Resguardo inicial

linux-7.2.3/arch/xtensa/platforms/xtfpga/Makefile

@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Makefile for the Tensilica xtavnet Emulation Board
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+# Note 2! The CFLAGS definitions are in the main makefile...
+
+obj-y			+= setup.o
+obj-$(CONFIG_XTFPGA_LCD) += lcd.o

linux-7.2.3/arch/xtensa/platforms/xtfpga/include/platform/hardware.h

@@ -0,0 +1,60 @@
+/*
+ * arch/xtensa/platform/xtavnet/include/platform/hardware.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Tensilica Inc.
+ */
+
+/*
+ * This file contains the hardware configuration of the XTAVNET boards.
+ */
+
+#include <asm/types.h>
+
+#ifndef __XTENSA_XTAVNET_HARDWARE_H
+#define __XTENSA_XTAVNET_HARDWARE_H
+
+/* Default assignment of LX60 devices to external interrupts. */
+
+#ifdef CONFIG_XTENSA_MX
+#define DUART16552_INTNUM	XCHAL_EXTINT3_NUM
+#define OETH_IRQ		XCHAL_EXTINT4_NUM
+#define C67X00_IRQ		XCHAL_EXTINT8_NUM
+#else
+#define DUART16552_INTNUM	XCHAL_EXTINT0_NUM
+#define OETH_IRQ		XCHAL_EXTINT1_NUM
+#define C67X00_IRQ		XCHAL_EXTINT5_NUM
+#endif
+
+/*
+ *  Device addresses and parameters.
+ */
+
+/* UART */
+#define DUART16552_PADDR	(XCHAL_KIO_PADDR + 0x0D050020)
+
+/* Misc. */
+#define XTFPGA_FPGAREGS_VADDR	IOADDR(0x0D020000)
+/* Clock frequency in Hz (read-only):  */
+#define XTFPGA_CLKFRQ_VADDR	(XTFPGA_FPGAREGS_VADDR + 0x04)
+/* Setting of 8 DIP switches:  */
+#define DIP_SWITCHES_VADDR	(XTFPGA_FPGAREGS_VADDR + 0x0C)
+/* Software reset (write 0xdead):  */
+#define XTFPGA_SWRST_VADDR	(XTFPGA_FPGAREGS_VADDR + 0x10)
+
+/*  OpenCores Ethernet controller:  */
+				/* regs + RX/TX descriptors */
+#define OETH_REGS_PADDR		(XCHAL_KIO_PADDR + 0x0D030000)
+#define OETH_REGS_SIZE		0x1000
+#define OETH_SRAMBUFF_PADDR	(XCHAL_KIO_PADDR + 0x0D800000)
+
+				/* 5*rx buffs + 5*tx buffs */
+#define OETH_SRAMBUFF_SIZE	(5 * 0x600 + 5 * 0x600)
+
+#define C67X00_PADDR		(XCHAL_KIO_PADDR + 0x0D0D0000)
+#define C67X00_SIZE		0x10
+
+#endif /* __XTENSA_XTAVNET_HARDWARE_H */

linux-7.2.3/arch/xtensa/platforms/xtfpga/include/platform/lcd.h

@@ -0,0 +1,35 @@
+/*
+ * arch/xtensa/platform/xtavnet/include/platform/lcd.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001, 2006 Tensilica Inc.
+ */
+
+#ifndef __XTENSA_XTAVNET_LCD_H
+#define __XTENSA_XTAVNET_LCD_H
+
+#ifdef CONFIG_XTFPGA_LCD
+/* Display string STR at position POS on the LCD. */
+void lcd_disp_at_pos(char *str, unsigned char pos);
+
+/* Shift the contents of the LCD display left or right. */
+void lcd_shiftleft(void);
+void lcd_shiftright(void);
+#else
+static inline void lcd_disp_at_pos(char *str, unsigned char pos)
+{
+}
+
+static inline void lcd_shiftleft(void)
+{
+}
+
+static inline void lcd_shiftright(void)
+{
+}
+#endif
+
+#endif

linux-7.2.3/arch/xtensa/platforms/xtfpga/include/platform/serial.h

@@ -0,0 +1,18 @@
+/*
+ * arch/xtensa/platform/xtavnet/include/platform/serial.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001, 2006 Tensilica Inc.
+ */
+
+#ifndef __ASM_XTENSA_XTAVNET_SERIAL_H
+#define __ASM_XTENSA_XTAVNET_SERIAL_H
+
+#include <platform/hardware.h>
+
+#define BASE_BAUD (*(long *)XTFPGA_CLKFRQ_VADDR / 16)
+
+#endif /* __ASM_XTENSA_XTAVNET_SERIAL_H */

linux-7.2.3/arch/xtensa/platforms/xtfpga/lcd.c

@@ -0,0 +1,89 @@
+/*
+ * Driver for the LCD display on the Tensilica XTFPGA board family.
+ * http://www.mytechcorp.com/cfdata/productFile/File1/MOC-16216B-B-A0A04.pdf
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001, 2006 Tensilica Inc.
+ * Copyright (C) 2015 Cadence Design Systems Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <platform/hardware.h>
+#include <platform/lcd.h>
+
+/* LCD instruction and data addresses. */
+#define LCD_INSTR_ADDR		((char *)IOADDR(CONFIG_XTFPGA_LCD_BASE_ADDR))
+#define LCD_DATA_ADDR		(LCD_INSTR_ADDR + 4)
+
+#define LCD_CLEAR		0x1
+#define LCD_DISPLAY_ON		0xc
+
+/* 8bit and 2 lines display */
+#define LCD_DISPLAY_MODE8BIT	0x38
+#define LCD_DISPLAY_MODE4BIT	0x28
+#define LCD_DISPLAY_POS		0x80
+#define LCD_SHIFT_LEFT		0x18
+#define LCD_SHIFT_RIGHT		0x1c
+
+static void lcd_put_byte(u8 *addr, u8 data)
+{
+#ifdef CONFIG_XTFPGA_LCD_8BIT_ACCESS
+	WRITE_ONCE(*addr, data);
+#else
+	WRITE_ONCE(*addr, data & 0xf0);
+	WRITE_ONCE(*addr, (data << 4) & 0xf0);
+#endif
+}
+
+static int __init lcd_init(void)
+{
+	WRITE_ONCE(*LCD_INSTR_ADDR, LCD_DISPLAY_MODE8BIT);
+	mdelay(5);
+	WRITE_ONCE(*LCD_INSTR_ADDR, LCD_DISPLAY_MODE8BIT);
+	udelay(200);
+	WRITE_ONCE(*LCD_INSTR_ADDR, LCD_DISPLAY_MODE8BIT);
+	udelay(50);
+#ifndef CONFIG_XTFPGA_LCD_8BIT_ACCESS
+	WRITE_ONCE(*LCD_INSTR_ADDR, LCD_DISPLAY_MODE4BIT);
+	udelay(50);
+	lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_MODE4BIT);
+	udelay(50);
+#endif
+	lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_ON);
+	udelay(50);
+	lcd_put_byte(LCD_INSTR_ADDR, LCD_CLEAR);
+	mdelay(10);
+	lcd_disp_at_pos("XTENSA LINUX", 0);
+	return 0;
+}
+
+void lcd_disp_at_pos(char *str, unsigned char pos)
+{
+	lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_POS | pos);
+	udelay(100);
+	while (*str != 0) {
+		lcd_put_byte(LCD_DATA_ADDR, *str);
+		udelay(200);
+		str++;
+	}
+}
+
+void lcd_shiftleft(void)
+{
+	lcd_put_byte(LCD_INSTR_ADDR, LCD_SHIFT_LEFT);
+	udelay(50);
+}
+
+void lcd_shiftright(void)
+{
+	lcd_put_byte(LCD_INSTR_ADDR, LCD_SHIFT_RIGHT);
+	udelay(50);
+}
+
+arch_initcall(lcd_init);

linux-7.2.3/arch/xtensa/platforms/xtfpga/setup.c

@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ * arch/xtensa/platform/xtavnet/setup.c
+ *
+ * ...
+ *
+ * Authors:	Chris Zankel <chris@zankel.net>
+ *		Joe Taylor <joe@tensilica.com>
+ *
+ * Copyright 2001 - 2006 Tensilica Inc.
+ */
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include <asm/timex.h>
+#include <asm/processor.h>
+#include <asm/platform.h>
+#include <asm/bootparam.h>
+#include <platform/lcd.h>
+#include <platform/hardware.h>
+
+static int xtfpga_power_off(struct sys_off_data *unused)
+{
+	lcd_disp_at_pos("POWEROFF", 0);
+	local_irq_disable();
+	while (1)
+		cpu_relax();
+	return NOTIFY_DONE;
+}
+
+static int xtfpga_restart(struct sys_off_data *unused)
+{
+	/* Try software reset first. */
+	WRITE_ONCE(*(u32 *)XTFPGA_SWRST_VADDR, 0xdead);
+
+	/* If software reset did not work, flush and reset the mmu,
+	 * simulate a processor reset, and jump to the reset vector.
+	 */
+	cpu_reset();
+
+	return NOTIFY_DONE;
+}
+
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
+
+void __init platform_calibrate_ccount(void)
+{
+	ccount_freq = *(long *)XTFPGA_CLKFRQ_VADDR;
+}
+
+#endif
+
+static void __init xtfpga_register_handlers(void)
+{
+	register_sys_off_handler(SYS_OFF_MODE_RESTART,
+				 SYS_OFF_PRIO_PLATFORM,
+				 xtfpga_restart, NULL);
+	register_sys_off_handler(SYS_OFF_MODE_POWER_OFF,
+				 SYS_OFF_PRIO_DEFAULT,
+				 xtfpga_power_off, NULL);
+}
+
+#ifdef CONFIG_USE_OF
+
+static void __init xtfpga_clk_setup(struct device_node *np)
+{
+	void __iomem *base = of_iomap(np, 0);
+	struct clk *clk;
+	u32 freq;
+
+	if (!base) {
+		pr_err("%pOFn: invalid address\n", np);
+		return;
+	}
+
+	freq = __raw_readl(base);
+	iounmap(base);
+	clk = clk_register_fixed_rate(NULL, np->name, NULL, 0, freq);
+
+	if (IS_ERR(clk)) {
+		pr_err("%pOFn: clk registration failed\n", np);
+		return;
+	}
+
+	if (of_clk_add_provider(np, of_clk_src_simple_get, clk)) {
+		pr_err("%pOFn: clk provider registration failed\n", np);
+		return;
+	}
+}
+CLK_OF_DECLARE(xtfpga_clk, "cdns,xtfpga-clock", xtfpga_clk_setup);
+
+#define MAC_LEN 6
+static void __init update_local_mac(struct device_node *node)
+{
+	struct property *newmac;
+	const u8* macaddr;
+	int prop_len;
+
+	macaddr = of_get_property(node, "local-mac-address", &prop_len);
+	if (macaddr == NULL || prop_len != MAC_LEN)
+		return;
+
+	newmac = kzalloc(sizeof(*newmac) + MAC_LEN, GFP_KERNEL);
+	if (newmac == NULL)
+		return;
+
+	newmac->value = newmac + 1;
+	newmac->length = MAC_LEN;
+	newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+	if (newmac->name == NULL) {
+		kfree(newmac);
+		return;
+	}
+
+	memcpy(newmac->value, macaddr, MAC_LEN);
+	((u8*)newmac->value)[5] = (*(u32*)DIP_SWITCHES_VADDR) & 0x3f;
+	of_update_property(node, newmac);
+}
+
+static int __init machine_setup(void)
+{
+	struct device_node *eth = NULL;
+
+	if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc")))
+		update_local_mac(eth);
+	of_node_put(eth);
+
+	xtfpga_register_handlers();
+
+	return 0;
+}
+arch_initcall(machine_setup);
+
+#else
+
+#include <linux/serial_8250.h>
+#include <linux/if.h>
+#include <net/ethoc.h>
+#include <linux/usb/c67x00.h>
+
+/*----------------------------------------------------------------------------
+ *  Ethernet -- OpenCores Ethernet MAC (ethoc driver)
+ */
+
+static struct resource ethoc_res[] = {
+	[0] = { /* register space */
+		.start = OETH_REGS_PADDR,
+		.end   = OETH_REGS_PADDR + OETH_REGS_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = { /* buffer space */
+		.start = OETH_SRAMBUFF_PADDR,
+		.end   = OETH_SRAMBUFF_PADDR + OETH_SRAMBUFF_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = { /* IRQ number */
+		.start = XTENSA_PIC_LINUX_IRQ(OETH_IRQ),
+		.end   = XTENSA_PIC_LINUX_IRQ(OETH_IRQ),
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct ethoc_platform_data ethoc_pdata = {
+	/*
+	 * The MAC address for these boards is 00:50:c2:13:6f:xx.
+	 * The last byte (here as zero) is read from the DIP switches on the
+	 * board.
+	 */
+	.hwaddr = { 0x00, 0x50, 0xc2, 0x13, 0x6f, 0 },
+	.phy_id = -1,
+	.big_endian = XCHAL_HAVE_BE,
+};
+
+static struct platform_device ethoc_device = {
+	.name = "ethoc",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(ethoc_res),
+	.resource = ethoc_res,
+	.dev = {
+		.platform_data = &ethoc_pdata,
+	},
+};
+
+/*----------------------------------------------------------------------------
+ *  USB Host/Device -- Cypress CY7C67300
+ */
+
+static struct resource c67x00_res[] = {
+	[0] = { /* register space */
+		.start = C67X00_PADDR,
+		.end   = C67X00_PADDR + C67X00_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = { /* IRQ number */
+		.start = XTENSA_PIC_LINUX_IRQ(C67X00_IRQ),
+		.end   = XTENSA_PIC_LINUX_IRQ(C67X00_IRQ),
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct c67x00_platform_data c67x00_pdata = {
+	.sie_config = C67X00_SIE1_HOST | C67X00_SIE2_UNUSED,
+	.hpi_regstep = 4,
+};
+
+static struct platform_device c67x00_device = {
+	.name = "c67x00",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(c67x00_res),
+	.resource = c67x00_res,
+	.dev = {
+		.platform_data = &c67x00_pdata,
+	},
+};
+
+/*----------------------------------------------------------------------------
+ *  UART
+ */
+
+static struct resource serial_resource = {
+	.start	= DUART16552_PADDR,
+	.end	= DUART16552_PADDR + 0x1f,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	[0] = {
+		.mapbase	= DUART16552_PADDR,
+		.irq		= XTENSA_PIC_LINUX_IRQ(DUART16552_INTNUM),
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= XCHAL_HAVE_BE ? UPIO_MEM32BE : UPIO_MEM32,
+		.regshift	= 2,
+		.uartclk	= 0,    /* set in xtavnet_init() */
+	},
+	{ },
+};
+
+static struct platform_device xtavnet_uart = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data	= serial_platform_data,
+	},
+	.num_resources	= 1,
+	.resource	= &serial_resource,
+};
+
+/* platform devices */
+static struct platform_device *platform_devices[] __initdata = {
+	&ethoc_device,
+	&c67x00_device,
+	&xtavnet_uart,
+};
+
+
+static int __init xtavnet_init(void)
+{
+	/* Ethernet MAC address.  */
+	ethoc_pdata.hwaddr[5] = *(u32 *)DIP_SWITCHES_VADDR;
+
+	/* Clock rate varies among FPGA bitstreams; board specific FPGA register
+	 * reports the actual clock rate.
+	 */
+	serial_platform_data[0].uartclk = *(long *)XTFPGA_CLKFRQ_VADDR;
+
+
+	/* register platform devices */
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+	/* ETHOC driver is a bit quiet; at least display Ethernet MAC, so user
+	 * knows whether they set it correctly on the DIP switches.
+	 */
+	pr_info("XTFPGA: Ethernet MAC %pM\n", ethoc_pdata.hwaddr);
+	ethoc_pdata.eth_clkfreq = *(long *)XTFPGA_CLKFRQ_VADDR;
+
+	xtfpga_register_handlers();
+
+	return 0;
+}
+
+/*
+ * Register to be done during do_initcalls().
+ */
+arch_initcall(xtavnet_init);
+
+#endif /* CONFIG_USE_OF */