Resguardo inicial

linux-7.2.3/drivers/mtd/nand/raw/ingenic/Kconfig

@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MTD_NAND_JZ4780
+	tristate "JZ4780 NAND controller"
+	depends on MIPS || COMPILE_TEST
+	depends on JZ4780_NEMC
+	help
+	  Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
+	  based boards, using the BCH controller for hardware error correction.
+
+if MTD_NAND_JZ4780
+
+config MTD_NAND_INGENIC_ECC
+	bool
+
+config MTD_NAND_JZ4740_ECC
+	tristate "Hardware BCH support for JZ4740 SoC"
+	select MTD_NAND_INGENIC_ECC
+	help
+	  Enable this driver to support the Reed-Solomon error-correction
+	  hardware present on the JZ4740 SoC from Ingenic.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called jz4740-ecc.
+
+config MTD_NAND_JZ4725B_BCH
+	tristate "Hardware BCH support for JZ4725B SoC"
+	select MTD_NAND_INGENIC_ECC
+	help
+	  Enable this driver to support the BCH error-correction hardware
+	  present on the JZ4725B SoC from Ingenic.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called jz4725b-bch.
+
+config MTD_NAND_JZ4780_BCH
+	tristate "Hardware BCH support for JZ4780 SoC"
+	select MTD_NAND_INGENIC_ECC
+	help
+	  Enable this driver to support the BCH error-correction hardware
+	  present on the JZ4780 SoC from Ingenic.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called jz4780-bch.
+
+endif # MTD_NAND_JZ4780

linux-7.2.3/drivers/mtd/nand/raw/ingenic/Makefile

@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_MTD_NAND_JZ4780) += ingenic_nand.o
+
+ingenic_nand-y += ingenic_nand_drv.o
+ingenic_nand-$(CONFIG_MTD_NAND_INGENIC_ECC) += ingenic_ecc.o
+
+obj-$(CONFIG_MTD_NAND_JZ4740_ECC) += jz4740_ecc.o
+obj-$(CONFIG_MTD_NAND_JZ4725B_BCH) += jz4725b_bch.o
+obj-$(CONFIG_MTD_NAND_JZ4780_BCH) += jz4780_bch.o

linux-7.2.3/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c

@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx ECC common code
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+/**
+ * ingenic_ecc_calculate() - calculate ECC for a data buffer
+ * @ecc: ECC device.
+ * @params: ECC parameters.
+ * @buf: input buffer with raw data.
+ * @ecc_code: output buffer with ECC.
+ *
+ * Return: 0 on success, -ETIMEDOUT if timed out while waiting for ECC
+ * controller.
+ */
+int ingenic_ecc_calculate(struct ingenic_ecc *ecc,
+			  struct ingenic_ecc_params *params,
+			  const u8 *buf, u8 *ecc_code)
+{
+	return ecc->ops->calculate(ecc, params, buf, ecc_code);
+}
+
+/**
+ * ingenic_ecc_correct() - detect and correct bit errors
+ * @ecc: ECC device.
+ * @params: ECC parameters.
+ * @buf: raw data read from the chip.
+ * @ecc_code: ECC read from the chip.
+ *
+ * Given the raw data and the ECC read from the NAND device, detects and
+ * corrects errors in the data.
+ *
+ * Return: the number of bit errors corrected, -EBADMSG if there are too many
+ * errors to correct or -ETIMEDOUT if we timed out waiting for the controller.
+ */
+int ingenic_ecc_correct(struct ingenic_ecc *ecc,
+			struct ingenic_ecc_params *params,
+			u8 *buf, u8 *ecc_code)
+{
+	return ecc->ops->correct(ecc, params, buf, ecc_code);
+}
+
+/**
+ * ingenic_ecc_get() - get the ECC controller device
+ * @np: ECC device tree node.
+ *
+ * Gets the ECC controller device from the specified device tree node. The
+ * device must be released with ingenic_ecc_release() when it is no longer being
+ * used.
+ *
+ * Return: a pointer to ingenic_ecc, errors are encoded into the pointer.
+ * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
+ */
+static struct ingenic_ecc *ingenic_ecc_get(struct device_node *np)
+{
+	struct platform_device *pdev;
+	struct ingenic_ecc *ecc;
+	int ret;
+
+	pdev = of_find_device_by_node(np);
+	if (!pdev)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	if (!platform_get_drvdata(pdev)) {
+		put_device(&pdev->dev);
+		return ERR_PTR(-EPROBE_DEFER);
+	}
+
+	ecc = platform_get_drvdata(pdev);
+	ret = clk_prepare_enable(ecc->clk);
+	if (ret) {
+		put_device(&pdev->dev);
+		return ERR_PTR(ret);
+	}
+
+	return ecc;
+}
+
+/**
+ * of_ingenic_ecc_get() - get the ECC controller from a DT node
+ * @of_node: the node that contains an ecc-engine property.
+ *
+ * Get the ecc-engine property from the given device tree
+ * node and pass it to ingenic_ecc_get to do the work.
+ *
+ * Return: a pointer to ingenic_ecc, errors are encoded into the pointer.
+ * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
+ */
+struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *of_node)
+{
+	struct ingenic_ecc *ecc = NULL;
+	struct device_node *np;
+
+	np = of_parse_phandle(of_node, "ecc-engine", 0);
+
+	/*
+	 * If the ecc-engine property is not found, check for the deprecated
+	 * ingenic,bch-controller property
+	 */
+	if (!np)
+		np = of_parse_phandle(of_node, "ingenic,bch-controller", 0);
+
+	if (np) {
+		ecc = ingenic_ecc_get(np);
+		of_node_put(np);
+	}
+	return ecc;
+}
+
+/**
+ * ingenic_ecc_release() - release the ECC controller device
+ * @ecc: ECC device.
+ */
+void ingenic_ecc_release(struct ingenic_ecc *ecc)
+{
+	clk_disable_unprepare(ecc->clk);
+	put_device(ecc->dev);
+}
+
+int ingenic_ecc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ingenic_ecc *ecc;
+
+	ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
+	if (!ecc)
+		return -ENOMEM;
+
+	ecc->ops = device_get_match_data(dev);
+	if (!ecc->ops)
+		return -EINVAL;
+
+	ecc->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ecc->base))
+		return PTR_ERR(ecc->base);
+
+	ecc->ops->disable(ecc);
+
+	ecc->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(ecc->clk)) {
+		dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(ecc->clk));
+		return PTR_ERR(ecc->clk);
+	}
+
+	mutex_init(&ecc->lock);
+
+	ecc->dev = dev;
+	platform_set_drvdata(pdev, ecc);
+
+	return 0;
+}
+EXPORT_SYMBOL(ingenic_ecc_probe);

linux-7.2.3/drivers/mtd/nand/raw/ingenic/ingenic_ecc.h

@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__
+#define __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__
+
+#include <linux/compiler_types.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+#include <uapi/asm-generic/errno-base.h>
+
+struct clk;
+struct device;
+struct ingenic_ecc;
+struct platform_device;
+
+/**
+ * struct ingenic_ecc_params - ECC parameters
+ * @size: data bytes per ECC step.
+ * @bytes: ECC bytes per step.
+ * @strength: number of correctable bits per ECC step.
+ */
+struct ingenic_ecc_params {
+	int size;
+	int bytes;
+	int strength;
+};
+
+#if IS_ENABLED(CONFIG_MTD_NAND_INGENIC_ECC)
+int ingenic_ecc_calculate(struct ingenic_ecc *ecc,
+			  struct ingenic_ecc_params *params,
+			  const u8 *buf, u8 *ecc_code);
+int ingenic_ecc_correct(struct ingenic_ecc *ecc,
+			struct ingenic_ecc_params *params, u8 *buf,
+			u8 *ecc_code);
+
+void ingenic_ecc_release(struct ingenic_ecc *ecc);
+struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *np);
+#else /* CONFIG_MTD_NAND_INGENIC_ECC */
+static inline int ingenic_ecc_calculate(struct ingenic_ecc *ecc,
+			  struct ingenic_ecc_params *params,
+			  const u8 *buf, u8 *ecc_code)
+{
+	return -ENODEV;
+}
+
+static inline int ingenic_ecc_correct(struct ingenic_ecc *ecc,
+			struct ingenic_ecc_params *params, u8 *buf,
+			u8 *ecc_code)
+{
+	return -ENODEV;
+}
+
+static inline void ingenic_ecc_release(struct ingenic_ecc *ecc)
+{
+}
+
+static inline struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *np)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif /* CONFIG_MTD_NAND_INGENIC_ECC */
+
+struct ingenic_ecc_ops {
+	void (*disable)(struct ingenic_ecc *ecc);
+	int (*calculate)(struct ingenic_ecc *ecc,
+			 struct ingenic_ecc_params *params,
+			 const u8 *buf, u8 *ecc_code);
+	int (*correct)(struct ingenic_ecc *ecc,
+			struct ingenic_ecc_params *params,
+			u8 *buf, u8 *ecc_code);
+};
+
+struct ingenic_ecc {
+	struct device *dev;
+	const struct ingenic_ecc_ops *ops;
+	void __iomem *base;
+	struct clk *clk;
+	struct mutex lock;
+};
+
+int ingenic_ecc_probe(struct platform_device *pdev);
+
+#endif /* __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__ */

linux-7.2.3/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c

@@ -0,0 +1,561 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic JZ47xx NAND driver
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/jz4780-nemc.h>
+
+#include "ingenic_ecc.h"
+
+#define DRV_NAME	"ingenic-nand"
+
+struct jz_soc_info {
+	unsigned long data_offset;
+	unsigned long addr_offset;
+	unsigned long cmd_offset;
+	const struct mtd_ooblayout_ops *oob_layout;
+	bool oob_first;
+};
+
+struct ingenic_nand_cs {
+	unsigned int bank;
+	void __iomem *base;
+};
+
+struct ingenic_nfc {
+	struct device *dev;
+	struct ingenic_ecc *ecc;
+	const struct jz_soc_info *soc_info;
+	struct nand_controller controller;
+	unsigned int num_banks;
+	struct list_head chips;
+	struct ingenic_nand_cs cs[] __counted_by(num_banks);
+};
+
+struct ingenic_nand {
+	struct nand_chip chip;
+	struct list_head chip_list;
+
+	struct gpio_desc *busy_gpio;
+	struct gpio_desc *wp_gpio;
+	unsigned int reading: 1;
+};
+
+static inline struct ingenic_nand *to_ingenic_nand(struct mtd_info *mtd)
+{
+	return container_of(mtd_to_nand(mtd), struct ingenic_nand, chip);
+}
+
+static inline struct ingenic_nfc *to_ingenic_nfc(struct nand_controller *ctrl)
+{
+	return container_of(ctrl, struct ingenic_nfc, controller);
+}
+
+static int qi_lb60_ooblayout_ecc(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	if (section || !ecc->total)
+		return -ERANGE;
+
+	oobregion->length = ecc->total;
+	oobregion->offset = 12;
+
+	return 0;
+}
+
+static int qi_lb60_ooblayout_free(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = mtd->oobsize - ecc->total - 12;
+	oobregion->offset = 12 + ecc->total;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops qi_lb60_ooblayout_ops = {
+	.ecc = qi_lb60_ooblayout_ecc,
+	.free = qi_lb60_ooblayout_free,
+};
+
+static int jz4725b_ooblayout_ecc(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	if (section || !ecc->total)
+		return -ERANGE;
+
+	oobregion->length = ecc->total;
+	oobregion->offset = 3;
+
+	return 0;
+}
+
+static int jz4725b_ooblayout_free(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = mtd->oobsize - ecc->total - 3;
+	oobregion->offset = 3 + ecc->total;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops jz4725b_ooblayout_ops = {
+	.ecc = jz4725b_ooblayout_ecc,
+	.free = jz4725b_ooblayout_free,
+};
+
+static void ingenic_nand_ecc_hwctl(struct nand_chip *chip, int mode)
+{
+	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+
+	nand->reading = (mode == NAND_ECC_READ);
+}
+
+static int ingenic_nand_ecc_calculate(struct nand_chip *chip, const u8 *dat,
+				      u8 *ecc_code)
+{
+	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+	struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+	struct ingenic_ecc_params params;
+
+	/*
+	 * Don't need to generate the ECC when reading, the ECC engine does it
+	 * for us as part of decoding/correction.
+	 */
+	if (nand->reading)
+		return 0;
+
+	params.size = nand->chip.ecc.size;
+	params.bytes = nand->chip.ecc.bytes;
+	params.strength = nand->chip.ecc.strength;
+
+	return ingenic_ecc_calculate(nfc->ecc, &params, dat, ecc_code);
+}
+
+static int ingenic_nand_ecc_correct(struct nand_chip *chip, u8 *dat,
+				    u8 *read_ecc, u8 *calc_ecc)
+{
+	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+	struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+	struct ingenic_ecc_params params;
+
+	params.size = nand->chip.ecc.size;
+	params.bytes = nand->chip.ecc.bytes;
+	params.strength = nand->chip.ecc.strength;
+
+	return ingenic_ecc_correct(nfc->ecc, &params, dat, read_ecc);
+}
+
+static int ingenic_nand_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct ingenic_nfc *nfc = to_ingenic_nfc(chip->controller);
+	int eccbytes;
+
+	if (chip->ecc.strength == 4) {
+		/* JZ4740 uses 9 bytes of ECC to correct maximum 4 errors */
+		chip->ecc.bytes = 9;
+	} else {
+		chip->ecc.bytes = fls((1 + 8) * chip->ecc.size)	*
+				  (chip->ecc.strength / 8);
+	}
+
+	switch (chip->ecc.engine_type) {
+	case NAND_ECC_ENGINE_TYPE_ON_HOST:
+		if (!nfc->ecc) {
+			dev_err(nfc->dev, "HW ECC selected, but ECC controller not found\n");
+			return -ENODEV;
+		}
+
+		chip->ecc.hwctl = ingenic_nand_ecc_hwctl;
+		chip->ecc.calculate = ingenic_nand_ecc_calculate;
+		chip->ecc.correct = ingenic_nand_ecc_correct;
+		fallthrough;
+	case NAND_ECC_ENGINE_TYPE_SOFT:
+		dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
+			 (nfc->ecc) ? "hardware ECC" : "software ECC",
+			 chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
+		break;
+	case NAND_ECC_ENGINE_TYPE_NONE:
+		dev_info(nfc->dev, "not using ECC\n");
+		break;
+	default:
+		dev_err(nfc->dev, "ECC mode %d not supported\n",
+			chip->ecc.engine_type);
+		return -EINVAL;
+	}
+
+	/* The NAND core will generate the ECC layout for SW ECC */
+	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
+		return 0;
+
+	/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
+	eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
+
+	if (eccbytes > mtd->oobsize - 2) {
+		dev_err(nfc->dev,
+			"invalid ECC config: required %d ECC bytes, but only %d are available",
+			eccbytes, mtd->oobsize - 2);
+		return -EINVAL;
+	}
+
+	/*
+	 * The generic layout for BBT markers will most likely overlap with our
+	 * ECC bytes in the OOB, so move the BBT markers outside the OOB area.
+	 */
+	if (chip->bbt_options & NAND_BBT_USE_FLASH)
+		chip->bbt_options |= NAND_BBT_NO_OOB;
+
+	if (nfc->soc_info->oob_first)
+		chip->ecc.read_page = nand_read_page_hwecc_oob_first;
+
+	/* For legacy reasons we use a different layout on the qi,lb60 board. */
+	if (of_machine_is_compatible("qi,lb60"))
+		mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
+	else if (nfc->soc_info->oob_layout)
+		mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout);
+	else
+		mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
+
+	return 0;
+}
+
+static int ingenic_nand_exec_instr(struct nand_chip *chip,
+				   struct ingenic_nand_cs *cs,
+				   const struct nand_op_instr *instr)
+{
+	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+	struct ingenic_nfc *nfc = to_ingenic_nfc(chip->controller);
+	unsigned int i;
+
+	switch (instr->type) {
+	case NAND_OP_CMD_INSTR:
+		writeb(instr->ctx.cmd.opcode,
+		       cs->base + nfc->soc_info->cmd_offset);
+		return 0;
+	case NAND_OP_ADDR_INSTR:
+		for (i = 0; i < instr->ctx.addr.naddrs; i++)
+			writeb(instr->ctx.addr.addrs[i],
+			       cs->base + nfc->soc_info->addr_offset);
+		return 0;
+	case NAND_OP_DATA_IN_INSTR:
+		if (instr->ctx.data.force_8bit ||
+		    !(chip->options & NAND_BUSWIDTH_16))
+			ioread8_rep(cs->base + nfc->soc_info->data_offset,
+				    instr->ctx.data.buf.in,
+				    instr->ctx.data.len);
+		else
+			ioread16_rep(cs->base + nfc->soc_info->data_offset,
+				     instr->ctx.data.buf.in,
+				     instr->ctx.data.len);
+		return 0;
+	case NAND_OP_DATA_OUT_INSTR:
+		if (instr->ctx.data.force_8bit ||
+		    !(chip->options & NAND_BUSWIDTH_16))
+			iowrite8_rep(cs->base + nfc->soc_info->data_offset,
+				     instr->ctx.data.buf.out,
+				     instr->ctx.data.len);
+		else
+			iowrite16_rep(cs->base + nfc->soc_info->data_offset,
+				      instr->ctx.data.buf.out,
+				      instr->ctx.data.len);
+		return 0;
+	case NAND_OP_WAITRDY_INSTR:
+		if (!nand->busy_gpio)
+			return nand_soft_waitrdy(chip,
+						 instr->ctx.waitrdy.timeout_ms);
+
+		return nand_gpio_waitrdy(chip, nand->busy_gpio,
+					 instr->ctx.waitrdy.timeout_ms);
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int ingenic_nand_exec_op(struct nand_chip *chip,
+				const struct nand_operation *op,
+				bool check_only)
+{
+	struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip));
+	struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller);
+	struct ingenic_nand_cs *cs;
+	unsigned int i;
+	int ret = 0;
+
+	if (check_only)
+		return 0;
+
+	cs = &nfc->cs[op->cs];
+	jz4780_nemc_assert(nfc->dev, cs->bank, true);
+	for (i = 0; i < op->ninstrs; i++) {
+		ret = ingenic_nand_exec_instr(chip, cs, &op->instrs[i]);
+		if (ret)
+			break;
+
+		if (op->instrs[i].delay_ns)
+			ndelay(op->instrs[i].delay_ns);
+	}
+	jz4780_nemc_assert(nfc->dev, cs->bank, false);
+
+	return ret;
+}
+
+static const struct nand_controller_ops ingenic_nand_controller_ops = {
+	.attach_chip = ingenic_nand_attach_chip,
+	.exec_op = ingenic_nand_exec_op,
+};
+
+static int ingenic_nand_init_chip(struct platform_device *pdev,
+				  struct ingenic_nfc *nfc,
+				  struct device_node *np,
+				  unsigned int chipnr)
+{
+	struct device *dev = &pdev->dev;
+	struct ingenic_nand *nand;
+	struct ingenic_nand_cs *cs;
+	struct nand_chip *chip;
+	struct mtd_info *mtd;
+	const __be32 *reg;
+	int ret = 0;
+
+	cs = &nfc->cs[chipnr];
+
+	reg = of_get_property(np, "reg", NULL);
+	if (!reg)
+		return -EINVAL;
+
+	cs->bank = be32_to_cpu(*reg);
+
+	jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
+
+	cs->base = devm_platform_ioremap_resource(pdev, chipnr);
+	if (IS_ERR(cs->base))
+		return PTR_ERR(cs->base);
+
+	nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
+	if (!nand)
+		return -ENOMEM;
+
+	nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
+
+	if (IS_ERR(nand->busy_gpio)) {
+		ret = PTR_ERR(nand->busy_gpio);
+		dev_err(dev, "failed to request busy GPIO: %d\n", ret);
+		return ret;
+	}
+
+	nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
+
+	if (IS_ERR(nand->wp_gpio)) {
+		ret = PTR_ERR(nand->wp_gpio);
+		dev_err(dev, "failed to request WP GPIO: %d\n", ret);
+		return ret;
+	}
+
+	chip = &nand->chip;
+	mtd = nand_to_mtd(chip);
+	mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
+				   cs->bank);
+	if (!mtd->name)
+		return -ENOMEM;
+	mtd->dev.parent = dev;
+
+	chip->options = NAND_NO_SUBPAGE_WRITE;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
+	chip->controller = &nfc->controller;
+	nand_set_flash_node(chip, np);
+
+	chip->controller->ops = &ingenic_nand_controller_ops;
+	ret = nand_scan(chip, 1);
+	if (ret)
+		return ret;
+
+	ret = mtd_device_register(mtd, NULL, 0);
+	if (ret) {
+		nand_cleanup(chip);
+		return ret;
+	}
+
+	list_add_tail(&nand->chip_list, &nfc->chips);
+
+	return 0;
+}
+
+static void ingenic_nand_cleanup_chips(struct ingenic_nfc *nfc)
+{
+	struct ingenic_nand *ingenic_chip;
+	struct nand_chip *chip;
+	int ret;
+
+	while (!list_empty(&nfc->chips)) {
+		ingenic_chip = list_first_entry(&nfc->chips,
+						struct ingenic_nand, chip_list);
+		chip = &ingenic_chip->chip;
+		ret = mtd_device_unregister(nand_to_mtd(chip));
+		WARN_ON(ret);
+		nand_cleanup(chip);
+		list_del(&ingenic_chip->chip_list);
+	}
+}
+
+static int ingenic_nand_init_chips(struct ingenic_nfc *nfc,
+				   struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int i = 0;
+	int ret;
+	int num_chips = of_get_child_count(dev->of_node);
+
+	if (num_chips > nfc->num_banks) {
+		dev_err(dev, "found %d chips but only %d banks\n",
+			num_chips, nfc->num_banks);
+		return -EINVAL;
+	}
+
+	for_each_child_of_node_scoped(dev->of_node, np) {
+		ret = ingenic_nand_init_chip(pdev, nfc, np, i);
+		if (ret) {
+			ingenic_nand_cleanup_chips(nfc);
+			return ret;
+		}
+
+		i++;
+	}
+
+	return 0;
+}
+
+static int ingenic_nand_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	unsigned int num_banks;
+	struct ingenic_nfc *nfc;
+	int ret;
+
+	num_banks = jz4780_nemc_num_banks(dev);
+	if (num_banks == 0) {
+		dev_err(dev, "no banks found\n");
+		return -ENODEV;
+	}
+
+	nfc = devm_kzalloc(dev, struct_size(nfc, cs, num_banks), GFP_KERNEL);
+	if (!nfc)
+		return -ENOMEM;
+
+	nfc->soc_info = device_get_match_data(dev);
+	if (!nfc->soc_info)
+		return -EINVAL;
+
+	/*
+	 * Check for ECC HW before we call nand_scan_ident, to prevent us from
+	 * having to call it again if the ECC driver returns -EPROBE_DEFER.
+	 */
+	nfc->ecc = of_ingenic_ecc_get(dev->of_node);
+	if (IS_ERR(nfc->ecc))
+		return PTR_ERR(nfc->ecc);
+
+	nfc->dev = dev;
+	nfc->num_banks = num_banks;
+
+	nand_controller_init(&nfc->controller);
+	INIT_LIST_HEAD(&nfc->chips);
+
+	ret = ingenic_nand_init_chips(nfc, pdev);
+	if (ret) {
+		if (nfc->ecc)
+			ingenic_ecc_release(nfc->ecc);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, nfc);
+	return 0;
+}
+
+static void ingenic_nand_remove(struct platform_device *pdev)
+{
+	struct ingenic_nfc *nfc = platform_get_drvdata(pdev);
+
+	if (nfc->ecc)
+		ingenic_ecc_release(nfc->ecc);
+
+	ingenic_nand_cleanup_chips(nfc);
+}
+
+static const struct jz_soc_info jz4740_soc_info = {
+	.data_offset = 0x00000000,
+	.cmd_offset = 0x00008000,
+	.addr_offset = 0x00010000,
+	.oob_first = true,
+};
+
+static const struct jz_soc_info jz4725b_soc_info = {
+	.data_offset = 0x00000000,
+	.cmd_offset = 0x00008000,
+	.addr_offset = 0x00010000,
+	.oob_layout = &jz4725b_ooblayout_ops,
+};
+
+static const struct jz_soc_info jz4780_soc_info = {
+	.data_offset = 0x00000000,
+	.cmd_offset = 0x00400000,
+	.addr_offset = 0x00800000,
+};
+
+static const struct of_device_id ingenic_nand_dt_match[] = {
+	{ .compatible = "ingenic,jz4740-nand", .data = &jz4740_soc_info },
+	{ .compatible = "ingenic,jz4725b-nand", .data = &jz4725b_soc_info },
+	{ .compatible = "ingenic,jz4780-nand", .data = &jz4780_soc_info },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ingenic_nand_dt_match);
+
+static struct platform_driver ingenic_nand_driver = {
+	.probe		= ingenic_nand_probe,
+	.remove		= ingenic_nand_remove,
+	.driver	= {
+		.name	= DRV_NAME,
+		.of_match_table = ingenic_nand_dt_match,
+	},
+};
+module_platform_driver(ingenic_nand_driver);
+
+MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
+MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
+MODULE_DESCRIPTION("Ingenic JZ47xx NAND driver");
+MODULE_LICENSE("GPL v2");

linux-7.2.3/drivers/mtd/nand/raw/ingenic/jz4725b_bch.c

@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4725B BCH controller driver
+ *
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ *
+ * Based on jz4780_bch.c
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+#define BCH_BHCR			0x0
+#define BCH_BHCSR			0x4
+#define BCH_BHCCR			0x8
+#define BCH_BHCNT			0xc
+#define BCH_BHDR			0x10
+#define BCH_BHPAR0			0x14
+#define BCH_BHERR0			0x28
+#define BCH_BHINT			0x24
+#define BCH_BHINTES			0x3c
+#define BCH_BHINTEC			0x40
+#define BCH_BHINTE			0x38
+
+#define BCH_BHCR_ENCE			BIT(3)
+#define BCH_BHCR_BSEL			BIT(2)
+#define BCH_BHCR_INIT			BIT(1)
+#define BCH_BHCR_BCHE			BIT(0)
+
+#define BCH_BHCNT_DEC_COUNT_SHIFT	16
+#define BCH_BHCNT_DEC_COUNT_MASK	(0x3ff << BCH_BHCNT_DEC_COUNT_SHIFT)
+#define BCH_BHCNT_ENC_COUNT_SHIFT	0
+#define BCH_BHCNT_ENC_COUNT_MASK	(0x3ff << BCH_BHCNT_ENC_COUNT_SHIFT)
+
+#define BCH_BHERR_INDEX0_SHIFT		0
+#define BCH_BHERR_INDEX0_MASK		(0x1fff << BCH_BHERR_INDEX0_SHIFT)
+#define BCH_BHERR_INDEX1_SHIFT		16
+#define BCH_BHERR_INDEX1_MASK		(0x1fff << BCH_BHERR_INDEX1_SHIFT)
+
+#define BCH_BHINT_ERRC_SHIFT		28
+#define BCH_BHINT_ERRC_MASK		(0xf << BCH_BHINT_ERRC_SHIFT)
+#define BCH_BHINT_TERRC_SHIFT		16
+#define BCH_BHINT_TERRC_MASK		(0x7f << BCH_BHINT_TERRC_SHIFT)
+#define BCH_BHINT_ALL_0			BIT(5)
+#define BCH_BHINT_ALL_F			BIT(4)
+#define BCH_BHINT_DECF			BIT(3)
+#define BCH_BHINT_ENCF			BIT(2)
+#define BCH_BHINT_UNCOR			BIT(1)
+#define BCH_BHINT_ERR			BIT(0)
+
+/* Timeout for BCH calculation/correction. */
+#define BCH_TIMEOUT_US			100000
+
+static inline void jz4725b_bch_config_set(struct ingenic_ecc *bch, u32 cfg)
+{
+	writel(cfg, bch->base + BCH_BHCSR);
+}
+
+static inline void jz4725b_bch_config_clear(struct ingenic_ecc *bch, u32 cfg)
+{
+	writel(cfg, bch->base + BCH_BHCCR);
+}
+
+static int jz4725b_bch_reset(struct ingenic_ecc *bch,
+			     struct ingenic_ecc_params *params, bool calc_ecc)
+{
+	u32 reg, max_value;
+
+	/* Clear interrupt status. */
+	writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+	/* Initialise and enable BCH. */
+	jz4725b_bch_config_clear(bch, 0x1f);
+	jz4725b_bch_config_set(bch, BCH_BHCR_BCHE);
+
+	if (params->strength == 8)
+		jz4725b_bch_config_set(bch, BCH_BHCR_BSEL);
+	else
+		jz4725b_bch_config_clear(bch, BCH_BHCR_BSEL);
+
+	if (calc_ecc) /* calculate ECC from data */
+		jz4725b_bch_config_set(bch, BCH_BHCR_ENCE);
+	else /* correct data from ECC */
+		jz4725b_bch_config_clear(bch, BCH_BHCR_ENCE);
+
+	jz4725b_bch_config_set(bch, BCH_BHCR_INIT);
+
+	max_value = BCH_BHCNT_ENC_COUNT_MASK >> BCH_BHCNT_ENC_COUNT_SHIFT;
+	if (params->size > max_value)
+		return -EINVAL;
+
+	max_value = BCH_BHCNT_DEC_COUNT_MASK >> BCH_BHCNT_DEC_COUNT_SHIFT;
+	if (params->size + params->bytes > max_value)
+		return -EINVAL;
+
+	/* Set up BCH count register. */
+	reg = params->size << BCH_BHCNT_ENC_COUNT_SHIFT;
+	reg |= (params->size + params->bytes) << BCH_BHCNT_DEC_COUNT_SHIFT;
+	writel(reg, bch->base + BCH_BHCNT);
+
+	return 0;
+}
+
+static void jz4725b_bch_disable(struct ingenic_ecc *bch)
+{
+	/* Clear interrupts */
+	writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+	/* Disable the hardware */
+	jz4725b_bch_config_clear(bch, BCH_BHCR_BCHE);
+}
+
+static void jz4725b_bch_write_data(struct ingenic_ecc *bch, const u8 *buf,
+				   size_t size)
+{
+	while (size--)
+		writeb(*buf++, bch->base + BCH_BHDR);
+}
+
+static void jz4725b_bch_read_parity(struct ingenic_ecc *bch, u8 *buf,
+				    size_t size)
+{
+	size_t size32 = size / sizeof(u32);
+	size_t size8 = size % sizeof(u32);
+	u32 *dest32;
+	u8 *dest8;
+	u32 val, offset = 0;
+
+	dest32 = (u32 *)buf;
+	while (size32--) {
+		*dest32++ = readl_relaxed(bch->base + BCH_BHPAR0 + offset);
+		offset += sizeof(u32);
+	}
+
+	dest8 = (u8 *)dest32;
+	val = readl_relaxed(bch->base + BCH_BHPAR0 + offset);
+	switch (size8) {
+	case 3:
+		dest8[2] = (val >> 16) & 0xff;
+		fallthrough;
+	case 2:
+		dest8[1] = (val >> 8) & 0xff;
+		fallthrough;
+	case 1:
+		dest8[0] = val & 0xff;
+		break;
+	}
+}
+
+static int jz4725b_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq,
+				     u32 *status)
+{
+	u32 reg;
+	int ret;
+
+	/*
+	 * While we could use interrupts here and sleep until the operation
+	 * completes, the controller works fairly quickly (usually a few
+	 * microseconds) and so the overhead of sleeping until we get an
+	 * interrupt quite noticeably decreases performance.
+	 */
+	ret = readl_relaxed_poll_timeout(bch->base + BCH_BHINT, reg,
+					 reg & irq, 0, BCH_TIMEOUT_US);
+	if (ret)
+		return ret;
+
+	if (status)
+		*status = reg;
+
+	writel(reg, bch->base + BCH_BHINT);
+
+	return 0;
+}
+
+static int jz4725b_calculate(struct ingenic_ecc *bch,
+			     struct ingenic_ecc_params *params,
+			     const u8 *buf, u8 *ecc_code)
+{
+	int ret;
+
+	mutex_lock(&bch->lock);
+
+	ret = jz4725b_bch_reset(bch, params, true);
+	if (ret) {
+		dev_err(bch->dev, "Unable to init BCH with given parameters\n");
+		goto out_disable;
+	}
+
+	jz4725b_bch_write_data(bch, buf, params->size);
+
+	ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL);
+	if (ret) {
+		dev_err(bch->dev, "timed out while calculating ECC\n");
+		goto out_disable;
+	}
+
+	jz4725b_bch_read_parity(bch, ecc_code, params->bytes);
+
+out_disable:
+	jz4725b_bch_disable(bch);
+	mutex_unlock(&bch->lock);
+
+	return ret;
+}
+
+static int jz4725b_correct(struct ingenic_ecc *bch,
+			   struct ingenic_ecc_params *params,
+			   u8 *buf, u8 *ecc_code)
+{
+	u32 reg, errors, bit;
+	unsigned int i;
+	int ret;
+
+	mutex_lock(&bch->lock);
+
+	ret = jz4725b_bch_reset(bch, params, false);
+	if (ret) {
+		dev_err(bch->dev, "Unable to init BCH with given parameters\n");
+		goto out;
+	}
+
+	jz4725b_bch_write_data(bch, buf, params->size);
+	jz4725b_bch_write_data(bch, ecc_code, params->bytes);
+
+	ret = jz4725b_bch_wait_complete(bch, BCH_BHINT_DECF, &reg);
+	if (ret) {
+		dev_err(bch->dev, "timed out while correcting data\n");
+		goto out;
+	}
+
+	if (reg & (BCH_BHINT_ALL_F | BCH_BHINT_ALL_0)) {
+		/* Data and ECC is all 0xff or 0x00 - nothing to correct */
+		ret = 0;
+		goto out;
+	}
+
+	if (reg & BCH_BHINT_UNCOR) {
+		/* Uncorrectable ECC error */
+		ret = -EBADMSG;
+		goto out;
+	}
+
+	errors = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT;
+
+	/* Correct any detected errors. */
+	for (i = 0; i < errors; i++) {
+		if (i & 1) {
+			bit = (reg & BCH_BHERR_INDEX1_MASK) >> BCH_BHERR_INDEX1_SHIFT;
+		} else {
+			reg = readl(bch->base + BCH_BHERR0 + (i * 4));
+			bit = (reg & BCH_BHERR_INDEX0_MASK) >> BCH_BHERR_INDEX0_SHIFT;
+		}
+
+		buf[(bit >> 3)] ^= BIT(bit & 0x7);
+	}
+
+out:
+	jz4725b_bch_disable(bch);
+	mutex_unlock(&bch->lock);
+
+	return ret;
+}
+
+static const struct ingenic_ecc_ops jz4725b_bch_ops = {
+	.disable = jz4725b_bch_disable,
+	.calculate = jz4725b_calculate,
+	.correct = jz4725b_correct,
+};
+
+static const struct of_device_id jz4725b_bch_dt_match[] = {
+	{ .compatible = "ingenic,jz4725b-bch", .data = &jz4725b_bch_ops },
+	{},
+};
+MODULE_DEVICE_TABLE(of, jz4725b_bch_dt_match);
+
+static struct platform_driver jz4725b_bch_driver = {
+	.probe		= ingenic_ecc_probe,
+	.driver	= {
+		.name	= "jz4725b-bch",
+		.of_match_table = jz4725b_bch_dt_match,
+	},
+};
+module_platform_driver(jz4725b_bch_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ4725B BCH controller driver");
+MODULE_LICENSE("GPL v2");

linux-7.2.3/drivers/mtd/nand/raw/ingenic/jz4740_ecc.c

@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4740 ECC controller driver
+ *
+ * Copyright (c) 2019 Paul Cercueil <paul@crapouillou.net>
+ *
+ * based on jz4740-nand.c
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+#define JZ_REG_NAND_ECC_CTRL	0x00
+#define JZ_REG_NAND_DATA	0x04
+#define JZ_REG_NAND_PAR0	0x08
+#define JZ_REG_NAND_PAR1	0x0C
+#define JZ_REG_NAND_PAR2	0x10
+#define JZ_REG_NAND_IRQ_STAT	0x14
+#define JZ_REG_NAND_IRQ_CTRL	0x18
+#define JZ_REG_NAND_ERR(x)	(0x1C + ((x) << 2))
+
+#define JZ_NAND_ECC_CTRL_PAR_READY	BIT(4)
+#define JZ_NAND_ECC_CTRL_ENCODING	BIT(3)
+#define JZ_NAND_ECC_CTRL_RS		BIT(2)
+#define JZ_NAND_ECC_CTRL_RESET		BIT(1)
+#define JZ_NAND_ECC_CTRL_ENABLE		BIT(0)
+
+#define JZ_NAND_STATUS_ERR_COUNT	(BIT(31) | BIT(30) | BIT(29))
+#define JZ_NAND_STATUS_PAD_FINISH	BIT(4)
+#define JZ_NAND_STATUS_DEC_FINISH	BIT(3)
+#define JZ_NAND_STATUS_ENC_FINISH	BIT(2)
+#define JZ_NAND_STATUS_UNCOR_ERROR	BIT(1)
+#define JZ_NAND_STATUS_ERROR		BIT(0)
+
+static const uint8_t empty_block_ecc[] = {
+	0xcd, 0x9d, 0x90, 0x58, 0xf4, 0x8b, 0xff, 0xb7, 0x6f
+};
+
+static void jz4740_ecc_reset(struct ingenic_ecc *ecc, bool calc_ecc)
+{
+	uint32_t reg;
+
+	/* Clear interrupt status */
+	writel(0, ecc->base + JZ_REG_NAND_IRQ_STAT);
+
+	/* Initialize and enable ECC hardware */
+	reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+	reg |= JZ_NAND_ECC_CTRL_RESET;
+	reg |= JZ_NAND_ECC_CTRL_ENABLE;
+	reg |= JZ_NAND_ECC_CTRL_RS;
+	if (calc_ecc) /* calculate ECC from data */
+		reg |= JZ_NAND_ECC_CTRL_ENCODING;
+	else /* correct data from ECC */
+		reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
+
+	writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+}
+
+static int jz4740_ecc_calculate(struct ingenic_ecc *ecc,
+				struct ingenic_ecc_params *params,
+				const u8 *buf, u8 *ecc_code)
+{
+	uint32_t reg, status;
+	unsigned int timeout = 1000;
+	int i;
+
+	jz4740_ecc_reset(ecc, true);
+
+	do {
+		status = readl(ecc->base + JZ_REG_NAND_IRQ_STAT);
+	} while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout);
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+	reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+	writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+
+	for (i = 0; i < params->bytes; ++i)
+		ecc_code[i] = readb(ecc->base + JZ_REG_NAND_PAR0 + i);
+
+	/*
+	 * If the written data is completely 0xff, we also want to write 0xff as
+	 * ECC, otherwise we will get in trouble when doing subpage writes.
+	 */
+	if (memcmp(ecc_code, empty_block_ecc, sizeof(empty_block_ecc)) == 0)
+		memset(ecc_code, 0xff, sizeof(empty_block_ecc));
+
+	return 0;
+}
+
+static void jz_nand_correct_data(uint8_t *buf, int index, int mask)
+{
+	int offset = index & 0x7;
+	uint16_t data;
+
+	index += (index >> 3);
+
+	data = buf[index];
+	data |= buf[index + 1] << 8;
+
+	mask ^= (data >> offset) & 0x1ff;
+	data &= ~(0x1ff << offset);
+	data |= (mask << offset);
+
+	buf[index] = data & 0xff;
+	buf[index + 1] = (data >> 8) & 0xff;
+}
+
+static int jz4740_ecc_correct(struct ingenic_ecc *ecc,
+			      struct ingenic_ecc_params *params,
+			      u8 *buf, u8 *ecc_code)
+{
+	int i, error_count, index;
+	uint32_t reg, status, error;
+	unsigned int timeout = 1000;
+
+	jz4740_ecc_reset(ecc, false);
+
+	for (i = 0; i < params->bytes; ++i)
+		writeb(ecc_code[i], ecc->base + JZ_REG_NAND_PAR0 + i);
+
+	reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+	reg |= JZ_NAND_ECC_CTRL_PAR_READY;
+	writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+
+	do {
+		status = readl(ecc->base + JZ_REG_NAND_IRQ_STAT);
+	} while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout);
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+	reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+	writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+
+	if (status & JZ_NAND_STATUS_ERROR) {
+		if (status & JZ_NAND_STATUS_UNCOR_ERROR)
+			return -EBADMSG;
+
+		error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29;
+
+		for (i = 0; i < error_count; ++i) {
+			error = readl(ecc->base + JZ_REG_NAND_ERR(i));
+			index = ((error >> 16) & 0x1ff) - 1;
+			if (index >= 0 && index < params->size)
+				jz_nand_correct_data(buf, index, error & 0x1ff);
+		}
+
+		return error_count;
+	}
+
+	return 0;
+}
+
+static void jz4740_ecc_disable(struct ingenic_ecc *ecc)
+{
+	u32 reg;
+
+	writel(0, ecc->base + JZ_REG_NAND_IRQ_STAT);
+	reg = readl(ecc->base + JZ_REG_NAND_ECC_CTRL);
+	reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+	writel(reg, ecc->base + JZ_REG_NAND_ECC_CTRL);
+}
+
+static const struct ingenic_ecc_ops jz4740_ecc_ops = {
+	.disable = jz4740_ecc_disable,
+	.calculate = jz4740_ecc_calculate,
+	.correct = jz4740_ecc_correct,
+};
+
+static const struct of_device_id jz4740_ecc_dt_match[] = {
+	{ .compatible = "ingenic,jz4740-ecc", .data = &jz4740_ecc_ops },
+	{},
+};
+MODULE_DEVICE_TABLE(of, jz4740_ecc_dt_match);
+
+static struct platform_driver jz4740_ecc_driver = {
+	.probe		= ingenic_ecc_probe,
+	.driver	= {
+		.name	= "jz4740-ecc",
+		.of_match_table = jz4740_ecc_dt_match,
+	},
+};
+module_platform_driver(jz4740_ecc_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ4740 ECC controller driver");
+MODULE_LICENSE("GPL v2");

linux-7.2.3/drivers/mtd/nand/raw/ingenic/jz4780_bch.c

@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4780 BCH controller driver
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "ingenic_ecc.h"
+
+#define BCH_BHCR			0x0
+#define BCH_BHCCR			0x8
+#define BCH_BHCNT			0xc
+#define BCH_BHDR			0x10
+#define BCH_BHPAR0			0x14
+#define BCH_BHERR0			0x84
+#define BCH_BHINT			0x184
+#define BCH_BHINTES			0x188
+#define BCH_BHINTEC			0x18c
+#define BCH_BHINTE			0x190
+
+#define BCH_BHCR_BSEL_SHIFT		4
+#define BCH_BHCR_BSEL_MASK		(0x7f << BCH_BHCR_BSEL_SHIFT)
+#define BCH_BHCR_ENCE			BIT(2)
+#define BCH_BHCR_INIT			BIT(1)
+#define BCH_BHCR_BCHE			BIT(0)
+
+#define BCH_BHCNT_PARITYSIZE_SHIFT	16
+#define BCH_BHCNT_PARITYSIZE_MASK	(0x7f << BCH_BHCNT_PARITYSIZE_SHIFT)
+#define BCH_BHCNT_BLOCKSIZE_SHIFT	0
+#define BCH_BHCNT_BLOCKSIZE_MASK	(0x7ff << BCH_BHCNT_BLOCKSIZE_SHIFT)
+
+#define BCH_BHERR_MASK_SHIFT		16
+#define BCH_BHERR_MASK_MASK		(0xffff << BCH_BHERR_MASK_SHIFT)
+#define BCH_BHERR_INDEX_SHIFT		0
+#define BCH_BHERR_INDEX_MASK		(0x7ff << BCH_BHERR_INDEX_SHIFT)
+
+#define BCH_BHINT_ERRC_SHIFT		24
+#define BCH_BHINT_ERRC_MASK		(0x7f << BCH_BHINT_ERRC_SHIFT)
+#define BCH_BHINT_TERRC_SHIFT		16
+#define BCH_BHINT_TERRC_MASK		(0x7f << BCH_BHINT_TERRC_SHIFT)
+#define BCH_BHINT_DECF			BIT(3)
+#define BCH_BHINT_ENCF			BIT(2)
+#define BCH_BHINT_UNCOR			BIT(1)
+#define BCH_BHINT_ERR			BIT(0)
+
+#define BCH_CLK_RATE			(200 * 1000 * 1000)
+
+/* Timeout for BCH calculation/correction. */
+#define BCH_TIMEOUT_US			100000
+
+static void jz4780_bch_reset(struct ingenic_ecc *bch,
+			     struct ingenic_ecc_params *params, bool encode)
+{
+	u32 reg;
+
+	/* Clear interrupt status. */
+	writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+	/* Set up BCH count register. */
+	reg = params->size << BCH_BHCNT_BLOCKSIZE_SHIFT;
+	reg |= params->bytes << BCH_BHCNT_PARITYSIZE_SHIFT;
+	writel(reg, bch->base + BCH_BHCNT);
+
+	/* Initialise and enable BCH. */
+	reg = BCH_BHCR_BCHE | BCH_BHCR_INIT;
+	reg |= params->strength << BCH_BHCR_BSEL_SHIFT;
+	if (encode)
+		reg |= BCH_BHCR_ENCE;
+	writel(reg, bch->base + BCH_BHCR);
+}
+
+static void jz4780_bch_disable(struct ingenic_ecc *bch)
+{
+	writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+	writel(BCH_BHCR_BCHE, bch->base + BCH_BHCCR);
+}
+
+static void jz4780_bch_write_data(struct ingenic_ecc *bch, const void *buf,
+				  size_t size)
+{
+	size_t size32 = size / sizeof(u32);
+	size_t size8 = size % sizeof(u32);
+	const u32 *src32;
+	const u8 *src8;
+
+	src32 = (const u32 *)buf;
+	while (size32--)
+		writel(*src32++, bch->base + BCH_BHDR);
+
+	src8 = (const u8 *)src32;
+	while (size8--)
+		writeb(*src8++, bch->base + BCH_BHDR);
+}
+
+static void jz4780_bch_read_parity(struct ingenic_ecc *bch, void *buf,
+				   size_t size)
+{
+	size_t size32 = size / sizeof(u32);
+	size_t size8 = size % sizeof(u32);
+	u32 *dest32;
+	u8 *dest8;
+	u32 val, offset = 0;
+
+	dest32 = (u32 *)buf;
+	while (size32--) {
+		*dest32++ = readl(bch->base + BCH_BHPAR0 + offset);
+		offset += sizeof(u32);
+	}
+
+	dest8 = (u8 *)dest32;
+	val = readl(bch->base + BCH_BHPAR0 + offset);
+	switch (size8) {
+	case 3:
+		dest8[2] = (val >> 16) & 0xff;
+		fallthrough;
+	case 2:
+		dest8[1] = (val >> 8) & 0xff;
+		fallthrough;
+	case 1:
+		dest8[0] = val & 0xff;
+		break;
+	}
+}
+
+static bool jz4780_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq,
+				     u32 *status)
+{
+	u32 reg;
+	int ret;
+
+	/*
+	 * While we could use interrupts here and sleep until the operation
+	 * completes, the controller works fairly quickly (usually a few
+	 * microseconds) and so the overhead of sleeping until we get an
+	 * interrupt quite noticeably decreases performance.
+	 */
+	ret = readl_poll_timeout(bch->base + BCH_BHINT, reg,
+				 (reg & irq) == irq, 0, BCH_TIMEOUT_US);
+	if (ret)
+		return false;
+
+	if (status)
+		*status = reg;
+
+	writel(reg, bch->base + BCH_BHINT);
+	return true;
+}
+
+static int jz4780_calculate(struct ingenic_ecc *bch,
+			    struct ingenic_ecc_params *params,
+			    const u8 *buf, u8 *ecc_code)
+{
+	int ret = 0;
+
+	mutex_lock(&bch->lock);
+
+	jz4780_bch_reset(bch, params, true);
+	jz4780_bch_write_data(bch, buf, params->size);
+
+	if (jz4780_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL)) {
+		jz4780_bch_read_parity(bch, ecc_code, params->bytes);
+	} else {
+		dev_err(bch->dev, "timed out while calculating ECC\n");
+		ret = -ETIMEDOUT;
+	}
+
+	jz4780_bch_disable(bch);
+	mutex_unlock(&bch->lock);
+	return ret;
+}
+
+static int jz4780_correct(struct ingenic_ecc *bch,
+			  struct ingenic_ecc_params *params,
+			  u8 *buf, u8 *ecc_code)
+{
+	u32 reg, mask, index;
+	int i, ret, count;
+
+	mutex_lock(&bch->lock);
+
+	jz4780_bch_reset(bch, params, false);
+	jz4780_bch_write_data(bch, buf, params->size);
+	jz4780_bch_write_data(bch, ecc_code, params->bytes);
+
+	if (!jz4780_bch_wait_complete(bch, BCH_BHINT_DECF, &reg)) {
+		dev_err(bch->dev, "timed out while correcting data\n");
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	if (reg & BCH_BHINT_UNCOR) {
+		dev_warn(bch->dev, "uncorrectable ECC error\n");
+		ret = -EBADMSG;
+		goto out;
+	}
+
+	/* Correct any detected errors. */
+	if (reg & BCH_BHINT_ERR) {
+		count = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT;
+		ret = (reg & BCH_BHINT_TERRC_MASK) >> BCH_BHINT_TERRC_SHIFT;
+
+		for (i = 0; i < count; i++) {
+			reg = readl(bch->base + BCH_BHERR0 + (i * 4));
+			mask = (reg & BCH_BHERR_MASK_MASK) >>
+						BCH_BHERR_MASK_SHIFT;
+			index = (reg & BCH_BHERR_INDEX_MASK) >>
+						BCH_BHERR_INDEX_SHIFT;
+			buf[(index * 2) + 0] ^= mask;
+			buf[(index * 2) + 1] ^= mask >> 8;
+		}
+	} else {
+		ret = 0;
+	}
+
+out:
+	jz4780_bch_disable(bch);
+	mutex_unlock(&bch->lock);
+	return ret;
+}
+
+static int jz4780_bch_probe(struct platform_device *pdev)
+{
+	struct ingenic_ecc *bch;
+	int ret;
+
+	ret = ingenic_ecc_probe(pdev);
+	if (ret)
+		return ret;
+
+	bch = platform_get_drvdata(pdev);
+	clk_set_rate(bch->clk, BCH_CLK_RATE);
+
+	return 0;
+}
+
+static const struct ingenic_ecc_ops jz4780_bch_ops = {
+	.disable = jz4780_bch_disable,
+	.calculate = jz4780_calculate,
+	.correct = jz4780_correct,
+};
+
+static const struct of_device_id jz4780_bch_dt_match[] = {
+	{ .compatible = "ingenic,jz4780-bch", .data = &jz4780_bch_ops },
+	{},
+};
+MODULE_DEVICE_TABLE(of, jz4780_bch_dt_match);
+
+static struct platform_driver jz4780_bch_driver = {
+	.probe		= jz4780_bch_probe,
+	.driver	= {
+		.name	= "jz4780-bch",
+		.of_match_table = jz4780_bch_dt_match,
+	},
+};
+module_platform_driver(jz4780_bch_driver);
+
+MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
+MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
+MODULE_DESCRIPTION("Ingenic JZ4780 BCH error correction driver");
+MODULE_LICENSE("GPL v2");