Resguardo inicial

linux-7.2.3/drivers/memory/.gitignore

@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+/ti-emif-asm-offsets.h

linux-7.2.3/drivers/memory/Kconfig

@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Memory devices
+#
+
+menuconfig MEMORY
+	bool "Memory Controller drivers"
+	help
+	  This option allows to enable specific memory controller drivers,
+	  useful mostly on embedded systems.  These could be controllers
+	  for DRAM (SDR, DDR), ROM, SRAM and others.  The drivers features
+	  vary from memory tuning and frequency scaling to enabling
+	  access to attached peripherals through memory bus.
+
+if MEMORY
+
+config DDR
+	bool
+	help
+	  Data from JEDEC specs for DDR SDRAM memories,
+	  particularly the AC timing parameters and addressing
+	  information. This data is useful for drivers handling
+	  DDR SDRAM controllers.
+
+config ARM_PL172_MPMC
+	tristate "ARM PL172 MPMC driver"
+	depends on ARM_AMBA && OF
+	help
+	  This selects the ARM PrimeCell PL172 MultiPort Memory Controller.
+	  If you have an embedded system with an AMBA bus and a PL172
+	  controller, say Y or M here.
+
+config ATMEL_EBI
+	bool "Atmel EBI driver"
+	default ARCH_AT91
+	depends on ARCH_AT91 || COMPILE_TEST
+	depends on OF
+	select MFD_SYSCON
+	select MFD_ATMEL_SMC
+	help
+	  Driver for Atmel EBI controller.
+	  Used to configure the EBI (external bus interface) when the device-
+	  tree is used. This bus supports NANDs, external ethernet controller,
+	  SRAMs, ATA devices, etc.
+
+config BRCMSTB_DPFE
+	tristate "Broadcom STB DPFE driver"
+	default ARCH_BRCMSTB
+	depends on ARCH_BRCMSTB || COMPILE_TEST
+	help
+	  This driver provides access to the DPFE interface of Broadcom
+	  STB SoCs. The firmware running on the DCPU inside the DDR PHY can
+	  provide current information about the system's RAM, for instance
+	  the DRAM refresh rate. This can be used as an indirect indicator
+	  for the DRAM's temperature. Slower refresh rate means cooler RAM,
+	  higher refresh rate means hotter RAM.
+
+config BRCMSTB_MEMC
+	tristate "Broadcom STB MEMC driver"
+	default ARCH_BRCMSTB
+	depends on ARCH_BRCMSTB || COMPILE_TEST
+	help
+	  This driver provides a way to configure the Broadcom STB memory
+	  controller and specifically control the Self Refresh Power Down
+	  (SRPD) inactivity timeout.
+
+config TI_AEMIF
+	tristate "Texas Instruments AEMIF driver"
+	depends on ARCH_DAVINCI || ARCH_KEYSTONE || COMPILE_TEST
+	depends on OF
+	help
+	  This driver is for the AEMIF module available in Texas Instruments
+	  SoCs. AEMIF stands for Asynchronous External Memory Interface and
+	  is intended to provide a glue-less interface to a variety of
+	  asynchronuous memory devices like ASRAM, NOR and NAND memory. A total
+	  of 256M bytes of any of these memories can be accessed at a given
+	  time via four chip selects with 64M byte access per chip select.
+
+config TI_EMIF
+	tristate "Texas Instruments EMIF driver"
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	select DDR
+	help
+	  This driver is for the EMIF module available in Texas Instruments
+	  SoCs. EMIF is an SDRAM controller that, based on its revision,
+	  supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
+	  This driver takes care of only LPDDR2 memories presently. The
+	  functions of the driver includes re-configuring AC timing
+	  parameters and other settings during frequency, voltage and
+	  temperature changes
+
+config OMAP_GPMC
+	tristate "Texas Instruments OMAP SoC GPMC driver"
+	depends on OF_ADDRESS
+	depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	select GPIOLIB
+	help
+	  This driver is for the General Purpose Memory Controller (GPMC)
+	  present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows
+	  interfacing to a variety of asynchronous as well as synchronous
+	  memory drives like NOR, NAND, OneNAND, SRAM.
+
+config OMAP_GPMC_DEBUG
+	bool "Enable GPMC debug output and skip reset of GPMC during init"
+	depends on OMAP_GPMC
+	help
+	  Enables verbose debugging mostly to decode the bootloader provided
+	  timings. To preserve the bootloader provided timings, the reset
+	  of GPMC is skipped during init. Enable this during development to
+	  configure devices connected to the GPMC bus.
+
+	  NOTE: In addition to matching the register setup with the bootloader
+	  you also need to match the GPMC FCLK frequency used by the
+	  bootloader or else the GPMC timings won't be identical with the
+	  bootloader timings.
+
+config TI_EMIF_SRAM
+	tristate "Texas Instruments EMIF SRAM driver"
+	depends on SOC_AM33XX || SOC_AM43XX || (ARM && CPU_V7 && COMPILE_TEST)
+	depends on SRAM
+	help
+	  This driver is for the EMIF module available on Texas Instruments
+	  AM33XX and AM43XX SoCs and is required for PM. Certain parts of
+	  the EMIF PM code must run from on-chip SRAM late in the suspend
+	  sequence so this driver provides several relocatable PM functions
+	  for the SoC PM code to use.
+
+config FPGA_DFL_EMIF
+	tristate "FPGA DFL EMIF Driver"
+	depends on FPGA_DFL && HAS_IOMEM
+	help
+	  This driver is for the EMIF private feature implemented under
+	  FPGA Device Feature List (DFL) framework. It is used to expose
+	  memory interface status information as well as memory clearing
+	  control.
+
+config MVEBU_DEVBUS
+	bool "Marvell EBU Device Bus Controller"
+	default PLAT_ORION
+	depends on PLAT_ORION || COMPILE_TEST
+	depends on OF
+	help
+	  This driver is for the Device Bus controller available in some
+	  Marvell EBU SoCs such as Discovery (mv78xx0), Orion (88f5xxx) and
+	  Armada 370 and Armada XP. This controller allows to handle flash
+	  devices such as NOR, NAND, SRAM, and FPGA.
+
+config FSL_CORENET_CF
+	tristate "Freescale CoreNet Error Reporting"
+	depends on FSL_SOC_BOOKE || COMPILE_TEST
+	help
+	  Say Y for reporting of errors from the Freescale CoreNet
+	  Coherency Fabric.  Errors reported include accesses to
+	  physical addresses that mapped by no local access window
+	  (LAW) or an invalid LAW, as well as bad cache state that
+	  represents a coherency violation.
+
+config FSL_IFC
+	bool "Freescale IFC driver"
+	depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
+	depends on HAS_IOMEM
+
+config JZ4780_NEMC
+	bool "Ingenic JZ4780 SoC NEMC driver"
+	depends on MIPS || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	help
+	  This driver is for the NAND/External Memory Controller (NEMC) in
+	  the Ingenic JZ4780. This controller is used to handle external
+	  memory devices such as NAND and SRAM.
+
+config MTK_SMI
+	tristate "MediaTek SoC Memory Controller driver" if COMPILE_TEST
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	help
+	  This driver is for the Memory Controller module in MediaTek SoCs,
+	  mainly help enable/disable iommu and control the power domain and
+	  clocks for each local arbiter.
+
+config DA8XX_DDRCTL
+	bool "Texas Instruments da8xx DDR2/mDDR driver"
+	depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
+	help
+	  This driver is for the DDR2/mDDR Memory Controller present on
+	  Texas Instruments da8xx SoCs. It's used to tweak various memory
+	  controller configuration options.
+
+config PL353_SMC
+	tristate "ARM PL35X Static Memory Controller(SMC) driver"
+	default ARM
+	depends on ARM || COMPILE_TEST
+	depends on ARM_AMBA
+	help
+	  This driver is for the ARM PL351/PL353 Static Memory
+	  Controller(SMC) module.
+
+config RENESAS_RPCIF
+	tristate "Renesas RPC-IF driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select REGMAP_MMIO
+	select RESET_CONTROLLER
+	help
+	  This supports Renesas R-Car Gen3 or RZ/G2 RPC-IF which provides
+	  either SPI host or HyperFlash. You'll have to select individual
+	  components under the corresponding menu.
+
+config STM32_FMC2_EBI
+	tristate "Support for FMC2 External Bus Interface on STM32MP SoCs"
+	depends on ARCH_STM32 || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  Select this option to enable the STM32 FMC2 External Bus Interface
+	  controller. This driver configures the transactions with external
+	  devices (like SRAM, ethernet adapters, FPGAs, LCD displays, ...) on
+	  SOCs containing the FMC2 External Bus Interface.
+
+config STM32_OMM
+	tristate "STM32 Octo Memory Manager"
+	depends on SPI_STM32_OSPI || COMPILE_TEST
+	help
+	  This driver manages the muxing between the 2 OSPI busses and
+	  the 2 output ports. There are 4 possible muxing configurations:
+	  - direct mode (no multiplexing): OSPI1 output is on port 1 and OSPI2
+	       output is on port 2
+	  - OSPI1 and OSPI2 are multiplexed over the same output port 1
+	  - swapped mode (no multiplexing), OSPI1 output is on port 2,
+	       OSPI2 output is on port 1
+	  - OSPI1 and OSPI2 are multiplexed over the same output port 2
+	  It also manages :
+	    - the split of the memory area shared between the 2 OSPI instances.
+	    - chip select selection override.
+	    - the time between 2 transactions in multiplexed mode.
+
+source "drivers/memory/samsung/Kconfig"
+source "drivers/memory/tegra/Kconfig"
+
+endif

linux-7.2.3/drivers/memory/Makefile

@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for memory devices
+#
+
+obj-$(CONFIG_DDR)		+= jedec_ddr_data.o
+ifeq ($(CONFIG_DDR),y)
+obj-$(CONFIG_OF)		+= of_memory.o
+endif
+obj-$(CONFIG_ARM_PL172_MPMC)	+= pl172.o
+obj-$(CONFIG_ATMEL_EBI)		+= atmel-ebi.o
+obj-$(CONFIG_BRCMSTB_DPFE)	+= brcmstb_dpfe.o
+obj-$(CONFIG_BRCMSTB_MEMC)	+= brcmstb_memc.o
+obj-$(CONFIG_TI_AEMIF)		+= ti-aemif.o
+obj-$(CONFIG_TI_EMIF)		+= emif.o
+obj-$(CONFIG_OMAP_GPMC)		+= omap-gpmc.o
+obj-$(CONFIG_FSL_CORENET_CF)	+= fsl-corenet-cf.o
+obj-$(CONFIG_FSL_IFC)		+= fsl_ifc.o
+obj-$(CONFIG_MVEBU_DEVBUS)	+= mvebu-devbus.o
+obj-$(CONFIG_JZ4780_NEMC)	+= jz4780-nemc.o
+obj-$(CONFIG_MTK_SMI)		+= mtk-smi.o
+obj-$(CONFIG_DA8XX_DDRCTL)	+= da8xx-ddrctl.o
+obj-$(CONFIG_PL353_SMC)		+= pl353-smc.o
+obj-$(CONFIG_RENESAS_RPCIF)	+= renesas-rpc-if.o
+obj-$(CONFIG_STM32_FMC2_EBI)	+= stm32-fmc2-ebi.o
+obj-$(CONFIG_STM32_OMM)		+= stm32_omm.o
+
+obj-$(CONFIG_SAMSUNG_MC)	+= samsung/
+obj-$(CONFIG_TEGRA_MC)		+= tegra/
+obj-$(CONFIG_TI_EMIF_SRAM)	+= ti-emif-sram.o
+obj-$(CONFIG_FPGA_DFL_EMIF)	+= dfl-emif.o
+
+ti-emif-sram-objs		:= ti-emif-pm.o ti-emif-sram-pm.o
+
+$(obj)/ti-emif-sram-pm.o: $(obj)/ti-emif-asm-offsets.h
+
+$(obj)/ti-emif-asm-offsets.h: $(obj)/emif-asm-offsets.s FORCE
+	$(call filechk,offsets,__TI_EMIF_ASM_OFFSETS_H__)
+
+targets += emif-asm-offsets.s
+clean-files += ti-emif-asm-offsets.h

linux-7.2.3/drivers/memory/atmel-ebi.c

@@ -0,0 +1,638 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * EBI driver for Atmel chips
+ * inspired by the fsl weim bus driver
+ *
+ * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ */
+
+#include <linux/cleanup.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-matrix.h>
+#include <linux/mfd/syscon/atmel-smc.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <soc/at91/atmel-sfr.h>
+
+#define AT91_EBI_NUM_CS		8
+
+struct atmel_ebi_dev_config {
+	int cs;
+	struct atmel_smc_cs_conf smcconf;
+};
+
+struct atmel_ebi;
+
+struct atmel_ebi_dev {
+	struct list_head node;
+	struct atmel_ebi *ebi;
+	u32 mode;
+	int numcs;
+	struct atmel_ebi_dev_config configs[] __counted_by(numcs);
+};
+
+struct atmel_ebi_caps {
+	unsigned int available_cs;
+	unsigned int ebi_csa_offs;
+	const char *regmap_name;
+	void (*get_config)(struct atmel_ebi_dev *ebid,
+			   struct atmel_ebi_dev_config *conf);
+	int (*xlate_config)(struct atmel_ebi_dev *ebid,
+			    struct device_node *configs_np,
+			    struct atmel_ebi_dev_config *conf);
+	void (*apply_config)(struct atmel_ebi_dev *ebid,
+			     struct atmel_ebi_dev_config *conf);
+};
+
+struct atmel_ebi {
+	struct clk *clk;
+	struct regmap *regmap;
+	struct  {
+		struct regmap *regmap;
+		struct clk *clk;
+		const struct atmel_hsmc_reg_layout *layout;
+	} smc;
+
+	struct device *dev;
+	const struct atmel_ebi_caps *caps;
+	struct list_head devs;
+};
+
+struct atmel_smc_timing_xlate {
+	const char *name;
+	int (*converter)(struct atmel_smc_cs_conf *conf,
+			 unsigned int shift, unsigned int nycles);
+	unsigned int shift;
+};
+
+#define ATMEL_SMC_SETUP_XLATE(nm, pos)	\
+	{ .name = nm, .converter = atmel_smc_cs_conf_set_setup, .shift = pos}
+
+#define ATMEL_SMC_PULSE_XLATE(nm, pos)	\
+	{ .name = nm, .converter = atmel_smc_cs_conf_set_pulse, .shift = pos}
+
+#define ATMEL_SMC_CYCLE_XLATE(nm, pos)	\
+	{ .name = nm, .converter = atmel_smc_cs_conf_set_cycle, .shift = pos}
+
+static void at91sam9_ebi_get_config(struct atmel_ebi_dev *ebid,
+				    struct atmel_ebi_dev_config *conf)
+{
+	atmel_smc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs,
+			      &conf->smcconf);
+}
+
+static void sama5_ebi_get_config(struct atmel_ebi_dev *ebid,
+				 struct atmel_ebi_dev_config *conf)
+{
+	atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, ebid->ebi->smc.layout,
+			       conf->cs, &conf->smcconf);
+}
+
+static const struct atmel_smc_timing_xlate timings_xlate_table[] = {
+	ATMEL_SMC_SETUP_XLATE("atmel,smc-ncs-rd-setup-ns",
+			      ATMEL_SMC_NCS_RD_SHIFT),
+	ATMEL_SMC_SETUP_XLATE("atmel,smc-ncs-wr-setup-ns",
+			      ATMEL_SMC_NCS_WR_SHIFT),
+	ATMEL_SMC_SETUP_XLATE("atmel,smc-nrd-setup-ns", ATMEL_SMC_NRD_SHIFT),
+	ATMEL_SMC_SETUP_XLATE("atmel,smc-nwe-setup-ns", ATMEL_SMC_NWE_SHIFT),
+	ATMEL_SMC_PULSE_XLATE("atmel,smc-ncs-rd-pulse-ns",
+			      ATMEL_SMC_NCS_RD_SHIFT),
+	ATMEL_SMC_PULSE_XLATE("atmel,smc-ncs-wr-pulse-ns",
+			      ATMEL_SMC_NCS_WR_SHIFT),
+	ATMEL_SMC_PULSE_XLATE("atmel,smc-nrd-pulse-ns", ATMEL_SMC_NRD_SHIFT),
+	ATMEL_SMC_PULSE_XLATE("atmel,smc-nwe-pulse-ns", ATMEL_SMC_NWE_SHIFT),
+	ATMEL_SMC_CYCLE_XLATE("atmel,smc-nrd-cycle-ns", ATMEL_SMC_NRD_SHIFT),
+	ATMEL_SMC_CYCLE_XLATE("atmel,smc-nwe-cycle-ns", ATMEL_SMC_NWE_SHIFT),
+};
+
+static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid,
+					struct device_node *np,
+					struct atmel_smc_cs_conf *smcconf)
+{
+	unsigned int clk_rate = clk_get_rate(ebid->ebi->clk);
+	unsigned int clk_period_ns = NSEC_PER_SEC / clk_rate;
+	bool required = false;
+	unsigned int ncycles;
+	int ret, i;
+	u32 val;
+
+	ret = of_property_read_u32(np, "atmel,smc-tdf-ns", &val);
+	if (!ret) {
+		required = true;
+		ncycles = DIV_ROUND_UP(val, clk_period_ns);
+		if (ncycles > ATMEL_SMC_MODE_TDF_MAX) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (ncycles < ATMEL_SMC_MODE_TDF_MIN)
+			ncycles = ATMEL_SMC_MODE_TDF_MIN;
+
+		smcconf->mode |= ATMEL_SMC_MODE_TDF(ncycles);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(timings_xlate_table); i++) {
+		const struct atmel_smc_timing_xlate *xlate;
+
+		xlate = &timings_xlate_table[i];
+
+		ret = of_property_read_u32(np, xlate->name, &val);
+		if (ret) {
+			if (!required)
+				continue;
+			else
+				break;
+		}
+
+		if (!required) {
+			ret = -EINVAL;
+			break;
+		}
+
+		ncycles = DIV_ROUND_UP(val, clk_period_ns);
+		ret = xlate->converter(smcconf, xlate->shift, ncycles);
+		if (ret)
+			goto out;
+	}
+
+out:
+	if (ret) {
+		dev_err(ebid->ebi->dev,
+			"missing or invalid timings definition in %pOF",
+			np);
+		return ret;
+	}
+
+	return required;
+}
+
+static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid,
+				       struct device_node *np,
+				       struct atmel_ebi_dev_config *conf)
+{
+	struct atmel_smc_cs_conf *smcconf = &conf->smcconf;
+	bool required = false;
+	const char *tmp_str;
+	u32 tmp;
+	int ret;
+
+	ret = of_property_read_u32(np, "atmel,smc-bus-width", &tmp);
+	if (!ret) {
+		switch (tmp) {
+		case 8:
+			smcconf->mode |= ATMEL_SMC_MODE_DBW_8;
+			break;
+
+		case 16:
+			smcconf->mode |= ATMEL_SMC_MODE_DBW_16;
+			break;
+
+		case 32:
+			smcconf->mode |= ATMEL_SMC_MODE_DBW_32;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+		required = true;
+	}
+
+	if (of_property_read_bool(np, "atmel,smc-tdf-optimized")) {
+		smcconf->mode |= ATMEL_SMC_MODE_TDFMODE_OPTIMIZED;
+		required = true;
+	}
+
+	tmp_str = NULL;
+	of_property_read_string(np, "atmel,smc-byte-access-type", &tmp_str);
+	if (tmp_str && !strcmp(tmp_str, "write")) {
+		smcconf->mode |= ATMEL_SMC_MODE_BAT_WRITE;
+		required = true;
+	}
+
+	tmp_str = NULL;
+	of_property_read_string(np, "atmel,smc-read-mode", &tmp_str);
+	if (tmp_str && !strcmp(tmp_str, "nrd")) {
+		smcconf->mode |= ATMEL_SMC_MODE_READMODE_NRD;
+		required = true;
+	}
+
+	tmp_str = NULL;
+	of_property_read_string(np, "atmel,smc-write-mode", &tmp_str);
+	if (tmp_str && !strcmp(tmp_str, "nwe")) {
+		smcconf->mode |= ATMEL_SMC_MODE_WRITEMODE_NWE;
+		required = true;
+	}
+
+	tmp_str = NULL;
+	of_property_read_string(np, "atmel,smc-exnw-mode", &tmp_str);
+	if (tmp_str) {
+		if (!strcmp(tmp_str, "frozen"))
+			smcconf->mode |= ATMEL_SMC_MODE_EXNWMODE_FROZEN;
+		else if (!strcmp(tmp_str, "ready"))
+			smcconf->mode |= ATMEL_SMC_MODE_EXNWMODE_READY;
+		else if (strcmp(tmp_str, "disabled"))
+			return -EINVAL;
+
+		required = true;
+	}
+
+	ret = of_property_read_u32(np, "atmel,smc-page-mode", &tmp);
+	if (!ret) {
+		switch (tmp) {
+		case 4:
+			smcconf->mode |= ATMEL_SMC_MODE_PS_4;
+			break;
+
+		case 8:
+			smcconf->mode |= ATMEL_SMC_MODE_PS_8;
+			break;
+
+		case 16:
+			smcconf->mode |= ATMEL_SMC_MODE_PS_16;
+			break;
+
+		case 32:
+			smcconf->mode |= ATMEL_SMC_MODE_PS_32;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+		smcconf->mode |= ATMEL_SMC_MODE_PMEN;
+		required = true;
+	}
+
+	ret = atmel_ebi_xslate_smc_timings(ebid, np, &conf->smcconf);
+	if (ret < 0)
+		return -EINVAL;
+
+	if ((ret > 0 && !required) || (!ret && required)) {
+		dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %pOF",
+			np);
+		return -EINVAL;
+	}
+
+	return required;
+}
+
+static void at91sam9_ebi_apply_config(struct atmel_ebi_dev *ebid,
+				      struct atmel_ebi_dev_config *conf)
+{
+	atmel_smc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs,
+				&conf->smcconf);
+}
+
+static void sama5_ebi_apply_config(struct atmel_ebi_dev *ebid,
+				   struct atmel_ebi_dev_config *conf)
+{
+	atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, ebid->ebi->smc.layout,
+				 conf->cs, &conf->smcconf);
+}
+
+static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
+			       int reg_cells)
+{
+	const struct atmel_ebi_caps *caps = ebi->caps;
+	struct atmel_ebi_dev_config conf = { };
+	struct device *dev = ebi->dev;
+	struct atmel_ebi_dev *ebid;
+	unsigned long cslines = 0;
+	int ret, numcs = 0, nentries, i;
+	bool apply = false;
+	u32 cs;
+
+	nentries = of_property_count_elems_of_size(np, "reg",
+						   reg_cells * sizeof(u32));
+	for (i = 0; i < nentries; i++) {
+		ret = of_property_read_u32_index(np, "reg", i * reg_cells,
+						 &cs);
+		if (ret)
+			return ret;
+
+		if (cs >= AT91_EBI_NUM_CS ||
+		    !(ebi->caps->available_cs & BIT(cs))) {
+			dev_err(dev, "invalid reg property in %pOF\n", np);
+			return -EINVAL;
+		}
+
+		if (!test_and_set_bit(cs, &cslines))
+			numcs++;
+	}
+
+	if (!numcs) {
+		dev_err(dev, "invalid reg property in %pOF\n", np);
+		return -EINVAL;
+	}
+
+	ebid = devm_kzalloc(ebi->dev, struct_size(ebid, configs, numcs),
+			    GFP_KERNEL);
+	if (!ebid)
+		return -ENOMEM;
+
+	ebid->ebi = ebi;
+	ebid->numcs = numcs;
+
+	ret = caps->xlate_config(ebid, np, &conf);
+	if (ret < 0)
+		return ret;
+	else if (ret)
+		apply = true;
+
+	i = 0;
+	for_each_set_bit(cs, &cslines, AT91_EBI_NUM_CS) {
+		ebid->configs[i].cs = cs;
+
+		if (apply) {
+			conf.cs = cs;
+			caps->apply_config(ebid, &conf);
+		}
+
+		caps->get_config(ebid, &ebid->configs[i]);
+
+		/*
+		 * Attach the EBI device to the generic SMC logic if at least
+		 * one "atmel,smc-" property is present.
+		 */
+		if (ebi->caps->ebi_csa_offs && apply)
+			regmap_update_bits(ebi->regmap,
+					   ebi->caps->ebi_csa_offs,
+					   BIT(cs), 0);
+
+		i++;
+	}
+
+	list_add_tail(&ebid->node, &ebi->devs);
+
+	return 0;
+}
+
+static const struct atmel_ebi_caps at91sam9260_ebi_caps = {
+	.available_cs = 0xff,
+	.ebi_csa_offs = AT91SAM9260_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps at91sam9261_ebi_caps = {
+	.available_cs = 0xff,
+	.ebi_csa_offs = AT91SAM9261_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps at91sam9263_ebi0_caps = {
+	.available_cs = 0x3f,
+	.ebi_csa_offs = AT91SAM9263_MATRIX_EBI0CSA,
+	.regmap_name = "atmel,matrix",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps at91sam9263_ebi1_caps = {
+	.available_cs = 0x7,
+	.ebi_csa_offs = AT91SAM9263_MATRIX_EBI1CSA,
+	.regmap_name = "atmel,matrix",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps at91sam9rl_ebi_caps = {
+	.available_cs = 0x3f,
+	.ebi_csa_offs = AT91SAM9RL_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps at91sam9g45_ebi_caps = {
+	.available_cs = 0x3f,
+	.ebi_csa_offs = AT91SAM9G45_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps at91sam9x5_ebi_caps = {
+	.available_cs = 0x3f,
+	.ebi_csa_offs = AT91SAM9X5_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps sama5d3_ebi_caps = {
+	.available_cs = 0xf,
+	.get_config = sama5_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = sama5_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps sam9x60_ebi_caps = {
+	.available_cs = 0x3f,
+	.ebi_csa_offs = AT91_SFR_CCFG_EBICSA,
+	.regmap_name = "microchip,sfr",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct of_device_id atmel_ebi_id_table[] = {
+	{
+		.compatible = "atmel,at91sam9260-ebi",
+		.data = &at91sam9260_ebi_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9261-ebi",
+		.data = &at91sam9261_ebi_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9263-ebi0",
+		.data = &at91sam9263_ebi0_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9263-ebi1",
+		.data = &at91sam9263_ebi1_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9rl-ebi",
+		.data = &at91sam9rl_ebi_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9g45-ebi",
+		.data = &at91sam9g45_ebi_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9x5-ebi",
+		.data = &at91sam9x5_ebi_caps,
+	},
+	{
+		.compatible = "atmel,sama5d3-ebi",
+		.data = &sama5d3_ebi_caps,
+	},
+	{
+		.compatible = "microchip,sam9x60-ebi",
+		.data = &sam9x60_ebi_caps,
+	},
+	{ /* sentinel */ }
+};
+
+static int atmel_ebi_dev_disable(struct atmel_ebi *ebi, struct device_node *np)
+{
+	struct device *dev = ebi->dev;
+	struct property *newprop;
+
+	newprop = devm_kzalloc(dev, sizeof(*newprop), GFP_KERNEL);
+	if (!newprop)
+		return -ENOMEM;
+
+	newprop->name = devm_kstrdup(dev, "status", GFP_KERNEL);
+	if (!newprop->name)
+		return -ENOMEM;
+
+	newprop->value = devm_kstrdup(dev, "disabled", GFP_KERNEL);
+	if (!newprop->value)
+		return -ENOMEM;
+
+	newprop->length = sizeof("disabled");
+
+	return of_update_property(np, newprop);
+}
+
+static int atmel_ebi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct atmel_ebi *ebi;
+	int ret, reg_cells;
+	struct clk *clk;
+	u32 val;
+
+	ebi = devm_kzalloc(dev, sizeof(*ebi), GFP_KERNEL);
+	if (!ebi)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ebi);
+
+	INIT_LIST_HEAD(&ebi->devs);
+	ebi->caps = device_get_match_data(dev);
+	if (!ebi->caps)
+		return -EINVAL;
+	ebi->dev = dev;
+
+	clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	ebi->clk = clk;
+
+	struct device_node *smc_np __free(device_node) =
+		of_parse_phandle(dev->of_node, "atmel,smc", 0);
+
+	ebi->smc.regmap = syscon_node_to_regmap(smc_np);
+	if (IS_ERR(ebi->smc.regmap))
+		return PTR_ERR(ebi->smc.regmap);
+
+	ebi->smc.layout = atmel_hsmc_get_reg_layout(smc_np);
+	if (IS_ERR(ebi->smc.layout))
+		return PTR_ERR(ebi->smc.layout);
+
+	ebi->smc.clk = of_clk_get(smc_np, 0);
+	if (IS_ERR(ebi->smc.clk)) {
+		if (PTR_ERR(ebi->smc.clk) != -ENOENT)
+			return PTR_ERR(ebi->smc.clk);
+
+		ebi->smc.clk = NULL;
+	}
+	ret = clk_prepare_enable(ebi->smc.clk);
+	if (ret)
+		return ret;
+
+	/*
+	 * The sama5d3 does not provide an EBICSA register and thus does need
+	 * to access it.
+	 */
+	if (ebi->caps->ebi_csa_offs) {
+		ebi->regmap =
+			syscon_regmap_lookup_by_phandle(np,
+							ebi->caps->regmap_name);
+		if (IS_ERR(ebi->regmap))
+			return PTR_ERR(ebi->regmap);
+	}
+
+	ret = of_property_read_u32(np, "#address-cells", &val);
+	if (ret) {
+		dev_err(dev, "missing #address-cells property\n");
+		return ret;
+	}
+
+	reg_cells = val;
+
+	ret = of_property_read_u32(np, "#size-cells", &val);
+	if (ret) {
+		dev_err(dev, "missing #address-cells property\n");
+		return ret;
+	}
+
+	reg_cells += val;
+
+	for_each_available_child_of_node_scoped(np, child) {
+		if (!of_property_present(child, "reg"))
+			continue;
+
+		ret = atmel_ebi_dev_setup(ebi, child, reg_cells);
+		if (ret) {
+			dev_err(dev, "failed to configure EBI bus for %pOF, disabling the device",
+				child);
+
+			ret = atmel_ebi_dev_disable(ebi, child);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return of_platform_populate(np, NULL, NULL, dev);
+}
+
+static __maybe_unused int atmel_ebi_resume(struct device *dev)
+{
+	struct atmel_ebi *ebi = dev_get_drvdata(dev);
+	struct atmel_ebi_dev *ebid;
+
+	list_for_each_entry(ebid, &ebi->devs, node) {
+		int i;
+
+		for (i = 0; i < ebid->numcs; i++)
+			ebid->ebi->caps->apply_config(ebid, &ebid->configs[i]);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(atmel_ebi_pm_ops, NULL, atmel_ebi_resume);
+
+static struct platform_driver atmel_ebi_driver = {
+	.probe = atmel_ebi_probe,
+	.driver = {
+		.name = "atmel-ebi",
+		.of_match_table	= atmel_ebi_id_table,
+		.pm = &atmel_ebi_pm_ops,
+	},
+};
+builtin_platform_driver(atmel_ebi_driver);

linux-7.2.3/drivers/memory/brcmstb_dpfe.c

@@ -0,0 +1,945 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * DDR PHY Front End (DPFE) driver for Broadcom set top box SoCs
+ *
+ * Copyright (c) 2017 Broadcom
+ */
+
+/*
+ * This driver provides access to the DPFE interface of Broadcom STB SoCs.
+ * The firmware running on the DCPU inside the DDR PHY can provide current
+ * information about the system's RAM, for instance the DRAM refresh rate.
+ * This can be used as an indirect indicator for the DRAM's temperature.
+ * Slower refresh rate means cooler RAM, higher refresh rate means hotter
+ * RAM.
+ *
+ * Throughout the driver, we use readl_relaxed() and writel_relaxed(), which
+ * already contain the appropriate le32_to_cpu()/cpu_to_le32() calls.
+ *
+ * Note regarding the loading of the firmware image: we use be32_to_cpu()
+ * and le_32_to_cpu(), so we can support the following four cases:
+ *     - LE kernel + LE firmware image (the most common case)
+ *     - LE kernel + BE firmware image
+ *     - BE kernel + LE firmware image
+ *     - BE kernel + BE firmware image
+ *
+ * The DPCU always runs in big endian mode. The firmware image, however, can
+ * be in either format. Also, communication between host CPU and DCPU is
+ * always in little endian.
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define DRVNAME			"brcmstb-dpfe"
+
+/* DCPU register offsets */
+#define REG_DCPU_RESET		0x0
+#define REG_TO_DCPU_MBOX	0x10
+#define REG_TO_HOST_MBOX	0x14
+
+/* Macros to process offsets returned by the DCPU */
+#define DRAM_MSG_ADDR_OFFSET	0x0
+#define DRAM_MSG_TYPE_OFFSET	0x1c
+#define DRAM_MSG_ADDR_MASK	((1UL << DRAM_MSG_TYPE_OFFSET) - 1)
+#define DRAM_MSG_TYPE_MASK	((1UL << \
+				 (BITS_PER_LONG - DRAM_MSG_TYPE_OFFSET)) - 1)
+
+/* Message RAM */
+#define DCPU_MSG_RAM_START	0x100
+#define DCPU_MSG_RAM(x)		(DCPU_MSG_RAM_START + (x) * sizeof(u32))
+
+/* DRAM Info Offsets & Masks */
+#define DRAM_INFO_INTERVAL	0x0
+#define DRAM_INFO_MR4		0x4
+#define DRAM_INFO_ERROR		0x8
+#define DRAM_INFO_MR4_MASK	0xff
+#define DRAM_INFO_MR4_SHIFT	24	/* We need to look at byte 3 */
+
+/* DRAM MR4 Offsets & Masks */
+#define DRAM_MR4_REFRESH	0x0	/* Refresh rate */
+#define DRAM_MR4_SR_ABORT	0x3	/* Self Refresh Abort */
+#define DRAM_MR4_PPRE		0x4	/* Post-package repair entry/exit */
+#define DRAM_MR4_TH_OFFS	0x5	/* Thermal Offset; vendor specific */
+#define DRAM_MR4_TUF		0x7	/* Temperature Update Flag */
+
+#define DRAM_MR4_REFRESH_MASK	0x7
+#define DRAM_MR4_SR_ABORT_MASK	0x1
+#define DRAM_MR4_PPRE_MASK	0x1
+#define DRAM_MR4_TH_OFFS_MASK	0x3
+#define DRAM_MR4_TUF_MASK	0x1
+
+/* DRAM Vendor Offsets & Masks (API v2) */
+#define DRAM_VENDOR_MR5		0x0
+#define DRAM_VENDOR_MR6		0x4
+#define DRAM_VENDOR_MR7		0x8
+#define DRAM_VENDOR_MR8		0xc
+#define DRAM_VENDOR_ERROR	0x10
+#define DRAM_VENDOR_MASK	0xff
+#define DRAM_VENDOR_SHIFT	24	/* We need to look at byte 3 */
+
+/* DRAM Information Offsets & Masks (API v3) */
+#define DRAM_DDR_INFO_MR4	0x0
+#define DRAM_DDR_INFO_MR5	0x4
+#define DRAM_DDR_INFO_MR6	0x8
+#define DRAM_DDR_INFO_MR7	0xc
+#define DRAM_DDR_INFO_MR8	0x10
+#define DRAM_DDR_INFO_ERROR	0x14
+#define DRAM_DDR_INFO_MASK	0xff
+
+/* Reset register bits & masks */
+#define DCPU_RESET_SHIFT	0x0
+#define DCPU_RESET_MASK		0x1
+#define DCPU_CLK_DISABLE_SHIFT	0x2
+
+/* DCPU return codes */
+#define DCPU_RET_ERROR_BIT	BIT(31)
+#define DCPU_RET_SUCCESS	0x1
+#define DCPU_RET_ERR_HEADER	(DCPU_RET_ERROR_BIT | BIT(0))
+#define DCPU_RET_ERR_INVAL	(DCPU_RET_ERROR_BIT | BIT(1))
+#define DCPU_RET_ERR_CHKSUM	(DCPU_RET_ERROR_BIT | BIT(2))
+#define DCPU_RET_ERR_COMMAND	(DCPU_RET_ERROR_BIT | BIT(3))
+/* This error code is not firmware defined and only used in the driver. */
+#define DCPU_RET_ERR_TIMEDOUT	(DCPU_RET_ERROR_BIT | BIT(4))
+
+/* Firmware magic */
+#define DPFE_BE_MAGIC		0xfe1010fe
+#define DPFE_LE_MAGIC		0xfe0101fe
+
+/* Error codes */
+#define ERR_INVALID_MAGIC	-1
+#define ERR_INVALID_SIZE	-2
+#define ERR_INVALID_CHKSUM	-3
+
+/* Message types */
+#define DPFE_MSG_TYPE_COMMAND	1
+#define DPFE_MSG_TYPE_RESPONSE	2
+
+#define DELAY_LOOP_MAX		1000
+
+enum dpfe_msg_fields {
+	MSG_HEADER,
+	MSG_COMMAND,
+	MSG_ARG_COUNT,
+	MSG_ARG0,
+	MSG_FIELD_MAX	= 16 /* Max number of arguments */
+};
+
+enum dpfe_commands {
+	DPFE_CMD_GET_INFO,
+	DPFE_CMD_GET_REFRESH,
+	DPFE_CMD_GET_VENDOR,
+	DPFE_CMD_MAX /* Last entry */
+};
+
+/*
+ * Format of the binary firmware file:
+ *
+ *   entry
+ *      0    header
+ *              value:  0xfe0101fe  <== little endian
+ *                      0xfe1010fe  <== big endian
+ *      1    sequence:
+ *              [31:16] total segments on this build
+ *              [15:0]  this segment sequence.
+ *      2    FW version
+ *      3    IMEM byte size
+ *      4    DMEM byte size
+ *           IMEM
+ *           DMEM
+ *      last checksum ==> sum of everything
+ */
+struct dpfe_firmware_header {
+	u32 magic;
+	u32 sequence;
+	u32 version;
+	u32 imem_size;
+	u32 dmem_size;
+};
+
+/* Things we only need during initialization. */
+struct init_data {
+	unsigned int dmem_len;
+	unsigned int imem_len;
+	unsigned int chksum;
+	bool is_big_endian;
+};
+
+/* API version and corresponding commands */
+struct dpfe_api {
+	int version;
+	const char *fw_name;
+	const struct attribute_group **sysfs_attrs;
+	u32 command[DPFE_CMD_MAX][MSG_FIELD_MAX];
+};
+
+/* Things we need for as long as we are active. */
+struct brcmstb_dpfe_priv {
+	void __iomem *regs;
+	void __iomem *dmem;
+	void __iomem *imem;
+	struct device *dev;
+	const struct dpfe_api *dpfe_api;
+	struct mutex lock;
+};
+
+/*
+ * Forward declaration of our sysfs attribute functions, so we can declare the
+ * attribute data structures early.
+ */
+static ssize_t show_info(struct device *, struct device_attribute *, char *);
+static ssize_t show_refresh(struct device *, struct device_attribute *, char *);
+static ssize_t store_refresh(struct device *, struct device_attribute *,
+			  const char *, size_t);
+static ssize_t show_vendor(struct device *, struct device_attribute *, char *);
+static ssize_t show_dram(struct device *, struct device_attribute *, char *);
+
+/*
+ * Declare our attributes early, so they can be referenced in the API data
+ * structure. We need to do this, because the attributes depend on the API
+ * version.
+ */
+static DEVICE_ATTR(dpfe_info, 0444, show_info, NULL);
+static DEVICE_ATTR(dpfe_refresh, 0644, show_refresh, store_refresh);
+static DEVICE_ATTR(dpfe_vendor, 0444, show_vendor, NULL);
+static DEVICE_ATTR(dpfe_dram, 0444, show_dram, NULL);
+
+/* API v2 sysfs attributes */
+static struct attribute *dpfe_v2_attrs[] = {
+	&dev_attr_dpfe_info.attr,
+	&dev_attr_dpfe_refresh.attr,
+	&dev_attr_dpfe_vendor.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(dpfe_v2);
+
+/* API v3 sysfs attributes */
+static struct attribute *dpfe_v3_attrs[] = {
+	&dev_attr_dpfe_info.attr,
+	&dev_attr_dpfe_dram.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(dpfe_v3);
+
+/*
+ * Old API v2 firmware commands, as defined in the rev 0.61 specification, we
+ * use a version set to 1 to denote that it is not compatible with the new API
+ * v2 and onwards.
+ */
+static const struct dpfe_api dpfe_api_old_v2 = {
+	.version = 1,
+	.fw_name = "dpfe.bin",
+	.sysfs_attrs = dpfe_v2_groups,
+	.command = {
+		[DPFE_CMD_GET_INFO] = {
+			[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+			[MSG_COMMAND] = 1,
+			[MSG_ARG_COUNT] = 1,
+			[MSG_ARG0] = 1,
+		},
+		[DPFE_CMD_GET_REFRESH] = {
+			[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+			[MSG_COMMAND] = 2,
+			[MSG_ARG_COUNT] = 1,
+			[MSG_ARG0] = 1,
+		},
+		[DPFE_CMD_GET_VENDOR] = {
+			[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+			[MSG_COMMAND] = 2,
+			[MSG_ARG_COUNT] = 1,
+			[MSG_ARG0] = 2,
+		},
+	}
+};
+
+/*
+ * API v2 firmware commands, as defined in the rev 0.8 specification, named new
+ * v2 here
+ */
+static const struct dpfe_api dpfe_api_new_v2 = {
+	.version = 2,
+	.fw_name = NULL, /* We expect the firmware to have been downloaded! */
+	.sysfs_attrs = dpfe_v2_groups,
+	.command = {
+		[DPFE_CMD_GET_INFO] = {
+			[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+			[MSG_COMMAND] = 0x101,
+		},
+		[DPFE_CMD_GET_REFRESH] = {
+			[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+			[MSG_COMMAND] = 0x201,
+		},
+		[DPFE_CMD_GET_VENDOR] = {
+			[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+			[MSG_COMMAND] = 0x202,
+		},
+	}
+};
+
+/* API v3 firmware commands */
+static const struct dpfe_api dpfe_api_v3 = {
+	.version = 3,
+	.fw_name = NULL, /* We expect the firmware to have been downloaded! */
+	.sysfs_attrs = dpfe_v3_groups,
+	.command = {
+		[DPFE_CMD_GET_INFO] = {
+			[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+			[MSG_COMMAND] = 0x0101,
+			[MSG_ARG_COUNT] = 1,
+			[MSG_ARG0] = 1,
+		},
+		[DPFE_CMD_GET_REFRESH] = {
+			[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+			[MSG_COMMAND] = 0x0202,
+			[MSG_ARG_COUNT] = 0,
+		},
+		/* There's no GET_VENDOR command in API v3. */
+	},
+};
+
+static const char *get_error_text(unsigned int i)
+{
+	static const char * const error_text[] = {
+		"Success", "Header code incorrect",
+		"Unknown command or argument", "Incorrect checksum",
+		"Malformed command", "Timed out", "Unknown error",
+	};
+
+	if (unlikely(i >= ARRAY_SIZE(error_text)))
+		i = ARRAY_SIZE(error_text) - 1;
+
+	return error_text[i];
+}
+
+static bool is_dcpu_enabled(struct brcmstb_dpfe_priv *priv)
+{
+	u32 val;
+
+	mutex_lock(&priv->lock);
+	val = readl_relaxed(priv->regs + REG_DCPU_RESET);
+	mutex_unlock(&priv->lock);
+
+	return !(val & DCPU_RESET_MASK);
+}
+
+static void __disable_dcpu(struct brcmstb_dpfe_priv *priv)
+{
+	u32 val;
+
+	if (!is_dcpu_enabled(priv))
+		return;
+
+	mutex_lock(&priv->lock);
+
+	/* Put DCPU in reset if it's running. */
+	val = readl_relaxed(priv->regs + REG_DCPU_RESET);
+	val |= (1 << DCPU_RESET_SHIFT);
+	writel_relaxed(val, priv->regs + REG_DCPU_RESET);
+
+	mutex_unlock(&priv->lock);
+}
+
+static void __enable_dcpu(struct brcmstb_dpfe_priv *priv)
+{
+	void __iomem *regs = priv->regs;
+	u32 val;
+
+	mutex_lock(&priv->lock);
+
+	/* Clear mailbox registers. */
+	writel_relaxed(0, regs + REG_TO_DCPU_MBOX);
+	writel_relaxed(0, regs + REG_TO_HOST_MBOX);
+
+	/* Disable DCPU clock gating */
+	val = readl_relaxed(regs + REG_DCPU_RESET);
+	val &= ~(1 << DCPU_CLK_DISABLE_SHIFT);
+	writel_relaxed(val, regs + REG_DCPU_RESET);
+
+	/* Take DCPU out of reset */
+	val = readl_relaxed(regs + REG_DCPU_RESET);
+	val &= ~(1 << DCPU_RESET_SHIFT);
+	writel_relaxed(val, regs + REG_DCPU_RESET);
+
+	mutex_unlock(&priv->lock);
+}
+
+static unsigned int get_msg_chksum(const u32 msg[], unsigned int max)
+{
+	unsigned int sum = 0;
+	unsigned int i;
+
+	/* Don't include the last field in the checksum. */
+	for (i = 0; i < max; i++)
+		sum += msg[i];
+
+	return sum;
+}
+
+static void __iomem *get_msg_ptr(struct brcmstb_dpfe_priv *priv, u32 response,
+				 char *buf, ssize_t *size)
+{
+	unsigned int msg_type;
+	unsigned int offset;
+	void __iomem *ptr = NULL;
+
+	/* There is no need to use this function for API v3 or later. */
+	if (unlikely(priv->dpfe_api->version >= 3))
+		return NULL;
+
+	msg_type = (response >> DRAM_MSG_TYPE_OFFSET) & DRAM_MSG_TYPE_MASK;
+	offset = (response >> DRAM_MSG_ADDR_OFFSET) & DRAM_MSG_ADDR_MASK;
+
+	/*
+	 * msg_type == 1: the offset is relative to the message RAM
+	 * msg_type == 0: the offset is relative to the data RAM (this is the
+	 *                previous way of passing data)
+	 * msg_type is anything else: there's critical hardware problem
+	 */
+	switch (msg_type) {
+	case 1:
+		ptr = priv->regs + DCPU_MSG_RAM_START + offset;
+		break;
+	case 0:
+		ptr = priv->dmem + offset;
+		break;
+	default:
+		dev_emerg(priv->dev, "invalid message reply from DCPU: %#x\n",
+			response);
+		if (buf && size)
+			*size = sprintf(buf,
+				"FATAL: communication error with DCPU\n");
+	}
+
+	return ptr;
+}
+
+static void __finalize_command(struct brcmstb_dpfe_priv *priv)
+{
+	unsigned int release_mbox;
+
+	/*
+	 * It depends on the API version which MBOX register we have to write to
+	 * signal we are done.
+	 */
+	release_mbox = (priv->dpfe_api->version < 2)
+			? REG_TO_HOST_MBOX : REG_TO_DCPU_MBOX;
+	writel_relaxed(0, priv->regs + release_mbox);
+}
+
+static int __send_command(struct brcmstb_dpfe_priv *priv, unsigned int cmd,
+			  u32 result[])
+{
+	void __iomem *regs = priv->regs;
+	unsigned int i, chksum, chksum_idx;
+	const u32 *msg;
+	int ret = 0;
+	u32 resp;
+
+	if (cmd >= DPFE_CMD_MAX)
+		return -1;
+
+	msg = priv->dpfe_api->command[cmd];
+
+	mutex_lock(&priv->lock);
+
+	/* Wait for DCPU to become ready */
+	for (i = 0; i < DELAY_LOOP_MAX; i++) {
+		resp = readl_relaxed(regs + REG_TO_HOST_MBOX);
+		if (resp == 0)
+			break;
+		msleep(1);
+	}
+	if (resp != 0) {
+		mutex_unlock(&priv->lock);
+		return -ffs(DCPU_RET_ERR_TIMEDOUT);
+	}
+
+	/* Compute checksum over the message */
+	chksum_idx = msg[MSG_ARG_COUNT] + MSG_ARG_COUNT + 1;
+	chksum = get_msg_chksum(msg, chksum_idx);
+
+	/* Write command and arguments to message area */
+	for (i = 0; i < MSG_FIELD_MAX; i++) {
+		if (i == chksum_idx)
+			writel_relaxed(chksum, regs + DCPU_MSG_RAM(i));
+		else
+			writel_relaxed(msg[i], regs + DCPU_MSG_RAM(i));
+	}
+
+	/* Tell DCPU there is a command waiting */
+	writel_relaxed(1, regs + REG_TO_DCPU_MBOX);
+
+	/* Wait for DCPU to process the command */
+	for (i = 0; i < DELAY_LOOP_MAX; i++) {
+		/* Read response code */
+		resp = readl_relaxed(regs + REG_TO_HOST_MBOX);
+		if (resp > 0)
+			break;
+		msleep(1);
+	}
+
+	if (i == DELAY_LOOP_MAX) {
+		resp = (DCPU_RET_ERR_TIMEDOUT & ~DCPU_RET_ERROR_BIT);
+		ret = -ffs(resp);
+	} else {
+		/* Read response data */
+		for (i = 0; i < MSG_FIELD_MAX; i++)
+			result[i] = readl_relaxed(regs + DCPU_MSG_RAM(i));
+		chksum_idx = result[MSG_ARG_COUNT] + MSG_ARG_COUNT + 1;
+	}
+
+	/* Tell DCPU we are done */
+	__finalize_command(priv);
+
+	mutex_unlock(&priv->lock);
+
+	if (ret)
+		return ret;
+
+	/* Verify response */
+	chksum = get_msg_chksum(result, chksum_idx);
+	if (chksum != result[chksum_idx])
+		resp = DCPU_RET_ERR_CHKSUM;
+
+	if (resp != DCPU_RET_SUCCESS) {
+		resp &= ~DCPU_RET_ERROR_BIT;
+		ret = -ffs(resp);
+	}
+
+	return ret;
+}
+
+/* Ensure that the firmware file loaded meets all the requirements. */
+static int __verify_firmware(struct init_data *init,
+			     const struct firmware *fw)
+{
+	const struct dpfe_firmware_header *header = (void *)fw->data;
+	unsigned int dmem_size, imem_size, total_size;
+	bool is_big_endian = false;
+	const u32 *chksum_ptr;
+
+	if (header->magic == DPFE_BE_MAGIC)
+		is_big_endian = true;
+	else if (header->magic != DPFE_LE_MAGIC)
+		return ERR_INVALID_MAGIC;
+
+	if (is_big_endian) {
+		dmem_size = be32_to_cpu(header->dmem_size);
+		imem_size = be32_to_cpu(header->imem_size);
+	} else {
+		dmem_size = le32_to_cpu(header->dmem_size);
+		imem_size = le32_to_cpu(header->imem_size);
+	}
+
+	/* Data and instruction sections are 32 bit words. */
+	if ((dmem_size % sizeof(u32)) != 0 || (imem_size % sizeof(u32)) != 0)
+		return ERR_INVALID_SIZE;
+
+	/*
+	 * The header + the data section + the instruction section + the
+	 * checksum must be equal to the total firmware size.
+	 */
+	total_size = dmem_size + imem_size + sizeof(*header) +
+		sizeof(*chksum_ptr);
+	if (total_size != fw->size)
+		return ERR_INVALID_SIZE;
+
+	/* The checksum comes at the very end. */
+	chksum_ptr = (void *)fw->data + sizeof(*header) + dmem_size + imem_size;
+
+	init->is_big_endian = is_big_endian;
+	init->dmem_len = dmem_size;
+	init->imem_len = imem_size;
+	init->chksum = (is_big_endian)
+		? be32_to_cpu(*chksum_ptr) : le32_to_cpu(*chksum_ptr);
+
+	return 0;
+}
+
+/* Verify checksum by reading back the firmware from co-processor RAM. */
+static int __verify_fw_checksum(struct init_data *init,
+				struct brcmstb_dpfe_priv *priv,
+				const struct dpfe_firmware_header *header,
+				u32 checksum)
+{
+	u32 magic, sequence, version, sum;
+	u32 __iomem *dmem = priv->dmem;
+	u32 __iomem *imem = priv->imem;
+	unsigned int i;
+
+	if (init->is_big_endian) {
+		magic = be32_to_cpu(header->magic);
+		sequence = be32_to_cpu(header->sequence);
+		version = be32_to_cpu(header->version);
+	} else {
+		magic = le32_to_cpu(header->magic);
+		sequence = le32_to_cpu(header->sequence);
+		version = le32_to_cpu(header->version);
+	}
+
+	sum = magic + sequence + version + init->dmem_len + init->imem_len;
+
+	for (i = 0; i < init->dmem_len / sizeof(u32); i++)
+		sum += readl_relaxed(dmem + i);
+
+	for (i = 0; i < init->imem_len / sizeof(u32); i++)
+		sum += readl_relaxed(imem + i);
+
+	return (sum == checksum) ? 0 : -1;
+}
+
+static int __write_firmware(u32 __iomem *mem, const u32 *fw,
+			    unsigned int size, bool is_big_endian)
+{
+	unsigned int i;
+
+	/* Convert size to 32-bit words. */
+	size /= sizeof(u32);
+
+	/* It is recommended to clear the firmware area first. */
+	for (i = 0; i < size; i++)
+		writel_relaxed(0, mem + i);
+
+	/* Now copy it. */
+	if (is_big_endian) {
+		for (i = 0; i < size; i++)
+			writel_relaxed(be32_to_cpu(fw[i]), mem + i);
+	} else {
+		for (i = 0; i < size; i++)
+			writel_relaxed(le32_to_cpu(fw[i]), mem + i);
+	}
+
+	return 0;
+}
+
+static int brcmstb_dpfe_download_firmware(struct brcmstb_dpfe_priv *priv)
+{
+	const struct dpfe_firmware_header *header;
+	unsigned int dmem_size, imem_size;
+	struct device *dev = priv->dev;
+	bool is_big_endian = false;
+	const struct firmware *fw;
+	const u32 *dmem, *imem;
+	struct init_data init;
+	const void *fw_blob;
+	int ret;
+
+	/*
+	 * Skip downloading the firmware if the DCPU is already running and
+	 * responding to commands.
+	 */
+	if (is_dcpu_enabled(priv)) {
+		u32 response[MSG_FIELD_MAX];
+
+		ret = __send_command(priv, DPFE_CMD_GET_INFO, response);
+		if (!ret)
+			return 0;
+	}
+
+	/*
+	 * If the firmware filename is NULL it means the boot firmware has to
+	 * download the DCPU firmware for us. If that didn't work, we have to
+	 * bail, since downloading it ourselves wouldn't work either.
+	 */
+	if (!priv->dpfe_api->fw_name)
+		return -ENODEV;
+
+	ret = firmware_request_nowarn(&fw, priv->dpfe_api->fw_name, dev);
+	/*
+	 * Defer the firmware download if the firmware file couldn't be found.
+	 * The root file system may not be available yet.
+	 */
+	if (ret)
+		return (ret == -ENOENT) ? -EPROBE_DEFER : ret;
+
+	ret = __verify_firmware(&init, fw);
+	if (ret) {
+		ret = -EFAULT;
+		goto release_fw;
+	}
+
+	__disable_dcpu(priv);
+
+	is_big_endian = init.is_big_endian;
+	dmem_size = init.dmem_len;
+	imem_size = init.imem_len;
+
+	/* At the beginning of the firmware blob is a header. */
+	header = (struct dpfe_firmware_header *)fw->data;
+	/* Void pointer to the beginning of the actual firmware. */
+	fw_blob = fw->data + sizeof(*header);
+	/* IMEM comes right after the header. */
+	imem = fw_blob;
+	/* DMEM follows after IMEM. */
+	dmem = fw_blob + imem_size;
+
+	ret = __write_firmware(priv->dmem, dmem, dmem_size, is_big_endian);
+	if (ret)
+		goto release_fw;
+	ret = __write_firmware(priv->imem, imem, imem_size, is_big_endian);
+	if (ret)
+		goto release_fw;
+
+	ret = __verify_fw_checksum(&init, priv, header, init.chksum);
+	if (ret)
+		goto release_fw;
+
+	__enable_dcpu(priv);
+
+release_fw:
+	release_firmware(fw);
+	return ret;
+}
+
+static ssize_t generic_show(unsigned int command, u32 response[],
+			    struct brcmstb_dpfe_priv *priv, char *buf)
+{
+	int ret;
+
+	if (!priv)
+		return sprintf(buf, "ERROR: driver private data not set\n");
+
+	ret = __send_command(priv, command, response);
+	if (ret < 0)
+		return sprintf(buf, "ERROR: %s\n", get_error_text(-ret));
+
+	return 0;
+}
+
+static ssize_t show_info(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	u32 response[MSG_FIELD_MAX];
+	struct brcmstb_dpfe_priv *priv;
+	unsigned int info;
+	ssize_t ret;
+
+	priv = dev_get_drvdata(dev);
+	ret = generic_show(DPFE_CMD_GET_INFO, response, priv, buf);
+	if (ret)
+		return ret;
+
+	info = response[MSG_ARG0];
+
+	return sprintf(buf, "%u.%u.%u.%u\n",
+		       (info >> 24) & 0xff,
+		       (info >> 16) & 0xff,
+		       (info >> 8) & 0xff,
+		       info & 0xff);
+}
+
+static ssize_t show_refresh(struct device *dev,
+			    struct device_attribute *devattr, char *buf)
+{
+	u32 response[MSG_FIELD_MAX];
+	void __iomem *info;
+	struct brcmstb_dpfe_priv *priv;
+	u8 refresh, sr_abort, ppre, thermal_offs, tuf;
+	u32 mr4;
+	ssize_t ret;
+
+	priv = dev_get_drvdata(dev);
+	ret = generic_show(DPFE_CMD_GET_REFRESH, response, priv, buf);
+	if (ret)
+		return ret;
+
+	info = get_msg_ptr(priv, response[MSG_ARG0], buf, &ret);
+	if (!info)
+		return ret;
+
+	mr4 = (readl_relaxed(info + DRAM_INFO_MR4) >> DRAM_INFO_MR4_SHIFT) &
+	       DRAM_INFO_MR4_MASK;
+
+	refresh = (mr4 >> DRAM_MR4_REFRESH) & DRAM_MR4_REFRESH_MASK;
+	sr_abort = (mr4 >> DRAM_MR4_SR_ABORT) & DRAM_MR4_SR_ABORT_MASK;
+	ppre = (mr4 >> DRAM_MR4_PPRE) & DRAM_MR4_PPRE_MASK;
+	thermal_offs = (mr4 >> DRAM_MR4_TH_OFFS) & DRAM_MR4_TH_OFFS_MASK;
+	tuf = (mr4 >> DRAM_MR4_TUF) & DRAM_MR4_TUF_MASK;
+
+	return sprintf(buf, "%#x %#x %#x %#x %#x %#x %#x\n",
+		       readl_relaxed(info + DRAM_INFO_INTERVAL),
+		       refresh, sr_abort, ppre, thermal_offs, tuf,
+		       readl_relaxed(info + DRAM_INFO_ERROR));
+}
+
+static ssize_t store_refresh(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	u32 response[MSG_FIELD_MAX];
+	struct brcmstb_dpfe_priv *priv;
+	void __iomem *info;
+	unsigned long val;
+	int ret;
+
+	if (kstrtoul(buf, 0, &val) < 0)
+		return -EINVAL;
+
+	priv = dev_get_drvdata(dev);
+	ret = __send_command(priv, DPFE_CMD_GET_REFRESH, response);
+	if (ret)
+		return ret;
+
+	info = get_msg_ptr(priv, response[MSG_ARG0], NULL, NULL);
+	if (!info)
+		return -EIO;
+
+	writel_relaxed(val, info + DRAM_INFO_INTERVAL);
+
+	return count;
+}
+
+static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,
+			   char *buf)
+{
+	u32 response[MSG_FIELD_MAX];
+	struct brcmstb_dpfe_priv *priv;
+	void __iomem *info;
+	ssize_t ret;
+	u32 mr5, mr6, mr7, mr8, err;
+
+	priv = dev_get_drvdata(dev);
+	ret = generic_show(DPFE_CMD_GET_VENDOR, response, priv, buf);
+	if (ret)
+		return ret;
+
+	info = get_msg_ptr(priv, response[MSG_ARG0], buf, &ret);
+	if (!info)
+		return ret;
+
+	mr5 = (readl_relaxed(info + DRAM_VENDOR_MR5) >> DRAM_VENDOR_SHIFT) &
+		DRAM_VENDOR_MASK;
+	mr6 = (readl_relaxed(info + DRAM_VENDOR_MR6) >> DRAM_VENDOR_SHIFT) &
+		DRAM_VENDOR_MASK;
+	mr7 = (readl_relaxed(info + DRAM_VENDOR_MR7) >> DRAM_VENDOR_SHIFT) &
+		DRAM_VENDOR_MASK;
+	mr8 = (readl_relaxed(info + DRAM_VENDOR_MR8) >> DRAM_VENDOR_SHIFT) &
+		DRAM_VENDOR_MASK;
+	err = readl_relaxed(info + DRAM_VENDOR_ERROR) & DRAM_VENDOR_MASK;
+
+	return sprintf(buf, "%#x %#x %#x %#x %#x\n", mr5, mr6, mr7, mr8, err);
+}
+
+static ssize_t show_dram(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	u32 response[MSG_FIELD_MAX];
+	struct brcmstb_dpfe_priv *priv;
+	ssize_t ret;
+	u32 mr4, mr5, mr6, mr7, mr8, err;
+
+	priv = dev_get_drvdata(dev);
+	ret = generic_show(DPFE_CMD_GET_REFRESH, response, priv, buf);
+	if (ret)
+		return ret;
+
+	mr4 = response[MSG_ARG0 + 0] & DRAM_INFO_MR4_MASK;
+	mr5 = response[MSG_ARG0 + 1] & DRAM_DDR_INFO_MASK;
+	mr6 = response[MSG_ARG0 + 2] & DRAM_DDR_INFO_MASK;
+	mr7 = response[MSG_ARG0 + 3] & DRAM_DDR_INFO_MASK;
+	mr8 = response[MSG_ARG0 + 4] & DRAM_DDR_INFO_MASK;
+	err = response[MSG_ARG0 + 5] & DRAM_DDR_INFO_MASK;
+
+	return sprintf(buf, "%#x %#x %#x %#x %#x %#x\n", mr4, mr5, mr6, mr7,
+			mr8, err);
+}
+
+static int brcmstb_dpfe_resume(struct platform_device *pdev)
+{
+	struct brcmstb_dpfe_priv *priv = platform_get_drvdata(pdev);
+
+	return brcmstb_dpfe_download_firmware(priv);
+}
+
+static int brcmstb_dpfe_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct brcmstb_dpfe_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+
+	mutex_init(&priv->lock);
+	platform_set_drvdata(pdev, priv);
+
+	priv->regs = devm_platform_ioremap_resource_byname(pdev, "dpfe-cpu");
+	if (IS_ERR(priv->regs)) {
+		dev_err(dev, "couldn't map DCPU registers\n");
+		return -ENODEV;
+	}
+
+	priv->dmem = devm_platform_ioremap_resource_byname(pdev, "dpfe-dmem");
+	if (IS_ERR(priv->dmem)) {
+		dev_err(dev, "Couldn't map DCPU data memory\n");
+		return -ENOENT;
+	}
+
+	priv->imem = devm_platform_ioremap_resource_byname(pdev, "dpfe-imem");
+	if (IS_ERR(priv->imem)) {
+		dev_err(dev, "Couldn't map DCPU instruction memory\n");
+		return -ENOENT;
+	}
+
+	priv->dpfe_api = of_device_get_match_data(dev);
+	if (unlikely(!priv->dpfe_api)) {
+		/*
+		 * It should be impossible to end up here, but to be safe we
+		 * check anyway.
+		 */
+		dev_err(dev, "Couldn't determine API\n");
+		return -ENOENT;
+	}
+
+	ret = brcmstb_dpfe_download_firmware(priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "Couldn't download firmware\n");
+
+	ret = sysfs_create_groups(&pdev->dev.kobj, priv->dpfe_api->sysfs_attrs);
+	if (!ret)
+		dev_info(dev, "registered with API v%d.\n",
+			 priv->dpfe_api->version);
+
+	return ret;
+}
+
+static void brcmstb_dpfe_remove(struct platform_device *pdev)
+{
+	struct brcmstb_dpfe_priv *priv = dev_get_drvdata(&pdev->dev);
+
+	sysfs_remove_groups(&pdev->dev.kobj, priv->dpfe_api->sysfs_attrs);
+}
+
+static const struct of_device_id brcmstb_dpfe_of_match[] = {
+	/* Use legacy API v2 for a select number of chips */
+	{ .compatible = "brcm,bcm7268-dpfe-cpu", .data = &dpfe_api_old_v2 },
+	{ .compatible = "brcm,bcm7271-dpfe-cpu", .data = &dpfe_api_old_v2 },
+	{ .compatible = "brcm,bcm7278-dpfe-cpu", .data = &dpfe_api_old_v2 },
+	{ .compatible = "brcm,bcm7211-dpfe-cpu", .data = &dpfe_api_new_v2 },
+	/* API v3 is the default going forward */
+	{ .compatible = "brcm,dpfe-cpu", .data = &dpfe_api_v3 },
+	{}
+};
+MODULE_DEVICE_TABLE(of, brcmstb_dpfe_of_match);
+
+static struct platform_driver brcmstb_dpfe_driver = {
+	.driver	= {
+		.name = DRVNAME,
+		.of_match_table = brcmstb_dpfe_of_match,
+	},
+	.probe = brcmstb_dpfe_probe,
+	.remove = brcmstb_dpfe_remove,
+	.resume = brcmstb_dpfe_resume,
+};
+
+module_platform_driver(brcmstb_dpfe_driver);
+
+MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>");
+MODULE_DESCRIPTION("BRCMSTB DDR PHY Front End Driver");
+MODULE_LICENSE("GPL");

linux-7.2.3/drivers/memory/brcmstb_memc.c

@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * DDR Self-Refresh Power Down (SRPD) support for Broadcom STB SoCs
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+#define REG_MEMC_CNTRLR_CONFIG		0x00
+#define  CNTRLR_CONFIG_LPDDR4_SHIFT	5
+#define  CNTRLR_CONFIG_LPDDR5_SHIFT	6
+#define  CNTRLR_CONFIG_MASK		0xf
+#define REG_MEMC_SRPD_CFG_21		0x20
+#define REG_MEMC_SRPD_CFG_20		0x34
+#define REG_MEMC_SRPD_CFG_1x		0x3c
+#define INACT_COUNT_SHIFT		0
+#define INACT_COUNT_MASK		0xffff
+#define SRPD_EN_SHIFT			16
+
+struct brcmstb_memc_data {
+	u32 srpd_offset;
+};
+
+struct brcmstb_memc {
+	struct device *dev;
+	void __iomem *ddr_ctrl;
+	unsigned int timeout_cycles;
+	u32 frequency;
+	u32 srpd_offset;
+};
+
+static int brcmstb_memc_uses_lpddr45(struct brcmstb_memc *memc)
+{
+	void __iomem *config = memc->ddr_ctrl + REG_MEMC_CNTRLR_CONFIG;
+	u32 reg;
+
+	reg = readl_relaxed(config) & CNTRLR_CONFIG_MASK;
+
+	return reg == CNTRLR_CONFIG_LPDDR4_SHIFT ||
+	       reg == CNTRLR_CONFIG_LPDDR5_SHIFT;
+}
+
+static int brcmstb_memc_srpd_config(struct brcmstb_memc *memc,
+				    unsigned int cycles)
+{
+	void __iomem *cfg = memc->ddr_ctrl + memc->srpd_offset;
+	u32 val;
+
+	/* Max timeout supported in HW */
+	if (cycles > INACT_COUNT_MASK)
+		return -EINVAL;
+
+	memc->timeout_cycles = cycles;
+
+	val = (cycles << INACT_COUNT_SHIFT) & INACT_COUNT_MASK;
+	if (cycles)
+		val |= BIT(SRPD_EN_SHIFT);
+
+	writel_relaxed(val, cfg);
+	/* Ensure the write is committed to the controller */
+	(void)readl_relaxed(cfg);
+
+	return 0;
+}
+
+static ssize_t frequency_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct brcmstb_memc *memc = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", memc->frequency);
+}
+
+static ssize_t srpd_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct brcmstb_memc *memc = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", memc->timeout_cycles);
+}
+
+static ssize_t srpd_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct brcmstb_memc *memc = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret;
+
+	/*
+	 * Cannot change the inactivity timeout on LPDDR4 chips because the
+	 * dynamic tuning process will also get affected by the inactivity
+	 * timeout, thus making it non functional.
+	 */
+	if (brcmstb_memc_uses_lpddr45(memc))
+		return -EOPNOTSUPP;
+
+	ret = kstrtouint(buf, 10, &val);
+	if (ret < 0)
+		return ret;
+
+	ret = brcmstb_memc_srpd_config(memc, val);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR_RO(frequency);
+static DEVICE_ATTR_RW(srpd);
+
+static struct attribute *dev_attrs[] = {
+	&dev_attr_frequency.attr,
+	&dev_attr_srpd.attr,
+	NULL,
+};
+
+static struct attribute_group dev_attr_group = {
+	.attrs = dev_attrs,
+};
+
+static int brcmstb_memc_probe(struct platform_device *pdev)
+{
+	const struct brcmstb_memc_data *memc_data;
+	struct device *dev = &pdev->dev;
+	struct brcmstb_memc *memc;
+	int ret;
+
+	memc = devm_kzalloc(dev, sizeof(*memc), GFP_KERNEL);
+	if (!memc)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, memc);
+
+	memc_data = device_get_match_data(dev);
+	memc->srpd_offset = memc_data->srpd_offset;
+
+	memc->ddr_ctrl = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(memc->ddr_ctrl))
+		return PTR_ERR(memc->ddr_ctrl);
+
+	of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+			     &memc->frequency);
+
+	ret = sysfs_create_group(&dev->kobj, &dev_attr_group);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void brcmstb_memc_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	sysfs_remove_group(&dev->kobj, &dev_attr_group);
+}
+
+enum brcmstb_memc_hwtype {
+	BRCMSTB_MEMC_V21,
+	BRCMSTB_MEMC_V20,
+	BRCMSTB_MEMC_V1X,
+};
+
+static const struct brcmstb_memc_data brcmstb_memc_versions[] = {
+	{ .srpd_offset = REG_MEMC_SRPD_CFG_21 },
+	{ .srpd_offset = REG_MEMC_SRPD_CFG_20 },
+	{ .srpd_offset = REG_MEMC_SRPD_CFG_1x },
+};
+
+static const struct of_device_id brcmstb_memc_of_match[] = {
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V1X]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.0",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V20]
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.1",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	/* default to the V21 offset */
+	{
+		.compatible = "brcm,brcmstb-memc-ddr",
+		.data = &brcmstb_memc_versions[BRCMSTB_MEMC_V21]
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, brcmstb_memc_of_match);
+
+static int brcmstb_memc_suspend(struct device *dev)
+{
+	struct brcmstb_memc *memc = dev_get_drvdata(dev);
+	void __iomem *cfg = memc->ddr_ctrl + memc->srpd_offset;
+	u32 val;
+
+	if (memc->timeout_cycles == 0)
+		return 0;
+
+	/*
+	 * Disable SRPD prior to suspending the system since that can
+	 * cause issues with other memory clients managed by the ARM
+	 * trusted firmware to access memory.
+	 */
+	val = readl_relaxed(cfg);
+	val &= ~BIT(SRPD_EN_SHIFT);
+	writel_relaxed(val, cfg);
+	/* Ensure the write is committed to the controller */
+	(void)readl_relaxed(cfg);
+
+	return 0;
+}
+
+static int brcmstb_memc_resume(struct device *dev)
+{
+	struct brcmstb_memc *memc = dev_get_drvdata(dev);
+
+	if (memc->timeout_cycles == 0)
+		return 0;
+
+	return brcmstb_memc_srpd_config(memc, memc->timeout_cycles);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(brcmstb_memc_pm_ops, brcmstb_memc_suspend,
+				brcmstb_memc_resume);
+
+static struct platform_driver brcmstb_memc_driver = {
+	.probe = brcmstb_memc_probe,
+	.remove = brcmstb_memc_remove,
+	.driver = {
+		.name		= "brcmstb_memc",
+		.of_match_table	= brcmstb_memc_of_match,
+		.pm		= pm_ptr(&brcmstb_memc_pm_ops),
+	},
+};
+module_platform_driver(brcmstb_memc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("DDR SRPD driver for Broadcom STB chips");

linux-7.2.3/drivers/memory/da8xx-ddrctl.c

@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI da8xx DDR2/mDDR controller driver
+ *
+ * Copyright (C) 2016 BayLibre SAS
+ *
+ * Author:
+ *   Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+/*
+ * REVISIT: Linux doesn't have a good framework for the kind of performance
+ * knobs this driver controls. We can't use device tree properties as it deals
+ * with hardware configuration rather than description. We also don't want to
+ * commit to maintaining some random sysfs attributes.
+ *
+ * For now we just hardcode the register values for the boards that need
+ * some changes (as is the case for the LCD controller on da850-lcdk - the
+ * first board we support here). When linux gets an appropriate framework,
+ * we'll easily convert the driver to it.
+ */
+
+struct da8xx_ddrctl_config_knob {
+	const char *name;
+	u32 reg;
+	u32 mask;
+	u32 shift;
+};
+
+static const struct da8xx_ddrctl_config_knob da8xx_ddrctl_knobs[] = {
+	{
+		.name = "da850-pbbpr",
+		.reg = 0x20,
+		.mask = 0xffffff00,
+		.shift = 0,
+	},
+};
+
+struct da8xx_ddrctl_setting {
+	const char *name;
+	u32 val;
+};
+
+struct da8xx_ddrctl_board_settings {
+	const char *board;
+	const struct da8xx_ddrctl_setting *settings;
+};
+
+static const struct da8xx_ddrctl_setting da850_lcdk_ddrctl_settings[] = {
+	{
+		.name = "da850-pbbpr",
+		.val = 0x20,
+	},
+	{ }
+};
+
+static const struct da8xx_ddrctl_board_settings da8xx_ddrctl_board_confs[] = {
+	{
+		.board = "ti,da850-lcdk",
+		.settings = da850_lcdk_ddrctl_settings,
+	},
+};
+
+static const struct da8xx_ddrctl_config_knob *
+da8xx_ddrctl_match_knob(const struct da8xx_ddrctl_setting *setting)
+{
+	const struct da8xx_ddrctl_config_knob *knob;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(da8xx_ddrctl_knobs); i++) {
+		knob = &da8xx_ddrctl_knobs[i];
+
+		if (strcmp(knob->name, setting->name) == 0)
+			return knob;
+	}
+
+	return NULL;
+}
+
+static const struct da8xx_ddrctl_setting *da8xx_ddrctl_get_board_settings(void)
+{
+	const struct da8xx_ddrctl_board_settings *board_settings;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(da8xx_ddrctl_board_confs); i++) {
+		board_settings = &da8xx_ddrctl_board_confs[i];
+
+		if (of_machine_is_compatible(board_settings->board))
+			return board_settings->settings;
+	}
+
+	return NULL;
+}
+
+static int da8xx_ddrctl_probe(struct platform_device *pdev)
+{
+	const struct da8xx_ddrctl_config_knob *knob;
+	const struct da8xx_ddrctl_setting *setting;
+	struct resource *res;
+	void __iomem *ddrctl;
+	struct device *dev;
+	u32 reg;
+
+	dev = &pdev->dev;
+
+	setting = da8xx_ddrctl_get_board_settings();
+	if (!setting) {
+		dev_err(dev, "no settings defined for this board\n");
+		return -EINVAL;
+	}
+
+	ddrctl = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(ddrctl)) {
+		dev_err(dev, "unable to map memory controller registers\n");
+		return PTR_ERR(ddrctl);
+	}
+
+	for (; setting->name; setting++) {
+		knob = da8xx_ddrctl_match_knob(setting);
+		if (!knob) {
+			dev_warn(dev,
+				 "no such config option: %s\n", setting->name);
+			continue;
+		}
+
+		if (knob->reg + sizeof(u32) > resource_size(res)) {
+			dev_warn(dev,
+				 "register offset of '%s' exceeds mapped memory size\n",
+				 knob->name);
+			continue;
+		}
+
+		reg = readl(ddrctl + knob->reg);
+		reg &= knob->mask;
+		reg |= setting->val << knob->shift;
+
+		dev_dbg(dev, "writing 0x%08x to %s\n", reg, setting->name);
+
+		writel(reg, ddrctl + knob->reg);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id da8xx_ddrctl_of_match[] = {
+	{ .compatible = "ti,da850-ddr-controller", },
+	{ },
+};
+
+static struct platform_driver da8xx_ddrctl_driver = {
+	.probe = da8xx_ddrctl_probe,
+	.driver = {
+		.name = "da850-ddr-controller",
+		.of_match_table = da8xx_ddrctl_of_match,
+	},
+};
+module_platform_driver(da8xx_ddrctl_driver);
+
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_DESCRIPTION("TI da8xx DDR2/mDDR controller driver");

linux-7.2.3/drivers/memory/dfl-emif.c

@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DFL device driver for EMIF private feature
+ *
+ * Copyright (C) 2020 Intel Corporation, Inc.
+ *
+ */
+#include <linux/bitfield.h>
+#include <linux/dfl.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#define FME_FEATURE_ID_EMIF		0x9
+
+#define EMIF_STAT			0x8
+#define EMIF_STAT_INIT_DONE_SFT		0
+#define EMIF_STAT_CALC_FAIL_SFT		8
+#define EMIF_STAT_CLEAR_BUSY_SFT	16
+#define EMIF_CTRL			0x10
+#define EMIF_CTRL_CLEAR_EN_SFT		0
+#define EMIF_CTRL_CLEAR_EN_MSK		GENMASK_ULL(7, 0)
+
+#define EMIF_POLL_INVL			10000 /* us */
+#define EMIF_POLL_TIMEOUT		5000000 /* us */
+
+/*
+ * The Capability Register replaces the Control Register (at the same
+ * offset) for EMIF feature revisions > 0. The bitmask that indicates
+ * the presence of memory channels exists in both the Capability Register
+ * and Control Register definitions. These can be thought of as a C union.
+ * The Capability Register definitions are used to check for the existence
+ * of a memory channel, and the Control Register definitions are used for
+ * managing the memory-clear functionality in revision 0.
+ */
+#define EMIF_CAPABILITY_BASE		0x10
+#define EMIF_CAPABILITY_CHN_MSK_V0	GENMASK_ULL(3, 0)
+#define EMIF_CAPABILITY_CHN_MSK		GENMASK_ULL(7, 0)
+
+struct dfl_emif {
+	struct device *dev;
+	void __iomem *base;
+	spinlock_t lock;	/* Serialises access to EMIF_CTRL reg */
+};
+
+struct emif_attr {
+	struct device_attribute attr;
+	u32 shift;
+	u32 index;
+};
+
+#define to_emif_attr(dev_attr) \
+	container_of(dev_attr, struct emif_attr, attr)
+
+static ssize_t emif_state_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct emif_attr *eattr = to_emif_attr(attr);
+	struct dfl_emif *de = dev_get_drvdata(dev);
+	u64 val;
+
+	val = readq(de->base + EMIF_STAT);
+
+	return sysfs_emit(buf, "%u\n",
+			  !!(val & BIT_ULL(eattr->shift + eattr->index)));
+}
+
+static ssize_t emif_clear_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct emif_attr *eattr = to_emif_attr(attr);
+	struct dfl_emif *de = dev_get_drvdata(dev);
+	u64 clear_busy_msk, clear_en_msk, val;
+	void __iomem *base = de->base;
+
+	if (!sysfs_streq(buf, "1"))
+		return -EINVAL;
+
+	clear_busy_msk = BIT_ULL(EMIF_STAT_CLEAR_BUSY_SFT + eattr->index);
+	clear_en_msk = BIT_ULL(EMIF_CTRL_CLEAR_EN_SFT + eattr->index);
+
+	spin_lock(&de->lock);
+	/* The CLEAR_EN field is WO, but other fields are RW */
+	val = readq(base + EMIF_CTRL);
+	val &= ~EMIF_CTRL_CLEAR_EN_MSK;
+	val |= clear_en_msk;
+	writeq(val, base + EMIF_CTRL);
+	spin_unlock(&de->lock);
+
+	if (readq_poll_timeout(base + EMIF_STAT, val,
+			       !(val & clear_busy_msk),
+			       EMIF_POLL_INVL, EMIF_POLL_TIMEOUT)) {
+		dev_err(de->dev, "timeout, fail to clear\n");
+		return -ETIMEDOUT;
+	}
+
+	return count;
+}
+
+#define emif_state_attr(_name, _shift, _index)				\
+	static struct emif_attr emif_attr_##inf##_index##_##_name =	\
+		{ .attr = __ATTR(inf##_index##_##_name, 0444,		\
+				 emif_state_show, NULL),		\
+		  .shift = (_shift), .index = (_index) }
+
+#define emif_clear_attr(_index)						\
+	static struct emif_attr emif_attr_##inf##_index##_clear =	\
+		{ .attr = __ATTR(inf##_index##_clear, 0200,		\
+				 NULL, emif_clear_store),		\
+		  .index = (_index) }
+
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 0);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 1);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 2);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 3);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 4);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 5);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 6);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 7);
+
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 0);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 1);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 2);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 3);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 4);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 5);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 6);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 7);
+
+
+emif_clear_attr(0);
+emif_clear_attr(1);
+emif_clear_attr(2);
+emif_clear_attr(3);
+emif_clear_attr(4);
+emif_clear_attr(5);
+emif_clear_attr(6);
+emif_clear_attr(7);
+
+
+static struct attribute *dfl_emif_attrs[] = {
+	&emif_attr_inf0_init_done.attr.attr,
+	&emif_attr_inf0_cal_fail.attr.attr,
+	&emif_attr_inf0_clear.attr.attr,
+
+	&emif_attr_inf1_init_done.attr.attr,
+	&emif_attr_inf1_cal_fail.attr.attr,
+	&emif_attr_inf1_clear.attr.attr,
+
+	&emif_attr_inf2_init_done.attr.attr,
+	&emif_attr_inf2_cal_fail.attr.attr,
+	&emif_attr_inf2_clear.attr.attr,
+
+	&emif_attr_inf3_init_done.attr.attr,
+	&emif_attr_inf3_cal_fail.attr.attr,
+	&emif_attr_inf3_clear.attr.attr,
+
+	&emif_attr_inf4_init_done.attr.attr,
+	&emif_attr_inf4_cal_fail.attr.attr,
+	&emif_attr_inf4_clear.attr.attr,
+
+	&emif_attr_inf5_init_done.attr.attr,
+	&emif_attr_inf5_cal_fail.attr.attr,
+	&emif_attr_inf5_clear.attr.attr,
+
+	&emif_attr_inf6_init_done.attr.attr,
+	&emif_attr_inf6_cal_fail.attr.attr,
+	&emif_attr_inf6_clear.attr.attr,
+
+	&emif_attr_inf7_init_done.attr.attr,
+	&emif_attr_inf7_cal_fail.attr.attr,
+	&emif_attr_inf7_clear.attr.attr,
+
+	NULL,
+};
+
+static umode_t dfl_emif_visible(struct kobject *kobj,
+				struct attribute *attr, int n)
+{
+	struct dfl_emif *de = dev_get_drvdata(kobj_to_dev(kobj));
+	struct emif_attr *eattr = container_of(attr, struct emif_attr,
+					       attr.attr);
+	struct dfl_device *ddev = to_dfl_dev(de->dev);
+	u64 val;
+
+	/*
+	 * This device supports up to 8 memory interfaces, but not all
+	 * interfaces are used on different platforms. The read out value of
+	 * CAPABILITY_CHN_MSK field (which is a bitmap) indicates which
+	 * interfaces are available.
+	 */
+	if (ddev->revision > 0 && strstr(attr->name, "_clear"))
+		return 0;
+
+	if (ddev->revision == 0)
+		val = FIELD_GET(EMIF_CAPABILITY_CHN_MSK_V0,
+				readq(de->base + EMIF_CAPABILITY_BASE));
+	else
+		val = FIELD_GET(EMIF_CAPABILITY_CHN_MSK,
+				readq(de->base + EMIF_CAPABILITY_BASE));
+
+	return (val & BIT_ULL(eattr->index)) ? attr->mode : 0;
+}
+
+static const struct attribute_group dfl_emif_group = {
+	.is_visible = dfl_emif_visible,
+	.attrs = dfl_emif_attrs,
+};
+
+static const struct attribute_group *dfl_emif_groups[] = {
+	&dfl_emif_group,
+	NULL,
+};
+
+static int dfl_emif_probe(struct dfl_device *ddev)
+{
+	struct device *dev = &ddev->dev;
+	struct dfl_emif *de;
+
+	de = devm_kzalloc(dev, sizeof(*de), GFP_KERNEL);
+	if (!de)
+		return -ENOMEM;
+
+	de->base = devm_ioremap_resource(dev, &ddev->mmio_res);
+	if (IS_ERR(de->base))
+		return PTR_ERR(de->base);
+
+	de->dev = dev;
+	spin_lock_init(&de->lock);
+	dev_set_drvdata(dev, de);
+
+	return 0;
+}
+
+static const struct dfl_device_id dfl_emif_ids[] = {
+	{ FME_ID, FME_FEATURE_ID_EMIF },
+	{ }
+};
+MODULE_DEVICE_TABLE(dfl, dfl_emif_ids);
+
+static struct dfl_driver dfl_emif_driver = {
+	.drv	= {
+		.name       = "dfl-emif",
+		.dev_groups = dfl_emif_groups,
+	},
+	.id_table = dfl_emif_ids,
+	.probe   = dfl_emif_probe,
+};
+module_dfl_driver(dfl_emif_driver);
+
+MODULE_DESCRIPTION("DFL EMIF driver");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");

linux-7.2.3/drivers/memory/emif-asm-offsets.c

@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI AM33XX EMIF PM Assembly Offsets
+ *
+ * Copyright (C) 2016-2017 Texas Instruments Inc.
+ */
+#include <linux/ti-emif-sram.h>
+
+int main(void)
+{
+	ti_emif_asm_offsets();
+
+	return 0;
+}

linux-7.2.3/drivers/memory/emif.h

@@ -0,0 +1,607 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Defines for the EMIF driver
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ */
+#ifndef __EMIF_H
+#define __EMIF_H
+
+/*
+ * Maximum number of different frequencies supported by EMIF driver
+ * Determines the number of entries in the pointer array for register
+ * cache
+ */
+#define EMIF_MAX_NUM_FREQUENCIES			6
+
+/* State of the core voltage */
+#define DDR_VOLTAGE_STABLE				0
+#define DDR_VOLTAGE_RAMPING				1
+
+/* Defines for timing De-rating */
+#define EMIF_NORMAL_TIMINGS				0
+#define EMIF_DERATED_TIMINGS				1
+
+/* Length of the forced read idle period in terms of cycles */
+#define EMIF_READ_IDLE_LEN_VAL				5
+
+/*
+ * forced read idle interval to be used when voltage
+ * is changed as part of DVFS/DPS - 1ms
+ */
+#define READ_IDLE_INTERVAL_DVFS				(1*1000000)
+
+/*
+ * Forced read idle interval to be used when voltage is stable
+ * 50us - or maximum value will do
+ */
+#define READ_IDLE_INTERVAL_NORMAL			(50*1000000)
+
+/* DLL calibration interval when voltage is NOT stable - 1us */
+#define DLL_CALIB_INTERVAL_DVFS				(1*1000000)
+
+#define DLL_CALIB_ACK_WAIT_VAL				5
+
+/* Interval between ZQCS commands - hw team recommended value */
+#define EMIF_ZQCS_INTERVAL_US				(50*1000)
+/* Enable ZQ Calibration on exiting Self-refresh */
+#define ZQ_SFEXITEN_ENABLE				1
+/*
+ * ZQ Calibration simultaneously on both chip-selects:
+ * Needs one calibration resistor per CS
+ */
+#define	ZQ_DUALCALEN_DISABLE				0
+#define	ZQ_DUALCALEN_ENABLE				1
+
+#define T_ZQCS_DEFAULT_NS				90
+#define T_ZQCL_DEFAULT_NS				360
+#define T_ZQINIT_DEFAULT_NS				1000
+
+/* DPD_EN */
+#define DPD_DISABLE					0
+#define DPD_ENABLE					1
+
+/*
+ * Default values for the low-power entry to be used if not provided by user.
+ * OMAP4/5 has a hw bug(i735) due to which this value can not be less than 512
+ * Timeout values are in DDR clock 'cycles' and frequency threshold in Hz
+ */
+#define EMIF_LP_MODE_TIMEOUT_PERFORMANCE		2048
+#define EMIF_LP_MODE_TIMEOUT_POWER			512
+#define EMIF_LP_MODE_FREQ_THRESHOLD			400000000
+
+/* DDR_PHY_CTRL_1 values for EMIF4D - ATTILA PHY combination */
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_ATTILAPHY		0x049FF000
+#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ_ATTILAPHY	0x41
+#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ_ATTILAPHY	0x80
+#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS_ATTILAPHY 0xFF
+
+/* DDR_PHY_CTRL_1 values for EMIF4D5 INTELLIPHY combination */
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY		0x0E084200
+#define EMIF_PHY_TOTAL_READ_LATENCY_INTELLIPHY_PS	10000
+
+/* TEMP_ALERT_CONFIG - corresponding to temp gradient 5 C/s */
+#define TEMP_ALERT_POLL_INTERVAL_DEFAULT_MS		360
+
+#define EMIF_T_CSTA					3
+#define EMIF_T_PDLL_UL					128
+
+/* External PHY control registers magic values */
+#define EMIF_EXT_PHY_CTRL_1_VAL				0x04020080
+#define EMIF_EXT_PHY_CTRL_5_VAL				0x04010040
+#define EMIF_EXT_PHY_CTRL_6_VAL				0x01004010
+#define EMIF_EXT_PHY_CTRL_7_VAL				0x00001004
+#define EMIF_EXT_PHY_CTRL_8_VAL				0x04010040
+#define EMIF_EXT_PHY_CTRL_9_VAL				0x01004010
+#define EMIF_EXT_PHY_CTRL_10_VAL			0x00001004
+#define EMIF_EXT_PHY_CTRL_11_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_12_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_13_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_14_VAL			0x80080080
+#define EMIF_EXT_PHY_CTRL_15_VAL			0x00800800
+#define EMIF_EXT_PHY_CTRL_16_VAL			0x08102040
+#define EMIF_EXT_PHY_CTRL_17_VAL			0x00000001
+#define EMIF_EXT_PHY_CTRL_18_VAL			0x540A8150
+#define EMIF_EXT_PHY_CTRL_19_VAL			0xA81502A0
+#define EMIF_EXT_PHY_CTRL_20_VAL			0x002A0540
+#define EMIF_EXT_PHY_CTRL_21_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_22_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_23_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_24_VAL			0x00000077
+
+#define EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS	1200
+
+/* Registers offset */
+#define EMIF_MODULE_ID_AND_REVISION			0x0000
+#define EMIF_STATUS					0x0004
+#define EMIF_SDRAM_CONFIG				0x0008
+#define EMIF_SDRAM_CONFIG_2				0x000c
+#define EMIF_SDRAM_REFRESH_CONTROL			0x0010
+#define EMIF_SDRAM_REFRESH_CTRL_SHDW			0x0014
+#define EMIF_SDRAM_TIMING_1				0x0018
+#define EMIF_SDRAM_TIMING_1_SHDW			0x001c
+#define EMIF_SDRAM_TIMING_2				0x0020
+#define EMIF_SDRAM_TIMING_2_SHDW			0x0024
+#define EMIF_SDRAM_TIMING_3				0x0028
+#define EMIF_SDRAM_TIMING_3_SHDW			0x002c
+#define EMIF_LPDDR2_NVM_TIMING				0x0030
+#define EMIF_LPDDR2_NVM_TIMING_SHDW			0x0034
+#define EMIF_POWER_MANAGEMENT_CONTROL			0x0038
+#define EMIF_POWER_MANAGEMENT_CTRL_SHDW			0x003c
+#define EMIF_LPDDR2_MODE_REG_DATA			0x0040
+#define EMIF_LPDDR2_MODE_REG_CONFIG			0x0050
+#define EMIF_OCP_CONFIG					0x0054
+#define EMIF_OCP_CONFIG_VALUE_1				0x0058
+#define EMIF_OCP_CONFIG_VALUE_2				0x005c
+#define EMIF_IODFT_TEST_LOGIC_GLOBAL_CONTROL		0x0060
+#define EMIF_IODFT_TEST_LOGIC_CTRL_MISR_RESULT		0x0064
+#define EMIF_IODFT_TEST_LOGIC_ADDRESS_MISR_RESULT	0x0068
+#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_1	0x006c
+#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_2	0x0070
+#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_3	0x0074
+#define EMIF_PERFORMANCE_COUNTER_1			0x0080
+#define EMIF_PERFORMANCE_COUNTER_2			0x0084
+#define EMIF_PERFORMANCE_COUNTER_CONFIG			0x0088
+#define EMIF_PERFORMANCE_COUNTER_MASTER_REGION_SELECT	0x008c
+#define EMIF_PERFORMANCE_COUNTER_TIME			0x0090
+#define EMIF_MISC_REG					0x0094
+#define EMIF_DLL_CALIB_CTRL				0x0098
+#define EMIF_DLL_CALIB_CTRL_SHDW			0x009c
+#define EMIF_END_OF_INTERRUPT				0x00a0
+#define EMIF_SYSTEM_OCP_INTERRUPT_RAW_STATUS		0x00a4
+#define EMIF_LL_OCP_INTERRUPT_RAW_STATUS		0x00a8
+#define EMIF_SYSTEM_OCP_INTERRUPT_STATUS		0x00ac
+#define EMIF_LL_OCP_INTERRUPT_STATUS			0x00b0
+#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET		0x00b4
+#define EMIF_LL_OCP_INTERRUPT_ENABLE_SET		0x00b8
+#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_CLEAR		0x00bc
+#define EMIF_LL_OCP_INTERRUPT_ENABLE_CLEAR		0x00c0
+#define EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG	0x00c8
+#define EMIF_TEMPERATURE_ALERT_CONFIG			0x00cc
+#define EMIF_OCP_ERROR_LOG				0x00d0
+#define EMIF_READ_WRITE_LEVELING_RAMP_WINDOW		0x00d4
+#define EMIF_READ_WRITE_LEVELING_RAMP_CONTROL		0x00d8
+#define EMIF_READ_WRITE_LEVELING_CONTROL		0x00dc
+#define EMIF_DDR_PHY_CTRL_1				0x00e4
+#define EMIF_DDR_PHY_CTRL_1_SHDW			0x00e8
+#define EMIF_DDR_PHY_CTRL_2				0x00ec
+#define EMIF_PRIORITY_TO_CLASS_OF_SERVICE_MAPPING	0x0100
+#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_1_MAPPING 0x0104
+#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_2_MAPPING 0x0108
+#define EMIF_READ_WRITE_EXECUTION_THRESHOLD		0x0120
+#define EMIF_COS_CONFIG					0x0124
+#define EMIF_PHY_STATUS_1				0x0140
+#define EMIF_PHY_STATUS_2				0x0144
+#define EMIF_PHY_STATUS_3				0x0148
+#define EMIF_PHY_STATUS_4				0x014c
+#define EMIF_PHY_STATUS_5				0x0150
+#define EMIF_PHY_STATUS_6				0x0154
+#define EMIF_PHY_STATUS_7				0x0158
+#define EMIF_PHY_STATUS_8				0x015c
+#define EMIF_PHY_STATUS_9				0x0160
+#define EMIF_PHY_STATUS_10				0x0164
+#define EMIF_PHY_STATUS_11				0x0168
+#define EMIF_PHY_STATUS_12				0x016c
+#define EMIF_PHY_STATUS_13				0x0170
+#define EMIF_PHY_STATUS_14				0x0174
+#define EMIF_PHY_STATUS_15				0x0178
+#define EMIF_PHY_STATUS_16				0x017c
+#define EMIF_PHY_STATUS_17				0x0180
+#define EMIF_PHY_STATUS_18				0x0184
+#define EMIF_PHY_STATUS_19				0x0188
+#define EMIF_PHY_STATUS_20				0x018c
+#define EMIF_PHY_STATUS_21				0x0190
+#define EMIF_EXT_PHY_CTRL_1				0x0200
+#define EMIF_EXT_PHY_CTRL_1_SHDW			0x0204
+#define EMIF_EXT_PHY_CTRL_2				0x0208
+#define EMIF_EXT_PHY_CTRL_2_SHDW			0x020c
+#define EMIF_EXT_PHY_CTRL_3				0x0210
+#define EMIF_EXT_PHY_CTRL_3_SHDW			0x0214
+#define EMIF_EXT_PHY_CTRL_4				0x0218
+#define EMIF_EXT_PHY_CTRL_4_SHDW			0x021c
+#define EMIF_EXT_PHY_CTRL_5				0x0220
+#define EMIF_EXT_PHY_CTRL_5_SHDW			0x0224
+#define EMIF_EXT_PHY_CTRL_6				0x0228
+#define EMIF_EXT_PHY_CTRL_6_SHDW			0x022c
+#define EMIF_EXT_PHY_CTRL_7				0x0230
+#define EMIF_EXT_PHY_CTRL_7_SHDW			0x0234
+#define EMIF_EXT_PHY_CTRL_8				0x0238
+#define EMIF_EXT_PHY_CTRL_8_SHDW			0x023c
+#define EMIF_EXT_PHY_CTRL_9				0x0240
+#define EMIF_EXT_PHY_CTRL_9_SHDW			0x0244
+#define EMIF_EXT_PHY_CTRL_10				0x0248
+#define EMIF_EXT_PHY_CTRL_10_SHDW			0x024c
+#define EMIF_EXT_PHY_CTRL_11				0x0250
+#define EMIF_EXT_PHY_CTRL_11_SHDW			0x0254
+#define EMIF_EXT_PHY_CTRL_12				0x0258
+#define EMIF_EXT_PHY_CTRL_12_SHDW			0x025c
+#define EMIF_EXT_PHY_CTRL_13				0x0260
+#define EMIF_EXT_PHY_CTRL_13_SHDW			0x0264
+#define EMIF_EXT_PHY_CTRL_14				0x0268
+#define EMIF_EXT_PHY_CTRL_14_SHDW			0x026c
+#define EMIF_EXT_PHY_CTRL_15				0x0270
+#define EMIF_EXT_PHY_CTRL_15_SHDW			0x0274
+#define EMIF_EXT_PHY_CTRL_16				0x0278
+#define EMIF_EXT_PHY_CTRL_16_SHDW			0x027c
+#define EMIF_EXT_PHY_CTRL_17				0x0280
+#define EMIF_EXT_PHY_CTRL_17_SHDW			0x0284
+#define EMIF_EXT_PHY_CTRL_18				0x0288
+#define EMIF_EXT_PHY_CTRL_18_SHDW			0x028c
+#define EMIF_EXT_PHY_CTRL_19				0x0290
+#define EMIF_EXT_PHY_CTRL_19_SHDW			0x0294
+#define EMIF_EXT_PHY_CTRL_20				0x0298
+#define EMIF_EXT_PHY_CTRL_20_SHDW			0x029c
+#define EMIF_EXT_PHY_CTRL_21				0x02a0
+#define EMIF_EXT_PHY_CTRL_21_SHDW			0x02a4
+#define EMIF_EXT_PHY_CTRL_22				0x02a8
+#define EMIF_EXT_PHY_CTRL_22_SHDW			0x02ac
+#define EMIF_EXT_PHY_CTRL_23				0x02b0
+#define EMIF_EXT_PHY_CTRL_23_SHDW			0x02b4
+#define EMIF_EXT_PHY_CTRL_24				0x02b8
+#define EMIF_EXT_PHY_CTRL_24_SHDW			0x02bc
+#define EMIF_EXT_PHY_CTRL_25				0x02c0
+#define EMIF_EXT_PHY_CTRL_25_SHDW			0x02c4
+#define EMIF_EXT_PHY_CTRL_26				0x02c8
+#define EMIF_EXT_PHY_CTRL_26_SHDW			0x02cc
+#define EMIF_EXT_PHY_CTRL_27				0x02d0
+#define EMIF_EXT_PHY_CTRL_27_SHDW			0x02d4
+#define EMIF_EXT_PHY_CTRL_28				0x02d8
+#define EMIF_EXT_PHY_CTRL_28_SHDW			0x02dc
+#define EMIF_EXT_PHY_CTRL_29				0x02e0
+#define EMIF_EXT_PHY_CTRL_29_SHDW			0x02e4
+#define EMIF_EXT_PHY_CTRL_30				0x02e8
+#define EMIF_EXT_PHY_CTRL_30_SHDW			0x02ec
+
+/* Registers shifts and masks */
+
+/* EMIF_MODULE_ID_AND_REVISION */
+#define SCHEME_SHIFT					30
+#define SCHEME_MASK					(0x3 << 30)
+#define MODULE_ID_SHIFT					16
+#define MODULE_ID_MASK					(0xfff << 16)
+#define RTL_VERSION_SHIFT				11
+#define RTL_VERSION_MASK				(0x1f << 11)
+#define MAJOR_REVISION_SHIFT				8
+#define MAJOR_REVISION_MASK				(0x7 << 8)
+#define MINOR_REVISION_SHIFT				0
+#define MINOR_REVISION_MASK				(0x3f << 0)
+
+/* STATUS */
+#define BE_SHIFT					31
+#define BE_MASK						(1 << 31)
+#define DUAL_CLK_MODE_SHIFT				30
+#define DUAL_CLK_MODE_MASK				(1 << 30)
+#define FAST_INIT_SHIFT					29
+#define FAST_INIT_MASK					(1 << 29)
+#define RDLVLGATETO_SHIFT				6
+#define RDLVLGATETO_MASK				(1 << 6)
+#define RDLVLTO_SHIFT					5
+#define RDLVLTO_MASK					(1 << 5)
+#define WRLVLTO_SHIFT					4
+#define WRLVLTO_MASK					(1 << 4)
+#define PHY_DLL_READY_SHIFT				2
+#define PHY_DLL_READY_MASK				(1 << 2)
+
+/* SDRAM_CONFIG */
+#define SDRAM_TYPE_SHIFT				29
+#define SDRAM_TYPE_MASK					(0x7 << 29)
+#define IBANK_POS_SHIFT					27
+#define IBANK_POS_MASK					(0x3 << 27)
+#define DDR_TERM_SHIFT					24
+#define DDR_TERM_MASK					(0x7 << 24)
+#define DDR2_DDQS_SHIFT					23
+#define DDR2_DDQS_MASK					(1 << 23)
+#define DYN_ODT_SHIFT					21
+#define DYN_ODT_MASK					(0x3 << 21)
+#define DDR_DISABLE_DLL_SHIFT				20
+#define DDR_DISABLE_DLL_MASK				(1 << 20)
+#define SDRAM_DRIVE_SHIFT				18
+#define SDRAM_DRIVE_MASK				(0x3 << 18)
+#define CWL_SHIFT					16
+#define CWL_MASK					(0x3 << 16)
+#define NARROW_MODE_SHIFT				14
+#define NARROW_MODE_MASK				(0x3 << 14)
+#define CL_SHIFT					10
+#define CL_MASK						(0xf << 10)
+#define ROWSIZE_SHIFT					7
+#define ROWSIZE_MASK					(0x7 << 7)
+#define IBANK_SHIFT					4
+#define IBANK_MASK					(0x7 << 4)
+#define EBANK_SHIFT					3
+#define EBANK_MASK					(1 << 3)
+#define PAGESIZE_SHIFT					0
+#define PAGESIZE_MASK					(0x7 << 0)
+
+/* SDRAM_CONFIG_2 */
+#define CS1NVMEN_SHIFT					30
+#define CS1NVMEN_MASK					(1 << 30)
+#define EBANK_POS_SHIFT					27
+#define EBANK_POS_MASK					(1 << 27)
+#define RDBNUM_SHIFT					4
+#define RDBNUM_MASK					(0x3 << 4)
+#define RDBSIZE_SHIFT					0
+#define RDBSIZE_MASK					(0x7 << 0)
+
+/* SDRAM_REFRESH_CONTROL */
+#define INITREF_DIS_SHIFT				31
+#define INITREF_DIS_MASK				(1 << 31)
+#define SRT_SHIFT					29
+#define SRT_MASK					(1 << 29)
+#define ASR_SHIFT					28
+#define ASR_MASK					(1 << 28)
+#define PASR_SHIFT					24
+#define PASR_MASK					(0x7 << 24)
+#define REFRESH_RATE_SHIFT				0
+#define REFRESH_RATE_MASK				(0xffff << 0)
+
+/* SDRAM_TIMING_1 */
+#define T_RTW_SHIFT					29
+#define T_RTW_MASK					(0x7 << 29)
+#define T_RP_SHIFT					25
+#define T_RP_MASK					(0xf << 25)
+#define T_RCD_SHIFT					21
+#define T_RCD_MASK					(0xf << 21)
+#define T_WR_SHIFT					17
+#define T_WR_MASK					(0xf << 17)
+#define T_RAS_SHIFT					12
+#define T_RAS_MASK					(0x1f << 12)
+#define T_RC_SHIFT					6
+#define T_RC_MASK					(0x3f << 6)
+#define T_RRD_SHIFT					3
+#define T_RRD_MASK					(0x7 << 3)
+#define T_WTR_SHIFT					0
+#define T_WTR_MASK					(0x7 << 0)
+
+/* SDRAM_TIMING_2 */
+#define T_XP_SHIFT					28
+#define T_XP_MASK					(0x7 << 28)
+#define T_ODT_SHIFT					25
+#define T_ODT_MASK					(0x7 << 25)
+#define T_XSNR_SHIFT					16
+#define T_XSNR_MASK					(0x1ff << 16)
+#define T_XSRD_SHIFT					6
+#define T_XSRD_MASK					(0x3ff << 6)
+#define T_RTP_SHIFT					3
+#define T_RTP_MASK					(0x7 << 3)
+#define T_CKE_SHIFT					0
+#define T_CKE_MASK					(0x7 << 0)
+
+/* SDRAM_TIMING_3 */
+#define T_PDLL_UL_SHIFT					28
+#define T_PDLL_UL_MASK					(0xf << 28)
+#define T_CSTA_SHIFT					24
+#define T_CSTA_MASK					(0xf << 24)
+#define T_CKESR_SHIFT					21
+#define T_CKESR_MASK					(0x7 << 21)
+#define ZQ_ZQCS_SHIFT					15
+#define ZQ_ZQCS_MASK					(0x3f << 15)
+#define T_TDQSCKMAX_SHIFT				13
+#define T_TDQSCKMAX_MASK				(0x3 << 13)
+#define T_RFC_SHIFT					4
+#define T_RFC_MASK					(0x1ff << 4)
+#define T_RAS_MAX_SHIFT					0
+#define T_RAS_MAX_MASK					(0xf << 0)
+
+/* POWER_MANAGEMENT_CONTROL */
+#define PD_TIM_SHIFT					12
+#define PD_TIM_MASK					(0xf << 12)
+#define DPD_EN_SHIFT					11
+#define DPD_EN_MASK					(1 << 11)
+#define LP_MODE_SHIFT					8
+#define LP_MODE_MASK					(0x7 << 8)
+#define SR_TIM_SHIFT					4
+#define SR_TIM_MASK					(0xf << 4)
+#define CS_TIM_SHIFT					0
+#define CS_TIM_MASK					(0xf << 0)
+
+/* LPDDR2_MODE_REG_DATA */
+#define VALUE_0_SHIFT					0
+#define VALUE_0_MASK					(0x7f << 0)
+
+/* LPDDR2_MODE_REG_CONFIG */
+#define CS_SHIFT					31
+#define CS_MASK						(1 << 31)
+#define REFRESH_EN_SHIFT				30
+#define REFRESH_EN_MASK					(1 << 30)
+#define ADDRESS_SHIFT					0
+#define ADDRESS_MASK					(0xff << 0)
+
+/* OCP_CONFIG */
+#define SYS_THRESH_MAX_SHIFT				24
+#define SYS_THRESH_MAX_MASK				(0xf << 24)
+#define MPU_THRESH_MAX_SHIFT				20
+#define MPU_THRESH_MAX_MASK				(0xf << 20)
+#define LL_THRESH_MAX_SHIFT				16
+#define LL_THRESH_MAX_MASK				(0xf << 16)
+
+/* PERFORMANCE_COUNTER_1 */
+#define COUNTER1_SHIFT					0
+#define COUNTER1_MASK					(0xffffffff << 0)
+
+/* PERFORMANCE_COUNTER_2 */
+#define COUNTER2_SHIFT					0
+#define COUNTER2_MASK					(0xffffffff << 0)
+
+/* PERFORMANCE_COUNTER_CONFIG */
+#define CNTR2_MCONNID_EN_SHIFT				31
+#define CNTR2_MCONNID_EN_MASK				(1 << 31)
+#define CNTR2_REGION_EN_SHIFT				30
+#define CNTR2_REGION_EN_MASK				(1 << 30)
+#define CNTR2_CFG_SHIFT					16
+#define CNTR2_CFG_MASK					(0xf << 16)
+#define CNTR1_MCONNID_EN_SHIFT				15
+#define CNTR1_MCONNID_EN_MASK				(1 << 15)
+#define CNTR1_REGION_EN_SHIFT				14
+#define CNTR1_REGION_EN_MASK				(1 << 14)
+#define CNTR1_CFG_SHIFT					0
+#define CNTR1_CFG_MASK					(0xf << 0)
+
+/* PERFORMANCE_COUNTER_MASTER_REGION_SELECT */
+#define MCONNID2_SHIFT					24
+#define MCONNID2_MASK					(0xff << 24)
+#define REGION_SEL2_SHIFT				16
+#define REGION_SEL2_MASK				(0x3 << 16)
+#define MCONNID1_SHIFT					8
+#define MCONNID1_MASK					(0xff << 8)
+#define REGION_SEL1_SHIFT				0
+#define REGION_SEL1_MASK				(0x3 << 0)
+
+/* PERFORMANCE_COUNTER_TIME */
+#define TOTAL_TIME_SHIFT				0
+#define TOTAL_TIME_MASK					(0xffffffff << 0)
+
+/* DLL_CALIB_CTRL */
+#define ACK_WAIT_SHIFT					16
+#define ACK_WAIT_MASK					(0xf << 16)
+#define DLL_CALIB_INTERVAL_SHIFT			0
+#define DLL_CALIB_INTERVAL_MASK				(0x1ff << 0)
+
+/* END_OF_INTERRUPT */
+#define EOI_SHIFT					0
+#define EOI_MASK					(1 << 0)
+
+/* SYSTEM_OCP_INTERRUPT_RAW_STATUS */
+#define DNV_SYS_SHIFT					2
+#define DNV_SYS_MASK					(1 << 2)
+#define TA_SYS_SHIFT					1
+#define TA_SYS_MASK					(1 << 1)
+#define ERR_SYS_SHIFT					0
+#define ERR_SYS_MASK					(1 << 0)
+
+/* LOW_LATENCY_OCP_INTERRUPT_RAW_STATUS */
+#define DNV_LL_SHIFT					2
+#define DNV_LL_MASK					(1 << 2)
+#define TA_LL_SHIFT					1
+#define TA_LL_MASK					(1 << 1)
+#define ERR_LL_SHIFT					0
+#define ERR_LL_MASK					(1 << 0)
+
+/* SYSTEM_OCP_INTERRUPT_ENABLE_SET */
+#define EN_DNV_SYS_SHIFT				2
+#define EN_DNV_SYS_MASK					(1 << 2)
+#define EN_TA_SYS_SHIFT					1
+#define EN_TA_SYS_MASK					(1 << 1)
+#define EN_ERR_SYS_SHIFT					0
+#define EN_ERR_SYS_MASK					(1 << 0)
+
+/* LOW_LATENCY_OCP_INTERRUPT_ENABLE_SET */
+#define EN_DNV_LL_SHIFT					2
+#define EN_DNV_LL_MASK					(1 << 2)
+#define EN_TA_LL_SHIFT					1
+#define EN_TA_LL_MASK					(1 << 1)
+#define EN_ERR_LL_SHIFT					0
+#define EN_ERR_LL_MASK					(1 << 0)
+
+/* SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG */
+#define ZQ_CS1EN_SHIFT					31
+#define ZQ_CS1EN_MASK					(1 << 31)
+#define ZQ_CS0EN_SHIFT					30
+#define ZQ_CS0EN_MASK					(1 << 30)
+#define ZQ_DUALCALEN_SHIFT				29
+#define ZQ_DUALCALEN_MASK				(1 << 29)
+#define ZQ_SFEXITEN_SHIFT				28
+#define ZQ_SFEXITEN_MASK				(1 << 28)
+#define ZQ_ZQINIT_MULT_SHIFT				18
+#define ZQ_ZQINIT_MULT_MASK				(0x3 << 18)
+#define ZQ_ZQCL_MULT_SHIFT				16
+#define ZQ_ZQCL_MULT_MASK				(0x3 << 16)
+#define ZQ_REFINTERVAL_SHIFT				0
+#define ZQ_REFINTERVAL_MASK				(0xffff << 0)
+
+/* TEMPERATURE_ALERT_CONFIG */
+#define TA_CS1EN_SHIFT					31
+#define TA_CS1EN_MASK					(1 << 31)
+#define TA_CS0EN_SHIFT					30
+#define TA_CS0EN_MASK					(1 << 30)
+#define TA_SFEXITEN_SHIFT				28
+#define TA_SFEXITEN_MASK				(1 << 28)
+#define TA_DEVWDT_SHIFT					26
+#define TA_DEVWDT_MASK					(0x3 << 26)
+#define TA_DEVCNT_SHIFT					24
+#define TA_DEVCNT_MASK					(0x3 << 24)
+#define TA_REFINTERVAL_SHIFT				0
+#define TA_REFINTERVAL_MASK				(0x3fffff << 0)
+
+/* OCP_ERROR_LOG */
+#define MADDRSPACE_SHIFT				14
+#define MADDRSPACE_MASK					(0x3 << 14)
+#define MBURSTSEQ_SHIFT					11
+#define MBURSTSEQ_MASK					(0x7 << 11)
+#define MCMD_SHIFT					8
+#define MCMD_MASK					(0x7 << 8)
+#define MCONNID_SHIFT					0
+#define MCONNID_MASK					(0xff << 0)
+
+/* READ_WRITE_LEVELING_CONTROL */
+#define RDWRLVLFULL_START				0x80000000
+
+/* DDR_PHY_CTRL_1 - EMIF4D */
+#define DLL_SLAVE_DLY_CTRL_SHIFT_4D			4
+#define DLL_SLAVE_DLY_CTRL_MASK_4D			(0xFF << 4)
+#define READ_LATENCY_SHIFT_4D				0
+#define READ_LATENCY_MASK_4D				(0xf << 0)
+
+/* DDR_PHY_CTRL_1 - EMIF4D5 */
+#define DLL_HALF_DELAY_SHIFT_4D5			21
+#define DLL_HALF_DELAY_MASK_4D5				(1 << 21)
+#define READ_LATENCY_SHIFT_4D5				0
+#define READ_LATENCY_MASK_4D5				(0x1f << 0)
+
+/* DDR_PHY_CTRL_1_SHDW */
+#define DDR_PHY_CTRL_1_SHDW_SHIFT			5
+#define DDR_PHY_CTRL_1_SHDW_MASK			(0x7ffffff << 5)
+#define READ_LATENCY_SHDW_SHIFT				0
+#define READ_LATENCY_SHDW_MASK				(0x1f << 0)
+
+#define EMIF_SRAM_AM33_REG_LAYOUT			0x00000000
+#define EMIF_SRAM_AM43_REG_LAYOUT			0x00000001
+
+#ifndef __ASSEMBLY__
+/*
+ * Structure containing shadow of important registers in EMIF
+ * The calculation function fills in this structure to be later used for
+ * initialisation and DVFS
+ */
+struct emif_regs {
+	u32 freq;
+	u32 ref_ctrl_shdw;
+	u32 ref_ctrl_shdw_derated;
+	u32 sdram_tim1_shdw;
+	u32 sdram_tim1_shdw_derated;
+	u32 sdram_tim2_shdw;
+	u32 sdram_tim3_shdw;
+	u32 sdram_tim3_shdw_derated;
+	u32 pwr_mgmt_ctrl_shdw;
+	union {
+		u32 read_idle_ctrl_shdw_normal;
+		u32 dll_calib_ctrl_shdw_normal;
+	};
+	union {
+		u32 read_idle_ctrl_shdw_volt_ramp;
+		u32 dll_calib_ctrl_shdw_volt_ramp;
+	};
+
+	u32 phy_ctrl_1_shdw;
+	u32 ext_phy_ctrl_2_shdw;
+	u32 ext_phy_ctrl_3_shdw;
+	u32 ext_phy_ctrl_4_shdw;
+};
+
+struct ti_emif_pm_functions;
+
+extern unsigned int ti_emif_sram;
+extern unsigned int ti_emif_sram_sz;
+extern struct ti_emif_pm_data ti_emif_pm_sram_data;
+extern struct emif_regs_amx3 ti_emif_regs_amx3;
+
+void ti_emif_save_context(void);
+void ti_emif_restore_context(void);
+void ti_emif_run_hw_leveling(void);
+void ti_emif_enter_sr(void);
+void ti_emif_exit_sr(void);
+void ti_emif_abort_sr(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __EMIF_H */

linux-7.2.3/drivers/memory/fsl-corenet-cf.c

@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * CoreNet Coherency Fabric error reporting
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+enum ccf_version {
+	CCF1,
+	CCF2,
+};
+
+struct ccf_info {
+	enum ccf_version version;
+	int err_reg_offs;
+	bool has_brr;
+};
+
+static const struct ccf_info ccf1_info = {
+	.version = CCF1,
+	.err_reg_offs = 0xa00,
+	.has_brr = false,
+};
+
+static const struct ccf_info ccf2_info = {
+	.version = CCF2,
+	.err_reg_offs = 0xe40,
+	.has_brr = true,
+};
+
+/*
+ * This register is present but not documented, with different values for
+ * IP_ID, on other chips with fsl,corenet2-cf such as t4240 and b4860.
+ */
+#define CCF_BRR			0xbf8
+#define CCF_BRR_IPID		0xffff0000
+#define CCF_BRR_IPID_T1040	0x09310000
+
+static const struct of_device_id ccf_matches[] = {
+	{
+		.compatible = "fsl,corenet1-cf",
+		.data = &ccf1_info,
+	},
+	{
+		.compatible = "fsl,corenet2-cf",
+		.data = &ccf2_info,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, ccf_matches);
+
+struct ccf_err_regs {
+	u32 errdet;		/* 0x00 Error Detect Register */
+	/* 0x04 Error Enable (ccf1)/Disable (ccf2) Register */
+	u32 errdis;
+	/* 0x08 Error Interrupt Enable Register (ccf2 only) */
+	u32 errinten;
+	u32 cecar;		/* 0x0c Error Capture Attribute Register */
+	u32 cecaddrh;		/* 0x10 Error Capture Address High */
+	u32 cecaddrl;		/* 0x14 Error Capture Address Low */
+	u32 cecar2;		/* 0x18 Error Capture Attribute Register 2 */
+};
+
+/* LAE/CV also valid for errdis and errinten */
+#define ERRDET_LAE		(1 << 0)  /* Local Access Error */
+#define ERRDET_CV		(1 << 1)  /* Coherency Violation */
+#define ERRDET_UTID		(1 << 2)  /* Unavailable Target ID (t1040) */
+#define ERRDET_MCST		(1 << 3)  /* Multicast Stash (t1040) */
+#define ERRDET_CTYPE_SHIFT	26	  /* Capture Type (ccf2 only) */
+#define ERRDET_CTYPE_MASK	(0x1f << ERRDET_CTYPE_SHIFT)
+#define ERRDET_CAP		(1 << 31) /* Capture Valid (ccf2 only) */
+
+#define CECAR_VAL		(1 << 0)  /* Valid (ccf1 only) */
+#define CECAR_UVT		(1 << 15) /* Unavailable target ID (ccf1) */
+#define CECAR_SRCID_SHIFT_CCF1	24
+#define CECAR_SRCID_MASK_CCF1	(0xff << CECAR_SRCID_SHIFT_CCF1)
+#define CECAR_SRCID_SHIFT_CCF2	18
+#define CECAR_SRCID_MASK_CCF2	(0xff << CECAR_SRCID_SHIFT_CCF2)
+
+#define CECADDRH_ADDRH		0xff
+
+struct ccf_private {
+	const struct ccf_info *info;
+	struct device *dev;
+	void __iomem *regs;
+	struct ccf_err_regs __iomem *err_regs;
+	bool t1040;
+};
+
+static irqreturn_t ccf_irq(int irq, void *dev_id)
+{
+	struct ccf_private *ccf = dev_id;
+	static DEFINE_RATELIMIT_STATE(ratelimit, DEFAULT_RATELIMIT_INTERVAL,
+				      DEFAULT_RATELIMIT_BURST);
+	u32 errdet, cecar, cecar2;
+	u64 addr;
+	u32 src_id;
+	bool uvt = false;
+	bool cap_valid = false;
+
+	errdet = ioread32be(&ccf->err_regs->errdet);
+	cecar = ioread32be(&ccf->err_regs->cecar);
+	cecar2 = ioread32be(&ccf->err_regs->cecar2);
+	addr = ioread32be(&ccf->err_regs->cecaddrl);
+	addr |= ((u64)(ioread32be(&ccf->err_regs->cecaddrh) &
+		       CECADDRH_ADDRH)) << 32;
+
+	if (!__ratelimit(&ratelimit))
+		goto out;
+
+	switch (ccf->info->version) {
+	case CCF1:
+		if (cecar & CECAR_VAL) {
+			if (cecar & CECAR_UVT)
+				uvt = true;
+
+			src_id = (cecar & CECAR_SRCID_MASK_CCF1) >>
+				 CECAR_SRCID_SHIFT_CCF1;
+			cap_valid = true;
+		}
+
+		break;
+	case CCF2:
+		if (errdet & ERRDET_CAP) {
+			src_id = (cecar & CECAR_SRCID_MASK_CCF2) >>
+				 CECAR_SRCID_SHIFT_CCF2;
+			cap_valid = true;
+		}
+
+		break;
+	}
+
+	dev_crit(ccf->dev, "errdet 0x%08x cecar 0x%08x cecar2 0x%08x\n",
+		 errdet, cecar, cecar2);
+
+	if (errdet & ERRDET_LAE) {
+		if (uvt)
+			dev_crit(ccf->dev, "LAW Unavailable Target ID\n");
+		else
+			dev_crit(ccf->dev, "Local Access Window Error\n");
+	}
+
+	if (errdet & ERRDET_CV)
+		dev_crit(ccf->dev, "Coherency Violation\n");
+
+	if (errdet & ERRDET_UTID)
+		dev_crit(ccf->dev, "Unavailable Target ID\n");
+
+	if (errdet & ERRDET_MCST)
+		dev_crit(ccf->dev, "Multicast Stash\n");
+
+	if (cap_valid) {
+		dev_crit(ccf->dev, "address 0x%09llx, src id 0x%x\n",
+			 addr, src_id);
+	}
+
+out:
+	iowrite32be(errdet, &ccf->err_regs->errdet);
+	return errdet ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int ccf_probe(struct platform_device *pdev)
+{
+	struct ccf_private *ccf;
+	u32 errinten;
+	int ret, irq;
+
+	ccf = devm_kzalloc(&pdev->dev, sizeof(*ccf), GFP_KERNEL);
+	if (!ccf)
+		return -ENOMEM;
+
+	ccf->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ccf->regs))
+		return PTR_ERR(ccf->regs);
+
+	ccf->dev = &pdev->dev;
+	ccf->info = device_get_match_data(&pdev->dev);
+	ccf->err_regs = ccf->regs + ccf->info->err_reg_offs;
+
+	if (ccf->info->has_brr) {
+		u32 brr = ioread32be(ccf->regs + CCF_BRR);
+
+		if ((brr & CCF_BRR_IPID) == CCF_BRR_IPID_T1040)
+			ccf->t1040 = true;
+	}
+
+	dev_set_drvdata(&pdev->dev, ccf);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(&pdev->dev, irq, ccf_irq, 0, pdev->name, ccf);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: can't request irq\n", __func__);
+		return ret;
+	}
+
+	errinten = ERRDET_LAE | ERRDET_CV;
+	if (ccf->t1040)
+		errinten |= ERRDET_UTID | ERRDET_MCST;
+
+	switch (ccf->info->version) {
+	case CCF1:
+		/* On CCF1 this register enables rather than disables. */
+		iowrite32be(errinten, &ccf->err_regs->errdis);
+		break;
+
+	case CCF2:
+		iowrite32be(0, &ccf->err_regs->errdis);
+		iowrite32be(errinten, &ccf->err_regs->errinten);
+		break;
+	}
+
+	return 0;
+}
+
+static void ccf_remove(struct platform_device *pdev)
+{
+	struct ccf_private *ccf = dev_get_drvdata(&pdev->dev);
+
+	switch (ccf->info->version) {
+	case CCF1:
+		iowrite32be(0, &ccf->err_regs->errdis);
+		break;
+
+	case CCF2:
+		/*
+		 * We clear errdis on ccf1 because that's the only way to
+		 * disable interrupts, but on ccf2 there's no need to disable
+		 * detection.
+		 */
+		iowrite32be(0, &ccf->err_regs->errinten);
+		break;
+	}
+}
+
+static struct platform_driver ccf_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = ccf_matches,
+	},
+	.probe = ccf_probe,
+	.remove = ccf_remove,
+};
+
+module_platform_driver(ccf_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Freescale Semiconductor");
+MODULE_DESCRIPTION("Freescale CoreNet Coherency Fabric error reporting");

linux-7.2.3/drivers/memory/fsl_ifc.c

@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc
+ *
+ * Freescale Integrated Flash Controller
+ *
+ * Author: Dipen Dudhat <Dipen.Dudhat@freescale.com>
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_ifc.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev;
+EXPORT_SYMBOL(fsl_ifc_ctrl_dev);
+
+/*
+ * convert_ifc_address - convert the base address
+ * @addr_base:	base address of the memory bank
+ */
+unsigned int convert_ifc_address(phys_addr_t addr_base)
+{
+	return addr_base & CSPR_BA;
+}
+EXPORT_SYMBOL(convert_ifc_address);
+
+/*
+ * fsl_ifc_find - find IFC bank
+ * @addr_base:	base address of the memory bank
+ *
+ * This function walks IFC banks comparing "Base address" field of the CSPR
+ * registers with the supplied addr_base argument. When bases match this
+ * function returns bank number (starting with 0), otherwise it returns
+ * appropriate errno value.
+ */
+int fsl_ifc_find(phys_addr_t addr_base)
+{
+	int i = 0;
+
+	if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->gregs)
+		return -ENODEV;
+
+	for (i = 0; i < fsl_ifc_ctrl_dev->banks; i++) {
+		u32 cspr = ifc_in32(&fsl_ifc_ctrl_dev->gregs->cspr_cs[i].cspr);
+
+		if (cspr & CSPR_V && (cspr & CSPR_BA) ==
+				convert_ifc_address(addr_base))
+			return i;
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL(fsl_ifc_find);
+
+static int fsl_ifc_ctrl_init(struct fsl_ifc_ctrl *ctrl)
+{
+	struct fsl_ifc_global __iomem *ifc = ctrl->gregs;
+
+	/*
+	 * Clear all the common status and event registers
+	 */
+	if (ifc_in32(&ifc->cm_evter_stat) & IFC_CM_EVTER_STAT_CSER)
+		ifc_out32(IFC_CM_EVTER_STAT_CSER, &ifc->cm_evter_stat);
+
+	/* enable all error and events */
+	ifc_out32(IFC_CM_EVTER_EN_CSEREN, &ifc->cm_evter_en);
+
+	/* enable all error and event interrupts */
+	ifc_out32(IFC_CM_EVTER_INTR_EN_CSERIREN, &ifc->cm_evter_intr_en);
+	ifc_out32(0x0, &ifc->cm_erattr0);
+	ifc_out32(0x0, &ifc->cm_erattr1);
+
+	return 0;
+}
+
+static void fsl_ifc_ctrl_remove(struct platform_device *dev)
+{
+	struct fsl_ifc_ctrl *ctrl = dev_get_drvdata(&dev->dev);
+
+	of_platform_depopulate(&dev->dev);
+	free_irq(ctrl->nand_irq, ctrl);
+	free_irq(ctrl->irq, ctrl);
+
+	irq_dispose_mapping(ctrl->nand_irq);
+	irq_dispose_mapping(ctrl->irq);
+
+	iounmap(ctrl->gregs);
+
+	dev_set_drvdata(&dev->dev, NULL);
+}
+
+/*
+ * NAND events are split between an operational interrupt which only
+ * receives OPC, and an error interrupt that receives everything else,
+ * including non-NAND errors.  Whichever interrupt gets to it first
+ * records the status and wakes the wait queue.
+ */
+static DEFINE_SPINLOCK(nand_irq_lock);
+
+static u32 check_nand_stat(struct fsl_ifc_ctrl *ctrl)
+{
+	struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
+	unsigned long flags;
+	u32 stat;
+
+	spin_lock_irqsave(&nand_irq_lock, flags);
+
+	stat = ifc_in32(&ifc->ifc_nand.nand_evter_stat);
+	if (stat) {
+		ifc_out32(stat, &ifc->ifc_nand.nand_evter_stat);
+		ctrl->nand_stat = stat;
+		wake_up(&ctrl->nand_wait);
+	}
+
+	spin_unlock_irqrestore(&nand_irq_lock, flags);
+
+	return stat;
+}
+
+static irqreturn_t fsl_ifc_nand_irq(int irqno, void *data)
+{
+	struct fsl_ifc_ctrl *ctrl = data;
+
+	if (check_nand_stat(ctrl))
+		return IRQ_HANDLED;
+
+	return IRQ_NONE;
+}
+
+/*
+ * NOTE: This interrupt is used to report ifc events of various kinds,
+ * such as transaction errors on the chipselects.
+ */
+static irqreturn_t fsl_ifc_ctrl_irq(int irqno, void *data)
+{
+	struct fsl_ifc_ctrl *ctrl = data;
+	struct fsl_ifc_global __iomem *ifc = ctrl->gregs;
+	u32 err_axiid, err_srcid, status, cs_err, err_addr;
+	irqreturn_t ret = IRQ_NONE;
+
+	/* read for chip select error */
+	cs_err = ifc_in32(&ifc->cm_evter_stat);
+	if (cs_err) {
+		dev_err(ctrl->dev, "transaction sent to IFC is not mapped to any memory bank 0x%08X\n",
+			cs_err);
+		/* clear the chip select error */
+		ifc_out32(IFC_CM_EVTER_STAT_CSER, &ifc->cm_evter_stat);
+
+		/* read error attribute registers print the error information */
+		status = ifc_in32(&ifc->cm_erattr0);
+		err_addr = ifc_in32(&ifc->cm_erattr1);
+
+		if (status & IFC_CM_ERATTR0_ERTYP_READ)
+			dev_err(ctrl->dev, "Read transaction error CM_ERATTR0 0x%08X\n",
+				status);
+		else
+			dev_err(ctrl->dev, "Write transaction error CM_ERATTR0 0x%08X\n",
+				status);
+
+		err_axiid = (status & IFC_CM_ERATTR0_ERAID) >>
+					IFC_CM_ERATTR0_ERAID_SHIFT;
+		dev_err(ctrl->dev, "AXI ID of the error transaction 0x%08X\n",
+			err_axiid);
+
+		err_srcid = (status & IFC_CM_ERATTR0_ESRCID) >>
+					IFC_CM_ERATTR0_ESRCID_SHIFT;
+		dev_err(ctrl->dev, "SRC ID of the error transaction 0x%08X\n",
+			err_srcid);
+
+		dev_err(ctrl->dev, "Transaction Address corresponding to error ERADDR 0x%08X\n",
+			err_addr);
+
+		ret = IRQ_HANDLED;
+	}
+
+	if (check_nand_stat(ctrl))
+		ret = IRQ_HANDLED;
+
+	return ret;
+}
+
+/*
+ * fsl_ifc_ctrl_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code allocates all of
+ * the resources needed for the controller only.  The
+ * resources for the NAND banks themselves are allocated
+ * in the chip probe function.
+ */
+static int fsl_ifc_ctrl_probe(struct platform_device *dev)
+{
+	int ret = 0;
+	int version, banks;
+	void __iomem *addr;
+
+	dev_info(&dev->dev, "Freescale Integrated Flash Controller\n");
+
+	fsl_ifc_ctrl_dev = devm_kzalloc(&dev->dev, sizeof(*fsl_ifc_ctrl_dev),
+					GFP_KERNEL);
+	if (!fsl_ifc_ctrl_dev)
+		return -ENOMEM;
+
+	dev_set_drvdata(&dev->dev, fsl_ifc_ctrl_dev);
+
+	/* IOMAP the entire IFC region */
+	fsl_ifc_ctrl_dev->gregs = of_iomap(dev->dev.of_node, 0);
+	if (!fsl_ifc_ctrl_dev->gregs) {
+		dev_err(&dev->dev, "failed to get memory region\n");
+		return -ENODEV;
+	}
+
+	if (of_property_read_bool(dev->dev.of_node, "little-endian")) {
+		fsl_ifc_ctrl_dev->little_endian = true;
+		dev_dbg(&dev->dev, "IFC REGISTERS are LITTLE endian\n");
+	} else {
+		fsl_ifc_ctrl_dev->little_endian = false;
+		dev_dbg(&dev->dev, "IFC REGISTERS are BIG endian\n");
+	}
+
+	version = ifc_in32(&fsl_ifc_ctrl_dev->gregs->ifc_rev) &
+			FSL_IFC_VERSION_MASK;
+
+	banks = (version == FSL_IFC_VERSION_1_0_0) ? 4 : 8;
+	dev_info(&dev->dev, "IFC version %d.%d, %d banks\n",
+		version >> 24, (version >> 16) & 0xf, banks);
+
+	fsl_ifc_ctrl_dev->version = version;
+	fsl_ifc_ctrl_dev->banks = banks;
+
+	addr = fsl_ifc_ctrl_dev->gregs;
+	if (version >= FSL_IFC_VERSION_2_0_0)
+		addr += PGOFFSET_64K;
+	else
+		addr += PGOFFSET_4K;
+	fsl_ifc_ctrl_dev->rregs = addr;
+
+	/* get the Controller level irq */
+	fsl_ifc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
+	if (fsl_ifc_ctrl_dev->irq == 0) {
+		dev_err(&dev->dev, "failed to get irq resource for IFC\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* get the nand machine irq */
+	fsl_ifc_ctrl_dev->nand_irq =
+			irq_of_parse_and_map(dev->dev.of_node, 1);
+
+	fsl_ifc_ctrl_dev->dev = &dev->dev;
+
+	ret = fsl_ifc_ctrl_init(fsl_ifc_ctrl_dev);
+	if (ret < 0)
+		goto err_unmap_nandirq;
+
+	init_waitqueue_head(&fsl_ifc_ctrl_dev->nand_wait);
+
+	ret = request_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_irq, IRQF_SHARED,
+			  "fsl-ifc", fsl_ifc_ctrl_dev);
+	if (ret != 0) {
+		dev_err(&dev->dev, "failed to install irq (%d)\n",
+			fsl_ifc_ctrl_dev->irq);
+		goto err_unmap_nandirq;
+	}
+
+	if (fsl_ifc_ctrl_dev->nand_irq) {
+		ret = request_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_nand_irq,
+				0, "fsl-ifc-nand", fsl_ifc_ctrl_dev);
+		if (ret != 0) {
+			dev_err(&dev->dev, "failed to install irq (%d)\n",
+				fsl_ifc_ctrl_dev->nand_irq);
+			goto err_free_irq;
+		}
+	}
+
+	/* legacy dts may still use "simple-bus" compatible */
+	ret = of_platform_default_populate(dev->dev.of_node, NULL, &dev->dev);
+	if (ret)
+		goto err_free_nandirq;
+
+	return 0;
+
+err_free_nandirq:
+	free_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_ctrl_dev);
+err_free_irq:
+	free_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_dev);
+err_unmap_nandirq:
+	irq_dispose_mapping(fsl_ifc_ctrl_dev->nand_irq);
+	irq_dispose_mapping(fsl_ifc_ctrl_dev->irq);
+err:
+	iounmap(fsl_ifc_ctrl_dev->gregs);
+	return ret;
+}
+
+static const struct of_device_id fsl_ifc_match[] = {
+	{
+		.compatible = "fsl,ifc",
+	},
+	{},
+};
+
+static struct platform_driver fsl_ifc_ctrl_driver = {
+	.driver = {
+		.name	= "fsl-ifc",
+		.of_match_table = fsl_ifc_match,
+	},
+	.probe       = fsl_ifc_ctrl_probe,
+	.remove  = fsl_ifc_ctrl_remove,
+};
+
+static int __init fsl_ifc_init(void)
+{
+	return platform_driver_register(&fsl_ifc_ctrl_driver);
+}
+subsys_initcall(fsl_ifc_init);
+
+MODULE_AUTHOR("Freescale Semiconductor");
+MODULE_DESCRIPTION("Freescale Integrated Flash Controller driver");

linux-7.2.3/drivers/memory/jedec_ddr.h

@@ -0,0 +1,280 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Definitions for DDR memories based on JEDEC specs
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
+ * Aneesh V <aneesh@ti.com>
+ */
+#ifndef __JEDEC_DDR_H
+#define __JEDEC_DDR_H
+
+#include <linux/types.h>
+
+/* DDR Densities */
+#define DDR_DENSITY_64Mb	1
+#define DDR_DENSITY_128Mb	2
+#define DDR_DENSITY_256Mb	3
+#define DDR_DENSITY_512Mb	4
+#define DDR_DENSITY_1Gb		5
+#define DDR_DENSITY_2Gb		6
+#define DDR_DENSITY_4Gb		7
+#define DDR_DENSITY_8Gb		8
+#define DDR_DENSITY_16Gb	9
+#define DDR_DENSITY_32Gb	10
+
+/* DDR type */
+#define DDR_TYPE_DDR2		1
+#define DDR_TYPE_DDR3		2
+#define DDR_TYPE_LPDDR2_S4	3
+#define DDR_TYPE_LPDDR2_S2	4
+#define DDR_TYPE_LPDDR2_NVM	5
+#define DDR_TYPE_LPDDR3		6
+
+/* DDR IO width */
+#define DDR_IO_WIDTH_4		1
+#define DDR_IO_WIDTH_8		2
+#define DDR_IO_WIDTH_16		3
+#define DDR_IO_WIDTH_32		4
+
+/* Number of Row bits */
+#define R9			9
+#define R10			10
+#define R11			11
+#define R12			12
+#define R13			13
+#define R14			14
+#define R15			15
+#define R16			16
+
+/* Number of Column bits */
+#define C7			7
+#define C8			8
+#define C9			9
+#define C10			10
+#define C11			11
+#define C12			12
+
+/* Number of Banks */
+#define B1			0
+#define B2			1
+#define B4			2
+#define B8			3
+
+/* Refresh rate in nano-seconds */
+#define T_REFI_15_6		15600
+#define T_REFI_7_8		7800
+#define T_REFI_3_9		3900
+
+/* tRFC values */
+#define T_RFC_90		90000
+#define T_RFC_110		110000
+#define T_RFC_130		130000
+#define T_RFC_160		160000
+#define T_RFC_210		210000
+#define T_RFC_300		300000
+#define T_RFC_350		350000
+
+/* Mode register numbers */
+#define DDR_MR0			0
+#define DDR_MR1			1
+#define DDR_MR2			2
+#define DDR_MR3			3
+#define DDR_MR4			4
+#define DDR_MR5			5
+#define DDR_MR6			6
+#define DDR_MR7			7
+#define DDR_MR8			8
+#define DDR_MR9			9
+#define DDR_MR10		10
+#define DDR_MR11		11
+#define DDR_MR16		16
+#define DDR_MR17		17
+#define DDR_MR18		18
+
+/*
+ * LPDDR2 related defines
+ */
+
+/* MR4 register fields */
+#define MR4_SDRAM_REF_RATE_SHIFT			0
+#define MR4_SDRAM_REF_RATE_MASK				7
+#define MR4_TUF_SHIFT					7
+#define MR4_TUF_MASK					(1 << 7)
+
+/* MR4 SDRAM Refresh Rate field values */
+#define SDRAM_TEMP_NOMINAL				0x3
+#define SDRAM_TEMP_RESERVED_4				0x4
+#define SDRAM_TEMP_HIGH_DERATE_REFRESH			0x5
+#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS	0x6
+#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN			0x7
+
+#define NUM_DDR_ADDR_TABLE_ENTRIES			11
+#define NUM_DDR_TIMING_TABLE_ENTRIES			4
+
+#define LPDDR2_MANID_SAMSUNG				1
+#define LPDDR2_MANID_QIMONDA				2
+#define LPDDR2_MANID_ELPIDA				3
+#define LPDDR2_MANID_ETRON				4
+#define LPDDR2_MANID_NANYA				5
+#define LPDDR2_MANID_HYNIX				6
+#define LPDDR2_MANID_MOSEL				7
+#define LPDDR2_MANID_WINBOND				8
+#define LPDDR2_MANID_ESMT				9
+#define LPDDR2_MANID_SPANSION				11
+#define LPDDR2_MANID_SST				12
+#define LPDDR2_MANID_ZMOS				13
+#define LPDDR2_MANID_INTEL				14
+#define LPDDR2_MANID_NUMONYX				254
+#define LPDDR2_MANID_MICRON				255
+
+#define LPDDR2_TYPE_S4					0
+#define LPDDR2_TYPE_S2					1
+#define LPDDR2_TYPE_NVM					2
+
+/* Structure for DDR addressing info from the JEDEC spec */
+struct lpddr2_addressing {
+	u32 num_banks;
+	u32 tREFI_ns;
+	u32 tRFCab_ps;
+};
+
+/*
+ * Structure for timings from the LPDDR2 datasheet
+ * All parameters are in pico seconds(ps) unless explicitly indicated
+ * with a suffix like tRAS_max_ns below
+ */
+struct lpddr2_timings {
+	u32 max_freq;
+	u32 min_freq;
+	u32 tRPab;
+	u32 tRCD;
+	u32 tWR;
+	u32 tRAS_min;
+	u32 tRRD;
+	u32 tWTR;
+	u32 tXP;
+	u32 tRTP;
+	u32 tCKESR;
+	u32 tDQSCK_max;
+	u32 tDQSCK_max_derated;
+	u32 tFAW;
+	u32 tZQCS;
+	u32 tZQCL;
+	u32 tZQinit;
+	u32 tRAS_max_ns;
+};
+
+/*
+ * Min value for some parameters in terms of number of tCK cycles(nCK)
+ * Please set to zero parameters that are not valid for a given memory
+ * type
+ */
+struct lpddr2_min_tck {
+	u32 tRPab;
+	u32 tRCD;
+	u32 tWR;
+	u32 tRASmin;
+	u32 tRRD;
+	u32 tWTR;
+	u32 tXP;
+	u32 tRTP;
+	u32 tCKE;
+	u32 tCKESR;
+	u32 tFAW;
+};
+
+extern const struct lpddr2_addressing
+	lpddr2_jedec_addressing_table[NUM_DDR_ADDR_TABLE_ENTRIES];
+extern const struct lpddr2_timings
+	lpddr2_jedec_timings[NUM_DDR_TIMING_TABLE_ENTRIES];
+extern const struct lpddr2_min_tck lpddr2_jedec_min_tck;
+
+/* Structure of MR8 */
+union lpddr2_basic_config4 {
+	u32 value;
+
+	struct {
+		unsigned int arch_type : 2;
+		unsigned int density : 4;
+		unsigned int io_width : 2;
+	} __packed;
+};
+
+/*
+ * Structure for information about LPDDR2 chip. All parameters are
+ * matching raw values of standard mode register bitfields or set to
+ * -ENOENT if info unavailable.
+ */
+struct lpddr2_info {
+	int arch_type;
+	int density;
+	int io_width;
+	int manufacturer_id;
+	int revision_id1;
+	int revision_id2;
+};
+
+const char *lpddr2_jedec_manufacturer(unsigned int manufacturer_id);
+
+/*
+ * Structure for timings for LPDDR3 based on LPDDR2 plus additional fields.
+ * All parameters are in pico seconds(ps) excluding max_freq, min_freq which
+ * are in Hz.
+ */
+struct lpddr3_timings {
+	u32 max_freq;
+	u32 min_freq;
+	u32 tRFC;
+	u32 tRRD;
+	u32 tRPab;
+	u32 tRPpb;
+	u32 tRCD;
+	u32 tRC;
+	u32 tRAS;
+	u32 tWTR;
+	u32 tWR;
+	u32 tRTP;
+	u32 tW2W_C2C;
+	u32 tR2R_C2C;
+	u32 tWL;
+	u32 tDQSCK;
+	u32 tRL;
+	u32 tFAW;
+	u32 tXSR;
+	u32 tXP;
+	u32 tCKE;
+	u32 tCKESR;
+	u32 tMRD;
+};
+
+/*
+ * Min value for some parameters in terms of number of tCK cycles(nCK)
+ * Please set to zero parameters that are not valid for a given memory
+ * type
+ */
+struct lpddr3_min_tck {
+	u32 tRFC;
+	u32 tRRD;
+	u32 tRPab;
+	u32 tRPpb;
+	u32 tRCD;
+	u32 tRC;
+	u32 tRAS;
+	u32 tWTR;
+	u32 tWR;
+	u32 tRTP;
+	u32 tW2W_C2C;
+	u32 tR2R_C2C;
+	u32 tWL;
+	u32 tDQSCK;
+	u32 tRL;
+	u32 tFAW;
+	u32 tXSR;
+	u32 tXP;
+	u32 tCKE;
+	u32 tCKESR;
+	u32 tMRD;
+};
+
+#endif /* __JEDEC_DDR_H */

linux-7.2.3/drivers/memory/jedec_ddr_data.c

@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * DDR addressing details and AC timing parameters from JEDEC specs
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
+ * Aneesh V <aneesh@ti.com>
+ */
+
+#include <linux/export.h>
+
+#include "jedec_ddr.h"
+
+/* LPDDR2 addressing details from JESD209-2 section 2.4 */
+const struct lpddr2_addressing
+	lpddr2_jedec_addressing_table[NUM_DDR_ADDR_TABLE_ENTRIES] = {
+	{B4, T_REFI_15_6, T_RFC_90}, /* 64M */
+	{B4, T_REFI_15_6, T_RFC_90}, /* 128M */
+	{B4, T_REFI_7_8,  T_RFC_90}, /* 256M */
+	{B4, T_REFI_7_8,  T_RFC_90}, /* 512M */
+	{B8, T_REFI_7_8, T_RFC_130}, /* 1GS4 */
+	{B8, T_REFI_3_9, T_RFC_130}, /* 2GS4 */
+	{B8, T_REFI_3_9, T_RFC_130}, /* 4G */
+	{B8, T_REFI_3_9, T_RFC_210}, /* 8G */
+	{B4, T_REFI_7_8, T_RFC_130}, /* 1GS2 */
+	{B4, T_REFI_3_9, T_RFC_130}, /* 2GS2 */
+};
+EXPORT_SYMBOL_GPL(lpddr2_jedec_addressing_table);
+
+/* LPDDR2 AC timing parameters from JESD209-2 section 12 */
+const struct lpddr2_timings
+	lpddr2_jedec_timings[NUM_DDR_TIMING_TABLE_ENTRIES] = {
+	/* Speed bin 400(200 MHz) */
+	[0] = {
+		.max_freq	= 200000000,
+		.min_freq	= 10000000,
+		.tRPab		= 21000,
+		.tRCD		= 18000,
+		.tWR		= 15000,
+		.tRAS_min	= 42000,
+		.tRRD		= 10000,
+		.tWTR		= 10000,
+		.tXP		= 7500,
+		.tRTP		= 7500,
+		.tCKESR		= 15000,
+		.tDQSCK_max	= 5500,
+		.tFAW		= 50000,
+		.tZQCS		= 90000,
+		.tZQCL		= 360000,
+		.tZQinit	= 1000000,
+		.tRAS_max_ns	= 70000,
+		.tDQSCK_max_derated = 6000,
+	},
+	/* Speed bin 533(266 MHz) */
+	[1] = {
+		.max_freq	= 266666666,
+		.min_freq	= 10000000,
+		.tRPab		= 21000,
+		.tRCD		= 18000,
+		.tWR		= 15000,
+		.tRAS_min	= 42000,
+		.tRRD		= 10000,
+		.tWTR		= 7500,
+		.tXP		= 7500,
+		.tRTP		= 7500,
+		.tCKESR		= 15000,
+		.tDQSCK_max	= 5500,
+		.tFAW		= 50000,
+		.tZQCS		= 90000,
+		.tZQCL		= 360000,
+		.tZQinit	= 1000000,
+		.tRAS_max_ns	= 70000,
+		.tDQSCK_max_derated = 6000,
+	},
+	/* Speed bin 800(400 MHz) */
+	[2] = {
+		.max_freq	= 400000000,
+		.min_freq	= 10000000,
+		.tRPab		= 21000,
+		.tRCD		= 18000,
+		.tWR		= 15000,
+		.tRAS_min	= 42000,
+		.tRRD		= 10000,
+		.tWTR		= 7500,
+		.tXP		= 7500,
+		.tRTP		= 7500,
+		.tCKESR		= 15000,
+		.tDQSCK_max	= 5500,
+		.tFAW		= 50000,
+		.tZQCS		= 90000,
+		.tZQCL		= 360000,
+		.tZQinit	= 1000000,
+		.tRAS_max_ns	= 70000,
+		.tDQSCK_max_derated = 6000,
+	},
+	/* Speed bin 1066(533 MHz) */
+	[3] = {
+		.max_freq	= 533333333,
+		.min_freq	= 10000000,
+		.tRPab		= 21000,
+		.tRCD		= 18000,
+		.tWR		= 15000,
+		.tRAS_min	= 42000,
+		.tRRD		= 10000,
+		.tWTR		= 7500,
+		.tXP		= 7500,
+		.tRTP		= 7500,
+		.tCKESR		= 15000,
+		.tDQSCK_max	= 5500,
+		.tFAW		= 50000,
+		.tZQCS		= 90000,
+		.tZQCL		= 360000,
+		.tZQinit	= 1000000,
+		.tRAS_max_ns	= 70000,
+		.tDQSCK_max_derated = 5620,
+	},
+};
+EXPORT_SYMBOL_GPL(lpddr2_jedec_timings);
+
+const struct lpddr2_min_tck lpddr2_jedec_min_tck = {
+	.tRPab		= 3,
+	.tRCD		= 3,
+	.tWR		= 3,
+	.tRASmin	= 3,
+	.tRRD		= 2,
+	.tWTR		= 2,
+	.tXP		= 2,
+	.tRTP		= 2,
+	.tCKE		= 3,
+	.tCKESR		= 3,
+	.tFAW		= 8
+};
+EXPORT_SYMBOL_GPL(lpddr2_jedec_min_tck);
+
+const char *lpddr2_jedec_manufacturer(unsigned int manufacturer_id)
+{
+	switch (manufacturer_id) {
+	case LPDDR2_MANID_SAMSUNG:
+		return "Samsung";
+	case LPDDR2_MANID_QIMONDA:
+		return "Qimonda";
+	case LPDDR2_MANID_ELPIDA:
+		return "Elpida";
+	case LPDDR2_MANID_ETRON:
+		return "Etron";
+	case LPDDR2_MANID_NANYA:
+		return "Nanya";
+	case LPDDR2_MANID_HYNIX:
+		return "Hynix";
+	case LPDDR2_MANID_MOSEL:
+		return "Mosel";
+	case LPDDR2_MANID_WINBOND:
+		return "Winbond";
+	case LPDDR2_MANID_ESMT:
+		return "ESMT";
+	case LPDDR2_MANID_SPANSION:
+		return "Spansion";
+	case LPDDR2_MANID_SST:
+		return "SST";
+	case LPDDR2_MANID_ZMOS:
+		return "ZMOS";
+	case LPDDR2_MANID_INTEL:
+		return "Intel";
+	case LPDDR2_MANID_NUMONYX:
+		return "Numonyx";
+	case LPDDR2_MANID_MICRON:
+		return "Micron";
+	default:
+		break;
+	}
+
+	return "invalid";
+}
+EXPORT_SYMBOL_GPL(lpddr2_jedec_manufacturer);

linux-7.2.3/drivers/memory/jz4780-nemc.c

@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * JZ4780 NAND/external memory controller (NEMC)
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex@alex-smith.me.uk>
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/math64.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <linux/jz4780-nemc.h>
+
+#define NEMC_SMCRn(n)		(0x14 + (((n) - 1) * 4))
+#define NEMC_NFCSR		0x50
+
+#define NEMC_REG_LEN		0x54
+
+#define NEMC_SMCR_SMT		BIT(0)
+#define NEMC_SMCR_BW_SHIFT	6
+#define NEMC_SMCR_BW_MASK	(0x3 << NEMC_SMCR_BW_SHIFT)
+#define NEMC_SMCR_BW_8		(0 << 6)
+#define NEMC_SMCR_TAS_SHIFT	8
+#define NEMC_SMCR_TAS_MASK	(0xf << NEMC_SMCR_TAS_SHIFT)
+#define NEMC_SMCR_TAH_SHIFT	12
+#define NEMC_SMCR_TAH_MASK	(0xf << NEMC_SMCR_TAH_SHIFT)
+#define NEMC_SMCR_TBP_SHIFT	16
+#define NEMC_SMCR_TBP_MASK	(0xf << NEMC_SMCR_TBP_SHIFT)
+#define NEMC_SMCR_TAW_SHIFT	20
+#define NEMC_SMCR_TAW_MASK	(0xf << NEMC_SMCR_TAW_SHIFT)
+#define NEMC_SMCR_TSTRV_SHIFT	24
+#define NEMC_SMCR_TSTRV_MASK	(0x3f << NEMC_SMCR_TSTRV_SHIFT)
+
+#define NEMC_NFCSR_NFEn(n)	BIT(((n) - 1) << 1)
+#define NEMC_NFCSR_NFCEn(n)	BIT((((n) - 1) << 1) + 1)
+#define NEMC_NFCSR_TNFEn(n)	BIT(16 + (n) - 1)
+
+struct jz_soc_info {
+	u8 tas_tah_cycles_max;
+};
+
+struct jz4780_nemc {
+	spinlock_t lock;
+	struct device *dev;
+	const struct jz_soc_info *soc_info;
+	void __iomem *base;
+	struct clk *clk;
+	uint32_t clk_period;
+	unsigned long banks_present;
+};
+
+/**
+ * jz4780_nemc_num_banks() - count the number of banks referenced by a device
+ * @dev: device to count banks for, must be a child of the NEMC.
+ *
+ * Return: The number of unique NEMC banks referred to by the specified NEMC
+ * child device. Unique here means that a device that references the same bank
+ * multiple times in its "reg" property will only count once.
+ */
+unsigned int jz4780_nemc_num_banks(struct device *dev)
+{
+	const __be32 *prop;
+	unsigned int bank, count = 0;
+	unsigned long referenced = 0;
+	int i = 0;
+
+	while ((prop = of_get_address(dev->of_node, i++, NULL, NULL))) {
+		bank = of_read_number(prop, 1);
+		if (!(referenced & BIT(bank))) {
+			referenced |= BIT(bank);
+			count++;
+		}
+	}
+
+	return count;
+}
+EXPORT_SYMBOL(jz4780_nemc_num_banks);
+
+/**
+ * jz4780_nemc_set_type() - set the type of device connected to a bank
+ * @dev: child device of the NEMC.
+ * @bank: bank number to configure.
+ * @type: type of device connected to the bank.
+ */
+void jz4780_nemc_set_type(struct device *dev, unsigned int bank,
+			  enum jz4780_nemc_bank_type type)
+{
+	struct jz4780_nemc *nemc = dev_get_drvdata(dev->parent);
+	uint32_t nfcsr;
+
+	nfcsr = readl(nemc->base + NEMC_NFCSR);
+
+	/* TODO: Support toggle NAND devices. */
+	switch (type) {
+	case JZ4780_NEMC_BANK_SRAM:
+		nfcsr &= ~(NEMC_NFCSR_TNFEn(bank) | NEMC_NFCSR_NFEn(bank));
+		break;
+	case JZ4780_NEMC_BANK_NAND:
+		nfcsr &= ~NEMC_NFCSR_TNFEn(bank);
+		nfcsr |= NEMC_NFCSR_NFEn(bank);
+		break;
+	}
+
+	writel(nfcsr, nemc->base + NEMC_NFCSR);
+}
+EXPORT_SYMBOL(jz4780_nemc_set_type);
+
+/**
+ * jz4780_nemc_assert() - (de-)assert a NAND device's chip enable pin
+ * @dev: child device of the NEMC.
+ * @bank: bank number of device.
+ * @assert: whether the chip enable pin should be asserted.
+ *
+ * (De-)asserts the chip enable pin for the NAND device connected to the
+ * specified bank.
+ */
+void jz4780_nemc_assert(struct device *dev, unsigned int bank, bool assert)
+{
+	struct jz4780_nemc *nemc = dev_get_drvdata(dev->parent);
+	uint32_t nfcsr;
+
+	nfcsr = readl(nemc->base + NEMC_NFCSR);
+
+	if (assert)
+		nfcsr |= NEMC_NFCSR_NFCEn(bank);
+	else
+		nfcsr &= ~NEMC_NFCSR_NFCEn(bank);
+
+	writel(nfcsr, nemc->base + NEMC_NFCSR);
+}
+EXPORT_SYMBOL(jz4780_nemc_assert);
+
+static uint32_t jz4780_nemc_clk_period(struct jz4780_nemc *nemc)
+{
+	unsigned long rate;
+
+	rate = clk_get_rate(nemc->clk);
+	if (!rate)
+		return 0;
+
+	/* Return in picoseconds. */
+	return div64_ul(1000000000000ull, rate);
+}
+
+static uint32_t jz4780_nemc_ns_to_cycles(struct jz4780_nemc *nemc, uint32_t ns)
+{
+	return ((ns * 1000) + nemc->clk_period - 1) / nemc->clk_period;
+}
+
+static bool jz4780_nemc_configure_bank(struct jz4780_nemc *nemc,
+				       unsigned int bank,
+				       struct device_node *node)
+{
+	uint32_t smcr, val, cycles;
+
+	/*
+	 * Conversion of tBP and tAW cycle counts to values supported by the
+	 * hardware (round up to the next supported value).
+	 */
+	static const u8 convert_tBP_tAW[] = {
+		0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
+
+		/* 11 - 12 -> 12 cycles */
+		11, 11,
+
+		/* 13 - 15 -> 15 cycles */
+		12, 12, 12,
+
+		/* 16 - 20 -> 20 cycles */
+		13, 13, 13, 13, 13,
+
+		/* 21 - 25 -> 25 cycles */
+		14, 14, 14, 14, 14,
+
+		/* 26 - 31 -> 31 cycles */
+		15, 15, 15, 15, 15, 15
+	};
+
+	smcr = readl(nemc->base + NEMC_SMCRn(bank));
+	smcr &= ~NEMC_SMCR_SMT;
+
+	if (!of_property_read_u32(node, "ingenic,nemc-bus-width", &val)) {
+		smcr &= ~NEMC_SMCR_BW_MASK;
+		switch (val) {
+		case 8:
+			smcr |= NEMC_SMCR_BW_8;
+			break;
+		default:
+			/*
+			 * Earlier SoCs support a 16 bit bus width (the 4780
+			 * does not), until those are properly supported, error.
+			 */
+			dev_err(nemc->dev, "unsupported bus width: %u\n", val);
+			return false;
+		}
+	}
+
+	if (of_property_read_u32(node, "ingenic,nemc-tAS", &val) == 0) {
+		smcr &= ~NEMC_SMCR_TAS_MASK;
+		cycles = jz4780_nemc_ns_to_cycles(nemc, val);
+		if (cycles > nemc->soc_info->tas_tah_cycles_max) {
+			dev_err(nemc->dev, "tAS %u is too high (%u cycles)\n",
+				val, cycles);
+			return false;
+		}
+
+		smcr |= cycles << NEMC_SMCR_TAS_SHIFT;
+	}
+
+	if (of_property_read_u32(node, "ingenic,nemc-tAH", &val) == 0) {
+		smcr &= ~NEMC_SMCR_TAH_MASK;
+		cycles = jz4780_nemc_ns_to_cycles(nemc, val);
+		if (cycles > nemc->soc_info->tas_tah_cycles_max) {
+			dev_err(nemc->dev, "tAH %u is too high (%u cycles)\n",
+				val, cycles);
+			return false;
+		}
+
+		smcr |= cycles << NEMC_SMCR_TAH_SHIFT;
+	}
+
+	if (of_property_read_u32(node, "ingenic,nemc-tBP", &val) == 0) {
+		smcr &= ~NEMC_SMCR_TBP_MASK;
+		cycles = jz4780_nemc_ns_to_cycles(nemc, val);
+		if (cycles > 31) {
+			dev_err(nemc->dev, "tBP %u is too high (%u cycles)\n",
+				val, cycles);
+			return false;
+		}
+
+		smcr |= convert_tBP_tAW[cycles] << NEMC_SMCR_TBP_SHIFT;
+	}
+
+	if (of_property_read_u32(node, "ingenic,nemc-tAW", &val) == 0) {
+		smcr &= ~NEMC_SMCR_TAW_MASK;
+		cycles = jz4780_nemc_ns_to_cycles(nemc, val);
+		if (cycles > 31) {
+			dev_err(nemc->dev, "tAW %u is too high (%u cycles)\n",
+				val, cycles);
+			return false;
+		}
+
+		smcr |= convert_tBP_tAW[cycles] << NEMC_SMCR_TAW_SHIFT;
+	}
+
+	if (of_property_read_u32(node, "ingenic,nemc-tSTRV", &val) == 0) {
+		smcr &= ~NEMC_SMCR_TSTRV_MASK;
+		cycles = jz4780_nemc_ns_to_cycles(nemc, val);
+		if (cycles > 63) {
+			dev_err(nemc->dev, "tSTRV %u is too high (%u cycles)\n",
+				val, cycles);
+			return false;
+		}
+
+		smcr |= cycles << NEMC_SMCR_TSTRV_SHIFT;
+	}
+
+	writel(smcr, nemc->base + NEMC_SMCRn(bank));
+	return true;
+}
+
+static int jz4780_nemc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct jz4780_nemc *nemc;
+	struct resource *res;
+	struct device_node *child;
+	const __be32 *prop;
+	unsigned int bank;
+	unsigned long referenced;
+	int i, ret;
+
+	nemc = devm_kzalloc(dev, sizeof(*nemc), GFP_KERNEL);
+	if (!nemc)
+		return -ENOMEM;
+
+	nemc->soc_info = device_get_match_data(dev);
+	if (!nemc->soc_info)
+		return -EINVAL;
+
+	spin_lock_init(&nemc->lock);
+	nemc->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	/*
+	 * The driver currently only uses the registers up to offset
+	 * NEMC_REG_LEN. Since the EFUSE registers are in the middle of the
+	 * NEMC registers, we only request the registers we will use for now;
+	 * that way the EFUSE driver can probe too.
+	 */
+	if (!devm_request_mem_region(dev, res->start, NEMC_REG_LEN, dev_name(dev))) {
+		dev_err(dev, "unable to request I/O memory region\n");
+		return -EBUSY;
+	}
+
+	nemc->base = devm_ioremap(dev, res->start, NEMC_REG_LEN);
+	if (!nemc->base) {
+		dev_err(dev, "failed to get I/O memory\n");
+		return -ENOMEM;
+	}
+
+	writel(0, nemc->base + NEMC_NFCSR);
+
+	nemc->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(nemc->clk)) {
+		dev_err(dev, "failed to get clock\n");
+		return PTR_ERR(nemc->clk);
+	}
+
+	ret = clk_prepare_enable(nemc->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clock: %d\n", ret);
+		return ret;
+	}
+
+	nemc->clk_period = jz4780_nemc_clk_period(nemc);
+	if (!nemc->clk_period) {
+		dev_err(dev, "failed to calculate clock period\n");
+		clk_disable_unprepare(nemc->clk);
+		return -EINVAL;
+	}
+
+	/*
+	 * Iterate over child devices, check that they do not conflict with
+	 * each other, and register child devices for them. If a child device
+	 * has invalid properties, it is ignored and no platform device is
+	 * registered for it.
+	 */
+	for_each_child_of_node(nemc->dev->of_node, child) {
+		referenced = 0;
+		i = 0;
+		while ((prop = of_get_address(child, i++, NULL, NULL))) {
+			bank = of_read_number(prop, 1);
+			if (bank < 1 || bank >= JZ4780_NEMC_NUM_BANKS) {
+				dev_err(nemc->dev,
+					"%pOF requests invalid bank %u\n",
+					child, bank);
+
+				/* Will continue the outer loop below. */
+				referenced = 0;
+				break;
+			}
+
+			referenced |= BIT(bank);
+		}
+
+		if (!referenced) {
+			dev_err(nemc->dev, "%pOF has no addresses\n",
+				child);
+			continue;
+		} else if (nemc->banks_present & referenced) {
+			dev_err(nemc->dev, "%pOF conflicts with another node\n",
+				child);
+			continue;
+		}
+
+		/* Configure bank parameters. */
+		for_each_set_bit(bank, &referenced, JZ4780_NEMC_NUM_BANKS) {
+			if (!jz4780_nemc_configure_bank(nemc, bank, child)) {
+				referenced = 0;
+				break;
+			}
+		}
+
+		if (referenced) {
+			if (of_platform_device_create(child, NULL, nemc->dev))
+				nemc->banks_present |= referenced;
+		}
+	}
+
+	platform_set_drvdata(pdev, nemc);
+	dev_info(dev, "JZ4780 NEMC initialised\n");
+	return 0;
+}
+
+static void jz4780_nemc_remove(struct platform_device *pdev)
+{
+	struct jz4780_nemc *nemc = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(nemc->clk);
+}
+
+static const struct jz_soc_info jz4740_soc_info = {
+	.tas_tah_cycles_max = 7,
+};
+
+static const struct jz_soc_info jz4780_soc_info = {
+	.tas_tah_cycles_max = 15,
+};
+
+static const struct of_device_id jz4780_nemc_dt_match[] = {
+	{ .compatible = "ingenic,jz4740-nemc", .data = &jz4740_soc_info, },
+	{ .compatible = "ingenic,jz4780-nemc", .data = &jz4780_soc_info, },
+	{},
+};
+
+static struct platform_driver jz4780_nemc_driver = {
+	.probe		= jz4780_nemc_probe,
+	.remove		= jz4780_nemc_remove,
+	.driver	= {
+		.name	= "jz4780-nemc",
+		.of_match_table = of_match_ptr(jz4780_nemc_dt_match),
+	},
+};
+
+static int __init jz4780_nemc_init(void)
+{
+	return platform_driver_register(&jz4780_nemc_driver);
+}
+subsys_initcall(jz4780_nemc_init);

linux-7.2.3/drivers/memory/mtk-smi.c

@@ -0,0 +1,991 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015-2016 MediaTek Inc.
+ * Author: Yong Wu <yong.wu@mediatek.com>
+ */
+#include <linux/arm-smccc.h>
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/soc/mediatek/mtk_sip_svc.h>
+#include <soc/mediatek/smi.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
+#include <dt-bindings/memory/mtk-memory-port.h>
+
+/* SMI COMMON */
+#define SMI_L1LEN			0x100
+
+#define SMI_L1_ARB			0x200
+#define SMI_BUS_SEL			0x220
+#define SMI_BUS_LARB_SHIFT(larbid)	((larbid) << 1)
+/* All are MMU0 defaultly. Only specialize mmu1 here. */
+#define F_MMU1_LARB(larbid)		(0x1 << SMI_BUS_LARB_SHIFT(larbid))
+
+#define SMI_READ_FIFO_TH		0x230
+#define SMI_M4U_TH			0x234
+#define SMI_FIFO_TH1			0x238
+#define SMI_FIFO_TH2			0x23c
+#define SMI_DCM				0x300
+#define SMI_DUMMY			0x444
+
+/* SMI LARB */
+#define SMI_LARB_SLP_CON                0xc
+#define SLP_PROT_EN                     BIT(0)
+#define SLP_PROT_RDY                    BIT(16)
+
+#define SMI_LARB_CMD_THRT_CON		0x24
+#define SMI_LARB_THRT_RD_NU_LMT_MSK	GENMASK(7, 4)
+#define SMI_LARB_THRT_RD_NU_LMT		(5 << 4)
+
+#define SMI_LARB_SW_FLAG		0x40
+#define SMI_LARB_SW_FLAG_1		0x1
+
+#define SMI_LARB_OSTDL_PORT		0x200
+#define SMI_LARB_OSTDL_PORTx(id)	(SMI_LARB_OSTDL_PORT + (((id) & 0x1f) << 2))
+
+/* Below are about mmu enable registers, they are different in SoCs */
+/* gen1: mt2701 */
+#define REG_SMI_SECUR_CON_BASE		0x5c0
+
+/* every register control 8 port, register offset 0x4 */
+#define REG_SMI_SECUR_CON_OFFSET(id)	(((id) >> 3) << 2)
+#define REG_SMI_SECUR_CON_ADDR(id)	\
+	(REG_SMI_SECUR_CON_BASE + REG_SMI_SECUR_CON_OFFSET(id))
+
+/*
+ * every port have 4 bit to control, bit[port + 3] control virtual or physical,
+ * bit[port + 2 : port + 1] control the domain, bit[port] control the security
+ * or non-security.
+ */
+#define SMI_SECUR_CON_VAL_MSK(id)	(~(0xf << (((id) & 0x7) << 2)))
+#define SMI_SECUR_CON_VAL_VIRT(id)	BIT((((id) & 0x7) << 2) + 3)
+/* mt2701 domain should be set to 3 */
+#define SMI_SECUR_CON_VAL_DOMAIN(id)	(0x3 << ((((id) & 0x7) << 2) + 1))
+
+/* gen2: */
+/* mt8167 */
+#define MT8167_SMI_LARB_MMU_EN		0xfc0
+
+/* mt8173 */
+#define MT8173_SMI_LARB_MMU_EN		0xf00
+
+/* general */
+#define SMI_LARB_NONSEC_CON(id)		(0x380 + ((id) * 4))
+#define F_MMU_EN			BIT(0)
+#define BANK_SEL(id)			({		\
+	u32 _id = (id) & 0x3;				\
+	(_id << 8 | _id << 10 | _id << 12 | _id << 14);	\
+})
+
+#define SMI_COMMON_INIT_REGS_NR		6
+#define SMI_LARB_PORT_NR_MAX		32
+
+#define MTK_SMI_FLAG_THRT_UPDATE	BIT(0)
+#define MTK_SMI_FLAG_SW_FLAG		BIT(1)
+#define MTK_SMI_FLAG_SLEEP_CTL		BIT(2)
+#define MTK_SMI_FLAG_CFG_PORT_SEC_CTL	BIT(3)
+#define MTK_SMI_CAPS(flags, _x)		(!!((flags) & (_x)))
+
+struct mtk_smi_reg_pair {
+	unsigned int		offset;
+	u32			value;
+};
+
+enum mtk_smi_type {
+	MTK_SMI_GEN1,
+	MTK_SMI_GEN2,		/* gen2 smi common */
+	MTK_SMI_GEN2_SUB_COMM,	/* gen2 smi sub common */
+};
+
+/* larbs: Require apb/smi clocks while gals is optional. */
+static const char * const mtk_smi_larb_clks[] = {"apb", "smi", "gals"};
+#define MTK_SMI_LARB_REQ_CLK_NR		2
+#define MTK_SMI_LARB_OPT_CLK_NR		1
+
+/*
+ * common: Require these four clocks in has_gals case. Otherwise, only apb/smi are required.
+ * sub common: Require apb/smi/gals0 clocks in has_gals case. Otherwise, only apb/smi are required.
+ */
+static const char * const mtk_smi_common_clks[] = {"apb", "smi", "gals0", "gals1"};
+#define MTK_SMI_CLK_NR_MAX		ARRAY_SIZE(mtk_smi_common_clks)
+#define MTK_SMI_COM_REQ_CLK_NR		2
+#define MTK_SMI_COM_GALS_REQ_CLK_NR	MTK_SMI_CLK_NR_MAX
+#define MTK_SMI_SUB_COM_GALS_REQ_CLK_NR 3
+
+struct mtk_smi_common_plat {
+	enum mtk_smi_type	type;
+	bool			has_gals;
+	u32			bus_sel; /* Balance some larbs to enter mmu0 or mmu1 */
+
+	const struct mtk_smi_reg_pair	*init;
+};
+
+struct mtk_smi_larb_gen {
+	int port_in_larb[MTK_LARB_NR_MAX + 1];
+	int				(*config_port)(struct device *dev);
+	unsigned int			larb_direct_to_common_mask;
+	unsigned int			flags_general;
+	const u8			(*ostd)[SMI_LARB_PORT_NR_MAX];
+};
+
+struct mtk_smi {
+	struct device			*dev;
+	unsigned int			clk_num;
+	struct clk_bulk_data		clks[MTK_SMI_CLK_NR_MAX];
+	struct clk			*clk_async; /*only needed by mt2701*/
+	union {
+		void __iomem		*smi_ao_base; /* only for gen1 */
+		void __iomem		*base;	      /* only for gen2 */
+	};
+	struct device			*smi_common_dev; /* for sub common */
+	const struct mtk_smi_common_plat *plat;
+};
+
+struct mtk_smi_larb { /* larb: local arbiter */
+	struct mtk_smi			smi;
+	void __iomem			*base;
+	struct device			*smi_common_dev; /* common or sub-common dev */
+	const struct mtk_smi_larb_gen	*larb_gen;
+	int				larbid;
+	u32				*mmu;
+	unsigned char			*bank;
+};
+
+static int
+mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
+{
+	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+	struct mtk_smi_larb_iommu *larb_mmu = data;
+	unsigned int         i;
+
+	for (i = 0; i < MTK_LARB_NR_MAX; i++) {
+		if (dev == larb_mmu[i].dev) {
+			larb->larbid = i;
+			larb->mmu = &larb_mmu[i].mmu;
+			larb->bank = larb_mmu[i].bank;
+			return 0;
+		}
+	}
+	return -ENODEV;
+}
+
+static void
+mtk_smi_larb_unbind(struct device *dev, struct device *master, void *data)
+{
+	/* Do nothing as the iommu is always enabled. */
+}
+
+static const struct component_ops mtk_smi_larb_component_ops = {
+	.bind = mtk_smi_larb_bind,
+	.unbind = mtk_smi_larb_unbind,
+};
+
+static int mtk_smi_larb_config_port_gen1(struct device *dev)
+{
+	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+	const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
+	struct mtk_smi *common = dev_get_drvdata(larb->smi_common_dev);
+	int i, m4u_port_id, larb_port_num;
+	u32 sec_con_val, reg_val;
+
+	m4u_port_id = larb_gen->port_in_larb[larb->larbid];
+	larb_port_num = larb_gen->port_in_larb[larb->larbid + 1]
+			- larb_gen->port_in_larb[larb->larbid];
+
+	for (i = 0; i < larb_port_num; i++, m4u_port_id++) {
+		if (*larb->mmu & BIT(i)) {
+			/* bit[port + 3] controls the virtual or physical */
+			sec_con_val = SMI_SECUR_CON_VAL_VIRT(m4u_port_id);
+		} else {
+			/* do not need to enable m4u for this port */
+			continue;
+		}
+		reg_val = readl(common->smi_ao_base
+			+ REG_SMI_SECUR_CON_ADDR(m4u_port_id));
+		reg_val &= SMI_SECUR_CON_VAL_MSK(m4u_port_id);
+		reg_val |= sec_con_val;
+		reg_val |= SMI_SECUR_CON_VAL_DOMAIN(m4u_port_id);
+		writel(reg_val,
+			common->smi_ao_base
+			+ REG_SMI_SECUR_CON_ADDR(m4u_port_id));
+	}
+	return 0;
+}
+
+static int mtk_smi_larb_config_port_mt8167(struct device *dev)
+{
+	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+
+	writel(*larb->mmu, larb->base + MT8167_SMI_LARB_MMU_EN);
+	return 0;
+}
+
+static int mtk_smi_larb_config_port_mt8173(struct device *dev)
+{
+	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+
+	writel(*larb->mmu, larb->base + MT8173_SMI_LARB_MMU_EN);
+	return 0;
+}
+
+static int mtk_smi_larb_config_port_gen2_general(struct device *dev)
+{
+	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+	u32 reg, flags_general = larb->larb_gen->flags_general;
+	const u8 *larbostd = larb->larb_gen->ostd ? larb->larb_gen->ostd[larb->larbid] : NULL;
+	struct arm_smccc_res res;
+	int i;
+
+	if (BIT(larb->larbid) & larb->larb_gen->larb_direct_to_common_mask)
+		return 0;
+
+	if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_THRT_UPDATE)) {
+		reg = readl_relaxed(larb->base + SMI_LARB_CMD_THRT_CON);
+		reg &= ~SMI_LARB_THRT_RD_NU_LMT_MSK;
+		reg |= SMI_LARB_THRT_RD_NU_LMT;
+		writel_relaxed(reg, larb->base + SMI_LARB_CMD_THRT_CON);
+	}
+
+	if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_SW_FLAG))
+		writel_relaxed(SMI_LARB_SW_FLAG_1, larb->base + SMI_LARB_SW_FLAG);
+
+	for (i = 0; i < SMI_LARB_PORT_NR_MAX && larbostd && !!larbostd[i]; i++)
+		writel_relaxed(larbostd[i], larb->base + SMI_LARB_OSTDL_PORTx(i));
+
+	/*
+	 * When mmu_en bits are in security world, the bank_sel still is in the
+	 * LARB_NONSEC_CON below. And the mmu_en bits of LARB_NONSEC_CON have no
+	 * effect in this case.
+	 */
+	if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_CFG_PORT_SEC_CTL)) {
+		arm_smccc_smc(MTK_SIP_KERNEL_IOMMU_CONTROL, IOMMU_ATF_CMD_CONFIG_SMI_LARB,
+			      larb->larbid, *larb->mmu, 0, 0, 0, 0, &res);
+		if (res.a0 != 0) {
+			dev_err(dev, "Enable iommu fail, ret %ld\n", res.a0);
+			return -EINVAL;
+		}
+	}
+
+	for_each_set_bit(i, (unsigned long *)larb->mmu, 32) {
+		reg = readl_relaxed(larb->base + SMI_LARB_NONSEC_CON(i));
+		reg |= F_MMU_EN;
+		reg |= BANK_SEL(larb->bank[i]);
+		writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
+	}
+	return 0;
+}
+
+static const u8 mtk_smi_larb_mt6893_ostd[][SMI_LARB_PORT_NR_MAX] = {
+	[0] = {0x2, 0x6, 0x2, 0x2, 0x2, 0x28, 0x18, 0x18, 0x1, 0x1, 0x1, 0x8,
+	       0x8, 0x1, 0x3f},
+	[1] = {0x2, 0x6, 0x2, 0x2, 0x2, 0x28, 0x18, 0x18, 0x1, 0x1, 0x1, 0x8,
+	       0x8, 0x1, 0x3f},
+	[2] = {0x5, 0x5, 0x5, 0x5, 0x1, 0x3f},
+	[3] = {0x5, 0x5, 0x5, 0x5, 0x1, 0x3f},
+	[4] = {0x28, 0x19, 0xb, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x4, 0x1},
+	[5] = {0x1, 0x1, 0x4, 0x1, 0x1, 0x1, 0x1, 0x16},
+	[6] = {},
+	[7] = {0x1, 0x4, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x4, 0x4, 0x1,
+	       0x4, 0x1, 0xa, 0x6, 0x1, 0xa, 0x6, 0x1, 0x1, 0x1, 0x1, 0x5,
+	       0x3, 0x3, 0x4},
+	[8] = {0x1, 0x4, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x4, 0x4, 0x1,
+	       0x4, 0x1, 0xa, 0x6, 0x1, 0xa, 0x6, 0x1, 0x1, 0x1, 0x1, 0x5,
+	       0x3, 0x3, 0x4},
+	[9] = {0x9, 0x7, 0xf, 0x8, 0x1, 0x8, 0x9, 0x3, 0x3, 0x6, 0x7, 0x4,
+	       0x9, 0x3, 0x4, 0xe, 0x1, 0x7, 0x8, 0x7, 0x7, 0x1, 0x6, 0x2,
+	       0xf, 0x8, 0x1, 0x1, 0x1},
+	[10] = {},
+	[11] = {0x9, 0x7, 0xf, 0x8, 0x1, 0x8, 0x9, 0x3, 0x3, 0x6, 0x7, 0x4,
+		0x9, 0x3, 0x4, 0xe, 0x1, 0x7, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1,
+		0x1, 0x1, 0x1, 0x1, 0x1},
+	[12] = {},
+	[13] = {0x2, 0xc, 0xc, 0xe, 0x6, 0x6, 0x6, 0x6, 0x6, 0x12, 0x6, 0x1},
+	[14] = {0x2, 0xc, 0xc, 0x28, 0x12, 0x6},
+	[15] = {0x28, 0x1, 0x2, 0x28, 0x1},
+	[16] = {0x28, 0x14, 0x2, 0xc, 0x18, 0x2, 0x14, 0x14, 0x4, 0x4, 0x4, 0x2,
+		0x4, 0x2, 0x8, 0x4, 0x4},
+	[17] = {0x28, 0x14, 0x2, 0xc, 0x18, 0x2, 0x14, 0x14, 0x4, 0x4, 0x4, 0x2,
+		0x4, 0x2, 0x8, 0x4, 0x4},
+	[18] = {0x28, 0x14, 0x2, 0xc, 0x18, 0x2, 0x14, 0x14, 0x4, 0x4, 0x4, 0x2,
+		0x4, 0x2, 0x8, 0x4, 0x4},
+	[19] = {0x2, 0x2, 0x4, 0x2},
+	[20] = {0x9, 0x9, 0x5, 0x5, 0x1, 0x1},
+};
+
+static const u8 mtk_smi_larb_mt8186_ostd[][SMI_LARB_PORT_NR_MAX] = {
+	[0] = {0x2, 0x1, 0x8, 0x1,},
+	[1] = {0x1, 0x3, 0x1, 0x1,},
+	[2] = {0x6, 0x1, 0x4, 0x1,},
+	[3] = {},
+	[4] = {0xf, 0x1, 0x5, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1,
+	       0x1, 0x1, 0x1,},
+	[5] = {},
+	[6] = {},
+	[7] = {0x1, 0x3, 0x1, 0x1, 0x1, 0x3, 0x2, 0xd, 0x7, 0x5, 0x3,
+	       0x1, 0x5,},
+	[8] = {0x1, 0x2, 0x2,},
+	[9] = {0x9, 0x7, 0xf, 0x8, 0x1, 0x8, 0x9, 0x3, 0x3, 0xb, 0x7, 0x4,
+	       0x9, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1,
+	       0x1, 0x1, 0x1, 0x1, 0x1,},
+	[10] = {},
+	[11] = {0x9, 0x7, 0xf, 0x8, 0x1, 0x8, 0x9, 0x3, 0x3, 0xb, 0x7, 0x4,
+		0x9, 0x1, 0x1, 0x1, 0x1, 0x1, 0x8, 0x7, 0x7, 0x1, 0x6, 0x2,
+		0xf, 0x8, 0x1, 0x1, 0x1,},
+	[12] = {},
+	[13] = {0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x6, 0x6, 0x6, 0x1, 0x1, 0x1,},
+	[14] = {0x1, 0x1, 0x1, 0x1, 0x1, 0x1,},
+	[15] = {},
+	[16] = {0x28, 0x14, 0x2, 0xc, 0x18, 0x1, 0x14, 0x1, 0x4, 0x4, 0x4,
+		0x2, 0x4, 0x2, 0x8, 0x4, 0x4,},
+	[17] = {0x28, 0x14, 0x2, 0xc, 0x18, 0x1, 0x14, 0x1, 0x4, 0x4, 0x4,
+		0x2, 0x4, 0x2, 0x8, 0x4, 0x4,},
+	[18] = {},
+	[19] = {0x1, 0x1, 0x1, 0x1,},
+	[20] = {0x2, 0x2, 0x2, 0x2, 0x1, 0x1,},
+};
+
+static const u8 mtk_smi_larb_mt8188_ostd[][SMI_LARB_PORT_NR_MAX] = {
+	[0] = {0x02, 0x18, 0x22, 0x22, 0x01, 0x02, 0x0a,},
+	[1] = {0x12, 0x02, 0x14, 0x14, 0x01, 0x18, 0x0a,},
+	[2] = {0x12, 0x12, 0x12, 0x12, 0x0a,},
+	[3] = {0x12, 0x12, 0x12, 0x12, 0x28, 0x28, 0x0a,},
+	[4] = {0x06, 0x01, 0x17, 0x06, 0x0a, 0x07, 0x07,},
+	[5] = {0x02, 0x01, 0x04, 0x02, 0x06, 0x01, 0x06, 0x0a,},
+	[6] = {0x06, 0x01, 0x06, 0x0a,},
+	[7] = {0x0c, 0x0c, 0x12,},
+	[8] = {0x0c, 0x01, 0x0a, 0x05, 0x02, 0x03, 0x01, 0x01, 0x14, 0x14,
+	       0x0a, 0x14, 0x1e, 0x01, 0x0c, 0x0a, 0x05, 0x02, 0x02, 0x05,
+	       0x03, 0x01, 0x1e, 0x01, 0x05,},
+	[9] = {0x1e, 0x01, 0x0a, 0x0a, 0x01, 0x01, 0x03, 0x1e, 0x1e, 0x10,
+	       0x07, 0x01, 0x0a, 0x06, 0x03, 0x03, 0x0e, 0x01, 0x04, 0x28,},
+	[10] = {0x03, 0x20, 0x01, 0x20, 0x01, 0x01, 0x14, 0x0a, 0x0a, 0x0c,
+		0x0a, 0x05, 0x02, 0x03, 0x02, 0x14, 0x0a, 0x0a, 0x14, 0x14,
+		0x14, 0x01, 0x01, 0x14, 0x1e, 0x01, 0x05, 0x03, 0x02, 0x28,},
+	[11] = {0x03, 0x20, 0x01, 0x20, 0x01, 0x01, 0x14, 0x0a, 0x0a, 0x0c,
+		0x0a, 0x05, 0x02, 0x03, 0x02, 0x14, 0x0a, 0x0a, 0x14, 0x14,
+		0x14, 0x01, 0x01, 0x14, 0x1e, 0x01, 0x05, 0x03, 0x02, 0x28,},
+	[12] = {0x03, 0x20, 0x01, 0x20, 0x01, 0x01, 0x14, 0x0a, 0x0a, 0x0c,
+		0x0a, 0x05, 0x02, 0x03, 0x02, 0x14, 0x0a, 0x0a, 0x14, 0x14,
+		0x14, 0x01, 0x01, 0x14, 0x1e, 0x01, 0x05, 0x03, 0x02, 0x28,},
+	[13] = {0x07, 0x02, 0x04, 0x02, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
+		0x07, 0x02, 0x04, 0x02, 0x05, 0x05,},
+	[14] = {0x02, 0x02, 0x0c, 0x0c, 0x0c, 0x0c, 0x01, 0x01, 0x02, 0x02,
+		0x02, 0x02, 0x0c, 0x0c, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
+		0x02, 0x02, 0x01, 0x01,},
+	[15] = {0x0c, 0x0c, 0x02, 0x02, 0x02, 0x02, 0x01, 0x01, 0x0c, 0x0c,
+		0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x01, 0x02,
+		0x0c, 0x01, 0x01,},
+	[16] = {0x28, 0x28, 0x03, 0x01, 0x01, 0x03, 0x14, 0x14, 0x0a, 0x0d,
+		0x03, 0x05, 0x0e, 0x01, 0x01, 0x05, 0x06, 0x0d, 0x01,},
+	[17] = {0x28, 0x02, 0x02, 0x12, 0x02, 0x12, 0x10, 0x02, 0x02, 0x0a,
+		0x12, 0x02, 0x02, 0x0a, 0x16, 0x02, 0x04,},
+	[18] = {0x28, 0x02, 0x02, 0x12, 0x02, 0x12, 0x10, 0x02, 0x02, 0x0a,
+		0x12, 0x02, 0x02, 0x0a, 0x16, 0x02, 0x04,},
+	[19] = {0x1a, 0x0e, 0x0a, 0x0a, 0x0c, 0x0e, 0x10,},
+	[20] = {0x1a, 0x0e, 0x0a, 0x0a, 0x0c, 0x0e, 0x10,},
+	[21] = {0x01, 0x04, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04, 0x04, 0x01,
+		0x01, 0x01, 0x04, 0x0a, 0x06, 0x01, 0x01, 0x01, 0x0a, 0x06,
+		0x01, 0x01, 0x05, 0x03, 0x03, 0x04, 0x01,},
+	[22] = {0x28, 0x19, 0x0c, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04,
+		0x01,},
+	[23] = {0x01, 0x01, 0x04, 0x01, 0x01, 0x01, 0x18, 0x01, 0x01,},
+	[24] = {0x12, 0x06, 0x12, 0x06,},
+	[25] = {0x01},
+};
+
+static const u8 mtk_smi_larb_mt8192_ostd[][SMI_LARB_PORT_NR_MAX] = {
+	[0] = {0x2, 0x2, 0x28, 0xa, 0xc, 0x28,},
+	[1] = {0x2, 0x2, 0x18, 0x18, 0x18, 0xa, 0xc, 0x28,},
+	[2] = {0x5, 0x5, 0x5, 0x5, 0x1,},
+	[3] = {},
+	[4] = {0x28, 0x19, 0xb, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x4, 0x1,},
+	[5] = {0x1, 0x1, 0x4, 0x1, 0x1, 0x1, 0x1, 0x16,},
+	[6] = {},
+	[7] = {0x1, 0x3, 0x2, 0x1, 0x1, 0x5, 0x2, 0x12, 0x13, 0x4, 0x4, 0x1,
+	       0x4, 0x2, 0x1,},
+	[8] = {},
+	[9] = {0xa, 0x7, 0xf, 0x8, 0x1, 0x8, 0x9, 0x3, 0x3, 0x6, 0x7, 0x4,
+	       0xa, 0x3, 0x4, 0xe, 0x1, 0x7, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1,
+	       0x1, 0x1, 0x1, 0x1, 0x1,},
+	[10] = {},
+	[11] = {0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1,
+		0x1, 0x1, 0x1, 0xe, 0x1, 0x7, 0x8, 0x7, 0x7, 0x1, 0x6, 0x2,
+		0xf, 0x8, 0x1, 0x1, 0x1,},
+	[12] = {},
+	[13] = {0x2, 0xc, 0xc, 0xe, 0x6, 0x6, 0x6, 0x6, 0x6, 0x12, 0x6, 0x28,
+		0x2, 0xc, 0xc, 0x28, 0x12, 0x6,},
+	[14] = {},
+	[15] = {0x28, 0x14, 0x2, 0xc, 0x18, 0x4, 0x28, 0x14, 0x4, 0x4, 0x4, 0x2,
+		0x4, 0x2, 0x8, 0x4, 0x4,},
+	[16] = {0x28, 0x14, 0x2, 0xc, 0x18, 0x4, 0x28, 0x14, 0x4, 0x4, 0x4, 0x2,
+		0x4, 0x2, 0x8, 0x4, 0x4,},
+	[17] = {0x28, 0x14, 0x2, 0xc, 0x18, 0x4, 0x28, 0x14, 0x4, 0x4, 0x4, 0x2,
+		0x4, 0x2, 0x8, 0x4, 0x4,},
+	[18] = {0x2, 0x2, 0x4, 0x2,},
+	[19] = {0x9, 0x9, 0x5, 0x5, 0x1, 0x1,},
+};
+
+static const u8 mtk_smi_larb_mt8195_ostd[][SMI_LARB_PORT_NR_MAX] = {
+	[0] = {0x0a, 0xc, 0x22, 0x22, 0x01, 0x0a,}, /* larb0 */
+	[1] = {0x0a, 0xc, 0x22, 0x22, 0x01, 0x0a,}, /* larb1 */
+	[2] = {0x12, 0x12, 0x12, 0x12, 0x0a,},      /* ... */
+	[3] = {0x12, 0x12, 0x12, 0x12, 0x28, 0x28, 0x0a,},
+	[4] = {0x06, 0x01, 0x17, 0x06, 0x0a,},
+	[5] = {0x06, 0x01, 0x17, 0x06, 0x06, 0x01, 0x06, 0x0a,},
+	[6] = {0x06, 0x01, 0x06, 0x0a,},
+	[7] = {0x0c, 0x0c, 0x12,},
+	[8] = {0x0c, 0x0c, 0x12,},
+	[9] = {0x0a, 0x08, 0x04, 0x06, 0x01, 0x01, 0x10, 0x18, 0x11, 0x0a,
+		0x08, 0x04, 0x11, 0x06, 0x02, 0x06, 0x01, 0x11, 0x11, 0x06,},
+	[10] = {0x18, 0x08, 0x01, 0x01, 0x20, 0x12, 0x18, 0x06, 0x05, 0x10,
+		0x08, 0x08, 0x10, 0x08, 0x08, 0x18, 0x0c, 0x09, 0x0b, 0x0d,
+		0x0d, 0x06, 0x10, 0x10,},
+	[11] = {0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x01, 0x01, 0x01, 0x01,},
+	[12] = {0x09, 0x09, 0x05, 0x05, 0x0c, 0x18, 0x02, 0x02, 0x04, 0x02,},
+	[13] = {0x02, 0x02, 0x12, 0x12, 0x02, 0x02, 0x02, 0x02, 0x08, 0x01,},
+	[14] = {0x12, 0x12, 0x02, 0x02, 0x02, 0x02, 0x16, 0x01, 0x16, 0x01,
+		0x01, 0x02, 0x02, 0x08, 0x02,},
+	[15] = {},
+	[16] = {0x28, 0x02, 0x02, 0x12, 0x02, 0x12, 0x10, 0x02, 0x02, 0x0a,
+		0x12, 0x02, 0x0a, 0x16, 0x02, 0x04,},
+	[17] = {0x1a, 0x0e, 0x0a, 0x0a, 0x0c, 0x0e, 0x10,},
+	[18] = {0x12, 0x06, 0x12, 0x06,},
+	[19] = {0x01, 0x04, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04, 0x04, 0x01,
+		0x01, 0x01, 0x04, 0x0a, 0x06, 0x01, 0x01, 0x01, 0x0a, 0x06,
+		0x01, 0x01, 0x05, 0x03, 0x03, 0x04, 0x01,},
+	[20] = {0x01, 0x04, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04, 0x04, 0x01,
+		0x01, 0x01, 0x04, 0x0a, 0x06, 0x01, 0x01, 0x01, 0x0a, 0x06,
+		0x01, 0x01, 0x05, 0x03, 0x03, 0x04, 0x01,},
+	[21] = {0x28, 0x19, 0x0c, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04,},
+	[22] = {0x28, 0x19, 0x0c, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04,},
+	[23] = {0x18, 0x01,},
+	[24] = {0x01, 0x01, 0x04, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04, 0x01,
+		0x01, 0x01,},
+	[25] = {0x02, 0x02, 0x02, 0x28, 0x16, 0x02, 0x02, 0x02, 0x12, 0x16,
+		0x02, 0x01,},
+	[26] = {0x02, 0x02, 0x02, 0x28, 0x16, 0x02, 0x02, 0x02, 0x12, 0x16,
+		0x02, 0x01,},
+	[27] = {0x02, 0x02, 0x02, 0x28, 0x16, 0x02, 0x02, 0x02, 0x12, 0x16,
+		0x02, 0x01,},
+	[28] = {0x1a, 0x0e, 0x0a, 0x0a, 0x0c, 0x0e, 0x10,},
+};
+
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt2701 = {
+	.port_in_larb = {
+		LARB0_PORT_OFFSET, LARB1_PORT_OFFSET,
+		LARB2_PORT_OFFSET, LARB3_PORT_OFFSET
+	},
+	.config_port = mtk_smi_larb_config_port_gen1,
+};
+
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt2712 = {
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.larb_direct_to_common_mask = BIT(8) | BIT(9),      /* bdpsys */
+};
+
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt6779 = {
+	.config_port  = mtk_smi_larb_config_port_gen2_general,
+	.larb_direct_to_common_mask =
+		BIT(4) | BIT(6) | BIT(11) | BIT(12) | BIT(13),
+		/* DUMMY | IPU0 | IPU1 | CCU | MDLA */
+};
+
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt6893 = {
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.flags_general	            = MTK_SMI_FLAG_THRT_UPDATE | MTK_SMI_FLAG_SW_FLAG,
+	.ostd		            = mtk_smi_larb_mt6893_ostd,
+};
+
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8167 = {
+	/* mt8167 do not need the port in larb */
+	.config_port = mtk_smi_larb_config_port_mt8167,
+};
+
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8173 = {
+	/* mt8173 do not need the port in larb */
+	.config_port = mtk_smi_larb_config_port_mt8173,
+};
+
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.larb_direct_to_common_mask = BIT(2) | BIT(3) | BIT(7),
+				      /* IPU0 | IPU1 | CCU */
+};
+
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8186 = {
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.flags_general	            = MTK_SMI_FLAG_SLEEP_CTL,
+	.ostd			    = mtk_smi_larb_mt8186_ostd,
+};
+
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8188 = {
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.flags_general	            = MTK_SMI_FLAG_THRT_UPDATE | MTK_SMI_FLAG_SW_FLAG |
+				      MTK_SMI_FLAG_SLEEP_CTL | MTK_SMI_FLAG_CFG_PORT_SEC_CTL,
+	.ostd		            = mtk_smi_larb_mt8188_ostd,
+};
+
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.ostd			    = mtk_smi_larb_mt8192_ostd,
+};
+
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8195 = {
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.flags_general	            = MTK_SMI_FLAG_THRT_UPDATE | MTK_SMI_FLAG_SW_FLAG |
+				      MTK_SMI_FLAG_SLEEP_CTL,
+	.ostd		            = mtk_smi_larb_mt8195_ostd,
+};
+
+static const struct of_device_id mtk_smi_larb_of_ids[] = {
+	{.compatible = "mediatek,mt2701-smi-larb", .data = &mtk_smi_larb_mt2701},
+	{.compatible = "mediatek,mt2712-smi-larb", .data = &mtk_smi_larb_mt2712},
+	{.compatible = "mediatek,mt6779-smi-larb", .data = &mtk_smi_larb_mt6779},
+	{.compatible = "mediatek,mt6795-smi-larb", .data = &mtk_smi_larb_mt8173},
+	{.compatible = "mediatek,mt6893-smi-larb", .data = &mtk_smi_larb_mt6893},
+	{.compatible = "mediatek,mt8167-smi-larb", .data = &mtk_smi_larb_mt8167},
+	{.compatible = "mediatek,mt8173-smi-larb", .data = &mtk_smi_larb_mt8173},
+	{.compatible = "mediatek,mt8183-smi-larb", .data = &mtk_smi_larb_mt8183},
+	{.compatible = "mediatek,mt8186-smi-larb", .data = &mtk_smi_larb_mt8186},
+	{.compatible = "mediatek,mt8188-smi-larb", .data = &mtk_smi_larb_mt8188},
+	{.compatible = "mediatek,mt8192-smi-larb", .data = &mtk_smi_larb_mt8192},
+	{.compatible = "mediatek,mt8195-smi-larb", .data = &mtk_smi_larb_mt8195},
+	{}
+};
+MODULE_DEVICE_TABLE(of, mtk_smi_larb_of_ids);
+
+static int mtk_smi_larb_sleep_ctrl_enable(struct mtk_smi_larb *larb)
+{
+	int ret;
+	u32 tmp;
+
+	writel_relaxed(SLP_PROT_EN, larb->base + SMI_LARB_SLP_CON);
+	ret = readl_poll_timeout_atomic(larb->base + SMI_LARB_SLP_CON,
+					tmp, !!(tmp & SLP_PROT_RDY), 10, 1000);
+	if (ret) {
+		/* TODO: Reset this larb if it fails here. */
+		dev_err(larb->smi.dev, "sleep ctrl is not ready(0x%x).\n", tmp);
+	}
+	return ret;
+}
+
+static void mtk_smi_larb_sleep_ctrl_disable(struct mtk_smi_larb *larb)
+{
+	writel_relaxed(0, larb->base + SMI_LARB_SLP_CON);
+}
+
+static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev)
+{
+	struct platform_device *smi_com_pdev;
+	struct device_node *smi_com_node;
+	struct device *smi_com_dev;
+	struct device_link *link;
+
+	smi_com_node = of_parse_phandle(dev->of_node, "mediatek,smi", 0);
+	if (!smi_com_node)
+		return -EINVAL;
+
+	smi_com_pdev = of_find_device_by_node(smi_com_node);
+	of_node_put(smi_com_node);
+	if (!smi_com_pdev) {
+		dev_err(dev, "Failed to get the smi_common device\n");
+		return -EINVAL;
+	}
+
+	/* smi common is the supplier, Make sure it is ready before */
+	if (!platform_get_drvdata(smi_com_pdev)) {
+		put_device(&smi_com_pdev->dev);
+		return -EPROBE_DEFER;
+	}
+
+	smi_com_dev = &smi_com_pdev->dev;
+	link = device_link_add(dev, smi_com_dev,
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+	if (!link) {
+		dev_err(dev, "Unable to link smi-common dev\n");
+		put_device(&smi_com_pdev->dev);
+		return -ENODEV;
+	}
+
+	*com_dev = smi_com_dev;
+
+	return 0;
+}
+
+static int mtk_smi_dts_clk_init(struct device *dev, struct mtk_smi *smi,
+				const char * const clks[],
+				unsigned int clk_nr_required,
+				unsigned int clk_nr_optional)
+{
+	int i, ret;
+
+	for (i = 0; i < clk_nr_required; i++)
+		smi->clks[i].id = clks[i];
+	ret = devm_clk_bulk_get(dev, clk_nr_required, smi->clks);
+	if (ret)
+		return ret;
+
+	for (i = clk_nr_required; i < clk_nr_required + clk_nr_optional; i++)
+		smi->clks[i].id = clks[i];
+	ret = devm_clk_bulk_get_optional(dev, clk_nr_optional,
+					 smi->clks + clk_nr_required);
+	smi->clk_num = clk_nr_required + clk_nr_optional;
+	return ret;
+}
+
+static int mtk_smi_larb_probe(struct platform_device *pdev)
+{
+	struct mtk_smi_larb *larb;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	larb = devm_kzalloc(dev, sizeof(*larb), GFP_KERNEL);
+	if (!larb)
+		return -ENOMEM;
+
+	larb->larb_gen = of_device_get_match_data(dev);
+	larb->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(larb->base))
+		return PTR_ERR(larb->base);
+
+	ret = mtk_smi_dts_clk_init(dev, &larb->smi, mtk_smi_larb_clks,
+				   MTK_SMI_LARB_REQ_CLK_NR, MTK_SMI_LARB_OPT_CLK_NR);
+	if (ret)
+		return ret;
+
+	larb->smi.dev = dev;
+
+	ret = mtk_smi_device_link_common(dev, &larb->smi_common_dev);
+	if (ret < 0)
+		return ret;
+
+	pm_runtime_enable(dev);
+	platform_set_drvdata(pdev, larb);
+	ret = component_add(dev, &mtk_smi_larb_component_ops);
+	if (ret)
+		goto err_pm_disable;
+	return 0;
+
+err_pm_disable:
+	pm_runtime_disable(dev);
+	device_link_remove(dev, larb->smi_common_dev);
+	put_device(larb->smi_common_dev);
+	return ret;
+}
+
+static void mtk_smi_larb_remove(struct platform_device *pdev)
+{
+	struct mtk_smi_larb *larb = platform_get_drvdata(pdev);
+
+	device_link_remove(&pdev->dev, larb->smi_common_dev);
+	pm_runtime_disable(&pdev->dev);
+	component_del(&pdev->dev, &mtk_smi_larb_component_ops);
+	put_device(larb->smi_common_dev);
+}
+
+static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
+{
+	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+	const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
+	int ret;
+
+	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
+	if (ret)
+		return ret;
+
+	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
+		mtk_smi_larb_sleep_ctrl_disable(larb);
+
+	/* Configure the basic setting for this larb */
+	return larb_gen->config_port(dev);
+}
+
+static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
+{
+	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+	int ret;
+
+	if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL)) {
+		ret = mtk_smi_larb_sleep_ctrl_enable(larb);
+		if (ret)
+			return ret;
+	}
+
+	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
+	return 0;
+}
+
+static const struct dev_pm_ops smi_larb_pm_ops = {
+	SET_RUNTIME_PM_OPS(mtk_smi_larb_suspend, mtk_smi_larb_resume, NULL)
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				     pm_runtime_force_resume)
+};
+
+static struct platform_driver mtk_smi_larb_driver = {
+	.probe	= mtk_smi_larb_probe,
+	.remove = mtk_smi_larb_remove,
+	.driver	= {
+		.name = "mtk-smi-larb",
+		.of_match_table = mtk_smi_larb_of_ids,
+		.pm             = &smi_larb_pm_ops,
+	}
+};
+
+static const struct mtk_smi_reg_pair mtk_smi_common_mt6795_init[SMI_COMMON_INIT_REGS_NR] = {
+	{SMI_L1_ARB, 0x1b},
+	{SMI_M4U_TH, 0xce810c85},
+	{SMI_FIFO_TH1, 0x43214c8},
+	{SMI_READ_FIFO_TH, 0x191f},
+};
+
+static const struct mtk_smi_reg_pair mtk_smi_common_mt8195_init[SMI_COMMON_INIT_REGS_NR] = {
+	{SMI_L1LEN, 0xb},
+	{SMI_M4U_TH, 0xe100e10},
+	{SMI_FIFO_TH1, 0x506090a},
+	{SMI_FIFO_TH2, 0x506090a},
+	{SMI_DCM, 0x4f1},
+	{SMI_DUMMY, 0x1},
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_gen1 = {
+	.type     = MTK_SMI_GEN1,
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_gen2 = {
+	.type	  = MTK_SMI_GEN2,
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt6779 = {
+	.type	  = MTK_SMI_GEN2,
+	.has_gals = true,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(4) |
+		    F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt6795 = {
+	.type	  = MTK_SMI_GEN2,
+	.bus_sel  = F_MMU1_LARB(0),
+	.init     = mtk_smi_common_mt6795_init,
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt6893 = {
+	.type     = MTK_SMI_GEN2,
+	.has_gals = true,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(4) |
+		    F_MMU1_LARB(5) | F_MMU1_LARB(7),
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
+	.type     = MTK_SMI_GEN2,
+	.has_gals = true,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(5) |
+		    F_MMU1_LARB(7),
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt8186 = {
+	.type     = MTK_SMI_GEN2,
+	.has_gals = true,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(4) | F_MMU1_LARB(7),
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt8188_vdo = {
+	.type     = MTK_SMI_GEN2,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(5) | F_MMU1_LARB(7),
+	.init     = mtk_smi_common_mt8195_init,
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt8188_vpp = {
+	.type     = MTK_SMI_GEN2,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(7),
+	.init     = mtk_smi_common_mt8195_init,
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
+	.type     = MTK_SMI_GEN2,
+	.has_gals = true,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(5) |
+		    F_MMU1_LARB(6),
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt8195_vdo = {
+	.type     = MTK_SMI_GEN2,
+	.has_gals = true,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(3) | F_MMU1_LARB(5) |
+		    F_MMU1_LARB(7),
+	.init     = mtk_smi_common_mt8195_init,
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt8195_vpp = {
+	.type     = MTK_SMI_GEN2,
+	.has_gals = true,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(7),
+	.init     = mtk_smi_common_mt8195_init,
+};
+
+static const struct mtk_smi_common_plat mtk_smi_sub_common_mt8195 = {
+	.type     = MTK_SMI_GEN2_SUB_COMM,
+	.has_gals = true,
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt8365 = {
+	.type     = MTK_SMI_GEN2,
+	.bus_sel  = F_MMU1_LARB(2) | F_MMU1_LARB(4),
+};
+
+static const struct of_device_id mtk_smi_common_of_ids[] = {
+	{.compatible = "mediatek,mt2701-smi-common", .data = &mtk_smi_common_gen1},
+	{.compatible = "mediatek,mt2712-smi-common", .data = &mtk_smi_common_gen2},
+	{.compatible = "mediatek,mt6779-smi-common", .data = &mtk_smi_common_mt6779},
+	{.compatible = "mediatek,mt6795-smi-common", .data = &mtk_smi_common_mt6795},
+	{.compatible = "mediatek,mt6893-smi-common", .data = &mtk_smi_common_mt6893},
+	{.compatible = "mediatek,mt8167-smi-common", .data = &mtk_smi_common_gen2},
+	{.compatible = "mediatek,mt8173-smi-common", .data = &mtk_smi_common_gen2},
+	{.compatible = "mediatek,mt8183-smi-common", .data = &mtk_smi_common_mt8183},
+	{.compatible = "mediatek,mt8186-smi-common", .data = &mtk_smi_common_mt8186},
+	{.compatible = "mediatek,mt8188-smi-common-vdo", .data = &mtk_smi_common_mt8188_vdo},
+	{.compatible = "mediatek,mt8188-smi-common-vpp", .data = &mtk_smi_common_mt8188_vpp},
+	{.compatible = "mediatek,mt8192-smi-common", .data = &mtk_smi_common_mt8192},
+	{.compatible = "mediatek,mt8195-smi-common-vdo", .data = &mtk_smi_common_mt8195_vdo},
+	{.compatible = "mediatek,mt8195-smi-common-vpp", .data = &mtk_smi_common_mt8195_vpp},
+	{.compatible = "mediatek,mt8195-smi-sub-common", .data = &mtk_smi_sub_common_mt8195},
+	{.compatible = "mediatek,mt8365-smi-common", .data = &mtk_smi_common_mt8365},
+	{}
+};
+MODULE_DEVICE_TABLE(of, mtk_smi_common_of_ids);
+
+static int mtk_smi_common_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mtk_smi *common;
+	int ret, clk_required = MTK_SMI_COM_REQ_CLK_NR;
+
+	common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL);
+	if (!common)
+		return -ENOMEM;
+	common->dev = dev;
+	common->plat = of_device_get_match_data(dev);
+
+	if (common->plat->has_gals) {
+		if (common->plat->type == MTK_SMI_GEN2)
+			clk_required = MTK_SMI_COM_GALS_REQ_CLK_NR;
+		else if (common->plat->type == MTK_SMI_GEN2_SUB_COMM)
+			clk_required = MTK_SMI_SUB_COM_GALS_REQ_CLK_NR;
+	}
+	ret = mtk_smi_dts_clk_init(dev, common, mtk_smi_common_clks, clk_required, 0);
+	if (ret)
+		return ret;
+
+	/*
+	 * for mtk smi gen 1, we need to get the ao(always on) base to config
+	 * m4u port, and we need to enable the aync clock for transform the smi
+	 * clock into emi clock domain, but for mtk smi gen2, there's no smi ao
+	 * base.
+	 */
+	if (common->plat->type == MTK_SMI_GEN1) {
+		common->smi_ao_base = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(common->smi_ao_base))
+			return PTR_ERR(common->smi_ao_base);
+
+		common->clk_async = devm_clk_get_enabled(dev, "async");
+		if (IS_ERR(common->clk_async))
+			return PTR_ERR(common->clk_async);
+	} else {
+		common->base = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(common->base))
+			return PTR_ERR(common->base);
+	}
+
+	/* link its smi-common if this is smi-sub-common */
+	if (common->plat->type == MTK_SMI_GEN2_SUB_COMM) {
+		ret = mtk_smi_device_link_common(dev, &common->smi_common_dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	pm_runtime_enable(dev);
+	platform_set_drvdata(pdev, common);
+	return 0;
+}
+
+static void mtk_smi_common_remove(struct platform_device *pdev)
+{
+	struct mtk_smi *common = dev_get_drvdata(&pdev->dev);
+
+	if (common->plat->type == MTK_SMI_GEN2_SUB_COMM)
+		device_link_remove(&pdev->dev, common->smi_common_dev);
+	pm_runtime_disable(&pdev->dev);
+	put_device(common->smi_common_dev);
+}
+
+static int __maybe_unused mtk_smi_common_resume(struct device *dev)
+{
+	struct mtk_smi *common = dev_get_drvdata(dev);
+	const struct mtk_smi_reg_pair *init = common->plat->init;
+	u32 bus_sel = common->plat->bus_sel; /* default is 0 */
+	int ret, i;
+
+	ret = clk_bulk_prepare_enable(common->clk_num, common->clks);
+	if (ret)
+		return ret;
+
+	if (common->plat->type != MTK_SMI_GEN2)
+		return 0;
+
+	for (i = 0; i < SMI_COMMON_INIT_REGS_NR && init && init[i].offset; i++)
+		writel_relaxed(init[i].value, common->base + init[i].offset);
+
+	writel(bus_sel, common->base + SMI_BUS_SEL);
+	return 0;
+}
+
+static int __maybe_unused mtk_smi_common_suspend(struct device *dev)
+{
+	struct mtk_smi *common = dev_get_drvdata(dev);
+
+	clk_bulk_disable_unprepare(common->clk_num, common->clks);
+	return 0;
+}
+
+static const struct dev_pm_ops smi_common_pm_ops = {
+	SET_RUNTIME_PM_OPS(mtk_smi_common_suspend, mtk_smi_common_resume, NULL)
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				     pm_runtime_force_resume)
+};
+
+static struct platform_driver mtk_smi_common_driver = {
+	.probe	= mtk_smi_common_probe,
+	.remove = mtk_smi_common_remove,
+	.driver	= {
+		.name = "mtk-smi-common",
+		.of_match_table = mtk_smi_common_of_ids,
+		.pm             = &smi_common_pm_ops,
+	}
+};
+
+static struct platform_driver * const smidrivers[] = {
+	&mtk_smi_common_driver,
+	&mtk_smi_larb_driver,
+};
+
+static int __init mtk_smi_init(void)
+{
+	return platform_register_drivers(smidrivers, ARRAY_SIZE(smidrivers));
+}
+module_init(mtk_smi_init);
+
+static void __exit mtk_smi_exit(void)
+{
+	platform_unregister_drivers(smidrivers, ARRAY_SIZE(smidrivers));
+}
+module_exit(mtk_smi_exit);
+
+MODULE_DESCRIPTION("MediaTek SMI driver");
+MODULE_LICENSE("GPL v2");

linux-7.2.3/drivers/memory/mvebu-devbus.c

@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Marvell EBU SoC Device Bus Controller
+ * (memory controller for NOR/NAND/SRAM/FPGA devices)
+ *
+ * Copyright (C) 2013-2014 Marvell
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/mbus.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+/* Register definitions */
+#define ARMADA_DEV_WIDTH_SHIFT		30
+#define ARMADA_BADR_SKEW_SHIFT		28
+#define ARMADA_RD_HOLD_SHIFT		23
+#define ARMADA_ACC_NEXT_SHIFT		17
+#define ARMADA_RD_SETUP_SHIFT		12
+#define ARMADA_ACC_FIRST_SHIFT		6
+
+#define ARMADA_SYNC_ENABLE_SHIFT	24
+#define ARMADA_WR_HIGH_SHIFT		16
+#define ARMADA_WR_LOW_SHIFT		8
+
+#define ARMADA_READ_PARAM_OFFSET	0x0
+#define ARMADA_WRITE_PARAM_OFFSET	0x4
+
+#define ORION_RESERVED			(0x2 << 30)
+#define ORION_BADR_SKEW_SHIFT		28
+#define ORION_WR_HIGH_EXT_BIT		BIT(27)
+#define ORION_WR_HIGH_EXT_MASK		0x8
+#define ORION_WR_LOW_EXT_BIT		BIT(26)
+#define ORION_WR_LOW_EXT_MASK		0x8
+#define ORION_ALE_WR_EXT_BIT		BIT(25)
+#define ORION_ALE_WR_EXT_MASK		0x8
+#define ORION_ACC_NEXT_EXT_BIT		BIT(24)
+#define ORION_ACC_NEXT_EXT_MASK		0x10
+#define ORION_ACC_FIRST_EXT_BIT		BIT(23)
+#define ORION_ACC_FIRST_EXT_MASK	0x10
+#define ORION_TURN_OFF_EXT_BIT		BIT(22)
+#define ORION_TURN_OFF_EXT_MASK		0x8
+#define ORION_DEV_WIDTH_SHIFT		20
+#define ORION_WR_HIGH_SHIFT		17
+#define ORION_WR_HIGH_MASK		0x7
+#define ORION_WR_LOW_SHIFT		14
+#define ORION_WR_LOW_MASK		0x7
+#define ORION_ALE_WR_SHIFT		11
+#define ORION_ALE_WR_MASK		0x7
+#define ORION_ACC_NEXT_SHIFT		7
+#define ORION_ACC_NEXT_MASK		0xF
+#define ORION_ACC_FIRST_SHIFT		3
+#define ORION_ACC_FIRST_MASK		0xF
+#define ORION_TURN_OFF_SHIFT		0
+#define ORION_TURN_OFF_MASK		0x7
+
+struct devbus_read_params {
+	u32 bus_width;
+	u32 badr_skew;
+	u32 turn_off;
+	u32 acc_first;
+	u32 acc_next;
+	u32 rd_setup;
+	u32 rd_hold;
+};
+
+struct devbus_write_params {
+	u32 sync_enable;
+	u32 wr_high;
+	u32 wr_low;
+	u32 ale_wr;
+};
+
+struct devbus {
+	struct device *dev;
+	void __iomem *base;
+	unsigned long tick_ps;
+};
+
+static int get_timing_param_ps(struct devbus *devbus,
+			       struct device_node *node,
+			       const char *name,
+			       u32 *ticks)
+{
+	u32 time_ps;
+	int err;
+
+	err = of_property_read_u32(node, name, &time_ps);
+	if (err < 0) {
+		dev_err(devbus->dev, "%pOF has no '%s' property\n",
+			node, name);
+		return err;
+	}
+
+	*ticks = (time_ps + devbus->tick_ps - 1) / devbus->tick_ps;
+
+	dev_dbg(devbus->dev, "%s: %u ps -> 0x%x\n",
+		name, time_ps, *ticks);
+	return 0;
+}
+
+static int devbus_get_timing_params(struct devbus *devbus,
+				    struct device_node *node,
+				    struct devbus_read_params *r,
+				    struct devbus_write_params *w)
+{
+	int err;
+
+	err = of_property_read_u32(node, "devbus,bus-width", &r->bus_width);
+	if (err < 0) {
+		dev_err(devbus->dev,
+			"%pOF has no 'devbus,bus-width' property\n",
+			node);
+		return err;
+	}
+
+	/*
+	 * The bus width is encoded into the register as 0 for 8 bits,
+	 * and 1 for 16 bits, so we do the necessary conversion here.
+	 */
+	if (r->bus_width == 8) {
+		r->bus_width = 0;
+	} else if (r->bus_width == 16) {
+		r->bus_width = 1;
+	} else {
+		dev_err(devbus->dev, "invalid bus width %d\n", r->bus_width);
+		return -EINVAL;
+	}
+
+	err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps",
+				  &r->badr_skew);
+	if (err < 0)
+		return err;
+
+	err = get_timing_param_ps(devbus, node, "devbus,turn-off-ps",
+				  &r->turn_off);
+	if (err < 0)
+		return err;
+
+	err = get_timing_param_ps(devbus, node, "devbus,acc-first-ps",
+				  &r->acc_first);
+	if (err < 0)
+		return err;
+
+	err = get_timing_param_ps(devbus, node, "devbus,acc-next-ps",
+				  &r->acc_next);
+	if (err < 0)
+		return err;
+
+	if (of_device_is_compatible(devbus->dev->of_node, "marvell,mvebu-devbus")) {
+		err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps",
+					  &r->rd_setup);
+		if (err < 0)
+			return err;
+
+		err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps",
+					  &r->rd_hold);
+		if (err < 0)
+			return err;
+
+		err = of_property_read_u32(node, "devbus,sync-enable",
+					   &w->sync_enable);
+		if (err < 0) {
+			dev_err(devbus->dev,
+				"%pOF has no 'devbus,sync-enable' property\n",
+				node);
+			return err;
+		}
+	}
+
+	err = get_timing_param_ps(devbus, node, "devbus,ale-wr-ps",
+				  &w->ale_wr);
+	if (err < 0)
+		return err;
+
+	err = get_timing_param_ps(devbus, node, "devbus,wr-low-ps",
+				  &w->wr_low);
+	if (err < 0)
+		return err;
+
+	err = get_timing_param_ps(devbus, node, "devbus,wr-high-ps",
+				  &w->wr_high);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static void devbus_orion_set_timing_params(struct devbus *devbus,
+					  struct device_node *node,
+					  struct devbus_read_params *r,
+					  struct devbus_write_params *w)
+{
+	u32 value;
+
+	/*
+	 * The hardware designers found it would be a good idea to
+	 * split most of the values in the register into two fields:
+	 * one containing all the low-order bits, and another one
+	 * containing just the high-order bit. For all of those
+	 * fields, we have to split the value into these two parts.
+	 */
+	value =	(r->turn_off   & ORION_TURN_OFF_MASK)  << ORION_TURN_OFF_SHIFT  |
+		(r->acc_first  & ORION_ACC_FIRST_MASK) << ORION_ACC_FIRST_SHIFT |
+		(r->acc_next   & ORION_ACC_NEXT_MASK)  << ORION_ACC_NEXT_SHIFT  |
+		(w->ale_wr     & ORION_ALE_WR_MASK)    << ORION_ALE_WR_SHIFT    |
+		(w->wr_low     & ORION_WR_LOW_MASK)    << ORION_WR_LOW_SHIFT    |
+		(w->wr_high    & ORION_WR_HIGH_MASK)   << ORION_WR_HIGH_SHIFT   |
+		r->bus_width                           << ORION_DEV_WIDTH_SHIFT |
+		((r->turn_off  & ORION_TURN_OFF_EXT_MASK)  ? ORION_TURN_OFF_EXT_BIT  : 0) |
+		((r->acc_first & ORION_ACC_FIRST_EXT_MASK) ? ORION_ACC_FIRST_EXT_BIT : 0) |
+		((r->acc_next  & ORION_ACC_NEXT_EXT_MASK)  ? ORION_ACC_NEXT_EXT_BIT  : 0) |
+		((w->ale_wr    & ORION_ALE_WR_EXT_MASK)    ? ORION_ALE_WR_EXT_BIT    : 0) |
+		((w->wr_low    & ORION_WR_LOW_EXT_MASK)    ? ORION_WR_LOW_EXT_BIT    : 0) |
+		((w->wr_high   & ORION_WR_HIGH_EXT_MASK)   ? ORION_WR_HIGH_EXT_BIT   : 0) |
+		(r->badr_skew << ORION_BADR_SKEW_SHIFT) |
+		ORION_RESERVED;
+
+	writel(value, devbus->base);
+}
+
+static void devbus_armada_set_timing_params(struct devbus *devbus,
+					   struct device_node *node,
+					   struct devbus_read_params *r,
+					   struct devbus_write_params *w)
+{
+	u32 value;
+
+	/* Set read timings */
+	value = r->bus_width << ARMADA_DEV_WIDTH_SHIFT |
+		r->badr_skew << ARMADA_BADR_SKEW_SHIFT |
+		r->rd_hold   << ARMADA_RD_HOLD_SHIFT   |
+		r->acc_next  << ARMADA_ACC_NEXT_SHIFT  |
+		r->rd_setup  << ARMADA_RD_SETUP_SHIFT  |
+		r->acc_first << ARMADA_ACC_FIRST_SHIFT |
+		r->turn_off;
+
+	dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n",
+		devbus->base + ARMADA_READ_PARAM_OFFSET,
+		value);
+
+	writel(value, devbus->base + ARMADA_READ_PARAM_OFFSET);
+
+	/* Set write timings */
+	value = w->sync_enable  << ARMADA_SYNC_ENABLE_SHIFT |
+		w->wr_low       << ARMADA_WR_LOW_SHIFT      |
+		w->wr_high      << ARMADA_WR_HIGH_SHIFT     |
+		w->ale_wr;
+
+	dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n",
+		devbus->base + ARMADA_WRITE_PARAM_OFFSET,
+		value);
+
+	writel(value, devbus->base + ARMADA_WRITE_PARAM_OFFSET);
+}
+
+static int mvebu_devbus_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = pdev->dev.of_node;
+	struct devbus_read_params r;
+	struct devbus_write_params w;
+	struct devbus *devbus;
+	struct clk *clk;
+	unsigned long rate;
+	int err;
+
+	devbus = devm_kzalloc(&pdev->dev, sizeof(struct devbus), GFP_KERNEL);
+	if (!devbus)
+		return -ENOMEM;
+
+	devbus->dev = dev;
+	devbus->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(devbus->base))
+		return PTR_ERR(devbus->base);
+
+	clk = devm_clk_get_enabled(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	/*
+	 * Obtain clock period in picoseconds,
+	 * we need this in order to convert timing
+	 * parameters from cycles to picoseconds.
+	 */
+	rate = clk_get_rate(clk) / 1000;
+	devbus->tick_ps = 1000000000 / rate;
+
+	dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n",
+		devbus->tick_ps);
+
+	if (!of_property_read_bool(node, "devbus,keep-config")) {
+		/* Read the Device Tree node */
+		err = devbus_get_timing_params(devbus, node, &r, &w);
+		if (err < 0)
+			return err;
+
+		/* Set the new timing parameters */
+		if (of_device_is_compatible(node, "marvell,orion-devbus"))
+			devbus_orion_set_timing_params(devbus, node, &r, &w);
+		else
+			devbus_armada_set_timing_params(devbus, node, &r, &w);
+	}
+
+	/*
+	 * We need to create a child device explicitly from here to
+	 * guarantee that the child will be probed after the timing
+	 * parameters for the bus are written.
+	 */
+	err = of_platform_populate(node, NULL, NULL, dev);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static const struct of_device_id mvebu_devbus_of_match[] = {
+	{ .compatible = "marvell,mvebu-devbus" },
+	{ .compatible = "marvell,orion-devbus" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mvebu_devbus_of_match);
+
+static struct platform_driver mvebu_devbus_driver = {
+	.probe		= mvebu_devbus_probe,
+	.driver		= {
+		.name	= "mvebu-devbus",
+		.of_match_table = mvebu_devbus_of_match,
+	},
+};
+
+static int __init mvebu_devbus_init(void)
+{
+	return platform_driver_register(&mvebu_devbus_driver);
+}
+module_init(mvebu_devbus_init);
+
+MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell EBU SoC Device Bus controller");

linux-7.2.3/drivers/memory/of_memory.c

@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenFirmware helpers for memory drivers
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Copyright (C) 2019 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/gfp.h>
+#include <linux/export.h>
+
+#include "jedec_ddr.h"
+#include "of_memory.h"
+
+/**
+ * of_get_min_tck() - extract min timing values for ddr
+ * @np: pointer to ddr device tree node
+ * @dev: device requesting for min timing values
+ *
+ * Populates the lpddr2_min_tck structure by extracting data
+ * from device tree node. Returns a pointer to the populated
+ * structure. If any error in populating the structure, returns
+ * default min timings provided by JEDEC.
+ */
+const struct lpddr2_min_tck *of_get_min_tck(struct device_node *np,
+					    struct device *dev)
+{
+	int			ret = 0;
+	struct lpddr2_min_tck	*min;
+
+	min = devm_kzalloc(dev, sizeof(*min), GFP_KERNEL);
+	if (!min)
+		goto default_min_tck;
+
+	ret |= of_property_read_u32(np, "tRPab-min-tck", &min->tRPab);
+	ret |= of_property_read_u32(np, "tRCD-min-tck", &min->tRCD);
+	ret |= of_property_read_u32(np, "tWR-min-tck", &min->tWR);
+	ret |= of_property_read_u32(np, "tRASmin-min-tck", &min->tRASmin);
+	ret |= of_property_read_u32(np, "tRRD-min-tck", &min->tRRD);
+	ret |= of_property_read_u32(np, "tWTR-min-tck", &min->tWTR);
+	ret |= of_property_read_u32(np, "tXP-min-tck", &min->tXP);
+	ret |= of_property_read_u32(np, "tRTP-min-tck", &min->tRTP);
+	ret |= of_property_read_u32(np, "tCKE-min-tck", &min->tCKE);
+	ret |= of_property_read_u32(np, "tCKESR-min-tck", &min->tCKESR);
+	ret |= of_property_read_u32(np, "tFAW-min-tck", &min->tFAW);
+
+	if (ret) {
+		devm_kfree(dev, min);
+		goto default_min_tck;
+	}
+
+	return min;
+
+default_min_tck:
+	dev_warn(dev, "Using default min-tck values\n");
+	return &lpddr2_jedec_min_tck;
+}
+EXPORT_SYMBOL(of_get_min_tck);
+
+static int of_do_get_timings(struct device_node *np,
+			     struct lpddr2_timings *tim)
+{
+	int ret;
+
+	ret = of_property_read_u32(np, "max-freq", &tim->max_freq);
+	ret |= of_property_read_u32(np, "min-freq", &tim->min_freq);
+	ret |= of_property_read_u32(np, "tRPab", &tim->tRPab);
+	ret |= of_property_read_u32(np, "tRCD", &tim->tRCD);
+	ret |= of_property_read_u32(np, "tWR", &tim->tWR);
+	ret |= of_property_read_u32(np, "tRAS-min", &tim->tRAS_min);
+	ret |= of_property_read_u32(np, "tRRD", &tim->tRRD);
+	ret |= of_property_read_u32(np, "tWTR", &tim->tWTR);
+	ret |= of_property_read_u32(np, "tXP", &tim->tXP);
+	ret |= of_property_read_u32(np, "tRTP", &tim->tRTP);
+	ret |= of_property_read_u32(np, "tCKESR", &tim->tCKESR);
+	ret |= of_property_read_u32(np, "tDQSCK-max", &tim->tDQSCK_max);
+	ret |= of_property_read_u32(np, "tFAW", &tim->tFAW);
+	ret |= of_property_read_u32(np, "tZQCS", &tim->tZQCS);
+	ret |= of_property_read_u32(np, "tZQCL", &tim->tZQCL);
+	ret |= of_property_read_u32(np, "tZQinit", &tim->tZQinit);
+	ret |= of_property_read_u32(np, "tRAS-max-ns", &tim->tRAS_max_ns);
+	ret |= of_property_read_u32(np, "tDQSCK-max-derated",
+				    &tim->tDQSCK_max_derated);
+
+	return ret;
+}
+
+/**
+ * of_get_ddr_timings() - extracts the ddr timings and updates no of
+ * frequencies available.
+ * @np_ddr: Pointer to ddr device tree node
+ * @dev: Device requesting for ddr timings
+ * @device_type: Type of ddr(LPDDR2 S2/S4)
+ * @nr_frequencies: No of frequencies available for ddr
+ * (updated by this function)
+ *
+ * Populates lpddr2_timings structure by extracting data from device
+ * tree node. Returns pointer to populated structure. If any error
+ * while populating, returns default timings provided by JEDEC.
+ */
+const struct lpddr2_timings *of_get_ddr_timings(struct device_node *np_ddr,
+						struct device *dev,
+						u32 device_type,
+						u32 *nr_frequencies)
+{
+	struct lpddr2_timings	*timings = NULL;
+	u32			arr_sz = 0, i = 0;
+	struct device_node	*np_tim;
+	char			*tim_compat = NULL;
+
+	switch (device_type) {
+	case DDR_TYPE_LPDDR2_S2:
+	case DDR_TYPE_LPDDR2_S4:
+		tim_compat = "jedec,lpddr2-timings";
+		break;
+	default:
+		dev_warn(dev, "Unsupported memory type\n");
+	}
+
+	for_each_child_of_node(np_ddr, np_tim)
+		if (of_device_is_compatible(np_tim, tim_compat))
+			arr_sz++;
+
+	if (arr_sz)
+		timings = devm_kcalloc(dev, arr_sz, sizeof(*timings),
+				       GFP_KERNEL);
+
+	if (!timings)
+		goto default_timings;
+
+	for_each_child_of_node(np_ddr, np_tim) {
+		if (of_device_is_compatible(np_tim, tim_compat)) {
+			if (of_do_get_timings(np_tim, &timings[i])) {
+				of_node_put(np_tim);
+				devm_kfree(dev, timings);
+				goto default_timings;
+			}
+			i++;
+		}
+	}
+
+	*nr_frequencies = arr_sz;
+
+	return timings;
+
+default_timings:
+	dev_warn(dev, "Using default memory timings\n");
+	*nr_frequencies = ARRAY_SIZE(lpddr2_jedec_timings);
+	return lpddr2_jedec_timings;
+}
+EXPORT_SYMBOL(of_get_ddr_timings);
+
+/**
+ * of_lpddr3_get_min_tck() - extract min timing values for lpddr3
+ * @np: pointer to ddr device tree node
+ * @dev: device requesting for min timing values
+ *
+ * Populates the lpddr3_min_tck structure by extracting data
+ * from device tree node. Returns a pointer to the populated
+ * structure. If any error in populating the structure, returns NULL.
+ */
+const struct lpddr3_min_tck *of_lpddr3_get_min_tck(struct device_node *np,
+						   struct device *dev)
+{
+	int			ret = 0;
+	struct lpddr3_min_tck	*min;
+
+	min = devm_kzalloc(dev, sizeof(*min), GFP_KERNEL);
+	if (!min)
+		goto default_min_tck;
+
+	ret |= of_property_read_u32(np, "tRFC-min-tck", &min->tRFC);
+	ret |= of_property_read_u32(np, "tRRD-min-tck", &min->tRRD);
+	ret |= of_property_read_u32(np, "tRPab-min-tck", &min->tRPab);
+	ret |= of_property_read_u32(np, "tRPpb-min-tck", &min->tRPpb);
+	ret |= of_property_read_u32(np, "tRCD-min-tck", &min->tRCD);
+	ret |= of_property_read_u32(np, "tRC-min-tck", &min->tRC);
+	ret |= of_property_read_u32(np, "tRAS-min-tck", &min->tRAS);
+	ret |= of_property_read_u32(np, "tWTR-min-tck", &min->tWTR);
+	ret |= of_property_read_u32(np, "tWR-min-tck", &min->tWR);
+	ret |= of_property_read_u32(np, "tRTP-min-tck", &min->tRTP);
+	ret |= of_property_read_u32(np, "tW2W-C2C-min-tck", &min->tW2W_C2C);
+	ret |= of_property_read_u32(np, "tR2R-C2C-min-tck", &min->tR2R_C2C);
+	ret |= of_property_read_u32(np, "tWL-min-tck", &min->tWL);
+	ret |= of_property_read_u32(np, "tDQSCK-min-tck", &min->tDQSCK);
+	ret |= of_property_read_u32(np, "tRL-min-tck", &min->tRL);
+	ret |= of_property_read_u32(np, "tFAW-min-tck", &min->tFAW);
+	ret |= of_property_read_u32(np, "tXSR-min-tck", &min->tXSR);
+	ret |= of_property_read_u32(np, "tXP-min-tck", &min->tXP);
+	ret |= of_property_read_u32(np, "tCKE-min-tck", &min->tCKE);
+	ret |= of_property_read_u32(np, "tCKESR-min-tck", &min->tCKESR);
+	ret |= of_property_read_u32(np, "tMRD-min-tck", &min->tMRD);
+
+	if (ret) {
+		dev_warn(dev, "Errors while parsing min-tck values\n");
+		devm_kfree(dev, min);
+		goto default_min_tck;
+	}
+
+	return min;
+
+default_min_tck:
+	dev_warn(dev, "Using default min-tck values\n");
+	return NULL;
+}
+EXPORT_SYMBOL(of_lpddr3_get_min_tck);
+
+static int of_lpddr3_do_get_timings(struct device_node *np,
+				    struct lpddr3_timings *tim)
+{
+	int ret;
+
+	ret = of_property_read_u32(np, "max-freq", &tim->max_freq);
+	if (ret)
+		/* Deprecated way of passing max-freq as 'reg' */
+		ret = of_property_read_u32(np, "reg", &tim->max_freq);
+	ret |= of_property_read_u32(np, "min-freq", &tim->min_freq);
+	ret |= of_property_read_u32(np, "tRFC", &tim->tRFC);
+	ret |= of_property_read_u32(np, "tRRD", &tim->tRRD);
+	ret |= of_property_read_u32(np, "tRPab", &tim->tRPab);
+	ret |= of_property_read_u32(np, "tRPpb", &tim->tRPpb);
+	ret |= of_property_read_u32(np, "tRCD", &tim->tRCD);
+	ret |= of_property_read_u32(np, "tRC", &tim->tRC);
+	ret |= of_property_read_u32(np, "tRAS", &tim->tRAS);
+	ret |= of_property_read_u32(np, "tWTR", &tim->tWTR);
+	ret |= of_property_read_u32(np, "tWR", &tim->tWR);
+	ret |= of_property_read_u32(np, "tRTP", &tim->tRTP);
+	ret |= of_property_read_u32(np, "tW2W-C2C", &tim->tW2W_C2C);
+	ret |= of_property_read_u32(np, "tR2R-C2C", &tim->tR2R_C2C);
+	ret |= of_property_read_u32(np, "tFAW", &tim->tFAW);
+	ret |= of_property_read_u32(np, "tXSR", &tim->tXSR);
+	ret |= of_property_read_u32(np, "tXP", &tim->tXP);
+	ret |= of_property_read_u32(np, "tCKE", &tim->tCKE);
+	ret |= of_property_read_u32(np, "tCKESR", &tim->tCKESR);
+	ret |= of_property_read_u32(np, "tMRD", &tim->tMRD);
+
+	return ret;
+}
+
+/**
+ * of_lpddr3_get_ddr_timings() - extracts the lpddr3 timings and updates no of
+ * frequencies available.
+ * @np_ddr: Pointer to ddr device tree node
+ * @dev: Device requesting for ddr timings
+ * @device_type: Type of ddr
+ * @nr_frequencies: No of frequencies available for ddr
+ * (updated by this function)
+ *
+ * Populates lpddr3_timings structure by extracting data from device
+ * tree node. Returns pointer to populated structure. If any error
+ * while populating, returns NULL.
+ */
+const struct lpddr3_timings
+*of_lpddr3_get_ddr_timings(struct device_node *np_ddr, struct device *dev,
+			   u32 device_type, u32 *nr_frequencies)
+{
+	struct lpddr3_timings	*timings = NULL;
+	u32			arr_sz = 0, i = 0;
+	struct device_node	*np_tim;
+	char			*tim_compat = NULL;
+
+	switch (device_type) {
+	case DDR_TYPE_LPDDR3:
+		tim_compat = "jedec,lpddr3-timings";
+		break;
+	default:
+		dev_warn(dev, "Unsupported memory type\n");
+	}
+
+	for_each_child_of_node(np_ddr, np_tim)
+		if (of_device_is_compatible(np_tim, tim_compat))
+			arr_sz++;
+
+	if (arr_sz)
+		timings = devm_kcalloc(dev, arr_sz, sizeof(*timings),
+				       GFP_KERNEL);
+
+	if (!timings)
+		goto default_timings;
+
+	for_each_child_of_node(np_ddr, np_tim) {
+		if (of_device_is_compatible(np_tim, tim_compat)) {
+			if (of_lpddr3_do_get_timings(np_tim, &timings[i])) {
+				devm_kfree(dev, timings);
+				of_node_put(np_tim);
+				goto default_timings;
+			}
+			i++;
+		}
+	}
+
+	*nr_frequencies = arr_sz;
+
+	return timings;
+
+default_timings:
+	dev_warn(dev, "Failed to get timings\n");
+	*nr_frequencies = 0;
+	return NULL;
+}
+EXPORT_SYMBOL(of_lpddr3_get_ddr_timings);
+
+/**
+ * of_lpddr2_get_info() - extracts information about the lpddr2 chip.
+ * @np: Pointer to device tree node containing lpddr2 info
+ * @dev: Device requesting info
+ *
+ * Populates lpddr2_info structure by extracting data from device
+ * tree node. Returns pointer to populated structure. If error
+ * happened while populating, returns NULL. If property is missing
+ * in a device-tree, then the corresponding value is set to -ENOENT.
+ */
+const struct lpddr2_info
+*of_lpddr2_get_info(struct device_node *np, struct device *dev)
+{
+	struct lpddr2_info *ret_info, info = {};
+	struct property *prop;
+	const char *cp;
+	int err;
+	u32 revision_id[2];
+
+	err = of_property_read_u32_array(np, "revision-id", revision_id, 2);
+	if (!err) {
+		info.revision_id1 = revision_id[0];
+		info.revision_id2 = revision_id[1];
+	} else {
+		err = of_property_read_u32(np, "revision-id1", &info.revision_id1);
+		if (err)
+			info.revision_id1 = -ENOENT;
+
+		err = of_property_read_u32(np, "revision-id2", &info.revision_id2);
+		if (err)
+			info.revision_id2 = -ENOENT;
+	}
+
+	err = of_property_read_u32(np, "io-width", &info.io_width);
+	if (err)
+		return NULL;
+
+	info.io_width = 32 / info.io_width - 1;
+
+	err = of_property_read_u32(np, "density", &info.density);
+	if (err)
+		return NULL;
+
+	info.density = ffs(info.density) - 7;
+
+	if (of_device_is_compatible(np, "jedec,lpddr2-s4"))
+		info.arch_type = LPDDR2_TYPE_S4;
+	else if (of_device_is_compatible(np, "jedec,lpddr2-s2"))
+		info.arch_type = LPDDR2_TYPE_S2;
+	else if (of_device_is_compatible(np, "jedec,lpddr2-nvm"))
+		info.arch_type = LPDDR2_TYPE_NVM;
+	else
+		return NULL;
+
+	prop = of_find_property(np, "compatible", NULL);
+	for (cp = of_prop_next_string(prop, NULL); cp;
+	     cp = of_prop_next_string(prop, cp)) {
+
+#define OF_LPDDR2_VENDOR_CMP(compat, ID) \
+		if (!of_compat_cmp(cp, compat ",", strlen(compat ","))) { \
+			info.manufacturer_id = LPDDR2_MANID_##ID; \
+			break; \
+		}
+
+		OF_LPDDR2_VENDOR_CMP("samsung", SAMSUNG)
+		OF_LPDDR2_VENDOR_CMP("qimonda", QIMONDA)
+		OF_LPDDR2_VENDOR_CMP("elpida", ELPIDA)
+		OF_LPDDR2_VENDOR_CMP("etron", ETRON)
+		OF_LPDDR2_VENDOR_CMP("nanya", NANYA)
+		OF_LPDDR2_VENDOR_CMP("hynix", HYNIX)
+		OF_LPDDR2_VENDOR_CMP("mosel", MOSEL)
+		OF_LPDDR2_VENDOR_CMP("winbond", WINBOND)
+		OF_LPDDR2_VENDOR_CMP("esmt", ESMT)
+		OF_LPDDR2_VENDOR_CMP("spansion", SPANSION)
+		OF_LPDDR2_VENDOR_CMP("sst", SST)
+		OF_LPDDR2_VENDOR_CMP("zmos", ZMOS)
+		OF_LPDDR2_VENDOR_CMP("intel", INTEL)
+		OF_LPDDR2_VENDOR_CMP("numonyx", NUMONYX)
+		OF_LPDDR2_VENDOR_CMP("micron", MICRON)
+
+#undef OF_LPDDR2_VENDOR_CMP
+	}
+
+	if (!info.manufacturer_id)
+		info.manufacturer_id = -ENOENT;
+
+	ret_info = devm_kzalloc(dev, sizeof(*ret_info), GFP_KERNEL);
+	if (ret_info)
+		*ret_info = info;
+
+	return ret_info;
+}
+EXPORT_SYMBOL(of_lpddr2_get_info);

linux-7.2.3/drivers/memory/of_memory.h

@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OpenFirmware helpers for memory drivers
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __LINUX_MEMORY_OF_REG_H
+#define __LINUX_MEMORY_OF_REG_H
+
+#if defined(CONFIG_OF) && defined(CONFIG_DDR)
+const struct lpddr2_min_tck *of_get_min_tck(struct device_node *np,
+					    struct device *dev);
+const struct lpddr2_timings *of_get_ddr_timings(struct device_node *np_ddr,
+						struct device *dev,
+						u32 device_type, u32 *nr_frequencies);
+const struct lpddr3_min_tck *of_lpddr3_get_min_tck(struct device_node *np,
+						   struct device *dev);
+const struct lpddr3_timings *
+of_lpddr3_get_ddr_timings(struct device_node *np_ddr,
+			  struct device *dev, u32 device_type, u32 *nr_frequencies);
+
+const struct lpddr2_info *of_lpddr2_get_info(struct device_node *np,
+					     struct device *dev);
+#else
+static inline const struct lpddr2_min_tck
+	*of_get_min_tck(struct device_node *np, struct device *dev)
+{
+	return NULL;
+}
+
+static inline const struct lpddr2_timings
+	*of_get_ddr_timings(struct device_node *np_ddr, struct device *dev,
+	u32 device_type, u32 *nr_frequencies)
+{
+	return NULL;
+}
+
+static inline const struct lpddr3_min_tck
+	*of_lpddr3_get_min_tck(struct device_node *np, struct device *dev)
+{
+	return NULL;
+}
+
+static inline const struct lpddr3_timings
+	*of_lpddr3_get_ddr_timings(struct device_node *np_ddr,
+	struct device *dev, u32 device_type, u32 *nr_frequencies)
+{
+	return NULL;
+}
+
+static inline const struct lpddr2_info
+	*of_lpddr2_get_info(struct device_node *np, struct device *dev)
+{
+	return NULL;
+}
+#endif /* CONFIG_OF && CONFIG_DDR */
+
+#endif /* __LINUX_MEMORY_OF_REG_ */

linux-7.2.3/drivers/memory/pl172.c

@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Memory controller driver for ARM PrimeCell PL172
+ * PrimeCell MultiPort Memory Controller (PL172)
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on:
+ * TI AEMIF driver, Copyright (C) 2010 - 2013 Texas Instruments Inc.
+ */
+
+#include <linux/amba/bus.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/time.h>
+
+#define MPMC_STATIC_CFG(n)		(0x200 + 0x20 * (n))
+#define  MPMC_STATIC_CFG_MW_8BIT	0x0
+#define  MPMC_STATIC_CFG_MW_16BIT	0x1
+#define  MPMC_STATIC_CFG_MW_32BIT	0x2
+#define  MPMC_STATIC_CFG_PM		BIT(3)
+#define  MPMC_STATIC_CFG_PC		BIT(6)
+#define  MPMC_STATIC_CFG_PB		BIT(7)
+#define  MPMC_STATIC_CFG_EW		BIT(8)
+#define  MPMC_STATIC_CFG_B		BIT(19)
+#define  MPMC_STATIC_CFG_P		BIT(20)
+#define MPMC_STATIC_WAIT_WEN(n)		(0x204 + 0x20 * (n))
+#define  MPMC_STATIC_WAIT_WEN_MAX	0x0f
+#define MPMC_STATIC_WAIT_OEN(n)		(0x208 + 0x20 * (n))
+#define  MPMC_STATIC_WAIT_OEN_MAX	0x0f
+#define MPMC_STATIC_WAIT_RD(n)		(0x20c + 0x20 * (n))
+#define  MPMC_STATIC_WAIT_RD_MAX	0x1f
+#define MPMC_STATIC_WAIT_PAGE(n)	(0x210 + 0x20 * (n))
+#define  MPMC_STATIC_WAIT_PAGE_MAX	0x1f
+#define MPMC_STATIC_WAIT_WR(n)		(0x214 + 0x20 * (n))
+#define  MPMC_STATIC_WAIT_WR_MAX	0x1f
+#define MPMC_STATIC_WAIT_TURN(n)	(0x218 + 0x20 * (n))
+#define  MPMC_STATIC_WAIT_TURN_MAX	0x0f
+
+/* Maximum number of static chip selects */
+#define PL172_MAX_CS		4
+
+struct pl172_data {
+	void __iomem *base;
+	unsigned long rate;
+	struct clk *clk;
+};
+
+static int pl172_timing_prop(struct amba_device *adev,
+			     const struct device_node *np, const char *name,
+			     u32 reg_offset, u32 max, int start)
+{
+	struct pl172_data *pl172 = amba_get_drvdata(adev);
+	int cycles;
+	u32 val;
+
+	if (!of_property_read_u32(np, name, &val)) {
+		cycles = DIV_ROUND_UP(val * pl172->rate, NSEC_PER_MSEC) - start;
+		if (cycles < 0) {
+			cycles = 0;
+		} else if (cycles > max) {
+			dev_err(&adev->dev, "%s timing too tight\n", name);
+			return -EINVAL;
+		}
+
+		writel(cycles, pl172->base + reg_offset);
+	}
+
+	dev_dbg(&adev->dev, "%s: %u cycle(s)\n", name, start +
+				readl(pl172->base + reg_offset));
+
+	return 0;
+}
+
+static int pl172_setup_static(struct amba_device *adev,
+			      struct device_node *np, u32 cs)
+{
+	struct pl172_data *pl172 = amba_get_drvdata(adev);
+	u32 cfg;
+	int ret;
+
+	/* MPMC static memory configuration */
+	if (!of_property_read_u32(np, "mpmc,memory-width", &cfg)) {
+		if (cfg == 8) {
+			cfg = MPMC_STATIC_CFG_MW_8BIT;
+		} else if (cfg == 16) {
+			cfg = MPMC_STATIC_CFG_MW_16BIT;
+		} else if (cfg == 32) {
+			cfg = MPMC_STATIC_CFG_MW_32BIT;
+		} else {
+			dev_err(&adev->dev, "invalid memory width cs%u\n", cs);
+			return -EINVAL;
+		}
+	} else {
+		dev_err(&adev->dev, "memory-width property required\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_bool(np, "mpmc,async-page-mode"))
+		cfg |= MPMC_STATIC_CFG_PM;
+
+	if (of_property_read_bool(np, "mpmc,cs-active-high"))
+		cfg |= MPMC_STATIC_CFG_PC;
+
+	if (of_property_read_bool(np, "mpmc,byte-lane-low"))
+		cfg |= MPMC_STATIC_CFG_PB;
+
+	if (of_property_read_bool(np, "mpmc,extended-wait"))
+		cfg |= MPMC_STATIC_CFG_EW;
+
+	if (amba_part(adev) == 0x172 &&
+	    of_property_read_bool(np, "mpmc,buffer-enable"))
+		cfg |= MPMC_STATIC_CFG_B;
+
+	if (of_property_read_bool(np, "mpmc,write-protect"))
+		cfg |= MPMC_STATIC_CFG_P;
+
+	writel(cfg, pl172->base + MPMC_STATIC_CFG(cs));
+	dev_dbg(&adev->dev, "mpmc static config cs%u: 0x%08x\n", cs, cfg);
+
+	/* MPMC static memory timing */
+	ret = pl172_timing_prop(adev, np, "mpmc,write-enable-delay",
+				MPMC_STATIC_WAIT_WEN(cs),
+				MPMC_STATIC_WAIT_WEN_MAX, 1);
+	if (ret)
+		goto fail;
+
+	ret = pl172_timing_prop(adev, np, "mpmc,output-enable-delay",
+				MPMC_STATIC_WAIT_OEN(cs),
+				MPMC_STATIC_WAIT_OEN_MAX, 0);
+	if (ret)
+		goto fail;
+
+	ret = pl172_timing_prop(adev, np, "mpmc,read-access-delay",
+				MPMC_STATIC_WAIT_RD(cs),
+				MPMC_STATIC_WAIT_RD_MAX, 1);
+	if (ret)
+		goto fail;
+
+	ret = pl172_timing_prop(adev, np, "mpmc,page-mode-read-delay",
+				MPMC_STATIC_WAIT_PAGE(cs),
+				MPMC_STATIC_WAIT_PAGE_MAX, 1);
+	if (ret)
+		goto fail;
+
+	ret = pl172_timing_prop(adev, np, "mpmc,write-access-delay",
+				MPMC_STATIC_WAIT_WR(cs),
+				MPMC_STATIC_WAIT_WR_MAX, 2);
+	if (ret)
+		goto fail;
+
+	ret = pl172_timing_prop(adev, np, "mpmc,turn-round-delay",
+				MPMC_STATIC_WAIT_TURN(cs),
+				MPMC_STATIC_WAIT_TURN_MAX, 1);
+	if (ret)
+		goto fail;
+
+	return 0;
+fail:
+	dev_err(&adev->dev, "failed to configure cs%u\n", cs);
+	return ret;
+}
+
+static int pl172_parse_cs_config(struct amba_device *adev,
+				 struct device_node *np)
+{
+	u32 cs;
+
+	if (!of_property_read_u32(np, "mpmc,cs", &cs)) {
+		if (cs >= PL172_MAX_CS) {
+			dev_err(&adev->dev, "cs%u invalid\n", cs);
+			return -EINVAL;
+		}
+
+		return pl172_setup_static(adev, np, cs);
+	}
+
+	dev_err(&adev->dev, "cs property required\n");
+
+	return -EINVAL;
+}
+
+static void pl172_amba_release_regions(void *data)
+{
+	struct amba_device *adev = data;
+
+	amba_release_regions(adev);
+}
+
+static const char * const pl172_revisions[] = {"r1", "r2", "r2p3", "r2p4"};
+static const char * const pl175_revisions[] = {"r1"};
+static const char * const pl176_revisions[] = {"r0"};
+
+static int pl172_probe(struct amba_device *adev, const struct amba_id *id)
+{
+	struct device_node *child_np, *np = adev->dev.of_node;
+	struct device *dev = &adev->dev;
+	static const char *rev = "?";
+	struct pl172_data *pl172;
+	int ret;
+
+	if (amba_part(adev) == 0x172) {
+		if (amba_rev(adev) < ARRAY_SIZE(pl172_revisions))
+			rev = pl172_revisions[amba_rev(adev)];
+	} else if (amba_part(adev) == 0x175) {
+		if (amba_rev(adev) < ARRAY_SIZE(pl175_revisions))
+			rev = pl175_revisions[amba_rev(adev)];
+	} else if (amba_part(adev) == 0x176) {
+		if (amba_rev(adev) < ARRAY_SIZE(pl176_revisions))
+			rev = pl176_revisions[amba_rev(adev)];
+	}
+
+	dev_info(dev, "ARM PL%x revision %s\n", amba_part(adev), rev);
+
+	pl172 = devm_kzalloc(dev, sizeof(*pl172), GFP_KERNEL);
+	if (!pl172)
+		return -ENOMEM;
+
+	pl172->clk = devm_clk_get_enabled(dev, "mpmcclk");
+	if (IS_ERR(pl172->clk))
+		return dev_err_probe(dev, PTR_ERR(pl172->clk),
+				     "no mpmcclk provided clock\n");
+
+	pl172->rate = clk_get_rate(pl172->clk) / MSEC_PER_SEC;
+	if (!pl172->rate)
+		return dev_err_probe(dev, -EINVAL,
+				     "unable to get mpmcclk clock rate\n");
+
+	ret = amba_request_regions(adev, NULL);
+	if (ret) {
+		dev_err(dev, "unable to request AMBA regions\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, pl172_amba_release_regions, adev);
+	if (ret)
+		return ret;
+
+	pl172->base = devm_ioremap(dev, adev->res.start,
+				   resource_size(&adev->res));
+	if (!pl172->base)
+		return dev_err_probe(dev, -ENOMEM, "ioremap failed\n");
+
+	amba_set_drvdata(adev, pl172);
+
+	/*
+	 * Loop through each child node, which represent a chip select, and
+	 * configure parameters and timing. If successful; populate devices
+	 * under that node.
+	 */
+	for_each_available_child_of_node(np, child_np) {
+		ret = pl172_parse_cs_config(adev, child_np);
+		if (ret)
+			continue;
+
+		of_platform_populate(child_np, NULL, NULL, dev);
+	}
+
+	return 0;
+}
+
+static const struct amba_id pl172_ids[] = {
+	/*  PrimeCell MPMC PL172, EMC found on NXP LPC18xx and LPC43xx */
+	{
+		.id	= 0x07041172,
+		.mask	= 0x3f0fffff,
+	},
+	/* PrimeCell MPMC PL175, EMC found on NXP LPC32xx */
+	{
+		.id	= 0x07041175,
+		.mask	= 0x3f0fffff,
+	},
+	/* PrimeCell MPMC PL176 */
+	{
+		.id	= 0x89041176,
+		.mask	= 0xff0fffff,
+	},
+	{ 0, 0 },
+};
+MODULE_DEVICE_TABLE(amba, pl172_ids);
+
+static struct amba_driver pl172_driver = {
+	.drv = {
+		.name	= "memory-pl172",
+	},
+	.probe		= pl172_probe,
+	.id_table	= pl172_ids,
+};
+module_amba_driver(pl172_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("PL172 Memory Controller Driver");
+MODULE_LICENSE("GPL v2");

linux-7.2.3/drivers/memory/pl353-smc.c

@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM PL353 SMC driver
+ *
+ * Copyright (C) 2012 - 2018 Xilinx, Inc
+ * Author: Punnaiah Choudary Kalluri <punnaiah@xilinx.com>
+ * Author: Naga Sureshkumar Relli <nagasure@xilinx.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+
+/**
+ * struct pl353_smc_data - Private smc driver structure
+ * @memclk:		Pointer to the peripheral clock
+ * @aclk:		Pointer to the AXI peripheral clock
+ */
+struct pl353_smc_data {
+	struct clk		*memclk;
+	struct clk		*aclk;
+};
+
+static int __maybe_unused pl353_smc_suspend(struct device *dev)
+{
+	struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
+
+	clk_disable(pl353_smc->memclk);
+	clk_disable(pl353_smc->aclk);
+
+	return 0;
+}
+
+static int __maybe_unused pl353_smc_resume(struct device *dev)
+{
+	struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_enable(pl353_smc->aclk);
+	if (ret) {
+		dev_err(dev, "Cannot enable axi domain clock.\n");
+		return ret;
+	}
+
+	ret = clk_enable(pl353_smc->memclk);
+	if (ret) {
+		dev_err(dev, "Cannot enable memory clock.\n");
+		clk_disable(pl353_smc->aclk);
+		return ret;
+	}
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(pl353_smc_dev_pm_ops, pl353_smc_suspend,
+			 pl353_smc_resume);
+
+static const struct of_device_id pl353_smc_supported_children[] = {
+	{
+		.compatible = "cfi-flash"
+	},
+	{
+		.compatible = "arm,pl353-nand-r2p1",
+	},
+	{}
+};
+
+static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
+{
+	struct device_node *of_node = adev->dev.of_node;
+	const struct of_device_id *match = NULL;
+	struct pl353_smc_data *pl353_smc;
+
+	pl353_smc = devm_kzalloc(&adev->dev, sizeof(*pl353_smc), GFP_KERNEL);
+	if (!pl353_smc)
+		return -ENOMEM;
+
+	pl353_smc->aclk = devm_clk_get_enabled(&adev->dev, "apb_pclk");
+	if (IS_ERR(pl353_smc->aclk))
+		return dev_err_probe(&adev->dev, PTR_ERR(pl353_smc->aclk),
+				     "aclk clock not found.\n");
+
+	pl353_smc->memclk = devm_clk_get_enabled(&adev->dev, "memclk");
+	if (IS_ERR(pl353_smc->memclk))
+		return dev_err_probe(&adev->dev, PTR_ERR(pl353_smc->memclk),
+				     "memclk clock not found.\n");
+
+	amba_set_drvdata(adev, pl353_smc);
+
+	/* Find compatible children. Only a single child is supported */
+	for_each_available_child_of_node_scoped(of_node, child) {
+		match = of_match_node(pl353_smc_supported_children, child);
+		if (!match) {
+			dev_warn(&adev->dev, "unsupported child node\n");
+			continue;
+		}
+		of_platform_device_create(child, NULL, &adev->dev);
+		break;
+	}
+	if (!match) {
+		dev_err(&adev->dev, "no matching children\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static const struct amba_id pl353_ids[] = {
+	{
+		.id = 0x00041353,
+		.mask = 0x000fffff,
+	},
+	{ 0, 0 },
+};
+MODULE_DEVICE_TABLE(amba, pl353_ids);
+
+static struct amba_driver pl353_smc_driver = {
+	.drv = {
+		.name = "pl353-smc",
+		.pm = &pl353_smc_dev_pm_ops,
+	},
+	.id_table = pl353_ids,
+	.probe = pl353_smc_probe,
+};
+
+module_amba_driver(pl353_smc_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("ARM PL353 SMC Driver");
+MODULE_LICENSE("GPL");

linux-7.2.3/drivers/memory/renesas-rpc-if-regs.h

@@ -0,0 +1,147 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * R-Car RPC Interface Registers Definitions
+ *
+ * Copyright (C) 2025 Renesas Electronics Corporation
+ */
+
+#ifndef __RENESAS_RPC_IF_REGS_H__
+#define __RENESAS_RPC_IF_REGS_H__
+
+#include <linux/bits.h>
+
+#define RPCIF_CMNCR		0x0000	/* R/W */
+#define RPCIF_CMNCR_MD		BIT(31)
+#define RPCIF_CMNCR_MOIIO3(val)	(((val) & 0x3) << 22)
+#define RPCIF_CMNCR_MOIIO2(val)	(((val) & 0x3) << 20)
+#define RPCIF_CMNCR_MOIIO1(val)	(((val) & 0x3) << 18)
+#define RPCIF_CMNCR_MOIIO0(val)	(((val) & 0x3) << 16)
+#define RPCIF_CMNCR_MOIIO(val)	(RPCIF_CMNCR_MOIIO0(val) | RPCIF_CMNCR_MOIIO1(val) | \
+				 RPCIF_CMNCR_MOIIO2(val) | RPCIF_CMNCR_MOIIO3(val))
+#define RPCIF_CMNCR_IO3FV(val)	(((val) & 0x3) << 14) /* documented for RZ/G2L */
+#define RPCIF_CMNCR_IO2FV(val)	(((val) & 0x3) << 12) /* documented for RZ/G2L */
+#define RPCIF_CMNCR_IO0FV(val)	(((val) & 0x3) << 8)
+#define RPCIF_CMNCR_IOFV(val)	(RPCIF_CMNCR_IO0FV(val) | RPCIF_CMNCR_IO2FV(val) | \
+				 RPCIF_CMNCR_IO3FV(val))
+#define RPCIF_CMNCR_BSZ(val)	(((val) & 0x3) << 0)
+
+#define RPCIF_SSLDR		0x0004	/* R/W */
+#define RPCIF_SSLDR_SPNDL(d)	(((d) & 0x7) << 16)
+#define RPCIF_SSLDR_SLNDL(d)	(((d) & 0x7) << 8)
+#define RPCIF_SSLDR_SCKDL(d)	(((d) & 0x7) << 0)
+
+#define RPCIF_DRCR		0x000C	/* R/W */
+#define RPCIF_DRCR_SSLN		BIT(24)
+#define RPCIF_DRCR_RBURST(v)	((((v) - 1) & 0x1F) << 16)
+#define RPCIF_DRCR_RCF		BIT(9)
+#define RPCIF_DRCR_RBE		BIT(8)
+#define RPCIF_DRCR_SSLE		BIT(0)
+
+#define RPCIF_DRCMR		0x0010	/* R/W */
+#define RPCIF_DRCMR_CMD(c)	(((c) & 0xFF) << 16)
+#define RPCIF_DRCMR_OCMD(c)	(((c) & 0xFF) << 0)
+
+#define RPCIF_DREAR		0x0014	/* R/W */
+#define RPCIF_DREAR_EAV(c)	(((c) & 0xF) << 16)
+#define RPCIF_DREAR_EAC(c)	(((c) & 0x7) << 0)
+
+#define RPCIF_DROPR		0x0018	/* R/W */
+
+#define RPCIF_DRENR		0x001C	/* R/W */
+#define RPCIF_DRENR_CDB(o)	(((u32)((o) & 0x3)) << 30)
+#define RPCIF_DRENR_OCDB(o)	(((o) & 0x3) << 28)
+#define RPCIF_DRENR_ADB(o)	(((o) & 0x3) << 24)
+#define RPCIF_DRENR_OPDB(o)	(((o) & 0x3) << 20)
+#define RPCIF_DRENR_DRDB(o)	(((o) & 0x3) << 16)
+#define RPCIF_DRENR_DME		BIT(15)
+#define RPCIF_DRENR_CDE		BIT(14)
+#define RPCIF_DRENR_OCDE	BIT(12)
+#define RPCIF_DRENR_ADE(v)	(((v) & 0xF) << 8)
+#define RPCIF_DRENR_OPDE(v)	(((v) & 0xF) << 4)
+
+#define RPCIF_SMCR		0x0020	/* R/W */
+#define RPCIF_SMCR_SSLKP	BIT(8)
+#define RPCIF_SMCR_SPIRE	BIT(2)
+#define RPCIF_SMCR_SPIWE	BIT(1)
+#define RPCIF_SMCR_SPIE		BIT(0)
+
+#define RPCIF_SMCMR		0x0024	/* R/W */
+#define RPCIF_SMCMR_CMD(c)	(((c) & 0xFF) << 16)
+#define RPCIF_SMCMR_OCMD(c)	(((c) & 0xFF) << 0)
+
+#define RPCIF_SMADR		0x0028	/* R/W */
+
+#define RPCIF_SMOPR		0x002C	/* R/W */
+#define RPCIF_SMOPR_OPD3(o)	(((o) & 0xFF) << 24)
+#define RPCIF_SMOPR_OPD2(o)	(((o) & 0xFF) << 16)
+#define RPCIF_SMOPR_OPD1(o)	(((o) & 0xFF) << 8)
+#define RPCIF_SMOPR_OPD0(o)	(((o) & 0xFF) << 0)
+
+#define RPCIF_SMENR		0x0030	/* R/W */
+#define RPCIF_SMENR_CDB(o)	(((o) & 0x3) << 30)
+#define RPCIF_SMENR_OCDB(o)	(((o) & 0x3) << 28)
+#define RPCIF_SMENR_ADB(o)	(((o) & 0x3) << 24)
+#define RPCIF_SMENR_OPDB(o)	(((o) & 0x3) << 20)
+#define RPCIF_SMENR_SPIDB(o)	(((o) & 0x3) << 16)
+#define RPCIF_SMENR_DME		BIT(15)
+#define RPCIF_SMENR_CDE		BIT(14)
+#define RPCIF_SMENR_OCDE	BIT(12)
+#define RPCIF_SMENR_ADE(v)	(((v) & 0xF) << 8)
+#define RPCIF_SMENR_OPDE(v)	(((v) & 0xF) << 4)
+#define RPCIF_SMENR_SPIDE(v)	(((v) & 0xF) << 0)
+
+#define RPCIF_SMRDR0		0x0038	/* R */
+#define RPCIF_SMRDR1		0x003C	/* R */
+#define RPCIF_SMWDR0		0x0040	/* W */
+#define RPCIF_SMWDR1		0x0044	/* W */
+
+#define RPCIF_CMNSR		0x0048	/* R */
+#define RPCIF_CMNSR_SSLF	BIT(1)
+#define RPCIF_CMNSR_TEND	BIT(0)
+
+#define RPCIF_DRDMCR		0x0058	/* R/W */
+#define RPCIF_DMDMCR_DMCYC(v)	((((v) - 1) & 0x1F) << 0)
+
+#define RPCIF_DRDRENR		0x005C	/* R/W */
+#define RPCIF_DRDRENR_HYPE(v)	(((v) & 0x7) << 12)
+#define RPCIF_DRDRENR_ADDRE	BIT(8)
+#define RPCIF_DRDRENR_OPDRE	BIT(4)
+#define RPCIF_DRDRENR_DRDRE	BIT(0)
+
+#define RPCIF_SMDMCR		0x0060	/* R/W */
+#define RPCIF_SMDMCR_DMCYC(v)	((((v) - 1) & 0x1F) << 0)
+
+#define RPCIF_SMDRENR		0x0064	/* R/W */
+#define RPCIF_SMDRENR_HYPE(v)	(((v) & 0x7) << 12)
+#define RPCIF_SMDRENR_ADDRE	BIT(8)
+#define RPCIF_SMDRENR_OPDRE	BIT(4)
+#define RPCIF_SMDRENR_SPIDRE	BIT(0)
+
+#define RPCIF_PHYADD		0x0070	/* R/W available on R-Car E3/D3/V3M and RZ/G2{E,L} */
+#define RPCIF_PHYWR		0x0074	/* R/W available on R-Car E3/D3/V3M and RZ/G2{E,L} */
+
+#define RPCIF_PHYCNT		0x007C	/* R/W */
+#define RPCIF_PHYCNT_CAL	BIT(31)
+#define RPCIF_PHYCNT_OCTA(v)	(((v) & 0x3) << 22)
+#define RPCIF_PHYCNT_EXDS	BIT(21)
+#define RPCIF_PHYCNT_OCT	BIT(20)
+#define RPCIF_PHYCNT_DDRCAL	BIT(19)
+#define RPCIF_PHYCNT_HS		BIT(18)
+#define RPCIF_PHYCNT_CKSEL(v)	(((v) & 0x3) << 16) /* valid only for RZ/G2L */
+#define RPCIF_PHYCNT_STRTIM(v)	(((v) & 0x7) << 15 | ((v) & 0x8) << 24) /* valid for R-Car and RZ/G2{E,H,M,N} */
+
+#define RPCIF_PHYCNT_WBUF2	BIT(4)
+#define RPCIF_PHYCNT_WBUF	BIT(2)
+#define RPCIF_PHYCNT_PHYMEM(v)	(((v) & 0x3) << 0)
+#define RPCIF_PHYCNT_PHYMEM_MASK GENMASK(1, 0)
+
+#define RPCIF_PHYOFFSET1	0x0080	/* R/W */
+#define RPCIF_PHYOFFSET1_DDRTMG(v) (((v) & 0x3) << 28)
+
+#define RPCIF_PHYOFFSET2	0x0084	/* R/W */
+#define RPCIF_PHYOFFSET2_OCTTMG(v) (((v) & 0x7) << 8)
+
+#define RPCIF_PHYINT		0x0088	/* R/W */
+#define RPCIF_PHYINT_WPVAL	BIT(1)
+
+#endif /* __RENESAS_RPC_IF_REGS_H__ */

linux-7.2.3/drivers/memory/renesas-xspi-if-regs.h

@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * RZ xSPI Interface Registers Definitions
+ *
+ * Copyright (C) 2025 Renesas Electronics Corporation
+ */
+
+#ifndef __RENESAS_XSPI_IF_REGS_H__
+#define __RENESAS_XSPI_IF_REGS_H__
+
+#include <linux/bits.h>
+
+/* xSPI Wrapper Configuration Register */
+#define XSPI_WRAPCFG		0x0000
+
+/* xSPI Bridge Configuration Register */
+#define XSPI_BMCFG		0x0008
+#define XSPI_BMCFG_WRMD		BIT(0)
+#define XSPI_BMCFG_MWRCOMB	BIT(7)
+#define XSPI_BMCFG_MWRSIZE(val)	(((val) & 0xff) << 8)
+#define XSPI_BMCFG_PREEN	BIT(16)
+
+/* xSPI Command Map Configuration Register 0 CS0 */
+#define XSPI_CMCFG0CS0		0x0010
+#define XSPI_CMCFG0_FFMT(val)		(((val) & 0x03) << 0)
+#define XSPI_CMCFG0_ADDSIZE(val)	(((val) & 0x03) << 2)
+
+/* xSPI Command Map Configuration Register 1 CS0 */
+#define XSPI_CMCFG1CS0		0x0014
+#define XSPI_CMCFG1_RDCMD(val)	(((val) & 0xffff) << 0)
+#define XSPI_CMCFG1_RDCMD_UPPER_BYTE(val)	(((val) & 0xff) << 8)
+#define XSPI_CMCFG1_RDLATE(val)	(((val) & 0x1f) << 16)
+
+/* xSPI Command Map Configuration Register 2 CS0 */
+#define XSPI_CMCFG2CS0		0x0018
+#define XSPI_CMCFG2_WRCMD(val)	(((val) & 0xffff) << 0)
+#define XSPI_CMCFG2_WRCMD_UPPER(val)	(((val) & 0xff) << 8)
+#define XSPI_CMCFG2_WRLATE(val)	(((val) & 0x1f) << 16)
+
+/* xSPI Link I/O Configuration Register CS0 */
+#define XSPI_LIOCFGCS0		0x0050
+#define XSPI_LIOCFG_PRTMD(val)	(((val) & 0x3ff) << 0)
+#define XSPI_LIOCFG_CSMIN(val)	(((val) & 0x0f) << 16)
+#define XSPI_LIOCFG_CSASTEX	BIT(20)
+#define XSPI_LIOCFG_CSNEGEX	BIT(21)
+
+/* xSPI Bridge Map Control Register 0 */
+#define XSPI_BMCTL0		0x0060
+#define XSPI_BMCTL0_CS0ACC(val)	(((val) & 0x03) << 0)
+
+/* xSPI Bridge Map Control Register 1 */
+#define XSPI_BMCTL1		0x0064
+#define XSPI_BMCTL1_MWRPUSH	BIT(8)
+
+/* xSPI Command Manual Control Register 0 */
+#define XSPI_CDCTL0		0x0070
+#define XSPI_CDCTL0_TRREQ	BIT(0)
+#define XSPI_CDCTL0_CSSEL	BIT(3)
+#define XSPI_CDCTL0_TRNUM(val)	(((val) & 0x03) << 4)
+
+/* xSPI Command Manual Type Buf */
+#define XSPI_CDTBUF0		0x0080
+#define XSPI_CDTBUF_CMDSIZE(val)	(((val) & 0x03) << 0)
+#define XSPI_CDTBUF_ADDSIZE(val)	(((val) & 0x07) << 2)
+#define XSPI_CDTBUF_DATASIZE(val)	(((val) & 0x0f) << 5)
+#define XSPI_CDTBUF_LATE(val)		(((val) & 0x1f) << 9)
+#define XSPI_CDTBUF_TRTYPE	BIT(15)
+#define XSPI_CDTBUF_CMD(val)		(((val) & 0xffff) << 16)
+#define XSPI_CDTBUF_CMD_FIELD(val)	(((val) & 0xff) << 24)
+
+/* xSPI Command Manual Address Buff */
+#define XSPI_CDABUF0		0x0084
+
+/* xSPI Command Manual Data 0 Buf */
+#define XSPI_CDD0BUF0		0x0088
+
+/* xSPI Command Manual Data 1 Buf */
+#define XSPI_CDD1BUF0		0x008c
+
+/* xSPI Command Calibration Control Register 0 CS0 */
+#define XSPI_CCCTL0CS0		0x0130
+#define XSPI_CCCTL0_CAEN	BIT(0)
+
+/* xSPI Interrupt Status Register */
+#define XSPI_INTS		0x0190
+#define XSPI_INTS_CMDCMP	BIT(0)
+
+/* xSPI Interrupt Clear Register */
+#define XSPI_INTC		0x0194
+#define XSPI_INTC_CMDCMPC	BIT(0)
+
+/* xSPI Interrupt Enable Register */
+#define XSPI_INTE		0x0198
+#define XSPI_INTE_CMDCMPE	BIT(0)
+
+/* Maximum data size of MWRSIZE*/
+#define MWRSIZE_MAX		64
+
+/* xSPI Protocol mode */
+#define PROTO_1S_2S_2S		0x48
+#define PROTO_2S_2S_2S		0x49
+#define PROTO_1S_4S_4S		0x090
+#define PROTO_4S_4S_4S		0x092
+
+#endif /* __RENESAS_XSPI_IF_REGS_H__ */

linux-7.2.3/drivers/memory/samsung/Kconfig

@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+config SAMSUNG_MC
+	bool "Samsung Exynos Memory Controller support" if COMPILE_TEST
+	help
+	  Support for the Memory Controller (MC) devices found on
+	  Samsung Exynos SoCs.
+
+if SAMSUNG_MC
+
+config EXYNOS5422_DMC
+	tristate "Exynos5422 Dynamic Memory Controller driver"
+	depends on ARCH_EXYNOS || (COMPILE_TEST && HAS_IOMEM)
+	select DDR
+	depends on DEVFREQ_GOV_SIMPLE_ONDEMAND
+	depends on (PM_DEVFREQ && PM_DEVFREQ_EVENT)
+	help
+	  This adds driver for Samsung Exynos5422 SoC DMC (Dynamic Memory
+	  Controller).  The driver provides support for Dynamic Voltage and
+	  Frequency Scaling in DMC and DRAM. It also supports changing timings
+	  of DRAM running with different frequency. The timings are calculated
+	  based on DT memory information.
+	  If unsure, say Y on devices with Samsung Exynos SoCs.
+
+config EXYNOS_SROM
+	bool "Exynos SROM controller driver" if COMPILE_TEST
+	depends on (ARM && ARCH_EXYNOS) || (COMPILE_TEST && HAS_IOMEM)
+	help
+	  This adds driver for Samsung Exynos SoC SROM controller.  The driver
+	  in basic operation mode only saves and restores SROM registers
+	  during suspend.  If however appropriate device tree configuration
+	  is provided, the driver enables support for external memory
+	  or external devices.
+	  If unsure, say Y on devices with Samsung Exynos SoCs.
+
+endif

linux-7.2.3/drivers/memory/samsung/Makefile

@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_EXYNOS5422_DMC)	+= exynos5422-dmc.o
+obj-$(CONFIG_EXYNOS_SROM)	+= exynos-srom.o

linux-7.2.3/drivers/memory/samsung/exynos-srom.c

@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2015 Samsung Electronics Co., Ltd.
+//	      http://www.samsung.com/
+//
+// Exynos - SROM Controller support
+// Author: Pankaj Dubey <pankaj.dubey@samsung.com>
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "exynos-srom.h"
+
+static const unsigned long exynos_srom_offsets[] = {
+	/* SROM side */
+	EXYNOS_SROM_BW,
+	EXYNOS_SROM_BC0,
+	EXYNOS_SROM_BC1,
+	EXYNOS_SROM_BC2,
+	EXYNOS_SROM_BC3,
+};
+
+/**
+ * struct exynos_srom_reg_dump: register dump of SROM Controller registers.
+ * @offset: srom register offset from the controller base address.
+ * @value: the value of register under the offset.
+ */
+struct exynos_srom_reg_dump {
+	u32     offset;
+	u32     value;
+};
+
+/**
+ * struct exynos_srom: platform data for exynos srom controller driver.
+ * @dev: platform device pointer
+ * @reg_base: srom base address
+ * @reg_offset: exynos_srom_reg_dump pointer to hold offset and its value.
+ */
+struct exynos_srom {
+	struct device *dev;
+	void __iomem *reg_base;
+	struct exynos_srom_reg_dump *reg_offset;
+};
+
+static struct exynos_srom_reg_dump *
+exynos_srom_alloc_reg_dump(const unsigned long *rdump,
+			   unsigned long nr_rdump)
+{
+	struct exynos_srom_reg_dump *rd;
+	unsigned int i;
+
+	rd = kzalloc_objs(*rd, nr_rdump);
+	if (!rd)
+		return NULL;
+
+	for (i = 0; i < nr_rdump; ++i)
+		rd[i].offset = rdump[i];
+
+	return rd;
+}
+
+static int exynos_srom_configure_bank(struct exynos_srom *srom,
+				      struct device_node *np)
+{
+	u32 bank, width, pmc = 0;
+	u32 timing[6];
+	u32 cs, bw;
+
+	if (of_property_read_u32(np, "reg", &bank))
+		return -EINVAL;
+	if (of_property_read_u32(np, "reg-io-width", &width))
+		width = 1;
+	if (of_property_read_bool(np, "samsung,srom-page-mode"))
+		pmc = 1 << EXYNOS_SROM_BCX__PMC__SHIFT;
+	if (of_property_read_u32_array(np, "samsung,srom-timing", timing,
+				       ARRAY_SIZE(timing)))
+		return -EINVAL;
+
+	bank *= 4; /* Convert bank into shift/offset */
+
+	cs = 1 << EXYNOS_SROM_BW__BYTEENABLE__SHIFT;
+	if (width == 2)
+		cs |= 1 << EXYNOS_SROM_BW__DATAWIDTH__SHIFT;
+
+	bw = readl_relaxed(srom->reg_base + EXYNOS_SROM_BW);
+	bw = (bw & ~(EXYNOS_SROM_BW__CS_MASK << bank)) | (cs << bank);
+	writel_relaxed(bw, srom->reg_base + EXYNOS_SROM_BW);
+
+	writel_relaxed(pmc | (timing[0] << EXYNOS_SROM_BCX__TACP__SHIFT) |
+		       (timing[1] << EXYNOS_SROM_BCX__TCAH__SHIFT) |
+		       (timing[2] << EXYNOS_SROM_BCX__TCOH__SHIFT) |
+		       (timing[3] << EXYNOS_SROM_BCX__TACC__SHIFT) |
+		       (timing[4] << EXYNOS_SROM_BCX__TCOS__SHIFT) |
+		       (timing[5] << EXYNOS_SROM_BCX__TACS__SHIFT),
+		       srom->reg_base + EXYNOS_SROM_BC0 + bank);
+
+	return 0;
+}
+
+static int exynos_srom_probe(struct platform_device *pdev)
+{
+	struct device_node *np, *child;
+	struct exynos_srom *srom;
+	struct device *dev = &pdev->dev;
+	bool bad_bank_config = false;
+
+	np = dev->of_node;
+	if (!np) {
+		dev_err(&pdev->dev, "could not find device info\n");
+		return -EINVAL;
+	}
+
+	srom = devm_kzalloc(&pdev->dev,
+			    sizeof(struct exynos_srom), GFP_KERNEL);
+	if (!srom)
+		return -ENOMEM;
+
+	srom->dev = dev;
+	srom->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(srom->reg_base)) {
+		dev_err(&pdev->dev, "iomap of exynos srom controller failed\n");
+		return PTR_ERR(srom->reg_base);
+	}
+
+	platform_set_drvdata(pdev, srom);
+
+	srom->reg_offset = exynos_srom_alloc_reg_dump(exynos_srom_offsets,
+						      ARRAY_SIZE(exynos_srom_offsets));
+	if (!srom->reg_offset)
+		return -ENOMEM;
+
+	for_each_child_of_node(np, child) {
+		if (exynos_srom_configure_bank(srom, child)) {
+			dev_err(dev,
+				"Could not decode bank configuration for %pOFn\n",
+				child);
+			bad_bank_config = true;
+		}
+	}
+
+	/*
+	 * If any bank failed to configure, we still provide suspend/resume,
+	 * but do not probe child devices
+	 */
+	if (bad_bank_config)
+		return 0;
+
+	return of_platform_populate(np, NULL, NULL, dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void exynos_srom_save(void __iomem *base,
+			     struct exynos_srom_reg_dump *rd,
+			     unsigned int num_regs)
+{
+	for (; num_regs > 0; --num_regs, ++rd)
+		rd->value = readl(base + rd->offset);
+}
+
+static void exynos_srom_restore(void __iomem *base,
+				const struct exynos_srom_reg_dump *rd,
+				unsigned int num_regs)
+{
+	for (; num_regs > 0; --num_regs, ++rd)
+		writel(rd->value, base + rd->offset);
+}
+
+static int exynos_srom_suspend(struct device *dev)
+{
+	struct exynos_srom *srom = dev_get_drvdata(dev);
+
+	exynos_srom_save(srom->reg_base, srom->reg_offset,
+			 ARRAY_SIZE(exynos_srom_offsets));
+	return 0;
+}
+
+static int exynos_srom_resume(struct device *dev)
+{
+	struct exynos_srom *srom = dev_get_drvdata(dev);
+
+	exynos_srom_restore(srom->reg_base, srom->reg_offset,
+			    ARRAY_SIZE(exynos_srom_offsets));
+	return 0;
+}
+#endif
+
+static const struct of_device_id of_exynos_srom_ids[] = {
+	{
+		.compatible	= "samsung,exynos4210-srom",
+	},
+	{},
+};
+
+static SIMPLE_DEV_PM_OPS(exynos_srom_pm_ops, exynos_srom_suspend, exynos_srom_resume);
+
+static struct platform_driver exynos_srom_driver = {
+	.probe = exynos_srom_probe,
+	.driver = {
+		.name = "exynos-srom",
+		.of_match_table = of_exynos_srom_ids,
+		.pm = &exynos_srom_pm_ops,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(exynos_srom_driver);

linux-7.2.3/drivers/memory/samsung/exynos-srom.h

@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Exynos SROMC register definitions
+ */
+
+#ifndef __EXYNOS_SROM_H
+#define __EXYNOS_SROM_H __FILE__
+
+#define EXYNOS_SROMREG(x)		(x)
+
+#define EXYNOS_SROM_BW		EXYNOS_SROMREG(0x0)
+#define EXYNOS_SROM_BC0		EXYNOS_SROMREG(0x4)
+#define EXYNOS_SROM_BC1		EXYNOS_SROMREG(0x8)
+#define EXYNOS_SROM_BC2		EXYNOS_SROMREG(0xc)
+#define EXYNOS_SROM_BC3		EXYNOS_SROMREG(0x10)
+#define EXYNOS_SROM_BC4		EXYNOS_SROMREG(0x14)
+#define EXYNOS_SROM_BC5		EXYNOS_SROMREG(0x18)
+
+/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
+
+#define EXYNOS_SROM_BW__DATAWIDTH__SHIFT	0
+#define EXYNOS_SROM_BW__ADDRMODE__SHIFT		1
+#define EXYNOS_SROM_BW__WAITENABLE__SHIFT	2
+#define EXYNOS_SROM_BW__BYTEENABLE__SHIFT	3
+
+#define EXYNOS_SROM_BW__CS_MASK			0xf
+
+#define EXYNOS_SROM_BW__NCS0__SHIFT		0
+#define EXYNOS_SROM_BW__NCS1__SHIFT		4
+#define EXYNOS_SROM_BW__NCS2__SHIFT		8
+#define EXYNOS_SROM_BW__NCS3__SHIFT		12
+#define EXYNOS_SROM_BW__NCS4__SHIFT		16
+#define EXYNOS_SROM_BW__NCS5__SHIFT		20
+
+/* applies to same to BCS0 - BCS3 */
+
+#define EXYNOS_SROM_BCX__PMC__SHIFT		0
+#define EXYNOS_SROM_BCX__TACP__SHIFT		4
+#define EXYNOS_SROM_BCX__TCAH__SHIFT		8
+#define EXYNOS_SROM_BCX__TCOH__SHIFT		12
+#define EXYNOS_SROM_BCX__TACC__SHIFT		16
+#define EXYNOS_SROM_BCX__TCOS__SHIFT		24
+#define EXYNOS_SROM_BCX__TACS__SHIFT		28
+
+#endif /* __EXYNOS_SROM_H */

linux-7.2.3/drivers/memory/stm32_omm.c

@@ -0,0 +1,469 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author(s): Patrice Chotard <patrice.chotard@foss.st.com> for STMicroelectronics.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bus/stm32_firewall_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#define OMM_CR			0
+#define CR_MUXEN		BIT(0)
+#define CR_MUXENMODE_MASK	GENMASK(1, 0)
+#define CR_CSSEL_OVR_EN		BIT(4)
+#define CR_CSSEL_OVR_MASK	GENMASK(6, 5)
+#define CR_REQ2ACK_MASK		GENMASK(23, 16)
+
+#define OMM_CHILD_NB		2
+#define OMM_CLK_NB		3
+
+struct stm32_omm {
+	struct resource *mm_res;
+	struct clk_bulk_data clk_bulk[OMM_CLK_NB];
+	struct reset_control *child_reset[OMM_CHILD_NB];
+	void __iomem *io_base;
+	u32 cr;
+	u8 nb_child;
+	bool restore_omm;
+};
+
+static int stm32_omm_set_amcr(struct device *dev, bool set)
+{
+	struct stm32_omm *omm = dev_get_drvdata(dev);
+	resource_size_t mm_ospi2_size = 0;
+	static const char * const mm_name[] = { "ospi1", "ospi2" };
+	struct regmap *syscfg_regmap;
+	struct device_node *node;
+	struct resource res, res1;
+	unsigned int syscon_args[2];
+	int ret, idx;
+	unsigned int i, amcr, read_amcr;
+
+	for (i = 0; i < omm->nb_child; i++) {
+		idx = of_property_match_string(dev->of_node,
+					       "memory-region-names",
+					       mm_name[i]);
+		if (idx < 0)
+			continue;
+
+		/* res1 only used on second loop iteration */
+		res1.start = res.start;
+		res1.end = res.end;
+
+		node = of_parse_phandle(dev->of_node, "memory-region", idx);
+		if (!node)
+			continue;
+
+		ret = of_address_to_resource(node, 0, &res);
+		if (ret) {
+			of_node_put(node);
+			dev_err(dev, "unable to resolve memory region\n");
+			return ret;
+		}
+
+		/* check that memory region fits inside OMM memory map area */
+		if (!resource_contains(omm->mm_res, &res)) {
+			dev_err(dev, "%s doesn't fit inside OMM memory map area\n",
+				mm_name[i]);
+			dev_err(dev, "%pR doesn't fit inside %pR\n", &res, omm->mm_res);
+			of_node_put(node);
+
+			return -EFAULT;
+		}
+
+		if (i == 1) {
+			mm_ospi2_size = resource_size(&res);
+
+			/* check that OMM memory region 1 doesn't overlap memory region 2 */
+			if (resource_overlaps(&res, &res1)) {
+				dev_err(dev, "OMM memory-region %s overlaps memory region %s\n",
+					mm_name[0], mm_name[1]);
+				dev_err(dev, "%pR overlaps %pR\n", &res1, &res);
+				of_node_put(node);
+
+				return -EFAULT;
+			}
+		}
+		of_node_put(node);
+	}
+
+	syscfg_regmap = syscon_regmap_lookup_by_phandle_args(dev->of_node, "st,syscfg-amcr",
+							     2, syscon_args);
+	if (IS_ERR(syscfg_regmap))
+		return dev_err_probe(dev, PTR_ERR(syscfg_regmap),
+				     "Failed to get st,syscfg-amcr property\n");
+
+	amcr = mm_ospi2_size / SZ_64M;
+
+	if (set)
+		regmap_update_bits(syscfg_regmap, syscon_args[0], syscon_args[1], amcr);
+
+	/* read AMCR and check coherency with memory-map areas defined in DT */
+	regmap_read(syscfg_regmap, syscon_args[0], &read_amcr);
+	read_amcr = read_amcr >> (ffs(syscon_args[1]) - 1);
+
+	if (amcr != read_amcr) {
+		dev_err(dev, "AMCR value not coherent with DT memory-map areas\n");
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int stm32_omm_toggle_child_clock(struct device *dev, bool enable)
+{
+	struct stm32_omm *omm = dev_get_drvdata(dev);
+	int i, ret;
+
+	for (i = 0; i < omm->nb_child; i++) {
+		if (enable) {
+			ret = clk_prepare_enable(omm->clk_bulk[i + 1].clk);
+			if (ret) {
+				dev_err(dev, "Can not enable clock\n");
+				goto clk_error;
+			}
+		} else {
+			clk_disable_unprepare(omm->clk_bulk[i + 1].clk);
+		}
+	}
+
+	return 0;
+
+clk_error:
+	while (i--)
+		clk_disable_unprepare(omm->clk_bulk[i + 1].clk);
+
+	return ret;
+}
+
+static int stm32_omm_disable_child(struct device *dev)
+{
+	struct stm32_omm *omm = dev_get_drvdata(dev);
+	struct reset_control *reset;
+	int ret;
+	u8 i;
+
+	ret = stm32_omm_toggle_child_clock(dev, true);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < omm->nb_child; i++) {
+		/* reset OSPI to ensure CR_EN bit is set to 0 */
+		reset = omm->child_reset[i];
+		ret = reset_control_acquire(reset);
+		if (ret) {
+			stm32_omm_toggle_child_clock(dev, false);
+			dev_err(dev, "Can not acquire reset %d\n", ret);
+			return ret;
+		}
+
+		reset_control_assert(reset);
+		udelay(2);
+		reset_control_deassert(reset);
+
+		reset_control_release(reset);
+	}
+
+	return stm32_omm_toggle_child_clock(dev, false);
+}
+
+static int stm32_omm_configure(struct device *dev)
+{
+	static const char * const clocks_name[] = {"omm", "ospi1", "ospi2"};
+	struct stm32_omm *omm = dev_get_drvdata(dev);
+	unsigned long clk_rate_max = 0;
+	u32 mux = 0;
+	u32 cssel_ovr = 0;
+	u32 req2ack = 0;
+	struct reset_control *rstc;
+	unsigned long clk_rate;
+	int ret;
+	u8 i;
+
+	for (i = 0; i < OMM_CLK_NB; i++)
+		omm->clk_bulk[i].id = clocks_name[i];
+
+	/* retrieve OMM, OSPI1 and OSPI2 clocks */
+	ret = devm_clk_bulk_get(dev, OMM_CLK_NB, omm->clk_bulk);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get OMM/OSPI's clocks\n");
+
+	/* Ensure both OSPI instance are disabled before configuring OMM */
+	ret = stm32_omm_disable_child(dev);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
+		return ret;
+
+	/* parse children's clock */
+	for (i = 1; i <= omm->nb_child; i++) {
+		clk_rate = clk_get_rate(omm->clk_bulk[i].clk);
+		if (!clk_rate) {
+			dev_err(dev, "Invalid clock rate\n");
+			ret = -EINVAL;
+			goto error;
+		}
+
+		if (clk_rate > clk_rate_max)
+			clk_rate_max = clk_rate;
+	}
+
+	rstc = devm_reset_control_get_exclusive(dev, "omm");
+	if (IS_ERR(rstc)) {
+		ret = dev_err_probe(dev, PTR_ERR(rstc), "reset get failed\n");
+		goto error;
+	}
+
+	reset_control_assert(rstc);
+	udelay(2);
+	reset_control_deassert(rstc);
+
+	omm->cr = readl_relaxed(omm->io_base + OMM_CR);
+	/* optional */
+	ret = of_property_read_u32(dev->of_node, "st,omm-mux", &mux);
+	if (!ret) {
+		if (mux & CR_MUXEN) {
+			ret = of_property_read_u32(dev->of_node, "st,omm-req2ack-ns",
+						   &req2ack);
+			if (!ret && req2ack) {
+				req2ack = DIV_ROUND_UP(req2ack, NSEC_PER_SEC / clk_rate_max) - 1;
+
+				if (req2ack > 256)
+					req2ack = 256;
+			}
+
+			req2ack = FIELD_PREP(CR_REQ2ACK_MASK, req2ack);
+
+			omm->cr &= ~CR_REQ2ACK_MASK;
+			omm->cr |= FIELD_PREP(CR_REQ2ACK_MASK, req2ack);
+
+			/*
+			 * If the mux is enabled, the 2 OSPI clocks have to be
+			 * always enabled
+			 */
+			ret = stm32_omm_toggle_child_clock(dev, true);
+			if (ret)
+				goto error;
+		}
+
+		omm->cr &= ~CR_MUXENMODE_MASK;
+		omm->cr |= FIELD_PREP(CR_MUXENMODE_MASK, mux);
+	}
+
+	/* optional */
+	ret = of_property_read_u32(dev->of_node, "st,omm-cssel-ovr", &cssel_ovr);
+	if (!ret) {
+		omm->cr &= ~CR_CSSEL_OVR_MASK;
+		omm->cr |= FIELD_PREP(CR_CSSEL_OVR_MASK, cssel_ovr);
+		omm->cr |= CR_CSSEL_OVR_EN;
+	}
+
+	omm->restore_omm = true;
+	writel_relaxed(omm->cr, omm->io_base + OMM_CR);
+
+	ret = stm32_omm_set_amcr(dev, true);
+
+error:
+	pm_runtime_put_sync_suspend(dev);
+
+	return ret;
+}
+
+static int stm32_omm_check_access(struct device_node *np)
+{
+	struct stm32_firewall firewall;
+	int ret;
+
+	ret = stm32_firewall_get_firewall(np, &firewall, 1);
+	if (ret)
+		return ret;
+
+	return stm32_firewall_grant_access(&firewall);
+}
+
+static int stm32_omm_probe(struct platform_device *pdev)
+{
+	static const char * const resets_name[] = {"ospi1", "ospi2"};
+	struct device *dev = &pdev->dev;
+	u8 child_access_granted = 0;
+	struct stm32_omm *omm;
+	int i, ret;
+
+	omm = devm_kzalloc(dev, sizeof(*omm), GFP_KERNEL);
+	if (!omm)
+		return -ENOMEM;
+
+	omm->io_base = devm_platform_ioremap_resource_byname(pdev, "regs");
+	if (IS_ERR(omm->io_base))
+		return PTR_ERR(omm->io_base);
+
+	omm->mm_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "memory_map");
+	if (!omm->mm_res)
+		return -ENODEV;
+
+	/* check child's access */
+	for_each_child_of_node_scoped(dev->of_node, child) {
+		if (omm->nb_child >= OMM_CHILD_NB) {
+			dev_err(dev, "Bad DT, found too much children\n");
+			return -E2BIG;
+		}
+
+		ret = stm32_omm_check_access(child);
+		if (ret < 0 && ret != -EACCES)
+			return ret;
+
+		if (!ret)
+			child_access_granted++;
+
+		omm->nb_child++;
+	}
+
+	if (omm->nb_child != OMM_CHILD_NB)
+		return -EINVAL;
+
+	platform_set_drvdata(pdev, omm);
+
+	devm_pm_runtime_enable(dev);
+
+	/* check if OMM's resource access is granted */
+	ret = stm32_omm_check_access(dev->of_node);
+	if (ret < 0 && ret != -EACCES)
+		return ret;
+
+	for (i = 0; i < omm->nb_child; i++) {
+		omm->child_reset[i] = devm_reset_control_get_exclusive_released(dev,
+										resets_name[i]);
+
+		if (IS_ERR(omm->child_reset[i]))
+			return dev_err_probe(dev, PTR_ERR(omm->child_reset[i]),
+					     "Can't get %s reset\n", resets_name[i]);
+	}
+
+	if (!ret && child_access_granted == OMM_CHILD_NB) {
+		ret = stm32_omm_configure(dev);
+		if (ret)
+			return ret;
+	} else {
+		dev_dbg(dev, "Octo Memory Manager resource's access not granted\n");
+		/*
+		 * AMCR can't be set, so check if current value is coherent
+		 * with memory-map areas defined in DT
+		 */
+		ret = stm32_omm_set_amcr(dev, false);
+		if (ret)
+			return ret;
+	}
+
+	ret = devm_of_platform_populate(dev);
+	if (ret) {
+		if (omm->cr & CR_MUXEN)
+			stm32_omm_toggle_child_clock(&pdev->dev, false);
+
+		return dev_err_probe(dev, ret, "Failed to create Octo Memory Manager child\n");
+	}
+
+	return 0;
+}
+
+static void stm32_omm_remove(struct platform_device *pdev)
+{
+	struct stm32_omm *omm = platform_get_drvdata(pdev);
+
+	if (omm->cr & CR_MUXEN)
+		stm32_omm_toggle_child_clock(&pdev->dev, false);
+}
+
+static const struct of_device_id stm32_omm_of_match[] = {
+	{ .compatible = "st,stm32mp25-omm", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, stm32_omm_of_match);
+
+static int __maybe_unused stm32_omm_runtime_suspend(struct device *dev)
+{
+	struct stm32_omm *omm = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(omm->clk_bulk[0].clk);
+
+	return 0;
+}
+
+static int __maybe_unused stm32_omm_runtime_resume(struct device *dev)
+{
+	struct stm32_omm *omm = dev_get_drvdata(dev);
+
+	return clk_prepare_enable(omm->clk_bulk[0].clk);
+}
+
+static int __maybe_unused stm32_omm_suspend(struct device *dev)
+{
+	struct stm32_omm *omm = dev_get_drvdata(dev);
+
+	if (omm->restore_omm && omm->cr & CR_MUXEN)
+		stm32_omm_toggle_child_clock(dev, false);
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int __maybe_unused stm32_omm_resume(struct device *dev)
+{
+	struct stm32_omm *omm = dev_get_drvdata(dev);
+	int ret;
+
+	pinctrl_pm_select_default_state(dev);
+
+	if (!omm->restore_omm)
+		return 0;
+
+	/* Ensure both OSPI instance are disabled before configuring OMM */
+	ret = stm32_omm_disable_child(dev);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
+		return ret;
+
+	writel_relaxed(omm->cr, omm->io_base + OMM_CR);
+	ret = stm32_omm_set_amcr(dev, true);
+	pm_runtime_put_sync_suspend(dev);
+	if (ret)
+		return ret;
+
+	if (omm->cr & CR_MUXEN)
+		ret = stm32_omm_toggle_child_clock(dev, true);
+
+	return ret;
+}
+
+static const struct dev_pm_ops stm32_omm_pm_ops = {
+	SET_RUNTIME_PM_OPS(stm32_omm_runtime_suspend,
+			   stm32_omm_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(stm32_omm_suspend, stm32_omm_resume)
+};
+
+static struct platform_driver stm32_omm_driver = {
+	.probe	= stm32_omm_probe,
+	.remove = stm32_omm_remove,
+	.driver	= {
+		.name = "stm32-omm",
+		.of_match_table = stm32_omm_of_match,
+		.pm = &stm32_omm_pm_ops,
+	},
+};
+module_platform_driver(stm32_omm_driver);
+
+MODULE_DESCRIPTION("STMicroelectronics Octo Memory Manager driver");
+MODULE_LICENSE("GPL");

linux-7.2.3/drivers/memory/tegra/Kconfig

@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config TEGRA_MC
+	bool "NVIDIA Tegra Memory Controller support"
+	default ARCH_TEGRA
+	depends on ARCH_TEGRA || (COMPILE_TEST && COMMON_CLK)
+	select INTERCONNECT
+	help
+	  This driver supports the Memory Controller (MC) hardware found on
+	  NVIDIA Tegra SoCs.
+
+if TEGRA_MC
+
+config TEGRA20_EMC
+	tristate "NVIDIA Tegra20 External Memory Controller driver"
+	default ARCH_TEGRA_2x_SOC
+	depends on ARCH_TEGRA_2x_SOC || COMPILE_TEST
+	select DEVFREQ_GOV_SIMPLE_ONDEMAND
+	select PM_DEVFREQ
+	select DDR
+	select TEGRA_EMC_COMMON
+	help
+	  This driver is for the External Memory Controller (EMC) found on
+	  Tegra20 chips. The EMC controls the external DRAM on the board.
+	  This driver is required to change memory timings / clock rate for
+	  external memory.
+
+config TEGRA30_EMC
+	tristate "NVIDIA Tegra30 External Memory Controller driver"
+	default ARCH_TEGRA_3x_SOC
+	depends on ARCH_TEGRA_3x_SOC || COMPILE_TEST
+	select PM_OPP
+	select DDR
+	select TEGRA_EMC_COMMON
+	help
+	  This driver is for the External Memory Controller (EMC) found on
+	  Tegra30 chips. The EMC controls the external DRAM on the board.
+	  This driver is required to change memory timings / clock rate for
+	  external memory.
+
+config TEGRA114_EMC
+	tristate "NVIDIA Tegra114 External Memory Controller driver"
+	default ARCH_TEGRA_114_SOC
+	depends on ARCH_TEGRA_114_SOC || COMPILE_TEST
+	select TEGRA124_CLK_EMC if ARCH_TEGRA
+	select PM_OPP
+	select TEGRA_EMC_COMMON
+	help
+	  This driver is for the External Memory Controller (EMC) found on
+	  Tegra114 chips. The EMC controls the external DRAM on the board.
+	  This driver is required to change memory timings / clock rate for
+	  external memory.
+
+config TEGRA124_EMC
+	tristate "NVIDIA Tegra124 External Memory Controller driver"
+	default ARCH_TEGRA_124_SOC
+	depends on ARCH_TEGRA_124_SOC || COMPILE_TEST
+	select TEGRA124_CLK_EMC if ARCH_TEGRA
+	select PM_OPP
+	select TEGRA_EMC_COMMON
+	help
+	  This driver is for the External Memory Controller (EMC) found on
+	  Tegra124 chips. The EMC controls the external DRAM on the board.
+	  This driver is required to change memory timings / clock rate for
+	  external memory.
+
+config TEGRA210_EMC_TABLE
+	bool
+	depends on ARCH_TEGRA_210_SOC || COMPILE_TEST
+
+config TEGRA210_EMC
+	tristate "NVIDIA Tegra210 External Memory Controller driver"
+	depends on ARCH_TEGRA_210_SOC || COMPILE_TEST
+	select TEGRA210_EMC_TABLE
+	help
+	  This driver is for the External Memory Controller (EMC) found on
+	  Tegra210 chips. The EMC controls the external DRAM on the board.
+	  This driver is required to change memory timings / clock rate for
+	  external memory.
+
+config TEGRA_EMC_COMMON
+	tristate
+
+endif

linux-7.2.3/drivers/memory/tegra/Makefile

@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+tegra-mc-y := mc.o
+
+tegra-mc-$(CONFIG_ARCH_TEGRA_2x_SOC)  += tegra20.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_3x_SOC)  += tegra30.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra124.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra186.o tegra194.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra186.o tegra234.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_238_SOC) += tegra186.o tegra234.o tegra238.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_264_SOC) += tegra186.o tegra264.o
+
+obj-$(CONFIG_TEGRA_MC) += tegra-mc.o
+
+obj-$(CONFIG_TEGRA_EMC_COMMON) += tegra-emc-common.o
+obj-$(CONFIG_TEGRA20_EMC)  += tegra20-emc.o
+obj-$(CONFIG_TEGRA30_EMC)  += tegra30-emc.o
+obj-$(CONFIG_TEGRA114_EMC) += tegra114-emc.o
+obj-$(CONFIG_TEGRA124_EMC) += tegra124-emc.o
+obj-$(CONFIG_TEGRA210_EMC_TABLE) += tegra210-emc-table.o
+obj-$(CONFIG_TEGRA210_EMC) += tegra210-emc.o
+obj-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-emc.o
+obj-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra186-emc.o
+obj-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra186-emc.o
+obj-$(CONFIG_ARCH_TEGRA_264_SOC) += tegra186-emc.o
+
+tegra210-emc-y := tegra210-emc-core.o tegra210-emc-cc-r21021.o

linux-7.2.3/drivers/memory/tegra/mc.h

@@ -0,0 +1,285 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-2026 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef MEMORY_TEGRA_MC_H
+#define MEMORY_TEGRA_MC_H
+
+#include <linux/bits.h>
+#include <linux/io.h>
+#include <linux/types.h>
+
+#include <soc/tegra/mc.h>
+
+#define MC_INTSTATUS					0x00
+/* Bit field of MC_INTSTATUS register */
+#define MC_INT_DECERR_EMEM				BIT(6)
+#define MC_INT_INVALID_GART_PAGE			BIT(7)
+#define MC_INT_SECURITY_VIOLATION			BIT(8)
+#define MC_INT_ARBITRATION_EMEM				BIT(9)
+#define MC_INT_INVALID_SMMU_PAGE			BIT(10)
+#define MC_INT_INVALID_APB_ASID_UPDATE			BIT(11)
+#define MC_INT_DECERR_VPR				BIT(12)
+#define MC_INT_SECERR_SEC				BIT(13)
+#define MC_INT_DECERR_MTS				BIT(16)
+#define MC_INT_DECERR_GENERALIZED_CARVEOUT		BIT(17)
+#define MC_INT_DECERR_ROUTE_SANITY			BIT(20)
+#define MC_INT_DECERR_ROUTE_SANITY_GIC_MSI		BIT(21)
+
+#define MC_INTMASK					0x04
+#define MC_GART_ERROR_REQ				0x30
+#define MC_EMEM_ADR_CFG					0x54
+#define MC_EMEM_ADR_CFG_EMEM_NUMDEV			BIT(0)
+
+#define MC_DECERR_EMEM_OTHERS_STATUS			0x58
+#define MC_SECURITY_VIOLATION_STATUS			0x74
+#define MC_EMEM_ARB_CFG					0x90
+#define MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE(x)		((x) & 0x1ff)
+#define MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE_MASK		0x1ff
+
+#define MC_EMEM_ARB_OUTSTANDING_REQ			0x94
+#define MC_EMEM_ARB_OUTSTANDING_REQ_HOLDOFF_OVERRIDE	BIT(30)
+#define MC_EMEM_ARB_OUTSTANDING_REQ_LIMIT_ENABLE	BIT(31)
+#define MC_EMEM_ARB_OUTSTANDING_REQ_MAX_MASK		0x1ff
+
+#define MC_EMEM_ARB_TIMING_RCD				0x98
+#define MC_EMEM_ARB_TIMING_RP				0x9c
+#define MC_EMEM_ARB_TIMING_RC				0xa0
+#define MC_EMEM_ARB_TIMING_RAS				0xa4
+#define MC_EMEM_ARB_TIMING_FAW				0xa8
+#define MC_EMEM_ARB_TIMING_RRD				0xac
+#define MC_EMEM_ARB_TIMING_RAP2PRE			0xb0
+#define MC_EMEM_ARB_TIMING_WAP2PRE			0xb4
+#define MC_EMEM_ARB_TIMING_R2R				0xb8
+#define MC_EMEM_ARB_TIMING_W2W				0xbc
+#define MC_EMEM_ARB_TIMING_R2W				0xc0
+#define MC_EMEM_ARB_TIMING_W2R				0xc4
+#define MC_EMEM_ARB_MISC2				0xc8
+#define MC_EMEM_ARB_DA_TURNS				0xd0
+#define MC_EMEM_ARB_DA_COVERS				0xd4
+#define MC_EMEM_ARB_MISC0				0xd8
+#define MC_EMEM_ARB_MISC1				0xdc
+#define MC_EMEM_ARB_RING1_THROTTLE			0xe0
+#define MC_EMEM_ARB_OVERRIDE				0xe8
+#define MC_EMEM_ARB_OVERRIDE_EACK_MASK			0x3
+
+#define MC_TIMING_CONTROL_DBG				0xf8
+#define MC_TIMING_CONTROL				0xfc
+#define MC_TIMING_UPDATE				BIT(0)
+
+#define MC_GLOBAL_INTSTATUS				0xf24
+
+/* Bit field of MC_ERR_STATUS_0 register */
+#define MC_ERR_STATUS_RW				BIT(16)
+#define MC_ERR_STATUS_SECURITY				BIT(17)
+#define MC_ERR_STATUS_NONSECURE				BIT(25)
+#define MC_ERR_STATUS_WRITABLE				BIT(26)
+#define MC_ERR_STATUS_READABLE				BIT(27)
+
+#define MC_ERR_STATUS_GSC_ADR_HI_MASK			0xffff
+#define MC_ERR_STATUS_GSC_ADR_HI_SHIFT			16
+#define MC_ERR_STATUS_RT_ADR_HI_SHIFT			15
+
+#define MC_ERR_STATUS_TYPE_SHIFT			28
+#define MC_ERR_STATUS_TYPE_INVALID_SMMU_PAGE		(0x6 << 28)
+#define MC_ERR_STATUS_RT_TYPE_MASK			(0xf << 28)
+#define MC_ERR_STATUS_RT_TYPE_SHIFT			28
+
+#define MC_ERR_STATUS_ADR_HI_SHIFT			20
+
+#define MC_BROADCAST_CHANNEL				~0
+
+/* Tegra264 specific registers */
+
+/* Registers for MSS HUB */
+#define MSS_HUB_GLOBAL_INTSTATUS_0			0x6000
+#define MSS_HUBC_INTR					BIT(0)
+#define MSS_HUB_GLOBAL_MASK				0x7F00
+#define MSS_HUB_GLOBAL_SHIFT				8
+
+#define MSS_HUB_HUBC_INTSTATUS_0			0x6008
+#define MSS_HUB_INTRSTATUS_0				0x600c
+#define MSS_HUB_HUBC_INTMASK_0				0x6010
+#define MSS_HUB_HUBC_SCRUB_DONE_INTMASK			BIT(0)
+
+#define MSS_HUB_HUBC_INTPRIORITY_0			0x6014
+#define MSS_HUB_INTRMASK_0				0x6018
+#define MSS_HUB_COALESCER_ERR_INTMASK			BIT(0)
+#define MSS_HUB_SMMU_BYPASS_ALLOW_ERR_INTMASK		BIT(1)
+#define MSS_HUB_ILLEGAL_TBUGRP_ID_INTMASK		BIT(2)
+#define MSS_HUB_MSI_ERR_INTMASK				BIT(3)
+#define MSS_HUB_POISON_RSP_INTMASK			BIT(4)
+#define MSS_HUB_RESTRICTED_ACCESS_ERR_INTMASK		BIT(5)
+#define MSS_HUB_RESERVED_PA_ERR_INTMASK			BIT(6)
+
+#define MSS_HUB_INTRPRIORITY_0				0x601c
+#define MSS_HUB_SMMU_BYPASS_ALLOW_ERR_STATUS_0		0x6020
+#define MSS_HUB_MSI_ERR_STATUS_0			0x6024
+#define MSS_HUB_POISON_RSP_STATUS_0			0x6028
+#define MSS_HUB_COALESCE_ERR_STATUS_0			0x60e0
+#define MSS_HUB_COALESCE_ERR_ADR_HI_0			0x60e4
+#define MSS_HUB_COALESCE_ERR_ADR_0			0x60e8
+#define MSS_HUB_RESTRICTED_ACCESS_ERR_STATUS_0		0x638c
+#define MSS_HUB_RESERVED_PA_ERR_STATUS_0		0x6390
+#define MSS_HUB_ILLEGAL_TBUGRP_ID_ERR_STATUS_0		0x63b0
+
+/* Registers for channels */
+#define MC_CH_INTSTATUS_0				0x82d4
+#define MC_CH_INTMASK_0					0x82d8
+#define WCAM_ERR_INTMASK				BIT(19)
+
+#define MC_ERR_GENERALIZED_CARVEOUT_STATUS_1_0		0xbc74
+
+/* Registers for MCF */
+#define MCF_COMMON_INTSTATUS0_0_0			0xce04
+#define MCF_INTSTATUS_0					0xce2c
+#define MCF_INTMASK_0					0xce30
+#define MCF_INTPRIORITY_0				0xce34
+
+/* Registers for SBS */
+#define MSS_SBS_INTSTATUS_0				0xec08
+#define MSS_SBS_INTMASK_0				0xec0c
+#define MSS_SBS_FILL_FIFO_ISO_OVERFLOW_INTMASK		BIT(0)
+#define MSS_SBS_FILL_FIFO_SISO_OVERFLOW_INTMASK		BIT(1)
+#define MSS_SBS_FILL_FIFO_NISO_OVERFLOW_INTMASK		BIT(2)
+
+/* Bit field of MC_ERR_ROUTE_SANITY_STATUS_0 register */
+#define MC_ERR_ROUTE_SANITY_RW				BIT(12)
+#define MC_ERR_ROUTE_SANITY_SEC				BIT(13)
+
+#define ERR_GENERALIZED_APERTURE_ID_SHIFT		0
+#define ERR_GENERALIZED_APERTURE_ID_MASK		0x1F
+#define ERR_GENERALIZED_CARVEOUT_APERTURE_ID_SHIFT	5
+#define ERR_GENERALIZED_CARVEOUT_APERTURE_ID_MASK	0x1F
+
+static inline u32 tegra_mc_scale_percents(u64 val, unsigned int percents)
+{
+	val = val * percents;
+	do_div(val, 100);
+
+	return min_t(u64, val, U32_MAX);
+}
+
+static inline struct tegra_mc *
+icc_provider_to_tegra_mc(struct icc_provider *provider)
+{
+	return container_of(provider, struct tegra_mc, provider);
+}
+
+static inline u32 mc_ch_readl(const struct tegra_mc *mc, int ch,
+			      unsigned long offset)
+{
+	if (!mc->bcast_ch_regs)
+		return 0;
+
+	if (ch == MC_BROADCAST_CHANNEL)
+		return readl_relaxed(mc->bcast_ch_regs + offset);
+
+	return readl_relaxed(mc->ch_regs[ch] + offset);
+}
+
+static inline void mc_ch_writel(const struct tegra_mc *mc, int ch,
+				u32 value, unsigned long offset)
+{
+	if (!mc->bcast_ch_regs)
+		return;
+
+	if (ch == MC_BROADCAST_CHANNEL)
+		writel_relaxed(value, mc->bcast_ch_regs + offset);
+	else
+		writel_relaxed(value, mc->ch_regs[ch] + offset);
+}
+
+static inline u32 mc_readl(const struct tegra_mc *mc, unsigned long offset)
+{
+	return readl_relaxed(mc->regs + offset);
+}
+
+static inline void mc_writel(const struct tegra_mc *mc, u32 value,
+			     unsigned long offset)
+{
+	writel_relaxed(value, mc->regs + offset);
+}
+
+extern const struct tegra_mc_reset_ops tegra_mc_reset_ops_common;
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+extern const struct tegra_mc_soc tegra20_mc_soc;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+extern const struct tegra_mc_soc tegra30_mc_soc;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+extern const struct tegra_mc_soc tegra114_mc_soc;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_124_SOC
+extern const struct tegra_mc_soc tegra124_mc_soc;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_132_SOC
+extern const struct tegra_mc_soc tegra132_mc_soc;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_210_SOC
+extern const struct tegra_mc_soc tegra210_mc_soc;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_186_SOC
+extern const struct tegra_mc_soc tegra186_mc_soc;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_194_SOC
+extern const struct tegra_mc_soc tegra194_mc_soc;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_234_SOC
+extern const struct tegra_mc_soc tegra234_mc_soc;
+#endif
+
+#if defined(CONFIG_ARCH_TEGRA_234_SOC) || defined(CONFIG_ARCH_TEGRA_238_SOC)
+extern const struct tegra_mc_icc_ops tegra234_mc_icc_ops;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_238_SOC
+extern const struct tegra_mc_soc tegra238_mc_soc;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_264_SOC
+extern const struct tegra_mc_soc tegra264_mc_soc;
+#endif
+
+#if defined(CONFIG_ARCH_TEGRA_3x_SOC) || \
+    defined(CONFIG_ARCH_TEGRA_114_SOC) || \
+    defined(CONFIG_ARCH_TEGRA_124_SOC) || \
+    defined(CONFIG_ARCH_TEGRA_132_SOC) || \
+    defined(CONFIG_ARCH_TEGRA_210_SOC)
+int tegra30_mc_probe(struct tegra_mc *mc);
+extern const struct tegra_mc_ops tegra30_mc_ops;
+#endif
+
+#if defined(CONFIG_ARCH_TEGRA_186_SOC) || \
+    defined(CONFIG_ARCH_TEGRA_194_SOC) || \
+    defined(CONFIG_ARCH_TEGRA_234_SOC) || \
+    defined(CONFIG_ARCH_TEGRA_238_SOC) || \
+    defined(CONFIG_ARCH_TEGRA_264_SOC)
+extern const struct tegra_mc_ops tegra186_mc_ops;
+#endif
+
+irqreturn_t tegra30_mc_handle_irq(int irq, void *data);
+extern const irq_handler_t tegra30_mc_irq_handlers[1];
+extern const char * const tegra_mc_status_names[32];
+extern const char * const tegra20_mc_error_names[8];
+
+/*
+ * These IDs are for internal use of Tegra ICC drivers. The ID numbers are
+ * chosen such that they don't conflict with the device-tree ICC node IDs.
+ */
+#define TEGRA_ICC_MC		1000
+#define TEGRA_ICC_EMC		1001
+#define TEGRA_ICC_EMEM		1002
+
+#endif /* MEMORY_TEGRA_MC_H */

linux-7.2.3/drivers/memory/tegra/tegra-emc-common.c

@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm_opp.h>
+
+#include "tegra-emc-common.h"
+
+/**
+ * tegra_emc_rate_requests_init() - Initialize EMC rate request tracking
+ * @reqs: struct tegra_emc_rate_requests to initialize.
+ * @dev: EMC device.
+ *
+ * Initializes the rate request tracking state with default state
+ * (no active requests). Must be called before using @reqs with
+ * other functions.
+ */
+void tegra_emc_rate_requests_init(struct tegra_emc_rate_requests *reqs,
+				  struct device *dev)
+{
+	unsigned int i;
+
+	mutex_init(&reqs->rate_lock);
+	reqs->dev = dev;
+
+	for (i = 0; i < TEGRA_EMC_RATE_TYPE_MAX; i++) {
+		reqs->requested_rate[i].min_rate = 0;
+		reqs->requested_rate[i].max_rate = ULONG_MAX;
+	}
+}
+EXPORT_SYMBOL_GPL(tegra_emc_rate_requests_init);
+
+/* Caller must hold reqs->rate_lock. */
+static int tegra_emc_request_rate(struct tegra_emc_rate_requests *reqs,
+				  unsigned long new_min_rate,
+				  unsigned long new_max_rate,
+				  enum tegra_emc_rate_request_type type)
+{
+	struct tegra_emc_rate_request *req = reqs->requested_rate;
+	unsigned long min_rate = 0, max_rate = ULONG_MAX;
+	unsigned int i;
+	int err;
+
+	lockdep_assert_held(&reqs->rate_lock);
+
+	/* select minimum and maximum rates among the requested rates */
+	for (i = 0; i < TEGRA_EMC_RATE_TYPE_MAX; i++, req++) {
+		if (i == type) {
+			min_rate = max(new_min_rate, min_rate);
+			max_rate = min(new_max_rate, max_rate);
+		} else {
+			min_rate = max(req->min_rate, min_rate);
+			max_rate = min(req->max_rate, max_rate);
+		}
+	}
+
+	if (min_rate > max_rate) {
+		dev_err_ratelimited(reqs->dev, "%s: type %u: out of range: %lu %lu\n",
+				    __func__, type, min_rate, max_rate);
+		return -ERANGE;
+	}
+
+	/*
+	 * EMC rate-changes should go via OPP API because it manages voltage
+	 * changes.
+	 */
+	err = dev_pm_opp_set_rate(reqs->dev, min_rate);
+	if (err)
+		return err;
+
+	reqs->requested_rate[type].min_rate = new_min_rate;
+	reqs->requested_rate[type].max_rate = new_max_rate;
+
+	return 0;
+}
+
+/**
+ * tegra_emc_set_min_rate() - Update minimum rate request for a request type
+ * @reqs: rate request tracking state
+ * @rate: new minimum rate in Hz requested by @type
+ * @type: type of request
+ *
+ * Records @rate as the new minimum rate request for @type, recalculates target
+ * rate based on all requests and applies new rate through the OPP API.
+ *
+ * Context: Sleeps. Requests to same @reqs are synchronized via mutex.
+ *
+ * Return:
+ * * %0 - success
+ * * %-ERANGE - request would cause minimum rate request to be higher than
+ *              maximum rate request
+ * * other - setting new rate failed
+ */
+int tegra_emc_set_min_rate(struct tegra_emc_rate_requests *reqs,
+			   unsigned long rate,
+			   enum tegra_emc_rate_request_type type)
+{
+	struct tegra_emc_rate_request *req = &reqs->requested_rate[type];
+	int ret;
+
+	mutex_lock(&reqs->rate_lock);
+	ret = tegra_emc_request_rate(reqs, rate, req->max_rate, type);
+	mutex_unlock(&reqs->rate_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tegra_emc_set_min_rate);
+
+/**
+ * tegra_emc_set_max_rate() - Update maximum rate request for a request type
+ * @reqs: rate request tracking state
+ * @rate: new maximum rate in Hz requested by @type
+ * @type: type of request
+ *
+ * Records @rate as the new maximum rate request for @type, recalculates target
+ * rate based on all requests and applies new rate through the OPP API.
+ *
+ * Context: Sleeps. Requests to same @reqs are synchronized via mutex.
+ *
+ * Return:
+ * * %0 - success
+ * * %-ERANGE - request would cause minimum rate request to be higher than
+ *              maximum rate request
+ * * other - setting new rate failed
+ */
+int tegra_emc_set_max_rate(struct tegra_emc_rate_requests *reqs,
+			   unsigned long rate,
+			   enum tegra_emc_rate_request_type type)
+{
+	struct tegra_emc_rate_request *req = &reqs->requested_rate[type];
+	int ret;
+
+	mutex_lock(&reqs->rate_lock);
+	ret = tegra_emc_request_rate(reqs, req->min_rate, rate, type);
+	mutex_unlock(&reqs->rate_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tegra_emc_set_max_rate);
+
+MODULE_DESCRIPTION("NVIDIA Tegra EMC common code");
+MODULE_LICENSE("GPL");

linux-7.2.3/drivers/memory/tegra/tegra-emc-common.h

@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef TEGRA_EMC_COMMON_H
+#define TEGRA_EMC_COMMON_H
+
+#include <linux/device.h>
+#include <linux/mutex.h>
+
+/**
+ * enum tegra_emc_rate_request_type - source of rate request
+ * @TEGRA_EMC_RATE_DEVFREQ: rate requested by devfreq governor
+ * @TEGRA_EMC_RATE_DEBUG: rate requested through debugfs knobs
+ * @TEGRA_EMC_RATE_ICC: rate requested by ICC framework
+ * @TEGRA_EMC_RATE_TYPE_MAX: number of valid request types
+ */
+enum tegra_emc_rate_request_type {
+	TEGRA_EMC_RATE_DEVFREQ,
+	TEGRA_EMC_RATE_DEBUG,
+	TEGRA_EMC_RATE_ICC,
+	TEGRA_EMC_RATE_TYPE_MAX,
+};
+
+struct tegra_emc_rate_request {
+	unsigned long min_rate;
+	unsigned long max_rate;
+};
+
+struct tegra_emc_rate_requests {
+	struct tegra_emc_rate_request requested_rate[TEGRA_EMC_RATE_TYPE_MAX];
+	/* Protects @requested_rate. */
+	struct mutex rate_lock;
+	struct device *dev;
+};
+
+void tegra_emc_rate_requests_init(struct tegra_emc_rate_requests *reqs,
+				  struct device *dev);
+
+int tegra_emc_set_min_rate(struct tegra_emc_rate_requests *reqs,
+			   unsigned long rate,
+			   enum tegra_emc_rate_request_type type);
+
+int tegra_emc_set_max_rate(struct tegra_emc_rate_requests *reqs,
+			   unsigned long rate,
+			   enum tegra_emc_rate_request_type type);
+
+#endif /* TEGRA_EMC_COMMON_H */

linux-7.2.3/drivers/memory/tegra/tegra186-emc.c

@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019-2025 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include <soc/tegra/bpmp.h>
+#include "mc.h"
+
+struct tegra186_emc_dvfs {
+	unsigned long latency;
+	unsigned long rate;
+};
+
+struct tegra186_emc {
+	struct tegra_bpmp *bpmp;
+	struct device *dev;
+	struct clk *clk;
+	struct clk *clk_dbb;
+
+	struct tegra186_emc_dvfs *dvfs;
+	unsigned int num_dvfs;
+
+	struct {
+		struct dentry *root;
+		unsigned long min_rate;
+		unsigned long max_rate;
+	} debugfs;
+
+	struct icc_provider provider;
+};
+
+/*
+ * debugfs interface
+ *
+ * The memory controller driver exposes some files in debugfs that can be used
+ * to control the EMC frequency. The top-level directory can be found here:
+ *
+ *   /sys/kernel/debug/emc
+ *
+ * It contains the following files:
+ *
+ *   - available_rates: This file contains a list of valid, space-separated
+ *     EMC frequencies.
+ *
+ *   - min_rate: Writing a value to this file sets the given frequency as the
+ *       floor of the permitted range. If this is higher than the currently
+ *       configured EMC frequency, this will cause the frequency to be
+ *       increased so that it stays within the valid range.
+ *
+ *   - max_rate: Similarily to the min_rate file, writing a value to this file
+ *       sets the given frequency as the ceiling of the permitted range. If
+ *       the value is lower than the currently configured EMC frequency, this
+ *       will cause the frequency to be decreased so that it stays within the
+ *       valid range.
+ */
+
+static bool tegra186_emc_validate_rate(struct tegra186_emc *emc,
+				       unsigned long rate)
+{
+	unsigned int i;
+
+	for (i = 0; i < emc->num_dvfs; i++)
+		if (rate == emc->dvfs[i].rate)
+			return true;
+
+	return false;
+}
+
+static int tegra186_emc_debug_available_rates_show(struct seq_file *s,
+						   void *data)
+{
+	struct tegra186_emc *emc = s->private;
+	const char *prefix = "";
+	unsigned int i;
+
+	for (i = 0; i < emc->num_dvfs; i++) {
+		seq_printf(s, "%s%lu", prefix, emc->dvfs[i].rate);
+		prefix = " ";
+	}
+
+	seq_puts(s, "\n");
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(tegra186_emc_debug_available_rates);
+
+static int tegra186_emc_debug_min_rate_get(void *data, u64 *rate)
+{
+	struct tegra186_emc *emc = data;
+
+	*rate = emc->debugfs.min_rate;
+
+	return 0;
+}
+
+static int tegra186_emc_debug_min_rate_set(void *data, u64 rate)
+{
+	struct tegra186_emc *emc = data;
+	int err;
+
+	if (!tegra186_emc_validate_rate(emc, rate))
+		return -EINVAL;
+
+	err = clk_set_min_rate(emc->clk, rate);
+	if (err < 0)
+		return err;
+
+	emc->debugfs.min_rate = rate;
+
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(tegra186_emc_debug_min_rate_fops,
+			  tegra186_emc_debug_min_rate_get,
+			  tegra186_emc_debug_min_rate_set, "%llu\n");
+
+static int tegra186_emc_debug_max_rate_get(void *data, u64 *rate)
+{
+	struct tegra186_emc *emc = data;
+
+	*rate = emc->debugfs.max_rate;
+
+	return 0;
+}
+
+static int tegra186_emc_debug_max_rate_set(void *data, u64 rate)
+{
+	struct tegra186_emc *emc = data;
+	int err;
+
+	if (!tegra186_emc_validate_rate(emc, rate))
+		return -EINVAL;
+
+	err = clk_set_max_rate(emc->clk, rate);
+	if (err < 0)
+		return err;
+
+	emc->debugfs.max_rate = rate;
+
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(tegra186_emc_debug_max_rate_fops,
+			  tegra186_emc_debug_max_rate_get,
+			  tegra186_emc_debug_max_rate_set, "%llu\n");
+
+static int tegra186_emc_get_emc_dvfs_latency(struct tegra186_emc *emc)
+{
+	struct mrq_emc_dvfs_latency_response response;
+	struct tegra_bpmp_message msg;
+	unsigned int i;
+	int err;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.mrq = MRQ_EMC_DVFS_LATENCY;
+	msg.tx.data = NULL;
+	msg.tx.size = 0;
+	msg.rx.data = &response;
+	msg.rx.size = sizeof(response);
+
+	err = tegra_bpmp_transfer(emc->bpmp, &msg);
+	if (err < 0) {
+		dev_err(emc->dev, "failed to EMC DVFS pairs: %d\n", err);
+		return err;
+	}
+	if (msg.rx.ret < 0) {
+		dev_err(emc->dev, "EMC DVFS MRQ failed: %d (BPMP error code)\n", msg.rx.ret);
+		return -EINVAL;
+	}
+
+	emc->debugfs.min_rate = ULONG_MAX;
+	emc->debugfs.max_rate = 0;
+
+	emc->num_dvfs = response.num_pairs;
+
+	emc->dvfs = devm_kmalloc_array(emc->dev, emc->num_dvfs, sizeof(*emc->dvfs), GFP_KERNEL);
+	if (!emc->dvfs)
+		return -ENOMEM;
+
+	dev_dbg(emc->dev, "%u DVFS pairs:\n", emc->num_dvfs);
+
+	for (i = 0; i < emc->num_dvfs; i++) {
+		emc->dvfs[i].rate = response.pairs[i].freq * 1000;
+		emc->dvfs[i].latency = response.pairs[i].latency;
+
+		if (emc->dvfs[i].rate < emc->debugfs.min_rate)
+			emc->debugfs.min_rate = emc->dvfs[i].rate;
+
+		if (emc->dvfs[i].rate > emc->debugfs.max_rate)
+			emc->debugfs.max_rate = emc->dvfs[i].rate;
+
+		dev_dbg(emc->dev, "  %2u: %lu Hz -> %lu us\n", i,
+			emc->dvfs[i].rate, emc->dvfs[i].latency);
+	}
+
+	err = clk_set_rate_range(emc->clk, emc->debugfs.min_rate, emc->debugfs.max_rate);
+	if (err < 0) {
+		dev_err(emc->dev, "failed to set rate range [%lu-%lu] for %pC\n",
+			emc->debugfs.min_rate, emc->debugfs.max_rate, emc->clk);
+		return err;
+	}
+
+	emc->debugfs.root = debugfs_create_dir("emc", NULL);
+	debugfs_create_file("available_rates", 0444, emc->debugfs.root, emc,
+			    &tegra186_emc_debug_available_rates_fops);
+	debugfs_create_file("min_rate", 0644, emc->debugfs.root, emc,
+			    &tegra186_emc_debug_min_rate_fops);
+	debugfs_create_file("max_rate", 0644, emc->debugfs.root, emc,
+			    &tegra186_emc_debug_max_rate_fops);
+
+	return 0;
+}
+
+/*
+ * tegra186_emc_icc_set_bw() - Set BW api for EMC provider
+ * @src: ICC node for External Memory Controller (EMC)
+ * @dst: ICC node for External Memory (DRAM)
+ *
+ * Do nothing here as info to BPMP-FW is now passed in the BW set function
+ * of the MC driver. BPMP-FW sets the final Freq based on the passed values.
+ */
+static int tegra186_emc_icc_set_bw(struct icc_node *src, struct icc_node *dst)
+{
+	return 0;
+}
+
+static struct icc_node *
+tegra186_emc_of_icc_xlate(const struct of_phandle_args *spec, void *data)
+{
+	struct icc_provider *provider = data;
+	struct icc_node *node;
+
+	/* External Memory is the only possible ICC route */
+	list_for_each_entry(node, &provider->nodes, node_list) {
+		if (node->id != TEGRA_ICC_EMEM)
+			continue;
+
+		return node;
+	}
+
+	return ERR_PTR(-EPROBE_DEFER);
+}
+
+static int tegra186_emc_icc_get_init_bw(struct icc_node *node, u32 *avg, u32 *peak)
+{
+	*avg = 0;
+	*peak = 0;
+
+	return 0;
+}
+
+static int tegra186_emc_interconnect_init(struct tegra186_emc *emc)
+{
+	struct icc_node *node;
+	int err;
+
+	emc->provider.dev = emc->dev;
+	emc->provider.set = tegra186_emc_icc_set_bw;
+	emc->provider.data = &emc->provider;
+	emc->provider.aggregate = icc_std_aggregate;
+	emc->provider.xlate = tegra186_emc_of_icc_xlate;
+	emc->provider.get_bw = tegra186_emc_icc_get_init_bw;
+
+	icc_provider_init(&emc->provider);
+
+	/* create External Memory Controller node */
+	node = icc_node_create(TEGRA_ICC_EMC);
+	if (IS_ERR(node))
+		return PTR_ERR(node);
+
+	node->name = "External Memory Controller";
+	icc_node_add(node, &emc->provider);
+
+	/* link External Memory Controller to External Memory (DRAM) */
+	err = icc_link_create(node, TEGRA_ICC_EMEM);
+	if (err)
+		goto remove_nodes;
+
+	/* create External Memory node */
+	node = icc_node_create(TEGRA_ICC_EMEM);
+	if (IS_ERR(node)) {
+		err = PTR_ERR(node);
+		goto remove_nodes;
+	}
+
+	node->name = "External Memory (DRAM)";
+	icc_node_add(node, &emc->provider);
+
+	err = icc_provider_register(&emc->provider);
+	if (err)
+		goto remove_nodes;
+
+	return 0;
+
+remove_nodes:
+	icc_nodes_remove(&emc->provider);
+
+	return dev_err_probe(emc->dev, err, "failed to initialize ICC\n");
+}
+
+static int tegra186_emc_probe(struct platform_device *pdev)
+{
+	struct tegra_mc *mc = dev_get_drvdata(pdev->dev.parent);
+	struct tegra186_emc *emc;
+	int err;
+
+	emc = devm_kzalloc(&pdev->dev, sizeof(*emc), GFP_KERNEL);
+	if (!emc)
+		return -ENOMEM;
+
+	emc->bpmp = tegra_bpmp_get(&pdev->dev);
+	if (IS_ERR(emc->bpmp))
+		return dev_err_probe(&pdev->dev, PTR_ERR(emc->bpmp),
+				     "failed to get BPMP\n");
+
+	emc->clk = devm_clk_get(&pdev->dev, "emc");
+	if (IS_ERR(emc->clk)) {
+		err = dev_err_probe(&pdev->dev, PTR_ERR(emc->clk),
+				    "failed to get EMC clock\n");
+		goto put_bpmp;
+	}
+
+	emc->clk_dbb = devm_clk_get_optional_enabled(&pdev->dev, "dbb");
+	if (IS_ERR(emc->clk_dbb)) {
+		err = dev_err_probe(&pdev->dev, PTR_ERR(emc->clk_dbb),
+				    "failed to get DBB clock\n");
+		goto put_bpmp;
+	}
+
+	platform_set_drvdata(pdev, emc);
+	emc->dev = &pdev->dev;
+
+	if (tegra_bpmp_mrq_is_supported(emc->bpmp, MRQ_EMC_DVFS_LATENCY)) {
+		err = tegra186_emc_get_emc_dvfs_latency(emc);
+		if (err)
+			goto put_bpmp;
+	}
+
+	if (mc && mc->soc->icc_ops) {
+		if (tegra_bpmp_mrq_is_supported(emc->bpmp, MRQ_BWMGR_INT)) {
+			mc->bwmgr_mrq_supported = true;
+
+			/*
+			 * MC driver probe can't get BPMP reference as it gets probed
+			 * earlier than BPMP. So, save the BPMP ref got from the EMC
+			 * DT node in the mc->bpmp and use it in MC's icc_set hook.
+			 */
+			mc->bpmp = emc->bpmp;
+			barrier();
+		}
+
+		/*
+		 * Initialize the ICC even if BPMP-FW doesn't support 'MRQ_BWMGR_INT'.
+		 * Use the flag 'mc->bwmgr_mrq_supported' within MC driver and return
+		 * EINVAL instead of passing the request to BPMP-FW later when the BW
+		 * request is made by client with 'icc_set_bw()' call.
+		 */
+		err = tegra186_emc_interconnect_init(emc);
+		if (err) {
+			mc->bpmp = NULL;
+			goto put_bpmp;
+		}
+	}
+
+	return 0;
+
+put_bpmp:
+	tegra_bpmp_put(emc->bpmp);
+	return err;
+}
+
+static void tegra186_emc_remove(struct platform_device *pdev)
+{
+	struct tegra_mc *mc = dev_get_drvdata(pdev->dev.parent);
+	struct tegra186_emc *emc = platform_get_drvdata(pdev);
+
+	debugfs_remove_recursive(emc->debugfs.root);
+
+	mc->bpmp = NULL;
+	tegra_bpmp_put(emc->bpmp);
+}
+
+static const struct of_device_id tegra186_emc_of_match[] = {
+#if defined(CONFIG_ARCH_TEGRA_186_SOC)
+	{ .compatible = "nvidia,tegra186-emc" },
+#endif
+#if defined(CONFIG_ARCH_TEGRA_194_SOC)
+	{ .compatible = "nvidia,tegra194-emc" },
+#endif
+#if defined(CONFIG_ARCH_TEGRA_234_SOC)
+	{ .compatible = "nvidia,tegra234-emc" },
+#endif
+#if defined(CONFIG_ARCH_TEGRA_264_SOC)
+	{ .compatible = "nvidia,tegra264-emc" },
+#endif
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, tegra186_emc_of_match);
+
+static struct platform_driver tegra186_emc_driver = {
+	.driver = {
+		.name = "tegra186-emc",
+		.of_match_table = tegra186_emc_of_match,
+		.suppress_bind_attrs = true,
+		.sync_state = icc_sync_state,
+	},
+	.probe = tegra186_emc_probe,
+	.remove = tegra186_emc_remove,
+};
+module_platform_driver(tegra186_emc_driver);
+
+MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra186 External Memory Controller driver");

linux-7.2.3/drivers/memory/tegra/tegra186.c

@@ -0,0 +1,927 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017-2026 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/io.h>
+#include <linux/iommu.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include <soc/tegra/mc.h>
+
+#if defined(CONFIG_ARCH_TEGRA_186_SOC)
+#include <dt-bindings/memory/tegra186-mc.h>
+#endif
+
+#include "mc.h"
+
+#define MC_SID_STREAMID_OVERRIDE_MASK GENMASK(7, 0)
+#define MC_SID_STREAMID_SECURITY_WRITE_ACCESS_DISABLED BIT(16)
+#define MC_SID_STREAMID_SECURITY_OVERRIDE BIT(8)
+
+static int tegra186_mc_probe(struct tegra_mc *mc)
+{
+	struct platform_device *pdev = to_platform_device(mc->dev);
+	struct resource *res;
+	unsigned int i;
+	char name[8];
+	int err;
+
+	/*
+	 * From Tegra264, the SID region is not present in MC node and BROADCAST is first.
+	 * The common function 'tegra_mc_probe()' already maps first region entry from DT.
+	 * Check if the SID region is present in DT then map BROADCAST. Otherwise, consider
+	 * the first entry mapped in mc probe as the BROADCAST region. This is done to avoid
+	 * mapping the region twice when SID is not present and keep backward compatibility.
+	 */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sid");
+	if (res)
+		mc->bcast_ch_regs = devm_platform_ioremap_resource_byname(pdev, "broadcast");
+	else
+		mc->bcast_ch_regs = mc->regs;
+
+	if (IS_ERR(mc->bcast_ch_regs)) {
+		if (PTR_ERR(mc->bcast_ch_regs) == -EINVAL) {
+			dev_warn(&pdev->dev,
+				 "Broadcast channel is missing, please update your device-tree\n");
+			mc->bcast_ch_regs = NULL;
+			goto populate;
+		}
+
+		return PTR_ERR(mc->bcast_ch_regs);
+	}
+
+	mc->ch_regs = devm_kcalloc(mc->dev, mc->soc->num_channels, sizeof(*mc->ch_regs),
+				   GFP_KERNEL);
+	if (!mc->ch_regs)
+		return -ENOMEM;
+
+	for (i = 0; i < mc->soc->num_channels; i++) {
+		snprintf(name, sizeof(name), "ch%u", i);
+
+		mc->ch_regs[i] = devm_platform_ioremap_resource_byname(pdev, name);
+		if (IS_ERR(mc->ch_regs[i]))
+			return PTR_ERR(mc->ch_regs[i]);
+	}
+
+populate:
+	err = of_platform_populate(mc->dev->of_node, NULL, NULL, mc->dev);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static void tegra186_mc_remove(struct tegra_mc *mc)
+{
+	of_platform_depopulate(mc->dev);
+}
+
+#if IS_ENABLED(CONFIG_IOMMU_API)
+static void tegra186_mc_client_sid_override(struct tegra_mc *mc,
+					    const struct tegra_mc_client *client,
+					    unsigned int sid)
+{
+	u32 value, old;
+
+	if (client->regs.sid.security == 0 && client->regs.sid.override == 0)
+		return;
+
+	value = readl(mc->regs + client->regs.sid.security);
+	if ((value & MC_SID_STREAMID_SECURITY_OVERRIDE) == 0) {
+		/*
+		 * If the secure firmware has locked this down the override
+		 * for this memory client, there's nothing we can do here.
+		 */
+		if (value & MC_SID_STREAMID_SECURITY_WRITE_ACCESS_DISABLED)
+			return;
+
+		/*
+		 * Otherwise, try to set the override itself. Typically the
+		 * secure firmware will never have set this configuration.
+		 * Instead, it will either have disabled write access to
+		 * this field, or it will already have set an explicit
+		 * override itself.
+		 */
+		WARN_ON((value & MC_SID_STREAMID_SECURITY_OVERRIDE) == 0);
+
+		value |= MC_SID_STREAMID_SECURITY_OVERRIDE;
+		writel(value, mc->regs + client->regs.sid.security);
+	}
+
+	value = readl(mc->regs + client->regs.sid.override);
+	old = value & MC_SID_STREAMID_OVERRIDE_MASK;
+
+	if (old != sid) {
+		dev_dbg(mc->dev, "overriding SID %x for %s with %x\n", old,
+			client->name, sid);
+		writel(sid, mc->regs + client->regs.sid.override);
+	}
+}
+#endif
+
+static int tegra186_mc_probe_device(struct tegra_mc *mc, struct device *dev)
+{
+#if IS_ENABLED(CONFIG_IOMMU_API)
+	struct of_phandle_args args;
+	unsigned int i, index = 0;
+	u32 sid;
+
+	if (!tegra_dev_iommu_get_stream_id(dev, &sid))
+		return 0;
+
+	while (!of_parse_phandle_with_args(dev->of_node, "interconnects", "#interconnect-cells",
+					   index, &args)) {
+		if (args.np == mc->dev->of_node && args.args_count != 0) {
+			for (i = 0; i < mc->soc->num_clients; i++) {
+				const struct tegra_mc_client *client = &mc->soc->clients[i];
+
+				if (client->id == args.args[0])
+					tegra186_mc_client_sid_override(
+						mc, client,
+						sid & MC_SID_STREAMID_OVERRIDE_MASK);
+			}
+		}
+
+		index++;
+	}
+#endif
+
+	return 0;
+}
+
+static void tegra186_mc_resume(struct tegra_mc *mc)
+{
+#if IS_ENABLED(CONFIG_IOMMU_API)
+	unsigned int i;
+
+	for (i = 0; i < mc->soc->num_clients; i++) {
+		const struct tegra_mc_client *client = &mc->soc->clients[i];
+
+		tegra186_mc_client_sid_override(mc, client, client->sid);
+	}
+#endif
+}
+
+const struct tegra_mc_ops tegra186_mc_ops = {
+	.probe = tegra186_mc_probe,
+	.remove = tegra186_mc_remove,
+	.resume = tegra186_mc_resume,
+	.probe_device = tegra186_mc_probe_device,
+};
+
+#if defined(CONFIG_ARCH_TEGRA_186_SOC)
+static const struct tegra_mc_client tegra186_mc_clients[] = {
+	{
+		.id = TEGRA186_MEMORY_CLIENT_PTCR,
+		.name = "ptcr",
+		.sid = TEGRA186_SID_PASSTHROUGH,
+		.regs = {
+			.sid = {
+				.override = 0x000,
+				.security = 0x004,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_AFIR,
+		.name = "afir",
+		.sid = TEGRA186_SID_AFI,
+		.regs = {
+			.sid = {
+				.override = 0x070,
+				.security = 0x074,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_HDAR,
+		.name = "hdar",
+		.sid = TEGRA186_SID_HDA,
+		.regs = {
+			.sid = {
+				.override = 0x0a8,
+				.security = 0x0ac,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_HOST1XDMAR,
+		.name = "host1xdmar",
+		.sid = TEGRA186_SID_HOST1X,
+		.regs = {
+			.sid = {
+				.override = 0x0b0,
+				.security = 0x0b4,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_NVENCSRD,
+		.name = "nvencsrd",
+		.sid = TEGRA186_SID_NVENC,
+		.regs = {
+			.sid = {
+				.override = 0x0e0,
+				.security = 0x0e4,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SATAR,
+		.name = "satar",
+		.sid = TEGRA186_SID_SATA,
+		.regs = {
+			.sid = {
+				.override = 0x0f8,
+				.security = 0x0fc,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_MPCORER,
+		.name = "mpcorer",
+		.sid = TEGRA186_SID_PASSTHROUGH,
+		.regs = {
+			.sid = {
+				.override = 0x138,
+				.security = 0x13c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_NVENCSWR,
+		.name = "nvencswr",
+		.sid = TEGRA186_SID_NVENC,
+		.regs = {
+			.sid = {
+				.override = 0x158,
+				.security = 0x15c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_AFIW,
+		.name = "afiw",
+		.sid = TEGRA186_SID_AFI,
+		.regs = {
+			.sid = {
+				.override = 0x188,
+				.security = 0x18c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_HDAW,
+		.name = "hdaw",
+		.sid = TEGRA186_SID_HDA,
+		.regs = {
+			.sid = {
+				.override = 0x1a8,
+				.security = 0x1ac,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_MPCOREW,
+		.name = "mpcorew",
+		.sid = TEGRA186_SID_PASSTHROUGH,
+		.regs = {
+			.sid = {
+				.override = 0x1c8,
+				.security = 0x1cc,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SATAW,
+		.name = "sataw",
+		.sid = TEGRA186_SID_SATA,
+		.regs = {
+			.sid = {
+				.override = 0x1e8,
+				.security = 0x1ec,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_ISPRA,
+		.name = "ispra",
+		.sid = TEGRA186_SID_ISP,
+		.regs = {
+			.sid = {
+				.override = 0x220,
+				.security = 0x224,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_ISPWA,
+		.name = "ispwa",
+		.sid = TEGRA186_SID_ISP,
+		.regs = {
+			.sid = {
+				.override = 0x230,
+				.security = 0x234,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_ISPWB,
+		.name = "ispwb",
+		.sid = TEGRA186_SID_ISP,
+		.regs = {
+			.sid = {
+				.override = 0x238,
+				.security = 0x23c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_XUSB_HOSTR,
+		.name = "xusb_hostr",
+		.sid = TEGRA186_SID_XUSB_HOST,
+		.regs = {
+			.sid = {
+				.override = 0x250,
+				.security = 0x254,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_XUSB_HOSTW,
+		.name = "xusb_hostw",
+		.sid = TEGRA186_SID_XUSB_HOST,
+		.regs = {
+			.sid = {
+				.override = 0x258,
+				.security = 0x25c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_XUSB_DEVR,
+		.name = "xusb_devr",
+		.sid = TEGRA186_SID_XUSB_DEV,
+		.regs = {
+			.sid = {
+				.override = 0x260,
+				.security = 0x264,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_XUSB_DEVW,
+		.name = "xusb_devw",
+		.sid = TEGRA186_SID_XUSB_DEV,
+		.regs = {
+			.sid = {
+				.override = 0x268,
+				.security = 0x26c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_TSECSRD,
+		.name = "tsecsrd",
+		.sid = TEGRA186_SID_TSEC,
+		.regs = {
+			.sid = {
+				.override = 0x2a0,
+				.security = 0x2a4,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_TSECSWR,
+		.name = "tsecswr",
+		.sid = TEGRA186_SID_TSEC,
+		.regs = {
+			.sid = {
+				.override = 0x2a8,
+				.security = 0x2ac,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_GPUSRD,
+		.name = "gpusrd",
+		.sid = TEGRA186_SID_GPU,
+		.regs = {
+			.sid = {
+				.override = 0x2c0,
+				.security = 0x2c4,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_GPUSWR,
+		.name = "gpuswr",
+		.sid = TEGRA186_SID_GPU,
+		.regs = {
+			.sid = {
+				.override = 0x2c8,
+				.security = 0x2cc,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SDMMCRA,
+		.name = "sdmmcra",
+		.sid = TEGRA186_SID_SDMMC1,
+		.regs = {
+			.sid = {
+				.override = 0x300,
+				.security = 0x304,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SDMMCRAA,
+		.name = "sdmmcraa",
+		.sid = TEGRA186_SID_SDMMC2,
+		.regs = {
+			.sid = {
+				.override = 0x308,
+				.security = 0x30c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SDMMCR,
+		.name = "sdmmcr",
+		.sid = TEGRA186_SID_SDMMC3,
+		.regs = {
+			.sid = {
+				.override = 0x310,
+				.security = 0x314,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SDMMCRAB,
+		.name = "sdmmcrab",
+		.sid = TEGRA186_SID_SDMMC4,
+		.regs = {
+			.sid = {
+				.override = 0x318,
+				.security = 0x31c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SDMMCWA,
+		.name = "sdmmcwa",
+		.sid = TEGRA186_SID_SDMMC1,
+		.regs = {
+			.sid = {
+				.override = 0x320,
+				.security = 0x324,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SDMMCWAA,
+		.name = "sdmmcwaa",
+		.sid = TEGRA186_SID_SDMMC2,
+		.regs = {
+			.sid = {
+				.override = 0x328,
+				.security = 0x32c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SDMMCW,
+		.name = "sdmmcw",
+		.sid = TEGRA186_SID_SDMMC3,
+		.regs = {
+			.sid = {
+				.override = 0x330,
+				.security = 0x334,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SDMMCWAB,
+		.name = "sdmmcwab",
+		.sid = TEGRA186_SID_SDMMC4,
+		.regs = {
+			.sid = {
+				.override = 0x338,
+				.security = 0x33c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_VICSRD,
+		.name = "vicsrd",
+		.sid = TEGRA186_SID_VIC,
+		.regs = {
+			.sid = {
+				.override = 0x360,
+				.security = 0x364,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_VICSWR,
+		.name = "vicswr",
+		.sid = TEGRA186_SID_VIC,
+		.regs = {
+			.sid = {
+				.override = 0x368,
+				.security = 0x36c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_VIW,
+		.name = "viw",
+		.sid = TEGRA186_SID_VI,
+		.regs = {
+			.sid = {
+				.override = 0x390,
+				.security = 0x394,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_NVDECSRD,
+		.name = "nvdecsrd",
+		.sid = TEGRA186_SID_NVDEC,
+		.regs = {
+			.sid = {
+				.override = 0x3c0,
+				.security = 0x3c4,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_NVDECSWR,
+		.name = "nvdecswr",
+		.sid = TEGRA186_SID_NVDEC,
+		.regs = {
+			.sid = {
+				.override = 0x3c8,
+				.security = 0x3cc,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_APER,
+		.name = "aper",
+		.sid = TEGRA186_SID_APE,
+		.regs = {
+			.sid = {
+				.override = 0x3d0,
+				.security = 0x3d4,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_APEW,
+		.name = "apew",
+		.sid = TEGRA186_SID_APE,
+		.regs = {
+			.sid = {
+				.override = 0x3d8,
+				.security = 0x3dc,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_NVJPGSRD,
+		.name = "nvjpgsrd",
+		.sid = TEGRA186_SID_NVJPG,
+		.regs = {
+			.sid = {
+				.override = 0x3f0,
+				.security = 0x3f4,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_NVJPGSWR,
+		.name = "nvjpgswr",
+		.sid = TEGRA186_SID_NVJPG,
+		.regs = {
+			.sid = {
+				.override = 0x3f8,
+				.security = 0x3fc,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SESRD,
+		.name = "sesrd",
+		.sid = TEGRA186_SID_SE,
+		.regs = {
+			.sid = {
+				.override = 0x400,
+				.security = 0x404,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SESWR,
+		.name = "seswr",
+		.sid = TEGRA186_SID_SE,
+		.regs = {
+			.sid = {
+				.override = 0x408,
+				.security = 0x40c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_ETRR,
+		.name = "etrr",
+		.sid = TEGRA186_SID_ETR,
+		.regs = {
+			.sid = {
+				.override = 0x420,
+				.security = 0x424,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_ETRW,
+		.name = "etrw",
+		.sid = TEGRA186_SID_ETR,
+		.regs = {
+			.sid = {
+				.override = 0x428,
+				.security = 0x42c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_TSECSRDB,
+		.name = "tsecsrdb",
+		.sid = TEGRA186_SID_TSECB,
+		.regs = {
+			.sid = {
+				.override = 0x430,
+				.security = 0x434,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_TSECSWRB,
+		.name = "tsecswrb",
+		.sid = TEGRA186_SID_TSECB,
+		.regs = {
+			.sid = {
+				.override = 0x438,
+				.security = 0x43c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_GPUSRD2,
+		.name = "gpusrd2",
+		.sid = TEGRA186_SID_GPU,
+		.regs = {
+			.sid = {
+				.override = 0x440,
+				.security = 0x444,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_GPUSWR2,
+		.name = "gpuswr2",
+		.sid = TEGRA186_SID_GPU,
+		.regs = {
+			.sid = {
+				.override = 0x448,
+				.security = 0x44c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_AXISR,
+		.name = "axisr",
+		.sid = TEGRA186_SID_GPCDMA_0,
+		.regs = {
+			.sid = {
+				.override = 0x460,
+				.security = 0x464,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_AXISW,
+		.name = "axisw",
+		.sid = TEGRA186_SID_GPCDMA_0,
+		.regs = {
+			.sid = {
+				.override = 0x468,
+				.security = 0x46c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_EQOSR,
+		.name = "eqosr",
+		.sid = TEGRA186_SID_EQOS,
+		.regs = {
+			.sid = {
+				.override = 0x470,
+				.security = 0x474,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_EQOSW,
+		.name = "eqosw",
+		.sid = TEGRA186_SID_EQOS,
+		.regs = {
+			.sid = {
+				.override = 0x478,
+				.security = 0x47c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_UFSHCR,
+		.name = "ufshcr",
+		.sid = TEGRA186_SID_UFSHC,
+		.regs = {
+			.sid = {
+				.override = 0x480,
+				.security = 0x484,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_UFSHCW,
+		.name = "ufshcw",
+		.sid = TEGRA186_SID_UFSHC,
+		.regs = {
+			.sid = {
+				.override = 0x488,
+				.security = 0x48c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_NVDISPLAYR,
+		.name = "nvdisplayr",
+		.sid = TEGRA186_SID_NVDISPLAY,
+		.regs = {
+			.sid = {
+				.override = 0x490,
+				.security = 0x494,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_BPMPR,
+		.name = "bpmpr",
+		.sid = TEGRA186_SID_BPMP,
+		.regs = {
+			.sid = {
+				.override = 0x498,
+				.security = 0x49c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_BPMPW,
+		.name = "bpmpw",
+		.sid = TEGRA186_SID_BPMP,
+		.regs = {
+			.sid = {
+				.override = 0x4a0,
+				.security = 0x4a4,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_BPMPDMAR,
+		.name = "bpmpdmar",
+		.sid = TEGRA186_SID_BPMP,
+		.regs = {
+			.sid = {
+				.override = 0x4a8,
+				.security = 0x4ac,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_BPMPDMAW,
+		.name = "bpmpdmaw",
+		.sid = TEGRA186_SID_BPMP,
+		.regs = {
+			.sid = {
+				.override = 0x4b0,
+				.security = 0x4b4,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_AONR,
+		.name = "aonr",
+		.sid = TEGRA186_SID_AON,
+		.regs = {
+			.sid = {
+				.override = 0x4b8,
+				.security = 0x4bc,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_AONW,
+		.name = "aonw",
+		.sid = TEGRA186_SID_AON,
+		.regs = {
+			.sid = {
+				.override = 0x4c0,
+				.security = 0x4c4,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_AONDMAR,
+		.name = "aondmar",
+		.sid = TEGRA186_SID_AON,
+		.regs = {
+			.sid = {
+				.override = 0x4c8,
+				.security = 0x4cc,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_AONDMAW,
+		.name = "aondmaw",
+		.sid = TEGRA186_SID_AON,
+		.regs = {
+			.sid = {
+				.override = 0x4d0,
+				.security = 0x4d4,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SCER,
+		.name = "scer",
+		.sid = TEGRA186_SID_SCE,
+		.regs = {
+			.sid = {
+				.override = 0x4d8,
+				.security = 0x4dc,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SCEW,
+		.name = "scew",
+		.sid = TEGRA186_SID_SCE,
+		.regs = {
+			.sid = {
+				.override = 0x4e0,
+				.security = 0x4e4,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SCEDMAR,
+		.name = "scedmar",
+		.sid = TEGRA186_SID_SCE,
+		.regs = {
+			.sid = {
+				.override = 0x4e8,
+				.security = 0x4ec,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_SCEDMAW,
+		.name = "scedmaw",
+		.sid = TEGRA186_SID_SCE,
+		.regs = {
+			.sid = {
+				.override = 0x4f0,
+				.security = 0x4f4,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_APEDMAR,
+		.name = "apedmar",
+		.sid = TEGRA186_SID_APE,
+		.regs = {
+			.sid = {
+				.override = 0x4f8,
+				.security = 0x4fc,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_APEDMAW,
+		.name = "apedmaw",
+		.sid = TEGRA186_SID_APE,
+		.regs = {
+			.sid = {
+				.override = 0x500,
+				.security = 0x504,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_NVDISPLAYR1,
+		.name = "nvdisplayr1",
+		.sid = TEGRA186_SID_NVDISPLAY,
+		.regs = {
+			.sid = {
+				.override = 0x508,
+				.security = 0x50c,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_VICSRD1,
+		.name = "vicsrd1",
+		.sid = TEGRA186_SID_VIC,
+		.regs = {
+			.sid = {
+				.override = 0x510,
+				.security = 0x514,
+			},
+		},
+	}, {
+		.id = TEGRA186_MEMORY_CLIENT_NVDECSRD1,
+		.name = "nvdecsrd1",
+		.sid = TEGRA186_SID_NVDEC,
+		.regs = {
+			.sid = {
+				.override = 0x518,
+				.security = 0x51c,
+			},
+		},
+	},
+};
+
+static const struct tegra_mc_intmask tegra186_mc_intmasks[] = {
+	{
+		.reg = MC_INTMASK,
+		.mask = MC_INT_DECERR_GENERALIZED_CARVEOUT | MC_INT_DECERR_MTS |
+			MC_INT_SECERR_SEC | MC_INT_DECERR_VPR |
+			MC_INT_SECURITY_VIOLATION | MC_INT_DECERR_EMEM,
+	},
+};
+
+const struct tegra_mc_soc tegra186_mc_soc = {
+	.num_clients = ARRAY_SIZE(tegra186_mc_clients),
+	.clients = tegra186_mc_clients,
+	.num_address_bits = 40,
+	.num_channels = 4,
+	.client_id_mask = 0xff,
+	.intmasks = tegra186_mc_intmasks,
+	.num_intmasks = ARRAY_SIZE(tegra186_mc_intmasks),
+	.ops = &tegra186_mc_ops,
+	.ch_intmask = 0x0000000f,
+	.global_intstatus_channel_shift = 0,
+	.regs = &tegra20_mc_regs,
+	.handle_irq = tegra30_mc_irq_handlers,
+	.num_interrupts = ARRAY_SIZE(tegra30_mc_irq_handlers),
+	.mc_addr_hi_mask = 0x3,
+	.mc_err_status_type_mask = (0x7 << 28),
+};
+#endif

linux-7.2.3/drivers/memory/tegra/tegra20.c

@@ -0,0 +1,796 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012-2026 NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <dt-bindings/memory/tegra20-mc.h>
+
+#include "mc.h"
+
+#define MC_STAT_CONTROL				0x90
+#define MC_STAT_EMC_CLOCK_LIMIT			0xa0
+#define MC_STAT_EMC_CLOCKS			0xa4
+#define MC_STAT_EMC_CONTROL_0			0xa8
+#define MC_STAT_EMC_CONTROL_1			0xac
+#define MC_STAT_EMC_COUNT_0			0xb8
+#define MC_STAT_EMC_COUNT_1			0xbc
+
+#define MC_STAT_CONTROL_CLIENT_ID		GENMASK(13,  8)
+#define MC_STAT_CONTROL_EVENT			GENMASK(23, 16)
+#define MC_STAT_CONTROL_PRI_EVENT		GENMASK(25, 24)
+#define MC_STAT_CONTROL_FILTER_CLIENT_ENABLE	GENMASK(26, 26)
+#define MC_STAT_CONTROL_FILTER_PRI		GENMASK(29, 28)
+
+#define MC_STAT_CONTROL_PRI_EVENT_HP		0
+#define MC_STAT_CONTROL_PRI_EVENT_TM		1
+#define MC_STAT_CONTROL_PRI_EVENT_BW		2
+
+#define MC_STAT_CONTROL_FILTER_PRI_DISABLE	0
+#define MC_STAT_CONTROL_FILTER_PRI_NO		1
+#define MC_STAT_CONTROL_FILTER_PRI_YES		2
+
+#define MC_STAT_CONTROL_EVENT_QUALIFIED		0
+#define MC_STAT_CONTROL_EVENT_ANY_READ		1
+#define MC_STAT_CONTROL_EVENT_ANY_WRITE		2
+#define MC_STAT_CONTROL_EVENT_RD_WR_CHANGE	3
+#define MC_STAT_CONTROL_EVENT_SUCCESSIVE	4
+#define MC_STAT_CONTROL_EVENT_ARB_BANK_AA	5
+#define MC_STAT_CONTROL_EVENT_ARB_BANK_BB	6
+#define MC_STAT_CONTROL_EVENT_PAGE_MISS		7
+#define MC_STAT_CONTROL_EVENT_AUTO_PRECHARGE	8
+
+#define EMC_GATHER_RST				(0 << 8)
+#define EMC_GATHER_CLEAR			(1 << 8)
+#define EMC_GATHER_DISABLE			(2 << 8)
+#define EMC_GATHER_ENABLE			(3 << 8)
+
+#define MC_STAT_SAMPLE_TIME_USEC		16000
+
+/* we store collected statistics as a fixed point values */
+#define MC_FX_FRAC_SCALE			100
+
+static DEFINE_MUTEX(tegra20_mc_stat_lock);
+
+struct tegra20_mc_stat_gather {
+	unsigned int pri_filter;
+	unsigned int pri_event;
+	unsigned int result;
+	unsigned int client;
+	unsigned int event;
+	bool client_enb;
+};
+
+struct tegra20_mc_stat {
+	struct tegra20_mc_stat_gather gather0;
+	struct tegra20_mc_stat_gather gather1;
+	unsigned int sample_time_usec;
+	const struct tegra_mc *mc;
+};
+
+struct tegra20_mc_client_stat {
+	unsigned int events;
+	unsigned int arb_high_prio;
+	unsigned int arb_timeout;
+	unsigned int arb_bandwidth;
+	unsigned int rd_wr_change;
+	unsigned int successive;
+	unsigned int page_miss;
+	unsigned int auto_precharge;
+	unsigned int arb_bank_aa;
+	unsigned int arb_bank_bb;
+};
+
+static const struct tegra_mc_client tegra20_mc_clients[] = {
+	{
+		.id = 0x00,
+		.name = "display0a",
+	}, {
+		.id = 0x01,
+		.name = "display0ab",
+	}, {
+		.id = 0x02,
+		.name = "display0b",
+	}, {
+		.id = 0x03,
+		.name = "display0bb",
+	}, {
+		.id = 0x04,
+		.name = "display0c",
+	}, {
+		.id = 0x05,
+		.name = "display0cb",
+	}, {
+		.id = 0x06,
+		.name = "display1b",
+	}, {
+		.id = 0x07,
+		.name = "display1bb",
+	}, {
+		.id = 0x08,
+		.name = "eppup",
+	}, {
+		.id = 0x09,
+		.name = "g2pr",
+	}, {
+		.id = 0x0a,
+		.name = "g2sr",
+	}, {
+		.id = 0x0b,
+		.name = "mpeunifbr",
+	}, {
+		.id = 0x0c,
+		.name = "viruv",
+	}, {
+		.id = 0x0d,
+		.name = "avpcarm7r",
+	}, {
+		.id = 0x0e,
+		.name = "displayhc",
+	}, {
+		.id = 0x0f,
+		.name = "displayhcb",
+	}, {
+		.id = 0x10,
+		.name = "fdcdrd",
+	}, {
+		.id = 0x11,
+		.name = "g2dr",
+	}, {
+		.id = 0x12,
+		.name = "host1xdmar",
+	}, {
+		.id = 0x13,
+		.name = "host1xr",
+	}, {
+		.id = 0x14,
+		.name = "idxsrd",
+	}, {
+		.id = 0x15,
+		.name = "mpcorer",
+	}, {
+		.id = 0x16,
+		.name = "mpe_ipred",
+	}, {
+		.id = 0x17,
+		.name = "mpeamemrd",
+	}, {
+		.id = 0x18,
+		.name = "mpecsrd",
+	}, {
+		.id = 0x19,
+		.name = "ppcsahbdmar",
+	}, {
+		.id = 0x1a,
+		.name = "ppcsahbslvr",
+	}, {
+		.id = 0x1b,
+		.name = "texsrd",
+	}, {
+		.id = 0x1c,
+		.name = "vdebsevr",
+	}, {
+		.id = 0x1d,
+		.name = "vdember",
+	}, {
+		.id = 0x1e,
+		.name = "vdemcer",
+	}, {
+		.id = 0x1f,
+		.name = "vdetper",
+	}, {
+		.id = 0x20,
+		.name = "eppu",
+	}, {
+		.id = 0x21,
+		.name = "eppv",
+	}, {
+		.id = 0x22,
+		.name = "eppy",
+	}, {
+		.id = 0x23,
+		.name = "mpeunifbw",
+	}, {
+		.id = 0x24,
+		.name = "viwsb",
+	}, {
+		.id = 0x25,
+		.name = "viwu",
+	}, {
+		.id = 0x26,
+		.name = "viwv",
+	}, {
+		.id = 0x27,
+		.name = "viwy",
+	}, {
+		.id = 0x28,
+		.name = "g2dw",
+	}, {
+		.id = 0x29,
+		.name = "avpcarm7w",
+	}, {
+		.id = 0x2a,
+		.name = "fdcdwr",
+	}, {
+		.id = 0x2b,
+		.name = "host1xw",
+	}, {
+		.id = 0x2c,
+		.name = "ispw",
+	}, {
+		.id = 0x2d,
+		.name = "mpcorew",
+	}, {
+		.id = 0x2e,
+		.name = "mpecswr",
+	}, {
+		.id = 0x2f,
+		.name = "ppcsahbdmaw",
+	}, {
+		.id = 0x30,
+		.name = "ppcsahbslvw",
+	}, {
+		.id = 0x31,
+		.name = "vdebsevw",
+	}, {
+		.id = 0x32,
+		.name = "vdembew",
+	}, {
+		.id = 0x33,
+		.name = "vdetpmw",
+	},
+};
+
+#define TEGRA20_MC_RESET(_name, _control, _status, _reset, _bit)	\
+	{								\
+		.name = #_name,						\
+		.id = TEGRA20_MC_RESET_##_name,				\
+		.control = _control,					\
+		.status = _status,					\
+		.reset = _reset,					\
+		.bit = _bit,						\
+	}
+
+static const struct tegra_mc_reset tegra20_mc_resets[] = {
+	TEGRA20_MC_RESET(AVPC,   0x100, 0x140, 0x104,  0),
+	TEGRA20_MC_RESET(DC,     0x100, 0x144, 0x104,  1),
+	TEGRA20_MC_RESET(DCB,    0x100, 0x148, 0x104,  2),
+	TEGRA20_MC_RESET(EPP,    0x100, 0x14c, 0x104,  3),
+	TEGRA20_MC_RESET(2D,     0x100, 0x150, 0x104,  4),
+	TEGRA20_MC_RESET(HC,     0x100, 0x154, 0x104,  5),
+	TEGRA20_MC_RESET(ISP,    0x100, 0x158, 0x104,  6),
+	TEGRA20_MC_RESET(MPCORE, 0x100, 0x15c, 0x104,  7),
+	TEGRA20_MC_RESET(MPEA,   0x100, 0x160, 0x104,  8),
+	TEGRA20_MC_RESET(MPEB,   0x100, 0x164, 0x104,  9),
+	TEGRA20_MC_RESET(MPEC,   0x100, 0x168, 0x104, 10),
+	TEGRA20_MC_RESET(3D,     0x100, 0x16c, 0x104, 11),
+	TEGRA20_MC_RESET(PPCS,   0x100, 0x170, 0x104, 12),
+	TEGRA20_MC_RESET(VDE,    0x100, 0x174, 0x104, 13),
+	TEGRA20_MC_RESET(VI,     0x100, 0x178, 0x104, 14),
+};
+
+static int tegra20_mc_hotreset_assert(struct tegra_mc *mc,
+				      const struct tegra_mc_reset *rst)
+{
+	unsigned long flags;
+	u32 value;
+
+	spin_lock_irqsave(&mc->lock, flags);
+
+	value = mc_readl(mc, rst->reset);
+	mc_writel(mc, value & ~BIT(rst->bit), rst->reset);
+
+	spin_unlock_irqrestore(&mc->lock, flags);
+
+	return 0;
+}
+
+static int tegra20_mc_hotreset_deassert(struct tegra_mc *mc,
+					const struct tegra_mc_reset *rst)
+{
+	unsigned long flags;
+	u32 value;
+
+	spin_lock_irqsave(&mc->lock, flags);
+
+	value = mc_readl(mc, rst->reset);
+	mc_writel(mc, value | BIT(rst->bit), rst->reset);
+
+	spin_unlock_irqrestore(&mc->lock, flags);
+
+	return 0;
+}
+
+static int tegra20_mc_block_dma(struct tegra_mc *mc,
+				const struct tegra_mc_reset *rst)
+{
+	unsigned long flags;
+	u32 value;
+
+	spin_lock_irqsave(&mc->lock, flags);
+
+	value = mc_readl(mc, rst->control) & ~BIT(rst->bit);
+	mc_writel(mc, value, rst->control);
+
+	spin_unlock_irqrestore(&mc->lock, flags);
+
+	return 0;
+}
+
+static bool tegra20_mc_dma_idling(struct tegra_mc *mc,
+				  const struct tegra_mc_reset *rst)
+{
+	return mc_readl(mc, rst->status) == 0;
+}
+
+static int tegra20_mc_reset_status(struct tegra_mc *mc,
+				   const struct tegra_mc_reset *rst)
+{
+	return (mc_readl(mc, rst->reset) & BIT(rst->bit)) == 0;
+}
+
+static int tegra20_mc_unblock_dma(struct tegra_mc *mc,
+				  const struct tegra_mc_reset *rst)
+{
+	unsigned long flags;
+	u32 value;
+
+	spin_lock_irqsave(&mc->lock, flags);
+
+	value = mc_readl(mc, rst->control) | BIT(rst->bit);
+	mc_writel(mc, value, rst->control);
+
+	spin_unlock_irqrestore(&mc->lock, flags);
+
+	return 0;
+}
+
+static const struct tegra_mc_reset_ops tegra20_mc_reset_ops = {
+	.hotreset_assert = tegra20_mc_hotreset_assert,
+	.hotreset_deassert = tegra20_mc_hotreset_deassert,
+	.block_dma = tegra20_mc_block_dma,
+	.dma_idling = tegra20_mc_dma_idling,
+	.unblock_dma = tegra20_mc_unblock_dma,
+	.reset_status = tegra20_mc_reset_status,
+};
+
+static int tegra20_mc_icc_set(struct icc_node *src, struct icc_node *dst)
+{
+	/*
+	 * It should be possible to tune arbitration knobs here, but the
+	 * default values are known to work well on all devices. Hence
+	 * nothing to do here so far.
+	 */
+	return 0;
+}
+
+static int tegra20_mc_icc_aggreate(struct icc_node *node, u32 tag, u32 avg_bw,
+				   u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
+{
+	/*
+	 * ISO clients need to reserve extra bandwidth up-front because
+	 * there could be high bandwidth pressure during initial filling
+	 * of the client's FIFO buffers.  Secondly, we need to take into
+	 * account impurities of the memory subsystem.
+	 */
+	if (tag & TEGRA_MC_ICC_TAG_ISO)
+		peak_bw = tegra_mc_scale_percents(peak_bw, 300);
+
+	*agg_avg += avg_bw;
+	*agg_peak = max(*agg_peak, peak_bw);
+
+	return 0;
+}
+
+static struct icc_node_data *
+tegra20_mc_of_icc_xlate_extended(const struct of_phandle_args *spec, void *data)
+{
+	struct tegra_mc *mc = icc_provider_to_tegra_mc(data);
+	unsigned int i, idx = spec->args[0];
+	struct icc_node_data *ndata;
+	struct icc_node *node;
+
+	list_for_each_entry(node, &mc->provider.nodes, node_list) {
+		if (node->id != idx)
+			continue;
+
+		ndata = kzalloc_obj(*ndata);
+		if (!ndata)
+			return ERR_PTR(-ENOMEM);
+
+		ndata->node = node;
+
+		/* these clients are isochronous by default */
+		if (strstarts(node->name, "display") ||
+		    strstarts(node->name, "vi"))
+			ndata->tag = TEGRA_MC_ICC_TAG_ISO;
+		else
+			ndata->tag = TEGRA_MC_ICC_TAG_DEFAULT;
+
+		return ndata;
+	}
+
+	for (i = 0; i < mc->soc->num_clients; i++) {
+		if (mc->soc->clients[i].id == idx)
+			return ERR_PTR(-EPROBE_DEFER);
+	}
+
+	dev_err(mc->dev, "invalid ICC client ID %u\n", idx);
+
+	return ERR_PTR(-EINVAL);
+}
+
+static const struct tegra_mc_icc_ops tegra20_mc_icc_ops = {
+	.xlate_extended = tegra20_mc_of_icc_xlate_extended,
+	.aggregate = tegra20_mc_icc_aggreate,
+	.set = tegra20_mc_icc_set,
+};
+
+static u32 tegra20_mc_stat_gather_control(const struct tegra20_mc_stat_gather *g)
+{
+	u32 control;
+
+	control  = FIELD_PREP(MC_STAT_CONTROL_EVENT, g->event);
+	control |= FIELD_PREP(MC_STAT_CONTROL_CLIENT_ID, g->client);
+	control |= FIELD_PREP(MC_STAT_CONTROL_PRI_EVENT, g->pri_event);
+	control |= FIELD_PREP(MC_STAT_CONTROL_FILTER_PRI, g->pri_filter);
+	control |= FIELD_PREP(MC_STAT_CONTROL_FILTER_CLIENT_ENABLE, g->client_enb);
+
+	return control;
+}
+
+static void tegra20_mc_stat_gather(struct tegra20_mc_stat *stat)
+{
+	u32 clocks, count0, count1, control_0, control_1;
+	const struct tegra_mc *mc = stat->mc;
+
+	control_0 = tegra20_mc_stat_gather_control(&stat->gather0);
+	control_1 = tegra20_mc_stat_gather_control(&stat->gather1);
+
+	/*
+	 * Reset statistic gathers state, select statistics collection mode
+	 * and set clocks counter saturation limit to maximum.
+	 */
+	mc_writel(mc, 0x00000000, MC_STAT_CONTROL);
+	mc_writel(mc,  control_0, MC_STAT_EMC_CONTROL_0);
+	mc_writel(mc,  control_1, MC_STAT_EMC_CONTROL_1);
+	mc_writel(mc, 0xffffffff, MC_STAT_EMC_CLOCK_LIMIT);
+
+	mc_writel(mc, EMC_GATHER_ENABLE, MC_STAT_CONTROL);
+	fsleep(stat->sample_time_usec);
+	mc_writel(mc, EMC_GATHER_DISABLE, MC_STAT_CONTROL);
+
+	count0 = mc_readl(mc, MC_STAT_EMC_COUNT_0);
+	count1 = mc_readl(mc, MC_STAT_EMC_COUNT_1);
+	clocks = mc_readl(mc, MC_STAT_EMC_CLOCKS);
+	clocks = max(clocks / 100 / MC_FX_FRAC_SCALE, 1u);
+
+	stat->gather0.result = DIV_ROUND_UP(count0, clocks);
+	stat->gather1.result = DIV_ROUND_UP(count1, clocks);
+}
+
+static void tegra20_mc_stat_events(const struct tegra_mc *mc,
+				   const struct tegra_mc_client *client0,
+				   const struct tegra_mc_client *client1,
+				   unsigned int pri_filter,
+				   unsigned int pri_event,
+				   unsigned int event,
+				   unsigned int *result0,
+				   unsigned int *result1)
+{
+	struct tegra20_mc_stat stat = {};
+
+	stat.gather0.client = client0 ? client0->id : 0;
+	stat.gather0.pri_filter = pri_filter;
+	stat.gather0.client_enb = !!client0;
+	stat.gather0.pri_event = pri_event;
+	stat.gather0.event = event;
+
+	stat.gather1.client = client1 ? client1->id : 0;
+	stat.gather1.pri_filter = pri_filter;
+	stat.gather1.client_enb = !!client1;
+	stat.gather1.pri_event = pri_event;
+	stat.gather1.event = event;
+
+	stat.sample_time_usec = MC_STAT_SAMPLE_TIME_USEC;
+	stat.mc = mc;
+
+	tegra20_mc_stat_gather(&stat);
+
+	*result0 = stat.gather0.result;
+	*result1 = stat.gather1.result;
+}
+
+static void tegra20_mc_collect_stats(const struct tegra_mc *mc,
+				     struct tegra20_mc_client_stat *stats)
+{
+	const struct tegra_mc_client *client0, *client1;
+	unsigned int i;
+
+	/* collect memory controller utilization percent for each client */
+	for (i = 0; i < mc->soc->num_clients; i += 2) {
+		client0 = &mc->soc->clients[i];
+		client1 = &mc->soc->clients[i + 1];
+
+		if (i + 1 == mc->soc->num_clients)
+			client1 = NULL;
+
+		tegra20_mc_stat_events(mc, client0, client1,
+				       MC_STAT_CONTROL_FILTER_PRI_DISABLE,
+				       MC_STAT_CONTROL_PRI_EVENT_HP,
+				       MC_STAT_CONTROL_EVENT_QUALIFIED,
+				       &stats[i + 0].events,
+				       &stats[i + 1].events);
+	}
+
+	/* collect more info from active clients */
+	for (i = 0; i < mc->soc->num_clients; i++) {
+		unsigned int clienta, clientb = mc->soc->num_clients;
+
+		for (client0 = NULL; i < mc->soc->num_clients; i++) {
+			if (stats[i].events) {
+				client0 = &mc->soc->clients[i];
+				clienta = i++;
+				break;
+			}
+		}
+
+		for (client1 = NULL; i < mc->soc->num_clients; i++) {
+			if (stats[i].events) {
+				client1 = &mc->soc->clients[i];
+				clientb = i;
+				break;
+			}
+		}
+
+		if (!client0 && !client1)
+			break;
+
+		tegra20_mc_stat_events(mc, client0, client1,
+				       MC_STAT_CONTROL_FILTER_PRI_YES,
+				       MC_STAT_CONTROL_PRI_EVENT_HP,
+				       MC_STAT_CONTROL_EVENT_QUALIFIED,
+				       &stats[clienta].arb_high_prio,
+				       &stats[clientb].arb_high_prio);
+
+		tegra20_mc_stat_events(mc, client0, client1,
+				       MC_STAT_CONTROL_FILTER_PRI_YES,
+				       MC_STAT_CONTROL_PRI_EVENT_TM,
+				       MC_STAT_CONTROL_EVENT_QUALIFIED,
+				       &stats[clienta].arb_timeout,
+				       &stats[clientb].arb_timeout);
+
+		tegra20_mc_stat_events(mc, client0, client1,
+				       MC_STAT_CONTROL_FILTER_PRI_YES,
+				       MC_STAT_CONTROL_PRI_EVENT_BW,
+				       MC_STAT_CONTROL_EVENT_QUALIFIED,
+				       &stats[clienta].arb_bandwidth,
+				       &stats[clientb].arb_bandwidth);
+
+		tegra20_mc_stat_events(mc, client0, client1,
+				       MC_STAT_CONTROL_FILTER_PRI_DISABLE,
+				       MC_STAT_CONTROL_PRI_EVENT_HP,
+				       MC_STAT_CONTROL_EVENT_RD_WR_CHANGE,
+				       &stats[clienta].rd_wr_change,
+				       &stats[clientb].rd_wr_change);
+
+		tegra20_mc_stat_events(mc, client0, client1,
+				       MC_STAT_CONTROL_FILTER_PRI_DISABLE,
+				       MC_STAT_CONTROL_PRI_EVENT_HP,
+				       MC_STAT_CONTROL_EVENT_SUCCESSIVE,
+				       &stats[clienta].successive,
+				       &stats[clientb].successive);
+
+		tegra20_mc_stat_events(mc, client0, client1,
+				       MC_STAT_CONTROL_FILTER_PRI_DISABLE,
+				       MC_STAT_CONTROL_PRI_EVENT_HP,
+				       MC_STAT_CONTROL_EVENT_PAGE_MISS,
+				       &stats[clienta].page_miss,
+				       &stats[clientb].page_miss);
+	}
+}
+
+static void tegra20_mc_printf_percents(struct seq_file *s,
+				       const char *fmt,
+				       unsigned int percents_fx)
+{
+	char percents_str[8];
+
+	snprintf(percents_str, ARRAY_SIZE(percents_str), "%3u.%02u%%",
+		 percents_fx / MC_FX_FRAC_SCALE, percents_fx % MC_FX_FRAC_SCALE);
+
+	seq_printf(s, fmt, percents_str);
+}
+
+static int tegra20_mc_stats_show(struct seq_file *s, void *unused)
+{
+	const struct tegra_mc *mc = dev_get_drvdata(s->private);
+	struct tegra20_mc_client_stat *stats;
+	unsigned int i;
+
+	stats = kzalloc_objs(*stats, mc->soc->num_clients + 1);
+	if (!stats)
+		return -ENOMEM;
+
+	mutex_lock(&tegra20_mc_stat_lock);
+
+	tegra20_mc_collect_stats(mc, stats);
+
+	mutex_unlock(&tegra20_mc_stat_lock);
+
+	seq_puts(s, "Memory client   Events   Timeout   High priority   Bandwidth ARB   RW change   Successive   Page miss\n");
+	seq_puts(s, "-----------------------------------------------------------------------------------------------------\n");
+
+	for (i = 0; i < mc->soc->num_clients; i++) {
+		seq_printf(s, "%-14s  ", mc->soc->clients[i].name);
+
+		/* An event is generated when client performs R/W request. */
+		tegra20_mc_printf_percents(s,  "%-9s", stats[i].events);
+
+		/*
+		 * An event is generated based on the timeout (TM) signal
+		 * accompanying a request for arbitration.
+		 */
+		tegra20_mc_printf_percents(s, "%-10s", stats[i].arb_timeout);
+
+		/*
+		 * An event is generated based on the high-priority (HP) signal
+		 * accompanying a request for arbitration.
+		 */
+		tegra20_mc_printf_percents(s, "%-16s", stats[i].arb_high_prio);
+
+		/*
+		 * An event is generated based on the bandwidth (BW) signal
+		 * accompanying a request for arbitration.
+		 */
+		tegra20_mc_printf_percents(s, "%-16s", stats[i].arb_bandwidth);
+
+		/*
+		 * An event is generated when the memory controller switches
+		 * between making a read request to making a write request.
+		 */
+		tegra20_mc_printf_percents(s, "%-12s", stats[i].rd_wr_change);
+
+		/*
+		 * An even generated when the chosen client has wins arbitration
+		 * when it was also the winner at the previous request.  If a
+		 * client makes N requests in a row that are honored, SUCCESSIVE
+		 * will be counted (N-1) times.  Large values for this event
+		 * imply that if we were patient enough, all of those requests
+		 * could have been coalesced.
+		 */
+		tegra20_mc_printf_percents(s, "%-13s", stats[i].successive);
+
+		/*
+		 * An event is generated when the memory controller detects a
+		 * page miss for the current request.
+		 */
+		tegra20_mc_printf_percents(s, "%-12s\n", stats[i].page_miss);
+	}
+
+	kfree(stats);
+
+	return 0;
+}
+
+static int tegra20_mc_probe(struct tegra_mc *mc)
+{
+	debugfs_create_devm_seqfile(mc->dev, "stats", mc->debugfs.root,
+				    tegra20_mc_stats_show);
+
+	return 0;
+}
+
+static irqreturn_t tegra20_mc_handle_irq(int irq, void *data)
+{
+	struct tegra_mc *mc = data;
+	unsigned long status;
+	unsigned int bit;
+
+	/* mask all interrupts to avoid flooding */
+	status = mc_readl(mc, MC_INTSTATUS) & mc->soc->intmasks[0].mask;
+	if (!status)
+		return IRQ_NONE;
+
+	for_each_set_bit(bit, &status, 32) {
+		const char *error = tegra_mc_status_names[bit];
+		const char *direction = "read", *secure = "";
+		const char *client, *desc;
+		phys_addr_t addr;
+		u32 value, reg;
+		u8 id, type;
+
+		switch (BIT(bit)) {
+		case MC_INT_DECERR_EMEM:
+			reg = MC_DECERR_EMEM_OTHERS_STATUS;
+			value = mc_readl(mc, reg);
+
+			id = value & mc->soc->client_id_mask;
+			desc = tegra20_mc_error_names[2];
+
+			if (value & BIT(31))
+				direction = "write";
+			break;
+
+		case MC_INT_INVALID_GART_PAGE:
+			reg = MC_GART_ERROR_REQ;
+			value = mc_readl(mc, reg);
+
+			id = (value >> 1) & mc->soc->client_id_mask;
+			desc = tegra20_mc_error_names[2];
+
+			if (value & BIT(0))
+				direction = "write";
+			break;
+
+		case MC_INT_SECURITY_VIOLATION:
+			reg = MC_SECURITY_VIOLATION_STATUS;
+			value = mc_readl(mc, reg);
+
+			id = value & mc->soc->client_id_mask;
+			type = (value & BIT(30)) ? 4 : 3;
+			desc = tegra20_mc_error_names[type];
+			secure = "secure ";
+
+			if (value & BIT(31))
+				direction = "write";
+			break;
+
+		default:
+			continue;
+		}
+
+		client = mc->soc->clients[id].name;
+		addr = mc_readl(mc, reg + sizeof(u32));
+
+		dev_err_ratelimited(mc->dev, "%s: %s%s @%pa: %s (%s)\n",
+				    client, secure, direction, &addr, error,
+				    desc);
+	}
+
+	/* clear interrupts */
+	mc_writel(mc, status, MC_INTSTATUS);
+
+	return IRQ_HANDLED;
+}
+
+static const irq_handler_t tegra20_mc_irq_handlers[] = {
+	tegra20_mc_handle_irq
+};
+
+static const struct tegra_mc_ops tegra20_mc_ops = {
+	.probe = tegra20_mc_probe,
+};
+
+static const struct tegra_mc_intmask tegra20_mc_intmasks[] = {
+	{
+		.reg = MC_INTMASK,
+		.mask = MC_INT_SECURITY_VIOLATION | MC_INT_INVALID_GART_PAGE |
+			MC_INT_DECERR_EMEM,
+	},
+};
+
+const struct tegra_mc_soc tegra20_mc_soc = {
+	.clients = tegra20_mc_clients,
+	.num_clients = ARRAY_SIZE(tegra20_mc_clients),
+	.num_address_bits = 32,
+	.client_id_mask = 0x3f,
+	.intmasks = tegra20_mc_intmasks,
+	.num_intmasks = ARRAY_SIZE(tegra20_mc_intmasks),
+	.reset_ops = &tegra20_mc_reset_ops,
+	.resets = tegra20_mc_resets,
+	.num_resets = ARRAY_SIZE(tegra20_mc_resets),
+	.icc_ops = &tegra20_mc_icc_ops,
+	.ops = &tegra20_mc_ops,
+	.regs = &tegra20_mc_regs,
+	.handle_irq = tegra20_mc_irq_handlers,
+	.num_interrupts = ARRAY_SIZE(tegra20_mc_irq_handlers),
+	.mc_err_status_type_mask = (0x7 << 28),
+};

linux-7.2.3/drivers/memory/tegra/tegra210-emc-table.c

@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/of_reserved_mem.h>
+
+#include "tegra210-emc.h"
+
+#define TEGRA_EMC_MAX_FREQS		16
+
+static int tegra210_emc_table_device_init(struct reserved_mem *rmem,
+					  struct device *dev)
+{
+	struct tegra210_emc *emc = dev_get_drvdata(dev);
+	struct tegra210_emc_timing *timings;
+	unsigned int i, count = 0;
+
+	timings = memremap(rmem->base, rmem->size, MEMREMAP_WB);
+	if (!timings) {
+		dev_err(dev, "failed to map EMC table\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < TEGRA_EMC_MAX_FREQS; i++) {
+		if (timings[i].revision == 0)
+			break;
+
+		count++;
+	}
+
+	/* only the nominal and derated tables are expected */
+	if (emc->derated) {
+		dev_warn(dev, "excess EMC table '%s'\n", rmem->name);
+		goto out;
+	}
+
+	if (emc->nominal) {
+		if (count != emc->num_timings) {
+			dev_warn(dev, "%u derated vs. %u nominal entries\n",
+				 count, emc->num_timings);
+			memunmap(timings);
+			return -EINVAL;
+		}
+
+		emc->derated = timings;
+	} else {
+		emc->num_timings = count;
+		emc->nominal = timings;
+	}
+
+out:
+	/* keep track of which table this is */
+	rmem->priv = timings;
+
+	return 0;
+}
+
+static void tegra210_emc_table_device_release(struct reserved_mem *rmem,
+					      struct device *dev)
+{
+	struct tegra210_emc_timing *timings = rmem->priv;
+	struct tegra210_emc *emc = dev_get_drvdata(dev);
+
+	if ((emc->nominal && timings != emc->nominal) &&
+	    (emc->derated && timings != emc->derated))
+		dev_warn(dev, "trying to release unassigned EMC table '%s'\n",
+			 rmem->name);
+
+	memunmap(timings);
+}
+
+static int tegra210_emc_table_init(unsigned long node,
+				   struct reserved_mem *rmem)
+{
+	pr_debug("Tegra210 EMC table at %pa, size %lu bytes\n", &rmem->base,
+		 (unsigned long)rmem->size);
+
+	return 0;
+}
+
+static const struct reserved_mem_ops tegra210_emc_table_ops = {
+	.node_init = tegra210_emc_table_init,
+	.device_init = tegra210_emc_table_device_init,
+	.device_release = tegra210_emc_table_device_release,
+};
+
+RESERVEDMEM_OF_DECLARE(tegra210_emc_table, "nvidia,tegra210-emc-table",
+		       &tegra210_emc_table_ops);

linux-7.2.3/drivers/memory/tegra/tegra210-mc.h

@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015-2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef TEGRA210_MC_H
+#define TEGRA210_MC_H
+
+#include "mc.h"
+
+/* register definitions */
+#define MC_LATENCY_ALLOWANCE_AVPC_0				0x2e4
+#define MC_LATENCY_ALLOWANCE_HC_0				0x310
+#define MC_LATENCY_ALLOWANCE_HC_1				0x314
+#define MC_LATENCY_ALLOWANCE_MPCORE_0				0x320
+#define MC_LATENCY_ALLOWANCE_NVENC_0				0x328
+#define MC_LATENCY_ALLOWANCE_PPCS_0				0x344
+#define MC_LATENCY_ALLOWANCE_PPCS_1				0x348
+#define MC_LATENCY_ALLOWANCE_ISP2_0				0x370
+#define MC_LATENCY_ALLOWANCE_ISP2_1				0x374
+#define MC_LATENCY_ALLOWANCE_XUSB_0				0x37c
+#define MC_LATENCY_ALLOWANCE_XUSB_1				0x380
+#define MC_LATENCY_ALLOWANCE_TSEC_0				0x390
+#define MC_LATENCY_ALLOWANCE_VIC_0				0x394
+#define MC_LATENCY_ALLOWANCE_VI2_0				0x398
+#define MC_LATENCY_ALLOWANCE_GPU_0				0x3ac
+#define MC_LATENCY_ALLOWANCE_SDMMCA_0				0x3b8
+#define MC_LATENCY_ALLOWANCE_SDMMCAA_0				0x3bc
+#define MC_LATENCY_ALLOWANCE_SDMMC_0				0x3c0
+#define MC_LATENCY_ALLOWANCE_SDMMCAB_0				0x3c4
+#define MC_LATENCY_ALLOWANCE_GPU2_0				0x3e8
+#define MC_LATENCY_ALLOWANCE_NVDEC_0				0x3d8
+#define MC_MLL_MPCORER_PTSA_RATE				0x44c
+#define MC_FTOP_PTSA_RATE					0x50c
+#define MC_EMEM_ARB_TIMING_RFCPB				0x6c0
+#define MC_EMEM_ARB_TIMING_CCDMW				0x6c4
+#define MC_EMEM_ARB_REFPB_HP_CTRL				0x6f0
+#define MC_EMEM_ARB_REFPB_BANK_CTRL				0x6f4
+#define MC_PTSA_GRANT_DECREMENT					0x960
+#define MC_EMEM_ARB_DHYST_CTRL					0xbcc
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_0			0xbd0
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_1			0xbd4
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_2			0xbd8
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_3			0xbdc
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_4			0xbe0
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_5			0xbe4
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_6			0xbe8
+#define MC_EMEM_ARB_DHYST_TIMEOUT_UTIL_7			0xbec
+
+#endif

linux-7.2.3/drivers/memory/tegra/tegra238.c

@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <soc/tegra/mc.h>
+
+#include <dt-bindings/memory/tegra234-mc.h>
+#include <dt-bindings/memory/nvidia,tegra238-mc.h>
+#include <linux/interconnect.h>
+#include <linux/tegra-icc.h>
+
+#include <soc/tegra/bpmp.h>
+#include "mc.h"
+
+static const struct tegra_mc_client tegra238_mc_clients[] = {
+	{
+		.id = TEGRA234_MEMORY_CLIENT_HDAR,
+		.name = "hdar",
+		.bpmp_id = TEGRA_ICC_BPMP_HDA,
+		.type = TEGRA_ICC_ISO_AUDIO,
+		.sid = TEGRA238_SID_HDA,
+		.regs = {
+			.sid = {
+				.override = 0xa8,
+				.security = 0xac,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_HDAW,
+		.name = "hdaw",
+		.bpmp_id = TEGRA_ICC_BPMP_HDA,
+		.type = TEGRA_ICC_ISO_AUDIO,
+		.sid = TEGRA238_SID_HDA,
+		.regs = {
+			.sid = {
+				.override = 0x1a8,
+				.security = 0x1ac,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_SDMMCRAB,
+		.name = "sdmmcrab",
+		.bpmp_id = TEGRA_ICC_BPMP_SDMMC_4,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_SDMMC4A,
+		.regs = {
+			.sid = {
+				.override = 0x318,
+				.security = 0x31c,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_SDMMCWAB,
+		.name = "sdmmcwab",
+		.bpmp_id = TEGRA_ICC_BPMP_SDMMC_4,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_SDMMC4A,
+		.regs = {
+			.sid = {
+				.override = 0x338,
+				.security = 0x33c,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_APER,
+		.name = "aper",
+		.bpmp_id = TEGRA_ICC_BPMP_APE,
+		.type = TEGRA_ICC_ISO_AUDIO,
+		.sid = TEGRA238_SID_ISO_APE0,
+		.regs = {
+			.sid = {
+				.override = 0x3d0,
+				.security = 0x3d4,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_APEW,
+		.name = "apew",
+		.bpmp_id = TEGRA_ICC_BPMP_APE,
+		.type = TEGRA_ICC_ISO_AUDIO,
+		.sid = TEGRA238_SID_ISO_APE0,
+		.regs = {
+			.sid = {
+				.override = 0x3d8,
+				.security = 0x3dc,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_NVDISPLAYR,
+		.name = "nvdisplayr",
+		.bpmp_id = TEGRA_ICC_BPMP_DISPLAY,
+		.type = TEGRA_ICC_ISO_DISPLAY,
+		.sid = TEGRA238_SID_ISO_NVDISPLAY,
+		.regs = {
+			.sid = {
+				.override = 0x490,
+				.security = 0x494,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_NVDISPLAYR1,
+		.name = "nvdisplayr1",
+		.bpmp_id = TEGRA_ICC_BPMP_DISPLAY,
+		.type = TEGRA_ICC_ISO_DISPLAY,
+		.sid = TEGRA238_SID_ISO_NVDISPLAY,
+		.regs = {
+			.sid = {
+				.override = 0x508,
+				.security = 0x50c,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_BPMPR,
+		.name = "bpmpr",
+		.sid = TEGRA238_SID_BPMP,
+		.regs = {
+			.sid = {
+				.override = 0x498,
+				.security = 0x49c,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_BPMPW,
+		.name = "bpmpw",
+		.sid = TEGRA238_SID_BPMP,
+		.regs = {
+			.sid = {
+				.override = 0x4a0,
+				.security = 0x4a4,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_BPMPDMAR,
+		.name = "bpmpdmar",
+		.sid = TEGRA238_SID_BPMP,
+		.regs = {
+			.sid = {
+				.override = 0x4a8,
+				.security = 0x4ac,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_BPMPDMAW,
+		.name = "bpmpdmaw",
+		.sid = TEGRA238_SID_BPMP,
+		.regs = {
+			.sid = {
+				.override = 0x4b0,
+				.security = 0x4b4,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_APEDMAR,
+		.name = "apedmar",
+		.bpmp_id = TEGRA_ICC_BPMP_APEDMA,
+		.type = TEGRA_ICC_ISO_AUDIO,
+		.sid = TEGRA238_SID_ISO_APE1,
+		.regs = {
+			.sid = {
+				.override = 0x4f8,
+				.security = 0x4fc,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_APEDMAW,
+		.name = "apedmaw",
+		.bpmp_id = TEGRA_ICC_BPMP_APEDMA,
+		.type = TEGRA_ICC_ISO_AUDIO,
+		.sid = TEGRA238_SID_ISO_APE1,
+		.regs = {
+			.sid = {
+				.override = 0x500,
+				.security = 0x504,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_VICSRD,
+		.name = "vicsrd",
+		.bpmp_id = TEGRA_ICC_BPMP_VIC,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_VIC,
+		.regs = {
+			.sid = {
+				.override = 0x360,
+				.security = 0x364,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_VICSWR,
+		.name = "vicswr",
+		.bpmp_id = TEGRA_ICC_BPMP_VIC,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_VIC,
+		.regs = {
+			.sid = {
+				.override = 0x368,
+				.security = 0x36c,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_NVDECSRD,
+		.name = "nvdecsrd",
+		.bpmp_id = TEGRA_ICC_BPMP_NVDEC,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_NVDEC,
+		.regs = {
+			.sid = {
+				.override = 0x3c0,
+				.security = 0x3c4,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_NVDECSWR,
+		.name = "nvdecswr",
+		.bpmp_id = TEGRA_ICC_BPMP_NVDEC,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_NVDEC,
+		.regs = {
+			.sid = {
+				.override = 0x3c8,
+				.security = 0x3cc,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_NVENCSRD,
+		.name = "nvencsrd",
+		.bpmp_id = TEGRA_ICC_BPMP_NVENC,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_NVENC,
+		.regs = {
+			.sid = {
+				.override = 0xe0,
+				.security = 0xe4,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_NVENCSWR,
+		.name = "nvencswr",
+		.bpmp_id = TEGRA_ICC_BPMP_NVENC,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_NVENC,
+		.regs = {
+			.sid = {
+				.override = 0x158,
+				.security = 0x15c,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_PCIE0R,
+		.name = "pcie0r",
+		.bpmp_id = TEGRA_ICC_BPMP_PCIE_0,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_PCIE0,
+		.regs = {
+			.sid = {
+				.override = 0x6c0,
+				.security = 0x6c4,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_PCIE0W,
+		.name = "pcie0w",
+		.bpmp_id = TEGRA_ICC_BPMP_PCIE_0,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_PCIE0,
+		.regs = {
+			.sid = {
+				.override = 0x6c8,
+				.security = 0x6cc,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_PCIE1R,
+		.name = "pcie1r",
+		.bpmp_id = TEGRA_ICC_BPMP_PCIE_1,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_PCIE1,
+		.regs = {
+			.sid = {
+				.override = 0x6d0,
+				.security = 0x6d4,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_PCIE1W,
+		.name = "pcie1w",
+		.bpmp_id = TEGRA_ICC_BPMP_PCIE_1,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_PCIE1,
+		.regs = {
+			.sid = {
+				.override = 0x6d8,
+				.security = 0x6dc,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_PCIE2AR,
+		.name = "pcie2ar",
+		.bpmp_id = TEGRA_ICC_BPMP_PCIE_2,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_PCIE2,
+		.regs = {
+			.sid = {
+				.override = 0x6e0,
+				.security = 0x6e4,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_PCIE2AW,
+		.name = "pcie2aw",
+		.bpmp_id = TEGRA_ICC_BPMP_PCIE_2,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_PCIE2,
+		.regs = {
+			.sid = {
+				.override = 0x6e8,
+				.security = 0x6ec,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_PCIE3R,
+		.name = "pcie3r",
+		.bpmp_id = TEGRA_ICC_BPMP_PCIE_3,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_PCIE3,
+		.regs = {
+			.sid = {
+				.override = 0x6f0,
+				.security = 0x6f4,
+			},
+		},
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_PCIE3W,
+		.name = "pcie3w",
+		.bpmp_id = TEGRA_ICC_BPMP_PCIE_3,
+		.type = TEGRA_ICC_NISO,
+		.sid = TEGRA238_SID_PCIE3,
+		.regs = {
+			.sid = {
+				.override = 0x6f8,
+				.security = 0x6fc,
+			},
+		},
+	}, {
+		.id = TEGRA_ICC_MC_CPU_CLUSTER0,
+		.name = "sw_cluster0",
+		.bpmp_id = TEGRA_ICC_BPMP_CPU_CLUSTER0,
+		.type = TEGRA_ICC_NISO,
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_NVL1R,
+		.name = "nvl1r",
+		.bpmp_id = TEGRA_ICC_BPMP_GPU,
+		.type = TEGRA_ICC_NISO,
+	}, {
+		.id = TEGRA234_MEMORY_CLIENT_NVL1W,
+		.name = "nvl1w",
+		.bpmp_id = TEGRA_ICC_BPMP_GPU,
+		.type = TEGRA_ICC_NISO,
+	}
+};
+
+static const struct tegra_mc_intmask tegra238_mc_intmasks[] = {
+	{
+		.reg = MC_INTMASK,
+		.mask = MC_INT_DECERR_ROUTE_SANITY | MC_INT_DECERR_GENERALIZED_CARVEOUT |
+			MC_INT_DECERR_MTS | MC_INT_SECERR_SEC | MC_INT_DECERR_VPR |
+			MC_INT_SECURITY_VIOLATION | MC_INT_DECERR_EMEM,
+	},
+};
+
+const struct tegra_mc_soc tegra238_mc_soc = {
+	.num_clients = ARRAY_SIZE(tegra238_mc_clients),
+	.clients = tegra238_mc_clients,
+	.num_address_bits = 40,
+	.num_channels = 8,
+	.client_id_mask = 0x1ff,
+	.intmasks = tegra238_mc_intmasks,
+	.num_intmasks = ARRAY_SIZE(tegra238_mc_intmasks),
+	.has_addr_hi_reg = true,
+	.ops = &tegra186_mc_ops,
+	.icc_ops = &tegra234_mc_icc_ops,
+	.ch_intmask = 0x0000ff00,
+	.global_intstatus_channel_shift = 8,
+	.num_carveouts = 32,
+	.regs = &tegra20_mc_regs,
+	.handle_irq = tegra30_mc_irq_handlers,
+	.num_interrupts = ARRAY_SIZE(tegra30_mc_irq_handlers),
+	.mc_addr_hi_mask = 0x3,
+	.mc_err_status_type_mask = (0x7 << 28),
+};

linux-7.2.3/drivers/memory/tegra/tegra264-bwmgr.h

@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2025 NVIDIA CORPORATION.  All rights reserved. */
+
+#ifndef MEMORY_TEGRA_TEGRA264_BWMGR_H
+#define MEMORY_TEGRA_TEGRA264_BWMGR_H
+
+#define TEGRA264_BWMGR_ICC_PRIMARY	1
+#define TEGRA264_BWMGR_DEBUG		2
+#define TEGRA264_BWMGR_CPU_CLUSTER0	3
+#define TEGRA264_BWMGR_CPU_CLUSTER1	4
+#define TEGRA264_BWMGR_CPU_CLUSTER2	5
+#define TEGRA264_BWMGR_CPU_CLUSTER3	6
+#define TEGRA264_BWMGR_CPU_CLUSTER4	7
+#define TEGRA264_BWMGR_CPU_CLUSTER5	8
+#define TEGRA264_BWMGR_CPU_CLUSTER6	9
+#define TEGRA264_BWMGR_CACTMON		10
+#define TEGRA264_BWMGR_DISPLAY		11
+#define TEGRA264_BWMGR_VI		12
+#define TEGRA264_BWMGR_APE		13
+#define TEGRA264_BWMGR_VIFAL		14
+#define TEGRA264_BWMGR_GPU		15
+#define TEGRA264_BWMGR_EQOS		16
+#define TEGRA264_BWMGR_PCIE_0		17
+#define TEGRA264_BWMGR_PCIE_1		18
+#define TEGRA264_BWMGR_PCIE_2		19
+#define TEGRA264_BWMGR_PCIE_3		20
+#define TEGRA264_BWMGR_PCIE_4		21
+#define TEGRA264_BWMGR_PCIE_5		22
+#define TEGRA264_BWMGR_SDMMC_1		23
+#define TEGRA264_BWMGR_SDMMC_2		24
+#define TEGRA264_BWMGR_NVDEC		25
+#define TEGRA264_BWMGR_NVENC		26
+#define TEGRA264_BWMGR_NVJPG_0		27
+#define TEGRA264_BWMGR_NVJPG_1		28
+#define TEGRA264_BWMGR_OFAA		29
+#define TEGRA264_BWMGR_XUSB_HOST	30
+#define TEGRA264_BWMGR_XUSB_DEV		31
+#define TEGRA264_BWMGR_TSEC		32
+#define TEGRA264_BWMGR_VIC		33
+#define TEGRA264_BWMGR_APEDMA		34
+#define TEGRA264_BWMGR_SE		35
+#define TEGRA264_BWMGR_ISP		36
+#define TEGRA264_BWMGR_HDA		37
+#define TEGRA264_BWMGR_VI2FAL		38
+#define TEGRA264_BWMGR_VI2		39
+#define TEGRA264_BWMGR_RCE		40
+#define TEGRA264_BWMGR_PVA		41
+#define TEGRA264_BWMGR_NVPMODEL		42
+
+#endif

linux-7.2.3/drivers/memory/ti-aemif.c

@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI AEMIF driver
+ *
+ * Copyright (C) 2010 - 2013 Texas Instruments Incorporated. http://www.ti.com/
+ *
+ * Authors:
+ * Murali Karicheri <m-karicheri2@ti.com>
+ * Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/memory/ti-aemif.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define TA_SHIFT	2
+#define RHOLD_SHIFT	4
+#define RSTROBE_SHIFT	7
+#define RSETUP_SHIFT	13
+#define WHOLD_SHIFT	17
+#define WSTROBE_SHIFT	20
+#define WSETUP_SHIFT	26
+#define EW_SHIFT	30
+#define SSTROBE_SHIFT	31
+
+#define TA(x)		((x) << TA_SHIFT)
+#define RHOLD(x)	((x) << RHOLD_SHIFT)
+#define RSTROBE(x)	((x) << RSTROBE_SHIFT)
+#define RSETUP(x)	((x) << RSETUP_SHIFT)
+#define WHOLD(x)	((x) << WHOLD_SHIFT)
+#define WSTROBE(x)	((x) << WSTROBE_SHIFT)
+#define WSETUP(x)	((x) << WSETUP_SHIFT)
+#define EW(x)		((x) << EW_SHIFT)
+#define SSTROBE(x)	((x) << SSTROBE_SHIFT)
+
+#define ASIZE_MAX	0x1
+#define TA_MAX		0x3
+#define RHOLD_MAX	0x7
+#define RSTROBE_MAX	0x3f
+#define RSETUP_MAX	0xf
+#define WHOLD_MAX	0x7
+#define WSTROBE_MAX	0x3f
+#define WSETUP_MAX	0xf
+#define EW_MAX		0x1
+#define SSTROBE_MAX	0x1
+#define NUM_CS		4
+
+#define TA_VAL(x)	(((x) & TA(TA_MAX)) >> TA_SHIFT)
+#define RHOLD_VAL(x)	(((x) & RHOLD(RHOLD_MAX)) >> RHOLD_SHIFT)
+#define RSTROBE_VAL(x)	(((x) & RSTROBE(RSTROBE_MAX)) >> RSTROBE_SHIFT)
+#define RSETUP_VAL(x)	(((x) & RSETUP(RSETUP_MAX)) >> RSETUP_SHIFT)
+#define WHOLD_VAL(x)	(((x) & WHOLD(WHOLD_MAX)) >> WHOLD_SHIFT)
+#define WSTROBE_VAL(x)	(((x) & WSTROBE(WSTROBE_MAX)) >> WSTROBE_SHIFT)
+#define WSETUP_VAL(x)	(((x) & WSETUP(WSETUP_MAX)) >> WSETUP_SHIFT)
+#define EW_VAL(x)	(((x) & EW(EW_MAX)) >> EW_SHIFT)
+#define SSTROBE_VAL(x)	(((x) & SSTROBE(SSTROBE_MAX)) >> SSTROBE_SHIFT)
+
+#define NRCSR_OFFSET	0x00
+#define AWCCR_OFFSET	0x04
+#define A1CR_OFFSET	0x10
+
+#define ACR_ASIZE_MASK	0x3
+#define ACR_EW_MASK	BIT(30)
+#define ACR_SSTROBE_MASK	BIT(31)
+#define ASIZE_16BIT	1
+
+#define TIMINGS_MASK	(TA(TA_MAX) | \
+			RHOLD(RHOLD_MAX) | \
+			RSTROBE(RSTROBE_MAX) |	\
+			RSETUP(RSETUP_MAX) | \
+			WHOLD(WHOLD_MAX) | \
+			WSTROBE(WSTROBE_MAX) | \
+			WSETUP(WSETUP_MAX))
+
+#define CONFIG_MASK	(EW(EW_MAX) | SSTROBE(SSTROBE_MAX) | ASIZE_MAX)
+
+/**
+ * struct aemif_cs_data: structure to hold CS parameters
+ * @timings: timings configuration
+ * @cs: chip-select number
+ * @enable_ss: enable/disable select strobe mode
+ * @enable_ew: enable/disable extended wait mode
+ * @asize: width of the asynchronous device's data bus
+ */
+struct aemif_cs_data {
+	struct aemif_cs_timings timings;
+	u8	cs;
+	u8	enable_ss;
+	u8	enable_ew;
+	u8	asize;
+};
+
+/**
+ * struct aemif_device: structure to hold device data
+ * @base: base address of AEMIF registers
+ * @clk: source clock
+ * @clk_rate: clock's rate in kHz
+ * @num_cs: number of assigned chip-selects
+ * @cs_offset: start number of cs nodes
+ * @cs_data: array of chip-select settings
+ * @config_cs_lock: lock used to access CS configuration
+ */
+struct aemif_device {
+	void __iomem *base;
+	struct clk *clk;
+	unsigned long clk_rate;
+	u8 num_cs;
+	int cs_offset;
+	struct aemif_cs_data cs_data[NUM_CS];
+	struct mutex config_cs_lock;
+};
+
+/**
+ * aemif_check_cs_timings() - Check the validity of a CS timing configuration.
+ * @timings: timings configuration
+ *
+ * @return: 0 if the timing configuration is valid, negative error number otherwise.
+ */
+int aemif_check_cs_timings(struct aemif_cs_timings *timings)
+{
+	if (timings->ta > TA_MAX)
+		return -EINVAL;
+
+	if (timings->rhold > RHOLD_MAX)
+		return -EINVAL;
+
+	if (timings->rstrobe > RSTROBE_MAX)
+		return -EINVAL;
+
+	if (timings->rsetup > RSETUP_MAX)
+		return -EINVAL;
+
+	if (timings->whold > WHOLD_MAX)
+		return -EINVAL;
+
+	if (timings->wstrobe > WSTROBE_MAX)
+		return -EINVAL;
+
+	if (timings->wsetup > WSETUP_MAX)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(aemif_check_cs_timings);
+
+/**
+ * aemif_set_cs_timings() - Set the timing configuration of a given chip select.
+ * @aemif: aemif device to configure
+ * @cs: index of the chip select to configure
+ * @timings: timings configuration to set
+ *
+ * @return: 0 on success, else negative errno.
+ */
+int aemif_set_cs_timings(struct aemif_device *aemif, u8 cs,
+			 struct aemif_cs_timings *timings)
+{
+	unsigned int offset;
+	u32 val, set;
+	int ret;
+
+	if (!timings || !aemif)
+		return -EINVAL;
+
+	if (cs > aemif->num_cs)
+		return -EINVAL;
+
+	ret = aemif_check_cs_timings(timings);
+	if (ret)
+		return ret;
+
+	set = TA(timings->ta) | RHOLD(timings->rhold) | RSTROBE(timings->rstrobe) |
+	      RSETUP(timings->rsetup) | WHOLD(timings->whold) |
+	      WSTROBE(timings->wstrobe) | WSETUP(timings->wsetup);
+
+	offset = A1CR_OFFSET + cs * 4;
+
+	mutex_lock(&aemif->config_cs_lock);
+	val = readl(aemif->base + offset);
+	val &= ~TIMINGS_MASK;
+	val |= set;
+	writel(val, aemif->base + offset);
+	mutex_unlock(&aemif->config_cs_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(aemif_set_cs_timings);
+
+/**
+ * aemif_calc_rate - calculate timing data.
+ * @pdev: platform device to calculate for
+ * @wanted: The cycle time needed in nanoseconds.
+ * @clk: The input clock rate in kHz.
+ *
+ * @return: the calculated timing value minus 1 for easy
+ * programming into AEMIF timing registers.
+ */
+static u32 aemif_calc_rate(struct platform_device *pdev, int wanted, unsigned long clk)
+{
+	int result;
+
+	result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1;
+
+	dev_dbg(&pdev->dev, "%s: result %d from %ld, %d\n", __func__, result,
+		clk, wanted);
+
+	/* It is generally OK to have a more relaxed timing than requested... */
+	if (result < 0)
+		result = 0;
+
+	return result;
+}
+
+/**
+ * aemif_config_abus - configure async bus parameters
+ * @pdev: platform device to configure for
+ * @csnum: aemif chip select number
+ *
+ * This function programs the given timing values (in real clock) into the
+ * AEMIF registers taking the AEMIF clock into account.
+ *
+ * This function does not use any locking while programming the AEMIF
+ * because it is expected that there is only one user of a given
+ * chip-select.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+static int aemif_config_abus(struct platform_device *pdev, int csnum)
+{
+	struct aemif_device *aemif = platform_get_drvdata(pdev);
+	struct aemif_cs_data *data = &aemif->cs_data[csnum];
+	unsigned offset;
+	u32 set, val;
+
+	offset = A1CR_OFFSET + (data->cs - aemif->cs_offset) * 4;
+
+	set = (data->asize & ACR_ASIZE_MASK);
+	if (data->enable_ew)
+		set |= ACR_EW_MASK;
+	if (data->enable_ss)
+		set |= ACR_SSTROBE_MASK;
+
+	mutex_lock(&aemif->config_cs_lock);
+	val = readl(aemif->base + offset);
+	val &= ~CONFIG_MASK;
+	val |= set;
+	writel(val, aemif->base + offset);
+	mutex_unlock(&aemif->config_cs_lock);
+
+	return aemif_set_cs_timings(aemif, data->cs - aemif->cs_offset, &data->timings);
+}
+
+/**
+ * aemif_get_hw_params - function to read hw register values
+ * @pdev: platform device to read for
+ * @csnum: aemif chip select number
+ *
+ * This function reads the defaults from the registers and update
+ * the timing values. Required for get/set commands and also for
+ * the case when driver needs to use defaults in hardware.
+ */
+static void aemif_get_hw_params(struct platform_device *pdev, int csnum)
+{
+	struct aemif_device *aemif = platform_get_drvdata(pdev);
+	struct aemif_cs_data *data = &aemif->cs_data[csnum];
+	u32 val, offset;
+
+	offset = A1CR_OFFSET + (data->cs - aemif->cs_offset) * 4;
+	val = readl(aemif->base + offset);
+
+	data->timings.ta = TA_VAL(val);
+	data->timings.rhold = RHOLD_VAL(val);
+	data->timings.rstrobe = RSTROBE_VAL(val);
+	data->timings.rsetup = RSETUP_VAL(val);
+	data->timings.whold = WHOLD_VAL(val);
+	data->timings.wstrobe = WSTROBE_VAL(val);
+	data->timings.wsetup = WSETUP_VAL(val);
+	data->enable_ew = EW_VAL(val);
+	data->enable_ss = SSTROBE_VAL(val);
+	data->asize = val & ASIZE_MAX;
+}
+
+/**
+ * of_aemif_parse_abus_config - parse CS configuration from DT
+ * @pdev: platform device to parse for
+ * @np: device node ptr
+ *
+ * This function update the emif async bus configuration based on the values
+ * configured in a cs device binding node.
+ */
+static int of_aemif_parse_abus_config(struct platform_device *pdev,
+				      struct device_node *np)
+{
+	struct aemif_device *aemif = platform_get_drvdata(pdev);
+	unsigned long clk_rate = aemif->clk_rate;
+	struct aemif_cs_data *data;
+	u32 cs;
+	u32 val;
+
+	if (of_property_read_u32(np, "ti,cs-chipselect", &cs)) {
+		dev_dbg(&pdev->dev, "cs property is required");
+		return -EINVAL;
+	}
+
+	if (cs - aemif->cs_offset >= NUM_CS || cs < aemif->cs_offset) {
+		dev_dbg(&pdev->dev, "cs number is incorrect %d", cs);
+		return -EINVAL;
+	}
+
+	if (aemif->num_cs >= NUM_CS) {
+		dev_dbg(&pdev->dev, "cs count is more than %d", NUM_CS);
+		return -EINVAL;
+	}
+
+	data = &aemif->cs_data[aemif->num_cs];
+	data->cs = cs;
+
+	/* read the current value in the hw register */
+	aemif_get_hw_params(pdev, aemif->num_cs++);
+
+	/* override the values from device node */
+	if (!of_property_read_u32(np, "ti,cs-min-turnaround-ns", &val))
+		data->timings.ta = aemif_calc_rate(pdev, val, clk_rate);
+
+	if (!of_property_read_u32(np, "ti,cs-read-hold-ns", &val))
+		data->timings.rhold = aemif_calc_rate(pdev, val, clk_rate);
+
+	if (!of_property_read_u32(np, "ti,cs-read-strobe-ns", &val))
+		data->timings.rstrobe = aemif_calc_rate(pdev, val, clk_rate);
+
+	if (!of_property_read_u32(np, "ti,cs-read-setup-ns", &val))
+		data->timings.rsetup = aemif_calc_rate(pdev, val, clk_rate);
+
+	if (!of_property_read_u32(np, "ti,cs-write-hold-ns", &val))
+		data->timings.whold = aemif_calc_rate(pdev, val, clk_rate);
+
+	if (!of_property_read_u32(np, "ti,cs-write-strobe-ns", &val))
+		data->timings.wstrobe = aemif_calc_rate(pdev, val, clk_rate);
+
+	if (!of_property_read_u32(np, "ti,cs-write-setup-ns", &val))
+		data->timings.wsetup = aemif_calc_rate(pdev, val, clk_rate);
+
+	if (!of_property_read_u32(np, "ti,cs-bus-width", &val))
+		if (val == 16)
+			data->asize = 1;
+	data->enable_ew = of_property_read_bool(np, "ti,cs-extended-wait-mode");
+	data->enable_ss = of_property_read_bool(np, "ti,cs-select-strobe-mode");
+
+	return aemif_check_cs_timings(&data->timings);
+}
+
+static const struct of_device_id aemif_of_match[] = {
+	{ .compatible = "ti,davinci-aemif", },
+	{ .compatible = "ti,da850-aemif", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, aemif_of_match);
+
+static int aemif_probe(struct platform_device *pdev)
+{
+	int i;
+	int ret = -ENODEV;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct aemif_device *aemif;
+
+	aemif = devm_kzalloc(dev, sizeof(*aemif), GFP_KERNEL);
+	if (!aemif)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, aemif);
+
+	aemif->clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(aemif->clk))
+		return dev_err_probe(dev, PTR_ERR(aemif->clk),
+				     "cannot get clock 'aemif'\n");
+
+	aemif->clk_rate = clk_get_rate(aemif->clk) / MSEC_PER_SEC;
+
+	if (np && of_device_is_compatible(np, "ti,da850-aemif"))
+		aemif->cs_offset = 2;
+
+	aemif->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(aemif->base))
+		return PTR_ERR(aemif->base);
+
+	mutex_init(&aemif->config_cs_lock);
+	if (np) {
+		/*
+		 * For every controller device node, there is a cs device node
+		 * that describe the bus configuration parameters. This
+		 * functions iterate over these nodes and update the cs data
+		 * array.
+		 */
+		for_each_available_child_of_node_scoped(np, child_np) {
+			ret = of_aemif_parse_abus_config(pdev, child_np);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	for (i = 0; i < aemif->num_cs; i++) {
+		ret = aemif_config_abus(pdev, i);
+		if (ret < 0) {
+			dev_err(dev, "Error configuring chip select %d\n",
+				aemif->cs_data[i].cs);
+			return ret;
+		}
+	}
+
+	/*
+	 * Create a child devices explicitly from here to guarantee that the
+	 * child will be probed after the AEMIF timing parameters are set.
+	 */
+	if (np) {
+		for_each_available_child_of_node_scoped(np, child_np) {
+			ret = of_platform_populate(child_np, NULL, NULL, dev);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver aemif_driver = {
+	.probe = aemif_probe,
+	.driver = {
+		.name = "ti-aemif",
+		.of_match_table = of_match_ptr(aemif_of_match),
+	},
+};
+
+module_platform_driver(aemif_driver);
+
+MODULE_AUTHOR("Murali Karicheri <m-karicheri2@ti.com>");
+MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>");
+MODULE_DESCRIPTION("Texas Instruments AEMIF driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" KBUILD_MODNAME);

linux-7.2.3/drivers/memory/ti-emif-pm.c

@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI AM33XX SRAM EMIF Driver
+ *
+ * Copyright (C) 2016-2017 Texas Instruments Inc.
+ *	Dave Gerlach
+ */
+
+#include <linux/err.h>
+#include <linux/genalloc.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/sram.h>
+#include <linux/ti-emif-sram.h>
+
+#include "emif.h"
+
+#define TI_EMIF_SRAM_SYMBOL_OFFSET(sym) ((unsigned long)(sym) - \
+					 (unsigned long)&ti_emif_sram)
+
+#define EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES		0x00a0
+
+struct ti_emif_data {
+	phys_addr_t ti_emif_sram_phys;
+	phys_addr_t ti_emif_sram_data_phys;
+	unsigned long ti_emif_sram_virt;
+	unsigned long ti_emif_sram_data_virt;
+	struct gen_pool *sram_pool_code;
+	struct gen_pool	*sram_pool_data;
+	struct ti_emif_pm_data pm_data;
+	struct ti_emif_pm_functions pm_functions;
+};
+
+static struct ti_emif_data *emif_instance;
+
+static u32 sram_suspend_address(struct ti_emif_data *emif_data,
+				unsigned long addr)
+{
+	return (emif_data->ti_emif_sram_virt +
+		TI_EMIF_SRAM_SYMBOL_OFFSET(addr));
+}
+
+static phys_addr_t sram_resume_address(struct ti_emif_data *emif_data,
+				       unsigned long addr)
+{
+	return ((unsigned long)emif_data->ti_emif_sram_phys +
+		TI_EMIF_SRAM_SYMBOL_OFFSET(addr));
+}
+
+static void ti_emif_free_sram(struct ti_emif_data *emif_data)
+{
+	gen_pool_free(emif_data->sram_pool_code, emif_data->ti_emif_sram_virt,
+		      ti_emif_sram_sz);
+	gen_pool_free(emif_data->sram_pool_data,
+		      emif_data->ti_emif_sram_data_virt,
+		      sizeof(struct emif_regs_amx3));
+}
+
+static int ti_emif_alloc_sram(struct device *dev,
+			      struct ti_emif_data *emif_data)
+{
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	emif_data->sram_pool_code = of_gen_pool_get(np, "sram", 0);
+	if (!emif_data->sram_pool_code) {
+		dev_err(dev, "Unable to get sram pool for ocmcram code\n");
+		return -ENODEV;
+	}
+
+	emif_data->ti_emif_sram_virt =
+			gen_pool_alloc(emif_data->sram_pool_code,
+				       ti_emif_sram_sz);
+	if (!emif_data->ti_emif_sram_virt) {
+		dev_err(dev, "Unable to allocate code memory from ocmcram\n");
+		return -ENOMEM;
+	}
+
+	/* Save physical address to calculate resume offset during pm init */
+	emif_data->ti_emif_sram_phys =
+			gen_pool_virt_to_phys(emif_data->sram_pool_code,
+					      emif_data->ti_emif_sram_virt);
+
+	/* Get sram pool for data section and allocate space */
+	emif_data->sram_pool_data = of_gen_pool_get(np, "sram", 1);
+	if (!emif_data->sram_pool_data) {
+		dev_err(dev, "Unable to get sram pool for ocmcram data\n");
+		ret = -ENODEV;
+		goto err_free_sram_code;
+	}
+
+	emif_data->ti_emif_sram_data_virt =
+				gen_pool_alloc(emif_data->sram_pool_data,
+					       sizeof(struct emif_regs_amx3));
+	if (!emif_data->ti_emif_sram_data_virt) {
+		dev_err(dev, "Unable to allocate data memory from ocmcram\n");
+		ret = -ENOMEM;
+		goto err_free_sram_code;
+	}
+
+	/* Save physical address to calculate resume offset during pm init */
+	emif_data->ti_emif_sram_data_phys =
+		gen_pool_virt_to_phys(emif_data->sram_pool_data,
+				      emif_data->ti_emif_sram_data_virt);
+	/*
+	 * These functions are called during suspend path while MMU is
+	 * still on so add virtual base to offset for absolute address
+	 */
+	emif_data->pm_functions.save_context =
+		sram_suspend_address(emif_data,
+				     (unsigned long)ti_emif_save_context);
+	emif_data->pm_functions.enter_sr =
+		sram_suspend_address(emif_data,
+				     (unsigned long)ti_emif_enter_sr);
+	emif_data->pm_functions.abort_sr =
+		sram_suspend_address(emif_data,
+				     (unsigned long)ti_emif_abort_sr);
+
+	/*
+	 * These are called during resume path when MMU is not enabled
+	 * so physical address is used instead
+	 */
+	emif_data->pm_functions.restore_context =
+		sram_resume_address(emif_data,
+				    (unsigned long)ti_emif_restore_context);
+	emif_data->pm_functions.exit_sr =
+		sram_resume_address(emif_data,
+				    (unsigned long)ti_emif_exit_sr);
+	emif_data->pm_functions.run_hw_leveling =
+		sram_resume_address(emif_data,
+				    (unsigned long)ti_emif_run_hw_leveling);
+
+	emif_data->pm_data.regs_virt =
+		(struct emif_regs_amx3 *)emif_data->ti_emif_sram_data_virt;
+	emif_data->pm_data.regs_phys = emif_data->ti_emif_sram_data_phys;
+
+	return 0;
+
+err_free_sram_code:
+	gen_pool_free(emif_data->sram_pool_code, emif_data->ti_emif_sram_virt,
+		      ti_emif_sram_sz);
+	return ret;
+}
+
+static int ti_emif_push_sram(struct device *dev, struct ti_emif_data *emif_data)
+{
+	void *copy_addr;
+	u32 data_addr;
+
+	copy_addr = sram_exec_copy(emif_data->sram_pool_code,
+				   (void *)emif_data->ti_emif_sram_virt,
+				   &ti_emif_sram, ti_emif_sram_sz);
+	if (!copy_addr) {
+		dev_err(dev, "Cannot copy emif code to sram\n");
+		return -ENODEV;
+	}
+
+	data_addr = sram_suspend_address(emif_data,
+					 (unsigned long)&ti_emif_pm_sram_data);
+	copy_addr = sram_exec_copy(emif_data->sram_pool_code,
+				   (void *)data_addr,
+				   &emif_data->pm_data,
+				   sizeof(emif_data->pm_data));
+	if (!copy_addr) {
+		dev_err(dev, "Cannot copy emif data to code sram\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/*
+ * Due to Usage Note 3.1.2 "DDR3: JEDEC Compliance for Maximum
+ * Self-Refresh Command Limit" found in AM335x Silicon Errata
+ * (Document SPRZ360F Revised November 2013) we must configure
+ * the self refresh delay timer to 0xA (8192 cycles) to avoid
+ * generating too many refresh command from the EMIF.
+ */
+static void ti_emif_configure_sr_delay(struct ti_emif_data *emif_data)
+{
+	writel(EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES,
+	       (emif_data->pm_data.ti_emif_base_addr_virt +
+		EMIF_POWER_MANAGEMENT_CONTROL));
+
+	writel(EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES,
+	       (emif_data->pm_data.ti_emif_base_addr_virt +
+		EMIF_POWER_MANAGEMENT_CTRL_SHDW));
+}
+
+/**
+ * ti_emif_copy_pm_function_table - copy mapping of pm funcs in sram
+ * @sram_pool: pointer to struct gen_pool where dst resides
+ * @dst: void * to address that table should be copied
+ *
+ * Returns 0 if success other error code if table is not available
+ */
+int ti_emif_copy_pm_function_table(struct gen_pool *sram_pool, void *dst)
+{
+	void *copy_addr;
+
+	if (!emif_instance)
+		return -ENODEV;
+
+	copy_addr = sram_exec_copy(sram_pool, dst,
+				   &emif_instance->pm_functions,
+				   sizeof(emif_instance->pm_functions));
+	if (!copy_addr)
+		return -ENODEV;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ti_emif_copy_pm_function_table);
+
+/**
+ * ti_emif_get_mem_type - return type for memory type in use
+ *
+ * Returns memory type value read from EMIF or error code if fails
+ */
+int ti_emif_get_mem_type(void)
+{
+	unsigned long temp;
+
+	if (!emif_instance)
+		return -ENODEV;
+
+	temp = readl(emif_instance->pm_data.ti_emif_base_addr_virt +
+		     EMIF_SDRAM_CONFIG);
+
+	temp = (temp & SDRAM_TYPE_MASK) >> SDRAM_TYPE_SHIFT;
+	return temp;
+}
+EXPORT_SYMBOL_GPL(ti_emif_get_mem_type);
+
+static const struct of_device_id ti_emif_of_match[] = {
+	{ .compatible = "ti,emif-am3352", .data =
+					(void *)EMIF_SRAM_AM33_REG_LAYOUT, },
+	{ .compatible = "ti,emif-am4372", .data =
+					(void *)EMIF_SRAM_AM43_REG_LAYOUT, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ti_emif_of_match);
+
+#ifdef CONFIG_PM_SLEEP
+static int ti_emif_resume(struct device *dev)
+{
+	unsigned long tmp =
+			__raw_readl((void __iomem *)emif_instance->ti_emif_sram_virt);
+
+	/*
+	 * Check to see if what we are copying is already present in the
+	 * first byte at the destination, only copy if it is not which
+	 * indicates we have lost context and sram no longer contains
+	 * the PM code
+	 */
+	if (tmp != ti_emif_sram)
+		ti_emif_push_sram(dev, emif_instance);
+
+	return 0;
+}
+
+static int ti_emif_suspend(struct device *dev)
+{
+	/*
+	 * The contents will be present in DDR hence no need to
+	 * explicitly save
+	 */
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static int ti_emif_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct ti_emif_data *emif_data;
+
+	emif_data = devm_kzalloc(dev, sizeof(*emif_data), GFP_KERNEL);
+	if (!emif_data)
+		return -ENOMEM;
+
+	emif_data->pm_data.ti_emif_sram_config = (unsigned long) device_get_match_data(&pdev->dev);
+
+	emif_data->pm_data.ti_emif_base_addr_virt = devm_platform_get_and_ioremap_resource(pdev,
+											   0,
+											   &res);
+	if (IS_ERR(emif_data->pm_data.ti_emif_base_addr_virt)) {
+		ret = PTR_ERR(emif_data->pm_data.ti_emif_base_addr_virt);
+		return ret;
+	}
+
+	emif_data->pm_data.ti_emif_base_addr_phys = res->start;
+
+	ti_emif_configure_sr_delay(emif_data);
+
+	ret = ti_emif_alloc_sram(dev, emif_data);
+	if (ret)
+		return ret;
+
+	ret = ti_emif_push_sram(dev, emif_data);
+	if (ret)
+		goto fail_free_sram;
+
+	emif_instance = emif_data;
+
+	return 0;
+
+fail_free_sram:
+	ti_emif_free_sram(emif_data);
+
+	return ret;
+}
+
+static void ti_emif_remove(struct platform_device *pdev)
+{
+	struct ti_emif_data *emif_data = emif_instance;
+
+	emif_instance = NULL;
+
+	ti_emif_free_sram(emif_data);
+}
+
+static const struct dev_pm_ops ti_emif_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ti_emif_suspend, ti_emif_resume)
+};
+
+static struct platform_driver ti_emif_driver = {
+	.probe = ti_emif_probe,
+	.remove = ti_emif_remove,
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = ti_emif_of_match,
+		.pm = &ti_emif_pm_ops,
+	},
+};
+module_platform_driver(ti_emif_driver);
+
+MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>");
+MODULE_DESCRIPTION("Texas Instruments SRAM EMIF driver");
+MODULE_LICENSE("GPL v2");

linux-7.2.3/drivers/memory/ti-emif-sram-pm.S

@@ -0,0 +1,368 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Low level PM code for TI EMIF
+ *
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *	Dave Gerlach
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/page.h>
+
+#include "emif.h"
+#include "ti-emif-asm-offsets.h"
+
+#define EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES	0x00a0
+#define EMIF_POWER_MGMT_SR_TIMER_MASK			0x00f0
+#define EMIF_POWER_MGMT_SELF_REFRESH_MODE		0x0200
+#define EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK		0x0700
+
+#define EMIF_SDCFG_TYPE_DDR2				0x2 << SDRAM_TYPE_SHIFT
+#define EMIF_SDCFG_TYPE_DDR3				0x3 << SDRAM_TYPE_SHIFT
+#define EMIF_STATUS_READY				0x4
+
+#define AM43XX_EMIF_PHY_CTRL_REG_COUNT                  0x120
+
+#define EMIF_AM437X_REGISTERS				0x1
+
+	.arm
+	.align 3
+	.arch armv7-a
+
+ENTRY(ti_emif_sram)
+
+/*
+ * void ti_emif_save_context(void)
+ *
+ * Used during suspend to save the context of all required EMIF registers
+ * to local memory if the EMIF is going to lose context during the sleep
+ * transition. Operates on the VIRTUAL address of the EMIF.
+ */
+ENTRY(ti_emif_save_context)
+	stmfd   sp!, {r4 - r11, lr}     @ save registers on stack
+
+	adr	r4, ti_emif_pm_sram_data
+	ldr	r0, [r4, #EMIF_PM_BASE_ADDR_VIRT_OFFSET]
+	ldr	r2, [r4, #EMIF_PM_REGS_VIRT_OFFSET]
+
+	/* Save EMIF configuration */
+	ldr	r1, [r0, #EMIF_SDRAM_CONFIG]
+	str	r1, [r2, #EMIF_SDCFG_VAL_OFFSET]
+
+	ldr	r1, [r0, #EMIF_SDRAM_REFRESH_CONTROL]
+	str	r1, [r2, #EMIF_REF_CTRL_VAL_OFFSET]
+
+	ldr	r1, [r0, #EMIF_SDRAM_TIMING_1]
+	str     r1, [r2, #EMIF_TIMING1_VAL_OFFSET]
+
+	ldr	r1, [r0, #EMIF_SDRAM_TIMING_2]
+	str     r1, [r2, #EMIF_TIMING2_VAL_OFFSET]
+
+	ldr	r1, [r0, #EMIF_SDRAM_TIMING_3]
+	str     r1, [r2, #EMIF_TIMING3_VAL_OFFSET]
+
+	ldr	r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL]
+	str     r1, [r2, #EMIF_PMCR_VAL_OFFSET]
+
+	ldr	r1, [r0, #EMIF_POWER_MANAGEMENT_CTRL_SHDW]
+	str     r1, [r2, #EMIF_PMCR_SHDW_VAL_OFFSET]
+
+	ldr	r1, [r0, #EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG]
+	str     r1, [r2, #EMIF_ZQCFG_VAL_OFFSET]
+
+	ldr	r1, [r0, #EMIF_DDR_PHY_CTRL_1]
+	str     r1, [r2, #EMIF_DDR_PHY_CTLR_1_OFFSET]
+
+	ldr	r1, [r0, #EMIF_COS_CONFIG]
+	str     r1, [r2, #EMIF_COS_CONFIG_OFFSET]
+
+	ldr	r1, [r0, #EMIF_PRIORITY_TO_CLASS_OF_SERVICE_MAPPING]
+	str     r1, [r2, #EMIF_PRIORITY_TO_COS_MAPPING_OFFSET]
+
+	ldr	r1, [r0, #EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_1_MAPPING]
+	str     r1, [r2, #EMIF_CONNECT_ID_SERV_1_MAP_OFFSET]
+
+	ldr	r1, [r0, #EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_2_MAPPING]
+	str     r1, [r2, #EMIF_CONNECT_ID_SERV_2_MAP_OFFSET]
+
+	ldr	r1, [r0, #EMIF_OCP_CONFIG]
+	str     r1, [r2, #EMIF_OCP_CONFIG_VAL_OFFSET]
+
+	ldr	r5, [r4, #EMIF_PM_CONFIG_OFFSET]
+	cmp	r5, #EMIF_SRAM_AM43_REG_LAYOUT
+	bne	emif_skip_save_extra_regs
+
+	ldr	r1, [r0, #EMIF_READ_WRITE_LEVELING_RAMP_CONTROL]
+	str     r1, [r2, #EMIF_RD_WR_LEVEL_RAMP_CTRL_OFFSET]
+
+	ldr	r1, [r0, #EMIF_READ_WRITE_EXECUTION_THRESHOLD]
+	str     r1, [r2, #EMIF_RD_WR_EXEC_THRESH_OFFSET]
+
+	ldr	r1, [r0, #EMIF_LPDDR2_NVM_TIMING]
+	str     r1, [r2, #EMIF_LPDDR2_NVM_TIM_OFFSET]
+
+	ldr	r1, [r0, #EMIF_LPDDR2_NVM_TIMING_SHDW]
+	str     r1, [r2, #EMIF_LPDDR2_NVM_TIM_SHDW_OFFSET]
+
+	ldr	r1, [r0, #EMIF_DLL_CALIB_CTRL]
+	str     r1, [r2, #EMIF_DLL_CALIB_CTRL_VAL_OFFSET]
+
+	ldr	r1, [r0, #EMIF_DLL_CALIB_CTRL_SHDW]
+	str     r1, [r2, #EMIF_DLL_CALIB_CTRL_VAL_SHDW_OFFSET]
+
+	/* Loop and save entire block of emif phy regs */
+	mov	r5, #0x0
+	add	r4, r2, #EMIF_EXT_PHY_CTRL_VALS_OFFSET
+	add	r3, r0, #EMIF_EXT_PHY_CTRL_1
+ddr_phy_ctrl_save:
+	ldr	r1, [r3, r5]
+	str	r1, [r4, r5]
+	add	r5, r5, #0x4
+	cmp	r5, #AM43XX_EMIF_PHY_CTRL_REG_COUNT
+	bne	ddr_phy_ctrl_save
+
+emif_skip_save_extra_regs:
+	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
+ENDPROC(ti_emif_save_context)
+
+/*
+ * void ti_emif_restore_context(void)
+ *
+ * Used during resume to restore the context of all required EMIF registers
+ * from local memory after the EMIF has lost context during a sleep transition.
+ * Operates on the PHYSICAL address of the EMIF.
+ */
+ENTRY(ti_emif_restore_context)
+	adr	r4, ti_emif_pm_sram_data
+	ldr	r0, [r4, #EMIF_PM_BASE_ADDR_PHYS_OFFSET]
+	ldr	r2, [r4, #EMIF_PM_REGS_PHYS_OFFSET]
+
+	/* Config EMIF Timings */
+	ldr     r1, [r2, #EMIF_DDR_PHY_CTLR_1_OFFSET]
+	str	r1, [r0, #EMIF_DDR_PHY_CTRL_1]
+	str	r1, [r0, #EMIF_DDR_PHY_CTRL_1_SHDW]
+
+	ldr     r1, [r2, #EMIF_TIMING1_VAL_OFFSET]
+	str	r1, [r0, #EMIF_SDRAM_TIMING_1]
+	str	r1, [r0, #EMIF_SDRAM_TIMING_1_SHDW]
+
+	ldr     r1, [r2, #EMIF_TIMING2_VAL_OFFSET]
+	str	r1, [r0, #EMIF_SDRAM_TIMING_2]
+	str	r1, [r0, #EMIF_SDRAM_TIMING_2_SHDW]
+
+	ldr     r1, [r2, #EMIF_TIMING3_VAL_OFFSET]
+	str	r1, [r0, #EMIF_SDRAM_TIMING_3]
+	str	r1, [r0, #EMIF_SDRAM_TIMING_3_SHDW]
+
+	ldr     r1, [r2, #EMIF_REF_CTRL_VAL_OFFSET]
+	str	r1, [r0, #EMIF_SDRAM_REFRESH_CONTROL]
+	str	r1, [r0, #EMIF_SDRAM_REFRESH_CTRL_SHDW]
+
+	ldr     r1, [r2, #EMIF_PMCR_VAL_OFFSET]
+	str	r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL]
+
+	ldr     r1, [r2, #EMIF_PMCR_SHDW_VAL_OFFSET]
+	str	r1, [r0, #EMIF_POWER_MANAGEMENT_CTRL_SHDW]
+
+	ldr     r1, [r2, #EMIF_COS_CONFIG_OFFSET]
+	str	r1, [r0, #EMIF_COS_CONFIG]
+
+	ldr     r1, [r2, #EMIF_PRIORITY_TO_COS_MAPPING_OFFSET]
+	str	r1, [r0, #EMIF_PRIORITY_TO_CLASS_OF_SERVICE_MAPPING]
+
+	ldr	r1, [r2, #EMIF_CONNECT_ID_SERV_1_MAP_OFFSET]
+	str	r1, [r0, #EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_1_MAPPING]
+
+	ldr     r1, [r2, #EMIF_CONNECT_ID_SERV_2_MAP_OFFSET]
+	str	r1, [r0, #EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_2_MAPPING]
+
+	ldr     r1, [r2, #EMIF_OCP_CONFIG_VAL_OFFSET]
+	str	r1, [r0, #EMIF_OCP_CONFIG]
+
+	ldr	r5, [r4, #EMIF_PM_CONFIG_OFFSET]
+	cmp	r5, #EMIF_SRAM_AM43_REG_LAYOUT
+	bne	emif_skip_restore_extra_regs
+
+	ldr     r1, [r2, #EMIF_RD_WR_LEVEL_RAMP_CTRL_OFFSET]
+	str	r1, [r0, #EMIF_READ_WRITE_LEVELING_RAMP_CONTROL]
+
+	ldr     r1, [r2, #EMIF_RD_WR_EXEC_THRESH_OFFSET]
+	str	r1, [r0, #EMIF_READ_WRITE_EXECUTION_THRESHOLD]
+
+	ldr     r1, [r2, #EMIF_LPDDR2_NVM_TIM_OFFSET]
+	str	r1, [r0, #EMIF_LPDDR2_NVM_TIMING]
+
+	ldr     r1, [r2, #EMIF_LPDDR2_NVM_TIM_SHDW_OFFSET]
+	str	r1, [r0, #EMIF_LPDDR2_NVM_TIMING_SHDW]
+
+	ldr     r1, [r2, #EMIF_DLL_CALIB_CTRL_VAL_OFFSET]
+	str	r1, [r0, #EMIF_DLL_CALIB_CTRL]
+
+	ldr     r1, [r2, #EMIF_DLL_CALIB_CTRL_VAL_SHDW_OFFSET]
+	str	r1, [r0, #EMIF_DLL_CALIB_CTRL_SHDW]
+
+	ldr     r1, [r2, #EMIF_ZQCFG_VAL_OFFSET]
+	str	r1, [r0, #EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG]
+
+	/* Loop and restore entire block of emif phy regs */
+	mov	r5, #0x0
+	/* Load ti_emif_regs_amx3 + EMIF_EXT_PHY_CTRL_VALS_OFFSET for address
+	 * to phy register save space
+	 */
+	add	r3, r2, #EMIF_EXT_PHY_CTRL_VALS_OFFSET
+	add	r4, r0, #EMIF_EXT_PHY_CTRL_1
+ddr_phy_ctrl_restore:
+	ldr	r1, [r3, r5]
+	str	r1, [r4, r5]
+	add	r5, r5, #0x4
+	cmp	r5, #AM43XX_EMIF_PHY_CTRL_REG_COUNT
+	bne	ddr_phy_ctrl_restore
+
+emif_skip_restore_extra_regs:
+	/*
+	 * Output impedence calib needed only for DDR3
+	 * but since the initial state of this will be
+	 * disabled for DDR2 no harm in restoring the
+	 * old configuration
+	 */
+	ldr     r1, [r2, #EMIF_ZQCFG_VAL_OFFSET]
+	str	r1, [r0, #EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG]
+
+	/* Write to sdcfg last for DDR2 only */
+	ldr	r1, [r2, #EMIF_SDCFG_VAL_OFFSET]
+	and	r2, r1, #SDRAM_TYPE_MASK
+	cmp	r2, #EMIF_SDCFG_TYPE_DDR2
+	streq	r1, [r0, #EMIF_SDRAM_CONFIG]
+
+	mov	pc, lr
+ENDPROC(ti_emif_restore_context)
+
+/*
+ * void ti_emif_run_hw_leveling(void)
+ *
+ * Used during resume to run hardware leveling again and restore the
+ * configuration of the EMIF PHY, only for DDR3.
+ */
+ENTRY(ti_emif_run_hw_leveling)
+	adr	r4, ti_emif_pm_sram_data
+	ldr	r0, [r4, #EMIF_PM_BASE_ADDR_PHYS_OFFSET]
+
+	ldr	r3, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL]
+	orr	r3, r3, #RDWRLVLFULL_START
+	ldr	r2, [r0, #EMIF_SDRAM_CONFIG]
+	and	r2, r2, #SDRAM_TYPE_MASK
+	cmp	r2, #EMIF_SDCFG_TYPE_DDR3
+	bne	skip_hwlvl
+
+	str	r3, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL]
+
+	/*
+	 * If EMIF registers are touched during initial stage of HW
+	 * leveling sequence there will be an L3 NOC timeout error issued
+	 * as the EMIF will not respond, which is not fatal, but it is
+	 * avoidable. This small wait loop is enough time for this condition
+	 * to clear, even at worst case of CPU running at max speed of 1Ghz.
+	 */
+	mov	r2, #0x2000
+1:
+	subs	r2, r2, #0x1
+	bne	1b
+
+	/* Bit clears when operation is complete */
+2:	ldr     r1, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL]
+	tst     r1, #RDWRLVLFULL_START
+	bne     2b
+
+skip_hwlvl:
+	mov	pc, lr
+ENDPROC(ti_emif_run_hw_leveling)
+
+/*
+ * void ti_emif_enter_sr(void)
+ *
+ * Programs the EMIF to tell the SDRAM to enter into self-refresh
+ * mode during a sleep transition. Operates on the VIRTUAL address
+ * of the EMIF.
+ */
+ENTRY(ti_emif_enter_sr)
+	stmfd   sp!, {r4 - r11, lr}     @ save registers on stack
+
+	adr	r4, ti_emif_pm_sram_data
+	ldr	r0, [r4, #EMIF_PM_BASE_ADDR_VIRT_OFFSET]
+	ldr	r2, [r4, #EMIF_PM_REGS_VIRT_OFFSET]
+
+	ldr	r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL]
+	bic	r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK
+	orr	r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE
+	str	r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL]
+
+	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
+ENDPROC(ti_emif_enter_sr)
+
+/*
+ * void ti_emif_exit_sr(void)
+ *
+ * Programs the EMIF to tell the SDRAM to exit self-refresh mode
+ * after a sleep transition. Operates on the PHYSICAL address of
+ * the EMIF.
+ */
+ENTRY(ti_emif_exit_sr)
+	adr	r4, ti_emif_pm_sram_data
+	ldr	r0, [r4, #EMIF_PM_BASE_ADDR_PHYS_OFFSET]
+	ldr	r2, [r4, #EMIF_PM_REGS_PHYS_OFFSET]
+
+	/*
+	 * Toggle EMIF to exit refresh mode:
+	 * if EMIF lost context, PWR_MGT_CTRL is currently 0, writing disable
+	 *   (0x0), wont do diddly squat! so do a toggle from SR(0x2) to disable
+	 *   (0x0) here.
+	 * *If* EMIF did not lose context, nothing broken as we write the same
+	 *   value(0x2) to reg before we write a disable (0x0).
+	 */
+	ldr	r1, [r2, #EMIF_PMCR_VAL_OFFSET]
+	bic	r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK
+	orr	r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE
+	str	r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL]
+	bic	r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK
+	str	r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL]
+
+        /* Wait for EMIF to become ready */
+1:	ldr     r1, [r0, #EMIF_STATUS]
+	tst     r1, #EMIF_STATUS_READY
+	beq     1b
+
+	mov	pc, lr
+ENDPROC(ti_emif_exit_sr)
+
+/*
+ * void ti_emif_abort_sr(void)
+ *
+ * Disables self-refresh after a failed transition to a low-power
+ * state so the kernel can jump back to DDR and follow abort path.
+ * Operates on the VIRTUAL address of the EMIF.
+ */
+ENTRY(ti_emif_abort_sr)
+	stmfd   sp!, {r4 - r11, lr}     @ save registers on stack
+
+	adr	r4, ti_emif_pm_sram_data
+	ldr	r0, [r4, #EMIF_PM_BASE_ADDR_VIRT_OFFSET]
+	ldr	r2, [r4, #EMIF_PM_REGS_VIRT_OFFSET]
+
+	ldr	r1, [r2, #EMIF_PMCR_VAL_OFFSET]
+	bic	r1, r1, #EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK
+	str	r1, [r0, #EMIF_POWER_MANAGEMENT_CONTROL]
+
+	/* Wait for EMIF to become ready */
+1:	ldr     r1, [r0, #EMIF_STATUS]
+	tst     r1, #EMIF_STATUS_READY
+	beq     1b
+
+	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
+ENDPROC(ti_emif_abort_sr)
+
+	.align 3
+ENTRY(ti_emif_pm_sram_data)
+	.space EMIF_PM_DATA_SIZE
+ENTRY(ti_emif_sram_sz)
+        .word   . - ti_emif_save_context