Resguardo inicial

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/Kconfig

@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+config DRM_RCAR_DU
+	tristate "DRM Support for R-Car Display Unit"
+	depends on DRM && OF
+	depends on ARM || ARM64 || COMPILE_TEST
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select DRM_CLIENT_SELECTION
+	select DRM_KMS_HELPER
+	select DRM_DISPLAY_HELPER
+	select DRM_BRIDGE_CONNECTOR
+	select DRM_GEM_DMA_HELPER
+	select VIDEOMODE_HELPERS
+	help
+	  Choose this option if you have an R-Car chipset.
+	  If M is selected the module will be called rcar-du-drm.
+
+config DRM_RCAR_USE_CMM
+	bool "R-Car DU Color Management Module (CMM) Support"
+	depends on DRM_RCAR_DU
+	default DRM_RCAR_DU
+	help
+	  Enable support for R-Car Color Management Module (CMM).
+
+config DRM_RCAR_CMM
+	def_tristate DRM_RCAR_DU
+	depends on DRM_RCAR_USE_CMM
+
+config DRM_RCAR_DW_HDMI
+	tristate "R-Car Gen3 and RZ/G2 DU HDMI Encoder Support"
+	depends on DRM && OF
+	depends on DRM_RCAR_DU || COMPILE_TEST
+	select DRM_DW_HDMI
+	help
+	  Enable support for R-Car Gen3 or RZ/G2 internal HDMI encoder.
+
+config DRM_RCAR_USE_LVDS
+	bool "R-Car DU LVDS Encoder Support"
+	depends on DRM_BRIDGE && OF
+	depends on DRM_RCAR_DU || COMPILE_TEST
+	default DRM_RCAR_DU
+	help
+	  Enable support for the R-Car Display Unit embedded LVDS encoders.
+
+config DRM_RCAR_LVDS
+	def_tristate DRM_RCAR_DU
+	depends on DRM_RCAR_USE_LVDS
+	depends on PM
+	select DRM_KMS_HELPER
+	select DRM_PANEL
+	select RESET_CONTROLLER
+
+config DRM_RCAR_USE_MIPI_DSI
+	bool "R-Car DU MIPI DSI Encoder Support"
+	depends on DRM_BRIDGE && OF
+	depends on DRM_RCAR_DU || COMPILE_TEST
+	default DRM_RCAR_DU
+	help
+	  Enable support for the R-Car Display Unit embedded MIPI DSI encoders.
+
+config DRM_RCAR_MIPI_DSI
+	def_tristate DRM_RCAR_DU
+	depends on DRM_RCAR_USE_MIPI_DSI
+	select DRM_MIPI_DSI
+	select RESET_CONTROLLER
+
+config DRM_RCAR_VSP
+	bool "R-Car DU VSP Compositor Support" if ARM
+	default y if ARM64
+	depends on DRM_RCAR_DU
+	depends on VIDEO_RENESAS_VSP1=y || (VIDEO_RENESAS_VSP1 && DRM_RCAR_DU=m)
+	help
+	  Enable support to expose the R-Car VSP Compositor as KMS planes.
+
+config DRM_RCAR_WRITEBACK
+	bool
+	default y if ARM64
+	depends on DRM_RCAR_DU

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/Makefile

@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+rcar-du-drm-y := rcar_du_crtc.o \
+		 rcar_du_drv.o \
+		 rcar_du_encoder.o \
+		 rcar_du_group.o \
+		 rcar_du_kms.o \
+		 rcar_du_plane.o \
+
+rcar-du-drm-$(CONFIG_DRM_RCAR_VSP)	+= rcar_du_vsp.o
+rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o
+
+obj-$(CONFIG_DRM_RCAR_CMM)		+= rcar_cmm.o
+obj-$(CONFIG_DRM_RCAR_DU)		+= rcar-du-drm.o
+obj-$(CONFIG_DRM_RCAR_DW_HDMI)		+= rcar_dw_hdmi.o
+obj-$(CONFIG_DRM_RCAR_LVDS)		+= rcar_lvds.o
+obj-$(CONFIG_DRM_RCAR_MIPI_DSI)		+= rcar_mipi_dsi.o

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_cmm.c

@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * R-Car Display Unit Color Management Module
+ *
+ * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include <drm/drm_color_mgmt.h>
+
+#include "rcar_cmm.h"
+
+#define CM2_LUT_CTRL		0x0000
+#define CM2_LUT_CTRL_LUT_EN	BIT(0)
+#define CM2_LUT_TBL_BASE	0x0600
+#define CM2_LUT_TBL(__i)	(CM2_LUT_TBL_BASE + (__i) * 4)
+
+struct rcar_cmm {
+	void __iomem *base;
+
+	/*
+	 * @lut:		1D-LUT state
+	 * @lut.enabled:	1D-LUT enabled flag
+	 */
+	struct {
+		bool enabled;
+	} lut;
+};
+
+static inline void rcar_cmm_write(struct rcar_cmm *rcmm, u32 reg, u32 data)
+{
+	iowrite32(data, rcmm->base + reg);
+}
+
+/*
+ * rcar_cmm_lut_write() - Scale the DRM LUT table entries to hardware precision
+ *			  and write to the CMM registers
+ * @rcmm: Pointer to the CMM device
+ * @drm_lut: Pointer to the DRM LUT table
+ */
+static void rcar_cmm_lut_write(struct rcar_cmm *rcmm,
+			       const struct drm_color_lut *drm_lut)
+{
+	unsigned int i;
+
+	for (i = 0; i < CM2_LUT_SIZE; ++i) {
+		u32 entry = drm_color_lut_extract(drm_lut[i].red, 8) << 16
+			  | drm_color_lut_extract(drm_lut[i].green, 8) << 8
+			  | drm_color_lut_extract(drm_lut[i].blue, 8);
+
+		rcar_cmm_write(rcmm, CM2_LUT_TBL(i), entry);
+	}
+}
+
+/*
+ * rcar_cmm_setup() - Configure the CMM unit
+ * @dev: The device associated with the CMM instance
+ * @config: The CMM unit configuration
+ *
+ * Configure the CMM unit with the given configuration. Currently enabling,
+ * disabling and programming of the 1-D LUT unit is supported.
+ *
+ * As rcar_cmm_setup() accesses the CMM registers the unit should be powered
+ * and its functional clock enabled. To guarantee this, before any call to
+ * this function is made, the CMM unit has to be enabled by calling
+ * rcar_cmm_enable() first.
+ *
+ * TODO: Add support for LUT double buffer operations to avoid updating the
+ * LUT table entries while a frame is being displayed.
+ */
+int rcar_cmm_setup(struct device *dev,
+		   const struct rcar_cmm_config *config)
+{
+	struct rcar_cmm *rcmm = dev_get_drvdata(dev);
+
+	/* Disable LUT if no table is provided. */
+	if (!config->lut.table) {
+		if (rcmm->lut.enabled) {
+			rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0);
+			rcmm->lut.enabled = false;
+		}
+
+		return 0;
+	}
+
+	/* Enable LUT and program the new gamma table values. */
+	if (!rcmm->lut.enabled) {
+		rcar_cmm_write(rcmm, CM2_LUT_CTRL, CM2_LUT_CTRL_LUT_EN);
+		rcmm->lut.enabled = true;
+	}
+
+	rcar_cmm_lut_write(rcmm, config->lut.table);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rcar_cmm_setup);
+
+/*
+ * rcar_cmm_enable() - Enable the CMM unit
+ * @dev: The device associated with the CMM instance
+ *
+ * When the output of the corresponding DU channel is routed to the CMM unit,
+ * the unit shall be enabled before the DU channel is started, and remain
+ * enabled until the channel is stopped. The CMM unit shall be disabled with
+ * rcar_cmm_disable().
+ *
+ * Calls to rcar_cmm_enable() and rcar_cmm_disable() are not reference-counted.
+ * It is an error to attempt to enable an already enabled CMM unit, or to
+ * attempt to disable a disabled unit.
+ */
+int rcar_cmm_enable(struct device *dev)
+{
+	int ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rcar_cmm_enable);
+
+/*
+ * rcar_cmm_disable() - Disable the CMM unit
+ * @dev: The device associated with the CMM instance
+ *
+ * See rcar_cmm_enable() for usage information.
+ *
+ * Disabling the CMM unit disable all the internal processing blocks. The CMM
+ * state shall thus be restored with rcar_cmm_setup() when re-enabling the CMM
+ * unit after the next rcar_cmm_enable() call.
+ */
+void rcar_cmm_disable(struct device *dev)
+{
+	struct rcar_cmm *rcmm = dev_get_drvdata(dev);
+
+	rcar_cmm_write(rcmm, CM2_LUT_CTRL, 0);
+	rcmm->lut.enabled = false;
+
+	pm_runtime_put(dev);
+}
+EXPORT_SYMBOL_GPL(rcar_cmm_disable);
+
+/*
+ * rcar_cmm_init() - Initialize the CMM unit
+ * @dev: The device associated with the CMM instance
+ *
+ * Return: 0 on success, -EPROBE_DEFER if the CMM is not available yet,
+ *         -ENODEV if the DRM_RCAR_CMM config option is disabled
+ */
+int rcar_cmm_init(struct device *dev)
+{
+	struct rcar_cmm *rcmm = dev_get_drvdata(dev);
+
+	if (!rcmm)
+		return -EPROBE_DEFER;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rcar_cmm_init);
+
+static int rcar_cmm_probe(struct platform_device *pdev)
+{
+	struct rcar_cmm *rcmm;
+
+	rcmm = devm_kzalloc(&pdev->dev, sizeof(*rcmm), GFP_KERNEL);
+	if (!rcmm)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, rcmm);
+
+	rcmm->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(rcmm->base))
+		return PTR_ERR(rcmm->base);
+
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+}
+
+static void rcar_cmm_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+}
+
+static const struct of_device_id rcar_cmm_of_table[] = {
+	{ .compatible = "renesas,rcar-gen3-cmm", },
+	{ .compatible = "renesas,rcar-gen2-cmm", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rcar_cmm_of_table);
+
+static struct platform_driver rcar_cmm_platform_driver = {
+	.probe		= rcar_cmm_probe,
+	.remove		= rcar_cmm_remove,
+	.driver		= {
+		.name	= "rcar-cmm",
+		.of_match_table = rcar_cmm_of_table,
+	},
+};
+
+module_platform_driver(rcar_cmm_platform_driver);
+
+MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@jmondi.org>");
+MODULE_DESCRIPTION("Renesas R-Car CMM Driver");
+MODULE_LICENSE("GPL v2");

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_cmm.h

@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * R-Car Display Unit Color Management Module
+ *
+ * Copyright (C) 2019 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+#ifndef __RCAR_CMM_H__
+#define __RCAR_CMM_H__
+
+#define CM2_LUT_SIZE		256
+
+struct device;
+struct drm_color_lut;
+
+/**
+ * struct rcar_cmm_config - CMM configuration
+ *
+ * @lut:	1D-LUT configuration
+ * @lut.table:	1D-LUT table entries. Disable LUT operations when NULL
+ */
+struct rcar_cmm_config {
+	struct {
+		struct drm_color_lut *table;
+	} lut;
+};
+
+#if IS_ENABLED(CONFIG_DRM_RCAR_CMM)
+int rcar_cmm_init(struct device *dev);
+
+int rcar_cmm_enable(struct device *dev);
+void rcar_cmm_disable(struct device *dev);
+
+int rcar_cmm_setup(struct device *dev,
+		   const struct rcar_cmm_config *config);
+#else
+static inline int rcar_cmm_init(struct device *dev)
+{
+	return -ENODEV;
+}
+
+static inline int rcar_cmm_enable(struct device *dev)
+{
+	return 0;
+}
+
+static inline void rcar_cmm_disable(struct device *dev)
+{
+}
+
+static inline int rcar_cmm_setup(struct device *dev,
+				 const struct rcar_cmm_config *config)
+{
+	return 0;
+}
+#endif /* IS_ENABLED(CONFIG_DRM_RCAR_CMM) */
+
+#endif /* __RCAR_CMM_H__ */

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_crtc.h

@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * R-Car Display Unit CRTCs
+ *
+ * Copyright (C) 2013-2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#ifndef __RCAR_DU_CRTC_H__
+#define __RCAR_DU_CRTC_H__
+
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_writeback.h>
+
+#include <media/vsp1.h>
+
+struct rcar_du_cmm;
+struct rcar_du_group;
+struct rcar_du_vsp;
+
+/**
+ * struct rcar_du_crtc - the CRTC, representing a DU superposition processor
+ * @crtc: base DRM CRTC
+ * @dev: the DU device
+ * @clock: the CRTC functional clock
+ * @extclock: external pixel dot clock (optional)
+ * @mmio_offset: offset of the CRTC registers in the DU MMIO block
+ * @index: CRTC hardware index
+ * @initialized: whether the CRTC has been initialized and clocks enabled
+ * @dsysr: cached value of the DSYSR register
+ * @vblank_enable: whether vblank events are enabled on this CRTC
+ * @event: event to post when the pending page flip completes
+ * @flip_wait: wait queue used to signal page flip completion
+ * @vblank_lock: protects vblank_wait and vblank_count
+ * @vblank_wait: wait queue used to signal vertical blanking
+ * @vblank_count: number of vertical blanking interrupts to wait for
+ * @group: CRTC group this CRTC belongs to
+ * @cmm: CMM associated with this CRTC
+ * @vsp: VSP feeding video to this CRTC
+ * @vsp_pipe: index of the VSP pipeline feeding video to this CRTC
+ * @writeback: the writeback connector
+ */
+struct rcar_du_crtc {
+	struct drm_crtc crtc;
+
+	struct rcar_du_device *dev;
+	struct clk *clock;
+	struct clk *extclock;
+	unsigned int mmio_offset;
+	unsigned int index;
+	bool initialized;
+
+	u32 dsysr;
+
+	bool vblank_enable;
+	struct drm_pending_vblank_event *event;
+	wait_queue_head_t flip_wait;
+
+	spinlock_t vblank_lock;
+	wait_queue_head_t vblank_wait;
+	unsigned int vblank_count;
+
+	struct rcar_du_group *group;
+	struct rcar_du_cmm *cmm;
+	struct rcar_du_vsp *vsp;
+	unsigned int vsp_pipe;
+
+	const char *const *sources;
+	unsigned int sources_count;
+
+	struct drm_writeback_connector writeback;
+};
+
+#define to_rcar_crtc(c)		container_of(c, struct rcar_du_crtc, crtc)
+#define wb_to_rcar_crtc(c)	container_of(c, struct rcar_du_crtc, writeback)
+
+/**
+ * struct rcar_du_crtc_state - Driver-specific CRTC state
+ * @state: base DRM CRTC state
+ * @crc: CRC computation configuration
+ * @outputs: bitmask of the outputs (enum rcar_du_output) driven by this CRTC
+ */
+struct rcar_du_crtc_state {
+	struct drm_crtc_state state;
+
+	struct vsp1_du_crc_config crc;
+	unsigned int outputs;
+};
+
+#define to_rcar_crtc_state(s) container_of(s, struct rcar_du_crtc_state, state)
+
+int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int swindex,
+			unsigned int hwindex);
+
+void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc);
+
+void rcar_du_crtc_dsysr_clr_set(struct rcar_du_crtc *rcrtc, u32 clr, u32 set);
+
+#endif /* __RCAR_DU_CRTC_H__ */

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c

@@ -0,0 +1,763 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * R-Car Display Unit DRM driver
+ *
+ * Copyright (C) 2013-2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+
+#include <drm/clients/drm_client_setup.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fbdev_dma.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+#include "rcar_du_drv.h"
+#include "rcar_du_kms.h"
+
+/* -----------------------------------------------------------------------------
+ * Device Information
+ */
+
+static const struct rcar_du_device_info rzg1_du_r8a7743_info = {
+	.gen = 2,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A774[34] has one RGB output and one LVDS output
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(1) | BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.port = 1,
+		},
+	},
+	.num_lvds = 1,
+	.num_rpf = 4,
+};
+
+static const struct rcar_du_device_info rzg1_du_r8a7745_info = {
+	.gen = 2,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A7745 has two RGB outputs
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_DPAD1] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+	},
+	.num_rpf = 4,
+};
+
+static const struct rcar_du_device_info rzg1_du_r8a77470_info = {
+	.gen = 2,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A77470 has two RGB outputs, one LVDS output, and
+		 * one (currently unsupported) analog video output
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_DPAD1] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0) | BIT(1),
+			.port = 2,
+		},
+	},
+	.num_rpf = 4,
+};
+
+static const struct rcar_du_device_info rcar_du_r8a774a1_info = {
+	.gen = 3,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_VSP1_SOURCE
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.channels_mask = BIT(2) | BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A774A1 has one RGB output, one LVDS output and one HDMI
+		 * output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(2),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_HDMI0] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.port = 2,
+		},
+	},
+	.num_lvds = 1,
+	.num_rpf = 5,
+	.dpll_mask =  BIT(1),
+};
+
+static const struct rcar_du_device_info rcar_du_r8a774b1_info = {
+	.gen = 3,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_VSP1_SOURCE
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.channels_mask = BIT(3) | BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A774B1 has one RGB output, one LVDS output and one HDMI
+		 * output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(2),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_HDMI0] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.port = 2,
+		},
+	},
+	.num_lvds = 1,
+	.num_rpf = 5,
+	.dpll_mask =  BIT(1),
+};
+
+static const struct rcar_du_device_info rcar_du_r8a774c0_info = {
+	.gen = 3,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_VSP1_SOURCE,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A774C0 has one RGB output and two LVDS outputs
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0) | BIT(1),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.port = 1,
+		},
+		[RCAR_DU_OUTPUT_LVDS1] = {
+			.possible_crtcs = BIT(1),
+			.port = 2,
+		},
+	},
+	.num_lvds = 2,
+	.num_rpf = 4,
+	.lvds_clk_mask =  BIT(1) | BIT(0),
+};
+
+static const struct rcar_du_device_info rcar_du_r8a774e1_info = {
+	.gen = 3,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_VSP1_SOURCE
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.channels_mask = BIT(3) | BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A774E1 has one RGB output, one LVDS output and one HDMI
+		 * output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(2),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_HDMI0] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.port = 2,
+		},
+	},
+	.num_lvds = 1,
+	.num_rpf = 5,
+	.dpll_mask =  BIT(1),
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7779_info = {
+	.gen = 1,
+	.features = RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A7779 has two RGB outputs and one (currently unsupported)
+		 * TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_DPAD1] = {
+			.possible_crtcs = BIT(1) | BIT(0),
+			.port = 1,
+		},
+	},
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7790_info = {
+	.gen = 2,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.quirks = RCAR_DU_QUIRK_ALIGN_128B,
+	.channels_mask = BIT(2) | BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A7742 and R8A7790 each have one RGB output and two LVDS
+		 * outputs. Additionally R8A7790 supports one TCON output
+		 * (currently unsupported by the driver).
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(2) | BIT(1) | BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.port = 1,
+		},
+		[RCAR_DU_OUTPUT_LVDS1] = {
+			.possible_crtcs = BIT(2) | BIT(1),
+			.port = 2,
+		},
+	},
+	.num_lvds = 2,
+	.num_rpf = 4,
+};
+
+/* M2-W (r8a7791) and M2-N (r8a7793) are identical */
+static const struct rcar_du_device_info rcar_du_r8a7791_info = {
+	.gen = 2,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A779[13] has one RGB output, one LVDS output and one
+		 * (currently unsupported) TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(1) | BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.port = 1,
+		},
+	},
+	.num_lvds = 1,
+	.num_rpf = 4,
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7792_info = {
+	.gen = 2,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/* R8A7792 has two RGB outputs. */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_DPAD1] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+	},
+	.num_rpf = 4,
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7794_info = {
+	.gen = 2,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A7794 has two RGB outputs and one (currently unsupported)
+		 * TCON output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_DPAD1] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+	},
+	.num_rpf = 4,
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7795_info = {
+	.gen = 3,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_VSP1_SOURCE
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.channels_mask = BIT(3) | BIT(2) | BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A7795 has one RGB output, two HDMI outputs and one
+		 * LVDS output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(3),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_HDMI0] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+		[RCAR_DU_OUTPUT_HDMI1] = {
+			.possible_crtcs = BIT(2),
+			.port = 2,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.port = 3,
+		},
+	},
+	.num_lvds = 1,
+	.num_rpf = 5,
+	.dpll_mask =  BIT(2) | BIT(1),
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7796_info = {
+	.gen = 3,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_VSP1_SOURCE
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.channels_mask = BIT(2) | BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A7796 has one RGB output, one LVDS output and one HDMI
+		 * output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(2),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_HDMI0] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.port = 2,
+		},
+	},
+	.num_lvds = 1,
+	.num_rpf = 5,
+	.dpll_mask =  BIT(1),
+};
+
+static const struct rcar_du_device_info rcar_du_r8a77965_info = {
+	.gen = 3,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_VSP1_SOURCE
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.channels_mask = BIT(3) | BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A77965 has one RGB output, one LVDS output and one HDMI
+		 * output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(2),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_HDMI0] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.port = 2,
+		},
+	},
+	.num_lvds = 1,
+	.num_rpf = 5,
+	.dpll_mask =  BIT(1),
+};
+
+static const struct rcar_du_device_info rcar_du_r8a77970_info = {
+	.gen = 3,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_VSP1_SOURCE
+		  | RCAR_DU_FEATURE_INTERLACED
+		  | RCAR_DU_FEATURE_TVM_SYNC,
+	.channels_mask = BIT(0),
+	.routes = {
+		/*
+		 * R8A77970 and R8A77980 have one RGB output and one LVDS
+		 * output.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.port = 1,
+		},
+	},
+	.num_lvds = 1,
+	.num_rpf = 5,
+};
+
+static const struct rcar_du_device_info rcar_du_r8a7799x_info = {
+	.gen = 3,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_CRTC_CLOCK
+		  | RCAR_DU_FEATURE_VSP1_SOURCE,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/*
+		 * R8A77990 and R8A77995 have one RGB output and two LVDS
+		 * outputs.
+		 */
+		[RCAR_DU_OUTPUT_DPAD0] = {
+			.possible_crtcs = BIT(0) | BIT(1),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_LVDS0] = {
+			.possible_crtcs = BIT(0),
+			.port = 1,
+		},
+		[RCAR_DU_OUTPUT_LVDS1] = {
+			.possible_crtcs = BIT(1),
+			.port = 2,
+		},
+	},
+	.num_lvds = 2,
+	.num_rpf = 5,
+	.lvds_clk_mask =  BIT(1) | BIT(0),
+};
+
+static const struct rcar_du_device_info rcar_du_r8a779a0_info = {
+	.gen = 4,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_VSP1_SOURCE
+		  | RCAR_DU_FEATURE_NO_BLENDING,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/* R8A779A0 has two MIPI DSI outputs. */
+		[RCAR_DU_OUTPUT_DSI0] = {
+			.possible_crtcs = BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_DSI1] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+	},
+	.num_rpf = 5,
+	.dsi_clk_mask =  BIT(1) | BIT(0),
+};
+
+static const struct rcar_du_device_info rcar_du_r8a779g0_info = {
+	.gen = 4,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_VSP1_SOURCE
+		  | RCAR_DU_FEATURE_NO_BLENDING,
+	.channels_mask = BIT(1) | BIT(0),
+	.routes = {
+		/* R8A779G0 has two MIPI DSI outputs. */
+		[RCAR_DU_OUTPUT_DSI0] = {
+			.possible_crtcs = BIT(0),
+			.port = 0,
+		},
+		[RCAR_DU_OUTPUT_DSI1] = {
+			.possible_crtcs = BIT(1),
+			.port = 1,
+		},
+	},
+	.num_rpf = 5,
+	.dsi_clk_mask =  BIT(1) | BIT(0),
+};
+
+static const struct rcar_du_device_info rcar_du_r8a779h0_info = {
+	.gen = 4,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_VSP1_SOURCE
+		  | RCAR_DU_FEATURE_NO_BLENDING,
+	.channels_mask = BIT(0),
+	.routes = {
+		/* R8A779H0 has one MIPI DSI output. */
+		[RCAR_DU_OUTPUT_DSI0] = {
+			.possible_crtcs = BIT(0),
+			.port = 0,
+		},
+	},
+	.num_rpf = 5,
+	.dsi_clk_mask = BIT(0),
+};
+
+static const struct of_device_id rcar_du_of_table[] = {
+	{ .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info },
+	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
+	{ .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
+	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
+	{ .compatible = "renesas,du-r8a77470", .data = &rzg1_du_r8a77470_info },
+	{ .compatible = "renesas,du-r8a774a1", .data = &rcar_du_r8a774a1_info },
+	{ .compatible = "renesas,du-r8a774b1", .data = &rcar_du_r8a774b1_info },
+	{ .compatible = "renesas,du-r8a774c0", .data = &rcar_du_r8a774c0_info },
+	{ .compatible = "renesas,du-r8a774e1", .data = &rcar_du_r8a774e1_info },
+	{ .compatible = "renesas,du-r8a7779", .data = &rcar_du_r8a7779_info },
+	{ .compatible = "renesas,du-r8a7790", .data = &rcar_du_r8a7790_info },
+	{ .compatible = "renesas,du-r8a7791", .data = &rcar_du_r8a7791_info },
+	{ .compatible = "renesas,du-r8a7792", .data = &rcar_du_r8a7792_info },
+	{ .compatible = "renesas,du-r8a7793", .data = &rcar_du_r8a7791_info },
+	{ .compatible = "renesas,du-r8a7794", .data = &rcar_du_r8a7794_info },
+	{ .compatible = "renesas,du-r8a7795", .data = &rcar_du_r8a7795_info },
+	{ .compatible = "renesas,du-r8a7796", .data = &rcar_du_r8a7796_info },
+	{ .compatible = "renesas,du-r8a77961", .data = &rcar_du_r8a7796_info },
+	{ .compatible = "renesas,du-r8a77965", .data = &rcar_du_r8a77965_info },
+	{ .compatible = "renesas,du-r8a77970", .data = &rcar_du_r8a77970_info },
+	{ .compatible = "renesas,du-r8a77980", .data = &rcar_du_r8a77970_info },
+	{ .compatible = "renesas,du-r8a77990", .data = &rcar_du_r8a7799x_info },
+	{ .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info },
+	{ .compatible = "renesas,du-r8a779a0", .data = &rcar_du_r8a779a0_info },
+	{ .compatible = "renesas,du-r8a779g0", .data = &rcar_du_r8a779g0_info },
+	{ .compatible = "renesas,du-r8a779h0", .data = &rcar_du_r8a779h0_info },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, rcar_du_of_table);
+
+const char *rcar_du_output_name(enum rcar_du_output output)
+{
+	static const char * const names[] = {
+		[RCAR_DU_OUTPUT_DPAD0] = "DPAD0",
+		[RCAR_DU_OUTPUT_DPAD1] = "DPAD1",
+		[RCAR_DU_OUTPUT_DSI0] = "DSI0",
+		[RCAR_DU_OUTPUT_DSI1] = "DSI1",
+		[RCAR_DU_OUTPUT_HDMI0] = "HDMI0",
+		[RCAR_DU_OUTPUT_HDMI1] = "HDMI1",
+		[RCAR_DU_OUTPUT_LVDS0] = "LVDS0",
+		[RCAR_DU_OUTPUT_LVDS1] = "LVDS1",
+		[RCAR_DU_OUTPUT_TCON] = "TCON",
+	};
+
+	if (output >= ARRAY_SIZE(names) || !names[output])
+		return "UNKNOWN";
+
+	return names[output];
+}
+
+/* -----------------------------------------------------------------------------
+ * DRM operations
+ */
+
+DEFINE_DRM_GEM_DMA_FOPS(rcar_du_fops);
+
+static const struct drm_driver rcar_du_driver = {
+	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
+	.dumb_create		= rcar_du_dumb_create,
+	.gem_prime_import_sg_table = rcar_du_gem_prime_import_sg_table,
+	DRM_FBDEV_DMA_DRIVER_OPS,
+	.fops			= &rcar_du_fops,
+	.name			= "rcar-du",
+	.desc			= "Renesas R-Car Display Unit",
+	.major			= 1,
+	.minor			= 0,
+};
+
+/* -----------------------------------------------------------------------------
+ * Power management
+ */
+
+static int rcar_du_pm_suspend(struct device *dev)
+{
+	struct rcar_du_device *rcdu = dev_get_drvdata(dev);
+
+	return drm_mode_config_helper_suspend(&rcdu->ddev);
+}
+
+static int rcar_du_pm_resume(struct device *dev)
+{
+	struct rcar_du_device *rcdu = dev_get_drvdata(dev);
+
+	return drm_mode_config_helper_resume(&rcdu->ddev);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(rcar_du_pm_ops,
+				rcar_du_pm_suspend, rcar_du_pm_resume);
+
+/* -----------------------------------------------------------------------------
+ * Platform driver
+ */
+
+static void rcar_du_remove(struct platform_device *pdev)
+{
+	struct rcar_du_device *rcdu = platform_get_drvdata(pdev);
+	struct drm_device *ddev = &rcdu->ddev;
+
+	drm_dev_unregister(ddev);
+	drm_atomic_helper_shutdown(ddev);
+
+	drm_kms_helper_poll_fini(ddev);
+}
+
+static void rcar_du_shutdown(struct platform_device *pdev)
+{
+	struct rcar_du_device *rcdu = platform_get_drvdata(pdev);
+
+	drm_atomic_helper_shutdown(&rcdu->ddev);
+}
+
+static int rcar_du_probe(struct platform_device *pdev)
+{
+	struct rcar_du_device *rcdu;
+	unsigned int mask;
+	int ret;
+
+	if (drm_firmware_drivers_only())
+		return -ENODEV;
+
+	/* Allocate and initialize the R-Car device structure. */
+	rcdu = devm_drm_dev_alloc(&pdev->dev, &rcar_du_driver,
+				  struct rcar_du_device, ddev);
+	if (IS_ERR(rcdu))
+		return PTR_ERR(rcdu);
+
+	rcdu->dev = &pdev->dev;
+
+	rcdu->info = of_device_get_match_data(rcdu->dev);
+
+	platform_set_drvdata(pdev, rcdu);
+
+	/* I/O resources */
+	rcdu->mmio = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(rcdu->mmio))
+		return PTR_ERR(rcdu->mmio);
+
+	/*
+	 * Set the DMA coherent mask to reflect the DU 32-bit DMA address space
+	 * limitations. When sourcing frames from a VSP the DU doesn't perform
+	 * any memory access so set the mask to 40 bits to accept all buffers.
+	 */
+	mask = rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE) ? 40 : 32;
+	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(mask));
+	if (ret)
+		return ret;
+
+	/* DRM/KMS objects */
+	ret = rcar_du_modeset_init(rcdu);
+	if (ret < 0) {
+		/*
+		 * Don't use dev_err_probe(), as it would overwrite the probe
+		 * deferral reason recorded in rcar_du_modeset_init().
+		 */
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"failed to initialize DRM/KMS (%d)\n", ret);
+		goto error;
+	}
+
+	/*
+	 * Register the DRM device with the core and the connectors with
+	 * sysfs.
+	 */
+	ret = drm_dev_register(&rcdu->ddev, 0);
+	if (ret)
+		goto error;
+
+	drm_info(&rcdu->ddev, "Device %s probed\n", dev_name(&pdev->dev));
+
+	drm_client_setup(&rcdu->ddev, NULL);
+
+	return 0;
+
+error:
+	drm_kms_helper_poll_fini(&rcdu->ddev);
+	return ret;
+}
+
+static struct platform_driver rcar_du_platform_driver = {
+	.probe		= rcar_du_probe,
+	.remove		= rcar_du_remove,
+	.shutdown	= rcar_du_shutdown,
+	.driver		= {
+		.name	= "rcar-du",
+		.pm	= pm_sleep_ptr(&rcar_du_pm_ops),
+		.of_match_table = rcar_du_of_table,
+	},
+};
+
+module_platform_driver(rcar_du_platform_driver);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
+MODULE_DESCRIPTION("Renesas R-Car Display Unit DRM Driver");
+MODULE_LICENSE("GPL");

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.h

@@ -0,0 +1,158 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * R-Car Display Unit DRM driver
+ *
+ * Copyright (C) 2013-2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#ifndef __RCAR_DU_DRV_H__
+#define __RCAR_DU_DRV_H__
+
+#include <linux/kernel.h>
+#include <linux/wait.h>
+
+#include <drm/drm_device.h>
+
+#include "rcar_cmm.h"
+#include "rcar_du_crtc.h"
+#include "rcar_du_group.h"
+#include "rcar_du_vsp.h"
+
+struct clk;
+struct device;
+struct device_link;
+struct drm_bridge;
+struct drm_property;
+struct rcar_du_device;
+
+#define RCAR_DU_FEATURE_CRTC_IRQ	BIT(0)	/* Per-CRTC IRQ */
+#define RCAR_DU_FEATURE_CRTC_CLOCK	BIT(1)	/* Per-CRTC clock */
+#define RCAR_DU_FEATURE_VSP1_SOURCE	BIT(2)	/* Has inputs from VSP1 */
+#define RCAR_DU_FEATURE_INTERLACED	BIT(3)	/* HW supports interlaced */
+#define RCAR_DU_FEATURE_TVM_SYNC	BIT(4)	/* Has TV switch/sync modes */
+#define RCAR_DU_FEATURE_NO_BLENDING	BIT(5)	/* PnMR.SPIM does not have ALP nor EOR bits */
+
+#define RCAR_DU_QUIRK_ALIGN_128B	BIT(0)	/* Align pitches to 128 bytes */
+
+enum rcar_du_output {
+	RCAR_DU_OUTPUT_DPAD0,
+	RCAR_DU_OUTPUT_DPAD1,
+	RCAR_DU_OUTPUT_DSI0,
+	RCAR_DU_OUTPUT_DSI1,
+	RCAR_DU_OUTPUT_HDMI0,
+	RCAR_DU_OUTPUT_HDMI1,
+	RCAR_DU_OUTPUT_LVDS0,
+	RCAR_DU_OUTPUT_LVDS1,
+	RCAR_DU_OUTPUT_TCON,
+	RCAR_DU_OUTPUT_MAX,
+};
+
+/*
+ * struct rcar_du_output_routing - Output routing specification
+ * @possible_crtcs: bitmask of possible CRTCs for the output
+ * @port: device tree port number corresponding to this output route
+ *
+ * The DU has 5 possible outputs (DPAD0/1, LVDS0/1, TCON). Output routing data
+ * specify the valid SoC outputs, which CRTCs can drive the output, and the type
+ * of in-SoC encoder for the output.
+ */
+struct rcar_du_output_routing {
+	unsigned int possible_crtcs;
+	unsigned int port;
+};
+
+/*
+ * struct rcar_du_device_info - DU model-specific information
+ * @gen: device generation (2 or 3)
+ * @features: device features (RCAR_DU_FEATURE_*)
+ * @quirks: device quirks (RCAR_DU_QUIRK_*)
+ * @channels_mask: bit mask of available DU channels
+ * @routes: array of CRTC to output routes, indexed by output (RCAR_DU_OUTPUT_*)
+ * @num_lvds: number of internal LVDS encoders
+ * @num_rpf: number of RPFs in VSP
+ * @dpll_mask: bit mask of DU channels equipped with a DPLL
+ * @dsi_clk_mask: bitmask of channels that can use the DSI clock as dot clock
+ * @lvds_clk_mask: bitmask of channels that can use the LVDS clock as dot clock
+ */
+struct rcar_du_device_info {
+	unsigned int gen;
+	unsigned int features;
+	unsigned int quirks;
+	unsigned int channels_mask;
+	struct rcar_du_output_routing routes[RCAR_DU_OUTPUT_MAX];
+	unsigned int num_lvds;
+	unsigned int num_rpf;
+	unsigned int dpll_mask;
+	unsigned int dsi_clk_mask;
+	unsigned int lvds_clk_mask;
+};
+
+struct rcar_du_cmm {
+	struct device *dev;
+	struct device_link *link;
+};
+
+#define RCAR_DU_MAX_CRTCS		4
+#define RCAR_DU_MAX_GROUPS		DIV_ROUND_UP(RCAR_DU_MAX_CRTCS, 2)
+#define RCAR_DU_MAX_VSPS		4
+#define RCAR_DU_MAX_LVDS		2
+#define RCAR_DU_MAX_DSI			2
+
+struct rcar_du_device {
+	struct device *dev;
+	const struct rcar_du_device_info *info;
+
+	void __iomem *mmio;
+
+	struct drm_device ddev;
+
+	struct rcar_du_crtc crtcs[RCAR_DU_MAX_CRTCS];
+	unsigned int num_crtcs;
+
+	struct rcar_du_group groups[RCAR_DU_MAX_GROUPS];
+	struct rcar_du_cmm cmms[RCAR_DU_MAX_CRTCS];
+	struct rcar_du_vsp vsps[RCAR_DU_MAX_VSPS];
+	struct drm_bridge *lvds[RCAR_DU_MAX_LVDS];
+	struct drm_bridge *dsi[RCAR_DU_MAX_DSI];
+
+	struct {
+		struct drm_property *colorkey;
+	} props;
+
+	unsigned int dpad0_source;
+	unsigned int dpad1_source;
+	unsigned int vspd1_sink;
+};
+
+static inline struct rcar_du_device *to_rcar_du_device(struct drm_device *dev)
+{
+	return container_of(dev, struct rcar_du_device, ddev);
+}
+
+static inline bool rcar_du_has(struct rcar_du_device *rcdu,
+			       unsigned int feature)
+{
+	return rcdu->info->features & feature;
+}
+
+static inline bool rcar_du_needs(struct rcar_du_device *rcdu,
+				 unsigned int quirk)
+{
+	return rcdu->info->quirks & quirk;
+}
+
+static inline u32 rcar_du_read(struct rcar_du_device *rcdu, u32 reg)
+{
+	return ioread32(rcdu->mmio + reg);
+}
+
+static inline void rcar_du_write(struct rcar_du_device *rcdu, u32 reg, u32 data)
+{
+	iowrite32(data, rcdu->mmio + reg);
+}
+
+const char *rcar_du_output_name(enum rcar_du_output output);
+
+#endif /* __RCAR_DU_DRV_H__ */

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_encoder.c

@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * R-Car Display Unit Encoder
+ *
+ * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/export.h>
+#include <linux/of.h>
+
+#include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
+#include <drm/drm_panel.h>
+
+#include "rcar_du_drv.h"
+#include "rcar_du_encoder.h"
+#include "rcar_lvds.h"
+
+/* -----------------------------------------------------------------------------
+ * Encoder
+ */
+
+static unsigned int rcar_du_encoder_count_ports(struct device_node *node)
+{
+	struct device_node *ports;
+	struct device_node *port;
+	unsigned int num_ports = 0;
+
+	ports = of_get_child_by_name(node, "ports");
+	if (!ports)
+		ports = of_node_get(node);
+
+	for_each_child_of_node(ports, port) {
+		if (of_node_name_eq(port, "port"))
+			num_ports++;
+	}
+
+	of_node_put(ports);
+
+	return num_ports;
+}
+
+static const struct drm_encoder_funcs rcar_du_encoder_funcs = {
+};
+
+int rcar_du_encoder_init(struct rcar_du_device *rcdu,
+			 enum rcar_du_output output,
+			 struct device_node *enc_node)
+{
+	struct rcar_du_encoder *renc;
+	struct drm_connector *connector;
+	struct drm_bridge *bridge __free(drm_bridge_put) = NULL;
+	int ret;
+
+	/*
+	 * Locate the DRM bridge from the DT node. For the DPAD outputs, if the
+	 * DT node has a single port, assume that it describes a panel and
+	 * create a panel bridge.
+	 */
+	if ((output == RCAR_DU_OUTPUT_DPAD0 ||
+	     output == RCAR_DU_OUTPUT_DPAD1) &&
+	    rcar_du_encoder_count_ports(enc_node) == 1) {
+		struct drm_panel *panel = of_drm_find_panel(enc_node);
+
+		if (IS_ERR(panel))
+			return PTR_ERR(panel);
+
+		bridge = devm_drm_panel_bridge_add_typed(rcdu->dev, panel,
+							 DRM_MODE_CONNECTOR_DPI);
+		if (IS_ERR(bridge))
+			return PTR_ERR(no_free_ptr(bridge));
+
+		/*
+		 * The reference taken by devm_drm_panel_bridge_add_typed() is
+		 * released automatically. Take a second one for the __free()
+		 * when this function will return.
+		 */
+		drm_bridge_get(bridge);
+	} else {
+		bridge = of_drm_find_and_get_bridge(enc_node);
+		if (!bridge)
+			return -EPROBE_DEFER;
+
+		if (output == RCAR_DU_OUTPUT_LVDS0 ||
+		    output == RCAR_DU_OUTPUT_LVDS1)
+			rcdu->lvds[output - RCAR_DU_OUTPUT_LVDS0] =
+				drm_bridge_get(bridge);
+
+		if (output == RCAR_DU_OUTPUT_DSI0 ||
+		    output == RCAR_DU_OUTPUT_DSI1)
+			rcdu->dsi[output - RCAR_DU_OUTPUT_DSI0] =
+				drm_bridge_get(bridge);
+	}
+
+	/*
+	 * Create and initialize the encoder. On Gen3, skip the LVDS1 output if
+	 * the LVDS1 encoder is used as a companion for LVDS0 in dual-link
+	 * mode, or any LVDS output if it isn't connected. The latter may happen
+	 * on D3 or E3 as the LVDS encoders are needed to provide the pixel
+	 * clock to the DU, even when the LVDS outputs are not used.
+	 */
+	if (rcdu->info->gen >= 3) {
+		if (output == RCAR_DU_OUTPUT_LVDS1 &&
+		    rcar_lvds_dual_link(bridge))
+			return -ENOLINK;
+
+		if ((output == RCAR_DU_OUTPUT_LVDS0 ||
+		     output == RCAR_DU_OUTPUT_LVDS1) &&
+		    !rcar_lvds_is_connected(bridge))
+			return -ENOLINK;
+	}
+
+	dev_dbg(rcdu->dev, "initializing encoder %pOF for output %s\n",
+		enc_node, rcar_du_output_name(output));
+
+	renc = drmm_encoder_alloc(&rcdu->ddev, struct rcar_du_encoder, base,
+				  &rcar_du_encoder_funcs, DRM_MODE_ENCODER_NONE,
+				  NULL);
+	if (IS_ERR(renc))
+		return PTR_ERR(renc);
+
+	renc->output = output;
+
+	/* Attach the bridge to the encoder. */
+	ret = drm_bridge_attach(&renc->base, bridge, NULL,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	if (ret) {
+		dev_err(rcdu->dev,
+			"failed to attach bridge %pOF for output %s (%d)\n",
+			bridge->of_node, rcar_du_output_name(output), ret);
+		return ret;
+	}
+
+	/* Create the connector for the chain of bridges. */
+	connector = drm_bridge_connector_init(&rcdu->ddev, &renc->base);
+	if (IS_ERR(connector)) {
+		dev_err(rcdu->dev,
+			"failed to created connector for output %s (%ld)\n",
+			rcar_du_output_name(output), PTR_ERR(connector));
+		return PTR_ERR(connector);
+	}
+
+	return 0;
+}
+
+void rcar_du_encoder_cleanup(struct rcar_du_device *rcdu)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(rcdu->lvds); i++)
+		drm_bridge_put(rcdu->lvds[i]);
+	for (i = 0; i < ARRAY_SIZE(rcdu->dsi); i++)
+		drm_bridge_put(rcdu->dsi[i]);
+}

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_encoder.h

@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * R-Car Display Unit Encoder
+ *
+ * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#ifndef __RCAR_DU_ENCODER_H__
+#define __RCAR_DU_ENCODER_H__
+
+#include <drm/drm_encoder.h>
+
+struct rcar_du_device;
+
+struct rcar_du_encoder {
+	struct drm_encoder base;
+	enum rcar_du_output output;
+};
+
+#define to_rcar_encoder(e) \
+	container_of(e, struct rcar_du_encoder, base)
+
+int rcar_du_encoder_init(struct rcar_du_device *rcdu,
+			 enum rcar_du_output output,
+			 struct device_node *enc_node);
+void rcar_du_encoder_cleanup(struct rcar_du_device *rcdu);
+
+#endif /* __RCAR_DU_ENCODER_H__ */

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c

@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * R-Car Display Unit Channels Pair
+ *
+ * Copyright (C) 2013-2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+/*
+ * The R8A7779 DU is split in per-CRTC resources (scan-out engine, blending
+ * unit, timings generator, ...) and device-global resources (start/stop
+ * control, planes, ...) shared between the two CRTCs.
+ *
+ * The R8A7790 introduced a third CRTC with its own set of global resources.
+ * This would be modeled as two separate DU device instances if it wasn't for
+ * a handful or resources that are shared between the three CRTCs (mostly
+ * related to input and output routing). For this reason the R8A7790 DU must be
+ * modeled as a single device with three CRTCs, two sets of "semi-global"
+ * resources, and a few device-global resources.
+ *
+ * The rcar_du_group object is a driver specific object, without any real
+ * counterpart in the DU documentation, that models those semi-global resources.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include "rcar_du_drv.h"
+#include "rcar_du_group.h"
+#include "rcar_du_regs.h"
+
+u32 rcar_du_group_read(struct rcar_du_group *rgrp, u32 reg)
+{
+	return rcar_du_read(rgrp->dev, rgrp->mmio_offset + reg);
+}
+
+void rcar_du_group_write(struct rcar_du_group *rgrp, u32 reg, u32 data)
+{
+	rcar_du_write(rgrp->dev, rgrp->mmio_offset + reg, data);
+}
+
+static void rcar_du_group_setup_pins(struct rcar_du_group *rgrp)
+{
+	u32 defr6 = DEFR6_CODE;
+
+	if (rgrp->channels_mask & BIT(0))
+		defr6 |= DEFR6_ODPM02_DISP;
+
+	if (rgrp->channels_mask & BIT(1))
+		defr6 |= DEFR6_ODPM12_DISP;
+
+	rcar_du_group_write(rgrp, DEFR6, defr6);
+}
+
+static void rcar_du_group_setup_defr8(struct rcar_du_group *rgrp)
+{
+	struct rcar_du_device *rcdu = rgrp->dev;
+	u32 defr8 = DEFR8_CODE;
+
+	if (rcdu->info->gen < 3) {
+		defr8 |= DEFR8_DEFE8;
+
+		/*
+		 * On Gen2 the DEFR8 register for the first group also controls
+		 * RGB output routing to DPAD0 and VSPD1 routing to DU0/1/2 for
+		 * DU instances that support it.
+		 */
+		if (rgrp->index == 0) {
+			defr8 |= DEFR8_DRGBS_DU(rcdu->dpad0_source);
+			if (rgrp->dev->vspd1_sink == 2)
+				defr8 |= DEFR8_VSCS;
+		}
+	} else {
+		/*
+		 * On Gen3 VSPD routing can't be configured, and DPAD routing
+		 * is set in the group corresponding to the DPAD output (no Gen3
+		 * SoC has multiple DPAD sources belonging to separate groups).
+		 */
+		if (rgrp->index == rcdu->dpad0_source / 2)
+			defr8 |= DEFR8_DRGBS_DU(rcdu->dpad0_source);
+	}
+
+	rcar_du_group_write(rgrp, DEFR8, defr8);
+}
+
+static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp)
+{
+	struct rcar_du_device *rcdu = rgrp->dev;
+	struct rcar_du_crtc *rcrtc;
+	unsigned int num_crtcs = 0;
+	unsigned int i;
+	u32 didsr;
+
+	/*
+	 * Configure input dot clock routing with a hardcoded configuration. If
+	 * the DU channel can use the LVDS encoder output clock as the dot
+	 * clock, do so. Otherwise route DU_DOTCLKINn signal to DUn.
+	 *
+	 * Each channel can then select between the dot clock configured here
+	 * and the clock provided by the CPG through the ESCR register.
+	 */
+	if (rcdu->info->gen < 3 && rgrp->index == 0) {
+		/*
+		 * On Gen2 a single register in the first group controls dot
+		 * clock selection for all channels.
+		 */
+		rcrtc = rcdu->crtcs;
+		num_crtcs = rcdu->num_crtcs;
+	} else if ((rcdu->info->gen == 3 && rgrp->num_crtcs > 1) ||
+		   rcdu->info->gen == 4) {
+		/*
+		 * On Gen3 dot clocks are setup through per-group registers,
+		 * only available when the group has two channels.
+		 * On Gen4 the registers are there for single channel too.
+		 */
+		rcrtc = &rcdu->crtcs[rgrp->index * 2];
+		num_crtcs = rgrp->num_crtcs;
+	}
+
+	if (!num_crtcs)
+		return;
+
+	didsr = DIDSR_CODE;
+	for (i = 0; i < num_crtcs; ++i, ++rcrtc) {
+		if (rcdu->info->lvds_clk_mask & BIT(rcrtc->index))
+			didsr |= DIDSR_LDCS_LVDS0(i)
+			      |  DIDSR_PDCS_CLK(i, 0);
+		else if (rcdu->info->dsi_clk_mask & BIT(rcrtc->index))
+			didsr |= DIDSR_LDCS_DSI(i);
+		else
+			didsr |= DIDSR_LDCS_DCLKIN(i)
+			      |  DIDSR_PDCS_CLK(i, 0);
+	}
+
+	rcar_du_group_write(rgrp, DIDSR, didsr);
+}
+
+static void rcar_du_group_setup(struct rcar_du_group *rgrp)
+{
+	struct rcar_du_device *rcdu = rgrp->dev;
+	u32 defr7 = DEFR7_CODE;
+	u32 dorcr;
+
+	/* Enable extended features */
+	rcar_du_group_write(rgrp, DEFR, DEFR_CODE | DEFR_DEFE);
+	if (rcdu->info->gen < 3) {
+		rcar_du_group_write(rgrp, DEFR2, DEFR2_CODE | DEFR2_DEFE2G);
+		rcar_du_group_write(rgrp, DEFR3, DEFR3_CODE | DEFR3_DEFE3);
+		rcar_du_group_write(rgrp, DEFR4, DEFR4_CODE);
+	}
+	rcar_du_group_write(rgrp, DEFR5, DEFR5_CODE | DEFR5_DEFE5);
+
+	if (rcdu->info->gen < 4)
+		rcar_du_group_setup_pins(rgrp);
+
+	if (rcdu->info->gen < 4) {
+		/*
+		 * TODO: Handle routing of the DU output to CMM dynamically, as
+		 * we should bypass CMM completely when no color management
+		 * feature is used.
+		 */
+		defr7 |= (rgrp->cmms_mask & BIT(1) ? DEFR7_CMME1 : 0) |
+			 (rgrp->cmms_mask & BIT(0) ? DEFR7_CMME0 : 0);
+		rcar_du_group_write(rgrp, DEFR7, defr7);
+	}
+
+	if (rcdu->info->gen >= 2) {
+		if (rcdu->info->gen < 4)
+			rcar_du_group_setup_defr8(rgrp);
+		rcar_du_group_setup_didsr(rgrp);
+	}
+
+	if (rcdu->info->gen >= 3)
+		rcar_du_group_write(rgrp, DEFR10, DEFR10_CODE | DEFR10_DEFE10);
+
+	/*
+	 * Use DS1PR and DS2PR to configure planes priorities and connects the
+	 * superposition 0 to DU0 pins. DU1 pins will be configured dynamically.
+	 *
+	 * Groups that have a single channel have a hardcoded configuration. On
+	 * Gen3 and newer, the documentation requires PG1T, DK1S and PG1D_DS1 to
+	 * always be set in this case.
+	 */
+	dorcr = DORCR_PG0D_DS0 | DORCR_DPRS;
+	if (rcdu->info->gen >= 3 && rgrp->num_crtcs == 1)
+		dorcr |= DORCR_PG1T | DORCR_DK1S | DORCR_PG1D_DS1;
+	rcar_du_group_write(rgrp, DORCR, dorcr);
+
+	/*
+	 * DPTSR is used to select the source for the planes of a group. The
+	 * first source is chosen by writing 0 to the respective bits, and this
+	 * is always the default value of the register. In other words, writing
+	 * DPTSR is only needed if the SoC supports choosing the second source.
+	 *
+	 * The SoCs documentations seems to confirm this, as the DPTSR register
+	 * is not documented if only the first source exists on that SoC.
+	 */
+	if (rgrp->channels_mask & BIT(1)) {
+		mutex_lock(&rgrp->lock);
+		rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) |
+				    rgrp->dptsr_planes);
+		mutex_unlock(&rgrp->lock);
+	}
+}
+
+/*
+ * rcar_du_group_get - Acquire a reference to the DU channels group
+ *
+ * Acquiring the first reference setups core registers. A reference must be held
+ * before accessing any hardware registers.
+ *
+ * This function must be called with the DRM mode_config lock held.
+ *
+ * Return 0 in case of success or a negative error code otherwise.
+ */
+int rcar_du_group_get(struct rcar_du_group *rgrp)
+{
+	if (rgrp->use_count)
+		goto done;
+
+	rcar_du_group_setup(rgrp);
+
+done:
+	rgrp->use_count++;
+	return 0;
+}
+
+/*
+ * rcar_du_group_put - Release a reference to the DU
+ *
+ * This function must be called with the DRM mode_config lock held.
+ */
+void rcar_du_group_put(struct rcar_du_group *rgrp)
+{
+	--rgrp->use_count;
+}
+
+static void __rcar_du_group_start_stop(struct rcar_du_group *rgrp, bool start)
+{
+	struct rcar_du_device *rcdu = rgrp->dev;
+
+	/*
+	 * Group start/stop is controlled by the DRES and DEN bits of DSYSR0
+	 * for the first group and DSYSR2 for the second group. On most DU
+	 * instances, this maps to the first CRTC of the group, and we can just
+	 * use rcar_du_crtc_dsysr_clr_set() to access the correct DSYSR. On
+	 * M3-N, however, DU2 doesn't exist, but DSYSR2 does. We thus need to
+	 * access the register directly using group read/write.
+	 */
+	if (rcdu->info->channels_mask & BIT(rgrp->index * 2)) {
+		struct rcar_du_crtc *rcrtc = &rgrp->dev->crtcs[rgrp->index * 2];
+
+		rcar_du_crtc_dsysr_clr_set(rcrtc, DSYSR_DRES | DSYSR_DEN,
+					   start ? DSYSR_DEN : DSYSR_DRES);
+	} else {
+		rcar_du_group_write(rgrp, DSYSR,
+				    start ? DSYSR_DEN : DSYSR_DRES);
+	}
+}
+
+void rcar_du_group_start_stop(struct rcar_du_group *rgrp, bool start)
+{
+	/*
+	 * Many of the configuration bits are only updated when the display
+	 * reset (DRES) bit in DSYSR is set to 1, disabling *both* CRTCs. Some
+	 * of those bits could be pre-configured, but others (especially the
+	 * bits related to plane assignment to display timing controllers) need
+	 * to be modified at runtime.
+	 *
+	 * Restart the display controller if a start is requested. Sorry for the
+	 * flicker. It should be possible to move most of the "DRES-update" bits
+	 * setup to driver initialization time and minimize the number of cases
+	 * when the display controller will have to be restarted.
+	 */
+	if (start) {
+		if (rgrp->used_crtcs++ != 0)
+			__rcar_du_group_start_stop(rgrp, false);
+		__rcar_du_group_start_stop(rgrp, true);
+	} else {
+		if (--rgrp->used_crtcs == 0)
+			__rcar_du_group_start_stop(rgrp, false);
+	}
+}
+
+void rcar_du_group_restart(struct rcar_du_group *rgrp)
+{
+	rgrp->need_restart = false;
+
+	__rcar_du_group_start_stop(rgrp, false);
+	__rcar_du_group_start_stop(rgrp, true);
+}
+
+int rcar_du_set_dpad0_vsp1_routing(struct rcar_du_device *rcdu)
+{
+	struct rcar_du_group *rgrp;
+	struct rcar_du_crtc *crtc;
+	unsigned int index;
+	int ret;
+
+	if (rcdu->info->gen < 2)
+		return 0;
+
+	/*
+	 * RGB output routing to DPAD0 and VSP1D routing to DU0/1/2 are
+	 * configured in the DEFR8 register of the first group on Gen2 and the
+	 * last group on Gen3. As this function can be called with the DU
+	 * channels of the corresponding CRTCs disabled, we need to enable the
+	 * group clock before accessing the register.
+	 */
+	index = rcdu->info->gen < 3 ? 0 : DIV_ROUND_UP(rcdu->num_crtcs, 2) - 1;
+	rgrp = &rcdu->groups[index];
+	crtc = &rcdu->crtcs[index * 2];
+
+	ret = clk_prepare_enable(crtc->clock);
+	if (ret < 0)
+		return ret;
+
+	rcar_du_group_setup_defr8(rgrp);
+
+	clk_disable_unprepare(crtc->clock);
+
+	return 0;
+}
+
+static void rcar_du_group_set_dpad_levels(struct rcar_du_group *rgrp)
+{
+	static const u32 doflr_values[2] = {
+		DOFLR_HSYCFL0 | DOFLR_VSYCFL0 | DOFLR_ODDFL0 |
+		DOFLR_DISPFL0 | DOFLR_CDEFL0  | DOFLR_RGBFL0,
+		DOFLR_HSYCFL1 | DOFLR_VSYCFL1 | DOFLR_ODDFL1 |
+		DOFLR_DISPFL1 | DOFLR_CDEFL1  | DOFLR_RGBFL1,
+	};
+	static const u32 dpad_mask = BIT(RCAR_DU_OUTPUT_DPAD1)
+				   | BIT(RCAR_DU_OUTPUT_DPAD0);
+	struct rcar_du_device *rcdu = rgrp->dev;
+	u32 doflr = DOFLR_CODE;
+	unsigned int i;
+
+	if (rcdu->info->gen < 2)
+		return;
+
+	/*
+	 * The DPAD outputs can't be controlled directly. However, the parallel
+	 * output of the DU channels routed to DPAD can be set to fixed levels
+	 * through the DOFLR group register. Use this to turn the DPAD on or off
+	 * by driving fixed low-level signals at the output of any DU channel
+	 * not routed to a DPAD output. This doesn't affect the DU output
+	 * signals going to other outputs, such as the internal LVDS and HDMI
+	 * encoders.
+	 */
+
+	for (i = 0; i < rgrp->num_crtcs; ++i) {
+		struct rcar_du_crtc_state *rstate;
+		struct rcar_du_crtc *rcrtc;
+
+		rcrtc = &rcdu->crtcs[rgrp->index * 2 + i];
+		rstate = to_rcar_crtc_state(rcrtc->crtc.state);
+
+		if (!(rstate->outputs & dpad_mask))
+			doflr |= doflr_values[i];
+	}
+
+	rcar_du_group_write(rgrp, DOFLR, doflr);
+}
+
+int rcar_du_group_set_routing(struct rcar_du_group *rgrp)
+{
+	struct rcar_du_device *rcdu = rgrp->dev;
+	u32 dorcr = rcar_du_group_read(rgrp, DORCR);
+
+	dorcr &= ~(DORCR_PG1T | DORCR_DK1S | DORCR_PG1D_MASK);
+
+	/*
+	 * Set the DPAD1 pins sources. Select CRTC 0 if explicitly requested and
+	 * CRTC 1 in all other cases to avoid cloning CRTC 0 to DPAD0 and DPAD1
+	 * by default.
+	 */
+	if (rcdu->dpad1_source == rgrp->index * 2)
+		dorcr |= DORCR_PG1D_DS0;
+	else
+		dorcr |= DORCR_PG1T | DORCR_DK1S | DORCR_PG1D_DS1;
+
+	rcar_du_group_write(rgrp, DORCR, dorcr);
+
+	rcar_du_group_set_dpad_levels(rgrp);
+
+	return rcar_du_set_dpad0_vsp1_routing(rgrp->dev);
+}

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.h

@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * R-Car Display Unit Planes and CRTCs Group
+ *
+ * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#ifndef __RCAR_DU_GROUP_H__
+#define __RCAR_DU_GROUP_H__
+
+#include <linux/mutex.h>
+
+#include "rcar_du_plane.h"
+
+struct rcar_du_device;
+
+/*
+ * struct rcar_du_group - CRTCs and planes group
+ * @dev: the DU device
+ * @mmio_offset: registers offset in the device memory map
+ * @index: group index
+ * @channels_mask: bitmask of populated DU channels in this group
+ * @cmms_mask: bitmask of available CMMs in this group
+ * @num_crtcs: number of CRTCs in this group (1 or 2)
+ * @use_count: number of users of the group (rcar_du_group_(get|put))
+ * @used_crtcs: number of CRTCs currently in use
+ * @lock: protects the dptsr_planes field and the DPTSR register
+ * @dptsr_planes: bitmask of planes driven by dot-clock and timing generator 1
+ * @num_planes: number of planes in the group
+ * @planes: planes handled by the group
+ * @need_restart: the group needs to be restarted due to a configuration change
+ */
+struct rcar_du_group {
+	struct rcar_du_device *dev;
+	unsigned int mmio_offset;
+	unsigned int index;
+
+	unsigned int channels_mask;
+	unsigned int cmms_mask;
+	unsigned int num_crtcs;
+	unsigned int use_count;
+	unsigned int used_crtcs;
+
+	struct mutex lock;
+	unsigned int dptsr_planes;
+
+	unsigned int num_planes;
+	struct rcar_du_plane planes[RCAR_DU_NUM_KMS_PLANES];
+	bool need_restart;
+};
+
+u32 rcar_du_group_read(struct rcar_du_group *rgrp, u32 reg);
+void rcar_du_group_write(struct rcar_du_group *rgrp, u32 reg, u32 data);
+
+int rcar_du_group_get(struct rcar_du_group *rgrp);
+void rcar_du_group_put(struct rcar_du_group *rgrp);
+void rcar_du_group_start_stop(struct rcar_du_group *rgrp, bool start);
+void rcar_du_group_restart(struct rcar_du_group *rgrp);
+int rcar_du_group_set_routing(struct rcar_du_group *rgrp);
+
+int rcar_du_set_dpad0_vsp1_routing(struct rcar_du_device *rcdu);
+
+#endif /* __RCAR_DU_GROUP_H__ */

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_kms.h

@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * R-Car Display Unit Mode Setting
+ *
+ * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#ifndef __RCAR_DU_KMS_H__
+#define __RCAR_DU_KMS_H__
+
+#include <linux/types.h>
+
+struct dma_buf_attachment;
+struct drm_file;
+struct drm_device;
+struct drm_gem_object;
+struct drm_mode_create_dumb;
+struct rcar_du_device;
+struct sg_table;
+
+struct rcar_du_format_info {
+	u32 fourcc;
+	u32 v4l2;
+	unsigned int bpp;
+	unsigned int planes;
+	unsigned int hsub;
+	unsigned int pnmr;
+	unsigned int edf;
+};
+
+const struct rcar_du_format_info *rcar_du_format_info(u32 fourcc);
+
+int rcar_du_modeset_init(struct rcar_du_device *rcdu);
+
+int rcar_du_dumb_create(struct drm_file *file, struct drm_device *dev,
+			struct drm_mode_create_dumb *args);
+
+struct drm_gem_object *rcar_du_gem_prime_import_sg_table(struct drm_device *dev,
+				struct dma_buf_attachment *attach,
+				struct sg_table *sgt);
+
+#endif /* __RCAR_DU_KMS_H__ */

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_plane.c

@@ -0,0 +1,842 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * R-Car Display Unit Planes
+ *
+ * Copyright (C) 2013-2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_blend.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_fb_dma_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_dma_helper.h>
+
+#include "rcar_du_drv.h"
+#include "rcar_du_group.h"
+#include "rcar_du_kms.h"
+#include "rcar_du_plane.h"
+#include "rcar_du_regs.h"
+
+/* -----------------------------------------------------------------------------
+ * Atomic hardware plane allocator
+ *
+ * The hardware plane allocator is solely based on the atomic plane states
+ * without keeping any external state to avoid races between .atomic_check()
+ * and .atomic_commit().
+ *
+ * The core idea is to avoid using a free planes bitmask that would need to be
+ * shared between check and commit handlers with a collective knowledge based on
+ * the allocated hardware plane(s) for each KMS plane. The allocator then loops
+ * over all plane states to compute the free planes bitmask, allocates hardware
+ * planes based on that bitmask, and stores the result back in the plane states.
+ *
+ * For this to work we need to access the current state of planes not touched by
+ * the atomic update. To ensure that it won't be modified, we need to lock all
+ * planes using drm_atomic_get_plane_state(). This effectively serializes atomic
+ * updates from .atomic_check() up to completion (when swapping the states if
+ * the check step has succeeded) or rollback (when freeing the states if the
+ * check step has failed).
+ *
+ * Allocation is performed in the .atomic_check() handler and applied
+ * automatically when the core swaps the old and new states.
+ */
+
+static bool rcar_du_plane_needs_realloc(
+				const struct rcar_du_plane_state *old_state,
+				const struct rcar_du_plane_state *new_state)
+{
+	/*
+	 * Lowering the number of planes doesn't strictly require reallocation
+	 * as the extra hardware plane will be freed when committing, but doing
+	 * so could lead to more fragmentation.
+	 */
+	if (!old_state->format ||
+	    old_state->format->planes != new_state->format->planes)
+		return true;
+
+	/* Reallocate hardware planes if the source has changed. */
+	if (old_state->source != new_state->source)
+		return true;
+
+	return false;
+}
+
+static unsigned int rcar_du_plane_hwmask(struct rcar_du_plane_state *state)
+{
+	unsigned int mask;
+
+	if (state->hwindex == -1)
+		return 0;
+
+	mask = 1 << state->hwindex;
+	if (state->format->planes == 2)
+		mask |= 1 << ((state->hwindex + 1) % 8);
+
+	return mask;
+}
+
+/*
+ * The R8A7790 DU can source frames directly from the VSP1 devices VSPD0 and
+ * VSPD1. VSPD0 feeds DU0/1 plane 0, and VSPD1 feeds either DU2 plane 0 or
+ * DU0/1 plane 1.
+ *
+ * Allocate the correct fixed plane when sourcing frames from VSPD0 or VSPD1,
+ * and allocate planes in reverse index order otherwise to ensure maximum
+ * availability of planes 0 and 1.
+ *
+ * The caller is responsible for ensuring that the requested source is
+ * compatible with the DU revision.
+ */
+static int rcar_du_plane_hwalloc(struct rcar_du_plane *plane,
+				 struct rcar_du_plane_state *state,
+				 unsigned int free)
+{
+	unsigned int num_planes = state->format->planes;
+	int fixed = -1;
+	int i;
+
+	if (state->source == RCAR_DU_PLANE_VSPD0) {
+		/* VSPD0 feeds plane 0 on DU0/1. */
+		if (plane->group->index != 0)
+			return -EINVAL;
+
+		fixed = 0;
+	} else if (state->source == RCAR_DU_PLANE_VSPD1) {
+		/* VSPD1 feeds plane 1 on DU0/1 or plane 0 on DU2. */
+		fixed = plane->group->index == 0 ? 1 : 0;
+	}
+
+	if (fixed >= 0)
+		return free & (1 << fixed) ? fixed : -EBUSY;
+
+	for (i = RCAR_DU_NUM_HW_PLANES - 1; i >= 0; --i) {
+		if (!(free & (1 << i)))
+			continue;
+
+		if (num_planes == 1 || free & (1 << ((i + 1) % 8)))
+			break;
+	}
+
+	return i < 0 ? -EBUSY : i;
+}
+
+int rcar_du_atomic_check_planes(struct drm_device *dev,
+				struct drm_atomic_commit *state)
+{
+	struct rcar_du_device *rcdu = to_rcar_du_device(dev);
+	unsigned int group_freed_planes[RCAR_DU_MAX_GROUPS] = { 0, };
+	unsigned int group_free_planes[RCAR_DU_MAX_GROUPS] = { 0, };
+	bool needs_realloc = false;
+	unsigned int groups = 0;
+	unsigned int i;
+	struct drm_plane *drm_plane;
+	struct drm_plane_state *old_drm_plane_state;
+	struct drm_plane_state *new_drm_plane_state;
+
+	/* Check if hardware planes need to be reallocated. */
+	for_each_oldnew_plane_in_state(state, drm_plane, old_drm_plane_state,
+				       new_drm_plane_state, i) {
+		struct rcar_du_plane_state *old_plane_state;
+		struct rcar_du_plane_state *new_plane_state;
+		struct rcar_du_plane *plane;
+		unsigned int index;
+
+		plane = to_rcar_plane(drm_plane);
+		old_plane_state = to_rcar_plane_state(old_drm_plane_state);
+		new_plane_state = to_rcar_plane_state(new_drm_plane_state);
+
+		dev_dbg(rcdu->dev, "%s: checking plane (%u,%tu)\n", __func__,
+			plane->group->index, plane - plane->group->planes);
+
+		/*
+		 * If the plane is being disabled we don't need to go through
+		 * the full reallocation procedure. Just mark the hardware
+		 * plane(s) as freed.
+		 */
+		if (!new_plane_state->format) {
+			dev_dbg(rcdu->dev, "%s: plane is being disabled\n",
+				__func__);
+			index = plane - plane->group->planes;
+			group_freed_planes[plane->group->index] |= 1 << index;
+			new_plane_state->hwindex = -1;
+			continue;
+		}
+
+		/*
+		 * If the plane needs to be reallocated mark it as such, and
+		 * mark the hardware plane(s) as free.
+		 */
+		if (rcar_du_plane_needs_realloc(old_plane_state, new_plane_state)) {
+			dev_dbg(rcdu->dev, "%s: plane needs reallocation\n",
+				__func__);
+			groups |= 1 << plane->group->index;
+			needs_realloc = true;
+
+			index = plane - plane->group->planes;
+			group_freed_planes[plane->group->index] |= 1 << index;
+			new_plane_state->hwindex = -1;
+		}
+	}
+
+	if (!needs_realloc)
+		return 0;
+
+	/*
+	 * Grab all plane states for the groups that need reallocation to ensure
+	 * locking and avoid racy updates. This serializes the update operation,
+	 * but there's not much we can do about it as that's the hardware
+	 * design.
+	 *
+	 * Compute the used planes mask for each group at the same time to avoid
+	 * looping over the planes separately later.
+	 */
+	while (groups) {
+		unsigned int index = ffs(groups) - 1;
+		struct rcar_du_group *group = &rcdu->groups[index];
+		unsigned int used_planes = 0;
+
+		dev_dbg(rcdu->dev, "%s: finding free planes for group %u\n",
+			__func__, index);
+
+		for (i = 0; i < group->num_planes; ++i) {
+			struct rcar_du_plane *plane = &group->planes[i];
+			struct rcar_du_plane_state *new_plane_state;
+			struct drm_plane_state *s;
+
+			s = drm_atomic_get_plane_state(state, &plane->plane);
+			if (IS_ERR(s))
+				return PTR_ERR(s);
+
+			/*
+			 * If the plane has been freed in the above loop its
+			 * hardware planes must not be added to the used planes
+			 * bitmask. However, the current state doesn't reflect
+			 * the free state yet, as we've modified the new state
+			 * above. Use the local freed planes list to check for
+			 * that condition instead.
+			 */
+			if (group_freed_planes[index] & (1 << i)) {
+				dev_dbg(rcdu->dev,
+					"%s: plane (%u,%tu) has been freed, skipping\n",
+					__func__, plane->group->index,
+					plane - plane->group->planes);
+				continue;
+			}
+
+			new_plane_state = to_rcar_plane_state(s);
+			used_planes |= rcar_du_plane_hwmask(new_plane_state);
+
+			dev_dbg(rcdu->dev,
+				"%s: plane (%u,%tu) uses %u hwplanes (index %d)\n",
+				__func__, plane->group->index,
+				plane - plane->group->planes,
+				new_plane_state->format ?
+				new_plane_state->format->planes : 0,
+				new_plane_state->hwindex);
+		}
+
+		group_free_planes[index] = 0xff & ~used_planes;
+		groups &= ~(1 << index);
+
+		dev_dbg(rcdu->dev, "%s: group %u free planes mask 0x%02x\n",
+			__func__, index, group_free_planes[index]);
+	}
+
+	/* Reallocate hardware planes for each plane that needs it. */
+	for_each_oldnew_plane_in_state(state, drm_plane, old_drm_plane_state,
+				       new_drm_plane_state, i) {
+		struct rcar_du_plane_state *old_plane_state;
+		struct rcar_du_plane_state *new_plane_state;
+		struct rcar_du_plane *plane;
+		unsigned int crtc_planes;
+		unsigned int free;
+		int idx;
+
+		plane = to_rcar_plane(drm_plane);
+		old_plane_state = to_rcar_plane_state(old_drm_plane_state);
+		new_plane_state = to_rcar_plane_state(new_drm_plane_state);
+
+		dev_dbg(rcdu->dev, "%s: allocating plane (%u,%tu)\n", __func__,
+			plane->group->index, plane - plane->group->planes);
+
+		/*
+		 * Skip planes that are being disabled or don't need to be
+		 * reallocated.
+		 */
+		if (!new_plane_state->format ||
+		    !rcar_du_plane_needs_realloc(old_plane_state, new_plane_state))
+			continue;
+
+		/*
+		 * Try to allocate the plane from the free planes currently
+		 * associated with the target CRTC to avoid restarting the CRTC
+		 * group and thus minimize flicker. If it fails fall back to
+		 * allocating from all free planes.
+		 */
+		crtc_planes = to_rcar_crtc(new_plane_state->state.crtc)->index % 2
+			    ? plane->group->dptsr_planes
+			    : ~plane->group->dptsr_planes;
+		free = group_free_planes[plane->group->index];
+
+		idx = rcar_du_plane_hwalloc(plane, new_plane_state,
+					    free & crtc_planes);
+		if (idx < 0)
+			idx = rcar_du_plane_hwalloc(plane, new_plane_state,
+						    free);
+		if (idx < 0) {
+			dev_dbg(rcdu->dev, "%s: no available hardware plane\n",
+				__func__);
+			return idx;
+		}
+
+		dev_dbg(rcdu->dev, "%s: allocated %u hwplanes (index %u)\n",
+			__func__, new_plane_state->format->planes, idx);
+
+		new_plane_state->hwindex = idx;
+
+		group_free_planes[plane->group->index] &=
+			~rcar_du_plane_hwmask(new_plane_state);
+
+		dev_dbg(rcdu->dev, "%s: group %u free planes mask 0x%02x\n",
+			__func__, plane->group->index,
+			group_free_planes[plane->group->index]);
+	}
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * Plane Setup
+ */
+
+#define RCAR_DU_COLORKEY_NONE		(0 << 24)
+#define RCAR_DU_COLORKEY_SOURCE		(1 << 24)
+#define RCAR_DU_COLORKEY_MASK		(1 << 24)
+
+static void rcar_du_plane_write(struct rcar_du_group *rgrp,
+				unsigned int index, u32 reg, u32 data)
+{
+	rcar_du_write(rgrp->dev, rgrp->mmio_offset + index * PLANE_OFF + reg,
+		      data);
+}
+
+static void rcar_du_plane_setup_scanout(struct rcar_du_group *rgrp,
+					const struct rcar_du_plane_state *state)
+{
+	unsigned int src_x = state->state.src.x1 >> 16;
+	unsigned int src_y = state->state.src.y1 >> 16;
+	unsigned int index = state->hwindex;
+	unsigned int pitch;
+	bool interlaced;
+	u32 dma[2];
+
+	interlaced = state->state.crtc->state->adjusted_mode.flags
+		   & DRM_MODE_FLAG_INTERLACE;
+
+	if (state->source == RCAR_DU_PLANE_MEMORY) {
+		struct drm_framebuffer *fb = state->state.fb;
+		struct drm_gem_dma_object *gem;
+		unsigned int i;
+
+		if (state->format->planes == 2)
+			pitch = fb->pitches[0];
+		else
+			pitch = fb->pitches[0] * 8 / state->format->bpp;
+
+		for (i = 0; i < state->format->planes; ++i) {
+			gem = drm_fb_dma_get_gem_obj(fb, i);
+			dma[i] = gem->dma_addr + fb->offsets[i];
+		}
+	} else {
+		pitch = drm_rect_width(&state->state.src) >> 16;
+		dma[0] = 0;
+		dma[1] = 0;
+	}
+
+	/*
+	 * Memory pitch (expressed in pixels). Must be doubled for interlaced
+	 * operation with 32bpp formats.
+	 */
+	rcar_du_plane_write(rgrp, index, PnMWR,
+			    (interlaced && state->format->bpp == 32) ?
+			    pitch * 2 : pitch);
+
+	/*
+	 * The Y position is expressed in raster line units and must be doubled
+	 * for 32bpp formats, according to the R8A7790 datasheet. No mention of
+	 * doubling the Y position is found in the R8A7779 datasheet, but the
+	 * rule seems to apply there as well.
+	 *
+	 * Despite not being documented, doubling seem not to be needed when
+	 * operating in interlaced mode.
+	 *
+	 * Similarly, for the second plane, NV12 and NV21 formats seem to
+	 * require a halved Y position value, in both progressive and interlaced
+	 * modes.
+	 */
+	rcar_du_plane_write(rgrp, index, PnSPXR, src_x);
+	rcar_du_plane_write(rgrp, index, PnSPYR, src_y *
+			    (!interlaced && state->format->bpp == 32 ? 2 : 1));
+
+	rcar_du_plane_write(rgrp, index, PnDSA0R, dma[0]);
+
+	if (state->format->planes == 2) {
+		index = (index + 1) % 8;
+
+		rcar_du_plane_write(rgrp, index, PnMWR, pitch);
+
+		rcar_du_plane_write(rgrp, index, PnSPXR, src_x);
+		rcar_du_plane_write(rgrp, index, PnSPYR, src_y *
+				    (state->format->bpp == 16 ? 2 : 1) / 2);
+
+		rcar_du_plane_write(rgrp, index, PnDSA0R, dma[1]);
+	}
+}
+
+static void rcar_du_plane_setup_mode(struct rcar_du_group *rgrp,
+				     unsigned int index,
+				     const struct rcar_du_plane_state *state)
+{
+	u32 colorkey;
+	u32 pnmr;
+
+	/*
+	 * The PnALPHAR register controls alpha-blending in 16bpp formats
+	 * (ARGB1555 and XRGB1555).
+	 *
+	 * For ARGB, set the alpha value to 0, and enable alpha-blending when
+	 * the A bit is 0. This maps A=0 to alpha=0 and A=1 to alpha=255.
+	 *
+	 * For XRGB, set the alpha value to the plane-wide alpha value and
+	 * enable alpha-blending regardless of the X bit value.
+	 */
+	if (state->format->fourcc != DRM_FORMAT_XRGB1555)
+		rcar_du_plane_write(rgrp, index, PnALPHAR, PnALPHAR_ABIT_0);
+	else
+		rcar_du_plane_write(rgrp, index, PnALPHAR,
+				    PnALPHAR_ABIT_X | state->state.alpha >> 8);
+
+	pnmr = PnMR_BM_MD | state->format->pnmr;
+
+	/*
+	 * Disable color keying when requested. YUV formats have the
+	 * PnMR_SPIM_TP_OFF bit set in their pnmr field, disabling color keying
+	 * automatically.
+	 */
+	if ((state->colorkey & RCAR_DU_COLORKEY_MASK) == RCAR_DU_COLORKEY_NONE)
+		pnmr |= PnMR_SPIM_TP_OFF;
+
+	/* For packed YUV formats we need to select the U/V order. */
+	if (state->format->fourcc == DRM_FORMAT_YUYV)
+		pnmr |= PnMR_YCDF_YUYV;
+
+	rcar_du_plane_write(rgrp, index, PnMR, pnmr);
+
+	switch (state->format->fourcc) {
+	case DRM_FORMAT_RGB565:
+		colorkey = ((state->colorkey & 0xf80000) >> 8)
+			 | ((state->colorkey & 0x00fc00) >> 5)
+			 | ((state->colorkey & 0x0000f8) >> 3);
+		rcar_du_plane_write(rgrp, index, PnTC2R, colorkey);
+		break;
+
+	case DRM_FORMAT_ARGB1555:
+	case DRM_FORMAT_XRGB1555:
+		colorkey = ((state->colorkey & 0xf80000) >> 9)
+			 | ((state->colorkey & 0x00f800) >> 6)
+			 | ((state->colorkey & 0x0000f8) >> 3);
+		rcar_du_plane_write(rgrp, index, PnTC2R, colorkey);
+		break;
+
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_ARGB8888:
+		rcar_du_plane_write(rgrp, index, PnTC3R,
+				    PnTC3R_CODE | (state->colorkey & 0xffffff));
+		break;
+	}
+}
+
+static void rcar_du_plane_setup_format_gen2(struct rcar_du_group *rgrp,
+					    unsigned int index,
+					    const struct rcar_du_plane_state *state)
+{
+	u32 ddcr2 = PnDDCR2_CODE;
+	u32 ddcr4;
+
+	/*
+	 * Data format
+	 *
+	 * The data format is selected by the DDDF field in PnMR and the EDF
+	 * field in DDCR4.
+	 */
+
+	rcar_du_plane_setup_mode(rgrp, index, state);
+
+	if (state->format->planes == 2) {
+		if (state->hwindex != index) {
+			if (state->format->fourcc == DRM_FORMAT_NV12 ||
+			    state->format->fourcc == DRM_FORMAT_NV21)
+				ddcr2 |= PnDDCR2_Y420;
+
+			if (state->format->fourcc == DRM_FORMAT_NV21)
+				ddcr2 |= PnDDCR2_NV21;
+
+			ddcr2 |= PnDDCR2_DIVU;
+		} else {
+			ddcr2 |= PnDDCR2_DIVY;
+		}
+	}
+
+	rcar_du_plane_write(rgrp, index, PnDDCR2, ddcr2);
+
+	ddcr4 = state->format->edf | PnDDCR4_CODE;
+	if (state->source != RCAR_DU_PLANE_MEMORY)
+		ddcr4 |= PnDDCR4_VSPS;
+
+	rcar_du_plane_write(rgrp, index, PnDDCR4, ddcr4);
+}
+
+static void rcar_du_plane_setup_format_gen3(struct rcar_du_group *rgrp,
+					    unsigned int index,
+					    const struct rcar_du_plane_state *state)
+{
+	struct rcar_du_device *rcdu = rgrp->dev;
+	u32 pnmr = state->format->pnmr | PnMR_SPIM_TP_OFF;
+
+	if (rcdu->info->features & RCAR_DU_FEATURE_NO_BLENDING) {
+		/* No blending. ALP and EOR are not supported. */
+		pnmr &= ~(PnMR_SPIM_ALP | PnMR_SPIM_EOR);
+	}
+
+	rcar_du_plane_write(rgrp, index, PnMR, pnmr);
+
+	rcar_du_plane_write(rgrp, index, PnDDCR4,
+			    state->format->edf | PnDDCR4_CODE);
+
+	/*
+	 * On Gen3, some DU channels have two planes, each being wired to a
+	 * separate VSPD instance. The DU can then blend two planes. While
+	 * this feature isn't used by the driver, issues related to alpha
+	 * blending (such as incorrect colors or planes being invisible) may
+	 * still occur if the PnALPHAR register has a stale value. Set the
+	 * register to 0 to avoid this.
+	 */
+
+	rcar_du_plane_write(rgrp, index, PnALPHAR, 0);
+}
+
+static void rcar_du_plane_setup_format(struct rcar_du_group *rgrp,
+				       unsigned int index,
+				       const struct rcar_du_plane_state *state)
+{
+	struct rcar_du_device *rcdu = rgrp->dev;
+	const struct drm_rect *dst = &state->state.dst;
+
+	if (rcdu->info->gen < 3)
+		rcar_du_plane_setup_format_gen2(rgrp, index, state);
+	else
+		rcar_du_plane_setup_format_gen3(rgrp, index, state);
+
+	/* Destination position and size */
+	rcar_du_plane_write(rgrp, index, PnDSXR, drm_rect_width(dst));
+	rcar_du_plane_write(rgrp, index, PnDSYR, drm_rect_height(dst));
+	rcar_du_plane_write(rgrp, index, PnDPXR, dst->x1);
+	rcar_du_plane_write(rgrp, index, PnDPYR, dst->y1);
+
+	if (rcdu->info->gen < 3) {
+		/* Wrap-around and blinking, disabled */
+		rcar_du_plane_write(rgrp, index, PnWASPR, 0);
+		rcar_du_plane_write(rgrp, index, PnWAMWR, 4095);
+		rcar_du_plane_write(rgrp, index, PnBTR, 0);
+		rcar_du_plane_write(rgrp, index, PnMLR, 0);
+	}
+}
+
+void __rcar_du_plane_setup(struct rcar_du_group *rgrp,
+			   const struct rcar_du_plane_state *state)
+{
+	struct rcar_du_device *rcdu = rgrp->dev;
+
+	rcar_du_plane_setup_format(rgrp, state->hwindex, state);
+	if (state->format->planes == 2)
+		rcar_du_plane_setup_format(rgrp, (state->hwindex + 1) % 8,
+					   state);
+
+	if (rcdu->info->gen >= 3)
+		return;
+
+	rcar_du_plane_setup_scanout(rgrp, state);
+
+	if (state->source == RCAR_DU_PLANE_VSPD1) {
+		unsigned int vspd1_sink = rgrp->index ? 2 : 0;
+
+		if (rcdu->vspd1_sink != vspd1_sink) {
+			rcdu->vspd1_sink = vspd1_sink;
+			rcar_du_set_dpad0_vsp1_routing(rcdu);
+
+			/*
+			 * Changes to the VSP1 sink take effect on DRES and thus
+			 * need a restart of the group.
+			 */
+			rgrp->need_restart = true;
+		}
+	}
+}
+
+int __rcar_du_plane_atomic_check(struct drm_plane *plane,
+				 struct drm_plane_state *state,
+				 const struct rcar_du_format_info **format)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_crtc_state *crtc_state;
+	int ret;
+
+	if (!state->crtc) {
+		/*
+		 * The visible field is not reset by the DRM core but only
+		 * updated by drm_atomic_helper_check_plane_state(), set it
+		 * manually.
+		 */
+		state->visible = false;
+		*format = NULL;
+		return 0;
+	}
+
+	crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
+	if (IS_ERR(crtc_state))
+		return PTR_ERR(crtc_state);
+
+	ret = drm_atomic_helper_check_plane_state(state, crtc_state,
+						  DRM_PLANE_NO_SCALING,
+						  DRM_PLANE_NO_SCALING,
+						  true, true);
+	if (ret < 0)
+		return ret;
+
+	if (!state->visible) {
+		*format = NULL;
+		return 0;
+	}
+
+	*format = rcar_du_format_info(state->fb->format->format);
+	if (*format == NULL) {
+		dev_dbg(dev->dev, "%s: unsupported format %p4cc\n", __func__,
+			&state->fb->format->format);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rcar_du_plane_atomic_check(struct drm_plane *plane,
+				      struct drm_atomic_commit *state)
+{
+	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
+										 plane);
+	struct rcar_du_plane_state *rstate = to_rcar_plane_state(new_plane_state);
+
+	return __rcar_du_plane_atomic_check(plane, new_plane_state,
+					    &rstate->format);
+}
+
+static void rcar_du_plane_atomic_update(struct drm_plane *plane,
+					struct drm_atomic_commit *state)
+{
+	struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state, plane);
+	struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
+	struct rcar_du_plane *rplane = to_rcar_plane(plane);
+	struct rcar_du_plane_state *old_rstate;
+	struct rcar_du_plane_state *new_rstate;
+
+	if (!new_state->visible)
+		return;
+
+	rcar_du_plane_setup(rplane);
+
+	/*
+	 * Check whether the source has changed from memory to live source or
+	 * from live source to memory. The source has been configured by the
+	 * VSPS bit in the PnDDCR4 register. Although the datasheet states that
+	 * the bit is updated during vertical blanking, it seems that updates
+	 * only occur when the DU group is held in reset through the DSYSR.DRES
+	 * bit. We thus need to restart the group if the source changes.
+	 */
+	old_rstate = to_rcar_plane_state(old_state);
+	new_rstate = to_rcar_plane_state(new_state);
+
+	if ((old_rstate->source == RCAR_DU_PLANE_MEMORY) !=
+	    (new_rstate->source == RCAR_DU_PLANE_MEMORY))
+		rplane->group->need_restart = true;
+}
+
+static const struct drm_plane_helper_funcs rcar_du_plane_helper_funcs = {
+	.atomic_check = rcar_du_plane_atomic_check,
+	.atomic_update = rcar_du_plane_atomic_update,
+};
+
+static const struct drm_plane_helper_funcs rcar_du_primary_plane_helper_funcs = {
+	.atomic_check = rcar_du_plane_atomic_check,
+	.atomic_update = rcar_du_plane_atomic_update,
+	.get_scanout_buffer = drm_fb_dma_get_scanout_buffer,
+};
+
+static struct drm_plane_state *
+rcar_du_plane_atomic_duplicate_state(struct drm_plane *plane)
+{
+	struct rcar_du_plane_state *state;
+	struct rcar_du_plane_state *copy;
+
+	if (WARN_ON(!plane->state))
+		return NULL;
+
+	state = to_rcar_plane_state(plane->state);
+	copy = kmemdup(state, sizeof(*state), GFP_KERNEL);
+	if (copy == NULL)
+		return NULL;
+
+	__drm_atomic_helper_plane_duplicate_state(plane, &copy->state);
+
+	return &copy->state;
+}
+
+static void rcar_du_plane_atomic_destroy_state(struct drm_plane *plane,
+					       struct drm_plane_state *state)
+{
+	__drm_atomic_helper_plane_destroy_state(state);
+	kfree(to_rcar_plane_state(state));
+}
+
+static void rcar_du_plane_reset(struct drm_plane *plane)
+{
+	struct rcar_du_plane_state *state;
+
+	if (plane->state) {
+		rcar_du_plane_atomic_destroy_state(plane, plane->state);
+		plane->state = NULL;
+	}
+
+	state = kzalloc_obj(*state);
+	if (state == NULL)
+		return;
+
+	__drm_atomic_helper_plane_reset(plane, &state->state);
+
+	state->hwindex = -1;
+	state->source = RCAR_DU_PLANE_MEMORY;
+	state->colorkey = RCAR_DU_COLORKEY_NONE;
+}
+
+static int rcar_du_plane_atomic_set_property(struct drm_plane *plane,
+					     struct drm_plane_state *state,
+					     struct drm_property *property,
+					     uint64_t val)
+{
+	struct rcar_du_plane_state *rstate = to_rcar_plane_state(state);
+	struct rcar_du_device *rcdu = to_rcar_plane(plane)->group->dev;
+
+	if (property == rcdu->props.colorkey)
+		rstate->colorkey = val;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int rcar_du_plane_atomic_get_property(struct drm_plane *plane,
+	const struct drm_plane_state *state, struct drm_property *property,
+	uint64_t *val)
+{
+	const struct rcar_du_plane_state *rstate =
+		container_of(state, const struct rcar_du_plane_state, state);
+	struct rcar_du_device *rcdu = to_rcar_plane(plane)->group->dev;
+
+	if (property == rcdu->props.colorkey)
+		*val = rstate->colorkey;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct drm_plane_funcs rcar_du_plane_funcs = {
+	.update_plane = drm_atomic_helper_update_plane,
+	.disable_plane = drm_atomic_helper_disable_plane,
+	.reset = rcar_du_plane_reset,
+	.destroy = drm_plane_cleanup,
+	.atomic_duplicate_state = rcar_du_plane_atomic_duplicate_state,
+	.atomic_destroy_state = rcar_du_plane_atomic_destroy_state,
+	.atomic_set_property = rcar_du_plane_atomic_set_property,
+	.atomic_get_property = rcar_du_plane_atomic_get_property,
+};
+
+static const uint32_t formats[] = {
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_ARGB1555,
+	DRM_FORMAT_XRGB1555,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV21,
+	DRM_FORMAT_NV16,
+};
+
+int rcar_du_planes_init(struct rcar_du_group *rgrp)
+{
+	struct rcar_du_device *rcdu = rgrp->dev;
+	unsigned int crtcs;
+	unsigned int i;
+	int ret;
+
+	 /*
+	  * Create one primary plane per CRTC in this group and seven overlay
+	  * planes.
+	  */
+	rgrp->num_planes = rgrp->num_crtcs + 7;
+
+	crtcs = ((1 << rcdu->num_crtcs) - 1) & (3 << (2 * rgrp->index));
+
+	for (i = 0; i < rgrp->num_planes; ++i) {
+		enum drm_plane_type type = i < rgrp->num_crtcs
+					 ? DRM_PLANE_TYPE_PRIMARY
+					 : DRM_PLANE_TYPE_OVERLAY;
+		struct rcar_du_plane *plane = &rgrp->planes[i];
+
+		plane->group = rgrp;
+
+		ret = drm_universal_plane_init(&rcdu->ddev, &plane->plane,
+					       crtcs, &rcar_du_plane_funcs,
+					       formats, ARRAY_SIZE(formats),
+					       NULL, type, NULL);
+		if (ret < 0)
+			return ret;
+
+		if (type == DRM_PLANE_TYPE_PRIMARY)
+			drm_plane_helper_add(&plane->plane,
+					     &rcar_du_primary_plane_helper_funcs);
+		else
+			drm_plane_helper_add(&plane->plane,
+					     &rcar_du_plane_helper_funcs);
+
+		drm_plane_create_alpha_property(&plane->plane);
+
+		if (type == DRM_PLANE_TYPE_PRIMARY) {
+			drm_plane_create_zpos_immutable_property(&plane->plane,
+								 0);
+		} else {
+			drm_object_attach_property(&plane->plane.base,
+						   rcdu->props.colorkey,
+						   RCAR_DU_COLORKEY_NONE);
+			drm_plane_create_zpos_property(&plane->plane, 1, 1, 7);
+		}
+	}
+
+	return 0;
+}

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_plane.h

@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * R-Car Display Unit Planes
+ *
+ * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#ifndef __RCAR_DU_PLANE_H__
+#define __RCAR_DU_PLANE_H__
+
+#include <drm/drm_plane.h>
+
+struct rcar_du_format_info;
+struct rcar_du_group;
+
+/*
+ * The R-Car DU has 8 hardware planes, shared between primary and overlay planes.
+ * As using overlay planes requires at least one of the CRTCs being enabled, no
+ * more than 7 overlay planes can be available. We thus create 1 primary plane
+ * per CRTC and 7 overlay planes, for a total of up to 9 KMS planes.
+ */
+#define RCAR_DU_NUM_KMS_PLANES		9
+#define RCAR_DU_NUM_HW_PLANES		8
+
+enum rcar_du_plane_source {
+	RCAR_DU_PLANE_MEMORY,
+	RCAR_DU_PLANE_VSPD0,
+	RCAR_DU_PLANE_VSPD1,
+};
+
+struct rcar_du_plane {
+	struct drm_plane plane;
+	struct rcar_du_group *group;
+};
+
+static inline struct rcar_du_plane *to_rcar_plane(struct drm_plane *plane)
+{
+	return container_of(plane, struct rcar_du_plane, plane);
+}
+
+/**
+ * struct rcar_du_plane_state - Driver-specific plane state
+ * @state: base DRM plane state
+ * @format: information about the pixel format used by the plane
+ * @hwindex: 0-based hardware plane index, -1 means unused
+ * @colorkey: value of the plane colorkey property
+ */
+struct rcar_du_plane_state {
+	struct drm_plane_state state;
+
+	const struct rcar_du_format_info *format;
+	int hwindex;
+	enum rcar_du_plane_source source;
+
+	unsigned int colorkey;
+};
+
+static inline struct rcar_du_plane_state *
+to_rcar_plane_state(struct drm_plane_state *state)
+{
+	return container_of(state, struct rcar_du_plane_state, state);
+}
+
+int rcar_du_atomic_check_planes(struct drm_device *dev,
+				struct drm_atomic_commit *state);
+
+int __rcar_du_plane_atomic_check(struct drm_plane *plane,
+				 struct drm_plane_state *state,
+				 const struct rcar_du_format_info **format);
+
+int rcar_du_planes_init(struct rcar_du_group *rgrp);
+
+void __rcar_du_plane_setup(struct rcar_du_group *rgrp,
+			   const struct rcar_du_plane_state *state);
+
+static inline void rcar_du_plane_setup(struct rcar_du_plane *plane)
+{
+	struct rcar_du_plane_state *state =
+		to_rcar_plane_state(plane->plane.state);
+
+	return __rcar_du_plane_setup(plane->group, state);
+}
+
+#endif /* __RCAR_DU_PLANE_H__ */

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_regs.h

@@ -0,0 +1,553 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * R-Car Display Unit Registers Definitions
+ *
+ * Copyright (C) 2013-2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#ifndef __RCAR_DU_REGS_H__
+#define __RCAR_DU_REGS_H__
+
+#define DU0_REG_OFFSET		0x00000
+#define DU1_REG_OFFSET		0x30000
+#define DU2_REG_OFFSET		0x40000
+#define DU3_REG_OFFSET		0x70000
+
+/* -----------------------------------------------------------------------------
+ * Display Control Registers
+ */
+
+#define DSYSR			0x00000	/* display 1 */
+#define DSYSR_ILTS		(1 << 29)
+#define DSYSR_DSEC		(1 << 20)
+#define DSYSR_IUPD		(1 << 16)
+#define DSYSR_DRES		(1 << 9)
+#define DSYSR_DEN		(1 << 8)
+#define DSYSR_TVM_MASTER	(0 << 6)
+#define DSYSR_TVM_SWITCH	(1 << 6)
+#define DSYSR_TVM_TVSYNC	(2 << 6)
+#define DSYSR_TVM_MASK		(3 << 6)
+#define DSYSR_SCM_INT_NONE	(0 << 4)
+#define DSYSR_SCM_INT_SYNC	(2 << 4)
+#define DSYSR_SCM_INT_VIDEO	(3 << 4)
+#define DSYSR_SCM_MASK		(3 << 4)
+
+#define DSMR			0x00004
+#define DSMR_VSPM		(1 << 28)
+#define DSMR_ODPM		(1 << 27)
+#define DSMR_DIPM_DISP		(0 << 25)
+#define DSMR_DIPM_CSYNC		(1 << 25)
+#define DSMR_DIPM_DE		(3 << 25)
+#define DSMR_DIPM_MASK		(3 << 25)
+#define DSMR_CSPM		(1 << 24)
+#define DSMR_DIL		(1 << 19)
+#define DSMR_VSL		(1 << 18)
+#define DSMR_HSL		(1 << 17)
+#define DSMR_DDIS		(1 << 16)
+#define DSMR_CDEL		(1 << 15)
+#define DSMR_CDEM_CDE		(0 << 13)
+#define DSMR_CDEM_LOW		(2 << 13)
+#define DSMR_CDEM_HIGH		(3 << 13)
+#define DSMR_CDEM_MASK		(3 << 13)
+#define DSMR_CDED		(1 << 12)
+#define DSMR_ODEV		(1 << 8)
+#define DSMR_CSY_VH_OR		(0 << 6)
+#define DSMR_CSY_333		(2 << 6)
+#define DSMR_CSY_222		(3 << 6)
+#define DSMR_CSY_MASK		(3 << 6)
+
+#define DSSR			0x00008
+#define DSSR_VC1FB_DSA0		(0 << 30)
+#define DSSR_VC1FB_DSA1		(1 << 30)
+#define DSSR_VC1FB_DSA2		(2 << 30)
+#define DSSR_VC1FB_INIT		(3 << 30)
+#define DSSR_VC1FB_MASK		(3 << 30)
+#define DSSR_VC0FB_DSA0		(0 << 28)
+#define DSSR_VC0FB_DSA1		(1 << 28)
+#define DSSR_VC0FB_DSA2		(2 << 28)
+#define DSSR_VC0FB_INIT		(3 << 28)
+#define DSSR_VC0FB_MASK		(3 << 28)
+#define DSSR_DFB(n)		(1 << ((n)+15))
+#define DSSR_TVR		(1 << 15)
+#define DSSR_FRM		(1 << 14)
+#define DSSR_VBK		(1 << 11)
+#define DSSR_RINT		(1 << 9)
+#define DSSR_HBK		(1 << 8)
+#define DSSR_ADC(n)		(1 << ((n)-1))
+
+#define DSRCR			0x0000c
+#define DSRCR_TVCL		(1 << 15)
+#define DSRCR_FRCL		(1 << 14)
+#define DSRCR_VBCL		(1 << 11)
+#define DSRCR_RICL		(1 << 9)
+#define DSRCR_HBCL		(1 << 8)
+#define DSRCR_ADCL(n)		(1 << ((n)-1))
+#define DSRCR_MASK		0x0000cbff
+
+#define DIER			0x00010
+#define DIER_TVE		(1 << 15)
+#define DIER_FRE		(1 << 14)
+#define DIER_VBE		(1 << 11)
+#define DIER_RIE		(1 << 9)
+#define DIER_HBE		(1 << 8)
+#define DIER_ADCE(n)		(1 << ((n)-1))
+
+#define CPCR			0x00014
+#define CPCR_CP4CE		(1 << 19)
+#define CPCR_CP3CE		(1 << 18)
+#define CPCR_CP2CE		(1 << 17)
+#define CPCR_CP1CE		(1 << 16)
+
+#define DPPR			0x00018
+#define DPPR_DPE(n)		(1 << ((n)*4-1))
+#define DPPR_DPS(n, p)		(((p)-1) << DPPR_DPS_SHIFT(n))
+#define DPPR_DPS_SHIFT(n)	(((n)-1)*4)
+#define DPPR_BPP16		(DPPR_DPE(8) | DPPR_DPS(8, 1))	/* plane1 */
+#define DPPR_BPP32_P1		(DPPR_DPE(7) | DPPR_DPS(7, 1))
+#define DPPR_BPP32_P2		(DPPR_DPE(8) | DPPR_DPS(8, 2))
+#define DPPR_BPP32		(DPPR_BPP32_P1 | DPPR_BPP32_P2)	/* plane1 & 2 */
+
+#define DEFR			0x00020
+#define DEFR_CODE		(0x7773 << 16)
+#define DEFR_EXSL		(1 << 12)
+#define DEFR_EXVL		(1 << 11)
+#define DEFR_EXUP		(1 << 5)
+#define DEFR_VCUP		(1 << 4)
+#define DEFR_DEFE		(1 << 0)
+
+#define DAPCR			0x00024
+#define DAPCR_CODE		(0x7773 << 16)
+#define DAPCR_AP2E		(1 << 4)
+#define DAPCR_AP1E		(1 << 0)
+
+#define DCPCR			0x00028
+#define DCPCR_CODE		(0x7773 << 16)
+#define DCPCR_CA2B		(1 << 13)
+#define DCPCR_CD2F		(1 << 12)
+#define DCPCR_DC2E		(1 << 8)
+#define DCPCR_CAB		(1 << 5)
+#define DCPCR_CDF		(1 << 4)
+#define DCPCR_DCE		(1 << 0)
+
+#define DEFR2			0x00034
+#define DEFR2_CODE		(0x7775 << 16)
+#define DEFR2_DEFE2G		(1 << 0)
+
+#define DEFR3			0x00038
+#define DEFR3_CODE		(0x7776 << 16)
+#define DEFR3_EVDA		(1 << 14)
+#define DEFR3_EVDM_1		(1 << 12)
+#define DEFR3_EVDM_2		(2 << 12)
+#define DEFR3_EVDM_3		(3 << 12)
+#define DEFR3_VMSM2_EMA		(1 << 6)
+#define DEFR3_VMSM1_ENA		(1 << 4)
+#define DEFR3_DEFE3		(1 << 0)
+
+#define DEFR4			0x0003c
+#define DEFR4_CODE		(0x7777 << 16)
+#define DEFR4_LRUO		(1 << 5)
+#define DEFR4_SPCE		(1 << 4)
+
+#define DVCSR			0x000d0
+#define DVCSR_VCnFB2_DSA0(n)	(0 << ((n)*2+16))
+#define DVCSR_VCnFB2_DSA1(n)	(1 << ((n)*2+16))
+#define DVCSR_VCnFB2_DSA2(n)	(2 << ((n)*2+16))
+#define DVCSR_VCnFB2_INIT(n)	(3 << ((n)*2+16))
+#define DVCSR_VCnFB2_MASK(n)	(3 << ((n)*2+16))
+#define DVCSR_VCnFB_DSA0(n)	(0 << ((n)*2))
+#define DVCSR_VCnFB_DSA1(n)	(1 << ((n)*2))
+#define DVCSR_VCnFB_DSA2(n)	(2 << ((n)*2))
+#define DVCSR_VCnFB_INIT(n)	(3 << ((n)*2))
+#define DVCSR_VCnFB_MASK(n)	(3 << ((n)*2))
+
+#define DEFR5			0x000e0
+#define DEFR5_CODE		(0x66 << 24)
+#define DEFR5_YCRGB2_DIS	(0 << 14)
+#define DEFR5_YCRGB2_PRI1	(1 << 14)
+#define DEFR5_YCRGB2_PRI2	(2 << 14)
+#define DEFR5_YCRGB2_PRI3	(3 << 14)
+#define DEFR5_YCRGB2_MASK	(3 << 14)
+#define DEFR5_YCRGB1_DIS	(0 << 12)
+#define DEFR5_YCRGB1_PRI1	(1 << 12)
+#define DEFR5_YCRGB1_PRI2	(2 << 12)
+#define DEFR5_YCRGB1_PRI3	(3 << 12)
+#define DEFR5_YCRGB1_MASK	(3 << 12)
+#define DEFR5_DEFE5		(1 << 0)
+
+#define DDLTR			0x000e4
+#define DDLTR_CODE		(0x7766 << 16)
+#define DDLTR_DLAR2		(1 << 6)
+#define DDLTR_DLAY2		(1 << 5)
+#define DDLTR_DLAY1		(1 << 1)
+
+#define DEFR6			0x000e8
+#define DEFR6_CODE		(0x7778 << 16)
+#define DEFR6_ODPM12_DSMR	(0 << 10)
+#define DEFR6_ODPM12_DISP	(2 << 10)
+#define DEFR6_ODPM12_CDE	(3 << 10)
+#define DEFR6_ODPM12_MASK	(3 << 10)
+#define DEFR6_ODPM02_DSMR	(0 << 8)
+#define DEFR6_ODPM02_DISP	(2 << 8)
+#define DEFR6_ODPM02_CDE	(3 << 8)
+#define DEFR6_ODPM02_MASK	(3 << 8)
+#define DEFR6_TCNE1		(1 << 6)
+#define DEFR6_TCNE0		(1 << 4)
+#define DEFR6_MLOS1		(1 << 2)
+#define DEFR6_DEFAULT		(DEFR6_CODE | DEFR6_TCNE1)
+
+#define DEFR7			0x000ec
+#define DEFR7_CODE		(0x7779 << 16)
+#define DEFR7_CMME1		BIT(6)
+#define DEFR7_CMME0		BIT(4)
+
+/* -----------------------------------------------------------------------------
+ * R8A7790-only Control Registers
+ */
+
+#define DD1SSR			0x20008
+#define DD1SSR_TVR		(1 << 15)
+#define DD1SSR_FRM		(1 << 14)
+#define DD1SSR_BUF		(1 << 12)
+#define DD1SSR_VBK		(1 << 11)
+#define DD1SSR_RINT		(1 << 9)
+#define DD1SSR_HBK		(1 << 8)
+#define DD1SSR_ADC(n)		(1 << ((n)-1))
+
+#define DD1SRCR			0x2000c
+#define DD1SRCR_TVR		(1 << 15)
+#define DD1SRCR_FRM		(1 << 14)
+#define DD1SRCR_BUF		(1 << 12)
+#define DD1SRCR_VBK		(1 << 11)
+#define DD1SRCR_RINT		(1 << 9)
+#define DD1SRCR_HBK		(1 << 8)
+#define DD1SRCR_ADC(n)		(1 << ((n)-1))
+
+#define DD1IER			0x20010
+#define DD1IER_TVR		(1 << 15)
+#define DD1IER_FRM		(1 << 14)
+#define DD1IER_BUF		(1 << 12)
+#define DD1IER_VBK		(1 << 11)
+#define DD1IER_RINT		(1 << 9)
+#define DD1IER_HBK		(1 << 8)
+#define DD1IER_ADC(n)		(1 << ((n)-1))
+
+#define DEFR8			0x20020
+#define DEFR8_CODE		(0x7790 << 16)
+#define DEFR8_VSCS		(1 << 6)
+#define DEFR8_DRGBS_DU(n)	((n) << 4)
+#define DEFR8_DRGBS_MASK	(3 << 4)
+#define DEFR8_DEFE8		(1 << 0)
+
+#define DOFLR			0x20024
+#define DOFLR_CODE		(0x7790 << 16)
+#define DOFLR_HSYCFL1		(1 << 13)
+#define DOFLR_VSYCFL1		(1 << 12)
+#define DOFLR_ODDFL1		(1 << 11)
+#define DOFLR_DISPFL1		(1 << 10)
+#define DOFLR_CDEFL1		(1 << 9)
+#define DOFLR_RGBFL1		(1 << 8)
+#define DOFLR_HSYCFL0		(1 << 5)
+#define DOFLR_VSYCFL0		(1 << 4)
+#define DOFLR_ODDFL0		(1 << 3)
+#define DOFLR_DISPFL0		(1 << 2)
+#define DOFLR_CDEFL0		(1 << 1)
+#define DOFLR_RGBFL0		(1 << 0)
+
+#define DIDSR			0x20028
+#define DIDSR_CODE		(0x7790 << 16)
+#define DIDSR_LDCS_DCLKIN(n)	(0 << (8 + (n) * 2))
+#define DIDSR_LDCS_DSI(n)	(2 << (8 + (n) * 2))	/* V3U only */
+#define DIDSR_LDCS_LVDS0(n)	(2 << (8 + (n) * 2))
+#define DIDSR_LDCS_LVDS1(n)	(3 << (8 + (n) * 2))
+#define DIDSR_LDCS_MASK(n)	(3 << (8 + (n) * 2))
+#define DIDSR_PDCS_CLK(n, clk)	(clk << ((n) * 2))
+#define DIDSR_PDCS_MASK(n)	(3 << ((n) * 2))
+
+#define DEFR10			0x20038
+#define DEFR10_CODE		(0x7795 << 16)
+#define DEFR10_VSPF1_RGB	(0 << 14)
+#define DEFR10_VSPF1_YC		(1 << 14)
+#define DEFR10_DOCF1_RGB	(0 << 12)
+#define DEFR10_DOCF1_YC		(1 << 12)
+#define DEFR10_YCDF0_YCBCR444	(0 << 11)
+#define DEFR10_YCDF0_YCBCR422	(1 << 11)
+#define DEFR10_VSPF0_RGB	(0 << 10)
+#define DEFR10_VSPF0_YC		(1 << 10)
+#define DEFR10_DOCF0_RGB	(0 << 8)
+#define DEFR10_DOCF0_YC		(1 << 8)
+#define DEFR10_TSEL_H3_TCON1	(0 << 1) /* DEFR102 register only (DU2/DU3) */
+#define DEFR10_DEFE10		(1 << 0)
+
+#define DPLLCR			0x20044
+#define DPLLCR_CODE		(0x95 << 24)
+#define DPLLCR_PLCS1		(1 << 23)
+#define DPLLCR_PLCS0		(1 << 21)
+#define DPLLCR_CLKE		(1 << 18)
+#define DPLLCR_FDPLL(n)		((n) << 12)
+#define DPLLCR_N(n)		((n) << 5)
+#define DPLLCR_M(n)		((n) << 3)
+#define DPLLCR_STBY		(1 << 2)
+#define DPLLCR_INCS_DOTCLKIN0	(0 << 0)
+#define DPLLCR_INCS_DOTCLKIN1	(1 << 1)
+
+#define DPLLC2R			0x20048
+#define DPLLC2R_CODE		(0x95 << 24)
+#define DPLLC2R_SELC		(1 << 12)
+#define DPLLC2R_M(n)		((n) << 8)
+#define DPLLC2R_FDPLL(n)	((n) << 0)
+
+/* -----------------------------------------------------------------------------
+ * Display Timing Generation Registers
+ */
+
+#define HDSR			0x00040
+#define HDER			0x00044
+#define VDSR			0x00048
+#define VDER			0x0004c
+#define HCR			0x00050
+#define HSWR			0x00054
+#define VCR			0x00058
+#define VSPR			0x0005c
+#define EQWR			0x00060
+#define SPWR			0x00064
+#define CLAMPSR			0x00070
+#define CLAMPWR			0x00074
+#define DESR			0x00078
+#define DEWR			0x0007c
+
+/* -----------------------------------------------------------------------------
+ * Display Attribute Registers
+ */
+
+#define CP1TR			0x00080
+#define CP2TR			0x00084
+#define CP3TR			0x00088
+#define CP4TR			0x0008c
+
+#define DOOR			0x00090
+#define DOOR_RGB(r, g, b)	(((r) << 18) | ((g) << 10) | ((b) << 2))
+#define CDER			0x00094
+#define CDER_RGB(r, g, b)	(((r) << 18) | ((g) << 10) | ((b) << 2))
+#define BPOR			0x00098
+#define BPOR_RGB(r, g, b)	(((r) << 18) | ((g) << 10) | ((b) << 2))
+
+#define RINTOFSR		0x0009c
+
+#define DSHPR			0x000c8
+#define DSHPR_CODE		(0x7776 << 16)
+#define DSHPR_PRIH		(0xa << 4)
+#define DSHPR_PRIL_BPP16	(0x8 << 0)
+#define DSHPR_PRIL_BPP32	(0x9 << 0)
+
+/* -----------------------------------------------------------------------------
+ * Display Plane Registers
+ */
+
+#define PLANE_OFF		0x00100
+
+#define PnMR			0x00100 /* plane 1 */
+#define PnMR_VISL_VIN0		(0 << 26)	/* use Video Input 0 */
+#define PnMR_VISL_VIN1		(1 << 26)	/* use Video Input 1 */
+#define PnMR_VISL_VIN2		(2 << 26)	/* use Video Input 2 */
+#define PnMR_VISL_VIN3		(3 << 26)	/* use Video Input 3 */
+#define PnMR_YCDF_YUYV		(1 << 20)	/* YUYV format */
+#define PnMR_TC_R		(0 << 17)	/* Tranparent color is PnTC1R */
+#define PnMR_TC_CP		(1 << 17)	/* Tranparent color is color palette */
+#define PnMR_WAE		(1 << 16)	/* Wrap around Enable */
+#define PnMR_SPIM_TP		(0 << 12)	/* Transparent Color */
+#define PnMR_SPIM_ALP		(1 << 12)	/* Alpha Blending */
+#define PnMR_SPIM_EOR		(2 << 12)	/* EOR */
+#define PnMR_SPIM_TP_OFF	(1 << 14)	/* No Transparent Color */
+#define PnMR_CPSL_CP1		(0 << 8)	/* Color Palette selected 1 */
+#define PnMR_CPSL_CP2		(1 << 8)	/* Color Palette selected 2 */
+#define PnMR_CPSL_CP3		(2 << 8)	/* Color Palette selected 3 */
+#define PnMR_CPSL_CP4		(3 << 8)	/* Color Palette selected 4 */
+#define PnMR_DC			(1 << 7)	/* Display Area Change */
+#define PnMR_BM_MD		(0 << 4)	/* Manual Display Change Mode */
+#define PnMR_BM_AR		(1 << 4)	/* Auto Rendering Mode */
+#define PnMR_BM_AD		(2 << 4)	/* Auto Display Change Mode */
+#define PnMR_BM_VC		(3 << 4)	/* Video Capture Mode */
+#define PnMR_DDDF_8BPP		(0 << 0)	/* 8bit */
+#define PnMR_DDDF_16BPP		(1 << 0)	/* 16bit or 32bit */
+#define PnMR_DDDF_ARGB		(2 << 0)	/* ARGB */
+#define PnMR_DDDF_YC		(3 << 0)	/* YC */
+#define PnMR_DDDF_MASK		(3 << 0)
+
+#define PnMWR			0x00104
+
+#define PnALPHAR		0x00108
+#define PnALPHAR_ABIT_1		(0 << 12)
+#define PnALPHAR_ABIT_0		(1 << 12)
+#define PnALPHAR_ABIT_X		(2 << 12)
+
+#define PnDSXR			0x00110
+#define PnDSYR			0x00114
+#define PnDPXR			0x00118
+#define PnDPYR			0x0011c
+
+#define PnDSA0R			0x00120
+#define PnDSA1R			0x00124
+#define PnDSA2R			0x00128
+#define PnDSA_MASK		0xfffffff0
+
+#define PnSPXR			0x00130
+#define PnSPYR			0x00134
+#define PnWASPR			0x00138
+#define PnWAMWR			0x0013c
+
+#define PnBTR			0x00140
+
+#define PnTC1R			0x00144
+#define PnTC2R			0x00148
+#define PnTC3R			0x0014c
+#define PnTC3R_CODE		(0x66 << 24)
+
+#define PnMLR			0x00150
+
+#define PnSWAPR			0x00180
+#define PnSWAPR_DIGN		(1 << 4)
+#define PnSWAPR_SPQW		(1 << 3)
+#define PnSWAPR_SPLW		(1 << 2)
+#define PnSWAPR_SPWD		(1 << 1)
+#define PnSWAPR_SPBY		(1 << 0)
+
+#define PnDDCR			0x00184
+#define PnDDCR_CODE		(0x7775 << 16)
+#define PnDDCR_LRGB1		(1 << 11)
+#define PnDDCR_LRGB0		(1 << 10)
+
+#define PnDDCR2			0x00188
+#define PnDDCR2_CODE		(0x7776 << 16)
+#define PnDDCR2_NV21		(1 << 5)
+#define PnDDCR2_Y420		(1 << 4)
+#define PnDDCR2_DIVU		(1 << 1)
+#define PnDDCR2_DIVY		(1 << 0)
+
+#define PnDDCR4			0x00190
+#define PnDDCR4_CODE		(0x7766 << 16)
+#define PnDDCR4_VSPS		(1 << 13)
+#define PnDDCR4_SDFS_RGB	(0 << 4)
+#define PnDDCR4_SDFS_YC		(5 << 4)
+#define PnDDCR4_SDFS_MASK	(7 << 4)
+#define PnDDCR4_EDF_NONE	(0 << 0)
+#define PnDDCR4_EDF_ARGB8888	(1 << 0)
+#define PnDDCR4_EDF_RGB888	(2 << 0)
+#define PnDDCR4_EDF_RGB666	(3 << 0)
+#define PnDDCR4_EDF_MASK	(7 << 0)
+
+#define APnMR			0x0a100
+#define APnMR_WAE		(1 << 16)	/* Wrap around Enable */
+#define APnMR_DC		(1 << 7)	/* Display Area Change */
+#define APnMR_BM_MD		(0 << 4)	/* Manual Display Change Mode */
+#define APnMR_BM_AD		(2 << 4)	/* Auto Display Change Mode */
+
+#define APnMWR			0x0a104
+
+#define APnDSXR			0x0a110
+#define APnDSYR			0x0a114
+#define APnDPXR			0x0a118
+#define APnDPYR			0x0a11c
+
+#define APnDSA0R		0x0a120
+#define APnDSA1R		0x0a124
+#define APnDSA2R		0x0a128
+
+#define APnSPXR			0x0a130
+#define APnSPYR			0x0a134
+#define APnWASPR		0x0a138
+#define APnWAMWR		0x0a13c
+
+#define APnBTR			0x0a140
+
+#define APnMLR			0x0a150
+#define APnSWAPR		0x0a180
+
+/* -----------------------------------------------------------------------------
+ * Display Capture Registers
+ */
+
+#define DCMR			0x0c100
+#define DCMWR			0x0c104
+#define DCSAR			0x0c120
+#define DCMLR			0x0c150
+
+/* -----------------------------------------------------------------------------
+ * Color Palette Registers
+ */
+
+#define CP1_000R		0x01000
+#define CP1_255R		0x013fc
+#define CP2_000R		0x02000
+#define CP2_255R		0x023fc
+#define CP3_000R		0x03000
+#define CP3_255R		0x033fc
+#define CP4_000R		0x04000
+#define CP4_255R		0x043fc
+
+/* -----------------------------------------------------------------------------
+ * External Synchronization Control Registers
+ */
+
+#define ESCR02			0x10000
+#define ESCR13			0x01000
+#define ESCR_DCLKOINV		(1 << 25)
+#define ESCR_DCLKSEL_DCLKIN	(0 << 20)
+#define ESCR_DCLKSEL_CLKS	(1 << 20)
+#define ESCR_DCLKSEL_MASK	(1 << 20)
+#define ESCR_DCLKDIS		(1 << 16)
+#define ESCR_SYNCSEL_OFF	(0 << 8)
+#define ESCR_SYNCSEL_EXVSYNC	(2 << 8)
+#define ESCR_SYNCSEL_EXHSYNC	(3 << 8)
+#define ESCR_FRQSEL_MASK	(0x3f << 0)
+
+#define OTAR02			0x10004
+#define OTAR13			0x01004
+
+/* -----------------------------------------------------------------------------
+ * Dual Display Output Control Registers
+ */
+
+#define DORCR			0x11000
+#define DORCR_PG1T		(1 << 30)
+#define DORCR_DK1S		(1 << 28)
+#define DORCR_PG1D_DS0		(0 << 24)
+#define DORCR_PG1D_DS1		(1 << 24)
+#define DORCR_PG1D_FIX0		(2 << 24)
+#define DORCR_PG1D_DOOR		(3 << 24)
+#define DORCR_PG1D_MASK		(3 << 24)
+#define DORCR_DR0D		(1 << 21)
+#define DORCR_PG0D_DS0		(0 << 16)
+#define DORCR_PG0D_DS1		(1 << 16)
+#define DORCR_PG0D_FIX0		(2 << 16)
+#define DORCR_PG0D_DOOR		(3 << 16)
+#define DORCR_PG0D_MASK		(3 << 16)
+#define DORCR_RGPV		(1 << 4)
+#define DORCR_DPRS		(1 << 0)
+
+#define DPTSR			0x11004
+#define DPTSR_PnDK(n)		(1 << ((n) + 16))
+#define DPTSR_PnTS(n)		(1 << (n))
+
+#define DAPTSR			0x11008
+#define DAPTSR_APnDK(n)		(1 << ((n) + 16))
+#define DAPTSR_APnTS(n)		(1 << (n))
+
+#define DS1PR			0x11020
+#define DS2PR			0x11024
+
+/* -----------------------------------------------------------------------------
+ * YC-RGB Conversion Coefficient Registers
+ */
+
+#define YNCR			0x11080
+#define YNOR			0x11084
+#define CRNOR			0x11088
+#define CBNOR			0x1108c
+#define RCRCR			0x11090
+#define GCRCR			0x11094
+#define GCBCR			0x11098
+#define BCBCR			0x1109c
+
+#endif /* __RCAR_DU_REGS_H__ */

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_vsp.c

@@ -0,0 +1,553 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * R-Car Display Unit VSP-Based Compositor
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_blend.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_fb_dma_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_vblank.h>
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+
+#include <media/vsp1.h>
+
+#include "rcar_du_drv.h"
+#include "rcar_du_kms.h"
+#include "rcar_du_vsp.h"
+#include "rcar_du_writeback.h"
+
+static void rcar_du_vsp_complete(void *private, unsigned int status, u32 crc)
+{
+	struct rcar_du_crtc *crtc = private;
+
+	if (crtc->vblank_enable)
+		drm_crtc_handle_vblank(&crtc->crtc);
+
+	if (status & VSP1_DU_STATUS_COMPLETE)
+		rcar_du_crtc_finish_page_flip(crtc);
+	if (status & VSP1_DU_STATUS_WRITEBACK)
+		rcar_du_writeback_complete(crtc);
+
+	drm_crtc_add_crc_entry(&crtc->crtc, false, 0, &crc);
+}
+
+void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
+{
+	const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode;
+	struct rcar_du_device *rcdu = crtc->dev;
+	struct vsp1_du_lif_config cfg = {
+		.width = mode->hdisplay,
+		.height = mode->vdisplay,
+		.interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE,
+		.callback = rcar_du_vsp_complete,
+		.callback_data = crtc,
+	};
+	struct rcar_du_plane_state state = {
+		.state = {
+			.alpha = DRM_BLEND_ALPHA_OPAQUE,
+			.crtc = &crtc->crtc,
+			.dst.x1 = 0,
+			.dst.y1 = 0,
+			.dst.x2 = mode->hdisplay,
+			.dst.y2 = mode->vdisplay,
+			.src.x1 = 0,
+			.src.y1 = 0,
+			.src.x2 = mode->hdisplay << 16,
+			.src.y2 = mode->vdisplay << 16,
+			.zpos = 0,
+		},
+		.format = rcar_du_format_info(DRM_FORMAT_XRGB8888),
+		.source = RCAR_DU_PLANE_VSPD1,
+		.colorkey = 0,
+	};
+
+	if (rcdu->info->gen >= 3)
+		state.hwindex = (crtc->index % 2) ? 2 : 0;
+	else
+		state.hwindex = crtc->index % 2;
+
+	__rcar_du_plane_setup(crtc->group, &state);
+
+	vsp1_du_enable(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
+}
+
+void rcar_du_vsp_disable(struct rcar_du_crtc *crtc)
+{
+	vsp1_du_disable(crtc->vsp->vsp, crtc->vsp_pipe);
+}
+
+void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc)
+{
+	vsp1_du_atomic_begin(crtc->vsp->vsp, crtc->vsp_pipe);
+}
+
+void rcar_du_vsp_atomic_flush(struct rcar_du_crtc *crtc)
+{
+	struct vsp1_du_atomic_pipe_config cfg = { { 0, } };
+	struct rcar_du_crtc_state *state;
+
+	state = to_rcar_crtc_state(crtc->crtc.state);
+	cfg.crc = state->crc;
+
+	rcar_du_writeback_setup(crtc, &cfg.writeback);
+
+	vsp1_du_atomic_flush(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
+}
+
+static const u32 rcar_du_vsp_formats[] = {
+	DRM_FORMAT_RGB332,
+	DRM_FORMAT_ARGB4444,
+	DRM_FORMAT_XRGB4444,
+	DRM_FORMAT_ARGB1555,
+	DRM_FORMAT_XRGB1555,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGRA8888,
+	DRM_FORMAT_BGRX8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV21,
+	DRM_FORMAT_NV16,
+	DRM_FORMAT_NV61,
+	DRM_FORMAT_YUV420,
+	DRM_FORMAT_YVU420,
+	DRM_FORMAT_YUV422,
+	DRM_FORMAT_YVU422,
+	DRM_FORMAT_YUV444,
+	DRM_FORMAT_YVU444,
+};
+
+/*
+ * Gen4 supports the same formats as above, and additionally 2-10-10-10 RGB
+ * formats and Y210 & Y212 formats.
+ */
+static const u32 rcar_du_vsp_formats_gen4[] = {
+	DRM_FORMAT_RGB332,
+	DRM_FORMAT_ARGB4444,
+	DRM_FORMAT_XRGB4444,
+	DRM_FORMAT_ARGB1555,
+	DRM_FORMAT_XRGB1555,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGRA8888,
+	DRM_FORMAT_BGRX8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_RGBX1010102,
+	DRM_FORMAT_RGBA1010102,
+	DRM_FORMAT_ARGB2101010,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_NV12,
+	DRM_FORMAT_NV21,
+	DRM_FORMAT_NV16,
+	DRM_FORMAT_NV61,
+	DRM_FORMAT_YUV420,
+	DRM_FORMAT_YVU420,
+	DRM_FORMAT_YUV422,
+	DRM_FORMAT_YVU422,
+	DRM_FORMAT_YUV444,
+	DRM_FORMAT_YVU444,
+	DRM_FORMAT_Y210,
+	DRM_FORMAT_Y212,
+};
+
+static u32 rcar_du_vsp_state_get_format(struct rcar_du_vsp_plane_state *state)
+{
+	u32 fourcc = state->format->fourcc;
+
+	if (state->state.pixel_blend_mode == DRM_MODE_BLEND_PIXEL_NONE) {
+		switch (fourcc) {
+		case DRM_FORMAT_ARGB1555:
+			fourcc = DRM_FORMAT_XRGB1555;
+			break;
+
+		case DRM_FORMAT_ARGB4444:
+			fourcc = DRM_FORMAT_XRGB4444;
+			break;
+
+		case DRM_FORMAT_ARGB8888:
+			fourcc = DRM_FORMAT_XRGB8888;
+			break;
+
+		case DRM_FORMAT_ABGR8888:
+			fourcc = DRM_FORMAT_XBGR8888;
+			break;
+
+		case DRM_FORMAT_BGRA8888:
+			fourcc = DRM_FORMAT_BGRX8888;
+			break;
+
+		case DRM_FORMAT_RGBA1010102:
+			fourcc = DRM_FORMAT_RGBX1010102;
+			break;
+		}
+	}
+
+	return fourcc;
+}
+
+static void rcar_du_vsp_plane_setup(struct rcar_du_vsp_plane *plane)
+{
+	struct rcar_du_vsp_plane_state *state =
+		to_rcar_vsp_plane_state(plane->plane.state);
+	struct rcar_du_crtc *crtc = to_rcar_crtc(state->state.crtc);
+	struct drm_framebuffer *fb = plane->plane.state->fb;
+	const struct rcar_du_format_info *format;
+	struct vsp1_du_atomic_config cfg = {
+		.pixelformat = 0,
+		.pitch = fb->pitches[0],
+		.alpha = state->state.alpha >> 8,
+		.zpos = state->state.zpos,
+	};
+	u32 fourcc = rcar_du_vsp_state_get_format(state);
+	unsigned int i;
+
+	cfg.src.left = state->state.src.x1 >> 16;
+	cfg.src.top = state->state.src.y1 >> 16;
+	cfg.src.width = drm_rect_width(&state->state.src) >> 16;
+	cfg.src.height = drm_rect_height(&state->state.src) >> 16;
+
+	cfg.dst.left = state->state.dst.x1;
+	cfg.dst.top = state->state.dst.y1;
+	cfg.dst.width = drm_rect_width(&state->state.dst);
+	cfg.dst.height = drm_rect_height(&state->state.dst);
+
+	for (i = 0; i < state->format->planes; ++i)
+		cfg.mem[i] = sg_dma_address(state->sg_tables[i].sgl)
+			   + fb->offsets[i];
+
+	format = rcar_du_format_info(fourcc);
+	cfg.pixelformat = format->v4l2;
+
+	cfg.premult = state->state.pixel_blend_mode == DRM_MODE_BLEND_PREMULTI;
+
+	vsp1_du_atomic_update(plane->vsp->vsp, crtc->vsp_pipe,
+			      plane->index, &cfg);
+}
+
+int rcar_du_vsp_map_fb(struct rcar_du_vsp *vsp, struct drm_framebuffer *fb,
+		       struct sg_table sg_tables[3])
+{
+	struct rcar_du_device *rcdu = vsp->dev;
+	unsigned int i, j;
+	int ret;
+
+	for (i = 0; i < fb->format->num_planes; ++i) {
+		struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i);
+		struct sg_table *sgt = &sg_tables[i];
+
+		if (gem->sgt) {
+			struct scatterlist *src;
+			struct scatterlist *dst;
+
+			/*
+			 * If the GEM buffer has a scatter gather table, it has
+			 * been imported from a dma-buf and has no physical
+			 * address as it might not be physically contiguous.
+			 * Copy the original scatter gather table to map it to
+			 * the VSP.
+			 */
+			ret = sg_alloc_table(sgt, gem->sgt->orig_nents,
+					     GFP_KERNEL);
+			if (ret)
+				goto fail;
+
+			src = gem->sgt->sgl;
+			dst = sgt->sgl;
+			for (j = 0; j < gem->sgt->orig_nents; ++j) {
+				sg_set_page(dst, sg_page(src), src->length,
+					    src->offset);
+				src = sg_next(src);
+				dst = sg_next(dst);
+			}
+		} else {
+			ret = dma_get_sgtable(rcdu->dev, sgt, gem->vaddr,
+					      gem->dma_addr, gem->base.size);
+			if (ret)
+				goto fail;
+		}
+
+		ret = vsp1_du_map_sg(vsp->vsp, sgt);
+		if (ret) {
+			sg_free_table(sgt);
+			goto fail;
+		}
+	}
+
+	return 0;
+
+fail:
+	while (i--) {
+		struct sg_table *sgt = &sg_tables[i];
+
+		vsp1_du_unmap_sg(vsp->vsp, sgt);
+		sg_free_table(sgt);
+	}
+
+	return ret;
+}
+
+static int rcar_du_vsp_plane_prepare_fb(struct drm_plane *plane,
+					struct drm_plane_state *state)
+{
+	struct rcar_du_vsp_plane_state *rstate = to_rcar_vsp_plane_state(state);
+	struct rcar_du_vsp *vsp = to_rcar_vsp_plane(plane)->vsp;
+	int ret;
+
+	/*
+	 * There's no need to prepare (and unprepare) the framebuffer when the
+	 * plane is not visible, as it will not be displayed.
+	 */
+	if (!state->visible)
+		return 0;
+
+	ret = rcar_du_vsp_map_fb(vsp, state->fb, rstate->sg_tables);
+	if (ret < 0)
+		return ret;
+
+	return drm_gem_plane_helper_prepare_fb(plane, state);
+}
+
+void rcar_du_vsp_unmap_fb(struct rcar_du_vsp *vsp, struct drm_framebuffer *fb,
+			  struct sg_table sg_tables[3])
+{
+	unsigned int i;
+
+	for (i = 0; i < fb->format->num_planes; ++i) {
+		struct sg_table *sgt = &sg_tables[i];
+
+		vsp1_du_unmap_sg(vsp->vsp, sgt);
+		sg_free_table(sgt);
+	}
+}
+
+static void rcar_du_vsp_plane_cleanup_fb(struct drm_plane *plane,
+					 struct drm_plane_state *state)
+{
+	struct rcar_du_vsp_plane_state *rstate = to_rcar_vsp_plane_state(state);
+	struct rcar_du_vsp *vsp = to_rcar_vsp_plane(plane)->vsp;
+
+	if (!state->visible)
+		return;
+
+	rcar_du_vsp_unmap_fb(vsp, state->fb, rstate->sg_tables);
+}
+
+static int rcar_du_vsp_plane_atomic_check(struct drm_plane *plane,
+					  struct drm_atomic_commit *state)
+{
+	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
+										 plane);
+	struct rcar_du_vsp_plane_state *rstate = to_rcar_vsp_plane_state(new_plane_state);
+
+	return __rcar_du_plane_atomic_check(plane, new_plane_state,
+					    &rstate->format);
+}
+
+static void rcar_du_vsp_plane_atomic_update(struct drm_plane *plane,
+					struct drm_atomic_commit *state)
+{
+	struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state, plane);
+	struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
+	struct rcar_du_vsp_plane *rplane = to_rcar_vsp_plane(plane);
+	struct rcar_du_crtc *crtc = to_rcar_crtc(old_state->crtc);
+
+	if (new_state->visible)
+		rcar_du_vsp_plane_setup(rplane);
+	else if (old_state->crtc)
+		vsp1_du_atomic_update(rplane->vsp->vsp, crtc->vsp_pipe,
+				      rplane->index, NULL);
+}
+
+static const struct drm_plane_helper_funcs rcar_du_vsp_plane_helper_funcs = {
+	.prepare_fb = rcar_du_vsp_plane_prepare_fb,
+	.cleanup_fb = rcar_du_vsp_plane_cleanup_fb,
+	.atomic_check = rcar_du_vsp_plane_atomic_check,
+	.atomic_update = rcar_du_vsp_plane_atomic_update,
+};
+
+static struct drm_plane_state *
+rcar_du_vsp_plane_atomic_duplicate_state(struct drm_plane *plane)
+{
+	struct rcar_du_vsp_plane_state *copy;
+
+	if (WARN_ON(!plane->state))
+		return NULL;
+
+	copy = kzalloc_obj(*copy);
+	if (copy == NULL)
+		return NULL;
+
+	__drm_atomic_helper_plane_duplicate_state(plane, &copy->state);
+
+	return &copy->state;
+}
+
+static void rcar_du_vsp_plane_atomic_destroy_state(struct drm_plane *plane,
+						   struct drm_plane_state *state)
+{
+	__drm_atomic_helper_plane_destroy_state(state);
+	kfree(to_rcar_vsp_plane_state(state));
+}
+
+static void rcar_du_vsp_plane_reset(struct drm_plane *plane)
+{
+	struct rcar_du_vsp_plane_state *state;
+
+	if (plane->state) {
+		rcar_du_vsp_plane_atomic_destroy_state(plane, plane->state);
+		plane->state = NULL;
+	}
+
+	state = kzalloc_obj(*state);
+	if (state == NULL)
+		return;
+
+	__drm_atomic_helper_plane_reset(plane, &state->state);
+}
+
+static const struct drm_plane_funcs rcar_du_vsp_plane_funcs = {
+	.update_plane = drm_atomic_helper_update_plane,
+	.disable_plane = drm_atomic_helper_disable_plane,
+	.reset = rcar_du_vsp_plane_reset,
+	.destroy = drm_plane_cleanup,
+	.atomic_duplicate_state = rcar_du_vsp_plane_atomic_duplicate_state,
+	.atomic_destroy_state = rcar_du_vsp_plane_atomic_destroy_state,
+};
+
+static void rcar_du_vsp_cleanup(struct drm_device *dev, void *res)
+{
+	struct rcar_du_vsp *vsp = res;
+	unsigned int i;
+
+	for (i = 0; i < vsp->num_planes; ++i) {
+		struct rcar_du_vsp_plane *plane = &vsp->planes[i];
+
+		drm_plane_cleanup(&plane->plane);
+	}
+
+	kfree(vsp->planes);
+
+	if (vsp->link)
+		device_link_del(vsp->link);
+
+	put_device(vsp->vsp);
+}
+
+int rcar_du_vsp_init(struct rcar_du_vsp *vsp, struct device_node *np,
+		     unsigned int crtcs)
+{
+	struct rcar_du_device *rcdu = vsp->dev;
+	struct platform_device *pdev;
+	unsigned int num_crtcs = hweight32(crtcs);
+	unsigned int num_planes;
+	unsigned int i;
+	int ret;
+
+	/* Find the VSP device and initialize it. */
+	pdev = of_find_device_by_node(np);
+	if (!pdev)
+		return -ENXIO;
+
+	vsp->vsp = &pdev->dev;
+
+	ret = drmm_add_action_or_reset(&rcdu->ddev, rcar_du_vsp_cleanup, vsp);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Enforce suspend/resume ordering between the DU (consumer) and the
+	 * VSP (supplier). The DU will be suspended before and resume after the
+	 * VSP.
+	 */
+	vsp->link = device_link_add(rcdu->dev, vsp->vsp, DL_FLAG_STATELESS);
+	if (!vsp->link) {
+		dev_err(rcdu->dev, "Failed to create device link to VSP %s\n",
+			dev_name(vsp->vsp));
+		return -EINVAL;
+	}
+
+	ret = vsp1_du_init(vsp->vsp);
+	if (ret < 0)
+		return ret;
+
+	num_planes = rcdu->info->num_rpf;
+
+	vsp->planes = kzalloc_objs(*vsp->planes, num_planes);
+	if (!vsp->planes)
+		return -ENOMEM;
+
+	for (i = 0; i < num_planes; ++i) {
+		enum drm_plane_type type = i < num_crtcs
+					 ? DRM_PLANE_TYPE_PRIMARY
+					 : DRM_PLANE_TYPE_OVERLAY;
+		struct rcar_du_vsp_plane *plane = &vsp->planes[i];
+		unsigned int num_formats;
+		const u32 *formats;
+
+		if (rcdu->info->gen < 4) {
+			num_formats = ARRAY_SIZE(rcar_du_vsp_formats);
+			formats = rcar_du_vsp_formats;
+		} else {
+			num_formats = ARRAY_SIZE(rcar_du_vsp_formats_gen4);
+			formats = rcar_du_vsp_formats_gen4;
+		}
+
+		plane->vsp = vsp;
+		plane->index = i;
+
+		ret = drm_universal_plane_init(&rcdu->ddev, &plane->plane,
+					       crtcs, &rcar_du_vsp_plane_funcs,
+					       formats, num_formats,
+					       NULL, type, NULL);
+		if (ret < 0)
+			return ret;
+
+		drm_plane_helper_add(&plane->plane,
+				     &rcar_du_vsp_plane_helper_funcs);
+
+		drm_plane_create_alpha_property(&plane->plane);
+		drm_plane_create_zpos_property(&plane->plane, i, 0,
+					       num_planes - 1);
+
+		drm_plane_create_blend_mode_property(&plane->plane,
+					BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					BIT(DRM_MODE_BLEND_PREMULTI) |
+					BIT(DRM_MODE_BLEND_COVERAGE));
+
+		vsp->num_planes++;
+	}
+
+	return 0;
+}

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_vsp.h

@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * R-Car Display Unit VSP-Based Compositor
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#ifndef __RCAR_DU_VSP_H__
+#define __RCAR_DU_VSP_H__
+
+#include <drm/drm_plane.h>
+
+struct device_link;
+struct drm_framebuffer;
+struct rcar_du_format_info;
+struct rcar_du_vsp;
+struct sg_table;
+
+struct rcar_du_vsp_plane {
+	struct drm_plane plane;
+	struct rcar_du_vsp *vsp;
+	unsigned int index;
+};
+
+struct rcar_du_vsp {
+	unsigned int index;
+	struct device *vsp;
+	struct device_link *link;
+	struct rcar_du_device *dev;
+	struct rcar_du_vsp_plane *planes;
+	unsigned int num_planes;
+};
+
+static inline struct rcar_du_vsp_plane *to_rcar_vsp_plane(struct drm_plane *p)
+{
+	return container_of(p, struct rcar_du_vsp_plane, plane);
+}
+
+/**
+ * struct rcar_du_vsp_plane_state - Driver-specific plane state
+ * @state: base DRM plane state
+ * @format: information about the pixel format used by the plane
+ * @sg_tables: scatter-gather tables for the frame buffer memory
+ */
+struct rcar_du_vsp_plane_state {
+	struct drm_plane_state state;
+
+	const struct rcar_du_format_info *format;
+	struct sg_table sg_tables[3];
+};
+
+static inline struct rcar_du_vsp_plane_state *
+to_rcar_vsp_plane_state(struct drm_plane_state *state)
+{
+	return container_of(state, struct rcar_du_vsp_plane_state, state);
+}
+
+#ifdef CONFIG_DRM_RCAR_VSP
+int rcar_du_vsp_init(struct rcar_du_vsp *vsp, struct device_node *np,
+		     unsigned int crtcs);
+void rcar_du_vsp_enable(struct rcar_du_crtc *crtc);
+void rcar_du_vsp_disable(struct rcar_du_crtc *crtc);
+void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc);
+void rcar_du_vsp_atomic_flush(struct rcar_du_crtc *crtc);
+int rcar_du_vsp_map_fb(struct rcar_du_vsp *vsp, struct drm_framebuffer *fb,
+		       struct sg_table sg_tables[3]);
+void rcar_du_vsp_unmap_fb(struct rcar_du_vsp *vsp, struct drm_framebuffer *fb,
+			  struct sg_table sg_tables[3]);
+#else
+static inline int rcar_du_vsp_init(struct rcar_du_vsp *vsp,
+				   struct device_node *np,
+				   unsigned int crtcs)
+{
+	return -ENXIO;
+}
+static inline void rcar_du_vsp_enable(struct rcar_du_crtc *crtc) { };
+static inline void rcar_du_vsp_disable(struct rcar_du_crtc *crtc) { };
+static inline void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc) { };
+static inline void rcar_du_vsp_atomic_flush(struct rcar_du_crtc *crtc) { };
+static inline int rcar_du_vsp_map_fb(struct rcar_du_vsp *vsp,
+				     struct drm_framebuffer *fb,
+				     struct sg_table sg_tables[3])
+{
+	return -ENXIO;
+}
+static inline void rcar_du_vsp_unmap_fb(struct rcar_du_vsp *vsp,
+					struct drm_framebuffer *fb,
+					struct sg_table sg_tables[3])
+{
+}
+#endif
+
+#endif /* __RCAR_DU_VSP_H__ */

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_writeback.c

@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * R-Car Display Unit Writeback Support
+ *
+ * Copyright (C) 2019 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ */
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_device.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_writeback.h>
+
+#include "rcar_du_crtc.h"
+#include "rcar_du_drv.h"
+#include "rcar_du_kms.h"
+#include "rcar_du_writeback.h"
+
+/**
+ * struct rcar_du_wb_conn_state - Driver-specific writeback connector state
+ * @state: base DRM connector state
+ * @format: format of the writeback framebuffer
+ */
+struct rcar_du_wb_conn_state {
+	struct drm_connector_state state;
+	const struct rcar_du_format_info *format;
+};
+
+#define to_rcar_wb_conn_state(s) \
+	container_of(s, struct rcar_du_wb_conn_state, state)
+
+/**
+ * struct rcar_du_wb_job - Driver-private data for writeback jobs
+ * @sg_tables: scatter-gather tables for the framebuffer memory
+ */
+struct rcar_du_wb_job {
+	struct sg_table sg_tables[3];
+};
+
+static int rcar_du_wb_conn_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+
+	return drm_add_modes_noedid(connector, dev->mode_config.max_width,
+				    dev->mode_config.max_height);
+}
+
+static int rcar_du_wb_prepare_job(struct drm_writeback_connector *connector,
+				  struct drm_writeback_job *job)
+{
+	struct rcar_du_crtc *rcrtc = wb_to_rcar_crtc(connector);
+	struct rcar_du_wb_job *rjob;
+	int ret;
+
+	if (!job->fb)
+		return 0;
+
+	rjob = kzalloc_obj(*rjob);
+	if (!rjob)
+		return -ENOMEM;
+
+	/* Map the framebuffer to the VSP. */
+	ret = rcar_du_vsp_map_fb(rcrtc->vsp, job->fb, rjob->sg_tables);
+	if (ret < 0) {
+		kfree(rjob);
+		return ret;
+	}
+
+	job->priv = rjob;
+	return 0;
+}
+
+static void rcar_du_wb_cleanup_job(struct drm_writeback_connector *connector,
+				   struct drm_writeback_job *job)
+{
+	struct rcar_du_crtc *rcrtc = wb_to_rcar_crtc(connector);
+	struct rcar_du_wb_job *rjob = job->priv;
+
+	if (!job->fb)
+		return;
+
+	rcar_du_vsp_unmap_fb(rcrtc->vsp, job->fb, rjob->sg_tables);
+	kfree(rjob);
+}
+
+static const struct drm_connector_helper_funcs rcar_du_wb_conn_helper_funcs = {
+	.get_modes = rcar_du_wb_conn_get_modes,
+	.prepare_writeback_job = rcar_du_wb_prepare_job,
+	.cleanup_writeback_job = rcar_du_wb_cleanup_job,
+};
+
+static struct drm_connector_state *
+rcar_du_wb_conn_duplicate_state(struct drm_connector *connector)
+{
+	struct rcar_du_wb_conn_state *copy;
+
+	if (WARN_ON(!connector->state))
+		return NULL;
+
+	copy = kzalloc_obj(*copy);
+	if (!copy)
+		return NULL;
+
+	__drm_atomic_helper_connector_duplicate_state(connector, &copy->state);
+
+	return &copy->state;
+}
+
+static void rcar_du_wb_conn_destroy_state(struct drm_connector *connector,
+					  struct drm_connector_state *state)
+{
+	__drm_atomic_helper_connector_destroy_state(state);
+	kfree(to_rcar_wb_conn_state(state));
+}
+
+static void rcar_du_wb_conn_reset(struct drm_connector *connector)
+{
+	struct rcar_du_wb_conn_state *state;
+
+	if (connector->state) {
+		rcar_du_wb_conn_destroy_state(connector, connector->state);
+		connector->state = NULL;
+	}
+
+	state = kzalloc_obj(*state);
+	if (state == NULL)
+		return;
+
+	__drm_atomic_helper_connector_reset(connector, &state->state);
+}
+
+static const struct drm_connector_funcs rcar_du_wb_conn_funcs = {
+	.reset = rcar_du_wb_conn_reset,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.atomic_duplicate_state = rcar_du_wb_conn_duplicate_state,
+	.atomic_destroy_state = rcar_du_wb_conn_destroy_state,
+};
+
+static int rcar_du_wb_enc_atomic_check(struct drm_encoder *encoder,
+				       struct drm_crtc_state *crtc_state,
+				       struct drm_connector_state *conn_state)
+{
+	struct rcar_du_wb_conn_state *wb_state =
+		to_rcar_wb_conn_state(conn_state);
+	const struct drm_display_mode *mode = &crtc_state->mode;
+	struct drm_device *dev = encoder->dev;
+	struct drm_framebuffer *fb;
+
+	if (!conn_state->writeback_job)
+		return 0;
+
+	fb = conn_state->writeback_job->fb;
+
+	/*
+	 * Verify that the framebuffer format is supported and that its size
+	 * matches the current mode.
+	 */
+	if (fb->width != mode->hdisplay || fb->height != mode->vdisplay) {
+		dev_dbg(dev->dev, "%s: invalid framebuffer size %ux%u\n",
+			__func__, fb->width, fb->height);
+		return -EINVAL;
+	}
+
+	wb_state->format = rcar_du_format_info(fb->format->format);
+	if (wb_state->format == NULL) {
+		dev_dbg(dev->dev, "%s: unsupported format %p4cc\n", __func__,
+			&fb->format->format);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct drm_encoder_helper_funcs rcar_du_wb_enc_helper_funcs = {
+	.atomic_check = rcar_du_wb_enc_atomic_check,
+};
+
+/*
+ * Only RGB formats are currently supported as the VSP outputs RGB to the DU
+ * and can't convert to YUV separately for writeback.
+ */
+static const u32 writeback_formats[] = {
+	DRM_FORMAT_RGB332,
+	DRM_FORMAT_ARGB4444,
+	DRM_FORMAT_XRGB4444,
+	DRM_FORMAT_ARGB1555,
+	DRM_FORMAT_XRGB1555,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_BGR888,
+	DRM_FORMAT_RGB888,
+	DRM_FORMAT_BGRA8888,
+	DRM_FORMAT_BGRX8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XRGB8888,
+};
+
+int rcar_du_writeback_init(struct rcar_du_device *rcdu,
+			   struct rcar_du_crtc *rcrtc)
+{
+	struct drm_writeback_connector *wb_conn = &rcrtc->writeback;
+
+	drm_connector_helper_add(&wb_conn->base,
+				 &rcar_du_wb_conn_helper_funcs);
+
+	return drm_writeback_connector_init(&rcdu->ddev, wb_conn,
+					    &rcar_du_wb_conn_funcs,
+					    &rcar_du_wb_enc_helper_funcs,
+					    writeback_formats,
+					    ARRAY_SIZE(writeback_formats),
+					    1 << drm_crtc_index(&rcrtc->crtc));
+}
+
+void rcar_du_writeback_setup(struct rcar_du_crtc *rcrtc,
+			     struct vsp1_du_writeback_config *cfg)
+{
+	struct rcar_du_wb_conn_state *wb_state;
+	struct drm_connector_state *state;
+	struct rcar_du_wb_job *rjob;
+	struct drm_framebuffer *fb;
+	unsigned int i;
+
+	state = rcrtc->writeback.base.state;
+	if (!state || !state->writeback_job)
+		return;
+
+	fb = state->writeback_job->fb;
+	rjob = state->writeback_job->priv;
+	wb_state = to_rcar_wb_conn_state(state);
+
+	cfg->pixelformat = wb_state->format->v4l2;
+	cfg->pitch = fb->pitches[0];
+
+	for (i = 0; i < wb_state->format->planes; ++i)
+		cfg->mem[i] = sg_dma_address(rjob->sg_tables[i].sgl)
+			    + fb->offsets[i];
+
+	drm_writeback_queue_job(&rcrtc->writeback, state);
+}
+
+void rcar_du_writeback_complete(struct rcar_du_crtc *rcrtc)
+{
+	drm_writeback_signal_completion(&rcrtc->writeback, 0);
+}

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_du_writeback.h

@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * R-Car Display Unit Writeback Support
+ *
+ * Copyright (C) 2019 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ */
+
+#ifndef __RCAR_DU_WRITEBACK_H__
+#define __RCAR_DU_WRITEBACK_H__
+
+#include <drm/drm_plane.h>
+
+struct rcar_du_crtc;
+struct rcar_du_device;
+struct vsp1_du_atomic_pipe_config;
+
+#ifdef CONFIG_DRM_RCAR_WRITEBACK
+int rcar_du_writeback_init(struct rcar_du_device *rcdu,
+			   struct rcar_du_crtc *rcrtc);
+void rcar_du_writeback_setup(struct rcar_du_crtc *rcrtc,
+			     struct vsp1_du_writeback_config *cfg);
+void rcar_du_writeback_complete(struct rcar_du_crtc *rcrtc);
+#else
+static inline int rcar_du_writeback_init(struct rcar_du_device *rcdu,
+					 struct rcar_du_crtc *rcrtc)
+{
+	return -ENXIO;
+}
+static inline void
+rcar_du_writeback_setup(struct rcar_du_crtc *rcrtc,
+			struct vsp1_du_writeback_config *cfg)
+{
+}
+static inline void rcar_du_writeback_complete(struct rcar_du_crtc *rcrtc)
+{
+}
+#endif
+
+#endif /* __RCAR_DU_WRITEBACK_H__ */

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_dw_hdmi.c

@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * R-Car Gen3 HDMI PHY
+ *
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_modes.h>
+
+#define RCAR_HDMI_PHY_OPMODE_PLLCFG	0x06	/* Mode of operation and PLL dividers */
+#define RCAR_HDMI_PHY_PLLCURRGMPCTRL	0x10	/* PLL current and Gmp (conductance) */
+#define RCAR_HDMI_PHY_PLLDIVCTRL	0x11	/* PLL dividers */
+
+struct rcar_hdmi_phy_params {
+	unsigned long mpixelclock;
+	u16 opmode_div;	/* Mode of operation and PLL dividers */
+	u16 curr_gmp;	/* PLL current and Gmp (conductance) */
+	u16 div;	/* PLL dividers */
+};
+
+static const struct rcar_hdmi_phy_params rcar_hdmi_phy_params[] = {
+	{ 35500000,  0x0003, 0x0344, 0x0328 },
+	{ 44900000,  0x0003, 0x0285, 0x0128 },
+	{ 71000000,  0x0002, 0x1184, 0x0314 },
+	{ 90000000,  0x0002, 0x1144, 0x0114 },
+	{ 140250000, 0x0001, 0x20c4, 0x030a },
+	{ 182750000, 0x0001, 0x2084, 0x010a },
+	{ 281250000, 0x0000, 0x0084, 0x0305 },
+	{ 297000000, 0x0000, 0x0084, 0x0105 },
+	{ ~0UL,      0x0000, 0x0000, 0x0000 },
+};
+
+static enum drm_mode_status
+rcar_hdmi_mode_valid(struct dw_hdmi *hdmi, void *data,
+		     const struct drm_display_info *info,
+		     const struct drm_display_mode *mode)
+{
+	/*
+	 * The maximum supported clock frequency is 297 MHz, as shown in the PHY
+	 * parameters table.
+	 */
+	if (mode->clock > 297000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static int rcar_hdmi_phy_configure(struct dw_hdmi *hdmi, void *data,
+				   unsigned long mpixelclock)
+{
+	const struct rcar_hdmi_phy_params *params = rcar_hdmi_phy_params;
+
+	for (; params->mpixelclock != ~0UL; ++params) {
+		if (mpixelclock <= params->mpixelclock)
+			break;
+	}
+
+	if (params->mpixelclock == ~0UL)
+		return -EINVAL;
+
+	dw_hdmi_phy_i2c_write(hdmi, params->opmode_div,
+			      RCAR_HDMI_PHY_OPMODE_PLLCFG);
+	dw_hdmi_phy_i2c_write(hdmi, params->curr_gmp,
+			      RCAR_HDMI_PHY_PLLCURRGMPCTRL);
+	dw_hdmi_phy_i2c_write(hdmi, params->div, RCAR_HDMI_PHY_PLLDIVCTRL);
+
+	return 0;
+}
+
+static const struct dw_hdmi_plat_data rcar_dw_hdmi_plat_data = {
+	.output_port = 1,
+	.mode_valid = rcar_hdmi_mode_valid,
+	.configure_phy	= rcar_hdmi_phy_configure,
+};
+
+static int rcar_dw_hdmi_probe(struct platform_device *pdev)
+{
+	struct dw_hdmi *hdmi;
+
+	hdmi = dw_hdmi_probe(pdev, &rcar_dw_hdmi_plat_data);
+	if (IS_ERR(hdmi))
+		return PTR_ERR(hdmi);
+
+	platform_set_drvdata(pdev, hdmi);
+
+	return 0;
+}
+
+static void rcar_dw_hdmi_remove(struct platform_device *pdev)
+{
+	struct dw_hdmi *hdmi = platform_get_drvdata(pdev);
+
+	dw_hdmi_remove(hdmi);
+}
+
+static const struct of_device_id rcar_dw_hdmi_of_table[] = {
+	{ .compatible = "renesas,rcar-gen3-hdmi" },
+	{ /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rcar_dw_hdmi_of_table);
+
+static struct platform_driver rcar_dw_hdmi_platform_driver = {
+	.probe		= rcar_dw_hdmi_probe,
+	.remove		= rcar_dw_hdmi_remove,
+	.driver		= {
+		.name	= "rcar-dw-hdmi",
+		.of_match_table = rcar_dw_hdmi_of_table,
+	},
+};
+
+module_platform_driver(rcar_dw_hdmi_platform_driver);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 HDMI Encoder Driver");
+MODULE_LICENSE("GPL");

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_lvds.h

@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * R-Car LVDS Encoder
+ *
+ * Copyright (C) 2013-2018 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#ifndef __RCAR_LVDS_H__
+#define __RCAR_LVDS_H__
+
+struct drm_bridge;
+
+#if IS_ENABLED(CONFIG_DRM_RCAR_LVDS)
+int rcar_lvds_pclk_enable(struct drm_bridge *bridge, unsigned long freq,
+			  bool dot_clk_only);
+void rcar_lvds_pclk_disable(struct drm_bridge *bridge, bool dot_clk_only);
+bool rcar_lvds_dual_link(struct drm_bridge *bridge);
+bool rcar_lvds_is_connected(struct drm_bridge *bridge);
+#else
+static inline int rcar_lvds_pclk_enable(struct drm_bridge *bridge,
+					unsigned long freq, bool dot_clk_only)
+{
+	return -ENOSYS;
+}
+static inline void rcar_lvds_pclk_disable(struct drm_bridge *bridge,
+					  bool dot_clock_only)
+{
+}
+static inline bool rcar_lvds_dual_link(struct drm_bridge *bridge)
+{
+	return false;
+}
+static inline bool rcar_lvds_is_connected(struct drm_bridge *bridge)
+{
+	return false;
+}
+#endif /* CONFIG_DRM_RCAR_LVDS */
+
+#endif /* __RCAR_LVDS_H__ */

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_lvds_regs.h

@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * R-Car LVDS Interface Registers Definitions
+ *
+ * Copyright (C) 2013-2015 Renesas Electronics Corporation
+ *
+ * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ */
+
+#ifndef __RCAR_LVDS_REGS_H__
+#define __RCAR_LVDS_REGS_H__
+
+#define LVDCR0				0x0000
+#define LVDCR0_DUSEL			(1 << 15)
+#define LVDCR0_DMD			(1 << 12)		/* Gen2 only */
+#define LVDCR0_LVMD_MASK		(0xf << 8)
+#define LVDCR0_LVMD_SHIFT		8
+#define LVDCR0_PLLON			(1 << 4)
+#define LVDCR0_PWD			(1 << 2)		/* Gen3 only */
+#define LVDCR0_BEN			(1 << 2)		/* Gen2 only */
+#define LVDCR0_LVEN			(1 << 1)
+#define LVDCR0_LVRES			(1 << 0)
+
+#define LVDCR1				0x0004
+#define LVDCR1_CKSEL			(1 << 15)		/* Gen2 only */
+#define LVDCR1_CHSTBY(n)		(3 << (2 + (n) * 2))
+#define LVDCR1_CLKSTBY			(3 << 0)
+
+#define LVDPLLCR			0x0008
+/* Gen2 & V3M */
+#define LVDPLLCR_CEEN			(1 << 14)
+#define LVDPLLCR_FBEN			(1 << 13)
+#define LVDPLLCR_COSEL			(1 << 12)
+#define LVDPLLCR_PLLDLYCNT_150M		(0x1bf << 0)
+#define LVDPLLCR_PLLDLYCNT_121M		(0x22c << 0)
+#define LVDPLLCR_PLLDLYCNT_60M		(0x77b << 0)
+#define LVDPLLCR_PLLDLYCNT_38M		(0x69a << 0)
+#define LVDPLLCR_PLLDLYCNT_MASK		(0x7ff << 0)
+/* Gen3 but V3M,D3 and E3 */
+#define LVDPLLCR_PLLDIVCNT_42M		(0x014cb << 0)
+#define LVDPLLCR_PLLDIVCNT_85M		(0x00a45 << 0)
+#define LVDPLLCR_PLLDIVCNT_128M		(0x006c3 << 0)
+#define LVDPLLCR_PLLDIVCNT_148M		(0x046c1 << 0)
+#define LVDPLLCR_PLLDIVCNT_MASK		(0x7ffff << 0)
+/* D3 and E3 */
+#define LVDPLLCR_PLLON			(1 << 22)
+#define LVDPLLCR_PLLSEL_PLL0		(0 << 20)
+#define LVDPLLCR_PLLSEL_LVX		(1 << 20)
+#define LVDPLLCR_PLLSEL_PLL1		(2 << 20)
+#define LVDPLLCR_CKSEL_LVX		(1 << 17)
+#define LVDPLLCR_CKSEL_EXTAL		(3 << 17)
+#define LVDPLLCR_CKSEL_DU_DOTCLKIN(n)	((5 + (n) * 2) << 17)
+#define LVDPLLCR_OCKSEL			(1 << 16)
+#define LVDPLLCR_STP_CLKOUTE		(1 << 14)
+#define LVDPLLCR_OUTCLKSEL		(1 << 12)
+#define LVDPLLCR_CLKOUT			(1 << 11)
+#define LVDPLLCR_PLLE(n)		((n) << 10)
+#define LVDPLLCR_PLLN(n)		((n) << 3)
+#define LVDPLLCR_PLLM(n)		((n) << 0)
+
+#define LVDCTRCR			0x000c
+#define LVDCTRCR_CTR3SEL_ZERO		(0 << 12)
+#define LVDCTRCR_CTR3SEL_ODD		(1 << 12)
+#define LVDCTRCR_CTR3SEL_CDE		(2 << 12)
+#define LVDCTRCR_CTR3SEL_MASK		(7 << 12)
+#define LVDCTRCR_CTR2SEL_DISP		(0 << 8)
+#define LVDCTRCR_CTR2SEL_ODD		(1 << 8)
+#define LVDCTRCR_CTR2SEL_CDE		(2 << 8)
+#define LVDCTRCR_CTR2SEL_HSYNC		(3 << 8)
+#define LVDCTRCR_CTR2SEL_VSYNC		(4 << 8)
+#define LVDCTRCR_CTR2SEL_MASK		(7 << 8)
+#define LVDCTRCR_CTR1SEL_VSYNC		(0 << 4)
+#define LVDCTRCR_CTR1SEL_DISP		(1 << 4)
+#define LVDCTRCR_CTR1SEL_ODD		(2 << 4)
+#define LVDCTRCR_CTR1SEL_CDE		(3 << 4)
+#define LVDCTRCR_CTR1SEL_HSYNC		(4 << 4)
+#define LVDCTRCR_CTR1SEL_MASK		(7 << 4)
+#define LVDCTRCR_CTR0SEL_HSYNC		(0 << 0)
+#define LVDCTRCR_CTR0SEL_VSYNC		(1 << 0)
+#define LVDCTRCR_CTR0SEL_DISP		(2 << 0)
+#define LVDCTRCR_CTR0SEL_ODD		(3 << 0)
+#define LVDCTRCR_CTR0SEL_CDE		(4 << 0)
+#define LVDCTRCR_CTR0SEL_MASK		(7 << 0)
+
+#define LVDCHCR				0x0010
+#define LVDCHCR_CHSEL_CH(n, c)		((((c) - (n)) & 3) << ((n) * 4))
+#define LVDCHCR_CHSEL_MASK(n)		(3 << ((n) * 4))
+
+/* All registers below are specific to D3 and E3 */
+#define LVDSTRIPE			0x0014
+#define LVDSTRIPE_ST_TRGSEL_DISP	(0 << 2)
+#define LVDSTRIPE_ST_TRGSEL_HSYNC_R	(1 << 2)
+#define LVDSTRIPE_ST_TRGSEL_HSYNC_F	(2 << 2)
+#define LVDSTRIPE_ST_SWAP		(1 << 1)
+#define LVDSTRIPE_ST_ON			(1 << 0)
+
+#define LVDSCR				0x0018
+#define LVDSCR_DEPTH(n)			(((n) - 1) << 29)
+#define LVDSCR_BANDSET			(1 << 28)
+#define LVDSCR_TWGCNT(n)		((((n) - 256) / 16) << 24)
+#define LVDSCR_SDIV(n)			((n) << 22)
+#define LVDSCR_MODE			(1 << 21)
+#define LVDSCR_RSTN			(1 << 20)
+
+#define LVDDIV				0x001c
+#define LVDDIV_DIVSEL			(1 << 8)
+#define LVDDIV_DIVRESET			(1 << 7)
+#define LVDDIV_DIVSTP			(1 << 6)
+#define LVDDIV_DIV(n)			((n) << 0)
+
+#endif /* __RCAR_LVDS_REGS_H__ */

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.h

@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * R-Car DSI Encoder
+ *
+ * Copyright (C) 2022 Renesas Electronics Corporation
+ *
+ * Contact: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
+ */
+
+#ifndef __RCAR_MIPI_DSI_H__
+#define __RCAR_MIPI_DSI_H__
+
+struct drm_atomic_commit;
+struct drm_bridge;
+
+#if IS_ENABLED(CONFIG_DRM_RCAR_MIPI_DSI)
+void rcar_mipi_dsi_pclk_enable(struct drm_bridge *bridge,
+			       struct drm_atomic_commit *state);
+void rcar_mipi_dsi_pclk_disable(struct drm_bridge *bridge);
+#else
+static inline void rcar_mipi_dsi_pclk_enable(struct drm_bridge *bridge,
+					     struct drm_atomic_commit *state)
+{
+}
+
+static inline void rcar_mipi_dsi_pclk_disable(struct drm_bridge *bridge)
+{
+}
+#endif /* CONFIG_DRM_RCAR_MIPI_DSI */
+
+#endif /* __RCAR_MIPI_DSI_H__ */

linux-7.2.3/drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi_regs.h

@@ -0,0 +1,319 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * R-Car MIPI DSI Interface Registers Definitions
+ *
+ * Copyright (C) 2020 Renesas Electronics Corporation
+ */
+
+#ifndef __RCAR_MIPI_DSI_REGS_H__
+#define __RCAR_MIPI_DSI_REGS_H__
+
+#define LINKSR				0x010
+#define LINKSR_LPBUSY			BIT_U32(1)
+#define LINKSR_HSBUSY			BIT_U32(0)
+
+#define TXSETR				0x100
+#define TXSETR_LANECNT_MASK		GENMASK_U32(1, 0)
+
+/*
+ * DSI Command Transfer Registers
+ */
+#define TXCMSETR			0x110
+#define TXCMSETR_SPDTYP			BIT_U32(8)	/* 0:HS 1:LP */
+#define TXCMSETR_LPPDACC		BIT_U32(0)
+#define TXCMCR				0x120
+#define TXCMCR_BTATYP			BIT_U32(2)
+#define TXCMCR_BTAREQ			BIT_U32(1)
+#define TXCMCR_TXREQ			BIT_U32(0)
+#define TXCMSR				0x130
+#define TXCMSR_CLSNERR			BIT_U32(18)
+#define TXCMSR_AXIERR			BIT_U32(16)
+#define TXCMSR_TXREQEND			BIT_U32(0)
+#define TXCMSCR				0x134
+#define TXCMSCR_CLSNERR			BIT_U32(18)
+#define TXCMSCR_AXIERR			BIT_U32(16)
+#define TXCMSCR_TXREQEND		BIT_U32(0)
+#define TXCMIER				0x138
+#define TXCMIER_CLSNERR			BIT_U32(18)
+#define TXCMIER_AXIERR			BIT_U32(16)
+#define TXCMIER_TXREQEND		BIT_U32(0)
+#define TXCMADDRSET0R			0x140
+#define TXCMPHDR			0x150
+#define TXCMPHDR_FMT			BIT_U32(24)	/* 0:SP 1:LP */
+#define TXCMPHDR_VC_MASK		GENMASK_U32(23, 22)
+#define TXCMPHDR_VC(n)			FIELD_PREP(TXCMPHDR_VC_MASK, (n))
+#define TXCMPHDR_DT_MASK		GENMASK_U32(21, 16)
+#define TXCMPHDR_DT(n)			FIELD_PREP(TXCMPHDR_DT_MASK, (n))
+#define TXCMPHDR_DATA1_MASK		GENMASK_U32(15, 8)
+#define TXCMPHDR_DATA1(n)		FIELD_PREP(TXCMPHDR_DATA1_MASK, (n))
+#define TXCMPHDR_DATA0_MASK		GENMASK_U32(7, 0)
+#define TXCMPHDR_DATA0(n)		FIELD_PREP(TXCMPHDR_DATA0_MASK, (n))
+#define TXCMPPD0R			0x160
+#define TXCMPPD1R			0x164
+#define TXCMPPD2R			0x168
+#define TXCMPPD3R			0x16c
+
+#define RXSETR				0x200
+#define RXSETR_CRCEN_MASK		GENMASK_U32(27, 24)
+#define RXSETR_ECCEN_MASK		GENMASK_U32(19, 16)
+#define RXPSETR				0x210
+#define RXPSETR_LPPDACC			BIT_U32(0)
+#define RXPSR				0x220
+#define RXPSR_ECCERR1B			BIT_U32(28)
+#define RXPSR_UEXTRGERR			BIT_U32(25)
+#define RXPSR_RESPTOERR			BIT_U32(24)
+#define RXPSR_OVRERR			BIT_U32(23)
+#define RXPSR_AXIERR			BIT_U32(22)
+#define RXPSR_CRCERR			BIT_U32(21)
+#define RXPSR_WCERR			BIT_U32(20)
+#define RXPSR_UEXDTERR			BIT_U32(19)
+#define RXPSR_UEXPKTERR			BIT_U32(18)
+#define RXPSR_ECCERR			BIT_U32(17)
+#define RXPSR_MLFERR			BIT_U32(16)
+#define RXPSR_RCVACK			BIT_U32(14)
+#define RXPSR_RCVEOT			BIT_U32(10)
+#define RXPSR_RCVAKE			BIT_U32(9)
+#define RXPSR_RCVRESP			BIT_U32(8)
+#define RXPSR_BTAREQEND			BIT_U32(0)
+#define RXPSCR				0x224
+#define RXPSCR_ECCERR1B			BIT_U32(28)
+#define RXPSCR_UEXTRGERR		BIT_U32(25)
+#define RXPSCR_RESPTOERR		BIT_U32(24)
+#define RXPSCR_OVRERR			BIT_U32(23)
+#define RXPSCR_AXIERR			BIT_U32(22)
+#define RXPSCR_CRCERR			BIT_U32(21)
+#define RXPSCR_WCERR			BIT_U32(20)
+#define RXPSCR_UEXDTERR			BIT_U32(19)
+#define RXPSCR_UEXPKTERR		BIT_U32(18)
+#define RXPSCR_ECCERR			BIT_U32(17)
+#define RXPSCR_MLFERR			BIT_U32(16)
+#define RXPSCR_RCVACK			BIT_U32(14)
+#define RXPSCR_RCVEOT			BIT_U32(10)
+#define RXPSCR_RCVAKE			BIT_U32(9)
+#define RXPSCR_RCVRESP			BIT_U32(8)
+#define RXPSCR_BTAREQEND		BIT_U32(0)
+#define RXPIER				0x228
+#define RXPIER_ECCERR1B			BIT_U32(28)
+#define RXPIER_UEXTRGERR		BIT_U32(25)
+#define RXPIER_RESPTOERR		BIT_U32(24)
+#define RXPIER_OVRERR			BIT_U32(23)
+#define RXPIER_AXIERR			BIT_U32(22)
+#define RXPIER_CRCERR			BIT_U32(21)
+#define RXPIER_WCERR			BIT_U32(20)
+#define RXPIER_UEXDTERR			BIT_U32(19)
+#define RXPIER_UEXPKTERR		BIT_U32(18)
+#define RXPIER_ECCERR			BIT_U32(17)
+#define RXPIER_MLFERR			BIT_U32(16)
+#define RXPIER_RCVACK			BIT_U32(14)
+#define RXPIER_RCVEOT			BIT_U32(10)
+#define RXPIER_RCVAKE			BIT_U32(9)
+#define RXPIER_RCVRESP			BIT_U32(8)
+#define RXPIER_BTAREQEND		BIT_U32(0)
+#define RXPADDRSET0R			0x230
+#define RXPSIZESETR			0x238
+#define RXPSIZESETR_SIZE_MASK		GENMASK_U32(6, 3)
+#define RXPHDR				0x240
+#define RXPHDR_FMT			BIT_U32(24)	/* 0:SP 1:LP */
+#define RXPHDR_VC_MASK			GENMASK_U32(23, 22)
+#define RXPHDR_DT_MASK			GENMASK_U32(21, 16)
+#define RXPHDR_DATA1_MASK		GENMASK_U32(15, 8)
+#define RXPHDR_DATA0_MASK		GENMASK_U32(7, 0)
+#define RXPPD0R				0x250
+#define RXPPD1R				0x254
+#define RXPPD2R				0x258
+#define RXPPD3R				0x25c
+#define AKEPR				0x300
+#define AKEPR_VC_MASK			GENMASK_U32(23, 22)
+#define AKEPR_DT_MASK			GENMASK_U32(21, 16)
+#define AKEPR_ERRRPT_MASK		GENMASK_U32(15, 0)
+#define RXRESPTOSETR			0x400
+#define TACR				0x500
+#define TASR				0x510
+#define TASCR				0x514
+#define TAIER				0x518
+#define TOSR				0x610
+#define TOSR_TATO			BIT_U32(2)
+#define TOSR_LRXHTO			BIT_U32(1)
+#define TOSR_HRXTO			BIT_U32(0)
+#define TOSCR				0x614
+#define TOSCR_TATO			BIT_U32(2)
+#define TOSCR_LRXHTO			BIT_U32(1)
+#define TOSCR_HRXTO			BIT_U32(0)
+
+/*
+ * Video Mode Register
+ */
+#define TXVMSETR			0x180
+#define TXVMSETR_SYNSEQ_EVENTS		BIT_U32(16) /* 0:Pulses 1:Events */
+#define TXVMSETR_VSTPM			BIT_U32(15)
+#define TXVMSETR_PIXWDTH_MASK		GENMASK_U32(10, 8)
+#define TXVMSETR_PIXWDTH		BIT_U32(8) /* Only allowed value */
+#define TXVMSETR_VSEN			BIT_U32(4)
+#define TXVMSETR_HFPBPEN		BIT_U32(2)
+#define TXVMSETR_HBPBPEN		BIT_U32(1)
+#define TXVMSETR_HSABPEN		BIT_U32(0)
+
+#define TXVMCR				0x190
+#define TXVMCR_VFCLR			BIT_U32(12)
+#define TXVMCR_EN_VIDEO			BIT_U32(0)
+
+#define TXVMSR				0x1a0
+#define TXVMSR_STR			BIT_U32(16)
+#define TXVMSR_VFRDY			BIT_U32(12)
+#define TXVMSR_ACT			BIT_U32(8)
+#define TXVMSR_RDY			BIT_U32(0)
+
+#define TXVMSCR				0x1a4
+#define TXVMSCR_STR			BIT_U32(16)
+
+#define TXVMPSPHSETR			0x1c0
+#define TXVMPSPHSETR_DT_MASK		(0x3f << 16)
+#define TXVMPSPHSETR_DT_RGB16		FIELD_PREP(TXVMPSPHSETR_DT_MASK, 0x0e)
+#define TXVMPSPHSETR_DT_RGB18		FIELD_PREP(TXVMPSPHSETR_DT_MASK, 0x1e)
+#define TXVMPSPHSETR_DT_RGB18_LS	FIELD_PREP(TXVMPSPHSETR_DT_MASK, 0x2e)
+#define TXVMPSPHSETR_DT_RGB24		FIELD_PREP(TXVMPSPHSETR_DT_MASK, 0x3e)
+#define TXVMPSPHSETR_DT_YCBCR16		FIELD_PREP(TXVMPSPHSETR_DT_MASK, 0x2c)
+
+#define TXVMVPRMSET0R			0x1d0
+#define TXVMVPRMSET0R_HSPOL_LOW		BIT_U32(17) /* 0:High 1:Low */
+#define TXVMVPRMSET0R_VSPOL_LOW		BIT_U32(16) /* 0:High 1:Low */
+#define TXVMVPRMSET0R_CSPC_YCbCr	BIT_U32(4) /* 0:RGB 1:YCbCr */
+#define TXVMVPRMSET0R_BPP_MASK		GENMASK_U32(2, 0)
+#define TXVMVPRMSET0R_BPP_16		FIELD_PREP(TXVMVPRMSET0R_BPP_MASK, 0)
+#define TXVMVPRMSET0R_BPP_18		FIELD_PREP(TXVMVPRMSET0R_BPP_MASK, 1)
+#define TXVMVPRMSET0R_BPP_24		FIELD_PREP(TXVMVPRMSET0R_BPP_MASK, 2)
+
+#define TXVMVPRMSET1R			0x1d4
+#define TXVMVPRMSET1R_VACTIVE_MASK	GENMASK_U32(30, 16)
+#define TXVMVPRMSET1R_VACTIVE(n)	FIELD_PREP(TXVMVPRMSET1R_VACTIVE_MASK, (n))
+#define TXVMVPRMSET1R_VSA_MASK		GENMASK_U32(11, 0)
+#define TXVMVPRMSET1R_VSA(n)		FIELD_PREP(TXVMVPRMSET1R_VSA_MASK, (n))
+
+#define TXVMVPRMSET2R			0x1d8
+#define TXVMVPRMSET2R_VFP_MASK		GENMASK_U32(28, 16)
+#define TXVMVPRMSET2R_VFP(n)		FIELD_PREP(TXVMVPRMSET2R_VFP_MASK, (n))
+#define TXVMVPRMSET2R_VBP_MASK		GENMASK_U32(12, 0)
+#define TXVMVPRMSET2R_VBP(n)		FIELD_PREP(TXVMVPRMSET2R_VBP_MASK, (n))
+
+#define TXVMVPRMSET3R			0x1dc
+#define TXVMVPRMSET3R_HACTIVE_MASK	GENMASK_U32(30, 16)
+#define TXVMVPRMSET3R_HACTIVE(n)	FIELD_PREP(TXVMVPRMSET3R_HACTIVE_MASK, (n))
+#define TXVMVPRMSET3R_HSA_MASK		GENMASK_U32(11, 0)
+#define TXVMVPRMSET3R_HSA(n)		FIELD_PREP(TXVMVPRMSET3R_HSA_MASK, (n))
+
+#define TXVMVPRMSET4R			0x1e0
+#define TXVMVPRMSET4R_HFP_MASK		GENMASK_U32(28, 16)
+#define TXVMVPRMSET4R_HFP(n)		FIELD_PREP(TXVMVPRMSET4R_HFP_MASK, (n))
+#define TXVMVPRMSET4R_HBP_MASK		GENMASK_U32(12, 0)
+#define TXVMVPRMSET4R_HBP(n)		FIELD_PREP(TXVMVPRMSET4R_HBP_MASK, (n))
+
+/*
+ * PHY-Protocol Interface (PPI) Registers
+ */
+#define PPISETR				0x700
+#define PPISETR_DLEN_MASK		GENMASK_U32(3, 0)
+#define PPISETR_CLEN			BIT_U32(8)
+
+#define PPICLCR				0x710
+#define PPICLCR_TXREQHS			BIT_U32(8)
+#define PPICLCR_TXULPSEXT		BIT_U32(1)
+#define PPICLCR_TXULPSCLK		BIT_U32(0)
+
+#define PPICLSR				0x720
+#define PPICLSR_HSTOLP			BIT_U32(27)
+#define PPICLSR_TOHS			BIT_U32(26)
+#define PPICLSR_STPST			BIT_U32(0)
+
+#define PPICLSCR			0x724
+#define PPICLSCR_HSTOLP			BIT_U32(27)
+#define PPICLSCR_TOHS			BIT_U32(26)
+
+#define PPIDL0SR			0x740
+#define PPIDL0SR_DIR			BIT_U32(10)
+#define PPIDL0SR_STPST			BIT_U32(6)
+
+#define PPIDLSR				0x760
+#define PPIDLSR_STPST			GENMASK_U32(3, 0)
+
+/*
+ * Clocks registers
+ */
+#define LPCLKSET			0x1000
+#define LPCLKSET_CKEN			BIT_U32(8)
+#define LPCLKSET_LPCLKDIV_MASK		GENMASK_U32(5, 0)
+
+#define CFGCLKSET			0x1004
+#define CFGCLKSET_CKEN			BIT_U32(8)
+#define CFGCLKSET_CFGCLKDIV_MASK	GENMASK_U32(5, 0)
+
+#define DOTCLKDIV			0x1008
+#define DOTCLKDIV_CKEN			BIT_U32(8)
+#define DOTCLKDIV_DOTCLKDIV_MASK	GENMASK_U32(5, 0)
+
+#define VCLKSET				0x100c
+#define VCLKSET_CKEN			BIT_U32(16)
+#define VCLKSET_COLOR_YCC		BIT_U32(8) /* 0:RGB 1:YCbCr */
+#define VCLKSET_DIV_V3U_MASK		GENMASK_U32(5, 4)
+#define VCLKSET_DIV_V3U(n)		FIELD_PREP(VCLKSET_DIV_V3U_MASK, (n))
+#define VCLKSET_DIV_V4H_MASK		GENMASK_U32(6, 4)
+#define VCLKSET_DIV_V4H(n)		FIELD_PREP(VCLKSET_DIV_V4H_MASK, (n))
+#define VCLKSET_BPP_MASK		GENMASK_U32(3, 2)
+#define VCLKSET_BPP_16			FIELD_PREP(VCLKSET_BPP_MASK, 0)
+#define VCLKSET_BPP_18			FIELD_PREP(VCLKSET_BPP_MASK, 1)
+#define VCLKSET_BPP_18L			FIELD_PREP(VCLKSET_BPP_MASK, 2)
+#define VCLKSET_BPP_24			FIELD_PREP(VCLKSET_BPP_MASK, 3)
+#define VCLKSET_LANE_MASK		GENMASK_U32(1, 0)
+#define VCLKSET_LANE(n)			FIELD_PREP(VCLKSET_LANE_MASK, (n))
+
+#define VCLKEN				0x1010
+#define VCLKEN_CKEN			BIT_U32(0)
+
+#define PHYSETUP			0x1014
+#define PHYSETUP_HSFREQRANGE_MASK	GENMASK_U32(22, 16)
+#define PHYSETUP_HSFREQRANGE(n)		FIELD_PREP(PHYSETUP_HSFREQRANGE_MASK, (n))
+#define PHYSETUP_CFGCLKFREQRANGE_MASK	GENMASK_U32(13, 8)
+#define PHYSETUP_SHUTDOWNZ		BIT_U32(1)
+#define PHYSETUP_RSTZ			BIT_U32(0)
+
+#define CLOCKSET1			0x101c
+#define CLOCKSET1_LOCK_PHY		BIT_U32(17)
+#define CLOCKSET1_CLKSEL		BIT_U32(8)
+#define CLOCKSET1_CLKINSEL_MASK		GENMASK_U32(3, 2)
+#define CLOCKSET1_CLKINSEL_EXTAL	FIELD_PREP(CLOCKSET1_CLKINSEL_MASK, 0)
+#define CLOCKSET1_CLKINSEL_DIG		FIELD_PREP(CLOCKSET1_CLKINSEL_MASK, 1)
+#define CLOCKSET1_CLKINSEL_DU		FIELD_PREP(CLOCKSET1_CLKINSEL_MASK, 2)
+#define CLOCKSET1_SHADOW_CLEAR		BIT_U32(1)
+#define CLOCKSET1_UPDATEPLL		BIT_U32(0)
+
+#define CLOCKSET2			0x1020
+#define CLOCKSET2_M_MASK		GENMASK_U32(27, 16)
+#define CLOCKSET2_M(n)			FIELD_PREP(CLOCKSET2_M_MASK, (n))
+#define CLOCKSET2_VCO_CNTRL_MASK	GENMASK_U32(13, 8)
+#define CLOCKSET2_VCO_CNTRL(n)		FIELD_PREP(CLOCKSET2_VCO_CNTRL_MASK, (n))
+#define CLOCKSET2_N_MASK		GENMASK_U32(3, 0)
+#define CLOCKSET2_N(n)			FIELD_PREP(CLOCKSET2_N_MASK, (n))
+
+#define CLOCKSET3			0x1024
+#define CLOCKSET3_PROP_CNTRL_MASK	GENMASK_U32(29, 24)
+#define CLOCKSET3_PROP_CNTRL(n)	FIELD_PREP(CLOCKSET3_PROP_CNTRL_MASK, (n))
+#define CLOCKSET3_INT_CNTRL_MASK	GENMASK_U32(21, 16)
+#define CLOCKSET3_INT_CNTRL(n)		FIELD_PREP(CLOCKSET3_INT_CNTRL_MASK, (n))
+#define CLOCKSET3_CPBIAS_CNTRL_MASK	GENMASK_U32(14, 8)
+#define CLOCKSET3_CPBIAS_CNTRL(n)	FIELD_PREP(CLOCKSET3_CPBIAS_CNTRL_MASK, (n))
+#define CLOCKSET3_GMP_CNTRL_MASK	GENMASK_U32(1, 0)
+#define CLOCKSET3_GMP_CNTRL(n)		FIELD_PREP(CLOCKSET3_GMP_CNTRL_MASK, (n))
+
+#define PHTW				0x1034
+#define PHTW_DWEN			BIT_U32(24)
+#define PHTW_TESTDIN_DATA_MASK		GENMASK_U32(23, 16)
+#define PHTW_CWEN			BIT_U32(8)
+#define PHTW_TESTDIN_CODE_MASK		GENMASK_U32(7, 0)
+
+#define PHTR				0x1038
+#define PHTR_TESTDOUT			GENMASK_U32(23, 16)
+#define PHTR_TESTDOUT_TEST		BIT_U32(16)
+
+#define PHTC				0x103c
+#define PHTC_TESTCLR			BIT_U32(0)
+
+#endif /* __RCAR_MIPI_DSI_REGS_H__ */