Resguardo inicial

linux-7.2.3/drivers/clk/pxa/Makefile

@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y				+= clk-pxa.o
+obj-$(CONFIG_PXA25x)		+= clk-pxa25x.o
+obj-$(CONFIG_PXA27x)		+= clk-pxa27x.o
+obj-$(CONFIG_PXA3xx)		+= clk-pxa3xx.o

linux-7.2.3/drivers/clk/pxa/clk-pxa.c

@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Marvell PXA family clocks
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * Common clock code for PXA clocks ("CKEN" type clocks + DT)
+ */
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/soc/pxa/smemc.h>
+
+#include <dt-bindings/clock/pxa-clock.h>
+#include "clk-pxa.h"
+
+#define KHz 1000
+#define MHz (1000 * 1000)
+
+#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
+#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
+#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
+#define MDREFR_DB2_MASK	(MDREFR_K2DB2 | MDREFR_K1DB2)
+#define MDREFR_DRI_MASK	0xFFF
+
+static DEFINE_SPINLOCK(pxa_clk_lock);
+
+static struct clk *pxa_clocks[CLK_MAX];
+static struct clk_onecell_data onecell_data = {
+	.clks = pxa_clocks,
+	.clk_num = CLK_MAX,
+};
+
+struct pxa_clk {
+	struct clk_hw hw;
+	struct clk_fixed_factor lp;
+	struct clk_fixed_factor hp;
+	struct clk_gate gate;
+	bool (*is_in_low_power)(void);
+};
+
+#define to_pxa_clk(_hw) container_of(_hw, struct pxa_clk, hw)
+
+static unsigned long cken_recalc_rate(struct clk_hw *hw,
+				      unsigned long parent_rate)
+{
+	struct pxa_clk *pclk = to_pxa_clk(hw);
+	struct clk_fixed_factor *fix;
+
+	if (!pclk->is_in_low_power || pclk->is_in_low_power())
+		fix = &pclk->lp;
+	else
+		fix = &pclk->hp;
+	__clk_hw_set_clk(&fix->hw, hw);
+	return clk_fixed_factor_ops.recalc_rate(&fix->hw, parent_rate);
+}
+
+static const struct clk_ops cken_rate_ops = {
+	.recalc_rate = cken_recalc_rate,
+};
+
+static u8 cken_get_parent(struct clk_hw *hw)
+{
+	struct pxa_clk *pclk = to_pxa_clk(hw);
+
+	if (!pclk->is_in_low_power)
+		return 0;
+	return pclk->is_in_low_power() ? 0 : 1;
+}
+
+static const struct clk_ops cken_mux_ops = {
+	.determine_rate = clk_hw_determine_rate_no_reparent,
+	.get_parent = cken_get_parent,
+	.set_parent = dummy_clk_set_parent,
+};
+
+void __init clkdev_pxa_register(int ckid, const char *con_id,
+				const char *dev_id, struct clk *clk)
+{
+	if (!IS_ERR(clk) && (ckid != CLK_NONE))
+		pxa_clocks[ckid] = clk;
+	if (!IS_ERR(clk))
+		clk_register_clkdev(clk, con_id, dev_id);
+}
+
+int __init clk_pxa_cken_init(const struct desc_clk_cken *clks,
+			     int nb_clks, void __iomem *clk_regs)
+{
+	int i;
+	struct pxa_clk *pxa_clk;
+	struct clk *clk;
+
+	for (i = 0; i < nb_clks; i++) {
+		pxa_clk = kzalloc_obj(*pxa_clk);
+		if (!pxa_clk)
+			return -ENOMEM;
+		pxa_clk->is_in_low_power = clks[i].is_in_low_power;
+		pxa_clk->lp = clks[i].lp;
+		pxa_clk->hp = clks[i].hp;
+		pxa_clk->gate = clks[i].gate;
+		pxa_clk->gate.reg = clk_regs + clks[i].cken_reg;
+		pxa_clk->gate.lock = &pxa_clk_lock;
+		clk = clk_register_composite(NULL, clks[i].name,
+					     clks[i].parent_names, 2,
+					     &pxa_clk->hw, &cken_mux_ops,
+					     &pxa_clk->hw, &cken_rate_ops,
+					     &pxa_clk->gate.hw, &clk_gate_ops,
+					     clks[i].flags);
+		clkdev_pxa_register(clks[i].ckid, clks[i].con_id,
+				    clks[i].dev_id, clk);
+	}
+	return 0;
+}
+
+void __init clk_pxa_dt_common_init(struct device_node *np)
+{
+	of_clk_add_provider(np, of_clk_src_onecell_get, &onecell_data);
+}
+
+void pxa2xx_core_turbo_switch(bool on)
+{
+	unsigned long flags;
+	unsigned int unused, clkcfg;
+
+	local_irq_save(flags);
+
+	asm("mrc p14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
+	clkcfg &= ~CLKCFG_TURBO & ~CLKCFG_HALFTURBO;
+	if (on)
+		clkcfg |= CLKCFG_TURBO;
+	clkcfg |= CLKCFG_FCS;
+
+	asm volatile(
+	"	b	2f\n"
+	"	.align	5\n"
+	"1:	mcr	p14, 0, %1, c6, c0, 0\n"
+	"	b	3f\n"
+	"2:	b	1b\n"
+	"3:	nop\n"
+		: "=&r" (unused) : "r" (clkcfg));
+
+	local_irq_restore(flags);
+}
+
+void pxa2xx_cpll_change(struct pxa2xx_freq *freq,
+			u32 (*mdrefr_dri)(unsigned int),
+			void __iomem *cccr)
+{
+	unsigned int clkcfg = freq->clkcfg;
+	unsigned int unused, preset_mdrefr, postset_mdrefr;
+	unsigned long flags;
+	void __iomem *mdrefr = pxa_smemc_get_mdrefr();
+
+	local_irq_save(flags);
+
+	/* Calculate the next MDREFR.  If we're slowing down the SDRAM clock
+	 * we need to preset the smaller DRI before the change.	 If we're
+	 * speeding up we need to set the larger DRI value after the change.
+	 */
+	preset_mdrefr = postset_mdrefr = readl(mdrefr);
+	if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(freq->membus_khz)) {
+		preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
+		preset_mdrefr |= mdrefr_dri(freq->membus_khz);
+	}
+	postset_mdrefr =
+		(postset_mdrefr & ~MDREFR_DRI_MASK) |
+		mdrefr_dri(freq->membus_khz);
+
+	/* If we're dividing the memory clock by two for the SDRAM clock, this
+	 * must be set prior to the change.  Clearing the divide must be done
+	 * after the change.
+	 */
+	if (freq->div2) {
+		preset_mdrefr  |= MDREFR_DB2_MASK;
+		postset_mdrefr |= MDREFR_DB2_MASK;
+	} else {
+		postset_mdrefr &= ~MDREFR_DB2_MASK;
+	}
+
+	/* Set new the CCCR and prepare CLKCFG */
+	writel(freq->cccr, cccr);
+
+	asm volatile(
+	"	ldr	r4, [%1]\n"
+	"	b	2f\n"
+	"	.align	5\n"
+	"1:	str	%3, [%1]		/* preset the MDREFR */\n"
+	"	mcr	p14, 0, %2, c6, c0, 0	/* set CLKCFG[FCS] */\n"
+	"	str	%4, [%1]		/* postset the MDREFR */\n"
+	"	b	3f\n"
+	"2:	b	1b\n"
+	"3:	nop\n"
+	     : "=&r" (unused)
+	     : "r" (mdrefr), "r" (clkcfg), "r" (preset_mdrefr),
+	       "r" (postset_mdrefr)
+	     : "r4", "r5");
+
+	local_irq_restore(flags);
+}
+
+int pxa2xx_determine_rate(struct clk_rate_request *req,
+			  struct pxa2xx_freq *freqs, int nb_freqs)
+{
+	int i, closest_below = -1, closest_above = -1;
+	unsigned long rate;
+
+	for (i = 0; i < nb_freqs; i++) {
+		rate = freqs[i].cpll;
+		if (rate == req->rate)
+			break;
+		if (rate < req->min_rate)
+			continue;
+		if (rate > req->max_rate)
+			continue;
+		if (rate <= req->rate)
+			closest_below = i;
+		if ((rate >= req->rate) && (closest_above == -1))
+			closest_above = i;
+	}
+
+	req->best_parent_hw = NULL;
+
+	if (i < nb_freqs) {
+		rate = req->rate;
+	} else if (closest_below >= 0) {
+		rate = freqs[closest_below].cpll;
+	} else if (closest_above >= 0) {
+		rate = freqs[closest_above].cpll;
+	} else {
+		pr_debug("%s(rate=%lu) no match\n", __func__, req->rate);
+		return -EINVAL;
+	}
+
+	pr_debug("%s(rate=%lu) rate=%lu\n", __func__, req->rate, rate);
+	req->rate = rate;
+
+	return 0;
+}

linux-7.2.3/drivers/clk/pxa/clk-pxa.h

@@ -0,0 +1,162 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Marvell PXA family clocks
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * Common clock code for PXA clocks ("CKEN" type clocks + DT)
+ */
+#ifndef _CLK_PXA_
+#define _CLK_PXA_
+
+#define CLKCFG_TURBO		0x1
+#define CLKCFG_FCS		0x2
+#define CLKCFG_HALFTURBO	0x4
+#define CLKCFG_FASTBUS		0x8
+
+#define PARENTS(name) \
+	static const char *const name ## _parents[] __initconst
+#define MUX_RO_RATE_RO_OPS(name, clk_name)			\
+	static struct clk_hw name ## _mux_hw;			\
+	static struct clk_hw name ## _rate_hw;			\
+	static const struct clk_ops name ## _mux_ops = {	\
+		.get_parent = name ## _get_parent,		\
+		.set_parent = dummy_clk_set_parent,		\
+	};							\
+	static const struct clk_ops name ## _rate_ops = {	\
+		.recalc_rate = name ## _get_rate,		\
+	};							\
+	static struct clk * __init clk_register_ ## name(void)	\
+	{							\
+		return clk_register_composite(NULL, clk_name,	\
+			name ## _parents,			\
+			ARRAY_SIZE(name ## _parents),		\
+			&name ## _mux_hw, &name ## _mux_ops,	\
+			&name ## _rate_hw, &name ## _rate_ops,	\
+			NULL, NULL, CLK_GET_RATE_NOCACHE);	\
+	}
+
+#define RATE_RO_OPS(name, clk_name)				\
+	static struct clk_hw name ## _rate_hw;			\
+	static const struct clk_ops name ## _rate_ops = {	\
+		.recalc_rate = name ## _get_rate,		\
+	};							\
+	static struct clk * __init clk_register_ ## name(void)	\
+	{							\
+		return clk_register_composite(NULL, clk_name,	\
+			name ## _parents,			\
+			ARRAY_SIZE(name ## _parents),		\
+			NULL, NULL,				\
+			&name ## _rate_hw, &name ## _rate_ops,	\
+			NULL, NULL, CLK_GET_RATE_NOCACHE);	\
+	}
+
+#define RATE_OPS(name, clk_name)				\
+	static struct clk_hw name ## _rate_hw;			\
+	static const struct clk_ops name ## _rate_ops = {	\
+		.recalc_rate = name ## _get_rate,		\
+		.set_rate = name ## _set_rate,			\
+		.determine_rate = name ## _determine_rate,	\
+	};							\
+	static struct clk * __init clk_register_ ## name(void)	\
+	{							\
+		return clk_register_composite(NULL, clk_name,	\
+			name ## _parents,			\
+			ARRAY_SIZE(name ## _parents),		\
+			NULL, NULL,				\
+			&name ## _rate_hw, &name ## _rate_ops,	\
+			NULL, NULL, CLK_GET_RATE_NOCACHE);	\
+	}
+
+#define MUX_OPS(name, clk_name, flags)				\
+	static struct clk_hw name ## _mux_hw;			\
+	static const struct clk_ops name ## _mux_ops = {	\
+		.get_parent = name ## _get_parent,		\
+		.set_parent = name ## _set_parent,		\
+		.determine_rate = name ## _determine_rate,	\
+	};							\
+	static struct clk * __init clk_register_ ## name(void)	\
+	{							\
+		return clk_register_composite(NULL, clk_name,	\
+			name ## _parents,			\
+			ARRAY_SIZE(name ## _parents),		\
+			&name ## _mux_hw, &name ## _mux_ops,	\
+			NULL, NULL,				\
+			NULL, NULL,				\
+			CLK_GET_RATE_NOCACHE | flags); \
+	}
+
+/*
+ * CKEN clock type
+ * This clock takes it source from 2 possible parents :
+ *  - a low power parent
+ *  - a normal parent
+ *
+ *  +------------+     +-----------+
+ *  |  Low Power | --- | x mult_lp |
+ *  |    Clock   |     | / div_lp  |\
+ *  +------------+     +-----------+ \+-----+   +-----------+
+ *                                    | Mux |---| CKEN gate |
+ *  +------------+     +-----------+ /+-----+   +-----------+
+ *  | High Power |     | x mult_hp |/
+ *  |    Clock   | --- | / div_hp  |
+ *  +------------+     +-----------+
+ */
+struct desc_clk_cken {
+	struct clk_hw hw;
+	int ckid;
+	int cken_reg;
+	const char *name;
+	const char *dev_id;
+	const char *con_id;
+	const char * const *parent_names;
+	struct clk_fixed_factor lp;
+	struct clk_fixed_factor hp;
+	struct clk_gate gate;
+	bool (*is_in_low_power)(void);
+	const unsigned long flags;
+};
+
+#define PXA_CKEN(_dev_id, _con_id, _name, parents, _mult_lp, _div_lp,	\
+		 _mult_hp, _div_hp, is_lp, _cken_reg, _cken_bit, flag)	\
+	{ .ckid = CLK_ ## _name, .name = #_name,			\
+	  .cken_reg = _cken_reg,					\
+	  .dev_id = _dev_id, .con_id = _con_id,	.parent_names = parents,\
+	  .lp = { .mult = _mult_lp, .div = _div_lp },			\
+	  .hp = { .mult = _mult_hp, .div = _div_hp },			\
+	  .is_in_low_power = is_lp,					\
+	  .gate = { .bit_idx = _cken_bit }, \
+	  .flags = flag,						\
+	}
+#define PXA_CKEN_1RATE(dev_id, con_id, name, parents, cken_reg,		\
+			    cken_bit, flag)				\
+	PXA_CKEN(dev_id, con_id, name, parents, 1, 1, 1, 1,		\
+		 NULL, cken_reg, cken_bit, flag)
+
+struct pxa2xx_freq {
+	unsigned long cpll;
+	unsigned int membus_khz;
+	unsigned int cccr;
+	unsigned int div2;
+	unsigned int clkcfg;
+};
+
+static inline int dummy_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+	return 0;
+}
+
+extern void clkdev_pxa_register(int ckid, const char *con_id,
+				const char *dev_id, struct clk *clk);
+extern int clk_pxa_cken_init(const struct desc_clk_cken *clks,
+			     int nb_clks, void __iomem *clk_regs);
+void clk_pxa_dt_common_init(struct device_node *np);
+
+void pxa2xx_core_turbo_switch(bool on);
+void pxa2xx_cpll_change(struct pxa2xx_freq *freq,
+			u32 (*mdrefr_dri)(unsigned int),
+			void __iomem *cccr);
+int pxa2xx_determine_rate(struct clk_rate_request *req,
+			  struct pxa2xx_freq *freqs,  int nb_freqs);
+
+#endif

linux-7.2.3/drivers/clk/pxa/clk-pxa25x.c

@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Marvell PXA25x family clocks
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * Heavily inspired from former arch/arm/mach-pxa/pxa25x.c.
+ *
+ * For non-devicetree platforms. Once pxa is fully converted to devicetree, this
+ * should go away.
+ */
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/clk/pxa.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/soc/pxa/smemc.h>
+#include <linux/soc/pxa/cpu.h>
+
+#include <dt-bindings/clock/pxa-clock.h>
+#include "clk-pxa.h"
+#include "clk-pxa2xx.h"
+
+#define KHz 1000
+#define MHz (1000 * 1000)
+
+enum {
+	PXA_CORE_RUN = 0,
+	PXA_CORE_TURBO,
+};
+
+#define PXA25x_CLKCFG(T)			\
+	(CLKCFG_FCS |				\
+	 ((T) ? CLKCFG_TURBO : 0))
+#define PXA25x_CCCR(N2, M, L) (N2 << 7 | M << 5 | L)
+
+/* Define the refresh period in mSec for the SDRAM and the number of rows */
+#define SDRAM_TREF	64	/* standard 64ms SDRAM */
+
+/*
+ * Various clock factors driven by the CCCR register.
+ */
+static void __iomem *clk_regs;
+
+/* Crystal Frequency to Memory Frequency Multiplier (L) */
+static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, };
+
+/* Memory Frequency to Run Mode Frequency Multiplier (M) */
+static unsigned char M_clk_mult[4] = { 0, 1, 2, 4 };
+
+/* Run Mode Frequency to Turbo Mode Frequency Multiplier (N) */
+/* Note: we store the value N * 2 here. */
+static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 };
+
+static const char * const get_freq_khz[] = {
+	"core", "run", "cpll", "memory"
+};
+
+static u32 mdrefr_dri(unsigned int freq_khz)
+{
+	u32 interval = freq_khz * SDRAM_TREF / pxa2xx_smemc_get_sdram_rows();
+
+	return interval / 32;
+}
+
+/*
+ * Get the clock frequency as reflected by CCCR and the turbo flag.
+ * We assume these values have been applied via a fcs.
+ * If info is not 0 we also display the current settings.
+ */
+unsigned int pxa25x_get_clk_frequency_khz(int info)
+{
+	struct clk *clk;
+	unsigned long clks[5];
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(get_freq_khz); i++) {
+		clk = clk_get(NULL, get_freq_khz[i]);
+		if (IS_ERR(clk)) {
+			clks[i] = 0;
+		} else {
+			clks[i] = clk_get_rate(clk);
+			clk_put(clk);
+		}
+	}
+
+	if (info) {
+		pr_info("Run Mode clock: %ld.%02ldMHz\n",
+			clks[1] / 1000000, (clks[1] % 1000000) / 10000);
+		pr_info("Turbo Mode clock: %ld.%02ldMHz\n",
+			clks[2] / 1000000, (clks[2] % 1000000) / 10000);
+		pr_info("Memory clock: %ld.%02ldMHz\n",
+			clks[3] / 1000000, (clks[3] % 1000000) / 10000);
+	}
+
+	return (unsigned int)clks[0] / KHz;
+}
+
+static unsigned long clk_pxa25x_memory_get_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	unsigned long cccr = readl(clk_regs + CCCR);
+	unsigned int m = M_clk_mult[(cccr >> 5) & 0x03];
+
+	return parent_rate / m;
+}
+PARENTS(clk_pxa25x_memory) = { "run" };
+RATE_RO_OPS(clk_pxa25x_memory, "memory");
+
+PARENTS(pxa25x_pbus95) = { "ppll_95_85mhz", "ppll_95_85mhz" };
+PARENTS(pxa25x_pbus147) = { "ppll_147_46mhz", "ppll_147_46mhz" };
+PARENTS(pxa25x_osc3) = { "osc_3_6864mhz", "osc_3_6864mhz" };
+
+#define PXA25X_CKEN(dev_id, con_id, parents, mult, div,			\
+		    bit, is_lp, flags)					\
+	PXA_CKEN(dev_id, con_id, bit, parents, mult, div, mult, div,	\
+		 is_lp,  CKEN, CKEN_ ## bit, flags)
+#define PXA25X_PBUS95_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay)	\
+	PXA25X_CKEN(dev_id, con_id, pxa25x_pbus95_parents, mult_hp,	\
+		    div_hp, bit, NULL, 0)
+#define PXA25X_PBUS147_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay)\
+	PXA25X_CKEN(dev_id, con_id, pxa25x_pbus147_parents, mult_hp,	\
+		    div_hp, bit, NULL, 0)
+#define PXA25X_OSC3_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay)	\
+	PXA25X_CKEN(dev_id, con_id, pxa25x_osc3_parents, mult_hp,	\
+		    div_hp, bit, NULL, 0)
+
+#define PXA25X_CKEN_1RATE(dev_id, con_id, bit, parents, delay)		\
+	PXA_CKEN_1RATE(dev_id, con_id, bit, parents,			\
+		       CKEN, CKEN_ ## bit, 0)
+#define PXA25X_CKEN_1RATE_AO(dev_id, con_id, bit, parents, delay)	\
+	PXA_CKEN_1RATE(dev_id, con_id, bit, parents,			\
+		       CKEN, CKEN_ ## bit, CLK_IGNORE_UNUSED)
+
+static struct desc_clk_cken pxa25x_clocks[] __initdata = {
+	PXA25X_PBUS95_CKEN("pxa2xx-mci.0", NULL, MMC, 1, 5, 0),
+	PXA25X_PBUS95_CKEN("pxa2xx-i2c.0", NULL, I2C, 1, 3, 0),
+	PXA25X_PBUS95_CKEN("pxa2xx-ir", "FICPCLK", FICP, 1, 2, 0),
+	PXA25X_PBUS95_CKEN("pxa25x-udc", NULL, USB, 1, 2, 5),
+	PXA25X_PBUS147_CKEN("pxa2xx-uart.0", NULL, FFUART, 1, 10, 1),
+	PXA25X_PBUS147_CKEN("pxa2xx-uart.1", NULL, BTUART, 1, 10, 1),
+	PXA25X_PBUS147_CKEN("pxa2xx-uart.2", NULL, STUART, 1, 10, 1),
+	PXA25X_PBUS147_CKEN("pxa2xx-uart.3", NULL, HWUART, 1, 10, 1),
+	PXA25X_PBUS147_CKEN("pxa2xx-i2s", NULL, I2S, 1, 10, 0),
+	PXA25X_PBUS147_CKEN(NULL, "AC97CLK", AC97, 1, 12, 0),
+	PXA25X_OSC3_CKEN("pxa25x-ssp.0", NULL, SSP, 1, 1, 0),
+	PXA25X_OSC3_CKEN("pxa25x-nssp.1", NULL, NSSP, 1, 1, 0),
+	PXA25X_OSC3_CKEN("pxa25x-nssp.2", NULL, ASSP, 1, 1, 0),
+	PXA25X_OSC3_CKEN("pxa25x-pwm.0", NULL, PWM0, 1, 1, 0),
+	PXA25X_OSC3_CKEN("pxa25x-pwm.1", NULL, PWM1, 1, 1, 0),
+
+	PXA25X_CKEN_1RATE("pxa2xx-fb", NULL, LCD, clk_pxa25x_memory_parents, 0),
+	PXA25X_CKEN_1RATE_AO("pxa2xx-pcmcia", NULL, MEMC,
+			     clk_pxa25x_memory_parents, 0),
+};
+
+/*
+ * In this table, PXA25x_CCCR(N2, M, L) has the following meaning, where :
+ *   - freq_cpll = n * m * L * 3.6864 MHz
+ *   - n = N2 / 2
+ *   - m = 2^(M - 1), where 1 <= M <= 3
+ *   - l = L_clk_mult[L], ie. { 0, 27, 32, 36, 40, 45, 0, }[L]
+ */
+static struct pxa2xx_freq pxa25x_freqs[] = {
+	/* CPU  MEMBUS  CCCR                  DIV2 CCLKCFG      */
+	{ 99532800, 99500, PXA25x_CCCR(2,  1, 1),  1, PXA25x_CLKCFG(1)},
+	{199065600, 99500, PXA25x_CCCR(4,  1, 1),  0, PXA25x_CLKCFG(1)},
+	{298598400, 99500, PXA25x_CCCR(3,  2, 1),  0, PXA25x_CLKCFG(1)},
+	{398131200, 99500, PXA25x_CCCR(4,  2, 1),  0, PXA25x_CLKCFG(1)},
+};
+
+static u8 clk_pxa25x_core_get_parent(struct clk_hw *hw)
+{
+	unsigned long clkcfg;
+	unsigned int t;
+
+	asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
+	t  = clkcfg & (1 << 0);
+	if (t)
+		return PXA_CORE_TURBO;
+	return PXA_CORE_RUN;
+}
+
+static int clk_pxa25x_core_set_parent(struct clk_hw *hw, u8 index)
+{
+	if (index > PXA_CORE_TURBO)
+		return -EINVAL;
+
+	pxa2xx_core_turbo_switch(index == PXA_CORE_TURBO);
+
+	return 0;
+}
+
+static int clk_pxa25x_core_determine_rate(struct clk_hw *hw,
+					  struct clk_rate_request *req)
+{
+	return __clk_mux_determine_rate(hw, req);
+}
+
+PARENTS(clk_pxa25x_core) = { "run", "cpll" };
+MUX_OPS(clk_pxa25x_core, "core", CLK_SET_RATE_PARENT);
+
+static unsigned long clk_pxa25x_run_get_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	unsigned long cccr = readl(clk_regs + CCCR);
+	unsigned int n2 = N2_clk_mult[(cccr >> 7) & 0x07];
+
+	return (parent_rate / n2) * 2;
+}
+PARENTS(clk_pxa25x_run) = { "cpll" };
+RATE_RO_OPS(clk_pxa25x_run, "run");
+
+static unsigned long clk_pxa25x_cpll_get_rate(struct clk_hw *hw,
+	unsigned long parent_rate)
+{
+	unsigned long clkcfg, cccr = readl(clk_regs + CCCR);
+	unsigned int l, m, n2, t;
+
+	asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
+	t = clkcfg & (1 << 0);
+	l  =  L_clk_mult[(cccr >> 0) & 0x1f];
+	m = M_clk_mult[(cccr >> 5) & 0x03];
+	n2 = N2_clk_mult[(cccr >> 7) & 0x07];
+
+	return m * l * n2 * parent_rate / 2;
+}
+
+static int clk_pxa25x_cpll_determine_rate(struct clk_hw *hw,
+					  struct clk_rate_request *req)
+{
+	return pxa2xx_determine_rate(req, pxa25x_freqs,
+				     ARRAY_SIZE(pxa25x_freqs));
+}
+
+static int clk_pxa25x_cpll_set_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate)
+{
+	int i;
+
+	pr_debug("%s(rate=%lu parent_rate=%lu)\n", __func__, rate, parent_rate);
+	for (i = 0; i < ARRAY_SIZE(pxa25x_freqs); i++)
+		if (pxa25x_freqs[i].cpll == rate)
+			break;
+
+	if (i >= ARRAY_SIZE(pxa25x_freqs))
+		return -EINVAL;
+
+	pxa2xx_cpll_change(&pxa25x_freqs[i], mdrefr_dri, clk_regs + CCCR);
+
+	return 0;
+}
+PARENTS(clk_pxa25x_cpll) = { "osc_3_6864mhz" };
+RATE_OPS(clk_pxa25x_cpll, "cpll");
+
+static void __init pxa25x_register_core(void)
+{
+	clkdev_pxa_register(CLK_NONE, "cpll", NULL,
+			    clk_register_clk_pxa25x_cpll());
+	clkdev_pxa_register(CLK_NONE, "run", NULL,
+			    clk_register_clk_pxa25x_run());
+	clkdev_pxa_register(CLK_CORE, "core", NULL,
+			    clk_register_clk_pxa25x_core());
+}
+
+static void __init pxa25x_register_plls(void)
+{
+	clk_register_fixed_rate(NULL, "osc_3_6864mhz", NULL,
+				CLK_GET_RATE_NOCACHE, 3686400);
+	clkdev_pxa_register(CLK_OSC32k768, "osc_32_768khz", NULL,
+			    clk_register_fixed_rate(NULL, "osc_32_768khz", NULL,
+						    CLK_GET_RATE_NOCACHE,
+						    32768));
+	clk_register_fixed_rate(NULL, "clk_dummy", NULL, 0, 0);
+	clk_register_fixed_factor(NULL, "ppll_95_85mhz", "osc_3_6864mhz",
+				  0, 26, 1);
+	clk_register_fixed_factor(NULL, "ppll_147_46mhz", "osc_3_6864mhz",
+				  0, 40, 1);
+}
+
+static void __init pxa25x_base_clocks_init(void)
+{
+	pxa25x_register_plls();
+	pxa25x_register_core();
+	clkdev_pxa_register(CLK_NONE, "system_bus", NULL,
+			    clk_register_clk_pxa25x_memory());
+}
+
+#define DUMMY_CLK(_con_id, _dev_id, _parent) \
+	{ .con_id = _con_id, .dev_id = _dev_id, .parent = _parent }
+struct dummy_clk {
+	const char *con_id;
+	const char *dev_id;
+	const char *parent;
+};
+static struct dummy_clk dummy_clks[] __initdata = {
+	DUMMY_CLK(NULL, "pxa25x-gpio", "osc_32_768khz"),
+	DUMMY_CLK(NULL, "pxa26x-gpio", "osc_32_768khz"),
+	DUMMY_CLK("GPIO11_CLK", NULL, "osc_3_6864mhz"),
+	DUMMY_CLK("GPIO12_CLK", NULL, "osc_32_768khz"),
+	DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"),
+	DUMMY_CLK("OSTIMER0", NULL, "osc_3_6864mhz"),
+	DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"),
+};
+
+static void __init pxa25x_dummy_clocks_init(void)
+{
+	struct clk *clk;
+	struct dummy_clk *d;
+	const char *name;
+	int i;
+
+	/*
+	 * All pinctrl logic has been wiped out of the clock driver, especially
+	 * for gpio11 and gpio12 outputs. Machine code should ensure proper pin
+	 * control (ie. pxa2xx_mfp_config() invocation).
+	 */
+	for (i = 0; i < ARRAY_SIZE(dummy_clks); i++) {
+		d = &dummy_clks[i];
+		name = d->dev_id ? d->dev_id : d->con_id;
+		clk = clk_register_fixed_factor(NULL, name, d->parent, 0, 1, 1);
+		clk_register_clkdev(clk, d->con_id, d->dev_id);
+	}
+}
+
+int __init pxa25x_clocks_init(void __iomem *regs)
+{
+	clk_regs = regs;
+	pxa25x_base_clocks_init();
+	pxa25x_dummy_clocks_init();
+	return clk_pxa_cken_init(pxa25x_clocks, ARRAY_SIZE(pxa25x_clocks), clk_regs);
+}
+
+static void __init pxa25x_dt_clocks_init(struct device_node *np)
+{
+	pxa25x_clocks_init(ioremap(0x41300000ul, 0x10));
+	clk_pxa_dt_common_init(np);
+}
+CLK_OF_DECLARE(pxa25x_clks, "marvell,pxa250-core-clocks",
+	       pxa25x_dt_clocks_init);

linux-7.2.3/drivers/clk/pxa/clk-pxa27x.c

@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Marvell PXA27x family clocks
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * Heavily inspired from former arch/arm/mach-pxa/clock.c.
+ */
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/soc/pxa/smemc.h>
+#include <linux/clk/pxa.h>
+
+#include <dt-bindings/clock/pxa-clock.h>
+#include "clk-pxa.h"
+#include "clk-pxa2xx.h"
+
+#define KHz 1000
+#define MHz (1000 * 1000)
+
+enum {
+	PXA_CORE_13Mhz = 0,
+	PXA_CORE_RUN,
+	PXA_CORE_TURBO,
+};
+
+enum {
+	PXA_BUS_13Mhz = 0,
+	PXA_BUS_RUN,
+};
+
+enum {
+	PXA_LCD_13Mhz = 0,
+	PXA_LCD_RUN,
+};
+
+enum {
+	PXA_MEM_13Mhz = 0,
+	PXA_MEM_SYSTEM_BUS,
+	PXA_MEM_RUN,
+};
+
+#define PXA27x_CLKCFG(B, HT, T)			\
+	(CLKCFG_FCS |				\
+	 ((B)  ? CLKCFG_FASTBUS : 0) |		\
+	 ((HT) ? CLKCFG_HALFTURBO : 0) |	\
+	 ((T)  ? CLKCFG_TURBO : 0))
+#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
+
+/* Define the refresh period in mSec for the SDRAM and the number of rows */
+#define SDRAM_TREF	64	/* standard 64ms SDRAM */
+
+static void __iomem *clk_regs;
+
+static const char * const get_freq_khz[] = {
+	"core", "run", "cpll", "memory",
+	"system_bus"
+};
+
+static u32 mdrefr_dri(unsigned int freq_khz)
+{
+	u32 interval = freq_khz * SDRAM_TREF / pxa2xx_smemc_get_sdram_rows();
+
+	return (interval - 31) / 32;
+}
+
+/*
+ * Get the clock frequency as reflected by CCSR and the turbo flag.
+ * We assume these values have been applied via a fcs.
+ * If info is not 0 we also display the current settings.
+ */
+unsigned int pxa27x_get_clk_frequency_khz(int info)
+{
+	struct clk *clk;
+	unsigned long clks[5];
+	int i;
+
+	for (i = 0; i < 5; i++) {
+		clk = clk_get(NULL, get_freq_khz[i]);
+		if (IS_ERR(clk)) {
+			clks[i] = 0;
+		} else {
+			clks[i] = clk_get_rate(clk);
+			clk_put(clk);
+		}
+	}
+	if (info) {
+		pr_info("Run Mode clock: %ld.%02ldMHz\n",
+			clks[1] / 1000000, (clks[1] % 1000000) / 10000);
+		pr_info("Turbo Mode clock: %ld.%02ldMHz\n",
+			clks[2] / 1000000, (clks[2] % 1000000) / 10000);
+		pr_info("Memory clock: %ld.%02ldMHz\n",
+			clks[3] / 1000000, (clks[3] % 1000000) / 10000);
+		pr_info("System bus clock: %ld.%02ldMHz\n",
+			clks[4] / 1000000, (clks[4] % 1000000) / 10000);
+	}
+	return (unsigned int)clks[0] / KHz;
+}
+
+static bool pxa27x_is_ppll_disabled(void)
+{
+	unsigned long ccsr = readl(clk_regs + CCSR);
+
+	return ccsr & (1 << CCCR_PPDIS_BIT);
+}
+
+#define PXA27X_CKEN(dev_id, con_id, parents, mult_hp, div_hp,		\
+		    bit, is_lp, flags)					\
+	PXA_CKEN(dev_id, con_id, bit, parents, 1, 1, mult_hp, div_hp,	\
+		 is_lp,  CKEN, CKEN_ ## bit, flags)
+#define PXA27X_PBUS_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay)	\
+	PXA27X_CKEN(dev_id, con_id, pxa27x_pbus_parents, mult_hp,	\
+		    div_hp, bit, pxa27x_is_ppll_disabled, 0)
+
+PARENTS(pxa27x_pbus) = { "osc_13mhz", "ppll_312mhz" };
+PARENTS(pxa27x_sbus) = { "system_bus", "system_bus" };
+PARENTS(pxa27x_32Mhz_bus) = { "osc_32_768khz", "osc_32_768khz" };
+PARENTS(pxa27x_lcd_bus) = { "lcd_base", "lcd_base" };
+PARENTS(pxa27x_membus) = { "lcd_base", "lcd_base" };
+
+#define PXA27X_CKEN_1RATE(dev_id, con_id, bit, parents, delay)		\
+	PXA_CKEN_1RATE(dev_id, con_id, bit, parents,			\
+		       CKEN, CKEN_ ## bit, 0)
+#define PXA27X_CKEN_1RATE_AO(dev_id, con_id, bit, parents, delay)	\
+	PXA_CKEN_1RATE(dev_id, con_id, bit, parents,			\
+		       CKEN, CKEN_ ## bit, CLK_IGNORE_UNUSED)
+
+static struct desc_clk_cken pxa27x_clocks[] __initdata = {
+	PXA27X_PBUS_CKEN("pxa2xx-uart.0", NULL, FFUART, 2, 42, 1),
+	PXA27X_PBUS_CKEN("pxa2xx-uart.1", NULL, BTUART, 2, 42, 1),
+	PXA27X_PBUS_CKEN("pxa2xx-uart.2", NULL, STUART, 2, 42, 1),
+	PXA27X_PBUS_CKEN("pxa2xx-i2s", NULL, I2S, 2, 51, 0),
+	PXA27X_PBUS_CKEN("pxa2xx-i2c.0", NULL, I2C, 2, 19, 0),
+	PXA27X_PBUS_CKEN("pxa27x-udc", NULL, USB, 2, 13, 5),
+	PXA27X_PBUS_CKEN("pxa2xx-mci.0", NULL, MMC, 2, 32, 0),
+	PXA27X_PBUS_CKEN("pxa2xx-ir", "FICPCLK", FICP, 2, 13, 0),
+	PXA27X_PBUS_CKEN("pxa27x-ohci", NULL, USBHOST, 2, 13, 0),
+	PXA27X_PBUS_CKEN("pxa2xx-i2c.1", NULL, PWRI2C, 1, 24, 0),
+	PXA27X_PBUS_CKEN("pxa27x-ssp.0", NULL, SSP1, 1, 24, 0),
+	PXA27X_PBUS_CKEN("pxa27x-ssp.1", NULL, SSP2, 1, 24, 0),
+	PXA27X_PBUS_CKEN("pxa27x-ssp.2", NULL, SSP3, 1, 24, 0),
+	PXA27X_PBUS_CKEN("pxa27x-pwm.0", NULL, PWM0, 1, 24, 0),
+	PXA27X_PBUS_CKEN("pxa27x-pwm.1", NULL, PWM1, 1, 24, 0),
+	PXA27X_PBUS_CKEN(NULL, "MSLCLK", MSL, 2, 13, 0),
+	PXA27X_PBUS_CKEN(NULL, "USIMCLK", USIM, 2, 13, 0),
+	PXA27X_PBUS_CKEN(NULL, "MSTKCLK", MEMSTK, 2, 32, 0),
+	PXA27X_PBUS_CKEN(NULL, "AC97CLK", AC97, 1, 1, 0),
+	PXA27X_PBUS_CKEN(NULL, "AC97CONFCLK", AC97CONF, 1, 1, 0),
+	PXA27X_PBUS_CKEN(NULL, "OSTIMER0", OSTIMER, 1, 96, 0),
+
+	PXA27X_CKEN_1RATE("pxa27x-keypad", NULL, KEYPAD,
+			  pxa27x_32Mhz_bus_parents, 0),
+	PXA27X_CKEN_1RATE(NULL, "IMCLK", IM, pxa27x_sbus_parents, 0),
+	PXA27X_CKEN_1RATE("pxa2xx-fb", NULL, LCD, pxa27x_lcd_bus_parents, 0),
+	PXA27X_CKEN_1RATE("pxa27x-camera.0", NULL, CAMERA,
+			  pxa27x_lcd_bus_parents, 0),
+	PXA27X_CKEN_1RATE_AO("pxa2xx-pcmcia", NULL, MEMC,
+			     pxa27x_membus_parents, 0),
+
+};
+
+/*
+ * PXA270 definitions
+ *
+ * For the PXA27x:
+ * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
+ *
+ * A = 0 => memory controller clock from table 3-7,
+ * A = 1 => memory controller clock = system bus clock
+ * Run mode frequency	= 13 MHz * L
+ * Turbo mode frequency = 13 MHz * L * N
+ * System bus frequency = 13 MHz * L / (B + 1)
+ *
+ * In CCCR:
+ * A = 1
+ * L = 16	  oscillator to run mode ratio
+ * 2N = 6	  2 * (turbo mode to run mode ratio)
+ *
+ * In CCLKCFG:
+ * B = 1	  Fast bus mode
+ * HT = 0	  Half-Turbo mode
+ * T = 1	  Turbo mode
+ *
+ * For now, just support some of the combinations in table 3-7 of
+ * PXA27x Processor Family Developer's Manual to simplify frequency
+ * change sequences.
+ */
+static struct pxa2xx_freq pxa27x_freqs[] = {
+	{104000000, 104000, PXA27x_CCCR(1,  8, 2), 0, PXA27x_CLKCFG(1, 0, 1) },
+	{156000000, 104000, PXA27x_CCCR(1,  8, 3), 0, PXA27x_CLKCFG(1, 0, 1) },
+	{208000000, 208000, PXA27x_CCCR(0, 16, 2), 1, PXA27x_CLKCFG(0, 0, 1) },
+	{312000000, 208000, PXA27x_CCCR(1, 16, 3), 1, PXA27x_CLKCFG(1, 0, 1) },
+	{416000000, 208000, PXA27x_CCCR(1, 16, 4), 1, PXA27x_CLKCFG(1, 0, 1) },
+	{520000000, 208000, PXA27x_CCCR(1, 16, 5), 1, PXA27x_CLKCFG(1, 0, 1) },
+	{624000000, 208000, PXA27x_CCCR(1, 16, 6), 1, PXA27x_CLKCFG(1, 0, 1) },
+};
+
+static unsigned long clk_pxa27x_cpll_get_rate(struct clk_hw *hw,
+	unsigned long parent_rate)
+{
+	unsigned long clkcfg;
+	unsigned int t, ht;
+	unsigned int l, L, n2, N;
+	unsigned long ccsr = readl(clk_regs + CCSR);
+
+	asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
+	t  = clkcfg & (1 << 0);
+	ht = clkcfg & (1 << 2);
+
+	l  = ccsr & CCSR_L_MASK;
+	n2 = (ccsr & CCSR_N2_MASK) >> CCSR_N2_SHIFT;
+	L  = l * parent_rate;
+	N  = (L * n2) / 2;
+
+	return N;
+}
+
+static int clk_pxa27x_cpll_determine_rate(struct clk_hw *hw,
+					  struct clk_rate_request *req)
+{
+	return pxa2xx_determine_rate(req, pxa27x_freqs,
+				     ARRAY_SIZE(pxa27x_freqs));
+}
+
+static int clk_pxa27x_cpll_set_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate)
+{
+	int i;
+
+	pr_debug("%s(rate=%lu parent_rate=%lu)\n", __func__, rate, parent_rate);
+	for (i = 0; i < ARRAY_SIZE(pxa27x_freqs); i++)
+		if (pxa27x_freqs[i].cpll == rate)
+			break;
+
+	if (i >= ARRAY_SIZE(pxa27x_freqs))
+		return -EINVAL;
+
+	pxa2xx_cpll_change(&pxa27x_freqs[i], mdrefr_dri, clk_regs + CCCR);
+	return 0;
+}
+
+PARENTS(clk_pxa27x_cpll) = { "osc_13mhz" };
+RATE_OPS(clk_pxa27x_cpll, "cpll");
+
+static unsigned long clk_pxa27x_lcd_base_get_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	unsigned int l, osc_forced;
+	unsigned long ccsr = readl(clk_regs + CCSR);
+	unsigned long cccr = readl(clk_regs + CCCR);
+
+	l  = ccsr & CCSR_L_MASK;
+	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
+	if (osc_forced) {
+		if (cccr & (1 << CCCR_LCD_26_BIT))
+			return parent_rate * 2;
+		else
+			return parent_rate;
+	}
+
+	if (l <= 7)
+		return parent_rate;
+	if (l <= 16)
+		return parent_rate / 2;
+	return parent_rate / 4;
+}
+
+static u8 clk_pxa27x_lcd_base_get_parent(struct clk_hw *hw)
+{
+	unsigned int osc_forced;
+	unsigned long ccsr = readl(clk_regs + CCSR);
+
+	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
+	if (osc_forced)
+		return PXA_LCD_13Mhz;
+	else
+		return PXA_LCD_RUN;
+}
+
+PARENTS(clk_pxa27x_lcd_base) = { "osc_13mhz", "run" };
+MUX_RO_RATE_RO_OPS(clk_pxa27x_lcd_base, "lcd_base");
+
+static void __init pxa27x_register_plls(void)
+{
+	clk_register_fixed_rate(NULL, "osc_13mhz", NULL,
+				CLK_GET_RATE_NOCACHE,
+				13 * MHz);
+	clkdev_pxa_register(CLK_OSC32k768, "osc_32_768khz", NULL,
+			    clk_register_fixed_rate(NULL, "osc_32_768khz", NULL,
+						    CLK_GET_RATE_NOCACHE,
+						    32768 * KHz));
+	clk_register_fixed_rate(NULL, "clk_dummy", NULL, 0, 0);
+	clk_register_fixed_factor(NULL, "ppll_312mhz", "osc_13mhz", 0, 24, 1);
+}
+
+static u8 clk_pxa27x_core_get_parent(struct clk_hw *hw)
+{
+	unsigned long clkcfg;
+	unsigned int t, ht, osc_forced;
+	unsigned long ccsr = readl(clk_regs + CCSR);
+
+	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
+	if (osc_forced)
+		return PXA_CORE_13Mhz;
+
+	asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
+	t  = clkcfg & (1 << 0);
+	ht = clkcfg & (1 << 2);
+
+	if (ht || t)
+		return PXA_CORE_TURBO;
+	return PXA_CORE_RUN;
+}
+
+static int clk_pxa27x_core_set_parent(struct clk_hw *hw, u8 index)
+{
+	if (index > PXA_CORE_TURBO)
+		return -EINVAL;
+
+	pxa2xx_core_turbo_switch(index == PXA_CORE_TURBO);
+
+	return 0;
+}
+
+static int clk_pxa27x_core_determine_rate(struct clk_hw *hw,
+					  struct clk_rate_request *req)
+{
+	return __clk_mux_determine_rate(hw, req);
+}
+
+PARENTS(clk_pxa27x_core) = { "osc_13mhz", "run", "cpll" };
+MUX_OPS(clk_pxa27x_core, "core", CLK_SET_RATE_PARENT);
+
+static unsigned long clk_pxa27x_run_get_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	unsigned long ccsr = readl(clk_regs + CCSR);
+	unsigned int n2 = (ccsr & CCSR_N2_MASK) >> CCSR_N2_SHIFT;
+
+	return (parent_rate / n2) * 2;
+}
+PARENTS(clk_pxa27x_run) = { "cpll" };
+RATE_RO_OPS(clk_pxa27x_run, "run");
+
+static void __init pxa27x_register_core(void)
+{
+	clkdev_pxa_register(CLK_NONE, "cpll", NULL,
+			    clk_register_clk_pxa27x_cpll());
+	clkdev_pxa_register(CLK_NONE, "run", NULL,
+			    clk_register_clk_pxa27x_run());
+	clkdev_pxa_register(CLK_CORE, "core", NULL,
+			    clk_register_clk_pxa27x_core());
+}
+
+static unsigned long clk_pxa27x_system_bus_get_rate(struct clk_hw *hw,
+						    unsigned long parent_rate)
+{
+	unsigned long clkcfg;
+	unsigned int b, osc_forced;
+	unsigned long ccsr = readl(clk_regs + CCSR);
+
+	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
+	asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg));
+	b  = clkcfg & (1 << 3);
+
+	if (osc_forced)
+		return parent_rate;
+	if (b)
+		return parent_rate;
+	else
+		return parent_rate / 2;
+}
+
+static u8 clk_pxa27x_system_bus_get_parent(struct clk_hw *hw)
+{
+	unsigned int osc_forced;
+	unsigned long ccsr = readl(clk_regs + CCSR);
+
+	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
+	if (osc_forced)
+		return PXA_BUS_13Mhz;
+	else
+		return PXA_BUS_RUN;
+}
+
+PARENTS(clk_pxa27x_system_bus) = { "osc_13mhz", "run" };
+MUX_RO_RATE_RO_OPS(clk_pxa27x_system_bus, "system_bus");
+
+static unsigned long clk_pxa27x_memory_get_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	unsigned int a, l, osc_forced;
+	unsigned long cccr = readl(clk_regs + CCCR);
+	unsigned long ccsr = readl(clk_regs + CCSR);
+
+	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
+	a = cccr & (1 << CCCR_A_BIT);
+	l  = ccsr & CCSR_L_MASK;
+
+	if (osc_forced || a)
+		return parent_rate;
+	if (l <= 10)
+		return parent_rate;
+	if (l <= 20)
+		return parent_rate / 2;
+	return parent_rate / 4;
+}
+
+static u8 clk_pxa27x_memory_get_parent(struct clk_hw *hw)
+{
+	unsigned int osc_forced, a;
+	unsigned long cccr = readl(clk_regs + CCCR);
+	unsigned long ccsr = readl(clk_regs + CCSR);
+
+	osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
+	a = cccr & (1 << CCCR_A_BIT);
+	if (osc_forced)
+		return PXA_MEM_13Mhz;
+	if (a)
+		return PXA_MEM_SYSTEM_BUS;
+	else
+		return PXA_MEM_RUN;
+}
+
+PARENTS(clk_pxa27x_memory) = { "osc_13mhz", "system_bus", "run" };
+MUX_RO_RATE_RO_OPS(clk_pxa27x_memory, "memory");
+
+#define DUMMY_CLK(_con_id, _dev_id, _parent) \
+	{ .con_id = _con_id, .dev_id = _dev_id, .parent = _parent }
+struct dummy_clk {
+	const char *con_id;
+	const char *dev_id;
+	const char *parent;
+};
+static struct dummy_clk dummy_clks[] __initdata = {
+	DUMMY_CLK(NULL, "pxa27x-gpio", "osc_32_768khz"),
+	DUMMY_CLK(NULL, "pxa-rtc", "osc_32_768khz"),
+	DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"),
+	DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"),
+};
+
+static void __init pxa27x_dummy_clocks_init(void)
+{
+	struct clk *clk;
+	struct dummy_clk *d;
+	const char *name;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(dummy_clks); i++) {
+		d = &dummy_clks[i];
+		name = d->dev_id ? d->dev_id : d->con_id;
+		clk = clk_register_fixed_factor(NULL, name, d->parent, 0, 1, 1);
+		clk_register_clkdev(clk, d->con_id, d->dev_id);
+	}
+}
+
+static void __init pxa27x_base_clocks_init(void)
+{
+	pxa27x_register_plls();
+	pxa27x_register_core();
+	clkdev_pxa_register(CLK_NONE, "system_bus", NULL,
+			    clk_register_clk_pxa27x_system_bus());
+	clkdev_pxa_register(CLK_NONE, "memory", NULL,
+			    clk_register_clk_pxa27x_memory());
+	clk_register_clk_pxa27x_lcd_base();
+}
+
+int __init pxa27x_clocks_init(void __iomem *regs)
+{
+	clk_regs = regs;
+	pxa27x_base_clocks_init();
+	pxa27x_dummy_clocks_init();
+	return clk_pxa_cken_init(pxa27x_clocks, ARRAY_SIZE(pxa27x_clocks), regs);
+}
+
+static void __init pxa27x_dt_clocks_init(struct device_node *np)
+{
+	pxa27x_clocks_init(ioremap(0x41300000ul, 0x10));
+	clk_pxa_dt_common_init(np);
+}
+CLK_OF_DECLARE(pxa_clks, "marvell,pxa270-clocks", pxa27x_dt_clocks_init);

linux-7.2.3/drivers/clk/pxa/clk-pxa2xx.h

@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __CLK_PXA2XX_H
+#define __CLK_PXA2XX_H
+
+#define CCCR		(0x0000)  /* Core Clock Configuration Register */
+#define CCSR		(0x000C)  /* Core Clock Status Register */
+#define CKEN		(0x0004)  /* Clock Enable Register */
+#define OSCC		(0x0008)  /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK	0x001f	/* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CCCR_CPDIS_BIT	(31)
+#define CCCR_PPDIS_BIT	(30)
+#define CCCR_LCD_26_BIT	(27)
+#define CCCR_A_BIT	(25)
+
+#define CCSR_N2_MASK	CCCR_N_MASK
+#define CCSR_M_MASK	CCCR_M_MASK
+#define CCSR_L_MASK	CCCR_L_MASK
+#define CCSR_N2_SHIFT	7
+
+#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
+#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
+#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
+#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
+#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
+#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
+#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
+#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
+#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
+#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
+#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
+#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
+#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
+#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
+#define CKEN_USB	(11)	/* USB Unit Clock Enable */
+#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
+#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
+#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
+#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
+#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
+#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
+#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
+#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
+#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
+#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
+#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
+#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
+
+#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
+
+#endif

linux-7.2.3/drivers/clk/pxa/clk-pxa3xx.c

@@ -0,0 +1,463 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Marvell PXA3xxx family clocks
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * Heavily inspired from former arch/arm/mach-pxa/pxa3xx.c
+ *
+ * For non-devicetree platforms. Once pxa is fully converted to devicetree, this
+ * should go away.
+ */
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/soc/pxa/cpu.h>
+#include <linux/soc/pxa/smemc.h>
+#include <linux/clk/pxa.h>
+
+#include <dt-bindings/clock/pxa-clock.h>
+#include "clk-pxa.h"
+
+#define KHz 1000
+#define MHz (1000 * 1000)
+
+#define ACCR			(0x0000)	/* Application Subsystem Clock Configuration Register */
+#define ACSR			(0x0004)	/* Application Subsystem Clock Status Register */
+#define AICSR			(0x0008)	/* Application Subsystem Interrupt Control/Status Register */
+#define CKENA			(0x000C)	/* A Clock Enable Register */
+#define CKENB			(0x0010)	/* B Clock Enable Register */
+#define CKENC			(0x0024)	/* C Clock Enable Register */
+#define AC97_DIV		(0x0014)	/* AC97 clock divisor value register */
+
+#define ACCR_XPDIS		(1 << 31)	/* Core PLL Output Disable */
+#define ACCR_SPDIS		(1 << 30)	/* System PLL Output Disable */
+#define ACCR_D0CS		(1 << 26)	/* D0 Mode Clock Select */
+#define ACCR_PCCE		(1 << 11)	/* Power Mode Change Clock Enable */
+#define ACCR_DDR_D0CS		(1 << 7)	/* DDR SDRAM clock frequency in D0CS (PXA31x only) */
+
+#define ACCR_SMCFS_MASK		(0x7 << 23)	/* Static Memory Controller Frequency Select */
+#define ACCR_SFLFS_MASK		(0x3 << 18)	/* Frequency Select for Internal Memory Controller */
+#define ACCR_XSPCLK_MASK	(0x3 << 16)	/* Core Frequency during Frequency Change */
+#define ACCR_HSS_MASK		(0x3 << 14)	/* System Bus-Clock Frequency Select */
+#define ACCR_DMCFS_MASK		(0x3 << 12)	/* Dynamic Memory Controller Clock Frequency Select */
+#define ACCR_XN_MASK		(0x7 << 8)	/* Core PLL Turbo-Mode-to-Run-Mode Ratio */
+#define ACCR_XL_MASK		(0x1f)		/* Core PLL Run-Mode-to-Oscillator Ratio */
+
+#define ACCR_SMCFS(x)		(((x) & 0x7) << 23)
+#define ACCR_SFLFS(x)		(((x) & 0x3) << 18)
+#define ACCR_XSPCLK(x)		(((x) & 0x3) << 16)
+#define ACCR_HSS(x)		(((x) & 0x3) << 14)
+#define ACCR_DMCFS(x)		(((x) & 0x3) << 12)
+#define ACCR_XN(x)		(((x) & 0x7) << 8)
+#define ACCR_XL(x)		((x) & 0x1f)
+
+/*
+ * Clock Enable Bit
+ */
+#define CKEN_LCD	1	/* < LCD Clock Enable */
+#define CKEN_USBH	2	/* < USB host clock enable */
+#define CKEN_CAMERA	3	/* < Camera interface clock enable */
+#define CKEN_NAND	4	/* < NAND Flash Controller Clock Enable */
+#define CKEN_USB2	6	/* < USB 2.0 client clock enable. */
+#define CKEN_DMC	8	/* < Dynamic Memory Controller clock enable */
+#define CKEN_SMC	9	/* < Static Memory Controller clock enable */
+#define CKEN_ISC	10	/* < Internal SRAM Controller clock enable */
+#define CKEN_BOOT	11	/* < Boot rom clock enable */
+#define CKEN_MMC1	12	/* < MMC1 Clock enable */
+#define CKEN_MMC2	13	/* < MMC2 clock enable */
+#define CKEN_KEYPAD	14	/* < Keypand Controller Clock Enable */
+#define CKEN_CIR	15	/* < Consumer IR Clock Enable */
+#define CKEN_USIM0	17	/* < USIM[0] Clock Enable */
+#define CKEN_USIM1	18	/* < USIM[1] Clock Enable */
+#define CKEN_TPM	19	/* < TPM clock enable */
+#define CKEN_UDC	20	/* < UDC clock enable */
+#define CKEN_BTUART	21	/* < BTUART clock enable */
+#define CKEN_FFUART	22	/* < FFUART clock enable */
+#define CKEN_STUART	23	/* < STUART clock enable */
+#define CKEN_AC97	24	/* < AC97 clock enable */
+#define CKEN_TOUCH	25	/* < Touch screen Interface Clock Enable */
+#define CKEN_SSP1	26	/* < SSP1 clock enable */
+#define CKEN_SSP2	27	/* < SSP2 clock enable */
+#define CKEN_SSP3	28	/* < SSP3 clock enable */
+#define CKEN_SSP4	29	/* < SSP4 clock enable */
+#define CKEN_MSL0	30	/* < MSL0 clock enable */
+#define CKEN_PWM0	32	/* < PWM[0] clock enable */
+#define CKEN_PWM1	33	/* < PWM[1] clock enable */
+#define CKEN_I2C	36	/* < I2C clock enable */
+#define CKEN_INTC	38	/* < Interrupt controller clock enable */
+#define CKEN_GPIO	39	/* < GPIO clock enable */
+#define CKEN_1WIRE	40	/* < 1-wire clock enable */
+#define CKEN_HSIO2	41	/* < HSIO2 clock enable */
+#define CKEN_MINI_IM	48	/* < Mini-IM */
+#define CKEN_MINI_LCD	49	/* < Mini LCD */
+
+#define CKEN_MMC3	5	/* < MMC3 Clock Enable */
+#define CKEN_MVED	43	/* < MVED clock enable */
+
+/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
+#define CKEN_PXA300_GCU		42	/* Graphics controller clock enable */
+#define CKEN_PXA320_GCU		7	/* Graphics controller clock enable */
+
+
+enum {
+	PXA_CORE_60Mhz = 0,
+	PXA_CORE_RUN,
+	PXA_CORE_TURBO,
+};
+
+enum {
+	PXA_BUS_60Mhz = 0,
+	PXA_BUS_HSS,
+};
+
+/* crystal frequency to HSIO bus frequency multiplier (HSS) */
+static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
+
+/* crystal frequency to static memory controller multiplier (SMCFS) */
+static unsigned int smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
+static const char * const get_freq_khz[] = {
+	"core", "ring_osc_60mhz", "run", "cpll", "system_bus"
+};
+
+static void __iomem *clk_regs;
+
+/*
+ * Get the clock frequency as reflected by ACSR and the turbo flag.
+ * We assume these values have been applied via a fcs.
+ * If info is not 0 we also display the current settings.
+ */
+unsigned int pxa3xx_get_clk_frequency_khz(int info)
+{
+	struct clk *clk;
+	unsigned long clks[5];
+	int i;
+
+	for (i = 0; i < 5; i++) {
+		clk = clk_get(NULL, get_freq_khz[i]);
+		if (IS_ERR(clk)) {
+			clks[i] = 0;
+		} else {
+			clks[i] = clk_get_rate(clk);
+			clk_put(clk);
+		}
+	}
+	if (info) {
+		pr_info("RO Mode clock: %ld.%02ldMHz\n",
+			clks[1] / 1000000, (clks[0] % 1000000) / 10000);
+		pr_info("Run Mode clock: %ld.%02ldMHz\n",
+			clks[2] / 1000000, (clks[1] % 1000000) / 10000);
+		pr_info("Turbo Mode clock: %ld.%02ldMHz\n",
+			clks[3] / 1000000, (clks[2] % 1000000) / 10000);
+		pr_info("System bus clock: %ld.%02ldMHz\n",
+			clks[4] / 1000000, (clks[4] % 1000000) / 10000);
+	}
+	return (unsigned int)clks[0] / KHz;
+}
+
+void pxa3xx_clk_update_accr(u32 disable, u32 enable, u32 xclkcfg, u32 mask)
+{
+	u32 accr = readl(clk_regs + ACCR);
+
+	accr &= ~disable;
+	accr |= enable;
+
+	writel(accr, clk_regs + ACCR);
+	if (xclkcfg)
+		__asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));
+
+	while ((readl(clk_regs + ACSR) & mask) != (accr & mask))
+		cpu_relax();
+}
+
+static unsigned long clk_pxa3xx_ac97_get_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	unsigned long ac97_div, rate;
+
+	ac97_div = readl(clk_regs + AC97_DIV);
+
+	/* This may loose precision for some rates but won't for the
+	 * standard 24.576MHz.
+	 */
+	rate = parent_rate / 2;
+	rate /= ((ac97_div >> 12) & 0x7fff);
+	rate *= (ac97_div & 0xfff);
+
+	return rate;
+}
+PARENTS(clk_pxa3xx_ac97) = { "spll_624mhz" };
+RATE_RO_OPS(clk_pxa3xx_ac97, "ac97");
+
+static unsigned long clk_pxa3xx_smemc_get_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	unsigned long acsr = readl(clk_regs + ACSR);
+
+	return (parent_rate / 48)  * smcfs_mult[(acsr >> 23) & 0x7] /
+		pxa3xx_smemc_get_memclkdiv();
+
+}
+PARENTS(clk_pxa3xx_smemc) = { "spll_624mhz" };
+RATE_RO_OPS(clk_pxa3xx_smemc, "smemc");
+
+static bool pxa3xx_is_ring_osc_forced(void)
+{
+	unsigned long acsr = readl(clk_regs + ACSR);
+
+	return acsr & ACCR_D0CS;
+}
+
+PARENTS(pxa3xx_pbus) = { "ring_osc_60mhz", "spll_624mhz" };
+PARENTS(pxa3xx_32Khz_bus) = { "osc_32_768khz", "osc_32_768khz" };
+PARENTS(pxa3xx_13MHz_bus) = { "osc_13mhz", "osc_13mhz" };
+PARENTS(pxa3xx_ac97_bus) = { "ring_osc_60mhz", "ac97" };
+PARENTS(pxa3xx_sbus) = { "ring_osc_60mhz", "system_bus" };
+PARENTS(pxa3xx_smemcbus) = { "ring_osc_60mhz", "smemc" };
+
+#define CKEN_AB(bit) ((CKEN_ ## bit > 31) ? CKENB : CKENA)
+#define PXA3XX_CKEN(dev_id, con_id, parents, mult_lp, div_lp, mult_hp,	\
+		    div_hp, bit, is_lp, flags)				\
+	PXA_CKEN(dev_id, con_id, bit, parents, mult_lp, div_lp,		\
+		 mult_hp, div_hp, is_lp,  CKEN_AB(bit),			\
+		 (CKEN_ ## bit % 32), flags)
+#define PXA3XX_PBUS_CKEN(dev_id, con_id, bit, mult_lp, div_lp,		\
+			 mult_hp, div_hp, delay)			\
+	PXA3XX_CKEN(dev_id, con_id, pxa3xx_pbus_parents, mult_lp,	\
+		    div_lp, mult_hp, div_hp, bit, pxa3xx_is_ring_osc_forced, 0)
+#define PXA3XX_CKEN_1RATE(dev_id, con_id, bit, parents)			\
+	PXA_CKEN_1RATE(dev_id, con_id, bit, parents,			\
+		       CKEN_AB(bit), (CKEN_ ## bit % 32), 0)
+
+static struct desc_clk_cken pxa3xx_clocks[] __initdata = {
+	PXA3XX_PBUS_CKEN("pxa2xx-uart.0", NULL, FFUART, 1, 4, 1, 42, 1),
+	PXA3XX_PBUS_CKEN("pxa2xx-uart.1", NULL, BTUART, 1, 4, 1, 42, 1),
+	PXA3XX_PBUS_CKEN("pxa2xx-uart.2", NULL, STUART, 1, 4, 1, 42, 1),
+	PXA3XX_PBUS_CKEN("pxa2xx-i2c.0", NULL, I2C, 2, 5, 1, 19, 0),
+	PXA3XX_PBUS_CKEN("pxa27x-udc", NULL, UDC, 1, 4, 1, 13, 5),
+	PXA3XX_PBUS_CKEN("pxa27x-ohci", NULL, USBH, 1, 4, 1, 13, 0),
+	PXA3XX_PBUS_CKEN("pxa3xx-u2d", NULL, USB2, 1, 4, 1, 13, 0),
+	PXA3XX_PBUS_CKEN("pxa27x-pwm.0", NULL, PWM0, 1, 6, 1, 48, 0),
+	PXA3XX_PBUS_CKEN("pxa27x-pwm.1", NULL, PWM1, 1, 6, 1, 48, 0),
+	PXA3XX_PBUS_CKEN("pxa2xx-mci.0", NULL, MMC1, 1, 4, 1, 24, 0),
+	PXA3XX_PBUS_CKEN("pxa2xx-mci.1", NULL, MMC2, 1, 4, 1, 24, 0),
+	PXA3XX_PBUS_CKEN("pxa2xx-mci.2", NULL, MMC3, 1, 4, 1, 24, 0),
+
+	PXA3XX_CKEN_1RATE("pxa27x-keypad", NULL, KEYPAD,
+			  pxa3xx_32Khz_bus_parents),
+	PXA3XX_CKEN_1RATE("pxa3xx-ssp.0", NULL, SSP1, pxa3xx_13MHz_bus_parents),
+	PXA3XX_CKEN_1RATE("pxa3xx-ssp.1", NULL, SSP2, pxa3xx_13MHz_bus_parents),
+	PXA3XX_CKEN_1RATE("pxa3xx-ssp.2", NULL, SSP3, pxa3xx_13MHz_bus_parents),
+	PXA3XX_CKEN_1RATE("pxa3xx-ssp.3", NULL, SSP4, pxa3xx_13MHz_bus_parents),
+
+	PXA3XX_CKEN(NULL, "AC97CLK", pxa3xx_ac97_bus_parents, 1, 4, 1, 1, AC97,
+		    pxa3xx_is_ring_osc_forced, 0),
+	PXA3XX_CKEN(NULL, "CAMCLK", pxa3xx_sbus_parents, 1, 2, 1, 1, CAMERA,
+		    pxa3xx_is_ring_osc_forced, 0),
+	PXA3XX_CKEN("pxa2xx-fb", NULL, pxa3xx_sbus_parents, 1, 1, 1, 1, LCD,
+		    pxa3xx_is_ring_osc_forced, 0),
+	PXA3XX_CKEN("pxa2xx-pcmcia", NULL, pxa3xx_smemcbus_parents, 1, 4,
+		    1, 1, SMC, pxa3xx_is_ring_osc_forced, CLK_IGNORE_UNUSED),
+};
+
+static struct desc_clk_cken pxa300_310_clocks[] __initdata = {
+
+	PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA300_GCU, 1, 1, 1, 1, 0),
+	PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 4, 0),
+	PXA3XX_CKEN_1RATE("pxa3xx-gpio", NULL, GPIO, pxa3xx_13MHz_bus_parents),
+};
+
+static struct desc_clk_cken pxa320_clocks[] __initdata = {
+	PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 6, 0),
+	PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA320_GCU, 1, 1, 1, 1, 0),
+	PXA3XX_CKEN_1RATE("pxa3xx-gpio", NULL, GPIO, pxa3xx_13MHz_bus_parents),
+};
+
+static struct desc_clk_cken pxa93x_clocks[] __initdata = {
+
+	PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA300_GCU, 1, 1, 1, 1, 0),
+	PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 4, 0),
+	PXA3XX_CKEN_1RATE("pxa93x-gpio", NULL, GPIO, pxa3xx_13MHz_bus_parents),
+};
+
+static unsigned long clk_pxa3xx_system_bus_get_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	unsigned long acsr = readl(clk_regs + ACSR);
+	unsigned int hss = (acsr >> 14) & 0x3;
+
+	if (pxa3xx_is_ring_osc_forced())
+		return parent_rate;
+	return parent_rate / 48 * hss_mult[hss];
+}
+
+static u8 clk_pxa3xx_system_bus_get_parent(struct clk_hw *hw)
+{
+	if (pxa3xx_is_ring_osc_forced())
+		return PXA_BUS_60Mhz;
+	else
+		return PXA_BUS_HSS;
+}
+
+PARENTS(clk_pxa3xx_system_bus) = { "ring_osc_60mhz", "spll_624mhz" };
+MUX_RO_RATE_RO_OPS(clk_pxa3xx_system_bus, "system_bus");
+
+static unsigned long clk_pxa3xx_core_get_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	return parent_rate;
+}
+
+static u8 clk_pxa3xx_core_get_parent(struct clk_hw *hw)
+{
+	unsigned long xclkcfg;
+	unsigned int t;
+
+	if (pxa3xx_is_ring_osc_forced())
+		return PXA_CORE_60Mhz;
+
+	/* Read XCLKCFG register turbo bit */
+	__asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
+	t = xclkcfg & 0x1;
+
+	if (t)
+		return PXA_CORE_TURBO;
+	return PXA_CORE_RUN;
+}
+PARENTS(clk_pxa3xx_core) = { "ring_osc_60mhz", "run", "cpll" };
+MUX_RO_RATE_RO_OPS(clk_pxa3xx_core, "core");
+
+static unsigned long clk_pxa3xx_run_get_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	unsigned long acsr = readl(clk_regs + ACSR);
+	unsigned int xn = (acsr & ACCR_XN_MASK) >> 8;
+	unsigned int t, xclkcfg;
+
+	/* Read XCLKCFG register turbo bit */
+	__asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
+	t = xclkcfg & 0x1;
+
+	return t ? (parent_rate / xn) * 2 : parent_rate;
+}
+PARENTS(clk_pxa3xx_run) = { "cpll" };
+RATE_RO_OPS(clk_pxa3xx_run, "run");
+
+static unsigned long clk_pxa3xx_cpll_get_rate(struct clk_hw *hw,
+	unsigned long parent_rate)
+{
+	unsigned long acsr = readl(clk_regs + ACSR);
+	unsigned int xn = (acsr & ACCR_XN_MASK) >> 8;
+	unsigned int xl = acsr & ACCR_XL_MASK;
+	unsigned int t, xclkcfg;
+
+	/* Read XCLKCFG register turbo bit */
+	__asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
+	t = xclkcfg & 0x1;
+
+	pr_info("RJK: parent_rate=%lu, xl=%u, xn=%u\n", parent_rate, xl, xn);
+	return t ? parent_rate * xl * xn : parent_rate * xl;
+}
+PARENTS(clk_pxa3xx_cpll) = { "osc_13mhz" };
+RATE_RO_OPS(clk_pxa3xx_cpll, "cpll");
+
+static void __init pxa3xx_register_core(void)
+{
+	clk_register_clk_pxa3xx_cpll();
+	clk_register_clk_pxa3xx_run();
+
+	clkdev_pxa_register(CLK_CORE, "core", NULL,
+			    clk_register_clk_pxa3xx_core());
+}
+
+static void __init pxa3xx_register_plls(void)
+{
+	clk_register_fixed_rate(NULL, "osc_13mhz", NULL,
+				CLK_GET_RATE_NOCACHE,
+				13 * MHz);
+	clkdev_pxa_register(CLK_OSC32k768, "osc_32_768khz", NULL,
+			    clk_register_fixed_rate(NULL, "osc_32_768khz", NULL,
+						    CLK_GET_RATE_NOCACHE,
+						    32768));
+	clk_register_fixed_rate(NULL, "ring_osc_120mhz", NULL,
+				CLK_GET_RATE_NOCACHE,
+				120 * MHz);
+	clk_register_fixed_rate(NULL, "clk_dummy", NULL, 0, 0);
+	clk_register_fixed_factor(NULL, "spll_624mhz", "osc_13mhz", 0, 48, 1);
+	clk_register_fixed_factor(NULL, "ring_osc_60mhz", "ring_osc_120mhz",
+				  0, 1, 2);
+}
+
+#define DUMMY_CLK(_con_id, _dev_id, _parent) \
+	{ .con_id = _con_id, .dev_id = _dev_id, .parent = _parent }
+struct dummy_clk {
+	const char *con_id;
+	const char *dev_id;
+	const char *parent;
+};
+static struct dummy_clk dummy_clks[] __initdata = {
+	DUMMY_CLK(NULL, "pxa93x-gpio", "osc_13mhz"),
+	DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"),
+	DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"),
+	DUMMY_CLK(NULL, "pxa3xx-pwri2c.1", "osc_13mhz"),
+};
+
+static void __init pxa3xx_dummy_clocks_init(void)
+{
+	struct clk *clk;
+	struct dummy_clk *d;
+	const char *name;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(dummy_clks); i++) {
+		d = &dummy_clks[i];
+		name = d->dev_id ? d->dev_id : d->con_id;
+		clk = clk_register_fixed_factor(NULL, name, d->parent, 0, 1, 1);
+		clk_register_clkdev(clk, d->con_id, d->dev_id);
+	}
+}
+
+static void __init pxa3xx_base_clocks_init(void __iomem *oscc_reg)
+{
+	struct clk *clk;
+
+	pxa3xx_register_plls();
+	pxa3xx_register_core();
+	clk_register_clk_pxa3xx_system_bus();
+	clk_register_clk_pxa3xx_ac97();
+	clk_register_clk_pxa3xx_smemc();
+	clk = clk_register_gate(NULL, "CLK_POUT",
+				"osc_13mhz", 0, oscc_reg, 11, 0, NULL);
+	clk_register_clkdev(clk, "CLK_POUT", NULL);
+	clkdev_pxa_register(CLK_OSTIMER, "OSTIMER0", NULL,
+			    clk_register_fixed_factor(NULL, "os-timer0",
+						      "osc_13mhz", 0, 1, 4));
+}
+
+int __init pxa3xx_clocks_init(void __iomem *regs, void __iomem *oscc_reg)
+{
+	int ret;
+
+	clk_regs = regs;
+	pxa3xx_base_clocks_init(oscc_reg);
+	pxa3xx_dummy_clocks_init();
+	ret = clk_pxa_cken_init(pxa3xx_clocks, ARRAY_SIZE(pxa3xx_clocks), regs);
+	if (ret)
+		return ret;
+	if (cpu_is_pxa320())
+		return clk_pxa_cken_init(pxa320_clocks,
+					 ARRAY_SIZE(pxa320_clocks), regs);
+	if (cpu_is_pxa300() || cpu_is_pxa310())
+		return clk_pxa_cken_init(pxa300_310_clocks,
+					 ARRAY_SIZE(pxa300_310_clocks), regs);
+	return clk_pxa_cken_init(pxa93x_clocks, ARRAY_SIZE(pxa93x_clocks), regs);
+}
+
+static void __init pxa3xx_dt_clocks_init(struct device_node *np)
+{
+	pxa3xx_clocks_init(ioremap(0x41340000, 0x10), ioremap(0x41350000, 4));
+	clk_pxa_dt_common_init(np);
+}
+CLK_OF_DECLARE(pxa_clks, "marvell,pxa300-clocks", pxa3xx_dt_clocks_init);