Resguardo inicial

linux-7.2.3/drivers/media/cec/i2c/Kconfig

@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# I2C drivers
+
+config CEC_CH7322
+	tristate "Chrontel CH7322 CEC controller"
+	depends on I2C
+	select REGMAP
+	select REGMAP_I2C
+	select CEC_CORE
+	help
+	  This is a driver for the Chrontel CH7322 CEC controller. It uses the
+	  generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_NXP_TDA9950
+	tristate "NXP Semiconductors TDA9950/TDA998X HDMI CEC"
+	depends on I2C
+	select CEC_NOTIFIER
+	select CEC_CORE
+	default DRM_I2C_NXP_TDA998X
+	help
+	  This is a driver for the NXP TDA9950 CEC controller and for the CEC
+	  controller block integrated into several NXP TDA998x HDMI encoders.

linux-7.2.3/drivers/media/cec/i2c/Makefile

@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the CEC I2C device drivers.
+#
+obj-$(CONFIG_CEC_CH7322) += ch7322.o
+obj-$(CONFIG_CEC_NXP_TDA9950) += tda9950.o

linux-7.2.3/drivers/media/cec/i2c/ch7322.c

@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Chrontel CH7322 CEC Controller
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/*
+ * Notes
+ *
+ * - This device powers on in Auto Mode which has limited functionality. This
+ *   driver disables Auto Mode when it attaches.
+ *
+ */
+
+#include <linux/cec.h>
+#include <linux/dmi.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/regmap.h>
+#include <media/cec.h>
+#include <media/cec-notifier.h>
+
+#define CH7322_WRITE		0x00
+#define CH7322_WRITE_MSENT		0x80
+#define CH7322_WRITE_BOK		0x40
+#define CH7322_WRITE_NMASK		0x0f
+
+/* Write buffer is 0x01-0x10 */
+#define CH7322_WRBUF		0x01
+#define CH7322_WRBUF_LEN	0x10
+
+#define CH7322_READ		0x40
+#define CH7322_READ_NRDT		0x80
+#define CH7322_READ_MSENT		0x20
+#define CH7322_READ_NMASK		0x0f
+
+/* Read buffer is 0x41-0x50 */
+#define CH7322_RDBUF		0x41
+#define CH7322_RDBUF_LEN	0x10
+
+#define CH7322_MODE		0x11
+#define CH7322_MODE_AUTO		0x78
+#define CH7322_MODE_SW			0xb5
+
+#define CH7322_RESET		0x12
+#define CH7322_RESET_RST		0x00
+
+#define CH7322_POWER		0x13
+#define CH7322_POWER_FPD		0x04
+
+#define CH7322_CFG0		0x17
+#define CH7322_CFG0_EOBEN		0x40
+#define CH7322_CFG0_PEOB		0x20
+#define CH7322_CFG0_CLRSPP		0x10
+#define CH7322_CFG0_FLOW		0x08
+
+#define CH7322_CFG1		0x1a
+#define CH7322_CFG1_STDBYO		0x04
+#define CH7322_CFG1_HPBP		0x02
+#define CH7322_CFG1_PIO			0x01
+
+#define CH7322_INTCTL		0x1b
+#define CH7322_INTCTL_INTPB		0x80
+#define CH7322_INTCTL_STDBY		0x40
+#define CH7322_INTCTL_HPDFALL		0x20
+#define CH7322_INTCTL_HPDRISE		0x10
+#define CH7322_INTCTL_RXMSG		0x08
+#define CH7322_INTCTL_TXMSG		0x04
+#define CH7322_INTCTL_NEWPHA		0x02
+#define CH7322_INTCTL_ERROR		0x01
+
+#define CH7322_DVCLKFNH	0x1d
+#define CH7322_DVCLKFNL	0x1e
+
+#define CH7322_CTL		0x31
+#define CH7322_CTL_FSTDBY		0x80
+#define CH7322_CTL_PLSEN		0x40
+#define CH7322_CTL_PLSPB		0x20
+#define CH7322_CTL_SPADL		0x10
+#define CH7322_CTL_HINIT		0x08
+#define CH7322_CTL_WPHYA		0x04
+#define CH7322_CTL_H1T			0x02
+#define CH7322_CTL_S1T			0x01
+
+#define CH7322_PAWH		0x32
+#define CH7322_PAWL		0x33
+
+#define CH7322_ADDLW		0x34
+#define CH7322_ADDLW_MASK	0xf0
+
+#define CH7322_ADDLR		0x3d
+#define CH7322_ADDLR_HPD		0x80
+#define CH7322_ADDLR_MASK		0x0f
+
+#define CH7322_INTDATA		0x3e
+#define CH7322_INTDATA_MODE		0x80
+#define CH7322_INTDATA_STDBY		0x40
+#define CH7322_INTDATA_HPDFALL		0x20
+#define CH7322_INTDATA_HPDRISE		0x10
+#define CH7322_INTDATA_RXMSG		0x08
+#define CH7322_INTDATA_TXMSG		0x04
+#define CH7322_INTDATA_NEWPHA		0x02
+#define CH7322_INTDATA_ERROR		0x01
+
+#define CH7322_EVENT		0x3f
+#define CH7322_EVENT_TXERR		0x80
+#define CH7322_EVENT_HRST		0x40
+#define CH7322_EVENT_HFST		0x20
+#define CH7322_EVENT_PHACHG		0x10
+#define CH7322_EVENT_ACTST		0x08
+#define CH7322_EVENT_PHARDY		0x04
+#define CH7322_EVENT_BSOK		0x02
+#define CH7322_EVENT_ERRADCF		0x01
+
+#define CH7322_DID		0x51
+#define CH7322_DID_CH7322		0x5b
+#define CH7322_DID_CH7323		0x5f
+
+#define CH7322_REVISIONID	0x52
+
+#define CH7322_PARH		0x53
+#define CH7322_PARL		0x54
+
+#define CH7322_IOCFG2		0x75
+#define CH7322_IOCFG_CIO		0x80
+#define CH7322_IOCFG_IOCFGMASK		0x78
+#define CH7322_IOCFG_AUDIO		0x04
+#define CH7322_IOCFG_SPAMST		0x02
+#define CH7322_IOCFG_SPAMSP		0x01
+
+#define CH7322_CTL3		0x7b
+#define CH7322_CTL3_SWENA		0x80
+#define CH7322_CTL3_FC_INIT		0x40
+#define CH7322_CTL3_SML_FL		0x20
+#define CH7322_CTL3_SM_RDST		0x10
+#define CH7322_CTL3_SPP_CIAH		0x08
+#define CH7322_CTL3_SPP_CIAL		0x04
+#define CH7322_CTL3_SPP_ACTH		0x02
+#define CH7322_CTL3_SPP_ACTL		0x01
+
+/* BOK status means NACK */
+#define CH7322_TX_FLAG_NACK	BIT(0)
+/* Device will retry automatically */
+#define CH7322_TX_FLAG_RETRY	BIT(1)
+
+struct ch7322 {
+	struct i2c_client *i2c;
+	struct regmap *regmap;
+	struct cec_adapter *cec;
+	struct mutex mutex;	/* device access mutex */
+	u8 tx_flags;
+};
+
+static const struct regmap_config ch7322_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x7f,
+	.disable_locking = true,
+};
+
+static int ch7322_send_message(struct ch7322 *ch7322, const struct cec_msg *msg)
+{
+	unsigned int val;
+	unsigned int len = msg->len;
+	int ret;
+	int i;
+
+	WARN_ON(!mutex_is_locked(&ch7322->mutex));
+
+	if (len > CH7322_WRBUF_LEN || len < 1)
+		return -EINVAL;
+
+	ret = regmap_read(ch7322->regmap, CH7322_WRITE, &val);
+	if (ret)
+		return ret;
+
+	/* Buffer not ready */
+	if (!(val & CH7322_WRITE_MSENT))
+		return -EBUSY;
+
+	if (cec_msg_opcode(msg) == -1 &&
+	    cec_msg_initiator(msg) == cec_msg_destination(msg)) {
+		ch7322->tx_flags = CH7322_TX_FLAG_NACK | CH7322_TX_FLAG_RETRY;
+	} else if (cec_msg_is_broadcast(msg)) {
+		ch7322->tx_flags = CH7322_TX_FLAG_NACK;
+	} else {
+		ch7322->tx_flags = CH7322_TX_FLAG_RETRY;
+	}
+
+	ret = regmap_write(ch7322->regmap, CH7322_WRITE, len - 1);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < len; i++) {
+		ret = regmap_write(ch7322->regmap,
+				   CH7322_WRBUF + i, msg->msg[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int ch7322_receive_message(struct ch7322 *ch7322, struct cec_msg *msg)
+{
+	unsigned int val;
+	int ret = 0;
+	int i;
+
+	WARN_ON(!mutex_is_locked(&ch7322->mutex));
+
+	ret = regmap_read(ch7322->regmap, CH7322_READ, &val);
+	if (ret)
+		return ret;
+
+	/* Message not ready */
+	if (!(val & CH7322_READ_NRDT))
+		return -EIO;
+
+	msg->len = (val & CH7322_READ_NMASK) + 1;
+
+	/* Read entire RDBUF to clear state */
+	for (i = 0; i < CH7322_RDBUF_LEN; i++) {
+		ret = regmap_read(ch7322->regmap, CH7322_RDBUF + i, &val);
+		if (ret)
+			return ret;
+		msg->msg[i] = (u8)val;
+	}
+
+	return 0;
+}
+
+static void ch7322_tx_done(struct ch7322 *ch7322)
+{
+	int ret;
+	unsigned int val;
+	u8 status, flags;
+
+	mutex_lock(&ch7322->mutex);
+	ret = regmap_read(ch7322->regmap, CH7322_WRITE, &val);
+	flags = ch7322->tx_flags;
+	mutex_unlock(&ch7322->mutex);
+
+	/*
+	 * The device returns a one-bit OK status which usually means ACK but
+	 * actually means NACK when sending a logical address query or a
+	 * broadcast.
+	 */
+	if (ret)
+		status = CEC_TX_STATUS_ERROR;
+	else if ((val & CH7322_WRITE_BOK) && (flags & CH7322_TX_FLAG_NACK))
+		status = CEC_TX_STATUS_NACK;
+	else if (val & CH7322_WRITE_BOK)
+		status = CEC_TX_STATUS_OK;
+	else if (flags & CH7322_TX_FLAG_NACK)
+		status = CEC_TX_STATUS_OK;
+	else
+		status = CEC_TX_STATUS_NACK;
+
+	if (status == CEC_TX_STATUS_NACK && (flags & CH7322_TX_FLAG_RETRY))
+		status |= CEC_TX_STATUS_MAX_RETRIES;
+
+	cec_transmit_attempt_done(ch7322->cec, status);
+}
+
+static void ch7322_rx_done(struct ch7322 *ch7322)
+{
+	struct cec_msg msg;
+	int ret;
+
+	mutex_lock(&ch7322->mutex);
+	ret = ch7322_receive_message(ch7322, &msg);
+	mutex_unlock(&ch7322->mutex);
+
+	if (ret)
+		dev_err(&ch7322->i2c->dev, "cec receive error: %d\n", ret);
+	else
+		cec_received_msg(ch7322->cec, &msg);
+}
+
+/*
+ * This device can either monitor the DDC lines to obtain the physical address
+ * or it can allow the host to program it. This driver lets the device obtain
+ * it.
+ */
+static void ch7322_phys_addr(struct ch7322 *ch7322)
+{
+	unsigned int pah, pal;
+	int ret = 0;
+
+	mutex_lock(&ch7322->mutex);
+	ret |= regmap_read(ch7322->regmap, CH7322_PARH, &pah);
+	ret |= regmap_read(ch7322->regmap, CH7322_PARL, &pal);
+	mutex_unlock(&ch7322->mutex);
+
+	if (ret)
+		dev_err(&ch7322->i2c->dev, "phys addr error\n");
+	else
+		cec_s_phys_addr(ch7322->cec, pal | (pah << 8), false);
+}
+
+static irqreturn_t ch7322_irq(int irq, void *dev)
+{
+	struct ch7322 *ch7322 = dev;
+	unsigned int data = 0;
+
+	mutex_lock(&ch7322->mutex);
+	regmap_read(ch7322->regmap, CH7322_INTDATA, &data);
+	regmap_write(ch7322->regmap, CH7322_INTDATA, data);
+	mutex_unlock(&ch7322->mutex);
+
+	if (data & CH7322_INTDATA_HPDFALL)
+		cec_phys_addr_invalidate(ch7322->cec);
+
+	if (data & CH7322_INTDATA_TXMSG)
+		ch7322_tx_done(ch7322);
+
+	if (data & CH7322_INTDATA_RXMSG)
+		ch7322_rx_done(ch7322);
+
+	if (data & CH7322_INTDATA_NEWPHA)
+		ch7322_phys_addr(ch7322);
+
+	if (data & CH7322_INTDATA_ERROR)
+		dev_dbg(&ch7322->i2c->dev, "unknown error\n");
+
+	return IRQ_HANDLED;
+}
+
+/* This device is always enabled */
+static int ch7322_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	return 0;
+}
+
+static int ch7322_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
+{
+	struct ch7322 *ch7322 = cec_get_drvdata(adap);
+	int ret;
+
+	mutex_lock(&ch7322->mutex);
+	ret = regmap_update_bits(ch7322->regmap, CH7322_ADDLW,
+				 CH7322_ADDLW_MASK, log_addr << 4);
+	mutex_unlock(&ch7322->mutex);
+
+	return ret;
+}
+
+static int ch7322_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				    u32 signal_free_time, struct cec_msg *msg)
+{
+	struct ch7322 *ch7322 = cec_get_drvdata(adap);
+	int ret;
+
+	mutex_lock(&ch7322->mutex);
+	ret = ch7322_send_message(ch7322, msg);
+	mutex_unlock(&ch7322->mutex);
+
+	return ret;
+}
+
+static const struct cec_adap_ops ch7322_cec_adap_ops = {
+	.adap_enable = ch7322_cec_adap_enable,
+	.adap_log_addr = ch7322_cec_adap_log_addr,
+	.adap_transmit = ch7322_cec_adap_transmit,
+};
+
+#if IS_ENABLED(CONFIG_PCI) && IS_ENABLED(CONFIG_DMI)
+
+struct ch7322_conn_match {
+	const char *dev_name;
+	const char *pci_name;
+	const char *port_name;
+};
+
+static struct ch7322_conn_match google_endeavour[] = {
+	{ "i2c-PRP0001:00", "0000:00:02.0", "Port B" },
+	{ "i2c-PRP0001:01", "0000:00:02.0", "Port C" },
+	{ },
+};
+
+static const struct dmi_system_id ch7322_dmi_table[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Google"),
+			DMI_MATCH(DMI_BOARD_NAME, "Endeavour"),
+		},
+		.driver_data = google_endeavour,
+	},
+	{ },
+};
+
+/* Make a best-effort attempt to locate a matching HDMI port */
+static int ch7322_get_port(struct i2c_client *client,
+			   struct device **dev,
+			   const char **port)
+{
+	const struct dmi_system_id *system;
+	const struct ch7322_conn_match *conn;
+
+	*dev = NULL;
+	*port = NULL;
+
+	system = dmi_first_match(ch7322_dmi_table);
+	if (!system)
+		return 0;
+
+	for (conn = system->driver_data; conn->dev_name; conn++) {
+		if (!strcmp(dev_name(&client->dev), conn->dev_name)) {
+			struct device *d;
+
+			d = bus_find_device_by_name(&pci_bus_type, NULL,
+						    conn->pci_name);
+			if (!d)
+				return -EPROBE_DEFER;
+
+			put_device(d);
+
+			*dev = d;
+			*port = conn->port_name;
+
+			return 0;
+		}
+	}
+
+	return 0;
+}
+
+#else
+
+static int ch7322_get_port(struct i2c_client *client,
+			   struct device **dev,
+			   const char **port)
+{
+	*dev = NULL;
+	*port = NULL;
+
+	return 0;
+}
+
+#endif
+
+static int ch7322_probe(struct i2c_client *client)
+{
+	struct device *hdmi_dev;
+	const char *port_name;
+	struct ch7322 *ch7322;
+	struct cec_notifier *notifier = NULL;
+	u32 caps = CEC_CAP_DEFAULTS;
+	int ret;
+	unsigned int val;
+
+	ret = ch7322_get_port(client, &hdmi_dev, &port_name);
+	if (ret)
+		return ret;
+
+	if (hdmi_dev)
+		caps |= CEC_CAP_CONNECTOR_INFO;
+
+	ch7322 = devm_kzalloc(&client->dev, sizeof(*ch7322), GFP_KERNEL);
+	if (!ch7322)
+		return -ENOMEM;
+
+	ch7322->regmap = devm_regmap_init_i2c(client, &ch7322_regmap);
+	if (IS_ERR(ch7322->regmap))
+		return PTR_ERR(ch7322->regmap);
+
+	ret = regmap_read(ch7322->regmap, CH7322_DID, &val);
+	if (ret)
+		return ret;
+
+	if (val != CH7322_DID_CH7322)
+		return -EOPNOTSUPP;
+
+	mutex_init(&ch7322->mutex);
+	ch7322->i2c = client;
+	ch7322->tx_flags = 0;
+
+	i2c_set_clientdata(client, ch7322);
+
+	/* Disable auto mode */
+	ret = regmap_write(ch7322->regmap, CH7322_MODE, CH7322_MODE_SW);
+	if (ret)
+		goto err_mutex;
+
+	/* Enable logical address register */
+	ret = regmap_update_bits(ch7322->regmap, CH7322_CTL,
+				 CH7322_CTL_SPADL, CH7322_CTL_SPADL);
+	if (ret)
+		goto err_mutex;
+
+	ch7322->cec = cec_allocate_adapter(&ch7322_cec_adap_ops, ch7322,
+					   dev_name(&client->dev),
+					   caps, 1);
+
+	if (IS_ERR(ch7322->cec)) {
+		ret = PTR_ERR(ch7322->cec);
+		goto err_mutex;
+	}
+
+	ch7322->cec->adap_controls_phys_addr = true;
+
+	if (hdmi_dev) {
+		notifier = cec_notifier_cec_adap_register(hdmi_dev,
+							  port_name,
+							  ch7322->cec);
+		if (!notifier) {
+			ret = -ENOMEM;
+			goto err_cec;
+		}
+	}
+
+	/* Configure, mask, and clear interrupt */
+	ret = regmap_write(ch7322->regmap, CH7322_CFG1, 0);
+	if (ret)
+		goto err_notifier;
+	ret = regmap_write(ch7322->regmap, CH7322_INTCTL, CH7322_INTCTL_INTPB);
+	if (ret)
+		goto err_notifier;
+	ret = regmap_write(ch7322->regmap, CH7322_INTDATA, 0xff);
+	if (ret)
+		goto err_notifier;
+
+	/* If HPD is up read physical address */
+	ret = regmap_read(ch7322->regmap, CH7322_ADDLR, &val);
+	if (ret)
+		goto err_notifier;
+	if (val & CH7322_ADDLR_HPD)
+		ch7322_phys_addr(ch7322);
+
+	ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					ch7322_irq,
+					IRQF_ONESHOT | IRQF_TRIGGER_RISING,
+					client->name, ch7322);
+	if (ret)
+		goto err_notifier;
+
+	/* Unmask interrupt */
+	mutex_lock(&ch7322->mutex);
+	ret = regmap_write(ch7322->regmap, CH7322_INTCTL, 0xff);
+	mutex_unlock(&ch7322->mutex);
+
+	if (ret)
+		goto err_notifier;
+
+	ret = cec_register_adapter(ch7322->cec, &client->dev);
+	if (ret)
+		goto err_notifier;
+
+	dev_info(&client->dev, "device registered\n");
+
+	return 0;
+
+err_notifier:
+	if (notifier)
+		cec_notifier_cec_adap_unregister(notifier, ch7322->cec);
+err_cec:
+	cec_delete_adapter(ch7322->cec);
+err_mutex:
+	mutex_destroy(&ch7322->mutex);
+	return ret;
+}
+
+static void ch7322_remove(struct i2c_client *client)
+{
+	struct ch7322 *ch7322 = i2c_get_clientdata(client);
+
+	/* Mask interrupt */
+	mutex_lock(&ch7322->mutex);
+	regmap_write(ch7322->regmap, CH7322_INTCTL, CH7322_INTCTL_INTPB);
+	mutex_unlock(&ch7322->mutex);
+
+	cec_unregister_adapter(ch7322->cec);
+	mutex_destroy(&ch7322->mutex);
+
+	dev_info(&client->dev, "device unregistered\n");
+}
+
+static const struct of_device_id ch7322_of_match[] = {
+	{ .compatible = "chrontel,ch7322", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ch7322_of_match);
+
+static struct i2c_driver ch7322_i2c_driver = {
+	.driver = {
+		.name = "ch7322",
+		.of_match_table = ch7322_of_match,
+	},
+	.probe		= ch7322_probe,
+	.remove		= ch7322_remove,
+};
+
+module_i2c_driver(ch7322_i2c_driver);
+
+MODULE_DESCRIPTION("Chrontel CH7322 CEC Controller Driver");
+MODULE_AUTHOR("Jeff Chase <jnchase@google.com>");
+MODULE_LICENSE("GPL");

linux-7.2.3/drivers/media/cec/i2c/tda9950.c

@@ -0,0 +1,507 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  TDA9950 Consumer Electronics Control driver
+ *
+ * The NXP TDA9950 implements the HDMI Consumer Electronics Control
+ * interface.  The host interface is similar to a mailbox: the data
+ * registers starting at REG_CDR0 are written to send a command to the
+ * internal CPU, and replies are read from these registers.
+ *
+ * As the data registers represent a mailbox, they must be accessed
+ * as a single I2C transaction.  See the TDA9950 data sheet for details.
+ */
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_data/tda9950.h>
+#include <linux/slab.h>
+#include <drm/drm_edid.h>
+#include <media/cec.h>
+#include <media/cec-notifier.h>
+
+enum {
+	REG_CSR = 0x00,
+	CSR_BUSY = BIT(7),
+	CSR_INT  = BIT(6),
+	CSR_ERR  = BIT(5),
+
+	REG_CER = 0x01,
+
+	REG_CVR = 0x02,
+
+	REG_CCR = 0x03,
+	CCR_RESET = BIT(7),
+	CCR_ON    = BIT(6),
+
+	REG_ACKH = 0x04,
+	REG_ACKL = 0x05,
+
+	REG_CCONR = 0x06,
+	CCONR_ENABLE_ERROR = BIT(4),
+	CCONR_RETRY_MASK = 7,
+
+	REG_CDR0 = 0x07,
+
+	CDR1_REQ = 0x00,
+	CDR1_CNF = 0x01,
+	CDR1_IND = 0x81,
+	CDR1_ERR = 0x82,
+	CDR1_IER = 0x83,
+
+	CDR2_CNF_SUCCESS    = 0x00,
+	CDR2_CNF_OFF_STATE  = 0x80,
+	CDR2_CNF_BAD_REQ    = 0x81,
+	CDR2_CNF_CEC_ACCESS = 0x82,
+	CDR2_CNF_ARB_ERROR  = 0x83,
+	CDR2_CNF_BAD_TIMING = 0x84,
+	CDR2_CNF_NACK_ADDR  = 0x85,
+	CDR2_CNF_NACK_DATA  = 0x86,
+};
+
+struct tda9950_priv {
+	struct i2c_client *client;
+	struct device *hdmi;
+	struct cec_adapter *adap;
+	struct tda9950_glue *glue;
+	u16 addresses;
+	struct cec_msg rx_msg;
+	struct cec_notifier *notify;
+	bool open;
+};
+
+static int tda9950_write_range(struct i2c_client *client, u8 addr, u8 *p, int cnt)
+{
+	struct i2c_msg msg;
+	u8 buf[CEC_MAX_MSG_SIZE + 3];
+	int ret;
+
+	if (WARN_ON(cnt > sizeof(buf) - 1))
+		return -EINVAL;
+
+	buf[0] = addr;
+	memcpy(buf + 1, p, cnt);
+
+	msg.addr = client->addr;
+	msg.flags = 0;
+	msg.len = cnt + 1;
+	msg.buf = buf;
+
+	dev_dbg(&client->dev, "wr 0x%02x: %*ph\n", addr, cnt, p);
+
+	ret = i2c_transfer(client->adapter, &msg, 1);
+	if (ret < 0)
+		dev_err(&client->dev, "Error %d writing to cec:0x%x\n", ret, addr);
+	return ret < 0 ? ret : 0;
+}
+
+static void tda9950_write(struct i2c_client *client, u8 addr, u8 val)
+{
+	tda9950_write_range(client, addr, &val, 1);
+}
+
+static int tda9950_read_range(struct i2c_client *client, u8 addr, u8 *p, int cnt)
+{
+	struct i2c_msg msg[2];
+	int ret;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = &addr;
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = cnt;
+	msg[1].buf = p;
+
+	ret = i2c_transfer(client->adapter, msg, 2);
+	if (ret < 0)
+		dev_err(&client->dev, "Error %d reading from cec:0x%x\n", ret, addr);
+
+	dev_dbg(&client->dev, "rd 0x%02x: %*ph\n", addr, cnt, p);
+
+	return ret;
+}
+
+static u8 tda9950_read(struct i2c_client *client, u8 addr)
+{
+	int ret;
+	u8 val;
+
+	ret = tda9950_read_range(client, addr, &val, 1);
+	if (ret < 0)
+		val = 0;
+
+	return val;
+}
+
+static irqreturn_t tda9950_irq(int irq, void *data)
+{
+	struct tda9950_priv *priv = data;
+	unsigned int tx_status;
+	u8 csr, cconr, buf[19];
+	u8 arb_lost_cnt, nack_cnt, err_cnt;
+
+	if (!priv->open)
+		return IRQ_NONE;
+
+	csr = tda9950_read(priv->client, REG_CSR);
+	if (!(csr & CSR_INT))
+		return IRQ_NONE;
+
+	cconr = tda9950_read(priv->client, REG_CCONR) & CCONR_RETRY_MASK;
+
+	tda9950_read_range(priv->client, REG_CDR0, buf, sizeof(buf));
+
+	/*
+	 * This should never happen: the data sheet says that there will
+	 * always be a valid message if the interrupt line is asserted.
+	 */
+	if (buf[0] == 0) {
+		dev_warn(&priv->client->dev, "interrupt pending, but no message?\n");
+		return IRQ_NONE;
+	}
+
+	switch (buf[1]) {
+	case CDR1_CNF: /* transmit result */
+		arb_lost_cnt = nack_cnt = err_cnt = 0;
+		switch (buf[2]) {
+		case CDR2_CNF_SUCCESS:
+			tx_status = CEC_TX_STATUS_OK;
+			break;
+
+		case CDR2_CNF_ARB_ERROR:
+			tx_status = CEC_TX_STATUS_ARB_LOST;
+			arb_lost_cnt = cconr;
+			break;
+
+		case CDR2_CNF_NACK_ADDR:
+			tx_status = CEC_TX_STATUS_NACK;
+			nack_cnt = cconr;
+			break;
+
+		default: /* some other error, refer to TDA9950 docs */
+			dev_err(&priv->client->dev, "CNF reply error 0x%02x\n",
+				buf[2]);
+			tx_status = CEC_TX_STATUS_ERROR;
+			err_cnt = cconr;
+			break;
+		}
+		/* TDA9950 executes all retries for us */
+		if (tx_status != CEC_TX_STATUS_OK)
+			tx_status |= CEC_TX_STATUS_MAX_RETRIES;
+		cec_transmit_done(priv->adap, tx_status, arb_lost_cnt,
+				  nack_cnt, 0, err_cnt);
+		break;
+
+	case CDR1_IND:
+		priv->rx_msg.len = buf[0] - 2;
+		if (priv->rx_msg.len > CEC_MAX_MSG_SIZE)
+			priv->rx_msg.len = CEC_MAX_MSG_SIZE;
+
+		memcpy(priv->rx_msg.msg, buf + 2, priv->rx_msg.len);
+		cec_received_msg(priv->adap, &priv->rx_msg);
+		break;
+
+	default: /* unknown */
+		dev_err(&priv->client->dev, "unknown service id 0x%02x\n",
+			buf[1]);
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int tda9950_cec_transmit(struct cec_adapter *adap, u8 attempts,
+				u32 signal_free_time, struct cec_msg *msg)
+{
+	struct tda9950_priv *priv = adap->priv;
+	u8 buf[CEC_MAX_MSG_SIZE + 2];
+
+	buf[0] = 2 + msg->len;
+	buf[1] = CDR1_REQ;
+	memcpy(buf + 2, msg->msg, msg->len);
+
+	if (attempts > 5)
+		attempts = 5;
+
+	tda9950_write(priv->client, REG_CCONR, attempts);
+
+	return tda9950_write_range(priv->client, REG_CDR0, buf, 2 + msg->len);
+}
+
+static int tda9950_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
+{
+	struct tda9950_priv *priv = adap->priv;
+	u16 addresses;
+	u8 buf[2];
+
+	if (addr == CEC_LOG_ADDR_INVALID)
+		addresses = priv->addresses = 0;
+	else
+		addresses = priv->addresses |= BIT(addr);
+
+	/* TDA9950 doesn't want address 15 set */
+	addresses &= 0x7fff;
+	buf[0] = addresses >> 8;
+	buf[1] = addresses;
+
+	return tda9950_write_range(priv->client, REG_ACKH, buf, 2);
+}
+
+/*
+ * When operating as part of the TDA998x, we need additional handling
+ * to initialise and shut down the TDA9950 part of the device.  These
+ * two hooks are provided to allow the TDA998x code to perform those
+ * activities.
+ */
+static int tda9950_glue_open(struct tda9950_priv *priv)
+{
+	int ret = 0;
+
+	if (priv->glue && priv->glue->open)
+		ret = priv->glue->open(priv->glue->data);
+
+	priv->open = true;
+
+	return ret;
+}
+
+static void tda9950_glue_release(struct tda9950_priv *priv)
+{
+	priv->open = false;
+
+	if (priv->glue && priv->glue->release)
+		priv->glue->release(priv->glue->data);
+}
+
+static int tda9950_open(struct tda9950_priv *priv)
+{
+	struct i2c_client *client = priv->client;
+	int ret;
+
+	ret = tda9950_glue_open(priv);
+	if (ret)
+		return ret;
+
+	/* Reset the TDA9950, and wait 250ms for it to recover */
+	tda9950_write(client, REG_CCR, CCR_RESET);
+	msleep(250);
+
+	tda9950_cec_adap_log_addr(priv->adap, CEC_LOG_ADDR_INVALID);
+
+	/* Start the command processor */
+	tda9950_write(client, REG_CCR, CCR_ON);
+
+	return 0;
+}
+
+static void tda9950_release(struct tda9950_priv *priv)
+{
+	struct i2c_client *client = priv->client;
+	int timeout = 50;
+	u8 csr;
+
+	/* Stop the command processor */
+	tda9950_write(client, REG_CCR, 0);
+
+	/* Wait up to .5s for it to signal non-busy */
+	do {
+		csr = tda9950_read(client, REG_CSR);
+		if (!(csr & CSR_BUSY) || !--timeout)
+			break;
+		msleep(10);
+	} while (1);
+
+	/* Warn the user that their IRQ may die if it's shared. */
+	if (csr & CSR_BUSY)
+		dev_warn(&client->dev, "command processor failed to stop, irq%d may die (csr=0x%02x)\n",
+			 client->irq, csr);
+
+	tda9950_glue_release(priv);
+}
+
+static int tda9950_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct tda9950_priv *priv = adap->priv;
+
+	if (!enable) {
+		tda9950_release(priv);
+		return 0;
+	} else {
+		return tda9950_open(priv);
+	}
+}
+
+static const struct cec_adap_ops tda9950_cec_ops = {
+	.adap_enable = tda9950_cec_adap_enable,
+	.adap_log_addr = tda9950_cec_adap_log_addr,
+	.adap_transmit = tda9950_cec_transmit,
+};
+
+/*
+ * When operating as part of the TDA998x, we need to claim additional
+ * resources.  These two hooks permit the management of those resources.
+ */
+static void tda9950_devm_glue_exit(void *data)
+{
+	struct tda9950_glue *glue = data;
+
+	if (glue && glue->exit)
+		glue->exit(glue->data);
+}
+
+static int tda9950_devm_glue_init(struct device *dev, struct tda9950_glue *glue)
+{
+	int ret;
+
+	if (glue && glue->init) {
+		ret = glue->init(glue->data);
+		if (ret)
+			return ret;
+	}
+
+	ret = devm_add_action(dev, tda9950_devm_glue_exit, glue);
+	if (ret)
+		tda9950_devm_glue_exit(glue);
+
+	return ret;
+}
+
+static void tda9950_cec_del(void *data)
+{
+	struct tda9950_priv *priv = data;
+
+	cec_delete_adapter(priv->adap);
+}
+
+static int tda9950_probe(struct i2c_client *client)
+{
+	struct tda9950_glue *glue = client->dev.platform_data;
+	struct device *dev = &client->dev;
+	struct tda9950_priv *priv;
+	unsigned long irqflags;
+	int ret;
+	u8 cvr;
+
+	/*
+	 * We must have I2C functionality: our multi-byte accesses
+	 * must be performed as a single contiguous transaction.
+	 */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev,
+			"adapter does not support I2C functionality\n");
+		return -ENXIO;
+	}
+
+	/* We must have an interrupt to be functional. */
+	if (client->irq <= 0) {
+		dev_err(&client->dev, "driver requires an interrupt\n");
+		return -ENXIO;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->client = client;
+	priv->glue = glue;
+
+	i2c_set_clientdata(client, priv);
+
+	/*
+	 * If we're part of a TDA998x, we want the class devices to be
+	 * associated with the HDMI Tx so we have a tight relationship
+	 * between the HDMI interface and the CEC interface.
+	 */
+	priv->hdmi = dev;
+	if (glue && glue->parent)
+		priv->hdmi = glue->parent;
+
+	priv->adap = cec_allocate_adapter(&tda9950_cec_ops, priv, "tda9950",
+					  CEC_CAP_DEFAULTS |
+					  CEC_CAP_CONNECTOR_INFO,
+					  CEC_MAX_LOG_ADDRS);
+	if (IS_ERR(priv->adap))
+		return PTR_ERR(priv->adap);
+
+	ret = devm_add_action(dev, tda9950_cec_del, priv);
+	if (ret) {
+		cec_delete_adapter(priv->adap);
+		return ret;
+	}
+
+	ret = tda9950_devm_glue_init(dev, glue);
+	if (ret)
+		return ret;
+
+	ret = tda9950_glue_open(priv);
+	if (ret)
+		return ret;
+
+	cvr = tda9950_read(client, REG_CVR);
+
+	dev_info(&client->dev,
+		 "TDA9950 CEC interface, hardware version %u.%u\n",
+		 cvr >> 4, cvr & 15);
+
+	tda9950_glue_release(priv);
+
+	irqflags = IRQF_TRIGGER_FALLING;
+	if (glue)
+		irqflags = glue->irq_flags;
+
+	ret = devm_request_threaded_irq(dev, client->irq, NULL, tda9950_irq,
+					irqflags | IRQF_SHARED | IRQF_ONESHOT,
+					dev_name(&client->dev), priv);
+	if (ret < 0)
+		return ret;
+
+	priv->notify = cec_notifier_cec_adap_register(priv->hdmi, NULL,
+						      priv->adap);
+	if (!priv->notify)
+		return -ENOMEM;
+
+	ret = cec_register_adapter(priv->adap, priv->hdmi);
+	if (ret < 0) {
+		cec_notifier_cec_adap_unregister(priv->notify, priv->adap);
+		return ret;
+	}
+
+	/*
+	 * CEC documentation says we must not call cec_delete_adapter
+	 * after a successful call to cec_register_adapter().
+	 */
+	devm_remove_action(dev, tda9950_cec_del, priv);
+
+	return 0;
+}
+
+static void tda9950_remove(struct i2c_client *client)
+{
+	struct tda9950_priv *priv = i2c_get_clientdata(client);
+
+	cec_notifier_cec_adap_unregister(priv->notify, priv->adap);
+	cec_unregister_adapter(priv->adap);
+}
+
+static struct i2c_device_id tda9950_ids[] = {
+	{ .name = "tda9950" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tda9950_ids);
+
+static struct i2c_driver tda9950_driver = {
+	.probe = tda9950_probe,
+	.remove = tda9950_remove,
+	.driver = {
+		.name = "tda9950",
+	},
+	.id_table = tda9950_ids,
+};
+
+module_i2c_driver(tda9950_driver);
+
+MODULE_AUTHOR("Russell King <rmk+kernel@armlinux.org.uk>");
+MODULE_DESCRIPTION("TDA9950/TDA998x Consumer Electronics Control Driver");
+MODULE_LICENSE("GPL v2");