Resguardo inicial

linux-7.2.3/drivers/iio/common/cros_ec_sensors/Kconfig

@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Chrome OS Embedded Controller managed sensors library
+#
+config IIO_CROS_EC_SENSORS_CORE
+	tristate "ChromeOS EC Sensors Core"
+	depends on SYSFS && CROS_EC_SENSORHUB
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Base module for the ChromeOS EC Sensors module.
+	  Contains core functions used by other IIO CrosEC sensor
+	  drivers.
+	  Define common attributes and sysfs interrupt handler.
+
+config IIO_CROS_EC_SENSORS
+	tristate "ChromeOS EC Contiguous Sensors"
+	depends on IIO_CROS_EC_SENSORS_CORE
+	help
+	  Module to handle 3d contiguous sensors like
+	  Accelerometers, Gyroscope and Magnetometer that are
+	  presented by the ChromeOS EC Sensor hub.
+	  Creates an IIO device for each functions.
+
+config IIO_CROS_EC_SENSORS_LID_ANGLE
+	tristate "ChromeOS EC Sensor for lid angle"
+	depends on IIO_CROS_EC_SENSORS_CORE
+	help
+	  Module to report the angle between lid and base for some
+	  convertible devices.
+	  This module is loaded when the EC can calculate the angle between the base
+	  and the lid.
+
+config IIO_CROS_EC_ACTIVITY
+	tristate "ChromeOS EC Activity Sensors"
+	depends on IIO_CROS_EC_SENSORS_CORE
+	help
+	  Module to handle activity events presented by the ChromeOS EC sensor hub.
+	  Activities can be a proximity detector (on body/off body detection)
+	  or a significant motion detector.
+	  Creates an IIO device to manage all activities.

linux-7.2.3/drivers/iio/common/cros_ec_sensors/Makefile

@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for sensors seen through the ChromeOS EC sensor hub.
+#
+
+cros-ec-sensors-core-objs += cros_ec_sensors_core.o cros_ec_sensors_trace.o
+obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros-ec-sensors-core.o
+obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
+obj-$(CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE) += cros_ec_lid_angle.o
+obj-$(CONFIG_IIO_CROS_EC_ACTIVITY) += cros_ec_activity.o

linux-7.2.3/drivers/iio/common/cros_ec_sensors/cros_ec_activity.c

@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cros_ec_activity - Driver for activities/gesture recognition.
+ *
+ * Copyright 2025 Google, Inc
+ *
+ * This driver uses the cros-ec interface to communicate with the ChromeOS
+ * EC about activity data.
+ */
+
+#include <linux/bits.h>
+#include <linux/cleanup.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+
+#include <linux/iio/common/cros_ec_sensors_core.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define DRV_NAME "cros-ec-activity"
+
+/* state data for ec_sensors iio driver. */
+struct cros_ec_sensors_state {
+	/* Shared by all sensors */
+	struct cros_ec_sensors_core_state core;
+
+	struct iio_chan_spec *channels;
+
+	int body_detection_channel_index;
+	int sig_motion_channel_index;
+};
+
+static const struct iio_event_spec cros_ec_activity_single_shot[] = {
+	{
+		.type = IIO_EV_TYPE_CHANGE,
+		/* significant motion trigger when we get out of still. */
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_event_spec cros_ec_body_detect_events[] = {
+	{
+		.type = IIO_EV_TYPE_CHANGE,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static int cros_ec_activity_sensors_read_raw(struct iio_dev *indio_dev,
+					     struct iio_chan_spec const *chan,
+					     int *val, int *val2, long mask)
+{
+	struct cros_ec_sensors_state *st = iio_priv(indio_dev);
+	int ret;
+
+	if (chan->type != IIO_PROXIMITY || mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	guard(mutex)(&st->core.cmd_lock);
+	st->core.param.cmd = MOTIONSENSE_CMD_GET_ACTIVITY;
+	st->core.param.get_activity.activity =
+		MOTIONSENSE_ACTIVITY_BODY_DETECTION;
+	ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+	if (ret)
+		return ret;
+
+	/*
+	 * EC actually report if a body is near (1) or far (0).
+	 * Units for proximity sensor after scale is in meter,
+	 * so invert the result to return 0m when near and 1m when far.
+	 */
+	*val = !st->core.resp->get_activity.state;
+	return IIO_VAL_INT;
+}
+
+static int cros_ec_activity_read_event_config(struct iio_dev *indio_dev,
+					      const struct iio_chan_spec *chan,
+					      enum iio_event_type type,
+					      enum iio_event_direction dir)
+{
+	struct cros_ec_sensors_state *st = iio_priv(indio_dev);
+	int ret;
+
+	if (chan->type != IIO_ACTIVITY && chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	guard(mutex)(&st->core.cmd_lock);
+	st->core.param.cmd = MOTIONSENSE_CMD_LIST_ACTIVITIES;
+	ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+	if (ret)
+		return ret;
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		return !!(st->core.resp->list_activities.enabled &
+			 (1 << MOTIONSENSE_ACTIVITY_BODY_DETECTION));
+	case IIO_ACTIVITY:
+		if (chan->channel2 == IIO_MOD_STILL) {
+			return !!(st->core.resp->list_activities.enabled &
+				 (1 << MOTIONSENSE_ACTIVITY_SIG_MOTION));
+		}
+
+		dev_warn(&indio_dev->dev, "Unknown activity: %d\n",
+			 chan->channel2);
+		return -EINVAL;
+	default:
+		dev_warn(&indio_dev->dev, "Unknown channel type: %d\n",
+			 chan->type);
+		return -EINVAL;
+	}
+}
+
+static int cros_ec_activity_write_event_config(struct iio_dev *indio_dev,
+					       const struct iio_chan_spec *chan,
+					       enum iio_event_type type,
+					       enum iio_event_direction dir,
+					       bool state)
+{
+	struct cros_ec_sensors_state *st = iio_priv(indio_dev);
+
+	guard(mutex)(&st->core.cmd_lock);
+	st->core.param.cmd = MOTIONSENSE_CMD_SET_ACTIVITY;
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		st->core.param.set_activity.activity =
+			MOTIONSENSE_ACTIVITY_BODY_DETECTION;
+		break;
+	case IIO_ACTIVITY:
+		if (chan->channel2 == IIO_MOD_STILL) {
+			st->core.param.set_activity.activity =
+				MOTIONSENSE_ACTIVITY_SIG_MOTION;
+			break;
+		}
+		dev_warn(&indio_dev->dev, "Unknown activity: %d\n",
+			 chan->channel2);
+		return -EINVAL;
+	default:
+		dev_warn(&indio_dev->dev, "Unknown channel type: %d\n",
+			 chan->type);
+		return -EINVAL;
+	}
+	st->core.param.set_activity.enable = state;
+	return cros_ec_motion_send_host_cmd(&st->core, 0);
+}
+
+static int cros_ec_activity_push_data(struct iio_dev *indio_dev,
+				      s16 *data, s64 timestamp)
+{
+	struct ec_response_activity_data *activity_data =
+			(struct ec_response_activity_data *)data;
+	enum motionsensor_activity activity = activity_data->activity;
+	u8 state = activity_data->state;
+	const struct cros_ec_sensors_state *st = iio_priv(indio_dev);
+	const struct iio_chan_spec *chan;
+	enum iio_event_direction dir;
+	int index;
+
+	switch (activity) {
+	case MOTIONSENSE_ACTIVITY_BODY_DETECTION:
+		index = st->body_detection_channel_index;
+		dir = state ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
+		break;
+	case MOTIONSENSE_ACTIVITY_SIG_MOTION:
+		index = st->sig_motion_channel_index;
+		dir = IIO_EV_DIR_FALLING;
+		break;
+	default:
+		dev_warn(&indio_dev->dev, "Unknown activity: %d\n", activity);
+		return 0;
+	}
+	chan = &st->channels[index];
+	iio_push_event(indio_dev,
+		       IIO_UNMOD_EVENT_CODE(chan->type, index, chan->event_spec[0].type, dir),
+		       timestamp);
+	return 0;
+}
+
+static irqreturn_t cros_ec_activity_capture(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+
+	/*
+	 * This callback would be called when a software trigger is
+	 * used. But when this virtual sensor is present, it is guaranteed
+	 * the sensor hub is advanced enough to not need a software trigger.
+	 */
+	dev_warn(&indio_dev->dev, "%s: Not Expected\n", __func__);
+	return IRQ_NONE;
+}
+
+static const struct iio_info ec_sensors_info = {
+	.read_raw = &cros_ec_activity_sensors_read_raw,
+	.read_event_config = cros_ec_activity_read_event_config,
+	.write_event_config = cros_ec_activity_write_event_config,
+};
+
+static int cros_ec_sensors_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cros_ec_device *ec_device = dev_get_drvdata(dev->parent);
+	struct iio_dev *indio_dev;
+	struct cros_ec_sensors_state *st;
+	struct iio_chan_spec *channel;
+	unsigned long activities;
+	int i, index, ret, nb_activities;
+
+	if (!ec_device) {
+		dev_warn(dev, "No CROS EC device found.\n");
+		return -EINVAL;
+	}
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true,
+					cros_ec_activity_capture);
+	if (ret)
+		return ret;
+
+	indio_dev->info = &ec_sensors_info;
+	st = iio_priv(indio_dev);
+	st->core.type = st->core.resp->info.type;
+	st->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
+
+	st->core.param.cmd = MOTIONSENSE_CMD_LIST_ACTIVITIES;
+	ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+	if (ret)
+		return ret;
+
+	activities = st->core.resp->list_activities.enabled |
+		     st->core.resp->list_activities.disabled;
+	if (!activities)
+		return -ENODEV;
+
+	/* Allocate a channel per activity and one for timestamp */
+	nb_activities = hweight_long(activities) + 1;
+	st->channels = devm_kcalloc(dev, nb_activities,
+				    sizeof(*st->channels), GFP_KERNEL);
+	if (!st->channels)
+		return -ENOMEM;
+
+	channel = &st->channels[0];
+	index = 0;
+	for_each_set_bit(i, &activities, BITS_PER_LONG) {
+		/* List all available triggers */
+		if (i == MOTIONSENSE_ACTIVITY_BODY_DETECTION) {
+			channel->type = IIO_PROXIMITY;
+			channel->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
+			channel->event_spec = cros_ec_body_detect_events;
+			channel->num_event_specs =
+				ARRAY_SIZE(cros_ec_body_detect_events);
+			st->body_detection_channel_index = index;
+		} else {
+			channel->type = IIO_ACTIVITY;
+			channel->modified = 1;
+			channel->event_spec = cros_ec_activity_single_shot;
+			channel->num_event_specs =
+				ARRAY_SIZE(cros_ec_activity_single_shot);
+			if (i == MOTIONSENSE_ACTIVITY_SIG_MOTION) {
+				channel->channel2 = IIO_MOD_STILL;
+				st->sig_motion_channel_index = index;
+			} else {
+				dev_warn(dev, "Unknown activity: %d\n", i);
+				continue;
+			}
+		}
+		channel->ext_info = cros_ec_sensors_limited_info;
+		channel->scan_index = index++;
+		channel++;
+	}
+
+	*channel = IIO_CHAN_SOFT_TIMESTAMP(index);
+
+	indio_dev->channels = st->channels;
+	indio_dev->num_channels = index + 1;
+
+	return cros_ec_sensors_core_register(dev, indio_dev,
+					     cros_ec_activity_push_data);
+}
+
+static struct platform_driver cros_ec_sensors_platform_driver = {
+	.driver = {
+		.name	= DRV_NAME,
+	},
+	.probe		= cros_ec_sensors_probe,
+};
+module_platform_driver(cros_ec_sensors_platform_driver);
+
+MODULE_DESCRIPTION("ChromeOS EC activity sensors driver");
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_LICENSE("GPL v2");

linux-7.2.3/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c

@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * cros_ec_lid_angle - Driver for CrOS EC lid angle sensor.
+ *
+ * Copyright 2018 Google, Inc
+ *
+ * This driver uses the cros-ec interface to communicate with the Chrome OS
+ * EC about counter sensors. Counters are presented through
+ * iio sysfs.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/common/cros_ec_sensors_core.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define DRV_NAME "cros-ec-lid-angle"
+
+/*
+ * One channel for the lid angle, the other for timestamp.
+ */
+static const struct iio_chan_spec cros_ec_lid_angle_channels[] = {
+	{
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_type.realbits = CROS_EC_SENSOR_BITS,
+		.scan_type.storagebits = CROS_EC_SENSOR_BITS,
+		.scan_type.sign = 'u',
+		.type = IIO_ANGL
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1)
+};
+
+/* State data for ec_sensors iio driver. */
+struct cros_ec_lid_angle_state {
+	/* Shared by all sensors */
+	struct cros_ec_sensors_core_state core;
+};
+
+static int cros_ec_sensors_read_lid_angle(struct iio_dev *indio_dev,
+					  unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret;
+
+	st->param.cmd = MOTIONSENSE_CMD_LID_ANGLE;
+	ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->lid_angle));
+	if (ret) {
+		dev_warn(&indio_dev->dev, "Unable to read lid angle\n");
+		return ret;
+	}
+
+	*data = st->resp->lid_angle.value;
+	return 0;
+}
+
+static int cros_ec_lid_angle_read(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan,
+				    int *val, int *val2, long mask)
+{
+	struct cros_ec_lid_angle_state *st = iio_priv(indio_dev);
+	s16 data;
+	int ret;
+
+	mutex_lock(&st->core.cmd_lock);
+	ret = cros_ec_sensors_read_lid_angle(indio_dev, 1, &data);
+	if (ret == 0) {
+		*val = data;
+		ret = IIO_VAL_INT;
+	}
+	mutex_unlock(&st->core.cmd_lock);
+	return ret;
+}
+
+static const struct iio_info cros_ec_lid_angle_info = {
+	.read_raw = &cros_ec_lid_angle_read,
+};
+
+static int cros_ec_lid_angle_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct iio_dev *indio_dev;
+	struct cros_ec_lid_angle_state *state;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, false, NULL);
+	if (ret)
+		return ret;
+
+	indio_dev->info = &cros_ec_lid_angle_info;
+	state = iio_priv(indio_dev);
+	indio_dev->channels = cros_ec_lid_angle_channels;
+	indio_dev->num_channels = ARRAY_SIZE(cros_ec_lid_angle_channels);
+
+	state->core.read_ec_sensors_data = cros_ec_sensors_read_lid_angle;
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+			cros_ec_sensors_capture, NULL);
+	if (ret)
+		return ret;
+
+	return cros_ec_sensors_core_register(dev, indio_dev, NULL);
+}
+
+static const struct platform_device_id cros_ec_lid_angle_ids[] = {
+	{
+		.name = DRV_NAME,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids);
+
+static struct platform_driver cros_ec_lid_angle_platform_driver = {
+	.driver = {
+		.name	= DRV_NAME,
+	},
+	.probe		= cros_ec_lid_angle_probe,
+	.id_table	= cros_ec_lid_angle_ids,
+};
+module_platform_driver(cros_ec_lid_angle_platform_driver);
+
+MODULE_DESCRIPTION("ChromeOS EC driver for reporting convertible lid angle.");
+MODULE_LICENSE("GPL v2");

linux-7.2.3/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c

@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cros_ec_sensors - Driver for Chrome OS Embedded Controller sensors.
+ *
+ * Copyright (C) 2016 Google, Inc
+ *
+ * This driver uses the cros-ec interface to communicate with the Chrome OS
+ * EC about sensors data. Data access is presented through iio sysfs.
+ */
+
+#include <linux/device.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/common/cros_ec_sensors_core.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define CROS_EC_SENSORS_MAX_CHANNELS 4
+
+/* State data for ec_sensors iio driver. */
+struct cros_ec_sensors_state {
+	/* Shared by all sensors */
+	struct cros_ec_sensors_core_state core;
+
+	struct iio_chan_spec channels[CROS_EC_SENSORS_MAX_CHANNELS];
+};
+
+static int cros_ec_sensors_read(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	struct cros_ec_sensors_state *st = iio_priv(indio_dev);
+	s16 data = 0;
+	s64 val64;
+	int i;
+	int ret;
+	int idx = chan->scan_index;
+
+	mutex_lock(&st->core.cmd_lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = st->core.read_ec_sensors_data(indio_dev, 1 << idx, &data);
+		if (ret < 0)
+			break;
+		ret = IIO_VAL_INT;
+		*val = data;
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
+		st->core.param.sensor_offset.flags = 0;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret < 0)
+			break;
+
+		/* Save values */
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->core.calib[i].offset =
+				st->core.resp->sensor_offset.offset[i];
+		ret = IIO_VAL_INT;
+		*val = st->core.calib[idx].offset;
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_SCALE;
+		st->core.param.sensor_offset.flags = 0;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret == -EPROTO || ret == -EOPNOTSUPP) {
+			/* Reading calibscale is not supported on older EC. */
+			*val = 1;
+			*val2 = 0;
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		} else if (ret) {
+			break;
+		}
+
+		/* Save values */
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->core.calib[i].scale =
+				st->core.resp->sensor_scale.scale[i];
+
+		*val = st->core.calib[idx].scale >> 15;
+		*val2 = ((st->core.calib[idx].scale & 0x7FFF) * 1000000LL) /
+			MOTION_SENSE_DEFAULT_SCALE;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
+		st->core.param.sensor_range.data = EC_MOTION_SENSE_NO_VALUE;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret < 0)
+			break;
+
+		val64 = st->core.resp->sensor_range.ret;
+		switch (st->core.type) {
+		case MOTIONSENSE_TYPE_ACCEL:
+			/*
+			 * EC returns data in g, IIO expects m/s^2.
+			 * Do not use IIO_G_TO_M_S_2 to avoid precision loss.
+			 */
+			*val = div_s64(val64 * 980665, 10);
+			*val2 = 10000 << (CROS_EC_SENSOR_BITS - 1);
+			ret = IIO_VAL_FRACTIONAL;
+			break;
+		case MOTIONSENSE_TYPE_GYRO:
+			/*
+			 * EC returns data in dps, iio expects rad/s.
+			 * Do not use IIO_DEGREE_TO_RAD to avoid precision
+			 * loss. Round to the nearest integer.
+			 */
+			*val = 0;
+			*val2 = div_s64(val64 * 3141592653ULL,
+					180 << (CROS_EC_SENSOR_BITS - 1));
+			ret = IIO_VAL_INT_PLUS_NANO;
+			break;
+		case MOTIONSENSE_TYPE_MAG:
+			/*
+			 * EC returns data in 16LSB / uT,
+			 * iio expects Gauss
+			 */
+			*val = val64;
+			*val2 = 100 << (CROS_EC_SENSOR_BITS - 1);
+			ret = IIO_VAL_FRACTIONAL;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	default:
+		ret = cros_ec_sensors_core_read(&st->core, chan, val, val2,
+						mask);
+		break;
+	}
+	mutex_unlock(&st->core.cmd_lock);
+
+	return ret;
+}
+
+static int cros_ec_sensors_write(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask)
+{
+	struct cros_ec_sensors_state *st = iio_priv(indio_dev);
+	int i;
+	int ret;
+	int idx = chan->scan_index;
+
+	mutex_lock(&st->core.cmd_lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		st->core.calib[idx].offset = val;
+
+		/* Send to EC for each axis, even if not complete */
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
+		st->core.param.sensor_offset.flags =
+			MOTION_SENSE_SET_OFFSET;
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->core.param.sensor_offset.offset[i] =
+				st->core.calib[i].offset;
+		st->core.param.sensor_offset.temp =
+			EC_MOTION_SENSE_INVALID_CALIB_TEMP;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		st->core.calib[idx].scale = val;
+		/* Send to EC for each axis, even if not complete */
+
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_SCALE;
+		st->core.param.sensor_offset.flags =
+			MOTION_SENSE_SET_OFFSET;
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->core.param.sensor_scale.scale[i] =
+				st->core.calib[i].scale;
+		st->core.param.sensor_scale.temp =
+			EC_MOTION_SENSE_INVALID_CALIB_TEMP;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		if (st->core.type == MOTIONSENSE_TYPE_MAG) {
+			ret = -EINVAL;
+			break;
+		}
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
+		st->core.param.sensor_range.data = val;
+
+		/* Always roundup, so caller gets at least what it asks for. */
+		st->core.param.sensor_range.roundup = 1;
+
+		ret = cros_ec_motion_send_host_cmd(&st->core, 0);
+		if (ret == 0) {
+			st->core.range_updated = true;
+			st->core.curr_range = val;
+		}
+		break;
+	default:
+		ret = cros_ec_sensors_core_write(
+				&st->core, chan, val, val2, mask);
+		break;
+	}
+
+	mutex_unlock(&st->core.cmd_lock);
+
+	return ret;
+}
+
+static const struct iio_info ec_sensors_info = {
+	.read_raw = &cros_ec_sensors_read,
+	.write_raw = &cros_ec_sensors_write,
+	.read_avail = &cros_ec_sensors_core_read_avail,
+};
+
+static int cros_ec_sensors_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct iio_dev *indio_dev;
+	struct cros_ec_sensors_state *state;
+	struct iio_chan_spec *channel;
+	int ret, i;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true,
+					cros_ec_sensors_capture);
+	if (ret)
+		return ret;
+
+	indio_dev->info = &ec_sensors_info;
+	state = iio_priv(indio_dev);
+	for (channel = state->channels, i = CROS_EC_SENSOR_X;
+	     i < CROS_EC_SENSOR_MAX_AXIS; i++, channel++) {
+		/* Common part */
+		channel->info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_CALIBBIAS) |
+			BIT(IIO_CHAN_INFO_CALIBSCALE);
+		channel->info_mask_shared_by_all =
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_SAMP_FREQ);
+		channel->info_mask_shared_by_all_available =
+			BIT(IIO_CHAN_INFO_SAMP_FREQ);
+		channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
+		channel->scan_type.storagebits = CROS_EC_SENSOR_BITS;
+		channel->scan_index = i;
+		channel->ext_info = cros_ec_sensors_ext_info;
+		channel->modified = 1;
+		channel->channel2 = IIO_MOD_X + i;
+		channel->scan_type.sign = 's';
+
+		/* Sensor specific */
+		switch (state->core.type) {
+		case MOTIONSENSE_TYPE_ACCEL:
+			channel->type = IIO_ACCEL;
+			break;
+		case MOTIONSENSE_TYPE_GYRO:
+			channel->type = IIO_ANGL_VEL;
+			break;
+		case MOTIONSENSE_TYPE_MAG:
+			channel->type = IIO_MAGN;
+			break;
+		default:
+			dev_err(&pdev->dev, "Unknown motion sensor\n");
+			return -EINVAL;
+		}
+	}
+
+	*channel = IIO_CHAN_SOFT_TIMESTAMP(CROS_EC_SENSOR_MAX_AXIS);
+
+	indio_dev->channels = state->channels;
+	indio_dev->num_channels = CROS_EC_SENSORS_MAX_CHANNELS;
+
+	/* There is only enough room for accel and gyro in the io space */
+	if ((state->core.ec->cmd_readmem != NULL) &&
+	    (state->core.type != MOTIONSENSE_TYPE_MAG))
+		state->core.read_ec_sensors_data = cros_ec_sensors_read_lpc;
+	else
+		state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
+
+	return cros_ec_sensors_core_register(dev, indio_dev,
+			cros_ec_sensors_push_data);
+}
+
+static const struct platform_device_id cros_ec_sensors_ids[] = {
+	{
+		.name = "cros-ec-accel",
+	},
+	{
+		.name = "cros-ec-gyro",
+	},
+	{
+		.name = "cros-ec-mag",
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, cros_ec_sensors_ids);
+
+static struct platform_driver cros_ec_sensors_platform_driver = {
+	.driver = {
+		.name	= "cros-ec-sensors",
+		.pm	= &cros_ec_sensors_pm_ops,
+	},
+	.probe		= cros_ec_sensors_probe,
+	.id_table	= cros_ec_sensors_ids,
+};
+module_platform_driver(cros_ec_sensors_platform_driver);
+
+MODULE_DESCRIPTION("ChromeOS EC 3-axis sensors driver");
+MODULE_LICENSE("GPL v2");

linux-7.2.3/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c

@@ -0,0 +1,886 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * cros_ec_sensors_core - Common function for Chrome OS EC sensor driver.
+ *
+ * Copyright (C) 2016 Google, Inc
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/common/cros_ec_sensors_core.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_data/cros_ec_sensorhub.h>
+#include <linux/platform_device.h>
+
+#include "cros_ec_sensors_trace.h"
+
+/*
+ * Hard coded to the first device to support sensor fifo.  The EC has a 2048
+ * byte fifo and will trigger an interrupt when fifo is 2/3 full.
+ */
+#define CROS_EC_FIFO_SIZE (2048 * 2 / 3)
+
+static int cros_ec_get_host_cmd_version_mask(struct cros_ec_device *ec_dev,
+					     u16 cmd_offset, u16 cmd, u32 *mask)
+{
+	DEFINE_RAW_FLEX(struct cros_ec_command, buf, data,
+			MAX(sizeof(struct ec_response_get_cmd_versions),
+			    sizeof(struct ec_params_get_cmd_versions)));
+	int ret;
+
+	buf->command = EC_CMD_GET_CMD_VERSIONS + cmd_offset;
+	buf->insize = sizeof(struct ec_response_get_cmd_versions);
+	buf->outsize = sizeof(struct ec_params_get_cmd_versions);
+	((struct ec_params_get_cmd_versions *)buf->data)->cmd = cmd;
+
+	ret = cros_ec_cmd_xfer_status(ec_dev, buf);
+	if (ret >= 0)
+		*mask = ((struct ec_response_get_cmd_versions *)buf->data)->version_mask;
+	return ret;
+}
+
+static void get_default_min_max_freq(enum motionsensor_type type,
+				     u32 *min_freq,
+				     u32 *max_freq,
+				     u32 *max_fifo_events)
+{
+	/*
+	 * We don't know fifo size, set to size previously used by older
+	 * hardware.
+	 */
+	*max_fifo_events = CROS_EC_FIFO_SIZE;
+
+	switch (type) {
+	case MOTIONSENSE_TYPE_ACCEL:
+		*min_freq = 12500;
+		*max_freq = 100000;
+		break;
+	case MOTIONSENSE_TYPE_GYRO:
+		*min_freq = 25000;
+		*max_freq = 100000;
+		break;
+	case MOTIONSENSE_TYPE_MAG:
+		*min_freq = 5000;
+		*max_freq = 25000;
+		break;
+	case MOTIONSENSE_TYPE_PROX:
+	case MOTIONSENSE_TYPE_LIGHT:
+		*min_freq = 100;
+		*max_freq = 50000;
+		break;
+	case MOTIONSENSE_TYPE_BARO:
+		*min_freq = 250;
+		*max_freq = 20000;
+		break;
+	case MOTIONSENSE_TYPE_ACTIVITY:
+	default:
+		*min_freq = 0;
+		*max_freq = 0;
+		break;
+	}
+}
+
+static ssize_t cros_ec_sensor_set_report_latency(struct device *dev,
+						 struct device_attribute *attr,
+						 const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int integer, fract, ret;
+	int latency;
+
+	ret = iio_str_to_fixpoint(buf, 100000, &integer, &fract);
+	if (ret)
+		return ret;
+
+	/* EC rate is in ms. */
+	latency = integer * 1000 + fract / 1000;
+
+	mutex_lock(&st->cmd_lock);
+	st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
+	st->param.ec_rate.data = min(U16_MAX, latency);
+	ret = cros_ec_motion_send_host_cmd(st, 0);
+	if (ret < 0) {
+		mutex_unlock(&st->cmd_lock);
+		return ret;
+	}
+
+	/*
+	 * Flush samples currently in the FIFO, especially when the new latency
+	 * is shorter than the old one: new timeout value is only considered when
+	 * there is a new sample available. It can take a while for a slow
+	 * sensor.
+	 */
+	st->param.cmd = MOTIONSENSE_CMD_FIFO_FLUSH;
+	ret = cros_ec_motion_send_host_cmd(st, 0);
+	mutex_unlock(&st->cmd_lock);
+	if (ret < 0)
+		return ret;
+
+	return len;
+}
+
+static ssize_t cros_ec_sensor_get_report_latency(struct device *dev,
+						 struct device_attribute *attr,
+						 char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int latency, ret;
+
+	mutex_lock(&st->cmd_lock);
+	st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
+	st->param.ec_rate.data = EC_MOTION_SENSE_NO_VALUE;
+
+	ret = cros_ec_motion_send_host_cmd(st, 0);
+	latency = st->resp->ec_rate.ret;
+	mutex_unlock(&st->cmd_lock);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d.%06u\n",
+		       latency / 1000,
+		       (latency % 1000) * 1000);
+}
+
+static IIO_DEVICE_ATTR(hwfifo_timeout, 0644,
+		       cros_ec_sensor_get_report_latency,
+		       cros_ec_sensor_set_report_latency, 0);
+
+static ssize_t hwfifo_watermark_max_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+
+	return sprintf(buf, "%d\n", st->fifo_max_event_count);
+}
+
+static IIO_DEVICE_ATTR_RO(hwfifo_watermark_max, 0);
+
+static const struct iio_dev_attr *cros_ec_sensor_fifo_attributes[] = {
+	&iio_dev_attr_hwfifo_timeout,
+	&iio_dev_attr_hwfifo_watermark_max,
+	NULL,
+};
+
+int cros_ec_sensors_push_data(struct iio_dev *indio_dev,
+			      s16 *data,
+			      s64 timestamp)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	s16 *out;
+	s64 delta;
+	unsigned int i;
+
+	/*
+	 * Ignore samples if the buffer is not set: it is needed if the ODR is
+	 * set but the buffer is not enabled yet.
+	 */
+	if (!iio_device_try_claim_buffer_mode(indio_dev))
+		return 0;
+
+	out = (s16 *)st->samples;
+	iio_for_each_active_channel(indio_dev, i) {
+		*out = data[i];
+		out++;
+	}
+
+	if (iio_device_get_clock(indio_dev) != CLOCK_BOOTTIME)
+		delta = iio_get_time_ns(indio_dev) - cros_ec_get_time_ns();
+	else
+		delta = 0;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, st->samples,
+					   timestamp + delta);
+
+	iio_device_release_buffer_mode(indio_dev);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_push_data);
+
+static void cros_ec_sensors_core_clean(void *arg)
+{
+	struct platform_device *pdev = (struct platform_device *)arg;
+	struct cros_ec_sensorhub *sensor_hub =
+		dev_get_drvdata(pdev->dev.parent);
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	u8 sensor_num = st->param.info.sensor_num;
+
+	cros_ec_sensorhub_unregister_push_data(sensor_hub, sensor_num);
+}
+
+/**
+ * cros_ec_sensors_core_init() - basic initialization of the core structure
+ * @pdev:		platform device created for the sensor
+ * @indio_dev:		iio device structure of the device
+ * @physical_device:	true if the device refers to a physical device
+ * @trigger_capture:    function pointer to call buffer is triggered,
+ *    for backward compatibility.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+int cros_ec_sensors_core_init(struct platform_device *pdev,
+			      struct iio_dev *indio_dev,
+			      bool physical_device,
+			      cros_ec_sensors_capture_t trigger_capture)
+{
+	struct device *dev = &pdev->dev;
+	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
+	struct cros_ec_sensorhub *sensor_hub = dev_get_drvdata(dev->parent);
+	struct cros_ec_dev *ec = sensor_hub->ec;
+	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
+	u32 ver_mask, temp;
+	int frequencies[ARRAY_SIZE(state->frequencies) / 2] = { 0 };
+	int ret, i;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	state->ec = ec->ec_dev;
+	state->msg = devm_kzalloc(&pdev->dev, sizeof(*state->msg) +
+				max((u16)sizeof(struct ec_params_motion_sense),
+				state->ec->max_response), GFP_KERNEL);
+	if (!state->msg)
+		return -ENOMEM;
+
+	state->resp = (struct ec_response_motion_sense *)state->msg->data;
+
+	mutex_init(&state->cmd_lock);
+
+	ret = cros_ec_get_host_cmd_version_mask(state->ec,
+						ec->cmd_offset,
+						EC_CMD_MOTION_SENSE_CMD,
+						&ver_mask);
+	if (ret < 0)
+		return ret;
+
+	/* Set up the host command structure. */
+	state->msg->version = fls(ver_mask) - 1;
+	state->msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
+	state->msg->outsize = sizeof(struct ec_params_motion_sense);
+
+	indio_dev->name = pdev->name;
+
+	if (physical_device) {
+		enum motionsensor_location loc;
+
+		state->param.cmd = MOTIONSENSE_CMD_INFO;
+		state->param.info.sensor_num = sensor_platform->sensor_num;
+		ret = cros_ec_motion_send_host_cmd(state, 0);
+		if (ret) {
+			dev_warn(dev, "Can not access sensor info\n");
+			return ret;
+		}
+		state->type = state->resp->info.type;
+		loc = state->resp->info.location;
+		if (loc == MOTIONSENSE_LOC_BASE)
+			indio_dev->label = "accel-base";
+		else if (loc == MOTIONSENSE_LOC_LID)
+			indio_dev->label = "accel-display";
+		else if (loc == MOTIONSENSE_LOC_CAMERA)
+			indio_dev->label = "accel-camera";
+
+		/* Set sign vector, only used for backward compatibility. */
+		memset(state->sign, 1, CROS_EC_SENSOR_MAX_AXIS);
+
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			state->calib[i].scale = MOTION_SENSE_DEFAULT_SCALE;
+
+		/* 0 is a correct value used to stop the device */
+		if (state->msg->version < 3) {
+			get_default_min_max_freq(state->resp->info.type,
+						 &frequencies[1],
+						 &frequencies[2],
+						 &state->fifo_max_event_count);
+		} else {
+			if (state->resp->info_3.max_frequency == 0) {
+				get_default_min_max_freq(state->resp->info.type,
+							 &frequencies[1],
+							 &frequencies[2],
+							 &temp);
+			} else {
+				frequencies[1] = state->resp->info_3.min_frequency;
+				frequencies[2] = state->resp->info_3.max_frequency;
+			}
+			state->fifo_max_event_count = state->resp->info_3.fifo_max_event_count;
+		}
+		for (i = 0; i < ARRAY_SIZE(frequencies); i++) {
+			state->frequencies[2 * i] = frequencies[i] / 1000;
+			state->frequencies[2 * i + 1] =
+				(frequencies[i] % 1000) * 1000;
+		}
+
+		if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO)) {
+			/*
+			 * Create a software buffer, feed by the EC FIFO.
+			 * We can not use trigger here, as events are generated
+			 * as soon as sample_frequency is set.
+			 */
+			ret = devm_iio_kfifo_buffer_setup_ext(dev, indio_dev, NULL,
+							      cros_ec_sensor_fifo_attributes);
+			if (ret)
+				return ret;
+
+			/* Timestamp coming from FIFO are in ns since boot. */
+			ret = iio_device_set_clock(indio_dev, CLOCK_BOOTTIME);
+			if (ret)
+				return ret;
+
+		} else {
+			/*
+			 * The only way to get samples in buffer is to set a
+			 * software trigger (systrig, hrtimer).
+			 */
+			ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+					NULL, trigger_capture, NULL);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_init);
+
+/**
+ * cros_ec_sensors_core_register() - Register callback to FIFO and IIO when
+ * sensor is ready.
+ * It must be called at the end of the sensor probe routine.
+ * @dev:		device created for the sensor
+ * @indio_dev:		iio device structure of the device
+ * @push_data:          function to call when cros_ec_sensorhub receives
+ *    a sample for that sensor.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+int cros_ec_sensors_core_register(struct device *dev,
+				  struct iio_dev *indio_dev,
+				  cros_ec_sensorhub_push_data_cb_t push_data)
+{
+	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
+	struct cros_ec_sensorhub *sensor_hub = dev_get_drvdata(dev->parent);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct cros_ec_dev *ec = sensor_hub->ec;
+	int ret;
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return ret;
+
+	if (!push_data ||
+	    !cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO))
+		return 0;
+
+	ret = cros_ec_sensorhub_register_push_data(
+			sensor_hub, sensor_platform->sensor_num,
+			indio_dev, push_data);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(
+			dev, cros_ec_sensors_core_clean, pdev);
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_register);
+
+/**
+ * cros_ec_motion_send_host_cmd() - send motion sense host command
+ * @state:		pointer to state information for device
+ * @opt_length:	optional length to reduce the response size, useful on the data
+ *		path. Otherwise, the maximal allowed response size is used
+ *
+ * When called, the sub-command is assumed to be set in param->cmd.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *state,
+				 u16 opt_length)
+{
+	struct ec_response_motion_sense *resp = (struct ec_response_motion_sense *)state->msg->data;
+	int ret;
+
+	if (opt_length)
+		state->msg->insize = min(opt_length, state->ec->max_response);
+	else
+		state->msg->insize = state->ec->max_response;
+
+	memcpy(state->msg->data, &state->param, sizeof(state->param));
+
+	ret = cros_ec_cmd_xfer_status(state->ec, state->msg);
+	trace_cros_ec_motion_host_cmd(&state->param, resp, ret);
+	if (ret < 0)
+		return ret;
+
+	if (ret && state->resp != resp)
+		memcpy(state->resp, resp, ret);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_motion_send_host_cmd);
+
+static ssize_t cros_ec_sensors_calibrate(struct iio_dev *indio_dev,
+		uintptr_t private, const struct iio_chan_spec *chan,
+		const char *buf, size_t len)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret, i;
+	bool calibrate;
+
+	ret = kstrtobool(buf, &calibrate);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&st->cmd_lock);
+	st->param.cmd = MOTIONSENSE_CMD_PERFORM_CALIB;
+	st->param.perform_calib.enable = calibrate;
+	ret = cros_ec_motion_send_host_cmd(st, 0);
+	if (ret != 0) {
+		dev_warn(&indio_dev->dev, "Unable to calibrate sensor: %d\n",
+			 ret);
+	} else {
+		/* Save values */
+		for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
+			st->calib[i].offset = st->resp->perform_calib.offset[i];
+	}
+	mutex_unlock(&st->cmd_lock);
+
+	return ret ? ret : len;
+}
+
+static ssize_t cros_ec_sensors_id(struct iio_dev *indio_dev,
+				  uintptr_t private,
+				  const struct iio_chan_spec *chan, char *buf)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", st->param.info.sensor_num);
+}
+
+const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[] = {
+	{
+		.name = "calibrate",
+		.shared = IIO_SHARED_BY_ALL,
+		.write = cros_ec_sensors_calibrate
+	},
+	{
+		.name = "id",
+		.shared = IIO_SHARED_BY_ALL,
+		.read = cros_ec_sensors_id
+	},
+	{ }
+};
+EXPORT_SYMBOL_GPL(cros_ec_sensors_ext_info);
+
+const struct iio_chan_spec_ext_info cros_ec_sensors_limited_info[] = {
+	{
+		.name = "id",
+		.shared = IIO_SHARED_BY_ALL,
+		.read = cros_ec_sensors_id
+	},
+	{ }
+};
+EXPORT_SYMBOL_GPL(cros_ec_sensors_limited_info);
+
+/**
+ * cros_ec_sensors_idx_to_reg - convert index into offset in shared memory
+ * @st:		pointer to state information for device
+ * @idx:	sensor index (should be element of enum sensor_index)
+ *
+ * Return:	address to read at
+ */
+static unsigned int cros_ec_sensors_idx_to_reg(
+					struct cros_ec_sensors_core_state *st,
+					unsigned int idx)
+{
+	/*
+	 * When using LPC interface, only space for 2 Accel and one Gyro.
+	 * First halfword of MOTIONSENSE_TYPE_ACCEL is used by angle.
+	 */
+	if (st->type == MOTIONSENSE_TYPE_ACCEL)
+		return EC_MEMMAP_ACC_DATA + sizeof(u16) *
+			(1 + idx + st->param.info.sensor_num *
+			 CROS_EC_SENSOR_MAX_AXIS);
+
+	return EC_MEMMAP_GYRO_DATA + sizeof(u16) * idx;
+}
+
+static int cros_ec_sensors_cmd_read_u8(struct cros_ec_device *ec,
+				       unsigned int offset, u8 *dest)
+{
+	return ec->cmd_readmem(ec, offset, 1, dest);
+}
+
+static int cros_ec_sensors_cmd_read_u16(struct cros_ec_device *ec,
+					 unsigned int offset, u16 *dest)
+{
+	__le16 tmp;
+	int ret = ec->cmd_readmem(ec, offset, 2, &tmp);
+
+	if (ret >= 0)
+		*dest = le16_to_cpu(tmp);
+
+	return ret;
+}
+
+/**
+ * cros_ec_sensors_read_until_not_busy() - read until is not busy
+ *
+ * @st:	pointer to state information for device
+ *
+ * Read from EC status byte until it reads not busy.
+ * Return: 8-bit status if ok, -errno on failure.
+ */
+static int cros_ec_sensors_read_until_not_busy(
+					struct cros_ec_sensors_core_state *st)
+{
+	struct cros_ec_device *ec = st->ec;
+	u8 status;
+	int ret, attempts = 0;
+
+	ret = cros_ec_sensors_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	while (status & EC_MEMMAP_ACC_STATUS_BUSY_BIT) {
+		/* Give up after enough attempts, return error. */
+		if (attempts++ >= 50)
+			return -EIO;
+
+		/* Small delay every so often. */
+		if (attempts % 5 == 0)
+			msleep(25);
+
+		ret = cros_ec_sensors_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS,
+						  &status);
+		if (ret < 0)
+			return ret;
+	}
+
+	return status;
+}
+
+/**
+ * cros_ec_sensors_read_data_unsafe() - read acceleration data from EC shared memory
+ * @indio_dev:	pointer to IIO device
+ * @scan_mask:	bitmap of the sensor indices to scan
+ * @data:	location to store data
+ *
+ * This is the unsafe function for reading the EC data. It does not guarantee
+ * that the EC will not modify the data as it is being read in.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+static int cros_ec_sensors_read_data_unsafe(struct iio_dev *indio_dev,
+			 unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	struct cros_ec_device *ec = st->ec;
+	unsigned int i;
+	int ret;
+
+	/* Read all sensors enabled in scan_mask. Each value is 2 bytes. */
+	for_each_set_bit(i, &scan_mask, iio_get_masklength(indio_dev)) {
+		ret = cros_ec_sensors_cmd_read_u16(ec,
+					     cros_ec_sensors_idx_to_reg(st, i),
+					     data);
+		if (ret < 0)
+			return ret;
+
+		*data *= st->sign[i];
+		data++;
+	}
+
+	return 0;
+}
+
+/**
+ * cros_ec_sensors_read_lpc() - read acceleration data from EC shared memory.
+ * @indio_dev: pointer to IIO device.
+ * @scan_mask: bitmap of the sensor indices to scan.
+ * @data: location to store data.
+ *
+ * Note: this is the safe function for reading the EC data. It guarantees
+ * that the data sampled was not modified by the EC while being read.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+int cros_ec_sensors_read_lpc(struct iio_dev *indio_dev,
+			     unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	struct cros_ec_device *ec = st->ec;
+	u8 samp_id = 0xff, status = 0;
+	int ret, attempts = 0;
+
+	/*
+	 * Continually read all data from EC until the status byte after
+	 * all reads reflects that the EC is not busy and the sample id
+	 * matches the sample id from before all reads. This guarantees
+	 * that data read in was not modified by the EC while reading.
+	 */
+	while ((status & (EC_MEMMAP_ACC_STATUS_BUSY_BIT |
+			  EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK)) != samp_id) {
+		/* If we have tried to read too many times, return error. */
+		if (attempts++ >= 5)
+			return -EIO;
+
+		/* Read status byte until EC is not busy. */
+		ret = cros_ec_sensors_read_until_not_busy(st);
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * Store the current sample id so that we can compare to the
+		 * sample id after reading the data.
+		 */
+		samp_id = ret & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK;
+
+		/* Read all EC data, format it, and store it into data. */
+		ret = cros_ec_sensors_read_data_unsafe(indio_dev, scan_mask,
+						       data);
+		if (ret < 0)
+			return ret;
+
+		/* Read status byte. */
+		ret = cros_ec_sensors_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS,
+						  &status);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_read_lpc);
+
+/**
+ * cros_ec_sensors_read_cmd() - retrieve data using the EC command protocol
+ * @indio_dev:	pointer to IIO device
+ * @scan_mask:	bitmap of the sensor indices to scan
+ * @data:	location to store data
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+int cros_ec_sensors_read_cmd(struct iio_dev *indio_dev,
+			     unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret;
+	unsigned int i;
+
+	/* Read all sensor data through a command. */
+	st->param.cmd = MOTIONSENSE_CMD_DATA;
+	ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->data));
+	if (ret != 0) {
+		dev_warn(&indio_dev->dev, "Unable to read sensor data\n");
+		return ret;
+	}
+
+	for_each_set_bit(i, &scan_mask, iio_get_masklength(indio_dev)) {
+		*data = st->resp->data.data[i];
+		data++;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_read_cmd);
+
+/**
+ * cros_ec_sensors_capture() - the trigger handler function
+ * @irq:	the interrupt number.
+ * @p:		a pointer to the poll function.
+ *
+ * On a trigger event occurring, if the pollfunc is attached then this
+ * handler is called as a threaded interrupt (and hence may sleep). It
+ * is responsible for grabbing data from the device and pushing it into
+ * the associated buffer.
+ *
+ * Return: IRQ_HANDLED
+ */
+irqreturn_t cros_ec_sensors_capture(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&st->cmd_lock);
+
+	/* Clear capture data. */
+	memset(st->samples, 0, indio_dev->scan_bytes);
+
+	/* Read data based on which channels are enabled in scan mask. */
+	ret = st->read_ec_sensors_data(indio_dev,
+				       *(indio_dev->active_scan_mask),
+				       (s16 *)st->samples);
+	if (ret < 0)
+		goto done;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, st->samples,
+					   iio_get_time_ns(indio_dev));
+
+done:
+	/*
+	 * Tell the core we are done with this trigger and ready for the
+	 * next one.
+	 */
+	iio_trigger_notify_done(indio_dev->trig);
+
+	mutex_unlock(&st->cmd_lock);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_capture);
+
+/**
+ * cros_ec_sensors_core_read() - function to request a value from the sensor
+ * @st:		pointer to state information for device
+ * @chan:	channel specification structure table
+ * @val:	will contain one element making up the returned value
+ * @val2:	will contain another element making up the returned value
+ * @mask:	specifies which values to be requested
+ *
+ * Return:	the type of value returned by the device
+ */
+int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	int ret, frequency;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
+		st->param.sensor_odr.data =
+			EC_MOTION_SENSE_NO_VALUE;
+
+		ret = cros_ec_motion_send_host_cmd(st, 0);
+		if (ret)
+			break;
+
+		frequency = st->resp->sensor_odr.ret;
+		*val = frequency / 1000;
+		*val2 = (frequency % 1000) * 1000;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_read);
+
+/**
+ * cros_ec_sensors_core_read_avail() - get available values
+ * @indio_dev:		pointer to state information for device
+ * @chan:	channel specification structure table
+ * @vals:	list of available values
+ * @type:	type of data returned
+ * @length:	number of data returned in the array
+ * @mask:	specifies which values to be requested
+ *
+ * Return:	an error code, IIO_AVAIL_RANGE or IIO_AVAIL_LIST
+ */
+int cros_ec_sensors_core_read_avail(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan,
+				    const int **vals,
+				    int *type,
+				    int *length,
+				    long mask)
+{
+	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*length = ARRAY_SIZE(state->frequencies);
+		*vals = (const int *)&state->frequencies;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		return IIO_AVAIL_LIST;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_read_avail);
+
+/**
+ * cros_ec_sensors_core_write() - function to write a value to the sensor
+ * @st:		pointer to state information for device
+ * @chan:	channel specification structure table
+ * @val:	first part of value to write
+ * @val2:	second part of value to write
+ * @mask:	specifies which values to write
+ *
+ * Return:	the type of value returned by the device
+ */
+int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask)
+{
+	int ret, frequency;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		frequency = val * 1000 + val2 / 1000;
+		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
+		st->param.sensor_odr.data = frequency;
+
+		/* Always roundup, so caller gets at least what it asks for. */
+		st->param.sensor_odr.roundup = 1;
+
+		ret = cros_ec_motion_send_host_cmd(st, 0);
+		if (ret)
+			break;
+
+		/* Flush the FIFO when a sensor is stopped.
+		 * If the FIFO has just been emptied, pending samples will be
+		 * stuck until new samples are available. It will not happen
+		 * when all the sensors are stopped.
+		 */
+		if (frequency == 0) {
+			st->param.cmd = MOTIONSENSE_CMD_FIFO_FLUSH;
+			ret = cros_ec_motion_send_host_cmd(st, 0);
+		}
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_write);
+
+static int __maybe_unused cros_ec_sensors_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret = 0;
+
+	if (st->range_updated) {
+		mutex_lock(&st->cmd_lock);
+		st->param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
+		st->param.sensor_range.data = st->curr_range;
+		st->param.sensor_range.roundup = 1;
+		ret = cros_ec_motion_send_host_cmd(st, 0);
+		mutex_unlock(&st->cmd_lock);
+	}
+	return ret;
+}
+
+SIMPLE_DEV_PM_OPS(cros_ec_sensors_pm_ops, NULL, cros_ec_sensors_resume);
+EXPORT_SYMBOL_GPL(cros_ec_sensors_pm_ops);
+
+MODULE_DESCRIPTION("ChromeOS EC sensor hub core functions");
+MODULE_LICENSE("GPL v2");

linux-7.2.3/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_trace.c

@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+// Trace events for the ChromeOS Embedded Controller
+//
+// Copyright 2025 Google LLC.
+
+#define TRACE_SYMBOL(a) {a, #a}
+
+// Generate the list using the following script:
+// sed -n 's/^.*\(MOTIONSENSE_CMD.*\) = .*,$/\tTRACE_SYMBOL(\1), \\/p' include/linux/platform_data/cros_ec_commands.h
+#define MOTIONSENSE_CMDS \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_DUMP), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_INFO), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_EC_RATE), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_SENSOR_ODR), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_SENSOR_RANGE), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_KB_WAKE_ANGLE), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_DATA), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_FIFO_INFO), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_FIFO_FLUSH), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_FIFO_READ), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_PERFORM_CALIB), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_SENSOR_OFFSET), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_LIST_ACTIVITIES), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_SET_ACTIVITY), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_LID_ANGLE), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_FIFO_INT_ENABLE), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_SPOOF), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE), \
+	TRACE_SYMBOL(MOTIONSENSE_CMD_SENSOR_SCALE)
+
+#define CREATE_TRACE_POINTS
+#include "cros_ec_sensors_trace.h"

linux-7.2.3/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_trace.h

@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Trace events for the ChromeOS Embedded Controller
+ *
+ * Copyright 2025 Google LLC.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM cros_ec
+
+#if !defined(_CROS_EC_SENSORS_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _CROS_EC_SENSORS_TRACE_H_
+
+#include <linux/bits.h>
+#include <linux/types.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(cros_ec_motion_host_cmd,
+	    TP_PROTO(struct ec_params_motion_sense *param,
+		     struct ec_response_motion_sense *resp,
+		     int retval),
+	    TP_ARGS(param, resp, retval),
+	    TP_STRUCT__entry(__field(uint8_t, cmd)
+			     __field(uint8_t, sensor_id)
+			     __field(uint32_t, data)
+			     __field(int, retval)
+			     __field(int32_t, ret)
+	    ),
+	    TP_fast_assign(__entry->cmd = param->cmd;
+			   __entry->sensor_id = param->sensor_odr.sensor_num;
+			   __entry->data = param->sensor_odr.data;
+			   __entry->retval = retval;
+			   __entry->ret = retval > 0 ? resp->sensor_odr.ret : -1;
+	    ),
+	    TP_printk("%s, id: %d, data: %u, result: %u, return: %d",
+		      __print_symbolic(__entry->cmd, MOTIONSENSE_CMDS),
+		      __entry->sensor_id,
+		      __entry->data,
+		      __entry->retval,
+		      __entry->ret)
+);
+
+#endif /* _CROS_EC_SENSORS_TRACE_H_ */
+
+/* this part must be outside header guard */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH ../../drivers/iio/common/cros_ec_sensors
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE cros_ec_sensors_trace
+
+#include <trace/define_trace.h>