Resguardo inicial

linux-7.2.3/drivers/clk/sunxi/Kconfig

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig CLK_SUNXI
+	bool "Legacy clock support for Allwinner SoCs"
+	depends on (ARM && ARCH_SUNXI) || COMPILE_TEST
+	default (ARM && ARCH_SUNXI)
+
+if CLK_SUNXI
+
+config CLK_SUNXI_CLOCKS
+	bool "Legacy clock drivers"
+	default ARCH_SUNXI
+	help
+	  Legacy clock drivers being used on older (A10, A13, A20,
+	  A23, A31, A80) SoCs. These drivers are kept around for
+	  Device Tree backward compatibility issues, in case one would
+	  still use a Device Tree with one clock provider by
+	  node. Newer Device Trees and newer SoCs use the drivers
+	  controlled by CONFIG_SUNXI_CCU.
+
+config CLK_SUNXI_PRCM_SUN6I
+	bool "Legacy A31 PRCM driver"
+	default ARCH_SUNXI
+	help
+	  Legacy clock driver for the A31 PRCM clocks. Those are
+	  usually needed for the PMIC communication, mostly.
+
+config CLK_SUNXI_PRCM_SUN8I
+	bool "Legacy sun8i PRCM driver"
+	default ARCH_SUNXI
+	help
+	  Legacy clock driver for the sun8i family PRCM clocks.
+	  Those are usually needed for the PMIC communication,
+	  mostly.
+
+config CLK_SUNXI_PRCM_SUN9I
+	bool "Legacy A80 PRCM driver"
+	default ARCH_SUNXI
+	help
+	  Legacy clock driver for the A80 PRCM clocks. Those are
+	  usually needed for the PMIC communication, mostly.
+
+endif

linux-7.2.3/drivers/clk/sunxi/Makefile

@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for sunxi specific clk
+#
+
+obj-$(CONFIG_CLK_SUNXI) += clk-factors.o
+
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sunxi.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-a10-codec.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-a10-hosc.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-a10-mod1.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-a10-pll2.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-a10-ve.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-a20-gmac.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-mod0.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-simple-gates.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun4i-display.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun4i-pll3.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun4i-tcon-ch1.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun8i-bus-gates.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun8i-mbus.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun9i-core.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun9i-mmc.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-usb.o
+
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun8i-apb0.o
+obj-$(CONFIG_CLK_SUNXI_CLOCKS) += clk-sun9i-cpus.o
+
+obj-$(CONFIG_CLK_SUNXI_PRCM_SUN6I)	+= clk-sun6i-apb0.o
+obj-$(CONFIG_CLK_SUNXI_PRCM_SUN6I)	+= clk-sun6i-apb0-gates.o
+obj-$(CONFIG_CLK_SUNXI_PRCM_SUN6I)	+= clk-sun6i-ar100.o
+
+obj-$(CONFIG_CLK_SUNXI_PRCM_SUN8I)	+= clk-sun8i-apb0.o
+obj-$(CONFIG_CLK_SUNXI_PRCM_SUN8I)	+= clk-sun6i-apb0-gates.o

linux-7.2.3/drivers/clk/sunxi/clk-a10-codec.c

@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#define SUN4I_CODEC_GATE	31
+
+static void __init sun4i_codec_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	const char *clk_name = node->name, *parent_name;
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg))
+		return;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+	parent_name = of_clk_get_parent_name(node, 0);
+
+	clk = clk_register_gate(NULL, clk_name, parent_name,
+				CLK_SET_RATE_PARENT, reg,
+				SUN4I_CODEC_GATE, 0, NULL);
+
+	if (!IS_ERR(clk))
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+CLK_OF_DECLARE(sun4i_codec, "allwinner,sun4i-a10-codec-clk",
+	       sun4i_codec_clk_setup);

linux-7.2.3/drivers/clk/sunxi/clk-a10-hosc.c

@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#define SUNXI_OSC24M_GATE	0
+
+static DEFINE_SPINLOCK(hosc_lock);
+
+static void __init sun4i_osc_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	struct clk_fixed_rate *fixed;
+	struct clk_gate *gate;
+	const char *clk_name = node->name;
+	u32 rate;
+
+	if (of_property_read_u32(node, "clock-frequency", &rate))
+		return;
+
+	/* allocate fixed-rate and gate clock structs */
+	fixed = kzalloc_obj(struct clk_fixed_rate);
+	if (!fixed)
+		return;
+	gate = kzalloc_obj(struct clk_gate);
+	if (!gate)
+		goto err_free_fixed;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	/* set up gate and fixed rate properties */
+	gate->reg = of_iomap(node, 0);
+	gate->bit_idx = SUNXI_OSC24M_GATE;
+	gate->lock = &hosc_lock;
+	fixed->fixed_rate = rate;
+
+	clk = clk_register_composite(NULL, clk_name,
+			NULL, 0,
+			NULL, NULL,
+			&fixed->hw, &clk_fixed_rate_ops,
+			&gate->hw, &clk_gate_ops, 0);
+
+	if (IS_ERR(clk))
+		goto err_free_gate;
+
+	of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+	return;
+
+err_free_gate:
+	kfree(gate);
+err_free_fixed:
+	kfree(fixed);
+}
+CLK_OF_DECLARE(sun4i_osc, "allwinner,sun4i-a10-osc-clk", sun4i_osc_clk_setup);

linux-7.2.3/drivers/clk/sunxi/clk-a10-mod1.c

@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+static DEFINE_SPINLOCK(mod1_lock);
+
+#define SUN4I_MOD1_ENABLE	31
+#define SUN4I_MOD1_MUX		16
+#define SUN4I_MOD1_MUX_WIDTH	2
+#define SUN4I_MOD1_MAX_PARENTS	4
+
+static void __init sun4i_mod1_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	struct clk_mux *mux;
+	struct clk_gate *gate;
+	const char *parents[4];
+	const char *clk_name = node->name;
+	void __iomem *reg;
+	int i;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg))
+		return;
+
+	mux = kzalloc_obj(*mux);
+	if (!mux)
+		goto err_unmap;
+
+	gate = kzalloc_obj(*gate);
+	if (!gate)
+		goto err_free_mux;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+	i = of_clk_parent_fill(node, parents, SUN4I_MOD1_MAX_PARENTS);
+
+	gate->reg = reg;
+	gate->bit_idx = SUN4I_MOD1_ENABLE;
+	gate->lock = &mod1_lock;
+	mux->reg = reg;
+	mux->shift = SUN4I_MOD1_MUX;
+	mux->mask = BIT(SUN4I_MOD1_MUX_WIDTH) - 1;
+	mux->lock = &mod1_lock;
+
+	clk = clk_register_composite(NULL, clk_name, parents, i,
+				     &mux->hw, &clk_mux_ops,
+				     NULL, NULL,
+				     &gate->hw, &clk_gate_ops, CLK_SET_RATE_PARENT);
+	if (IS_ERR(clk))
+		goto err_free_gate;
+
+	of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+	return;
+
+err_free_gate:
+	kfree(gate);
+err_free_mux:
+	kfree(mux);
+err_unmap:
+	iounmap(reg);
+}
+CLK_OF_DECLARE(sun4i_mod1, "allwinner,sun4i-a10-mod1-clk",
+	       sun4i_mod1_clk_setup);

linux-7.2.3/drivers/clk/sunxi/clk-a10-pll2.c

@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Emilio López
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * Copyright 2015 Maxime Ripard
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
+
+#define SUN4I_PLL2_ENABLE		31
+
+#define SUN4I_PLL2_PRE_DIV_SHIFT	0
+#define SUN4I_PLL2_PRE_DIV_WIDTH	5
+#define SUN4I_PLL2_PRE_DIV_MASK		GENMASK(SUN4I_PLL2_PRE_DIV_WIDTH - 1, 0)
+
+#define SUN4I_PLL2_N_SHIFT		8
+#define SUN4I_PLL2_N_WIDTH		7
+#define SUN4I_PLL2_N_MASK		GENMASK(SUN4I_PLL2_N_WIDTH - 1, 0)
+
+#define SUN4I_PLL2_POST_DIV_SHIFT	26
+#define SUN4I_PLL2_POST_DIV_WIDTH	4
+#define SUN4I_PLL2_POST_DIV_MASK	GENMASK(SUN4I_PLL2_POST_DIV_WIDTH - 1, 0)
+
+#define SUN4I_PLL2_POST_DIV_VALUE	4
+
+#define SUN4I_PLL2_OUTPUTS		4
+
+static DEFINE_SPINLOCK(sun4i_a10_pll2_lock);
+
+static void __init sun4i_pll2_setup(struct device_node *node,
+				    int post_div_offset)
+{
+	const char *clk_name = node->name, *parent;
+	struct clk **clks, *base_clk, *prediv_clk;
+	struct clk_onecell_data *clk_data;
+	struct clk_multiplier *mult;
+	struct clk_gate *gate;
+	void __iomem *reg;
+	u32 val;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg))
+		return;
+
+	clk_data = kzalloc_obj(*clk_data);
+	if (!clk_data)
+		goto err_unmap;
+
+	clks = kzalloc_objs(struct clk *, SUN4I_PLL2_OUTPUTS);
+	if (!clks)
+		goto err_free_data;
+
+	parent = of_clk_get_parent_name(node, 0);
+	prediv_clk = clk_register_divider(NULL, "pll2-prediv",
+					  parent, 0, reg,
+					  SUN4I_PLL2_PRE_DIV_SHIFT,
+					  SUN4I_PLL2_PRE_DIV_WIDTH,
+					  CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+					  &sun4i_a10_pll2_lock);
+	if (IS_ERR(prediv_clk)) {
+		pr_err("Couldn't register the prediv clock\n");
+		goto err_free_array;
+	}
+
+	/* Setup the gate part of the PLL2 */
+	gate = kzalloc_obj(struct clk_gate);
+	if (!gate)
+		goto err_unregister_prediv;
+
+	gate->reg = reg;
+	gate->bit_idx = SUN4I_PLL2_ENABLE;
+	gate->lock = &sun4i_a10_pll2_lock;
+
+	/* Setup the multiplier part of the PLL2 */
+	mult = kzalloc_obj(struct clk_multiplier);
+	if (!mult)
+		goto err_free_gate;
+
+	mult->reg = reg;
+	mult->shift = SUN4I_PLL2_N_SHIFT;
+	mult->width = 7;
+	mult->flags = CLK_MULTIPLIER_ZERO_BYPASS |
+			CLK_MULTIPLIER_ROUND_CLOSEST;
+	mult->lock = &sun4i_a10_pll2_lock;
+
+	parent = __clk_get_name(prediv_clk);
+	base_clk = clk_register_composite(NULL, "pll2-base",
+					  &parent, 1,
+					  NULL, NULL,
+					  &mult->hw, &clk_multiplier_ops,
+					  &gate->hw, &clk_gate_ops,
+					  CLK_SET_RATE_PARENT);
+	if (IS_ERR(base_clk)) {
+		pr_err("Couldn't register the base multiplier clock\n");
+		goto err_free_multiplier;
+	}
+
+	parent = __clk_get_name(base_clk);
+
+	/*
+	 * PLL2-1x
+	 *
+	 * This is supposed to have a post divider, but we won't need
+	 * to use it, we just need to initialise it to 4, and use a
+	 * fixed divider.
+	 */
+	val = readl(reg);
+	val &= ~(SUN4I_PLL2_POST_DIV_MASK << SUN4I_PLL2_POST_DIV_SHIFT);
+	val |= (SUN4I_PLL2_POST_DIV_VALUE - post_div_offset) << SUN4I_PLL2_POST_DIV_SHIFT;
+	writel(val, reg);
+
+	of_property_read_string_index(node, "clock-output-names",
+				      SUN4I_A10_PLL2_1X, &clk_name);
+	clks[SUN4I_A10_PLL2_1X] = clk_register_fixed_factor(NULL, clk_name,
+							    parent,
+							    CLK_SET_RATE_PARENT,
+							    1,
+							    SUN4I_PLL2_POST_DIV_VALUE);
+	WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_1X]));
+
+	/*
+	 * PLL2-2x
+	 *
+	 * This clock doesn't use the post divider, and really is just
+	 * a fixed divider from the PLL2 base clock.
+	 */
+	of_property_read_string_index(node, "clock-output-names",
+				      SUN4I_A10_PLL2_2X, &clk_name);
+	clks[SUN4I_A10_PLL2_2X] = clk_register_fixed_factor(NULL, clk_name,
+							    parent,
+							    CLK_SET_RATE_PARENT,
+							    1, 2);
+	WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_2X]));
+
+	/* PLL2-4x */
+	of_property_read_string_index(node, "clock-output-names",
+				      SUN4I_A10_PLL2_4X, &clk_name);
+	clks[SUN4I_A10_PLL2_4X] = clk_register_fixed_factor(NULL, clk_name,
+							    parent,
+							    CLK_SET_RATE_PARENT,
+							    1, 1);
+	WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_4X]));
+
+	/* PLL2-8x */
+	of_property_read_string_index(node, "clock-output-names",
+				      SUN4I_A10_PLL2_8X, &clk_name);
+	clks[SUN4I_A10_PLL2_8X] = clk_register_fixed_factor(NULL, clk_name,
+							    parent,
+							    CLK_SET_RATE_PARENT,
+							    2, 1);
+	WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_8X]));
+
+	clk_data->clks = clks;
+	clk_data->clk_num = SUN4I_PLL2_OUTPUTS;
+	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	return;
+
+err_free_multiplier:
+	kfree(mult);
+err_free_gate:
+	kfree(gate);
+err_unregister_prediv:
+	clk_unregister_divider(prediv_clk);
+err_free_array:
+	kfree(clks);
+err_free_data:
+	kfree(clk_data);
+err_unmap:
+	iounmap(reg);
+}
+
+static void __init sun4i_a10_pll2_setup(struct device_node *node)
+{
+	sun4i_pll2_setup(node, 0);
+}
+
+CLK_OF_DECLARE(sun4i_a10_pll2, "allwinner,sun4i-a10-pll2-clk",
+	       sun4i_a10_pll2_setup);
+
+static void __init sun5i_a13_pll2_setup(struct device_node *node)
+{
+	sun4i_pll2_setup(node, 1);
+}
+
+CLK_OF_DECLARE(sun5i_a13_pll2, "allwinner,sun5i-a13-pll2-clk",
+	       sun5i_a13_pll2_setup);

linux-7.2.3/drivers/clk/sunxi/clk-a10-ve.c

@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+static DEFINE_SPINLOCK(ve_lock);
+
+#define SUN4I_VE_ENABLE		31
+#define SUN4I_VE_DIVIDER_SHIFT	16
+#define SUN4I_VE_DIVIDER_WIDTH	3
+#define SUN4I_VE_RESET		0
+
+/*
+ * sunxi_ve_reset... - reset bit in ve clk registers handling
+ */
+
+struct ve_reset_data {
+	void __iomem			*reg;
+	spinlock_t			*lock;
+	struct reset_controller_dev	rcdev;
+};
+
+static int sunxi_ve_reset_assert(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	struct ve_reset_data *data = container_of(rcdev,
+						  struct ve_reset_data,
+						  rcdev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(data->lock, flags);
+
+	reg = readl(data->reg);
+	writel(reg & ~BIT(SUN4I_VE_RESET), data->reg);
+
+	spin_unlock_irqrestore(data->lock, flags);
+
+	return 0;
+}
+
+static int sunxi_ve_reset_deassert(struct reset_controller_dev *rcdev,
+				   unsigned long id)
+{
+	struct ve_reset_data *data = container_of(rcdev,
+						  struct ve_reset_data,
+						  rcdev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(data->lock, flags);
+
+	reg = readl(data->reg);
+	writel(reg | BIT(SUN4I_VE_RESET), data->reg);
+
+	spin_unlock_irqrestore(data->lock, flags);
+
+	return 0;
+}
+
+static int sunxi_ve_of_xlate(struct reset_controller_dev *rcdev,
+			     const struct of_phandle_args *reset_spec)
+{
+	if (WARN_ON(reset_spec->args_count != 0))
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct reset_control_ops sunxi_ve_reset_ops = {
+	.assert		= sunxi_ve_reset_assert,
+	.deassert	= sunxi_ve_reset_deassert,
+};
+
+static void __init sun4i_ve_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	struct clk_divider *div;
+	struct clk_gate *gate;
+	struct ve_reset_data *reset_data;
+	const char *parent;
+	const char *clk_name = node->name;
+	void __iomem *reg;
+	int err;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg))
+		return;
+
+	div = kzalloc_obj(*div);
+	if (!div)
+		goto err_unmap;
+
+	gate = kzalloc_obj(*gate);
+	if (!gate)
+		goto err_free_div;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+	parent = of_clk_get_parent_name(node, 0);
+
+	gate->reg = reg;
+	gate->bit_idx = SUN4I_VE_ENABLE;
+	gate->lock = &ve_lock;
+
+	div->reg = reg;
+	div->shift = SUN4I_VE_DIVIDER_SHIFT;
+	div->width = SUN4I_VE_DIVIDER_WIDTH;
+	div->lock = &ve_lock;
+
+	clk = clk_register_composite(NULL, clk_name, &parent, 1,
+				     NULL, NULL,
+				     &div->hw, &clk_divider_ops,
+				     &gate->hw, &clk_gate_ops,
+				     CLK_SET_RATE_PARENT);
+	if (IS_ERR(clk))
+		goto err_free_gate;
+
+	err = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	if (err)
+		goto err_unregister_clk;
+
+	reset_data = kzalloc_obj(*reset_data);
+	if (!reset_data)
+		goto err_del_provider;
+
+	reset_data->reg = reg;
+	reset_data->lock = &ve_lock;
+	reset_data->rcdev.nr_resets = 1;
+	reset_data->rcdev.ops = &sunxi_ve_reset_ops;
+	reset_data->rcdev.of_node = node;
+	reset_data->rcdev.of_xlate = sunxi_ve_of_xlate;
+	reset_data->rcdev.of_reset_n_cells = 0;
+	err = reset_controller_register(&reset_data->rcdev);
+	if (err)
+		goto err_free_reset;
+
+	return;
+
+err_free_reset:
+	kfree(reset_data);
+err_del_provider:
+	of_clk_del_provider(node);
+err_unregister_clk:
+	clk_unregister(clk);
+err_free_gate:
+	kfree(gate);
+err_free_div:
+	kfree(div);
+err_unmap:
+	iounmap(reg);
+}
+CLK_OF_DECLARE(sun4i_ve, "allwinner,sun4i-a10-ve-clk",
+	       sun4i_ve_clk_setup);

linux-7.2.3/drivers/clk/sunxi/clk-a20-gmac.c

@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Emilio López
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * Copyright 2013 Chen-Yu Tsai
+ * Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+static DEFINE_SPINLOCK(gmac_lock);
+
+
+#define SUN7I_A20_GMAC_GPIT	2
+#define SUN7I_A20_GMAC_MASK	0x3
+#define SUN7I_A20_GMAC_PARENTS	2
+
+static u32 sun7i_a20_gmac_mux_table[SUN7I_A20_GMAC_PARENTS] = {
+	0x00, /* Select mii_phy_tx_clk */
+	0x02, /* Select gmac_int_tx_clk */
+};
+
+/**
+ * sun7i_a20_gmac_clk_setup - Setup function for A20/A31 GMAC clock module
+ * @node: &struct device_node for the clock
+ *
+ * This clock looks something like this
+ *                               ________________________
+ *  MII TX clock from PHY >-----|___________    _________|----> to GMAC core
+ *  GMAC Int. RGMII TX clk >----|___________\__/__gate---|----> to PHY
+ *  Ext. 125MHz RGMII TX clk >--|__divider__/            |
+ *                              |________________________|
+ *
+ * The external 125 MHz reference is optional, i.e. GMAC can use its
+ * internal TX clock just fine. The A31 GMAC clock module does not have
+ * the divider controls for the external reference.
+ *
+ * To keep it simple, let the GMAC use either the MII TX clock for MII mode,
+ * and its internal TX clock for GMII and RGMII modes. The GMAC driver should
+ * select the appropriate source and gate/ungate the output to the PHY.
+ *
+ * Only the GMAC should use this clock. Altering the clock so that it doesn't
+ * match the GMAC's operation parameters will result in the GMAC not being
+ * able to send traffic out. The GMAC driver should set the clock rate and
+ * enable/disable this clock to configure the required state. The clock
+ * driver then responds by auto-reparenting the clock.
+ */
+static void __init sun7i_a20_gmac_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	struct clk_mux *mux;
+	struct clk_gate *gate;
+	const char *clk_name = node->name;
+	const char *parents[SUN7I_A20_GMAC_PARENTS];
+	void __iomem *reg;
+
+	if (of_property_read_string(node, "clock-output-names", &clk_name))
+		return;
+
+	/* allocate mux and gate clock structs */
+	mux = kzalloc_obj(struct clk_mux);
+	if (!mux)
+		return;
+
+	gate = kzalloc_obj(struct clk_gate);
+	if (!gate)
+		goto free_mux;
+
+	/* gmac clock requires exactly 2 parents */
+	if (of_clk_parent_fill(node, parents, 2) != 2)
+		goto free_gate;
+
+	reg = of_iomap(node, 0);
+	if (!reg)
+		goto free_gate;
+
+	/* set up gate and fixed rate properties */
+	gate->reg = reg;
+	gate->bit_idx = SUN7I_A20_GMAC_GPIT;
+	gate->lock = &gmac_lock;
+	mux->reg = reg;
+	mux->mask = SUN7I_A20_GMAC_MASK;
+	mux->table = sun7i_a20_gmac_mux_table;
+	mux->lock = &gmac_lock;
+
+	clk = clk_register_composite(NULL, clk_name,
+			parents, SUN7I_A20_GMAC_PARENTS,
+			&mux->hw, &clk_mux_ops,
+			NULL, NULL,
+			&gate->hw, &clk_gate_ops,
+			0);
+
+	if (IS_ERR(clk))
+		goto iounmap_reg;
+
+	of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+	return;
+
+iounmap_reg:
+	iounmap(reg);
+free_gate:
+	kfree(gate);
+free_mux:
+	kfree(mux);
+}
+CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk",
+		sun7i_a20_gmac_clk_setup);

linux-7.2.3/drivers/clk/sunxi/clk-factors.c

@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Emilio López <emilio@elopez.com.ar>
+ *
+ * Adjustable factor-based clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include "clk-factors.h"
+
+/*
+ * DOC: basic adjustable factor-based clock
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is adjustable.
+ *        clk->rate = (parent->rate * N * (K + 1) >> P) / (M + 1)
+ * parent - fixed parent.  No clk_set_parent support
+ */
+
+#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
+
+#define FACTORS_MAX_PARENTS		5
+
+#define SETMASK(len, pos)		(((1U << (len)) - 1) << (pos))
+#define CLRMASK(len, pos)		(~(SETMASK(len, pos)))
+#define FACTOR_GET(bit, len, reg)	(((reg) & SETMASK(len, bit)) >> (bit))
+
+#define FACTOR_SET(bit, len, reg, val) \
+	(((reg) & CLRMASK(len, bit)) | (val << (bit)))
+
+static unsigned long clk_factors_recalc_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	u8 n = 1, k = 0, p = 0, m = 0;
+	u32 reg;
+	unsigned long rate;
+	struct clk_factors *factors = to_clk_factors(hw);
+	const struct clk_factors_config *config = factors->config;
+
+	/* Fetch the register value */
+	reg = readl(factors->reg);
+
+	/* Get each individual factor if applicable */
+	if (config->nwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+		n = FACTOR_GET(config->nshift, config->nwidth, reg);
+	if (config->kwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+		k = FACTOR_GET(config->kshift, config->kwidth, reg);
+	if (config->mwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+		m = FACTOR_GET(config->mshift, config->mwidth, reg);
+	if (config->pwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+		p = FACTOR_GET(config->pshift, config->pwidth, reg);
+
+	if (factors->recalc) {
+		struct factors_request factors_req = {
+			.parent_rate = parent_rate,
+			.n = n,
+			.k = k,
+			.m = m,
+			.p = p,
+		};
+
+		/* get mux details from mux clk structure */
+		if (factors->mux)
+			factors_req.parent_index =
+				(reg >> factors->mux->shift) &
+				factors->mux->mask;
+
+		factors->recalc(&factors_req);
+
+		return factors_req.rate;
+	}
+
+	/* Calculate the rate */
+	rate = (parent_rate * (n + config->n_start) * (k + 1) >> p) / (m + 1);
+
+	return rate;
+}
+
+static int clk_factors_determine_rate(struct clk_hw *hw,
+				      struct clk_rate_request *req)
+{
+	struct clk_factors *factors = to_clk_factors(hw);
+	struct clk_hw *parent, *best_parent = NULL;
+	int i, num_parents;
+	unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0;
+
+	/* find the parent that can help provide the fastest rate <= rate */
+	num_parents = clk_hw_get_num_parents(hw);
+	for (i = 0; i < num_parents; i++) {
+		struct factors_request factors_req = {
+			.rate = req->rate,
+			.parent_index = i,
+		};
+		parent = clk_hw_get_parent_by_index(hw, i);
+		if (!parent)
+			continue;
+		if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)
+			parent_rate = clk_hw_round_rate(parent, req->rate);
+		else
+			parent_rate = clk_hw_get_rate(parent);
+
+		factors_req.parent_rate = parent_rate;
+		factors->get_factors(&factors_req);
+		child_rate = factors_req.rate;
+
+		if (child_rate <= req->rate && child_rate > best_child_rate) {
+			best_parent = parent;
+			best = parent_rate;
+			best_child_rate = child_rate;
+		}
+	}
+
+	if (!best_parent)
+		return -EINVAL;
+
+	req->best_parent_hw = best_parent;
+	req->best_parent_rate = best;
+	req->rate = best_child_rate;
+
+	return 0;
+}
+
+static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct factors_request req = {
+		.rate = rate,
+		.parent_rate = parent_rate,
+	};
+	u32 reg;
+	struct clk_factors *factors = to_clk_factors(hw);
+	const struct clk_factors_config *config = factors->config;
+	unsigned long flags = 0;
+
+	factors->get_factors(&req);
+
+	if (factors->lock)
+		spin_lock_irqsave(factors->lock, flags);
+
+	/* Fetch the register value */
+	reg = readl(factors->reg);
+
+	/* Set up the new factors - macros do not do anything if width is 0 */
+	reg = FACTOR_SET(config->nshift, config->nwidth, reg, req.n);
+	reg = FACTOR_SET(config->kshift, config->kwidth, reg, req.k);
+	reg = FACTOR_SET(config->mshift, config->mwidth, reg, req.m);
+	reg = FACTOR_SET(config->pshift, config->pwidth, reg, req.p);
+
+	/* Apply them now */
+	writel(reg, factors->reg);
+
+	/* delay 500us so pll stabilizes */
+	__delay((rate >> 20) * 500 / 2);
+
+	if (factors->lock)
+		spin_unlock_irqrestore(factors->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops clk_factors_ops = {
+	.determine_rate = clk_factors_determine_rate,
+	.recalc_rate = clk_factors_recalc_rate,
+	.set_rate = clk_factors_set_rate,
+};
+
+static struct clk *__sunxi_factors_register(struct device_node *node,
+					    const struct factors_data *data,
+					    spinlock_t *lock, void __iomem *reg,
+					    unsigned long flags)
+{
+	struct clk *clk;
+	struct clk_factors *factors;
+	struct clk_gate *gate = NULL;
+	struct clk_mux *mux = NULL;
+	struct clk_hw *gate_hw = NULL;
+	struct clk_hw *mux_hw = NULL;
+	const char *clk_name = node->name;
+	const char *parents[FACTORS_MAX_PARENTS];
+	int ret, i = 0;
+
+	/* if we have a mux, we will have >1 parents */
+	i = of_clk_parent_fill(node, parents, FACTORS_MAX_PARENTS);
+
+	/*
+	 * some factor clocks, such as pll5 and pll6, may have multiple
+	 * outputs, and have their name designated in factors_data
+	 */
+	if (data->name)
+		clk_name = data->name;
+	else
+		of_property_read_string(node, "clock-output-names", &clk_name);
+
+	factors = kzalloc_obj(struct clk_factors);
+	if (!factors)
+		goto err_factors;
+
+	/* set up factors properties */
+	factors->reg = reg;
+	factors->config = data->table;
+	factors->get_factors = data->getter;
+	factors->recalc = data->recalc;
+	factors->lock = lock;
+
+	/* Add a gate if this factor clock can be gated */
+	if (data->enable) {
+		gate = kzalloc_obj(struct clk_gate);
+		if (!gate)
+			goto err_gate;
+
+		factors->gate = gate;
+
+		/* set up gate properties */
+		gate->reg = reg;
+		gate->bit_idx = data->enable;
+		gate->lock = factors->lock;
+		gate_hw = &gate->hw;
+	}
+
+	/* Add a mux if this factor clock can be muxed */
+	if (data->mux) {
+		mux = kzalloc_obj(struct clk_mux);
+		if (!mux)
+			goto err_mux;
+
+		factors->mux = mux;
+
+		/* set up gate properties */
+		mux->reg = reg;
+		mux->shift = data->mux;
+		mux->mask = data->muxmask;
+		mux->lock = factors->lock;
+		mux_hw = &mux->hw;
+	}
+
+	clk = clk_register_composite(NULL, clk_name,
+			parents, i,
+			mux_hw, &clk_mux_ops,
+			&factors->hw, &clk_factors_ops,
+			gate_hw, &clk_gate_ops, CLK_IS_CRITICAL);
+	if (IS_ERR(clk))
+		goto err_register;
+
+	ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	if (ret)
+		goto err_provider;
+
+	return clk;
+
+err_provider:
+	/* TODO: The composite clock stuff will leak a bit here. */
+	clk_unregister(clk);
+err_register:
+	kfree(mux);
+err_mux:
+	kfree(gate);
+err_gate:
+	kfree(factors);
+err_factors:
+	return NULL;
+}
+
+struct clk *sunxi_factors_register(struct device_node *node,
+				   const struct factors_data *data,
+				   spinlock_t *lock,
+				   void __iomem *reg)
+{
+	return __sunxi_factors_register(node, data, lock, reg, 0);
+}
+
+struct clk *sunxi_factors_register_critical(struct device_node *node,
+					    const struct factors_data *data,
+					    spinlock_t *lock,
+					    void __iomem *reg)
+{
+	return __sunxi_factors_register(node, data, lock, reg, CLK_IS_CRITICAL);
+}
+
+void sunxi_factors_unregister(struct device_node *node, struct clk *clk)
+{
+	struct clk_hw *hw = __clk_get_hw(clk);
+	struct clk_factors *factors;
+
+	if (!hw)
+		return;
+
+	factors = to_clk_factors(hw);
+
+	of_clk_del_provider(node);
+	/* TODO: The composite clock stuff will leak a bit here. */
+	clk_unregister(clk);
+	kfree(factors->mux);
+	kfree(factors->gate);
+	kfree(factors);
+}

linux-7.2.3/drivers/clk/sunxi/clk-factors.h

@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_SUNXI_CLK_FACTORS_H
+#define __MACH_SUNXI_CLK_FACTORS_H
+
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+
+#define SUNXI_FACTORS_NOT_APPLICABLE	(0)
+
+struct clk_factors_config {
+	u8 nshift;
+	u8 nwidth;
+	u8 kshift;
+	u8 kwidth;
+	u8 mshift;
+	u8 mwidth;
+	u8 pshift;
+	u8 pwidth;
+	u8 n_start;
+};
+
+struct factors_request {
+	unsigned long rate;
+	unsigned long parent_rate;
+	u8 parent_index;
+	u8 n;
+	u8 k;
+	u8 m;
+	u8 p;
+};
+
+struct factors_data {
+	int enable;
+	int mux;
+	int muxmask;
+	const struct clk_factors_config *table;
+	void (*getter)(struct factors_request *req);
+	void (*recalc)(struct factors_request *req);
+	const char *name;
+};
+
+struct clk_factors {
+	struct clk_hw hw;
+	void __iomem *reg;
+	const struct clk_factors_config *config;
+	void (*get_factors)(struct factors_request *req);
+	void (*recalc)(struct factors_request *req);
+	spinlock_t *lock;
+	/* for cleanup */
+	struct clk_mux *mux;
+	struct clk_gate *gate;
+};
+
+struct clk *sunxi_factors_register(struct device_node *node,
+				   const struct factors_data *data,
+				   spinlock_t *lock,
+				   void __iomem *reg);
+struct clk *sunxi_factors_register_critical(struct device_node *node,
+					    const struct factors_data *data,
+					    spinlock_t *lock,
+					    void __iomem *reg);
+
+void sunxi_factors_unregister(struct device_node *node, struct clk *clk);
+
+#endif

linux-7.2.3/drivers/clk/sunxi/clk-mod0.c

@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "clk-factors.h"
+
+/*
+ * sun4i_a10_get_mod0_factors() - calculates m, n factors for MOD0-style clocks
+ * MOD0 rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+
+static void sun4i_a10_get_mod0_factors(struct factors_request *req)
+{
+	u8 div, calcm, calcp;
+
+	/* These clocks can only divide, so we will never be able to achieve
+	 * frequencies higher than the parent frequency */
+	if (req->rate > req->parent_rate)
+		req->rate = req->parent_rate;
+
+	div = DIV_ROUND_UP(req->parent_rate, req->rate);
+
+	if (div < 16)
+		calcp = 0;
+	else if (div / 2 < 16)
+		calcp = 1;
+	else if (div / 4 < 16)
+		calcp = 2;
+	else
+		calcp = 3;
+
+	calcm = DIV_ROUND_UP(div, 1 << calcp);
+
+	req->rate = (req->parent_rate >> calcp) / calcm;
+	req->m = calcm - 1;
+	req->p = calcp;
+}
+
+/* user manual says "n" but it's really "p" */
+static const struct clk_factors_config sun4i_a10_mod0_config = {
+	.mshift = 0,
+	.mwidth = 4,
+	.pshift = 16,
+	.pwidth = 2,
+};
+
+static const struct factors_data sun4i_a10_mod0_data = {
+	.enable = 31,
+	.mux = 24,
+	.muxmask = BIT(1) | BIT(0),
+	.table = &sun4i_a10_mod0_config,
+	.getter = sun4i_a10_get_mod0_factors,
+};
+
+static DEFINE_SPINLOCK(sun4i_a10_mod0_lock);
+
+static void __init sun4i_a10_mod0_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_iomap(node, 0);
+	if (!reg) {
+		/*
+		 * This happens with mod0 clk nodes instantiated through
+		 * mfd, as those do not have their resources assigned at
+		 * CLK_OF_DECLARE time yet, so do not print an error.
+		 */
+		return;
+	}
+
+	sunxi_factors_register(node, &sun4i_a10_mod0_data,
+			       &sun4i_a10_mod0_lock, reg);
+}
+CLK_OF_DECLARE_DRIVER(sun4i_a10_mod0, "allwinner,sun4i-a10-mod0-clk",
+		      sun4i_a10_mod0_setup);
+
+static int sun4i_a10_mod0_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	void __iomem *reg;
+
+	if (!np)
+		return -ENODEV;
+
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	sunxi_factors_register(np, &sun4i_a10_mod0_data,
+			       &sun4i_a10_mod0_lock, reg);
+	return 0;
+}
+
+static const struct of_device_id sun4i_a10_mod0_clk_dt_ids[] = {
+	{ .compatible = "allwinner,sun4i-a10-mod0-clk" },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver sun4i_a10_mod0_clk_driver = {
+	.driver = {
+		.name = "sun4i-a10-mod0-clk",
+		.of_match_table = sun4i_a10_mod0_clk_dt_ids,
+	},
+	.probe = sun4i_a10_mod0_clk_probe,
+};
+builtin_platform_driver(sun4i_a10_mod0_clk_driver);
+
+static const struct factors_data sun9i_a80_mod0_data __initconst = {
+	.enable = 31,
+	.mux = 24,
+	.muxmask = BIT(3) | BIT(2) | BIT(1) | BIT(0),
+	.table = &sun4i_a10_mod0_config,
+	.getter = sun4i_a10_get_mod0_factors,
+};
+
+static void __init sun9i_a80_mod0_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("Could not get registers for mod0-clk: %pOFn\n",
+		       node);
+		return;
+	}
+
+	sunxi_factors_register(node, &sun9i_a80_mod0_data,
+			       &sun4i_a10_mod0_lock, reg);
+}
+CLK_OF_DECLARE(sun9i_a80_mod0, "allwinner,sun9i-a80-mod0-clk", sun9i_a80_mod0_setup);
+
+static DEFINE_SPINLOCK(sun5i_a13_mbus_lock);
+
+static void __init sun5i_a13_mbus_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_iomap(node, 0);
+	if (!reg) {
+		pr_err("Could not get registers for a13-mbus-clk\n");
+		return;
+	}
+
+	/* The MBUS clocks needs to be always enabled */
+	sunxi_factors_register_critical(node, &sun4i_a10_mod0_data,
+					&sun5i_a13_mbus_lock, reg);
+}
+CLK_OF_DECLARE(sun5i_a13_mbus, "allwinner,sun5i-a13-mbus-clk", sun5i_a13_mbus_setup);
+
+struct mmc_phase {
+	struct clk_hw		hw;
+	u8			offset;
+	void __iomem		*reg;
+	spinlock_t		*lock;
+};
+
+#define to_mmc_phase(_hw) container_of(_hw, struct mmc_phase, hw)
+
+static int mmc_get_phase(struct clk_hw *hw)
+{
+	struct clk *mmc, *mmc_parent, *clk = hw->clk;
+	struct mmc_phase *phase = to_mmc_phase(hw);
+	unsigned int mmc_rate, mmc_parent_rate;
+	u16 step, mmc_div;
+	u32 value;
+	u8 delay;
+
+	value = readl(phase->reg);
+	delay = (value >> phase->offset) & 0x3;
+
+	if (!delay)
+		return 180;
+
+	/* Get the main MMC clock */
+	mmc = clk_get_parent(clk);
+	if (!mmc)
+		return -EINVAL;
+
+	/* And its rate */
+	mmc_rate = clk_get_rate(mmc);
+	if (!mmc_rate)
+		return -EINVAL;
+
+	/* Now, get the MMC parent (most likely some PLL) */
+	mmc_parent = clk_get_parent(mmc);
+	if (!mmc_parent)
+		return -EINVAL;
+
+	/* And its rate */
+	mmc_parent_rate = clk_get_rate(mmc_parent);
+	if (!mmc_parent_rate)
+		return -EINVAL;
+
+	/* Get MMC clock divider */
+	mmc_div = mmc_parent_rate / mmc_rate;
+
+	step = DIV_ROUND_CLOSEST(360, mmc_div);
+	return delay * step;
+}
+
+static int mmc_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct clk *mmc, *mmc_parent, *clk = hw->clk;
+	struct mmc_phase *phase = to_mmc_phase(hw);
+	unsigned int mmc_rate, mmc_parent_rate;
+	unsigned long flags;
+	u32 value;
+	u8 delay;
+
+	/* Get the main MMC clock */
+	mmc = clk_get_parent(clk);
+	if (!mmc)
+		return -EINVAL;
+
+	/* And its rate */
+	mmc_rate = clk_get_rate(mmc);
+	if (!mmc_rate)
+		return -EINVAL;
+
+	/* Now, get the MMC parent (most likely some PLL) */
+	mmc_parent = clk_get_parent(mmc);
+	if (!mmc_parent)
+		return -EINVAL;
+
+	/* And its rate */
+	mmc_parent_rate = clk_get_rate(mmc_parent);
+	if (!mmc_parent_rate)
+		return -EINVAL;
+
+	if (degrees != 180) {
+		u16 step, mmc_div;
+
+		/* Get MMC clock divider */
+		mmc_div = mmc_parent_rate / mmc_rate;
+
+		/*
+		 * We can only outphase the clocks by multiple of the
+		 * PLL's period.
+		 *
+		 * Since the MMC clock in only a divider, and the
+		 * formula to get the outphasing in degrees is deg =
+		 * 360 * delta / period
+		 *
+		 * If we simplify this formula, we can see that the
+		 * only thing that we're concerned about is the number
+		 * of period we want to outphase our clock from, and
+		 * the divider set by the MMC clock.
+		 */
+		step = DIV_ROUND_CLOSEST(360, mmc_div);
+		delay = DIV_ROUND_CLOSEST(degrees, step);
+	} else {
+		delay = 0;
+	}
+
+	spin_lock_irqsave(phase->lock, flags);
+	value = readl(phase->reg);
+	value &= ~GENMASK(phase->offset + 3, phase->offset);
+	value |= delay << phase->offset;
+	writel(value, phase->reg);
+	spin_unlock_irqrestore(phase->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops mmc_clk_ops = {
+	.get_phase	= mmc_get_phase,
+	.set_phase	= mmc_set_phase,
+};
+
+/*
+ * sunxi_mmc_setup - Common setup function for mmc module clocks
+ *
+ * The only difference between module clocks on different platforms is the
+ * width of the mux register bits and the valid values, which are passed in
+ * through struct factors_data. The phase clocks parts are identical.
+ */
+static void __init sunxi_mmc_setup(struct device_node *node,
+				   const struct factors_data *data,
+				   spinlock_t *lock)
+{
+	struct clk_onecell_data *clk_data;
+	const char *parent;
+	void __iomem *reg;
+	int i;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("Couldn't map the %pOFn clock registers\n", node);
+		return;
+	}
+
+	clk_data = kmalloc_obj(*clk_data);
+	if (!clk_data)
+		return;
+
+	clk_data->clks = kzalloc_objs(*clk_data->clks, 3);
+	if (!clk_data->clks)
+		goto err_free_data;
+
+	clk_data->clk_num = 3;
+	clk_data->clks[0] = sunxi_factors_register(node, data, lock, reg);
+	if (!clk_data->clks[0])
+		goto err_free_clks;
+
+	parent = __clk_get_name(clk_data->clks[0]);
+
+	for (i = 1; i < 3; i++) {
+		struct clk_init_data init = {
+			.num_parents	= 1,
+			.parent_names	= &parent,
+			.ops		= &mmc_clk_ops,
+		};
+		struct mmc_phase *phase;
+
+		phase = kmalloc_obj(*phase);
+		if (!phase)
+			continue;
+
+		phase->hw.init = &init;
+		phase->reg = reg;
+		phase->lock = lock;
+
+		if (i == 1)
+			phase->offset = 8;
+		else
+			phase->offset = 20;
+
+		if (of_property_read_string_index(node, "clock-output-names",
+						  i, &init.name))
+			init.name = node->name;
+
+		clk_data->clks[i] = clk_register(NULL, &phase->hw);
+		if (IS_ERR(clk_data->clks[i])) {
+			kfree(phase);
+			continue;
+		}
+	}
+
+	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	return;
+
+err_free_clks:
+	kfree(clk_data->clks);
+err_free_data:
+	kfree(clk_data);
+}
+
+static DEFINE_SPINLOCK(sun4i_a10_mmc_lock);
+
+static void __init sun4i_a10_mmc_setup(struct device_node *node)
+{
+	sunxi_mmc_setup(node, &sun4i_a10_mod0_data, &sun4i_a10_mmc_lock);
+}
+CLK_OF_DECLARE(sun4i_a10_mmc, "allwinner,sun4i-a10-mmc-clk", sun4i_a10_mmc_setup);
+
+static DEFINE_SPINLOCK(sun9i_a80_mmc_lock);
+
+static void __init sun9i_a80_mmc_setup(struct device_node *node)
+{
+	sunxi_mmc_setup(node, &sun9i_a80_mod0_data, &sun9i_a80_mmc_lock);
+}
+CLK_OF_DECLARE(sun9i_a80_mmc, "allwinner,sun9i-a80-mmc-clk", sun9i_a80_mmc_setup);

linux-7.2.3/drivers/clk/sunxi/clk-simple-gates.c

@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+static DEFINE_SPINLOCK(gates_lock);
+
+static void __init sunxi_simple_gates_setup(struct device_node *node,
+					    const int protected[],
+					    int nprotected)
+{
+	struct clk_onecell_data *clk_data;
+	const char *clk_parent, *clk_name;
+	struct resource res;
+	void __iomem *clk_reg;
+	void __iomem *reg;
+	int number, i = 0, j;
+	u8 clk_bit;
+	u32 index;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg))
+		return;
+
+	clk_parent = of_clk_get_parent_name(node, 0);
+
+	clk_data = kmalloc_obj(struct clk_onecell_data);
+	if (!clk_data)
+		goto err_unmap;
+
+	number = of_property_count_u32_elems(node, "clock-indices");
+	of_property_read_u32_index(node, "clock-indices", number - 1, &number);
+
+	clk_data->clks = kzalloc_objs(struct clk *, number + 1);
+	if (!clk_data->clks)
+		goto err_free_data;
+
+	of_property_for_each_u32(node, "clock-indices", index) {
+		of_property_read_string_index(node, "clock-output-names",
+					      i, &clk_name);
+
+		clk_reg = reg + 4 * (index / 32);
+		clk_bit = index % 32;
+
+		clk_data->clks[index] = clk_register_gate(NULL, clk_name,
+							  clk_parent, 0,
+							  clk_reg,
+							  clk_bit,
+							  0, &gates_lock);
+		i++;
+
+		if (IS_ERR(clk_data->clks[index])) {
+			WARN_ON(true);
+			continue;
+		}
+
+		for (j = 0; j < nprotected; j++)
+			if (protected[j] == index)
+				clk_prepare_enable(clk_data->clks[index]);
+
+	}
+
+	clk_data->clk_num = number + 1;
+	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	return;
+
+err_free_data:
+	kfree(clk_data);
+err_unmap:
+	iounmap(reg);
+	of_address_to_resource(node, 0, &res);
+	release_mem_region(res.start, resource_size(&res));
+}
+
+static void __init sunxi_simple_gates_init(struct device_node *node)
+{
+	sunxi_simple_gates_setup(node, NULL, 0);
+}
+
+CLK_OF_DECLARE(sun4i_a10_gates, "allwinner,sun4i-a10-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun4i_a10_apb0, "allwinner,sun4i-a10-apb0-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun4i_a10_apb1, "allwinner,sun4i-a10-apb1-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun4i_a10_axi, "allwinner,sun4i-a10-axi-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun5i_a10s_apb0, "allwinner,sun5i-a10s-apb0-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun5i_a10s_apb1, "allwinner,sun5i-a10s-apb1-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun5i_a13_apb0, "allwinner,sun5i-a13-apb0-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun5i_a13_apb1, "allwinner,sun5i-a13-apb1-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun6i_a31_ahb1, "allwinner,sun6i-a31-ahb1-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun6i_a31_apb1, "allwinner,sun6i-a31-apb1-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun6i_a31_apb2, "allwinner,sun6i-a31-apb2-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun7i_a20_apb0, "allwinner,sun7i-a20-apb0-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun7i_a20_apb1, "allwinner,sun7i-a20-apb1-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun8i_a23_ahb1, "allwinner,sun8i-a23-ahb1-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun8i_a23_apb1, "allwinner,sun8i-a23-apb1-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun8i_a23_apb2, "allwinner,sun8i-a23-apb2-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun8i_a33_ahb1, "allwinner,sun8i-a33-ahb1-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun8i_a83t_apb0, "allwinner,sun8i-a83t-apb0-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun9i_a80_ahb0, "allwinner,sun9i-a80-ahb0-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun9i_a80_ahb1, "allwinner,sun9i-a80-ahb1-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun9i_a80_ahb2, "allwinner,sun9i-a80-ahb2-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun9i_a80_apb0, "allwinner,sun9i-a80-apb0-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun9i_a80_apb1, "allwinner,sun9i-a80-apb1-gates-clk",
+	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun9i_a80_apbs, "allwinner,sun9i-a80-apbs-gates-clk",
+	       sunxi_simple_gates_init);
+
+static const int sun4i_a10_ahb_critical_clocks[] __initconst = {
+	14,	/* ahb_sdram */
+};
+
+static void __init sun4i_a10_ahb_init(struct device_node *node)
+{
+	sunxi_simple_gates_setup(node, sun4i_a10_ahb_critical_clocks,
+				 ARRAY_SIZE(sun4i_a10_ahb_critical_clocks));
+}
+CLK_OF_DECLARE(sun4i_a10_ahb, "allwinner,sun4i-a10-ahb-gates-clk",
+	       sun4i_a10_ahb_init);
+CLK_OF_DECLARE(sun5i_a10s_ahb, "allwinner,sun5i-a10s-ahb-gates-clk",
+	       sun4i_a10_ahb_init);
+CLK_OF_DECLARE(sun5i_a13_ahb, "allwinner,sun5i-a13-ahb-gates-clk",
+	       sun4i_a10_ahb_init);
+CLK_OF_DECLARE(sun7i_a20_ahb, "allwinner,sun7i-a20-ahb-gates-clk",
+	       sun4i_a10_ahb_init);
+
+static const int sun4i_a10_dram_critical_clocks[] __initconst = {
+	15,	/* dram_output */
+};
+
+static void __init sun4i_a10_dram_init(struct device_node *node)
+{
+	sunxi_simple_gates_setup(node, sun4i_a10_dram_critical_clocks,
+				 ARRAY_SIZE(sun4i_a10_dram_critical_clocks));
+}
+CLK_OF_DECLARE(sun4i_a10_dram, "allwinner,sun4i-a10-dram-gates-clk",
+	       sun4i_a10_dram_init);

linux-7.2.3/drivers/clk/sunxi/clk-sun4i-display.c

@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+struct sun4i_a10_display_clk_data {
+	bool	has_div;
+	u8	num_rst;
+	u8	parents;
+
+	u8	offset_en;
+	u8	offset_div;
+	u8	offset_mux;
+	u8	offset_rst;
+
+	u8	width_div;
+	u8	width_mux;
+
+	u32	flags;
+};
+
+struct reset_data {
+	void __iomem			*reg;
+	spinlock_t			*lock;
+	struct reset_controller_dev	rcdev;
+	u8				offset;
+};
+
+static DEFINE_SPINLOCK(sun4i_a10_display_lock);
+
+static inline struct reset_data *rcdev_to_reset_data(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct reset_data, rcdev);
+};
+
+static int sun4i_a10_display_assert(struct reset_controller_dev *rcdev,
+				    unsigned long id)
+{
+	struct reset_data *data = rcdev_to_reset_data(rcdev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(data->lock, flags);
+
+	reg = readl(data->reg);
+	writel(reg & ~BIT(data->offset + id), data->reg);
+
+	spin_unlock_irqrestore(data->lock, flags);
+
+	return 0;
+}
+
+static int sun4i_a10_display_deassert(struct reset_controller_dev *rcdev,
+				      unsigned long id)
+{
+	struct reset_data *data = rcdev_to_reset_data(rcdev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(data->lock, flags);
+
+	reg = readl(data->reg);
+	writel(reg | BIT(data->offset + id), data->reg);
+
+	spin_unlock_irqrestore(data->lock, flags);
+
+	return 0;
+}
+
+static int sun4i_a10_display_status(struct reset_controller_dev *rcdev,
+				    unsigned long id)
+{
+	struct reset_data *data = rcdev_to_reset_data(rcdev);
+
+	return !(readl(data->reg) & BIT(data->offset + id));
+}
+
+static const struct reset_control_ops sun4i_a10_display_reset_ops = {
+	.assert		= sun4i_a10_display_assert,
+	.deassert	= sun4i_a10_display_deassert,
+	.status		= sun4i_a10_display_status,
+};
+
+static int sun4i_a10_display_reset_xlate(struct reset_controller_dev *rcdev,
+					 const struct of_phandle_args *spec)
+{
+	/* We only have a single reset signal */
+	return 0;
+}
+
+static void __init sun4i_a10_display_init(struct device_node *node,
+					  const struct sun4i_a10_display_clk_data *data)
+{
+	const char *parents[4];
+	const char *clk_name = node->name;
+	struct reset_data *reset_data;
+	struct clk_divider *div = NULL;
+	struct clk_gate *gate;
+	struct resource res;
+	struct clk_mux *mux;
+	void __iomem *reg;
+	struct clk *clk;
+	int ret;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n", clk_name);
+		return;
+	}
+
+	ret = of_clk_parent_fill(node, parents, data->parents);
+	if (ret != data->parents) {
+		pr_err("%s: Could not retrieve the parents\n", clk_name);
+		goto unmap;
+	}
+
+	mux = kzalloc_obj(*mux);
+	if (!mux)
+		goto unmap;
+
+	mux->reg = reg;
+	mux->shift = data->offset_mux;
+	mux->mask = (1 << data->width_mux) - 1;
+	mux->lock = &sun4i_a10_display_lock;
+
+	gate = kzalloc_obj(*gate);
+	if (!gate)
+		goto free_mux;
+
+	gate->reg = reg;
+	gate->bit_idx = data->offset_en;
+	gate->lock = &sun4i_a10_display_lock;
+
+	if (data->has_div) {
+		div = kzalloc_obj(*div);
+		if (!div)
+			goto free_gate;
+
+		div->reg = reg;
+		div->shift = data->offset_div;
+		div->width = data->width_div;
+		div->lock = &sun4i_a10_display_lock;
+	}
+
+	clk = clk_register_composite(NULL, clk_name,
+				     parents, data->parents,
+				     &mux->hw, &clk_mux_ops,
+				     data->has_div ? &div->hw : NULL,
+				     data->has_div ? &clk_divider_ops : NULL,
+				     &gate->hw, &clk_gate_ops,
+				     data->flags);
+	if (IS_ERR(clk)) {
+		pr_err("%s: Couldn't register the clock\n", clk_name);
+		goto free_div;
+	}
+
+	ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	if (ret) {
+		pr_err("%s: Couldn't register DT provider\n", clk_name);
+		goto free_clk;
+	}
+
+	if (!data->num_rst)
+		return;
+
+	reset_data = kzalloc_obj(*reset_data);
+	if (!reset_data)
+		goto free_of_clk;
+
+	reset_data->reg = reg;
+	reset_data->offset = data->offset_rst;
+	reset_data->lock = &sun4i_a10_display_lock;
+	reset_data->rcdev.nr_resets = data->num_rst;
+	reset_data->rcdev.ops = &sun4i_a10_display_reset_ops;
+	reset_data->rcdev.of_node = node;
+
+	if (data->num_rst == 1) {
+		reset_data->rcdev.of_reset_n_cells = 0;
+		reset_data->rcdev.of_xlate = &sun4i_a10_display_reset_xlate;
+	} else {
+		reset_data->rcdev.of_reset_n_cells = 1;
+	}
+
+	if (reset_controller_register(&reset_data->rcdev)) {
+		pr_err("%s: Couldn't register the reset controller\n",
+		       clk_name);
+		goto free_reset;
+	}
+
+	return;
+
+free_reset:
+	kfree(reset_data);
+free_of_clk:
+	of_clk_del_provider(node);
+free_clk:
+	clk_unregister_composite(clk);
+free_div:
+	kfree(div);
+free_gate:
+	kfree(gate);
+free_mux:
+	kfree(mux);
+unmap:
+	iounmap(reg);
+	of_address_to_resource(node, 0, &res);
+	release_mem_region(res.start, resource_size(&res));
+}
+
+static const struct sun4i_a10_display_clk_data sun4i_a10_tcon_ch0_data __initconst = {
+	.num_rst	= 2,
+	.parents	= 4,
+	.offset_en	= 31,
+	.offset_rst	= 29,
+	.offset_mux	= 24,
+	.width_mux	= 2,
+	.flags		= CLK_SET_RATE_PARENT,
+};
+
+static void __init sun4i_a10_tcon_ch0_setup(struct device_node *node)
+{
+	sun4i_a10_display_init(node, &sun4i_a10_tcon_ch0_data);
+}
+CLK_OF_DECLARE(sun4i_a10_tcon_ch0, "allwinner,sun4i-a10-tcon-ch0-clk",
+	       sun4i_a10_tcon_ch0_setup);
+
+static const struct sun4i_a10_display_clk_data sun4i_a10_display_data __initconst = {
+	.has_div	= true,
+	.num_rst	= 1,
+	.parents	= 3,
+	.offset_en	= 31,
+	.offset_rst	= 30,
+	.offset_mux	= 24,
+	.offset_div	= 0,
+	.width_mux	= 2,
+	.width_div	= 4,
+};
+
+static void __init sun4i_a10_display_setup(struct device_node *node)
+{
+	sun4i_a10_display_init(node, &sun4i_a10_display_data);
+}
+CLK_OF_DECLARE(sun4i_a10_display, "allwinner,sun4i-a10-display-clk",
+	       sun4i_a10_display_setup);

linux-7.2.3/drivers/clk/sunxi/clk-sun4i-pll3.c

@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define SUN4I_A10_PLL3_GATE_BIT	31
+#define SUN4I_A10_PLL3_DIV_WIDTH	7
+#define SUN4I_A10_PLL3_DIV_SHIFT	0
+
+static DEFINE_SPINLOCK(sun4i_a10_pll3_lock);
+
+static void __init sun4i_a10_pll3_setup(struct device_node *node)
+{
+	const char *clk_name = node->name, *parent;
+	struct clk_multiplier *mult;
+	struct clk_gate *gate;
+	struct resource res;
+	void __iomem *reg;
+	struct clk *clk;
+	int ret;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+	parent = of_clk_get_parent_name(node, 0);
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n", clk_name);
+		return;
+	}
+
+	gate = kzalloc_obj(*gate);
+	if (!gate)
+		goto err_unmap;
+
+	gate->reg = reg;
+	gate->bit_idx = SUN4I_A10_PLL3_GATE_BIT;
+	gate->lock = &sun4i_a10_pll3_lock;
+
+	mult = kzalloc_obj(*mult);
+	if (!mult)
+		goto err_free_gate;
+
+	mult->reg = reg;
+	mult->shift = SUN4I_A10_PLL3_DIV_SHIFT;
+	mult->width = SUN4I_A10_PLL3_DIV_WIDTH;
+	mult->lock = &sun4i_a10_pll3_lock;
+
+	clk = clk_register_composite(NULL, clk_name,
+				     &parent, 1,
+				     NULL, NULL,
+				     &mult->hw, &clk_multiplier_ops,
+				     &gate->hw, &clk_gate_ops,
+				     0);
+	if (IS_ERR(clk)) {
+		pr_err("%s: Couldn't register the clock\n", clk_name);
+		goto err_free_mult;
+	}
+
+	ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	if (ret) {
+		pr_err("%s: Couldn't register DT provider\n",
+		       clk_name);
+		goto err_clk_unregister;
+	}
+
+	return;
+
+err_clk_unregister:
+	clk_unregister_composite(clk);
+err_free_mult:
+	kfree(mult);
+err_free_gate:
+	kfree(gate);
+err_unmap:
+	iounmap(reg);
+	of_address_to_resource(node, 0, &res);
+	release_mem_region(res.start, resource_size(&res));
+}
+
+CLK_OF_DECLARE(sun4i_a10_pll3, "allwinner,sun4i-a10-pll3-clk",
+	       sun4i_a10_pll3_setup);

linux-7.2.3/drivers/clk/sunxi/clk-sun4i-tcon-ch1.c

@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define TCON_CH1_SCLK2_PARENTS		4
+
+#define TCON_CH1_SCLK2_GATE_BIT		BIT(31)
+#define TCON_CH1_SCLK2_MUX_MASK		3
+#define TCON_CH1_SCLK2_MUX_SHIFT	24
+#define TCON_CH1_SCLK2_DIV_MASK		0xf
+#define TCON_CH1_SCLK2_DIV_SHIFT	0
+
+#define TCON_CH1_SCLK1_GATE_BIT		BIT(15)
+#define TCON_CH1_SCLK1_HALF_BIT		BIT(11)
+
+struct tcon_ch1_clk {
+	struct clk_hw	hw;
+	spinlock_t	lock;
+	void __iomem	*reg;
+};
+
+#define hw_to_tclk(hw)	container_of(hw, struct tcon_ch1_clk, hw)
+
+static void tcon_ch1_disable(struct clk_hw *hw)
+{
+	struct tcon_ch1_clk *tclk = hw_to_tclk(hw);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&tclk->lock, flags);
+	reg = readl(tclk->reg);
+	reg &= ~(TCON_CH1_SCLK2_GATE_BIT | TCON_CH1_SCLK1_GATE_BIT);
+	writel(reg, tclk->reg);
+	spin_unlock_irqrestore(&tclk->lock, flags);
+}
+
+static int tcon_ch1_enable(struct clk_hw *hw)
+{
+	struct tcon_ch1_clk *tclk = hw_to_tclk(hw);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&tclk->lock, flags);
+	reg = readl(tclk->reg);
+	reg |= TCON_CH1_SCLK2_GATE_BIT | TCON_CH1_SCLK1_GATE_BIT;
+	writel(reg, tclk->reg);
+	spin_unlock_irqrestore(&tclk->lock, flags);
+
+	return 0;
+}
+
+static int tcon_ch1_is_enabled(struct clk_hw *hw)
+{
+	struct tcon_ch1_clk *tclk = hw_to_tclk(hw);
+	u32 reg;
+
+	reg = readl(tclk->reg);
+	return reg & (TCON_CH1_SCLK2_GATE_BIT | TCON_CH1_SCLK1_GATE_BIT);
+}
+
+static u8 tcon_ch1_get_parent(struct clk_hw *hw)
+{
+	struct tcon_ch1_clk *tclk = hw_to_tclk(hw);
+	u32 reg;
+
+	reg = readl(tclk->reg) >> TCON_CH1_SCLK2_MUX_SHIFT;
+	reg &= reg >> TCON_CH1_SCLK2_MUX_MASK;
+
+	return reg;
+}
+
+static int tcon_ch1_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct tcon_ch1_clk *tclk = hw_to_tclk(hw);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&tclk->lock, flags);
+	reg = readl(tclk->reg);
+	reg &= ~(TCON_CH1_SCLK2_MUX_MASK << TCON_CH1_SCLK2_MUX_SHIFT);
+	reg |= index << TCON_CH1_SCLK2_MUX_SHIFT;
+	writel(reg, tclk->reg);
+	spin_unlock_irqrestore(&tclk->lock, flags);
+
+	return 0;
+};
+
+static unsigned long tcon_ch1_calc_divider(unsigned long rate,
+					   unsigned long parent_rate,
+					   u8 *div,
+					   bool *half)
+{
+	unsigned long best_rate = 0;
+	u8 best_m = 0, m;
+	bool is_double;
+
+	for (m = 1; m < 16; m++) {
+		u8 d;
+
+		for (d = 1; d < 3; d++) {
+			unsigned long tmp_rate;
+
+			tmp_rate = parent_rate / m / d;
+
+			if (tmp_rate > rate)
+				continue;
+
+			if (!best_rate ||
+			    (rate - tmp_rate) < (rate - best_rate)) {
+				best_rate = tmp_rate;
+				best_m = m;
+				is_double = d;
+			}
+		}
+	}
+
+	if (div && half) {
+		*div = best_m;
+		*half = is_double;
+	}
+
+	return best_rate;
+}
+
+static int tcon_ch1_determine_rate(struct clk_hw *hw,
+				   struct clk_rate_request *req)
+{
+	long best_rate = -EINVAL;
+	int i;
+
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
+		unsigned long parent_rate;
+		unsigned long tmp_rate;
+		struct clk_hw *parent;
+
+		parent = clk_hw_get_parent_by_index(hw, i);
+		if (!parent)
+			continue;
+
+		parent_rate = clk_hw_get_rate(parent);
+
+		tmp_rate = tcon_ch1_calc_divider(req->rate, parent_rate,
+						 NULL, NULL);
+
+		if (best_rate < 0 ||
+		    (req->rate - tmp_rate) < (req->rate - best_rate)) {
+			best_rate = tmp_rate;
+			req->best_parent_rate = parent_rate;
+			req->best_parent_hw = parent;
+		}
+	}
+
+	if (best_rate < 0)
+		return best_rate;
+
+	req->rate = best_rate;
+	return 0;
+}
+
+static unsigned long tcon_ch1_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct tcon_ch1_clk *tclk = hw_to_tclk(hw);
+	u32 reg;
+
+	reg = readl(tclk->reg);
+
+	parent_rate /= (reg & TCON_CH1_SCLK2_DIV_MASK) + 1;
+
+	if (reg & TCON_CH1_SCLK1_HALF_BIT)
+		parent_rate /= 2;
+
+	return parent_rate;
+}
+
+static int tcon_ch1_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
+{
+	struct tcon_ch1_clk *tclk = hw_to_tclk(hw);
+	unsigned long flags;
+	bool half;
+	u8 div_m;
+	u32 reg;
+
+	tcon_ch1_calc_divider(rate, parent_rate, &div_m, &half);
+
+	spin_lock_irqsave(&tclk->lock, flags);
+	reg = readl(tclk->reg);
+	reg &= ~(TCON_CH1_SCLK2_DIV_MASK | TCON_CH1_SCLK1_HALF_BIT);
+	reg |= (div_m - 1) & TCON_CH1_SCLK2_DIV_MASK;
+
+	if (half)
+		reg |= TCON_CH1_SCLK1_HALF_BIT;
+
+	writel(reg, tclk->reg);
+	spin_unlock_irqrestore(&tclk->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops tcon_ch1_ops = {
+	.disable	= tcon_ch1_disable,
+	.enable		= tcon_ch1_enable,
+	.is_enabled	= tcon_ch1_is_enabled,
+
+	.get_parent	= tcon_ch1_get_parent,
+	.set_parent	= tcon_ch1_set_parent,
+
+	.determine_rate	= tcon_ch1_determine_rate,
+	.recalc_rate	= tcon_ch1_recalc_rate,
+	.set_rate	= tcon_ch1_set_rate,
+};
+
+static void __init tcon_ch1_setup(struct device_node *node)
+{
+	const char *parents[TCON_CH1_SCLK2_PARENTS];
+	const char *clk_name = node->name;
+	struct clk_init_data init;
+	struct tcon_ch1_clk *tclk;
+	struct resource res;
+	struct clk *clk;
+	void __iomem *reg;
+	int ret;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n", clk_name);
+		return;
+	}
+
+	ret = of_clk_parent_fill(node, parents, TCON_CH1_SCLK2_PARENTS);
+	if (ret != TCON_CH1_SCLK2_PARENTS) {
+		pr_err("%s Could not retrieve the parents\n", clk_name);
+		goto err_unmap;
+	}
+
+	tclk = kzalloc_obj(*tclk);
+	if (!tclk)
+		goto err_unmap;
+
+	init.name = clk_name;
+	init.ops = &tcon_ch1_ops;
+	init.parent_names = parents;
+	init.num_parents = TCON_CH1_SCLK2_PARENTS;
+	init.flags = CLK_SET_RATE_PARENT;
+
+	tclk->reg = reg;
+	tclk->hw.init = &init;
+	spin_lock_init(&tclk->lock);
+
+	clk = clk_register(NULL, &tclk->hw);
+	if (IS_ERR(clk)) {
+		pr_err("%s: Couldn't register the clock\n", clk_name);
+		goto err_free_data;
+	}
+
+	ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	if (ret) {
+		pr_err("%s: Couldn't register our clock provider\n", clk_name);
+		goto err_unregister_clk;
+	}
+
+	return;
+
+err_unregister_clk:
+	clk_unregister(clk);
+err_free_data:
+	kfree(tclk);
+err_unmap:
+	iounmap(reg);
+	of_address_to_resource(node, 0, &res);
+	release_mem_region(res.start, resource_size(&res));
+}
+
+CLK_OF_DECLARE(tcon_ch1, "allwinner,sun4i-a10-tcon-ch1-clk",
+	       tcon_ch1_setup);

linux-7.2.3/drivers/clk/sunxi/clk-sun6i-apb0-gates.c

@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Free Electrons
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * Allwinner A31 APB0 clock gates driver
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define SUN6I_APB0_GATES_MAX_SIZE	32
+
+struct gates_data {
+	DECLARE_BITMAP(mask, SUN6I_APB0_GATES_MAX_SIZE);
+};
+
+static const struct gates_data sun6i_a31_apb0_gates __initconst = {
+	.mask = {0x7F},
+};
+
+static const struct gates_data sun8i_a23_apb0_gates __initconst = {
+	.mask = {0x5D},
+};
+
+static const struct of_device_id sun6i_a31_apb0_gates_clk_dt_ids[] = {
+	{ .compatible = "allwinner,sun6i-a31-apb0-gates-clk", .data = &sun6i_a31_apb0_gates },
+	{ .compatible = "allwinner,sun8i-a23-apb0-gates-clk", .data = &sun8i_a23_apb0_gates },
+	{ /* sentinel */ }
+};
+
+static int sun6i_a31_apb0_gates_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct clk_onecell_data *clk_data;
+	const struct gates_data *data;
+	const char *clk_parent;
+	const char *clk_name;
+	void __iomem *reg;
+	int ngates;
+	int i;
+	int j = 0;
+
+	if (!np)
+		return -ENODEV;
+
+	data = of_device_get_match_data(&pdev->dev);
+	if (!data)
+		return -ENODEV;
+
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	clk_parent = of_clk_get_parent_name(np, 0);
+	if (!clk_parent)
+		return -EINVAL;
+
+	clk_data = devm_kzalloc(&pdev->dev, sizeof(struct clk_onecell_data),
+				GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	/* Worst-case size approximation and memory allocation */
+	ngates = find_last_bit(data->mask, SUN6I_APB0_GATES_MAX_SIZE);
+	clk_data->clks = devm_kcalloc(&pdev->dev, (ngates + 1),
+				      sizeof(struct clk *), GFP_KERNEL);
+	if (!clk_data->clks)
+		return -ENOMEM;
+
+	for_each_set_bit(i, data->mask, SUN6I_APB0_GATES_MAX_SIZE) {
+		of_property_read_string_index(np, "clock-output-names",
+					      j, &clk_name);
+
+		clk_data->clks[i] = clk_register_gate(&pdev->dev, clk_name,
+						      clk_parent, 0, reg, i,
+						      0, NULL);
+		WARN_ON(IS_ERR(clk_data->clks[i]));
+
+		j++;
+	}
+
+	clk_data->clk_num = ngates + 1;
+
+	return of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
+}
+
+static struct platform_driver sun6i_a31_apb0_gates_clk_driver = {
+	.driver = {
+		.name = "sun6i-a31-apb0-gates-clk",
+		.of_match_table = sun6i_a31_apb0_gates_clk_dt_ids,
+	},
+	.probe = sun6i_a31_apb0_gates_clk_probe,
+};
+builtin_platform_driver(sun6i_a31_apb0_gates_clk_driver);

linux-7.2.3/drivers/clk/sunxi/clk-sun6i-apb0.c

@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Free Electrons
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * Allwinner A31 APB0 clock driver
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+/*
+ * The APB0 clk has a configurable divisor.
+ *
+ * We must use a clk_div_table and not a regular power of 2
+ * divisor here, because the first 2 values divide the clock
+ * by 2.
+ */
+static const struct clk_div_table sun6i_a31_apb0_divs[] = {
+	{ .val = 0, .div = 2, },
+	{ .val = 1, .div = 2, },
+	{ .val = 2, .div = 4, },
+	{ .val = 3, .div = 8, },
+	{ /* sentinel */ },
+};
+
+static int sun6i_a31_apb0_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const char *clk_name = np->name;
+	const char *clk_parent;
+	void __iomem *reg;
+	struct clk *clk;
+
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	clk_parent = of_clk_get_parent_name(np, 0);
+	if (!clk_parent)
+		return -EINVAL;
+
+	of_property_read_string(np, "clock-output-names", &clk_name);
+
+	clk = clk_register_divider_table(&pdev->dev, clk_name, clk_parent,
+					 0, reg, 0, 2, 0, sun6i_a31_apb0_divs,
+					 NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	return of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static const struct of_device_id sun6i_a31_apb0_clk_dt_ids[] = {
+	{ .compatible = "allwinner,sun6i-a31-apb0-clk" },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver sun6i_a31_apb0_clk_driver = {
+	.driver = {
+		.name = "sun6i-a31-apb0-clk",
+		.of_match_table = sun6i_a31_apb0_clk_dt_ids,
+	},
+	.probe = sun6i_a31_apb0_clk_probe,
+};
+builtin_platform_driver(sun6i_a31_apb0_clk_driver);

linux-7.2.3/drivers/clk/sunxi/clk-sun6i-ar100.c

@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Free Electrons
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * Allwinner A31 AR100 clock driver
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include "clk-factors.h"
+
+/*
+ * sun6i_get_ar100_factors - Calculates factors p, m for AR100
+ *
+ * AR100 rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+static void sun6i_get_ar100_factors(struct factors_request *req)
+{
+	unsigned long div;
+	int shift;
+
+	/* clock only divides */
+	if (req->rate > req->parent_rate)
+		req->rate = req->parent_rate;
+
+	div = DIV_ROUND_UP(req->parent_rate, req->rate);
+
+	if (div < 32)
+		shift = 0;
+	else if (div >> 1 < 32)
+		shift = 1;
+	else if (div >> 2 < 32)
+		shift = 2;
+	else
+		shift = 3;
+
+	div >>= shift;
+
+	if (div > 32)
+		div = 32;
+
+	req->rate = (req->parent_rate >> shift) / div;
+	req->m = div - 1;
+	req->p = shift;
+}
+
+static const struct clk_factors_config sun6i_ar100_config = {
+	.mwidth = 5,
+	.mshift = 8,
+	.pwidth = 2,
+	.pshift = 4,
+};
+
+static const struct factors_data sun6i_ar100_data = {
+	.mux = 16,
+	.muxmask = GENMASK(1, 0),
+	.table = &sun6i_ar100_config,
+	.getter = sun6i_get_ar100_factors,
+};
+
+static DEFINE_SPINLOCK(sun6i_ar100_lock);
+
+static int sun6i_a31_ar100_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	void __iomem *reg;
+	struct clk *clk;
+
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	clk = sunxi_factors_register(np, &sun6i_ar100_data, &sun6i_ar100_lock,
+				     reg);
+	if (!clk)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, clk);
+
+	return 0;
+}
+
+static const struct of_device_id sun6i_a31_ar100_clk_dt_ids[] = {
+	{ .compatible = "allwinner,sun6i-a31-ar100-clk" },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver sun6i_a31_ar100_clk_driver = {
+	.driver = {
+		.name = "sun6i-a31-ar100-clk",
+		.of_match_table = sun6i_a31_ar100_clk_dt_ids,
+		.suppress_bind_attrs = true,
+	},
+	.probe = sun6i_a31_ar100_clk_probe,
+};
+builtin_platform_driver(sun6i_a31_ar100_clk_driver);

linux-7.2.3/drivers/clk/sunxi/clk-sun8i-apb0.c

@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Chen-Yu Tsai
+ * Author: Chen-Yu Tsai <wens@csie.org>
+ *
+ * Allwinner A23 APB0 clock driver
+ *
+ * Based on clk-sun6i-apb0.c
+ * Allwinner A31 APB0 clock driver
+ *
+ * Copyright (C) 2014 Free Electrons
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+static struct clk *sun8i_a23_apb0_register(struct device_node *node,
+					   void __iomem *reg)
+{
+	const char *clk_name = node->name;
+	const char *clk_parent;
+	struct clk *clk;
+	int ret;
+
+	clk_parent = of_clk_get_parent_name(node, 0);
+	if (!clk_parent)
+		return ERR_PTR(-EINVAL);
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	/* The A23 APB0 clock is a standard 2 bit wide divider clock */
+	clk = clk_register_divider(NULL, clk_name, clk_parent, 0, reg,
+				   0, 2, 0, NULL);
+	if (IS_ERR(clk))
+		return clk;
+
+	ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	if (ret)
+		goto err_unregister;
+
+	return clk;
+
+err_unregister:
+	clk_unregister_divider(clk);
+
+	return ERR_PTR(ret);
+}
+
+static void sun8i_a23_apb0_setup(struct device_node *node)
+{
+	void __iomem *reg;
+	struct resource res;
+	struct clk *clk;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		/*
+		 * This happens with clk nodes instantiated through mfd,
+		 * as those do not have their resources assigned in the
+		 * device tree. Do not print an error in this case.
+		 */
+		if (PTR_ERR(reg) != -EINVAL)
+			pr_err("Could not get registers for a23-apb0-clk\n");
+
+		return;
+	}
+
+	clk = sun8i_a23_apb0_register(node, reg);
+	if (IS_ERR(clk))
+		goto err_unmap;
+
+	return;
+
+err_unmap:
+	iounmap(reg);
+	of_address_to_resource(node, 0, &res);
+	release_mem_region(res.start, resource_size(&res));
+}
+CLK_OF_DECLARE_DRIVER(sun8i_a23_apb0, "allwinner,sun8i-a23-apb0-clk",
+		      sun8i_a23_apb0_setup);
+
+static int sun8i_a23_apb0_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	void __iomem *reg;
+	struct clk *clk;
+
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	clk = sun8i_a23_apb0_register(np, reg);
+	return PTR_ERR_OR_ZERO(clk);
+}
+
+static const struct of_device_id sun8i_a23_apb0_clk_dt_ids[] = {
+	{ .compatible = "allwinner,sun8i-a23-apb0-clk" },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver sun8i_a23_apb0_clk_driver = {
+	.driver = {
+		.name = "sun8i-a23-apb0-clk",
+		.of_match_table = sun8i_a23_apb0_clk_dt_ids,
+	},
+	.probe = sun8i_a23_apb0_clk_probe,
+};
+builtin_platform_driver(sun8i_a23_apb0_clk_driver);

linux-7.2.3/drivers/clk/sunxi/clk-sun8i-bus-gates.c

@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * Based on clk-simple-gates.c, which is:
+ * Copyright 2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+static DEFINE_SPINLOCK(gates_lock);
+
+static void __init sun8i_h3_bus_gates_init(struct device_node *node)
+{
+	static const char * const names[] = { "ahb1", "ahb2", "apb1", "apb2" };
+	enum { AHB1, AHB2, APB1, APB2, PARENT_MAX } clk_parent;
+	const char *parents[PARENT_MAX];
+	struct clk_onecell_data *clk_data;
+	const char *clk_name;
+	struct resource res;
+	void __iomem *clk_reg;
+	void __iomem *reg;
+	int number, i;
+	u8 clk_bit;
+	int index;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg))
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(names); i++) {
+		int idx = of_property_match_string(node, "clock-names",
+						   names[i]);
+		if (idx < 0)
+			return;
+
+		parents[i] = of_clk_get_parent_name(node, idx);
+	}
+
+	clk_data = kmalloc_obj(struct clk_onecell_data);
+	if (!clk_data)
+		goto err_unmap;
+
+	number = of_property_count_u32_elems(node, "clock-indices");
+	of_property_read_u32_index(node, "clock-indices", number - 1, &number);
+
+	clk_data->clks = kzalloc_objs(struct clk *, number + 1);
+	if (!clk_data->clks)
+		goto err_free_data;
+
+	i = 0;
+	of_property_for_each_u32(node, "clock-indices", index) {
+		of_property_read_string_index(node, "clock-output-names",
+					      i, &clk_name);
+
+		if (index == 17 || (index >= 29 && index <= 31))
+			clk_parent = AHB2;
+		else if (index <= 63 || index >= 128)
+			clk_parent = AHB1;
+		else if (index >= 64 && index <= 95)
+			clk_parent = APB1;
+		else if (index >= 96 && index <= 127)
+			clk_parent = APB2;
+		else {
+			WARN_ON(true);
+			continue;
+		}
+
+		clk_reg = reg + 4 * (index / 32);
+		clk_bit = index % 32;
+
+		clk_data->clks[index] = clk_register_gate(NULL, clk_name,
+							  parents[clk_parent],
+							  0, clk_reg, clk_bit,
+							  0, &gates_lock);
+		i++;
+
+		if (IS_ERR(clk_data->clks[index])) {
+			WARN_ON(true);
+			continue;
+		}
+	}
+
+	clk_data->clk_num = number + 1;
+	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	return;
+
+err_free_data:
+	kfree(clk_data);
+err_unmap:
+	iounmap(reg);
+	of_address_to_resource(node, 0, &res);
+	release_mem_region(res.start, resource_size(&res));
+}
+
+CLK_OF_DECLARE(sun8i_h3_bus_gates, "allwinner,sun8i-h3-bus-gates-clk",
+	       sun8i_h3_bus_gates_init);
+CLK_OF_DECLARE(sun8i_a83t_bus_gates, "allwinner,sun8i-a83t-bus-gates-clk",
+	       sun8i_h3_bus_gates_init);

linux-7.2.3/drivers/clk/sunxi/clk-sun8i-mbus.c

@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/of_address.h>
+
+#define SUN8I_MBUS_ENABLE	31
+#define SUN8I_MBUS_MUX_SHIFT	24
+#define SUN8I_MBUS_MUX_MASK	0x3
+#define SUN8I_MBUS_DIV_SHIFT	0
+#define SUN8I_MBUS_DIV_WIDTH	3
+#define SUN8I_MBUS_MAX_PARENTS	4
+
+static DEFINE_SPINLOCK(sun8i_a23_mbus_lock);
+
+static void __init sun8i_a23_mbus_setup(struct device_node *node)
+{
+	int num_parents = of_clk_get_parent_count(node);
+	const char **parents;
+	const char *clk_name = node->name;
+	struct resource res;
+	struct clk_divider *div;
+	struct clk_gate *gate;
+	struct clk_mux *mux;
+	struct clk *clk;
+	void __iomem *reg;
+	int err;
+
+	parents = kcalloc(num_parents, sizeof(*parents), GFP_KERNEL);
+	if (!parents)
+		return;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("Could not get registers for sun8i-mbus-clk\n");
+		goto err_free_parents;
+	}
+
+	div = kzalloc_obj(*div);
+	if (!div)
+		goto err_unmap;
+
+	mux = kzalloc_obj(*mux);
+	if (!mux)
+		goto err_free_div;
+
+	gate = kzalloc_obj(*gate);
+	if (!gate)
+		goto err_free_mux;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+	of_clk_parent_fill(node, parents, num_parents);
+
+	gate->reg = reg;
+	gate->bit_idx = SUN8I_MBUS_ENABLE;
+	gate->lock = &sun8i_a23_mbus_lock;
+
+	div->reg = reg;
+	div->shift = SUN8I_MBUS_DIV_SHIFT;
+	div->width = SUN8I_MBUS_DIV_WIDTH;
+	div->lock = &sun8i_a23_mbus_lock;
+
+	mux->reg = reg;
+	mux->shift = SUN8I_MBUS_MUX_SHIFT;
+	mux->mask = SUN8I_MBUS_MUX_MASK;
+	mux->lock = &sun8i_a23_mbus_lock;
+
+	/* The MBUS clocks needs to be always enabled */
+	clk = clk_register_composite(NULL, clk_name, parents, num_parents,
+				     &mux->hw, &clk_mux_ops,
+				     &div->hw, &clk_divider_ops,
+				     &gate->hw, &clk_gate_ops,
+				     CLK_IS_CRITICAL);
+	if (IS_ERR(clk))
+		goto err_free_gate;
+
+	err = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	if (err)
+		goto err_unregister_clk;
+
+	kfree(parents); /* parents is deep copied */
+
+	return;
+
+err_unregister_clk:
+	/* TODO: The composite clock stuff will leak a bit here. */
+	clk_unregister(clk);
+err_free_gate:
+	kfree(gate);
+err_free_mux:
+	kfree(mux);
+err_free_div:
+	kfree(div);
+err_unmap:
+	iounmap(reg);
+	of_address_to_resource(node, 0, &res);
+	release_mem_region(res.start, resource_size(&res));
+err_free_parents:
+	kfree(parents);
+}
+CLK_OF_DECLARE(sun8i_a23_mbus, "allwinner,sun8i-a23-mbus-clk", sun8i_a23_mbus_setup);

linux-7.2.3/drivers/clk/sunxi/clk-sun9i-core.c

@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/log2.h>
+
+#include "clk-factors.h"
+
+
+/*
+ * sun9i_a80_get_pll4_factors() - calculates n, p, m factors for PLL4
+ * PLL4 rate is calculated as follows
+ * rate = (parent_rate * n >> p) / (m + 1);
+ * parent_rate is always 24MHz
+ *
+ * p and m are named div1 and div2 in Allwinner's SDK
+ */
+
+static void sun9i_a80_get_pll4_factors(struct factors_request *req)
+{
+	int n;
+	int m = 1;
+	int p = 1;
+
+	/* Normalize value to a 6 MHz multiple (24 MHz / 4) */
+	n = DIV_ROUND_UP(req->rate, 6000000);
+
+	/* If n is too large switch to steps of 12 MHz */
+	if (n > 255) {
+		m = 0;
+		n = (n + 1) / 2;
+	}
+
+	/* If n is still too large switch to steps of 24 MHz */
+	if (n > 255) {
+		p = 0;
+		n = (n + 1) / 2;
+	}
+
+	/* n must be between 12 and 255 */
+	if (n > 255)
+		n = 255;
+	else if (n < 12)
+		n = 12;
+
+	req->rate = ((24000000 * n) >> p) / (m + 1);
+	req->n = n;
+	req->m = m;
+	req->p = p;
+}
+
+static const struct clk_factors_config sun9i_a80_pll4_config = {
+	.mshift = 18,
+	.mwidth = 1,
+	.nshift = 8,
+	.nwidth = 8,
+	.pshift = 16,
+	.pwidth = 1,
+};
+
+static const struct factors_data sun9i_a80_pll4_data __initconst = {
+	.enable = 31,
+	.table = &sun9i_a80_pll4_config,
+	.getter = sun9i_a80_get_pll4_factors,
+};
+
+static DEFINE_SPINLOCK(sun9i_a80_pll4_lock);
+
+static void __init sun9i_a80_pll4_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("Could not get registers for a80-pll4-clk: %pOFn\n",
+		       node);
+		return;
+	}
+
+	sunxi_factors_register(node, &sun9i_a80_pll4_data,
+			       &sun9i_a80_pll4_lock, reg);
+}
+CLK_OF_DECLARE(sun9i_a80_pll4, "allwinner,sun9i-a80-pll4-clk", sun9i_a80_pll4_setup);
+
+
+/*
+ * sun9i_a80_get_gt_factors() - calculates m factor for GT
+ * GT rate is calculated as follows
+ * rate = parent_rate / (m + 1);
+ */
+
+static void sun9i_a80_get_gt_factors(struct factors_request *req)
+{
+	u32 div;
+
+	if (req->parent_rate < req->rate)
+		req->rate = req->parent_rate;
+
+	div = DIV_ROUND_UP(req->parent_rate, req->rate);
+
+	/* maximum divider is 4 */
+	if (div > 4)
+		div = 4;
+
+	req->rate = req->parent_rate / div;
+	req->m = div;
+}
+
+static const struct clk_factors_config sun9i_a80_gt_config = {
+	.mshift = 0,
+	.mwidth = 2,
+};
+
+static const struct factors_data sun9i_a80_gt_data __initconst = {
+	.mux = 24,
+	.muxmask = BIT(1) | BIT(0),
+	.table = &sun9i_a80_gt_config,
+	.getter = sun9i_a80_get_gt_factors,
+};
+
+static DEFINE_SPINLOCK(sun9i_a80_gt_lock);
+
+static void __init sun9i_a80_gt_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("Could not get registers for a80-gt-clk: %pOFn\n",
+		       node);
+		return;
+	}
+
+	/* The GT bus clock needs to be always enabled */
+	sunxi_factors_register_critical(node, &sun9i_a80_gt_data,
+					&sun9i_a80_gt_lock, reg);
+}
+CLK_OF_DECLARE(sun9i_a80_gt, "allwinner,sun9i-a80-gt-clk", sun9i_a80_gt_setup);
+
+
+/*
+ * sun9i_a80_get_ahb_factors() - calculates p factor for AHB0/1/2
+ * AHB rate is calculated as follows
+ * rate = parent_rate >> p;
+ */
+
+static void sun9i_a80_get_ahb_factors(struct factors_request *req)
+{
+	u32 _p;
+
+	if (req->parent_rate < req->rate)
+		req->rate = req->parent_rate;
+
+	_p = order_base_2(DIV_ROUND_UP(req->parent_rate, req->rate));
+
+	/* maximum p is 3 */
+	if (_p > 3)
+		_p = 3;
+
+	req->rate = req->parent_rate >> _p;
+	req->p = _p;
+}
+
+static const struct clk_factors_config sun9i_a80_ahb_config = {
+	.pshift = 0,
+	.pwidth = 2,
+};
+
+static const struct factors_data sun9i_a80_ahb_data __initconst = {
+	.mux = 24,
+	.muxmask = BIT(1) | BIT(0),
+	.table = &sun9i_a80_ahb_config,
+	.getter = sun9i_a80_get_ahb_factors,
+};
+
+static DEFINE_SPINLOCK(sun9i_a80_ahb_lock);
+
+static void __init sun9i_a80_ahb_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("Could not get registers for a80-ahb-clk: %pOFn\n",
+		       node);
+		return;
+	}
+
+	sunxi_factors_register(node, &sun9i_a80_ahb_data,
+			       &sun9i_a80_ahb_lock, reg);
+}
+CLK_OF_DECLARE(sun9i_a80_ahb, "allwinner,sun9i-a80-ahb-clk", sun9i_a80_ahb_setup);
+
+
+static const struct factors_data sun9i_a80_apb0_data __initconst = {
+	.mux = 24,
+	.muxmask = BIT(0),
+	.table = &sun9i_a80_ahb_config,
+	.getter = sun9i_a80_get_ahb_factors,
+};
+
+static DEFINE_SPINLOCK(sun9i_a80_apb0_lock);
+
+static void __init sun9i_a80_apb0_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("Could not get registers for a80-apb0-clk: %pOFn\n",
+		       node);
+		return;
+	}
+
+	sunxi_factors_register(node, &sun9i_a80_apb0_data,
+			       &sun9i_a80_apb0_lock, reg);
+}
+CLK_OF_DECLARE(sun9i_a80_apb0, "allwinner,sun9i-a80-apb0-clk", sun9i_a80_apb0_setup);
+
+
+/*
+ * sun9i_a80_get_apb1_factors() - calculates m, p factors for APB1
+ * APB1 rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+
+static void sun9i_a80_get_apb1_factors(struct factors_request *req)
+{
+	u32 div;
+
+	if (req->parent_rate < req->rate)
+		req->rate = req->parent_rate;
+
+	div = DIV_ROUND_UP(req->parent_rate, req->rate);
+
+	/* Highest possible divider is 256 (p = 3, m = 31) */
+	if (div > 256)
+		div = 256;
+
+	req->p = order_base_2(div);
+	req->m = (req->parent_rate >> req->p) - 1;
+	req->rate = (req->parent_rate >> req->p) / (req->m + 1);
+}
+
+static const struct clk_factors_config sun9i_a80_apb1_config = {
+	.mshift = 0,
+	.mwidth = 5,
+	.pshift = 16,
+	.pwidth = 2,
+};
+
+static const struct factors_data sun9i_a80_apb1_data __initconst = {
+	.mux = 24,
+	.muxmask = BIT(0),
+	.table = &sun9i_a80_apb1_config,
+	.getter = sun9i_a80_get_apb1_factors,
+};
+
+static DEFINE_SPINLOCK(sun9i_a80_apb1_lock);
+
+static void __init sun9i_a80_apb1_setup(struct device_node *node)
+{
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("Could not get registers for a80-apb1-clk: %pOFn\n",
+		       node);
+		return;
+	}
+
+	sunxi_factors_register(node, &sun9i_a80_apb1_data,
+			       &sun9i_a80_apb1_lock, reg);
+}
+CLK_OF_DECLARE(sun9i_a80_apb1, "allwinner,sun9i-a80-apb1-clk", sun9i_a80_apb1_setup);

linux-7.2.3/drivers/clk/sunxi/clk-sun9i-cpus.c

@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * Allwinner A80 CPUS clock driver
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+static DEFINE_SPINLOCK(sun9i_a80_cpus_lock);
+
+
+#define SUN9I_CPUS_MAX_PARENTS		4
+#define SUN9I_CPUS_MUX_PARENT_PLL4	3
+#define SUN9I_CPUS_MUX_SHIFT		16
+#define SUN9I_CPUS_MUX_MASK		GENMASK(17, 16)
+#define SUN9I_CPUS_MUX_GET_PARENT(reg)	((reg & SUN9I_CPUS_MUX_MASK) >> \
+						SUN9I_CPUS_MUX_SHIFT)
+
+#define SUN9I_CPUS_DIV_SHIFT		4
+#define SUN9I_CPUS_DIV_MASK		GENMASK(5, 4)
+#define SUN9I_CPUS_DIV_GET(reg)		((reg & SUN9I_CPUS_DIV_MASK) >> \
+						SUN9I_CPUS_DIV_SHIFT)
+#define SUN9I_CPUS_DIV_SET(reg, div)	((reg & ~SUN9I_CPUS_DIV_MASK) | \
+						(div << SUN9I_CPUS_DIV_SHIFT))
+#define SUN9I_CPUS_PLL4_DIV_SHIFT	8
+#define SUN9I_CPUS_PLL4_DIV_MASK	GENMASK(12, 8)
+#define SUN9I_CPUS_PLL4_DIV_GET(reg)	((reg & SUN9I_CPUS_PLL4_DIV_MASK) >> \
+						SUN9I_CPUS_PLL4_DIV_SHIFT)
+#define SUN9I_CPUS_PLL4_DIV_SET(reg, div) ((reg & ~SUN9I_CPUS_PLL4_DIV_MASK) | \
+						(div << SUN9I_CPUS_PLL4_DIV_SHIFT))
+
+struct sun9i_a80_cpus_clk {
+	struct clk_hw hw;
+	void __iomem *reg;
+};
+
+#define to_sun9i_a80_cpus_clk(_hw) container_of(_hw, struct sun9i_a80_cpus_clk, hw)
+
+static unsigned long sun9i_a80_cpus_clk_recalc_rate(struct clk_hw *hw,
+						    unsigned long parent_rate)
+{
+	struct sun9i_a80_cpus_clk *cpus = to_sun9i_a80_cpus_clk(hw);
+	unsigned long rate;
+	u32 reg;
+
+	/* Fetch the register value */
+	reg = readl(cpus->reg);
+
+	/* apply pre-divider first if parent is pll4 */
+	if (SUN9I_CPUS_MUX_GET_PARENT(reg) == SUN9I_CPUS_MUX_PARENT_PLL4)
+		parent_rate /= SUN9I_CPUS_PLL4_DIV_GET(reg) + 1;
+
+	/* clk divider */
+	rate = parent_rate / (SUN9I_CPUS_DIV_GET(reg) + 1);
+
+	return rate;
+}
+
+static long sun9i_a80_cpus_clk_round(unsigned long rate, u8 *divp, u8 *pre_divp,
+				     u8 parent, unsigned long parent_rate)
+{
+	u8 div, pre_div = 1;
+
+	/*
+	 * clock can only divide, so we will never be able to achieve
+	 * frequencies higher than the parent frequency
+	 */
+	if (parent_rate && rate > parent_rate)
+		rate = parent_rate;
+
+	div = DIV_ROUND_UP(parent_rate, rate);
+
+	/* calculate pre-divider if parent is pll4 */
+	if (parent == SUN9I_CPUS_MUX_PARENT_PLL4 && div > 4) {
+		/* pre-divider is 1 ~ 32 */
+		if (div < 32) {
+			pre_div = div;
+			div = 1;
+		} else if (div < 64) {
+			pre_div = DIV_ROUND_UP(div, 2);
+			div = 2;
+		} else if (div < 96) {
+			pre_div = DIV_ROUND_UP(div, 3);
+			div = 3;
+		} else {
+			pre_div = DIV_ROUND_UP(div, 4);
+			div = 4;
+		}
+	}
+
+	/* we were asked to pass back divider values */
+	if (divp) {
+		*divp = div - 1;
+		*pre_divp = pre_div - 1;
+	}
+
+	return parent_rate / pre_div / div;
+}
+
+static int sun9i_a80_cpus_clk_determine_rate(struct clk_hw *clk,
+					     struct clk_rate_request *req)
+{
+	struct clk_hw *parent, *best_parent = NULL;
+	int i, num_parents;
+	unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0;
+	unsigned long rate = req->rate;
+
+	/* find the parent that can help provide the fastest rate <= rate */
+	num_parents = clk_hw_get_num_parents(clk);
+	for (i = 0; i < num_parents; i++) {
+		parent = clk_hw_get_parent_by_index(clk, i);
+		if (!parent)
+			continue;
+		if (clk_hw_get_flags(clk) & CLK_SET_RATE_PARENT)
+			parent_rate = clk_hw_round_rate(parent, rate);
+		else
+			parent_rate = clk_hw_get_rate(parent);
+
+		child_rate = sun9i_a80_cpus_clk_round(rate, NULL, NULL, i,
+						      parent_rate);
+
+		if (child_rate <= rate && child_rate > best_child_rate) {
+			best_parent = parent;
+			best = parent_rate;
+			best_child_rate = child_rate;
+		}
+	}
+
+	if (!best_parent)
+		return -EINVAL;
+
+	req->best_parent_hw = best_parent;
+	req->best_parent_rate = best;
+	req->rate = best_child_rate;
+
+	return 0;
+}
+
+static int sun9i_a80_cpus_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+				       unsigned long parent_rate)
+{
+	struct sun9i_a80_cpus_clk *cpus = to_sun9i_a80_cpus_clk(hw);
+	unsigned long flags;
+	u8 div, pre_div, parent;
+	u32 reg;
+
+	spin_lock_irqsave(&sun9i_a80_cpus_lock, flags);
+
+	reg = readl(cpus->reg);
+
+	/* need to know which parent is used to apply pre-divider */
+	parent = SUN9I_CPUS_MUX_GET_PARENT(reg);
+	sun9i_a80_cpus_clk_round(rate, &div, &pre_div, parent, parent_rate);
+
+	reg = SUN9I_CPUS_DIV_SET(reg, div);
+	reg = SUN9I_CPUS_PLL4_DIV_SET(reg, pre_div);
+	writel(reg, cpus->reg);
+
+	spin_unlock_irqrestore(&sun9i_a80_cpus_lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops sun9i_a80_cpus_clk_ops = {
+	.determine_rate	= sun9i_a80_cpus_clk_determine_rate,
+	.recalc_rate	= sun9i_a80_cpus_clk_recalc_rate,
+	.set_rate	= sun9i_a80_cpus_clk_set_rate,
+};
+
+/**
+ * sun9i_a80_cpus_setup() - Setup function for a80 cpus composite clk
+ * @node: &struct device_node for the clock
+ */
+static void sun9i_a80_cpus_setup(struct device_node *node)
+{
+	const char *clk_name = node->name;
+	const char *parents[SUN9I_CPUS_MAX_PARENTS];
+	struct resource res;
+	struct sun9i_a80_cpus_clk *cpus;
+	struct clk_mux *mux;
+	struct clk *clk;
+	int ret;
+
+	cpus = kzalloc_obj(*cpus);
+	if (!cpus)
+		return;
+
+	cpus->reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(cpus->reg))
+		goto err_free_cpus;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	/* we have a mux, we will have >1 parents */
+	ret = of_clk_parent_fill(node, parents, SUN9I_CPUS_MAX_PARENTS);
+
+	mux = kzalloc_obj(*mux);
+	if (!mux)
+		goto err_unmap;
+
+	/* set up clock properties */
+	mux->reg = cpus->reg;
+	mux->shift = SUN9I_CPUS_MUX_SHIFT;
+	/* un-shifted mask is what mux_clk expects */
+	mux->mask = SUN9I_CPUS_MUX_MASK >> SUN9I_CPUS_MUX_SHIFT;
+	mux->lock = &sun9i_a80_cpus_lock;
+
+	clk = clk_register_composite(NULL, clk_name, parents, ret,
+				     &mux->hw, &clk_mux_ops,
+				     &cpus->hw, &sun9i_a80_cpus_clk_ops,
+				     NULL, NULL, 0);
+	if (IS_ERR(clk))
+		goto err_free_mux;
+
+	ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	if (ret)
+		goto err_unregister;
+
+	return;
+
+err_unregister:
+	clk_unregister(clk);
+err_free_mux:
+	kfree(mux);
+err_unmap:
+	iounmap(cpus->reg);
+	of_address_to_resource(node, 0, &res);
+	release_mem_region(res.start, resource_size(&res));
+err_free_cpus:
+	kfree(cpus);
+}
+CLK_OF_DECLARE(sun9i_a80_cpus, "allwinner,sun9i-a80-cpus-clk",
+	       sun9i_a80_cpus_setup);

linux-7.2.3/drivers/clk/sunxi/clk-sun9i-mmc.c

@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai	<wens@csie.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/reset.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define SUN9I_MMC_WIDTH		4
+
+#define SUN9I_MMC_GATE_BIT	16
+#define SUN9I_MMC_RESET_BIT	18
+
+struct sun9i_mmc_clk_data {
+	spinlock_t			lock;
+	void __iomem			*membase;
+	struct clk			*clk;
+	struct reset_control		*reset;
+	struct clk_onecell_data		clk_data;
+	struct reset_controller_dev	rcdev;
+};
+
+static int sun9i_mmc_reset_assert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct sun9i_mmc_clk_data *data = container_of(rcdev,
+						       struct sun9i_mmc_clk_data,
+						       rcdev);
+	unsigned long flags;
+	void __iomem *reg = data->membase + SUN9I_MMC_WIDTH * id;
+	u32 val;
+
+	clk_prepare_enable(data->clk);
+	spin_lock_irqsave(&data->lock, flags);
+
+	val = readl(reg);
+	writel(val & ~BIT(SUN9I_MMC_RESET_BIT), reg);
+
+	spin_unlock_irqrestore(&data->lock, flags);
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static int sun9i_mmc_reset_deassert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct sun9i_mmc_clk_data *data = container_of(rcdev,
+						       struct sun9i_mmc_clk_data,
+						       rcdev);
+	unsigned long flags;
+	void __iomem *reg = data->membase + SUN9I_MMC_WIDTH * id;
+	u32 val;
+
+	clk_prepare_enable(data->clk);
+	spin_lock_irqsave(&data->lock, flags);
+
+	val = readl(reg);
+	writel(val | BIT(SUN9I_MMC_RESET_BIT), reg);
+
+	spin_unlock_irqrestore(&data->lock, flags);
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static int sun9i_mmc_reset_reset(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	sun9i_mmc_reset_assert(rcdev, id);
+	udelay(10);
+	sun9i_mmc_reset_deassert(rcdev, id);
+
+	return 0;
+}
+
+static const struct reset_control_ops sun9i_mmc_reset_ops = {
+	.assert		= sun9i_mmc_reset_assert,
+	.deassert	= sun9i_mmc_reset_deassert,
+	.reset		= sun9i_mmc_reset_reset,
+};
+
+static int sun9i_a80_mmc_config_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sun9i_mmc_clk_data *data;
+	struct clk_onecell_data *clk_data;
+	const char *clk_name = np->name;
+	const char *clk_parent;
+	struct resource *r;
+	int count, i, ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->lock);
+
+	data->membase = devm_platform_get_and_ioremap_resource(pdev, 0, &r);
+	if (IS_ERR(data->membase))
+		return PTR_ERR(data->membase);
+
+	/* one clock/reset pair per word */
+	count = DIV_ROUND_UP((resource_size(r)), SUN9I_MMC_WIDTH);
+
+	clk_data = &data->clk_data;
+	clk_data->clk_num = count;
+	clk_data->clks = devm_kcalloc(&pdev->dev, count, sizeof(struct clk *),
+				      GFP_KERNEL);
+	if (!clk_data->clks)
+		return -ENOMEM;
+
+	data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(data->clk)) {
+		dev_err(&pdev->dev, "Could not get clock\n");
+		return PTR_ERR(data->clk);
+	}
+
+	data->reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(data->reset)) {
+		dev_err(&pdev->dev, "Could not get reset control\n");
+		return PTR_ERR(data->reset);
+	}
+
+	ret = reset_control_deassert(data->reset);
+	if (ret) {
+		dev_err(&pdev->dev, "Reset deassert err %d\n", ret);
+		return ret;
+	}
+
+	clk_parent = __clk_get_name(data->clk);
+	for (i = 0; i < count; i++) {
+		of_property_read_string_index(np, "clock-output-names",
+					      i, &clk_name);
+
+		clk_data->clks[i] = clk_register_gate(&pdev->dev, clk_name,
+						      clk_parent, 0,
+						      data->membase + SUN9I_MMC_WIDTH * i,
+						      SUN9I_MMC_GATE_BIT, 0,
+						      &data->lock);
+
+		if (IS_ERR(clk_data->clks[i])) {
+			ret = PTR_ERR(clk_data->clks[i]);
+			goto err_clk_register;
+		}
+	}
+
+	ret = of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
+	if (ret)
+		goto err_clk_provider;
+
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.nr_resets = count;
+	data->rcdev.ops = &sun9i_mmc_reset_ops;
+	data->rcdev.of_node = pdev->dev.of_node;
+
+	ret = reset_controller_register(&data->rcdev);
+	if (ret)
+		goto err_rc_reg;
+
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+
+err_rc_reg:
+	of_clk_del_provider(np);
+
+err_clk_provider:
+	for (i = 0; i < count; i++)
+		clk_unregister(clk_data->clks[i]);
+
+err_clk_register:
+	reset_control_assert(data->reset);
+
+	return ret;
+}
+
+static const struct of_device_id sun9i_a80_mmc_config_clk_dt_ids[] = {
+	{ .compatible = "allwinner,sun9i-a80-mmc-config-clk" },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver sun9i_a80_mmc_config_clk_driver = {
+	.driver = {
+		.name = "sun9i-a80-mmc-config-clk",
+		.suppress_bind_attrs = true,
+		.of_match_table = sun9i_a80_mmc_config_clk_dt_ids,
+	},
+	.probe = sun9i_a80_mmc_config_clk_probe,
+};
+builtin_platform_driver(sun9i_a80_mmc_config_clk_driver);

linux-7.2.3/drivers/clk/sunxi/clk-usb.c

@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013-2015 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+
+/*
+ * sunxi_usb_reset... - reset bits in usb clk registers handling
+ */
+
+struct usb_reset_data {
+	void __iomem			*reg;
+	spinlock_t			*lock;
+	struct clk			*clk;
+	struct reset_controller_dev	rcdev;
+};
+
+static int sunxi_usb_reset_assert(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct usb_reset_data *data = container_of(rcdev,
+						   struct usb_reset_data,
+						   rcdev);
+	unsigned long flags;
+	u32 reg;
+
+	clk_prepare_enable(data->clk);
+	spin_lock_irqsave(data->lock, flags);
+
+	reg = readl(data->reg);
+	writel(reg & ~BIT(id), data->reg);
+
+	spin_unlock_irqrestore(data->lock, flags);
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static int sunxi_usb_reset_deassert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct usb_reset_data *data = container_of(rcdev,
+						     struct usb_reset_data,
+						     rcdev);
+	unsigned long flags;
+	u32 reg;
+
+	clk_prepare_enable(data->clk);
+	spin_lock_irqsave(data->lock, flags);
+
+	reg = readl(data->reg);
+	writel(reg | BIT(id), data->reg);
+
+	spin_unlock_irqrestore(data->lock, flags);
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static const struct reset_control_ops sunxi_usb_reset_ops = {
+	.assert		= sunxi_usb_reset_assert,
+	.deassert	= sunxi_usb_reset_deassert,
+};
+
+
+#define SUNXI_USB_MAX_SIZE 32
+
+struct usb_clk_data {
+	u32 clk_mask;
+	u32 reset_mask;
+	bool reset_needs_clk;
+};
+
+/**
+ * sunxi_usb_clk_setup() - Setup function for usb gate clocks
+ * @node: &struct device_node for the clock
+ * @data: &struct usb_clk_data for the clock
+ * @lock: spinlock for the clock
+ */
+static void __init sunxi_usb_clk_setup(struct device_node *node,
+				       const struct usb_clk_data *data,
+				       spinlock_t *lock)
+{
+	struct clk_onecell_data *clk_data;
+	struct usb_reset_data *reset_data;
+	const char *clk_parent;
+	const char *clk_name;
+	void __iomem *reg;
+	int qty;
+	int i = 0;
+	int j = 0;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg))
+		return;
+
+	clk_parent = of_clk_get_parent_name(node, 0);
+	if (!clk_parent)
+		return;
+
+	/* Worst-case size approximation and memory allocation */
+	qty = find_last_bit((unsigned long *)&data->clk_mask,
+			    SUNXI_USB_MAX_SIZE);
+
+	clk_data = kmalloc_obj(struct clk_onecell_data);
+	if (!clk_data)
+		return;
+
+	clk_data->clks = kzalloc_objs(struct clk *, qty + 1);
+	if (!clk_data->clks) {
+		kfree(clk_data);
+		return;
+	}
+
+	for_each_set_bit(i, (unsigned long *)&data->clk_mask,
+			 SUNXI_USB_MAX_SIZE) {
+		of_property_read_string_index(node, "clock-output-names",
+					      j, &clk_name);
+		clk_data->clks[i] = clk_register_gate(NULL, clk_name,
+						      clk_parent, 0,
+						      reg, i, 0, lock);
+		WARN_ON(IS_ERR(clk_data->clks[i]));
+
+		j++;
+	}
+
+	/* Adjust to the real max */
+	clk_data->clk_num = i;
+
+	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	/* Register a reset controller for usb with reset bits */
+	if (data->reset_mask == 0)
+		return;
+
+	reset_data = kzalloc_obj(*reset_data);
+	if (!reset_data)
+		return;
+
+	if (data->reset_needs_clk) {
+		reset_data->clk = of_clk_get(node, 0);
+		if (IS_ERR(reset_data->clk)) {
+			pr_err("Could not get clock for reset controls\n");
+			kfree(reset_data);
+			return;
+		}
+	}
+
+	reset_data->reg = reg;
+	reset_data->lock = lock;
+	reset_data->rcdev.nr_resets = __fls(data->reset_mask) + 1;
+	reset_data->rcdev.ops = &sunxi_usb_reset_ops;
+	reset_data->rcdev.of_node = node;
+	reset_controller_register(&reset_data->rcdev);
+}
+
+static const struct usb_clk_data sun4i_a10_usb_clk_data __initconst = {
+	.clk_mask = BIT(8) | BIT(7) | BIT(6),
+	.reset_mask = BIT(2) | BIT(1) | BIT(0),
+};
+
+static DEFINE_SPINLOCK(sun4i_a10_usb_lock);
+
+static void __init sun4i_a10_usb_setup(struct device_node *node)
+{
+	sunxi_usb_clk_setup(node, &sun4i_a10_usb_clk_data, &sun4i_a10_usb_lock);
+}
+CLK_OF_DECLARE(sun4i_a10_usb, "allwinner,sun4i-a10-usb-clk", sun4i_a10_usb_setup);
+
+static const struct usb_clk_data sun5i_a13_usb_clk_data __initconst = {
+	.clk_mask = BIT(8) | BIT(6),
+	.reset_mask = BIT(1) | BIT(0),
+};
+
+static void __init sun5i_a13_usb_setup(struct device_node *node)
+{
+	sunxi_usb_clk_setup(node, &sun5i_a13_usb_clk_data, &sun4i_a10_usb_lock);
+}
+CLK_OF_DECLARE(sun5i_a13_usb, "allwinner,sun5i-a13-usb-clk", sun5i_a13_usb_setup);
+
+static const struct usb_clk_data sun6i_a31_usb_clk_data __initconst = {
+	.clk_mask = BIT(18) | BIT(17) | BIT(16) | BIT(10) | BIT(9) | BIT(8),
+	.reset_mask = BIT(2) | BIT(1) | BIT(0),
+};
+
+static void __init sun6i_a31_usb_setup(struct device_node *node)
+{
+	sunxi_usb_clk_setup(node, &sun6i_a31_usb_clk_data, &sun4i_a10_usb_lock);
+}
+CLK_OF_DECLARE(sun6i_a31_usb, "allwinner,sun6i-a31-usb-clk", sun6i_a31_usb_setup);
+
+static const struct usb_clk_data sun8i_a23_usb_clk_data __initconst = {
+	.clk_mask = BIT(16) | BIT(11) | BIT(10) | BIT(9) | BIT(8),
+	.reset_mask = BIT(2) | BIT(1) | BIT(0),
+};
+
+static void __init sun8i_a23_usb_setup(struct device_node *node)
+{
+	sunxi_usb_clk_setup(node, &sun8i_a23_usb_clk_data, &sun4i_a10_usb_lock);
+}
+CLK_OF_DECLARE(sun8i_a23_usb, "allwinner,sun8i-a23-usb-clk", sun8i_a23_usb_setup);
+
+static const struct usb_clk_data sun8i_h3_usb_clk_data __initconst = {
+	.clk_mask =  BIT(19) | BIT(18) | BIT(17) | BIT(16) |
+		     BIT(11) | BIT(10) | BIT(9) | BIT(8),
+	.reset_mask = BIT(3) | BIT(2) | BIT(1) | BIT(0),
+};
+
+static void __init sun8i_h3_usb_setup(struct device_node *node)
+{
+	sunxi_usb_clk_setup(node, &sun8i_h3_usb_clk_data, &sun4i_a10_usb_lock);
+}
+CLK_OF_DECLARE(sun8i_h3_usb, "allwinner,sun8i-h3-usb-clk", sun8i_h3_usb_setup);
+
+static const struct usb_clk_data sun9i_a80_usb_mod_data __initconst = {
+	.clk_mask = BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1),
+	.reset_mask = BIT(19) | BIT(18) | BIT(17),
+	.reset_needs_clk = 1,
+};
+
+static DEFINE_SPINLOCK(a80_usb_mod_lock);
+
+static void __init sun9i_a80_usb_mod_setup(struct device_node *node)
+{
+	sunxi_usb_clk_setup(node, &sun9i_a80_usb_mod_data, &a80_usb_mod_lock);
+}
+CLK_OF_DECLARE(sun9i_a80_usb_mod, "allwinner,sun9i-a80-usb-mod-clk", sun9i_a80_usb_mod_setup);
+
+static const struct usb_clk_data sun9i_a80_usb_phy_data __initconst = {
+	.clk_mask = BIT(10) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1),
+	.reset_mask = BIT(21) | BIT(20) | BIT(19) | BIT(18) | BIT(17),
+	.reset_needs_clk = 1,
+};
+
+static DEFINE_SPINLOCK(a80_usb_phy_lock);
+
+static void __init sun9i_a80_usb_phy_setup(struct device_node *node)
+{
+	sunxi_usb_clk_setup(node, &sun9i_a80_usb_phy_data, &a80_usb_phy_lock);
+}
+CLK_OF_DECLARE(sun9i_a80_usb_phy, "allwinner,sun9i-a80-usb-phy-clk", sun9i_a80_usb_phy_setup);