Resguardo inicial

linux-7.2.3/drivers/media/cec/usb/Kconfig

@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# USB drivers
+
+if USB_SUPPORT && TTY
+source "drivers/media/cec/usb/extron-da-hd-4k-plus/Kconfig"
+source "drivers/media/cec/usb/pulse8/Kconfig"
+source "drivers/media/cec/usb/rainshadow/Kconfig"
+endif

linux-7.2.3/drivers/media/cec/usb/Makefile

@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the CEC USB device drivers.
+#
+obj-$(CONFIG_USB_EXTRON_DA_HD_4K_PLUS_CEC) += extron-da-hd-4k-plus/
+obj-$(CONFIG_USB_PULSE8_CEC) += pulse8/
+obj-$(CONFIG_USB_RAINSHADOW_CEC) += rainshadow/

linux-7.2.3/drivers/media/cec/usb/extron-da-hd-4k-plus/Kconfig

@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config USB_EXTRON_DA_HD_4K_PLUS_CEC
+	tristate "Extron DA HD 4K Plus CEC driver"
+	depends on VIDEO_DEV
+	depends on USB
+	depends on USB_ACM
+	select CEC_CORE
+	select SERIO
+	select SERIO_SERPORT
+	help
+	  This is a CEC driver for the Extron DA HD 4K Plus HDMI Splitter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called extron-da-hd-4k-plus-cec.

linux-7.2.3/drivers/media/cec/usb/extron-da-hd-4k-plus/Makefile

@@ -0,0 +1,2 @@
+extron-da-hd-4k-plus-cec-objs := extron-da-hd-4k-plus.o cec-splitter.o
+obj-$(CONFIG_USB_EXTRON_DA_HD_4K_PLUS_CEC) := extron-da-hd-4k-plus-cec.o

linux-7.2.3/drivers/media/cec/usb/extron-da-hd-4k-plus/cec-splitter.c

@@ -0,0 +1,657 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Copyright 2021-2024 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <media/cec.h>
+
+#include "cec-splitter.h"
+
+/*
+ * Helper function to reply to a received message with a Feature Abort
+ * message.
+ */
+static int cec_feature_abort_reason(struct cec_adapter *adap,
+				    struct cec_msg *msg, u8 reason)
+{
+	struct cec_msg tx_msg = { };
+
+	/*
+	 * Don't reply with CEC_MSG_FEATURE_ABORT to a CEC_MSG_FEATURE_ABORT
+	 * message!
+	 */
+	if (msg->msg[1] == CEC_MSG_FEATURE_ABORT)
+		return 0;
+	/* Don't Feature Abort messages from 'Unregistered' */
+	if (cec_msg_initiator(msg) == CEC_LOG_ADDR_UNREGISTERED)
+		return 0;
+	cec_msg_set_reply_to(&tx_msg, msg);
+	cec_msg_feature_abort(&tx_msg, msg->msg[1], reason);
+	return cec_transmit_msg(adap, &tx_msg, false);
+}
+
+/* Transmit an Active Source message from this output port to a sink */
+static void cec_port_out_active_source(struct cec_splitter_port *p)
+{
+	struct cec_adapter *adap = p->adap;
+	struct cec_msg msg;
+
+	if (!adap->is_configured)
+		return;
+	p->is_active_source = true;
+	cec_msg_init(&msg, adap->log_addrs.log_addr[0], 0);
+	cec_msg_active_source(&msg, adap->phys_addr);
+	cec_transmit_msg(adap, &msg, false);
+}
+
+/* Transmit Active Source messages from all output ports to the sinks */
+static void cec_out_active_source(struct cec_splitter *splitter)
+{
+	unsigned int i;
+
+	for (i = 0; i < splitter->num_out_ports; i++)
+		cec_port_out_active_source(splitter->ports[i]);
+}
+
+/* Transmit a Standby message from this output port to a sink */
+static void cec_port_out_standby(struct cec_splitter_port *p)
+{
+	struct cec_adapter *adap = p->adap;
+	struct cec_msg msg;
+
+	if (!adap->is_configured)
+		return;
+	cec_msg_init(&msg, adap->log_addrs.log_addr[0], 0);
+	cec_msg_standby(&msg);
+	cec_transmit_msg(adap, &msg, false);
+}
+
+/* Transmit Standby messages from all output ports to the sinks */
+static void cec_out_standby(struct cec_splitter *splitter)
+{
+	unsigned int i;
+
+	for (i = 0; i < splitter->num_out_ports; i++)
+		cec_port_out_standby(splitter->ports[i]);
+}
+
+/* Transmit an Image/Text View On message from this output port to a sink */
+static void cec_port_out_wakeup(struct cec_splitter_port *p, u8 opcode)
+{
+	struct cec_adapter *adap = p->adap;
+	u8 la = adap->log_addrs.log_addr[0];
+	struct cec_msg msg;
+
+	if (la == CEC_LOG_ADDR_INVALID)
+		la = CEC_LOG_ADDR_UNREGISTERED;
+	cec_msg_init(&msg, la, 0);
+	msg.len = 2;
+	msg.msg[1] = opcode;
+	cec_transmit_msg(adap, &msg, false);
+}
+
+/* Transmit Image/Text View On messages from all output ports to the sinks */
+static void cec_out_wakeup(struct cec_splitter *splitter, u8 opcode)
+{
+	unsigned int i;
+
+	for (i = 0; i < splitter->num_out_ports; i++)
+		cec_port_out_wakeup(splitter->ports[i], opcode);
+}
+
+/*
+ * Update the power state of the unconfigured CEC device to either
+ * Off or On depending on the current state of the splitter.
+ * This keeps the outputs in a consistent state.
+ */
+void cec_splitter_unconfigured_output(struct cec_splitter_port *p)
+{
+	p->video_latency = 1;
+	p->power_status = p->splitter->is_standby ?
+		CEC_OP_POWER_STATUS_TO_STANDBY : CEC_OP_POWER_STATUS_TO_ON;
+
+	/* The adapter was unconfigured, so clear the sequence and ts values */
+	p->out_give_device_power_status_seq = 0;
+	p->out_give_device_power_status_ts = ktime_set(0, 0);
+	p->out_request_current_latency_seq = 0;
+	p->out_request_current_latency_ts = ktime_set(0, 0);
+}
+
+/*
+ * Update the power state of the newly configured CEC device to either
+ * Off or On depending on the current state of the splitter.
+ * This keeps the outputs in a consistent state.
+ */
+void cec_splitter_configured_output(struct cec_splitter_port *p)
+{
+	p->video_latency = 1;
+	p->power_status = p->splitter->is_standby ?
+		CEC_OP_POWER_STATUS_TO_STANDBY : CEC_OP_POWER_STATUS_TO_ON;
+
+	if (p->splitter->is_standby) {
+		/*
+		 * Some sinks only obey Standby if it comes from the
+		 * active source.
+		 */
+		cec_port_out_active_source(p);
+		cec_port_out_standby(p);
+	} else {
+		cec_port_out_wakeup(p, CEC_MSG_IMAGE_VIEW_ON);
+	}
+}
+
+/* Pass the in_msg on to all output ports */
+static void cec_out_passthrough(struct cec_splitter *splitter,
+				const struct cec_msg *in_msg)
+{
+	unsigned int i;
+
+	for (i = 0; i < splitter->num_out_ports; i++) {
+		struct cec_splitter_port *p = splitter->ports[i];
+		struct cec_adapter *adap = p->adap;
+		struct cec_msg msg;
+
+		if (!adap->is_configured)
+			continue;
+		cec_msg_init(&msg, adap->log_addrs.log_addr[0], 0);
+		msg.len = in_msg->len;
+		memcpy(msg.msg + 1, in_msg->msg + 1, msg.len - 1);
+		cec_transmit_msg(adap, &msg, false);
+	}
+}
+
+/*
+ * See if all output ports received the Report Current Latency message,
+ * and if so, transmit the result from the input port to the video source.
+ */
+static void cec_out_report_current_latency(struct cec_splitter *splitter,
+					   struct cec_adapter *input_adap)
+{
+	struct cec_msg reply = {};
+	unsigned int reply_lat = 0;
+	unsigned int cnt = 0;
+	unsigned int i;
+
+	for (i = 0; i < splitter->num_out_ports; i++) {
+		struct cec_splitter_port *p = splitter->ports[i];
+		struct cec_adapter *adap = p->adap;
+
+		/* Skip unconfigured ports */
+		if (!adap->is_configured)
+			continue;
+		/* Return if a port is still waiting for a reply */
+		if (p->out_request_current_latency_seq)
+			return;
+		reply_lat += p->video_latency - 1;
+		cnt++;
+	}
+
+	/*
+	 * All ports that can reply, replied, so clear the sequence
+	 * and timestamp values.
+	 */
+	for (i = 0; i < splitter->num_out_ports; i++) {
+		struct cec_splitter_port *p = splitter->ports[i];
+
+		p->out_request_current_latency_seq = 0;
+		p->out_request_current_latency_ts = ktime_set(0, 0);
+	}
+
+	/*
+	 * Return if there were no replies or the input port is no longer
+	 * configured.
+	 */
+	if (!cnt || !input_adap->is_configured)
+		return;
+
+	/* Reply with the average latency */
+	reply_lat = 1 + reply_lat / cnt;
+	cec_msg_init(&reply, input_adap->log_addrs.log_addr[0],
+		     splitter->request_current_latency_dest);
+	cec_msg_report_current_latency(&reply, input_adap->phys_addr,
+				       reply_lat, 1, 1, 1);
+	cec_transmit_msg(input_adap, &reply, false);
+}
+
+/* Transmit Request Current Latency to all output ports */
+static int cec_out_request_current_latency(struct cec_splitter *splitter)
+{
+	ktime_t now = ktime_get();
+	bool error = true;
+	unsigned int i;
+
+	for (i = 0; i < splitter->num_out_ports; i++) {
+		struct cec_splitter_port *p = splitter->ports[i];
+		struct cec_adapter *adap = p->adap;
+
+		if (!adap->is_configured) {
+			/* Clear if not configured */
+			p->out_request_current_latency_seq = 0;
+			p->out_request_current_latency_ts = ktime_set(0, 0);
+		} else if (!p->out_request_current_latency_seq) {
+			/*
+			 * Keep the old ts if an earlier request is still
+			 * pending. This ensures that the request will
+			 * eventually time out based on the timestamp of
+			 * the first request if the sink is unresponsive.
+			 */
+			p->out_request_current_latency_ts = now;
+		}
+	}
+
+	for (i = 0; i < splitter->num_out_ports; i++) {
+		struct cec_splitter_port *p = splitter->ports[i];
+		struct cec_adapter *adap = p->adap;
+		struct cec_msg msg;
+
+		if (!adap->is_configured)
+			continue;
+		cec_msg_init(&msg, adap->log_addrs.log_addr[0], 0);
+		cec_msg_request_current_latency(&msg, true, adap->phys_addr);
+		if (cec_transmit_msg(adap, &msg, false))
+			continue;
+		p->out_request_current_latency_seq = msg.sequence | (1U << 31);
+		error = false;
+	}
+	return error ? -ENODEV : 0;
+}
+
+/*
+ * See if all output ports received the Report Power Status message,
+ * and if so, transmit the result from the input port to the video source.
+ */
+static void cec_out_report_power_status(struct cec_splitter *splitter,
+					struct cec_adapter *input_adap)
+{
+	struct cec_msg reply = {};
+	/* The target power status of the splitter itself */
+	u8 splitter_pwr = splitter->is_standby ?
+		CEC_OP_POWER_STATUS_STANDBY : CEC_OP_POWER_STATUS_ON;
+	/*
+	 * The transient power status of the splitter, used if not all
+	 * output report the target power status.
+	 */
+	u8 splitter_transient_pwr = splitter->is_standby ?
+		CEC_OP_POWER_STATUS_TO_STANDBY : CEC_OP_POWER_STATUS_TO_ON;
+	u8 reply_pwr = splitter_pwr;
+	unsigned int i;
+
+	for (i = 0; i < splitter->num_out_ports; i++) {
+		struct cec_splitter_port *p = splitter->ports[i];
+
+		/* Skip if no sink was found (HPD was low for more than 5s) */
+		if (!p->found_sink)
+			continue;
+
+		/* Return if a port is still waiting for a reply */
+		if (p->out_give_device_power_status_seq)
+			return;
+		if (p->power_status != splitter_pwr)
+			reply_pwr = splitter_transient_pwr;
+	}
+
+	/*
+	 * All ports that can reply, replied, so clear the sequence
+	 * and timestamp values.
+	 */
+	for (i = 0; i < splitter->num_out_ports; i++) {
+		struct cec_splitter_port *p = splitter->ports[i];
+
+		p->out_give_device_power_status_seq = 0;
+		p->out_give_device_power_status_ts = ktime_set(0, 0);
+	}
+
+	/* Return if the input port is no longer configured. */
+	if (!input_adap->is_configured)
+		return;
+
+	/* Reply with the new power status */
+	cec_msg_init(&reply, input_adap->log_addrs.log_addr[0],
+		     splitter->give_device_power_status_dest);
+	cec_msg_report_power_status(&reply, reply_pwr);
+	cec_transmit_msg(input_adap, &reply, false);
+}
+
+/* Transmit Give Device Power Status to all output ports */
+static int cec_out_give_device_power_status(struct cec_splitter *splitter)
+{
+	ktime_t now = ktime_get();
+	bool error = true;
+	unsigned int i;
+
+	for (i = 0; i < splitter->num_out_ports; i++) {
+		struct cec_splitter_port *p = splitter->ports[i];
+		struct cec_adapter *adap = p->adap;
+
+		/*
+		 * Keep the old ts if an earlier request is still
+		 * pending. This ensures that the request will
+		 * eventually time out based on the timestamp of
+		 * the first request if the sink is unresponsive.
+		 */
+		if (adap->is_configured && !p->out_give_device_power_status_seq)
+			p->out_give_device_power_status_ts = now;
+	}
+
+	for (i = 0; i < splitter->num_out_ports; i++) {
+		struct cec_splitter_port *p = splitter->ports[i];
+		struct cec_adapter *adap = p->adap;
+		struct cec_msg msg;
+
+		if (!adap->is_configured)
+			continue;
+
+		cec_msg_init(&msg, adap->log_addrs.log_addr[0], 0);
+		cec_msg_give_device_power_status(&msg, true);
+		if (cec_transmit_msg(adap, &msg, false))
+			continue;
+		p->out_give_device_power_status_seq = msg.sequence | (1U << 31);
+		error = false;
+	}
+	return error ? -ENODEV : 0;
+}
+
+/*
+ * CEC messages received on the HDMI input of the splitter are
+ * forwarded (if relevant) to the HDMI outputs of the splitter.
+ */
+int cec_splitter_received_input(struct cec_splitter_port *p, struct cec_msg *msg)
+{
+	if (!cec_msg_status_is_ok(msg))
+		return 0;
+
+	if (msg->len < 2)
+		return -ENOMSG;
+
+	switch (msg->msg[1]) {
+	case CEC_MSG_DEVICE_VENDOR_ID:
+	case CEC_MSG_REPORT_POWER_STATUS:
+	case CEC_MSG_SET_STREAM_PATH:
+	case CEC_MSG_ROUTING_CHANGE:
+	case CEC_MSG_REQUEST_ACTIVE_SOURCE:
+	case CEC_MSG_SYSTEM_AUDIO_MODE_STATUS:
+		return 0;
+
+	case CEC_MSG_STANDBY:
+		p->splitter->is_standby = true;
+		cec_out_standby(p->splitter);
+		return 0;
+
+	case CEC_MSG_IMAGE_VIEW_ON:
+	case CEC_MSG_TEXT_VIEW_ON:
+		p->splitter->is_standby = false;
+		cec_out_wakeup(p->splitter, msg->msg[1]);
+		return 0;
+
+	case CEC_MSG_ACTIVE_SOURCE:
+		cec_out_active_source(p->splitter);
+		return 0;
+
+	case CEC_MSG_SET_SYSTEM_AUDIO_MODE:
+		cec_out_passthrough(p->splitter, msg);
+		return 0;
+
+	case CEC_MSG_GIVE_DEVICE_POWER_STATUS:
+		p->splitter->give_device_power_status_dest =
+			cec_msg_initiator(msg);
+		if (cec_out_give_device_power_status(p->splitter))
+			cec_feature_abort_reason(p->adap, msg,
+						 CEC_OP_ABORT_INCORRECT_MODE);
+		return 0;
+
+	case CEC_MSG_REQUEST_CURRENT_LATENCY: {
+		u16 pa;
+
+		p->splitter->request_current_latency_dest =
+			cec_msg_initiator(msg);
+		cec_ops_request_current_latency(msg, &pa);
+		if (pa == p->adap->phys_addr &&
+		    cec_out_request_current_latency(p->splitter))
+			cec_feature_abort_reason(p->adap, msg,
+						 CEC_OP_ABORT_INCORRECT_MODE);
+		return 0;
+	}
+
+	default:
+		return -ENOMSG;
+	}
+	return -ENOMSG;
+}
+
+void cec_splitter_nb_transmit_canceled_output(struct cec_splitter_port *p,
+					      const struct cec_msg *msg,
+					      struct cec_adapter *input_adap)
+{
+	struct cec_splitter *splitter = p->splitter;
+	u32 seq = msg->sequence | (1U << 31);
+
+	/*
+	 * If this is the result of a failed non-blocking transmit, or it is
+	 * the result of the failed reply to a non-blocking transmit, then
+	 * check if the original transmit was to get the current power status
+	 * or latency and, if so, assume that the remove device is for one
+	 * reason or another unavailable and assume that it is in the same
+	 * power status as the splitter, or has no video latency.
+	 */
+	if ((cec_msg_recv_is_tx_result(msg) && !(msg->tx_status & CEC_TX_STATUS_OK)) ||
+	    (cec_msg_recv_is_rx_result(msg) && !(msg->rx_status & CEC_RX_STATUS_OK))) {
+		u8 tx_op = msg->msg[1];
+
+		if (msg->len < 2)
+			return;
+		if (cec_msg_recv_is_rx_result(msg) &&
+		    (msg->rx_status & CEC_RX_STATUS_FEATURE_ABORT))
+			tx_op = msg->msg[2];
+		switch (tx_op) {
+		case CEC_MSG_GIVE_DEVICE_POWER_STATUS:
+			if (p->out_give_device_power_status_seq != seq)
+				break;
+			p->out_give_device_power_status_seq = 0;
+			p->out_give_device_power_status_ts = ktime_set(0, 0);
+			p->power_status = splitter->is_standby ?
+					  CEC_OP_POWER_STATUS_STANDBY :
+					  CEC_OP_POWER_STATUS_ON;
+			cec_out_report_power_status(splitter, input_adap);
+			break;
+		case CEC_MSG_REQUEST_CURRENT_LATENCY:
+			if (p->out_request_current_latency_seq != seq)
+				break;
+			p->video_latency = 1;
+			p->out_request_current_latency_seq = 0;
+			p->out_request_current_latency_ts = ktime_set(0, 0);
+			cec_out_report_current_latency(splitter, input_adap);
+			break;
+		}
+		return;
+	}
+
+	if (cec_msg_recv_is_tx_result(msg)) {
+		if (p->out_request_current_latency_seq != seq)
+			return;
+		p->out_request_current_latency_ts = ns_to_ktime(msg->tx_ts);
+		return;
+	}
+}
+
+/*
+ * CEC messages received on an HDMI output of the splitter
+ * are processed here.
+ */
+int cec_splitter_received_output(struct cec_splitter_port *p, struct cec_msg *msg,
+				 struct cec_adapter *input_adap)
+{
+	struct cec_adapter *adap = p->adap;
+	struct cec_splitter *splitter = p->splitter;
+	u32 seq = msg->sequence | (1U << 31);
+	struct cec_msg reply = {};
+	u16 pa;
+
+	if (!adap->is_configured || msg->len < 2)
+		return -ENOMSG;
+
+	switch (msg->msg[1]) {
+	case CEC_MSG_REPORT_POWER_STATUS: {
+		u8 pwr;
+
+		cec_ops_report_power_status(msg, &pwr);
+		if (pwr > CEC_OP_POWER_STATUS_TO_STANDBY)
+			pwr = splitter->is_standby ?
+				CEC_OP_POWER_STATUS_TO_STANDBY :
+				CEC_OP_POWER_STATUS_TO_ON;
+		p->power_status = pwr;
+		if (p->out_give_device_power_status_seq == seq) {
+			p->out_give_device_power_status_seq = 0;
+			p->out_give_device_power_status_ts = ktime_set(0, 0);
+		}
+		cec_out_report_power_status(splitter, input_adap);
+		return 0;
+	}
+
+	case CEC_MSG_REPORT_CURRENT_LATENCY: {
+		u8 video_lat;
+		u8 low_lat_mode;
+		u8 audio_out_comp;
+		u8 audio_out_delay;
+
+		cec_ops_report_current_latency(msg, &pa,
+					       &video_lat, &low_lat_mode,
+					       &audio_out_comp, &audio_out_delay);
+		if (!video_lat || video_lat >= 252)
+			video_lat = 1;
+		p->video_latency = video_lat;
+		if (p->out_request_current_latency_seq == seq) {
+			p->out_request_current_latency_seq = 0;
+			p->out_request_current_latency_ts = ktime_set(0, 0);
+		}
+		cec_out_report_current_latency(splitter, input_adap);
+		return 0;
+	}
+
+	case CEC_MSG_STANDBY:
+	case CEC_MSG_ROUTING_CHANGE:
+	case CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS:
+		return 0;
+
+	case CEC_MSG_ACTIVE_SOURCE:
+		cec_ops_active_source(msg, &pa);
+		if (pa == 0)
+			p->is_active_source = false;
+		return 0;
+
+	case CEC_MSG_REQUEST_ACTIVE_SOURCE:
+		if (!p->is_active_source)
+			return 0;
+		cec_msg_set_reply_to(&reply, msg);
+		cec_msg_active_source(&reply, adap->phys_addr);
+		cec_transmit_msg(adap, &reply, false);
+		return 0;
+
+	case CEC_MSG_GIVE_DEVICE_POWER_STATUS:
+		cec_msg_set_reply_to(&reply, msg);
+		cec_msg_report_power_status(&reply, splitter->is_standby ?
+					    CEC_OP_POWER_STATUS_STANDBY :
+					    CEC_OP_POWER_STATUS_ON);
+		cec_transmit_msg(adap, &reply, false);
+		return 0;
+
+	case CEC_MSG_SET_STREAM_PATH:
+		cec_ops_set_stream_path(msg, &pa);
+		if (pa == adap->phys_addr) {
+			cec_msg_set_reply_to(&reply, msg);
+			cec_msg_active_source(&reply, pa);
+			cec_transmit_msg(adap, &reply, false);
+		}
+		return 0;
+
+	default:
+		return -ENOMSG;
+	}
+	return -ENOMSG;
+}
+
+/*
+ * Called every second to check for timed out messages and whether there
+ * still is a video sink connected or not.
+ *
+ * Returns true if sinks were lost.
+ */
+bool cec_splitter_poll(struct cec_splitter *splitter,
+		       struct cec_adapter *input_adap, bool debug)
+{
+	ktime_t now = ktime_get();
+	u8 pwr = splitter->is_standby ?
+		 CEC_OP_POWER_STATUS_STANDBY : CEC_OP_POWER_STATUS_ON;
+	unsigned int max_delay_ms = input_adap->xfer_timeout_ms + 2000;
+	unsigned int i;
+	bool res = false;
+
+	for (i = 0; i < splitter->num_out_ports; i++) {
+		struct cec_splitter_port *p = splitter->ports[i];
+		s64 pwr_delta, lat_delta;
+		bool pwr_timeout, lat_timeout;
+
+		if (!p)
+			continue;
+
+		pwr_delta = ktime_ms_delta(now, p->out_give_device_power_status_ts);
+		pwr_timeout = p->out_give_device_power_status_seq &&
+			      pwr_delta >= max_delay_ms;
+		lat_delta = ktime_ms_delta(now, p->out_request_current_latency_ts);
+		lat_timeout = p->out_request_current_latency_seq &&
+			      lat_delta >= max_delay_ms;
+
+		/*
+		 * If the HPD is low for more than 5 seconds, then assume no display
+		 * is connected.
+		 */
+		if (p->found_sink && ktime_to_ns(p->lost_sink_ts) &&
+		    ktime_ms_delta(now, p->lost_sink_ts) > 5000) {
+			if (debug)
+				dev_info(splitter->dev,
+					 "port %u: HPD low for more than 5s, assume no sink is connected.\n",
+					 p->port);
+			p->found_sink = false;
+			p->lost_sink_ts = ktime_set(0, 0);
+			res = true;
+		}
+
+		/*
+		 * If the power status request timed out, then set the port's
+		 * power status to that of the splitter, ensuring a consistent
+		 * power state.
+		 */
+		if (pwr_timeout) {
+			mutex_lock(&p->adap->lock);
+			if (debug)
+				dev_info(splitter->dev,
+					 "port %u: give up on power status for seq %u\n",
+					 p->port,
+					 p->out_give_device_power_status_seq & ~(1 << 31));
+			p->power_status = pwr;
+			p->out_give_device_power_status_seq = 0;
+			p->out_give_device_power_status_ts = ktime_set(0, 0);
+			mutex_unlock(&p->adap->lock);
+			cec_out_report_power_status(splitter, input_adap);
+		}
+
+		/*
+		 * If the current latency request timed out, then set the port's
+		 * latency to 1.
+		 */
+		if (lat_timeout) {
+			mutex_lock(&p->adap->lock);
+			if (debug)
+				dev_info(splitter->dev,
+					 "port %u: give up on latency for seq %u\n",
+					 p->port,
+					 p->out_request_current_latency_seq & ~(1 << 31));
+			p->video_latency = 1;
+			p->out_request_current_latency_seq = 0;
+			p->out_request_current_latency_ts = ktime_set(0, 0);
+			mutex_unlock(&p->adap->lock);
+			cec_out_report_current_latency(splitter, input_adap);
+		}
+	}
+	return res;
+}

linux-7.2.3/drivers/media/cec/usb/extron-da-hd-4k-plus/cec-splitter.h

@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * Copyright 2021-2024 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _CEC_SPLITTER_H_
+#define _CEC_SPLITTER_H_
+
+struct cec_splitter;
+
+#define STATE_CHANGE_MAX_REPEATS 2
+
+struct cec_splitter_port {
+	struct cec_splitter *splitter;
+	struct cec_adapter *adap;
+	unsigned int port;
+	bool is_active_source;
+	bool found_sink;
+	ktime_t lost_sink_ts;
+	u32 out_request_current_latency_seq;
+	ktime_t out_request_current_latency_ts;
+	u8 video_latency;
+	u32 out_give_device_power_status_seq;
+	ktime_t out_give_device_power_status_ts;
+	u8 power_status;
+};
+
+struct cec_splitter {
+	struct device *dev;
+	unsigned int num_out_ports;
+	struct cec_splitter_port **ports;
+
+	/* High-level splitter state */
+	u8 request_current_latency_dest;
+	u8 give_device_power_status_dest;
+	bool is_standby;
+};
+
+void cec_splitter_unconfigured_output(struct cec_splitter_port *port);
+void cec_splitter_configured_output(struct cec_splitter_port *port);
+int cec_splitter_received_input(struct cec_splitter_port *port, struct cec_msg *msg);
+int cec_splitter_received_output(struct cec_splitter_port *port, struct cec_msg *msg,
+				 struct cec_adapter *input_adap);
+void cec_splitter_nb_transmit_canceled_output(struct cec_splitter_port *port,
+					      const struct cec_msg *msg,
+					      struct cec_adapter *input_adap);
+bool cec_splitter_poll(struct cec_splitter *splitter,
+		       struct cec_adapter *input_adap, bool debug);
+
+#endif

linux-7.2.3/drivers/media/cec/usb/extron-da-hd-4k-plus/extron-da-hd-4k-plus.h

@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * Copyright 2021-2024 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _EXTRON_DA_HD_4K_PLUS_H_
+#define _EXTRON_DA_HD_4K_PLUS_H_
+
+#include <linux/kthread.h>
+#include <linux/serio.h>
+#include <linux/workqueue.h>
+#include <media/cec.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-dv-timings.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ioctl.h>
+
+#include "cec-splitter.h"
+
+#define DATA_SIZE 256
+
+#define PING_PERIOD	(15 * HZ)
+
+#define NUM_MSGS CEC_MAX_MSG_RX_QUEUE_SZ
+
+#define MAX_PORTS (1 + 6)
+
+#define MAX_EDID_BLOCKS 2
+
+struct extron;
+
+struct extron_port {
+	struct cec_splitter_port port;
+	struct device *dev;
+	struct cec_adapter *adap;
+	struct video_device vdev;
+	struct v4l2_ctrl_handler hdl;
+	struct v4l2_ctrl *ctrl_rx_power_present;
+	struct v4l2_ctrl *ctrl_tx_hotplug;
+	struct v4l2_ctrl *ctrl_tx_edid_present;
+	bool is_input;
+	char direction;
+	char name[26];
+	unsigned char edid[MAX_EDID_BLOCKS * 128];
+	unsigned char edid_tmp[MAX_EDID_BLOCKS * 128];
+	unsigned int edid_blocks;
+	bool read_edid;
+	struct extron *extron;
+	struct work_struct irq_work;
+	struct completion cmd_done;
+	const char *response;
+	unsigned int cmd_error;
+	struct cec_msg rx_msg[NUM_MSGS];
+	unsigned int rx_msg_cur_idx, rx_msg_num;
+	/* protect rx_msg_cur_idx and rx_msg_num */
+	spinlock_t msg_lock;
+	u32 tx_done_status;
+	bool update_phys_addr;
+	u16 phys_addr;
+	bool cec_was_registered;
+	bool disconnected;
+	bool update_has_signal;
+	bool has_signal;
+	bool update_has_edid;
+	bool has_edid;
+	bool has_4kp30;
+	bool has_4kp60;
+	bool has_qy;
+	bool has_qs;
+	u8 est_i, est_ii;
+
+	/* locks access to the video_device */
+	struct mutex video_lock;
+};
+
+struct extron {
+	struct cec_splitter splitter;
+	struct device *dev;
+	struct serio *serio;
+	/* locks access to serio */
+	struct mutex serio_lock;
+	unsigned int num_ports;
+	unsigned int num_in_ports;
+	unsigned int num_out_ports;
+	char unit_name[32];
+	char unit_type[64];
+	char unit_fw_version[32];
+	char unit_cec_engine_version[32];
+	struct extron_port *ports[MAX_PORTS];
+	struct cec_splitter_port *splitter_ports[MAX_PORTS];
+	struct v4l2_device v4l2_dev;
+	bool hpd_never_low;
+	struct task_struct *kthread_setup;
+	struct delayed_work work_update_edid;
+
+	/* serializes EDID reading */
+	struct mutex edid_lock;
+	unsigned int edid_bytes_read;
+	struct extron_port *edid_port;
+	struct completion edid_completion;
+	bool edid_reading;
+	bool is_ready;
+
+	struct completion cmd_done;
+	const char *response;
+	unsigned int cmd_error;
+	char data[DATA_SIZE];
+	unsigned int len;
+	char reply[DATA_SIZE];
+	char buf[DATA_SIZE];
+	unsigned int idx;
+};
+
+#endif

linux-7.2.3/drivers/media/cec/usb/pulse8/Kconfig

@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config USB_PULSE8_CEC
+	tristate "Pulse Eight HDMI CEC"
+	select CEC_CORE
+	select USB
+	select USB_ACM
+	select SERIO
+	select SERIO_SERPORT
+	help
+	  This is a cec driver for the Pulse Eight HDMI CEC device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pulse8-cec.

linux-7.2.3/drivers/media/cec/usb/pulse8/Makefile

@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_USB_PULSE8_CEC) += pulse8-cec.o

linux-7.2.3/drivers/media/cec/usb/pulse8/pulse8-cec.c

@@ -0,0 +1,931 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Pulse Eight HDMI CEC driver
+ *
+ * Copyright 2016 Hans Verkuil <hverkuil@kernel.org>
+ */
+
+/*
+ * Notes:
+ *
+ * - Devices with firmware version < 2 do not store their configuration in
+ *   EEPROM.
+ *
+ * - In autonomous mode, only messages from a TV will be acknowledged, even
+ *   polling messages. Upon receiving a message from a TV, the dongle will
+ *   respond to messages from any logical address.
+ *
+ * - In autonomous mode, the dongle will by default reply Feature Abort
+ *   [Unrecognized Opcode] when it receives Give Device Vendor ID. It will
+ *   however observe vendor ID's reported by other devices and possibly
+ *   alter this behavior. When TV's (and TV's only) report that their vendor ID
+ *   is LG (0x00e091), the dongle will itself reply that it has the same vendor
+ *   ID, and it will respond to at least one vendor specific command.
+ *
+ * - In autonomous mode, the dongle is known to attempt wakeup if it receives
+ *   <User Control Pressed> ["Power On"], ["Power] or ["Power Toggle"], or if it
+ *   receives <Set Stream Path> with its own physical address. It also does this
+ *   if it receives <Vendor Specific Command> [0x03 0x00] from an LG TV.
+ */
+
+#include <linux/completion.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+
+#include <media/cec.h>
+
+MODULE_AUTHOR("Hans Verkuil <hverkuil@kernel.org>");
+MODULE_DESCRIPTION("Pulse Eight HDMI CEC driver");
+MODULE_LICENSE("GPL");
+
+static int debug;
+static int persistent_config;
+module_param(debug, int, 0644);
+module_param(persistent_config, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-2)");
+MODULE_PARM_DESC(persistent_config, "read config from persistent memory (0-1)");
+
+enum pulse8_msgcodes {
+	MSGCODE_NOTHING = 0,
+	MSGCODE_PING,
+	MSGCODE_TIMEOUT_ERROR,
+	MSGCODE_HIGH_ERROR,
+	MSGCODE_LOW_ERROR,
+	MSGCODE_FRAME_START,
+	MSGCODE_FRAME_DATA,
+	MSGCODE_RECEIVE_FAILED,
+	MSGCODE_COMMAND_ACCEPTED,	/* 0x08 */
+	MSGCODE_COMMAND_REJECTED,
+	MSGCODE_SET_ACK_MASK,
+	MSGCODE_TRANSMIT,
+	MSGCODE_TRANSMIT_EOM,
+	MSGCODE_TRANSMIT_IDLETIME,
+	MSGCODE_TRANSMIT_ACK_POLARITY,
+	MSGCODE_TRANSMIT_LINE_TIMEOUT,
+	MSGCODE_TRANSMIT_SUCCEEDED,	/* 0x10 */
+	MSGCODE_TRANSMIT_FAILED_LINE,
+	MSGCODE_TRANSMIT_FAILED_ACK,
+	MSGCODE_TRANSMIT_FAILED_TIMEOUT_DATA,
+	MSGCODE_TRANSMIT_FAILED_TIMEOUT_LINE,
+	MSGCODE_FIRMWARE_VERSION,
+	MSGCODE_START_BOOTLOADER,
+	MSGCODE_GET_BUILDDATE,
+	MSGCODE_SET_CONTROLLED,		/* 0x18 */
+	MSGCODE_GET_AUTO_ENABLED,
+	MSGCODE_SET_AUTO_ENABLED,
+	MSGCODE_GET_DEFAULT_LOGICAL_ADDRESS,
+	MSGCODE_SET_DEFAULT_LOGICAL_ADDRESS,
+	MSGCODE_GET_LOGICAL_ADDRESS_MASK,
+	MSGCODE_SET_LOGICAL_ADDRESS_MASK,
+	MSGCODE_GET_PHYSICAL_ADDRESS,
+	MSGCODE_SET_PHYSICAL_ADDRESS,	/* 0x20 */
+	MSGCODE_GET_DEVICE_TYPE,
+	MSGCODE_SET_DEVICE_TYPE,
+	MSGCODE_GET_HDMI_VERSION,	/* Removed in FW >= 10 */
+	MSGCODE_SET_HDMI_VERSION,
+	MSGCODE_GET_OSD_NAME,
+	MSGCODE_SET_OSD_NAME,
+	MSGCODE_WRITE_EEPROM,
+	MSGCODE_GET_ADAPTER_TYPE,	/* 0x28 */
+	MSGCODE_SET_ACTIVE_SOURCE,
+	MSGCODE_GET_AUTO_POWER_ON,	/* New for FW >= 10 */
+	MSGCODE_SET_AUTO_POWER_ON,
+
+	MSGCODE_FRAME_EOM = 0x80,
+	MSGCODE_FRAME_ACK = 0x40,
+};
+
+static const char * const pulse8_msgnames[] = {
+	"NOTHING",
+	"PING",
+	"TIMEOUT_ERROR",
+	"HIGH_ERROR",
+	"LOW_ERROR",
+	"FRAME_START",
+	"FRAME_DATA",
+	"RECEIVE_FAILED",
+	"COMMAND_ACCEPTED",
+	"COMMAND_REJECTED",
+	"SET_ACK_MASK",
+	"TRANSMIT",
+	"TRANSMIT_EOM",
+	"TRANSMIT_IDLETIME",
+	"TRANSMIT_ACK_POLARITY",
+	"TRANSMIT_LINE_TIMEOUT",
+	"TRANSMIT_SUCCEEDED",
+	"TRANSMIT_FAILED_LINE",
+	"TRANSMIT_FAILED_ACK",
+	"TRANSMIT_FAILED_TIMEOUT_DATA",
+	"TRANSMIT_FAILED_TIMEOUT_LINE",
+	"FIRMWARE_VERSION",
+	"START_BOOTLOADER",
+	"GET_BUILDDATE",
+	"SET_CONTROLLED",
+	"GET_AUTO_ENABLED",
+	"SET_AUTO_ENABLED",
+	"GET_DEFAULT_LOGICAL_ADDRESS",
+	"SET_DEFAULT_LOGICAL_ADDRESS",
+	"GET_LOGICAL_ADDRESS_MASK",
+	"SET_LOGICAL_ADDRESS_MASK",
+	"GET_PHYSICAL_ADDRESS",
+	"SET_PHYSICAL_ADDRESS",
+	"GET_DEVICE_TYPE",
+	"SET_DEVICE_TYPE",
+	"GET_HDMI_VERSION",
+	"SET_HDMI_VERSION",
+	"GET_OSD_NAME",
+	"SET_OSD_NAME",
+	"WRITE_EEPROM",
+	"GET_ADAPTER_TYPE",
+	"SET_ACTIVE_SOURCE",
+	"GET_AUTO_POWER_ON",
+	"SET_AUTO_POWER_ON",
+};
+
+static const char *pulse8_msgname(u8 cmd)
+{
+	static char unknown_msg[5];
+
+	if ((cmd & 0x3f) < ARRAY_SIZE(pulse8_msgnames))
+		return pulse8_msgnames[cmd & 0x3f];
+	snprintf(unknown_msg, sizeof(unknown_msg), "0x%02x", cmd);
+	return unknown_msg;
+}
+
+#define MSGSTART	0xff
+#define MSGEND		0xfe
+#define MSGESC		0xfd
+#define MSGOFFSET	3
+
+#define DATA_SIZE 256
+
+#define PING_PERIOD	(15 * HZ)
+
+#define NUM_MSGS 8
+
+struct pulse8 {
+	struct device *dev;
+	struct serio *serio;
+	struct cec_adapter *adap;
+	unsigned int vers;
+
+	struct delayed_work ping_eeprom_work;
+
+	struct work_struct irq_work;
+	struct cec_msg rx_msg[NUM_MSGS];
+	unsigned int rx_msg_cur_idx, rx_msg_num;
+	/* protect rx_msg_cur_idx and rx_msg_num */
+	spinlock_t msg_lock;
+	u8 new_rx_msg[CEC_MAX_MSG_SIZE];
+	u8 new_rx_msg_len;
+
+	struct work_struct tx_work;
+	u32 tx_done_status;
+	u32 tx_signal_free_time;
+	struct cec_msg tx_msg;
+	bool tx_msg_is_bcast;
+
+	struct completion cmd_done;
+	u8 data[DATA_SIZE];
+	unsigned int len;
+	u8 buf[DATA_SIZE];
+	unsigned int idx;
+	bool escape;
+	bool started;
+
+	/* locks access to the adapter */
+	struct mutex lock;
+	bool config_pending;
+	bool restoring_config;
+	bool autonomous;
+};
+
+static int pulse8_send(struct serio *serio, const u8 *command, u8 cmd_len)
+{
+	int err = 0;
+
+	err = serio_write(serio, MSGSTART);
+	if (err)
+		return err;
+	for (; !err && cmd_len; command++, cmd_len--) {
+		if (*command >= MSGESC) {
+			err = serio_write(serio, MSGESC);
+			if (!err)
+				err = serio_write(serio, *command - MSGOFFSET);
+		} else {
+			err = serio_write(serio, *command);
+		}
+	}
+	if (!err)
+		err = serio_write(serio, MSGEND);
+
+	return err;
+}
+
+static int pulse8_send_and_wait_once(struct pulse8 *pulse8,
+				     const u8 *cmd, u8 cmd_len,
+				     u8 response, u8 size)
+{
+	int err;
+
+	if (!pulse8->serio)
+		return -ENODEV;
+
+	if (debug > 1)
+		dev_info(pulse8->dev, "transmit %s: %*ph\n",
+			 pulse8_msgname(cmd[0]), cmd_len, cmd);
+	init_completion(&pulse8->cmd_done);
+
+	err = pulse8_send(pulse8->serio, cmd, cmd_len);
+	if (err)
+		return err;
+
+	if (!wait_for_completion_timeout(&pulse8->cmd_done, HZ))
+		return -ETIMEDOUT;
+	if ((pulse8->data[0] & 0x3f) == MSGCODE_COMMAND_REJECTED &&
+	    cmd[0] != MSGCODE_SET_CONTROLLED &&
+	    cmd[0] != MSGCODE_SET_AUTO_ENABLED &&
+	    cmd[0] != MSGCODE_GET_BUILDDATE)
+		return -ENOTTY;
+	if (response &&
+	    ((pulse8->data[0] & 0x3f) != response || pulse8->len < size + 1)) {
+		dev_info(pulse8->dev, "transmit %s failed with %s\n",
+			 pulse8_msgname(cmd[0]),
+			 pulse8_msgname(pulse8->data[0]));
+		return -EIO;
+	}
+	return 0;
+}
+
+static int pulse8_send_and_wait(struct pulse8 *pulse8,
+				const u8 *cmd, u8 cmd_len, u8 response, u8 size)
+{
+	u8 cmd_sc[2];
+	int err;
+
+	err = pulse8_send_and_wait_once(pulse8, cmd, cmd_len, response, size);
+	if (err != -ENOTTY)
+		return err;
+
+	cmd_sc[0] = MSGCODE_SET_CONTROLLED;
+	cmd_sc[1] = 1;
+	err = pulse8_send_and_wait_once(pulse8, cmd_sc, 2,
+					MSGCODE_COMMAND_ACCEPTED, 1);
+	if (!err)
+		err = pulse8_send_and_wait_once(pulse8, cmd, cmd_len,
+						response, size);
+	return err == -ENOTTY ? -EIO : err;
+}
+
+static void pulse8_tx_work_handler(struct work_struct *work)
+{
+	struct pulse8 *pulse8 = container_of(work, struct pulse8, tx_work);
+	struct cec_msg *msg = &pulse8->tx_msg;
+	unsigned int i;
+	u8 cmd[2];
+	int err;
+
+	if (msg->len == 0)
+		return;
+
+	mutex_lock(&pulse8->lock);
+	cmd[0] = MSGCODE_TRANSMIT_IDLETIME;
+	cmd[1] = pulse8->tx_signal_free_time;
+	err = pulse8_send_and_wait(pulse8, cmd, 2,
+				   MSGCODE_COMMAND_ACCEPTED, 1);
+	cmd[0] = MSGCODE_TRANSMIT_ACK_POLARITY;
+	cmd[1] = cec_msg_is_broadcast(msg);
+	pulse8->tx_msg_is_bcast = cec_msg_is_broadcast(msg);
+	if (!err)
+		err = pulse8_send_and_wait(pulse8, cmd, 2,
+					   MSGCODE_COMMAND_ACCEPTED, 1);
+	cmd[0] = msg->len == 1 ? MSGCODE_TRANSMIT_EOM : MSGCODE_TRANSMIT;
+	cmd[1] = msg->msg[0];
+	if (!err)
+		err = pulse8_send_and_wait(pulse8, cmd, 2,
+					   MSGCODE_COMMAND_ACCEPTED, 1);
+	if (!err && msg->len > 1) {
+		for (i = 1; !err && i < msg->len; i++) {
+			cmd[0] = ((i == msg->len - 1)) ?
+				MSGCODE_TRANSMIT_EOM : MSGCODE_TRANSMIT;
+			cmd[1] = msg->msg[i];
+			err = pulse8_send_and_wait(pulse8, cmd, 2,
+						   MSGCODE_COMMAND_ACCEPTED, 1);
+		}
+	}
+	if (err && debug)
+		dev_info(pulse8->dev, "%s(0x%02x) failed with error %d for msg %*ph\n",
+			 pulse8_msgname(cmd[0]), cmd[1],
+			 err, msg->len, msg->msg);
+	msg->len = 0;
+	mutex_unlock(&pulse8->lock);
+	if (err)
+		cec_transmit_attempt_done(pulse8->adap, CEC_TX_STATUS_ERROR);
+}
+
+static void pulse8_irq_work_handler(struct work_struct *work)
+{
+	struct pulse8 *pulse8 =
+		container_of(work, struct pulse8, irq_work);
+	unsigned long flags;
+	u32 status;
+
+	spin_lock_irqsave(&pulse8->msg_lock, flags);
+	while (pulse8->rx_msg_num) {
+		spin_unlock_irqrestore(&pulse8->msg_lock, flags);
+		if (debug)
+			dev_info(pulse8->dev, "adap received %*ph\n",
+				 pulse8->rx_msg[pulse8->rx_msg_cur_idx].len,
+				 pulse8->rx_msg[pulse8->rx_msg_cur_idx].msg);
+		cec_received_msg(pulse8->adap,
+				 &pulse8->rx_msg[pulse8->rx_msg_cur_idx]);
+		spin_lock_irqsave(&pulse8->msg_lock, flags);
+		if (pulse8->rx_msg_num)
+			pulse8->rx_msg_num--;
+		pulse8->rx_msg_cur_idx =
+			(pulse8->rx_msg_cur_idx + 1) % NUM_MSGS;
+	}
+	spin_unlock_irqrestore(&pulse8->msg_lock, flags);
+
+	mutex_lock(&pulse8->lock);
+	status = pulse8->tx_done_status;
+	pulse8->tx_done_status = 0;
+	mutex_unlock(&pulse8->lock);
+	if (status)
+		cec_transmit_attempt_done(pulse8->adap, status);
+}
+
+static irqreturn_t pulse8_interrupt(struct serio *serio, unsigned char data,
+				    unsigned int flags)
+{
+	struct pulse8 *pulse8 = serio_get_drvdata(serio);
+	unsigned long irq_flags;
+	unsigned int idx;
+
+	if (!pulse8->started && data != MSGSTART)
+		return IRQ_HANDLED;
+	if (data == MSGESC) {
+		pulse8->escape = true;
+		return IRQ_HANDLED;
+	}
+	if (pulse8->escape) {
+		data += MSGOFFSET;
+		pulse8->escape = false;
+	} else if (data == MSGEND) {
+		u8 msgcode = pulse8->buf[0];
+
+		if (debug > 1)
+			dev_info(pulse8->dev, "received %s: %*ph\n",
+				 pulse8_msgname(msgcode),
+				 pulse8->idx, pulse8->buf);
+		switch (msgcode & 0x3f) {
+		case MSGCODE_FRAME_START:
+			/*
+			 * Test if we are receiving a new msg when a previous
+			 * message is still pending.
+			 */
+			if (!(msgcode & MSGCODE_FRAME_EOM)) {
+				pulse8->new_rx_msg_len = 1;
+				pulse8->new_rx_msg[0] = pulse8->buf[1];
+				break;
+			}
+			fallthrough;
+		case MSGCODE_FRAME_DATA:
+			if (pulse8->new_rx_msg_len < CEC_MAX_MSG_SIZE)
+				pulse8->new_rx_msg[pulse8->new_rx_msg_len++] =
+					pulse8->buf[1];
+			if (!(msgcode & MSGCODE_FRAME_EOM))
+				break;
+
+			spin_lock_irqsave(&pulse8->msg_lock, irq_flags);
+			idx = (pulse8->rx_msg_cur_idx + pulse8->rx_msg_num) %
+				NUM_MSGS;
+			if (pulse8->rx_msg_num == NUM_MSGS) {
+				dev_warn(pulse8->dev,
+					 "message queue is full, dropping %*ph\n",
+					 pulse8->new_rx_msg_len,
+					 pulse8->new_rx_msg);
+				spin_unlock_irqrestore(&pulse8->msg_lock,
+						       irq_flags);
+				pulse8->new_rx_msg_len = 0;
+				break;
+			}
+			pulse8->rx_msg_num++;
+			memcpy(pulse8->rx_msg[idx].msg, pulse8->new_rx_msg,
+			       pulse8->new_rx_msg_len);
+			pulse8->rx_msg[idx].len = pulse8->new_rx_msg_len;
+			spin_unlock_irqrestore(&pulse8->msg_lock, irq_flags);
+			schedule_work(&pulse8->irq_work);
+			pulse8->new_rx_msg_len = 0;
+			break;
+		case MSGCODE_TRANSMIT_SUCCEEDED:
+			WARN_ON(pulse8->tx_done_status);
+			pulse8->tx_done_status = CEC_TX_STATUS_OK;
+			schedule_work(&pulse8->irq_work);
+			break;
+		case MSGCODE_TRANSMIT_FAILED_ACK:
+			/*
+			 * A NACK for a broadcast message makes no sense, these
+			 * seem to be spurious messages and are skipped.
+			 */
+			if (pulse8->tx_msg_is_bcast)
+				break;
+			WARN_ON(pulse8->tx_done_status);
+			pulse8->tx_done_status = CEC_TX_STATUS_NACK;
+			schedule_work(&pulse8->irq_work);
+			break;
+		case MSGCODE_TRANSMIT_FAILED_LINE:
+		case MSGCODE_TRANSMIT_FAILED_TIMEOUT_DATA:
+		case MSGCODE_TRANSMIT_FAILED_TIMEOUT_LINE:
+			WARN_ON(pulse8->tx_done_status);
+			pulse8->tx_done_status = CEC_TX_STATUS_ERROR;
+			schedule_work(&pulse8->irq_work);
+			break;
+		case MSGCODE_HIGH_ERROR:
+		case MSGCODE_LOW_ERROR:
+		case MSGCODE_RECEIVE_FAILED:
+		case MSGCODE_TIMEOUT_ERROR:
+			pulse8->new_rx_msg_len = 0;
+			break;
+		case MSGCODE_COMMAND_ACCEPTED:
+		case MSGCODE_COMMAND_REJECTED:
+		default:
+			if (pulse8->idx == 0)
+				break;
+			memcpy(pulse8->data, pulse8->buf, pulse8->idx);
+			pulse8->len = pulse8->idx;
+			complete(&pulse8->cmd_done);
+			break;
+		}
+		pulse8->idx = 0;
+		pulse8->started = false;
+		return IRQ_HANDLED;
+	} else if (data == MSGSTART) {
+		pulse8->idx = 0;
+		pulse8->started = true;
+		return IRQ_HANDLED;
+	}
+
+	if (pulse8->idx >= DATA_SIZE) {
+		dev_dbg(pulse8->dev,
+			"throwing away %d bytes of garbage\n", pulse8->idx);
+		pulse8->idx = 0;
+	}
+	pulse8->buf[pulse8->idx++] = data;
+	return IRQ_HANDLED;
+}
+
+static int pulse8_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct pulse8 *pulse8 = cec_get_drvdata(adap);
+	u8 cmd[16];
+	int err;
+
+	mutex_lock(&pulse8->lock);
+	cmd[0] = MSGCODE_SET_CONTROLLED;
+	cmd[1] = enable;
+	err = pulse8_send_and_wait(pulse8, cmd, 2,
+				   MSGCODE_COMMAND_ACCEPTED, 1);
+	if (!enable) {
+		pulse8->rx_msg_num = 0;
+		pulse8->tx_done_status = 0;
+	}
+	mutex_unlock(&pulse8->lock);
+	return enable ? err : 0;
+}
+
+static int pulse8_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
+{
+	struct pulse8 *pulse8 = cec_get_drvdata(adap);
+	u16 mask = 0;
+	u16 pa = adap->phys_addr;
+	u8 cmd[16];
+	int err = 0;
+
+	mutex_lock(&pulse8->lock);
+	if (log_addr != CEC_LOG_ADDR_INVALID)
+		mask = 1 << log_addr;
+	cmd[0] = MSGCODE_SET_ACK_MASK;
+	cmd[1] = mask >> 8;
+	cmd[2] = mask & 0xff;
+	err = pulse8_send_and_wait(pulse8, cmd, 3,
+				   MSGCODE_COMMAND_ACCEPTED, 0);
+	if ((err && mask != 0) || pulse8->restoring_config)
+		goto unlock;
+
+	cmd[0] = MSGCODE_SET_AUTO_ENABLED;
+	cmd[1] = log_addr == CEC_LOG_ADDR_INVALID ? 0 : 1;
+	err = pulse8_send_and_wait(pulse8, cmd, 2,
+				   MSGCODE_COMMAND_ACCEPTED, 0);
+	if (err)
+		goto unlock;
+	pulse8->autonomous = cmd[1];
+	if (log_addr == CEC_LOG_ADDR_INVALID)
+		goto unlock;
+
+	cmd[0] = MSGCODE_SET_DEVICE_TYPE;
+	cmd[1] = adap->log_addrs.primary_device_type[0];
+	err = pulse8_send_and_wait(pulse8, cmd, 2,
+				   MSGCODE_COMMAND_ACCEPTED, 0);
+	if (err)
+		goto unlock;
+
+	switch (adap->log_addrs.primary_device_type[0]) {
+	case CEC_OP_PRIM_DEVTYPE_TV:
+		mask = CEC_LOG_ADDR_MASK_TV;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_RECORD:
+		mask = CEC_LOG_ADDR_MASK_RECORD;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_TUNER:
+		mask = CEC_LOG_ADDR_MASK_TUNER;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_PLAYBACK:
+		mask = CEC_LOG_ADDR_MASK_PLAYBACK;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM:
+		mask = CEC_LOG_ADDR_MASK_AUDIOSYSTEM;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_SWITCH:
+		mask = CEC_LOG_ADDR_MASK_UNREGISTERED;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_PROCESSOR:
+		mask = CEC_LOG_ADDR_MASK_SPECIFIC;
+		break;
+	default:
+		mask = 0;
+		break;
+	}
+	cmd[0] = MSGCODE_SET_LOGICAL_ADDRESS_MASK;
+	cmd[1] = mask >> 8;
+	cmd[2] = mask & 0xff;
+	err = pulse8_send_and_wait(pulse8, cmd, 3,
+				   MSGCODE_COMMAND_ACCEPTED, 0);
+	if (err)
+		goto unlock;
+
+	cmd[0] = MSGCODE_SET_DEFAULT_LOGICAL_ADDRESS;
+	cmd[1] = log_addr;
+	err = pulse8_send_and_wait(pulse8, cmd, 2,
+				   MSGCODE_COMMAND_ACCEPTED, 0);
+	if (err)
+		goto unlock;
+
+	cmd[0] = MSGCODE_SET_PHYSICAL_ADDRESS;
+	cmd[1] = pa >> 8;
+	cmd[2] = pa & 0xff;
+	err = pulse8_send_and_wait(pulse8, cmd, 3,
+				   MSGCODE_COMMAND_ACCEPTED, 0);
+	if (err)
+		goto unlock;
+
+	if (pulse8->vers < 10) {
+		cmd[0] = MSGCODE_SET_HDMI_VERSION;
+		cmd[1] = adap->log_addrs.cec_version;
+		err = pulse8_send_and_wait(pulse8, cmd, 2,
+					   MSGCODE_COMMAND_ACCEPTED, 0);
+		if (err)
+			goto unlock;
+	}
+
+	if (adap->log_addrs.osd_name[0]) {
+		size_t osd_len = strlen(adap->log_addrs.osd_name);
+		char *osd_str = cmd + 1;
+
+		cmd[0] = MSGCODE_SET_OSD_NAME;
+		strscpy(cmd + 1, adap->log_addrs.osd_name, sizeof(cmd) - 1);
+		if (osd_len < 4) {
+			memset(osd_str + osd_len, ' ', 4 - osd_len);
+			osd_len = 4;
+			osd_str[osd_len] = '\0';
+			strscpy(adap->log_addrs.osd_name, osd_str,
+				sizeof(adap->log_addrs.osd_name));
+		}
+		err = pulse8_send_and_wait(pulse8, cmd, 1 + osd_len,
+					   MSGCODE_COMMAND_ACCEPTED, 0);
+		if (err)
+			goto unlock;
+	}
+
+unlock:
+	if (pulse8->restoring_config)
+		pulse8->restoring_config = false;
+	else
+		pulse8->config_pending = true;
+	mutex_unlock(&pulse8->lock);
+	return log_addr == CEC_LOG_ADDR_INVALID ? 0 : err;
+}
+
+static int pulse8_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				    u32 signal_free_time, struct cec_msg *msg)
+{
+	struct pulse8 *pulse8 = cec_get_drvdata(adap);
+
+	pulse8->tx_msg = *msg;
+	if (debug)
+		dev_info(pulse8->dev, "adap transmit %*ph\n",
+			 msg->len, msg->msg);
+	pulse8->tx_signal_free_time = signal_free_time;
+	schedule_work(&pulse8->tx_work);
+	return 0;
+}
+
+static void pulse8_cec_adap_free(struct cec_adapter *adap)
+{
+	struct pulse8 *pulse8 = cec_get_drvdata(adap);
+
+	cancel_delayed_work_sync(&pulse8->ping_eeprom_work);
+	cancel_work_sync(&pulse8->irq_work);
+	cancel_work_sync(&pulse8->tx_work);
+	kfree(pulse8);
+}
+
+static const struct cec_adap_ops pulse8_cec_adap_ops = {
+	.adap_enable = pulse8_cec_adap_enable,
+	.adap_log_addr = pulse8_cec_adap_log_addr,
+	.adap_transmit = pulse8_cec_adap_transmit,
+	.adap_free = pulse8_cec_adap_free,
+};
+
+static void pulse8_disconnect(struct serio *serio)
+{
+	struct pulse8 *pulse8 = serio_get_drvdata(serio);
+
+	cancel_delayed_work_sync(&pulse8->ping_eeprom_work);
+	mutex_lock(&pulse8->lock);
+	pulse8->serio = NULL;
+	mutex_unlock(&pulse8->lock);
+	cec_unregister_adapter(pulse8->adap);
+	serio_set_drvdata(serio, NULL);
+	serio_close(serio);
+}
+
+static int pulse8_setup(struct pulse8 *pulse8, struct serio *serio,
+			struct cec_log_addrs *log_addrs, u16 *pa)
+{
+	u8 *data = pulse8->data + 1;
+	u8 cmd[2];
+	int err;
+	time64_t date;
+
+	pulse8->vers = 0;
+
+	cmd[0] = MSGCODE_FIRMWARE_VERSION;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 2);
+	if (err)
+		return err;
+	pulse8->vers = (data[0] << 8) | data[1];
+	dev_info(pulse8->dev, "Firmware version %04x\n", pulse8->vers);
+	if (pulse8->vers < 2) {
+		*pa = CEC_PHYS_ADDR_INVALID;
+		return 0;
+	}
+
+	cmd[0] = MSGCODE_GET_BUILDDATE;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 4);
+	if (err)
+		return err;
+	date = ((unsigned)data[0] << 24) | (data[1] << 16) | (data[2] << 8) | data[3];
+	dev_info(pulse8->dev, "Firmware build date %ptT\n", &date);
+
+	dev_dbg(pulse8->dev, "Persistent config:\n");
+	cmd[0] = MSGCODE_GET_AUTO_ENABLED;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
+	if (err)
+		return err;
+	pulse8->autonomous = data[0];
+	dev_dbg(pulse8->dev, "Autonomous mode: %s",
+		data[0] ? "on" : "off");
+
+	if (pulse8->vers >= 10) {
+		cmd[0] = MSGCODE_GET_AUTO_POWER_ON;
+		err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
+		if (!err)
+			dev_dbg(pulse8->dev, "Auto Power On: %s",
+				data[0] ? "on" : "off");
+	}
+
+	cmd[0] = MSGCODE_GET_DEVICE_TYPE;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
+	if (err)
+		return err;
+	log_addrs->primary_device_type[0] = data[0];
+	dev_dbg(pulse8->dev, "Primary device type: %d\n", data[0]);
+	switch (log_addrs->primary_device_type[0]) {
+	case CEC_OP_PRIM_DEVTYPE_TV:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_TV;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_TV;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_RECORD:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_RECORD;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_RECORD;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_TUNER:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_TUNER;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_TUNER;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_PLAYBACK:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_PLAYBACK;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_PLAYBACK;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_PLAYBACK;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_SWITCH:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_SWITCH;
+		break;
+	case CEC_OP_PRIM_DEVTYPE_PROCESSOR:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_SPECIFIC;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_SWITCH;
+		break;
+	default:
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED;
+		log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_SWITCH;
+		dev_info(pulse8->dev, "Unknown Primary Device Type: %d\n",
+			 log_addrs->primary_device_type[0]);
+		break;
+	}
+
+	cmd[0] = MSGCODE_GET_LOGICAL_ADDRESS_MASK;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 2);
+	if (err)
+		return err;
+	log_addrs->log_addr_mask = (data[0] << 8) | data[1];
+	dev_dbg(pulse8->dev, "Logical address ACK mask: %x\n",
+		log_addrs->log_addr_mask);
+	if (log_addrs->log_addr_mask)
+		log_addrs->num_log_addrs = 1;
+
+	cmd[0] = MSGCODE_GET_PHYSICAL_ADDRESS;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
+	if (err)
+		return err;
+	*pa = (data[0] << 8) | data[1];
+	dev_dbg(pulse8->dev, "Physical address: %x.%x.%x.%x\n",
+		cec_phys_addr_exp(*pa));
+
+	log_addrs->cec_version = CEC_OP_CEC_VERSION_1_4;
+	if (pulse8->vers < 10) {
+		cmd[0] = MSGCODE_GET_HDMI_VERSION;
+		err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
+		if (err)
+			return err;
+		log_addrs->cec_version = data[0];
+		dev_dbg(pulse8->dev, "CEC version: %d\n", log_addrs->cec_version);
+	}
+
+	cmd[0] = MSGCODE_GET_OSD_NAME;
+	err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 0);
+	if (err)
+		return err;
+	strscpy(log_addrs->osd_name, data, sizeof(log_addrs->osd_name));
+	dev_dbg(pulse8->dev, "OSD name: %s\n", log_addrs->osd_name);
+
+	return 0;
+}
+
+static int pulse8_apply_persistent_config(struct pulse8 *pulse8,
+					  struct cec_log_addrs *log_addrs,
+					  u16 pa)
+{
+	int err;
+
+	err = cec_s_log_addrs(pulse8->adap, log_addrs, false);
+	if (err)
+		return err;
+
+	cec_s_phys_addr(pulse8->adap, pa, false);
+
+	return 0;
+}
+
+static void pulse8_ping_eeprom_work_handler(struct work_struct *work)
+{
+	struct pulse8 *pulse8 =
+		container_of(work, struct pulse8, ping_eeprom_work.work);
+	u8 cmd;
+
+	mutex_lock(&pulse8->lock);
+	cmd = MSGCODE_PING;
+	if (pulse8_send_and_wait(pulse8, &cmd, 1,
+				 MSGCODE_COMMAND_ACCEPTED, 0)) {
+		dev_warn(pulse8->dev, "failed to ping EEPROM\n");
+		goto unlock;
+	}
+
+	if (pulse8->vers < 2)
+		goto unlock;
+
+	if (pulse8->config_pending && persistent_config) {
+		dev_dbg(pulse8->dev, "writing pending config to EEPROM\n");
+		cmd = MSGCODE_WRITE_EEPROM;
+		if (pulse8_send_and_wait(pulse8, &cmd, 1,
+					 MSGCODE_COMMAND_ACCEPTED, 0))
+			dev_info(pulse8->dev, "failed to write pending config to EEPROM\n");
+		else
+			pulse8->config_pending = false;
+	}
+unlock:
+	schedule_delayed_work(&pulse8->ping_eeprom_work, PING_PERIOD);
+	mutex_unlock(&pulse8->lock);
+}
+
+static int pulse8_connect(struct serio *serio, struct serio_driver *drv)
+{
+	u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_PHYS_ADDR | CEC_CAP_MONITOR_ALL;
+	struct pulse8 *pulse8;
+	int err = -ENOMEM;
+	struct cec_log_addrs log_addrs = {};
+	u16 pa = CEC_PHYS_ADDR_INVALID;
+
+	pulse8 = kzalloc_obj(*pulse8);
+
+	if (!pulse8)
+		return -ENOMEM;
+
+	pulse8->serio = serio;
+	pulse8->adap = cec_allocate_adapter(&pulse8_cec_adap_ops, pulse8,
+					    dev_name(&serio->dev), caps, 1);
+	err = PTR_ERR_OR_ZERO(pulse8->adap);
+	if (err < 0) {
+		kfree(pulse8);
+		return err;
+	}
+
+	pulse8->dev = &serio->dev;
+	serio_set_drvdata(serio, pulse8);
+	INIT_WORK(&pulse8->irq_work, pulse8_irq_work_handler);
+	INIT_WORK(&pulse8->tx_work, pulse8_tx_work_handler);
+	INIT_DELAYED_WORK(&pulse8->ping_eeprom_work,
+			  pulse8_ping_eeprom_work_handler);
+	mutex_init(&pulse8->lock);
+	spin_lock_init(&pulse8->msg_lock);
+	pulse8->config_pending = false;
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto delete_adap;
+
+	err = pulse8_setup(pulse8, serio, &log_addrs, &pa);
+	if (err)
+		goto close_serio;
+
+	err = cec_register_adapter(pulse8->adap, &serio->dev);
+	if (err < 0)
+		goto close_serio;
+
+	pulse8->dev = &pulse8->adap->devnode.dev;
+
+	if (persistent_config && pulse8->autonomous) {
+		err = pulse8_apply_persistent_config(pulse8, &log_addrs, pa);
+		if (err)
+			goto close_serio;
+		pulse8->restoring_config = true;
+	}
+
+	schedule_delayed_work(&pulse8->ping_eeprom_work, PING_PERIOD);
+
+	return 0;
+
+close_serio:
+	pulse8->serio = NULL;
+	serio_set_drvdata(serio, NULL);
+	serio_close(serio);
+delete_adap:
+	cec_delete_adapter(pulse8->adap);
+	return err;
+}
+
+static const struct serio_device_id pulse8_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_PULSE8_CEC,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, pulse8_serio_ids);
+
+static struct serio_driver pulse8_drv = {
+	.driver		= {
+		.name	= "pulse8-cec",
+	},
+	.description	= "Pulse Eight HDMI CEC driver",
+	.id_table	= pulse8_serio_ids,
+	.interrupt	= pulse8_interrupt,
+	.connect	= pulse8_connect,
+	.disconnect	= pulse8_disconnect,
+};
+
+module_serio_driver(pulse8_drv);

linux-7.2.3/drivers/media/cec/usb/rainshadow/Kconfig

@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config USB_RAINSHADOW_CEC
+	tristate "RainShadow Tech HDMI CEC"
+	select CEC_CORE
+	select USB
+	select USB_ACM
+	select SERIO
+	select SERIO_SERPORT
+	help
+	  This is a cec driver for the RainShadow Tech HDMI CEC device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rainshadow-cec.

linux-7.2.3/drivers/media/cec/usb/rainshadow/Makefile

@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_USB_RAINSHADOW_CEC) += rainshadow-cec.o

linux-7.2.3/drivers/media/cec/usb/rainshadow/rainshadow-cec.c

@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * RainShadow Tech HDMI CEC driver
+ *
+ * Copyright 2016 Hans Verkuil <hverkuil@kernel.org>
+ */
+
+/*
+ * Notes:
+ *
+ * The higher level protocols are currently disabled. This can be added
+ * later, similar to how this is done for the Pulse Eight CEC driver.
+ *
+ * Documentation of the protocol is available here:
+ *
+ * http://rainshadowtech.com/doc/HDMICECtoUSBandRS232v2.0.pdf
+ */
+
+#include <linux/completion.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/hex.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/time.h>
+#include <linux/workqueue.h>
+
+#include <media/cec.h>
+
+MODULE_AUTHOR("Hans Verkuil <hverkuil@kernel.org>");
+MODULE_DESCRIPTION("RainShadow Tech HDMI CEC driver");
+MODULE_LICENSE("GPL");
+
+#define DATA_SIZE 256
+
+struct rain {
+	struct device *dev;
+	struct serio *serio;
+	struct cec_adapter *adap;
+	struct completion cmd_done;
+	struct work_struct work;
+
+	/* Low-level ringbuffer, collecting incoming characters */
+	char buf[DATA_SIZE];
+	unsigned int buf_rd_idx;
+	unsigned int buf_wr_idx;
+	unsigned int buf_len;
+	spinlock_t buf_lock;
+
+	/* command buffer */
+	char cmd[DATA_SIZE];
+	unsigned int cmd_idx;
+	bool cmd_started;
+
+	/* reply to a command, only used to store the firmware version */
+	char cmd_reply[DATA_SIZE];
+
+	struct mutex write_lock;
+};
+
+static void rain_process_msg(struct rain *rain)
+{
+	struct cec_msg msg = {};
+	const char *cmd = rain->cmd + 3;
+	int stat = -1;
+
+	for (; *cmd; cmd++) {
+		if (!isxdigit(*cmd))
+			continue;
+		if (isxdigit(cmd[0]) && isxdigit(cmd[1])) {
+			if (msg.len == CEC_MAX_MSG_SIZE)
+				break;
+			if (hex2bin(msg.msg + msg.len, cmd, 1))
+				continue;
+			msg.len++;
+			cmd++;
+			continue;
+		}
+		if (!cmd[1])
+			stat = hex_to_bin(cmd[0]);
+		break;
+	}
+
+	if (rain->cmd[0] == 'R') {
+		if (stat == 1 || stat == 2)
+			cec_received_msg(rain->adap, &msg);
+		return;
+	}
+
+	switch (stat) {
+	case 1:
+		cec_transmit_attempt_done(rain->adap, CEC_TX_STATUS_OK);
+		break;
+	case 2:
+		cec_transmit_attempt_done(rain->adap, CEC_TX_STATUS_NACK);
+		break;
+	default:
+		cec_transmit_attempt_done(rain->adap, CEC_TX_STATUS_LOW_DRIVE);
+		break;
+	}
+}
+
+static void rain_irq_work_handler(struct work_struct *work)
+{
+	struct rain *rain =
+		container_of(work, struct rain, work);
+
+	while (true) {
+		unsigned long flags;
+		char data;
+
+		spin_lock_irqsave(&rain->buf_lock, flags);
+		if (!rain->buf_len) {
+			spin_unlock_irqrestore(&rain->buf_lock, flags);
+			break;
+		}
+
+		data = rain->buf[rain->buf_rd_idx];
+		rain->buf_len--;
+		rain->buf_rd_idx = (rain->buf_rd_idx + 1) & 0xff;
+
+		spin_unlock_irqrestore(&rain->buf_lock, flags);
+
+		if (!rain->cmd_started && data != '?')
+			continue;
+
+		switch (data) {
+		case '\r':
+			rain->cmd[rain->cmd_idx] = '\0';
+			dev_dbg(rain->dev, "received: %s\n", rain->cmd);
+			if (!memcmp(rain->cmd, "REC", 3) ||
+			    !memcmp(rain->cmd, "STA", 3)) {
+				rain_process_msg(rain);
+			} else {
+				strscpy(rain->cmd_reply, rain->cmd,
+					sizeof(rain->cmd_reply));
+				complete(&rain->cmd_done);
+			}
+			rain->cmd_idx = 0;
+			rain->cmd_started = false;
+			break;
+
+		case '\n':
+			rain->cmd_idx = 0;
+			rain->cmd_started = false;
+			break;
+
+		case '?':
+			rain->cmd_idx = 0;
+			rain->cmd_started = true;
+			break;
+
+		default:
+			if (rain->cmd_idx >= DATA_SIZE - 1) {
+				dev_dbg(rain->dev,
+					"throwing away %d bytes of garbage\n", rain->cmd_idx);
+				rain->cmd_idx = 0;
+			}
+			rain->cmd[rain->cmd_idx++] = data;
+			break;
+		}
+	}
+}
+
+static irqreturn_t rain_interrupt(struct serio *serio, unsigned char data,
+				    unsigned int flags)
+{
+	struct rain *rain = serio_get_drvdata(serio);
+
+	spin_lock(&rain->buf_lock);
+	if (rain->buf_len == DATA_SIZE) {
+		spin_unlock(&rain->buf_lock);
+		dev_warn_once(rain->dev, "buffer overflow\n");
+		return IRQ_HANDLED;
+	}
+	rain->buf_len++;
+	rain->buf[rain->buf_wr_idx] = data;
+	rain->buf_wr_idx = (rain->buf_wr_idx + 1) & 0xff;
+	spin_unlock(&rain->buf_lock);
+	schedule_work(&rain->work);
+	return IRQ_HANDLED;
+}
+
+static void rain_disconnect(struct serio *serio)
+{
+	struct rain *rain = serio_get_drvdata(serio);
+
+	cancel_work_sync(&rain->work);
+	cec_unregister_adapter(rain->adap);
+	dev_info(&serio->dev, "disconnected\n");
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	kfree(rain);
+}
+
+static int rain_send(struct rain *rain, const char *command)
+{
+	int err = serio_write(rain->serio, '!');
+
+	dev_dbg(rain->dev, "send: %s\n", command);
+	while (!err && *command)
+		err = serio_write(rain->serio, *command++);
+	if (!err)
+		err = serio_write(rain->serio, '~');
+
+	return err;
+}
+
+static int rain_send_and_wait(struct rain *rain,
+			      const char *cmd, const char *reply)
+{
+	int err;
+
+	init_completion(&rain->cmd_done);
+
+	mutex_lock(&rain->write_lock);
+	err = rain_send(rain, cmd);
+	if (err)
+		goto err;
+
+	if (!wait_for_completion_timeout(&rain->cmd_done, HZ)) {
+		err = -ETIMEDOUT;
+		goto err;
+	}
+	if (reply && strncmp(rain->cmd_reply, reply, strlen(reply))) {
+		dev_dbg(rain->dev,
+			 "transmit of '%s': received '%s' instead of '%s'\n",
+			 cmd, rain->cmd_reply, reply);
+		err = -EIO;
+	}
+err:
+	mutex_unlock(&rain->write_lock);
+	return err;
+}
+
+static int rain_setup(struct rain *rain, struct serio *serio,
+			struct cec_log_addrs *log_addrs, u16 *pa)
+{
+	int err;
+
+	err = rain_send_and_wait(rain, "R", "REV");
+	if (err)
+		return err;
+	dev_info(rain->dev, "Firmware version %s\n", rain->cmd_reply + 4);
+
+	err = rain_send_and_wait(rain, "Q 1", "QTY");
+	if (err)
+		return err;
+	err = rain_send_and_wait(rain, "c0000", "CFG");
+	if (err)
+		return err;
+	return rain_send_and_wait(rain, "A F 0000", "ADR");
+}
+
+static int rain_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	return 0;
+}
+
+static int rain_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
+{
+	struct rain *rain = cec_get_drvdata(adap);
+	u8 cmd[16];
+
+	if (log_addr == CEC_LOG_ADDR_INVALID)
+		log_addr = CEC_LOG_ADDR_UNREGISTERED;
+	snprintf(cmd, sizeof(cmd), "A %x", log_addr);
+	return rain_send_and_wait(rain, cmd, "ADR");
+}
+
+static int rain_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				    u32 signal_free_time, struct cec_msg *msg)
+{
+	struct rain *rain = cec_get_drvdata(adap);
+	char cmd[2 * CEC_MAX_MSG_SIZE + 16];
+	unsigned int i;
+	int err;
+
+	if (msg->len == 1) {
+		snprintf(cmd, sizeof(cmd), "x%x", cec_msg_destination(msg));
+	} else {
+		char hex[3];
+
+		snprintf(cmd, sizeof(cmd), "x%x %02x ",
+			 cec_msg_destination(msg), msg->msg[1]);
+		for (i = 2; i < msg->len; i++) {
+			snprintf(hex, sizeof(hex), "%02x", msg->msg[i]);
+			strlcat(cmd, hex, sizeof(cmd));
+		}
+	}
+	mutex_lock(&rain->write_lock);
+	err = rain_send(rain, cmd);
+	mutex_unlock(&rain->write_lock);
+	return err;
+}
+
+static const struct cec_adap_ops rain_cec_adap_ops = {
+	.adap_enable = rain_cec_adap_enable,
+	.adap_log_addr = rain_cec_adap_log_addr,
+	.adap_transmit = rain_cec_adap_transmit,
+};
+
+static int rain_connect(struct serio *serio, struct serio_driver *drv)
+{
+	u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_PHYS_ADDR | CEC_CAP_MONITOR_ALL;
+	struct rain *rain;
+	int err = -ENOMEM;
+	struct cec_log_addrs log_addrs = {};
+	u16 pa = CEC_PHYS_ADDR_INVALID;
+
+	rain = kzalloc_obj(*rain);
+
+	if (!rain)
+		return -ENOMEM;
+
+	rain->serio = serio;
+	rain->adap = cec_allocate_adapter(&rain_cec_adap_ops, rain,
+					  dev_name(&serio->dev), caps, 1);
+	err = PTR_ERR_OR_ZERO(rain->adap);
+	if (err < 0)
+		goto free_device;
+
+	rain->dev = &serio->dev;
+	serio_set_drvdata(serio, rain);
+	INIT_WORK(&rain->work, rain_irq_work_handler);
+	mutex_init(&rain->write_lock);
+	spin_lock_init(&rain->buf_lock);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto delete_adap;
+
+	err = rain_setup(rain, serio, &log_addrs, &pa);
+	if (err)
+		goto close_serio;
+
+	err = cec_register_adapter(rain->adap, &serio->dev);
+	if (err < 0)
+		goto close_serio;
+
+	rain->dev = &rain->adap->devnode.dev;
+	return 0;
+
+close_serio:
+	serio_close(serio);
+delete_adap:
+	cec_delete_adapter(rain->adap);
+	serio_set_drvdata(serio, NULL);
+free_device:
+	kfree(rain);
+	return err;
+}
+
+static const struct serio_device_id rain_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_RAINSHADOW_CEC,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, rain_serio_ids);
+
+static struct serio_driver rain_drv = {
+	.driver		= {
+		.name	= "rainshadow-cec",
+	},
+	.description	= "RainShadow Tech HDMI CEC driver",
+	.id_table	= rain_serio_ids,
+	.interrupt	= rain_interrupt,
+	.connect	= rain_connect,
+	.disconnect	= rain_disconnect,
+};
+
+module_serio_driver(rain_drv);