;
+	}
+
+	/* Disable ECC */
+	writel(ALTR_A10_OCRAM_ECC_EN_CTL,
+	       sys_manager_base_addr + A10_SYSMGR_ECC_INTMASK_SET_OFST);
+	ecc_clear_bits(ALTR_A10_ECC_SERRINTEN,
+		       (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+	ecc_clear_bits(ALTR_A10_OCRAM_ECC_EN_CTL,
+		       (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+
+	/* Ensure all writes complete */
+	wmb();
+
+	/* Use HW initialization block to initialize memory for ECC */
+	ret = altr_init_memory_port(ecc_block_base);
+	if (ret) {
+		pr_err("ECC: cannot init OCRAM PORTA memory\n");
+		goto exit;
+	}
+
+	/* Enable ECC */
+	ecc_set_bits(ALTR_A10_OCRAM_ECC_EN_CTL,
+		     (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+	ecc_set_bits(ALTR_A10_ECC_SERRINTEN,
+		     (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+	writel(ALTR_A10_OCRAM_ECC_EN_CTL,
+	       sys_manager_base_addr + A10_SYSMGR_ECC_INTMASK_CLR_OFST);
+
+	/* Ensure all writes complete */
+	wmb();
+exit:
+	iounmap(ecc_block_base);
+}

linux-7.2.3/arch/arm/mach-socfpga/platsmp.c

@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ * Copyright 2012 Pavel Machek <pavel@denx.de>
+ * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
+ * Copyright (C) 2012 Altera Corporation
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+
+#include "core.h"
+
+static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;
+
+	if (socfpga_cpu1start_addr) {
+		/* This will put CPU #1 into reset. */
+		writel(RSTMGR_MPUMODRST_CPU1,
+		       rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
+
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
+
+		writel(__pa_symbol(secondary_startup),
+		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
+
+		flush_cache_all();
+		smp_wmb();
+		outer_clean_range(0, trampoline_size);
+
+		/* This will release CPU #1 out of reset. */
+		writel(0, rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
+	}
+
+	return 0;
+}
+
+static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;
+
+	if (socfpga_cpu1start_addr) {
+		writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr +
+		       SOCFPGA_A10_RSTMGR_MODMPURST);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
+
+		writel(__pa_symbol(secondary_startup),
+		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff));
+
+		flush_cache_all();
+		smp_wmb();
+		outer_clean_range(0, trampoline_size);
+
+		/* This will release CPU #1 out of reset. */
+		writel(0, rst_manager_base_addr + SOCFPGA_A10_RSTMGR_MODMPURST);
+	}
+
+	return 0;
+}
+
+static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *np;
+	void __iomem *socfpga_scu_base_addr;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+	if (!np) {
+		pr_err("%s: missing scu\n", __func__);
+		return;
+	}
+
+	socfpga_scu_base_addr = of_iomap(np, 0);
+	of_node_put(np);
+	if (!socfpga_scu_base_addr)
+		return;
+	scu_enable(socfpga_scu_base_addr);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+static void socfpga_cpu_die(unsigned int cpu)
+{
+	/* Do WFI. If we wake up early, go back into WFI */
+	while (1)
+		cpu_do_idle();
+}
+
+/*
+ * We need a dummy function so that platform_can_cpu_hotplug() knows
+ * we support CPU hotplug. However, the function does not need to do
+ * anything, because CPUs going offline just do WFI. We could reset
+ * the CPUs but it would increase power consumption.
+ */
+static int socfpga_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+#endif
+
+static const struct smp_operations socfpga_smp_ops __initconst = {
+	.smp_prepare_cpus	= socfpga_smp_prepare_cpus,
+	.smp_boot_secondary	= socfpga_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= socfpga_cpu_die,
+	.cpu_kill		= socfpga_cpu_kill,
+#endif
+};
+
+static const struct smp_operations socfpga_a10_smp_ops __initconst = {
+	.smp_prepare_cpus	= socfpga_smp_prepare_cpus,
+	.smp_boot_secondary	= socfpga_a10_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= socfpga_cpu_die,
+	.cpu_kill		= socfpga_cpu_kill,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(socfpga_smp, "altr,socfpga-smp", &socfpga_smp_ops);
+CPU_METHOD_OF_DECLARE(socfpga_a10_smp, "altr,socfpga-a10-smp", &socfpga_a10_smp_ops);

linux-7.2.3/arch/arm/mach-socfpga/pm.c

@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  arch/arm/mach-socfpga/pm.c
+ *
+ * Copyright (C) 2014-2015 Altera Corporation. All rights reserved.
+ *
+ * with code from pm-imx6.c
+ * Copyright 2011-2014 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+#include <linux/bitops.h>
+#include <linux/genalloc.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include <asm/fncpy.h>
+#include "core.h"
+
+/* Pointer to function copied to ocram */
+static u32 (*socfpga_sdram_self_refresh_in_ocram)(u32 sdr_base);
+
+static int socfpga_setup_ocram_self_refresh(void)
+{
+	struct platform_device *pdev;
+	phys_addr_t ocram_pbase;
+	struct device_node *np;
+	struct gen_pool *ocram_pool;
+	unsigned long ocram_base;
+	void __iomem *suspend_ocram_base;
+	int ret = 0;
+
+	np = of_find_compatible_node(NULL, NULL, "mmio-sram");
+	if (!np) {
+		pr_err("%s: Unable to find mmio-sram in dtb\n", __func__);
+		return -ENODEV;
+	}
+
+	pdev = of_find_device_by_node(np);
+	if (!pdev) {
+		pr_warn("%s: failed to find ocram device!\n", __func__);
+		ret = -ENODEV;
+		goto put_node;
+	}
+
+	ocram_pool = gen_pool_get(&pdev->dev, NULL);
+	if (!ocram_pool) {
+		pr_warn("%s: ocram pool unavailable!\n", __func__);
+		ret = -ENODEV;
+		goto put_device;
+	}
+
+	ocram_base = gen_pool_alloc(ocram_pool, socfpga_sdram_self_refresh_sz);
+	if (!ocram_base) {
+		pr_warn("%s: unable to alloc ocram!\n", __func__);
+		ret = -ENOMEM;
+		goto put_device;
+	}
+
+	ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
+
+	suspend_ocram_base = __arm_ioremap_exec(ocram_pbase,
+						socfpga_sdram_self_refresh_sz,
+						false);
+	if (!suspend_ocram_base) {
+		pr_warn("%s: __arm_ioremap_exec failed!\n", __func__);
+		ret = -ENOMEM;
+		goto put_device;
+	}
+
+	/* Copy the code that puts DDR in self refresh to ocram */
+	socfpga_sdram_self_refresh_in_ocram =
+		(void *)fncpy(suspend_ocram_base,
+			      &socfpga_sdram_self_refresh,
+			      socfpga_sdram_self_refresh_sz);
+
+	WARN(!socfpga_sdram_self_refresh_in_ocram,
+	     "could not copy function to ocram");
+	if (!socfpga_sdram_self_refresh_in_ocram)
+		ret = -EFAULT;
+
+put_device:
+	put_device(&pdev->dev);
+put_node:
+	of_node_put(np);
+
+	return ret;
+}
+
+static int socfpga_pm_suspend(unsigned long arg)
+{
+	u32 ret;
+
+	if (!sdr_ctl_base_addr)
+		return -EFAULT;
+
+	ret = socfpga_sdram_self_refresh_in_ocram((u32)sdr_ctl_base_addr);
+
+	pr_debug("%s self-refresh loops request=%d exit=%d\n", __func__,
+		 ret & 0xffff, (ret >> 16) & 0xffff);
+
+	return 0;
+}
+
+static int socfpga_pm_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		outer_disable();
+		cpu_suspend(0, socfpga_pm_suspend);
+		outer_resume();
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static const struct platform_suspend_ops socfpga_pm_ops = {
+	.valid	= suspend_valid_only_mem,
+	.enter	= socfpga_pm_enter,
+};
+
+static int __init socfpga_pm_init(void)
+{
+	int ret;
+
+	ret = socfpga_setup_ocram_self_refresh();
+	if (ret)
+		return ret;
+
+	suspend_set_ops(&socfpga_pm_ops);
+	pr_info("SoCFPGA initialized for DDR self-refresh during suspend.\n");
+
+	return 0;
+}
+arch_initcall(socfpga_pm_init);

linux-7.2.3/arch/arm/mach-socfpga/self-refresh.S

@@ -0,0 +1,125 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-2015 Altera Corporation. All rights reserved.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#define MAX_LOOP_COUNT		1000
+
+/* Register offset */
+#define SDR_CTRLGRP_LOWPWREQ_ADDR       0x54
+#define SDR_CTRLGRP_LOWPWRACK_ADDR      0x58
+
+/* Bitfield positions */
+#define SELFRSHREQ_POS                  3
+#define SELFRSHREQ_MASK                 0x8
+
+#define SELFRFSHACK_POS                 1
+#define SELFRFSHACK_MASK                0x2
+
+	/*
+	 * This code assumes that when the bootloader configured
+	 * the sdram controller for the DDR on the board it
+	 * configured the following fields depending on the DDR
+	 * vendor/configuration:
+	 *
+	 * sdr.ctrlcfg.lowpwreq.selfrfshmask
+	 * sdr.ctrlcfg.lowpwrtiming.clkdisablecycles
+	 * sdr.ctrlcfg.dramtiming4.selfrfshexit
+	 */
+
+	.arch   armv7-a
+	.text
+	.align 3
+
+	/*
+	 * socfpga_sdram_self_refresh
+	 *
+	 *  r0 : sdr_ctl_base_addr
+	 *  r1 : temp storage of return value
+	 *  r2 : temp storage of register values
+	 *  r3 : loop counter
+	 *
+	 *  return value: lower 16 bits: loop count going into self refresh
+	 *                upper 16 bits: loop count exiting self refresh
+	 */
+ENTRY(socfpga_sdram_self_refresh)
+	/* Enable dynamic clock gating in the Power Control Register. */
+	mrc	p15, 0, r2, c15, c0, 0
+	orr	r2, r2, #1
+	mcr	p15, 0, r2, c15, c0, 0
+
+	/* Enable self refresh: set sdr.ctrlgrp.lowpwreq.selfrshreq = 1 */
+	ldr	r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
+	orr	r2, r2, #SELFRSHREQ_MASK
+	str	r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
+
+	/* Poll until sdr.ctrlgrp.lowpwrack.selfrfshack == 1 or hit max loops */
+	mov	r3, #0
+while_ack_0:
+	ldr	r2, [r0, #SDR_CTRLGRP_LOWPWRACK_ADDR]
+	and	r2, r2, #SELFRFSHACK_MASK
+	cmp	r2, #SELFRFSHACK_MASK
+	beq	ack_1
+
+	add	r3, #1
+	cmp	r3, #MAX_LOOP_COUNT
+	bne	while_ack_0
+
+ack_1:
+	mov	r1, r3
+
+	/*
+	 * Execute an ISB instruction to ensure that all of the
+	 * CP15 register changes have been committed.
+	 */
+	isb
+
+	/*
+	 * Execute a barrier instruction to ensure that all cache,
+	 * TLB and branch predictor maintenance operations issued
+	 * by any CPU in the cluster have completed.
+	 */
+	dsb
+	dmb
+
+	wfi
+
+	/* Disable self-refresh: set sdr.ctrlgrp.lowpwreq.selfrshreq = 0 */
+	ldr	r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
+	bic	r2, r2, #SELFRSHREQ_MASK
+	str	r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
+
+	/* Poll until sdr.ctrlgrp.lowpwrack.selfrfshack == 0 or hit max loops */
+	mov	r3, #0
+while_ack_1:
+	ldr	r2, [r0, #SDR_CTRLGRP_LOWPWRACK_ADDR]
+	and	r2, r2, #SELFRFSHACK_MASK
+	cmp	r2, #SELFRFSHACK_MASK
+	bne	ack_0
+
+	add	r3, #1
+	cmp	r3, #MAX_LOOP_COUNT
+	bne	while_ack_1
+
+ack_0:
+	/*
+	 * Prepare return value:
+	 * Shift loop count for exiting self refresh into upper 16 bits.
+	 * Leave loop count for requesting self refresh in lower 16 bits.
+	 */
+	mov	r3, r3, lsl #16
+	add	r1, r1, r3
+
+	/* Disable dynamic clock gating in the Power Control Register. */
+	mrc	p15, 0, r2, c15, c0, 0
+	bic	r2, r2, #1
+	mcr	p15, 0, r2, c15, c0, 0
+
+	mov     r0, r1                  @ return value
+	bx	lr			@ return
+
+ENDPROC(socfpga_sdram_self_refresh)
+ENTRY(socfpga_sdram_self_refresh_sz)
+	.word	. - socfpga_sdram_self_refresh

linux-7.2.3/arch/arm/mach-socfpga/socfpga.c

@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (C) 2012-2015 Altera Corporation
+ */
+#include <linux/irqchip.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/reboot.h>
+#include <linux/reset/socfpga.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/cacheflush.h>
+
+#include "core.h"
+
+void __iomem *sys_manager_base_addr;
+void __iomem *rst_manager_base_addr;
+void __iomem *sdr_ctl_base_addr;
+unsigned long socfpga_cpu1start_addr;
+
+static void __init socfpga_sysmgr_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "altr,sys-mgr");
+
+	if (of_property_read_u32(np, "cpu1-start-addr",
+			(u32 *) &socfpga_cpu1start_addr))
+		pr_err("SMP: Need cpu1-start-addr in device tree.\n");
+
+	/* Ensure that socfpga_cpu1start_addr is visible to other CPUs */
+	smp_wmb();
+	sync_cache_w(&socfpga_cpu1start_addr);
+
+	sys_manager_base_addr = of_iomap(np, 0);
+
+	np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr");
+	rst_manager_base_addr = of_iomap(np, 0);
+
+	np = of_find_compatible_node(NULL, NULL, "altr,sdr-ctl");
+	sdr_ctl_base_addr = of_iomap(np, 0);
+}
+
+static void __init socfpga_init_irq(void)
+{
+	irqchip_init();
+	socfpga_sysmgr_init();
+	if (IS_ENABLED(CONFIG_EDAC_ALTERA_L2C))
+		socfpga_init_l2_ecc();
+
+	if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
+		socfpga_init_ocram_ecc();
+	socfpga_reset_init();
+}
+
+static void __init socfpga_arria10_init_irq(void)
+{
+	irqchip_init();
+	socfpga_sysmgr_init();
+	if (IS_ENABLED(CONFIG_EDAC_ALTERA_L2C))
+		socfpga_init_arria10_l2_ecc();
+	if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
+		socfpga_init_arria10_ocram_ecc();
+	socfpga_reset_init();
+}
+
+static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
+{
+	u32 temp;
+
+	temp = readl(rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL);
+
+	if (mode == REBOOT_WARM)
+		temp |= RSTMGR_CTRL_SWWARMRSTREQ;
+	else
+		temp |= RSTMGR_CTRL_SWCOLDRSTREQ;
+	writel(temp, rst_manager_base_addr + SOCFPGA_RSTMGR_CTRL);
+}
+
+static void socfpga_arria10_restart(enum reboot_mode mode, const char *cmd)
+{
+	u32 temp;
+
+	temp = readl(rst_manager_base_addr + SOCFPGA_A10_RSTMGR_CTRL);
+
+	if (mode == REBOOT_WARM)
+		temp |= RSTMGR_CTRL_SWWARMRSTREQ;
+	else
+		temp |= RSTMGR_CTRL_SWCOLDRSTREQ;
+	writel(temp, rst_manager_base_addr + SOCFPGA_A10_RSTMGR_CTRL);
+}
+
+static const char *altera_dt_match[] = {
+	"altr,socfpga",
+	NULL
+};
+
+DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.init_irq	= socfpga_init_irq,
+	.restart	= socfpga_cyclone5_restart,
+	.dt_compat	= altera_dt_match,
+MACHINE_END
+
+static const char *altera_a10_dt_match[] = {
+	"altr,socfpga-arria10",
+	NULL
+};
+
+DT_MACHINE_START(SOCFPGA_A10, "Altera SOCFPGA Arria10")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.init_irq	= socfpga_arria10_init_irq,
+	.restart	= socfpga_arria10_restart,
+	.dt_compat	= altera_a10_dt_match,
+MACHINE_END