Resguardo inicial

linux-7.2.3/arch/powerpc/platforms/86xx/Kconfig

@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+menuconfig PPC_86xx
+	bool "86xx-based boards"
+	depends on PPC_BOOK3S_32
+	select FSL_SOC
+	select ALTIVEC
+	help
+	  The Freescale E600 SoCs have 74xx cores.
+
+if PPC_86xx
+
+config GEF_PPC9A
+	bool "GE PPC9A"
+	select DEFAULT_UIMAGE
+	select MMIO_NVRAM
+	select GPIOLIB
+	select GE_FPGA
+	help
+	  This option enables support for the GE PPC9A.
+
+config GEF_SBC310
+	bool "GE SBC310"
+	select DEFAULT_UIMAGE
+	select MMIO_NVRAM
+	select GPIOLIB
+	select GE_FPGA
+	help
+	  This option enables support for the GE SBC310.
+
+config GEF_SBC610
+	bool "GE SBC610"
+	select DEFAULT_UIMAGE
+	select MMIO_NVRAM
+	select GPIOLIB
+	select GE_FPGA
+	select HAVE_RAPIDIO
+	help
+	  This option enables support for the GE SBC610.
+
+config MVME7100
+	bool "Artesyn MVME7100"
+	help
+	  This option enables support for the Emerson/Artesyn MVME7100 board.
+
+endif
+
+config MPC8641
+	bool
+	select HAVE_PCI
+	select FSL_PCI if PCI
+	select PPC_UDBG_16550
+	select MPIC
+	default y if GEF_SBC610 || GEF_SBC310 || GEF_PPC9A \
+			|| MVME7100

linux-7.2.3/arch/powerpc/platforms/86xx/Makefile

@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the PowerPC 86xx linux kernel.
+#
+
+obj-y				:= pic.o common.o
+obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
+obj-$(CONFIG_GEF_SBC610)	+= gef_sbc610.o
+obj-$(CONFIG_GEF_SBC310)	+= gef_sbc310.o
+obj-$(CONFIG_GEF_PPC9A)		+= gef_ppc9a.o
+obj-$(CONFIG_MVME7100)          += mvme7100.o

linux-7.2.3/arch/powerpc/platforms/86xx/common.c

@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Routines common to most mpc86xx-based boards.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <asm/reg.h>
+#include <asm/synch.h>
+
+#include "mpc86xx.h"
+
+static const struct of_device_id mpc86xx_common_ids[] __initconst = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .name = "localbus", },
+	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
+	{},
+};
+
+int __init mpc86xx_common_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc86xx_common_ids, NULL);
+}
+
+long __init mpc86xx_time_init(void)
+{
+	unsigned int temp;
+
+	/* Set the time base to zero */
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, 0);
+
+	temp = mfspr(SPRN_HID0);
+	temp |= HID0_TBEN;
+	mtspr(SPRN_HID0, temp);
+	isync();
+
+	return 0;
+}

linux-7.2.3/arch/powerpc/platforms/86xx/gef_ppc9a.c

@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GE PPC9A board support
+ *
+ * Author: Martyn Welch <martyn.welch@ge.com>
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+#include <asm/nvram.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/ge/ge_pic.h>
+
+#include "mpc86xx.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG (fmt...) do { printk(KERN_ERR "PPC9A: " fmt); } while (0)
+#else
+#define DBG (fmt...) do { } while (0)
+#endif
+
+void __iomem *ppc9a_regs;
+
+static void __init gef_ppc9a_init_irq(void)
+{
+	struct device_node *cascade_node = NULL;
+
+	mpc86xx_init_irq();
+
+	/*
+	 * There is a simple interrupt handler in the main FPGA, this needs
+	 * to be cascaded into the MPIC
+	 */
+	cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic-1.00");
+	if (!cascade_node) {
+		printk(KERN_WARNING "PPC9A: No FPGA PIC\n");
+		return;
+	}
+
+	gef_pic_init(cascade_node);
+	of_node_put(cascade_node);
+}
+
+static void __init gef_ppc9a_setup_arch(void)
+{
+	struct device_node *regs;
+
+	printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n");
+
+#ifdef CONFIG_SMP
+	mpc86xx_smp_init();
+#endif
+
+	fsl_pci_assign_primary();
+
+	/* Remap basic board registers */
+	regs = of_find_compatible_node(NULL, NULL, "gef,ppc9a-fpga-regs");
+	if (regs) {
+		ppc9a_regs = of_iomap(regs, 0);
+		if (ppc9a_regs == NULL)
+			printk(KERN_WARNING "Unable to map board registers\n");
+		of_node_put(regs);
+	}
+
+#if defined(CONFIG_MMIO_NVRAM)
+	mmio_nvram_init();
+#endif
+}
+
+/* Return the PCB revision */
+static unsigned int gef_ppc9a_get_pcb_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32be(ppc9a_regs);
+	return (reg >> 16) & 0xff;
+}
+
+/* Return the board (software) revision */
+static unsigned int gef_ppc9a_get_board_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32be(ppc9a_regs);
+	return (reg >> 8) & 0xff;
+}
+
+/* Return the FPGA revision */
+static unsigned int gef_ppc9a_get_fpga_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32be(ppc9a_regs);
+	return reg & 0xf;
+}
+
+/* Return VME Geographical Address */
+static unsigned int gef_ppc9a_get_vme_geo_addr(void)
+{
+	unsigned int reg;
+
+	reg = ioread32be(ppc9a_regs + 0x4);
+	return reg & 0x1f;
+}
+
+/* Return VME System Controller Status */
+static unsigned int gef_ppc9a_get_vme_is_syscon(void)
+{
+	unsigned int reg;
+
+	reg = ioread32be(ppc9a_regs + 0x4);
+	return (reg >> 9) & 0x1;
+}
+
+static void gef_ppc9a_show_cpuinfo(struct seq_file *m)
+{
+	uint svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
+
+	seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(),
+		('A' + gef_ppc9a_get_board_rev()));
+	seq_printf(m, "FPGA Revision\t: %u\n", gef_ppc9a_get_fpga_rev());
+
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+	seq_printf(m, "VME geo. addr\t: %u\n", gef_ppc9a_get_vme_geo_addr());
+
+	seq_printf(m, "VME syscon\t: %s\n",
+		gef_ppc9a_get_vme_is_syscon() ? "yes" : "no");
+}
+
+static void gef_ppc9a_nec_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+
+	/* Do not do the fixup on other platforms! */
+	if (!machine_is(gef_ppc9a))
+		return;
+
+	printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
+
+	/* Ensure ports 1, 2, 3, 4 & 5 are enabled */
+	pci_read_config_dword(pdev, 0xe0, &val);
+	pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5);
+
+	/* System clock is 48-MHz Oscillator and EHCI Enabled. */
+	pci_write_config_dword(pdev, 0xe4, 1 << 5);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+	gef_ppc9a_nec_fixup);
+
+machine_arch_initcall(gef_ppc9a, mpc86xx_common_publish_devices);
+
+define_machine(gef_ppc9a) {
+	.name			= "GE PPC9A",
+	.compatible		= "gef,ppc9a",
+	.setup_arch		= gef_ppc9a_setup_arch,
+	.init_IRQ		= gef_ppc9a_init_irq,
+	.show_cpuinfo		= gef_ppc9a_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.time_init		= mpc86xx_time_init,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};

linux-7.2.3/arch/powerpc/platforms/86xx/gef_sbc310.c

@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GE SBC310 board support
+ *
+ * Author: Martyn Welch <martyn.welch@ge.com>
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+#include <asm/nvram.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/ge/ge_pic.h>
+
+#include "mpc86xx.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG (fmt...) do { printk(KERN_ERR "SBC310: " fmt); } while (0)
+#else
+#define DBG (fmt...) do { } while (0)
+#endif
+
+void __iomem *sbc310_regs;
+
+static void __init gef_sbc310_init_irq(void)
+{
+	struct device_node *cascade_node = NULL;
+
+	mpc86xx_init_irq();
+
+	/*
+	 * There is a simple interrupt handler in the main FPGA, this needs
+	 * to be cascaded into the MPIC
+	 */
+	cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic");
+	if (!cascade_node) {
+		printk(KERN_WARNING "SBC310: No FPGA PIC\n");
+		return;
+	}
+
+	gef_pic_init(cascade_node);
+	of_node_put(cascade_node);
+}
+
+static void __init gef_sbc310_setup_arch(void)
+{
+	struct device_node *regs;
+	printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n");
+
+#ifdef CONFIG_SMP
+	mpc86xx_smp_init();
+#endif
+
+	fsl_pci_assign_primary();
+
+	/* Remap basic board registers */
+	regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
+	if (regs) {
+		sbc310_regs = of_iomap(regs, 0);
+		if (sbc310_regs == NULL)
+			printk(KERN_WARNING "Unable to map board registers\n");
+		of_node_put(regs);
+	}
+
+#if defined(CONFIG_MMIO_NVRAM)
+	mmio_nvram_init();
+#endif
+}
+
+/* Return the PCB revision */
+static unsigned int gef_sbc310_get_board_id(void)
+{
+	unsigned int reg;
+
+	reg = ioread32(sbc310_regs);
+	return reg & 0xff;
+}
+
+/* Return the PCB revision */
+static unsigned int gef_sbc310_get_pcb_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32(sbc310_regs);
+	return (reg >> 8) & 0xff;
+}
+
+/* Return the board (software) revision */
+static unsigned int gef_sbc310_get_board_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32(sbc310_regs);
+	return (reg >> 16) & 0xff;
+}
+
+/* Return the FPGA revision */
+static unsigned int gef_sbc310_get_fpga_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32(sbc310_regs);
+	return (reg >> 24) & 0xf;
+}
+
+static void gef_sbc310_show_cpuinfo(struct seq_file *m)
+{
+	uint svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
+
+	seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id());
+	seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(),
+		('A' + gef_sbc310_get_board_rev() - 1));
+	seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc310_get_fpga_rev());
+
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+}
+
+static void gef_sbc310_nec_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+
+	/* Do not do the fixup on other platforms! */
+	if (!machine_is(gef_sbc310))
+		return;
+
+	printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
+
+	/* Ensure only ports 1 & 2 are enabled */
+	pci_read_config_dword(pdev, 0xe0, &val);
+	pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x2);
+
+	/* System clock is 48-MHz Oscillator and EHCI Enabled. */
+	pci_write_config_dword(pdev, 0xe4, 1 << 5);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+	gef_sbc310_nec_fixup);
+
+machine_arch_initcall(gef_sbc310, mpc86xx_common_publish_devices);
+
+define_machine(gef_sbc310) {
+	.name			= "GE SBC310",
+	.compatible		= "gef,sbc310",
+	.setup_arch		= gef_sbc310_setup_arch,
+	.init_IRQ		= gef_sbc310_init_irq,
+	.show_cpuinfo		= gef_sbc310_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.time_init		= mpc86xx_time_init,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};

linux-7.2.3/arch/powerpc/platforms/86xx/gef_sbc610.c

@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GE SBC610 board support
+ *
+ * Author: Martyn Welch <martyn.welch@ge.com>
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+#include <asm/nvram.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/ge/ge_pic.h>
+
+#include "mpc86xx.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0)
+#else
+#define DBG (fmt...) do { } while (0)
+#endif
+
+void __iomem *sbc610_regs;
+
+static void __init gef_sbc610_init_irq(void)
+{
+	struct device_node *cascade_node = NULL;
+
+	mpc86xx_init_irq();
+
+	/*
+	 * There is a simple interrupt handler in the main FPGA, this needs
+	 * to be cascaded into the MPIC
+	 */
+	cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic");
+	if (!cascade_node) {
+		printk(KERN_WARNING "SBC610: No FPGA PIC\n");
+		return;
+	}
+
+	gef_pic_init(cascade_node);
+	of_node_put(cascade_node);
+}
+
+static void __init gef_sbc610_setup_arch(void)
+{
+	struct device_node *regs;
+
+	printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
+
+#ifdef CONFIG_SMP
+	mpc86xx_smp_init();
+#endif
+
+	fsl_pci_assign_primary();
+
+	/* Remap basic board registers */
+	regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
+	if (regs) {
+		sbc610_regs = of_iomap(regs, 0);
+		if (sbc610_regs == NULL)
+			printk(KERN_WARNING "Unable to map board registers\n");
+		of_node_put(regs);
+	}
+
+#if defined(CONFIG_MMIO_NVRAM)
+	mmio_nvram_init();
+#endif
+}
+
+/* Return the PCB revision */
+static unsigned int gef_sbc610_get_pcb_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32(sbc610_regs);
+	return (reg >> 8) & 0xff;
+}
+
+/* Return the board (software) revision */
+static unsigned int gef_sbc610_get_board_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32(sbc610_regs);
+	return (reg >> 16) & 0xff;
+}
+
+/* Return the FPGA revision */
+static unsigned int gef_sbc610_get_fpga_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread32(sbc610_regs);
+	return (reg >> 24) & 0xf;
+}
+
+static void gef_sbc610_show_cpuinfo(struct seq_file *m)
+{
+	uint svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
+
+	seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(),
+		('A' + gef_sbc610_get_board_rev() - 1));
+	seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev());
+
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+}
+
+static void gef_sbc610_nec_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+
+	/* Do not do the fixup on other platforms! */
+	if (!machine_is(gef_sbc610))
+		return;
+
+	printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
+
+	/* Ensure ports 1, 2, 3, 4 & 5 are enabled */
+	pci_read_config_dword(pdev, 0xe0, &val);
+	pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5);
+
+	/* System clock is 48-MHz Oscillator and EHCI Enabled. */
+	pci_write_config_dword(pdev, 0xe4, 1 << 5);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+	gef_sbc610_nec_fixup);
+
+machine_arch_initcall(gef_sbc610, mpc86xx_common_publish_devices);
+
+define_machine(gef_sbc610) {
+	.name			= "GE SBC610",
+	.compatible		= "gef,sbc610",
+	.setup_arch		= gef_sbc610_setup_arch,
+	.init_IRQ		= gef_sbc610_init_irq,
+	.show_cpuinfo		= gef_sbc610_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.time_init		= mpc86xx_time_init,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};

linux-7.2.3/arch/powerpc/platforms/86xx/mpc86xx.h

@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+#ifndef __MPC86XX_H__
+#define __MPC86XX_H__
+
+/*
+ * Declaration for the various functions exported by the
+ * mpc86xx_* files. Mostly for use by mpc86xx_setup().
+ */
+
+extern void mpc86xx_smp_init(void);
+extern void mpc86xx_init_irq(void);
+extern long mpc86xx_time_init(void);
+extern int mpc86xx_common_publish_devices(void);
+
+#endif	/* __MPC86XX_H__ */

linux-7.2.3/arch/powerpc/platforms/86xx/mpc86xx_smp.c

@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Author: Xianghua Xiao <x.xiao@freescale.com>
+ *         Zhang Wei <wei.zhang@freescale.com>
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pgtable.h>
+
+#include <asm/text-patching.h>
+#include <asm/page.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <asm/cacheflush.h>
+#include <asm/inst.h>
+
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+
+extern void __secondary_start_mpc86xx(void);
+
+#define MCM_PORT_CONFIG_OFFSET	0x10
+
+/* Offset from CCSRBAR */
+#define MPC86xx_MCM_OFFSET      (0x1000)
+#define MPC86xx_MCM_SIZE        (0x1000)
+
+static void __init
+smp_86xx_release_core(int nr)
+{
+	__be32 __iomem *mcm_vaddr;
+	unsigned long pcr;
+
+	if (nr < 0 || nr >= NR_CPUS)
+		return;
+
+	/*
+	 * Startup Core #nr.
+	 */
+	mcm_vaddr = ioremap(get_immrbase() + MPC86xx_MCM_OFFSET,
+			    MPC86xx_MCM_SIZE);
+	pcr = in_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2));
+	pcr |= 1 << (nr + 24);
+	out_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2), pcr);
+
+	iounmap(mcm_vaddr);
+}
+
+
+static int __init
+smp_86xx_kick_cpu(int nr)
+{
+	unsigned int save_vector;
+	unsigned long target, flags;
+	int n = 0;
+	unsigned int *vector = (unsigned int *)(KERNELBASE + 0x100);
+
+	if (nr < 0 || nr >= NR_CPUS)
+		return -ENOENT;
+
+	pr_debug("smp_86xx_kick_cpu: kick CPU #%d\n", nr);
+
+	local_irq_save(flags);
+
+	/* Save reset vector */
+	save_vector = *vector;
+
+	/* Setup fake reset vector to call __secondary_start_mpc86xx. */
+	target = (unsigned long) __secondary_start_mpc86xx;
+	patch_branch(vector, target, BRANCH_SET_LINK);
+
+	/* Kick that CPU */
+	smp_86xx_release_core(nr);
+
+	/* Wait a bit for the CPU to take the exception. */
+	while ((__secondary_hold_acknowledge != nr) && (n++, n < 1000))
+		mdelay(1);
+
+	/* Restore the exception vector */
+	patch_instruction(vector, ppc_inst(save_vector));
+
+	local_irq_restore(flags);
+
+	pr_debug("wait CPU #%d for %d msecs.\n", nr, n);
+
+	return 0;
+}
+
+
+static void __init
+smp_86xx_setup_cpu(int cpu_nr)
+{
+	mpic_setup_this_cpu();
+}
+
+
+struct smp_ops_t smp_86xx_ops = {
+	.cause_nmi_ipi = NULL,
+	.message_pass = smp_mpic_message_pass,
+	.probe = smp_mpic_probe,
+	.kick_cpu = smp_86xx_kick_cpu,
+	.setup_cpu = smp_86xx_setup_cpu,
+	.take_timebase = smp_generic_take_timebase,
+	.give_timebase = smp_generic_give_timebase,
+};
+
+
+void __init
+mpc86xx_smp_init(void)
+{
+	smp_ops = &smp_86xx_ops;
+}

linux-7.2.3/arch/powerpc/platforms/86xx/mvme7100.c

@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Board setup routines for the Emerson/Artesyn MVME7100
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
+ *
+ * Based on earlier code by:
+ *
+ *	Ajit Prem <ajit.prem@emerson.com>
+ *	Copyright 2008 Emerson
+ *
+ * USB host fixup is borrowed by:
+ *
+ *	Martyn Welch <martyn.welch@ge.com>
+ *	Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ */
+
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/of_address.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc86xx.h"
+
+#define MVME7100_INTERRUPT_REG_2_OFFSET	0x05
+#define MVME7100_DS1375_MASK		0x40
+#define MVME7100_MAX6649_MASK		0x20
+#define MVME7100_ABORT_MASK		0x10
+
+/*
+ * Setup the architecture
+ */
+static void __init mvme7100_setup_arch(void)
+{
+	struct device_node *bcsr_node;
+	void __iomem *mvme7100_regs = NULL;
+	u8 reg;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mvme7100_setup_arch()", 0);
+
+#ifdef CONFIG_SMP
+	mpc86xx_smp_init();
+#endif
+
+	fsl_pci_assign_primary();
+
+	/* Remap BCSR registers */
+	bcsr_node = of_find_compatible_node(NULL, NULL,
+			"artesyn,mvme7100-bcsr");
+	if (bcsr_node) {
+		mvme7100_regs = of_iomap(bcsr_node, 0);
+		of_node_put(bcsr_node);
+	}
+
+	if (mvme7100_regs) {
+		/* Disable ds1375, max6649, and abort interrupts */
+		reg = readb(mvme7100_regs + MVME7100_INTERRUPT_REG_2_OFFSET);
+		reg |= MVME7100_DS1375_MASK | MVME7100_MAX6649_MASK
+			| MVME7100_ABORT_MASK;
+		writeb(reg, mvme7100_regs + MVME7100_INTERRUPT_REG_2_OFFSET);
+	} else
+		pr_warn("Unable to map board registers\n");
+
+	pr_info("MVME7100 board from Artesyn\n");
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mvme7100_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "artesyn,MVME7100");
+}
+
+static void mvme7100_usb_host_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+
+	if (!machine_is(mvme7100))
+		return;
+
+	/* Ensure only ports 1 & 2 are enabled */
+	pci_read_config_dword(pdev, 0xe0, &val);
+	pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x2);
+
+	/* System clock is 48-MHz Oscillator and EHCI Enabled. */
+	pci_write_config_dword(pdev, 0xe4, 1 << 5);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+	mvme7100_usb_host_fixup);
+
+machine_arch_initcall(mvme7100, mpc86xx_common_publish_devices);
+
+define_machine(mvme7100) {
+	.name			= "MVME7100",
+	.probe			= mvme7100_probe,
+	.setup_arch		= mvme7100_setup_arch,
+	.init_IRQ		= mpc86xx_init_irq,
+	.get_irq		= mpic_get_irq,
+	.time_init		= mpc86xx_time_init,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};

linux-7.2.3/arch/powerpc/platforms/86xx/pic.c

@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+
+#include <asm/mpic.h>
+#include <asm/i8259.h>
+
+#include "mpc86xx.h"
+
+#ifdef CONFIG_PPC_I8259
+static void mpc86xx_8259_cascade(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned int cascade_irq = i8259_irq();
+
+	if (cascade_irq)
+		generic_handle_irq(cascade_irq);
+
+	chip->irq_eoi(&desc->irq_data);
+}
+#endif	/* CONFIG_PPC_I8259 */
+
+void __init mpc86xx_init_irq(void)
+{
+#ifdef CONFIG_PPC_I8259
+	struct device_node *np;
+	struct device_node *cascade_node = NULL;
+	int cascade_irq;
+#endif
+
+	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+			MPIC_SINGLE_DEST_CPU,
+			0, 256, " MPIC     ");
+	BUG_ON(mpic == NULL);
+
+	mpic_init(mpic);
+
+#ifdef CONFIG_PPC_I8259
+	/* Initialize i8259 controller */
+	for_each_node_by_type(np, "interrupt-controller")
+		if (of_device_is_compatible(np, "chrp,iic")) {
+			cascade_node = np;
+			break;
+		}
+
+	if (cascade_node == NULL) {
+		printk(KERN_DEBUG "Could not find i8259 PIC\n");
+		return;
+	}
+
+	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+	if (!cascade_irq) {
+		printk(KERN_ERR "Failed to map cascade interrupt\n");
+		return;
+	}
+
+	i8259_init(cascade_node, 0);
+	of_node_put(cascade_node);
+
+	irq_set_chained_handler(cascade_irq, mpc86xx_8259_cascade);
+#endif
+}