Resguardo inicial

linux-7.2.3/arch/microblaze/Kbuild

@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y			+= kernel/
+obj-y			+= mm/
+obj-$(CONFIG_PCI)	+= pci/
+obj-y			+= boot/dts/
+
+# for cleaning
+subdir- += boot

linux-7.2.3/arch/microblaze/Kconfig

@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MICROBLAZE
+	def_bool y
+	select ARCH_32BIT_OFF_T
+	select ARCH_NO_SWAP
+	select ARCH_HAS_DMA_PREP_COHERENT
+	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select BUILDTIME_TABLE_SORT
+	select TIMER_OF
+	select CLONE_BACKWARDS3
+	select COMMON_CLK
+	select DMA_DIRECT_REMAP
+	select GENERIC_ATOMIC64
+	select GENERIC_CPU_DEVICES
+	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select GENERIC_PCI_IOMAP
+	select GENERIC_SCHED_CLOCK
+	select HAS_IOPORT if PCI
+	select HAVE_ARCH_HASH
+	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_SECCOMP
+	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DMA_CONTIGUOUS
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_TRACER
+	select HAVE_PAGE_SIZE_4KB
+	select HAVE_PCI
+	select IRQ_DOMAIN
+	select XILINX_INTC
+	select MODULES_USE_ELF_RELA
+	select OF
+	select OF_EARLY_FLATTREE
+	select PCI_DOMAINS_GENERIC if PCI
+	select PCI_SYSCALL if PCI
+	select CPU_NO_EFFICIENT_FFS
+	select MMU_GATHER_NO_RANGE
+	select SPARSE_IRQ
+	select ZONE_DMA
+	select TRACE_IRQFLAGS_SUPPORT
+	select GENERIC_IRQ_MULTI_HANDLER
+
+# Endianness selection
+choice
+	prompt "Endianness selection"
+	default CPU_LITTLE_ENDIAN
+	help
+	  microblaze architectures can be configured for either little or
+	  big endian formats. Be sure to select the appropriate mode.
+
+config CPU_BIG_ENDIAN
+	bool "Big endian"
+
+config CPU_LITTLE_ENDIAN
+	bool "Little endian"
+
+endchoice
+
+config ARCH_HAS_ILOG2_U32
+	def_bool n
+
+config ARCH_HAS_ILOG2_U64
+	def_bool n
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config GENERIC_CSUM
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+source "arch/microblaze/Kconfig.platform"
+
+menu "Processor type and features"
+
+source "kernel/Kconfig.hz"
+
+config MMU
+	def_bool y
+
+comment "Boot options"
+
+config CMDLINE_BOOL
+	bool "Default bootloader kernel arguments"
+
+config CMDLINE
+	string "Default kernel command string"
+	depends on CMDLINE_BOOL
+	default "console=ttyUL0,115200"
+	help
+	  On some architectures there is currently no way for the boot loader
+	  to pass arguments to the kernel. For these architectures, you should
+	  supply some command-line options at build time by entering them
+	  here.
+
+config CMDLINE_FORCE
+	bool "Force default kernel command string"
+	depends on CMDLINE_BOOL
+	default n
+	help
+	  Set this to have arguments from the default kernel command string
+	  override those passed by the boot loader.
+
+endmenu
+
+menu "Kernel features"
+
+config NR_CPUS
+	int
+	default "1"
+
+config ADVANCED_OPTIONS
+	bool "Prompt for advanced kernel configuration options"
+	help
+	  This option will enable prompting for a variety of advanced kernel
+	  configuration options.  These options can cause the kernel to not
+	  work if they are set incorrectly, but can be used to optimize certain
+	  aspects of kernel memory management.
+
+	  Unless you know what you are doing, say N here.
+
+comment "Default settings for advanced configuration options are used"
+	depends on !ADVANCED_OPTIONS
+
+config HIGHMEM
+	bool "High memory support"
+	select KMAP_LOCAL
+	help
+	  The address space of Microblaze processors is only 4 Gigabytes large
+	  and it has to accommodate user address space, kernel address
+	  space as well as some memory mapped IO. That means that, if you
+	  have a large amount of physical memory and/or IO, not all of the
+	  memory can be "permanently mapped" by the kernel. The physical
+	  memory that is not permanently mapped is called "high memory".
+
+	  If unsure, say n.
+
+config LOWMEM_SIZE_BOOL
+	bool "Set maximum low memory"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the maximum amount of memory which
+	  will be used as "low memory", that is, memory which the kernel can
+	  access directly, without having to set up a kernel virtual mapping.
+	  This can be useful in optimizing the layout of kernel virtual
+	  memory.
+
+	  Say N here unless you know what you are doing.
+
+config LOWMEM_SIZE
+	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
+	default "0x30000000"
+
+config MANUAL_RESET_VECTOR
+	hex "Microblaze reset vector address setup"
+	default "0x0"
+	help
+	  Set this option to have the kernel override the CPU Reset vector.
+	  If zero, no change will be made to the MicroBlaze reset vector at
+	  address 0x0.
+	  If non-zero, a jump instruction to this address, will be written
+	  to the reset vector at address 0x0.
+	  If you are unsure, set it to default value 0x0.
+
+config KERNEL_START_BOOL
+	bool "Set custom kernel base address"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the kernel virtual address at which
+	  the kernel will map low memory (the kernel image will be linked at
+	  this address).  This can be useful in optimizing the virtual memory
+	  layout of the system.
+
+	  Say N here unless you know what you are doing.
+
+config KERNEL_START
+	hex "Virtual address of kernel base" if KERNEL_START_BOOL
+	default "0xc0000000"
+
+config TASK_SIZE_BOOL
+	bool "Set custom user task size"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the amount of virtual address space
+	  allocated to user tasks.  This can be useful in optimizing the
+	  virtual memory layout of the system.
+
+	  Say N here unless you know what you are doing.
+
+config TASK_SIZE
+	hex "Size of user task space" if TASK_SIZE_BOOL
+	default "0x80000000"
+
+config MB_MANAGER
+	bool "Support for Microblaze Manager"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option enables API for configuring the MicroBlaze manager
+	  control register, which is consumed by the break handler to
+	  block the break.
+
+	  Say N here unless you know what you are doing.
+
+endmenu

linux-7.2.3/arch/microblaze/Kconfig.debug

@@ -0,0 +1 @@
+# SPDX-License-Identifier: GPL-2.0-only

linux-7.2.3/arch/microblaze/Kconfig.platform

@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.rst.
+#
+# Platform selection Kconfig menu for MicroBlaze targets
+#
+
+menu "Platform options"
+
+config OPT_LIB_FUNCTION
+	bool "Optimized lib function"
+	default y
+	help
+	  Turns on optimized library functions (memcpy and memmove).
+	  They are optimized by using word alignment. This will work
+	  fine if both source and destination are aligned on the same
+	  boundary. However, if they are aligned on different boundaries
+	  shifts will be necessary. This might result in bad performance
+	  on MicroBlaze systems without a barrel shifter.
+
+config OPT_LIB_ASM
+	bool "Optimized lib function ASM"
+	depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1)
+	depends on CPU_BIG_ENDIAN
+	default n
+	help
+	  Turns on optimized library functions (memcpy and memmove).
+	  They are written in assembly.
+
+# Definitions for MICROBLAZE0
+comment "Definitions for MICROBLAZE0"
+
+config KERNEL_BASE_ADDR
+	hex "Physical address where Linux Kernel is"
+	default "0x90000000"
+	help
+	  BASE Address for kernel
+
+config XILINX_MICROBLAZE0_FAMILY
+	string "Targeted FPGA family"
+	default "virtex5"
+
+config XILINX_MICROBLAZE0_USE_MSR_INSTR
+	int "USE_MSR_INSTR range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_PCMP_INSTR
+	int "USE_PCMP_INSTR range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_BARREL
+	int "USE_BARREL range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_DIV
+	int "USE_DIV range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_HW_MUL
+	int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_FPU
+	int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
+	default 0
+
+config XILINX_MICROBLAZE0_HW_VER
+	string "Core version number"
+	default "7.10.d"
+
+endmenu

linux-7.2.3/arch/microblaze/Makefile

@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0
+KBUILD_DEFCONFIG := mmu_defconfig
+
+UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
+
+# What CPU version are we building for, and crack it open
+# as major.minor.rev
+CPU_VER   := $(CONFIG_XILINX_MICROBLAZE0_HW_VER)
+CPU_MAJOR := $(word 1, $(subst ., , $(CPU_VER)))
+CPU_MINOR := $(word 2, $(subst ., , $(CPU_VER)))
+CPU_REV   := $(word 3, $(subst ., , $(CPU_VER)))
+
+export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
+
+# Use cpu-related CONFIG_ vars to set compile options.
+# The various CONFIG_XILINX cpu features options are integers 0/1/2...
+# rather than bools y/n
+
+# Work out HW multipler support. This is tricky.
+# 1. Spartan2 has no HW multipliers.
+# 2. MicroBlaze v3.x always uses them, except in Spartan 2
+# 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings
+ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
+  ifeq ($(CPU_MAJOR),3)
+    CPUFLAGS-1 += -mno-xl-soft-mul
+  else
+    # USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support.
+    CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
+    CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
+  endif
+endif
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
+
+ifdef CONFIG_CPU_BIG_ENDIAN
+KBUILD_CFLAGS += -mbig-endian
+KBUILD_AFLAGS += -mbig-endian
+KBUILD_LDFLAGS += -EB
+else
+KBUILD_CFLAGS += -mlittle-endian
+KBUILD_AFLAGS += -mlittle-endian
+KBUILD_LDFLAGS += -EL
+endif
+
+CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
+
+# r31 holds current when in kernel mode
+KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-y) $(CPUFLAGS-1) $(CPUFLAGS-2)
+
+libs-y += arch/microblaze/lib/
+
+boot := arch/microblaze/boot
+
+# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
+DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
+
+export DTB
+
+all: linux.bin
+
+archheaders:
+	$(Q)$(MAKE) $(build)=arch/microblaze/kernel/syscalls all
+
+PHONY += linux.bin linux.bin.gz linux.bin.ub
+linux.bin.ub linux.bin.gz: linux.bin
+linux.bin: vmlinux
+linux.bin linux.bin.gz linux.bin.ub:
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+	@echo 'Kernel: $(boot)/$@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
+
+PHONY += simpleImage.$(DTB)
+simpleImage.$(DTB): vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(addprefix $(boot)/$@., ub unstrip strip)
+	@echo 'Kernel: $(boot)/$@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
+
+define archhelp
+  echo '* linux.bin    - Create raw binary'
+  echo '  linux.bin.gz - Create compressed raw binary'
+  echo '  linux.bin.ub - Create U-Boot wrapped raw binary'
+  echo '  simpleImage.<dt> - Create the following images with <dt>.dtb linked in'
+  echo '                    simpleImage.<dt>        : raw image'
+  echo '                    simpleImage.<dt>.ub     : raw image with U-Boot header'
+  echo '                    simpleImage.<dt>.unstrip: ELF (identical to vmlinux)'
+  echo '                    simpleImage.<dt>.strip  : stripped ELF'
+  echo '  Targets with <dt> embed a device tree blob inside the image'
+  echo '  These targets support board with firmware that does not'
+  echo '  support passing a device tree directly. Replace <dt> with the'
+  echo '  name of a dts file from the arch/microblaze/boot/dts/ directory'
+  echo '  (minus the .dts extension).'
+endef
+
+MRPROPER_FILES += $(boot)/simpleImage.*

linux-7.2.3/arch/microblaze/boot/.gitignore

@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+linux.bin*
+simpleImage.*

linux-7.2.3/arch/microblaze/boot/Makefile

@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# arch/microblaze/boot/Makefile
+#
+
+targets := linux.bin linux.bin.gz linux.bin.ub simpleImage.*
+
+OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary
+
+$(obj)/linux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/linux.bin.ub: $(obj)/linux.bin FORCE
+	$(call if_changed,uimage)
+
+$(obj)/linux.bin.gz: $(obj)/linux.bin FORCE
+	$(call if_changed,gzip)
+
+quiet_cmd_strip = STRIP   $< $@$2
+	cmd_strip = $(STRIP) -K microblaze_start -K _end -K __log_buf \
+				-K _fdt_start $< -o $@$2
+
+UIMAGE_LOADADDR = $(CONFIG_KERNEL_BASE_ADDR)
+
+$(obj)/simpleImage.$(DTB): vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/simpleImage.$(DTB).ub: $(obj)/simpleImage.$(DTB) FORCE
+	$(call if_changed,uimage)
+
+$(obj)/simpleImage.$(DTB).unstrip: vmlinux FORCE
+	$(call if_changed,copy)
+
+$(obj)/simpleImage.$(DTB).strip: vmlinux FORCE
+	$(call if_changed,strip)

linux-7.2.3/arch/microblaze/boot/dts/Makefile

@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+
+dtb-y := system.dtb
+
+ifneq ($(DTB),)
+obj-y += linked_dtb.o
+
+# Ensure system.dtb exists
+$(obj)/linked_dtb.o: $(obj)/system.dtb
+
+# Generate system.dtb from $(DTB).dtb
+ifneq ($(DTB),system)
+$(obj)/system.dtb: $(obj)/$(DTB).dtb
+	$(call if_changed,copy)
+endif
+endif
+
+# Rule to build device tree blobs
+DTC_FLAGS := -p 1024

linux-7.2.3/arch/microblaze/boot/dts/linked_dtb.S

@@ -0,0 +1,2 @@
+.section __fdt_blob,"a"
+.incbin "arch/microblaze/boot/dts/system.dtb"

linux-7.2.3/arch/microblaze/boot/dts/system.dts

@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree Generator version: 1.1
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
+ */
+
+/dts-v1/;
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,microblaze";
+	model = "testing";
+	DDR2_SDRAM: memory@90000000 {
+		device_type = "memory";
+		reg = < 0x90000000 0x10000000 >;
+	} ;
+	aliases {
+		ethernet0 = &Hard_Ethernet_MAC;
+		serial0 = &RS232_Uart_1;
+	} ;
+	chosen {
+		bootargs = "console=ttyUL0,115200 highres=on";
+		stdout-path = "/plb@0/serial@84000000";
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <0x1>;
+		#size-cells = <0>;
+		microblaze_0: cpu@0 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,microblaze-7.10.d";
+			d-cache-baseaddr = <0x90000000>;
+			d-cache-highaddr = <0x9fffffff>;
+			d-cache-line-size = <0x10>;
+			d-cache-size = <0x2000>;
+			device_type = "cpu";
+			i-cache-baseaddr = <0x90000000>;
+			i-cache-highaddr = <0x9fffffff>;
+			i-cache-line-size = <0x10>;
+			i-cache-size = <0x2000>;
+			model = "microblaze,7.10.d";
+			reg = <0>;
+			timebase-frequency = <125000000>;
+			xlnx,addr-tag-bits = <0xf>;
+			xlnx,allow-dcache-wr = <0x1>;
+			xlnx,allow-icache-wr = <0x1>;
+			xlnx,area-optimized = <0x0>;
+			xlnx,cache-byte-size = <0x2000>;
+			xlnx,d-lmb = <0x1>;
+			xlnx,d-opb = <0x0>;
+			xlnx,d-plb = <0x1>;
+			xlnx,data-size = <0x20>;
+			xlnx,dcache-addr-tag = <0xf>;
+			xlnx,dcache-always-used = <0x1>;
+			xlnx,dcache-byte-size = <0x2000>;
+			xlnx,dcache-line-len = <0x4>;
+			xlnx,dcache-use-fsl = <0x1>;
+			xlnx,debug-enabled = <0x1>;
+			xlnx,div-zero-exception = <0x1>;
+			xlnx,dopb-bus-exception = <0x0>;
+			xlnx,dynamic-bus-sizing = <0x1>;
+			xlnx,edge-is-positive = <0x1>;
+			xlnx,family = "virtex5";
+			xlnx,endianness = <0x1>;
+			xlnx,fpu-exception = <0x1>;
+			xlnx,fsl-data-size = <0x20>;
+			xlnx,fsl-exception = <0x0>;
+			xlnx,fsl-links = <0x0>;
+			xlnx,i-lmb = <0x1>;
+			xlnx,i-opb = <0x0>;
+			xlnx,i-plb = <0x1>;
+			xlnx,icache-always-used = <0x1>;
+			xlnx,icache-line-len = <0x4>;
+			xlnx,icache-use-fsl = <0x1>;
+			xlnx,ill-opcode-exception = <0x1>;
+			xlnx,instance = "microblaze_0";
+			xlnx,interconnect = <0x1>;
+			xlnx,interrupt-is-edge = <0x0>;
+			xlnx,iopb-bus-exception = <0x0>;
+			xlnx,mmu-dtlb-size = <0x4>;
+			xlnx,mmu-itlb-size = <0x2>;
+			xlnx,mmu-tlb-access = <0x3>;
+			xlnx,mmu-zones = <0x10>;
+			xlnx,number-of-pc-brk = <0x1>;
+			xlnx,number-of-rd-addr-brk = <0x0>;
+			xlnx,number-of-wr-addr-brk = <0x0>;
+			xlnx,opcode-0x0-illegal = <0x1>;
+			xlnx,pvr = <0x2>;
+			xlnx,pvr-user1 = <0x0>;
+			xlnx,pvr-user2 = <0x0>;
+			xlnx,reset-msr = <0x0>;
+			xlnx,sco = <0x0>;
+			xlnx,unaligned-exceptions = <0x1>;
+			xlnx,use-barrel = <0x1>;
+			xlnx,use-dcache = <0x1>;
+			xlnx,use-div = <0x1>;
+			xlnx,use-ext-brk = <0x1>;
+			xlnx,use-ext-nm-brk = <0x1>;
+			xlnx,use-extended-fsl-instr = <0x0>;
+			xlnx,use-fpu = <0x2>;
+			xlnx,use-hw-mul = <0x2>;
+			xlnx,use-icache = <0x1>;
+			xlnx,use-interrupt = <0x1>;
+			xlnx,use-mmu = <0x3>;
+			xlnx,use-msr-instr = <0x1>;
+			xlnx,use-pcmp-instr = <0x1>;
+		} ;
+	} ;
+	mb_plb: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
+		ranges ;
+		FLASH: flash@a0000000 {
+			bank-width = <2>;
+			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+			reg = < 0xa0000000 0x2000000 >;
+			xlnx,family = "virtex5";
+			xlnx,include-datawidth-matching-0 = <0x1>;
+			xlnx,include-datawidth-matching-1 = <0x0>;
+			xlnx,include-datawidth-matching-2 = <0x0>;
+			xlnx,include-datawidth-matching-3 = <0x0>;
+			xlnx,include-negedge-ioregs = <0x0>;
+			xlnx,include-plb-ipif = <0x1>;
+			xlnx,include-wrbuf = <0x1>;
+			xlnx,max-mem-width = <0x10>;
+			xlnx,mch-native-dwidth = <0x20>;
+			xlnx,mch-plb-clk-period-ps = <0x1f40>;
+			xlnx,mch-splb-awidth = <0x20>;
+			xlnx,mch0-accessbuf-depth = <0x10>;
+			xlnx,mch0-protocol = <0x0>;
+			xlnx,mch0-rddatabuf-depth = <0x10>;
+			xlnx,mch1-accessbuf-depth = <0x10>;
+			xlnx,mch1-protocol = <0x0>;
+			xlnx,mch1-rddatabuf-depth = <0x10>;
+			xlnx,mch2-accessbuf-depth = <0x10>;
+			xlnx,mch2-protocol = <0x0>;
+			xlnx,mch2-rddatabuf-depth = <0x10>;
+			xlnx,mch3-accessbuf-depth = <0x10>;
+			xlnx,mch3-protocol = <0x0>;
+			xlnx,mch3-rddatabuf-depth = <0x10>;
+			xlnx,mem0-width = <0x10>;
+			xlnx,mem1-width = <0x20>;
+			xlnx,mem2-width = <0x20>;
+			xlnx,mem3-width = <0x20>;
+			xlnx,num-banks-mem = <0x1>;
+			xlnx,num-channels = <0x0>;
+			xlnx,priority-mode = <0x0>;
+			xlnx,synch-mem-0 = <0x0>;
+			xlnx,synch-mem-1 = <0x0>;
+			xlnx,synch-mem-2 = <0x0>;
+			xlnx,synch-mem-3 = <0x0>;
+			xlnx,synch-pipedelay-0 = <0x2>;
+			xlnx,synch-pipedelay-1 = <0x2>;
+			xlnx,synch-pipedelay-2 = <0x2>;
+			xlnx,synch-pipedelay-3 = <0x2>;
+			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+			xlnx,tavdv-ps-mem-1 = <0x3a98>;
+			xlnx,tavdv-ps-mem-2 = <0x3a98>;
+			xlnx,tavdv-ps-mem-3 = <0x3a98>;
+			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+			xlnx,tcedv-ps-mem-1 = <0x3a98>;
+			xlnx,tcedv-ps-mem-2 = <0x3a98>;
+			xlnx,tcedv-ps-mem-3 = <0x3a98>;
+			xlnx,thzce-ps-mem-0 = <0x88b8>;
+			xlnx,thzce-ps-mem-1 = <0x1b58>;
+			xlnx,thzce-ps-mem-2 = <0x1b58>;
+			xlnx,thzce-ps-mem-3 = <0x1b58>;
+			xlnx,thzoe-ps-mem-0 = <0x1b58>;
+			xlnx,thzoe-ps-mem-1 = <0x1b58>;
+			xlnx,thzoe-ps-mem-2 = <0x1b58>;
+			xlnx,thzoe-ps-mem-3 = <0x1b58>;
+			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+			xlnx,tlzwe-ps-mem-1 = <0x0>;
+			xlnx,tlzwe-ps-mem-2 = <0x0>;
+			xlnx,tlzwe-ps-mem-3 = <0x0>;
+			xlnx,twc-ps-mem-0 = <0x2af8>;
+			xlnx,twc-ps-mem-1 = <0x3a98>;
+			xlnx,twc-ps-mem-2 = <0x3a98>;
+			xlnx,twc-ps-mem-3 = <0x3a98>;
+			xlnx,twp-ps-mem-0 = <0x11170>;
+			xlnx,twp-ps-mem-1 = <0x2ee0>;
+			xlnx,twp-ps-mem-2 = <0x2ee0>;
+			xlnx,twp-ps-mem-3 = <0x2ee0>;
+			xlnx,xcl0-linesize = <0x4>;
+			xlnx,xcl0-writexfer = <0x1>;
+			xlnx,xcl1-linesize = <0x4>;
+			xlnx,xcl1-writexfer = <0x1>;
+			xlnx,xcl2-linesize = <0x4>;
+			xlnx,xcl2-writexfer = <0x1>;
+			xlnx,xcl3-linesize = <0x4>;
+			xlnx,xcl3-writexfer = <0x1>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ranges ;
+			ethernet@81c00000 {
+				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 5 2 >;
+				llink-connected = <&PIM3>;
+				local-mac-address = [ 00 0a 35 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <0x1>;
+				xlnx,phy-type = <0x1>;
+				xlnx,phyaddr = <0x1>;
+				xlnx,rxcsum = <0x0>;
+				xlnx,rxfifo = <0x1000>;
+				xlnx,temac-type = <0x0>;
+				xlnx,txcsum = <0x0>;
+				xlnx,txfifo = <0x1000>;
+			} ;
+		} ;
+		IIC_EEPROM: i2c@81600000 {
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81600000 0x10000 >;
+			xlnx,clk-freq = <0x7735940>;
+			xlnx,family = "virtex5";
+			xlnx,gpo-width = <0x1>;
+			xlnx,iic-freq = <0x186a0>;
+			xlnx,scl-inertial-delay = <0x0>;
+			xlnx,sda-inertial-delay = <0x0>;
+			xlnx,ten-bit-adr = <0x0>;
+		} ;
+		LEDs_8Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <0x8>;
+			xlnx,interrupt-present = <0x1>;
+			xlnx,is-bidir = <0x1>;
+			xlnx,is-bidir-2 = <0x1>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		} ;
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&LEDs_8Bit 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&LEDs_8Bit 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&LEDs_8Bit 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&LEDs_8Bit 7 1>;
+			};
+		} ;
+
+		gpio-restart {
+			compatible = "gpio-restart";
+			/*
+			 * FIXME: is this active low or active high?
+			 * the current flag (1) indicates active low.
+			 * delay measures are templates, should be adjusted
+			 * to datasheet or trial-and-error with real hardware.
+			 */
+			gpios = <&LEDs_8Bit 2 1>;
+			active-delay = <100>;
+			inactive-delay = <10>;
+			wait-delay = <100>;
+		};
+
+		RS232_Uart_1: serial@84000000 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,xps-uartlite-1.00.a";
+			current-speed = <115200>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 8 0 >;
+			port-number = <0>;
+			reg = < 0x84000000 0x10000 >;
+			xlnx,baudrate = <0x1c200>;
+			xlnx,data-bits = <0x8>;
+			xlnx,family = "virtex5";
+			xlnx,odd-parity = <0x0>;
+			xlnx,use-parity = <0x0>;
+		} ;
+		debug_module: debug@84400000 {
+			compatible = "xlnx,mdm-1.00.d";
+			reg = < 0x84400000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,interconnect = <0x1>;
+			xlnx,jtag-chain = <0x2>;
+			xlnx,mb-dbg-ports = <0x1>;
+			xlnx,uart-width = <0x8>;
+			xlnx,use-uart = <0x1>;
+			xlnx,write-fsl-ports = <0x0>;
+		} ;
+		mpmc@90000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,mpmc-4.02.a";
+			ranges ;
+			PIM3: sdma@84600180 {
+				compatible = "xlnx,ll-dma-1.00.a";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 2 2 1 2 >;
+				reg = < 0x84600180 0x80 >;
+			} ;
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <0x2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,kind-of-intr = <0x100>;
+			xlnx,num-intr-inputs = <0x9>;
+		} ;
+		xps_timer_1: timer@83c00000 {
+			compatible = "xlnx,xps-timer-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 3 2 >;
+			reg = < 0x83c00000 0x10000 >;
+			xlnx,count-width = <0x20>;
+			xlnx,one-timer-only = <0x0>;
+		} ;
+	} ;
+}  ;

linux-7.2.3/arch/microblaze/configs/mmu_defconfig

@@ -0,0 +1,91 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_EXPERT=y
+CONFIG_BASE_SMALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
+CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
+CONFIG_HZ_100=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_HIGHMEM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_CMA=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_BRIDGE=m
+CONFIG_PCI=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_XILINX_AXI_EMAC=y
+CONFIG_XILINX_LL_TEMAC=y
+CONFIG_MARVELL_PHY=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_XILINX_HWICAP=y
+CONFIG_I2C=y
+CONFIG_I2C_XILINX=y
+CONFIG_SPI=y
+CONFIG_SPI_XILINX=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_XILINX=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_XILINX_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_XILINX=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
+CONFIG_UIO_DMEM_GENIRQ=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_CIFS=y
+CONFIG_ENCRYPTED_KEYS=y
+CONFIG_DMA_CMA=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_KGDB=y
+CONFIG_KGDB_TESTS=y
+CONFIG_KGDB_KDB=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SPINLOCK=y

linux-7.2.3/arch/microblaze/include/asm/Kbuild

@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+generated-y += syscall_table.h
+generic-y += cmpxchg.h
+generic-y += extable.h
+generic-y += kvm_para.h
+generic-y += mcs_spinlock.h
+generic-y += parport.h
+generic-y += ring_buffer.h
+generic-y += syscalls.h
+generic-y += tlb.h
+generic-y += user.h
+generic-y += text-patching.h

linux-7.2.3/arch/microblaze/include/asm/asm-compat.h

@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_MICROBLAZE_ASM_COMPAT_H
+#define _ASM_MICROBLAZE_ASM_COMPAT_H
+
+#include <asm/types.h>
+
+#ifdef __ASSEMBLER__
+#  define stringify_in_c(...)	__VA_ARGS__
+#  define ASM_CONST(x)		x
+#else
+/* This version of stringify will deal with commas... */
+#  define __stringify_in_c(...)	#__VA_ARGS__
+#  define stringify_in_c(...)	__stringify_in_c(__VA_ARGS__) " "
+#  define __ASM_CONST(x)	x##UL
+#  define ASM_CONST(x)		__ASM_CONST(x)
+#endif
+
+#endif /* _ASM_MICROBLAZE_ASM_COMPAT_H */

linux-7.2.3/arch/microblaze/include/asm/asm-offsets.h

@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>

linux-7.2.3/arch/microblaze/include/asm/barrier.h

@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015 - 2020 Xilinx, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_MICROBLAZE_BARRIER_H
+#define _ASM_MICROBLAZE_BARRIER_H
+
+#define mb()	__asm__ __volatile__ ("mbar 1" : : : "memory")
+
+#include <asm-generic/barrier.h>
+
+#endif /* _ASM_MICROBLAZE_BARRIER_H */

linux-7.2.3/arch/microblaze/include/asm/cache.h

@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cache operations
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2003 John Williams <jwilliams@itee.uq.edu.au>
+ */
+
+#ifndef _ASM_MICROBLAZE_CACHE_H
+#define _ASM_MICROBLAZE_CACHE_H
+
+#include <asm/registers.h>
+
+#define L1_CACHE_SHIFT 5
+/* word-granular cache in microblaze */
+#define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
+
+#define SMP_CACHE_BYTES	L1_CACHE_BYTES
+
+/* MS be sure that SLAB allocates aligned objects */
+#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
+
+#define ARCH_SLAB_MINALIGN	L1_CACHE_BYTES
+
+#endif /* _ASM_MICROBLAZE_CACHE_H */

linux-7.2.3/arch/microblaze/include/asm/cacheflush.h

@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ * based on v850 version which was
+ * Copyright (C) 2001,02,03 NEC Electronics Corporation
+ * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
+ */
+
+#ifndef _ASM_MICROBLAZE_CACHEFLUSH_H
+#define _ASM_MICROBLAZE_CACHEFLUSH_H
+
+/* Somebody depends on this; sigh... */
+#include <linux/mm.h>
+#include <linux/io.h>
+
+/* Look at Documentation/core-api/cachetlb.rst */
+
+/*
+ * Cache handling functions.
+ * Microblaze has a write-through data cache, meaning that the data cache
+ * never needs to be flushed.  The only flushing operations that are
+ * implemented are to invalidate the instruction cache.  These are called
+ * after loading a user application into memory, we must invalidate the
+ * instruction cache to make sure we don't fetch old, bad code.
+ */
+
+/* struct cache, d=dcache, i=icache, fl = flush, iv = invalidate,
+ * suffix r = range */
+struct scache {
+	/* icache */
+	void (*ie)(void); /* enable */
+	void (*id)(void); /* disable */
+	void (*ifl)(void); /* flush */
+	void (*iflr)(unsigned long a, unsigned long b);
+	void (*iin)(void); /* invalidate */
+	void (*iinr)(unsigned long a, unsigned long b);
+	/* dcache */
+	void (*de)(void); /* enable */
+	void (*dd)(void); /* disable */
+	void (*dfl)(void); /* flush */
+	void (*dflr)(unsigned long a, unsigned long b);
+	void (*din)(void); /* invalidate */
+	void (*dinr)(unsigned long a, unsigned long b);
+};
+
+/* microblaze cache */
+extern struct scache *mbc;
+
+void microblaze_cache_init(void);
+
+#define enable_icache()					mbc->ie();
+#define disable_icache()				mbc->id();
+#define flush_icache()					mbc->ifl();
+#define flush_icache_range(start, end)			mbc->iflr(start, end);
+#define invalidate_icache()				mbc->iin();
+#define invalidate_icache_range(start, end)		mbc->iinr(start, end);
+
+#define enable_dcache()					mbc->de();
+#define disable_dcache()				mbc->dd();
+/* FIXME for LL-temac driver */
+#define invalidate_dcache()				mbc->din();
+#define invalidate_dcache_range(start, end)		mbc->dinr(start, end);
+#define flush_dcache()					mbc->dfl();
+#define flush_dcache_range(start, end)			mbc->dflr(start, end);
+
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+/* MS: We have to implement it because of rootfs-jffs2 issue on WB */
+#define flush_dcache_page(page) \
+do { \
+	unsigned long addr = (unsigned long) page_address(page); /* virtual */ \
+	addr = (u32)virt_to_phys((void *)addr); \
+	flush_dcache_range((unsigned) (addr), (unsigned) (addr) + PAGE_SIZE); \
+} while (0);
+
+static inline void flush_dcache_folio(struct folio *folio)
+{
+	unsigned long addr = folio_pfn(folio) << PAGE_SHIFT;
+
+	flush_dcache_range(addr, addr + folio_size(folio));
+}
+#define flush_dcache_folio flush_dcache_folio
+
+#define flush_cache_page(vma, vmaddr, pfn) \
+	flush_dcache_range(pfn << PAGE_SHIFT, (pfn << PAGE_SHIFT) + PAGE_SIZE);
+
+static inline void copy_to_user_page(struct vm_area_struct *vma,
+				     struct page *page, unsigned long vaddr,
+				     void *dst, void *src, int len)
+{
+	u32 addr = virt_to_phys(dst);
+	memcpy(dst, src, len);
+	if (vma->vm_flags & VM_EXEC) {
+		invalidate_icache_range(addr, addr + PAGE_SIZE);
+		flush_dcache_range(addr, addr + PAGE_SIZE);
+	}
+}
+#define copy_to_user_page copy_to_user_page
+
+#include <asm-generic/cacheflush.h>
+
+#endif /* _ASM_MICROBLAZE_CACHEFLUSH_H */

linux-7.2.3/arch/microblaze/include/asm/checksum.h

@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_CHECKSUM_H
+#define _ASM_MICROBLAZE_CHECKSUM_H
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+#define csum_tcpudp_nofold	csum_tcpudp_nofold
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		   __u8 proto, __wsum sum)
+{
+	__asm__("add %0, %0, %1\n\t"
+		"addc %0, %0, %2\n\t"
+		"addc %0, %0, %3\n\t"
+		"addc %0, %0, r0\n\t"
+		: "+&d" (sum)
+		: "d" (saddr), "d" (daddr),
+#ifdef __MICROBLAZEEL__
+	"d" ((len + proto) << 8)
+#else
+	"d" (len + proto)
+#endif
+);
+	return sum;
+}
+
+#include <asm-generic/checksum.h>
+
+#endif /* _ASM_MICROBLAZE_CHECKSUM_H */

linux-7.2.3/arch/microblaze/include/asm/cpuinfo.h

@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Generic support for queying CPU info
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <jwilliams@itee.uq.edu.au>
+ */
+
+#ifndef _ASM_MICROBLAZE_CPUINFO_H
+#define _ASM_MICROBLAZE_CPUINFO_H
+
+#include <linux/of.h>
+
+/* CPU Version and FPGA Family code conversion table type */
+struct cpu_ver_key {
+	const char *s;
+	const unsigned k;
+};
+
+extern const struct cpu_ver_key cpu_ver_lookup[];
+
+struct family_string_key {
+	const char *s;
+	const unsigned k;
+};
+
+extern const struct family_string_key family_string_lookup[];
+
+struct cpuinfo {
+	/* Core CPU configuration */
+	u32 use_instr;
+	u32 use_mult;
+	u32 use_fpu;
+	u32 use_exc;
+	u32 ver_code;
+	u32 mmu;
+	u32 mmu_privins;
+	u32 endian;
+
+	/* CPU caches */
+	u32 use_icache;
+	u32 icache_tagbits;
+	u32 icache_write;
+	u32 icache_line_length;
+	u32 icache_size;
+	unsigned long icache_base;
+	unsigned long icache_high;
+
+	u32 use_dcache;
+	u32 dcache_tagbits;
+	u32 dcache_write;
+	u32 dcache_line_length;
+	u32 dcache_size;
+	u32 dcache_wb;
+	unsigned long dcache_base;
+	unsigned long dcache_high;
+
+	/* Bus connections */
+	u32 use_dopb;
+	u32 use_iopb;
+	u32 use_dlmb;
+	u32 use_ilmb;
+	u32 num_fsl;
+
+	/* CPU interrupt line info */
+	u32 irq_edge;
+	u32 irq_positive;
+
+	u32 area_optimised;
+
+	/* HW debug support */
+	u32 hw_debug;
+	u32 num_pc_brk;
+	u32 num_rd_brk;
+	u32 num_wr_brk;
+	u32 cpu_clock_freq; /* store real freq of cpu */
+
+	/* FPGA family */
+	u32 fpga_family_code;
+
+	/* User define */
+	u32 pvr_user1;
+	u32 pvr_user2;
+};
+
+extern struct cpuinfo cpuinfo;
+
+/* fwd declarations of the various CPUinfo populators */
+void setup_cpuinfo(void);
+void setup_cpuinfo_clk(void);
+
+void set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu);
+void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu);
+
+static inline unsigned int fcpu(struct device_node *cpu, char *n)
+{
+	u32 val = 0;
+
+	of_property_read_u32(cpu, n, &val);
+
+	return val;
+}
+
+#endif /* _ASM_MICROBLAZE_CPUINFO_H */

linux-7.2.3/arch/microblaze/include/asm/current.h

@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_CURRENT_H
+#define _ASM_MICROBLAZE_CURRENT_H
+
+/*
+ * Register used to hold the current task pointer while in the kernel.
+ * Any `call clobbered' register without a special meaning should be OK,
+ * but check asm/microblaze/kernel/entry.S to be sure.
+ */
+#define CURRENT_TASK	r31
+# ifndef __ASSEMBLER__
+/*
+ * Dedicate r31 to keeping the current task pointer
+ */
+register struct task_struct *current asm("r31");
+
+# define get_current()	current
+# endif /* __ASSEMBLER__ */
+
+#endif /* _ASM_MICROBLAZE_CURRENT_H */

linux-7.2.3/arch/microblaze/include/asm/delay.h

@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2007 John Williams
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_DELAY_H
+#define _ASM_MICROBLAZE_DELAY_H
+
+#include <linux/param.h>
+
+static inline void __delay(unsigned long loops)
+{
+	asm volatile ("# __delay		\n\t"		\
+			"1: addi	%0, %0, -1\t\n"		\
+			"bneid	%0, 1b		\t\n"		\
+			"nop			\t\n"
+			: "=r" (loops)
+			: "0" (loops));
+}
+
+/*
+ * Note that 19 * 226 == 4294 ==~ 2^32 / 10^6, so
+ * loops = (4294 * usecs * loops_per_jiffy * HZ) / 2^32.
+ *
+ * The mul instruction gives us loops = (a * b) / 2^32.
+ * We choose a = usecs * 19 * HZ and b = loops_per_jiffy * 226
+ * because this lets us support a wide range of HZ and
+ * loops_per_jiffy values without either a or b overflowing 2^32.
+ * Thus we need usecs * HZ <= (2^32 - 1) / 19 = 226050910 and
+ * loops_per_jiffy <= (2^32 - 1) / 226 = 19004280
+ * (which corresponds to ~3800 bogomips at HZ = 100).
+ * -- paulus
+ */
+#define __MAX_UDELAY	(226050910UL/HZ)	/* maximum udelay argument */
+#define __MAX_NDELAY	(4294967295UL/HZ)	/* maximum ndelay argument */
+
+extern unsigned long loops_per_jiffy;
+
+static inline void __udelay(unsigned int x)
+{
+
+	unsigned long long tmp =
+		(unsigned long long)x * (unsigned long long)loops_per_jiffy \
+			* 226LL;
+	unsigned loops = tmp >> 32;
+
+/*
+	__asm__("mulxuu %0,%1,%2" : "=r" (loops) :
+		"r" (x), "r" (loops_per_jiffy * 226));
+*/
+	__delay(loops);
+}
+
+extern void __bad_udelay(void);		/* deliberately undefined */
+extern void __bad_ndelay(void);		/* deliberately undefined */
+
+#define udelay(n)						\
+	({							\
+		if (__builtin_constant_p(n)) {			\
+			if ((n) / __MAX_UDELAY >= 1)		\
+				__bad_udelay();			\
+			else					\
+				__udelay((n) * (19 * HZ));	\
+		} else {					\
+			__udelay((n) * (19 * HZ));		\
+		}						\
+	})
+
+#define ndelay(n)						\
+	({							\
+		if (__builtin_constant_p(n)) {			\
+			if ((n) / __MAX_NDELAY >= 1)		\
+				__bad_ndelay();			\
+			else					\
+				__udelay((n) * HZ);		\
+		} else {					\
+			__udelay((n) * HZ);			\
+		}						\
+	})
+
+#define muldiv(a, b, c)		(((a)*(b))/(c))
+
+#endif /* _ASM_MICROBLAZE_DELAY_H */

linux-7.2.3/arch/microblaze/include/asm/dma.h

@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_DMA_H
+#define _ASM_MICROBLAZE_DMA_H
+
+/* Virtual address corresponding to last available physical memory address.  */
+#define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
+
+#endif /* _ASM_MICROBLAZE_DMA_H */

linux-7.2.3/arch/microblaze/include/asm/elf.h

@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+#ifndef _ASM_MICROBLAZE_ELF_H
+#define _ASM_MICROBLAZE_ELF_H
+
+#include <uapi/asm/elf.h>
+
+#ifndef __uClinux__
+#ifndef ELF_GREG_T
+#endif
+#ifndef ELF_NGREG
+#endif
+#ifndef ELF_GREGSET_T
+#endif
+#ifndef ELF_FPREGSET_T
+#endif
+#ifdef __MICROBLAZEEL__
+#else
+#endif
+#define SET_PERSONALITY(ex) \
+	set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK)))
+#endif /* __uClinux__ */
+#endif /* _ASM_MICROBLAZE_ELF_H */

linux-7.2.3/arch/microblaze/include/asm/entry.h

@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Definitions used by low-level trap handlers
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ */
+
+#ifndef _ASM_MICROBLAZE_ENTRY_H
+#define _ASM_MICROBLAZE_ENTRY_H
+
+#include <asm/percpu.h>
+#include <asm/ptrace.h>
+#include <linux/linkage.h>
+
+/*
+ * These are per-cpu variables required in entry.S, among other
+ * places
+ */
+
+#define PER_CPU(var) var
+
+# ifndef __ASSEMBLER__
+DECLARE_PER_CPU(unsigned int, KSP); /* Saved kernel stack pointer */
+DECLARE_PER_CPU(unsigned int, KM); /* Kernel/user mode */
+DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */
+DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
+DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
+
+extern asmlinkage void do_notify_resume(struct pt_regs *regs, int in_syscall);
+# endif /* __ASSEMBLER__ */
+
+#endif /* _ASM_MICROBLAZE_ENTRY_H */

linux-7.2.3/arch/microblaze/include/asm/exceptions.h

@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Preliminary support for HW exception handing for Microblaze
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
+ */
+
+#ifndef _ASM_MICROBLAZE_EXCEPTIONS_H
+#define _ASM_MICROBLAZE_EXCEPTIONS_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLER__
+
+/* Macros to enable and disable HW exceptions in the MSR */
+/* Define MSR enable bit for HW exceptions */
+#define HWEX_MSR_BIT (1 << 8)
+
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+#define __enable_hw_exceptions()					\
+	__asm__ __volatile__ ("	msrset	r0, %0;				\
+				nop;"					\
+				:					\
+				: "i" (HWEX_MSR_BIT)			\
+				: "memory")
+
+#define __disable_hw_exceptions()					\
+	__asm__ __volatile__ ("	msrclr r0, %0;				\
+				nop;"					\
+				:					\
+				: "i" (HWEX_MSR_BIT)			\
+				: "memory")
+#else /* !CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
+#define __enable_hw_exceptions()					\
+	__asm__ __volatile__ ("						\
+				mfs	r12, rmsr;			\
+				nop;					\
+				ori	r12, r12, %0;			\
+				mts	rmsr, r12;			\
+				nop;"					\
+				:					\
+				: "i" (HWEX_MSR_BIT)			\
+				: "memory", "r12")
+
+#define __disable_hw_exceptions()					\
+	__asm__ __volatile__ ("						\
+				mfs	r12, rmsr;			\
+				nop;					\
+				andi	r12, r12, ~%0;			\
+				mts	rmsr, r12;			\
+				nop;"					\
+				:					\
+				: "i" (HWEX_MSR_BIT)			\
+				: "memory", "r12")
+#endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
+
+asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
+							int fsr, int addr);
+
+asmlinkage void sw_exception(struct pt_regs *regs);
+void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig);
+
+void die(const char *str, struct pt_regs *fp, long err);
+void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
+
+#endif /*__ASSEMBLER__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_EXCEPTIONS_H */

linux-7.2.3/arch/microblaze/include/asm/fixmap.h

@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *   Port to powerpc added by Kumar Gala
+ *
+ * Copyright 2011 Michal Simek <monstr@monstr.eu>
+ * Copyright 2011 PetaLogix Qld Pty Ltd
+ *   Port to Microblaze
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#ifndef __ASSEMBLER__
+#include <linux/kernel.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_size.h>
+#endif
+
+#define FIXADDR_TOP	((unsigned long)(-PAGE_SIZE))
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+enum fixed_addresses {
+	FIX_HOLE,
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN + (KM_MAX_IDX * num_possible_cpus()) - 1,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap(enum fixed_addresses idx,
+					phys_addr_t phys, pgprot_t flags);
+
+#define __FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START		(FIXADDR_TOP - __FIXADDR_SIZE)
+
+#define FIXMAP_PAGE_NOCACHE PAGE_KERNEL_CI
+
+#include <asm-generic/fixmap.h>
+
+#endif /* !__ASSEMBLER__ */
+#endif

linux-7.2.3/arch/microblaze/include/asm/flat.h

@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * uClinux flat-format executables
+ *
+ * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
+ */
+
+#ifndef _ASM_MICROBLAZE_FLAT_H
+#define _ASM_MICROBLAZE_FLAT_H
+
+#include <linux/unaligned.h>
+
+/*
+ * Microblaze works a little differently from other arches, because
+ * of the MICROBLAZE_64 reloc type. Here, a 32 bit address is split
+ * over two instructions, an 'imm' instruction which provides the top
+ * 16 bits, then the instruction "proper" which provides the low 16
+ * bits.
+ */
+
+/*
+ * Crack open a symbol reference and extract the address to be
+ * relocated. rp is a potentially unaligned pointer to the
+ * reference
+ */
+
+static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
+					u32 *addr)
+{
+	u32 *p = (__force u32 *)rp;
+
+	/* Is it a split 64/32 reference? */
+	if (relval & 0x80000000) {
+		/* Grab the two halves of the reference */
+		u32 val_hi, val_lo;
+
+		val_hi = get_unaligned(p);
+		val_lo = get_unaligned(p+1);
+
+		/* Crack the address out */
+		*addr = ((val_hi & 0xffff) << 16) + (val_lo & 0xffff);
+	} else {
+		/* Get the address straight out */
+		*addr = get_unaligned(p);
+	}
+
+	return 0;
+}
+
+/*
+ * Insert an address into the symbol reference at rp. rp is potentially
+ * unaligned.
+ */
+
+static inline int
+flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 relval)
+{
+	u32 *p = (__force u32 *)rp;
+	/* Is this a split 64/32 reloc? */
+	if (relval & 0x80000000) {
+		/* Get the two "halves" */
+		unsigned long val_hi = get_unaligned(p);
+		unsigned long val_lo = get_unaligned(p + 1);
+
+		/* insert the address */
+		val_hi = (val_hi & 0xffff0000) | addr >> 16;
+		val_lo = (val_lo & 0xffff0000) | (addr & 0xffff);
+
+		/* store the two halves back into memory */
+		put_unaligned(val_hi, p);
+		put_unaligned(val_lo, p+1);
+	} else {
+		/* Put it straight in, no messing around */
+		put_unaligned(addr, p);
+	}
+	return 0;
+}
+
+#define	flat_get_relocate_addr(rel)	(rel & 0x7fffffff)
+
+#endif /* _ASM_MICROBLAZE_FLAT_H */

linux-7.2.3/arch/microblaze/include/asm/ftrace.h

@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_MICROBLAZE_FTRACE
+#define _ASM_MICROBLAZE_FTRACE
+
+#ifdef CONFIG_FUNCTION_TRACER
+
+#define MCOUNT_ADDR		((unsigned long)(_mcount))
+#define MCOUNT_INSN_SIZE	8 /* sizeof mcount call */
+
+#ifndef __ASSEMBLER__
+extern void _mcount(void);
+extern void ftrace_call_graph(void);
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr);
+#endif
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+/* relocation of mcount call site is the same as the address */
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+
+struct dyn_arch_ftrace {
+};
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#endif /* CONFIG_FUNCTION_TRACER */
+#endif /* _ASM_MICROBLAZE_FTRACE */

linux-7.2.3/arch/microblaze/include/asm/futex.h

@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_MICROBLAZE_FUTEX_H
+#define _ASM_MICROBLAZE_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+({									\
+	__asm__ __volatile__ (						\
+			"1:	lwx	%0, %2, r0; "			\
+				insn					\
+			"2:	swx	%1, %2, r0;			\
+				addic	%1, r0, 0;			\
+				bnei	%1, 1b;				\
+			3:						\
+			.section .fixup,\"ax\";				\
+			4:	brid	3b;				\
+				addik	%1, r0, %3;			\
+			.previous;					\
+			.section __ex_table,\"a\";			\
+			.word	1b,4b,2b,4b;				\
+			.previous;"					\
+	: "=&r" (oldval), "=&r" (ret)					\
+	: "r" (uaddr), "i" (-EFAULT), "r" (oparg)			\
+	);								\
+})
+
+static inline int
+arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
+{
+	int oldval = 0, ret;
+
+	if (!access_ok(uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("or %1,%4,%4;", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("add %1,%0,%4;", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("or %1,%0,%4;", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("andn %1,%0,%4;", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("xor %1,%0,%4;", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	if (!ret)
+		*oval = oldval;
+
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+			      u32 oldval, u32 newval)
+{
+	int ret = 0, cmp;
+	u32 prev;
+
+	if (!access_ok(uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	__asm__ __volatile__ ("1:	lwx	%1, %3, r0;		\
+					cmp	%2, %1, %4;		\
+					bnei	%2, 3f;			\
+				2:	swx	%5, %3, r0;		\
+					addic	%2, r0, 0;		\
+					bnei	%2, 1b;			\
+				3:					\
+				.section .fixup,\"ax\";			\
+				4:	brid	3b;			\
+					addik	%0, r0, %6;		\
+				.previous;				\
+				.section __ex_table,\"a\";		\
+				.word	1b,4b,2b,4b;			\
+				.previous;"				\
+		: "+r" (ret), "=&r" (prev), "=&r"(cmp)	\
+		: "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT));
+
+	*uval = prev;
+	return ret;
+}
+
+#endif /* __KERNEL__ */
+
+#endif

linux-7.2.3/arch/microblaze/include/asm/hash.h

@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_HASH_H
+#define _ASM_HASH_H
+
+/*
+ * Fortunately, most people who want to run Linux on Microblaze enable
+ * both multiplier and barrel shifter, but omitting them is technically
+ * a supported configuration.
+ *
+ * With just a barrel shifter, we can implement an efficient constant
+ * multiply using shifts and adds.  GCC can find a 9-step solution, but
+ * this 6-step solution was found by Yevgen Voronenko's implementation
+ * of the Hcub algorithm at http://spiral.ece.cmu.edu/mcm/gen.html.
+ *
+ * That software is really not designed for a single multiplier this large,
+ * but if you run it enough times with different seeds, it'll find several
+ * 6-shift, 6-add sequences for computing x * 0x61C88647.  They are all
+ *	c = (x << 19) + x;
+ *	a = (x <<  9) + c;
+ *	b = (x << 23) + a;
+ *	return (a<<11) + (b<<6) + (c<<3) - b;
+ * with variations on the order of the final add.
+ *
+ * Without even a shifter, it's hopless; any hash function will suck.
+ */
+
+#if CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL == 0
+
+#define HAVE_ARCH__HASH_32 1
+
+/* Multiply by GOLDEN_RATIO_32 = 0x61C88647 */
+static inline u32 __attribute_const__ __hash_32(u32 a)
+{
+#if CONFIG_XILINX_MICROBLAZE0_USE_BARREL
+	unsigned int b, c;
+
+	/* Phase 1: Compute three intermediate values */
+	b =  a << 23;
+	c = (a << 19) + a;
+	a = (a <<  9) + c;
+	b += a;
+
+	/* Phase 2: Compute (a << 11) + (b << 6) + (c << 3) - b */
+	a <<= 5;
+	a += b;		/* (a << 5) + b */
+	a <<= 3;
+	a += c;		/* (a << 8) + (b << 3) + c */
+	a <<= 3;
+	return a - b;	/* (a << 11) + (b << 6) + (c << 3) - b */
+#else
+	/*
+	 * "This is really going to hurt."
+	 *
+	 * Without a barrel shifter, left shifts are implemented as
+	 * repeated additions, and the best we can do is an optimal
+	 * addition-subtraction chain.  This one is not known to be
+	 * optimal, but at 37 steps, it's decent for a 31-bit multiplier.
+	 *
+	 * Question: given its size (37*4 = 148 bytes per instance),
+	 * and slowness, is this worth having inline?
+	 */
+	unsigned int b, c, d;
+
+	b = a << 4;	/* 4    */
+	c = b << 1;	/* 1  5 */
+	b += a;		/* 1  6 */
+	c += b;		/* 1  7 */
+	c <<= 3;	/* 3 10 */
+	c -= a;		/* 1 11 */
+	d = c << 7;	/* 7 18 */
+	d += b;		/* 1 19 */
+	d <<= 8;	/* 8 27 */
+	d += a;		/* 1 28 */
+	d <<= 1;	/* 1 29 */
+	d += b;		/* 1 30 */
+	d <<= 6;	/* 6 36 */
+	return d + c;	/* 1 37 total instructions*/
+#endif
+}
+
+#endif /* !CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL */
+#endif /* _ASM_HASH_H */

linux-7.2.3/arch/microblaze/include/asm/highmem.h

@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <asm/fixmap.h>
+
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+/*
+ * We use one full pte table with 4K pages. And with 16K/64K/256K pages pte
+ * table covers enough memory (32MB/512MB/2GB resp.), so that both FIXMAP
+ * and PKMAP can be placed in a single pte table. We use 512 pages for PKMAP
+ * in case of 16K/64K/256K page sizes.
+ */
+
+#define PKMAP_ORDER	PTE_SHIFT
+#define LAST_PKMAP	(1 << PKMAP_ORDER)
+
+#define PKMAP_BASE	((FIXADDR_START - PAGE_SIZE * (LAST_PKMAP + 1)) \
+								& PMD_MASK)
+
+#define LAST_PKMAP_MASK	(LAST_PKMAP - 1)
+#define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define flush_cache_kmaps()	{ flush_icache(); flush_dcache(); }
+
+#define arch_kmap_local_post_map(vaddr, pteval)	\
+	local_flush_tlb_page(NULL, vaddr);
+#define arch_kmap_local_post_unmap(vaddr)	\
+	local_flush_tlb_page(NULL, vaddr);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */

linux-7.2.3/arch/microblaze/include/asm/io.h

@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_IO_H
+#define _ASM_MICROBLAZE_IO_H
+
+#include <asm/byteorder.h>
+#include <asm/page.h>
+#include <linux/types.h>
+#include <linux/mm.h>          /* Get struct page {...} */
+
+#ifndef CONFIG_PCI
+#define _IO_BASE	0
+#define _ISA_MEM_BASE	0
+#else
+#define _IO_BASE	isa_io_base
+#define _ISA_MEM_BASE	isa_mem_base
+struct pci_dev;
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+#define pci_iounmap pci_iounmap
+
+extern unsigned long isa_io_base;
+extern resource_size_t isa_mem_base;
+#endif
+
+#define PCI_IOBASE	((void __iomem *)_IO_BASE)
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+extern void iounmap(volatile void __iomem *addr);
+
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+
+/* Big Endian */
+#define out_be32(a, v) __raw_writel((v), (void __iomem __force *)(a))
+#define out_be16(a, v) __raw_writew((v), (a))
+
+#define in_be32(a) __raw_readl((const void __iomem __force *)(a))
+#define in_be16(a) __raw_readw(a)
+
+#define writel_be(v, a)	out_be32((__force unsigned *)a, v)
+#define readl_be(a)	in_be32((__force unsigned *)a)
+
+/* Little endian */
+#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a))
+#define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
+
+#define in_le32(a) __le32_to_cpu(__raw_readl(a))
+#define in_le16(a) __le16_to_cpu(__raw_readw(a))
+
+/* Byte ops */
+#define out_8(a, v) __raw_writeb((v), (a))
+#define in_8(a) __raw_readb(a)
+
+#include <asm-generic/io.h>
+
+#endif /* _ASM_MICROBLAZE_IO_H */

linux-7.2.3/arch/microblaze/include/asm/irq.h

@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_IRQ_H
+#define _ASM_MICROBLAZE_IRQ_H
+
+#include <asm-generic/irq.h>
+
+struct pt_regs;
+extern void do_IRQ(struct pt_regs *regs);
+
+#endif /* _ASM_MICROBLAZE_IRQ_H */

linux-7.2.3/arch/microblaze/include/asm/irqflags.h

@@ -0,0 +1,119 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_IRQFLAGS_H
+#define _ASM_MICROBLAZE_IRQFLAGS_H
+
+#include <linux/types.h>
+#include <asm/registers.h>
+
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+
+static inline notrace unsigned long arch_local_irq_save(void)
+{
+	unsigned long flags;
+	asm volatile("	msrclr %0, %1	\n"
+		     "	nop		\n"
+		     : "=r"(flags)
+		     : "i"(MSR_IE)
+		     : "memory");
+	return flags;
+}
+
+static inline notrace void arch_local_irq_disable(void)
+{
+	/* this uses r0 without declaring it - is that correct? */
+	asm volatile("	msrclr r0, %0	\n"
+		     "	nop		\n"
+		     :
+		     : "i"(MSR_IE)
+		     : "memory");
+}
+
+static inline notrace void arch_local_irq_enable(void)
+{
+	/* this uses r0 without declaring it - is that correct? */
+	asm volatile("	msrset	r0, %0	\n"
+		     "	nop		\n"
+		     :
+		     : "i"(MSR_IE)
+		     : "memory");
+}
+
+#else /* !CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
+
+static inline notrace unsigned long arch_local_irq_save(void)
+{
+	unsigned long flags, tmp;
+	asm volatile ("	mfs	%0, rmsr	\n"
+		      "	nop			\n"
+		      "	andi	%1, %0, %2	\n"
+		      "	mts	rmsr, %1	\n"
+		      "	nop			\n"
+		      : "=r"(flags), "=r"(tmp)
+		      : "i"(~MSR_IE)
+		      : "memory");
+	return flags;
+}
+
+static inline notrace void arch_local_irq_disable(void)
+{
+	unsigned long tmp;
+	asm volatile("	mfs	%0, rmsr	\n"
+		     "	nop			\n"
+		     "	andi	%0, %0, %1	\n"
+		     "	mts	rmsr, %0	\n"
+		     "	nop			\n"
+		     : "=r"(tmp)
+		     : "i"(~MSR_IE)
+		     : "memory");
+}
+
+static inline notrace void arch_local_irq_enable(void)
+{
+	unsigned long tmp;
+	asm volatile("	mfs	%0, rmsr	\n"
+		     "	nop			\n"
+		     "	ori	%0, %0, %1	\n"
+		     "	mts	rmsr, %0	\n"
+		     "	nop			\n"
+		     : "=r"(tmp)
+		     : "i"(MSR_IE)
+		     : "memory");
+}
+
+#endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
+
+static inline notrace unsigned long arch_local_save_flags(void)
+{
+	unsigned long flags;
+	asm volatile("	mfs	%0, rmsr	\n"
+		     "	nop			\n"
+		     : "=r"(flags)
+		     :
+		     : "memory");
+	return flags;
+}
+
+static inline notrace void arch_local_irq_restore(unsigned long flags)
+{
+	asm volatile("	mts	rmsr, %0	\n"
+		     "	nop			\n"
+		     :
+		     : "r"(flags)
+		     : "memory");
+}
+
+static inline notrace bool arch_irqs_disabled_flags(unsigned long flags)
+{
+	return (flags & MSR_IE) == 0;
+}
+
+static inline notrace bool arch_irqs_disabled(void)
+{
+	return arch_irqs_disabled_flags(arch_local_save_flags());
+}
+
+#endif /* _ASM_MICROBLAZE_IRQFLAGS_H */

linux-7.2.3/arch/microblaze/include/asm/kgdb.h

@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifdef __KERNEL__
+#ifndef __MICROBLAZE_KGDB_H__
+#define __MICROBLAZE_KGDB_H__
+
+#ifndef __ASSEMBLER__
+
+#define CACHE_FLUSH_IS_SAFE	1
+#define BUFMAX			2048
+
+/*
+ * 32 32-bit general purpose registers (r0-r31)
+ *  6 32-bit special registers (pc, msr, ear, esr, fsr, btr)
+ * 12 32-bit PVR
+ *   7 32-bit MMU Regs (redr, rpid, rzpr, rtlbx, rtlbsx, rtlblo, rtlbhi)
+ * ------
+ *  57 registers
+ */
+#define NUMREGBYTES	(57 * 4)
+
+#define BREAK_INSTR_SIZE	4
+static inline void arch_kgdb_breakpoint(void)
+{
+	__asm__ __volatile__("brki r16, 0x18;");
+}
+
+struct pt_regs;
+asmlinkage void microblaze_kgdb_break(struct pt_regs *regs);
+
+#endif /* __ASSEMBLER__ */
+#endif /* __MICROBLAZE_KGDB_H__ */
+#endif /* __KERNEL__ */

linux-7.2.3/arch/microblaze/include/asm/mmu.h

@@ -0,0 +1,119 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_H
+#define _ASM_MICROBLAZE_MMU_H
+
+#  ifdef __KERNEL__
+#   ifndef __ASSEMBLER__
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+/* Hardware Page Table Entry */
+typedef struct _PTE {
+	unsigned long    v:1;	/* Entry is valid */
+	unsigned long vsid:24;	/* Virtual segment identifier */
+	unsigned long    h:1;	/* Hash algorithm indicator */
+	unsigned long  api:6;	/* Abbreviated page index */
+	unsigned long  rpn:20;	/* Real (physical) page number */
+	unsigned long     :3;	/* Unused */
+	unsigned long    r:1;	/* Referenced */
+	unsigned long    c:1;	/* Changed */
+	unsigned long    w:1;	/* Write-thru cache mode */
+	unsigned long    i:1;	/* Cache inhibited */
+	unsigned long    m:1;	/* Memory coherence */
+	unsigned long    g:1;	/* Guarded */
+	unsigned long     :1;	/* Unused */
+	unsigned long   pp:2;	/* Page protection */
+} PTE;
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+#  define PP_RWXX	0 /* Supervisor read/write, User none */
+#  define PP_RWRX	1 /* Supervisor read/write, User read */
+#  define PP_RWRW	2 /* Supervisor read/write, User read/write */
+#  define PP_RXRX	3 /* Supervisor read,       User read */
+
+/* Segment Register */
+typedef struct _SEGREG {
+	unsigned long    t:1;	/* Normal or I/O  type */
+	unsigned long   ks:1;	/* Supervisor 'key' (normally 0) */
+	unsigned long   kp:1;	/* User 'key' (normally 1) */
+	unsigned long    n:1;	/* No-execute */
+	unsigned long     :4;	/* Unused */
+	unsigned long vsid:24;	/* Virtual Segment Identifier */
+} SEGREG;
+
+extern void _tlbie(unsigned long va);	/* invalidate a TLB entry */
+extern void _tlbia(void);		/* invalidate all TLB entries */
+
+/*
+ * tlb_skip size stores actual number skipped TLBs from TLB0 - every directy TLB
+ * mapping has to increase tlb_skip size.
+ */
+extern u32 tlb_skip;
+#   endif /* __ASSEMBLER__ */
+
+/*
+ * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
+ * instruction and data sides share a unified, 64-entry, semi-associative
+ * TLB which is maintained totally under software control. In addition, the
+ * instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
+ * TLB which serves as a first level to the shared TLB. These two TLBs are
+ * known as the UTLB and ITLB, respectively.
+ */
+
+#  define MICROBLAZE_TLB_SIZE 64
+
+/* For cases when you want to skip some TLB entries */
+#  define MICROBLAZE_TLB_SKIP 0
+
+/* Use the last TLB for temporary access to LMB */
+#  define MICROBLAZE_LMB_TLB_ID 63
+
+/*
+ * TLB entries are defined by a "high" tag portion and a "low" data
+ * portion. The data portion is 32-bits.
+ *
+ * TLB entries are managed entirely under software control by reading,
+ * writing, and searching using the MTS and MFS instructions.
+ */
+
+#  define TLB_LO		1
+#  define TLB_HI		0
+#  define TLB_DATA		TLB_LO
+#  define TLB_TAG		TLB_HI
+
+/* Tag portion */
+#  define TLB_EPN_MASK		0xFFFFFC00 /* Effective Page Number */
+#  define TLB_PAGESZ_MASK	0x00000380
+#  define TLB_PAGESZ(x)		(((x) & 0x7) << 7)
+#  define PAGESZ_1K		0
+#  define PAGESZ_4K		1
+#  define PAGESZ_16K		2
+#  define PAGESZ_64K		3
+#  define PAGESZ_256K		4
+#  define PAGESZ_1M		5
+#  define PAGESZ_4M		6
+#  define PAGESZ_16M		7
+#  define TLB_VALID		0x00000040 /* Entry is valid */
+
+/* Data portion */
+#  define TLB_RPN_MASK		0xFFFFFC00 /* Real Page Number */
+#  define TLB_PERM_MASK		0x00000300
+#  define TLB_EX		0x00000200 /* Instruction execution allowed */
+#  define TLB_WR		0x00000100 /* Writes permitted */
+#  define TLB_ZSEL_MASK		0x000000F0
+#  define TLB_ZSEL(x)		(((x) & 0xF) << 4)
+#  define TLB_ATTR_MASK		0x0000000F
+#  define TLB_W			0x00000008 /* Caching is write-through */
+#  define TLB_I			0x00000004 /* Caching is inhibited */
+#  define TLB_M			0x00000002 /* Memory is coherent */
+#  define TLB_G			0x00000001 /* Memory is guarded from prefetch */
+
+#  endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_MMU_H */

linux-7.2.3/arch/microblaze/include/asm/mmu_context.h

@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+# include <asm/mmu_context_mm.h>

linux-7.2.3/arch/microblaze/include/asm/mmu_context_mm.h

@@ -0,0 +1,140 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
+#define _ASM_MICROBLAZE_MMU_CONTEXT_H
+
+#include <linux/atomic.h>
+#include <linux/mm_types.h>
+#include <linux/sched.h>
+
+#include <asm/bitops.h>
+#include <asm/mmu.h>
+#include <asm-generic/mm_hooks.h>
+
+# ifdef __KERNEL__
+/*
+ * This function defines the mapping from contexts to VSIDs (virtual
+ * segment IDs).  We use a skew on both the context and the high 4 bits
+ * of the 32-bit virtual address (the "effective segment ID") in order
+ * to spread out the entries in the MMU hash table.
+ */
+# define CTX_TO_VSID(ctx, va)	(((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
+				 & 0xffffff)
+
+/*
+   MicroBlaze has 256 contexts, so we can just rotate through these
+   as a way of "switching" contexts.  If the TID of the TLB is zero,
+   the PID/TID comparison is disabled, so we can use a TID of zero
+   to represent all kernel pages as shared among all contexts.
+ */
+
+# define NO_CONTEXT	256
+# define LAST_CONTEXT	255
+# define FIRST_CONTEXT	1
+
+/*
+ * Set the current MMU context.
+ * This is done byloading up the segment registers for the user part of the
+ * address space.
+ *
+ * Since the PGD is immediately available, it is much faster to simply
+ * pass this along as a second parameter, which is required for 8xx and
+ * can be used for debugging on all processors (if you happen to have
+ * an Abatron).
+ */
+extern void set_context(mm_context_t context, pgd_t *pgd);
+
+/*
+ * Bitmap of contexts in use.
+ * The size of this bitmap is LAST_CONTEXT + 1 bits.
+ */
+extern unsigned long context_map[];
+
+/*
+ * This caches the next context number that we expect to be free.
+ * Its use is an optimization only, we can't rely on this context
+ * number to be free, but it usually will be.
+ */
+extern mm_context_t next_mmu_context;
+
+/*
+ * Since we don't have sufficient contexts to give one to every task
+ * that could be in the system, we need to be able to steal contexts.
+ * These variables support that.
+ */
+extern atomic_t nr_free_contexts;
+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern void steal_context(void);
+
+/*
+ * Get a new mmu context for the address space described by `mm'.
+ */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+	mm_context_t ctx;
+
+	if (mm->context != NO_CONTEXT)
+		return;
+	while (atomic_dec_if_positive(&nr_free_contexts) < 0)
+		steal_context();
+	ctx = next_mmu_context;
+	while (test_and_set_bit(ctx, context_map)) {
+		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+		if (ctx > LAST_CONTEXT)
+			ctx = 0;
+	}
+	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+	mm->context = ctx;
+	context_mm[ctx] = mm;
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+# define init_new_context(tsk, mm)	(((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * We're finished using the context for an address space.
+ */
+#define destroy_context destroy_context
+static inline void destroy_context(struct mm_struct *mm)
+{
+	if (mm->context != NO_CONTEXT) {
+		clear_bit(mm->context, context_map);
+		mm->context = NO_CONTEXT;
+		atomic_inc(&nr_free_contexts);
+	}
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	tsk->thread.pgdir = next->pgd;
+	get_mmu_context(next);
+	set_context(next->context, next->pgd);
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+#define activate_mm activate_mm
+static inline void activate_mm(struct mm_struct *active_mm,
+			struct mm_struct *mm)
+{
+	current->thread.pgdir = mm->pgd;
+	get_mmu_context(mm);
+	set_context(mm->context, mm->pgd);
+}
+
+extern void mmu_context_init(void);
+
+#include <asm-generic/mmu_context.h>
+
+# endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */

linux-7.2.3/arch/microblaze/include/asm/module.h

@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_MODULE_H
+#define _ASM_MICROBLAZE_MODULE_H
+
+#include <asm-generic/module.h>
+
+/* Microblaze Relocations */
+#define R_MICROBLAZE_NONE 0
+#define R_MICROBLAZE_32 1
+#define R_MICROBLAZE_32_PCREL 2
+#define R_MICROBLAZE_64_PCREL 3
+#define R_MICROBLAZE_32_PCREL_LO 4
+#define R_MICROBLAZE_64 5
+#define R_MICROBLAZE_32_LO 6
+#define R_MICROBLAZE_SRO32 7
+#define R_MICROBLAZE_SRW32 8
+#define R_MICROBLAZE_64_NONE 9
+#define R_MICROBLAZE_32_SYM_OP_SYM 10
+/* Keep this the last entry. */
+#define R_MICROBLAZE_NUM 11
+
+typedef struct { volatile int counter; } module_t;
+
+#endif /* _ASM_MICROBLAZE_MODULE_H */

linux-7.2.3/arch/microblaze/include/asm/page.h

@@ -0,0 +1,141 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * VM ops
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ * Changes for MMU support:
+ *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ */
+
+#ifndef _ASM_MICROBLAZE_PAGE_H
+#define _ASM_MICROBLAZE_PAGE_H
+
+#include <linux/pfn.h>
+#include <asm/setup.h>
+#include <asm/asm-compat.h>
+#include <linux/const.h>
+
+#ifdef __KERNEL__
+
+#include <vdso/page.h>
+
+#define LOAD_OFFSET	ASM_CONST((CONFIG_KERNEL_START-CONFIG_KERNEL_BASE_ADDR))
+
+#define PTE_SHIFT	(PAGE_SHIFT - 2)	/* 1024 ptes per page */
+
+#ifndef __ASSEMBLER__
+
+/*
+ * PAGE_OFFSET -- the first address of the first page of memory. With MMU
+ * it is set to the kernel start address (aligned on a page boundary).
+ *
+ * CONFIG_KERNEL_START is defined in arch/microblaze/config.in and used
+ * in arch/microblaze/Makefile.
+ */
+#define PAGE_OFFSET	CONFIG_KERNEL_START
+
+/*
+ * The basic type of a PTE - 32 bit physical addressing.
+ */
+typedef unsigned long pte_basic_t;
+#define PTE_FMT		"%.8lx"
+
+# define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
+# define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
+
+# define copy_user_page(vto, vfrom, vaddr, topg) \
+			memcpy((vto), (vfrom), PAGE_SIZE)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct page *pgtable_t;
+typedef struct { unsigned long	pte; }		pte_t;
+typedef struct { unsigned long	pgprot; }	pgprot_t;
+/* FIXME this can depend on linux kernel version */
+typedef struct { unsigned long pgd; } pgd_t;
+
+# define pte_val(x)	((x).pte)
+# define pgprot_val(x)	((x).pgprot)
+
+#   define pgd_val(x)      ((x).pgd)
+
+# define __pte(x)	((pte_t) { (x) })
+# define __pgd(x)	((pgd_t) { (x) })
+# define __pgprot(x)	((pgprot_t) { (x) })
+
+/**
+ * Conversions for virtual address, physical address, pfn, and struct
+ * page are defined in the following files.
+ *
+ * virt -+
+ *	 | asm-microblaze/page.h
+ * phys -+
+ *	 | linux/pfn.h
+ *  pfn -+
+ *	 | asm-generic/memory_model.h
+ * page -+
+ *
+ */
+
+extern unsigned long max_low_pfn;
+extern unsigned long min_low_pfn;
+extern unsigned long max_pfn;
+
+extern unsigned long memory_start;
+extern unsigned long memory_size;
+extern unsigned long lowmem_size;
+
+extern unsigned long kernel_tlb;
+
+extern int page_is_ram(unsigned long pfn);
+
+# define phys_to_pfn(phys)	(PFN_DOWN(phys))
+# define pfn_to_phys(pfn)	(PFN_PHYS(pfn))
+
+#  define virt_to_page(kaddr)	(pfn_to_page(__pa(kaddr) >> PAGE_SHIFT))
+#  define page_to_virt(page)   __va(page_to_pfn(page) << PAGE_SHIFT)
+
+#  define ARCH_PFN_OFFSET	(memory_start >> PAGE_SHIFT)
+# endif /* __ASSEMBLER__ */
+
+/* Convert between virtual and physical address for MMU. */
+/* Handle MicroBlaze processor with virtual memory. */
+#define __virt_to_phys(addr) \
+	((addr) + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
+#define __phys_to_virt(addr) \
+	((addr) + CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
+#define tophys(rd, rs) \
+	addik rd, rs, (CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
+#define tovirt(rd, rs) \
+	addik rd, rs, (CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
+
+#ifndef __ASSEMBLER__
+
+# define __pa(x)	__virt_to_phys((unsigned long)(x))
+# define __va(x)	((void *)__phys_to_virt((unsigned long)(x)))
+
+static inline unsigned long virt_to_pfn(const void *vaddr)
+{
+	return phys_to_pfn(__pa(vaddr));
+}
+
+static inline const void *pfn_to_virt(unsigned long pfn)
+{
+	return __va(pfn_to_phys((pfn)));
+}
+
+#define	virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
+
+#endif /* __ASSEMBLER__ */
+
+#define TOPHYS(addr)  __virt_to_phys(addr)
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
+#endif /* _ASM_MICROBLAZE_PAGE_H */

linux-7.2.3/arch/microblaze/include/asm/pci-bridge.h

@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef _ASM_MICROBLAZE_PCI_BRIDGE_H
+#define _ASM_MICROBLAZE_PCI_BRIDGE_H
+#ifdef __KERNEL__
+/*
+ */
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+
+struct device_node;
+
+#ifdef CONFIG_PCI
+extern struct list_head hose_list;
+extern int pcibios_vaddr_is_ioport(void __iomem *address);
+#else
+static inline int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+	return 0;
+}
+#endif
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	struct pci_bus *bus;
+	struct list_head list_node;
+
+	void __iomem *io_base_virt;
+
+	/* Currently, we limit ourselves to 1 IO range and 3 mem
+	 * ranges since the common pci_bus structure can't handle more
+	 */
+	struct resource io_resource;
+};
+
+#ifdef CONFIG_PCI
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+	/* No specific ISA handling on ppc32 at this stage, it
+	 * all goes through PCI
+	 */
+	return 0;
+}
+#endif /* CONFIG_PCI */
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_MICROBLAZE_PCI_BRIDGE_H */

linux-7.2.3/arch/microblaze/include/asm/pci.h

@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *
+ * Based on powerpc version
+ */
+
+#ifndef __ASM_MICROBLAZE_PCI_H
+#define __ASM_MICROBLAZE_PCI_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+/*
+ * Set this to 1 if you want the kernel to re-assign all PCI
+ * bus numbers (don't do that on ppc64 yet !)
+ */
+#define pcibios_assign_all_busses()	0
+
+extern int pci_domain_nr(struct pci_bus *bus);
+
+/* Decide whether to display the domain number in /proc */
+extern int pci_proc_domain(struct pci_bus *bus);
+
+/* Tell PCI code what kind of PCI resource mappings we support */
+#define HAVE_PCI_MMAP			1
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE	1
+
+struct file;
+
+static inline void __init xilinx_pci_init(void) { return; }
+
+#endif	/* __KERNEL__ */
+#endif /* __ASM_MICROBLAZE_PCI_H */

linux-7.2.3/arch/microblaze/include/asm/pgalloc.h

@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_PGALLOC_H
+#define _ASM_MICROBLAZE_PGALLOC_H
+
+#include <linux/kernel.h>	/* For min/max macros */
+#include <linux/highmem.h>
+#include <linux/pgtable.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+#define __HAVE_ARCH_PTE_ALLOC_ONE_KERNEL
+#include <asm-generic/pgalloc.h>
+
+extern void __bad_pte(pmd_t *pmd);
+
+#define pgd_alloc(mm)		__pgd_alloc(mm, 0)
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm);
+
+#define __pte_free_tlb(tlb, pte, addr)	pte_free((tlb)->mm, (pte))
+
+#define pmd_populate(mm, pmd, pte) \
+			(pmd_val(*(pmd)) = (unsigned long)page_address(pte))
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+		(pmd_val(*(pmd)) = (unsigned long) (pte))
+
+#endif /* _ASM_MICROBLAZE_PGALLOC_H */

linux-7.2.3/arch/microblaze/include/asm/pgtable.h

@@ -0,0 +1,437 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_PGTABLE_H
+#define _ASM_MICROBLAZE_PGTABLE_H
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLER__
+extern int mem_init_done;
+#endif
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLER__
+
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h>		/* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+extern unsigned long va_to_phys(unsigned long address);
+extern pte_t *va_to_pte(unsigned long address);
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+
+/* Start and end of the vmalloc area. */
+/* Make sure to map the vmalloc area above the pinned kernel memory area
+   of 32Mb.  */
+#define VMALLOC_START	(CONFIG_KERNEL_START + CONFIG_LOWMEM_SIZE)
+#define VMALLOC_END	ioremap_bot
+
+#endif /* __ASSEMBLER__ */
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+
+#define _PAGE_CACHE_CTL	(_PAGE_GUARDED | _PAGE_NO_CACHE | \
+							_PAGE_WRITETHRU)
+
+#define pgprot_noncached(prot) \
+			(__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+					_PAGE_NO_CACHE | _PAGE_GUARDED))
+
+#define pgprot_noncached_wc(prot) \
+			 (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+							_PAGE_NO_CACHE))
+
+/*
+ * The MicroBlaze MMU is identical to the PPC-40x MMU, and uses a hash
+ * table containing PTEs, together with a set of 16 segment registers, to
+ * define the virtual to physical address mapping.
+ *
+ * We use the hash table as an extended TLB, i.e. a cache of currently
+ * active mappings.  We maintain a two-level page table tree, much
+ * like that used by the i386, for the sake of the Linux memory
+ * management code.  Low-level assembler code in hashtable.S
+ * (procedure hash_page) is responsible for extracting ptes from the
+ * tree and putting them into the hash table when necessary, and
+ * updating the accessed and modified bits in the page table tree.
+ */
+
+/*
+ * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
+ * instruction and data sides share a unified, 64-entry, semi-associative
+ * TLB which is maintained totally under software control. In addition, the
+ * instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
+ * TLB which serves as a first level to the shared TLB. These two TLBs are
+ * known as the UTLB and ITLB, respectively (see "mmu.h" for definitions).
+ */
+
+/*
+ * The normal case is that PTEs are 32-bits and we have a 1-page
+ * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages.  -- paulus
+ *
+ */
+
+/* PGDIR_SHIFT determines what a top-level page table entry can map */
+#define PGDIR_SHIFT	(PAGE_SHIFT + PTE_SHIFT)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: our page-table tree is two-level, so
+ * we don't really have any PMD directory.
+ */
+#define PTRS_PER_PTE	(1 << PTE_SHIFT)
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PGD	(1 << (32 - PGDIR_SHIFT))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
+
+#define pte_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pte "PTE_FMT".\n", \
+		__FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+		__FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Bits in a linux-style PTE.  These match the bits in the
+ * (hardware-defined) PTE as closely as possible.
+ */
+
+/* There are several potential gotchas here.  The hardware TLBLO
+ * field looks like this:
+ *
+ * 0  1  2  3  4  ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * RPN.....................  0  0 EX WR ZSEL.......  W  I  M  G
+ *
+ * Where possible we make the Linux PTE bits match up with this
+ *
+ * - bits 20 and 21 must be cleared, because we use 4k pages (4xx can
+ * support down to 1k pages), this is done in the TLBMiss exception
+ * handler.
+ * - We use only zones 0 (for kernel pages) and 1 (for user pages)
+ * of the 16 available.  Bit 24-26 of the TLB are cleared in the TLB
+ * miss handler.  Bit 27 is PAGE_USER, thus selecting the correct
+ * zone.
+ * - PRESENT *must* be in the bottom two bits because swap PTEs use the top
+ * 30 bits.  Because 4xx doesn't support SMP anyway, M is irrelevant so we
+ * borrow it for PAGE_PRESENT.  Bit 30 is cleared in the TLB miss handler
+ * before the TLB entry is loaded.
+ * - All other bits of the PTE are loaded into TLBLO without
+ *  * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
+ * software PTE bits.  We actually use bits 21, 24, 25, and
+ * 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
+ * PRESENT.
+ */
+
+/* Definitions for MicroBlaze. */
+#define	_PAGE_GUARDED	0x001	/* G: page is guarded from prefetch */
+#define _PAGE_PRESENT	0x002	/* software: PTE contains a translation */
+#define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
+#define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
+#define	_PAGE_USER	0x010	/* matches one of the zone permission bits */
+#define	_PAGE_RW	0x040	/* software: Writes permitted */
+#define	_PAGE_DIRTY	0x080	/* software: dirty page */
+#define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
+#define _PAGE_HWEXEC	0x200	/* hardware: EX permission */
+#define _PAGE_ACCESSED	0x400	/* software: R: page referenced */
+#define _PMD_PRESENT	PAGE_MASK
+
+/* We borrow bit 24 to store the exclusive marker in swap PTEs. */
+#define _PAGE_SWP_EXCLUSIVE	_PAGE_DIRTY
+
+/*
+ * Some bits are unused...
+ */
+#ifndef _PAGE_HASHPTE
+#define _PAGE_HASHPTE	0
+#endif
+#ifndef _PTE_NONE_MASK
+#define _PTE_NONE_MASK	0
+#endif
+#ifndef _PAGE_SHARED
+#define _PAGE_SHARED	0
+#endif
+#ifndef _PAGE_EXEC
+#define _PAGE_EXEC	0
+#endif
+
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+/*
+ * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
+ * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
+ * to have it in the Linux PTE, and in fact the bit could be reused for
+ * another purpose.  -- paulus.
+ */
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED)
+#define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
+
+#define _PAGE_KERNEL \
+	(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_SHARED | _PAGE_HWEXEC)
+
+#define _PAGE_IO	(_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
+
+#define PAGE_NONE	__pgprot(_PAGE_BASE)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X \
+		__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define PAGE_KERNEL	__pgprot(_PAGE_KERNEL)
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_BASE | _PAGE_SHARED)
+#define PAGE_KERNEL_CI	__pgprot(_PAGE_IO)
+
+/*
+ * We consider execute permission the same as read.
+ * Also, write permissions imply read permissions.
+ */
+
+#define pte_none(pte)		((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+#define pte_clear(mm, addr, ptep) \
+	do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_bad(pmd)		((pmd_val(pmd) & _PMD_PRESENT) == 0)
+#define	pmd_present(pmd)	((pmd_val(pmd) & _PMD_PRESENT) != 0)
+#define	pmd_clear(pmdp)		do { pmd_val(*(pmdp)) = 0; } while (0)
+
+#define pte_page(x)		(mem_map + (unsigned long) \
+				((pte_val(x) - memory_start) >> PAGE_SHIFT))
+#define PFN_PTE_SHIFT		PAGE_SHIFT
+
+#define pte_pfn(x)		(pte_val(x) >> PFN_PTE_SHIFT)
+
+#define pfn_pte(pfn, prot) \
+	__pte(((pte_basic_t)(pfn) << PFN_PTE_SHIFT) | pgprot_val(prot))
+
+#ifndef __ASSEMBLER__
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte)  { return pte_val(pte) & _PAGE_USER; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
+static inline int pte_exec(pte_t pte)  { return pte_val(pte) & _PAGE_EXEC; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+
+static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_rdprotect(pte_t pte) \
+		{ pte_val(pte) &= ~_PAGE_USER; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte) \
+	{ pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_exprotect(pte_t pte) \
+	{ pte_val(pte) &= ~_PAGE_EXEC; return pte; }
+static inline pte_t pte_mkclean(pte_t pte) \
+	{ pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkold(pte_t pte) \
+	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_USER; return pte; }
+static inline pte_t pte_mkexec(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_USER | _PAGE_EXEC; return pte; }
+static inline pte_t pte_mkwrite_novma(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) \
+	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+static inline pte_t mk_pte_phys(phys_addr_t physpage, pgprot_t pgprot)
+{
+	pte_t pte;
+	pte_val(pte) = physpage | pgprot_val(pgprot);
+	return pte;
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+	return pte;
+}
+
+/*
+ * Atomic PTE updates.
+ *
+ * pte_update clears and sets bit atomically, and returns
+ * the old pte value.
+ * The ((unsigned long)(p+1) - 4) hack is to get to the least-significant
+ * 32 bits of the PTE regardless of whether PTEs are 32 or 64 bits.
+ */
+static inline unsigned long pte_update(pte_t *p, unsigned long clr,
+				unsigned long set)
+{
+	unsigned long flags, old, tmp;
+
+	raw_local_irq_save(flags);
+
+	__asm__ __volatile__(	"lw	%0, %2, r0	\n"
+				"andn	%1, %0, %3	\n"
+				"or	%1, %1, %4	\n"
+				"sw	%1, %2, r0	\n"
+			: "=&r" (old), "=&r" (tmp)
+			: "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set)
+			: "cc");
+
+	raw_local_irq_restore(flags);
+
+	return old;
+}
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ */
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+	*ptep = pte;
+}
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+struct vm_area_struct;
+static inline bool ptep_test_and_clear_young(struct vm_area_struct *vma,
+		unsigned long address, pte_t *ptep)
+{
+	return (pte_update(ptep, _PAGE_ACCESSED, 0) & _PAGE_ACCESSED) != 0;
+}
+
+static inline int ptep_test_and_clear_dirty(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	return (pte_update(ptep, \
+		(_PAGE_DIRTY | _PAGE_HWWRITE), 0) & _PAGE_DIRTY) != 0;
+}
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
+}
+
+/*static inline void ptep_set_wrprotect(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
+}*/
+
+static inline void ptep_mkdirty(struct mm_struct *mm,
+		unsigned long addr, pte_t *ptep)
+{
+	pte_update(ptep, 0, _PAGE_DIRTY);
+}
+
+/*#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)*/
+
+/* Convert pmd entry to page */
+/* our pmd entry is an effective address of pte table*/
+/* returns effective address of the pmd entry*/
+static inline unsigned long pmd_page_vaddr(pmd_t pmd)
+{
+	return ((unsigned long) (pmd_val(pmd) & PAGE_MASK));
+}
+
+/* returns pfn of the pmd entry*/
+#define pmd_pfn(pmd)	(__pa(pmd_val(pmd)) >> PAGE_SHIFT)
+
+/* returns struct *page of the pmd entry*/
+#define pmd_page(pmd)	(pfn_to_page(__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+
+/* Find an entry in the third-level page table.. */
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/*
+ * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
+ * are !pte_none() && !pte_present().
+ *
+ *                         1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3
+ *   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ *   <------------------ offset -------------------> E < type -> 0 0
+ *
+ *   E is the exclusive marker that is not stored in swap entries.
+ */
+#define __swp_type(entry)	((entry).val & 0x1f)
+#define __swp_offset(entry)	((entry).val >> 6)
+#define __swp_entry(type, offset) \
+		((swp_entry_t) { ((type) & 0x1f) | ((offset) << 6) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) >> 2 })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val << 2 })
+
+static inline bool pte_swp_exclusive(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
+}
+
+static inline pte_t pte_swp_mkexclusive(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_SWP_EXCLUSIVE;
+	return pte;
+}
+
+static inline pte_t pte_swp_clear_exclusive(pte_t pte)
+{
+	pte_val(pte) &= ~_PAGE_SWP_EXCLUSIVE;
+	return pte;
+}
+
+extern unsigned long iopa(unsigned long addr);
+
+/* Values for nocacheflag and cmode */
+/* These are not used by the APUS kernel_map, but prevents
+ * compilation errors.
+ */
+#define	IOMAP_FULL_CACHING	0
+#define	IOMAP_NOCACHE_SER	1
+#define	IOMAP_NOCACHE_NONSER	2
+#define	IOMAP_NO_COPYBACK	3
+
+void do_page_fault(struct pt_regs *regs, unsigned long address,
+		   unsigned long error_code);
+
+void mapin_ram(void);
+int map_page(unsigned long va, phys_addr_t pa, int flags);
+
+extern int mem_init_done;
+
+asmlinkage void __init mmu_init(void);
+
+#endif /* __ASSEMBLER__ */
+#endif /* __KERNEL__ */
+
+#ifndef __ASSEMBLER__
+extern unsigned long ioremap_bot, ioremap_base;
+
+void setup_memory(void);
+#endif /* __ASSEMBLER__ */
+
+#endif /* _ASM_MICROBLAZE_PGTABLE_H */

linux-7.2.3/arch/microblaze/include/asm/processor.h

@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_PROCESSOR_H
+#define _ASM_MICROBLAZE_PROCESSOR_H
+
+#include <asm/ptrace.h>
+#include <asm/setup.h>
+#include <asm/registers.h>
+#include <asm/entry.h>
+#include <asm/current.h>
+
+# ifndef __ASSEMBLER__
+/* from kernel/cpu/mb.c */
+extern const struct seq_operations cpuinfo_op;
+
+# define cpu_relax()		barrier()
+
+#define task_pt_regs(tsk) \
+		(((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
+
+/* Do necessary setup to start up a newly executed thread. */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp);
+
+extern void ret_from_fork(void);
+extern void ret_from_kernel_thread(void);
+
+# endif /* __ASSEMBLER__ */
+
+/*
+ * This is used to define STACK_TOP, and with MMU it must be below
+ * kernel base to select the correct PGD when handling MMU exceptions.
+ */
+# define TASK_SIZE	(CONFIG_KERNEL_START)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+# define TASK_UNMAPPED_BASE	(TASK_SIZE / 8 * 3)
+
+# define THREAD_KSP	0
+
+#  ifndef __ASSEMBLER__
+
+/* If you change this, you must change the associated assembly-languages
+ * constants defined below, THREAD_*.
+ */
+struct thread_struct {
+	/* kernel stack pointer (must be first field in structure) */
+	unsigned long	ksp;
+	unsigned long	ksp_limit;	/* if ksp <= ksp_limit stack overflow */
+	void		*pgdir;		/* root of page-table tree */
+	struct pt_regs	*regs;		/* Pointer to saved register state */
+};
+
+#  define INIT_THREAD { \
+	.ksp   = sizeof init_stack + (unsigned long)init_stack, \
+	.pgdir = swapper_pg_dir, \
+}
+
+unsigned long __get_wchan(struct task_struct *p);
+
+/* The size allocated for kernel stacks. This _must_ be a power of two! */
+# define KERNEL_STACK_SIZE	0x2000
+
+/* Return some info about the user process TASK.  */
+#  define task_tos(task)	((unsigned long)(task) + KERNEL_STACK_SIZE)
+#  define task_regs(task) ((struct pt_regs *)task_tos(task) - 1)
+
+#  define task_pt_regs_plus_args(tsk) \
+	((void *)task_pt_regs(tsk))
+
+#  define task_sp(task)	(task_regs(task)->r1)
+#  define task_pc(task)	(task_regs(task)->pc)
+/* Grotty old names for some.  */
+#  define KSTK_EIP(task)	(task_pc(task))
+#  define KSTK_ESP(task)	(task_sp(task))
+
+#  define STACK_TOP	TASK_SIZE
+#  define STACK_TOP_MAX	STACK_TOP
+
+#ifdef CONFIG_DEBUG_FS
+extern struct dentry *of_debugfs_root;
+#endif
+
+#  endif /* __ASSEMBLER__ */
+#endif /* _ASM_MICROBLAZE_PROCESSOR_H */

linux-7.2.3/arch/microblaze/include/asm/ptrace.h

@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+#ifndef _ASM_MICROBLAZE_PTRACE_H
+#define _ASM_MICROBLAZE_PTRACE_H
+
+#include <uapi/asm/ptrace.h>
+
+#ifndef __ASSEMBLER__
+#define kernel_mode(regs)		((regs)->pt_mode)
+#define user_mode(regs)			(!kernel_mode(regs))
+
+#define instruction_pointer(regs)	((regs)->pc)
+#define profile_pc(regs)		instruction_pointer(regs)
+#define user_stack_pointer(regs)	((regs)->r1)
+
+static inline long regs_return_value(struct pt_regs *regs)
+{
+	return regs->r3;
+}
+
+#endif /* __ASSEMBLER__ */
+#endif /* _ASM_MICROBLAZE_PTRACE_H */

linux-7.2.3/arch/microblaze/include/asm/pvr.h

@@ -0,0 +1,224 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Support for the MicroBlaze PVR (Processor Version Register)
+ *
+ * Copyright (C) 2009 - 2011 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ * Copyright (C) 2007 - 2011 PetaLogix
+ */
+
+#ifndef _ASM_MICROBLAZE_PVR_H
+#define _ASM_MICROBLAZE_PVR_H
+
+#define PVR_MSR_BIT 0x400
+
+struct pvr_s {
+	unsigned pvr[12];
+};
+
+/* The following taken from Xilinx's standalone BSP pvr.h */
+
+/* Basic PVR mask */
+#define PVR0_PVR_FULL_MASK		0x80000000
+#define PVR0_USE_BARREL_MASK		0x40000000
+#define PVR0_USE_DIV_MASK		0x20000000
+#define PVR0_USE_HW_MUL_MASK		0x10000000
+#define PVR0_USE_FPU_MASK		0x08000000
+#define PVR0_USE_EXC_MASK		0x04000000
+#define PVR0_USE_ICACHE_MASK		0x02000000
+#define PVR0_USE_DCACHE_MASK		0x01000000
+#define PVR0_USE_MMU			0x00800000
+#define PVR0_USE_BTC			0x00400000
+#define PVR0_ENDI			0x00200000
+#define PVR0_VERSION_MASK		0x0000FF00
+#define PVR0_USER1_MASK			0x000000FF
+
+/* User 2 PVR mask */
+#define PVR1_USER2_MASK			0xFFFFFFFF
+
+/* Configuration PVR masks */
+#define PVR2_D_OPB_MASK			0x80000000 /* or AXI */
+#define PVR2_D_LMB_MASK			0x40000000
+#define PVR2_I_OPB_MASK			0x20000000 /* or AXI */
+#define PVR2_I_LMB_MASK			0x10000000
+#define PVR2_INTERRUPT_IS_EDGE_MASK	0x08000000
+#define PVR2_EDGE_IS_POSITIVE_MASK	0x04000000
+#define PVR2_D_PLB_MASK			0x02000000 /* new */
+#define PVR2_I_PLB_MASK			0x01000000 /* new */
+#define PVR2_INTERCONNECT		0x00800000 /* new */
+#define PVR2_USE_EXTEND_FSL		0x00080000 /* new */
+#define PVR2_USE_FSL_EXC		0x00040000 /* new */
+#define PVR2_USE_MSR_INSTR		0x00020000
+#define PVR2_USE_PCMP_INSTR		0x00010000
+#define PVR2_AREA_OPTIMISED		0x00008000
+#define PVR2_USE_BARREL_MASK		0x00004000
+#define PVR2_USE_DIV_MASK		0x00002000
+#define PVR2_USE_HW_MUL_MASK		0x00001000
+#define PVR2_USE_FPU_MASK		0x00000800
+#define PVR2_USE_MUL64_MASK		0x00000400
+#define PVR2_USE_FPU2_MASK		0x00000200 /* new */
+#define PVR2_USE_IPLBEXC 		0x00000100
+#define PVR2_USE_DPLBEXC		0x00000080
+#define PVR2_OPCODE_0x0_ILL_MASK	0x00000040
+#define PVR2_UNALIGNED_EXC_MASK		0x00000020
+#define PVR2_ILL_OPCODE_EXC_MASK	0x00000010
+#define PVR2_IOPB_BUS_EXC_MASK		0x00000008 /* or AXI */
+#define PVR2_DOPB_BUS_EXC_MASK		0x00000004 /* or AXI */
+#define PVR2_DIV_ZERO_EXC_MASK		0x00000002
+#define PVR2_FPU_EXC_MASK		0x00000001
+
+/* Debug and exception PVR masks */
+#define PVR3_DEBUG_ENABLED_MASK		0x80000000
+#define PVR3_NUMBER_OF_PC_BRK_MASK	0x1E000000
+#define PVR3_NUMBER_OF_RD_ADDR_BRK_MASK	0x00380000
+#define PVR3_NUMBER_OF_WR_ADDR_BRK_MASK	0x0000E000
+#define PVR3_FSL_LINKS_MASK		0x00000380
+
+/* ICache config PVR masks */
+#define PVR4_USE_ICACHE_MASK		0x80000000 /* ICU */
+#define PVR4_ICACHE_ADDR_TAG_BITS_MASK	0x7C000000 /* ICTS */
+#define PVR4_ICACHE_ALLOW_WR_MASK	0x01000000 /* ICW */
+#define PVR4_ICACHE_LINE_LEN_MASK	0x00E00000 /* ICLL */
+#define PVR4_ICACHE_BYTE_SIZE_MASK	0x001F0000 /* ICBS */
+#define PVR4_ICACHE_ALWAYS_USED		0x00008000 /* IAU */
+#define PVR4_ICACHE_INTERFACE		0x00002000 /* ICI */
+
+/* DCache config PVR masks */
+#define PVR5_USE_DCACHE_MASK		0x80000000 /* DCU */
+#define PVR5_DCACHE_ADDR_TAG_BITS_MASK	0x7C000000 /* DCTS */
+#define PVR5_DCACHE_ALLOW_WR_MASK	0x01000000 /* DCW */
+#define PVR5_DCACHE_LINE_LEN_MASK	0x00E00000 /* DCLL */
+#define PVR5_DCACHE_BYTE_SIZE_MASK	0x001F0000 /* DCBS */
+#define PVR5_DCACHE_ALWAYS_USED		0x00008000 /* DAU */
+#define PVR5_DCACHE_USE_WRITEBACK	0x00004000 /* DWB */
+#define PVR5_DCACHE_INTERFACE		0x00002000 /* DCI */
+
+/* ICache base address PVR mask */
+#define PVR6_ICACHE_BASEADDR_MASK	0xFFFFFFFF
+
+/* ICache high address PVR mask */
+#define PVR7_ICACHE_HIGHADDR_MASK	0xFFFFFFFF
+
+/* DCache base address PVR mask */
+#define PVR8_DCACHE_BASEADDR_MASK	0xFFFFFFFF
+
+/* DCache high address PVR mask */
+#define PVR9_DCACHE_HIGHADDR_MASK	0xFFFFFFFF
+
+/* Target family PVR mask */
+#define PVR10_TARGET_FAMILY_MASK	0xFF000000
+
+/* MMU description */
+#define PVR11_USE_MMU			0xC0000000
+#define PVR11_MMU_ITLB_SIZE		0x38000000
+#define PVR11_MMU_DTLB_SIZE		0x07000000
+#define PVR11_MMU_TLB_ACCESS		0x00C00000
+#define PVR11_MMU_ZONES			0x003C0000
+#define PVR11_MMU_PRIVINS		0x00010000
+/* MSR Reset value PVR mask */
+#define PVR11_MSR_RESET_VALUE_MASK	0x000007FF
+
+/* PVR access macros */
+#define PVR_IS_FULL(_pvr)	(_pvr.pvr[0] & PVR0_PVR_FULL_MASK)
+#define PVR_USE_BARREL(_pvr)	(_pvr.pvr[0] & PVR0_USE_BARREL_MASK)
+#define PVR_USE_DIV(_pvr)	(_pvr.pvr[0] & PVR0_USE_DIV_MASK)
+#define PVR_USE_HW_MUL(_pvr)	(_pvr.pvr[0] & PVR0_USE_HW_MUL_MASK)
+#define PVR_USE_FPU(_pvr)	(_pvr.pvr[0] & PVR0_USE_FPU_MASK)
+#define PVR_USE_FPU2(_pvr)	(_pvr.pvr[2] & PVR2_USE_FPU2_MASK)
+#define PVR_USE_ICACHE(_pvr)	(_pvr.pvr[0] & PVR0_USE_ICACHE_MASK)
+#define PVR_USE_DCACHE(_pvr)	(_pvr.pvr[0] & PVR0_USE_DCACHE_MASK)
+#define PVR_VERSION(_pvr)	((_pvr.pvr[0] & PVR0_VERSION_MASK) >> 8)
+#define PVR_USER1(_pvr)		(_pvr.pvr[0] & PVR0_USER1_MASK)
+#define PVR_USER2(_pvr)		(_pvr.pvr[1] & PVR1_USER2_MASK)
+
+#define PVR_D_OPB(_pvr)		(_pvr.pvr[2] & PVR2_D_OPB_MASK)
+#define PVR_D_LMB(_pvr)		(_pvr.pvr[2] & PVR2_D_LMB_MASK)
+#define PVR_I_OPB(_pvr)		(_pvr.pvr[2] & PVR2_I_OPB_MASK)
+#define PVR_I_LMB(_pvr)		(_pvr.pvr[2] & PVR2_I_LMB_MASK)
+#define PVR_INTERRUPT_IS_EDGE(_pvr) \
+			(_pvr.pvr[2] & PVR2_INTERRUPT_IS_EDGE_MASK)
+#define PVR_EDGE_IS_POSITIVE(_pvr) \
+			(_pvr.pvr[2] & PVR2_EDGE_IS_POSITIVE_MASK)
+#define PVR_USE_MSR_INSTR(_pvr)		(_pvr.pvr[2] & PVR2_USE_MSR_INSTR)
+#define PVR_USE_PCMP_INSTR(_pvr)	(_pvr.pvr[2] & PVR2_USE_PCMP_INSTR)
+#define PVR_AREA_OPTIMISED(_pvr)	(_pvr.pvr[2] & PVR2_AREA_OPTIMISED)
+#define PVR_USE_MUL64(_pvr)		(_pvr.pvr[2] & PVR2_USE_MUL64_MASK)
+#define PVR_OPCODE_0x0_ILLEGAL(_pvr) \
+			(_pvr.pvr[2] & PVR2_OPCODE_0x0_ILL_MASK)
+#define PVR_UNALIGNED_EXCEPTION(_pvr) \
+			(_pvr.pvr[2] & PVR2_UNALIGNED_EXC_MASK)
+#define PVR_ILL_OPCODE_EXCEPTION(_pvr) \
+			(_pvr.pvr[2] & PVR2_ILL_OPCODE_EXC_MASK)
+#define PVR_IOPB_BUS_EXCEPTION(_pvr) \
+			(_pvr.pvr[2] & PVR2_IOPB_BUS_EXC_MASK)
+#define PVR_DOPB_BUS_EXCEPTION(_pvr) \
+			(_pvr.pvr[2] & PVR2_DOPB_BUS_EXC_MASK)
+#define PVR_DIV_ZERO_EXCEPTION(_pvr) \
+			(_pvr.pvr[2] & PVR2_DIV_ZERO_EXC_MASK)
+#define PVR_FPU_EXCEPTION(_pvr)		(_pvr.pvr[2] & PVR2_FPU_EXC_MASK)
+#define PVR_FSL_EXCEPTION(_pvr)		(_pvr.pvr[2] & PVR2_USE_EXTEND_FSL)
+
+#define PVR_DEBUG_ENABLED(_pvr)		(_pvr.pvr[3] & PVR3_DEBUG_ENABLED_MASK)
+#define PVR_NUMBER_OF_PC_BRK(_pvr) \
+			((_pvr.pvr[3] & PVR3_NUMBER_OF_PC_BRK_MASK) >> 25)
+#define PVR_NUMBER_OF_RD_ADDR_BRK(_pvr) \
+			((_pvr.pvr[3] & PVR3_NUMBER_OF_RD_ADDR_BRK_MASK) >> 19)
+#define PVR_NUMBER_OF_WR_ADDR_BRK(_pvr) \
+			((_pvr.pvr[3] & PVR3_NUMBER_OF_WR_ADDR_BRK_MASK) >> 13)
+#define PVR_FSL_LINKS(_pvr)	((_pvr.pvr[3] & PVR3_FSL_LINKS_MASK) >> 7)
+
+#define PVR_ICACHE_ADDR_TAG_BITS(_pvr) \
+		((_pvr.pvr[4] & PVR4_ICACHE_ADDR_TAG_BITS_MASK) >> 26)
+#define PVR_ICACHE_USE_FSL(_pvr) \
+		(_pvr.pvr[4] & PVR4_ICACHE_USE_FSL_MASK)
+#define PVR_ICACHE_ALLOW_WR(_pvr) \
+		(_pvr.pvr[4] & PVR4_ICACHE_ALLOW_WR_MASK)
+#define PVR_ICACHE_LINE_LEN(_pvr) \
+		(1 << ((_pvr.pvr[4] & PVR4_ICACHE_LINE_LEN_MASK) >> 21))
+#define PVR_ICACHE_BYTE_SIZE(_pvr) \
+		(1 << ((_pvr.pvr[4] & PVR4_ICACHE_BYTE_SIZE_MASK) >> 16))
+
+#define PVR_DCACHE_ADDR_TAG_BITS(_pvr) \
+			((_pvr.pvr[5] & PVR5_DCACHE_ADDR_TAG_BITS_MASK) >> 26)
+#define PVR_DCACHE_USE_FSL(_pvr)	(_pvr.pvr[5] & PVR5_DCACHE_USE_FSL_MASK)
+#define PVR_DCACHE_ALLOW_WR(_pvr) \
+			(_pvr.pvr[5] & PVR5_DCACHE_ALLOW_WR_MASK)
+/* FIXME two shifts on one line needs any comment */
+#define PVR_DCACHE_LINE_LEN(_pvr) \
+		(1 << ((_pvr.pvr[5] & PVR5_DCACHE_LINE_LEN_MASK) >> 21))
+#define PVR_DCACHE_BYTE_SIZE(_pvr) \
+		(1 << ((_pvr.pvr[5] & PVR5_DCACHE_BYTE_SIZE_MASK) >> 16))
+
+#define PVR_DCACHE_USE_WRITEBACK(_pvr) \
+			((_pvr.pvr[5] & PVR5_DCACHE_USE_WRITEBACK) >> 14)
+
+#define PVR_ICACHE_BASEADDR(_pvr) \
+			(_pvr.pvr[6] & PVR6_ICACHE_BASEADDR_MASK)
+#define PVR_ICACHE_HIGHADDR(_pvr) \
+			(_pvr.pvr[7] & PVR7_ICACHE_HIGHADDR_MASK)
+#define PVR_DCACHE_BASEADDR(_pvr) \
+			(_pvr.pvr[8] & PVR8_DCACHE_BASEADDR_MASK)
+#define PVR_DCACHE_HIGHADDR(_pvr) \
+			(_pvr.pvr[9] & PVR9_DCACHE_HIGHADDR_MASK)
+
+#define PVR_TARGET_FAMILY(_pvr) \
+			((_pvr.pvr[10] & PVR10_TARGET_FAMILY_MASK) >> 24)
+
+#define PVR_MSR_RESET_VALUE(_pvr) \
+			(_pvr.pvr[11] & PVR11_MSR_RESET_VALUE_MASK)
+
+/* mmu */
+#define PVR_USE_MMU(_pvr)		((_pvr.pvr[11] & PVR11_USE_MMU) >> 30)
+#define PVR_MMU_ITLB_SIZE(_pvr)		(_pvr.pvr[11] & PVR11_MMU_ITLB_SIZE)
+#define PVR_MMU_DTLB_SIZE(_pvr)		(_pvr.pvr[11] & PVR11_MMU_DTLB_SIZE)
+#define PVR_MMU_TLB_ACCESS(_pvr)	(_pvr.pvr[11] & PVR11_MMU_TLB_ACCESS)
+#define PVR_MMU_ZONES(_pvr)		(_pvr.pvr[11] & PVR11_MMU_ZONES)
+#define PVR_MMU_PRIVINS(pvr)		(pvr.pvr[11] & PVR11_MMU_PRIVINS)
+
+/* endian */
+#define PVR_ENDIAN(_pvr)	(_pvr.pvr[0] & PVR0_ENDI)
+
+int cpu_has_pvr(void);
+void get_pvr(struct pvr_s *pvr);
+
+#endif /* _ASM_MICROBLAZE_PVR_H */

linux-7.2.3/arch/microblaze/include/asm/registers.h

@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_REGISTERS_H
+#define _ASM_MICROBLAZE_REGISTERS_H
+
+#define MSR_BE	(1<<0) /* 0x001 */
+#define MSR_IE	(1<<1) /* 0x002 */
+#define MSR_C	(1<<2) /* 0x004 */
+#define MSR_BIP	(1<<3) /* 0x008 */
+#define MSR_FSL	(1<<4) /* 0x010 */
+#define MSR_ICE	(1<<5) /* 0x020 */
+#define MSR_DZ	(1<<6) /* 0x040 */
+#define MSR_DCE	(1<<7) /* 0x080 */
+#define MSR_EE	(1<<8) /* 0x100 */
+#define MSR_EIP	(1<<9) /* 0x200 */
+#define MSR_CC	(1<<31)
+
+/* Floating Point Status Register (FSR) Bits */
+#define FSR_IO		(1<<4) /* Invalid operation */
+#define FSR_DZ		(1<<3) /* Divide-by-zero */
+#define FSR_OF		(1<<2) /* Overflow */
+#define FSR_UF		(1<<1) /* Underflow */
+#define FSR_DO		(1<<0) /* Denormalized operand error */
+
+/* Machine State Register (MSR) Fields */
+# define MSR_UM		(1<<11) /* User Mode */
+# define MSR_UMS	(1<<12) /* User Mode Save */
+# define MSR_VM		(1<<13) /* Virtual Mode */
+# define MSR_VMS	(1<<14) /* Virtual Mode Save */
+
+# define MSR_KERNEL	(MSR_EE | MSR_VM)
+/* # define MSR_USER	(MSR_KERNEL | MSR_UM | MSR_IE) */
+# define MSR_KERNEL_VMS	(MSR_EE | MSR_VMS)
+/* # define MSR_USER_VMS	(MSR_KERNEL_VMS | MSR_UMS | MSR_IE) */
+
+/* Exception State Register (ESR) Fields */
+# define	  ESR_DIZ	(1<<11) /* Zone Protection */
+# define	  ESR_S		(1<<10) /* Store instruction */
+
+#endif /* _ASM_MICROBLAZE_REGISTERS_H */

linux-7.2.3/arch/microblaze/include/asm/seccomp.h

@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_MICROBLAZE_SECCOMP_H
+#define _ASM_MICROBLAZE_SECCOMP_H
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_sigreturn		__NR_sigreturn
+
+#include <asm-generic/seccomp.h>
+
+#endif	/* _ASM_MICROBLAZE_SECCOMP_H */

linux-7.2.3/arch/microblaze/include/asm/sections.h

@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_SECTIONS_H
+#define _ASM_MICROBLAZE_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+# ifndef __ASSEMBLER__
+extern char _ssbss[], _esbss[];
+extern unsigned long __ivt_start[], __ivt_end[];
+
+extern u32 _fdt_start[], _fdt_end[];
+
+# endif /* !__ASSEMBLER__ */
+#endif /* _ASM_MICROBLAZE_SECTIONS_H */

linux-7.2.3/arch/microblaze/include/asm/setup.h

@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+#ifndef _ASM_MICROBLAZE_SETUP_H
+#define _ASM_MICROBLAZE_SETUP_H
+
+#include <uapi/asm/setup.h>
+
+# ifndef __ASSEMBLER__
+extern char cmd_line[COMMAND_LINE_SIZE];
+
+extern char *klimit;
+
+extern void mmu_reset(void);
+
+void machine_early_init(const char *cmdline, unsigned int ram,
+		unsigned int fdt, unsigned int msr, unsigned int tlb0,
+		unsigned int tlb1);
+
+void machine_restart(char *cmd);
+void machine_shutdown(void);
+void machine_halt(void);
+void machine_power_off(void);
+
+# endif /* __ASSEMBLER__ */
+#endif /* _ASM_MICROBLAZE_SETUP_H */

linux-7.2.3/arch/microblaze/include/asm/string.h

@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_STRING_H
+#define _ASM_MICROBLAZE_STRING_H
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_OPT_LIB_FUNCTION
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *memmove(void *, const void *, __kernel_size_t);
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_MICROBLAZE_STRING_H */

linux-7.2.3/arch/microblaze/include/asm/switch_to.h

@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_SWITCH_TO_H
+#define _ASM_MICROBLAZE_SWITCH_TO_H
+
+struct task_struct;
+struct thread_info;
+
+extern struct task_struct *_switch_to(struct thread_info *prev,
+					struct thread_info *next);
+
+#define switch_to(prev, next, last)					\
+	do {								\
+		(last) = _switch_to(task_thread_info(prev),		\
+					task_thread_info(next));	\
+	} while (0)
+
+#endif /* _ASM_MICROBLAZE_SWITCH_TO_H */

linux-7.2.3/arch/microblaze/include/asm/syscall.h

@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MICROBLAZE_SYSCALL_H
+#define __ASM_MICROBLAZE_SYSCALL_H
+
+#include <uapi/linux/audit.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in R12 */
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return regs->r12;
+}
+
+static inline void syscall_set_nr(struct task_struct *task,
+				  struct pt_regs *regs,
+				  int nr)
+{
+	regs->r12 = nr;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	/* TODO.  */
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return IS_ERR_VALUE(regs->r3) ? regs->r3 : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->r3;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error)
+		regs->r3 = -error;
+	else
+		regs->r3 = val;
+}
+
+static inline microblaze_reg_t microblaze_get_syscall_arg(struct pt_regs *regs,
+							  unsigned int n)
+{
+	switch (n) {
+	case 5: return regs->r10;
+	case 4: return regs->r9;
+	case 3: return regs->r8;
+	case 2: return regs->r7;
+	case 1: return regs->r6;
+	case 0: return regs->r5;
+	default:
+		BUG();
+	}
+	return ~0;
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned long *args)
+{
+	unsigned int i = 0;
+	unsigned int n = 6;
+
+	while (n--)
+		*args++ = microblaze_get_syscall_arg(regs, i++);
+}
+
+asmlinkage unsigned long do_syscall_trace_enter(struct pt_regs *regs);
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
+
+static inline int syscall_get_arch(struct task_struct *task)
+{
+	return AUDIT_ARCH_MICROBLAZE;
+}
+#endif /* __ASM_MICROBLAZE_SYSCALL_H */

linux-7.2.3/arch/microblaze/include/asm/thread_info.h

@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_THREAD_INFO_H
+#define _ASM_MICROBLAZE_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+/* we have 8k stack */
+#define THREAD_SHIFT		13
+#define THREAD_SIZE		(1 << THREAD_SHIFT)
+#define THREAD_SIZE_ORDER	1
+
+#ifndef __ASSEMBLER__
+# include <linux/types.h>
+# include <asm/processor.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *	 must also be changed
+ */
+
+struct cpu_context {
+	__u32	r1; /* stack pointer */
+	__u32	r2;
+	/* dedicated registers */
+	__u32	r13;
+	__u32	r14;
+	__u32	r15;
+	__u32	r16;
+	__u32	r17;
+	__u32	r18;
+	/* non-volatile registers */
+	__u32	r19;
+	__u32	r20;
+	__u32	r21;
+	__u32	r22;
+	__u32	r23;
+	__u32	r24;
+	__u32	r25;
+	__u32	r26;
+	__u32	r27;
+	__u32	r28;
+	__u32	r29;
+	__u32	r30;
+	/* r31 is used as current task pointer */
+	/* special purpose registers */
+	__u32	msr;
+	__u32	ear;
+	__u32	esr;
+	__u32	fsr;
+};
+
+struct thread_info {
+	struct task_struct	*task; /* main task structure */
+	unsigned long		flags; /* low level flags */
+	unsigned long		status; /* thread-synchronous flags */
+	__u32			cpu; /* current CPU */
+	__s32			preempt_count; /* 0 => preemptable,< 0 => BUG*/
+
+	struct cpu_context	cpu_context;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
+}
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	register unsigned long sp asm("r1");
+
+	return (struct thread_info *)(sp & ~(THREAD_SIZE-1));
+}
+
+/* thread information allocation */
+#endif /* __ASSEMBLER__ */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may
+ *   need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0 /* syscall trace active */
+#define TIF_NOTIFY_RESUME	1 /* resumption notification requested */
+#define TIF_SIGPENDING		2 /* signal pending */
+#define TIF_NEED_RESCHED	3 /* rescheduling necessary */
+/* restore singlestep on return to user mode */
+#define TIF_SINGLESTEP		4
+#define TIF_NOTIFY_SIGNAL	5	/* signal notifications exist */
+#define TIF_MEMDIE		6	/* is terminating due to OOM killer */
+#define TIF_SYSCALL_AUDIT	9       /* syscall auditing active */
+#define TIF_SECCOMP		10      /* secure computing */
+
+/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_POLLING_NRFLAG	16
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_NOTIFY_SIGNAL	(1 << TIF_NOTIFY_SIGNAL)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
+
+/* work to do in syscall trace */
+#define _TIF_WORK_SYSCALL_MASK  (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
+				 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK		0x0000FFFE
+
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK	0x0000FFFF
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+/* FPU was used by this task this quantum (SMP) */
+#define TS_USEDFPU		0x0001
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_THREAD_INFO_H */

linux-7.2.3/arch/microblaze/include/asm/timex.h

@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_TIMEX_H
+#define _ASM_MICROBLAZE_TIMEX_H
+
+#include <asm-generic/timex.h>
+
+#define CLOCK_TICK_RATE 1000 /* Timer input freq. */
+
+#endif /* _ASM_TIMEX_H */

linux-7.2.3/arch/microblaze/include/asm/tlbflush.h

@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_TLBFLUSH_H
+#define _ASM_MICROBLAZE_TLBFLUSH_H
+
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h>	/* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+extern void _tlbie(unsigned long address);
+extern void _tlbia(void);
+
+#define __tlbia()	{ preempt_disable(); _tlbia(); preempt_enable(); }
+#define __tlbie(x)	{ _tlbie(x); }
+
+static inline void local_flush_tlb_all(void)
+	{ __tlbia(); }
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+	{ __tlbia(); }
+static inline void local_flush_tlb_page(struct vm_area_struct *vma,
+				unsigned long vmaddr)
+	{ __tlbie(vmaddr); }
+static inline void local_flush_tlb_range(struct vm_area_struct *vma,
+		unsigned long start, unsigned long end)
+	{ __tlbia(); }
+
+#define flush_tlb_kernel_range(start, end)	do { } while (0)
+
+#define update_mmu_cache_range(vmf, vma, addr, ptep, nr) do { } while (0)
+#define update_mmu_cache(vma, addr, pte) \
+	update_mmu_cache_range(NULL, vma, addr, ptep, 1)
+
+#define flush_tlb_all local_flush_tlb_all
+#define flush_tlb_mm local_flush_tlb_mm
+#define flush_tlb_page local_flush_tlb_page
+#define flush_tlb_range local_flush_tlb_range
+
+/*
+ * This is called in munmap when we have freed up some page-table
+ * pages.  We don't need to do anything here, there's nothing special
+ * about our page-table pages.  -- paulus
+ */
+static inline void flush_tlb_pgtables(struct mm_struct *mm,
+	unsigned long start, unsigned long end) { }
+
+#endif /* _ASM_MICROBLAZE_TLBFLUSH_H */

linux-7.2.3/arch/microblaze/include/asm/uaccess.h

@@ -0,0 +1,268 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_UACCESS_H
+#define _ASM_MICROBLAZE_UACCESS_H
+
+#include <linux/kernel.h>
+
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <linux/pgtable.h>
+#include <asm/extable.h>
+#include <linux/string.h>
+#include <asm-generic/access_ok.h>
+
+# define __FIXUP_SECTION	".section .fixup,\"ax\"\n"
+# define __EX_TABLE_SECTION	".section __ex_table,\"a\"\n"
+
+extern unsigned long __copy_tofrom_user(void __user *to,
+		const void __user *from, unsigned long size);
+
+/* Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail. */
+static inline unsigned long __must_check __clear_user(void __user *to,
+							unsigned long n)
+{
+	/* normal memset with two words to __ex_table */
+	__asm__ __volatile__ (				\
+			"1:	sb	r0, %1, r0;"	\
+			"	addik	%0, %0, -1;"	\
+			"	bneid	%0, 1b;"	\
+			"	addik	%1, %1, 1;"	\
+			"2:			"	\
+			__EX_TABLE_SECTION		\
+			".word	1b,2b;"			\
+			".previous;"			\
+		: "=r"(n), "=r"(to)			\
+		: "0"(n), "1"(to)
+	);
+	return n;
+}
+
+static inline unsigned long __must_check clear_user(void __user *to,
+							unsigned long n)
+{
+	might_fault();
+	if (unlikely(!access_ok(to, n)))
+		return n;
+
+	return __clear_user(to, n);
+}
+
+/* put_user and get_user macros */
+extern long __user_bad(void);
+
+#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
+({								\
+	__asm__ __volatile__ (					\
+			"1:"	insn	" %1, %2, r0;"		\
+			"	addk	%0, r0, r0;"		\
+			"2:			"		\
+			__FIXUP_SECTION				\
+			"3:	brid	2b;"			\
+			"	addik	%0, r0, %3;"		\
+			".previous;"				\
+			__EX_TABLE_SECTION			\
+			".word	1b,3b;"				\
+			".previous;"				\
+		: "=&r"(__gu_err), "=r"(__gu_val)		\
+		: "r"(__gu_ptr), "i"(-EFAULT)			\
+	);							\
+})
+
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep if pagefaults are
+ *          enabled.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x, ptr) ({				\
+	const typeof(*(ptr)) __user *__gu_ptr = (ptr);	\
+	access_ok(__gu_ptr, sizeof(*__gu_ptr)) ?	\
+		__get_user(x, __gu_ptr) : -EFAULT;	\
+})
+
+#define __get_user(x, ptr)						\
+({									\
+	long __gu_err;							\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		__get_user_asm("lbu", (ptr), x, __gu_err);		\
+		break;							\
+	case 2:								\
+		__get_user_asm("lhu", (ptr), x, __gu_err);		\
+		break;							\
+	case 4:								\
+		__get_user_asm("lw", (ptr), x, __gu_err);		\
+		break;							\
+	case 8: {							\
+		__u64 __x = 0;						\
+		__gu_err = raw_copy_from_user(&__x, ptr, 8) ?		\
+							-EFAULT : 0;	\
+		(x) = (typeof(x))(typeof((x) - (x)))__x;		\
+		break;							\
+	}								\
+	default:							\
+		/* __gu_val = 0; __gu_err = -EINVAL;*/ __gu_err = __user_bad();\
+	}								\
+	__gu_err;							\
+})
+
+
+#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
+({								\
+	__asm__ __volatile__ (					\
+			"1:"	insn	" %1, %2, r0;"		\
+			"	addk	%0, r0, r0;"		\
+			"2:			"		\
+			__FIXUP_SECTION				\
+			"3:	brid	2b;"			\
+			"	addik	%0, r0, %3;"		\
+			".previous;"				\
+			__EX_TABLE_SECTION			\
+			".word	1b,3b;"				\
+			".previous;"				\
+		: "=&r"(__gu_err)				\
+		: "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT)	\
+	);							\
+})
+
+#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err)		\
+({								\
+	__asm__ __volatile__ ("	lwi	%0, %1, 0;"		\
+			"1:	swi	%0, %2, 0;"		\
+			"	lwi	%0, %1, 4;"		\
+			"2:	swi	%0, %2, 4;"		\
+			"	addk	%0, r0, r0;"		\
+			"3:			"		\
+			__FIXUP_SECTION				\
+			"4:	brid	3b;"			\
+			"	addik	%0, r0, %3;"		\
+			".previous;"				\
+			__EX_TABLE_SECTION			\
+			".word	1b,4b,2b,4b;"			\
+			".previous;"				\
+		: "=&r"(__gu_err)				\
+		: "r"(&__gu_val), "r"(__gu_ptr), "i"(-EFAULT)	\
+		);						\
+})
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep if pagefaults are
+ *          enabled.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x, ptr)						\
+	__put_user_check((x), (ptr), sizeof(*(ptr)))
+
+#define __put_user_check(x, ptr, size)					\
+({									\
+	typeof(*(ptr)) volatile __pu_val = x;				\
+	typeof(*(ptr)) __user *__pu_addr = (ptr);			\
+	int __pu_err = 0;						\
+									\
+	if (access_ok(__pu_addr, size)) {			\
+		switch (size) {						\
+		case 1:							\
+			__put_user_asm("sb", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 2:							\
+			__put_user_asm("sh", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 4:							\
+			__put_user_asm("sw", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 8:							\
+			__put_user_asm_8(__pu_addr, __pu_val, __pu_err);\
+			break;						\
+		default:						\
+			__pu_err = __user_bad();			\
+			break;						\
+		}							\
+	} else {							\
+		__pu_err = -EFAULT;					\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user(x, ptr)						\
+({									\
+	__typeof__(*(ptr)) volatile __gu_val = (x);			\
+	long __gu_err = 0;						\
+	switch (sizeof(__gu_val)) {					\
+	case 1:								\
+		__put_user_asm("sb", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 2:								\
+		__put_user_asm("sh", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 4:								\
+		__put_user_asm("sw", (ptr), __gu_val, __gu_err);	\
+		break;							\
+	case 8:								\
+		__put_user_asm_8((ptr), __gu_val, __gu_err);		\
+		break;							\
+	default:							\
+		/*__gu_err = -EINVAL;*/	__gu_err = __user_bad();	\
+	}								\
+	__gu_err;							\
+})
+
+static inline unsigned long
+raw_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	return __copy_tofrom_user((__force void __user *)to, from, n);
+}
+
+static inline unsigned long
+raw_copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	return __copy_tofrom_user(to, (__force const void __user *)from, n);
+}
+#define INLINE_COPY_USER
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+__must_check long strncpy_from_user(char *dst, const char __user *src,
+				    long count);
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+__must_check long strnlen_user(const char __user *sstr, long len);
+
+#endif /* _ASM_MICROBLAZE_UACCESS_H */

linux-7.2.3/arch/microblaze/include/asm/unistd.h

@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+#ifndef _ASM_MICROBLAZE_UNISTD_H
+#define _ASM_MICROBLAZE_UNISTD_H
+
+#include <uapi/asm/unistd.h>
+
+#ifndef __ASSEMBLER__
+
+/* #define __ARCH_WANT_OLD_READDIR */
+/* #define __ARCH_WANT_OLD_STAT */
+#define __ARCH_WANT_NEW_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME32
+#define __ARCH_WANT_SYS_UTIME32
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_NICE
+/* #define __ARCH_WANT_SYS_OLD_GETRLIMIT */
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_CLONE
+#define __ARCH_WANT_SYS_VFORK
+#define __ARCH_WANT_SYS_FORK
+
+#endif /* __ASSEMBLER__ */
+
+#endif /* _ASM_MICROBLAZE_UNISTD_H */

linux-7.2.3/arch/microblaze/include/asm/unwind.h

@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Backtrace support for Microblaze
+ *
+ * Copyright (C) 2010  Digital Design Corporation
+ */
+
+#ifndef __MICROBLAZE_UNWIND_H
+#define __MICROBLAZE_UNWIND_H
+
+struct stack_trace;
+
+struct trap_handler_info {
+	unsigned long start_addr;
+	unsigned long end_addr;
+	const char    *trap_name;
+};
+extern struct trap_handler_info microblaze_trap_handlers;
+
+extern const char _hw_exception_handler;
+extern const char ex_handler_unhandled;
+
+void microblaze_unwind(struct task_struct *task, struct stack_trace *trace,
+		       const char *loglvl);
+
+#endif	/* __MICROBLAZE_UNWIND_H */
+

linux-7.2.3/arch/microblaze/include/asm/vmalloc.h

@@ -0,0 +1,4 @@
+#ifndef _ASM_MICROBLAZE_VMALLOC_H
+#define _ASM_MICROBLAZE_VMALLOC_H
+
+#endif /* _ASM_MICROBLAZE_VMALLOC_H */

linux-7.2.3/arch/microblaze/include/asm/xilinx_mb_manager.h

@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2022 Xilinx, Inc.
+ */
+#ifndef _XILINX_MB_MANAGER_H
+#define _XILINX_MB_MANAGER_H
+
+# ifndef __ASSEMBLER__
+
+#include <linux/of_address.h>
+
+/*
+ * When the break vector gets asserted because of error injection, the break
+ * signal must be blocked before exiting from the break handler, Below api
+ * updates the manager address and control register and error counter callback
+ * arguments, which will be used by the break handler to block the break and
+ * call the callback function.
+ */
+void xmb_manager_register(uintptr_t phys_baseaddr, u32 cr_val,
+			  void (*callback)(void *data),
+			  void *priv, void (*reset_callback)(void *data));
+asmlinkage void xmb_inject_err(void);
+
+# endif /* __ASSEMBLER__ */
+
+/* Error injection offset */
+#define XMB_INJECT_ERR_OFFSET	0x200
+
+#endif /* _XILINX_MB_MANAGER_H */

linux-7.2.3/arch/microblaze/include/uapi/asm/Kbuild

@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+generated-y += unistd_32.h
+generic-y += ucontext.h

linux-7.2.3/arch/microblaze/include/uapi/asm/auxvec.h

@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+

linux-7.2.3/arch/microblaze/include/uapi/asm/byteorder.h

@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_MICROBLAZE_BYTEORDER_H
+#define _ASM_MICROBLAZE_BYTEORDER_H
+
+#ifdef __MICROBLAZEEL__
+#include <linux/byteorder/little_endian.h>
+#else
+#include <linux/byteorder/big_endian.h>
+#endif
+
+#endif /* _ASM_MICROBLAZE_BYTEORDER_H */

linux-7.2.3/arch/microblaze/include/uapi/asm/elf.h

@@ -0,0 +1,123 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _UAPI_ASM_MICROBLAZE_ELF_H
+#define _UAPI_ASM_MICROBLAZE_ELF_H
+
+#include <linux/elf-em.h>
+
+/*
+ * Note there is no "official" ELF designation for Microblaze.
+ * I've snaffled the value from the microblaze binutils source code
+ * /binutils/microblaze/include/elf/microblaze.h
+ */
+#define EM_MICROBLAZE_OLD	0xbaab
+#define ELF_ARCH		EM_MICROBLAZE
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)	((x)->e_machine == EM_MICROBLAZE \
+				 || (x)->e_machine == EM_MICROBLAZE_OLD)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+
+#ifndef __uClinux__
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/byteorder.h>
+
+#ifndef ELF_GREG_T
+#define ELF_GREG_T
+typedef unsigned long elf_greg_t;
+#endif
+
+#ifndef ELF_NGREG
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+#endif
+
+#ifndef ELF_GREGSET_T
+#define ELF_GREGSET_T
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+#endif
+
+#ifndef ELF_FPREGSET_T
+#define ELF_FPREGSET_T
+
+/* TBD */
+#define ELF_NFPREG	33	/* includes fsr */
+typedef unsigned long elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* typedef struct user_fpu_struct elf_fpregset_t; */
+#endif
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader.  We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ */
+
+#define ELF_ET_DYN_BASE         (0x08000000)
+
+#ifdef __MICROBLAZEEL__
+#define ELF_DATA	ELFDATA2LSB
+#else
+#define ELF_DATA	ELFDATA2MSB
+#endif
+
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+
+#define ELF_CORE_COPY_REGS(_dest, _regs)			\
+	memcpy((char *) &_dest, (char *) _regs,		\
+	sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports.  This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+
+ * For the moment, we have only optimizations for the Intel generations,
+ * but that could change...
+ */
+#define ELF_PLATFORM  (NULL)
+
+/* Added _f parameter. Is this definition correct: TBD */
+#define ELF_PLAT_INIT(_r, _f)				\
+do {							\
+	_r->r0 =  _r->r1 =  _r->r2 =  _r->r3 =		\
+	_r->r4 =  _r->r5 =  _r->r6 =  _r->r7 =		\
+	_r->r8 =  _r->r9 =  _r->r10 = _r->r11 =		\
+	_r->r12 = _r->r13 = _r->r14 = _r->r15 =		\
+	_r->r16 = _r->r17 = _r->r18 = _r->r19 =		\
+	_r->r20 = _r->r21 = _r->r22 = _r->r23 =		\
+	_r->r24 = _r->r25 = _r->r26 = _r->r27 =		\
+	_r->r28 = _r->r29 = _r->r30 = _r->r31 =		\
+	0;						\
+} while (0)
+
+
+#endif /* __uClinux__ */
+
+#endif /* _UAPI_ASM_MICROBLAZE_ELF_H */

linux-7.2.3/arch/microblaze/include/uapi/asm/posix_types.h

@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_MICROBLAZE_POSIX_TYPES_H
+#define _ASM_MICROBLAZE_POSIX_TYPES_H
+
+typedef unsigned short	__kernel_mode_t;
+#define __kernel_mode_t __kernel_mode_t
+
+#include <asm-generic/posix_types.h>
+
+#endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */

linux-7.2.3/arch/microblaze/include/uapi/asm/ptrace.h

@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _UAPI_ASM_MICROBLAZE_PTRACE_H
+#define _UAPI_ASM_MICROBLAZE_PTRACE_H
+
+#ifndef __ASSEMBLER__
+
+typedef unsigned long microblaze_reg_t;
+
+struct pt_regs {
+	microblaze_reg_t r0;
+	microblaze_reg_t r1;
+	microblaze_reg_t r2;
+	microblaze_reg_t r3;
+	microblaze_reg_t r4;
+	microblaze_reg_t r5;
+	microblaze_reg_t r6;
+	microblaze_reg_t r7;
+	microblaze_reg_t r8;
+	microblaze_reg_t r9;
+	microblaze_reg_t r10;
+	microblaze_reg_t r11;
+	microblaze_reg_t r12;
+	microblaze_reg_t r13;
+	microblaze_reg_t r14;
+	microblaze_reg_t r15;
+	microblaze_reg_t r16;
+	microblaze_reg_t r17;
+	microblaze_reg_t r18;
+	microblaze_reg_t r19;
+	microblaze_reg_t r20;
+	microblaze_reg_t r21;
+	microblaze_reg_t r22;
+	microblaze_reg_t r23;
+	microblaze_reg_t r24;
+	microblaze_reg_t r25;
+	microblaze_reg_t r26;
+	microblaze_reg_t r27;
+	microblaze_reg_t r28;
+	microblaze_reg_t r29;
+	microblaze_reg_t r30;
+	microblaze_reg_t r31;
+	microblaze_reg_t pc;
+	microblaze_reg_t msr;
+	microblaze_reg_t ear;
+	microblaze_reg_t esr;
+	microblaze_reg_t fsr;
+	int pt_mode;
+};
+
+#ifndef __KERNEL__
+
+/* pt_regs offsets used by gdbserver etc in ptrace syscalls */
+#define PT_GPR(n)	((n) * sizeof(microblaze_reg_t))
+#define PT_PC		(32 * sizeof(microblaze_reg_t))
+#define PT_MSR		(33 * sizeof(microblaze_reg_t))
+#define PT_EAR		(34 * sizeof(microblaze_reg_t))
+#define PT_ESR		(35 * sizeof(microblaze_reg_t))
+#define PT_FSR		(36 * sizeof(microblaze_reg_t))
+#define PT_KERNEL_MODE	(37 * sizeof(microblaze_reg_t))
+
+#endif /* __KERNEL */
+
+#endif /* __ASSEMBLER__ */
+
+#endif /* _UAPI_ASM_MICROBLAZE_PTRACE_H */

linux-7.2.3/arch/microblaze/include/uapi/asm/setup.h

@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _UAPI_ASM_MICROBLAZE_SETUP_H
+#define _UAPI_ASM_MICROBLAZE_SETUP_H
+
+#define COMMAND_LINE_SIZE	256
+
+#endif /* _UAPI_ASM_MICROBLAZE_SETUP_H */

linux-7.2.3/arch/microblaze/include/uapi/asm/sigcontext.h

@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SIGCONTEXT_H
+#define _ASM_MICROBLAZE_SIGCONTEXT_H
+
+/* FIXME should be linux/ptrace.h */
+#include <asm/ptrace.h>
+
+struct sigcontext {
+	struct pt_regs regs;
+	unsigned long oldmask;
+};
+
+#endif /* _ASM_MICROBLAZE_SIGCONTEXT_H */

linux-7.2.3/arch/microblaze/include/uapi/asm/unistd.h

@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _UAPI_ASM_MICROBLAZE_UNISTD_H
+#define _UAPI_ASM_MICROBLAZE_UNISTD_H
+
+#include <asm/unistd_32.h>
+
+#endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */

linux-7.2.3/arch/microblaze/kernel/.gitignore

@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+vmlinux.lds

linux-7.2.3/arch/microblaze/kernel/Makefile

@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile
+#
+
+ifdef CONFIG_FUNCTION_TRACER
+# Do not trace early boot code and low level code
+CFLAGS_REMOVE_timer.o = -pg
+CFLAGS_REMOVE_intc.o = -pg
+CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_process.o = -pg
+endif
+
+always-$(KBUILD_BUILTIN) := vmlinux.lds
+
+obj-y += head.o dma.o exceptions.o \
+	hw_exception_handler.o irq.o \
+	process.o prom.o ptrace.o \
+	reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o
+
+obj-y += cpu/
+
+obj-$(CONFIG_MODULES)		+= microblaze_ksyms.o module.o
+obj-y				+= misc.o
+obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
+obj-$(CONFIG_FUNCTION_TRACER)	+= ftrace.o mcount.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
+
+obj-y	+= entry.o

linux-7.2.3/arch/microblaze/kernel/asm-offsets.c

@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define COMPILE_OFFSETS
+
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <linux/thread_info.h>
+#include <linux/kbuild.h>
+#include <asm/cpuinfo.h>
+
+int main(int argc, char *argv[])
+{
+	/* struct pt_regs */
+	DEFINE(PT_SIZE, sizeof(struct pt_regs));
+	DEFINE(PT_MSR, offsetof(struct pt_regs, msr));
+	DEFINE(PT_EAR, offsetof(struct pt_regs, ear));
+	DEFINE(PT_ESR, offsetof(struct pt_regs, esr));
+	DEFINE(PT_FSR, offsetof(struct pt_regs, fsr));
+	DEFINE(PT_PC, offsetof(struct pt_regs, pc));
+	DEFINE(PT_R0, offsetof(struct pt_regs, r0));
+	DEFINE(PT_R1, offsetof(struct pt_regs, r1));
+	DEFINE(PT_R2, offsetof(struct pt_regs, r2));
+	DEFINE(PT_R3, offsetof(struct pt_regs, r3));
+	DEFINE(PT_R4, offsetof(struct pt_regs, r4));
+	DEFINE(PT_R5, offsetof(struct pt_regs, r5));
+	DEFINE(PT_R6, offsetof(struct pt_regs, r6));
+	DEFINE(PT_R7, offsetof(struct pt_regs, r7));
+	DEFINE(PT_R8, offsetof(struct pt_regs, r8));
+	DEFINE(PT_R9, offsetof(struct pt_regs, r9));
+	DEFINE(PT_R10, offsetof(struct pt_regs, r10));
+	DEFINE(PT_R11, offsetof(struct pt_regs, r11));
+	DEFINE(PT_R12, offsetof(struct pt_regs, r12));
+	DEFINE(PT_R13, offsetof(struct pt_regs, r13));
+	DEFINE(PT_R14, offsetof(struct pt_regs, r14));
+	DEFINE(PT_R15, offsetof(struct pt_regs, r15));
+	DEFINE(PT_R16, offsetof(struct pt_regs, r16));
+	DEFINE(PT_R17, offsetof(struct pt_regs, r17));
+	DEFINE(PT_R18, offsetof(struct pt_regs, r18));
+	DEFINE(PT_R19, offsetof(struct pt_regs, r19));
+	DEFINE(PT_R20, offsetof(struct pt_regs, r20));
+	DEFINE(PT_R21, offsetof(struct pt_regs, r21));
+	DEFINE(PT_R22, offsetof(struct pt_regs, r22));
+	DEFINE(PT_R23, offsetof(struct pt_regs, r23));
+	DEFINE(PT_R24, offsetof(struct pt_regs, r24));
+	DEFINE(PT_R25, offsetof(struct pt_regs, r25));
+	DEFINE(PT_R26, offsetof(struct pt_regs, r26));
+	DEFINE(PT_R27, offsetof(struct pt_regs, r27));
+	DEFINE(PT_R28, offsetof(struct pt_regs, r28));
+	DEFINE(PT_R29, offsetof(struct pt_regs, r29));
+	DEFINE(PT_R30, offsetof(struct pt_regs, r30));
+	DEFINE(PT_R31, offsetof(struct pt_regs, r31));
+	DEFINE(PT_MODE, offsetof(struct pt_regs, pt_mode));
+	BLANK();
+
+	/* Magic offsets for PTRACE PEEK/POKE etc */
+	DEFINE(PT_TEXT_ADDR, sizeof(struct pt_regs) + 1);
+	DEFINE(PT_TEXT_LEN, sizeof(struct pt_regs) + 2);
+	DEFINE(PT_DATA_ADDR, sizeof(struct pt_regs) + 3);
+	BLANK();
+
+	/* struct task_struct */
+	DEFINE(TS_THREAD_INFO, offsetof(struct task_struct, stack));
+	DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+	DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+	DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
+	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+	DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+	DEFINE(TASK_PID, offsetof(struct task_struct, pid));
+	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
+	BLANK();
+
+	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
+	BLANK();
+
+	/* struct thread_info */
+	DEFINE(TI_TASK, offsetof(struct thread_info, task));
+	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+	DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context));
+	DEFINE(TI_PREEMPT_COUNT, offsetof(struct thread_info, preempt_count));
+	BLANK();
+
+	/* struct cpu_context */
+	DEFINE(CC_R1, offsetof(struct cpu_context, r1)); /* r1 */
+	DEFINE(CC_R2, offsetof(struct cpu_context, r2));
+	/* dedicated registers */
+	DEFINE(CC_R13, offsetof(struct cpu_context, r13));
+	DEFINE(CC_R14, offsetof(struct cpu_context, r14));
+	DEFINE(CC_R15, offsetof(struct cpu_context, r15));
+	DEFINE(CC_R16, offsetof(struct cpu_context, r16));
+	DEFINE(CC_R17, offsetof(struct cpu_context, r17));
+	DEFINE(CC_R18, offsetof(struct cpu_context, r18));
+	/* non-volatile registers */
+	DEFINE(CC_R19, offsetof(struct cpu_context, r19));
+	DEFINE(CC_R20, offsetof(struct cpu_context, r20));
+	DEFINE(CC_R21, offsetof(struct cpu_context, r21));
+	DEFINE(CC_R22, offsetof(struct cpu_context, r22));
+	DEFINE(CC_R23, offsetof(struct cpu_context, r23));
+	DEFINE(CC_R24, offsetof(struct cpu_context, r24));
+	DEFINE(CC_R25, offsetof(struct cpu_context, r25));
+	DEFINE(CC_R26, offsetof(struct cpu_context, r26));
+	DEFINE(CC_R27, offsetof(struct cpu_context, r27));
+	DEFINE(CC_R28, offsetof(struct cpu_context, r28));
+	DEFINE(CC_R29, offsetof(struct cpu_context, r29));
+	DEFINE(CC_R30, offsetof(struct cpu_context, r30));
+	/* special purpose registers */
+	DEFINE(CC_MSR, offsetof(struct cpu_context, msr));
+	DEFINE(CC_EAR, offsetof(struct cpu_context, ear));
+	DEFINE(CC_ESR, offsetof(struct cpu_context, esr));
+	DEFINE(CC_FSR, offsetof(struct cpu_context, fsr));
+	BLANK();
+
+	/* struct cpuinfo */
+	DEFINE(CI_DCS, offsetof(struct cpuinfo, dcache_size));
+	DEFINE(CI_DCL, offsetof(struct cpuinfo, dcache_line_length));
+	DEFINE(CI_ICS, offsetof(struct cpuinfo, icache_size));
+	DEFINE(CI_ICL, offsetof(struct cpuinfo, icache_line_length));
+	BLANK();
+
+	return 0;
+}

linux-7.2.3/arch/microblaze/kernel/cpu/Makefile

@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Build the appropriate CPU version support
+#
+
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_cache.o = -pg
+endif
+
+ccflags-y := -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \
+		-DCPU_REV=$(CPU_REV)
+
+obj-y += cache.o cpuinfo.o cpuinfo-pvr-full.o cpuinfo-static.o mb.o pvr.o

linux-7.2.3/arch/microblaze/kernel/cpu/cache.c

@@ -0,0 +1,656 @@
+/*
+ * Cache control for MicroBlaze cache memories
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007-2009 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <asm/cacheflush.h>
+#include <linux/cache.h>
+#include <asm/cpuinfo.h>
+#include <asm/pvr.h>
+
+static inline void __enable_icache_msr(void)
+{
+	__asm__ __volatile__ ("	 msrset	r0, %0;"	\
+				"nop;"			\
+			: : "i" (MSR_ICE) : "memory");
+}
+
+static inline void __disable_icache_msr(void)
+{
+	__asm__ __volatile__ ("	 msrclr	r0, %0;"	\
+				"nop;"			\
+			: : "i" (MSR_ICE) : "memory");
+}
+
+static inline void __enable_dcache_msr(void)
+{
+	__asm__ __volatile__ ("	 msrset	r0, %0;"	\
+				"nop;"			\
+			: : "i" (MSR_DCE) : "memory");
+}
+
+static inline void __disable_dcache_msr(void)
+{
+	__asm__ __volatile__ ("	 msrclr	r0, %0;"	\
+				"nop; "			\
+			: : "i" (MSR_DCE) : "memory");
+}
+
+static inline void __enable_icache_nomsr(void)
+{
+	__asm__ __volatile__ ("	 mfs	r12, rmsr;"	\
+				"nop;"			\
+				"ori	r12, r12, %0;"	\
+				"mts	rmsr, r12;"	\
+				"nop;"			\
+			: : "i" (MSR_ICE) : "memory", "r12");
+}
+
+static inline void __disable_icache_nomsr(void)
+{
+	__asm__ __volatile__ ("	 mfs	r12, rmsr;"	\
+				"nop;"			\
+				"andi	r12, r12, ~%0;"	\
+				"mts	rmsr, r12;"	\
+				"nop;"			\
+			: : "i" (MSR_ICE) : "memory", "r12");
+}
+
+static inline void __enable_dcache_nomsr(void)
+{
+	__asm__ __volatile__ ("	 mfs	r12, rmsr;"	\
+				"nop;"			\
+				"ori	r12, r12, %0;"	\
+				"mts	rmsr, r12;"	\
+				"nop;"			\
+			: : "i" (MSR_DCE) : "memory", "r12");
+}
+
+static inline void __disable_dcache_nomsr(void)
+{
+	__asm__ __volatile__ ("	 mfs	r12, rmsr;"	\
+				"nop;"			\
+				"andi	r12, r12, ~%0;"	\
+				"mts	rmsr, r12;"	\
+				"nop;"			\
+			: : "i" (MSR_DCE) : "memory", "r12");
+}
+
+
+/* Helper macro for computing the limits of cache range loops
+ *
+ * End address can be unaligned which is OK for C implementation.
+ * ASM implementation align it in ASM macros
+ */
+#define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size)	\
+do {									\
+	int align = ~(cache_line_length - 1);				\
+	if (start <  UINT_MAX - cache_size)				\
+		end = min(start + cache_size, end);			\
+	start &= align;							\
+} while (0)
+
+/*
+ * Helper macro to loop over the specified cache_size/line_length and
+ * execute 'op' on that cacheline
+ */
+#define CACHE_ALL_LOOP(cache_size, line_length, op)			\
+do {									\
+	unsigned int len = cache_size - line_length;			\
+	int step = -line_length;					\
+	WARN_ON(step >= 0);						\
+									\
+	__asm__ __volatile__ (" 1:      " #op " %0, r0;"		\
+					"bgtid   %0, 1b;"		\
+					"addk    %0, %0, %1;"		\
+					: : "r" (len), "r" (step)	\
+					: "memory");			\
+} while (0)
+
+/* Used for wdc.flush/clear which can use rB for offset which is not possible
+ * to use for simple wdc or wic.
+ *
+ * start address is cache aligned
+ * end address is not aligned, if end is aligned then I have to subtract
+ * cacheline length because I can't flush/invalidate the next cacheline.
+ * If is not, I align it because I will flush/invalidate whole line.
+ */
+#define CACHE_RANGE_LOOP_2(start, end, line_length, op)			\
+do {									\
+	int step = -line_length;					\
+	int align = ~(line_length - 1);					\
+	int count;							\
+	end = ((end & align) == end) ? end - line_length : end & align;	\
+	count = end - start;						\
+	WARN_ON(count < 0);						\
+									\
+	__asm__ __volatile__ (" 1:	" #op "	%0, %1;"		\
+					"bgtid	%1, 1b;"		\
+					"addk	%1, %1, %2;"		\
+					: : "r" (start), "r" (count),	\
+					"r" (step) : "memory");		\
+} while (0)
+
+/* It is used only first parameter for OP - for wic, wdc */
+#define CACHE_RANGE_LOOP_1(start, end, line_length, op)			\
+do {									\
+	unsigned int volatile temp = 0;						\
+	unsigned int align = ~(line_length - 1);					\
+	end = ((end & align) == end) ? end - line_length : end & align;	\
+	WARN_ON(end < start);					\
+									\
+	__asm__ __volatile__ (" 1:	" #op "	%1, r0;"		\
+					"cmpu	%0, %1, %2;"		\
+					"bgtid	%0, 1b;"		\
+					"addk	%1, %1, %3;"		\
+				: : "r" (temp), "r" (start), "r" (end),	\
+					"r" (line_length) : "memory");	\
+} while (0)
+
+#define ASM_LOOP
+
+static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end)
+{
+	unsigned long flags;
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.icache_line_length, cpuinfo.icache_size);
+
+	local_irq_save(flags);
+	__disable_icache_msr();
+
+#ifdef ASM_LOOP
+	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wic	%0, r0;"	\
+				: : "r" (i));
+#endif
+	__enable_icache_msr();
+	local_irq_restore(flags);
+}
+
+static void __flush_icache_range_nomsr_irq(unsigned long start,
+				unsigned long end)
+{
+	unsigned long flags;
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.icache_line_length, cpuinfo.icache_size);
+
+	local_irq_save(flags);
+	__disable_icache_nomsr();
+
+#ifdef ASM_LOOP
+	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wic	%0, r0;"	\
+				: : "r" (i));
+#endif
+
+	__enable_icache_nomsr();
+	local_irq_restore(flags);
+}
+
+static void __flush_icache_range_noirq(unsigned long start,
+				unsigned long end)
+{
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.icache_line_length, cpuinfo.icache_size);
+#ifdef ASM_LOOP
+	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wic	%0, r0;"	\
+				: : "r" (i));
+#endif
+}
+
+static void __flush_icache_all_msr_irq(void)
+{
+	unsigned long flags;
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s\n", __func__);
+
+	local_irq_save(flags);
+	__disable_icache_msr();
+#ifdef ASM_LOOP
+	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
+#else
+	for (i = 0; i < cpuinfo.icache_size;
+		 i += cpuinfo.icache_line_length)
+			__asm__ __volatile__ ("wic	%0, r0;" \
+					: : "r" (i));
+#endif
+	__enable_icache_msr();
+	local_irq_restore(flags);
+}
+
+static void __flush_icache_all_nomsr_irq(void)
+{
+	unsigned long flags;
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s\n", __func__);
+
+	local_irq_save(flags);
+	__disable_icache_nomsr();
+#ifdef ASM_LOOP
+	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
+#else
+	for (i = 0; i < cpuinfo.icache_size;
+		 i += cpuinfo.icache_line_length)
+			__asm__ __volatile__ ("wic	%0, r0;" \
+					: : "r" (i));
+#endif
+	__enable_icache_nomsr();
+	local_irq_restore(flags);
+}
+
+static void __flush_icache_all_noirq(void)
+{
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
+	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
+#else
+	for (i = 0; i < cpuinfo.icache_size;
+		 i += cpuinfo.icache_line_length)
+			__asm__ __volatile__ ("wic	%0, r0;" \
+					: : "r" (i));
+#endif
+}
+
+static void __invalidate_dcache_all_msr_irq(void)
+{
+	unsigned long flags;
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s\n", __func__);
+
+	local_irq_save(flags);
+	__disable_dcache_msr();
+#ifdef ASM_LOOP
+	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc	%0, r0;" \
+					: : "r" (i));
+#endif
+	__enable_dcache_msr();
+	local_irq_restore(flags);
+}
+
+static void __invalidate_dcache_all_nomsr_irq(void)
+{
+	unsigned long flags;
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s\n", __func__);
+
+	local_irq_save(flags);
+	__disable_dcache_nomsr();
+#ifdef ASM_LOOP
+	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc	%0, r0;" \
+					: : "r" (i));
+#endif
+	__enable_dcache_nomsr();
+	local_irq_restore(flags);
+}
+
+static void __invalidate_dcache_all_noirq_wt(void)
+{
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
+	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc	%0, r0;" \
+					: : "r" (i));
+#endif
+}
+
+/*
+ * FIXME It is blindly invalidation as is expected
+ * but can't be called on noMMU in microblaze_cache_init below
+ *
+ * MS: noMMU kernel won't boot if simple wdc is used
+ * The reason should be that there are discared data which kernel needs
+ */
+static void __invalidate_dcache_all_wb(void)
+{
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
+	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
+					wdc);
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc	%0, r0;" \
+					: : "r" (i));
+#endif
+}
+
+static void __invalidate_dcache_range_wb(unsigned long start,
+						unsigned long end)
+{
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+#ifdef ASM_LOOP
+	CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.clear);
+#else
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
+		__asm__ __volatile__ ("wdc.clear	%0, r0;"	\
+				: : "r" (i));
+#endif
+}
+
+static void __invalidate_dcache_range_nomsr_wt(unsigned long start,
+							unsigned long end)
+{
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+
+#ifdef ASM_LOOP
+	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
+		__asm__ __volatile__ ("wdc	%0, r0;"	\
+				: : "r" (i));
+#endif
+}
+
+static void __invalidate_dcache_range_msr_irq_wt(unsigned long start,
+							unsigned long end)
+{
+	unsigned long flags;
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+
+	local_irq_save(flags);
+	__disable_dcache_msr();
+
+#ifdef ASM_LOOP
+	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
+		__asm__ __volatile__ ("wdc	%0, r0;"	\
+				: : "r" (i));
+#endif
+
+	__enable_dcache_msr();
+	local_irq_restore(flags);
+}
+
+static void __invalidate_dcache_range_nomsr_irq(unsigned long start,
+							unsigned long end)
+{
+	unsigned long flags;
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+
+	local_irq_save(flags);
+	__disable_dcache_nomsr();
+
+#ifdef ASM_LOOP
+	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
+		__asm__ __volatile__ ("wdc	%0, r0;"	\
+				: : "r" (i));
+#endif
+
+	__enable_dcache_nomsr();
+	local_irq_restore(flags);
+}
+
+static void __flush_dcache_all_wb(void)
+{
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
+	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
+				wdc.flush);
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc.flush	%0, r0;" \
+					: : "r" (i));
+#endif
+}
+
+static void __flush_dcache_range_wb(unsigned long start, unsigned long end)
+{
+#ifndef ASM_LOOP
+	int i;
+#endif
+	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
+				(unsigned int)start, (unsigned int) end);
+
+	CACHE_LOOP_LIMITS(start, end,
+			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+#ifdef ASM_LOOP
+	CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.flush);
+#else
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
+		__asm__ __volatile__ ("wdc.flush	%0, r0;"	\
+				: : "r" (i));
+#endif
+}
+
+/* struct for wb caches and for wt caches */
+struct scache *mbc;
+
+/* new wb cache model */
+static const struct scache wb_msr = {
+	.ie = __enable_icache_msr,
+	.id = __disable_icache_msr,
+	.ifl = __flush_icache_all_noirq,
+	.iflr = __flush_icache_range_noirq,
+	.iin = __flush_icache_all_noirq,
+	.iinr = __flush_icache_range_noirq,
+	.de = __enable_dcache_msr,
+	.dd = __disable_dcache_msr,
+	.dfl = __flush_dcache_all_wb,
+	.dflr = __flush_dcache_range_wb,
+	.din = __invalidate_dcache_all_wb,
+	.dinr = __invalidate_dcache_range_wb,
+};
+
+/* There is only difference in ie, id, de, dd functions */
+static const struct scache wb_nomsr = {
+	.ie = __enable_icache_nomsr,
+	.id = __disable_icache_nomsr,
+	.ifl = __flush_icache_all_noirq,
+	.iflr = __flush_icache_range_noirq,
+	.iin = __flush_icache_all_noirq,
+	.iinr = __flush_icache_range_noirq,
+	.de = __enable_dcache_nomsr,
+	.dd = __disable_dcache_nomsr,
+	.dfl = __flush_dcache_all_wb,
+	.dflr = __flush_dcache_range_wb,
+	.din = __invalidate_dcache_all_wb,
+	.dinr = __invalidate_dcache_range_wb,
+};
+
+/* Old wt cache model with disabling irq and turn off cache */
+static const struct scache wt_msr = {
+	.ie = __enable_icache_msr,
+	.id = __disable_icache_msr,
+	.ifl = __flush_icache_all_msr_irq,
+	.iflr = __flush_icache_range_msr_irq,
+	.iin = __flush_icache_all_msr_irq,
+	.iinr = __flush_icache_range_msr_irq,
+	.de = __enable_dcache_msr,
+	.dd = __disable_dcache_msr,
+	.dfl = __invalidate_dcache_all_msr_irq,
+	.dflr = __invalidate_dcache_range_msr_irq_wt,
+	.din = __invalidate_dcache_all_msr_irq,
+	.dinr = __invalidate_dcache_range_msr_irq_wt,
+};
+
+static const struct scache wt_nomsr = {
+	.ie = __enable_icache_nomsr,
+	.id = __disable_icache_nomsr,
+	.ifl = __flush_icache_all_nomsr_irq,
+	.iflr = __flush_icache_range_nomsr_irq,
+	.iin = __flush_icache_all_nomsr_irq,
+	.iinr = __flush_icache_range_nomsr_irq,
+	.de = __enable_dcache_nomsr,
+	.dd = __disable_dcache_nomsr,
+	.dfl = __invalidate_dcache_all_nomsr_irq,
+	.dflr = __invalidate_dcache_range_nomsr_irq,
+	.din = __invalidate_dcache_all_nomsr_irq,
+	.dinr = __invalidate_dcache_range_nomsr_irq,
+};
+
+/* New wt cache model for newer Microblaze versions */
+static const struct scache wt_msr_noirq = {
+	.ie = __enable_icache_msr,
+	.id = __disable_icache_msr,
+	.ifl = __flush_icache_all_noirq,
+	.iflr = __flush_icache_range_noirq,
+	.iin = __flush_icache_all_noirq,
+	.iinr = __flush_icache_range_noirq,
+	.de = __enable_dcache_msr,
+	.dd = __disable_dcache_msr,
+	.dfl = __invalidate_dcache_all_noirq_wt,
+	.dflr = __invalidate_dcache_range_nomsr_wt,
+	.din = __invalidate_dcache_all_noirq_wt,
+	.dinr = __invalidate_dcache_range_nomsr_wt,
+};
+
+static const struct scache wt_nomsr_noirq = {
+	.ie = __enable_icache_nomsr,
+	.id = __disable_icache_nomsr,
+	.ifl = __flush_icache_all_noirq,
+	.iflr = __flush_icache_range_noirq,
+	.iin = __flush_icache_all_noirq,
+	.iinr = __flush_icache_range_noirq,
+	.de = __enable_dcache_nomsr,
+	.dd = __disable_dcache_nomsr,
+	.dfl = __invalidate_dcache_all_noirq_wt,
+	.dflr = __invalidate_dcache_range_nomsr_wt,
+	.din = __invalidate_dcache_all_noirq_wt,
+	.dinr = __invalidate_dcache_range_nomsr_wt,
+};
+
+/* CPU version code for 7.20.c - see arch/microblaze/kernel/cpu/cpuinfo.c */
+#define CPUVER_7_20_A	0x0c
+#define CPUVER_7_20_D	0x0f
+
+void microblaze_cache_init(void)
+{
+	if (cpuinfo.use_instr & PVR2_USE_MSR_INSTR) {
+		if (cpuinfo.dcache_wb) {
+			pr_info("wb_msr\n");
+			mbc = (struct scache *)&wb_msr;
+			if (cpuinfo.ver_code <= CPUVER_7_20_D) {
+				/* MS: problem with signal handling - hw bug */
+				pr_info("WB won't work properly\n");
+			}
+		} else {
+			if (cpuinfo.ver_code >= CPUVER_7_20_A) {
+				pr_info("wt_msr_noirq\n");
+				mbc = (struct scache *)&wt_msr_noirq;
+			} else {
+				pr_info("wt_msr\n");
+				mbc = (struct scache *)&wt_msr;
+			}
+		}
+	} else {
+		if (cpuinfo.dcache_wb) {
+			pr_info("wb_nomsr\n");
+			mbc = (struct scache *)&wb_nomsr;
+			if (cpuinfo.ver_code <= CPUVER_7_20_D) {
+				/* MS: problem with signal handling - hw bug */
+				pr_info("WB won't work properly\n");
+			}
+		} else {
+			if (cpuinfo.ver_code >= CPUVER_7_20_A) {
+				pr_info("wt_nomsr_noirq\n");
+				mbc = (struct scache *)&wt_nomsr_noirq;
+			} else {
+				pr_info("wt_nomsr\n");
+				mbc = (struct scache *)&wt_nomsr;
+			}
+		}
+	}
+	/*
+	 * FIXME Invalidation is done in U-BOOT
+	 * WT cache: Data is already written to main memory
+	 * WB cache: Discard data on noMMU which caused that kernel doesn't boot
+	 */
+	/* invalidate_dcache(); */
+	enable_dcache();
+
+	invalidate_icache();
+	enable_icache();
+}

linux-7.2.3/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c

@@ -0,0 +1,110 @@
+/*
+ * Support for MicroBlaze PVR (processor version register)
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/pvr.h>
+#include <asm/cpuinfo.h>
+
+/*
+ * Helper macro to map between fields in our struct cpuinfo, and
+ * the PVR macros in pvr.h.
+ */
+
+#define CI(c, p) { ci->c = PVR_##p(pvr); }
+
+#define err_printk(x) \
+	pr_err("ERROR: Microblaze " x "-different for PVR and DTS\n");
+
+void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
+{
+	struct pvr_s pvr;
+	u32 temp; /* for saving temp value */
+	get_pvr(&pvr);
+
+	CI(ver_code, VERSION);
+	if (!ci->ver_code) {
+		pr_err("ERROR: MB has broken PVR regs -> use DTS setting\n");
+		return;
+	}
+
+	temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |
+		PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr);
+	if (ci->use_instr != temp)
+		err_printk("BARREL, MSR, PCMP or DIV");
+	ci->use_instr = temp;
+
+	temp = PVR_USE_HW_MUL(pvr) | PVR_USE_MUL64(pvr);
+	if (ci->use_mult != temp)
+		err_printk("HW_MUL");
+	ci->use_mult = temp;
+
+	temp = PVR_USE_FPU(pvr) | PVR_USE_FPU2(pvr);
+	if (ci->use_fpu != temp)
+		err_printk("HW_FPU");
+	ci->use_fpu = temp;
+
+	ci->use_exc = PVR_OPCODE_0x0_ILLEGAL(pvr) |
+			PVR_UNALIGNED_EXCEPTION(pvr) |
+			PVR_ILL_OPCODE_EXCEPTION(pvr) |
+			PVR_IOPB_BUS_EXCEPTION(pvr) |
+			PVR_DOPB_BUS_EXCEPTION(pvr) |
+			PVR_DIV_ZERO_EXCEPTION(pvr) |
+			PVR_FPU_EXCEPTION(pvr) |
+			PVR_FSL_EXCEPTION(pvr);
+
+	CI(pvr_user1, USER1);
+	CI(pvr_user2, USER2);
+
+	CI(mmu, USE_MMU);
+	CI(mmu_privins, MMU_PRIVINS);
+	CI(endian, ENDIAN);
+
+	CI(use_icache, USE_ICACHE);
+	CI(icache_tagbits, ICACHE_ADDR_TAG_BITS);
+	CI(icache_write, ICACHE_ALLOW_WR);
+	ci->icache_line_length = PVR_ICACHE_LINE_LEN(pvr) << 2;
+	CI(icache_size, ICACHE_BYTE_SIZE);
+	CI(icache_base, ICACHE_BASEADDR);
+	CI(icache_high, ICACHE_HIGHADDR);
+
+	CI(use_dcache, USE_DCACHE);
+	CI(dcache_tagbits, DCACHE_ADDR_TAG_BITS);
+	CI(dcache_write, DCACHE_ALLOW_WR);
+	ci->dcache_line_length = PVR_DCACHE_LINE_LEN(pvr) << 2;
+	CI(dcache_size, DCACHE_BYTE_SIZE);
+	CI(dcache_base, DCACHE_BASEADDR);
+	CI(dcache_high, DCACHE_HIGHADDR);
+
+	temp = PVR_DCACHE_USE_WRITEBACK(pvr);
+	if (ci->dcache_wb != temp)
+		err_printk("DCACHE WB");
+	ci->dcache_wb = temp;
+
+	CI(use_dopb, D_OPB);
+	CI(use_iopb, I_OPB);
+	CI(use_dlmb, D_LMB);
+	CI(use_ilmb, I_LMB);
+	CI(num_fsl, FSL_LINKS);
+
+	CI(irq_edge, INTERRUPT_IS_EDGE);
+	CI(irq_positive, EDGE_IS_POSITIVE);
+
+	CI(area_optimised, AREA_OPTIMISED);
+
+	CI(hw_debug, DEBUG_ENABLED);
+	CI(num_pc_brk, NUMBER_OF_PC_BRK);
+	CI(num_rd_brk, NUMBER_OF_RD_ADDR_BRK);
+	CI(num_wr_brk, NUMBER_OF_WR_ADDR_BRK);
+
+	CI(fpga_family_code, TARGET_FAMILY);
+}

linux-7.2.3/arch/microblaze/kernel/cpu/cpuinfo-static.c

@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/cpuinfo.h>
+#include <asm/pvr.h>
+
+static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
+static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
+
+#define err_printk(x) \
+	pr_err("ERROR: Microblaze " x "-different for kernel and DTS\n");
+
+void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
+{
+	u32 i = 0;
+
+	ci->use_instr =
+		(fcpu(cpu, "xlnx,use-barrel") ? PVR0_USE_BARREL_MASK : 0) |
+		(fcpu(cpu, "xlnx,use-msr-instr") ? PVR2_USE_MSR_INSTR : 0) |
+		(fcpu(cpu, "xlnx,use-pcmp-instr") ? PVR2_USE_PCMP_INSTR : 0) |
+		(fcpu(cpu, "xlnx,use-div") ? PVR0_USE_DIV_MASK : 0);
+	if (CONFIG_XILINX_MICROBLAZE0_USE_BARREL)
+		i |= PVR0_USE_BARREL_MASK;
+	if (CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR)
+		i |= PVR2_USE_MSR_INSTR;
+	if (CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR)
+		i |= PVR2_USE_PCMP_INSTR;
+	if (CONFIG_XILINX_MICROBLAZE0_USE_DIV)
+		i |= PVR0_USE_DIV_MASK;
+	if (ci->use_instr != i)
+		err_printk("BARREL, MSR, PCMP or DIV");
+
+	ci->use_mult = fcpu(cpu, "xlnx,use-hw-mul");
+	if (ci->use_mult != CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)
+		err_printk("HW_MUL");
+	ci->use_mult =
+		(ci->use_mult > 1 ?
+				(PVR2_USE_MUL64_MASK | PVR0_USE_HW_MUL_MASK) :
+				(ci->use_mult == 1 ? PVR0_USE_HW_MUL_MASK : 0));
+
+	ci->use_fpu = fcpu(cpu, "xlnx,use-fpu");
+	if (ci->use_fpu != CONFIG_XILINX_MICROBLAZE0_USE_FPU)
+		err_printk("HW_FPU");
+	ci->use_fpu = (ci->use_fpu > 1 ?
+				(PVR2_USE_FPU2_MASK | PVR0_USE_FPU_MASK) :
+				(ci->use_fpu == 1 ? PVR0_USE_FPU_MASK : 0));
+
+	ci->use_exc =
+		(fcpu(cpu, "xlnx,unaligned-exceptions") ?
+				PVR2_UNALIGNED_EXC_MASK : 0) |
+		(fcpu(cpu, "xlnx,ill-opcode-exception") ?
+				PVR2_ILL_OPCODE_EXC_MASK : 0) |
+		(fcpu(cpu, "xlnx,iopb-bus-exception") ?
+				PVR2_IOPB_BUS_EXC_MASK : 0) |
+		(fcpu(cpu, "xlnx,dopb-bus-exception") ?
+				PVR2_DOPB_BUS_EXC_MASK : 0) |
+		(fcpu(cpu, "xlnx,div-zero-exception") ?
+				PVR2_DIV_ZERO_EXC_MASK : 0) |
+		(fcpu(cpu, "xlnx,fpu-exception") ? PVR2_FPU_EXC_MASK : 0) |
+		(fcpu(cpu, "xlnx,fsl-exception") ? PVR2_USE_EXTEND_FSL : 0);
+
+	ci->use_icache = fcpu(cpu, "xlnx,use-icache");
+	ci->icache_tagbits = fcpu(cpu, "xlnx,addr-tag-bits");
+	ci->icache_write = fcpu(cpu, "xlnx,allow-icache-wr");
+	ci->icache_line_length = fcpu(cpu, "xlnx,icache-line-len") << 2;
+	if (!ci->icache_line_length) {
+		if (fcpu(cpu, "xlnx,icache-use-fsl"))
+			ci->icache_line_length = 4 << 2;
+		else
+			ci->icache_line_length = 1 << 2;
+	}
+	ci->icache_size = fcpu(cpu, "i-cache-size");
+	ci->icache_base = fcpu(cpu, "i-cache-baseaddr");
+	ci->icache_high = fcpu(cpu, "i-cache-highaddr");
+
+	ci->use_dcache = fcpu(cpu, "xlnx,use-dcache");
+	ci->dcache_tagbits = fcpu(cpu, "xlnx,dcache-addr-tag");
+	ci->dcache_write = fcpu(cpu, "xlnx,allow-dcache-wr");
+	ci->dcache_line_length = fcpu(cpu, "xlnx,dcache-line-len") << 2;
+	if (!ci->dcache_line_length) {
+		if (fcpu(cpu, "xlnx,dcache-use-fsl"))
+			ci->dcache_line_length = 4 << 2;
+		else
+			ci->dcache_line_length = 1 << 2;
+	}
+	ci->dcache_size = fcpu(cpu, "d-cache-size");
+	ci->dcache_base = fcpu(cpu, "d-cache-baseaddr");
+	ci->dcache_high = fcpu(cpu, "d-cache-highaddr");
+	ci->dcache_wb = fcpu(cpu, "xlnx,dcache-use-writeback");
+
+	ci->use_dopb = fcpu(cpu, "xlnx,d-opb");
+	ci->use_iopb = fcpu(cpu, "xlnx,i-opb");
+	ci->use_dlmb = fcpu(cpu, "xlnx,d-lmb");
+	ci->use_ilmb = fcpu(cpu, "xlnx,i-lmb");
+
+	ci->num_fsl = fcpu(cpu, "xlnx,fsl-links");
+	ci->irq_edge = fcpu(cpu, "xlnx,interrupt-is-edge");
+	ci->irq_positive = fcpu(cpu, "xlnx,edge-is-positive");
+	ci->area_optimised = 0;
+
+	ci->hw_debug = fcpu(cpu, "xlnx,debug-enabled");
+	ci->num_pc_brk = fcpu(cpu, "xlnx,number-of-pc-brk");
+	ci->num_rd_brk = fcpu(cpu, "xlnx,number-of-rd-addr-brk");
+	ci->num_wr_brk = fcpu(cpu, "xlnx,number-of-wr-addr-brk");
+
+	ci->pvr_user1 = fcpu(cpu, "xlnx,pvr-user1");
+	ci->pvr_user2 = fcpu(cpu, "xlnx,pvr-user2");
+
+	ci->mmu = fcpu(cpu, "xlnx,use-mmu");
+	ci->mmu_privins = fcpu(cpu, "xlnx,mmu-privileged-instr");
+	ci->endian = fcpu(cpu, "xlnx,endianness");
+
+	ci->ver_code = 0;
+	ci->fpga_family_code = 0;
+
+	/* Do various fixups based on CPU version and FPGA family strings */
+
+	/* Resolved the CPU version code */
+	for (i = 0; cpu_ver_lookup[i].s != NULL; i++) {
+		if (strcmp(cpu_ver_lookup[i].s, cpu_ver_string) == 0)
+			ci->ver_code = cpu_ver_lookup[i].k;
+	}
+
+	/* Resolved the fpga family code */
+	for (i = 0; family_string_lookup[i].s != NULL; i++) {
+		if (strcmp(family_string_lookup[i].s, family_string) == 0)
+			ci->fpga_family_code = family_string_lookup[i].k;
+	}
+
+	/* FIXME - mb3 and spartan2 do not exist in PVR */
+	/* This is mb3 and on a non Spartan2 */
+	if (ci->ver_code == 0x20 && ci->fpga_family_code != 0xf0)
+		/* Hardware Multiplier in use */
+		ci->use_mult = 1;
+}

linux-7.2.3/arch/microblaze/kernel/cpu/cpuinfo.c

@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <asm/cpuinfo.h>
+#include <asm/pvr.h>
+
+const struct cpu_ver_key cpu_ver_lookup[] = {
+	/* These key value are as per MBV field in PVR0 */
+	{"5.00.a", 0x01},
+	{"5.00.b", 0x02},
+	{"5.00.c", 0x03},
+	{"6.00.a", 0x04},
+	{"6.00.b", 0x06},
+	{"7.00.a", 0x05},
+	{"7.00.b", 0x07},
+	{"7.10.a", 0x08},
+	{"7.10.b", 0x09},
+	{"7.10.c", 0x0a},
+	{"7.10.d", 0x0b},
+	{"7.20.a", 0x0c},
+	{"7.20.b", 0x0d},
+	{"7.20.c", 0x0e},
+	{"7.20.d", 0x0f},
+	{"7.30.a", 0x10},
+	{"7.30.b", 0x11},
+	{"8.00.a", 0x12},
+	{"8.00.b", 0x13},
+	{"8.10.a", 0x14},
+	{"8.20.a", 0x15},
+	{"8.20.b", 0x16},
+	{"8.30.a", 0x17},
+	{"8.40.a", 0x18},
+	{"8.40.b", 0x19},
+	{"8.50.a", 0x1a},
+	{"8.50.b", 0x1c},
+	{"8.50.c", 0x1e},
+	{"9.0", 0x1b},
+	{"9.1", 0x1d},
+	{"9.2", 0x1f},
+	{"9.3", 0x20},
+	{"9.4", 0x21},
+	{"9.5", 0x22},
+	{"9.6", 0x23},
+	{"10.0", 0x24},
+	{"11.0", 0x25},
+	{NULL, 0},
+};
+
+/*
+ * FIXME Not sure if the actual key is defined by Xilinx in the PVR
+ */
+const struct family_string_key family_string_lookup[] = {
+	{"virtex2", 0x4},
+	{"virtex2pro", 0x5},
+	{"spartan3", 0x6},
+	{"virtex4", 0x7},
+	{"virtex5", 0x8},
+	{"spartan3e", 0x9},
+	{"spartan3a", 0xa},
+	{"spartan3an", 0xb},
+	{"spartan3adsp", 0xc},
+	{"spartan6", 0xd},
+	{"virtex6", 0xe},
+	{"virtex7", 0xf},
+	/* FIXME There is no key code defined for spartan2 */
+	{"spartan2", 0xf0},
+	{"kintex7", 0x10},
+	{"artix7", 0x11},
+	{"zynq7000", 0x12},
+	{"UltraScale Virtex", 0x13},
+	{"UltraScale Kintex", 0x14},
+	{"UltraScale+ Zynq", 0x15},
+	{"UltraScale+ Virtex", 0x16},
+	{"UltraScale+ Kintex", 0x17},
+	{"Spartan7", 0x18},
+	{NULL, 0},
+};
+
+struct cpuinfo cpuinfo;
+static struct device_node *cpu;
+
+void __init setup_cpuinfo(void)
+{
+	cpu = of_get_cpu_node(0, NULL);
+	if (!cpu)
+		pr_err("You don't have cpu or are missing cpu reg property!!!\n");
+
+	pr_info("%s: initialising\n", __func__);
+
+	switch (cpu_has_pvr()) {
+	case 0:
+		pr_warn("%s: No PVR support. Using static CPU info from FDT\n",
+			__func__);
+		set_cpuinfo_static(&cpuinfo, cpu);
+		break;
+/* FIXME I found weird behavior with MB 7.00.a/b 7.10.a
+ * please do not use FULL PVR with MMU */
+	case 1:
+		pr_info("%s: Using full CPU PVR support\n",
+			__func__);
+		set_cpuinfo_static(&cpuinfo, cpu);
+		set_cpuinfo_pvr_full(&cpuinfo, cpu);
+		break;
+	default:
+		pr_warn("%s: Unsupported PVR setting\n", __func__);
+		set_cpuinfo_static(&cpuinfo, cpu);
+	}
+
+	if (cpuinfo.mmu_privins)
+		pr_warn("%s: Stream instructions enabled"
+			" - USERSPACE CAN LOCK THIS KERNEL!\n", __func__);
+
+	of_node_put(cpu);
+}
+
+void __init setup_cpuinfo_clk(void)
+{
+	struct clk *clk;
+
+	clk = of_clk_get(cpu, 0);
+	if (IS_ERR(clk)) {
+		pr_err("ERROR: CPU CCF input clock not found\n");
+		/* take timebase-frequency from DTS */
+		cpuinfo.cpu_clock_freq = fcpu(cpu, "timebase-frequency");
+	} else {
+		cpuinfo.cpu_clock_freq = clk_get_rate(clk);
+	}
+
+	if (!cpuinfo.cpu_clock_freq) {
+		pr_err("ERROR: CPU clock frequency not setup\n");
+		BUG();
+	}
+}

linux-7.2.3/arch/microblaze/kernel/cpu/mb.c

@@ -0,0 +1,158 @@
+/*
+ * CPU-version specific code
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006-2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <linux/cpu.h>
+#include <linux/initrd.h>
+
+#include <linux/bug.h>
+#include <asm/cpuinfo.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <asm/page.h>
+#include <linux/param.h>
+#include <asm/pvr.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	char *fpga_family = "Unknown";
+	char *cpu_ver = "Unknown";
+	int i;
+
+	/* Denormalised to get the fpga family string */
+	for (i = 0; family_string_lookup[i].s != NULL; i++) {
+		if (cpuinfo.fpga_family_code == family_string_lookup[i].k) {
+			fpga_family = (char *)family_string_lookup[i].s;
+			break;
+		}
+	}
+
+	/* Denormalised to get the hw version string */
+	for (i = 0; cpu_ver_lookup[i].s != NULL; i++) {
+		if (cpuinfo.ver_code == cpu_ver_lookup[i].k) {
+			cpu_ver = (char *)cpu_ver_lookup[i].s;
+			break;
+		}
+	}
+
+	seq_printf(m,
+		   "CPU-Family:	MicroBlaze\n"
+		   "FPGA-Arch:	%s\n"
+		   "CPU-Ver:	%s, %s endian\n"
+		   "CPU-MHz:	%d.%02d\n"
+		   "BogoMips:	%lu.%02lu\n",
+		   fpga_family,
+		   cpu_ver,
+		   cpuinfo.endian ? "little" : "big",
+		   cpuinfo.cpu_clock_freq / 1000000,
+		   cpuinfo.cpu_clock_freq % 1000000,
+		   loops_per_jiffy / (500000 / HZ),
+		   (loops_per_jiffy / (5000 / HZ)) % 100);
+
+	seq_printf(m,
+		   "HW:\n Shift:\t\t%s\n"
+		   " MSR:\t\t%s\n"
+		   " PCMP:\t\t%s\n"
+		   " DIV:\t\t%s\n",
+		   str_yes_no(cpuinfo.use_instr & PVR0_USE_BARREL_MASK),
+		   str_yes_no(cpuinfo.use_instr & PVR2_USE_MSR_INSTR),
+		   str_yes_no(cpuinfo.use_instr & PVR2_USE_PCMP_INSTR),
+		   str_yes_no(cpuinfo.use_instr & PVR0_USE_DIV_MASK));
+
+	seq_printf(m, " MMU:\t\t%x\n", cpuinfo.mmu);
+
+	seq_printf(m,
+		   " MUL:\t\t%s\n"
+		   " FPU:\t\t%s\n",
+		   (cpuinfo.use_mult & PVR2_USE_MUL64_MASK) ? "v2" :
+		   (cpuinfo.use_mult & PVR0_USE_HW_MUL_MASK) ? "v1" : "no",
+		   (cpuinfo.use_fpu & PVR2_USE_FPU2_MASK) ? "v2" :
+		   (cpuinfo.use_fpu & PVR0_USE_FPU_MASK) ? "v1" : "no");
+
+	seq_printf(m,
+		   " Exc:\t\t%s%s%s%s%s%s%s%s\n",
+		   (cpuinfo.use_exc & PVR2_OPCODE_0x0_ILL_MASK) ? "op0x0 " : "",
+		   (cpuinfo.use_exc & PVR2_UNALIGNED_EXC_MASK) ? "unal " : "",
+		   (cpuinfo.use_exc & PVR2_ILL_OPCODE_EXC_MASK) ? "ill " : "",
+		   (cpuinfo.use_exc & PVR2_IOPB_BUS_EXC_MASK) ? "iopb " : "",
+		   (cpuinfo.use_exc & PVR2_DOPB_BUS_EXC_MASK) ? "dopb " : "",
+		   (cpuinfo.use_exc & PVR2_DIV_ZERO_EXC_MASK) ? "zero " : "",
+		   (cpuinfo.use_exc & PVR2_FPU_EXC_MASK) ? "fpu " : "",
+		   (cpuinfo.use_exc & PVR2_USE_FSL_EXC) ? "fsl " : "");
+
+	seq_printf(m,
+		   "Stream-insns:\t%sprivileged\n",
+		   cpuinfo.mmu_privins ? "un" : "");
+
+	if (cpuinfo.use_icache)
+		seq_printf(m,
+			   "Icache:\t\t%ukB\tline length:\t%dB\n",
+			   cpuinfo.icache_size >> 10,
+			   cpuinfo.icache_line_length);
+	else
+		seq_puts(m, "Icache:\t\tno\n");
+
+	if (cpuinfo.use_dcache) {
+		seq_printf(m,
+			   "Dcache:\t\t%ukB\tline length:\t%dB\n",
+			   cpuinfo.dcache_size >> 10,
+			   cpuinfo.dcache_line_length);
+		seq_puts(m, "Dcache-Policy:\t");
+		if (cpuinfo.dcache_wb)
+			seq_puts(m, "write-back\n");
+		else
+			seq_puts(m, "write-through\n");
+	} else {
+		seq_puts(m, "Dcache:\t\tno\n");
+	}
+
+	seq_printf(m,
+		   "HW-Debug:\t%s\n",
+		   str_yes_no(cpuinfo.hw_debug));
+
+	seq_printf(m,
+		   "PVR-USR1:\t%02x\n"
+		   "PVR-USR2:\t%08x\n",
+		   cpuinfo.pvr_user1,
+		   cpuinfo.pvr_user2);
+
+	seq_printf(m, "Page size:\t%lu\n", PAGE_SIZE);
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	int i = *pos;
+
+	return i < NR_CPUS ? (void *) (i + 1) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start = c_start,
+	.next = c_next,
+	.stop = c_stop,
+	.show = show_cpuinfo,
+};

linux-7.2.3/arch/microblaze/kernel/cpu/pvr.c

@@ -0,0 +1,81 @@
+/*
+ * Support for MicroBlaze PVR (processor version register)
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <asm/exceptions.h>
+#include <asm/pvr.h>
+#include <linux/irqflags.h>
+
+/*
+ * Until we get an assembler that knows about the pvr registers,
+ * this horrible cruft will have to do.
+ * That hardcoded opcode is mfs r3, rpvrNN
+ */
+
+#define get_single_pvr(pvrid, val)				\
+{								\
+	register unsigned tmp __asm__("r3");			\
+	tmp = 0x0;	/* Prevent warning about unused */	\
+	__asm__ __volatile__ (					\
+			"mfs	%0, rpvr" #pvrid ";"		\
+			: "=r" (tmp) : : "memory");		\
+	val = tmp;						\
+}
+
+/*
+ * Does the CPU support the PVR register?
+ * return value:
+ * 0: no PVR
+ * 1: simple PVR
+ * 2: full PVR
+ *
+ * This must work on all CPU versions, including those before the
+ * PVR was even an option.
+ */
+
+int cpu_has_pvr(void)
+{
+	unsigned long flags;
+	unsigned pvr0;
+
+	local_save_flags(flags);
+
+	/* PVR bit in MSR tells us if there is any support */
+	if (!(flags & PVR_MSR_BIT))
+		return 0;
+
+	get_single_pvr(0, pvr0);
+	pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0);
+
+	if (pvr0 & PVR0_PVR_FULL_MASK)
+		return 1;
+
+	/* for partial PVR use static cpuinfo */
+	return 2;
+}
+
+void get_pvr(struct pvr_s *p)
+{
+	get_single_pvr(0, p->pvr[0]);
+	get_single_pvr(1, p->pvr[1]);
+	get_single_pvr(2, p->pvr[2]);
+	get_single_pvr(3, p->pvr[3]);
+	get_single_pvr(4, p->pvr[4]);
+	get_single_pvr(5, p->pvr[5]);
+	get_single_pvr(6, p->pvr[6]);
+	get_single_pvr(7, p->pvr[7]);
+	get_single_pvr(8, p->pvr[8]);
+	get_single_pvr(9, p->pvr[9]);
+	get_single_pvr(10, p->pvr[10]);
+	get_single_pvr(11, p->pvr[11]);
+}

linux-7.2.3/arch/microblaze/kernel/dma.c

@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2009-2010 PetaLogix
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation
+ *
+ * Provide default implementations of the DMA mapping callbacks for
+ * directly mapped busses.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-map-ops.h>
+#include <linux/gfp.h>
+#include <linux/export.h>
+#include <linux/bug.h>
+#include <asm/cacheflush.h>
+
+static void __dma_sync(phys_addr_t paddr, size_t size,
+		enum dma_data_direction direction)
+{
+	switch (direction) {
+	case DMA_TO_DEVICE:
+	case DMA_BIDIRECTIONAL:
+		flush_dcache_range(paddr, paddr + size);
+		break;
+	case DMA_FROM_DEVICE:
+		invalidate_dcache_range(paddr, paddr + size);
+		break;
+	default:
+		BUG();
+	}
+}
+
+void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
+{
+	__dma_sync(paddr, size, dir);
+}
+
+void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
+{
+	__dma_sync(paddr, size, dir);
+}

linux-7.2.3/arch/microblaze/kernel/exceptions.c

@@ -0,0 +1,144 @@
+/*
+ * HW exception handling
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/kallsyms.h>
+
+#include <asm/exceptions.h>
+#include <asm/entry.h>		/* For KM CPU var */
+#include <linux/uaccess.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <asm/current.h>
+#include <asm/cacheflush.h>
+
+#define MICROBLAZE_ILL_OPCODE_EXCEPTION	0x02
+#define MICROBLAZE_IBUS_EXCEPTION	0x03
+#define MICROBLAZE_DBUS_EXCEPTION	0x04
+#define MICROBLAZE_DIV_ZERO_EXCEPTION	0x05
+#define MICROBLAZE_FPU_EXCEPTION	0x06
+#define MICROBLAZE_PRIVILEGED_EXCEPTION	0x07
+
+static DEFINE_SPINLOCK(die_lock);
+
+void die(const char *str, struct pt_regs *fp, long err)
+{
+	console_verbose();
+	spin_lock_irq(&die_lock);
+	pr_warn("Oops: %s, sig: %ld\n", str, err);
+	show_regs(fp);
+	spin_unlock_irq(&die_lock);
+	/* make_task_dead() should take care of panic'ing from an interrupt
+	 * context so we don't handle it here
+	 */
+	make_task_dead(err);
+}
+
+/* for user application debugging */
+asmlinkage void sw_exception(struct pt_regs *regs)
+{
+	_exception(SIGTRAP, regs, TRAP_BRKPT, regs->r16);
+	flush_dcache_range(regs->r16, regs->r16 + 0x4);
+	flush_icache_range(regs->r16, regs->r16 + 0x4);
+}
+
+void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
+{
+	if (kernel_mode(regs))
+		die("Exception in kernel mode", regs, signr);
+
+	force_sig_fault(signr, code, (void __user *)addr);
+}
+
+asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
+							int fsr, int addr)
+{
+	addr = regs->pc;
+
+#if 0
+	pr_warn("Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",
+			type, user_mode(regs) ? "user" : "kernel", fsr,
+			(unsigned int) regs->pc, (unsigned int) regs->esr);
+#endif
+
+	switch (type & 0x1F) {
+	case MICROBLAZE_ILL_OPCODE_EXCEPTION:
+		if (user_mode(regs)) {
+			pr_debug("Illegal opcode exception in user mode\n");
+			_exception(SIGILL, regs, ILL_ILLOPC, addr);
+			return;
+		}
+		pr_warn("Illegal opcode exception in kernel mode.\n");
+		die("opcode exception", regs, SIGBUS);
+		break;
+	case MICROBLAZE_IBUS_EXCEPTION:
+		if (user_mode(regs)) {
+			pr_debug("Instruction bus error exception in user mode\n");
+			_exception(SIGBUS, regs, BUS_ADRERR, addr);
+			return;
+		}
+		pr_warn("Instruction bus error exception in kernel mode.\n");
+		die("bus exception", regs, SIGBUS);
+		break;
+	case MICROBLAZE_DBUS_EXCEPTION:
+		if (user_mode(regs)) {
+			pr_debug("Data bus error exception in user mode\n");
+			_exception(SIGBUS, regs, BUS_ADRERR, addr);
+			return;
+		}
+		pr_warn("Data bus error exception in kernel mode.\n");
+		die("bus exception", regs, SIGBUS);
+		break;
+	case MICROBLAZE_DIV_ZERO_EXCEPTION:
+		if (user_mode(regs)) {
+			pr_debug("Divide by zero exception in user mode\n");
+			_exception(SIGFPE, regs, FPE_INTDIV, addr);
+			return;
+		}
+		pr_warn("Divide by zero exception in kernel mode.\n");
+		die("Divide by zero exception", regs, SIGBUS);
+		break;
+	case MICROBLAZE_FPU_EXCEPTION:
+		pr_debug("FPU exception\n");
+		/* IEEE FP exception */
+		/* I removed fsr variable and use code var for storing fsr */
+		if (fsr & FSR_IO)
+			fsr = FPE_FLTINV;
+		else if (fsr & FSR_OF)
+			fsr = FPE_FLTOVF;
+		else if (fsr & FSR_UF)
+			fsr = FPE_FLTUND;
+		else if (fsr & FSR_DZ)
+			fsr = FPE_FLTDIV;
+		else if (fsr & FSR_DO)
+			fsr = FPE_FLTRES;
+		_exception(SIGFPE, regs, fsr, addr);
+		break;
+	case MICROBLAZE_PRIVILEGED_EXCEPTION:
+		pr_debug("Privileged exception\n");
+		_exception(SIGILL, regs, ILL_PRVOPC, addr);
+		break;
+	default:
+	/* FIXME what to do in unexpected exception */
+		pr_warn("Unexpected exception %02x PC=%08x in %s mode\n",
+			type, (unsigned int) addr,
+			kernel_mode(regs) ? "kernel" : "user");
+	}
+	return;
+}

linux-7.2.3/arch/microblaze/kernel/ftrace.c

@@ -0,0 +1,217 @@
+/*
+ * Ftrace support for Microblaze.
+ *
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * Based on MIPS and PowerPC ftrace code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <asm/cacheflush.h>
+#include <linux/ftrace.h>
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in current thread info.
+ */
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+{
+	unsigned long old;
+	int faulted;
+	unsigned long return_hooker = (unsigned long)
+				&return_to_handler;
+
+	if (unlikely(ftrace_graph_is_dead()))
+		return;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	/*
+	 * Protect against fault, even if it shouldn't
+	 * happen. This tool is too much intrusive to
+	 * ignore such a protection.
+	 */
+	asm volatile("	1:	lwi	%0, %2, 0;"		\
+			"2:	swi	%3, %2, 0;"		\
+			"	addik	%1, r0, 0;"		\
+			"3:"					\
+			"	.section .fixup, \"ax\";"	\
+			"4:	brid	3b;"			\
+			"	addik	%1, r0, 1;"		\
+			"	.previous;"			\
+			"	.section __ex_table,\"a\";"	\
+			"	.word	1b,4b;"			\
+			"	.word	2b,4b;"			\
+			"	.previous;"			\
+			: "=&r" (old), "=r" (faulted)
+			: "r" (parent), "r" (return_hooker)
+	);
+
+	flush_dcache_range((u32)parent, (u32)parent + 4);
+	flush_icache_range((u32)parent, (u32)parent + 4);
+
+	if (unlikely(faulted)) {
+		ftrace_graph_stop();
+		WARN_ON(1);
+		return;
+	}
+
+	if (function_graph_enter(old, self_addr, 0, NULL))
+		*parent = old;
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+/* save value to addr - it is save to do it in asm */
+static int ftrace_modify_code(unsigned long addr, unsigned int value)
+{
+	int faulted = 0;
+
+	__asm__ __volatile__("	1:	swi	%2, %1, 0;"		\
+				"	addik	%0, r0, 0;"		\
+				"2:"					\
+				"	.section .fixup, \"ax\";"	\
+				"3:	brid	2b;"			\
+				"	addik	%0, r0, 1;"		\
+				"	.previous;"			\
+				"	.section __ex_table,\"a\";"	\
+				"	.word	1b,3b;"			\
+				"	.previous;"			\
+				: "=r" (faulted)
+				: "r" (addr), "r" (value)
+	);
+
+	if (unlikely(faulted))
+		return -EFAULT;
+
+	flush_dcache_range(addr, addr + 4);
+	flush_icache_range(addr, addr + 4);
+
+	return 0;
+}
+
+#define MICROBLAZE_NOP 0x80000000
+#define MICROBLAZE_BRI 0xb800000C
+
+static unsigned int recorded; /* if save was or not */
+static unsigned int imm; /* saving whole imm instruction */
+
+/* There are two approaches howto solve ftrace_make nop function - look below */
+#undef USE_FTRACE_NOP
+
+#ifdef USE_FTRACE_NOP
+static unsigned int bralid; /* saving whole bralid instruction */
+#endif
+
+int ftrace_make_nop(struct module *mod,
+			struct dyn_ftrace *rec, unsigned long addr)
+{
+	/* we have this part of code which we are working with
+	 * b000c000        imm     -16384
+	 * b9fc8e30        bralid  r15, -29136     // c0008e30 <_mcount>
+	 * 80000000        or      r0, r0, r0
+	 *
+	 * The first solution (!USE_FTRACE_NOP-could be called branch solution)
+	 * b000c000        bri	12 (0xC - jump to any other instruction)
+	 * b9fc8e30        bralid  r15, -29136     // c0008e30 <_mcount>
+	 * 80000000        or      r0, r0, r0
+	 * any other instruction
+	 *
+	 * The second solution (USE_FTRACE_NOP) - no jump just nops
+	 * 80000000        or      r0, r0, r0
+	 * 80000000        or      r0, r0, r0
+	 * 80000000        or      r0, r0, r0
+	 */
+	int ret = 0;
+
+	if (recorded == 0) {
+		recorded = 1;
+		imm = *(unsigned int *)rec->ip;
+		pr_debug("%s: imm:0x%x\n", __func__, imm);
+#ifdef USE_FTRACE_NOP
+		bralid = *(unsigned int *)(rec->ip + 4);
+		pr_debug("%s: bralid 0x%x\n", __func__, bralid);
+#endif /* USE_FTRACE_NOP */
+	}
+
+#ifdef USE_FTRACE_NOP
+	ret = ftrace_modify_code(rec->ip, MICROBLAZE_NOP);
+	ret += ftrace_modify_code(rec->ip + 4, MICROBLAZE_NOP);
+#else /* USE_FTRACE_NOP */
+	ret = ftrace_modify_code(rec->ip, MICROBLAZE_BRI);
+#endif /* USE_FTRACE_NOP */
+	return ret;
+}
+
+/* I believe that first is called ftrace_make_nop before this function */
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	int ret;
+	pr_debug("%s: addr:0x%x, rec->ip: 0x%x, imm:0x%x\n",
+		__func__, (unsigned int)addr, (unsigned int)rec->ip, imm);
+	ret = ftrace_modify_code(rec->ip, imm);
+#ifdef USE_FTRACE_NOP
+	pr_debug("%s: bralid:0x%x\n", __func__, bralid);
+	ret += ftrace_modify_code(rec->ip + 4, bralid);
+#endif /* USE_FTRACE_NOP */
+	return ret;
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	unsigned long ip = (unsigned long)(&ftrace_call);
+	unsigned int upper = (unsigned int)func;
+	unsigned int lower = (unsigned int)func;
+	int ret = 0;
+
+	/* create proper saving to ftrace_call poll */
+	upper = 0xb0000000 + (upper >> 16); /* imm func_upper */
+	lower = 0x32800000 + (lower & 0xFFFF); /* addik r20, r0, func_lower */
+
+	pr_debug("%s: func=0x%x, ip=0x%x, upper=0x%x, lower=0x%x\n",
+		__func__, (unsigned int)func, (unsigned int)ip, upper, lower);
+
+	/* save upper and lower code */
+	ret = ftrace_modify_code(ip, upper);
+	ret += ftrace_modify_code(ip + 4, lower);
+
+	/* We just need to replace the rtsd r15, 8 with NOP */
+	ret += ftrace_modify_code((unsigned long)&ftrace_caller,
+				  MICROBLAZE_NOP);
+
+	return ret;
+}
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+unsigned int old_jump; /* saving place for jump instruction */
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	unsigned int ret;
+	unsigned long ip = (unsigned long)(&ftrace_call_graph);
+
+	old_jump = *(unsigned int *)ip; /* save jump over instruction */
+	ret = ftrace_modify_code(ip, MICROBLAZE_NOP);
+
+	pr_debug("%s: Replace instruction: 0x%x\n", __func__, old_jump);
+	return ret;
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	unsigned int ret;
+	unsigned long ip = (unsigned long)(&ftrace_call_graph);
+
+	ret = ftrace_modify_code(ip, old_jump);
+
+	pr_debug("%s\n", __func__);
+	return ret;
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+#endif /* CONFIG_DYNAMIC_FTRACE */

linux-7.2.3/arch/microblaze/kernel/head.S

@@ -0,0 +1,372 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * MMU code derived from arch/ppc/kernel/head_4xx.S:
+ *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ *      Initial PowerPC version.
+ *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *      Rewritten for PReP
+ *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ *      Low-level exception handers, MMU support, and rewrite.
+ *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ *      PowerPC 8xx modifications.
+ *    Copyright (c) 1998-1999 TiVo, Inc.
+ *      PowerPC 403GCX modifications.
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *      PowerPC 403GCX/405GP modifications.
+ *    Copyright 2000 MontaVista Software Inc.
+ *	PPC405 modifications
+ *      PowerPC 403GCX/405GP modifications.
+ * 	Author: MontaVista Software, Inc.
+ *         	frank_rowand@mvista.com or source@mvista.com
+ * 	   	debbie_chu@mvista.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+#include <linux/of_fdt.h>		/* for OF_DT_HEADER */
+
+#include <asm/setup.h> /* COMMAND_LINE_SIZE */
+#include <asm/mmu.h>
+#include <asm/processor.h>
+
+.section .data
+/* The MMU requires a page aligned page directory. */
+.align 12
+.global swapper_pg_dir
+swapper_pg_dir:
+	.space	PAGE_SIZE
+
+.section .rodata
+.align 4
+endian_check:
+	.word	1
+
+	__HEAD
+ENTRY(_start)
+#if CONFIG_KERNEL_BASE_ADDR == 0
+	brai	TOPHYS(real_start)
+	.org	0x100
+real_start:
+#endif
+
+	mts	rmsr, r0
+/* Disable stack protection from bootloader */
+	mts	rslr, r0
+	addi	r8, r0, 0xFFFFFFFF
+	mts	rshr, r8
+/*
+ * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc'
+ * if the msrclr instruction is not enabled. We use this to detect
+ * if the opcode is available, by issuing msrclr and then testing the result.
+ * r8 == 0 - msr instructions are implemented
+ * r8 != 0 - msr instructions are not implemented
+ */
+	mfs	r1, rmsr
+	msrclr	r8, 0 /* clear nothing - just read msr for test */
+	cmpu	r8, r8, r1 /* r1 must contain msr reg content */
+
+/* r7 may point to an FDT, or there may be one linked in.
+   if it's in r7, we've got to save it away ASAP.
+   We ensure r7 points to a valid FDT, just in case the bootloader
+   is broken or non-existent */
+	beqi	r7, no_fdt_arg			/* NULL pointer?  don't copy */
+/* Does r7 point to a valid FDT? Load HEADER magic number */
+	/* Run time Big/Little endian platform */
+	/* Save 1 as word and load byte - 0 - BIG, 1 - LITTLE */
+	lbui	r11, r0, TOPHYS(endian_check)
+	beqid	r11, big_endian /* DO NOT break delay stop dependency */
+	lw	r11, r0, r7 /* Big endian load in delay slot */
+	lwr	r11, r0, r7 /* Little endian load */
+big_endian:
+	rsubi	r11, r11, OF_DT_HEADER	/* Check FDT header */
+	beqi	r11, _prepare_copy_fdt
+	or	r7, r0, r0		/* clear R7 when not valid DTB */
+	bnei	r11, no_fdt_arg			/* No - get out of here */
+_prepare_copy_fdt:
+	or	r11, r0, r0 /* incremment */
+	ori	r4, r0, TOPHYS(_fdt_start)
+	ori	r3, r0, (0x10000 - 4)
+_copy_fdt:
+	lw	r12, r7, r11 /* r12 = r7 + r11 */
+	sw	r12, r4, r11 /* addr[r4 + r11] = r12 */
+	addik	r11, r11, 4 /* increment counting */
+	bgtid	r3, _copy_fdt /* loop for all entries */
+	addik	r3, r3, -4 /* descrement loop */
+no_fdt_arg:
+
+#ifndef CONFIG_CMDLINE_BOOL
+/*
+ * handling command line
+ * copy command line directly to cmd_line placed in data section.
+ */
+	beqid	r5, skip	/* Skip if NULL pointer */
+	or	r11, r0, r0		/* incremment */
+	ori	r4, r0, cmd_line	/* load address of command line */
+	tophys(r4,r4)			/* convert to phys address */
+	ori	r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */
+_copy_command_line:
+	/* r2=r5+r11 - r5 contain pointer to command line */
+	lbu	r2, r5, r11
+	beqid	r2, skip		/* Skip if no data */
+	sb	r2, r4, r11		/* addr[r4+r11]= r2 */
+	addik	r11, r11, 1		/* increment counting */
+	bgtid	r3, _copy_command_line	/* loop for all entries       */
+	addik	r3, r3, -1		/* decrement loop */
+	addik	r5, r4, 0		/* add new space for command line */
+	tovirt(r5,r5)
+skip:
+#endif /* CONFIG_CMDLINE_BOOL */
+
+#ifdef NOT_COMPILE
+/* save bram context */
+	or	r11, r0, r0				/* incremment */
+	ori	r4, r0, TOPHYS(_bram_load_start)	/* save bram context */
+	ori	r3, r0, (LMB_SIZE - 4)
+_copy_bram:
+	lw	r7, r0, r11		/* r7 = r0 + r11 */
+	sw	r7, r4, r11		/* addr[r4 + r11] = r7 */
+	addik	r11, r11, 4		/* increment counting */
+	bgtid	r3, _copy_bram		/* loop for all entries */
+	addik	r3, r3, -4		/* descrement loop */
+#endif
+	/* We have to turn on the MMU right away. */
+
+	/*
+	 * Set up the initial MMU state so we can do the first level of
+	 * kernel initialization.  This maps the first 16 MBytes of memory 1:1
+	 * virtual to physical.
+	 */
+	nop
+	addik	r3, r0, MICROBLAZE_TLB_SIZE -1	/* Invalidate all TLB entries */
+_invalidate:
+	mts	rtlbx, r3
+	mts	rtlbhi, r0			/* flush: ensure V is clear   */
+	mts	rtlblo, r0
+	bgtid	r3, _invalidate		/* loop for all entries       */
+	addik	r3, r3, -1
+	/* sync */
+
+	/* Setup the kernel PID */
+	mts	rpid,r0			/* Load the kernel PID */
+	nop
+	bri	4
+
+	/*
+	 * We should still be executing code at physical address area
+	 * RAM_BASEADDR at this point. However, kernel code is at
+	 * a virtual address. So, set up a TLB mapping to cover this once
+	 * translation is enabled.
+	 */
+
+	addik	r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */
+	tophys(r4,r3)			/* Load the kernel physical address */
+
+	/* start to do TLB calculation */
+	addik	r12, r0, _end
+	rsub	r12, r3, r12
+	addik	r12, r12, CONFIG_LOWMEM_SIZE >> PTE_SHIFT /* that's the pad */
+
+	or r9, r0, r0 /* TLB0 = 0 */
+	or r10, r0, r0 /* TLB1 = 0 */
+
+	addik	r11, r12, -0x1000000
+	bgei	r11, GT16 /* size is greater than 16MB */
+	addik	r11, r12, -0x0800000
+	bgei	r11, GT8 /* size is greater than 8MB */
+	addik	r11, r12, -0x0400000
+	bgei	r11, GT4 /* size is greater than 4MB */
+	/* size is less than 4MB */
+	addik	r11, r12, -0x0200000
+	bgei	r11, GT2 /* size is greater than 2MB */
+	addik	r9, r0, 0x0100000 /* TLB0 must be 1MB */
+	addik	r11, r12, -0x0100000
+	bgei	r11, GT1 /* size is greater than 1MB */
+	/* TLB1 is 0 which is setup above */
+	bri tlb_end
+GT4: /* r11 contains the rest - will be either 1 or 4 */
+	ori r9, r0, 0x400000 /* TLB0 is 4MB */
+	bri TLB1
+GT16: /* TLB0 is 16MB */
+	addik	r9, r0, 0x1000000 /* means TLB0 is 16MB */
+TLB1:
+	/* must be used r2 because of subtract if failed */
+	addik	r2, r11, -0x0400000
+	bgei	r2, GT20 /* size is greater than 16MB */
+	/* size is >16MB and <20MB */
+	addik	r11, r11, -0x0100000
+	bgei	r11, GT17 /* size is greater than 17MB */
+	/* kernel is >16MB and < 17MB */
+GT1:
+	addik	r10, r0, 0x0100000 /* means TLB1 is 1MB */
+	bri tlb_end
+GT2: /* TLB0 is 0 and TLB1 will be 4MB */
+GT17: /* TLB1 is 4MB - kernel size <20MB */
+	addik	r10, r0, 0x0400000 /* means TLB1 is 4MB */
+	bri tlb_end
+GT8: /* TLB0 is still zero that's why I can use only TLB1 */
+GT20: /* TLB1 is 16MB - kernel size >20MB */
+	addik	r10, r0, 0x1000000 /* means TLB1 is 16MB */
+tlb_end:
+
+	/*
+	 * Configure and load two entries into TLB slots 0 and 1.
+	 * In case we are pinning TLBs, these are reserved in by the
+	 * other TLB functions.  If not reserving, then it doesn't
+	 * matter where they are loaded.
+	 */
+	andi	r4,r4,0xfffffc00	/* Mask off the real page number */
+	ori	r4,r4,(TLB_WR | TLB_EX)	/* Set the write and execute bits */
+
+	/*
+	 * TLB0 is always used - check if is not zero (r9 stores TLB0 value)
+	 * if is use TLB1 value and clear it (r10 stores TLB1 value)
+	 */
+	bnei	r9, tlb0_not_zero
+	add	r9, r10, r0
+	add	r10, r0, r0
+tlb0_not_zero:
+
+	/* look at the code below */
+	ori	r30, r0, 0x200
+	andi	r29, r9, 0x100000
+	bneid	r29, 1f
+	addik	r30, r30, 0x80
+	andi	r29, r9, 0x400000
+	bneid	r29, 1f
+	addik	r30, r30, 0x80
+	andi	r29, r9, 0x1000000
+	bneid	r29, 1f
+	addik	r30, r30, 0x80
+1:
+	andi	r3,r3,0xfffffc00	/* Mask off the effective page number */
+	ori	r3,r3,(TLB_VALID)
+	or	r3, r3, r30
+
+	/* Load tlb_skip size value which is index to first unused TLB entry */
+	lwi	r11, r0, TOPHYS(tlb_skip)
+	mts     rtlbx,r11		/* TLB slow 0 */
+
+	mts	rtlblo,r4		/* Load the data portion of the entry */
+	mts	rtlbhi,r3		/* Load the tag portion of the entry */
+
+	/* Increase tlb_skip size */
+	addik	r11, r11, 1
+	swi	r11, r0, TOPHYS(tlb_skip)
+
+	/* TLB1 can be zeroes that's why we not setup it */
+	beqi	r10, jump_over2
+
+	/* look at the code below */
+	ori	r30, r0, 0x200
+	andi	r29, r10, 0x100000
+	bneid	r29, 1f
+	addik	r30, r30, 0x80
+	andi	r29, r10, 0x400000
+	bneid	r29, 1f
+	addik	r30, r30, 0x80
+	andi	r29, r10, 0x1000000
+	bneid	r29, 1f
+	addik	r30, r30, 0x80
+1:
+	addk	r4, r4, r9	/* previous addr + TLB0 size */
+	addk	r3, r3, r9
+
+	andi	r3,r3,0xfffffc00	/* Mask off the effective page number */
+	ori	r3,r3,(TLB_VALID)
+	or	r3, r3, r30
+
+	lwi	r11, r0, TOPHYS(tlb_skip)
+	mts     rtlbx, r11		/* r11 is used from TLB0 */
+
+	mts	rtlblo,r4		/* Load the data portion of the entry */
+	mts	rtlbhi,r3		/* Load the tag portion of the entry */
+
+	/* Increase tlb_skip size */
+	addik	r11, r11, 1
+	swi	r11, r0, TOPHYS(tlb_skip)
+
+jump_over2:
+	/*
+	 * Load a TLB entry for LMB, since we need access to
+	 * the exception vectors, using a 4k real==virtual mapping.
+	 */
+	/* Use temporary TLB_ID for LMB - clear this temporary mapping later */
+	ori	r11, r0, MICROBLAZE_LMB_TLB_ID
+	mts     rtlbx,r11
+
+	ori	r4,r0,(TLB_WR | TLB_EX)
+	ori	r3,r0,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+	mts	rtlblo,r4		/* Load the data portion of the entry */
+	mts	rtlbhi,r3		/* Load the tag portion of the entry */
+
+	/*
+	 * We now have the lower 16 Meg of RAM mapped into TLB entries, and the
+	 * caches ready to work.
+	 */
+turn_on_mmu:
+	ori	r15,r0,start_here
+	ori	r4,r0,MSR_KERNEL_VMS
+	mts	rmsr,r4
+	nop
+	rted	r15,0			/* enables MMU */
+	nop
+
+start_here:
+
+	/* Initialize small data anchors */
+	addik	r13, r0, _KERNEL_SDA_BASE_
+	addik	r2, r0, _KERNEL_SDA2_BASE_
+
+	/* Initialize stack pointer */
+	addik	r1, r0, init_thread_union + THREAD_SIZE - 4
+
+	/* Initialize r31 with current task address */
+	addik	r31, r0, init_task
+
+	addik	r11, r0, machine_early_init
+	brald	r15, r11
+	nop
+
+	/*
+	 * Initialize the MMU.
+	 */
+	bralid	r15, mmu_init
+	nop
+
+	/* Go back to running unmapped so we can load up new values
+	 * and change to using our exception vectors.
+	 * On the MicroBlaze, all we invalidate the used TLB entries to clear
+	 * the old 16M byte TLB mappings.
+	 */
+	ori	r15,r0,TOPHYS(kernel_load_context)
+	ori	r4,r0,MSR_KERNEL
+	mts	rmsr,r4
+	nop
+	bri	4
+	rted	r15,0
+	nop
+
+	/* Load up the kernel context */
+kernel_load_context:
+	ori	r5, r0, MICROBLAZE_LMB_TLB_ID
+	mts     rtlbx,r5
+	nop
+	mts	rtlbhi,r0
+	nop
+	addi	r15, r0, machine_halt
+	ori	r17, r0, start_kernel
+	ori	r4, r0, MSR_KERNEL_VMS
+	mts	rmsr, r4
+	nop
+	rted	r17, 0		/* enable MMU and jump to start_kernel */
+	nop

linux-7.2.3/arch/microblaze/kernel/irq.c

@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/ftrace.h>
+#include <linux/kernel.h>
+#include <linux/hardirq.h>
+#include <linux/interrupt.h>
+#include <linux/irqflags.h>
+#include <linux/seq_file.h>
+#include <linux/kernel_stat.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/of_irq.h>
+
+void __irq_entry do_IRQ(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+	trace_hardirqs_off();
+
+	irq_enter();
+	handle_arch_irq(regs);
+	irq_exit();
+	set_irq_regs(old_regs);
+	trace_hardirqs_on();
+}
+
+void __init init_IRQ(void)
+{
+	/* process the entire interrupt tree in one go */
+	irqchip_init();
+}

linux-7.2.3/arch/microblaze/kernel/kgdb.c

@@ -0,0 +1,152 @@
+/*
+ * Microblaze KGDB support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/asm-offsets.h>
+#include <asm/kgdb.h>
+#include <asm/pvr.h>
+
+#define GDB_REG		0
+#define GDB_PC		32
+#define GDB_MSR		33
+#define GDB_EAR		34
+#define GDB_ESR		35
+#define GDB_FSR		36
+#define GDB_BTR		37
+#define GDB_PVR		38
+#define GDB_REDR	50
+#define GDB_RPID	51
+#define GDB_RZPR	52
+#define GDB_RTLBX	53
+#define GDB_RTLBSX	54 /* mfs can't read it */
+#define GDB_RTLBLO	55
+#define GDB_RTLBHI	56
+
+/* keep pvr separately because it is unchangeable */
+static struct pvr_s pvr;
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	unsigned int i;
+	unsigned long *pt_regb = (unsigned long *)regs;
+	int temp;
+
+	/* registers r0 - r31, pc, msr, ear, esr, fsr + do not save pt_mode */
+	for (i = 0; i < (sizeof(struct pt_regs) / 4) - 1; i++)
+		gdb_regs[i] = pt_regb[i];
+
+	/* Branch target register can't be changed */
+	__asm__ __volatile__ ("mfs %0, rbtr;" : "=r"(temp) : );
+	gdb_regs[GDB_BTR] = temp;
+
+	/* pvr part  - we have 11 pvr regs */
+	for (i = 0; i < sizeof(struct pvr_s)/4; i++)
+		gdb_regs[GDB_PVR + i] = pvr.pvr[i];
+
+	/* read special registers - can't be changed */
+	__asm__ __volatile__ ("mfs %0, redr;" : "=r"(temp) : );
+	gdb_regs[GDB_REDR] = temp;
+	__asm__ __volatile__ ("mfs %0, rpid;" : "=r"(temp) : );
+	gdb_regs[GDB_RPID] = temp;
+	__asm__ __volatile__ ("mfs %0, rzpr;" : "=r"(temp) : );
+	gdb_regs[GDB_RZPR] = temp;
+	__asm__ __volatile__ ("mfs %0, rtlbx;" : "=r"(temp) : );
+	gdb_regs[GDB_RTLBX] = temp;
+	__asm__ __volatile__ ("mfs %0, rtlblo;" : "=r"(temp) : );
+	gdb_regs[GDB_RTLBLO] = temp;
+	__asm__ __volatile__ ("mfs %0, rtlbhi;" : "=r"(temp) : );
+	gdb_regs[GDB_RTLBHI] = temp;
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	unsigned int i;
+	unsigned long *pt_regb = (unsigned long *)regs;
+
+	/* pt_regs and gdb_regs have the same 37 values.
+	 * The rest of gdb_regs are unused and can't be changed.
+	 * r0 register value can't be changed too. */
+	for (i = 1; i < (sizeof(struct pt_regs) / 4) - 1; i++)
+		pt_regb[i] = gdb_regs[i];
+}
+
+asmlinkage void microblaze_kgdb_break(struct pt_regs *regs)
+{
+	if (kgdb_handle_exception(1, SIGTRAP, 0, regs) != 0)
+		return;
+
+	/* Jump over the first arch_kgdb_breakpoint which is barrier to
+	 * get kgdb work. The same solution is used for powerpc */
+	if (*(u32 *) (regs->pc) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr))
+		regs->pc += BREAK_INSTR_SIZE;
+}
+
+/* untested */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	unsigned int i;
+	unsigned long *pt_regb = (unsigned long *)(p->thread.regs);
+
+	/* registers r0 - r31, pc, msr, ear, esr, fsr + do not save pt_mode */
+	for (i = 0; i < (sizeof(struct pt_regs) / 4) - 1; i++)
+		gdb_regs[i] = pt_regb[i];
+
+	/* pvr part  - we have 11 pvr regs */
+	for (i = 0; i < sizeof(struct pvr_s)/4; i++)
+		gdb_regs[GDB_PVR + i] = pvr.pvr[i];
+}
+
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->pc = ip;
+}
+
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *regs)
+{
+	char *ptr;
+	unsigned long address;
+
+	switch (remcom_in_buffer[0]) {
+	case 'c':
+		/* handle the optional parameter */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &address))
+			regs->pc = address;
+
+		return 0;
+	}
+	return -1; /* this means that we do not want to exit from the handler */
+}
+
+int kgdb_arch_init(void)
+{
+	get_pvr(&pvr); /* Fill PVR structure */
+	return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+	/* Nothing to do */
+}
+
+/*
+ * Global data
+ */
+const struct kgdb_arch arch_kgdb_ops = {
+#ifdef __MICROBLAZEEL__
+	.gdb_bpt_instr = {0x18, 0x00, 0x0c, 0xba}, /* brki r16, 0x18 */
+#else
+	.gdb_bpt_instr = {0xba, 0x0c, 0x00, 0x18}, /* brki r16, 0x18 */
+#endif
+};

linux-7.2.3/arch/microblaze/kernel/mcount.S

@@ -0,0 +1,165 @@
+/*
+ * Low-level ftrace handling
+ *
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/linkage.h>
+
+#define NOALIGN_ENTRY(name)	.globl name; name:
+
+/* FIXME MS: I think that I don't need to save all regs */
+#define SAVE_REGS		\
+	addik	r1, r1, -120;	\
+	swi	r2, r1, 4;	\
+	swi	r3, r1, 8;	\
+	swi	r4, r1, 12;	\
+	swi	r5, r1, 116;	\
+	swi	r6, r1, 16;	\
+	swi	r7, r1, 20;	\
+	swi	r8, r1, 24;	\
+	swi	r9, r1, 28;	\
+	swi	r10, r1, 32;	\
+	swi	r11, r1, 36;	\
+	swi	r12, r1, 40;	\
+	swi	r13, r1, 44;	\
+	swi	r14, r1, 48;	\
+	swi	r16, r1, 52;	\
+	swi	r17, r1, 56;	\
+	swi	r18, r1, 60;	\
+	swi	r19, r1, 64;	\
+	swi	r20, r1, 68;	\
+	swi	r21, r1, 72;	\
+	swi	r22, r1, 76;	\
+	swi	r23, r1, 80;	\
+	swi	r24, r1, 84;	\
+	swi	r25, r1, 88;	\
+	swi	r26, r1, 92;	\
+	swi	r27, r1, 96;	\
+	swi	r28, r1, 100;	\
+	swi	r29, r1, 104;	\
+	swi	r30, r1, 108;	\
+	swi	r31, r1, 112;
+
+#define RESTORE_REGS		\
+	lwi	r2, r1, 4;	\
+	lwi	r3, r1, 8;	\
+	lwi	r4, r1, 12;	\
+	lwi	r5, r1, 116;	\
+	lwi	r6, r1, 16;	\
+	lwi	r7, r1, 20;	\
+	lwi	r8, r1, 24;	\
+	lwi	r9, r1, 28;	\
+	lwi	r10, r1, 32;	\
+	lwi	r11, r1, 36;	\
+	lwi	r12, r1, 40;	\
+	lwi	r13, r1, 44;	\
+	lwi	r14, r1, 48;	\
+	lwi	r16, r1, 52;	\
+	lwi	r17, r1, 56;	\
+	lwi	r18, r1, 60;	\
+	lwi	r19, r1, 64;	\
+	lwi	r20, r1, 68;	\
+	lwi	r21, r1, 72;	\
+	lwi	r22, r1, 76;	\
+	lwi	r23, r1, 80;	\
+	lwi	r24, r1, 84;	\
+	lwi	r25, r1, 88;	\
+	lwi	r26, r1, 92;	\
+	lwi	r27, r1, 96;	\
+	lwi	r28, r1, 100;	\
+	lwi	r29, r1, 104;	\
+	lwi	r30, r1, 108;	\
+	lwi	r31, r1, 112;	\
+	addik	r1, r1, 120;
+
+ENTRY(ftrace_stub)
+	rtsd	r15, 8;
+	nop;
+
+ENTRY(_mcount)
+#ifdef CONFIG_DYNAMIC_FTRACE
+ENTRY(ftrace_caller)
+	/* MS: It is just barrier which is removed from C code */
+	rtsd	r15, 8
+	nop
+#endif /* CONFIG_DYNAMIC_FTRACE */
+	SAVE_REGS
+	swi	r15, r1, 0;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifndef CONFIG_DYNAMIC_FTRACE
+	lwi	r5, r0, ftrace_graph_return;
+	addik	r6, r0, ftrace_stub; /* asm implementation */
+	cmpu	r5, r5, r6; /* ftrace_graph_return != ftrace_stub */
+	beqid	r5, end_graph_tracer;
+	nop;
+
+	lwi	r6, r0, ftrace_graph_entry;
+	addik	r5, r0, ftrace_graph_entry_stub; /* implemented in C */
+	cmpu	r5, r5, r6; /* ftrace_graph_entry != ftrace_graph_entry_stub */
+	beqid	r5, end_graph_tracer;
+	nop;
+#else /* CONFIG_DYNAMIC_FTRACE */
+NOALIGN_ENTRY(ftrace_call_graph)
+	/* MS: jump over graph function - replaced from C code */
+	bri	end_graph_tracer
+#endif /* CONFIG_DYNAMIC_FTRACE */
+	addik	r5, r1, 120; /* MS: load parent addr */
+	addik	r6, r15, 0; /* MS: load current function addr */
+	bralid	r15, prepare_ftrace_return;
+	nop;
+	/* MS: graph was taken that's why - can jump over function trace */
+	brid	end;
+	nop;
+end_graph_tracer:
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+#ifndef CONFIG_DYNAMIC_FTRACE
+	/* MS: test function trace if is taken or not */
+	lwi	r20, r0, ftrace_trace_function;
+	addik	r6, r0, ftrace_stub;
+	cmpu	r5, r20, r6; /* ftrace_trace_function != ftrace_stub */
+	beqid	r5, end; /* MS: not taken -> jump over */
+	nop;
+#else /* CONFIG_DYNAMIC_FTRACE */
+NOALIGN_ENTRY(ftrace_call)
+/* instruction for setup imm FUNC_part1, addik r20, r0, FUNC_part2 */
+	nop
+	nop
+#endif /* CONFIG_DYNAMIC_FTRACE */
+/* static normal trace */
+	lwi	r6, r1, 120; /* MS: load parent addr */
+	addik	r5, r15, -4; /* MS: load current function addr */
+	/* MS: here is dependency on previous code */
+	brald	r15, r20; /* MS: jump to ftrace handler */
+	nop;
+end:
+	lwi	r15, r1, 0;
+	RESTORE_REGS
+
+	rtsd	r15, 8; /* MS: jump back */
+	nop;
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(return_to_handler)
+	nop; /* MS: just barrier for rtsd r15, 8 */
+	nop;
+	SAVE_REGS
+	swi	r15, r1, 0;
+
+	/* MS: find out returning address */
+	bralid	r15, ftrace_return_to_handler;
+	nop;
+
+	/* MS: return value from ftrace_return_to_handler is my returning addr
+	 * must be before restore regs because I have to restore r3 content */
+	addik	r15, r3, 0;
+	RESTORE_REGS
+
+	rtsd	r15, 8; /* MS: jump back */
+	nop;
+#endif	/* CONFIG_FUNCTION_TRACER */

linux-7.2.3/arch/microblaze/kernel/microblaze_ksyms.c

@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ */
+
+#include <linux/export.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/in6.h>
+#include <linux/syscalls.h>
+
+#include <asm/checksum.h>
+#include <asm/cacheflush.h>
+#include <linux/io.h>
+#include <asm/page.h>
+#include <linux/ftrace.h>
+#include <linux/uaccess.h>
+#include <asm/xilinx_mb_manager.h>
+
+#ifdef CONFIG_FUNCTION_TRACER
+extern void _mcount(void);
+EXPORT_SYMBOL(_mcount);
+#endif
+
+/*
+ * Assembly functions that may be used (directly or indirectly) by modules
+ */
+EXPORT_SYMBOL(__copy_tofrom_user);
+
+#ifdef CONFIG_OPT_LIB_ASM
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+#endif
+
+EXPORT_SYMBOL(mbc);
+
+extern void __divsi3(void);
+EXPORT_SYMBOL(__divsi3);
+extern void __modsi3(void);
+EXPORT_SYMBOL(__modsi3);
+extern void __mulsi3(void);
+EXPORT_SYMBOL(__mulsi3);
+extern void __udivsi3(void);
+EXPORT_SYMBOL(__udivsi3);
+extern void __umodsi3(void);
+EXPORT_SYMBOL(__umodsi3);
+
+#ifdef CONFIG_MB_MANAGER
+extern void xmb_manager_register(uintptr_t phys_baseaddr, u32 cr_val,
+				 void (*callback)(void *data),
+				 void *priv, void (*reset_callback)(void *data));
+EXPORT_SYMBOL(xmb_manager_register);
+extern asmlinkage void xmb_inject_err(void);
+EXPORT_SYMBOL(xmb_inject_err);
+#endif

linux-7.2.3/arch/microblaze/kernel/misc.S

@@ -0,0 +1,66 @@
+/*
+ * Miscellaneous low-level MMU functions.
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
+ *
+ * Derived from arch/ppc/kernel/misc.S
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/linkage.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <linux/errno.h>
+#include <asm/mmu.h>
+#include <asm/page.h>
+
+	.text
+/*
+ * Flush MMU TLB
+ *
+ * We avoid flushing the pinned 0, 1 and possibly 2 entries.
+ */
+.globl _tlbia;
+.type  _tlbia, @function
+.align 4;
+_tlbia:
+	lwi	r12, r0, tlb_skip;
+	/* isync */
+_tlbia_1:
+	mts	rtlbx, r12
+	nop
+	mts	rtlbhi, r0 /* flush: ensure V is clear */
+	nop
+	rsubi	r11, r12, MICROBLAZE_TLB_SIZE - 1
+	bneid	r11, _tlbia_1 /* loop for all entries */
+	addik	r12, r12, 1
+	mbar	1 /* sync */
+	rtsd	r15, 8
+	nop
+	.size  _tlbia, . - _tlbia
+
+/*
+ * Flush MMU TLB for a particular address (in r5)
+ */
+.globl _tlbie;
+.type  _tlbie, @function
+.align 4;
+_tlbie:
+	mts	rtlbsx, r5 /* look up the address in TLB */
+	nop
+	mfs	r12, rtlbx /* Retrieve index */
+	nop
+	blti	r12, _tlbie_1 /* Check if found */
+	mts	rtlbhi, r0 /* flush: ensure V is clear */
+	nop
+	mbar	1 /* sync */
+_tlbie_1:
+	rtsd	r15, 8
+	nop
+
+	.size  _tlbie, . - _tlbie

linux-7.2.3/arch/microblaze/kernel/module.c

@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ */
+
+#include <linux/export.h>
+#include <linux/moduleloader.h>
+#include <linux/kernel.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/pgtable.h>
+
+#include <asm/cacheflush.h>
+
+int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
+	unsigned int symindex, unsigned int relsec, struct module *module)
+{
+
+	unsigned int i;
+	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym;
+	unsigned long int *location;
+	unsigned long int value;
+
+	pr_debug("Applying add relocation section %u to %u\n",
+		relsec, sechdrs[relsec].sh_info);
+
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
+
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr +
+				rela[i].r_offset;
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr +
+			ELF32_R_SYM(rela[i].r_info);
+		value = sym->st_value + rela[i].r_addend;
+
+		switch (ELF32_R_TYPE(rela[i].r_info)) {
+
+		/*
+		 * Be careful! mb-gcc / mb-ld splits the relocs between the
+		 * text and the reloc table. In general this means we must
+		 * read the current contents of (*location), add any offset
+		 * then store the result back in
+		 */
+
+		case R_MICROBLAZE_32:
+			*location = value;
+			break;
+
+		case R_MICROBLAZE_64:
+			location[0] = (location[0] & 0xFFFF0000) |
+					(value >> 16);
+			location[1] = (location[1] & 0xFFFF0000) |
+					(value & 0xFFFF);
+			break;
+
+		case R_MICROBLAZE_64_PCREL:
+			value -= (unsigned long int)(location) + 4;
+			location[0] = (location[0] & 0xFFFF0000) |
+					(value >> 16);
+			location[1] = (location[1] & 0xFFFF0000) |
+					(value & 0xFFFF);
+			pr_debug("R_MICROBLAZE_64_PCREL (%08lx)\n",
+				value);
+			break;
+
+		case R_MICROBLAZE_32_PCREL_LO:
+			pr_debug("R_MICROBLAZE_32_PCREL_LO\n");
+			break;
+
+		case R_MICROBLAZE_64_NONE:
+			pr_debug("R_MICROBLAZE_64_NONE\n");
+			break;
+
+		case R_MICROBLAZE_NONE:
+			pr_debug("R_MICROBLAZE_NONE\n");
+			break;
+
+		default:
+			pr_err("module %s: Unknown relocation: %u\n",
+				module->name,
+				ELF32_R_TYPE(rela[i].r_info));
+			return -ENOEXEC;
+		}
+	}
+	return 0;
+}
+
+int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
+		struct module *module)
+{
+	flush_dcache();
+	return 0;
+}

linux-7.2.3/arch/microblaze/kernel/process.c

@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/cpu.h>
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task.h>
+#include <linux/sched/task_stack.h>
+#include <linux/pm.h>
+#include <linux/tick.h>
+#include <linux/bitops.h>
+#include <linux/ptrace.h>
+#include <asm/cacheflush.h>
+
+void show_regs(struct pt_regs *regs)
+{
+	show_regs_print_info(KERN_INFO);
+
+	pr_info(" Registers dump: mode=%X\r\n", regs->pt_mode);
+	pr_info(" r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n",
+				regs->r1, regs->r2, regs->r3, regs->r4);
+	pr_info(" r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n",
+				regs->r5, regs->r6, regs->r7, regs->r8);
+	pr_info(" r9=%08lX, r10=%08lX, r11=%08lX, r12=%08lX\n",
+				regs->r9, regs->r10, regs->r11, regs->r12);
+	pr_info(" r13=%08lX, r14=%08lX, r15=%08lX, r16=%08lX\n",
+				regs->r13, regs->r14, regs->r15, regs->r16);
+	pr_info(" r17=%08lX, r18=%08lX, r19=%08lX, r20=%08lX\n",
+				regs->r17, regs->r18, regs->r19, regs->r20);
+	pr_info(" r21=%08lX, r22=%08lX, r23=%08lX, r24=%08lX\n",
+				regs->r21, regs->r22, regs->r23, regs->r24);
+	pr_info(" r25=%08lX, r26=%08lX, r27=%08lX, r28=%08lX\n",
+				regs->r25, regs->r26, regs->r27, regs->r28);
+	pr_info(" r29=%08lX, r30=%08lX, r31=%08lX, rPC=%08lX\n",
+				regs->r29, regs->r30, regs->r31, regs->pc);
+	pr_info(" msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n",
+				regs->msr, regs->ear, regs->esr, regs->fsr);
+}
+
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
+void flush_thread(void)
+{
+}
+
+int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
+{
+	u64 clone_flags = args->flags;
+	unsigned long usp = args->stack;
+	unsigned long tls = args->tls;
+	struct pt_regs *childregs = task_pt_regs(p);
+	struct thread_info *ti = task_thread_info(p);
+
+	if (unlikely(args->fn)) {
+		/* if we're creating a new kernel thread then just zeroing all
+		 * the registers. That's OK for a brand new thread.*/
+		memset(childregs, 0, sizeof(struct pt_regs));
+		memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
+		ti->cpu_context.r1  = (unsigned long)childregs;
+		ti->cpu_context.r20 = (unsigned long)args->fn;
+		ti->cpu_context.r19 = (unsigned long)args->fn_arg;
+		childregs->pt_mode = 1;
+		local_save_flags(childregs->msr);
+		ti->cpu_context.msr = childregs->msr & ~MSR_IE;
+		ti->cpu_context.r15 = (unsigned long)ret_from_kernel_thread - 8;
+		return 0;
+	}
+	*childregs = *current_pt_regs();
+	if (usp)
+		childregs->r1 = usp;
+
+	memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
+	ti->cpu_context.r1 = (unsigned long)childregs;
+	childregs->msr |= MSR_UMS;
+
+	/* we should consider the fact that childregs is a copy of the parent
+	 * regs which were saved immediately after entering the kernel state
+	 * before enabling VM. This MSR will be restored in switch_to and
+	 * RETURN() and we want to have the right machine state there
+	 * specifically this state must have INTs disabled before and enabled
+	 * after performing rtbd
+	 * compose the right MSR for RETURN(). It will work for switch_to also
+	 * excepting for VM and UMS
+	 * don't touch UMS , CARRY and cache bits
+	 * right now MSR is a copy of parent one */
+	childregs->msr &= ~MSR_EIP;
+	childregs->msr |= MSR_IE;
+	childregs->msr &= ~MSR_VM;
+	childregs->msr |= MSR_VMS;
+	childregs->msr |= MSR_EE; /* exceptions will be enabled*/
+
+	ti->cpu_context.msr = (childregs->msr|MSR_VM);
+	ti->cpu_context.msr &= ~MSR_UMS; /* switch_to to kernel mode */
+	ti->cpu_context.msr &= ~MSR_IE;
+	ti->cpu_context.r15 = (unsigned long)ret_from_fork - 8;
+
+	/*
+	 *  r21 is the thread reg, r10 is 6th arg to clone
+	 *  which contains TLS area
+	 */
+	if (clone_flags & CLONE_SETTLS)
+		childregs->r21 = tls;
+
+	return 0;
+}
+
+unsigned long __get_wchan(struct task_struct *p)
+{
+/* TBD (used by procfs) */
+	return 0;
+}
+
+/* Set up a thread for executing a new program */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
+{
+	regs->pc = pc;
+	regs->r1 = usp;
+	regs->pt_mode = 0;
+	regs->msr |= MSR_UMS;
+	regs->msr &= ~MSR_VM;
+}
+
+#include <linux/elfcore.h>
+/*
+ * Set up a thread for executing a new program
+ */
+int elf_core_copy_task_fpregs(struct task_struct *t, elf_fpregset_t *fpu)
+{
+	return 0; /* MicroBlaze has no separate FPU registers */
+}
+
+void arch_cpu_idle(void)
+{
+}

linux-7.2.3/arch/microblaze/kernel/prom.c

@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Procedures for creating, accessing and interpreting the device tree.
+ *
+ * Paul Mackerras	August 1996.
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ *  Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
+ *    {engebret|bergner}@us.ibm.com
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/memblock.h>
+#include <linux/of_fdt.h>
+
+void __init early_init_devtree(void *params)
+{
+	pr_debug(" -> early_init_devtree(%p)\n", params);
+
+	early_init_dt_scan(params, __pa(params));
+	if (!strlen(boot_command_line))
+		strscpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
+
+	memblock_allow_resize();
+
+	pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size());
+
+	pr_debug(" <- early_init_devtree()\n");
+}

linux-7.2.3/arch/microblaze/kernel/ptrace.c

@@ -0,0 +1,169 @@
+/*
+ * `ptrace' system call
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2004-2007 John Williams <john.williams@petalogix.com>
+ *
+ * derived from arch/v850/kernel/ptrace.c
+ *
+ * Copyright (C) 2002,03 NEC Electronics Corporation
+ * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
+ *
+ * Derived from arch/mips/kernel/ptrace.c:
+ *
+ * Copyright (C) 1992 Ross Biro
+ * Copyright (C) Linus Torvalds
+ * Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
+ * Copyright (C) 1996 David S. Miller
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999 MIPS Technologies, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/ptrace.h>
+#include <linux/signal.h>
+#include <linux/elf.h>
+#include <linux/audit.h>
+#include <linux/seccomp.h>
+
+#include <linux/errno.h>
+#include <asm/processor.h>
+#include <linux/uaccess.h>
+#include <asm/asm-offsets.h>
+#include <asm/cacheflush.h>
+#include <asm/syscall.h>
+#include <linux/io.h>
+
+/* Returns the address where the register at REG_OFFS in P is stashed away. */
+static microblaze_reg_t *reg_save_addr(unsigned reg_offs,
+					struct task_struct *t)
+{
+	struct pt_regs *regs;
+
+	/*
+	 * Three basic cases:
+	 *
+	 * (1)	A register normally saved before calling the scheduler, is
+	 *	available in the kernel entry pt_regs structure at the top
+	 *	of the kernel stack. The kernel trap/irq exit path takes
+	 *	care to save/restore almost all registers for ptrace'd
+	 *	processes.
+	 *
+	 * (2)	A call-clobbered register, where the process P entered the
+	 *	kernel via [syscall] trap, is not stored anywhere; that's
+	 *	OK, because such registers are not expected to be preserved
+	 *	when the trap returns anyway (so we don't actually bother to
+	 *	test for this case).
+	 *
+	 * (3)	A few registers not used at all by the kernel, and so
+	 *	normally never saved except by context-switches, are in the
+	 *	context switch state.
+	 */
+
+	/* Register saved during kernel entry (or not available). */
+	regs = task_pt_regs(t);
+
+	return (microblaze_reg_t *)((char *)regs + reg_offs);
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	int rval;
+	unsigned long val = 0;
+
+	switch (request) {
+	/* Read/write the word at location ADDR in the registers. */
+	case PTRACE_PEEKUSR:
+	case PTRACE_POKEUSR:
+		pr_debug("PEEKUSR/POKEUSR : 0x%08lx\n", addr);
+		rval = 0;
+		if (addr >= PT_SIZE && request == PTRACE_PEEKUSR) {
+			/*
+			 * Special requests that don't actually correspond
+			 * to offsets in struct pt_regs.
+			 */
+			if (addr == PT_TEXT_ADDR) {
+				val = child->mm->start_code;
+			} else if (addr == PT_DATA_ADDR) {
+				val = child->mm->start_data;
+			} else if (addr == PT_TEXT_LEN) {
+				val = child->mm->end_code
+					- child->mm->start_code;
+			} else {
+				rval = -EIO;
+			}
+		} else if (addr < PT_SIZE && (addr & 0x3) == 0) {
+			microblaze_reg_t *reg_addr = reg_save_addr(addr, child);
+			if (request == PTRACE_PEEKUSR)
+				val = *reg_addr;
+			else {
+#if 1
+				*reg_addr = data;
+#else
+				/* MS potential problem on WB system
+				 * Be aware that reg_addr is virtual address
+				 * virt_to_phys conversion is necessary.
+				 * This could be sensible solution.
+				 */
+				u32 paddr = virt_to_phys((u32)reg_addr);
+				invalidate_icache_range(paddr, paddr + 4);
+				*reg_addr = data;
+				flush_dcache_range(paddr, paddr + 4);
+#endif
+			}
+		} else
+			rval = -EIO;
+
+		if (rval == 0 && request == PTRACE_PEEKUSR)
+			rval = put_user(val, (unsigned long __user *)data);
+		break;
+	default:
+		rval = ptrace_request(child, request, addr, data);
+	}
+	return rval;
+}
+
+asmlinkage unsigned long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	unsigned long ret = 0;
+
+	secure_computing_strict(regs->r12);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    ptrace_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->regs[0].
+		 */
+		ret = -1L;
+
+	audit_syscall_entry(regs->r12, regs->r5, regs->r6, regs->r7, regs->r8);
+
+	return ret ?: regs->r12;
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	int step;
+
+	audit_syscall_exit(regs);
+
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		ptrace_report_syscall_exit(regs, step);
+}
+
+void ptrace_disable(struct task_struct *child)
+{
+	/* nothing to do */
+}

linux-7.2.3/arch/microblaze/kernel/reset.c

@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+
+void machine_shutdown(void)
+{
+	pr_notice("Machine shutdown...\n");
+	while (1)
+		;
+}
+
+void machine_halt(void)
+{
+	pr_notice("Machine halt...\n");
+	while (1)
+		;
+}
+
+void machine_power_off(void)
+{
+	pr_notice("Machine power off...\n");
+	while (1)
+		;
+}
+
+void machine_restart(char *cmd)
+{
+	do_kernel_restart(cmd);
+	/* Give the restart hook 1 s to take us down */
+	mdelay(1000);
+	pr_emerg("Reboot failed -- System halted\n");
+	while (1);
+}

linux-7.2.3/arch/microblaze/kernel/setup.c

@@ -0,0 +1,199 @@
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of_clk.h>
+#include <linux/clocksource.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <linux/cpu.h>
+#include <linux/initrd.h>
+#include <linux/console.h>
+#include <linux/debugfs.h>
+#include <linux/of_fdt.h>
+#include <linux/pgtable.h>
+
+#include <asm/setup.h>
+#include <asm/sections.h>
+#include <asm/page.h>
+#include <linux/io.h>
+#include <linux/bug.h>
+#include <linux/param.h>
+#include <linux/pci.h>
+#include <linux/cache.h>
+#include <linux/of.h>
+#include <linux/dma-mapping.h>
+#include <asm/cacheflush.h>
+#include <asm/entry.h>
+#include <asm/cpuinfo.h>
+
+
+DEFINE_PER_CPU(unsigned int, KSP);	/* Saved kernel stack pointer */
+DEFINE_PER_CPU(unsigned int, KM);	/* Kernel/user mode */
+DEFINE_PER_CPU(unsigned int, ENTRY_SP);	/* Saved SP on kernel entry */
+DEFINE_PER_CPU(unsigned int, R11_SAVE);	/* Temp variable for entry */
+DEFINE_PER_CPU(unsigned int, CURRENT_SAVE);	/* Saved current pointer */
+
+/*
+ * Placed cmd_line to .data section because can be initialized from
+ * ASM code. Default position is BSS section which is cleared
+ * in machine_early_init().
+ */
+char cmd_line[COMMAND_LINE_SIZE] __section(".data");
+
+void __init setup_arch(char **cmdline_p)
+{
+	*cmdline_p = boot_command_line;
+
+	setup_memory();
+
+	console_verbose();
+
+	unflatten_device_tree();
+
+	setup_cpuinfo();
+
+	microblaze_cache_init();
+
+	xilinx_pci_init();
+}
+
+#ifdef CONFIG_MTD_UCLINUX
+/* Handle both romfs and cramfs types, without generating unnecessary
+ code (ie no point checking for CRAMFS if it's not even enabled) */
+inline unsigned get_romfs_len(unsigned *addr)
+{
+#ifdef CONFIG_ROMFS_FS
+	if (memcmp(&addr[0], "-rom1fs-", 8) == 0) /* romfs */
+		return be32_to_cpu(addr[2]);
+#endif
+
+#ifdef CONFIG_CRAMFS
+	if (addr[0] == le32_to_cpu(0x28cd3d45)) /* cramfs */
+		return le32_to_cpu(addr[1]);
+#endif
+	return 0;
+}
+#endif	/* CONFIG_MTD_UCLINUX_EBSS */
+
+unsigned long kernel_tlb;
+
+void __init machine_early_init(const char *cmdline, unsigned int ram,
+		unsigned int fdt, unsigned int msr, unsigned int tlb0,
+		unsigned int tlb1)
+{
+	unsigned long *src, *dst;
+	unsigned int offset = 0;
+
+	/* If CONFIG_MTD_UCLINUX is defined, assume ROMFS is at the
+	 * end of kernel. There are two position which we want to check.
+	 * The first is __init_end and the second __bss_start.
+	 */
+#ifdef CONFIG_MTD_UCLINUX
+	int romfs_size;
+	unsigned int romfs_base;
+	char *old_klimit = klimit;
+
+	romfs_base = (ram ? ram : (unsigned int)&__init_end);
+	romfs_size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
+	if (!romfs_size) {
+		romfs_base = (unsigned int)&__bss_start;
+		romfs_size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
+	}
+
+	/* Move ROMFS out of BSS before clearing it */
+	if (romfs_size > 0) {
+		memmove(&__bss_stop, (int *)romfs_base, romfs_size);
+		klimit += romfs_size;
+	}
+#endif
+
+/* clearing bss section */
+	memset(__bss_start, 0, __bss_stop-__bss_start);
+	memset(_ssbss, 0, _esbss-_ssbss);
+
+/* initialize device tree for usage in early_printk */
+	early_init_devtree(_fdt_start);
+
+	/* setup kernel_tlb after BSS cleaning
+	 * Maybe worth to move to asm code */
+	kernel_tlb = tlb0 + tlb1;
+	/* printk("TLB1 0x%08x, TLB0 0x%08x, tlb 0x%x\n", tlb0,
+							tlb1, kernel_tlb); */
+
+	pr_info("Ramdisk addr 0x%08x, ", ram);
+	if (fdt)
+		pr_info("FDT at 0x%08x\n", fdt);
+	else
+		pr_info("Compiled-in FDT at %p\n", _fdt_start);
+
+#ifdef CONFIG_MTD_UCLINUX
+	pr_info("Found romfs @ 0x%08x (0x%08x)\n",
+			romfs_base, romfs_size);
+	pr_info("#### klimit %p ####\n", old_klimit);
+	BUG_ON(romfs_size < 0); /* What else can we do? */
+
+	pr_info("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
+			romfs_size, romfs_base, (unsigned)&__bss_stop);
+
+	pr_info("New klimit: 0x%08x\n", (unsigned)klimit);
+#endif
+
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+	if (msr) {
+		pr_info("!!!Your kernel has setup MSR instruction but ");
+		pr_cont("CPU don't have it %x\n", msr);
+	}
+#else
+	if (!msr) {
+		pr_info("!!!Your kernel not setup MSR instruction but ");
+		pr_cont("CPU have it %x\n", msr);
+	}
+#endif
+
+	/* Do not copy reset vectors. offset = 0x2 means skip the first
+	 * two instructions. dst is pointer to MB vectors which are placed
+	 * in block ram. If you want to copy reset vector setup offset to 0x0 */
+#if !CONFIG_MANUAL_RESET_VECTOR
+	offset = 0x2;
+#endif
+	dst = (unsigned long *) (offset * sizeof(u32));
+	for (src = __ivt_start + offset; src < __ivt_end; src++, dst++)
+		*dst = *src;
+
+	/* Initialize global data */
+	per_cpu(KM, 0) = 0x1;	/* We start in kernel mode */
+	per_cpu(CURRENT_SAVE, 0) = (unsigned long)current;
+}
+
+void __init time_init(void)
+{
+	of_clk_init(NULL);
+	setup_cpuinfo_clk();
+	timer_probe();
+}
+
+#ifdef CONFIG_DEBUG_FS
+struct dentry *of_debugfs_root;
+
+static int microblaze_debugfs_init(void)
+{
+	of_debugfs_root = debugfs_create_dir("microblaze", NULL);
+	return 0;
+}
+arch_initcall(microblaze_debugfs_init);
+
+static int __init debugfs_tlb(void)
+{
+	debugfs_create_u32("tlb_skip", S_IRUGO, of_debugfs_root, &tlb_skip);
+	return 0;
+}
+device_initcall(debugfs_tlb);
+#endif

linux-7.2.3/arch/microblaze/kernel/signal.c

@@ -0,0 +1,316 @@
+/*
+ * Signal handling
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2003,2004 John Williams <jwilliams@itee.uq.edu.au>
+ * Copyright (C) 2001 NEC Corporation
+ * Copyright (C) 2001 Miles Bader <miles@gnu.org>
+ * Copyright (C) 1999,2000 Niibe Yutaka & Kaz Kojima
+ * Copyright (C) 1991,1992 Linus Torvalds
+ *
+ * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
+ *
+ * This file was derived from the sh version, arch/sh/kernel/signal.c
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/personality.h>
+#include <linux/percpu.h>
+#include <linux/linkage.h>
+#include <linux/resume_user_mode.h>
+#include <asm/entry.h>
+#include <asm/ucontext.h>
+#include <linux/uaccess.h>
+#include <linux/syscalls.h>
+#include <asm/cacheflush.h>
+#include <asm/syscalls.h>
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+struct sigframe {
+	struct sigcontext sc;
+	unsigned long extramask[_NSIG_WORDS-1];
+	unsigned long tramp[2];	/* signal trampoline */
+};
+
+struct rt_sigframe {
+	struct siginfo info;
+	struct ucontext uc;
+	unsigned long tramp[2];	/* signal trampoline */
+};
+
+static int restore_sigcontext(struct pt_regs *regs,
+				struct sigcontext __user *sc, int *rval_p)
+{
+	unsigned int err = 0;
+
+#define COPY(x)		{err |= __get_user(regs->x, &sc->regs.x); }
+	COPY(r0);
+	COPY(r1);
+	COPY(r2);	COPY(r3);	COPY(r4);	COPY(r5);
+	COPY(r6);	COPY(r7);	COPY(r8);	COPY(r9);
+	COPY(r10);	COPY(r11);	COPY(r12);	COPY(r13);
+	COPY(r14);	COPY(r15);	COPY(r16);	COPY(r17);
+	COPY(r18);	COPY(r19);	COPY(r20);	COPY(r21);
+	COPY(r22);	COPY(r23);	COPY(r24);	COPY(r25);
+	COPY(r26);	COPY(r27);	COPY(r28);	COPY(r29);
+	COPY(r30);	COPY(r31);
+	COPY(pc);	COPY(ear);	COPY(esr);	COPY(fsr);
+#undef COPY
+
+	*rval_p = regs->r3;
+
+	return err;
+}
+
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame =
+		(struct rt_sigframe __user *)(regs->r1);
+
+	sigset_t set;
+	int rval;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	if (!access_ok(frame, sizeof(*frame)))
+		goto badframe;
+
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval))
+		goto badframe;
+
+	if (restore_altstack(&frame->uc.uc_stack))
+		goto badframe;
+
+	return rval;
+
+badframe:
+	force_sig(SIGSEGV);
+	return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+static int
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
+		unsigned long mask)
+{
+	int err = 0;
+
+#define COPY(x)		{err |= __put_user(regs->x, &sc->regs.x); }
+	COPY(r0);
+	COPY(r1);
+	COPY(r2);	COPY(r3);	COPY(r4);	COPY(r5);
+	COPY(r6);	COPY(r7);	COPY(r8);	COPY(r9);
+	COPY(r10);	COPY(r11);	COPY(r12);	COPY(r13);
+	COPY(r14);	COPY(r15);	COPY(r16);	COPY(r17);
+	COPY(r18);	COPY(r19);	COPY(r20);	COPY(r21);
+	COPY(r22);	COPY(r23);	COPY(r24);	COPY(r25);
+	COPY(r26);	COPY(r27);	COPY(r28);	COPY(r29);
+	COPY(r30);	COPY(r31);
+	COPY(pc);	COPY(ear);	COPY(esr);	COPY(fsr);
+#undef COPY
+
+	err |= __put_user(mask, &sc->oldmask);
+
+	return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *
+get_sigframe(struct ksignal *ksig, struct pt_regs *regs, size_t frame_size)
+{
+	/* Default to using normal stack */
+	unsigned long sp = sigsp(regs->r1, ksig);
+
+	return (void __user *)((sp - frame_size) & -8UL);
+}
+
+static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
+			  struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+	int err = 0, sig = ksig->sig;
+	unsigned long address = 0;
+	pmd_t *pmdp;
+	pte_t *ptep;
+
+	frame = get_sigframe(ksig, regs, sizeof(*frame));
+
+	if (!access_ok(frame, sizeof(*frame)))
+		return -EFAULT;
+
+	if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+		err |= copy_siginfo_to_user(&frame->info, &ksig->info);
+
+	/* Create the ucontext. */
+	err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(NULL, &frame->uc.uc_link);
+	err |= __save_altstack(&frame->uc.uc_stack, regs->r1);
+	err |= setup_sigcontext(&frame->uc.uc_mcontext,
+			regs, set->sig[0]);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+	/* Set up to return from userspace. If provided, use a stub
+	 already in userspace. */
+	/* minus 8 is offset to cater for "rtsd r15,8" */
+	/* addi r12, r0, __NR_sigreturn */
+	err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
+			frame->tramp + 0);
+	/* brki r14, 0x8 */
+	err |= __put_user(0xb9cc0008, frame->tramp + 1);
+
+	/* Return from sighandler will jump to the tramp.
+	 Negative 8 offset because return is rtsd r15, 8 */
+	regs->r15 = ((unsigned long)frame->tramp)-8;
+
+	address = ((unsigned long)frame->tramp);
+	pmdp = pmd_off(current->mm, address);
+
+	preempt_disable();
+	ptep = pte_offset_map(pmdp, address);
+	if (ptep && pte_present(*ptep)) {
+		address = (unsigned long) page_address(pte_page(*ptep));
+		/* MS: I need add offset in page */
+		address += ((unsigned long)frame->tramp) & ~PAGE_MASK;
+		/* MS address is virtual */
+		address = __virt_to_phys(address);
+		invalidate_icache_range(address, address + 8);
+		flush_dcache_range(address, address + 8);
+	}
+	if (ptep)
+		pte_unmap(ptep);
+	preempt_enable();
+	if (err)
+		return -EFAULT;
+
+	/* Set up registers for signal handler */
+	regs->r1 = (unsigned long) frame;
+
+	/* Signal handler args: */
+	regs->r5 = sig; /* arg 0: signum */
+	regs->r6 = (unsigned long) &frame->info; /* arg 1: siginfo */
+	regs->r7 = (unsigned long) &frame->uc; /* arg2: ucontext */
+	/* Offset to handle microblaze rtid r14, 0 */
+	regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
+
+#ifdef DEBUG_SIG
+	pr_info("SIG deliver (%s:%d): sp=%p pc=%08lx\n",
+		current->comm, current->pid, frame, regs->pc);
+#endif
+
+	return 0;
+}
+
+/* Handle restarting system calls */
+static inline void
+handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
+{
+	switch (regs->r3) {
+	case -ERESTART_RESTARTBLOCK:
+	case -ERESTARTNOHAND:
+		if (!has_handler)
+			goto do_restart;
+		regs->r3 = -EINTR;
+		break;
+	case -ERESTARTSYS:
+		if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
+			regs->r3 = -EINTR;
+			break;
+	}
+		fallthrough;
+	case -ERESTARTNOINTR:
+do_restart:
+		/* offset of 4 bytes to re-execute trap (brki) instruction */
+		regs->pc -= 4;
+		break;
+	}
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+
+static void
+handle_signal(struct ksignal *ksig, struct pt_regs *regs)
+{
+	sigset_t *oldset = sigmask_to_save();
+	int ret;
+
+	/* Set up the stack frame */
+	ret = setup_rt_frame(ksig, oldset, regs);
+
+	signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+static void do_signal(struct pt_regs *regs, int in_syscall)
+{
+	struct ksignal ksig;
+
+#ifdef DEBUG_SIG
+	pr_info("do signal: %p %d\n", regs, in_syscall);
+	pr_info("do signal2: %lx %lx %ld [%lx]\n", regs->pc, regs->r1,
+			regs->r12, read_thread_flags());
+#endif
+
+	if (get_signal(&ksig)) {
+		/* Whee! Actually deliver the signal. */
+		if (in_syscall)
+			handle_restart(regs, &ksig.ka, 1);
+		handle_signal(&ksig, regs);
+		return;
+	}
+
+	if (in_syscall)
+		handle_restart(regs, NULL, 0);
+
+	/*
+	 * If there's no signal to deliver, we just put the saved sigmask
+	 * back.
+	 */
+	restore_saved_sigmask();
+}
+
+asmlinkage void do_notify_resume(struct pt_regs *regs, int in_syscall)
+{
+	if (test_thread_flag(TIF_SIGPENDING) ||
+	    test_thread_flag(TIF_NOTIFY_SIGNAL))
+		do_signal(regs, in_syscall);
+
+	if (test_thread_flag(TIF_NOTIFY_RESUME))
+		resume_user_mode_work(regs);
+}

linux-7.2.3/arch/microblaze/kernel/stacktrace.c

@@ -0,0 +1,31 @@
+/*
+ * Stack trace support for Microblaze.
+ *
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/thread_info.h>
+#include <linux/ptrace.h>
+#include <asm/unwind.h>
+
+void save_stack_trace(struct stack_trace *trace)
+{
+	/* Exclude our helper functions from the trace*/
+	trace->skip += 2;
+	microblaze_unwind(NULL, trace, "");
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	microblaze_unwind(tsk, trace, "");
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);