Resguardo inicial

linux-7.2.3/drivers/clk/uniphier/Kconfig

@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config CLK_UNIPHIER
+	bool "Clock driver for UniPhier SoCs"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF && MFD_SYSCON
+	default ARCH_UNIPHIER
+	help
+	  Support for clock controllers on UniPhier SoCs.
+	  Say Y if you want to control clocks provided by System Control
+	  block, Media I/O block, Peripheral Block.

linux-7.2.3/drivers/clk/uniphier/Makefile

@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y	+= clk-uniphier-core.o
+
+obj-y	+= clk-uniphier-cpugear.o
+obj-y	+= clk-uniphier-fixed-factor.o
+obj-y	+= clk-uniphier-fixed-rate.o
+obj-y	+= clk-uniphier-gate.o
+obj-y	+= clk-uniphier-mux.o
+
+obj-y	+= clk-uniphier-sys.o
+obj-y	+= clk-uniphier-mio.o
+obj-y	+= clk-uniphier-peri.o

linux-7.2.3/drivers/clk/uniphier/clk-uniphier-core.c

@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "clk-uniphier.h"
+
+static struct clk_hw *uniphier_clk_register(struct device *dev,
+					    struct regmap *regmap,
+					const struct uniphier_clk_data *data)
+{
+	switch (data->type) {
+	case UNIPHIER_CLK_TYPE_CPUGEAR:
+		return uniphier_clk_register_cpugear(dev, regmap, data->name,
+						     &data->data.cpugear);
+	case UNIPHIER_CLK_TYPE_FIXED_FACTOR:
+		return uniphier_clk_register_fixed_factor(dev, data->name,
+							  &data->data.factor);
+	case UNIPHIER_CLK_TYPE_FIXED_RATE:
+		return uniphier_clk_register_fixed_rate(dev, data->name,
+							&data->data.rate);
+	case UNIPHIER_CLK_TYPE_GATE:
+		return uniphier_clk_register_gate(dev, regmap, data->name,
+						  &data->data.gate);
+	case UNIPHIER_CLK_TYPE_MUX:
+		return uniphier_clk_register_mux(dev, regmap, data->name,
+						 &data->data.mux);
+	default:
+		dev_err(dev, "unsupported clock type\n");
+		return ERR_PTR(-EINVAL);
+	}
+}
+
+static int uniphier_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk_hw_onecell_data *hw_data;
+	const struct uniphier_clk_data *p, *data;
+	struct regmap *regmap;
+	struct device_node *parent;
+	int clk_num = 0;
+
+	data = of_device_get_match_data(dev);
+	if (WARN_ON(!data))
+		return -EINVAL;
+
+	parent = of_get_parent(dev->of_node); /* parent should be syscon node */
+	regmap = syscon_node_to_regmap(parent);
+	of_node_put(parent);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "failed to get regmap (error %ld)\n",
+			PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	for (p = data; p->name; p++)
+		clk_num = max(clk_num, p->idx + 1);
+
+	hw_data = devm_kzalloc(dev, struct_size(hw_data, hws, clk_num),
+			GFP_KERNEL);
+	if (!hw_data)
+		return -ENOMEM;
+
+	hw_data->num = clk_num;
+
+	/* avoid returning NULL for unused idx */
+	while (--clk_num >= 0)
+		hw_data->hws[clk_num] = ERR_PTR(-EINVAL);
+
+	for (p = data; p->name; p++) {
+		struct clk_hw *hw;
+
+		dev_dbg(dev, "register %s (index=%d)\n", p->name, p->idx);
+		hw = uniphier_clk_register(dev, regmap, p);
+		if (WARN(IS_ERR(hw), "failed to register %s", p->name))
+			continue;
+
+		if (p->idx >= 0)
+			hw_data->hws[p->idx] = hw;
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   hw_data);
+}
+
+static const struct of_device_id uniphier_clk_match[] = {
+	/* System clock */
+	{
+		.compatible = "socionext,uniphier-ld4-clock",
+		.data = uniphier_ld4_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro4-clock",
+		.data = uniphier_pro4_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-sld8-clock",
+		.data = uniphier_sld8_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro5-clock",
+		.data = uniphier_pro5_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-clock",
+		.data = uniphier_pxs2_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld11-clock",
+		.data = uniphier_ld11_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-clock",
+		.data = uniphier_ld20_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-clock",
+		.data = uniphier_pxs3_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-nx1-clock",
+		.data = uniphier_nx1_sys_clk_data,
+	},
+	/* Media I/O clock, SD clock */
+	{
+		.compatible = "socionext,uniphier-ld4-mio-clock",
+		.data = uniphier_ld4_mio_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro4-mio-clock",
+		.data = uniphier_ld4_mio_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-sld8-mio-clock",
+		.data = uniphier_ld4_mio_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro5-sd-clock",
+		.data = uniphier_pro5_sd_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-sd-clock",
+		.data = uniphier_pro5_sd_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld11-mio-clock",
+		.data = uniphier_ld4_mio_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-sd-clock",
+		.data = uniphier_pro5_sd_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-sd-clock",
+		.data = uniphier_pro5_sd_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-nx1-sd-clock",
+		.data = uniphier_pro5_sd_clk_data,
+	},
+	/* Peripheral clock */
+	{
+		.compatible = "socionext,uniphier-ld4-peri-clock",
+		.data = uniphier_ld4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro4-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-sld8-peri-clock",
+		.data = uniphier_ld4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro5-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld11-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-nx1-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	/* SoC-glue clock */
+	{
+		.compatible = "socionext,uniphier-pro4-sg-clock",
+		.data = uniphier_pro4_sg_clk_data,
+	},
+	{ /* sentinel */ }
+};
+
+static struct platform_driver uniphier_clk_driver = {
+	.probe = uniphier_clk_probe,
+	.driver = {
+		.name = "uniphier-clk",
+		.of_match_table = uniphier_clk_match,
+	},
+};
+builtin_platform_driver(uniphier_clk_driver);

linux-7.2.3/drivers/clk/uniphier/clk-uniphier-cpugear.c

@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_CLK_CPUGEAR_STAT	0	/* status */
+#define UNIPHIER_CLK_CPUGEAR_SET	4	/* set */
+#define UNIPHIER_CLK_CPUGEAR_UPD	8	/* update */
+#define   UNIPHIER_CLK_CPUGEAR_UPD_BIT	BIT(0)
+
+struct uniphier_clk_cpugear {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	unsigned int regbase;
+	unsigned int mask;
+};
+
+#define to_uniphier_clk_cpugear(_hw) \
+			container_of(_hw, struct uniphier_clk_cpugear, hw)
+
+static int uniphier_clk_cpugear_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct uniphier_clk_cpugear *gear = to_uniphier_clk_cpugear(hw);
+	int ret;
+	unsigned int val;
+
+	ret = regmap_write_bits(gear->regmap,
+				gear->regbase + UNIPHIER_CLK_CPUGEAR_SET,
+				gear->mask, index);
+	if (ret)
+		return ret;
+
+	ret = regmap_write_bits(gear->regmap,
+				gear->regbase + UNIPHIER_CLK_CPUGEAR_UPD,
+				UNIPHIER_CLK_CPUGEAR_UPD_BIT,
+				UNIPHIER_CLK_CPUGEAR_UPD_BIT);
+	if (ret)
+		return ret;
+
+	return regmap_read_poll_timeout(gear->regmap,
+				gear->regbase + UNIPHIER_CLK_CPUGEAR_UPD,
+				val, !(val & UNIPHIER_CLK_CPUGEAR_UPD_BIT),
+				0, 1);
+}
+
+static u8 uniphier_clk_cpugear_get_parent(struct clk_hw *hw)
+{
+	struct uniphier_clk_cpugear *gear = to_uniphier_clk_cpugear(hw);
+	int num_parents = clk_hw_get_num_parents(hw);
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(gear->regmap,
+			  gear->regbase + UNIPHIER_CLK_CPUGEAR_STAT, &val);
+	if (ret)
+		return ret;
+
+	val &= gear->mask;
+
+	return val < num_parents ? val : -EINVAL;
+}
+
+static const struct clk_ops uniphier_clk_cpugear_ops = {
+	.determine_rate = __clk_mux_determine_rate,
+	.set_parent = uniphier_clk_cpugear_set_parent,
+	.get_parent = uniphier_clk_cpugear_get_parent,
+};
+
+struct clk_hw *uniphier_clk_register_cpugear(struct device *dev,
+					 struct regmap *regmap,
+					 const char *name,
+				const struct uniphier_clk_cpugear_data *data)
+{
+	struct uniphier_clk_cpugear *gear;
+	struct clk_init_data init;
+	int ret;
+
+	gear = devm_kzalloc(dev, sizeof(*gear), GFP_KERNEL);
+	if (!gear)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &uniphier_clk_cpugear_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = data->parent_names;
+	init.num_parents = data->num_parents;
+
+	gear->regmap = regmap;
+	gear->regbase = data->regbase;
+	gear->mask = data->mask;
+	gear->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &gear->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &gear->hw;
+}

linux-7.2.3/drivers/clk/uniphier/clk-uniphier-fixed-factor.c

@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+
+#include "clk-uniphier.h"
+
+struct clk_hw *uniphier_clk_register_fixed_factor(struct device *dev,
+						  const char *name,
+			const struct uniphier_clk_fixed_factor_data *data)
+{
+	struct clk_fixed_factor *fix;
+	struct clk_init_data init;
+	int ret;
+
+	fix = devm_kzalloc(dev, sizeof(*fix), GFP_KERNEL);
+	if (!fix)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_fixed_factor_ops;
+	init.flags = data->parent_name ? CLK_SET_RATE_PARENT : 0;
+	init.parent_names = data->parent_name ? &data->parent_name : NULL;
+	init.num_parents = data->parent_name ? 1 : 0;
+
+	fix->mult = data->mult;
+	fix->div = data->div;
+	fix->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &fix->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &fix->hw;
+}

linux-7.2.3/drivers/clk/uniphier/clk-uniphier-fixed-rate.c

@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+
+#include "clk-uniphier.h"
+
+struct clk_hw *uniphier_clk_register_fixed_rate(struct device *dev,
+						const char *name,
+				const struct uniphier_clk_fixed_rate_data *data)
+{
+	struct clk_fixed_rate *fixed;
+	struct clk_init_data init;
+	int ret;
+
+	/* allocate fixed-rate clock */
+	fixed = devm_kzalloc(dev, sizeof(*fixed), GFP_KERNEL);
+	if (!fixed)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_fixed_rate_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+
+	fixed->fixed_rate = data->fixed_rate;
+	fixed->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &fixed->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &fixed->hw;
+}

linux-7.2.3/drivers/clk/uniphier/clk-uniphier-gate.c

@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+#include "clk-uniphier.h"
+
+struct uniphier_clk_gate {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	unsigned int reg;
+	unsigned int bit;
+};
+
+#define to_uniphier_clk_gate(_hw) \
+				container_of(_hw, struct uniphier_clk_gate, hw)
+
+static int uniphier_clk_gate_endisable(struct clk_hw *hw, int enable)
+{
+	struct uniphier_clk_gate *gate = to_uniphier_clk_gate(hw);
+
+	return regmap_write_bits(gate->regmap, gate->reg, BIT(gate->bit),
+				 enable ? BIT(gate->bit) : 0);
+}
+
+static int uniphier_clk_gate_enable(struct clk_hw *hw)
+{
+	return uniphier_clk_gate_endisable(hw, 1);
+}
+
+static void uniphier_clk_gate_disable(struct clk_hw *hw)
+{
+	if (uniphier_clk_gate_endisable(hw, 0) < 0)
+		pr_warn("failed to disable clk\n");
+}
+
+static int uniphier_clk_gate_is_enabled(struct clk_hw *hw)
+{
+	struct uniphier_clk_gate *gate = to_uniphier_clk_gate(hw);
+	unsigned int val;
+
+	if (regmap_read(gate->regmap, gate->reg, &val) < 0)
+		pr_warn("is_enabled() may return wrong result\n");
+
+	return !!(val & BIT(gate->bit));
+}
+
+static const struct clk_ops uniphier_clk_gate_ops = {
+	.enable = uniphier_clk_gate_enable,
+	.disable = uniphier_clk_gate_disable,
+	.is_enabled = uniphier_clk_gate_is_enabled,
+};
+
+struct clk_hw *uniphier_clk_register_gate(struct device *dev,
+					  struct regmap *regmap,
+					  const char *name,
+				const struct uniphier_clk_gate_data *data)
+{
+	struct uniphier_clk_gate *gate;
+	struct clk_init_data init;
+	int ret;
+
+	gate = devm_kzalloc(dev, sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &uniphier_clk_gate_ops;
+	init.flags = data->parent_name ? CLK_SET_RATE_PARENT : 0;
+	init.parent_names = data->parent_name ? &data->parent_name : NULL;
+	init.num_parents = data->parent_name ? 1 : 0;
+
+	gate->regmap = regmap;
+	gate->reg = data->reg;
+	gate->bit = data->bit;
+	gate->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &gate->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &gate->hw;
+}

linux-7.2.3/drivers/clk/uniphier/clk-uniphier-mio.c

@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/stddef.h>
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_MIO_CLK_SD_FIXED					\
+	UNIPHIER_CLK_FACTOR("sd-44m", -1, "sd-133m", 1, 3),		\
+	UNIPHIER_CLK_FACTOR("sd-33m", -1, "sd-200m", 1, 6),		\
+	UNIPHIER_CLK_FACTOR("sd-50m", -1, "sd-200m", 1, 4),		\
+	UNIPHIER_CLK_FACTOR("sd-67m", -1, "sd-200m", 1, 3),		\
+	UNIPHIER_CLK_FACTOR("sd-100m", -1, "sd-200m", 1, 2),		\
+	UNIPHIER_CLK_FACTOR("sd-40m", -1, "sd-200m", 1, 5),		\
+	UNIPHIER_CLK_FACTOR("sd-25m", -1, "sd-200m", 1, 8),		\
+	UNIPHIER_CLK_FACTOR("sd-22m", -1, "sd-133m", 1, 6)
+
+#define UNIPHIER_MIO_CLK_SD(_idx, ch)					\
+	{								\
+		.name = "sd" #ch "-sel",				\
+		.type = UNIPHIER_CLK_TYPE_MUX,				\
+		.idx = -1,						\
+		.data.mux = {						\
+			.parent_names = {				\
+				"sd-44m",				\
+				"sd-33m",				\
+				"sd-50m",				\
+				"sd-67m",				\
+				"sd-100m",				\
+				"sd-40m",				\
+				"sd-25m",				\
+				"sd-22m",				\
+			},						\
+			.num_parents = 8,				\
+			.reg = 0x30 + 0x200 * (ch),			\
+			.masks = {					\
+				0x00031000,				\
+				0x00031000,				\
+				0x00031000,				\
+				0x00031000,				\
+				0x00001300,				\
+				0x00001300,				\
+				0x00001300,				\
+				0x00001300,				\
+			},						\
+			.vals = {					\
+				0x00000000,				\
+				0x00010000,				\
+				0x00020000,				\
+				0x00030000,				\
+				0x00001000,				\
+				0x00001100,				\
+				0x00001200,				\
+				0x00001300,				\
+			},						\
+		},							\
+	},								\
+	UNIPHIER_CLK_GATE("sd" #ch, (_idx), "sd" #ch "-sel", 0x20 + 0x200 * (ch), 8)
+
+#define UNIPHIER_MIO_CLK_USB2(idx, ch)					\
+	UNIPHIER_CLK_GATE("usb2" #ch, (idx), "usb2", 0x20 + 0x200 * (ch), 28)
+
+#define UNIPHIER_MIO_CLK_USB2_PHY(idx, ch)				\
+	UNIPHIER_CLK_GATE("usb2" #ch "-phy", (idx), "usb2", 0x20 + 0x200 * (ch), 29)
+
+const struct uniphier_clk_data uniphier_ld4_mio_clk_data[] = {
+	UNIPHIER_MIO_CLK_SD_FIXED,
+	UNIPHIER_MIO_CLK_SD(0, 0),
+	UNIPHIER_MIO_CLK_SD(1, 1),
+	UNIPHIER_MIO_CLK_SD(2, 2),
+	UNIPHIER_CLK_GATE("miodmac", 7, NULL, 0x20, 25),
+	UNIPHIER_MIO_CLK_USB2(8, 0),
+	UNIPHIER_MIO_CLK_USB2(9, 1),
+	UNIPHIER_MIO_CLK_USB2(10, 2),
+	UNIPHIER_MIO_CLK_USB2_PHY(12, 0),
+	UNIPHIER_MIO_CLK_USB2_PHY(13, 1),
+	UNIPHIER_MIO_CLK_USB2_PHY(14, 2),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro5_sd_clk_data[] = {
+	UNIPHIER_MIO_CLK_SD_FIXED,
+	UNIPHIER_MIO_CLK_SD(0, 0),
+	UNIPHIER_MIO_CLK_SD(1, 1),
+	{ /* sentinel */ }
+};

linux-7.2.3/drivers/clk/uniphier/clk-uniphier-mux.c

@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+#include "clk-uniphier.h"
+
+struct uniphier_clk_mux {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	unsigned int reg;
+	const unsigned int *masks;
+	const unsigned int *vals;
+};
+
+#define to_uniphier_clk_mux(_hw) container_of(_hw, struct uniphier_clk_mux, hw)
+
+static int uniphier_clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct uniphier_clk_mux *mux = to_uniphier_clk_mux(hw);
+
+	return regmap_write_bits(mux->regmap, mux->reg, mux->masks[index],
+				 mux->vals[index]);
+}
+
+static u8 uniphier_clk_mux_get_parent(struct clk_hw *hw)
+{
+	struct uniphier_clk_mux *mux = to_uniphier_clk_mux(hw);
+	unsigned int num_parents = clk_hw_get_num_parents(hw);
+	int ret;
+	unsigned int val;
+	unsigned int i;
+
+	ret = regmap_read(mux->regmap, mux->reg, &val);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < num_parents; i++)
+		if ((mux->masks[i] & val) == mux->vals[i])
+			return i;
+
+	return -EINVAL;
+}
+
+static const struct clk_ops uniphier_clk_mux_ops = {
+	.determine_rate = __clk_mux_determine_rate,
+	.set_parent = uniphier_clk_mux_set_parent,
+	.get_parent = uniphier_clk_mux_get_parent,
+};
+
+struct clk_hw *uniphier_clk_register_mux(struct device *dev,
+					 struct regmap *regmap,
+					 const char *name,
+				const struct uniphier_clk_mux_data *data)
+{
+	struct uniphier_clk_mux *mux;
+	struct clk_init_data init;
+	int ret;
+
+	mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &uniphier_clk_mux_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = data->parent_names;
+	init.num_parents = data->num_parents;
+
+	mux->regmap = regmap;
+	mux->reg = data->reg;
+	mux->masks = data->masks;
+	mux->vals = data->vals;
+	mux->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &mux->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &mux->hw;
+}

linux-7.2.3/drivers/clk/uniphier/clk-uniphier-peri.c

@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_PERI_CLK_UART(idx, ch)					\
+	UNIPHIER_CLK_GATE("uart" #ch, (idx), "uart", 0x24, 19 + (ch))
+
+#define UNIPHIER_PERI_CLK_I2C_COMMON					\
+	UNIPHIER_CLK_GATE("i2c-common", -1, "i2c", 0x20, 1)
+
+#define UNIPHIER_PERI_CLK_I2C(idx, ch)					\
+	UNIPHIER_CLK_GATE("i2c" #ch, (idx), "i2c-common", 0x24, 5 + (ch))
+
+#define UNIPHIER_PERI_CLK_FI2C(idx, ch)					\
+	UNIPHIER_CLK_GATE("i2c" #ch, (idx), "i2c", 0x24, 24 + (ch))
+
+#define UNIPHIER_PERI_CLK_SCSSI(idx, ch)				\
+	UNIPHIER_CLK_GATE("scssi" #ch, (idx), "spi", 0x20, 17 + (ch))
+
+#define UNIPHIER_PERI_CLK_MCSSI(idx)					\
+	UNIPHIER_CLK_GATE("mcssi", (idx), "spi", 0x24, 14)
+
+const struct uniphier_clk_data uniphier_ld4_peri_clk_data[] = {
+	UNIPHIER_PERI_CLK_UART(0, 0),
+	UNIPHIER_PERI_CLK_UART(1, 1),
+	UNIPHIER_PERI_CLK_UART(2, 2),
+	UNIPHIER_PERI_CLK_UART(3, 3),
+	UNIPHIER_PERI_CLK_I2C_COMMON,
+	UNIPHIER_PERI_CLK_I2C(4, 0),
+	UNIPHIER_PERI_CLK_I2C(5, 1),
+	UNIPHIER_PERI_CLK_I2C(6, 2),
+	UNIPHIER_PERI_CLK_I2C(7, 3),
+	UNIPHIER_PERI_CLK_I2C(8, 4),
+	UNIPHIER_PERI_CLK_SCSSI(11, 0),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro4_peri_clk_data[] = {
+	UNIPHIER_PERI_CLK_UART(0, 0),
+	UNIPHIER_PERI_CLK_UART(1, 1),
+	UNIPHIER_PERI_CLK_UART(2, 2),
+	UNIPHIER_PERI_CLK_UART(3, 3),
+	UNIPHIER_PERI_CLK_FI2C(4, 0),
+	UNIPHIER_PERI_CLK_FI2C(5, 1),
+	UNIPHIER_PERI_CLK_FI2C(6, 2),
+	UNIPHIER_PERI_CLK_FI2C(7, 3),
+	UNIPHIER_PERI_CLK_FI2C(8, 4),
+	UNIPHIER_PERI_CLK_FI2C(9, 5),
+	UNIPHIER_PERI_CLK_FI2C(10, 6),
+	UNIPHIER_PERI_CLK_SCSSI(11, 0),
+	UNIPHIER_PERI_CLK_SCSSI(12, 1),
+	UNIPHIER_PERI_CLK_SCSSI(13, 2),
+	UNIPHIER_PERI_CLK_SCSSI(14, 3),
+	UNIPHIER_PERI_CLK_MCSSI(15),
+	{ /* sentinel */ }
+};

linux-7.2.3/drivers/clk/uniphier/clk-uniphier-sys.c

@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/stddef.h>
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_LD4_SYS_CLK_SD					\
+	UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 8),		\
+	UNIPHIER_CLK_FACTOR("sd-133m", -1, "vpll27a", 1, 2)
+
+#define UNIPHIER_PRO5_SYS_CLK_SD					\
+	UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 12),		\
+	UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 18)
+
+#define UNIPHIER_LD20_SYS_CLK_SD					\
+	UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 10),		\
+	UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 15)
+
+#define UNIPHIER_NX1_SYS_CLK_SD						\
+	UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 4),		\
+	UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 6)
+
+#define UNIPHIER_LD4_SYS_CLK_NAND(idx)					\
+	UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 32),		\
+	UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x2104, 2)
+
+#define UNIPHIER_PRO5_SYS_CLK_NAND(idx)					\
+	UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 48),		\
+	UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x2104, 2)
+
+#define UNIPHIER_LD11_SYS_CLK_NAND(idx)					\
+	UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 40),		\
+	UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x210c, 0)
+
+#define UNIPHIER_SYS_CLK_NAND_4X(idx)					\
+	UNIPHIER_CLK_FACTOR("nand-4x", (idx), "nand", 4, 1)
+
+#define UNIPHIER_LD11_SYS_CLK_EMMC(idx)					\
+	UNIPHIER_CLK_GATE("emmc", (idx), NULL, 0x210c, 2)
+
+#define UNIPHIER_LD4_SYS_CLK_STDMAC(idx)				\
+	UNIPHIER_CLK_GATE("stdmac", (idx), NULL, 0x2104, 10)
+
+#define UNIPHIER_LD11_SYS_CLK_STDMAC(idx)				\
+	UNIPHIER_CLK_GATE("stdmac", (idx), NULL, 0x210c, 8)
+
+#define UNIPHIER_LD11_SYS_CLK_HSC(idx)					\
+	UNIPHIER_CLK_GATE("hsc", (idx), NULL, 0x210c, 9)
+
+#define UNIPHIER_PRO4_SYS_CLK_GIO(idx)					\
+	UNIPHIER_CLK_GATE("gio", (idx), NULL, 0x2104, 6)
+
+#define UNIPHIER_PRO4_SYS_CLK_USB3(idx, ch)				\
+	UNIPHIER_CLK_GATE("usb3" #ch, (idx), NULL, 0x2104, 16 + (ch))
+
+#define UNIPHIER_PRO4_SYS_CLK_AIO(idx)					\
+	UNIPHIER_CLK_FACTOR("aio-io200m", -1, "spll", 1, 8),		\
+	UNIPHIER_CLK_GATE("aio", (idx), "aio-io200m", 0x2104, 13)
+
+#define UNIPHIER_PRO5_SYS_CLK_AIO(idx)					\
+	UNIPHIER_CLK_FACTOR("aio-io200m", -1, "spll", 1, 12),		\
+	UNIPHIER_CLK_GATE("aio", (idx), "aio-io200m", 0x2104, 13)
+
+#define UNIPHIER_LD11_SYS_CLK_AIO(idx)					\
+	UNIPHIER_CLK_FACTOR("aio-io200m", -1, "spll", 1, 10),		\
+	UNIPHIER_CLK_GATE("aio", (idx), "aio-io200m", 0x2108, 0)
+
+#define UNIPHIER_LD11_SYS_CLK_EVEA(idx)					\
+	UNIPHIER_CLK_FACTOR("evea-io100m", -1, "spll", 1, 20),		\
+	UNIPHIER_CLK_GATE("evea", (idx), "evea-io100m", 0x2108, 1)
+
+#define UNIPHIER_LD11_SYS_CLK_EXIV(idx)					\
+	UNIPHIER_CLK_FACTOR("exiv-io200m", -1, "spll", 1, 10),		\
+	UNIPHIER_CLK_GATE("exiv", (idx), "exiv-io200m", 0x2110, 2)
+
+#define UNIPHIER_PRO4_SYS_CLK_ETHER(idx)				\
+	UNIPHIER_CLK_GATE("ether", (idx), NULL, 0x2104, 12)
+
+#define UNIPHIER_LD11_SYS_CLK_ETHER(idx)				\
+	UNIPHIER_CLK_GATE("ether", (idx), NULL, 0x210c, 6)
+
+const struct uniphier_clk_data uniphier_ld4_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 65, 1),		/* 1597.44 MHz */
+	UNIPHIER_CLK_FACTOR("upll", -1, "ref", 6000, 512),	/* 288 MHz */
+	UNIPHIER_CLK_FACTOR("a2pll", -1, "ref", 24, 1),		/* 589.824 MHz */
+	UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 5625, 512),	/* 270 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 16),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
+	UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 32),
+	UNIPHIER_LD4_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_LD4_SYS_CLK_SD,
+	UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),			/* Ether, HSC, MIO */
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro4_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 64, 1),		/* 1600 MHz */
+	UNIPHIER_CLK_FACTOR("upll", -1, "ref", 288, 25),	/* 288 MHz */
+	UNIPHIER_CLK_FACTOR("a2pll", -1, "upll", 256, 125),	/* 589.824 MHz */
+	UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25),	/* 270 MHz */
+	UNIPHIER_CLK_FACTOR("gpll", -1, "ref", 10, 1),		/* 250 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 8),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 32),
+	UNIPHIER_CLK_FACTOR("spi", 1, "spll", 1, 32),
+	UNIPHIER_LD4_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_LD4_SYS_CLK_SD,
+	UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
+	UNIPHIER_PRO4_SYS_CLK_ETHER(6),
+	UNIPHIER_CLK_GATE("ether-gb", 7, "gpll", 0x2104, 5),
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),			/* HSC, MIO, RLE */
+	UNIPHIER_CLK_GATE("ether-phy", 10, "ref", 0x2260, 0),
+	UNIPHIER_PRO4_SYS_CLK_GIO(12),			/* Ether, SATA, USB3 */
+	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
+	UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
+	UNIPHIER_CLK_FACTOR("usb30-hsphy0", 16, "upll", 1, 12),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy0", 17, "ref", 1, 1),
+	UNIPHIER_CLK_FACTOR("usb31-ssphy0", 20, "ref", 1, 1),
+	UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x2104, 18),
+	UNIPHIER_CLK_GATE("sata1", 29, NULL, 0x2104, 19),
+	UNIPHIER_PRO4_SYS_CLK_AIO(40),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_sld8_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 64, 1),		/* 1600 MHz */
+	UNIPHIER_CLK_FACTOR("upll", -1, "ref", 288, 25),	/* 288 MHz */
+	UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25),	/* 270 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 20),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
+	UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 32),
+	UNIPHIER_LD4_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_LD4_SYS_CLK_SD,
+	UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),			/* Ether, HSC, MIO */
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro5_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 120, 1),		/* 2400 MHz */
+	UNIPHIER_CLK_FACTOR("dapll1", -1, "ref", 128, 1),	/* 2560 MHz */
+	UNIPHIER_CLK_FACTOR("dapll2", -1, "dapll1", 144, 125),	/* 2949.12 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "dapll2", 1, 40),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
+	UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 48),
+	UNIPHIER_PRO5_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_PRO5_SYS_CLK_SD,
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),				/* HSC */
+	UNIPHIER_PRO4_SYS_CLK_GIO(12),				/* PCIe, USB3 */
+	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
+	UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
+	UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x2108, 2),
+	UNIPHIER_PRO5_SYS_CLK_AIO(40),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 96, 1),		/* 2400 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 27),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
+	UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 48),
+	UNIPHIER_PRO5_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_PRO5_SYS_CLK_SD,
+	UNIPHIER_PRO4_SYS_CLK_ETHER(6),
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),				/* HSC, RLE */
+	/* GIO is always clock-enabled: no function for 0x2104 bit6 */
+	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
+	UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
+	/* The document mentions 0x2104 bit 18, but not functional */
+	UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x2104, 19),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy0", 17, "ref", 1, 1),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy1", 18, "ref", 1, 1),
+	UNIPHIER_CLK_GATE("usb31-hsphy0", 20, NULL, 0x2104, 20),
+	UNIPHIER_CLK_FACTOR("usb31-ssphy0", 21, "ref", 1, 1),
+	UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x2104, 22),
+	UNIPHIER_PRO5_SYS_CLK_AIO(40),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_ld11_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 392, 5),		/* 1960 MHz */
+	UNIPHIER_CLK_FACTOR("mpll", -1, "ref", 64, 1),		/* 1600 MHz */
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1),		/* 2000 MHz */
+	UNIPHIER_CLK_FACTOR("vspll", -1, "ref", 80, 1),		/* 2000 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
+	UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 40),
+	UNIPHIER_LD11_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_LD11_SYS_CLK_EMMC(4),
+	/* Index 5 reserved for eMMC PHY */
+	UNIPHIER_LD11_SYS_CLK_ETHER(6),
+	UNIPHIER_LD11_SYS_CLK_STDMAC(8),			/* HSC, MIO */
+	UNIPHIER_LD11_SYS_CLK_HSC(9),
+	UNIPHIER_CLK_FACTOR("usb2", -1, "ref", 24, 25),
+	UNIPHIER_LD11_SYS_CLK_AIO(40),
+	UNIPHIER_LD11_SYS_CLK_EVEA(41),
+	UNIPHIER_LD11_SYS_CLK_EXIV(42),
+	/* CPU gears */
+	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("mpll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV3("spll", 3, 4, 8),
+	/* Note: both gear1 and gear4 are spll/4.  This is not a bug. */
+	UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
+			     "cpll/2", "spll/4", "cpll/3", "spll/3",
+			     "spll/4", "spll/8", "cpll/4", "cpll/8"),
+	UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
+			     "mpll/2", "spll/4", "mpll/3", "spll/3",
+			     "spll/4", "spll/8", "mpll/4", "mpll/8"),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 88, 1),		/* ARM: 2200 MHz */
+	UNIPHIER_CLK_FACTOR("gppll", -1, "ref", 52, 1),		/* Mali: 1300 MHz */
+	UNIPHIER_CLK_FACTOR("mpll", -1, "ref", 64, 1),		/* Codec: 1600 MHz */
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1),		/* 2000 MHz */
+	UNIPHIER_CLK_FACTOR("s2pll", -1, "ref", 88, 1),		/* IPP: 2200 MHz */
+	UNIPHIER_CLK_FACTOR("vppll", -1, "ref", 504, 5),	/* 2520 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
+	UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 40),
+	UNIPHIER_LD11_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_LD11_SYS_CLK_EMMC(4),
+	/* Index 5 reserved for eMMC PHY */
+	UNIPHIER_LD20_SYS_CLK_SD,
+	UNIPHIER_LD11_SYS_CLK_ETHER(6),
+	UNIPHIER_LD11_SYS_CLK_STDMAC(8),			/* HSC */
+	UNIPHIER_LD11_SYS_CLK_HSC(9),
+	/* GIO is always clock-enabled: no function for 0x210c bit5 */
+	/*
+	 * clock for USB Link is enabled by the logic "OR" of bit 14 and bit 15.
+	 * We do not use bit 15 here.
+	 */
+	UNIPHIER_CLK_GATE("usb30", 14, NULL, 0x210c, 14),
+	UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 12),
+	UNIPHIER_CLK_GATE("usb30-hsphy1", 17, NULL, 0x210c, 13),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy0", 18, "ref", 1, 1),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy1", 19, "ref", 1, 1),
+	UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 4),
+	UNIPHIER_LD11_SYS_CLK_AIO(40),
+	UNIPHIER_LD11_SYS_CLK_EVEA(41),
+	UNIPHIER_LD11_SYS_CLK_EXIV(42),
+	/* CPU gears */
+	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("s2pll", 2, 3, 4, 8),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca72", 32, 0x8000, 0xf, 8,
+			     "cpll/2", "spll/2", "cpll/3", "spll/3",
+			     "spll/4", "spll/8", "cpll/4", "cpll/8"),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
+			     "cpll/2", "spll/2", "cpll/3", "spll/3",
+			     "spll/4", "spll/8", "cpll/4", "cpll/8"),
+	UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
+			     "s2pll/2", "spll/2", "s2pll/3", "spll/3",
+			     "spll/4", "spll/8", "s2pll/4", "s2pll/8"),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 104, 1),		/* ARM: 2600 MHz */
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1),		/* 2000 MHz */
+	UNIPHIER_CLK_FACTOR("s2pll", -1, "ref", 88, 1),		/* IPP: 2400 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
+	UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 40),
+	UNIPHIER_LD20_SYS_CLK_SD,
+	UNIPHIER_LD11_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_LD11_SYS_CLK_EMMC(4),
+	UNIPHIER_CLK_GATE("ether0", 6, NULL, 0x210c, 9),
+	UNIPHIER_CLK_GATE("ether1", 7, NULL, 0x210c, 10),
+	UNIPHIER_CLK_GATE("usb30", 12, NULL, 0x210c, 4),	/* =GIO0 */
+	UNIPHIER_CLK_GATE("usb31-0", 13, NULL, 0x210c, 5),	/* =GIO1 */
+	UNIPHIER_CLK_GATE("usb31-1", 14, NULL, 0x210c, 6),	/* =GIO1-1 */
+	UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 16),
+	UNIPHIER_CLK_GATE("usb30-ssphy0", 17, NULL, 0x210c, 18),
+	UNIPHIER_CLK_GATE("usb30-ssphy1", 18, NULL, 0x210c, 20),
+	UNIPHIER_CLK_GATE("usb31-hsphy0", 20, NULL, 0x210c, 17),
+	UNIPHIER_CLK_GATE("usb31-ssphy0", 21, NULL, 0x210c, 19),
+	UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 3),
+	UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x210c, 7),
+	UNIPHIER_CLK_GATE("sata1", 29, NULL, 0x210c, 8),
+	UNIPHIER_CLK_GATE("sata-phy", 30, NULL, 0x210c, 21),
+	UNIPHIER_LD11_SYS_CLK_AIO(40),
+	UNIPHIER_LD11_SYS_CLK_EXIV(42),
+	/* CPU gears */
+	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("s2pll", 2, 3, 4, 8),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
+			     "cpll/2", "spll/2", "cpll/3", "spll/3",
+			     "spll/4", "spll/8", "cpll/4", "cpll/8"),
+	UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
+			     "s2pll/2", "spll/2", "s2pll/3", "spll/3",
+			     "spll/4", "spll/8", "s2pll/4", "s2pll/8"),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_nx1_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 100, 1),		/* ARM: 2500 MHz */
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 32, 1),		/* 800 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 6),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
+	UNIPHIER_NX1_SYS_CLK_SD,
+	UNIPHIER_CLK_GATE("emmc", 4, NULL, 0x2108, 8),
+	UNIPHIER_CLK_GATE("ether", 6, NULL, 0x210c, 0),
+	UNIPHIER_CLK_GATE("usb30-0", 12, NULL, 0x210c, 16),	/* =GIO */
+	UNIPHIER_CLK_GATE("usb30-1", 13, NULL, 0x210c, 20),	/* =GIO1P */
+	UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 24),
+	UNIPHIER_CLK_GATE("usb30-ssphy0", 17, NULL, 0x210c, 25),
+	UNIPHIER_CLK_GATE("usb30-ssphy1", 18, NULL, 0x210c, 26),
+	UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 8),
+	UNIPHIER_CLK_GATE("voc", 52, NULL, 0x2110, 0),
+	UNIPHIER_CLK_GATE("hdmitx", 58, NULL, 0x2110, 8),
+	/* CPU gears */
+	UNIPHIER_CLK_DIV5("cpll", 2, 4, 8, 16, 32),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 5,
+			     "cpll/2", "cpll/4", "cpll/8", "cpll/16",
+			     "cpll/32"),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro4_sg_clk_data[] = {
+	UNIPHIER_CLK_DIV("gpll", 4),
+	{
+		.name = "sata-ref",
+		.type = UNIPHIER_CLK_TYPE_MUX,
+		.idx = 0,
+		.data.mux = {
+			.parent_names = { "gpll/4", "ref", },
+			.num_parents = 2,
+			.reg = 0x1a28,
+			.masks = { 0x1, 0x1, },
+			.vals  = { 0x0, 0x1, },
+		},
+	},
+	{ /* sentinel */ }
+};

linux-7.2.3/drivers/clk/uniphier/clk-uniphier.h

@@ -0,0 +1,160 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#ifndef __CLK_UNIPHIER_H__
+#define __CLK_UNIPHIER_H__
+
+struct clk_hw;
+struct device;
+struct regmap;
+
+#define UNIPHIER_CLK_CPUGEAR_MAX_PARENTS	16
+#define UNIPHIER_CLK_MUX_MAX_PARENTS		8
+
+enum uniphier_clk_type {
+	UNIPHIER_CLK_TYPE_CPUGEAR,
+	UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+	UNIPHIER_CLK_TYPE_FIXED_RATE,
+	UNIPHIER_CLK_TYPE_GATE,
+	UNIPHIER_CLK_TYPE_MUX,
+};
+
+struct uniphier_clk_cpugear_data {
+	const char *parent_names[UNIPHIER_CLK_CPUGEAR_MAX_PARENTS];
+	unsigned int num_parents;
+	unsigned int regbase;
+	unsigned int mask;
+};
+
+struct uniphier_clk_fixed_factor_data {
+	const char *parent_name;
+	unsigned int mult;
+	unsigned int div;
+};
+
+struct uniphier_clk_fixed_rate_data {
+	unsigned long fixed_rate;
+};
+
+struct uniphier_clk_gate_data {
+	const char *parent_name;
+	unsigned int reg;
+	unsigned int bit;
+};
+
+struct uniphier_clk_mux_data {
+	const char *parent_names[UNIPHIER_CLK_MUX_MAX_PARENTS];
+	unsigned int num_parents;
+	unsigned int reg;
+	unsigned int masks[UNIPHIER_CLK_MUX_MAX_PARENTS];
+	unsigned int vals[UNIPHIER_CLK_MUX_MAX_PARENTS];
+};
+
+struct uniphier_clk_data {
+	const char *name;
+	enum uniphier_clk_type type;
+	int idx;
+	union {
+		struct uniphier_clk_cpugear_data cpugear;
+		struct uniphier_clk_fixed_factor_data factor;
+		struct uniphier_clk_fixed_rate_data rate;
+		struct uniphier_clk_gate_data gate;
+		struct uniphier_clk_mux_data mux;
+	} data;
+};
+
+#define UNIPHIER_CLK_CPUGEAR(_name, _idx, _regbase, _mask,	\
+			     _num_parents, ...)			\
+	{							\
+		.name = (_name),				\
+		.type = UNIPHIER_CLK_TYPE_CPUGEAR,		\
+		.idx = (_idx),					\
+		.data.cpugear = {				\
+			.parent_names = { __VA_ARGS__ },	\
+			.num_parents = (_num_parents),		\
+			.regbase = (_regbase),			\
+			.mask = (_mask)				\
+		 },						\
+	}
+
+#define UNIPHIER_CLK_FACTOR(_name, _idx, _parent, _mult, _div)	\
+	{							\
+		.name = (_name),				\
+		.type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,		\
+		.idx = (_idx),					\
+		.data.factor = {				\
+			.parent_name = (_parent),		\
+			.mult = (_mult),			\
+			.div = (_div),				\
+		},						\
+	}
+
+#define UNIPHIER_CLK_GATE(_name, _idx, _parent, _reg, _bit)	\
+	{							\
+		.name = (_name),				\
+		.type = UNIPHIER_CLK_TYPE_GATE,			\
+		.idx = (_idx),					\
+		.data.gate = {					\
+			.parent_name = (_parent),		\
+			.reg = (_reg),				\
+			.bit = (_bit),				\
+		},						\
+	}
+
+#define UNIPHIER_CLK_DIV(parent, div)				\
+	UNIPHIER_CLK_FACTOR(parent "/" #div, -1, parent, 1, div)
+
+#define UNIPHIER_CLK_DIV2(parent, div0, div1)			\
+	UNIPHIER_CLK_DIV(parent, div0),				\
+	UNIPHIER_CLK_DIV(parent, div1)
+
+#define UNIPHIER_CLK_DIV3(parent, div0, div1, div2)		\
+	UNIPHIER_CLK_DIV2(parent, div0, div1),			\
+	UNIPHIER_CLK_DIV(parent, div2)
+
+#define UNIPHIER_CLK_DIV4(parent, div0, div1, div2, div3)	\
+	UNIPHIER_CLK_DIV2(parent, div0, div1),			\
+	UNIPHIER_CLK_DIV2(parent, div2, div3)
+
+#define UNIPHIER_CLK_DIV5(parent, div0, div1, div2, div3, div4)	\
+	UNIPHIER_CLK_DIV4(parent, div0, div1, div2, div3),	\
+	UNIPHIER_CLK_DIV(parent, div4)
+
+struct clk_hw *uniphier_clk_register_cpugear(struct device *dev,
+					     struct regmap *regmap,
+					     const char *name,
+				const struct uniphier_clk_cpugear_data *data);
+struct clk_hw *uniphier_clk_register_fixed_factor(struct device *dev,
+						  const char *name,
+			const struct uniphier_clk_fixed_factor_data *data);
+struct clk_hw *uniphier_clk_register_fixed_rate(struct device *dev,
+						const char *name,
+			const struct uniphier_clk_fixed_rate_data *data);
+struct clk_hw *uniphier_clk_register_gate(struct device *dev,
+					  struct regmap *regmap,
+					  const char *name,
+				const struct uniphier_clk_gate_data *data);
+struct clk_hw *uniphier_clk_register_mux(struct device *dev,
+					 struct regmap *regmap,
+					 const char *name,
+				const struct uniphier_clk_mux_data *data);
+
+extern const struct uniphier_clk_data uniphier_ld4_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro4_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_sld8_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro5_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld11_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld20_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_nx1_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld4_mio_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro5_sd_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld4_peri_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro4_peri_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro4_sg_clk_data[];
+
+#endif /* __CLK_UNIPHIER_H__ */