Resguardo inicial

linux-7.2.3/drivers/gpu/drm/vboxvideo/Kconfig

@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+config DRM_VBOXVIDEO
+	tristate "Virtual Box Graphics Card"
+	depends on DRM && X86 && PCI
+	select DRM_CLIENT_SELECTION
+	select DRM_KMS_HELPER
+	select DRM_VRAM_HELPER
+	select DRM_TTM
+	select DRM_TTM_HELPER
+	select GENERIC_ALLOCATOR
+	help
+	  This is a KMS driver for the virtual Graphics Card used in
+	  Virtual Box virtual machines.
+
+	  Although it is possible to build this driver built-in to the
+	  kernel, it is advised to build it as a module, so that it can
+	  be updated independently of the kernel. Select M to build this
+	  driver as a module and add support for these devices via drm/kms
+	  interfaces.

linux-7.2.3/drivers/gpu/drm/vboxvideo/Makefile

@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+vboxvideo-y :=  hgsmi_base.o modesetting.o vbva_base.o \
+		vbox_drv.o vbox_hgsmi.o vbox_irq.o vbox_main.o \
+		vbox_mode.o vbox_ttm.o
+
+obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo.o

linux-7.2.3/drivers/gpu/drm/vboxvideo/hgsmi_base.c

@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: MIT
+/* Copyright (C) 2006-2017 Oracle Corporation */
+
+#include <linux/vbox_err.h>
+#include "vbox_drv.h"
+#include "vboxvideo_guest.h"
+#include "vboxvideo_vbe.h"
+#include "hgsmi_channels.h"
+#include "hgsmi_ch_setup.h"
+
+/**
+ * hgsmi_report_flags_location - Inform the host of the location of
+ *                               the host flags in VRAM via an HGSMI cmd.
+ * Return: 0 or negative errno value.
+ * @ctx:        The context of the guest heap to use.
+ * @location:   The offset chosen for the flags within guest VRAM.
+ */
+int hgsmi_report_flags_location(struct gen_pool *ctx, u32 location)
+{
+	struct hgsmi_buffer_location *p;
+
+	p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_HGSMI,
+			       HGSMI_CC_HOST_FLAGS_LOCATION);
+	if (!p)
+		return -ENOMEM;
+
+	p->buf_location = location;
+	p->buf_len = sizeof(struct hgsmi_host_flags);
+
+	hgsmi_buffer_submit(ctx, p);
+	hgsmi_buffer_free(ctx, p);
+
+	return 0;
+}
+
+/**
+ * hgsmi_send_caps_info - Notify the host of HGSMI-related guest capabilities
+ *                        via an HGSMI command.
+ * Return: 0 or negative errno value.
+ * @ctx:        The context of the guest heap to use.
+ * @caps:       The capabilities to report, see vbva_caps.
+ */
+int hgsmi_send_caps_info(struct gen_pool *ctx, u32 caps)
+{
+	struct vbva_caps *p;
+
+	p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_VBVA, VBVA_INFO_CAPS);
+	if (!p)
+		return -ENOMEM;
+
+	p->rc = VERR_NOT_IMPLEMENTED;
+	p->caps = caps;
+
+	hgsmi_buffer_submit(ctx, p);
+
+	WARN_ON_ONCE(p->rc < 0);
+
+	hgsmi_buffer_free(ctx, p);
+
+	return 0;
+}
+
+int hgsmi_test_query_conf(struct gen_pool *ctx)
+{
+	u32 value = 0;
+	int ret;
+
+	ret = hgsmi_query_conf(ctx, U32_MAX, &value);
+	if (ret)
+		return ret;
+
+	return value == U32_MAX ? 0 : -EIO;
+}
+
+/**
+ * hgsmi_query_conf - Query the host for an HGSMI configuration
+ *                    parameter via an HGSMI command.
+ * Return: 0 or negative errno value.
+ * @ctx:        The context containing the heap used.
+ * @index:      The index of the parameter to query.
+ * @value_ret:  Where to store the value of the parameter on success.
+ */
+int hgsmi_query_conf(struct gen_pool *ctx, u32 index, u32 *value_ret)
+{
+	struct vbva_conf32 *p;
+
+	p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_VBVA,
+			       VBVA_QUERY_CONF32);
+	if (!p)
+		return -ENOMEM;
+
+	p->index = index;
+	p->value = U32_MAX;
+
+	hgsmi_buffer_submit(ctx, p);
+
+	*value_ret = p->value;
+
+	hgsmi_buffer_free(ctx, p);
+
+	return 0;
+}
+
+/**
+ * hgsmi_update_pointer_shape - Pass the host a new mouse pointer shape
+ *                              via an HGSMI command.
+ * Return: 0 or negative errno value.
+ * @ctx:        The context containing the heap to be used.
+ * @flags:      Cursor flags.
+ * @hot_x:      Horizontal position of the hot spot.
+ * @hot_y:      Vertical position of the hot spot.
+ * @width:      Width in pixels of the cursor.
+ * @height:     Height in pixels of the cursor.
+ * @pixels:     Pixel data, @see VMMDevReqMousePointer for the format.
+ * @len:        Size in bytes of the pixel data.
+ */
+int hgsmi_update_pointer_shape(struct gen_pool *ctx, u32 flags,
+			       u32 hot_x, u32 hot_y, u32 width, u32 height,
+			       u8 *pixels, u32 len)
+{
+	struct vbva_mouse_pointer_shape *p;
+	u32 pixel_len = 0;
+	int rc;
+
+	if (flags & VBOX_MOUSE_POINTER_SHAPE) {
+		/*
+		 * Size of the pointer data:
+		 * sizeof (AND mask) + sizeof (XOR_MASK)
+		 */
+		pixel_len = ((((width + 7) / 8) * height + 3) & ~3) +
+			 width * 4 * height;
+		if (pixel_len > len)
+			return -EINVAL;
+
+		/*
+		 * If shape is supplied, then always create the pointer visible.
+		 * See comments in 'vboxUpdatePointerShape'
+		 */
+		flags |= VBOX_MOUSE_POINTER_VISIBLE;
+	}
+
+	/*
+	 * The 4 extra bytes come from switching struct vbva_mouse_pointer_shape
+	 * from having a 4 bytes fixed array at the end to using a proper VLA
+	 * at the end. These 4 extra bytes were not subtracted from sizeof(*p)
+	 * before the switch to the VLA, so this way the behavior is unchanged.
+	 * Chances are these 4 extra bytes are not necessary but they are kept
+	 * to avoid regressions.
+	 */
+	p = hgsmi_buffer_alloc(ctx, sizeof(*p) + pixel_len + 4, HGSMI_CH_VBVA,
+			       VBVA_MOUSE_POINTER_SHAPE);
+	if (!p)
+		return -ENOMEM;
+
+	p->result = VINF_SUCCESS;
+	p->flags = flags;
+	p->hot_X = hot_x;
+	p->hot_y = hot_y;
+	p->width = width;
+	p->height = height;
+	if (pixel_len)
+		memcpy(p->data, pixels, pixel_len);
+
+	hgsmi_buffer_submit(ctx, p);
+
+	switch (p->result) {
+	case VINF_SUCCESS:
+		rc = 0;
+		break;
+	case VERR_NO_MEMORY:
+		rc = -ENOMEM;
+		break;
+	case VERR_NOT_SUPPORTED:
+		rc = -EBUSY;
+		break;
+	default:
+		rc = -EINVAL;
+	}
+
+	hgsmi_buffer_free(ctx, p);
+
+	return rc;
+}

linux-7.2.3/drivers/gpu/drm/vboxvideo/hgsmi_ch_setup.h

@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: MIT */
+/* Copyright (C) 2006-2017 Oracle Corporation */
+
+#ifndef __HGSMI_CH_SETUP_H__
+#define __HGSMI_CH_SETUP_H__
+
+/*
+ * Tell the host the location of hgsmi_host_flags structure, where the host
+ * can write information about pending buffers, etc, and which can be quickly
+ * polled by the guest without a need to port IO.
+ */
+#define HGSMI_CC_HOST_FLAGS_LOCATION 0
+
+struct hgsmi_buffer_location {
+	u32 buf_location;
+	u32 buf_len;
+} __packed;
+
+/* HGSMI setup and configuration data structures. */
+
+#define HGSMIHOSTFLAGS_COMMANDS_PENDING    0x01u
+#define HGSMIHOSTFLAGS_IRQ                 0x02u
+#define HGSMIHOSTFLAGS_VSYNC               0x10u
+#define HGSMIHOSTFLAGS_HOTPLUG             0x20u
+#define HGSMIHOSTFLAGS_CURSOR_CAPABILITIES 0x40u
+
+struct hgsmi_host_flags {
+	u32 host_flags;
+	u32 reserved[3];
+} __packed;
+
+#endif

linux-7.2.3/drivers/gpu/drm/vboxvideo/hgsmi_channels.h

@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: MIT */
+/* Copyright (C) 2006-2017 Oracle Corporation */
+
+#ifndef __HGSMI_CHANNELS_H__
+#define __HGSMI_CHANNELS_H__
+
+/*
+ * Each channel has an 8 bit identifier. There are a number of predefined
+ * (hardcoded) channels.
+ *
+ * HGSMI_CH_HGSMI channel can be used to map a string channel identifier
+ * to a free 16 bit numerical value. values are allocated in range
+ * [HGSMI_CH_STRING_FIRST;HGSMI_CH_STRING_LAST].
+ */
+
+/* A reserved channel value */
+#define HGSMI_CH_RESERVED				0x00
+/* HGCMI: setup and configuration */
+#define HGSMI_CH_HGSMI					0x01
+/* Graphics: VBVA */
+#define HGSMI_CH_VBVA					0x02
+/* Graphics: Seamless with a single guest region */
+#define HGSMI_CH_SEAMLESS				0x03
+/* Graphics: Seamless with separate host windows */
+#define HGSMI_CH_SEAMLESS2				0x04
+/* Graphics: OpenGL HW acceleration */
+#define HGSMI_CH_OPENGL					0x05
+
+/* The first channel index to be used for string mappings (inclusive) */
+#define HGSMI_CH_STRING_FIRST				0x20
+/* The last channel index for string mappings (inclusive) */
+#define HGSMI_CH_STRING_LAST				0xff
+
+#endif

linux-7.2.3/drivers/gpu/drm/vboxvideo/hgsmi_defs.h

@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: MIT */
+/* Copyright (C) 2006-2017 Oracle Corporation */
+
+#ifndef __HGSMI_DEFS_H__
+#define __HGSMI_DEFS_H__
+
+/* Buffer sequence type mask. */
+#define HGSMI_BUFFER_HEADER_F_SEQ_MASK     0x03
+/* Single buffer, not a part of a sequence. */
+#define HGSMI_BUFFER_HEADER_F_SEQ_SINGLE   0x00
+/* The first buffer in a sequence. */
+#define HGSMI_BUFFER_HEADER_F_SEQ_START    0x01
+/* A middle buffer in a sequence. */
+#define HGSMI_BUFFER_HEADER_F_SEQ_CONTINUE 0x02
+/* The last buffer in a sequence. */
+#define HGSMI_BUFFER_HEADER_F_SEQ_END      0x03
+
+/* 16 bytes buffer header. */
+struct hgsmi_buffer_header {
+	u32 data_size;		/* Size of data that follows the header. */
+	u8 flags;		/* HGSMI_BUFFER_HEADER_F_* */
+	u8 channel;		/* The channel the data must be routed to. */
+	u16 channel_info;	/* Opaque to the HGSMI, used by the channel. */
+
+	union {
+		/* Opaque placeholder to make the union 8 bytes. */
+		u8 header_data[8];
+
+		/* HGSMI_BUFFER_HEADER_F_SEQ_SINGLE */
+		struct {
+			u32 reserved1;	/* A reserved field, initialize to 0. */
+			u32 reserved2;	/* A reserved field, initialize to 0. */
+		} buffer;
+
+		/* HGSMI_BUFFER_HEADER_F_SEQ_START */
+		struct {
+			/* Must be the same for all buffers in the sequence. */
+			u32 sequence_number;
+			/* The total size of the sequence. */
+			u32 sequence_size;
+		} sequence_start;
+
+		/*
+		 * HGSMI_BUFFER_HEADER_F_SEQ_CONTINUE and
+		 * HGSMI_BUFFER_HEADER_F_SEQ_END
+		 */
+		struct {
+			/* Must be the same for all buffers in the sequence. */
+			u32 sequence_number;
+			/* Data offset in the entire sequence. */
+			u32 sequence_offset;
+		} sequence_continue;
+	} u;
+} __packed;
+
+/* 8 bytes buffer tail. */
+struct hgsmi_buffer_tail {
+	/* Reserved, must be initialized to 0. */
+	u32 reserved;
+	/*
+	 * One-at-a-Time Hash: https://www.burtleburtle.net/bob/hash/doobs.html
+	 * Over the header, offset and for first 4 bytes of the tail.
+	 */
+	u32 checksum;
+} __packed;
+
+/*
+ * The size of the array of channels. Array indexes are u8.
+ * Note: the value must not be changed.
+ */
+#define HGSMI_NUMBER_OF_CHANNELS 0x100
+
+#endif

linux-7.2.3/drivers/gpu/drm/vboxvideo/modesetting.c

@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: MIT
+/* Copyright (C) 2006-2017 Oracle Corporation */
+
+#include <linux/vbox_err.h>
+#include "vbox_drv.h"
+#include "vboxvideo_guest.h"
+#include "vboxvideo_vbe.h"
+#include "hgsmi_channels.h"
+
+/**
+ * hgsmi_process_display_info - Set a video mode via an HGSMI request.
+ *                              The views must have been initialised first
+ *                              using @a VBoxHGSMISendViewInfo and if the mode
+ *                              is being set on the first display then it must
+ *                              be set first using registers.
+ * @ctx:           The context containing the heap to use.
+ * @display:       The screen number.
+ * @origin_x:      The horizontal displacement relative to the first scrn.
+ * @origin_y:      The vertical displacement relative to the first screen.
+ * @start_offset:  The offset of the visible area of the framebuffer
+ *                 relative to the framebuffer start.
+ * @pitch:         The offset in bytes between the starts of two adjecent
+ *                 scan lines in video RAM.
+ * @width:         The mode width.
+ * @height:        The mode height.
+ * @bpp:           The colour depth of the mode.
+ * @flags:         Flags.
+ */
+void hgsmi_process_display_info(struct gen_pool *ctx, u32 display,
+				s32 origin_x, s32 origin_y, u32 start_offset,
+				u32 pitch, u32 width, u32 height,
+				u16 bpp, u16 flags)
+{
+	struct vbva_infoscreen *p;
+
+	p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_VBVA,
+			       VBVA_INFO_SCREEN);
+	if (!p)
+		return;
+
+	p->view_index = display;
+	p->origin_x = origin_x;
+	p->origin_y = origin_y;
+	p->start_offset = start_offset;
+	p->line_size = pitch;
+	p->width = width;
+	p->height = height;
+	p->bits_per_pixel = bpp;
+	p->flags = flags;
+
+	hgsmi_buffer_submit(ctx, p);
+	hgsmi_buffer_free(ctx, p);
+}
+
+/**
+ * hgsmi_update_input_mapping - Report the rectangle relative to which absolute
+ *                              pointer events should be expressed.  This
+ *                              information remains valid until the next VBVA
+ *                              resize event for any screen, at which time it is
+ *                              reset to the bounding rectangle of all virtual
+ *                              screens.
+ * Return: 0 or negative errno value.
+ * @ctx:       The context containing the heap to use.
+ * @origin_x:  Upper left X co-ordinate relative to the first screen.
+ * @origin_y:  Upper left Y co-ordinate relative to the first screen.
+ * @width:     Rectangle width.
+ * @height:    Rectangle height.
+ */
+int hgsmi_update_input_mapping(struct gen_pool *ctx, s32 origin_x, s32 origin_y,
+			       u32 width, u32 height)
+{
+	struct vbva_report_input_mapping *p;
+
+	p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_VBVA,
+			       VBVA_REPORT_INPUT_MAPPING);
+	if (!p)
+		return -ENOMEM;
+
+	p->x = origin_x;
+	p->y = origin_y;
+	p->cx = width;
+	p->cy = height;
+
+	hgsmi_buffer_submit(ctx, p);
+	hgsmi_buffer_free(ctx, p);
+
+	return 0;
+}
+
+/**
+ * hgsmi_get_mode_hints - Get most recent video mode hints.
+ * Return: 0 or negative errno value.
+ * @ctx:      The context containing the heap to use.
+ * @screens:  The number of screens to query hints for, starting at 0.
+ * @hints:    Array of vbva_modehint structures for receiving the hints.
+ */
+int hgsmi_get_mode_hints(struct gen_pool *ctx, unsigned int screens,
+			 struct vbva_modehint *hints)
+{
+	struct vbva_query_mode_hints *p;
+	size_t size;
+
+	if (WARN_ON(!hints))
+		return -EINVAL;
+
+	size = screens * sizeof(struct vbva_modehint);
+	p = hgsmi_buffer_alloc(ctx, sizeof(*p) + size, HGSMI_CH_VBVA,
+			       VBVA_QUERY_MODE_HINTS);
+	if (!p)
+		return -ENOMEM;
+
+	p->hints_queried_count = screens;
+	p->hint_structure_guest_size = sizeof(struct vbva_modehint);
+	p->rc = VERR_NOT_SUPPORTED;
+
+	hgsmi_buffer_submit(ctx, p);
+
+	if (p->rc < 0) {
+		hgsmi_buffer_free(ctx, p);
+		return -EIO;
+	}
+
+	memcpy(hints, ((u8 *)p) + sizeof(struct vbva_query_mode_hints), size);
+	hgsmi_buffer_free(ctx, p);
+
+	return 0;
+}

linux-7.2.3/drivers/gpu/drm/vboxvideo/vbox_drv.c

@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright (C) 2013-2017 Oracle Corporation
+ * This file is based on ast_drv.c
+ * Copyright 2012 Red Hat Inc.
+ * Authors: Dave Airlie <airlied@redhat.com>
+ *          Michael Thayer <michael.thayer@oracle.com,
+ *          Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/aperture.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/vt_kern.h>
+
+#include <drm/clients/drm_client_setup.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fbdev_ttm.h>
+#include <drm/drm_file.h>
+#include <drm/drm_ioctl.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_modeset_helper.h>
+#include <drm/drm_module.h>
+
+#include "vbox_drv.h"
+
+static int vbox_modeset = -1;
+
+MODULE_PARM_DESC(modeset, "Disable/Enable modesetting");
+module_param_named(modeset, vbox_modeset, int, 0400);
+
+static const struct drm_driver driver;
+
+static const struct pci_device_id pciidlist[] = {
+	{ PCI_DEVICE(0x80ee, 0xbeef) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, pciidlist);
+
+static int vbox_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct vbox_private *vbox;
+	int ret = 0;
+
+	if (!vbox_check_supported(VBE_DISPI_ID_HGSMI))
+		return -ENODEV;
+
+	ret = aperture_remove_conflicting_pci_devices(pdev, driver.name);
+	if (ret)
+		return ret;
+
+	vbox = devm_drm_dev_alloc(&pdev->dev, &driver,
+				  struct vbox_private, ddev);
+	if (IS_ERR(vbox))
+		return PTR_ERR(vbox);
+
+	pci_set_drvdata(pdev, vbox);
+	mutex_init(&vbox->hw_mutex);
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	ret = vbox_hw_init(vbox);
+	if (ret)
+		return ret;
+
+	ret = vbox_mm_init(vbox);
+	if (ret)
+		goto err_hw_fini;
+
+	ret = vbox_mode_init(vbox);
+	if (ret)
+		goto err_hw_fini;
+
+	ret = vbox_irq_init(vbox);
+	if (ret)
+		goto err_mode_fini;
+
+	ret = drm_dev_register(&vbox->ddev, 0);
+	if (ret)
+		goto err_irq_fini;
+
+	drm_client_setup(&vbox->ddev, NULL);
+
+	return 0;
+
+err_irq_fini:
+	vbox_irq_fini(vbox);
+err_mode_fini:
+	vbox_mode_fini(vbox);
+err_hw_fini:
+	vbox_hw_fini(vbox);
+	return ret;
+}
+
+static void vbox_pci_remove(struct pci_dev *pdev)
+{
+	struct vbox_private *vbox = pci_get_drvdata(pdev);
+
+	drm_dev_unregister(&vbox->ddev);
+	drm_atomic_helper_shutdown(&vbox->ddev);
+	vbox_irq_fini(vbox);
+	vbox_mode_fini(vbox);
+	vbox_hw_fini(vbox);
+}
+
+static void vbox_pci_shutdown(struct pci_dev *pdev)
+{
+	struct vbox_private *vbox = pci_get_drvdata(pdev);
+
+	drm_atomic_helper_shutdown(&vbox->ddev);
+}
+
+static int vbox_pm_suspend(struct device *dev)
+{
+	struct vbox_private *vbox = dev_get_drvdata(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	int error;
+
+	error = drm_mode_config_helper_suspend(&vbox->ddev);
+	if (error)
+		return error;
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+
+static int vbox_pm_resume(struct device *dev)
+{
+	struct vbox_private *vbox = dev_get_drvdata(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	if (pci_enable_device(pdev))
+		return -EIO;
+
+	return drm_mode_config_helper_resume(&vbox->ddev);
+}
+
+static int vbox_pm_freeze(struct device *dev)
+{
+	struct vbox_private *vbox = dev_get_drvdata(dev);
+
+	return drm_mode_config_helper_suspend(&vbox->ddev);
+}
+
+static int vbox_pm_thaw(struct device *dev)
+{
+	struct vbox_private *vbox = dev_get_drvdata(dev);
+
+	return drm_mode_config_helper_resume(&vbox->ddev);
+}
+
+static int vbox_pm_poweroff(struct device *dev)
+{
+	struct vbox_private *vbox = dev_get_drvdata(dev);
+
+	return drm_mode_config_helper_suspend(&vbox->ddev);
+}
+
+static const struct dev_pm_ops vbox_pm_ops = {
+	.suspend = vbox_pm_suspend,
+	.resume = vbox_pm_resume,
+	.freeze = vbox_pm_freeze,
+	.thaw = vbox_pm_thaw,
+	.poweroff = vbox_pm_poweroff,
+	.restore = vbox_pm_resume,
+};
+
+static struct pci_driver vbox_pci_driver = {
+	.name = DRIVER_NAME,
+	.id_table = pciidlist,
+	.probe = vbox_pci_probe,
+	.remove = vbox_pci_remove,
+	.shutdown = vbox_pci_shutdown,
+	.driver.pm = pm_sleep_ptr(&vbox_pm_ops),
+};
+
+DEFINE_DRM_GEM_FOPS(vbox_fops);
+
+static const struct drm_driver driver = {
+	.driver_features =
+	    DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC | DRIVER_CURSOR_HOTSPOT,
+
+	.fops = &vbox_fops,
+	.name = DRIVER_NAME,
+	.desc = DRIVER_DESC,
+	.major = DRIVER_MAJOR,
+	.minor = DRIVER_MINOR,
+	.patchlevel = DRIVER_PATCHLEVEL,
+
+	DRM_GEM_VRAM_DRIVER,
+	DRM_FBDEV_TTM_DRIVER_OPS,
+};
+
+drm_module_pci_driver_if_modeset(vbox_pci_driver, vbox_modeset);
+
+MODULE_AUTHOR("Oracle Corporation");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL and additional rights");

linux-7.2.3/drivers/gpu/drm/vboxvideo/vbox_drv.h

@@ -0,0 +1,159 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright (C) 2013-2017 Oracle Corporation
+ * This file is based on ast_drv.h
+ * Copyright 2012 Red Hat Inc.
+ * Authors: Dave Airlie <airlied@redhat.com>
+ *          Michael Thayer <michael.thayer@oracle.com,
+ *          Hans de Goede <hdegoede@redhat.com>
+ */
+#ifndef __VBOX_DRV_H__
+#define __VBOX_DRV_H__
+
+#include <linux/genalloc.h>
+#include <linux/io.h>
+#include <linux/irqreturn.h>
+#include <linux/string.h>
+
+#include <drm/drm_encoder.h>
+#include <drm/drm_gem.h>
+#include <drm/drm_gem_vram_helper.h>
+
+#include "vboxvideo_guest.h"
+#include "vboxvideo_vbe.h"
+#include "hgsmi_ch_setup.h"
+
+#define DRIVER_NAME         "vboxvideo"
+#define DRIVER_DESC         "Oracle VM VirtualBox Graphics Card"
+
+#define DRIVER_MAJOR        1
+#define DRIVER_MINOR        0
+#define DRIVER_PATCHLEVEL   0
+
+#define VBOX_MAX_CURSOR_WIDTH  64
+#define VBOX_MAX_CURSOR_HEIGHT 64
+#define CURSOR_PIXEL_COUNT (VBOX_MAX_CURSOR_WIDTH * VBOX_MAX_CURSOR_HEIGHT)
+#define CURSOR_DATA_SIZE (CURSOR_PIXEL_COUNT * 4 + CURSOR_PIXEL_COUNT / 8)
+
+#define VBOX_MAX_SCREENS  32
+
+#define GUEST_HEAP_OFFSET(vbox) ((vbox)->full_vram_size - \
+				 VBVA_ADAPTER_INFORMATION_SIZE)
+#define GUEST_HEAP_SIZE   VBVA_ADAPTER_INFORMATION_SIZE
+#define GUEST_HEAP_USABLE_SIZE (VBVA_ADAPTER_INFORMATION_SIZE - \
+				sizeof(struct hgsmi_host_flags))
+#define HOST_FLAGS_OFFSET GUEST_HEAP_USABLE_SIZE
+
+struct vbox_private {
+	/* Must be first; or we must define our own release callback */
+	struct drm_device ddev;
+
+	u8 __iomem *guest_heap;
+	u8 __iomem *vbva_buffers;
+	struct gen_pool *guest_pool;
+	struct vbva_buf_ctx *vbva_info;
+	bool any_pitch;
+	u32 num_crtcs;
+	/* Amount of available VRAM, including space used for buffers. */
+	u32 full_vram_size;
+	/* Amount of available VRAM, not including space used for buffers. */
+	u32 available_vram_size;
+	/* Array of structures for receiving mode hints. */
+	struct vbva_modehint *last_mode_hints;
+
+	int fb_mtrr;
+
+	struct mutex hw_mutex; /* protects modeset and accel/vbva accesses */
+	struct work_struct hotplug_work;
+	u32 input_mapping_width;
+	u32 input_mapping_height;
+	/*
+	 * Is user-space using an X.Org-style layout of one large frame-buffer
+	 * encompassing all screen ones or is the fbdev console active?
+	 */
+	bool single_framebuffer;
+	u8 cursor_data[CURSOR_DATA_SIZE];
+};
+
+#undef CURSOR_PIXEL_COUNT
+#undef CURSOR_DATA_SIZE
+
+struct vbox_connector {
+	struct drm_connector base;
+	char name[32];
+	struct vbox_crtc *vbox_crtc;
+	struct {
+		u32 width;
+		u32 height;
+		bool disconnected;
+	} mode_hint;
+};
+
+struct vbox_crtc {
+	struct drm_crtc base;
+	bool disconnected;
+	unsigned int crtc_id;
+	u32 fb_offset;
+	bool cursor_enabled;
+	u32 x_hint;
+	u32 y_hint;
+	/*
+	 * When setting a mode we not only pass the mode to the hypervisor,
+	 * but also information on how to map / translate input coordinates
+	 * for the emulated USB tablet.  This input-mapping may change when
+	 * the mode on *another* crtc changes.
+	 *
+	 * This means that sometimes we must do a modeset on other crtc-s then
+	 * the one being changed to update the input-mapping. Including crtc-s
+	 * which may be disabled inside the guest (shown as a black window
+	 * on the host unless closed by the user).
+	 *
+	 * With atomic modesetting the mode-info of disabled crtcs gets zeroed
+	 * yet we need it when updating the input-map to avoid resizing the
+	 * window as a side effect of a mode_set on another crtc. Therefor we
+	 * cache the info of the last mode below.
+	 */
+	u32 width;
+	u32 height;
+	u32 x;
+	u32 y;
+};
+
+struct vbox_encoder {
+	struct drm_encoder base;
+};
+
+#define to_vbox_crtc(x) container_of(x, struct vbox_crtc, base)
+#define to_vbox_connector(x) container_of(x, struct vbox_connector, base)
+#define to_vbox_encoder(x) container_of(x, struct vbox_encoder, base)
+#define to_vbox_dev(x) container_of(x, struct vbox_private, ddev)
+
+bool vbox_check_supported(u16 id);
+int vbox_hw_init(struct vbox_private *vbox);
+void vbox_hw_fini(struct vbox_private *vbox);
+
+int vbox_mode_init(struct vbox_private *vbox);
+void vbox_mode_fini(struct vbox_private *vbox);
+
+void vbox_report_caps(struct vbox_private *vbox);
+
+int vbox_mm_init(struct vbox_private *vbox);
+
+/* vbox_irq.c */
+int vbox_irq_init(struct vbox_private *vbox);
+void vbox_irq_fini(struct vbox_private *vbox);
+void vbox_report_hotplug(struct vbox_private *vbox);
+
+/* vbox_hgsmi.c */
+void *hgsmi_buffer_alloc(struct gen_pool *guest_pool, size_t size,
+			 u8 channel, u16 channel_info);
+void hgsmi_buffer_free(struct gen_pool *guest_pool, void *buf);
+int hgsmi_buffer_submit(struct gen_pool *guest_pool, void *buf);
+
+static inline void vbox_write_ioport(u16 index, u16 data)
+{
+	outw(index, VBE_DISPI_IOPORT_INDEX);
+	outw(data, VBE_DISPI_IOPORT_DATA);
+}
+
+#endif

linux-7.2.3/drivers/gpu/drm/vboxvideo/vbox_hgsmi.c

@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright (C) 2017 Oracle Corporation
+ * Authors: Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include "vbox_drv.h"
+#include "vboxvideo_vbe.h"
+#include "hgsmi_defs.h"
+
+/* One-at-a-Time Hash from https://www.burtleburtle.net/bob/hash/doobs.html */
+static u32 hgsmi_hash_process(u32 hash, const u8 *data, int size)
+{
+	while (size--) {
+		hash += *data++;
+		hash += (hash << 10);
+		hash ^= (hash >> 6);
+	}
+
+	return hash;
+}
+
+static u32 hgsmi_hash_end(u32 hash)
+{
+	hash += (hash << 3);
+	hash ^= (hash >> 11);
+	hash += (hash << 15);
+
+	return hash;
+}
+
+/* Not really a checksum but that is the naming used in all vbox code */
+static u32 hgsmi_checksum(u32 offset,
+			  const struct hgsmi_buffer_header *header,
+			  const struct hgsmi_buffer_tail *tail)
+{
+	u32 checksum;
+
+	checksum = hgsmi_hash_process(0, (u8 *)&offset, sizeof(offset));
+	checksum = hgsmi_hash_process(checksum, (u8 *)header, sizeof(*header));
+	/* 4 -> Do not checksum the checksum itself */
+	checksum = hgsmi_hash_process(checksum, (u8 *)tail, 4);
+
+	return hgsmi_hash_end(checksum);
+}
+
+void *hgsmi_buffer_alloc(struct gen_pool *guest_pool, size_t size,
+			 u8 channel, u16 channel_info)
+{
+	struct hgsmi_buffer_header *h;
+	struct hgsmi_buffer_tail *t;
+	size_t total_size;
+	dma_addr_t offset;
+
+	total_size = size + sizeof(*h) + sizeof(*t);
+	h = gen_pool_dma_alloc(guest_pool, total_size, &offset);
+	if (!h)
+		return NULL;
+
+	t = (struct hgsmi_buffer_tail *)((u8 *)h + sizeof(*h) + size);
+
+	h->flags = HGSMI_BUFFER_HEADER_F_SEQ_SINGLE;
+	h->data_size = size;
+	h->channel = channel;
+	h->channel_info = channel_info;
+	memset(&h->u.header_data, 0, sizeof(h->u.header_data));
+
+	t->reserved = 0;
+	t->checksum = hgsmi_checksum(offset, h, t);
+
+	return (u8 *)h + sizeof(*h);
+}
+
+void hgsmi_buffer_free(struct gen_pool *guest_pool, void *buf)
+{
+	struct hgsmi_buffer_header *h =
+		(struct hgsmi_buffer_header *)((u8 *)buf - sizeof(*h));
+	size_t total_size = h->data_size + sizeof(*h) +
+					     sizeof(struct hgsmi_buffer_tail);
+
+	gen_pool_free(guest_pool, (unsigned long)h, total_size);
+}
+
+int hgsmi_buffer_submit(struct gen_pool *guest_pool, void *buf)
+{
+	phys_addr_t offset;
+
+	offset = gen_pool_virt_to_phys(guest_pool, (unsigned long)buf -
+				       sizeof(struct hgsmi_buffer_header));
+	outl(offset, VGA_PORT_HGSMI_GUEST);
+	/* Make the compiler aware that the host has changed memory. */
+	mb();
+
+	return 0;
+}

linux-7.2.3/drivers/gpu/drm/vboxvideo/vbox_irq.c

@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright (C) 2016-2017 Oracle Corporation
+ * This file is based on qxl_irq.c
+ * Copyright 2013 Red Hat Inc.
+ * Authors: Dave Airlie
+ *          Alon Levy
+ *          Michael Thayer <michael.thayer@oracle.com,
+ *          Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/pci.h>
+
+#include <drm/drm_drv.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+#include "vbox_drv.h"
+#include "vboxvideo.h"
+
+static void vbox_clear_irq(void)
+{
+	outl((u32)~0, VGA_PORT_HGSMI_HOST);
+}
+
+static u32 vbox_get_flags(struct vbox_private *vbox)
+{
+	return readl(vbox->guest_heap + HOST_FLAGS_OFFSET);
+}
+
+void vbox_report_hotplug(struct vbox_private *vbox)
+{
+	schedule_work(&vbox->hotplug_work);
+}
+
+static irqreturn_t vbox_irq_handler(int irq, void *arg)
+{
+	struct drm_device *dev = (struct drm_device *)arg;
+	struct vbox_private *vbox = to_vbox_dev(dev);
+	u32 host_flags = vbox_get_flags(vbox);
+
+	if (!(host_flags & HGSMIHOSTFLAGS_IRQ))
+		return IRQ_NONE;
+
+	/*
+	 * Due to a bug in the initial host implementation of hot-plug irqs,
+	 * the hot-plug and cursor capability flags were never cleared.
+	 * Fortunately we can tell when they would have been set by checking
+	 * that the VSYNC flag is not set.
+	 */
+	if (host_flags &
+	    (HGSMIHOSTFLAGS_HOTPLUG | HGSMIHOSTFLAGS_CURSOR_CAPABILITIES) &&
+	    !(host_flags & HGSMIHOSTFLAGS_VSYNC))
+		vbox_report_hotplug(vbox);
+
+	vbox_clear_irq();
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Check that the position hints provided by the host are suitable for GNOME
+ * shell (i.e. all screens disjoint and hints for all enabled screens) and if
+ * not replace them with default ones.  Providing valid hints improves the
+ * chances that we will get a known screen layout for pointer mapping.
+ */
+static void validate_or_set_position_hints(struct vbox_private *vbox)
+{
+	struct vbva_modehint *hintsi, *hintsj;
+	bool valid = true;
+	u16 currentx = 0;
+	int i, j;
+
+	for (i = 0; i < vbox->num_crtcs; ++i) {
+		for (j = 0; j < i; ++j) {
+			hintsi = &vbox->last_mode_hints[i];
+			hintsj = &vbox->last_mode_hints[j];
+
+			if (hintsi->enabled && hintsj->enabled) {
+				if (hintsi->dx >= 0xffff ||
+				    hintsi->dy >= 0xffff ||
+				    hintsj->dx >= 0xffff ||
+				    hintsj->dy >= 0xffff ||
+				    (hintsi->dx <
+					hintsj->dx + (hintsj->cx & 0x8fff) &&
+				     hintsi->dx + (hintsi->cx & 0x8fff) >
+					hintsj->dx) ||
+				    (hintsi->dy <
+					hintsj->dy + (hintsj->cy & 0x8fff) &&
+				     hintsi->dy + (hintsi->cy & 0x8fff) >
+					hintsj->dy))
+					valid = false;
+			}
+		}
+	}
+	if (!valid)
+		for (i = 0; i < vbox->num_crtcs; ++i) {
+			if (vbox->last_mode_hints[i].enabled) {
+				vbox->last_mode_hints[i].dx = currentx;
+				vbox->last_mode_hints[i].dy = 0;
+				currentx +=
+				    vbox->last_mode_hints[i].cx & 0x8fff;
+			}
+		}
+}
+
+/* Query the host for the most recent video mode hints. */
+static void vbox_update_mode_hints(struct vbox_private *vbox)
+{
+	struct drm_connector_list_iter conn_iter;
+	struct drm_device *dev = &vbox->ddev;
+	struct drm_connector *connector;
+	struct vbox_connector *vbox_conn;
+	struct vbva_modehint *hints;
+	u16 flags;
+	bool disconnected;
+	unsigned int crtc_id;
+	int ret;
+
+	ret = hgsmi_get_mode_hints(vbox->guest_pool, vbox->num_crtcs,
+				   vbox->last_mode_hints);
+	if (ret) {
+		DRM_ERROR("vboxvideo: hgsmi_get_mode_hints failed: %d\n", ret);
+		return;
+	}
+
+	validate_or_set_position_hints(vbox);
+
+	drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
+		vbox_conn = to_vbox_connector(connector);
+
+		hints = &vbox->last_mode_hints[vbox_conn->vbox_crtc->crtc_id];
+		if (hints->magic != VBVAMODEHINT_MAGIC)
+			continue;
+
+		disconnected = !(hints->enabled);
+		crtc_id = vbox_conn->vbox_crtc->crtc_id;
+		vbox_conn->mode_hint.width = hints->cx;
+		vbox_conn->mode_hint.height = hints->cy;
+		vbox_conn->vbox_crtc->x_hint = hints->dx;
+		vbox_conn->vbox_crtc->y_hint = hints->dy;
+		vbox_conn->mode_hint.disconnected = disconnected;
+
+		if (vbox_conn->vbox_crtc->disconnected == disconnected)
+			continue;
+
+		if (disconnected)
+			flags = VBVA_SCREEN_F_ACTIVE | VBVA_SCREEN_F_DISABLED;
+		else
+			flags = VBVA_SCREEN_F_ACTIVE | VBVA_SCREEN_F_BLANK;
+
+		hgsmi_process_display_info(vbox->guest_pool, crtc_id, 0, 0, 0,
+					   hints->cx * 4, hints->cx,
+					   hints->cy, 0, flags);
+
+		vbox_conn->vbox_crtc->disconnected = disconnected;
+	}
+	drm_connector_list_iter_end(&conn_iter);
+	drm_modeset_unlock(&dev->mode_config.connection_mutex);
+}
+
+static void vbox_hotplug_worker(struct work_struct *work)
+{
+	struct vbox_private *vbox = container_of(work, struct vbox_private,
+						 hotplug_work);
+
+	vbox_update_mode_hints(vbox);
+	drm_kms_helper_hotplug_event(&vbox->ddev);
+}
+
+int vbox_irq_init(struct vbox_private *vbox)
+{
+	struct drm_device *dev = &vbox->ddev;
+	struct pci_dev *pdev = to_pci_dev(dev->dev);
+
+	INIT_WORK(&vbox->hotplug_work, vbox_hotplug_worker);
+	vbox_update_mode_hints(vbox);
+
+	/* PCI devices require shared interrupts. */
+	return request_irq(pdev->irq, vbox_irq_handler, IRQF_SHARED, dev->driver->name, dev);
+}
+
+void vbox_irq_fini(struct vbox_private *vbox)
+{
+	struct drm_device *dev = &vbox->ddev;
+	struct pci_dev *pdev = to_pci_dev(dev->dev);
+
+	free_irq(pdev->irq, dev);
+	flush_work(&vbox->hotplug_work);
+}

linux-7.2.3/drivers/gpu/drm/vboxvideo/vbox_main.c

@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright (C) 2013-2017 Oracle Corporation
+ * This file is based on ast_main.c
+ * Copyright 2012 Red Hat Inc.
+ * Authors: Dave Airlie <airlied@redhat.com>,
+ *          Michael Thayer <michael.thayer@oracle.com,
+ *          Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/pci.h>
+#include <linux/vbox_err.h>
+
+#include <drm/drm_damage_helper.h>
+#include <drm/drm_print.h>
+
+#include "vbox_drv.h"
+#include "vboxvideo_guest.h"
+#include "vboxvideo_vbe.h"
+
+void vbox_report_caps(struct vbox_private *vbox)
+{
+	u32 caps = VBVACAPS_DISABLE_CURSOR_INTEGRATION |
+		   VBVACAPS_IRQ | VBVACAPS_USE_VBVA_ONLY;
+
+	/* The host only accepts VIDEO_MODE_HINTS if it is send separately. */
+	hgsmi_send_caps_info(vbox->guest_pool, caps);
+	caps |= VBVACAPS_VIDEO_MODE_HINTS;
+	hgsmi_send_caps_info(vbox->guest_pool, caps);
+}
+
+static int vbox_accel_init(struct vbox_private *vbox)
+{
+	struct pci_dev *pdev = to_pci_dev(vbox->ddev.dev);
+	struct vbva_buffer *vbva;
+	unsigned int i;
+
+	vbox->vbva_info = devm_kcalloc(vbox->ddev.dev, vbox->num_crtcs,
+				       sizeof(*vbox->vbva_info), GFP_KERNEL);
+	if (!vbox->vbva_info)
+		return -ENOMEM;
+
+	/* Take a command buffer for each screen from the end of usable VRAM. */
+	vbox->available_vram_size -= vbox->num_crtcs * VBVA_MIN_BUFFER_SIZE;
+
+	vbox->vbva_buffers = pcim_iomap_range(
+			pdev, 0, vbox->available_vram_size,
+			vbox->num_crtcs * VBVA_MIN_BUFFER_SIZE);
+	if (IS_ERR(vbox->vbva_buffers))
+		return PTR_ERR(vbox->vbva_buffers);
+
+	for (i = 0; i < vbox->num_crtcs; ++i) {
+		vbva_setup_buffer_context(&vbox->vbva_info[i],
+					  vbox->available_vram_size +
+					  i * VBVA_MIN_BUFFER_SIZE,
+					  VBVA_MIN_BUFFER_SIZE);
+		vbva = (void __force *)vbox->vbva_buffers +
+			i * VBVA_MIN_BUFFER_SIZE;
+		if (!vbva_enable(&vbox->vbva_info[i],
+				 vbox->guest_pool, vbva, i)) {
+			/* very old host or driver error. */
+			DRM_ERROR("vboxvideo: vbva_enable failed\n");
+		}
+	}
+
+	return 0;
+}
+
+static void vbox_accel_fini(struct vbox_private *vbox)
+{
+	unsigned int i;
+
+	for (i = 0; i < vbox->num_crtcs; ++i)
+		vbva_disable(&vbox->vbva_info[i], vbox->guest_pool, i);
+}
+
+/* Do we support the 4.3 plus mode hint reporting interface? */
+static bool have_hgsmi_mode_hints(struct vbox_private *vbox)
+{
+	u32 have_hints, have_cursor;
+	int ret;
+
+	ret = hgsmi_query_conf(vbox->guest_pool,
+			       VBOX_VBVA_CONF32_MODE_HINT_REPORTING,
+			       &have_hints);
+	if (ret)
+		return false;
+
+	ret = hgsmi_query_conf(vbox->guest_pool,
+			       VBOX_VBVA_CONF32_GUEST_CURSOR_REPORTING,
+			       &have_cursor);
+	if (ret)
+		return false;
+
+	return have_hints == VINF_SUCCESS && have_cursor == VINF_SUCCESS;
+}
+
+bool vbox_check_supported(u16 id)
+{
+	u16 dispi_id;
+
+	vbox_write_ioport(VBE_DISPI_INDEX_ID, id);
+	dispi_id = inw(VBE_DISPI_IOPORT_DATA);
+
+	return dispi_id == id;
+}
+
+int vbox_hw_init(struct vbox_private *vbox)
+{
+	struct pci_dev *pdev = to_pci_dev(vbox->ddev.dev);
+	int ret = -ENOMEM;
+
+	vbox->full_vram_size = inl(VBE_DISPI_IOPORT_DATA);
+	vbox->any_pitch = vbox_check_supported(VBE_DISPI_ID_ANYX);
+
+	DRM_INFO("VRAM %08x\n", vbox->full_vram_size);
+
+	ret = pcim_request_region(pdev, 0, "vboxvideo");
+	if (ret)
+		return ret;
+
+	/* Map guest-heap at end of vram */
+	vbox->guest_heap = pcim_iomap_range(pdev, 0,
+			GUEST_HEAP_OFFSET(vbox), GUEST_HEAP_SIZE);
+	if (IS_ERR(vbox->guest_heap))
+		return PTR_ERR(vbox->guest_heap);
+
+	/* Create guest-heap mem-pool use 2^4 = 16 byte chunks */
+	vbox->guest_pool = devm_gen_pool_create(vbox->ddev.dev, 4, -1,
+						"vboxvideo-accel");
+	if (IS_ERR(vbox->guest_pool))
+		return PTR_ERR(vbox->guest_pool);
+
+	ret = gen_pool_add_virt(vbox->guest_pool,
+				(unsigned long)vbox->guest_heap,
+				GUEST_HEAP_OFFSET(vbox),
+				GUEST_HEAP_USABLE_SIZE, -1);
+	if (ret)
+		return ret;
+
+	ret = hgsmi_test_query_conf(vbox->guest_pool);
+	if (ret) {
+		DRM_ERROR("vboxvideo: hgsmi_test_query_conf failed\n");
+		return ret;
+	}
+
+	/* Reduce available VRAM size to reflect the guest heap. */
+	vbox->available_vram_size = GUEST_HEAP_OFFSET(vbox);
+	/* Linux drm represents monitors as a 32-bit array. */
+	hgsmi_query_conf(vbox->guest_pool, VBOX_VBVA_CONF32_MONITOR_COUNT,
+			 &vbox->num_crtcs);
+	vbox->num_crtcs = clamp_t(u32, vbox->num_crtcs, 1, VBOX_MAX_SCREENS);
+
+	if (!have_hgsmi_mode_hints(vbox)) {
+		ret = -ENOTSUPP;
+		return ret;
+	}
+
+	vbox->last_mode_hints = devm_kcalloc(vbox->ddev.dev, vbox->num_crtcs,
+					     sizeof(struct vbva_modehint),
+					     GFP_KERNEL);
+	if (!vbox->last_mode_hints)
+		return -ENOMEM;
+
+	ret = vbox_accel_init(vbox);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+void vbox_hw_fini(struct vbox_private *vbox)
+{
+	vbox_accel_fini(vbox);
+}

linux-7.2.3/drivers/gpu/drm/vboxvideo/vbox_mode.c

@@ -0,0 +1,887 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright (C) 2013-2017 Oracle Corporation
+ * This file is based on ast_mode.c
+ * Copyright 2012 Red Hat Inc.
+ * Parts based on xf86-video-ast
+ * Copyright (c) 2005 ASPEED Technology Inc.
+ * Authors: Dave Airlie <airlied@redhat.com>
+ *          Michael Thayer <michael.thayer@oracle.com,
+ *          Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/iosys-map.h>
+#include <linux/export.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+#include "hgsmi_channels.h"
+#include "vbox_drv.h"
+#include "vboxvideo.h"
+
+/*
+ * Set a graphics mode.  Poke any required values into registers, do an HGSMI
+ * mode set and tell the host we support advanced graphics functions.
+ */
+static void vbox_do_modeset(struct drm_crtc *crtc)
+{
+	struct drm_framebuffer *fb = crtc->primary->state->fb;
+	struct vbox_crtc *vbox_crtc = to_vbox_crtc(crtc);
+	struct vbox_private *vbox;
+	int width, height, bpp, pitch;
+	u16 flags;
+	s32 x_offset, y_offset;
+
+	vbox = to_vbox_dev(crtc->dev);
+	width = vbox_crtc->width ? vbox_crtc->width : 640;
+	height = vbox_crtc->height ? vbox_crtc->height : 480;
+	bpp = fb ? fb->format->cpp[0] * 8 : 32;
+	pitch = fb ? fb->pitches[0] : width * bpp / 8;
+	x_offset = vbox->single_framebuffer ? vbox_crtc->x : vbox_crtc->x_hint;
+	y_offset = vbox->single_framebuffer ? vbox_crtc->y : vbox_crtc->y_hint;
+
+	/*
+	 * This is the old way of setting graphics modes.  It assumed one screen
+	 * and a frame-buffer at the start of video RAM.  On older versions of
+	 * VirtualBox, certain parts of the code still assume that the first
+	 * screen is programmed this way, so try to fake it.
+	 */
+	if (vbox_crtc->crtc_id == 0 && fb &&
+	    vbox_crtc->fb_offset / pitch < 0xffff - crtc->y &&
+	    vbox_crtc->fb_offset % (bpp / 8) == 0) {
+		vbox_write_ioport(VBE_DISPI_INDEX_XRES, width);
+		vbox_write_ioport(VBE_DISPI_INDEX_YRES, height);
+		vbox_write_ioport(VBE_DISPI_INDEX_VIRT_WIDTH, pitch * 8 / bpp);
+		vbox_write_ioport(VBE_DISPI_INDEX_BPP, bpp);
+		vbox_write_ioport(VBE_DISPI_INDEX_ENABLE, VBE_DISPI_ENABLED);
+		vbox_write_ioport(VBE_DISPI_INDEX_X_OFFSET,
+			vbox_crtc->fb_offset % pitch / bpp * 8 + vbox_crtc->x);
+		vbox_write_ioport(VBE_DISPI_INDEX_Y_OFFSET,
+				  vbox_crtc->fb_offset / pitch + vbox_crtc->y);
+	}
+
+	flags = VBVA_SCREEN_F_ACTIVE;
+	flags |= (fb && crtc->state->enable) ? 0 : VBVA_SCREEN_F_BLANK;
+	flags |= vbox_crtc->disconnected ? VBVA_SCREEN_F_DISABLED : 0;
+	hgsmi_process_display_info(vbox->guest_pool, vbox_crtc->crtc_id,
+				   x_offset, y_offset,
+				   vbox_crtc->x * bpp / 8 +
+							vbox_crtc->y * pitch,
+				   pitch, width, height, bpp, flags);
+}
+
+static int vbox_set_view(struct drm_crtc *crtc)
+{
+	struct vbox_crtc *vbox_crtc = to_vbox_crtc(crtc);
+	struct vbox_private *vbox = to_vbox_dev(crtc->dev);
+	struct vbva_infoview *p;
+
+	/*
+	 * Tell the host about the view.  This design originally targeted the
+	 * Windows XP driver architecture and assumed that each screen would
+	 * have a dedicated frame buffer with the command buffer following it,
+	 * the whole being a "view".  The host works out which screen a command
+	 * buffer belongs to by checking whether it is in the first view, then
+	 * whether it is in the second and so on.  The first match wins.  We
+	 * cheat around this by making the first view be the managed memory
+	 * plus the first command buffer, the second the same plus the second
+	 * buffer and so on.
+	 */
+	p = hgsmi_buffer_alloc(vbox->guest_pool, sizeof(*p),
+			       HGSMI_CH_VBVA, VBVA_INFO_VIEW);
+	if (!p)
+		return -ENOMEM;
+
+	p->view_index = vbox_crtc->crtc_id;
+	p->view_offset = vbox_crtc->fb_offset;
+	p->view_size = vbox->available_vram_size - vbox_crtc->fb_offset +
+		       vbox_crtc->crtc_id * VBVA_MIN_BUFFER_SIZE;
+	p->max_screen_size = vbox->available_vram_size - vbox_crtc->fb_offset;
+
+	hgsmi_buffer_submit(vbox->guest_pool, p);
+	hgsmi_buffer_free(vbox->guest_pool, p);
+
+	return 0;
+}
+
+/*
+ * Try to map the layout of virtual screens to the range of the input device.
+ * Return true if we need to re-set the crtc modes due to screen offset
+ * changes.
+ */
+static bool vbox_set_up_input_mapping(struct vbox_private *vbox)
+{
+	struct drm_crtc *crtci;
+	struct drm_connector *connectori;
+	struct drm_framebuffer *fb, *fb1 = NULL;
+	bool single_framebuffer = true;
+	bool old_single_framebuffer = vbox->single_framebuffer;
+	u16 width = 0, height = 0;
+
+	/*
+	 * Are we using an X.Org-style single large frame-buffer for all crtcs?
+	 * If so then screen layout can be deduced from the crtc offsets.
+	 * Same fall-back if this is the fbdev frame-buffer.
+	 */
+	list_for_each_entry(crtci, &vbox->ddev.mode_config.crtc_list, head) {
+		fb = crtci->primary->state->fb;
+		if (!fb)
+			continue;
+
+		if (!fb1) {
+			fb1 = fb;
+			if (fb1 == vbox->ddev.fb_helper->fb)
+				break;
+		} else if (fb != fb1) {
+			single_framebuffer = false;
+		}
+	}
+	if (!fb1)
+		return false;
+
+	if (single_framebuffer) {
+		vbox->single_framebuffer = true;
+		vbox->input_mapping_width = fb1->width;
+		vbox->input_mapping_height = fb1->height;
+		return old_single_framebuffer != vbox->single_framebuffer;
+	}
+	/* Otherwise calculate the total span of all screens. */
+	list_for_each_entry(connectori, &vbox->ddev.mode_config.connector_list,
+			    head) {
+		struct vbox_connector *vbox_connector =
+		    to_vbox_connector(connectori);
+		struct vbox_crtc *vbox_crtc = vbox_connector->vbox_crtc;
+
+		width = max_t(u16, width, vbox_crtc->x_hint +
+					  vbox_connector->mode_hint.width);
+		height = max_t(u16, height, vbox_crtc->y_hint +
+					    vbox_connector->mode_hint.height);
+	}
+
+	vbox->single_framebuffer = false;
+	vbox->input_mapping_width = width;
+	vbox->input_mapping_height = height;
+
+	return old_single_framebuffer != vbox->single_framebuffer;
+}
+
+static void vbox_crtc_set_base_and_mode(struct drm_crtc *crtc,
+					struct drm_framebuffer *fb,
+					int x, int y)
+{
+	struct drm_gem_vram_object *gbo = drm_gem_vram_of_gem(fb->obj[0]);
+	struct vbox_private *vbox = to_vbox_dev(crtc->dev);
+	struct vbox_crtc *vbox_crtc = to_vbox_crtc(crtc);
+	bool needs_modeset = drm_atomic_crtc_needs_modeset(crtc->state);
+
+	mutex_lock(&vbox->hw_mutex);
+
+	if (crtc->state->enable) {
+		vbox_crtc->width = crtc->state->mode.hdisplay;
+		vbox_crtc->height = crtc->state->mode.vdisplay;
+	}
+
+	vbox_crtc->x = x;
+	vbox_crtc->y = y;
+	vbox_crtc->fb_offset = drm_gem_vram_offset(gbo);
+
+	/* vbox_do_modeset() checks vbox->single_framebuffer so update it now */
+	if (needs_modeset && vbox_set_up_input_mapping(vbox)) {
+		struct drm_crtc *crtci;
+
+		list_for_each_entry(crtci, &vbox->ddev.mode_config.crtc_list,
+				    head) {
+			if (crtci == crtc)
+				continue;
+			vbox_do_modeset(crtci);
+		}
+	}
+
+	vbox_set_view(crtc);
+	vbox_do_modeset(crtc);
+
+	if (needs_modeset)
+		hgsmi_update_input_mapping(vbox->guest_pool, 0, 0,
+					   vbox->input_mapping_width,
+					   vbox->input_mapping_height);
+
+	mutex_unlock(&vbox->hw_mutex);
+}
+
+static void vbox_crtc_atomic_enable(struct drm_crtc *crtc,
+				    struct drm_atomic_commit *state)
+{
+}
+
+static void vbox_crtc_atomic_disable(struct drm_crtc *crtc,
+				     struct drm_atomic_commit *state)
+{
+}
+
+static void vbox_crtc_atomic_flush(struct drm_crtc *crtc,
+				   struct drm_atomic_commit *state)
+{
+}
+
+static const struct drm_crtc_helper_funcs vbox_crtc_helper_funcs = {
+	.atomic_enable = vbox_crtc_atomic_enable,
+	.atomic_disable = vbox_crtc_atomic_disable,
+	.atomic_flush = vbox_crtc_atomic_flush,
+};
+
+static void vbox_crtc_destroy(struct drm_crtc *crtc)
+{
+	drm_crtc_cleanup(crtc);
+	kfree(crtc);
+}
+
+static const struct drm_crtc_funcs vbox_crtc_funcs = {
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	/* .gamma_set = vbox_crtc_gamma_set, */
+	.destroy = vbox_crtc_destroy,
+	.reset = drm_atomic_helper_crtc_reset,
+	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+};
+
+static int vbox_primary_atomic_check(struct drm_plane *plane,
+				     struct drm_atomic_commit *state)
+{
+	struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
+									   plane);
+	struct drm_crtc_state *crtc_state = NULL;
+
+	if (new_state->crtc) {
+		crtc_state = drm_atomic_get_new_crtc_state(state,
+							   new_state->crtc);
+		if (WARN_ON(!crtc_state))
+			return -EINVAL;
+	}
+
+	return drm_atomic_helper_check_plane_state(new_state, crtc_state,
+						   DRM_PLANE_NO_SCALING,
+						   DRM_PLANE_NO_SCALING,
+						   false, true);
+}
+
+static void vbox_primary_atomic_update(struct drm_plane *plane,
+				       struct drm_atomic_commit *state)
+{
+	struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
+									   plane);
+	struct drm_crtc *crtc = new_state->crtc;
+	struct drm_framebuffer *fb = new_state->fb;
+	struct vbox_private *vbox = to_vbox_dev(fb->dev);
+	struct drm_mode_rect *clips;
+	uint32_t num_clips, i;
+
+	vbox_crtc_set_base_and_mode(crtc, fb,
+				    new_state->src_x >> 16,
+				    new_state->src_y >> 16);
+
+	/* Send information about dirty rectangles to VBVA. */
+
+	clips = drm_plane_get_damage_clips(new_state);
+	num_clips = drm_plane_get_damage_clips_count(new_state);
+
+	if (!num_clips)
+		return;
+
+	mutex_lock(&vbox->hw_mutex);
+
+	for (i = 0; i < num_clips; ++i, ++clips) {
+		struct vbva_cmd_hdr cmd_hdr;
+		unsigned int crtc_id = to_vbox_crtc(crtc)->crtc_id;
+
+		cmd_hdr.x = (s16)clips->x1;
+		cmd_hdr.y = (s16)clips->y1;
+		cmd_hdr.w = (u16)clips->x2 - clips->x1;
+		cmd_hdr.h = (u16)clips->y2 - clips->y1;
+
+		if (!vbva_buffer_begin_update(&vbox->vbva_info[crtc_id],
+					      vbox->guest_pool))
+			continue;
+
+		vbva_write(&vbox->vbva_info[crtc_id], vbox->guest_pool,
+			   &cmd_hdr, sizeof(cmd_hdr));
+		vbva_buffer_end_update(&vbox->vbva_info[crtc_id]);
+	}
+
+	mutex_unlock(&vbox->hw_mutex);
+}
+
+static void vbox_primary_atomic_disable(struct drm_plane *plane,
+					struct drm_atomic_commit *state)
+{
+	struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state,
+									   plane);
+	struct drm_crtc *crtc = old_state->crtc;
+
+	/* vbox_do_modeset checks plane->state->fb and will disable if NULL */
+	vbox_crtc_set_base_and_mode(crtc, old_state->fb,
+				    old_state->src_x >> 16,
+				    old_state->src_y >> 16);
+}
+
+static int vbox_cursor_atomic_check(struct drm_plane *plane,
+				    struct drm_atomic_commit *state)
+{
+	struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
+									   plane);
+	struct drm_crtc_state *crtc_state = NULL;
+	u32 width = new_state->crtc_w;
+	u32 height = new_state->crtc_h;
+	int ret;
+
+	if (new_state->crtc) {
+		crtc_state = drm_atomic_get_new_crtc_state(state,
+							   new_state->crtc);
+		if (WARN_ON(!crtc_state))
+			return -EINVAL;
+	}
+
+	ret = drm_atomic_helper_check_plane_state(new_state, crtc_state,
+						  DRM_PLANE_NO_SCALING,
+						  DRM_PLANE_NO_SCALING,
+						  true, true);
+	if (ret)
+		return ret;
+
+	if (!new_state->fb)
+		return 0;
+
+	if (width > VBOX_MAX_CURSOR_WIDTH || height > VBOX_MAX_CURSOR_HEIGHT ||
+	    width == 0 || height == 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * Copy the ARGB image and generate the mask, which is needed in case the host
+ * does not support ARGB cursors.  The mask is a 1BPP bitmap with the bit set
+ * if the corresponding alpha value in the ARGB image is greater than 0xF0.
+ */
+static void copy_cursor_image(u8 *src, u8 *dst, u32 width, u32 height,
+			      size_t mask_size)
+{
+	size_t line_size = (width + 7) / 8;
+	u32 i, j;
+
+	memcpy(dst + mask_size, src, width * height * 4);
+	for (i = 0; i < height; ++i)
+		for (j = 0; j < width; ++j)
+			if (((u32 *)src)[i * width + j] > 0xf0000000)
+				dst[i * line_size + j / 8] |= (0x80 >> (j % 8));
+}
+
+static void vbox_cursor_atomic_update(struct drm_plane *plane,
+				      struct drm_atomic_commit *state)
+{
+	struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state,
+									   plane);
+	struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
+									   plane);
+	struct vbox_private *vbox =
+		container_of(plane->dev, struct vbox_private, ddev);
+	struct vbox_crtc *vbox_crtc = to_vbox_crtc(new_state->crtc);
+	struct drm_framebuffer *fb = new_state->fb;
+	u32 width = new_state->crtc_w;
+	u32 height = new_state->crtc_h;
+	struct drm_shadow_plane_state *shadow_plane_state =
+		to_drm_shadow_plane_state(new_state);
+	struct iosys_map map = shadow_plane_state->data[0];
+	u8 *src = map.vaddr; /* TODO: Use mapping abstraction properly */
+	size_t data_size, mask_size;
+	u32 flags;
+
+	/*
+	 * VirtualBox uses the host windowing system to draw the cursor so
+	 * moves are a no-op, we only need to upload new cursor sprites.
+	 */
+	if (fb == old_state->fb)
+		return;
+
+	mutex_lock(&vbox->hw_mutex);
+
+	vbox_crtc->cursor_enabled = true;
+
+	/*
+	 * The mask must be calculated based on the alpha
+	 * channel, one bit per ARGB word, and must be 32-bit
+	 * padded.
+	 */
+	mask_size = ((width + 7) / 8 * height + 3) & ~3;
+	data_size = width * height * 4 + mask_size;
+
+	copy_cursor_image(src, vbox->cursor_data, width, height, mask_size);
+
+	flags = VBOX_MOUSE_POINTER_VISIBLE | VBOX_MOUSE_POINTER_SHAPE |
+		VBOX_MOUSE_POINTER_ALPHA;
+	hgsmi_update_pointer_shape(vbox->guest_pool, flags,
+				   min_t(u32, max(new_state->hotspot_x, 0), width),
+				   min_t(u32, max(new_state->hotspot_y, 0), height),
+				   width, height, vbox->cursor_data, data_size);
+
+	mutex_unlock(&vbox->hw_mutex);
+}
+
+static void vbox_cursor_atomic_disable(struct drm_plane *plane,
+				       struct drm_atomic_commit *state)
+{
+	struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state,
+									   plane);
+	struct vbox_private *vbox =
+		container_of(plane->dev, struct vbox_private, ddev);
+	struct vbox_crtc *vbox_crtc = to_vbox_crtc(old_state->crtc);
+	bool cursor_enabled = false;
+	struct drm_crtc *crtci;
+
+	mutex_lock(&vbox->hw_mutex);
+
+	vbox_crtc->cursor_enabled = false;
+
+	list_for_each_entry(crtci, &vbox->ddev.mode_config.crtc_list, head) {
+		if (to_vbox_crtc(crtci)->cursor_enabled)
+			cursor_enabled = true;
+	}
+
+	if (!cursor_enabled)
+		hgsmi_update_pointer_shape(vbox->guest_pool, 0, 0, 0,
+					   0, 0, NULL, 0);
+
+	mutex_unlock(&vbox->hw_mutex);
+}
+
+static const u32 vbox_cursor_plane_formats[] = {
+	DRM_FORMAT_ARGB8888,
+};
+
+static const struct drm_plane_helper_funcs vbox_cursor_helper_funcs = {
+	.atomic_check	= vbox_cursor_atomic_check,
+	.atomic_update	= vbox_cursor_atomic_update,
+	.atomic_disable	= vbox_cursor_atomic_disable,
+	DRM_GEM_SHADOW_PLANE_HELPER_FUNCS,
+};
+
+static const struct drm_plane_funcs vbox_cursor_plane_funcs = {
+	.update_plane	= drm_atomic_helper_update_plane,
+	.disable_plane	= drm_atomic_helper_disable_plane,
+	.destroy	= drm_plane_helper_destroy,
+	DRM_GEM_SHADOW_PLANE_FUNCS,
+};
+
+static const u32 vbox_primary_plane_formats[] = {
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ARGB8888,
+};
+
+static const struct drm_plane_helper_funcs vbox_primary_helper_funcs = {
+	.atomic_check = vbox_primary_atomic_check,
+	.atomic_update = vbox_primary_atomic_update,
+	.atomic_disable = vbox_primary_atomic_disable,
+	DRM_GEM_VRAM_PLANE_HELPER_FUNCS,
+};
+
+static const struct drm_plane_funcs vbox_primary_plane_funcs = {
+	.update_plane	= drm_atomic_helper_update_plane,
+	.disable_plane	= drm_atomic_helper_disable_plane,
+	.destroy	= drm_plane_helper_destroy,
+	.reset		= drm_atomic_helper_plane_reset,
+	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
+};
+
+static struct drm_plane *vbox_create_plane(struct vbox_private *vbox,
+					   unsigned int possible_crtcs,
+					   enum drm_plane_type type)
+{
+	const struct drm_plane_helper_funcs *helper_funcs = NULL;
+	const struct drm_plane_funcs *funcs;
+	struct drm_plane *plane;
+	const u32 *formats;
+	int num_formats;
+	int err;
+
+	if (type == DRM_PLANE_TYPE_PRIMARY) {
+		funcs = &vbox_primary_plane_funcs;
+		formats = vbox_primary_plane_formats;
+		helper_funcs = &vbox_primary_helper_funcs;
+		num_formats = ARRAY_SIZE(vbox_primary_plane_formats);
+	} else if (type == DRM_PLANE_TYPE_CURSOR) {
+		funcs = &vbox_cursor_plane_funcs;
+		formats = vbox_cursor_plane_formats;
+		helper_funcs = &vbox_cursor_helper_funcs;
+		num_formats = ARRAY_SIZE(vbox_cursor_plane_formats);
+	} else {
+		return ERR_PTR(-EINVAL);
+	}
+
+	plane = kzalloc_obj(*plane);
+	if (!plane)
+		return ERR_PTR(-ENOMEM);
+
+	err = drm_universal_plane_init(&vbox->ddev, plane, possible_crtcs,
+				       funcs, formats, num_formats,
+				       NULL, type, NULL);
+	if (err)
+		goto free_plane;
+
+	drm_plane_helper_add(plane, helper_funcs);
+
+	return plane;
+
+free_plane:
+	kfree(plane);
+	return ERR_PTR(-EINVAL);
+}
+
+static struct vbox_crtc *vbox_crtc_init(struct drm_device *dev, unsigned int i)
+{
+	struct vbox_private *vbox =
+		container_of(dev, struct vbox_private, ddev);
+	struct drm_plane *cursor = NULL;
+	struct vbox_crtc *vbox_crtc;
+	struct drm_plane *primary;
+	u32 caps = 0;
+	int ret;
+
+	ret = hgsmi_query_conf(vbox->guest_pool,
+			       VBOX_VBVA_CONF32_CURSOR_CAPABILITIES, &caps);
+	if (ret)
+		return ERR_PTR(ret);
+
+	vbox_crtc = kzalloc_obj(*vbox_crtc);
+	if (!vbox_crtc)
+		return ERR_PTR(-ENOMEM);
+
+	primary = vbox_create_plane(vbox, 1 << i, DRM_PLANE_TYPE_PRIMARY);
+	if (IS_ERR(primary)) {
+		ret = PTR_ERR(primary);
+		goto free_mem;
+	}
+
+	if ((caps & VBOX_VBVA_CURSOR_CAPABILITY_HARDWARE)) {
+		cursor = vbox_create_plane(vbox, 1 << i, DRM_PLANE_TYPE_CURSOR);
+		if (IS_ERR(cursor)) {
+			ret = PTR_ERR(cursor);
+			goto clean_primary;
+		}
+	} else {
+		DRM_WARN("VirtualBox host is too old, no cursor support\n");
+	}
+
+	vbox_crtc->crtc_id = i;
+
+	ret = drm_crtc_init_with_planes(dev, &vbox_crtc->base, primary, cursor,
+					&vbox_crtc_funcs, NULL);
+	if (ret)
+		goto clean_cursor;
+
+	drm_mode_crtc_set_gamma_size(&vbox_crtc->base, 256);
+	drm_crtc_helper_add(&vbox_crtc->base, &vbox_crtc_helper_funcs);
+
+	return vbox_crtc;
+
+clean_cursor:
+	if (cursor) {
+		drm_plane_cleanup(cursor);
+		kfree(cursor);
+	}
+clean_primary:
+	drm_plane_cleanup(primary);
+	kfree(primary);
+free_mem:
+	kfree(vbox_crtc);
+	return ERR_PTR(ret);
+}
+
+static void vbox_encoder_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+	kfree(encoder);
+}
+
+static const struct drm_encoder_funcs vbox_enc_funcs = {
+	.destroy = vbox_encoder_destroy,
+};
+
+static struct drm_encoder *vbox_encoder_init(struct drm_device *dev,
+					     unsigned int i)
+{
+	struct vbox_encoder *vbox_encoder;
+
+	vbox_encoder = kzalloc_obj(*vbox_encoder);
+	if (!vbox_encoder)
+		return NULL;
+
+	drm_encoder_init(dev, &vbox_encoder->base, &vbox_enc_funcs,
+			 DRM_MODE_ENCODER_DAC, NULL);
+
+	vbox_encoder->base.possible_crtcs = 1 << i;
+	return &vbox_encoder->base;
+}
+
+/*
+ * Generate EDID data with a mode-unique serial number for the virtual
+ * monitor to try to persuade Unity that different modes correspond to
+ * different monitors and it should not try to force the same resolution on
+ * them.
+ */
+static void vbox_set_edid(struct drm_connector *connector, int width,
+			  int height)
+{
+	enum { EDID_SIZE = 128 };
+	unsigned char edid[EDID_SIZE] = {
+		0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,	/* header */
+		0x58, 0x58,	/* manufacturer (VBX) */
+		0x00, 0x00,	/* product code */
+		0x00, 0x00, 0x00, 0x00,	/* serial number goes here */
+		0x01,		/* week of manufacture */
+		0x00,		/* year of manufacture */
+		0x01, 0x03,	/* EDID version */
+		0x80,		/* capabilities - digital */
+		0x00,		/* horiz. res in cm, zero for projectors */
+		0x00,		/* vert. res in cm */
+		0x78,		/* display gamma (120 == 2.2). */
+		0xEE,		/* features (standby, suspend, off, RGB, std */
+				/* colour space, preferred timing mode) */
+		0xEE, 0x91, 0xA3, 0x54, 0x4C, 0x99, 0x26, 0x0F, 0x50, 0x54,
+		/* chromaticity for standard colour space. */
+		0x00, 0x00, 0x00,	/* no default timings */
+		0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+		    0x01, 0x01,
+		0x01, 0x01, 0x01, 0x01,	/* no standard timings */
+		0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x02, 0x02,
+		    0x02, 0x02,
+		/* descriptor block 1 goes below */
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		/* descriptor block 2, monitor ranges */
+		0x00, 0x00, 0x00, 0xFD, 0x00,
+		0x00, 0xC8, 0x00, 0xC8, 0x64, 0x00, 0x0A, 0x20, 0x20, 0x20,
+		    0x20, 0x20,
+		/* 0-200Hz vertical, 0-200KHz horizontal, 1000MHz pixel clock */
+		0x20,
+		/* descriptor block 3, monitor name */
+		0x00, 0x00, 0x00, 0xFC, 0x00,
+		'V', 'B', 'O', 'X', ' ', 'm', 'o', 'n', 'i', 't', 'o', 'r',
+		'\n',
+		/* descriptor block 4: dummy data */
+		0x00, 0x00, 0x00, 0x10, 0x00,
+		0x0A, 0x20, 0x20, 0x20, 0x20, 0x20,
+		0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+		0x20,
+		0x00,		/* number of extensions */
+		0x00		/* checksum goes here */
+	};
+	int clock = (width + 6) * (height + 6) * 60 / 10000;
+	unsigned int i, sum = 0;
+
+	edid[12] = width & 0xff;
+	edid[13] = width >> 8;
+	edid[14] = height & 0xff;
+	edid[15] = height >> 8;
+	edid[54] = clock & 0xff;
+	edid[55] = clock >> 8;
+	edid[56] = width & 0xff;
+	edid[58] = (width >> 4) & 0xf0;
+	edid[59] = height & 0xff;
+	edid[61] = (height >> 4) & 0xf0;
+	for (i = 0; i < EDID_SIZE - 1; ++i)
+		sum += edid[i];
+	edid[EDID_SIZE - 1] = (0x100 - (sum & 0xFF)) & 0xFF;
+	drm_connector_update_edid_property(connector, (struct edid *)edid);
+}
+
+static int vbox_get_modes(struct drm_connector *connector)
+{
+	struct vbox_connector *vbox_connector = NULL;
+	struct drm_display_mode *mode = NULL;
+	struct vbox_private *vbox = NULL;
+	unsigned int num_modes = 0;
+	int preferred_width, preferred_height;
+
+	vbox_connector = to_vbox_connector(connector);
+	vbox = to_vbox_dev(connector->dev);
+
+	hgsmi_report_flags_location(vbox->guest_pool, GUEST_HEAP_OFFSET(vbox) +
+				    HOST_FLAGS_OFFSET);
+	if (vbox_connector->vbox_crtc->crtc_id == 0)
+		vbox_report_caps(vbox);
+
+	num_modes = drm_add_modes_noedid(connector, 2560, 1600);
+	preferred_width = vbox_connector->mode_hint.width ?
+			  vbox_connector->mode_hint.width : 1024;
+	preferred_height = vbox_connector->mode_hint.height ?
+			   vbox_connector->mode_hint.height : 768;
+	mode = drm_cvt_mode(connector->dev, preferred_width, preferred_height,
+			    60, false, false, false);
+	if (mode) {
+		mode->type |= DRM_MODE_TYPE_PREFERRED;
+		drm_mode_probed_add(connector, mode);
+		++num_modes;
+	}
+	vbox_set_edid(connector, preferred_width, preferred_height);
+
+	if (vbox_connector->vbox_crtc->x_hint != -1)
+		drm_object_property_set_value(&connector->base,
+			vbox->ddev.mode_config.suggested_x_property,
+			vbox_connector->vbox_crtc->x_hint);
+	else
+		drm_object_property_set_value(&connector->base,
+			vbox->ddev.mode_config.suggested_x_property, 0);
+
+	if (vbox_connector->vbox_crtc->y_hint != -1)
+		drm_object_property_set_value(&connector->base,
+			vbox->ddev.mode_config.suggested_y_property,
+			vbox_connector->vbox_crtc->y_hint);
+	else
+		drm_object_property_set_value(&connector->base,
+			vbox->ddev.mode_config.suggested_y_property, 0);
+
+	return num_modes;
+}
+
+static void vbox_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_unregister(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static enum drm_connector_status
+vbox_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct vbox_connector *vbox_connector;
+
+	vbox_connector = to_vbox_connector(connector);
+
+	return vbox_connector->mode_hint.disconnected ?
+	    connector_status_disconnected : connector_status_connected;
+}
+
+static int vbox_fill_modes(struct drm_connector *connector, u32 max_x,
+			   u32 max_y)
+{
+	struct vbox_connector *vbox_connector;
+	struct drm_device *dev;
+	struct drm_display_mode *mode, *iterator;
+
+	vbox_connector = to_vbox_connector(connector);
+	dev = vbox_connector->base.dev;
+	list_for_each_entry_safe(mode, iterator, &connector->modes, head) {
+		list_del(&mode->head);
+		drm_mode_destroy(dev, mode);
+	}
+
+	return drm_helper_probe_single_connector_modes(connector, max_x, max_y);
+}
+
+static const struct drm_connector_helper_funcs vbox_connector_helper_funcs = {
+	.get_modes = vbox_get_modes,
+};
+
+static const struct drm_connector_funcs vbox_connector_funcs = {
+	.detect = vbox_connector_detect,
+	.fill_modes = vbox_fill_modes,
+	.destroy = vbox_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int vbox_connector_init(struct drm_device *dev,
+			       struct vbox_crtc *vbox_crtc,
+			       struct drm_encoder *encoder)
+{
+	struct vbox_connector *vbox_connector;
+	struct drm_connector *connector;
+
+	vbox_connector = kzalloc_obj(*vbox_connector);
+	if (!vbox_connector)
+		return -ENOMEM;
+
+	connector = &vbox_connector->base;
+	vbox_connector->vbox_crtc = vbox_crtc;
+
+	drm_connector_init(dev, connector, &vbox_connector_funcs,
+			   DRM_MODE_CONNECTOR_VGA);
+	drm_connector_helper_add(connector, &vbox_connector_helper_funcs);
+
+	connector->interlace_allowed = 0;
+	connector->doublescan_allowed = 0;
+
+	drm_mode_create_suggested_offset_properties(dev);
+	drm_object_attach_property(&connector->base,
+				   dev->mode_config.suggested_x_property, 0);
+	drm_object_attach_property(&connector->base,
+				   dev->mode_config.suggested_y_property, 0);
+
+	drm_connector_attach_encoder(connector, encoder);
+
+	return 0;
+}
+
+static const struct drm_mode_config_funcs vbox_mode_funcs = {
+	.fb_create = drm_gem_fb_create_with_dirty,
+	.mode_valid = drm_vram_helper_mode_valid,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+int vbox_mode_init(struct vbox_private *vbox)
+{
+	struct drm_device *dev = &vbox->ddev;
+	struct drm_encoder *encoder;
+	struct vbox_crtc *vbox_crtc;
+	unsigned int i;
+	int ret;
+
+	drm_mode_config_init(dev);
+
+	dev->mode_config.funcs = (void *)&vbox_mode_funcs;
+	dev->mode_config.min_width = 0;
+	dev->mode_config.min_height = 0;
+	dev->mode_config.preferred_depth = 24;
+	dev->mode_config.max_width = VBE_DISPI_MAX_XRES;
+	dev->mode_config.max_height = VBE_DISPI_MAX_YRES;
+
+	for (i = 0; i < vbox->num_crtcs; ++i) {
+		vbox_crtc = vbox_crtc_init(dev, i);
+		if (IS_ERR(vbox_crtc)) {
+			ret = PTR_ERR(vbox_crtc);
+			goto err_drm_mode_cleanup;
+		}
+		encoder = vbox_encoder_init(dev, i);
+		if (!encoder) {
+			ret = -ENOMEM;
+			goto err_drm_mode_cleanup;
+		}
+		ret = vbox_connector_init(dev, vbox_crtc, encoder);
+		if (ret)
+			goto err_drm_mode_cleanup;
+	}
+
+	drm_mode_config_reset(dev);
+	return 0;
+
+err_drm_mode_cleanup:
+	drm_mode_config_cleanup(dev);
+	return ret;
+}
+
+void vbox_mode_fini(struct vbox_private *vbox)
+{
+	drm_mode_config_cleanup(&vbox->ddev);
+}

linux-7.2.3/drivers/gpu/drm/vboxvideo/vbox_ttm.c

@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright (C) 2013-2017 Oracle Corporation
+ * This file is based on ast_ttm.c
+ * Copyright 2012 Red Hat Inc.
+ * Authors: Dave Airlie <airlied@redhat.com>
+ *          Michael Thayer <michael.thayer@oracle.com>
+ */
+#include <linux/pci.h>
+#include <drm/drm_file.h>
+#include <drm/drm_print.h>
+#include "vbox_drv.h"
+
+int vbox_mm_init(struct vbox_private *vbox)
+{
+	int ret;
+	resource_size_t base, size;
+	struct drm_device *dev = &vbox->ddev;
+	struct pci_dev *pdev = to_pci_dev(dev->dev);
+
+	base = pci_resource_start(pdev, 0);
+	size = pci_resource_len(pdev, 0);
+
+	/* Don't fail on errors, but performance might be reduced. */
+	devm_arch_phys_wc_add(&pdev->dev, base, size);
+
+	ret = drmm_vram_helper_init(dev, base, vbox->available_vram_size);
+	if (ret) {
+		DRM_ERROR("Error initializing VRAM MM; %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}

linux-7.2.3/drivers/gpu/drm/vboxvideo/vboxvideo.h

@@ -0,0 +1,440 @@
+/* SPDX-License-Identifier: MIT */
+/* Copyright (C) 2006-2016 Oracle Corporation */
+
+#ifndef __VBOXVIDEO_H__
+#define __VBOXVIDEO_H__
+
+#define VBOX_VIDEO_MAX_SCREENS 64
+
+/*
+ * The last 4096 bytes of the guest VRAM contains the generic info for all
+ * DualView chunks: sizes and offsets of chunks. This is filled by miniport.
+ *
+ * Last 4096 bytes of each chunk contain chunk specific data: framebuffer info,
+ * etc. This is used exclusively by the corresponding instance of a display
+ * driver.
+ *
+ * The VRAM layout:
+ *   Last 4096 bytes - Adapter information area.
+ *   4096 bytes aligned miniport heap (value specified in the config rouded up).
+ *   Slack - what left after dividing the VRAM.
+ *   4096 bytes aligned framebuffers:
+ *     last 4096 bytes of each framebuffer is the display information area.
+ *
+ * The Virtual Graphics Adapter information in the guest VRAM is stored by the
+ * guest video driver using structures prepended by VBOXVIDEOINFOHDR.
+ *
+ * When the guest driver writes dword 0 to the VBE_DISPI_INDEX_VBOX_VIDEO
+ * the host starts to process the info. The first element at the start of
+ * the 4096 bytes region should be normally be a LINK that points to
+ * actual information chain. That way the guest driver can have some
+ * fixed layout of the information memory block and just rewrite
+ * the link to point to relevant memory chain.
+ *
+ * The processing stops at the END element.
+ *
+ * The host can access the memory only when the port IO is processed.
+ * All data that will be needed later must be copied from these 4096 bytes.
+ * But other VRAM can be used by host until the mode is disabled.
+ *
+ * The guest driver writes dword 0xffffffff to the VBE_DISPI_INDEX_VBOX_VIDEO
+ * to disable the mode.
+ *
+ * VBE_DISPI_INDEX_VBOX_VIDEO is used to read the configuration information
+ * from the host and issue commands to the host.
+ *
+ * The guest writes the VBE_DISPI_INDEX_VBOX_VIDEO index register, the
+ * following operations with the VBE data register can be performed:
+ *
+ * Operation            Result
+ * write 16 bit value   NOP
+ * read 16 bit value    count of monitors
+ * write 32 bit value   set the vbox cmd value and the cmd processed by the host
+ * read 32 bit value    result of the last vbox command is returned
+ */
+
+struct vbva_cmd_hdr {
+	s16 x;
+	s16 y;
+	u16 w;
+	u16 h;
+} __packed;
+
+/*
+ * The VBVA ring buffer is suitable for transferring large (< 2GB) amount of
+ * data. For example big bitmaps which do not fit to the buffer.
+ *
+ * Guest starts writing to the buffer by initializing a record entry in the
+ * records queue. VBVA_F_RECORD_PARTIAL indicates that the record is being
+ * written. As data is written to the ring buffer, the guest increases
+ * free_offset.
+ *
+ * The host reads the records on flushes and processes all completed records.
+ * When host encounters situation when only a partial record presents and
+ * len_and_flags & ~VBVA_F_RECORD_PARTIAL >= VBVA_RING_BUFFER_SIZE -
+ * VBVA_RING_BUFFER_THRESHOLD, the host fetched all record data and updates
+ * data_offset. After that on each flush the host continues fetching the data
+ * until the record is completed.
+ */
+
+#define VBVA_RING_BUFFER_SIZE        (4194304 - 1024)
+#define VBVA_RING_BUFFER_THRESHOLD   (4096)
+
+#define VBVA_MAX_RECORDS (64)
+
+#define VBVA_F_MODE_ENABLED         0x00000001u
+#define VBVA_F_MODE_VRDP            0x00000002u
+#define VBVA_F_MODE_VRDP_RESET      0x00000004u
+#define VBVA_F_MODE_VRDP_ORDER_MASK 0x00000008u
+
+#define VBVA_F_STATE_PROCESSING     0x00010000u
+
+#define VBVA_F_RECORD_PARTIAL       0x80000000u
+
+struct vbva_record {
+	u32 len_and_flags;
+} __packed;
+
+/*
+ * The minimum HGSMI heap size is PAGE_SIZE (4096 bytes) and is a restriction of
+ * the runtime heapsimple API. Use minimum 2 pages here, because the info area
+ * also may contain other data (for example hgsmi_host_flags structure).
+ */
+#define VBVA_ADAPTER_INFORMATION_SIZE 65536
+#define VBVA_MIN_BUFFER_SIZE          65536
+
+/* The value for port IO to let the adapter to interpret the adapter memory. */
+#define VBOX_VIDEO_DISABLE_ADAPTER_MEMORY        0xFFFFFFFF
+
+/* The value for port IO to let the adapter to interpret the adapter memory. */
+#define VBOX_VIDEO_INTERPRET_ADAPTER_MEMORY      0x00000000
+
+/*
+ * The value for port IO to let the adapter to interpret the display memory.
+ * The display number is encoded in low 16 bits.
+ */
+#define VBOX_VIDEO_INTERPRET_DISPLAY_MEMORY_BASE 0x00010000
+
+struct vbva_host_flags {
+	u32 host_events;
+	u32 supported_orders;
+} __packed;
+
+struct vbva_buffer {
+	struct vbva_host_flags host_flags;
+
+	/* The offset where the data start in the buffer. */
+	u32 data_offset;
+	/* The offset where next data must be placed in the buffer. */
+	u32 free_offset;
+
+	/* The queue of record descriptions. */
+	struct vbva_record records[VBVA_MAX_RECORDS];
+	u32 record_first_index;
+	u32 record_free_index;
+
+	/* Space to leave free when large partial records are transferred. */
+	u32 partial_write_tresh;
+
+	u32 data_len;
+	/* variable size for the rest of the vbva_buffer area in VRAM. */
+	u8 data[];
+} __packed;
+
+#define VBVA_MAX_RECORD_SIZE (128 * 1024 * 1024)
+
+/* guest->host commands */
+#define VBVA_QUERY_CONF32			 1
+#define VBVA_SET_CONF32				 2
+#define VBVA_INFO_VIEW				 3
+#define VBVA_INFO_HEAP				 4
+#define VBVA_FLUSH				 5
+#define VBVA_INFO_SCREEN			 6
+#define VBVA_ENABLE				 7
+#define VBVA_MOUSE_POINTER_SHAPE		 8
+/* informs host about HGSMI caps. see vbva_caps below */
+#define VBVA_INFO_CAPS				12
+/* configures scanline, see VBVASCANLINECFG below */
+#define VBVA_SCANLINE_CFG			13
+/* requests scanline info, see VBVASCANLINEINFO below */
+#define VBVA_SCANLINE_INFO			14
+/* inform host about VBVA Command submission */
+#define VBVA_CMDVBVA_SUBMIT			16
+/* inform host about VBVA Command submission */
+#define VBVA_CMDVBVA_FLUSH			17
+/* G->H DMA command */
+#define VBVA_CMDVBVA_CTL			18
+/* Query most recent mode hints sent */
+#define VBVA_QUERY_MODE_HINTS			19
+/*
+ * Report the guest virtual desktop position and size for mapping host and
+ * guest pointer positions.
+ */
+#define VBVA_REPORT_INPUT_MAPPING		20
+/* Report the guest cursor position and query the host position. */
+#define VBVA_CURSOR_POSITION			21
+
+/* host->guest commands */
+#define VBVAHG_EVENT				1
+#define VBVAHG_DISPLAY_CUSTOM			2
+
+/* vbva_conf32::index */
+#define VBOX_VBVA_CONF32_MONITOR_COUNT		0
+#define VBOX_VBVA_CONF32_HOST_HEAP_SIZE		1
+/*
+ * Returns VINF_SUCCESS if the host can report mode hints via VBVA.
+ * Set value to VERR_NOT_SUPPORTED before calling.
+ */
+#define VBOX_VBVA_CONF32_MODE_HINT_REPORTING	2
+/*
+ * Returns VINF_SUCCESS if the host can report guest cursor enabled status via
+ * VBVA.  Set value to VERR_NOT_SUPPORTED before calling.
+ */
+#define VBOX_VBVA_CONF32_GUEST_CURSOR_REPORTING	3
+/*
+ * Returns the currently available host cursor capabilities.  Available if
+ * VBOX_VBVA_CONF32_GUEST_CURSOR_REPORTING returns success.
+ */
+#define VBOX_VBVA_CONF32_CURSOR_CAPABILITIES	4
+/* Returns the supported flags in vbva_infoscreen.flags. */
+#define VBOX_VBVA_CONF32_SCREEN_FLAGS		5
+/* Returns the max size of VBVA record. */
+#define VBOX_VBVA_CONF32_MAX_RECORD_SIZE	6
+
+struct vbva_conf32 {
+	u32 index;
+	u32 value;
+} __packed;
+
+/* Reserved for historical reasons. */
+#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED0   BIT(0)
+/*
+ * Guest cursor capability: can the host show a hardware cursor at the host
+ * pointer location?
+ */
+#define VBOX_VBVA_CURSOR_CAPABILITY_HARDWARE    BIT(1)
+/* Reserved for historical reasons. */
+#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED2   BIT(2)
+/* Reserved for historical reasons.  Must always be unset. */
+#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED3   BIT(3)
+/* Reserved for historical reasons. */
+#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED4   BIT(4)
+/* Reserved for historical reasons. */
+#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED5   BIT(5)
+
+struct vbva_infoview {
+	/* Index of the screen, assigned by the guest. */
+	u32 view_index;
+
+	/* The screen offset in VRAM, the framebuffer starts here. */
+	u32 view_offset;
+
+	/* The size of the VRAM memory that can be used for the view. */
+	u32 view_size;
+
+	/* The recommended maximum size of the VRAM memory for the screen. */
+	u32 max_screen_size;
+} __packed;
+
+struct vbva_flush {
+	u32 reserved;
+} __packed;
+
+/* vbva_infoscreen.flags */
+#define VBVA_SCREEN_F_NONE			0x0000
+#define VBVA_SCREEN_F_ACTIVE			0x0001
+/*
+ * The virtual monitor has been disabled by the guest and should be removed
+ * by the host and ignored for purposes of pointer position calculation.
+ */
+#define VBVA_SCREEN_F_DISABLED			0x0002
+/*
+ * The virtual monitor has been blanked by the guest and should be blacked
+ * out by the host using width, height, etc values from the vbva_infoscreen
+ * request.
+ */
+#define VBVA_SCREEN_F_BLANK			0x0004
+/*
+ * The virtual monitor has been blanked by the guest and should be blacked
+ * out by the host using the previous mode values for width. height, etc.
+ */
+#define VBVA_SCREEN_F_BLANK2			0x0008
+
+struct vbva_infoscreen {
+	/* Which view contains the screen. */
+	u32 view_index;
+
+	/* Physical X origin relative to the primary screen. */
+	s32 origin_x;
+
+	/* Physical Y origin relative to the primary screen. */
+	s32 origin_y;
+
+	/* Offset of visible framebuffer relative to the framebuffer start. */
+	u32 start_offset;
+
+	/* The scan line size in bytes. */
+	u32 line_size;
+
+	/* Width of the screen. */
+	u32 width;
+
+	/* Height of the screen. */
+	u32 height;
+
+	/* Color depth. */
+	u16 bits_per_pixel;
+
+	/* VBVA_SCREEN_F_* */
+	u16 flags;
+} __packed;
+
+/* vbva_enable.flags */
+#define VBVA_F_NONE				0x00000000
+#define VBVA_F_ENABLE				0x00000001
+#define VBVA_F_DISABLE				0x00000002
+/* extended VBVA to be used with WDDM */
+#define VBVA_F_EXTENDED				0x00000004
+/* vbva offset is absolute VRAM offset */
+#define VBVA_F_ABSOFFSET			0x00000008
+
+struct vbva_enable {
+	u32 flags;
+	u32 offset;
+	s32 result;
+} __packed;
+
+struct vbva_enable_ex {
+	struct vbva_enable base;
+	u32 screen_id;
+} __packed;
+
+struct vbva_mouse_pointer_shape {
+	/* The host result. */
+	s32 result;
+
+	/* VBOX_MOUSE_POINTER_* bit flags. */
+	u32 flags;
+
+	/* X coordinate of the hot spot. */
+	u32 hot_X;
+
+	/* Y coordinate of the hot spot. */
+	u32 hot_y;
+
+	/* Width of the pointer in pixels. */
+	u32 width;
+
+	/* Height of the pointer in scanlines. */
+	u32 height;
+
+	/* Pointer data.
+	 *
+	 * The data consists of 1 bpp AND mask followed by 32 bpp XOR (color)
+	 * mask.
+	 *
+	 * For pointers without alpha channel the XOR mask pixels are 32 bit
+	 * values: (lsb)BGR0(msb). For pointers with alpha channel the XOR mask
+	 * consists of (lsb)BGRA(msb) 32 bit values.
+	 *
+	 * Guest driver must create the AND mask for pointers with alpha chan.,
+	 * so if host does not support alpha, the pointer could be displayed as
+	 * a normal color pointer. The AND mask can be constructed from alpha
+	 * values. For example alpha value >= 0xf0 means bit 0 in the AND mask.
+	 *
+	 * The AND mask is 1 bpp bitmap with byte aligned scanlines. Size of AND
+	 * mask, therefore, is and_len = (width + 7) / 8 * height. The padding
+	 * bits at the end of any scanline are undefined.
+	 *
+	 * The XOR mask follows the AND mask on the next 4 bytes aligned offset:
+	 * u8 *xor = and + (and_len + 3) & ~3
+	 * Bytes in the gap between the AND and the XOR mask are undefined.
+	 * XOR mask scanlines have no gap between them and size of XOR mask is:
+	 * xor_len = width * 4 * height.
+	 */
+	u8 data[];
+} __packed;
+
+/* pointer is visible */
+#define VBOX_MOUSE_POINTER_VISIBLE		0x0001
+/* pointer has alpha channel */
+#define VBOX_MOUSE_POINTER_ALPHA		0x0002
+/* pointerData contains new pointer shape */
+#define VBOX_MOUSE_POINTER_SHAPE		0x0004
+
+/*
+ * The guest driver can handle asynch guest cmd completion by reading the
+ * command offset from io port.
+ */
+#define VBVACAPS_COMPLETEGCMD_BY_IOREAD		0x00000001
+/* the guest driver can handle video adapter IRQs */
+#define VBVACAPS_IRQ				0x00000002
+/* The guest can read video mode hints sent via VBVA. */
+#define VBVACAPS_VIDEO_MODE_HINTS		0x00000004
+/* The guest can switch to a software cursor on demand. */
+#define VBVACAPS_DISABLE_CURSOR_INTEGRATION	0x00000008
+/* The guest does not depend on host handling the VBE registers. */
+#define VBVACAPS_USE_VBVA_ONLY			0x00000010
+
+struct vbva_caps {
+	s32 rc;
+	u32 caps;
+} __packed;
+
+/* Query the most recent mode hints received from the host. */
+struct vbva_query_mode_hints {
+	/* The maximum number of screens to return hints for. */
+	u16 hints_queried_count;
+	/* The size of the mode hint structures directly following this one. */
+	u16 hint_structure_guest_size;
+	/* Return code for the operation. Initialise to VERR_NOT_SUPPORTED. */
+	s32 rc;
+} __packed;
+
+/*
+ * Structure in which a mode hint is returned. The guest allocates an array
+ * of these immediately after the vbva_query_mode_hints structure.
+ * To accommodate future extensions, the vbva_query_mode_hints structure
+ * specifies the size of the vbva_modehint structures allocated by the guest,
+ * and the host only fills out structure elements which fit into that size. The
+ * host should fill any unused members (e.g. dx, dy) or structure space on the
+ * end with ~0. The whole structure can legally be set to ~0 to skip a screen.
+ */
+struct vbva_modehint {
+	u32 magic;
+	u32 cx;
+	u32 cy;
+	u32 bpp;		/* Which has never been used... */
+	u32 display;
+	u32 dx;			/* X offset into the virtual frame-buffer. */
+	u32 dy;			/* Y offset into the virtual frame-buffer. */
+	u32 enabled;		/* Not flags. Add new members for new flags. */
+} __packed;
+
+#define VBVAMODEHINT_MAGIC 0x0801add9u
+
+/*
+ * Report the rectangle relative to which absolute pointer events should be
+ * expressed. This information remains valid until the next VBVA resize event
+ * for any screen, at which time it is reset to the bounding rectangle of all
+ * virtual screens and must be re-set.
+ */
+struct vbva_report_input_mapping {
+	s32 x;	/* Upper left X co-ordinate relative to the first screen. */
+	s32 y;	/* Upper left Y co-ordinate relative to the first screen. */
+	u32 cx;	/* Rectangle width. */
+	u32 cy;	/* Rectangle height. */
+} __packed;
+
+/*
+ * Report the guest cursor position and query the host one. The host may wish
+ * to use the guest information to re-position its own cursor (though this is
+ * currently unlikely).
+ */
+struct vbva_cursor_position {
+	u32 report_position;	/* Are we reporting a position? */
+	u32 x;			/* Guest cursor X position */
+	u32 y;			/* Guest cursor Y position */
+} __packed;
+
+#endif

linux-7.2.3/drivers/gpu/drm/vboxvideo/vboxvideo_guest.h

@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: MIT */
+/* Copyright (C) 2006-2016 Oracle Corporation */
+
+#ifndef __VBOXVIDEO_GUEST_H__
+#define __VBOXVIDEO_GUEST_H__
+
+#include <linux/genalloc.h>
+#include "vboxvideo.h"
+
+/*
+ * Structure grouping the context needed for sending graphics acceleration
+ * information to the host via VBVA.  Each screen has its own VBVA buffer.
+ */
+struct vbva_buf_ctx {
+	/* Offset of the buffer in the VRAM section for the screen */
+	u32 buffer_offset;
+	/* Length of the buffer in bytes */
+	u32 buffer_length;
+	/* Set if we wrote to the buffer faster than the host could read it */
+	bool buffer_overflow;
+	/* VBVA record that we are currently preparing for the host, or NULL */
+	struct vbva_record *record;
+	/*
+	 * Pointer to the VBVA buffer mapped into the current address space.
+	 * Will be NULL if VBVA is not enabled.
+	 */
+	struct vbva_buffer *vbva;
+};
+
+int hgsmi_report_flags_location(struct gen_pool *ctx, u32 location);
+int hgsmi_send_caps_info(struct gen_pool *ctx, u32 caps);
+int hgsmi_test_query_conf(struct gen_pool *ctx);
+int hgsmi_query_conf(struct gen_pool *ctx, u32 index, u32 *value_ret);
+int hgsmi_update_pointer_shape(struct gen_pool *ctx, u32 flags,
+			       u32 hot_x, u32 hot_y, u32 width, u32 height,
+			       u8 *pixels, u32 len);
+
+bool vbva_enable(struct vbva_buf_ctx *vbva_ctx, struct gen_pool *ctx,
+		 struct vbva_buffer *vbva, s32 screen);
+void vbva_disable(struct vbva_buf_ctx *vbva_ctx, struct gen_pool *ctx,
+		  s32 screen);
+bool vbva_buffer_begin_update(struct vbva_buf_ctx *vbva_ctx,
+			      struct gen_pool *ctx);
+void vbva_buffer_end_update(struct vbva_buf_ctx *vbva_ctx);
+bool vbva_write(struct vbva_buf_ctx *vbva_ctx, struct gen_pool *ctx,
+		const void *p, u32 len);
+void vbva_setup_buffer_context(struct vbva_buf_ctx *vbva_ctx,
+			       u32 buffer_offset, u32 buffer_length);
+
+void hgsmi_process_display_info(struct gen_pool *ctx, u32 display,
+				s32 origin_x, s32 origin_y, u32 start_offset,
+				u32 pitch, u32 width, u32 height,
+				u16 bpp, u16 flags);
+int hgsmi_update_input_mapping(struct gen_pool *ctx, s32 origin_x, s32 origin_y,
+			       u32 width, u32 height);
+int hgsmi_get_mode_hints(struct gen_pool *ctx, unsigned int screens,
+			 struct vbva_modehint *hints);
+
+#endif

linux-7.2.3/drivers/gpu/drm/vboxvideo/vboxvideo_vbe.h

@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: MIT */
+/* Copyright (C) 2006-2016 Oracle Corporation */
+
+#ifndef __VBOXVIDEO_VBE_H__
+#define __VBOXVIDEO_VBE_H__
+
+/* GUEST <-> HOST Communication API */
+
+#define VBE_DISPI_BANK_ADDRESS          0xA0000
+#define VBE_DISPI_BANK_SIZE_KB          64
+
+#define VBE_DISPI_MAX_XRES              16384
+#define VBE_DISPI_MAX_YRES              16384
+#define VBE_DISPI_MAX_BPP               32
+
+#define VBE_DISPI_IOPORT_INDEX          0x01CE
+#define VBE_DISPI_IOPORT_DATA           0x01CF
+
+#define VBE_DISPI_IOPORT_DAC_WRITE_INDEX  0x03C8
+#define VBE_DISPI_IOPORT_DAC_DATA         0x03C9
+
+#define VBE_DISPI_INDEX_ID              0x0
+#define VBE_DISPI_INDEX_XRES            0x1
+#define VBE_DISPI_INDEX_YRES            0x2
+#define VBE_DISPI_INDEX_BPP             0x3
+#define VBE_DISPI_INDEX_ENABLE          0x4
+#define VBE_DISPI_INDEX_BANK            0x5
+#define VBE_DISPI_INDEX_VIRT_WIDTH      0x6
+#define VBE_DISPI_INDEX_VIRT_HEIGHT     0x7
+#define VBE_DISPI_INDEX_X_OFFSET        0x8
+#define VBE_DISPI_INDEX_Y_OFFSET        0x9
+#define VBE_DISPI_INDEX_VBOX_VIDEO      0xa
+#define VBE_DISPI_INDEX_FB_BASE_HI      0xb
+
+#define VBE_DISPI_ID0                   0xB0C0
+#define VBE_DISPI_ID1                   0xB0C1
+#define VBE_DISPI_ID2                   0xB0C2
+#define VBE_DISPI_ID3                   0xB0C3
+#define VBE_DISPI_ID4                   0xB0C4
+
+#define VBE_DISPI_ID_VBOX_VIDEO         0xBE00
+/* The VBOX interface id. Indicates support for VBVA shared memory interface. */
+#define VBE_DISPI_ID_HGSMI              0xBE01
+#define VBE_DISPI_ID_ANYX               0xBE02
+
+#define VBE_DISPI_DISABLED              0x00
+#define VBE_DISPI_ENABLED               0x01
+#define VBE_DISPI_GETCAPS               0x02
+#define VBE_DISPI_8BIT_DAC              0x20
+
+#define VGA_PORT_HGSMI_HOST             0x3b0
+#define VGA_PORT_HGSMI_GUEST            0x3d0
+
+#endif

linux-7.2.3/drivers/gpu/drm/vboxvideo/vbva_base.c

@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: MIT
+/* Copyright (C) 2006-2017 Oracle Corporation */
+
+#include <linux/vbox_err.h>
+#include "vbox_drv.h"
+#include "vboxvideo_guest.h"
+#include "hgsmi_channels.h"
+
+/*
+ * There is a hardware ring buffer in the graphics device video RAM, formerly
+ * in the VBox VMMDev PCI memory space.
+ * All graphics commands go there serialized by vbva_buffer_begin_update.
+ * and vbva_buffer_end_update.
+ *
+ * free_offset is writing position. data_offset is reading position.
+ * free_offset == data_offset means buffer is empty.
+ * There must be always gap between data_offset and free_offset when data
+ * are in the buffer.
+ * Guest only changes free_offset, host changes data_offset.
+ */
+
+static u32 vbva_buffer_available(const struct vbva_buffer *vbva)
+{
+	s32 diff = vbva->data_offset - vbva->free_offset;
+
+	return diff > 0 ? diff : vbva->data_len + diff;
+}
+
+static void vbva_buffer_place_data_at(struct vbva_buf_ctx *vbva_ctx,
+				      const void *p, u32 len, u32 offset)
+{
+	struct vbva_buffer *vbva = vbva_ctx->vbva;
+	u32 bytes_till_boundary = vbva->data_len - offset;
+	u8 *dst = &vbva->data[offset];
+	s32 diff = len - bytes_till_boundary;
+
+	if (diff <= 0) {
+		/* Chunk will not cross buffer boundary. */
+		memcpy(dst, p, len);
+	} else {
+		/* Chunk crosses buffer boundary. */
+		memcpy(dst, p, bytes_till_boundary);
+		memcpy(&vbva->data[0], (u8 *)p + bytes_till_boundary, diff);
+	}
+}
+
+static void vbva_buffer_flush(struct gen_pool *ctx)
+{
+	struct vbva_flush *p;
+
+	p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_VBVA, VBVA_FLUSH);
+	if (!p)
+		return;
+
+	p->reserved = 0;
+
+	hgsmi_buffer_submit(ctx, p);
+	hgsmi_buffer_free(ctx, p);
+}
+
+bool vbva_write(struct vbva_buf_ctx *vbva_ctx, struct gen_pool *ctx,
+		const void *p, u32 len)
+{
+	struct vbva_record *record;
+	struct vbva_buffer *vbva;
+	u32 available;
+
+	vbva = vbva_ctx->vbva;
+	record = vbva_ctx->record;
+
+	if (!vbva || vbva_ctx->buffer_overflow ||
+	    !record || !(record->len_and_flags & VBVA_F_RECORD_PARTIAL))
+		return false;
+
+	available = vbva_buffer_available(vbva);
+
+	while (len > 0) {
+		u32 chunk = len;
+
+		if (chunk >= available) {
+			vbva_buffer_flush(ctx);
+			available = vbva_buffer_available(vbva);
+		}
+
+		if (chunk >= available) {
+			if (WARN_ON(available <= vbva->partial_write_tresh)) {
+				vbva_ctx->buffer_overflow = true;
+				return false;
+			}
+			chunk = available - vbva->partial_write_tresh;
+		}
+
+		vbva_buffer_place_data_at(vbva_ctx, p, chunk,
+					  vbva->free_offset);
+
+		vbva->free_offset = (vbva->free_offset + chunk) %
+				    vbva->data_len;
+		record->len_and_flags += chunk;
+		available -= chunk;
+		len -= chunk;
+		p += chunk;
+	}
+
+	return true;
+}
+
+static bool vbva_inform_host(struct vbva_buf_ctx *vbva_ctx,
+			     struct gen_pool *ctx, s32 screen, bool enable)
+{
+	struct vbva_enable_ex *p;
+	bool ret;
+
+	p = hgsmi_buffer_alloc(ctx, sizeof(*p), HGSMI_CH_VBVA, VBVA_ENABLE);
+	if (!p)
+		return false;
+
+	p->base.flags = enable ? VBVA_F_ENABLE : VBVA_F_DISABLE;
+	p->base.offset = vbva_ctx->buffer_offset;
+	p->base.result = VERR_NOT_SUPPORTED;
+	if (screen >= 0) {
+		p->base.flags |= VBVA_F_EXTENDED | VBVA_F_ABSOFFSET;
+		p->screen_id = screen;
+	}
+
+	hgsmi_buffer_submit(ctx, p);
+
+	if (enable)
+		ret = p->base.result >= 0;
+	else
+		ret = true;
+
+	hgsmi_buffer_free(ctx, p);
+
+	return ret;
+}
+
+bool vbva_enable(struct vbva_buf_ctx *vbva_ctx, struct gen_pool *ctx,
+		 struct vbva_buffer *vbva, s32 screen)
+{
+	bool ret = false;
+
+	memset(vbva, 0, sizeof(*vbva));
+	vbva->partial_write_tresh = 256;
+	vbva->data_len = vbva_ctx->buffer_length - sizeof(struct vbva_buffer);
+	vbva_ctx->vbva = vbva;
+
+	ret = vbva_inform_host(vbva_ctx, ctx, screen, true);
+	if (!ret)
+		vbva_disable(vbva_ctx, ctx, screen);
+
+	return ret;
+}
+
+void vbva_disable(struct vbva_buf_ctx *vbva_ctx, struct gen_pool *ctx,
+		  s32 screen)
+{
+	vbva_ctx->buffer_overflow = false;
+	vbva_ctx->record = NULL;
+	vbva_ctx->vbva = NULL;
+
+	vbva_inform_host(vbva_ctx, ctx, screen, false);
+}
+
+bool vbva_buffer_begin_update(struct vbva_buf_ctx *vbva_ctx,
+			      struct gen_pool *ctx)
+{
+	struct vbva_record *record;
+	u32 next;
+
+	if (!vbva_ctx->vbva ||
+	    !(vbva_ctx->vbva->host_flags.host_events & VBVA_F_MODE_ENABLED))
+		return false;
+
+	WARN_ON(vbva_ctx->buffer_overflow || vbva_ctx->record);
+
+	next = (vbva_ctx->vbva->record_free_index + 1) % VBVA_MAX_RECORDS;
+
+	/* Flush if all slots in the records queue are used */
+	if (next == vbva_ctx->vbva->record_first_index)
+		vbva_buffer_flush(ctx);
+
+	/* If even after flush there is no place then fail the request */
+	if (next == vbva_ctx->vbva->record_first_index)
+		return false;
+
+	record = &vbva_ctx->vbva->records[vbva_ctx->vbva->record_free_index];
+	record->len_and_flags = VBVA_F_RECORD_PARTIAL;
+	vbva_ctx->vbva->record_free_index = next;
+	/* Remember which record we are using. */
+	vbva_ctx->record = record;
+
+	return true;
+}
+
+void vbva_buffer_end_update(struct vbva_buf_ctx *vbva_ctx)
+{
+	struct vbva_record *record = vbva_ctx->record;
+
+	WARN_ON(!vbva_ctx->vbva || !record ||
+		!(record->len_and_flags & VBVA_F_RECORD_PARTIAL));
+
+	/* Mark the record completed. */
+	record->len_and_flags &= ~VBVA_F_RECORD_PARTIAL;
+
+	vbva_ctx->buffer_overflow = false;
+	vbva_ctx->record = NULL;
+}
+
+void vbva_setup_buffer_context(struct vbva_buf_ctx *vbva_ctx,
+			       u32 buffer_offset, u32 buffer_length)
+{
+	vbva_ctx->buffer_offset = buffer_offset;
+	vbva_ctx->buffer_length = buffer_length;
+}