Resguardo inicial

linux-7.2.3/drivers/media/pci/saa7164/Kconfig

@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config VIDEO_SAA7164
+	tristate "NXP SAA7164 support"
+	depends on DVB_CORE && VIDEO_DEV && PCI && I2C
+	select I2C_ALGOBIT
+	select FW_LOADER
+	select VIDEO_TUNER
+	select VIDEO_TVEEPROM
+	select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  This is a video4linux driver for NXP SAA7164 based
+	  TV cards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7164
+

linux-7.2.3/drivers/media/pci/saa7164/Makefile

@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+saa7164-objs	:= saa7164-cards.o saa7164-core.o saa7164-i2c.o saa7164-dvb.o \
+			saa7164-fw.o saa7164-bus.o saa7164-cmd.o saa7164-api.o \
+			saa7164-buffer.o saa7164-encoder.o saa7164-vbi.o
+
+obj-$(CONFIG_VIDEO_SAA7164) += saa7164.o
+
+ccflags-y += -I$(srctree)/drivers/media/tuners
+ccflags-y += -I$(srctree)/drivers/media/dvb-frontends

linux-7.2.3/drivers/media/pci/saa7164/saa7164-buffer.c

@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
+ */
+
+#include <linux/slab.h>
+
+#include "saa7164.h"
+
+/* The PCI address space for buffer handling looks like this:
+ *
+ * +-u32 wide-------------+
+ * |                      +
+ * +-u64 wide------------------------------------+
+ * +                                             +
+ * +----------------------+
+ * | CurrentBufferPtr     + Pointer to current PCI buffer >-+
+ * +----------------------+                                 |
+ * | Unused               +                                 |
+ * +----------------------+                                 |
+ * | Pitch                + = 188 (bytes)                   |
+ * +----------------------+                                 |
+ * | PCI buffer size      + = pitch * number of lines (312) |
+ * +----------------------+                                 |
+ * |0| Buf0 Write Offset  +                                 |
+ * +----------------------+                                 v
+ * |1| Buf1 Write Offset  +                                 |
+ * +----------------------+                                 |
+ * |2| Buf2 Write Offset  +                                 |
+ * +----------------------+                                 |
+ * |3| Buf3 Write Offset  +                                 |
+ * +----------------------+                                 |
+ * ... More write offsets                                   |
+ * +---------------------------------------------+          |
+ * +0| set of ptrs to PCI pagetables             +          |
+ * +---------------------------------------------+          |
+ * +1| set of ptrs to PCI pagetables             + <--------+
+ * +---------------------------------------------+
+ * +2| set of ptrs to PCI pagetables             +
+ * +---------------------------------------------+
+ * +3| set of ptrs to PCI pagetables             + >--+
+ * +---------------------------------------------+    |
+ * ... More buffer pointers                           |  +----------------+
+ *						    +->| pt[0] TS data  |
+ *						    |  +----------------+
+ *						    |
+ *						    |  +----------------+
+ *						    +->| pt[1] TS data  |
+ *						    |  +----------------+
+ *						    | etc
+ */
+
+/* Allocate a new buffer structure and associated PCI space in bytes.
+ * len must be a multiple of sizeof(u64)
+ */
+struct saa7164_buffer *saa7164_buffer_alloc(struct saa7164_port *port,
+	u32 len)
+{
+	struct tmHWStreamParameters *params = &port->hw_streamingparams;
+	struct saa7164_buffer *buf = NULL;
+	struct saa7164_dev *dev = port->dev;
+	int i;
+
+	if ((len == 0) || (len >= 65536) || (len % sizeof(u64))) {
+		log_warn("%s() SAA_ERR_BAD_PARAMETER\n", __func__);
+		goto ret;
+	}
+
+	buf = kzalloc_obj(*buf);
+	if (!buf)
+		goto ret;
+
+	buf->idx = -1;
+	buf->port = port;
+	buf->flags = SAA7164_BUFFER_FREE;
+	buf->pos = 0;
+	buf->actual_size = params->pitch * params->numberoflines;
+	buf->crc = 0;
+	/* TODO: arg len is being ignored */
+	buf->pci_size = SAA7164_PT_ENTRIES * 0x1000;
+	buf->pt_size = (SAA7164_PT_ENTRIES * sizeof(u64)) + 0x1000;
+
+	/* Allocate contiguous memory */
+	buf->cpu = dma_alloc_coherent(&port->dev->pci->dev, buf->pci_size,
+				      &buf->dma, GFP_KERNEL);
+	if (!buf->cpu)
+		goto fail1;
+
+	buf->pt_cpu = dma_alloc_coherent(&port->dev->pci->dev, buf->pt_size,
+					 &buf->pt_dma, GFP_KERNEL);
+	if (!buf->pt_cpu)
+		goto fail2;
+
+	/* init the buffers to a known pattern, easier during debugging */
+	memset(buf->cpu, 0xff, buf->pci_size);
+	buf->crc = crc32(0, buf->cpu, buf->actual_size);
+	memset(buf->pt_cpu, 0xff, buf->pt_size);
+
+	dprintk(DBGLVL_BUF, "%s()   allocated buffer @ 0x%p (%d pageptrs)\n",
+		__func__, buf, params->numpagetables);
+	dprintk(DBGLVL_BUF, "  pci_cpu @ 0x%p    dma @ 0x%08lx len = 0x%x\n",
+		buf->cpu, (long)buf->dma, buf->pci_size);
+	dprintk(DBGLVL_BUF, "   pt_cpu @ 0x%p pt_dma @ 0x%08lx len = 0x%x\n",
+		buf->pt_cpu, (long)buf->pt_dma, buf->pt_size);
+
+	/* Format the Page Table Entries to point into the data buffer */
+	for (i = 0 ; i < params->numpagetables; i++) {
+
+		*(buf->pt_cpu + i) = buf->dma + (i * 0x1000); /* TODO */
+		dprintk(DBGLVL_BUF, "    pt[%02d] = 0x%p -> 0x%llx\n",
+			i, buf->pt_cpu, (u64)*(buf->pt_cpu));
+
+	}
+
+	goto ret;
+
+fail2:
+	dma_free_coherent(&port->dev->pci->dev, buf->pci_size, buf->cpu,
+			  buf->dma);
+fail1:
+	kfree(buf);
+
+	buf = NULL;
+ret:
+	return buf;
+}
+
+int saa7164_buffer_dealloc(struct saa7164_buffer *buf)
+{
+	struct saa7164_dev *dev;
+
+	if (!buf || !buf->port)
+		return SAA_ERR_BAD_PARAMETER;
+	dev = buf->port->dev;
+
+	dprintk(DBGLVL_BUF, "%s() deallocating buffer @ 0x%p\n",
+		__func__, buf);
+
+	if (buf->flags != SAA7164_BUFFER_FREE)
+		log_warn(" freeing a non-free buffer\n");
+
+	dma_free_coherent(&dev->pci->dev, buf->pci_size, buf->cpu, buf->dma);
+	dma_free_coherent(&dev->pci->dev, buf->pt_size, buf->pt_cpu,
+			  buf->pt_dma);
+
+	kfree(buf);
+
+	return SAA_OK;
+}
+
+int saa7164_buffer_zero_offsets(struct saa7164_port *port, int i)
+{
+	struct saa7164_dev *dev = port->dev;
+
+	if ((i < 0) || (i >= port->hwcfg.buffercount))
+		return -EINVAL;
+
+	dprintk(DBGLVL_BUF, "%s(idx = %d)\n", __func__, i);
+
+	saa7164_writel(port->bufoffset + (sizeof(u32) * i), 0);
+
+	return 0;
+}
+
+/* Write a buffer into the hardware */
+int saa7164_buffer_activate(struct saa7164_buffer *buf, int i)
+{
+	struct saa7164_port *port = buf->port;
+	struct saa7164_dev *dev = port->dev;
+
+	if ((i < 0) || (i >= port->hwcfg.buffercount))
+		return -EINVAL;
+
+	dprintk(DBGLVL_BUF, "%s(idx = %d)\n", __func__, i);
+
+	buf->idx = i; /* Note of which buffer list index position we occupy */
+	buf->flags = SAA7164_BUFFER_BUSY;
+	buf->pos = 0;
+
+	/* TODO: Review this in light of 32v64 assignments */
+	saa7164_writel(port->bufoffset + (sizeof(u32) * i), 0);
+	saa7164_writel(port->bufptr32h + ((sizeof(u32) * 2) * i), buf->pt_dma);
+	saa7164_writel(port->bufptr32l + ((sizeof(u32) * 2) * i), 0);
+
+	dprintk(DBGLVL_BUF, "	buf[%d] offset 0x%llx (0x%x) buf 0x%llx/%llx (0x%x/%x) nr=%d\n",
+		buf->idx,
+		(u64)port->bufoffset + (i * sizeof(u32)),
+		saa7164_readl(port->bufoffset + (sizeof(u32) * i)),
+		(u64)port->bufptr32h + ((sizeof(u32) * 2) * i),
+		(u64)port->bufptr32l + ((sizeof(u32) * 2) * i),
+		saa7164_readl(port->bufptr32h + ((sizeof(u32) * i) * 2)),
+		saa7164_readl(port->bufptr32l + ((sizeof(u32) * i) * 2)),
+		buf->idx);
+
+	return 0;
+}
+
+int saa7164_buffer_cfg_port(struct saa7164_port *port)
+{
+	struct tmHWStreamParameters *params = &port->hw_streamingparams;
+	struct saa7164_dev *dev = port->dev;
+	struct saa7164_buffer *buf;
+	struct list_head *c, *n;
+	int i = 0;
+
+	dprintk(DBGLVL_BUF, "%s(port=%d)\n", __func__, port->nr);
+
+	saa7164_writel(port->bufcounter, 0);
+	saa7164_writel(port->pitch, params->pitch);
+	saa7164_writel(port->bufsize, params->pitch * params->numberoflines);
+
+	dprintk(DBGLVL_BUF, " configured:\n");
+	dprintk(DBGLVL_BUF, "   lmmio       0x%p\n", dev->lmmio);
+	dprintk(DBGLVL_BUF, "   bufcounter  0x%x = 0x%x\n", port->bufcounter,
+		saa7164_readl(port->bufcounter));
+
+	dprintk(DBGLVL_BUF, "   pitch       0x%x = %d\n", port->pitch,
+		saa7164_readl(port->pitch));
+
+	dprintk(DBGLVL_BUF, "   bufsize     0x%x = %d\n", port->bufsize,
+		saa7164_readl(port->bufsize));
+
+	dprintk(DBGLVL_BUF, "   buffercount = %d\n", port->hwcfg.buffercount);
+	dprintk(DBGLVL_BUF, "   bufoffset = 0x%x\n", port->bufoffset);
+	dprintk(DBGLVL_BUF, "   bufptr32h = 0x%x\n", port->bufptr32h);
+	dprintk(DBGLVL_BUF, "   bufptr32l = 0x%x\n", port->bufptr32l);
+
+	/* Poke the buffers and offsets into PCI space */
+	mutex_lock(&port->dmaqueue_lock);
+	list_for_each_safe(c, n, &port->dmaqueue.list) {
+		buf = list_entry(c, struct saa7164_buffer, list);
+
+		BUG_ON(buf->flags != SAA7164_BUFFER_FREE);
+
+		/* Place the buffer in the h/w queue */
+		saa7164_buffer_activate(buf, i);
+
+		/* Don't exceed the device maximum # bufs */
+		BUG_ON(i > port->hwcfg.buffercount);
+		i++;
+
+	}
+	mutex_unlock(&port->dmaqueue_lock);
+
+	return 0;
+}
+
+struct saa7164_user_buffer *saa7164_buffer_alloc_user(struct saa7164_dev *dev,
+	u32 len)
+{
+	struct saa7164_user_buffer *buf;
+
+	buf = kzalloc_obj(*buf);
+	if (!buf)
+		return NULL;
+
+	buf->data = kzalloc(len, GFP_KERNEL);
+
+	if (!buf->data) {
+		kfree(buf);
+		return NULL;
+	}
+
+	buf->actual_size = len;
+	buf->pos = 0;
+	buf->crc = 0;
+
+	dprintk(DBGLVL_BUF, "%s()   allocated user buffer @ 0x%p\n",
+		__func__, buf);
+
+	return buf;
+}
+
+void saa7164_buffer_dealloc_user(struct saa7164_user_buffer *buf)
+{
+	if (!buf)
+		return;
+
+	kfree(buf->data);
+	buf->data = NULL;
+
+	kfree(buf);
+}

linux-7.2.3/drivers/media/pci/saa7164/saa7164-bus.c

@@ -0,0 +1,467 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
+ */
+
+#include "saa7164.h"
+
+/* The message bus to/from the firmware is a ring buffer in PCI address
+ * space. Establish the defaults.
+ */
+int saa7164_bus_setup(struct saa7164_dev *dev)
+{
+	struct tmComResBusInfo *b	= &dev->bus;
+
+	mutex_init(&b->lock);
+
+	b->Type			= TYPE_BUS_PCIe;
+	b->m_wMaxReqSize	= SAA_DEVICE_MAXREQUESTSIZE;
+
+	b->m_pdwSetRing		= (u8 __iomem *)(dev->bmmio +
+		((u32)dev->busdesc.CommandRing));
+
+	b->m_dwSizeSetRing	= SAA_DEVICE_BUFFERBLOCKSIZE;
+
+	b->m_pdwGetRing		= (u8 __iomem *)(dev->bmmio +
+		((u32)dev->busdesc.ResponseRing));
+
+	b->m_dwSizeGetRing	= SAA_DEVICE_BUFFERBLOCKSIZE;
+
+	b->m_dwSetWritePos	= ((u32)dev->intfdesc.BARLocation) +
+		(2 * sizeof(u64));
+	b->m_dwSetReadPos	= b->m_dwSetWritePos + (1 * sizeof(u32));
+
+	b->m_dwGetWritePos	= b->m_dwSetWritePos + (2 * sizeof(u32));
+	b->m_dwGetReadPos	= b->m_dwSetWritePos + (3 * sizeof(u32));
+
+	return 0;
+}
+
+void saa7164_bus_dump(struct saa7164_dev *dev)
+{
+	struct tmComResBusInfo *b = &dev->bus;
+
+	dprintk(DBGLVL_BUS, "Dumping the bus structure:\n");
+	dprintk(DBGLVL_BUS, " .type             = %d\n", b->Type);
+	dprintk(DBGLVL_BUS, " .dev->bmmio       = 0x%p\n", dev->bmmio);
+	dprintk(DBGLVL_BUS, " .m_wMaxReqSize    = 0x%x\n", b->m_wMaxReqSize);
+	dprintk(DBGLVL_BUS, " .m_pdwSetRing     = 0x%p\n", b->m_pdwSetRing);
+	dprintk(DBGLVL_BUS, " .m_dwSizeSetRing  = 0x%x\n", b->m_dwSizeSetRing);
+	dprintk(DBGLVL_BUS, " .m_pdwGetRing     = 0x%p\n", b->m_pdwGetRing);
+	dprintk(DBGLVL_BUS, " .m_dwSizeGetRing  = 0x%x\n", b->m_dwSizeGetRing);
+
+	dprintk(DBGLVL_BUS, " .m_dwSetReadPos   = 0x%x (0x%08x)\n",
+		b->m_dwSetReadPos, saa7164_readl(b->m_dwSetReadPos));
+
+	dprintk(DBGLVL_BUS, " .m_dwSetWritePos  = 0x%x (0x%08x)\n",
+		b->m_dwSetWritePos, saa7164_readl(b->m_dwSetWritePos));
+
+	dprintk(DBGLVL_BUS, " .m_dwGetReadPos   = 0x%x (0x%08x)\n",
+		b->m_dwGetReadPos, saa7164_readl(b->m_dwGetReadPos));
+
+	dprintk(DBGLVL_BUS, " .m_dwGetWritePos  = 0x%x (0x%08x)\n",
+		b->m_dwGetWritePos, saa7164_readl(b->m_dwGetWritePos));
+
+}
+
+/* Intensionally throw a BUG() if the state of the message bus looks corrupt */
+static void saa7164_bus_verify(struct saa7164_dev *dev)
+{
+	struct tmComResBusInfo *b = &dev->bus;
+	int bug = 0;
+
+	if (saa7164_readl(b->m_dwSetReadPos) > b->m_dwSizeSetRing)
+		bug++;
+
+	if (saa7164_readl(b->m_dwSetWritePos) > b->m_dwSizeSetRing)
+		bug++;
+
+	if (saa7164_readl(b->m_dwGetReadPos) > b->m_dwSizeGetRing)
+		bug++;
+
+	if (saa7164_readl(b->m_dwGetWritePos) > b->m_dwSizeGetRing)
+		bug++;
+
+	if (bug) {
+		saa_debug = 0xffff; /* Ensure we get the bus dump */
+		saa7164_bus_dump(dev);
+		saa_debug = 1024; /* Ensure we get the bus dump */
+		BUG();
+	}
+}
+
+static void saa7164_bus_dumpmsg(struct saa7164_dev *dev, struct tmComResInfo *m,
+				void *buf)
+{
+	dprintk(DBGLVL_BUS, "Dumping msg structure:\n");
+	dprintk(DBGLVL_BUS, " .id               = %d\n",   m->id);
+	dprintk(DBGLVL_BUS, " .flags            = 0x%x\n", m->flags);
+	dprintk(DBGLVL_BUS, " .size             = 0x%x\n", m->size);
+	dprintk(DBGLVL_BUS, " .command          = 0x%x\n", m->command);
+	dprintk(DBGLVL_BUS, " .controlselector  = 0x%x\n", m->controlselector);
+	dprintk(DBGLVL_BUS, " .seqno            = %d\n",   m->seqno);
+	if (buf)
+		dprintk(DBGLVL_BUS, " .buffer (ignored)\n");
+}
+
+/*
+ * Places a command or a response on the bus. The implementation does not
+ * know if it is a command or a response it just places the data on the
+ * bus depending on the bus information given in the struct tmComResBusInfo
+ * structure. If the command or response does not fit into the bus ring
+ * buffer it will be refused.
+ *
+ * Return Value:
+ *  SAA_OK     The function executed successfully.
+ *  < 0        One or more members are not initialized.
+ */
+int saa7164_bus_set(struct saa7164_dev *dev, struct tmComResInfo* msg,
+	void *buf)
+{
+	struct tmComResBusInfo *bus = &dev->bus;
+	u32 bytes_to_write, free_write_space, timeout, curr_srp, curr_swp;
+	u32 new_swp, space_rem;
+	int ret = SAA_ERR_BAD_PARAMETER;
+	u16 size;
+
+	if (!msg) {
+		printk(KERN_ERR "%s() !msg\n", __func__);
+		return SAA_ERR_BAD_PARAMETER;
+	}
+
+	dprintk(DBGLVL_BUS, "%s()\n", __func__);
+
+	saa7164_bus_verify(dev);
+
+	if (msg->size > dev->bus.m_wMaxReqSize) {
+		printk(KERN_ERR "%s() Exceeded dev->bus.m_wMaxReqSize\n",
+			__func__);
+		return SAA_ERR_BAD_PARAMETER;
+	}
+
+	if ((msg->size > 0) && (buf == NULL)) {
+		printk(KERN_ERR "%s() Missing message buffer\n", __func__);
+		return SAA_ERR_BAD_PARAMETER;
+	}
+
+	/* Lock the bus from any other access */
+	mutex_lock(&bus->lock);
+
+	bytes_to_write = sizeof(*msg) + msg->size;
+	free_write_space = 0;
+	timeout = SAA_BUS_TIMEOUT;
+	curr_srp = saa7164_readl(bus->m_dwSetReadPos);
+	curr_swp = saa7164_readl(bus->m_dwSetWritePos);
+
+	/* Deal with ring wrapping issues */
+	if (curr_srp > curr_swp)
+		/* Deal with the wrapped ring */
+		free_write_space = curr_srp - curr_swp;
+	else
+		/* The ring has not wrapped yet */
+		free_write_space = (curr_srp + bus->m_dwSizeSetRing) - curr_swp;
+
+	dprintk(DBGLVL_BUS, "%s() bytes_to_write = %d\n", __func__,
+		bytes_to_write);
+
+	dprintk(DBGLVL_BUS, "%s() free_write_space = %d\n", __func__,
+		free_write_space);
+
+	dprintk(DBGLVL_BUS, "%s() curr_srp = %x\n", __func__, curr_srp);
+	dprintk(DBGLVL_BUS, "%s() curr_swp = %x\n", __func__, curr_swp);
+
+	/* Process the msg and write the content onto the bus */
+	while (bytes_to_write >= free_write_space) {
+
+		if (timeout-- == 0) {
+			printk(KERN_ERR "%s() bus timeout\n", __func__);
+			ret = SAA_ERR_NO_RESOURCES;
+			goto out;
+		}
+
+		/* TODO: Review this delay, efficient? */
+		/* Wait, allowing the hardware fetch time */
+		mdelay(1);
+
+		/* Check the space usage again */
+		curr_srp = saa7164_readl(bus->m_dwSetReadPos);
+
+		/* Deal with ring wrapping issues */
+		if (curr_srp > curr_swp)
+			/* Deal with the wrapped ring */
+			free_write_space = curr_srp - curr_swp;
+		else
+			/* Read didn't wrap around the buffer */
+			free_write_space = (curr_srp + bus->m_dwSizeSetRing) -
+				curr_swp;
+
+	}
+
+	/* Calculate the new write position */
+	new_swp = curr_swp + bytes_to_write;
+
+	dprintk(DBGLVL_BUS, "%s() new_swp = %x\n", __func__, new_swp);
+	dprintk(DBGLVL_BUS, "%s() bus->m_dwSizeSetRing = %x\n", __func__,
+		bus->m_dwSizeSetRing);
+
+	/*
+	 * Make a copy of msg->size before it is converted to le16 since it is
+	 * used in the code below.
+	 */
+	size = msg->size;
+	/* Convert to le16/le32 */
+	msg->size = (__force u16)cpu_to_le16(msg->size);
+	msg->command = (__force u32)cpu_to_le32(msg->command);
+	msg->controlselector = (__force u16)cpu_to_le16(msg->controlselector);
+
+	/* Mental Note: line 462 tmmhComResBusPCIe.cpp */
+
+	/* Check if we're going to wrap again */
+	if (new_swp > bus->m_dwSizeSetRing) {
+
+		/* Ring wraps */
+		new_swp -= bus->m_dwSizeSetRing;
+
+		space_rem = bus->m_dwSizeSetRing - curr_swp;
+
+		dprintk(DBGLVL_BUS, "%s() space_rem = %x\n", __func__,
+			space_rem);
+
+		dprintk(DBGLVL_BUS, "%s() sizeof(*msg) = %d\n", __func__,
+			(u32)sizeof(*msg));
+
+		if (space_rem < sizeof(*msg)) {
+			dprintk(DBGLVL_BUS, "%s() tr4\n", __func__);
+
+			/* Split the msg into pieces as the ring wraps */
+			memcpy_toio(bus->m_pdwSetRing + curr_swp, msg, space_rem);
+			memcpy_toio(bus->m_pdwSetRing, (u8 *)msg + space_rem,
+				sizeof(*msg) - space_rem);
+
+			memcpy_toio(bus->m_pdwSetRing + sizeof(*msg) - space_rem,
+				buf, size);
+
+		} else if (space_rem == sizeof(*msg)) {
+			dprintk(DBGLVL_BUS, "%s() tr5\n", __func__);
+
+			/* Additional data at the beginning of the ring */
+			memcpy_toio(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg));
+			memcpy_toio(bus->m_pdwSetRing, buf, size);
+
+		} else {
+			/* Additional data wraps around the ring */
+			memcpy_toio(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg));
+			if (size > 0) {
+				memcpy_toio(bus->m_pdwSetRing + curr_swp +
+					sizeof(*msg), buf, space_rem -
+					sizeof(*msg));
+				memcpy_toio(bus->m_pdwSetRing, (u8 *)buf +
+					space_rem - sizeof(*msg),
+					bytes_to_write - space_rem);
+			}
+
+		}
+
+	} /* (new_swp > bus->m_dwSizeSetRing) */
+	else {
+		dprintk(DBGLVL_BUS, "%s() tr6\n", __func__);
+
+		/* The ring buffer doesn't wrap, two simple copies */
+		memcpy_toio(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg));
+		memcpy_toio(bus->m_pdwSetRing + curr_swp + sizeof(*msg), buf,
+			size);
+	}
+
+	dprintk(DBGLVL_BUS, "%s() new_swp = %x\n", __func__, new_swp);
+
+	/* Update the bus write position */
+	saa7164_writel(bus->m_dwSetWritePos, new_swp);
+
+	/* Convert back to cpu after writing the msg to the ringbuffer. */
+	msg->size = le16_to_cpu((__force __le16)msg->size);
+	msg->command = le32_to_cpu((__force __le32)msg->command);
+	msg->controlselector = le16_to_cpu((__force __le16)msg->controlselector);
+	ret = SAA_OK;
+
+out:
+	saa7164_bus_dump(dev);
+	mutex_unlock(&bus->lock);
+	saa7164_bus_verify(dev);
+	return ret;
+}
+
+/*
+ * Receive a command or a response from the bus. The implementation does not
+ * know if it is a command or a response it simply dequeues the data,
+ * depending on the bus information given in the struct tmComResBusInfo
+ * structure.
+ *
+ * Return Value:
+ *  0          The function executed successfully.
+ *  < 0        One or more members are not initialized.
+ */
+int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg,
+	void *buf, int peekonly)
+{
+	struct tmComResBusInfo *bus = &dev->bus;
+	u32 bytes_to_read, write_distance, curr_grp, curr_gwp,
+		new_grp, buf_size, space_rem;
+	struct tmComResInfo msg_tmp;
+	int ret = SAA_ERR_BAD_PARAMETER;
+
+	saa7164_bus_verify(dev);
+
+	if (msg == NULL)
+		return ret;
+
+	if (msg->size > dev->bus.m_wMaxReqSize) {
+		printk(KERN_ERR "%s() Exceeded dev->bus.m_wMaxReqSize\n",
+			__func__);
+		return ret;
+	}
+
+	if ((peekonly == 0) && (msg->size > 0) && (buf == NULL)) {
+		printk(KERN_ERR
+			"%s() Missing msg buf, size should be %d bytes\n",
+			__func__, msg->size);
+		return ret;
+	}
+
+	mutex_lock(&bus->lock);
+
+	/* Peek the bus to see if a msg exists, if it's not what we're expecting
+	 * then return cleanly else read the message from the bus.
+	 */
+	curr_gwp = saa7164_readl(bus->m_dwGetWritePos);
+	curr_grp = saa7164_readl(bus->m_dwGetReadPos);
+
+	if (curr_gwp == curr_grp) {
+		ret = SAA_ERR_EMPTY;
+		goto out;
+	}
+
+	bytes_to_read = sizeof(*msg);
+
+	/* Calculate write distance to current read position */
+	write_distance = 0;
+	if (curr_gwp >= curr_grp)
+		/* Write doesn't wrap around the ring */
+		write_distance = curr_gwp - curr_grp;
+	else
+		/* Write wraps around the ring */
+		write_distance = curr_gwp + bus->m_dwSizeGetRing - curr_grp;
+
+	if (bytes_to_read > write_distance) {
+		printk(KERN_ERR "%s() No message/response found\n", __func__);
+		ret = SAA_ERR_INVALID_COMMAND;
+		goto out;
+	}
+
+	/* Calculate the new read position */
+	new_grp = curr_grp + bytes_to_read;
+	if (new_grp > bus->m_dwSizeGetRing) {
+
+		/* Ring wraps */
+		new_grp -= bus->m_dwSizeGetRing;
+		space_rem = bus->m_dwSizeGetRing - curr_grp;
+
+		memcpy_fromio(&msg_tmp, bus->m_pdwGetRing + curr_grp, space_rem);
+		memcpy_fromio((u8 *)&msg_tmp + space_rem, bus->m_pdwGetRing,
+			bytes_to_read - space_rem);
+
+	} else {
+		/* No wrapping */
+		memcpy_fromio(&msg_tmp, bus->m_pdwGetRing + curr_grp, bytes_to_read);
+	}
+	/* Convert from little endian to CPU */
+	msg_tmp.size = le16_to_cpu((__force __le16)msg_tmp.size);
+	msg_tmp.command = le32_to_cpu((__force __le32)msg_tmp.command);
+	msg_tmp.controlselector = le16_to_cpu((__force __le16)msg_tmp.controlselector);
+	memcpy(msg, &msg_tmp, sizeof(*msg));
+
+	/* No need to update the read positions, because this was a peek */
+	/* If the caller specifically want to peek, return */
+	if (peekonly) {
+		goto peekout;
+	}
+
+	/* Check if the command/response matches what is expected */
+	if ((msg_tmp.id != msg->id) || (msg_tmp.command != msg->command) ||
+		(msg_tmp.controlselector != msg->controlselector) ||
+		(msg_tmp.seqno != msg->seqno) || (msg_tmp.size != msg->size)) {
+
+		printk(KERN_ERR "%s() Unexpected msg miss-match\n", __func__);
+		saa7164_bus_dumpmsg(dev, msg, buf);
+		saa7164_bus_dumpmsg(dev, &msg_tmp, NULL);
+		ret = SAA_ERR_INVALID_COMMAND;
+		goto out;
+	}
+
+	/* Get the actual command and response from the bus */
+	buf_size = msg->size;
+
+	bytes_to_read = sizeof(*msg) + msg->size;
+	/* Calculate write distance to current read position */
+	write_distance = 0;
+	if (curr_gwp >= curr_grp)
+		/* Write doesn't wrap around the ring */
+		write_distance = curr_gwp - curr_grp;
+	else
+		/* Write wraps around the ring */
+		write_distance = curr_gwp + bus->m_dwSizeGetRing - curr_grp;
+
+	if (bytes_to_read > write_distance) {
+		printk(KERN_ERR "%s() Invalid bus state, missing msg or mangled ring, faulty H/W / bad code?\n",
+		       __func__);
+		ret = SAA_ERR_INVALID_COMMAND;
+		goto out;
+	}
+
+	/* Calculate the new read position */
+	new_grp = curr_grp + bytes_to_read;
+	if (new_grp > bus->m_dwSizeGetRing) {
+
+		/* Ring wraps */
+		new_grp -= bus->m_dwSizeGetRing;
+		space_rem = bus->m_dwSizeGetRing - curr_grp;
+
+		if (space_rem < sizeof(*msg)) {
+			if (buf)
+				memcpy_fromio(buf, bus->m_pdwGetRing + sizeof(*msg) -
+					space_rem, buf_size);
+
+		} else if (space_rem == sizeof(*msg)) {
+			if (buf)
+				memcpy_fromio(buf, bus->m_pdwGetRing, buf_size);
+		} else {
+			/* Additional data wraps around the ring */
+			if (buf) {
+				memcpy_fromio(buf, bus->m_pdwGetRing + curr_grp +
+					sizeof(*msg), space_rem - sizeof(*msg));
+				memcpy_fromio(buf + space_rem - sizeof(*msg),
+					bus->m_pdwGetRing, bytes_to_read -
+					space_rem);
+			}
+
+		}
+
+	} else {
+		/* No wrapping */
+		if (buf)
+			memcpy_fromio(buf, bus->m_pdwGetRing + curr_grp + sizeof(*msg),
+				buf_size);
+	}
+
+	/* Update the read positions, adjusting the ring */
+	saa7164_writel(bus->m_dwGetReadPos, new_grp);
+
+peekout:
+	ret = SAA_OK;
+out:
+	mutex_unlock(&bus->lock);
+	saa7164_bus_verify(dev);
+	return ret;
+}
+

linux-7.2.3/drivers/media/pci/saa7164/saa7164-cards.c

@@ -0,0 +1,943 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "saa7164.h"
+
+/* The Bridge API needs to understand register widths (in bytes) for the
+ * attached I2C devices, so we can simplify the virtual i2c mechansms
+ * and keep the -i2c.c implementation clean.
+ */
+#define REGLEN_0bit	0
+#define REGLEN_8bit	1
+#define REGLEN_16bit	2
+
+struct saa7164_board saa7164_boards[] = {
+	[SAA7164_BOARD_UNKNOWN] = {
+		/* Bridge will not load any firmware, without knowing
+		 * the rev this would be fatal. */
+		.name		= "Unknown",
+	},
+	[SAA7164_BOARD_UNKNOWN_REV2] = {
+		/* Bridge will load the v2 f/w and dump descriptors */
+		/* Required during new board bringup */
+		.name		= "Generic Rev2",
+		.chiprev	= SAA7164_CHIP_REV2,
+	},
+	[SAA7164_BOARD_UNKNOWN_REV3] = {
+		/* Bridge will load the v2 f/w and dump descriptors */
+		/* Required during new board bringup */
+		.name		= "Generic Rev3",
+		.chiprev	= SAA7164_CHIP_REV3,
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x1d,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1b,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_2] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV2,
+		.unit		= {{
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_3] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV2,
+		.unit		= {{
+			.id		= 0x1d,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1b,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1c,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x1d,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1b,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1c,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2250] = {
+		.name		= "Hauppauge WinTV-HVR2250",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x22,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x07,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x08,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x20,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x23,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2250_2] = {
+		.name		= "Hauppauge WinTV-HVR2250",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x28,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x07,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x08,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x26,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x29,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2250_3] = {
+		.name		= "Hauppauge WinTV-HVR2250",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x26,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x07,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x08,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x22,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x27,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_5] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x23,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x21,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x22,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x25,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2255proto] = {
+		.name		= "Hauppauge WinTV-HVR2255(proto)",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x27,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "LGDT3306",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xb2 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x26,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "LGDT3306-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x1c >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2255] = {
+		.name		= "Hauppauge WinTV-HVR2255",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x28,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "LGDT3306-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xb2 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x25,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x27,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "LGDT3306-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x1c >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2205] = {
+		.name		= "Hauppauge WinTV-HVR2205",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x28,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "SI2168-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc8 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x25,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x27,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "SI2168-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xcc >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		} },
+	},
+};
+const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards);
+
+/* ------------------------------------------------------------------ */
+/* PCI subsystem IDs                                                  */
+
+struct saa7164_subid saa7164_subids[] = {
+	{
+		.subvendor = 0x0070,
+		.subdevice = 0x8880,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8810,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8980,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8900,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8901,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_3,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x88A1,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_3,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8891,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8851,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8940,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_4,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8953,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_5,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xf111,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2255,
+		/* Prototype card left here for documentation purposes.
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2255proto,
+		*/
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xf123,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2205,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xf120,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2205,
+	},
+};
+const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
+
+void saa7164_card_list(struct saa7164_dev *dev)
+{
+	int i;
+
+	if (0 == dev->pci->subsystem_vendor &&
+	    0 == dev->pci->subsystem_device) {
+		printk(KERN_ERR
+			"%s: Board has no valid PCIe Subsystem ID and can't\n"
+			"%s: be autodetected. Pass card=<n> insmod option to\n"
+			"%s: workaround that. Send complaints to the vendor\n"
+			"%s: of the TV card. Best regards,\n"
+			"%s:         -- tux\n",
+			dev->name, dev->name, dev->name, dev->name, dev->name);
+	} else {
+		printk(KERN_ERR
+			"%s: Your board isn't known (yet) to the driver.\n"
+			"%s: Try to pick one of the existing card configs via\n"
+			"%s: card=<n> insmod option.  Updating to the latest\n"
+			"%s: version might help as well.\n",
+			dev->name, dev->name, dev->name, dev->name);
+	}
+
+	printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod option:\n",
+	       dev->name);
+
+	for (i = 0; i < saa7164_bcount; i++)
+		printk(KERN_ERR "%s:    card=%d -> %s\n",
+		       dev->name, i, saa7164_boards[i].name);
+}
+
+/* TODO: clean this define up into the -cards.c structs */
+#define PCIEBRIDGE_UNITID 2
+
+void saa7164_gpio_setup(struct saa7164_dev *dev)
+{
+	switch (dev->board) {
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255proto:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2205:
+		/*
+		HVR2200 / HVR2250
+		GPIO 2: s5h1411 / tda10048-1 demod reset
+		GPIO 3: s5h1411 / tda10048-2 demod reset
+		GPIO 7: IRBlaster Zilog reset
+		 */
+
+		/* HVR2255
+		 * GPIO 2: lgdg3306-1 demod reset
+		 * GPIO 3: lgdt3306-2 demod reset
+		 */
+
+		/* HVR2205
+		 * GPIO 2: si2168-1 demod reset
+		 * GPIO 3: si2168-2 demod reset
+		 */
+
+		/* Reset parts by going in and out of reset */
+		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
+		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
+
+		msleep(20);
+
+		saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
+		saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
+		break;
+	}
+}
+
+static void hauppauge_eeprom(struct saa7164_dev *dev, u8 *eeprom_data)
+{
+	struct tveeprom tv;
+
+	tveeprom_hauppauge_analog(&tv, eeprom_data);
+
+	/* Make sure we support the board model */
+	switch (tv.model) {
+	case 88001:
+		/* Development board - Limit circulation */
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */
+	case 88021:
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, MCE CIR, FM */
+		break;
+	case 88041:
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */
+		break;
+	case 88061:
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, FM */
+		break;
+	case 89519:
+	case 89609:
+		/* WinTV-HVR2200 (PCIe, Retail, full-height)
+		 * DVB-T (TDA18271/TDA10048) and basic analog, no IR */
+		break;
+	case 89619:
+		/* WinTV-HVR2200 (PCIe, Retail, half-height)
+		 * DVB-T (TDA18271/TDA10048) and basic analog, no IR */
+		break;
+	case 151009:
+		/* First production board rev B2I6 */
+		/* WinTV-HVR2205 (PCIe, Retail, full-height bracket)
+		 * DVB-T/T2/C (SI2157/SI2168) and basic analog, FM */
+		break;
+	case 151609:
+		/* First production board rev B2I6 */
+		/* WinTV-HVR2205 (PCIe, Retail, half-height bracket)
+		 * DVB-T/T2/C (SI2157/SI2168) and basic analog, FM */
+		break;
+	case 151061:
+		/* First production board rev B1I6 */
+		/* WinTV-HVR2255 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (SI2157/LGDT3306) and basic analog, FM */
+		break;
+	default:
+		printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n",
+			dev->name, tv.model);
+		break;
+	}
+
+	printk(KERN_INFO "%s: Hauppauge eeprom: model=%d\n", dev->name,
+		tv.model);
+}
+
+void saa7164_card_setup(struct saa7164_dev *dev)
+{
+	static u8 eeprom[256];
+
+	if (dev->i2c_bus[0].i2c_rc == 0) {
+		if (saa7164_api_read_eeprom(dev, &eeprom[0],
+			sizeof(eeprom)) < 0)
+			return;
+	}
+
+	switch (dev->board) {
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255proto:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2205:
+		hauppauge_eeprom(dev, &eeprom[0]);
+		break;
+	}
+}
+
+/* With most other drivers, the kernel expects to communicate with subdrivers
+ * through i2c. This bridge does not allow that, it does not expose any direct
+ * access to I2C. Instead we have to communicate through the device f/w for
+ * register access to 'processing units'. Each unit has a unique
+ * id, regardless of how the physical implementation occurs across
+ * the three physical i2c buses. The being said if we want leverge of
+ * the existing kernel drivers for tuners and demods we have to 'speak i2c',
+ * to this bridge implements 3 virtual i2c buses. This is a helper function
+ * for those.
+ *
+ * Description: Translate the kernels notion of an i2c address and bus into
+ * the appropriate unitid.
+ */
+int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr)
+{
+	/* For a given bus and i2c device address, return the saa7164 unique
+	 * unitid. < 0 on error */
+
+	struct saa7164_dev *dev = bus->dev;
+	struct saa7164_unit *unit;
+	int i;
+
+	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
+		unit = &saa7164_boards[dev->board].unit[i];
+
+		if (unit->type == SAA7164_UNIT_UNDEFINED)
+			continue;
+		if ((bus->nr == unit->i2c_bus_nr) &&
+			(addr == unit->i2c_bus_addr))
+			return unit->id;
+	}
+
+	return -1;
+}
+
+/* The 7164 API needs to know the i2c register length in advance.
+ * this is a helper function. Based on a specific chip addr and bus return the
+ * reg length.
+ */
+int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr)
+{
+	/* For a given bus and i2c device address, return the
+	 * saa7164 registry address width. < 0 on error
+	 */
+
+	struct saa7164_dev *dev = bus->dev;
+	struct saa7164_unit *unit;
+	int i;
+
+	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
+		unit = &saa7164_boards[dev->board].unit[i];
+
+		if (unit->type == SAA7164_UNIT_UNDEFINED)
+			continue;
+
+		if ((bus->nr == unit->i2c_bus_nr) &&
+			(addr == unit->i2c_bus_addr))
+			return unit->i2c_reg_len;
+	}
+
+	return -1;
+}
+/* TODO: implement a 'findeeprom' functio like the above and fix any other
+ * eeprom related todo's in -api.c.
+ */
+
+/* Translate a unitid into a x readable device name, for display purposes.  */
+char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid)
+{
+	char *undefed = "UNDEFINED";
+	char *bridge = "BRIDGE";
+	struct saa7164_unit *unit;
+	int i;
+
+	if (unitid == 0)
+		return bridge;
+
+	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
+		unit = &saa7164_boards[dev->board].unit[i];
+
+		if (unit->type == SAA7164_UNIT_UNDEFINED)
+			continue;
+
+		if (unitid == unit->id)
+				return unit->name;
+	}
+
+	return undefed;
+}
+

linux-7.2.3/drivers/media/pci/saa7164/saa7164-cmd.c

@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
+ */
+
+#include <linux/wait.h>
+
+#include "saa7164.h"
+
+static int saa7164_cmd_alloc_seqno(struct saa7164_dev *dev)
+{
+	int i, ret = -1;
+
+	mutex_lock(&dev->lock);
+	for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) {
+		if (dev->cmds[i].inuse == 0) {
+			dev->cmds[i].inuse = 1;
+			dev->cmds[i].signalled = 0;
+			dev->cmds[i].timeout = 0;
+			ret = dev->cmds[i].seqno;
+			break;
+		}
+	}
+	mutex_unlock(&dev->lock);
+
+	return ret;
+}
+
+static void saa7164_cmd_free_seqno(struct saa7164_dev *dev, u8 seqno)
+{
+	mutex_lock(&dev->lock);
+	if ((dev->cmds[seqno].inuse == 1) &&
+		(dev->cmds[seqno].seqno == seqno)) {
+		dev->cmds[seqno].inuse = 0;
+		dev->cmds[seqno].signalled = 0;
+		dev->cmds[seqno].timeout = 0;
+	}
+	mutex_unlock(&dev->lock);
+}
+
+static void saa7164_cmd_timeout_seqno(struct saa7164_dev *dev, u8 seqno)
+{
+	mutex_lock(&dev->lock);
+	if ((dev->cmds[seqno].inuse == 1) &&
+		(dev->cmds[seqno].seqno == seqno)) {
+		dev->cmds[seqno].timeout = 1;
+	}
+	mutex_unlock(&dev->lock);
+}
+
+static u32 saa7164_cmd_timeout_get(struct saa7164_dev *dev, u8 seqno)
+{
+	int ret = 0;
+
+	mutex_lock(&dev->lock);
+	if ((dev->cmds[seqno].inuse == 1) &&
+		(dev->cmds[seqno].seqno == seqno)) {
+		ret = dev->cmds[seqno].timeout;
+	}
+	mutex_unlock(&dev->lock);
+
+	return ret;
+}
+
+/* Commands to the f/w get marshelled to/from this code then onto the PCI
+ * -bus/c running buffer. */
+int saa7164_irq_dequeue(struct saa7164_dev *dev)
+{
+	int ret = SAA_OK, i = 0;
+	u32 timeout;
+	wait_queue_head_t *q = NULL;
+	u8 tmp[512];
+	dprintk(DBGLVL_CMD, "%s()\n", __func__);
+
+	/* While any outstand message on the bus exists... */
+	do {
+
+		/* Peek the msg bus */
+		struct tmComResInfo tRsp = { 0, 0, 0, 0, 0, 0 };
+		ret = saa7164_bus_get(dev, &tRsp, NULL, 1);
+		if (ret != SAA_OK)
+			break;
+
+		q = &dev->cmds[tRsp.seqno].wait;
+		timeout = saa7164_cmd_timeout_get(dev, tRsp.seqno);
+		dprintk(DBGLVL_CMD, "%s() timeout = %d\n", __func__, timeout);
+		if (!timeout) {
+			dprintk(DBGLVL_CMD,
+				"%s() signalled seqno(%d) (for dequeue)\n",
+				__func__, tRsp.seqno);
+			dev->cmds[tRsp.seqno].signalled = 1;
+			wake_up(q);
+		} else {
+			printk(KERN_ERR
+				"%s() found timed out command on the bus\n",
+					__func__);
+
+			/* Clean the bus */
+			ret = saa7164_bus_get(dev, &tRsp, &tmp, 0);
+			printk(KERN_ERR "%s() ret = %x\n", __func__, ret);
+			if (ret == SAA_ERR_EMPTY)
+				/* Someone else already fetched the response */
+				return SAA_OK;
+
+			if (ret != SAA_OK)
+				return ret;
+		}
+
+		/* It's unlikely to have more than 4 or 5 pending messages,
+		 * ensure we exit at some point regardless.
+		 */
+	} while (i++ < 32);
+
+	return ret;
+}
+
+/* Commands to the f/w get marshelled to/from this code then onto the PCI
+ * -bus/c running buffer. */
+static int saa7164_cmd_dequeue(struct saa7164_dev *dev)
+{
+	int ret;
+	u32 timeout;
+	wait_queue_head_t *q = NULL;
+	u8 tmp[512];
+	dprintk(DBGLVL_CMD, "%s()\n", __func__);
+
+	while (true) {
+
+		struct tmComResInfo tRsp = { 0, 0, 0, 0, 0, 0 };
+		ret = saa7164_bus_get(dev, &tRsp, NULL, 1);
+		if (ret == SAA_ERR_EMPTY)
+			return SAA_OK;
+
+		if (ret != SAA_OK)
+			return ret;
+
+		q = &dev->cmds[tRsp.seqno].wait;
+		timeout = saa7164_cmd_timeout_get(dev, tRsp.seqno);
+		dprintk(DBGLVL_CMD, "%s() timeout = %d\n", __func__, timeout);
+		if (timeout) {
+			printk(KERN_ERR "found timed out command on the bus\n");
+
+			/* Clean the bus */
+			ret = saa7164_bus_get(dev, &tRsp, &tmp, 0);
+			printk(KERN_ERR "ret = %x\n", ret);
+			if (ret == SAA_ERR_EMPTY)
+				/* Someone else already fetched the response */
+				return SAA_OK;
+
+			if (ret != SAA_OK)
+				return ret;
+
+			if (tRsp.flags & PVC_CMDFLAG_CONTINUE)
+				printk(KERN_ERR "split response\n");
+			else
+				saa7164_cmd_free_seqno(dev, tRsp.seqno);
+
+			printk(KERN_ERR " timeout continue\n");
+			continue;
+		}
+
+		dprintk(DBGLVL_CMD, "%s() signalled seqno(%d) (for dequeue)\n",
+			__func__, tRsp.seqno);
+		dev->cmds[tRsp.seqno].signalled = 1;
+		wake_up(q);
+		return SAA_OK;
+	}
+}
+
+static int saa7164_cmd_set(struct saa7164_dev *dev, struct tmComResInfo *msg,
+			   void *buf)
+{
+	struct tmComResBusInfo *bus = &dev->bus;
+	u8 cmd_sent;
+	u16 size, idx;
+	u32 cmds;
+	void *tmp;
+	int ret = -1;
+
+	if (!msg) {
+		printk(KERN_ERR "%s() !msg\n", __func__);
+		return SAA_ERR_BAD_PARAMETER;
+	}
+
+	mutex_lock(&dev->cmds[msg->id].lock);
+
+	size = msg->size;
+	cmds = size / bus->m_wMaxReqSize;
+	if (size % bus->m_wMaxReqSize == 0)
+		cmds -= 1;
+
+	cmd_sent = 0;
+
+	/* Split the request into smaller chunks */
+	for (idx = 0; idx < cmds; idx++) {
+
+		msg->flags |= SAA_CMDFLAG_CONTINUE;
+		msg->size = bus->m_wMaxReqSize;
+		tmp = buf + idx * bus->m_wMaxReqSize;
+
+		ret = saa7164_bus_set(dev, msg, tmp);
+		if (ret != SAA_OK) {
+			printk(KERN_ERR "%s() set failed %d\n", __func__, ret);
+
+			if (cmd_sent) {
+				ret = SAA_ERR_BUSY;
+				goto out;
+			}
+			ret = SAA_ERR_OVERFLOW;
+			goto out;
+		}
+		cmd_sent = 1;
+	}
+
+	/* If not the last command... */
+	if (idx != 0)
+		msg->flags &= ~SAA_CMDFLAG_CONTINUE;
+
+	msg->size = size - idx * bus->m_wMaxReqSize;
+
+	ret = saa7164_bus_set(dev, msg, buf + idx * bus->m_wMaxReqSize);
+	if (ret != SAA_OK) {
+		printk(KERN_ERR "%s() set last failed %d\n", __func__, ret);
+
+		if (cmd_sent) {
+			ret = SAA_ERR_BUSY;
+			goto out;
+		}
+		ret = SAA_ERR_OVERFLOW;
+		goto out;
+	}
+	ret = SAA_OK;
+
+out:
+	mutex_unlock(&dev->cmds[msg->id].lock);
+	return ret;
+}
+
+/* Wait for a signal event, without holding a mutex. Either return TIMEOUT if
+ * the event never occurred, or SAA_OK if it was signaled during the wait.
+ */
+static int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
+{
+	wait_queue_head_t *q = NULL;
+	int ret = SAA_BUS_TIMEOUT;
+	unsigned long stamp;
+	int r;
+
+	if (saa_debug >= 4)
+		saa7164_bus_dump(dev);
+
+	dprintk(DBGLVL_CMD, "%s(seqno=%d)\n", __func__, seqno);
+
+	mutex_lock(&dev->lock);
+	if ((dev->cmds[seqno].inuse == 1) &&
+		(dev->cmds[seqno].seqno == seqno)) {
+		q = &dev->cmds[seqno].wait;
+	}
+	mutex_unlock(&dev->lock);
+
+	if (q) {
+		/* If we haven't been signalled we need to wait */
+		if (dev->cmds[seqno].signalled == 0) {
+			stamp = jiffies;
+			dprintk(DBGLVL_CMD,
+				"%s(seqno=%d) Waiting (signalled=%d)\n",
+				__func__, seqno, dev->cmds[seqno].signalled);
+
+			/* Wait for signalled to be flagged or timeout */
+			/* In a highly stressed system this can easily extend
+			 * into multiple seconds before the deferred worker
+			 * is scheduled, and we're woken up via signal.
+			 * We typically are signalled in < 50ms but it can
+			 * take MUCH longer.
+			 */
+			wait_event_timeout(*q, dev->cmds[seqno].signalled,
+				(HZ * waitsecs));
+			r = time_before(jiffies, stamp + (HZ * waitsecs));
+			if (r)
+				ret = SAA_OK;
+			else
+				saa7164_cmd_timeout_seqno(dev, seqno);
+
+			dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d (signalled=%d)\n",
+				__func__, seqno, r,
+				dev->cmds[seqno].signalled);
+		} else
+			ret = SAA_OK;
+	} else
+		printk(KERN_ERR "%s(seqno=%d) seqno is invalid\n",
+			__func__, seqno);
+
+	return ret;
+}
+
+int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, enum tmComResCmd command,
+	u16 controlselector, u16 size, void *buf)
+{
+	struct tmComResInfo command_t, *pcommand_t;
+	struct tmComResInfo response_t, *presponse_t;
+	u8 errdata[256];
+	u16 resp_dsize;
+	u16 data_recd;
+	u32 loop;
+	int ret;
+	int safety = 0;
+
+	dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, sel = 0x%x)\n",
+		__func__, saa7164_unitid_name(dev, id), id,
+		command, controlselector);
+
+	if ((size == 0) || (buf == NULL)) {
+		printk(KERN_ERR "%s() Invalid param\n", __func__);
+		return SAA_ERR_BAD_PARAMETER;
+	}
+
+	/* Prepare some basic command/response structures */
+	memset(&command_t, 0, sizeof(command_t));
+	memset(&response_t, 0, sizeof(response_t));
+	pcommand_t = &command_t;
+	presponse_t = &response_t;
+	command_t.id = id;
+	command_t.command = command;
+	command_t.controlselector = controlselector;
+	command_t.size = size;
+
+	/* Allocate a unique sequence number */
+	ret = saa7164_cmd_alloc_seqno(dev);
+	if (ret < 0) {
+		printk(KERN_ERR "%s() No free sequences\n", __func__);
+		ret = SAA_ERR_NO_RESOURCES;
+		goto out;
+	}
+
+	command_t.seqno = (u8)ret;
+
+	/* Send Command */
+	resp_dsize = size;
+	pcommand_t->size = size;
+
+	dprintk(DBGLVL_CMD, "%s() pcommand_t.seqno = %d\n",
+		__func__, pcommand_t->seqno);
+
+	dprintk(DBGLVL_CMD, "%s() pcommand_t.size = %d\n",
+		__func__, pcommand_t->size);
+
+	ret = saa7164_cmd_set(dev, pcommand_t, buf);
+	if (ret != SAA_OK) {
+		printk(KERN_ERR "%s() set command failed %d\n", __func__, ret);
+
+		if (ret != SAA_ERR_BUSY)
+			saa7164_cmd_free_seqno(dev, pcommand_t->seqno);
+		else
+			/* Flag a timeout, because at least one
+			 * command was sent */
+			saa7164_cmd_timeout_seqno(dev, pcommand_t->seqno);
+
+		goto out;
+	}
+
+	/* With split responses we have to collect the msgs piece by piece */
+	data_recd = 0;
+	loop = 1;
+	while (loop) {
+		dprintk(DBGLVL_CMD, "%s() loop\n", __func__);
+
+		ret = saa7164_cmd_wait(dev, pcommand_t->seqno);
+		dprintk(DBGLVL_CMD, "%s() loop ret = %d\n", __func__, ret);
+
+		/* if power is down and this is not a power command ... */
+
+		if (ret == SAA_BUS_TIMEOUT) {
+			printk(KERN_ERR "Event timed out\n");
+			saa7164_cmd_timeout_seqno(dev, pcommand_t->seqno);
+			return ret;
+		}
+
+		if (ret != SAA_OK) {
+			printk(KERN_ERR "spurious error\n");
+			return ret;
+		}
+
+		/* Peek response */
+		ret = saa7164_bus_get(dev, presponse_t, NULL, 1);
+		if (ret == SAA_ERR_EMPTY) {
+			dprintk(4, "%s() SAA_ERR_EMPTY\n", __func__);
+			continue;
+		}
+		if (ret != SAA_OK) {
+			printk(KERN_ERR "peek failed\n");
+			return ret;
+		}
+
+		dprintk(DBGLVL_CMD, "%s() presponse_t->seqno = %d\n",
+			__func__, presponse_t->seqno);
+
+		dprintk(DBGLVL_CMD, "%s() presponse_t->flags = 0x%x\n",
+			__func__, presponse_t->flags);
+
+		dprintk(DBGLVL_CMD, "%s() presponse_t->size = %d\n",
+			__func__, presponse_t->size);
+
+		/* Check if the response was for our command */
+		if (presponse_t->seqno != pcommand_t->seqno) {
+
+			dprintk(DBGLVL_CMD,
+				"wrong event: seqno = %d, expected seqno = %d, will dequeue regardless\n",
+				presponse_t->seqno, pcommand_t->seqno);
+
+			ret = saa7164_cmd_dequeue(dev);
+			if (ret != SAA_OK) {
+				printk(KERN_ERR "dequeue failed, ret = %d\n",
+					ret);
+				if (safety++ > 16) {
+					printk(KERN_ERR
+					"dequeue exceeded, safety exit\n");
+					return SAA_ERR_BUSY;
+				}
+			}
+
+			continue;
+		}
+
+		if ((presponse_t->flags & PVC_RESPONSEFLAG_ERROR) != 0) {
+
+			memset(&errdata[0], 0, sizeof(errdata));
+
+			ret = saa7164_bus_get(dev, presponse_t, &errdata[0], 0);
+			if (ret != SAA_OK) {
+				printk(KERN_ERR "get error(2)\n");
+				return ret;
+			}
+
+			saa7164_cmd_free_seqno(dev, pcommand_t->seqno);
+
+			dprintk(DBGLVL_CMD, "%s() errdata %02x%02x%02x%02x\n",
+				__func__, errdata[0], errdata[1], errdata[2],
+				errdata[3]);
+
+			/* Map error codes */
+			dprintk(DBGLVL_CMD, "%s() cmd, error code  = 0x%x\n",
+				__func__, errdata[0]);
+
+			switch (errdata[0]) {
+			case PVC_ERRORCODE_INVALID_COMMAND:
+				dprintk(DBGLVL_CMD, "%s() INVALID_COMMAND\n",
+					__func__);
+				ret = SAA_ERR_INVALID_COMMAND;
+				break;
+			case PVC_ERRORCODE_INVALID_DATA:
+				dprintk(DBGLVL_CMD, "%s() INVALID_DATA\n",
+					__func__);
+				ret = SAA_ERR_BAD_PARAMETER;
+				break;
+			case PVC_ERRORCODE_TIMEOUT:
+				dprintk(DBGLVL_CMD, "%s() TIMEOUT\n", __func__);
+				ret = SAA_ERR_TIMEOUT;
+				break;
+			case PVC_ERRORCODE_NAK:
+				dprintk(DBGLVL_CMD, "%s() NAK\n", __func__);
+				ret = SAA_ERR_NULL_PACKET;
+				break;
+			case PVC_ERRORCODE_UNKNOWN:
+			case PVC_ERRORCODE_INVALID_CONTROL:
+				dprintk(DBGLVL_CMD,
+					"%s() UNKNOWN OR INVALID CONTROL\n",
+					__func__);
+				ret = SAA_ERR_NOT_SUPPORTED;
+				break;
+			default:
+				dprintk(DBGLVL_CMD, "%s() UNKNOWN\n", __func__);
+				ret = SAA_ERR_NOT_SUPPORTED;
+			}
+
+			/* See of other commands are on the bus */
+			if (saa7164_cmd_dequeue(dev) != SAA_OK)
+				printk(KERN_ERR "dequeue(2) failed\n");
+
+			return ret;
+		}
+
+		/* If response is invalid */
+		if ((presponse_t->id != pcommand_t->id) ||
+			(presponse_t->command != pcommand_t->command) ||
+			(presponse_t->controlselector !=
+				pcommand_t->controlselector) ||
+			(((resp_dsize - data_recd) != presponse_t->size) &&
+				!(presponse_t->flags & PVC_CMDFLAG_CONTINUE)) ||
+			((resp_dsize - data_recd) < presponse_t->size)) {
+
+			/* Invalid */
+			dprintk(DBGLVL_CMD, "%s() Invalid\n", __func__);
+			ret = saa7164_bus_get(dev, presponse_t, NULL, 0);
+			if (ret != SAA_OK) {
+				printk(KERN_ERR "get failed\n");
+				return ret;
+			}
+
+			/* See of other commands are on the bus */
+			if (saa7164_cmd_dequeue(dev) != SAA_OK)
+				printk(KERN_ERR "dequeue(3) failed\n");
+			continue;
+		}
+
+		/* OK, now we're actually getting out correct response */
+		ret = saa7164_bus_get(dev, presponse_t, buf + data_recd, 0);
+		if (ret != SAA_OK) {
+			printk(KERN_ERR "get failed\n");
+			return ret;
+		}
+
+		data_recd = presponse_t->size + data_recd;
+		if (resp_dsize == data_recd) {
+			dprintk(DBGLVL_CMD, "%s() Resp recd\n", __func__);
+			break;
+		}
+
+		/* See of other commands are on the bus */
+		if (saa7164_cmd_dequeue(dev) != SAA_OK)
+			printk(KERN_ERR "dequeue(3) failed\n");
+	} /* (loop) */
+
+	/* Release the sequence number allocation */
+	saa7164_cmd_free_seqno(dev, pcommand_t->seqno);
+
+	/* if powerdown signal all pending commands */
+
+	dprintk(DBGLVL_CMD, "%s() Calling dequeue then exit\n", __func__);
+
+	/* See of other commands are on the bus */
+	if (saa7164_cmd_dequeue(dev) != SAA_OK)
+		printk(KERN_ERR "dequeue(4) failed\n");
+
+	ret = SAA_OK;
+out:
+	return ret;
+}
+

linux-7.2.3/drivers/media/pci/saa7164/saa7164-dvb.c

@@ -0,0 +1,740 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
+ */
+
+#include "saa7164.h"
+
+#include "tda10048.h"
+#include "tda18271.h"
+#include "s5h1411.h"
+#include "si2157.h"
+#include "si2168.h"
+#include "lgdt3306a.h"
+
+#define DRIVER_NAME "saa7164"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+/* addr is in the card struct, get it from there */
+static struct tda10048_config hauppauge_hvr2200_1_config = {
+	.demod_address    = 0x10 >> 1,
+	.output_mode      = TDA10048_SERIAL_OUTPUT,
+	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
+	.inversion        = TDA10048_INVERSION_ON,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3500,
+	.dtv8_if_freq_khz = TDA10048_IF_4000,
+	.clk_freq_khz     = TDA10048_CLK_16000,
+};
+static struct tda10048_config hauppauge_hvr2200_2_config = {
+	.demod_address    = 0x12 >> 1,
+	.output_mode      = TDA10048_SERIAL_OUTPUT,
+	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
+	.inversion        = TDA10048_INVERSION_ON,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3500,
+	.dtv8_if_freq_khz = TDA10048_IF_4000,
+	.clk_freq_khz     = TDA10048_CLK_16000,
+};
+
+static struct tda18271_std_map hauppauge_tda18271_std_map = {
+	.atsc_6   = { .if_freq = 3250, .agc_mode = 3, .std = 3,
+		      .if_lvl = 6, .rfagc_top = 0x37 },
+	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 0,
+		      .if_lvl = 6, .rfagc_top = 0x37 },
+};
+
+static struct tda18271_config hauppauge_hvr22x0_tuner_config = {
+	.std_map	= &hauppauge_tda18271_std_map,
+	.gate		= TDA18271_GATE_ANALOG,
+	.role		= TDA18271_MASTER,
+};
+
+static struct tda18271_config hauppauge_hvr22x0s_tuner_config = {
+	.std_map	= &hauppauge_tda18271_std_map,
+	.gate		= TDA18271_GATE_ANALOG,
+	.role		= TDA18271_SLAVE,
+	.output_opt     = TDA18271_OUTPUT_LT_OFF,
+	.rf_cal_on_startup = 1
+};
+
+static struct s5h1411_config hauppauge_s5h1411_config = {
+	.output_mode   = S5H1411_SERIAL_OUTPUT,
+	.gpio          = S5H1411_GPIO_ON,
+	.qam_if        = S5H1411_IF_4000,
+	.vsb_if        = S5H1411_IF_3250,
+	.inversion     = S5H1411_INVERSION_ON,
+	.status_mode   = S5H1411_DEMODLOCKING,
+	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static struct lgdt3306a_config hauppauge_hvr2255a_config = {
+	.i2c_addr               = 0xb2 >> 1,
+	.qam_if_khz             = 4000,
+	.vsb_if_khz             = 3250,
+	.deny_i2c_rptr          = 1, /* Disabled */
+	.spectral_inversion     = 0, /* Disabled */
+	.mpeg_mode              = LGDT3306A_MPEG_SERIAL,
+	.tpclk_edge             = LGDT3306A_TPCLK_RISING_EDGE,
+	.tpvalid_polarity       = LGDT3306A_TP_VALID_HIGH,
+	.xtalMHz                = 25, /* 24 or 25 */
+};
+
+static struct lgdt3306a_config hauppauge_hvr2255b_config = {
+	.i2c_addr               = 0x1c >> 1,
+	.qam_if_khz             = 4000,
+	.vsb_if_khz             = 3250,
+	.deny_i2c_rptr          = 1, /* Disabled */
+	.spectral_inversion     = 0, /* Disabled */
+	.mpeg_mode              = LGDT3306A_MPEG_SERIAL,
+	.tpclk_edge             = LGDT3306A_TPCLK_RISING_EDGE,
+	.tpvalid_polarity       = LGDT3306A_TP_VALID_HIGH,
+	.xtalMHz                = 25, /* 24 or 25 */
+};
+
+static struct si2157_config hauppauge_hvr2255_tuner_config = {
+	.inversion = 1,
+	.if_port = 1,
+};
+
+static int si2157_attach(struct saa7164_port *port, struct i2c_adapter *adapter,
+	struct dvb_frontend *fe, u8 addr8bit, struct si2157_config *cfg)
+{
+	struct i2c_board_info bi;
+	struct i2c_client *tuner;
+
+	cfg->fe = fe;
+
+	memset(&bi, 0, sizeof(bi));
+
+	strscpy(bi.type, "si2157", I2C_NAME_SIZE);
+	bi.platform_data = cfg;
+	bi.addr = addr8bit >> 1;
+
+	request_module(bi.type);
+
+	tuner = i2c_new_client_device(adapter, &bi);
+	if (!i2c_client_has_driver(tuner))
+		return -ENODEV;
+
+	if (!try_module_get(tuner->dev.driver->owner)) {
+		i2c_unregister_device(tuner);
+		return -ENODEV;
+	}
+
+	port->i2c_client_tuner = tuner;
+
+	return 0;
+}
+
+static int saa7164_dvb_stop_port(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	int ret;
+
+	ret = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
+	if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n",
+			__func__, ret);
+		ret = -EIO;
+	} else {
+		dprintk(DBGLVL_DVB, "%s()    Stopped\n", __func__);
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int saa7164_dvb_acquire_port(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	int ret;
+
+	ret = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE);
+	if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n",
+			__func__, ret);
+		ret = -EIO;
+	} else {
+		dprintk(DBGLVL_DVB, "%s() Acquired\n", __func__);
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int saa7164_dvb_pause_port(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	int ret;
+
+	ret = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE);
+	if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n",
+			__func__, ret);
+		ret = -EIO;
+	} else {
+		dprintk(DBGLVL_DVB, "%s()   Paused\n", __func__);
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* Firmware is very windows centric, meaning you have to transition
+ * the part through AVStream / KS Windows stages, forwards or backwards.
+ * States are: stopped, acquired (h/w), paused, started.
+ */
+static int saa7164_dvb_stop_streaming(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	struct saa7164_buffer *buf;
+	struct list_head *p, *q;
+	int ret;
+
+	dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr);
+
+	ret = saa7164_dvb_pause_port(port);
+	ret = saa7164_dvb_acquire_port(port);
+	ret = saa7164_dvb_stop_port(port);
+
+	/* Mark the hardware buffers as free */
+	mutex_lock(&port->dmaqueue_lock);
+	list_for_each_safe(p, q, &port->dmaqueue.list) {
+		buf = list_entry(p, struct saa7164_buffer, list);
+		buf->flags = SAA7164_BUFFER_FREE;
+	}
+	mutex_unlock(&port->dmaqueue_lock);
+
+	return ret;
+}
+
+static int saa7164_dvb_start_port(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	int ret = 0, result;
+
+	dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr);
+
+	saa7164_buffer_cfg_port(port);
+
+	/* Acquire the hardware */
+	result = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE);
+	if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n",
+			__func__, result);
+
+		/* Stop the hardware, regardless */
+		result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
+		if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+			printk(KERN_ERR "%s() acquire/forced stop transition failed, res = 0x%x\n",
+			       __func__, result);
+		}
+		ret = -EIO;
+		goto out;
+	} else
+		dprintk(DBGLVL_DVB, "%s()   Acquired\n", __func__);
+
+	/* Pause the hardware */
+	result = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE);
+	if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n",
+				__func__, result);
+
+		/* Stop the hardware, regardless */
+		result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
+		if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+			printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n",
+			       __func__, result);
+		}
+
+		ret = -EIO;
+		goto out;
+	} else
+		dprintk(DBGLVL_DVB, "%s()   Paused\n", __func__);
+
+	/* Start the hardware */
+	result = saa7164_api_transition_port(port, SAA_DMASTATE_RUN);
+	if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() run transition failed, result = 0x%x\n",
+				__func__, result);
+
+		/* Stop the hardware, regardless */
+		result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
+		if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+			printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n",
+			       __func__, result);
+		}
+
+		ret = -EIO;
+	} else
+		dprintk(DBGLVL_DVB, "%s()   Running\n", __func__);
+
+out:
+	return ret;
+}
+
+static int saa7164_dvb_start_feed(struct dvb_demux_feed *feed)
+{
+	struct dvb_demux *demux = feed->demux;
+	struct saa7164_port *port = demux->priv;
+	struct saa7164_dvb *dvb = &port->dvb;
+	struct saa7164_dev *dev = port->dev;
+	int ret = 0;
+
+	dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr);
+
+	if (!demux->dmx.frontend)
+		return -EINVAL;
+
+	if (dvb) {
+		mutex_lock(&dvb->lock);
+		if (dvb->feeding++ == 0) {
+			/* Start transport */
+			ret = saa7164_dvb_start_port(port);
+		}
+		mutex_unlock(&dvb->lock);
+		dprintk(DBGLVL_DVB, "%s(port=%d) now feeding = %d\n",
+			__func__, port->nr, dvb->feeding);
+	}
+
+	return ret;
+}
+
+static int saa7164_dvb_stop_feed(struct dvb_demux_feed *feed)
+{
+	struct dvb_demux *demux = feed->demux;
+	struct saa7164_port *port = demux->priv;
+	struct saa7164_dvb *dvb = &port->dvb;
+	struct saa7164_dev *dev = port->dev;
+	int ret = 0;
+
+	dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr);
+
+	if (dvb) {
+		mutex_lock(&dvb->lock);
+		if (--dvb->feeding == 0) {
+			/* Stop transport */
+			ret = saa7164_dvb_stop_streaming(port);
+		}
+		mutex_unlock(&dvb->lock);
+		dprintk(DBGLVL_DVB, "%s(port=%d) now feeding = %d\n",
+			__func__, port->nr, dvb->feeding);
+	}
+
+	return ret;
+}
+
+static int dvb_register(struct saa7164_port *port)
+{
+	struct saa7164_dvb *dvb = &port->dvb;
+	struct saa7164_dev *dev = port->dev;
+	struct saa7164_buffer *buf;
+	int result, i;
+
+	dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr);
+
+	BUG_ON(port->type != SAA7164_MPEG_DVB);
+
+	/* Sanity check that the PCI configuration space is active */
+	if (port->hwcfg.BARLocation == 0) {
+		result = -ENOMEM;
+		printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d), NO PCI configuration\n",
+			DRIVER_NAME, result);
+		goto fail_adapter;
+	}
+
+	/* Init and establish defaults */
+	port->hw_streamingparams.bitspersample = 8;
+	port->hw_streamingparams.samplesperline = 188;
+	port->hw_streamingparams.numberoflines =
+		(SAA7164_TS_NUMBER_OF_LINES * 188) / 188;
+
+	port->hw_streamingparams.pitch = 188;
+	port->hw_streamingparams.linethreshold = 0;
+	port->hw_streamingparams.pagetablelistvirt = NULL;
+	port->hw_streamingparams.pagetablelistphys = NULL;
+	port->hw_streamingparams.numpagetables = 2 +
+		((SAA7164_TS_NUMBER_OF_LINES * 188) / PAGE_SIZE);
+
+	port->hw_streamingparams.numpagetableentries = port->hwcfg.buffercount;
+
+	/* Allocate the PCI resources */
+	for (i = 0; i < port->hwcfg.buffercount; i++) {
+		buf = saa7164_buffer_alloc(port,
+			port->hw_streamingparams.numberoflines *
+			port->hw_streamingparams.pitch);
+
+		if (!buf) {
+			result = -ENOMEM;
+			printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d), unable to allocate buffers\n",
+				DRIVER_NAME, result);
+			goto fail_adapter;
+		}
+
+		mutex_lock(&port->dmaqueue_lock);
+		list_add_tail(&buf->list, &port->dmaqueue.list);
+		mutex_unlock(&port->dmaqueue_lock);
+	}
+
+	/* register adapter */
+	result = dvb_register_adapter(&dvb->adapter, DRIVER_NAME, THIS_MODULE,
+			&dev->pci->dev, adapter_nr);
+	if (result < 0) {
+		printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d)\n",
+		       DRIVER_NAME, result);
+		goto fail_adapter;
+	}
+	dvb->adapter.priv = port;
+
+	/* register frontend */
+	result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
+	if (result < 0) {
+		printk(KERN_ERR "%s: dvb_register_frontend failed (errno = %d)\n",
+		       DRIVER_NAME, result);
+		goto fail_frontend;
+	}
+
+	/* register demux stuff */
+	dvb->demux.dmx.capabilities =
+		DMX_TS_FILTERING | DMX_SECTION_FILTERING |
+		DMX_MEMORY_BASED_FILTERING;
+	dvb->demux.priv       = port;
+	dvb->demux.filternum  = 256;
+	dvb->demux.feednum    = 256;
+	dvb->demux.start_feed = saa7164_dvb_start_feed;
+	dvb->demux.stop_feed  = saa7164_dvb_stop_feed;
+	result = dvb_dmx_init(&dvb->demux);
+	if (result < 0) {
+		printk(KERN_ERR "%s: dvb_dmx_init failed (errno = %d)\n",
+		       DRIVER_NAME, result);
+		goto fail_dmx;
+	}
+
+	dvb->dmxdev.filternum    = 256;
+	dvb->dmxdev.demux        = &dvb->demux.dmx;
+	dvb->dmxdev.capabilities = 0;
+	result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
+	if (result < 0) {
+		printk(KERN_ERR "%s: dvb_dmxdev_init failed (errno = %d)\n",
+		       DRIVER_NAME, result);
+		goto fail_dmxdev;
+	}
+
+	dvb->fe_hw.source = DMX_FRONTEND_0;
+	result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
+	if (result < 0) {
+		printk(KERN_ERR "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
+		       DRIVER_NAME, result);
+		goto fail_fe_hw;
+	}
+
+	dvb->fe_mem.source = DMX_MEMORY_FE;
+	result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
+	if (result < 0) {
+		printk(KERN_ERR "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
+		       DRIVER_NAME, result);
+		goto fail_fe_mem;
+	}
+
+	result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
+	if (result < 0) {
+		printk(KERN_ERR "%s: connect_frontend failed (errno = %d)\n",
+		       DRIVER_NAME, result);
+		goto fail_fe_conn;
+	}
+
+	/* register network adapter */
+	dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
+	return 0;
+
+fail_fe_conn:
+	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
+fail_fe_mem:
+	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
+fail_fe_hw:
+	dvb_dmxdev_release(&dvb->dmxdev);
+fail_dmxdev:
+	dvb_dmx_release(&dvb->demux);
+fail_dmx:
+	dvb_unregister_frontend(dvb->frontend);
+fail_frontend:
+	dvb_frontend_detach(dvb->frontend);
+	dvb_unregister_adapter(&dvb->adapter);
+fail_adapter:
+	return result;
+}
+
+int saa7164_dvb_unregister(struct saa7164_port *port)
+{
+	struct saa7164_dvb *dvb = &port->dvb;
+	struct saa7164_dev *dev = port->dev;
+	struct saa7164_buffer *b;
+	struct list_head *c, *n;
+	struct i2c_client *client;
+
+	dprintk(DBGLVL_DVB, "%s()\n", __func__);
+
+	BUG_ON(port->type != SAA7164_MPEG_DVB);
+
+	/* Remove any allocated buffers */
+	mutex_lock(&port->dmaqueue_lock);
+	list_for_each_safe(c, n, &port->dmaqueue.list) {
+		b = list_entry(c, struct saa7164_buffer, list);
+		list_del(c);
+		saa7164_buffer_dealloc(b);
+	}
+	mutex_unlock(&port->dmaqueue_lock);
+
+	if (dvb->frontend == NULL)
+		return 0;
+
+	/* remove I2C client for tuner */
+	client = port->i2c_client_tuner;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
+	/* remove I2C client for demodulator */
+	client = port->i2c_client_demod;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
+	dvb_net_release(&dvb->net);
+	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
+	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
+	dvb_dmxdev_release(&dvb->dmxdev);
+	dvb_dmx_release(&dvb->demux);
+	dvb_unregister_frontend(dvb->frontend);
+	dvb_frontend_detach(dvb->frontend);
+	dvb_unregister_adapter(&dvb->adapter);
+	return 0;
+}
+
+/* All the DVB attach calls go here, this function gets modified
+ * for each new card.
+ */
+int saa7164_dvb_register(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	struct saa7164_dvb *dvb = &port->dvb;
+	struct saa7164_i2c *i2c_bus = NULL;
+	struct si2168_config si2168_config;
+	struct si2157_config si2157_config;
+	struct i2c_adapter *adapter;
+	struct i2c_board_info info;
+	struct i2c_client *client_demod;
+	struct i2c_client *client_tuner;
+	int ret;
+
+	dprintk(DBGLVL_DVB, "%s()\n", __func__);
+
+	/* init frontend */
+	switch (dev->board) {
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
+		i2c_bus = &dev->i2c_bus[port->nr + 1];
+		switch (port->nr) {
+		case 0:
+			port->dvb.frontend = dvb_attach(tda10048_attach,
+				&hauppauge_hvr2200_1_config,
+				&i2c_bus->i2c_adap);
+
+			if (port->dvb.frontend != NULL) {
+				/* TODO: addr is in the card struct */
+				dvb_attach(tda18271_attach, port->dvb.frontend,
+					0xc0 >> 1, &i2c_bus->i2c_adap,
+					&hauppauge_hvr22x0_tuner_config);
+			}
+
+			break;
+		case 1:
+			port->dvb.frontend = dvb_attach(tda10048_attach,
+				&hauppauge_hvr2200_2_config,
+				&i2c_bus->i2c_adap);
+
+			if (port->dvb.frontend != NULL) {
+				/* TODO: addr is in the card struct */
+				dvb_attach(tda18271_attach, port->dvb.frontend,
+					0xc0 >> 1, &i2c_bus->i2c_adap,
+					&hauppauge_hvr22x0s_tuner_config);
+			}
+
+			break;
+		}
+		break;
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
+		i2c_bus = &dev->i2c_bus[port->nr + 1];
+
+		port->dvb.frontend = dvb_attach(s5h1411_attach,
+			&hauppauge_s5h1411_config,
+			&i2c_bus->i2c_adap);
+
+		if (port->dvb.frontend != NULL) {
+			if (port->nr == 0) {
+				/* Master TDA18271 */
+				/* TODO: addr is in the card struct */
+				dvb_attach(tda18271_attach, port->dvb.frontend,
+					0xc0 >> 1, &i2c_bus->i2c_adap,
+					&hauppauge_hvr22x0_tuner_config);
+			} else {
+				/* Slave TDA18271 */
+				dvb_attach(tda18271_attach, port->dvb.frontend,
+					0xc0 >> 1, &i2c_bus->i2c_adap,
+					&hauppauge_hvr22x0s_tuner_config);
+			}
+		}
+
+		break;
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255proto:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255:
+		i2c_bus = &dev->i2c_bus[2];
+
+		if (port->nr == 0) {
+			port->dvb.frontend = dvb_attach(lgdt3306a_attach,
+				&hauppauge_hvr2255a_config, &i2c_bus->i2c_adap);
+		} else {
+			port->dvb.frontend = dvb_attach(lgdt3306a_attach,
+				&hauppauge_hvr2255b_config, &i2c_bus->i2c_adap);
+		}
+
+		if (port->dvb.frontend != NULL) {
+
+			if (port->nr == 0) {
+				si2157_attach(port, &dev->i2c_bus[0].i2c_adap,
+					      port->dvb.frontend, 0xc0,
+					      &hauppauge_hvr2255_tuner_config);
+			} else {
+				si2157_attach(port, &dev->i2c_bus[1].i2c_adap,
+					      port->dvb.frontend, 0xc0,
+					      &hauppauge_hvr2255_tuner_config);
+			}
+		}
+		break;
+	case SAA7164_BOARD_HAUPPAUGE_HVR2205:
+
+		if (port->nr == 0) {
+			/* attach frontend */
+			memset(&si2168_config, 0, sizeof(si2168_config));
+			si2168_config.i2c_adapter = &adapter;
+			si2168_config.fe = &port->dvb.frontend;
+			si2168_config.ts_mode = SI2168_TS_SERIAL;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2168", I2C_NAME_SIZE);
+			info.addr = 0xc8 >> 1;
+			info.platform_data = &si2168_config;
+			request_module(info.type);
+			client_demod = i2c_new_client_device(&dev->i2c_bus[2].i2c_adap, &info);
+			if (!i2c_client_has_driver(client_demod))
+				goto frontend_detach;
+
+			if (!try_module_get(client_demod->dev.driver->owner)) {
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_demod = client_demod;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.if_port = 1;
+			si2157_config.fe = port->dvb.frontend;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0xc0 >> 1;
+			info.platform_data = &si2157_config;
+			request_module(info.type);
+			client_tuner = i2c_new_client_device(&dev->i2c_bus[0].i2c_adap, &info);
+			if (!i2c_client_has_driver(client_tuner)) {
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+		} else {
+			/* attach frontend */
+			memset(&si2168_config, 0, sizeof(si2168_config));
+			si2168_config.i2c_adapter = &adapter;
+			si2168_config.fe = &port->dvb.frontend;
+			si2168_config.ts_mode = SI2168_TS_SERIAL;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2168", I2C_NAME_SIZE);
+			info.addr = 0xcc >> 1;
+			info.platform_data = &si2168_config;
+			request_module(info.type);
+			client_demod = i2c_new_client_device(&dev->i2c_bus[2].i2c_adap, &info);
+			if (!i2c_client_has_driver(client_demod))
+				goto frontend_detach;
+
+			if (!try_module_get(client_demod->dev.driver->owner)) {
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_demod = client_demod;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = port->dvb.frontend;
+			si2157_config.if_port = 1;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strscpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0xc0 >> 1;
+			info.platform_data = &si2157_config;
+			request_module(info.type);
+			client_tuner = i2c_new_client_device(&dev->i2c_bus[1].i2c_adap, &info);
+			if (!i2c_client_has_driver(client_tuner)) {
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+		}
+
+		break;
+	default:
+		printk(KERN_ERR "%s: The frontend isn't supported\n",
+		       dev->name);
+		break;
+	}
+	if (NULL == dvb->frontend) {
+		printk(KERN_ERR "%s() Frontend initialization failed\n",
+		       __func__);
+		return -1;
+	}
+
+	/* register everything */
+	ret = dvb_register(port);
+	if (ret < 0) {
+		if (dvb->frontend->ops.release)
+			dvb->frontend->ops.release(dvb->frontend);
+		return ret;
+	}
+
+	return 0;
+
+frontend_detach:
+	printk(KERN_ERR "%s() Frontend/I2C initialization failed\n", __func__);
+	return -1;
+}

linux-7.2.3/drivers/media/pci/saa7164/saa7164-fw.c

@@ -0,0 +1,597 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
+ */
+
+#include <linux/firmware.h>
+#include <linux/slab.h>
+
+#include "saa7164.h"
+
+#define SAA7164_REV2_FIRMWARE		"v4l-saa7164-1.0.2-3.fw"
+#define SAA7164_REV2_FIRMWARE_SIZE	4038864
+
+#define SAA7164_REV3_FIRMWARE		"NXP7164-2010-03-10.1.fw"
+#define SAA7164_REV3_FIRMWARE_SIZE	4019072
+
+struct fw_header {
+	u32	firmwaresize;
+	u32	bslsize;
+	u32	reserved;
+	u32	version;
+};
+
+static int saa7164_dl_wait_ack(struct saa7164_dev *dev, u32 reg)
+{
+	u32 timeout = SAA_DEVICE_TIMEOUT;
+	while ((saa7164_readl(reg) & 0x01) == 0) {
+		timeout -= 10;
+		if (timeout == 0) {
+			printk(KERN_ERR "%s() timeout (no d/l ack)\n",
+				__func__);
+			return -EBUSY;
+		}
+		msleep(100);
+	}
+
+	return 0;
+}
+
+static int saa7164_dl_wait_clr(struct saa7164_dev *dev, u32 reg)
+{
+	u32 timeout = SAA_DEVICE_TIMEOUT;
+	while (saa7164_readl(reg) & 0x01) {
+		timeout -= 10;
+		if (timeout == 0) {
+			printk(KERN_ERR "%s() timeout (no d/l clr)\n",
+				__func__);
+			return -EBUSY;
+		}
+		msleep(100);
+	}
+
+	return 0;
+}
+
+/* TODO: move dlflags into dev-> and change to write/readl/b */
+/* TODO: Excessive levels of debug */
+static int saa7164_downloadimage(struct saa7164_dev *dev, u8 *src, u32 srcsize,
+				 u32 dlflags, u8 __iomem *dst, u32 dstsize)
+{
+	u32 reg, timeout, offset;
+	u8 *srcbuf = NULL;
+	int ret;
+
+	u32 dlflag = dlflags;
+	u32 dlflag_ack = dlflag + 4;
+	u32 drflag = dlflag_ack + 4;
+	u32 drflag_ack = drflag + 4;
+	u32 bleflag = drflag_ack + 4;
+
+	dprintk(DBGLVL_FW,
+		"%s(image=%p, size=%d, flags=0x%x, dst=%p, dstsize=0x%x)\n",
+		__func__, src, srcsize, dlflags, dst, dstsize);
+
+	if ((src == NULL) || (dst == NULL)) {
+		ret = -EIO;
+		goto out;
+	}
+
+	srcbuf = kzalloc(4 * 1048576, GFP_KERNEL);
+	if (NULL == srcbuf) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	if (srcsize > (4*1048576)) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memcpy(srcbuf, src, srcsize);
+
+	dprintk(DBGLVL_FW, "%s() dlflag = 0x%x\n", __func__, dlflag);
+	dprintk(DBGLVL_FW, "%s() dlflag_ack = 0x%x\n", __func__, dlflag_ack);
+	dprintk(DBGLVL_FW, "%s() drflag = 0x%x\n", __func__, drflag);
+	dprintk(DBGLVL_FW, "%s() drflag_ack = 0x%x\n", __func__, drflag_ack);
+	dprintk(DBGLVL_FW, "%s() bleflag = 0x%x\n", __func__, bleflag);
+
+	reg = saa7164_readl(dlflag);
+	dprintk(DBGLVL_FW, "%s() dlflag (0x%x)= 0x%x\n", __func__, dlflag, reg);
+	if (reg == 1)
+		dprintk(DBGLVL_FW,
+			"%s() Download flag already set, please reboot\n",
+			__func__);
+
+	/* Indicate download start */
+	saa7164_writel(dlflag, 1);
+	ret = saa7164_dl_wait_ack(dev, dlflag_ack);
+	if (ret < 0)
+		goto out;
+
+	/* Ack download start, then wait for wait */
+	saa7164_writel(dlflag, 0);
+	ret = saa7164_dl_wait_clr(dev, dlflag_ack);
+	if (ret < 0)
+		goto out;
+
+	/* Deal with the raw firmware, in the appropriate chunk size */
+	for (offset = 0; srcsize > dstsize;
+		srcsize -= dstsize, offset += dstsize) {
+
+		dprintk(DBGLVL_FW, "%s() memcpy %d\n", __func__, dstsize);
+		memcpy_toio(dst, srcbuf + offset, dstsize);
+
+		/* Flag the data as ready */
+		saa7164_writel(drflag, 1);
+		ret = saa7164_dl_wait_ack(dev, drflag_ack);
+		if (ret < 0)
+			goto out;
+
+		/* Wait for indication data was received */
+		saa7164_writel(drflag, 0);
+		ret = saa7164_dl_wait_clr(dev, drflag_ack);
+		if (ret < 0)
+			goto out;
+
+	}
+
+	dprintk(DBGLVL_FW, "%s() memcpy(l) %d\n", __func__, dstsize);
+	/* Write last block to the device */
+	memcpy_toio(dst, srcbuf+offset, srcsize);
+
+	/* Flag the data as ready */
+	saa7164_writel(drflag, 1);
+	ret = saa7164_dl_wait_ack(dev, drflag_ack);
+	if (ret < 0)
+		goto out;
+
+	saa7164_writel(drflag, 0);
+	timeout = 0;
+	while (saa7164_readl(bleflag) != SAA_DEVICE_IMAGE_BOOTING) {
+		if (saa7164_readl(bleflag) & SAA_DEVICE_IMAGE_CORRUPT) {
+			printk(KERN_ERR "%s() image corrupt\n", __func__);
+			ret = -EBUSY;
+			goto out;
+		}
+
+		if (saa7164_readl(bleflag) & SAA_DEVICE_MEMORY_CORRUPT) {
+			printk(KERN_ERR "%s() device memory corrupt\n",
+				__func__);
+			ret = -EBUSY;
+			goto out;
+		}
+
+		msleep(10); /* Checkpatch throws a < 20ms warning */
+		if (timeout++ > 60)
+			break;
+	}
+
+	printk(KERN_INFO "%s() Image downloaded, booting...\n", __func__);
+
+	ret = saa7164_dl_wait_clr(dev, drflag_ack);
+	if (ret < 0)
+		goto out;
+
+	printk(KERN_INFO "%s() Image booted successfully.\n", __func__);
+	ret = 0;
+
+out:
+	kfree(srcbuf);
+	return ret;
+}
+
+/* TODO: Excessive debug */
+/* Load the firmware. Optionally it can be in ROM or newer versions
+ * can be on disk, saving the expense of the ROM hardware. */
+int saa7164_downloadfirmware(struct saa7164_dev *dev)
+{
+	/* u32 second_timeout = 60 * SAA_DEVICE_TIMEOUT; */
+	u32 tmp, filesize, version, err_flags, first_timeout, fwlength;
+	u32 second_timeout, updatebootloader = 1, bootloadersize = 0;
+	const struct firmware *fw = NULL;
+	struct fw_header *hdr, *boothdr = NULL, *fwhdr;
+	u32 bootloaderversion = 0, fwloadersize;
+	u8 *bootloaderoffset = NULL, *fwloaderoffset;
+	char *fwname;
+	int ret;
+
+	dprintk(DBGLVL_FW, "%s()\n", __func__);
+
+	if (saa7164_boards[dev->board].chiprev == SAA7164_CHIP_REV2) {
+		fwname = SAA7164_REV2_FIRMWARE;
+		fwlength = SAA7164_REV2_FIRMWARE_SIZE;
+	} else {
+		fwname = SAA7164_REV3_FIRMWARE;
+		fwlength = SAA7164_REV3_FIRMWARE_SIZE;
+	}
+
+	version = saa7164_getcurrentfirmwareversion(dev);
+
+	if (version == 0x00) {
+
+		second_timeout = 100;
+		first_timeout = 100;
+		err_flags = saa7164_readl(SAA_BOOTLOADERERROR_FLAGS);
+		dprintk(DBGLVL_FW, "%s() err_flags = %x\n",
+			__func__, err_flags);
+
+		while (err_flags != SAA_DEVICE_IMAGE_BOOTING) {
+			dprintk(DBGLVL_FW, "%s() err_flags = %x\n",
+				__func__, err_flags);
+			msleep(10); /* Checkpatch throws a < 20ms warning */
+
+			if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) {
+				printk(KERN_ERR "%s() firmware corrupt\n",
+					__func__);
+				break;
+			}
+			if (err_flags & SAA_DEVICE_MEMORY_CORRUPT) {
+				printk(KERN_ERR "%s() device memory corrupt\n",
+					__func__);
+				break;
+			}
+			if (err_flags & SAA_DEVICE_NO_IMAGE) {
+				printk(KERN_ERR "%s() no first image\n",
+				__func__);
+				break;
+			}
+			if (err_flags & SAA_DEVICE_IMAGE_SEARCHING) {
+				first_timeout -= 10;
+				if (first_timeout == 0) {
+					printk(KERN_ERR
+						"%s() no first image\n",
+						__func__);
+					break;
+				}
+			} else if (err_flags & SAA_DEVICE_IMAGE_LOADING) {
+				second_timeout -= 10;
+				if (second_timeout == 0) {
+					printk(KERN_ERR
+					"%s() FW load time exceeded\n",
+						__func__);
+					break;
+				}
+			} else {
+				second_timeout -= 10;
+				if (second_timeout == 0) {
+					printk(KERN_ERR
+					"%s() Unknown bootloader flags 0x%x\n",
+						__func__, err_flags);
+					break;
+				}
+			}
+
+			err_flags = saa7164_readl(SAA_BOOTLOADERERROR_FLAGS);
+		} /* While != Booting */
+
+		if (err_flags == SAA_DEVICE_IMAGE_BOOTING) {
+			dprintk(DBGLVL_FW, "%s() Loader 1 has loaded.\n",
+				__func__);
+			first_timeout = SAA_DEVICE_TIMEOUT;
+			second_timeout = 100;
+
+			err_flags = saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS);
+			dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n",
+				__func__, err_flags);
+			while (err_flags != SAA_DEVICE_IMAGE_BOOTING) {
+				dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n",
+					__func__, err_flags);
+				msleep(10); /* Checkpatch throws a < 20ms warning */
+
+				if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) {
+					printk(KERN_ERR
+						"%s() firmware corrupt\n",
+						__func__);
+					break;
+				}
+				if (err_flags & SAA_DEVICE_MEMORY_CORRUPT) {
+					printk(KERN_ERR
+						"%s() device memory corrupt\n",
+						__func__);
+					break;
+				}
+				if (err_flags & SAA_DEVICE_NO_IMAGE) {
+					printk(KERN_ERR "%s() no second image\n",
+						__func__);
+					break;
+				}
+				if (err_flags & SAA_DEVICE_IMAGE_SEARCHING) {
+					first_timeout -= 10;
+					if (first_timeout == 0) {
+						printk(KERN_ERR
+						"%s() no second image\n",
+							__func__);
+						break;
+					}
+				} else if (err_flags &
+					SAA_DEVICE_IMAGE_LOADING) {
+					second_timeout -= 10;
+					if (second_timeout == 0) {
+						printk(KERN_ERR
+						"%s() FW load time exceeded\n",
+							__func__);
+						break;
+					}
+				} else {
+					second_timeout -= 10;
+					if (second_timeout == 0) {
+						printk(KERN_ERR
+					"%s() Unknown bootloader flags 0x%x\n",
+							__func__, err_flags);
+						break;
+					}
+				}
+
+				err_flags =
+				saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS);
+			} /* err_flags != SAA_DEVICE_IMAGE_BOOTING */
+
+			dprintk(DBGLVL_FW, "%s() Loader flags 1:0x%x 2:0x%x.\n",
+				__func__,
+				saa7164_readl(SAA_BOOTLOADERERROR_FLAGS),
+				saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS));
+
+		} /* err_flags == SAA_DEVICE_IMAGE_BOOTING */
+
+		/* It's possible for both firmwares to have booted,
+		 * but that doesn't mean they've finished booting yet.
+		 */
+		if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) ==
+			SAA_DEVICE_IMAGE_BOOTING) &&
+			(saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS) ==
+			SAA_DEVICE_IMAGE_BOOTING)) {
+
+
+			dprintk(DBGLVL_FW, "%s() Loader 2 has loaded.\n",
+				__func__);
+
+			first_timeout = SAA_DEVICE_TIMEOUT;
+			while (first_timeout) {
+				msleep(10); /* Checkpatch throws a < 20ms warning */
+
+				version =
+					saa7164_getcurrentfirmwareversion(dev);
+				if (version) {
+					dprintk(DBGLVL_FW,
+					"%s() All f/w loaded successfully\n",
+						__func__);
+					break;
+				} else {
+					first_timeout -= 10;
+					if (first_timeout == 0) {
+						printk(KERN_ERR
+						"%s() FW did not boot\n",
+							__func__);
+						break;
+					}
+				}
+			}
+		}
+		version = saa7164_getcurrentfirmwareversion(dev);
+	} /* version == 0 */
+
+	/* Has the firmware really booted? */
+	if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) ==
+		SAA_DEVICE_IMAGE_BOOTING) &&
+		(saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS) ==
+		SAA_DEVICE_IMAGE_BOOTING) && (version == 0)) {
+
+		printk(KERN_ERR
+			"%s() The firmware hung, probably bad firmware\n",
+			__func__);
+
+		/* Tell the second stage loader we have a deadlock */
+		saa7164_writel(SAA_DEVICE_DEADLOCK_DETECTED_OFFSET,
+			SAA_DEVICE_DEADLOCK_DETECTED);
+
+		saa7164_getfirmwarestatus(dev);
+
+		return -ENOMEM;
+	}
+
+	dprintk(DBGLVL_FW, "Device has Firmware Version %d.%d.%d.%d\n",
+		(version & 0x0000fc00) >> 10,
+		(version & 0x000003e0) >> 5,
+		(version & 0x0000001f),
+		(version & 0xffff0000) >> 16);
+
+	/* Load the firmware from the disk if required */
+	if (version == 0) {
+
+		printk(KERN_INFO "%s() Waiting for firmware upload (%s)\n",
+			__func__, fwname);
+
+		ret = request_firmware(&fw, fwname, &dev->pci->dev);
+		if (ret) {
+			printk(KERN_ERR "%s() Upload failed. (file not found?)\n",
+			       __func__);
+			return -ENOMEM;
+		}
+
+		printk(KERN_INFO "%s() firmware read %zu bytes.\n",
+			__func__, fw->size);
+
+		if (fw->size != fwlength) {
+			printk(KERN_ERR "saa7164: firmware incorrect size %zu != %u\n",
+				fw->size, fwlength);
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		printk(KERN_INFO "%s() firmware loaded.\n", __func__);
+
+		hdr = (struct fw_header *)fw->data;
+		printk(KERN_INFO "Firmware file header part 1:\n");
+		printk(KERN_INFO " .FirmwareSize = 0x%x\n", hdr->firmwaresize);
+		printk(KERN_INFO " .BSLSize = 0x%x\n", hdr->bslsize);
+		printk(KERN_INFO " .Reserved = 0x%x\n", hdr->reserved);
+		printk(KERN_INFO " .Version = 0x%x\n", hdr->version);
+
+		/* Retrieve bootloader if reqd */
+		if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0))
+			/* Second bootloader in the firmware file */
+			filesize = hdr->reserved * 16;
+		else
+			filesize = (hdr->firmwaresize + hdr->bslsize) *
+				16 + sizeof(struct fw_header);
+
+		printk(KERN_INFO "%s() SecBootLoader.FileSize = %d\n",
+			__func__, filesize);
+
+		/* Get bootloader (if reqd) and firmware header */
+		if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) {
+			/* Second boot loader is required */
+
+			/* Get the loader header */
+			boothdr = (struct fw_header *)(fw->data +
+				sizeof(struct fw_header));
+
+			bootloaderversion =
+				saa7164_readl(SAA_DEVICE_2ND_VERSION);
+			dprintk(DBGLVL_FW, "Onboard BootLoader:\n");
+			dprintk(DBGLVL_FW, "->Flag 0x%x\n",
+				saa7164_readl(SAA_BOOTLOADERERROR_FLAGS));
+			dprintk(DBGLVL_FW, "->Ack 0x%x\n",
+				saa7164_readl(SAA_DATAREADY_FLAG_ACK));
+			dprintk(DBGLVL_FW, "->FW Version 0x%x\n", version);
+			dprintk(DBGLVL_FW, "->Loader Version 0x%x\n",
+				bootloaderversion);
+
+			if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) ==
+				0x03) && (saa7164_readl(SAA_DATAREADY_FLAG_ACK)
+				== 0x00) && (version == 0x00)) {
+
+				dprintk(DBGLVL_FW, "BootLoader version in  rom %d.%d.%d.%d\n",
+					(bootloaderversion & 0x0000fc00) >> 10,
+					(bootloaderversion & 0x000003e0) >> 5,
+					(bootloaderversion & 0x0000001f),
+					(bootloaderversion & 0xffff0000) >> 16
+					);
+				dprintk(DBGLVL_FW, "BootLoader version in file %d.%d.%d.%d\n",
+					(boothdr->version & 0x0000fc00) >> 10,
+					(boothdr->version & 0x000003e0) >> 5,
+					(boothdr->version & 0x0000001f),
+					(boothdr->version & 0xffff0000) >> 16
+					);
+
+				if (bootloaderversion == boothdr->version)
+					updatebootloader = 0;
+			}
+
+			/* Calculate offset to firmware header */
+			tmp = (boothdr->firmwaresize + boothdr->bslsize) * 16 +
+				(sizeof(struct fw_header) +
+				sizeof(struct fw_header));
+
+			fwhdr = (struct fw_header *)(fw->data+tmp);
+		} else {
+			/* No second boot loader */
+			fwhdr = hdr;
+		}
+
+		dprintk(DBGLVL_FW, "Firmware version in file %d.%d.%d.%d\n",
+			(fwhdr->version & 0x0000fc00) >> 10,
+			(fwhdr->version & 0x000003e0) >> 5,
+			(fwhdr->version & 0x0000001f),
+			(fwhdr->version & 0xffff0000) >> 16
+			);
+
+		if (version == fwhdr->version) {
+			/* No download, firmware already on board */
+			ret = 0;
+			goto out;
+		}
+
+		if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) {
+			if (updatebootloader) {
+				/* Get ready to upload the bootloader */
+				bootloadersize = (boothdr->firmwaresize +
+					boothdr->bslsize) * 16 +
+					sizeof(struct fw_header);
+
+				bootloaderoffset = (u8 *)(fw->data +
+					sizeof(struct fw_header));
+
+				dprintk(DBGLVL_FW, "bootloader d/l starts.\n");
+				printk(KERN_INFO "%s() FirmwareSize = 0x%x\n",
+					__func__, boothdr->firmwaresize);
+				printk(KERN_INFO "%s() BSLSize = 0x%x\n",
+					__func__, boothdr->bslsize);
+				printk(KERN_INFO "%s() Reserved = 0x%x\n",
+					__func__, boothdr->reserved);
+				printk(KERN_INFO "%s() Version = 0x%x\n",
+					__func__, boothdr->version);
+				ret = saa7164_downloadimage(
+					dev,
+					bootloaderoffset,
+					bootloadersize,
+					SAA_DOWNLOAD_FLAGS,
+					dev->bmmio + SAA_DEVICE_DOWNLOAD_OFFSET,
+					SAA_DEVICE_BUFFERBLOCKSIZE);
+				if (ret < 0) {
+					printk(KERN_ERR
+						"bootloader d/l has failed\n");
+					goto out;
+				}
+				dprintk(DBGLVL_FW,
+					"bootloader download complete.\n");
+
+			}
+
+			printk(KERN_ERR "starting firmware download(2)\n");
+			bootloadersize = (boothdr->firmwaresize +
+				boothdr->bslsize) * 16 +
+				sizeof(struct fw_header);
+
+			bootloaderoffset =
+				(u8 *)(fw->data + sizeof(struct fw_header));
+
+			fwloaderoffset = bootloaderoffset + bootloadersize;
+
+			/* TODO: fix this bounds overrun here with old f/ws */
+			fwloadersize = (fwhdr->firmwaresize + fwhdr->bslsize) *
+				16 + sizeof(struct fw_header);
+
+			ret = saa7164_downloadimage(
+				dev,
+				fwloaderoffset,
+				fwloadersize,
+				SAA_DEVICE_2ND_DOWNLOADFLAG_OFFSET,
+				dev->bmmio + SAA_DEVICE_2ND_DOWNLOAD_OFFSET,
+				SAA_DEVICE_2ND_BUFFERBLOCKSIZE);
+			if (ret < 0) {
+				printk(KERN_ERR "firmware download failed\n");
+				goto out;
+			}
+			printk(KERN_ERR "firmware download complete.\n");
+
+		} else {
+
+			/* No bootloader update reqd, download firmware only */
+			printk(KERN_ERR "starting firmware download(3)\n");
+
+			ret = saa7164_downloadimage(
+				dev,
+				(u8 *)fw->data,
+				fw->size,
+				SAA_DOWNLOAD_FLAGS,
+				dev->bmmio + SAA_DEVICE_DOWNLOAD_OFFSET,
+				SAA_DEVICE_BUFFERBLOCKSIZE);
+			if (ret < 0) {
+				printk(KERN_ERR "firmware download failed\n");
+				goto out;
+			}
+			printk(KERN_ERR "firmware download complete.\n");
+		}
+	}
+
+	dev->firmwareloaded = 1;
+	ret = 0;
+
+out:
+	release_firmware(fw);
+	return ret;
+}

linux-7.2.3/drivers/media/pci/saa7164/saa7164-i2c.c

@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "saa7164.h"
+
+static int i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
+{
+	struct saa7164_i2c *bus = i2c_adap->algo_data;
+	struct saa7164_dev *dev = bus->dev;
+	int i, retval = 0;
+
+	dprintk(DBGLVL_I2C, "%s(num = %d)\n", __func__, num);
+
+	for (i = 0 ; i < num; i++) {
+		dprintk(DBGLVL_I2C, "%s(num = %d) addr = 0x%02x  len = 0x%x\n",
+			__func__, num, msgs[i].addr, msgs[i].len);
+		if (msgs[i].flags & I2C_M_RD) {
+			retval = saa7164_api_i2c_read(bus,
+				msgs[i].addr,
+				0 /* reglen */,
+				NULL /* reg */, msgs[i].len, msgs[i].buf);
+		} else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) &&
+			   msgs[i].addr == msgs[i + 1].addr) {
+			/* write then read from same address */
+
+			retval = saa7164_api_i2c_read(bus, msgs[i].addr,
+				msgs[i].len, msgs[i].buf,
+				msgs[i+1].len, msgs[i+1].buf
+				);
+
+			i++;
+
+			if (retval < 0)
+				goto err;
+		} else {
+			/* write */
+			retval = saa7164_api_i2c_write(bus, msgs[i].addr,
+				msgs[i].len, msgs[i].buf);
+		}
+		if (retval < 0)
+			goto err;
+	}
+	return num;
+
+err:
+	return retval;
+}
+
+static u32 saa7164_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C;
+}
+
+static const struct i2c_algorithm saa7164_i2c_algo_template = {
+	.master_xfer	= i2c_xfer,
+	.functionality	= saa7164_functionality,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static const struct i2c_adapter saa7164_i2c_adap_template = {
+	.name              = "saa7164",
+	.owner             = THIS_MODULE,
+	.algo              = &saa7164_i2c_algo_template,
+};
+
+static const struct i2c_client saa7164_i2c_client_template = {
+	.name	= "saa7164 internal",
+};
+
+int saa7164_i2c_register(struct saa7164_i2c *bus)
+{
+	struct saa7164_dev *dev = bus->dev;
+
+	dprintk(DBGLVL_I2C, "%s(bus = %d)\n", __func__, bus->nr);
+
+	bus->i2c_adap = saa7164_i2c_adap_template;
+	bus->i2c_client = saa7164_i2c_client_template;
+
+	bus->i2c_adap.dev.parent = &dev->pci->dev;
+
+	strscpy(bus->i2c_adap.name, bus->dev->name,
+		sizeof(bus->i2c_adap.name));
+
+	bus->i2c_adap.algo_data = bus;
+	i2c_set_adapdata(&bus->i2c_adap, bus);
+	i2c_add_adapter(&bus->i2c_adap);
+
+	bus->i2c_client.adapter = &bus->i2c_adap;
+
+	if (0 != bus->i2c_rc)
+		printk(KERN_ERR "%s: i2c bus %d register FAILED\n",
+			dev->name, bus->nr);
+
+	return bus->i2c_rc;
+}
+
+int saa7164_i2c_unregister(struct saa7164_i2c *bus)
+{
+	i2c_del_adapter(&bus->i2c_adap);
+	return 0;
+}

linux-7.2.3/drivers/media/pci/saa7164/saa7164-reg.h

@@ -0,0 +1,205 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
+ */
+
+/* TODO: Retest the driver with errors expressed as negatives */
+
+/* Result codes */
+#define SAA_OK				0
+#define SAA_ERR_BAD_PARAMETER		0x09
+#define SAA_ERR_NO_RESOURCES		0x0c
+#define SAA_ERR_NOT_SUPPORTED		0x13
+#define SAA_ERR_BUSY			0x15
+#define SAA_ERR_READ			0x17
+#define SAA_ERR_TIMEOUT			0x1f
+#define SAA_ERR_OVERFLOW		0x20
+#define SAA_ERR_EMPTY			0x22
+#define SAA_ERR_NOT_STARTED		0x23
+#define SAA_ERR_ALREADY_STARTED		0x24
+#define SAA_ERR_NOT_STOPPED		0x25
+#define SAA_ERR_ALREADY_STOPPED		0x26
+#define SAA_ERR_INVALID_COMMAND		0x3e
+#define SAA_ERR_NULL_PACKET		0x59
+
+/* Errors and flags from the silicon */
+#define PVC_ERRORCODE_UNKNOWN		0x00
+#define PVC_ERRORCODE_INVALID_COMMAND	0x01
+#define PVC_ERRORCODE_INVALID_CONTROL	0x02
+#define PVC_ERRORCODE_INVALID_DATA	0x03
+#define PVC_ERRORCODE_TIMEOUT		0x04
+#define PVC_ERRORCODE_NAK		0x05
+#define PVC_RESPONSEFLAG_ERROR		0x01
+#define PVC_RESPONSEFLAG_OVERFLOW	0x02
+#define PVC_RESPONSEFLAG_RESET		0x04
+#define PVC_RESPONSEFLAG_INTERFACE	0x08
+#define PVC_RESPONSEFLAG_CONTINUED	0x10
+#define PVC_CMDFLAG_INTERRUPT		0x02
+#define PVC_CMDFLAG_INTERFACE		0x04
+#define PVC_CMDFLAG_SERIALIZE		0x08
+#define PVC_CMDFLAG_CONTINUE		0x10
+
+/* Silicon Commands */
+#define GET_DESCRIPTORS_CONTROL		0x01
+#define GET_STRING_CONTROL		0x03
+#define GET_LANGUAGE_CONTROL		0x05
+#define SET_POWER_CONTROL		0x07
+#define GET_FW_STATUS_CONTROL		0x08
+#define GET_FW_VERSION_CONTROL		0x09
+#define SET_DEBUG_LEVEL_CONTROL		0x0B
+#define GET_DEBUG_DATA_CONTROL		0x0C
+#define GET_PRODUCTION_INFO_CONTROL	0x0D
+
+/* cmd defines */
+#define SAA_CMDFLAG_CONTINUE		0x10
+#define SAA_CMD_MAX_MSG_UNITS		256
+
+/* Some defines */
+#define SAA_BUS_TIMEOUT			50
+#define SAA_DEVICE_TIMEOUT		5000
+#define SAA_DEVICE_MAXREQUESTSIZE	256
+
+/* Register addresses */
+#define SAA_DEVICE_VERSION		0x30
+#define SAA_DOWNLOAD_FLAGS		0x34
+#define SAA_DOWNLOAD_FLAG		0x34
+#define SAA_DOWNLOAD_FLAG_ACK		0x38
+#define SAA_DATAREADY_FLAG		0x3C
+#define SAA_DATAREADY_FLAG_ACK		0x40
+
+/* Boot loader register and bit definitions */
+#define SAA_BOOTLOADERERROR_FLAGS	0x44
+#define SAA_DEVICE_IMAGE_SEARCHING	0x01
+#define SAA_DEVICE_IMAGE_LOADING	0x02
+#define SAA_DEVICE_IMAGE_BOOTING	0x03
+#define SAA_DEVICE_IMAGE_CORRUPT	0x04
+#define SAA_DEVICE_MEMORY_CORRUPT	0x08
+#define SAA_DEVICE_NO_IMAGE		0x10
+
+/* Register addresses */
+#define SAA_DEVICE_2ND_VERSION			0x50
+#define SAA_DEVICE_2ND_DOWNLOADFLAG_OFFSET	0x54
+
+/* Register addresses */
+#define SAA_SECONDSTAGEERROR_FLAGS		0x64
+
+/* Bootloader regs and flags */
+#define SAA_DEVICE_DEADLOCK_DETECTED_OFFSET	0x6C
+#define SAA_DEVICE_DEADLOCK_DETECTED		0xDEADDEAD
+
+/* Basic firmware status registers */
+#define SAA_DEVICE_SYSINIT_STATUS_OFFSET	0x70
+#define SAA_DEVICE_SYSINIT_STATUS		0x70
+#define SAA_DEVICE_SYSINIT_MODE			0x74
+#define SAA_DEVICE_SYSINIT_SPEC			0x78
+#define SAA_DEVICE_SYSINIT_INST			0x7C
+#define SAA_DEVICE_SYSINIT_CPULOAD		0x80
+#define SAA_DEVICE_SYSINIT_REMAINHEAP		0x84
+
+#define SAA_DEVICE_DOWNLOAD_OFFSET		0x1000
+#define SAA_DEVICE_BUFFERBLOCKSIZE		0x1000
+
+#define SAA_DEVICE_2ND_BUFFERBLOCKSIZE		0x100000
+#define SAA_DEVICE_2ND_DOWNLOAD_OFFSET		0x200000
+
+/* Descriptors */
+#define CS_INTERFACE	0x24
+
+/* Descriptor subtypes */
+#define VC_INPUT_TERMINAL		0x02
+#define VC_OUTPUT_TERMINAL		0x03
+#define VC_SELECTOR_UNIT		0x04
+#define VC_PROCESSING_UNIT		0x05
+#define FEATURE_UNIT			0x06
+#define TUNER_UNIT			0x09
+#define ENCODER_UNIT			0x0A
+#define EXTENSION_UNIT			0x0B
+#define VC_TUNER_PATH			0xF0
+#define PVC_HARDWARE_DESCRIPTOR		0xF1
+#define PVC_INTERFACE_DESCRIPTOR	0xF2
+#define PVC_INFRARED_UNIT		0xF3
+#define DRM_UNIT			0xF4
+#define GENERAL_REQUEST			0xF5
+
+/* Format Types */
+#define VS_FORMAT_TYPE         0x02
+#define VS_FORMAT_TYPE_I       0x01
+#define VS_FORMAT_UNCOMPRESSED 0x04
+#define VS_FRAME_UNCOMPRESSED  0x05
+#define VS_FORMAT_MPEG2PS      0x09
+#define VS_FORMAT_MPEG2TS      0x0A
+#define VS_FORMAT_MPEG4SL      0x0B
+#define VS_FORMAT_WM9          0x0C
+#define VS_FORMAT_DIVX         0x0D
+#define VS_FORMAT_VBI          0x0E
+#define VS_FORMAT_RDS          0x0F
+
+/* Device extension commands */
+#define EXU_REGISTER_ACCESS_CONTROL	0x00
+#define EXU_GPIO_CONTROL		0x01
+#define EXU_GPIO_GROUP_CONTROL		0x02
+#define EXU_INTERRUPT_CONTROL		0x03
+
+/* State Transition and args */
+#define SAA_PROBE_CONTROL	0x01
+#define SAA_COMMIT_CONTROL	0x02
+#define SAA_STATE_CONTROL	0x03
+#define SAA_DMASTATE_STOP	0x00
+#define SAA_DMASTATE_ACQUIRE	0x01
+#define SAA_DMASTATE_PAUSE	0x02
+#define SAA_DMASTATE_RUN	0x03
+
+/* A/V Mux Input Selector */
+#define SU_INPUT_SELECT_CONTROL 0x01
+
+/* Encoder Profiles */
+#define EU_PROFILE_PS_DVD	0x06
+#define EU_PROFILE_TS_HQ	0x09
+#define EU_VIDEO_FORMAT_MPEG_2	0x02
+
+/* Tuner */
+#define TU_AUDIO_MODE_CONTROL  0x17
+
+/* Video Formats */
+#define TU_STANDARD_CONTROL		0x00
+#define TU_STANDARD_AUTO_CONTROL	0x01
+#define TU_STANDARD_NONE		0x00
+#define TU_STANDARD_NTSC_M		0x01
+#define TU_STANDARD_PAL_I		0x08
+#define TU_STANDARD_MANUAL		0x00
+#define TU_STANDARD_AUTO		0x01
+
+/* Video Controls */
+#define PU_BRIGHTNESS_CONTROL	0x02
+#define PU_CONTRAST_CONTROL	0x03
+#define PU_HUE_CONTROL		0x06
+#define PU_SATURATION_CONTROL	0x07
+#define PU_SHARPNESS_CONTROL	0x08
+
+/* Audio Controls */
+#define MUTE_CONTROL		0x01
+#define VOLUME_CONTROL		0x02
+#define AUDIO_DEFAULT_CONTROL	0x0D
+
+/* Default Volume Levels */
+#define TMHW_LEV_ADJ_DECLEV_DEFAULT     0x00
+#define TMHW_LEV_ADJ_MONOLEV_DEFAULT    0x00
+#define TMHW_LEV_ADJ_NICLEV_DEFAULT     0x00
+#define TMHW_LEV_ADJ_SAPLEV_DEFAULT     0x00
+#define TMHW_LEV_ADJ_ADCLEV_DEFAULT     0x00
+
+/* Encoder Related Commands */
+#define EU_PROFILE_CONTROL		0x00
+#define EU_VIDEO_FORMAT_CONTROL		0x01
+#define EU_VIDEO_BIT_RATE_CONTROL	0x02
+#define EU_VIDEO_RESOLUTION_CONTROL	0x03
+#define EU_VIDEO_GOP_STRUCTURE_CONTROL	0x04
+#define EU_VIDEO_INPUT_ASPECT_CONTROL	0x0A
+#define EU_AUDIO_FORMAT_CONTROL		0x0C
+#define EU_AUDIO_BIT_RATE_CONTROL	0x0D
+
+/* Firmware Debugging */
+#define SET_DEBUG_LEVEL_CONTROL	0x0B
+#define GET_DEBUG_DATA_CONTROL	0x0C

linux-7.2.3/drivers/media/pci/saa7164/saa7164-types.h

@@ -0,0 +1,428 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
+ */
+
+/* TODO: Cleanup and shorten the namespace */
+
+/* Some structures are passed directly to/from the firmware and
+ * have strict alignment requirements. This is one of them.
+ */
+struct tmComResHWDescr {
+	u8	bLength;
+	u8	bDescriptorType;
+	u8	bDescriptorSubtype;
+	u16	bcdSpecVersion;
+	u32	dwClockFrequency;
+	u32	dwClockUpdateRes;
+	u8	bCapabilities;
+	u32	dwDeviceRegistersLocation;
+	u32	dwHostMemoryRegion;
+	u32	dwHostMemoryRegionSize;
+	u32	dwHostHibernatMemRegion;
+	u32	dwHostHibernatMemRegionSize;
+} __attribute__((packed));
+
+/* This is DWORD aligned on windows but I can't find the right
+ * gcc syntax to match the binary data from the device.
+ * I've manually padded with Reserved[3] bytes to match the hardware,
+ * but this could break if GCC decides to pack in a different way.
+ */
+struct tmComResInterfaceDescr {
+	u8	bLength;
+	u8	bDescriptorType;
+	u8	bDescriptorSubtype;
+	u8	bFlags;
+	u8	bInterfaceType;
+	u8	bInterfaceId;
+	u8	bBaseInterface;
+	u8	bInterruptId;
+	u8	bDebugInterruptId;
+	u8	BARLocation;
+	u8	Reserved[3];
+};
+
+struct tmComResBusDescr {
+	u64	CommandRing;
+	u64	ResponseRing;
+	u32	CommandWrite;
+	u32	CommandRead;
+	u32	ResponseWrite;
+	u32	ResponseRead;
+};
+
+enum tmBusType {
+	NONE		= 0,
+	TYPE_BUS_PCI	= 1,
+	TYPE_BUS_PCIe	= 2,
+	TYPE_BUS_USB	= 3,
+	TYPE_BUS_I2C	= 4
+};
+
+struct tmComResBusInfo {
+	enum tmBusType Type;
+	u16	m_wMaxReqSize;
+	u8 __iomem *m_pdwSetRing;
+	u32	m_dwSizeSetRing;
+	u8 __iomem *m_pdwGetRing;
+	u32	m_dwSizeGetRing;
+	u32	m_dwSetWritePos;
+	u32	m_dwSetReadPos;
+	u32	m_dwGetWritePos;
+	u32	m_dwGetReadPos;
+
+	/* All access is protected */
+	struct mutex lock;
+
+};
+
+struct tmComResInfo {
+	u8	id;
+	u8	flags;
+	u16	size;
+	u32	command;
+	u16	controlselector;
+	u8	seqno;
+} __attribute__((packed));
+
+enum tmComResCmd {
+	SET_CUR  = 0x01,
+	GET_CUR  = 0x81,
+	GET_MIN  = 0x82,
+	GET_MAX  = 0x83,
+	GET_RES  = 0x84,
+	GET_LEN  = 0x85,
+	GET_INFO = 0x86,
+	GET_DEF  = 0x87
+};
+
+struct cmd {
+	u8 seqno;
+	u32 inuse;
+	u32 timeout;
+	u32 signalled;
+	struct mutex lock;
+	wait_queue_head_t wait;
+};
+
+struct tmDescriptor {
+	u32	pathid;
+	u32	size;
+	void	*descriptor;
+};
+
+struct tmComResDescrHeader {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	unitid;
+} __attribute__((packed));
+
+struct tmComResExtDevDescrHeader {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	unitid;
+	u32	devicetype;
+	u16	deviceid;
+	u32	numgpiopins;
+	u8	numgpiogroups;
+	u8	controlsize;
+} __attribute__((packed));
+
+struct tmComResGPIO {
+	u32	pin;
+	u8	state;
+} __attribute__((packed));
+
+struct tmComResPathDescrHeader {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	pathid;
+} __attribute__((packed));
+
+/* terminaltype */
+enum tmComResTermType {
+	ITT_ANTENNA              = 0x0203,
+	LINE_CONNECTOR           = 0x0603,
+	SPDIF_CONNECTOR          = 0x0605,
+	COMPOSITE_CONNECTOR      = 0x0401,
+	SVIDEO_CONNECTOR         = 0x0402,
+	COMPONENT_CONNECTOR      = 0x0403,
+	STANDARD_DMA             = 0xF101
+};
+
+struct tmComResAntTermDescrHeader {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	terminalid;
+	u16	terminaltype;
+	u8	assocterminal;
+	u8	iterminal;
+	u8	controlsize;
+} __attribute__((packed));
+
+struct tmComResTunerDescrHeader {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	unitid;
+	u8	sourceid;
+	u8	iunit;
+	u32	tuningstandards;
+	u8	controlsize;
+	u32	controls;
+} __attribute__((packed));
+
+enum tmBufferFlag {
+	/* the buffer does not contain any valid data */
+	TM_BUFFER_FLAG_EMPTY,
+
+	/* the buffer is filled with valid data */
+	TM_BUFFER_FLAG_DONE,
+
+	/* the buffer is the dummy buffer - TODO??? */
+	TM_BUFFER_FLAG_DUMMY_BUFFER
+};
+
+struct tmBuffer {
+	u64		*pagetablevirt;
+	u64		pagetablephys;
+	u16		offset;
+	u8		*context;
+	u64		timestamp;
+	enum tmBufferFlag BufferFlag;
+	u32		lostbuffers;
+	u32		validbuffers;
+	u64		*dummypagevirt;
+	u64		dummypagephys;
+	u64		*addressvirt;
+};
+
+struct tmHWStreamParameters {
+	u32	bitspersample;
+	u32	samplesperline;
+	u32	numberoflines;
+	u32	pitch;
+	u32	linethreshold;
+	u64	**pagetablelistvirt;
+	u64	*pagetablelistphys;
+	u32	numpagetables;
+	u32	numpagetableentries;
+};
+
+struct tmStreamParameters {
+	struct tmHWStreamParameters	HWStreamParameters;
+	u64				qwDummyPageTablePhys;
+	u64				*pDummyPageTableVirt;
+};
+
+struct tmComResDMATermDescrHeader {
+	u8	len;
+	u8	type;
+	u8	subtyle;
+	u8	unitid;
+	u16	terminaltype;
+	u8	assocterminal;
+	u8	sourceid;
+	u8	iterminal;
+	u32	BARLocation;
+	u8	flags;
+	u8	interruptid;
+	u8	buffercount;
+	u8	metadatasize;
+	u8	numformats;
+	u8	controlsize;
+} __attribute__((packed));
+
+/*
+ *
+ * Description:
+ *  This is the transport stream format header.
+ *
+ * Settings:
+ *  bLength                 - The size of this descriptor in bytes.
+ *  bDescriptorType         - CS_INTERFACE.
+ *  bDescriptorSubtype      - VS_FORMAT_MPEG2TS descriptor subtype.
+ *  bFormatIndex            - A non-zero constant that uniquely identifies the
+ *                            format.
+ *  bDataOffset             - Offset to TSP packet within MPEG-2 TS transport
+ *                            stride, in bytes.
+ *  bPacketLength           - Length of TSP packet, in bytes (typically 188).
+ *  bStrideLength           - Length of MPEG-2 TS transport stride.
+ *  guidStrideFormat        - A Globally Unique Identifier indicating the
+ *                            format of the stride data (if any). Set to zeros
+ *                            if there is no Stride Data, or if the Stride
+ *                            Data is to be ignored by the application.
+ *
+ */
+struct tmComResTSFormatDescrHeader {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	bFormatIndex;
+	u8	bDataOffset;
+	u8	bPacketLength;
+	u8	bStrideLength;
+	u8	guidStrideFormat[16];
+} __attribute__((packed));
+
+/* Encoder related structures */
+
+/* A/V Mux Selector */
+struct tmComResSelDescrHeader {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	unitid;
+	u8	nrinpins;
+	u8	sourceid;
+} __attribute__((packed));
+
+/* A/V Audio processor definitions */
+struct tmComResProcDescrHeader {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	unitid;
+	u8	sourceid;
+	u16	wreserved;
+	u8	controlsize;
+} __attribute__((packed));
+
+/* Video bitrate control message */
+#define EU_VIDEO_BIT_RATE_MODE_CONSTANT		(0)
+#define EU_VIDEO_BIT_RATE_MODE_VARIABLE_AVERAGE (1)
+#define EU_VIDEO_BIT_RATE_MODE_VARIABLE_PEAK	(2)
+struct tmComResEncVideoBitRate {
+	u8	ucVideoBitRateMode;
+	u32	dwVideoBitRate;
+	u32	dwVideoBitRatePeak;
+} __attribute__((packed));
+
+/* Video Encoder Aspect Ratio message */
+struct tmComResEncVideoInputAspectRatio {
+	u8	width;
+	u8	height;
+} __attribute__((packed));
+
+/* Video Encoder GOP IBP message */
+/* 1. IPPPPPPPPPPPPPP */
+/* 2. IBPBPBPBPBPBPBP */
+/* 3. IBBPBBPBBPBBP   */
+#define SAA7164_ENCODER_DEFAULT_GOP_DIST (1)
+#define SAA7164_ENCODER_DEFAULT_GOP_SIZE (15)
+struct tmComResEncVideoGopStructure {
+	u8	ucGOPSize;	/* GOP Size 12, 15 */
+	u8	ucRefFrameDist; /* Reference Frame Distance */
+} __attribute__((packed));
+
+/* Encoder processor definition */
+struct tmComResEncoderDescrHeader {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	unitid;
+	u8	vsourceid;
+	u8	asourceid;
+	u8	iunit;
+	u32	dwmControlCap;
+	u32	dwmProfileCap;
+	u32	dwmVidFormatCap;
+	u8	bmVidBitrateCap;
+	u16	wmVidResolutionsCap;
+	u16	wmVidFrmRateCap;
+	u32	dwmAudFormatCap;
+	u8	bmAudBitrateCap;
+} __attribute__((packed));
+
+/* Audio processor definition */
+struct tmComResAFeatureDescrHeader {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	unitid;
+	u8	sourceid;
+	u8	controlsize;
+} __attribute__((packed));
+
+/* Audio control messages */
+struct tmComResAudioDefaults {
+	u8	ucDecoderLevel;
+	u8	ucDecoderFM_Level;
+	u8	ucMonoLevel;
+	u8	ucNICAM_Level;
+	u8	ucSAP_Level;
+	u8	ucADC_Level;
+} __attribute__((packed));
+
+/* Audio bitrate control message */
+struct tmComResEncAudioBitRate {
+	u8	ucAudioBitRateMode;
+	u32	dwAudioBitRate;
+	u32	dwAudioBitRatePeak;
+} __attribute__((packed));
+
+/* Tuner / AV Decoder messages */
+struct tmComResTunerStandard {
+	u8	std;
+	u32	country;
+} __attribute__((packed));
+
+struct tmComResTunerStandardAuto {
+	u8	mode;
+} __attribute__((packed));
+
+/* EEPROM definition for PS stream types */
+struct tmComResPSFormatDescrHeader {
+	u8	len;
+	u8	type;
+	u8	subtype;
+	u8	bFormatIndex;
+	u16	wPacketLength;
+	u16	wPackLength;
+	u8	bPackDataType;
+} __attribute__((packed));
+
+/* VBI control structure */
+struct tmComResVBIFormatDescrHeader {
+	u8	len;
+	u8	type;
+	u8	subtype; /* VS_FORMAT_VBI */
+	u8	bFormatIndex;
+	u32	VideoStandard; /* See KS_AnalogVideoStandard, NTSC = 1 */
+	u8	StartLine; /* NTSC Start = 10 */
+	u8	EndLine; /* NTSC = 21 */
+	u8	FieldRate; /* 60 for NTSC */
+	u8	bNumLines; /* Unused - scheduled for removal */
+} __attribute__((packed));
+
+struct tmComResProbeCommit {
+	u16	bmHint;
+	u8	bFormatIndex;
+	u8	bFrameIndex;
+} __attribute__((packed));
+
+struct tmComResDebugSetLevel {
+	u32	dwDebugLevel;
+} __attribute__((packed));
+
+struct tmComResDebugGetData {
+	u32	dwResult;
+	u8	ucDebugData[256];
+} __attribute__((packed));
+
+struct tmFwInfoStruct {
+	u32	status;
+	u32	mode;
+	u32	devicespec;
+	u32	deviceinst;
+	u32	CPULoad;
+	u32	RemainHeap;
+	u32	CPUClock;
+	u32	RAMSpeed;
+} __attribute__((packed));

linux-7.2.3/drivers/media/pci/saa7164/saa7164-vbi.c

@@ -0,0 +1,765 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
+ */
+
+#include "saa7164.h"
+
+/* Take the encoder configuration from the port struct and
+ * flush it to the hardware.
+ */
+static void saa7164_vbi_configure(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	dprintk(DBGLVL_VBI, "%s()\n", __func__);
+
+	port->vbi_params.width = port->enc_port->width;
+	port->vbi_params.height = port->enc_port->height;
+	port->vbi_params.is_50hz =
+		(port->enc_port->encodernorm.id & V4L2_STD_625_50) != 0;
+
+	/* Set up the DIF (enable it) for analog mode by default */
+	saa7164_api_initialize_dif(port);
+	dprintk(DBGLVL_VBI, "%s() ends\n", __func__);
+}
+
+static int saa7164_vbi_buffers_dealloc(struct saa7164_port *port)
+{
+	struct list_head *c, *n, *p, *q, *l, *v;
+	struct saa7164_dev *dev = port->dev;
+	struct saa7164_buffer *buf;
+	struct saa7164_user_buffer *ubuf;
+
+	/* Remove any allocated buffers */
+	mutex_lock(&port->dmaqueue_lock);
+
+	dprintk(DBGLVL_VBI, "%s(port=%d) dmaqueue\n", __func__, port->nr);
+	list_for_each_safe(c, n, &port->dmaqueue.list) {
+		buf = list_entry(c, struct saa7164_buffer, list);
+		list_del(c);
+		saa7164_buffer_dealloc(buf);
+	}
+
+	dprintk(DBGLVL_VBI, "%s(port=%d) used\n", __func__, port->nr);
+	list_for_each_safe(p, q, &port->list_buf_used.list) {
+		ubuf = list_entry(p, struct saa7164_user_buffer, list);
+		list_del(p);
+		saa7164_buffer_dealloc_user(ubuf);
+	}
+
+	dprintk(DBGLVL_VBI, "%s(port=%d) free\n", __func__, port->nr);
+	list_for_each_safe(l, v, &port->list_buf_free.list) {
+		ubuf = list_entry(l, struct saa7164_user_buffer, list);
+		list_del(l);
+		saa7164_buffer_dealloc_user(ubuf);
+	}
+
+	mutex_unlock(&port->dmaqueue_lock);
+	dprintk(DBGLVL_VBI, "%s(port=%d) done\n", __func__, port->nr);
+
+	return 0;
+}
+
+/* Dynamic buffer switch at vbi start time */
+static int saa7164_vbi_buffers_alloc(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	struct saa7164_buffer *buf;
+	struct saa7164_user_buffer *ubuf;
+	struct tmHWStreamParameters *params = &port->hw_streamingparams;
+	int result = -ENODEV, i;
+	int len = 0;
+
+	dprintk(DBGLVL_VBI, "%s()\n", __func__);
+
+	/* TODO: NTSC SPECIFIC */
+	/* Init and establish defaults */
+	params->samplesperline = 1440;
+	params->numberoflines = 18;
+	params->pitch = 1440;
+	params->numpagetables = 2 +
+		((params->numberoflines * params->pitch) / PAGE_SIZE);
+	params->bitspersample = 8;
+	params->linethreshold = 0;
+	params->pagetablelistvirt = NULL;
+	params->pagetablelistphys = NULL;
+	params->numpagetableentries = port->hwcfg.buffercount;
+
+	/* Allocate the PCI resources, buffers (hard) */
+	for (i = 0; i < port->hwcfg.buffercount; i++) {
+		buf = saa7164_buffer_alloc(port,
+			params->numberoflines *
+			params->pitch);
+
+		if (!buf) {
+			printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n",
+				__func__, result);
+			result = -ENOMEM;
+			goto failed;
+		} else {
+
+			mutex_lock(&port->dmaqueue_lock);
+			list_add_tail(&buf->list, &port->dmaqueue.list);
+			mutex_unlock(&port->dmaqueue_lock);
+
+		}
+	}
+
+	/* Allocate some kernel buffers for copying
+	 * to userpsace.
+	 */
+	len = params->numberoflines * params->pitch;
+
+	if (vbi_buffers < 16)
+		vbi_buffers = 16;
+	if (vbi_buffers > 512)
+		vbi_buffers = 512;
+
+	for (i = 0; i < vbi_buffers; i++) {
+
+		ubuf = saa7164_buffer_alloc_user(dev, len);
+		if (ubuf) {
+			mutex_lock(&port->dmaqueue_lock);
+			list_add_tail(&ubuf->list, &port->list_buf_free.list);
+			mutex_unlock(&port->dmaqueue_lock);
+		}
+
+	}
+
+	result = 0;
+
+failed:
+	return result;
+}
+
+
+static int saa7164_vbi_initialize(struct saa7164_port *port)
+{
+	saa7164_vbi_configure(port);
+	return 0;
+}
+
+/* -- V4L2 --------------------------------------------------------- */
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id)
+{
+	struct saa7164_vbi_fh *fh = to_saa7164_vbi_fh(file);
+
+	return saa7164_s_std(fh->port->enc_port, id);
+}
+
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id)
+{
+	struct saa7164_vbi_fh *fh = to_saa7164_vbi_fh(file);
+
+	return saa7164_g_std(fh->port->enc_port, id);
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	struct saa7164_vbi_fh *fh = to_saa7164_vbi_fh(file);
+
+	return saa7164_g_input(fh->port->enc_port, i);
+}
+
+static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+	struct saa7164_vbi_fh *fh = to_saa7164_vbi_fh(file);
+
+	return saa7164_s_input(fh->port->enc_port, i);
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+	struct v4l2_frequency *f)
+{
+	struct saa7164_vbi_fh *fh = to_saa7164_vbi_fh(file);
+
+	return saa7164_g_frequency(fh->port->enc_port, f);
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+	const struct v4l2_frequency *f)
+{
+	struct saa7164_vbi_fh *fh = to_saa7164_vbi_fh(file);
+	int ret = saa7164_s_frequency(fh->port->enc_port, f);
+
+	if (ret == 0)
+		saa7164_vbi_initialize(fh->port);
+	return ret;
+}
+
+static int vidioc_querycap(struct file *file, void  *priv,
+	struct v4l2_capability *cap)
+{
+	struct saa7164_vbi_fh *fh = to_saa7164_vbi_fh(file);
+	struct saa7164_port *port = fh->port;
+	struct saa7164_dev *dev = port->dev;
+
+	strscpy(cap->driver, dev->name, sizeof(cap->driver));
+	strscpy(cap->card, saa7164_boards[dev->board].name,
+		sizeof(cap->card));
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+			    V4L2_CAP_TUNER | V4L2_CAP_VBI_CAPTURE |
+			    V4L2_CAP_DEVICE_CAPS;
+	return 0;
+}
+
+static int saa7164_vbi_stop_port(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	int ret;
+
+	ret = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
+	if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n",
+			__func__, ret);
+		ret = -EIO;
+	} else {
+		dprintk(DBGLVL_VBI, "%s()    Stopped\n", __func__);
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int saa7164_vbi_acquire_port(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	int ret;
+
+	ret = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE);
+	if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n",
+			__func__, ret);
+		ret = -EIO;
+	} else {
+		dprintk(DBGLVL_VBI, "%s() Acquired\n", __func__);
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int saa7164_vbi_pause_port(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	int ret;
+
+	ret = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE);
+	if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n",
+			__func__, ret);
+		ret = -EIO;
+	} else {
+		dprintk(DBGLVL_VBI, "%s()   Paused\n", __func__);
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* Firmware is very windows centric, meaning you have to transition
+ * the part through AVStream / KS Windows stages, forwards or backwards.
+ * States are: stopped, acquired (h/w), paused, started.
+ * We have to leave here will all of the soft buffers on the free list,
+ * else the cfg_post() func won't have soft buffers to correctly configure.
+ */
+static int saa7164_vbi_stop_streaming(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	struct saa7164_buffer *buf;
+	struct saa7164_user_buffer *ubuf;
+	struct list_head *c, *n;
+	int ret;
+
+	dprintk(DBGLVL_VBI, "%s(port=%d)\n", __func__, port->nr);
+
+	ret = saa7164_vbi_pause_port(port);
+	ret = saa7164_vbi_acquire_port(port);
+	ret = saa7164_vbi_stop_port(port);
+
+	dprintk(DBGLVL_VBI, "%s(port=%d) Hardware stopped\n", __func__,
+		port->nr);
+
+	/* Reset the state of any allocated buffer resources */
+	mutex_lock(&port->dmaqueue_lock);
+
+	/* Reset the hard and soft buffer state */
+	list_for_each_safe(c, n, &port->dmaqueue.list) {
+		buf = list_entry(c, struct saa7164_buffer, list);
+		buf->flags = SAA7164_BUFFER_FREE;
+		buf->pos = 0;
+	}
+
+	list_for_each_safe(c, n, &port->list_buf_used.list) {
+		ubuf = list_entry(c, struct saa7164_user_buffer, list);
+		ubuf->pos = 0;
+		list_move_tail(&ubuf->list, &port->list_buf_free.list);
+	}
+
+	mutex_unlock(&port->dmaqueue_lock);
+
+	/* Free any allocated resources */
+	saa7164_vbi_buffers_dealloc(port);
+
+	dprintk(DBGLVL_VBI, "%s(port=%d) Released\n", __func__, port->nr);
+
+	return ret;
+}
+
+static int saa7164_vbi_start_streaming(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	int result, ret = 0;
+
+	dprintk(DBGLVL_VBI, "%s(port=%d)\n", __func__, port->nr);
+
+	port->done_first_interrupt = 0;
+
+	/* allocate all of the PCIe DMA buffer resources on the fly,
+	 * allowing switching between TS and PS payloads without
+	 * requiring a complete driver reload.
+	 */
+	saa7164_vbi_buffers_alloc(port);
+
+	/* Configure the encoder with any cache values */
+#if 0
+	saa7164_api_set_encoder(port);
+	saa7164_api_get_encoder(port);
+#endif
+
+	/* Place the empty buffers on the hardware */
+	saa7164_buffer_cfg_port(port);
+
+	/* Negotiate format */
+	if (saa7164_api_set_vbi_format(port) != SAA_OK) {
+		printk(KERN_ERR "%s() No supported VBI format\n", __func__);
+		ret = -EIO;
+		goto out;
+	}
+
+	/* Acquire the hardware */
+	result = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE);
+	if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n",
+			__func__, result);
+
+		ret = -EIO;
+		goto out;
+	} else
+		dprintk(DBGLVL_VBI, "%s()   Acquired\n", __func__);
+
+	/* Pause the hardware */
+	result = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE);
+	if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n",
+				__func__, result);
+
+		/* Stop the hardware, regardless */
+		result = saa7164_vbi_stop_port(port);
+		if (result != SAA_OK) {
+			printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n",
+			       __func__, result);
+		}
+
+		ret = -EIO;
+		goto out;
+	} else
+		dprintk(DBGLVL_VBI, "%s()   Paused\n", __func__);
+
+	/* Start the hardware */
+	result = saa7164_api_transition_port(port, SAA_DMASTATE_RUN);
+	if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
+		printk(KERN_ERR "%s() run transition failed, result = 0x%x\n",
+				__func__, result);
+
+		/* Stop the hardware, regardless */
+		result = saa7164_vbi_acquire_port(port);
+		result = saa7164_vbi_stop_port(port);
+		if (result != SAA_OK) {
+			printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n",
+			       __func__, result);
+		}
+
+		ret = -EIO;
+	} else
+		dprintk(DBGLVL_VBI, "%s()   Running\n", __func__);
+
+out:
+	return ret;
+}
+
+static int saa7164_vbi_fmt(struct file *file, void *priv,
+			   struct v4l2_format *f)
+{
+	/* ntsc */
+	f->fmt.vbi.samples_per_line = 1440;
+	f->fmt.vbi.sampling_rate = 27000000;
+	f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
+	f->fmt.vbi.offset = 0;
+	f->fmt.vbi.flags = 0;
+	f->fmt.vbi.start[0] = 10;
+	f->fmt.vbi.count[0] = 18;
+	f->fmt.vbi.start[1] = 263 + 10 + 1;
+	f->fmt.vbi.count[1] = 18;
+	memset(f->fmt.vbi.reserved, 0, sizeof(f->fmt.vbi.reserved));
+	return 0;
+}
+
+static int fops_open(struct file *file)
+{
+	struct saa7164_dev *dev;
+	struct saa7164_port *port;
+	struct saa7164_vbi_fh *fh;
+
+	port = (struct saa7164_port *)video_get_drvdata(video_devdata(file));
+	if (!port)
+		return -ENODEV;
+
+	dev = port->dev;
+
+	dprintk(DBGLVL_VBI, "%s()\n", __func__);
+
+	/* allocate + initialize per filehandle data */
+	fh = kzalloc_obj(*fh);
+	if (NULL == fh)
+		return -ENOMEM;
+
+	fh->port = port;
+	v4l2_fh_init(&fh->fh, video_devdata(file));
+	v4l2_fh_add(&fh->fh, file);
+
+	return 0;
+}
+
+static int fops_release(struct file *file)
+{
+	struct saa7164_vbi_fh *fh = to_saa7164_vbi_fh(file);
+	struct saa7164_port *port = fh->port;
+	struct saa7164_dev *dev = port->dev;
+
+	dprintk(DBGLVL_VBI, "%s()\n", __func__);
+
+	/* Shut device down on last close */
+	if (atomic_cmpxchg(&fh->v4l_reading, 1, 0) == 1) {
+		if (atomic_dec_return(&port->v4l_reader_count) == 0) {
+			/* stop vbi capture then cancel buffers */
+			saa7164_vbi_stop_streaming(port);
+		}
+	}
+
+	v4l2_fh_del(&fh->fh, file);
+	v4l2_fh_exit(&fh->fh);
+	kfree(fh);
+
+	return 0;
+}
+
+static struct
+saa7164_user_buffer *saa7164_vbi_next_buf(struct saa7164_port *port)
+{
+	struct saa7164_user_buffer *ubuf = NULL;
+	struct saa7164_dev *dev = port->dev;
+	u32 crc;
+
+	mutex_lock(&port->dmaqueue_lock);
+	if (!list_empty(&port->list_buf_used.list)) {
+		ubuf = list_first_entry(&port->list_buf_used.list,
+			struct saa7164_user_buffer, list);
+
+		if (crc_checking) {
+			crc = crc32(0, ubuf->data, ubuf->actual_size);
+			if (crc != ubuf->crc) {
+				printk(KERN_ERR "%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n",
+					__func__,
+					ubuf, ubuf->crc, crc);
+			}
+		}
+
+	}
+	mutex_unlock(&port->dmaqueue_lock);
+
+	dprintk(DBGLVL_VBI, "%s() returns %p\n", __func__, ubuf);
+
+	return ubuf;
+}
+
+static ssize_t fops_read(struct file *file, char __user *buffer,
+	size_t count, loff_t *pos)
+{
+	struct saa7164_vbi_fh *fh = to_saa7164_vbi_fh(file);
+	struct saa7164_port *port = fh->port;
+	struct saa7164_user_buffer *ubuf = NULL;
+	struct saa7164_dev *dev = port->dev;
+	int ret = 0;
+	int rem, cnt;
+	u8 *p;
+
+	port->last_read_msecs_diff = port->last_read_msecs;
+	port->last_read_msecs = jiffies_to_msecs(jiffies);
+	port->last_read_msecs_diff = port->last_read_msecs -
+		port->last_read_msecs_diff;
+
+	saa7164_histogram_update(&port->read_interval,
+		port->last_read_msecs_diff);
+
+	if (*pos) {
+		printk(KERN_ERR "%s() ESPIPE\n", __func__);
+		return -ESPIPE;
+	}
+
+	if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) {
+		if (atomic_inc_return(&port->v4l_reader_count) == 1) {
+
+			if (saa7164_vbi_initialize(port) < 0) {
+				printk(KERN_ERR "%s() EINVAL\n", __func__);
+				return -EINVAL;
+			}
+
+			saa7164_vbi_start_streaming(port);
+			msleep(200);
+		}
+	}
+
+	/* blocking wait for buffer */
+	if ((file->f_flags & O_NONBLOCK) == 0) {
+		if (wait_event_interruptible(port->wait_read,
+			saa7164_vbi_next_buf(port))) {
+				printk(KERN_ERR "%s() ERESTARTSYS\n", __func__);
+				return -ERESTARTSYS;
+		}
+	}
+
+	/* Pull the first buffer from the used list */
+	ubuf = saa7164_vbi_next_buf(port);
+
+	while ((count > 0) && ubuf) {
+
+		/* set remaining bytes to copy */
+		rem = ubuf->actual_size - ubuf->pos;
+		cnt = rem > count ? count : rem;
+
+		p = ubuf->data + ubuf->pos;
+
+		dprintk(DBGLVL_VBI,
+			"%s() count=%d cnt=%d rem=%d buf=%p buf->pos=%d\n",
+			__func__, (int)count, cnt, rem, ubuf, ubuf->pos);
+
+		if (copy_to_user(buffer, p, cnt)) {
+			printk(KERN_ERR "%s() copy_to_user failed\n", __func__);
+			if (!ret) {
+				printk(KERN_ERR "%s() EFAULT\n", __func__);
+				ret = -EFAULT;
+			}
+			goto err;
+		}
+
+		ubuf->pos += cnt;
+		count -= cnt;
+		buffer += cnt;
+		ret += cnt;
+
+		if (ubuf->pos > ubuf->actual_size)
+			printk(KERN_ERR "read() pos > actual, huh?\n");
+
+		if (ubuf->pos == ubuf->actual_size) {
+
+			/* finished with current buffer, take next buffer */
+
+			/* Requeue the buffer on the free list */
+			ubuf->pos = 0;
+
+			mutex_lock(&port->dmaqueue_lock);
+			list_move_tail(&ubuf->list, &port->list_buf_free.list);
+			mutex_unlock(&port->dmaqueue_lock);
+
+			/* Dequeue next */
+			if ((file->f_flags & O_NONBLOCK) == 0) {
+				if (wait_event_interruptible(port->wait_read,
+					saa7164_vbi_next_buf(port))) {
+						break;
+				}
+			}
+			ubuf = saa7164_vbi_next_buf(port);
+		}
+	}
+err:
+	if (!ret && !ubuf) {
+		printk(KERN_ERR "%s() EAGAIN\n", __func__);
+		ret = -EAGAIN;
+	}
+
+	return ret;
+}
+
+static __poll_t fops_poll(struct file *file, poll_table *wait)
+{
+	struct saa7164_vbi_fh *fh = to_saa7164_vbi_fh(file);
+	struct saa7164_port *port = fh->port;
+	__poll_t mask = 0;
+
+	port->last_poll_msecs_diff = port->last_poll_msecs;
+	port->last_poll_msecs = jiffies_to_msecs(jiffies);
+	port->last_poll_msecs_diff = port->last_poll_msecs -
+		port->last_poll_msecs_diff;
+
+	saa7164_histogram_update(&port->poll_interval,
+		port->last_poll_msecs_diff);
+
+	if (!video_is_registered(port->v4l_device))
+		return EPOLLERR;
+
+	if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) {
+		if (atomic_inc_return(&port->v4l_reader_count) == 1) {
+			if (saa7164_vbi_initialize(port) < 0)
+				return EPOLLERR;
+			saa7164_vbi_start_streaming(port);
+			msleep(200);
+		}
+	}
+
+	/* blocking wait for buffer */
+	if ((file->f_flags & O_NONBLOCK) == 0) {
+		if (wait_event_interruptible(port->wait_read,
+			saa7164_vbi_next_buf(port))) {
+				return EPOLLERR;
+		}
+	}
+
+	/* Pull the first buffer from the used list */
+	if (!list_empty(&port->list_buf_used.list))
+		mask |= EPOLLIN | EPOLLRDNORM;
+
+	return mask;
+}
+static const struct v4l2_file_operations vbi_fops = {
+	.owner		= THIS_MODULE,
+	.open		= fops_open,
+	.release	= fops_release,
+	.read		= fops_read,
+	.poll		= fops_poll,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops vbi_ioctl_ops = {
+	.vidioc_s_std		 = vidioc_s_std,
+	.vidioc_g_std		 = vidioc_g_std,
+	.vidioc_enum_input	 = saa7164_enum_input,
+	.vidioc_g_input		 = vidioc_g_input,
+	.vidioc_s_input		 = vidioc_s_input,
+	.vidioc_g_tuner		 = saa7164_g_tuner,
+	.vidioc_s_tuner		 = saa7164_s_tuner,
+	.vidioc_g_frequency	 = vidioc_g_frequency,
+	.vidioc_s_frequency	 = vidioc_s_frequency,
+	.vidioc_querycap	 = vidioc_querycap,
+	.vidioc_g_fmt_vbi_cap	 = saa7164_vbi_fmt,
+	.vidioc_try_fmt_vbi_cap	 = saa7164_vbi_fmt,
+	.vidioc_s_fmt_vbi_cap	 = saa7164_vbi_fmt,
+};
+
+static struct video_device saa7164_vbi_template = {
+	.name          = "saa7164",
+	.fops          = &vbi_fops,
+	.ioctl_ops     = &vbi_ioctl_ops,
+	.minor         = -1,
+	.tvnorms       = SAA7164_NORMS,
+	.device_caps   = V4L2_CAP_VBI_CAPTURE | V4L2_CAP_READWRITE |
+			 V4L2_CAP_TUNER,
+};
+
+static struct video_device *saa7164_vbi_alloc(
+	struct saa7164_port *port,
+	struct pci_dev *pci,
+	struct video_device *template,
+	char *type)
+{
+	struct video_device *vfd;
+	struct saa7164_dev *dev = port->dev;
+
+	dprintk(DBGLVL_VBI, "%s()\n", __func__);
+
+	vfd = video_device_alloc();
+	if (NULL == vfd)
+		return NULL;
+
+	*vfd = *template;
+	snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name,
+		type, saa7164_boards[dev->board].name);
+
+	vfd->v4l2_dev  = &dev->v4l2_dev;
+	vfd->release = video_device_release;
+	return vfd;
+}
+
+int saa7164_vbi_register(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+	int result = -ENODEV;
+
+	dprintk(DBGLVL_VBI, "%s()\n", __func__);
+
+	BUG_ON(port->type != SAA7164_MPEG_VBI);
+
+	/* Sanity check that the PCI configuration space is active */
+	if (port->hwcfg.BARLocation == 0) {
+		printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n",
+			__func__, result);
+		result = -ENOMEM;
+		goto failed;
+	}
+
+	/* Establish VBI defaults here */
+
+	/* Allocate and register the video device node */
+	port->v4l_device = saa7164_vbi_alloc(port,
+		dev->pci, &saa7164_vbi_template, "vbi");
+
+	if (!port->v4l_device) {
+		printk(KERN_INFO "%s: can't allocate vbi device\n",
+			dev->name);
+		result = -ENOMEM;
+		goto failed;
+	}
+
+	port->enc_port = &dev->ports[port->nr - 2];
+	video_set_drvdata(port->v4l_device, port);
+	result = video_register_device(port->v4l_device,
+		VFL_TYPE_VBI, -1);
+	if (result < 0) {
+		printk(KERN_INFO "%s: can't register vbi device\n",
+			dev->name);
+		/* TODO: We're going to leak here if we don't dealloc
+		 The buffers above. The unreg function can't deal wit it.
+		*/
+		goto failed;
+	}
+
+	printk(KERN_INFO "%s: registered device vbi%d [vbi]\n",
+		dev->name, port->v4l_device->num);
+
+	/* Configure the hardware defaults */
+
+	result = 0;
+failed:
+	return result;
+}
+
+void saa7164_vbi_unregister(struct saa7164_port *port)
+{
+	struct saa7164_dev *dev = port->dev;
+
+	dprintk(DBGLVL_VBI, "%s(port=%d)\n", __func__, port->nr);
+
+	BUG_ON(port->type != SAA7164_MPEG_VBI);
+
+	if (port->v4l_device) {
+		if (port->v4l_device->minor != -1)
+			video_unregister_device(port->v4l_device);
+		else
+			video_device_release(port->v4l_device);
+
+		port->v4l_device = NULL;
+	}
+
+}

linux-7.2.3/drivers/media/pci/saa7164/saa7164.h

@@ -0,0 +1,629 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
+ */
+
+/*
+	Driver architecture
+	*******************
+
+	saa7164_core.c/buffer.c/cards.c/i2c.c/dvb.c
+		|	: Standard Linux driver framework for creating
+		|	: exposing and managing interfaces to the rest
+		|	: of the kernel or userland. Also uses _fw.c to load
+		|	: firmware direct into the PCIe bus, bypassing layers.
+		V
+	saa7164_api..()	: Translate kernel specific functions/features
+		|	: into command buffers.
+		V
+	saa7164_cmd..()	: Manages the flow of command packets on/off,
+		|	: the bus. Deal with bus errors, timeouts etc.
+		V
+	saa7164_bus..() : Manage a read/write memory ring buffer in the
+		|	: PCIe Address space.
+		|
+		|		saa7164_fw...()	: Load any firmware
+		|			|	: direct into the device
+		V			V
+	<- ----------------- PCIe address space -------------------- ->
+*/
+
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/kdev_t.h>
+#include <linux/mutex.h>
+#include <linux/crc32.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+
+#include <media/tuner.h>
+#include <media/tveeprom.h>
+#include <media/dvb_demux.h>
+#include <media/dvb_frontend.h>
+#include <media/dvb_net.h>
+#include <media/dvbdev.h>
+#include <media/dmxdev.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+
+#include "saa7164-reg.h"
+#include "saa7164-types.h"
+
+#define SAA7164_MAXBOARDS 8
+
+#define UNSET (-1U)
+#define SAA7164_BOARD_NOAUTO			UNSET
+#define SAA7164_BOARD_UNKNOWN			0
+#define SAA7164_BOARD_UNKNOWN_REV2		1
+#define SAA7164_BOARD_UNKNOWN_REV3		2
+#define SAA7164_BOARD_HAUPPAUGE_HVR2250		3
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200		4
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_2	5
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_3	6
+#define SAA7164_BOARD_HAUPPAUGE_HVR2250_2	7
+#define SAA7164_BOARD_HAUPPAUGE_HVR2250_3	8
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_4	9
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_5	10
+#define SAA7164_BOARD_HAUPPAUGE_HVR2255proto	11
+#define SAA7164_BOARD_HAUPPAUGE_HVR2255		12
+#define SAA7164_BOARD_HAUPPAUGE_HVR2205		13
+
+#define SAA7164_MAX_UNITS		8
+#define SAA7164_TS_NUMBER_OF_LINES	312
+#define SAA7164_PS_NUMBER_OF_LINES	256
+#define SAA7164_PT_ENTRIES		16 /* (312 * 188) / 4096 */
+#define SAA7164_MAX_ENCODER_BUFFERS	64 /* max 5secs of latency at 6Mbps */
+#define SAA7164_MAX_VBI_BUFFERS		64
+
+/* Port related defines */
+#define SAA7164_PORT_TS1	(0)
+#define SAA7164_PORT_TS2	(SAA7164_PORT_TS1 + 1)
+#define SAA7164_PORT_ENC1	(SAA7164_PORT_TS2 + 1)
+#define SAA7164_PORT_ENC2	(SAA7164_PORT_ENC1 + 1)
+#define SAA7164_PORT_VBI1	(SAA7164_PORT_ENC2 + 1)
+#define SAA7164_PORT_VBI2	(SAA7164_PORT_VBI1 + 1)
+#define SAA7164_MAX_PORTS	(SAA7164_PORT_VBI2 + 1)
+
+#define DBGLVL_FW    4
+#define DBGLVL_DVB   8
+#define DBGLVL_I2C  16
+#define DBGLVL_API  32
+#define DBGLVL_CMD  64
+#define DBGLVL_BUS 128
+#define DBGLVL_IRQ 256
+#define DBGLVL_BUF 512
+#define DBGLVL_ENC 1024
+#define DBGLVL_VBI 2048
+#define DBGLVL_THR 4096
+#define DBGLVL_CPU 8192
+
+#define SAA7164_NORMS \
+	(V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP)
+
+/* TV frequency range copied from tuner-core.c */
+#define SAA7164_TV_MIN_FREQ (44U * 16U)
+#define SAA7164_TV_MAX_FREQ (958U * 16U)
+
+enum port_t {
+	SAA7164_MPEG_UNDEFINED = 0,
+	SAA7164_MPEG_DVB,
+	SAA7164_MPEG_ENCODER,
+	SAA7164_MPEG_VBI,
+};
+
+enum saa7164_i2c_bus_nr {
+	SAA7164_I2C_BUS_0 = 0,
+	SAA7164_I2C_BUS_1,
+	SAA7164_I2C_BUS_2,
+};
+
+enum saa7164_buffer_flags {
+	SAA7164_BUFFER_UNDEFINED = 0,
+	SAA7164_BUFFER_FREE,
+	SAA7164_BUFFER_BUSY,
+	SAA7164_BUFFER_FULL
+};
+
+enum saa7164_unit_type {
+	SAA7164_UNIT_UNDEFINED = 0,
+	SAA7164_UNIT_DIGITAL_DEMODULATOR,
+	SAA7164_UNIT_ANALOG_DEMODULATOR,
+	SAA7164_UNIT_TUNER,
+	SAA7164_UNIT_EEPROM,
+	SAA7164_UNIT_ZILOG_IRBLASTER,
+	SAA7164_UNIT_ENCODER,
+};
+
+/* The PCIe bridge doesn't grant direct access to i2c.
+ * Instead, you address i2c devices using a uniqely
+ * allocated 'unitid' value via a messaging API. This
+ * is a problem. The kernel and existing demod/tuner
+ * drivers expect to talk 'i2c', so we have to maintain
+ * a translation layer, and a series of functions to
+ * convert i2c bus + device address into a unit id.
+ */
+struct saa7164_unit {
+	enum saa7164_unit_type type;
+	u8	id;
+	char	*name;
+	enum saa7164_i2c_bus_nr i2c_bus_nr;
+	u8	i2c_bus_addr;
+	u8	i2c_reg_len;
+};
+
+struct saa7164_board {
+	char	*name;
+	enum port_t porta, portb, portc,
+		portd, porte, portf;
+	enum {
+		SAA7164_CHIP_UNDEFINED = 0,
+		SAA7164_CHIP_REV2,
+		SAA7164_CHIP_REV3,
+	} chiprev;
+	struct	saa7164_unit unit[SAA7164_MAX_UNITS];
+};
+
+struct saa7164_subid {
+	u16     subvendor;
+	u16     subdevice;
+	u32     card;
+};
+
+struct saa7164_encoder_fh {
+	struct v4l2_fh fh;
+	struct saa7164_port *port;
+	atomic_t v4l_reading;
+};
+
+static inline struct saa7164_encoder_fh *to_saa7164_encoder_fh(struct file *filp)
+{
+	return container_of(file_to_v4l2_fh(filp), struct saa7164_encoder_fh, fh);
+}
+
+struct saa7164_vbi_fh {
+	struct v4l2_fh fh;
+	struct saa7164_port *port;
+	atomic_t v4l_reading;
+};
+
+static inline struct saa7164_vbi_fh *to_saa7164_vbi_fh(struct file *filp)
+{
+	return container_of(file_to_v4l2_fh(filp), struct saa7164_vbi_fh, fh);
+}
+
+struct saa7164_histogram_bucket {
+	u32 val;
+	u32 count;
+	u64 update_time;
+};
+
+struct saa7164_histogram {
+	char name[32];
+	struct saa7164_histogram_bucket counter1[64];
+};
+
+struct saa7164_user_buffer {
+	struct list_head list;
+
+	/* Attributes */
+	u8  *data;
+	u32 pos;
+	u32 actual_size;
+
+	u32 crc;
+};
+
+struct saa7164_fw_status {
+
+	/* RISC Core details */
+	u32	status;
+	u32	mode;
+	u32	spec;
+	u32	inst;
+	u32	cpuload;
+	u32	remainheap;
+
+	/* Firmware version */
+	u32	version;
+	u32	major;
+	u32	sub;
+	u32	rel;
+	u32	buildnr;
+};
+
+struct saa7164_dvb {
+	struct mutex lock;
+	struct dvb_adapter adapter;
+	struct dvb_frontend *frontend;
+	struct dvb_demux demux;
+	struct dmxdev dmxdev;
+	struct dmx_frontend fe_hw;
+	struct dmx_frontend fe_mem;
+	struct dvb_net net;
+	int feeding;
+};
+
+struct saa7164_i2c {
+	struct saa7164_dev		*dev;
+
+	enum saa7164_i2c_bus_nr		nr;
+
+	/* I2C I/O */
+	struct i2c_adapter		i2c_adap;
+	struct i2c_client		i2c_client;
+	u32				i2c_rc;
+};
+
+struct saa7164_tvnorm {
+	char		*name;
+	v4l2_std_id	id;
+};
+
+struct saa7164_encoder_params {
+	struct saa7164_tvnorm encodernorm;
+	u32 height;
+	u32 width;
+	u32 is_50hz;
+	u32 bitrate; /* bps */
+	u32 bitrate_peak; /* bps */
+	u32 bitrate_mode;
+	u32 stream_type; /* V4L2_MPEG_STREAM_TYPE_MPEG2_TS */
+
+	u32 audio_sampling_freq;
+	u32 ctl_mute;
+	u32 ctl_aspect;
+	u32 refdist;
+	u32 gop_size;
+};
+
+struct saa7164_vbi_params {
+	struct saa7164_tvnorm encodernorm;
+	u32 height;
+	u32 width;
+	u32 is_50hz;
+	u32 bitrate; /* bps */
+	u32 bitrate_peak; /* bps */
+	u32 bitrate_mode;
+	u32 stream_type; /* V4L2_MPEG_STREAM_TYPE_MPEG2_TS */
+
+	u32 audio_sampling_freq;
+	u32 ctl_mute;
+	u32 ctl_aspect;
+	u32 refdist;
+	u32 gop_size;
+};
+
+struct saa7164_port;
+
+struct saa7164_buffer {
+	struct list_head list;
+
+	/* Note of which h/w buffer list index position we occupy */
+	int idx;
+
+	struct saa7164_port *port;
+
+	/* Hardware Specific */
+	/* PCI Memory allocations */
+	enum saa7164_buffer_flags flags; /* Free, Busy, Full */
+
+	/* A block of page align PCI memory */
+	u32 pci_size;	/* PCI allocation size in bytes */
+	u64 *cpu;	/* Virtual address */
+	dma_addr_t dma;	/* Physical address */
+	u32 crc;	/* Checksum for the entire buffer data */
+
+	/* A page table that splits the block into a number of entries */
+	u32 pt_size;		/* PCI allocation size in bytes */
+	u64 *pt_cpu;		/* Virtual address */
+	dma_addr_t pt_dma;	/* Physical address */
+
+	/* Encoder fops */
+	u32 pos;
+	u32 actual_size;
+};
+
+struct saa7164_port {
+
+	struct saa7164_dev *dev;
+	enum port_t type;
+	int nr;
+
+	/* --- Generic port attributes --- */
+
+	/* HW stream parameters */
+	struct tmHWStreamParameters hw_streamingparams;
+
+	/* DMA configuration values, is seeded during initialization */
+	struct tmComResDMATermDescrHeader hwcfg;
+
+	/* hardware specific registers */
+	u32 bufcounter;
+	u32 pitch;
+	u32 bufsize;
+	u32 bufoffset;
+	u32 bufptr32l;
+	u32 bufptr32h;
+	u64 bufptr64;
+
+	u32 numpte;	/* Number of entries in array, only valid in head */
+
+	struct mutex dmaqueue_lock;
+	struct saa7164_buffer dmaqueue;
+
+	u64 last_irq_msecs, last_svc_msecs;
+	u64 last_irq_msecs_diff, last_svc_msecs_diff;
+	u32 last_svc_wp;
+	u32 last_svc_rp;
+	u64 last_irq_svc_msecs_diff;
+	u64 last_read_msecs, last_read_msecs_diff;
+	u64 last_poll_msecs, last_poll_msecs_diff;
+
+	struct saa7164_histogram irq_interval;
+	struct saa7164_histogram svc_interval;
+	struct saa7164_histogram irq_svc_interval;
+	struct saa7164_histogram read_interval;
+	struct saa7164_histogram poll_interval;
+
+	/* --- DVB Transport Specific --- */
+	struct saa7164_dvb dvb;
+	struct i2c_client *i2c_client_demod;
+	struct i2c_client *i2c_client_tuner;
+
+	/* --- Encoder/V4L related attributes --- */
+	/* Encoder */
+	/* Defaults established in saa7164-encoder.c */
+	struct saa7164_tvnorm encodernorm;
+	struct v4l2_ctrl_handler ctrl_handler;
+	v4l2_std_id std;
+	u32 height;
+	u32 width;
+	u32 freq;
+	u8 mux_input;
+	u8 encoder_profile;
+	u8 video_format;
+	u8 audio_format;
+	u8 video_resolution;
+	u16 ctl_brightness;
+	u16 ctl_contrast;
+	u16 ctl_hue;
+	u16 ctl_saturation;
+	u16 ctl_sharpness;
+	s8 ctl_volume;
+
+	struct tmComResAFeatureDescrHeader audfeat;
+	struct tmComResEncoderDescrHeader encunit;
+	struct tmComResProcDescrHeader vidproc;
+	struct tmComResExtDevDescrHeader ifunit;
+	struct tmComResTunerDescrHeader tunerunit;
+
+	struct work_struct workenc;
+
+	/* V4L Encoder Video */
+	struct saa7164_encoder_params encoder_params;
+	struct video_device *v4l_device;
+	atomic_t v4l_reader_count;
+
+	struct saa7164_buffer list_buf_used;
+	struct saa7164_buffer list_buf_free;
+	wait_queue_head_t wait_read;
+
+	/* V4L VBI */
+	struct tmComResVBIFormatDescrHeader vbi_fmt_ntsc;
+	struct saa7164_vbi_params vbi_params;
+	struct saa7164_port *enc_port;
+
+	/* Debug */
+	u32 sync_errors;
+	u32 v_cc_errors;
+	u32 a_cc_errors;
+	u8 last_v_cc;
+	u8 last_a_cc;
+	u32 done_first_interrupt;
+};
+
+struct saa7164_dev {
+	struct list_head	devlist;
+	atomic_t		refcount;
+
+	struct v4l2_device v4l2_dev;
+
+	/* pci stuff */
+	struct pci_dev	*pci;
+	unsigned char	pci_rev, pci_lat;
+	int		pci_bus, pci_slot;
+	u32		__iomem *lmmio;
+	u8		__iomem *bmmio;
+	u32		__iomem *lmmio2;
+	u8		__iomem *bmmio2;
+	int		pci_irqmask;
+
+	/* board details */
+	int	nr;
+	int	hwrevision;
+	u32	board;
+	char	name[16];
+
+	/* firmware status */
+	struct saa7164_fw_status	fw_status;
+	u32				firmwareloaded;
+
+	struct tmComResHWDescr		hwdesc;
+	struct tmComResInterfaceDescr	intfdesc;
+	struct tmComResBusDescr		busdesc;
+
+	struct tmComResBusInfo		bus;
+
+	/* Interrupt status and ack registers */
+	u32 int_status;
+	u32 int_ack;
+	bool msi;
+
+	struct cmd			cmds[SAA_CMD_MAX_MSG_UNITS];
+	struct mutex			lock;
+
+	/* I2c related */
+	struct saa7164_i2c i2c_bus[3];
+
+	/* Transport related */
+	struct saa7164_port ports[SAA7164_MAX_PORTS];
+
+	/* Deferred command/api interrupts handling */
+	struct work_struct workcmd;
+
+	/* A kernel thread to monitor the firmware log, used
+	 * only in debug mode.
+	 */
+	struct task_struct *kthread;
+
+};
+
+extern struct list_head saa7164_devlist;
+extern unsigned int waitsecs;
+extern unsigned int encoder_buffers;
+extern unsigned int vbi_buffers;
+
+/* ----------------------------------------------------------- */
+/* saa7164-core.c                                              */
+void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr);
+void saa7164_getfirmwarestatus(struct saa7164_dev *dev);
+u32 saa7164_getcurrentfirmwareversion(struct saa7164_dev *dev);
+void saa7164_histogram_update(struct saa7164_histogram *hg, u32 val);
+
+/* ----------------------------------------------------------- */
+/* saa7164-fw.c                                                */
+int saa7164_downloadfirmware(struct saa7164_dev *dev);
+
+/* ----------------------------------------------------------- */
+/* saa7164-i2c.c                                               */
+extern int saa7164_i2c_register(struct saa7164_i2c *bus);
+extern int saa7164_i2c_unregister(struct saa7164_i2c *bus);
+
+/* ----------------------------------------------------------- */
+/* saa7164-bus.c                                               */
+int saa7164_bus_setup(struct saa7164_dev *dev);
+void saa7164_bus_dump(struct saa7164_dev *dev);
+int saa7164_bus_set(struct saa7164_dev *dev, struct tmComResInfo* msg,
+	void *buf);
+int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg,
+	void *buf, int peekonly);
+
+/* ----------------------------------------------------------- */
+/* saa7164-cmd.c                                               */
+int saa7164_cmd_send(struct saa7164_dev *dev,
+	u8 id, enum tmComResCmd command, u16 controlselector,
+	u16 size, void *buf);
+int saa7164_irq_dequeue(struct saa7164_dev *dev);
+
+/* ----------------------------------------------------------- */
+/* saa7164-api.c                                               */
+int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version);
+int saa7164_api_enum_subdevs(struct saa7164_dev *dev);
+int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg,
+	u32 datalen, u8 *data);
+int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr,
+	u32 datalen, u8 *data);
+int saa7164_api_dif_write(struct saa7164_i2c *bus, u8 addr,
+	u32 datalen, u8 *data);
+int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen);
+int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid, u8 pin);
+int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid, u8 pin);
+int saa7164_api_transition_port(struct saa7164_port *port, u8 mode);
+int saa7164_api_initialize_dif(struct saa7164_port *port);
+int saa7164_api_configure_dif(struct saa7164_port *port, u32 std);
+int saa7164_api_set_encoder(struct saa7164_port *port);
+int saa7164_api_get_encoder(struct saa7164_port *port);
+int saa7164_api_set_aspect_ratio(struct saa7164_port *port);
+int saa7164_api_set_usercontrol(struct saa7164_port *port, u8 ctl);
+int saa7164_api_get_usercontrol(struct saa7164_port *port, u8 ctl);
+int saa7164_api_set_videomux(struct saa7164_port *port);
+int saa7164_api_audio_mute(struct saa7164_port *port, int mute);
+int saa7164_api_set_audio_volume(struct saa7164_port *port, s8 level);
+int saa7164_api_set_audio_std(struct saa7164_port *port);
+int saa7164_api_set_audio_detection(struct saa7164_port *port, int autodetect);
+int saa7164_api_get_videomux(struct saa7164_port *port);
+int saa7164_api_set_vbi_format(struct saa7164_port *port);
+int saa7164_api_set_debug(struct saa7164_dev *dev, u8 level);
+int saa7164_api_collect_debug(struct saa7164_dev *dev);
+int saa7164_api_get_load_info(struct saa7164_dev *dev,
+	struct tmFwInfoStruct *i);
+
+/* ----------------------------------------------------------- */
+/* saa7164-cards.c                                             */
+extern struct saa7164_board saa7164_boards[];
+extern const unsigned int saa7164_bcount;
+
+extern struct saa7164_subid saa7164_subids[];
+extern const unsigned int saa7164_idcount;
+
+extern void saa7164_card_list(struct saa7164_dev *dev);
+extern void saa7164_gpio_setup(struct saa7164_dev *dev);
+extern void saa7164_card_setup(struct saa7164_dev *dev);
+
+extern int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr);
+extern int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr);
+extern char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid);
+
+/* ----------------------------------------------------------- */
+/* saa7164-dvb.c                                               */
+extern int saa7164_dvb_register(struct saa7164_port *port);
+extern int saa7164_dvb_unregister(struct saa7164_port *port);
+
+/* ----------------------------------------------------------- */
+/* saa7164-buffer.c                                            */
+extern struct saa7164_buffer *saa7164_buffer_alloc(
+	struct saa7164_port *port, u32 len);
+extern int saa7164_buffer_dealloc(struct saa7164_buffer *buf);
+extern int saa7164_buffer_activate(struct saa7164_buffer *buf, int i);
+extern int saa7164_buffer_cfg_port(struct saa7164_port *port);
+extern struct saa7164_user_buffer *saa7164_buffer_alloc_user(
+	struct saa7164_dev *dev, u32 len);
+extern void saa7164_buffer_dealloc_user(struct saa7164_user_buffer *buf);
+extern int saa7164_buffer_zero_offsets(struct saa7164_port *port, int i);
+
+/* ----------------------------------------------------------- */
+/* saa7164-encoder.c                                            */
+int saa7164_s_std(struct saa7164_port *port, v4l2_std_id id);
+int saa7164_g_std(struct saa7164_port *port, v4l2_std_id *id);
+int saa7164_enum_input(struct file *file, void *priv, struct v4l2_input *i);
+int saa7164_g_input(struct saa7164_port *port, unsigned int *i);
+int saa7164_s_input(struct saa7164_port *port, unsigned int i);
+int saa7164_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t);
+int saa7164_s_tuner(struct file *file, void *priv, const struct v4l2_tuner *t);
+int saa7164_g_frequency(struct saa7164_port *port, struct v4l2_frequency *f);
+int saa7164_s_frequency(struct saa7164_port *port,
+			const struct v4l2_frequency *f);
+int saa7164_encoder_register(struct saa7164_port *port);
+void saa7164_encoder_unregister(struct saa7164_port *port);
+
+/* ----------------------------------------------------------- */
+/* saa7164-vbi.c                                            */
+int saa7164_vbi_register(struct saa7164_port *port);
+void saa7164_vbi_unregister(struct saa7164_port *port);
+
+/* ----------------------------------------------------------- */
+
+extern unsigned int crc_checking;
+
+extern unsigned int saa_debug;
+#define dprintk(level, fmt, arg...)\
+	do { if (saa_debug & level)\
+		printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\
+	} while (0)
+
+#define log_warn(fmt, arg...)\
+	do { \
+		printk(KERN_WARNING "%s: " fmt, dev->name, ## arg);\
+	} while (0)
+
+#define saa7164_readl(reg) readl(dev->lmmio + ((reg) >> 2))
+#define saa7164_writel(reg, value) writel((value), dev->lmmio + ((reg) >> 2))
+
+#define saa7164_readb(reg)             readl(dev->bmmio + (reg))
+#define saa7164_writeb(reg, value)     writel((value), dev->bmmio + (reg))
+