Resguardo inicial

linux-7.2.3/drivers/net/can/c_can/Kconfig

@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig CAN_C_CAN
+	tristate "Bosch C_CAN/D_CAN devices"
+	depends on HAS_IOMEM
+
+if CAN_C_CAN
+
+config CAN_C_CAN_PLATFORM
+	tristate "Generic Platform Bus based C_CAN/D_CAN driver"
+	help
+	  This driver adds support for the C_CAN/D_CAN chips connected
+	  to the "platform bus" (Linux abstraction for directly to the
+	  processor attached devices) which can be found on various
+	  boards from ST Microelectronics (http://www.st.com) like the
+	  SPEAr1310 and SPEAr320 evaluation boards & TI (www.ti.com)
+	  boards like am335x, dm814x, dm813x and dm811x.
+
+config CAN_C_CAN_PCI
+	tristate "Generic PCI Bus based C_CAN/D_CAN driver"
+	depends on PCI
+	help
+	  This driver adds support for the C_CAN/D_CAN chips connected
+	  to the PCI bus. E.g. for the C_CAN controller IP inside the
+	  Intel Atom E6xx series IOH (aka EG20T 'PCH CAN').
+endif

linux-7.2.3/drivers/net/can/c_can/Makefile

@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+#  Makefile for the Bosch C_CAN controller drivers.
+#
+
+obj-$(CONFIG_CAN_C_CAN) += c_can.o
+
+c_can-objs :=
+c_can-objs += c_can_ethtool.o
+c_can-objs += c_can_main.o
+
+obj-$(CONFIG_CAN_C_CAN_PLATFORM) += c_can_platform.o
+obj-$(CONFIG_CAN_C_CAN_PCI) += c_can_pci.o

linux-7.2.3/drivers/net/can/c_can/c_can.h

@@ -0,0 +1,256 @@
+/*
+ * CAN bus driver for Bosch C_CAN controller
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Bhupesh Sharma <bhupesh.sharma@st.com>
+ *
+ * Borrowed heavily from the C_CAN driver originally written by:
+ * Copyright (C) 2007
+ * - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de>
+ * - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch>
+ *
+ * Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B.
+ * Bosch C_CAN user manual can be obtained from:
+ * http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/
+ * users_manual_c_can.pdf
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef C_CAN_H
+#define C_CAN_H
+
+enum reg {
+	C_CAN_CTRL_REG = 0,
+	C_CAN_CTRL_EX_REG,
+	C_CAN_STS_REG,
+	C_CAN_ERR_CNT_REG,
+	C_CAN_BTR_REG,
+	C_CAN_INT_REG,
+	C_CAN_TEST_REG,
+	C_CAN_BRPEXT_REG,
+	C_CAN_IF1_COMREQ_REG,
+	C_CAN_IF1_COMMSK_REG,
+	C_CAN_IF1_MASK1_REG,
+	C_CAN_IF1_MASK2_REG,
+	C_CAN_IF1_ARB1_REG,
+	C_CAN_IF1_ARB2_REG,
+	C_CAN_IF1_MSGCTRL_REG,
+	C_CAN_IF1_DATA1_REG,
+	C_CAN_IF1_DATA2_REG,
+	C_CAN_IF1_DATA3_REG,
+	C_CAN_IF1_DATA4_REG,
+	C_CAN_IF2_COMREQ_REG,
+	C_CAN_IF2_COMMSK_REG,
+	C_CAN_IF2_MASK1_REG,
+	C_CAN_IF2_MASK2_REG,
+	C_CAN_IF2_ARB1_REG,
+	C_CAN_IF2_ARB2_REG,
+	C_CAN_IF2_MSGCTRL_REG,
+	C_CAN_IF2_DATA1_REG,
+	C_CAN_IF2_DATA2_REG,
+	C_CAN_IF2_DATA3_REG,
+	C_CAN_IF2_DATA4_REG,
+	C_CAN_TXRQST1_REG,
+	C_CAN_TXRQST2_REG,
+	C_CAN_NEWDAT1_REG,
+	C_CAN_NEWDAT2_REG,
+	C_CAN_INTPND1_REG,
+	C_CAN_INTPND2_REG,
+	C_CAN_INTPND3_REG,
+	C_CAN_MSGVAL1_REG,
+	C_CAN_MSGVAL2_REG,
+	C_CAN_FUNCTION_REG,
+};
+
+static const u16 __maybe_unused reg_map_c_can[] = {
+	[C_CAN_CTRL_REG]	= 0x00,
+	[C_CAN_STS_REG]		= 0x02,
+	[C_CAN_ERR_CNT_REG]	= 0x04,
+	[C_CAN_BTR_REG]		= 0x06,
+	[C_CAN_INT_REG]		= 0x08,
+	[C_CAN_TEST_REG]	= 0x0A,
+	[C_CAN_BRPEXT_REG]	= 0x0C,
+	[C_CAN_IF1_COMREQ_REG]	= 0x10,
+	[C_CAN_IF1_COMMSK_REG]	= 0x12,
+	[C_CAN_IF1_MASK1_REG]	= 0x14,
+	[C_CAN_IF1_MASK2_REG]	= 0x16,
+	[C_CAN_IF1_ARB1_REG]	= 0x18,
+	[C_CAN_IF1_ARB2_REG]	= 0x1A,
+	[C_CAN_IF1_MSGCTRL_REG]	= 0x1C,
+	[C_CAN_IF1_DATA1_REG]	= 0x1E,
+	[C_CAN_IF1_DATA2_REG]	= 0x20,
+	[C_CAN_IF1_DATA3_REG]	= 0x22,
+	[C_CAN_IF1_DATA4_REG]	= 0x24,
+	[C_CAN_IF2_COMREQ_REG]	= 0x40,
+	[C_CAN_IF2_COMMSK_REG]	= 0x42,
+	[C_CAN_IF2_MASK1_REG]	= 0x44,
+	[C_CAN_IF2_MASK2_REG]	= 0x46,
+	[C_CAN_IF2_ARB1_REG]	= 0x48,
+	[C_CAN_IF2_ARB2_REG]	= 0x4A,
+	[C_CAN_IF2_MSGCTRL_REG]	= 0x4C,
+	[C_CAN_IF2_DATA1_REG]	= 0x4E,
+	[C_CAN_IF2_DATA2_REG]	= 0x50,
+	[C_CAN_IF2_DATA3_REG]	= 0x52,
+	[C_CAN_IF2_DATA4_REG]	= 0x54,
+	[C_CAN_TXRQST1_REG]	= 0x80,
+	[C_CAN_TXRQST2_REG]	= 0x82,
+	[C_CAN_NEWDAT1_REG]	= 0x90,
+	[C_CAN_NEWDAT2_REG]	= 0x92,
+	[C_CAN_INTPND1_REG]	= 0xA0,
+	[C_CAN_INTPND2_REG]	= 0xA2,
+	[C_CAN_MSGVAL1_REG]	= 0xB0,
+	[C_CAN_MSGVAL2_REG]	= 0xB2,
+};
+
+static const u16 __maybe_unused reg_map_d_can[] = {
+	[C_CAN_CTRL_REG]	= 0x00,
+	[C_CAN_CTRL_EX_REG]	= 0x02,
+	[C_CAN_STS_REG]		= 0x04,
+	[C_CAN_ERR_CNT_REG]	= 0x08,
+	[C_CAN_BTR_REG]		= 0x0C,
+	[C_CAN_BRPEXT_REG]	= 0x0E,
+	[C_CAN_INT_REG]		= 0x10,
+	[C_CAN_TEST_REG]	= 0x14,
+	[C_CAN_FUNCTION_REG]	= 0x18,
+	[C_CAN_TXRQST1_REG]	= 0x88,
+	[C_CAN_TXRQST2_REG]	= 0x8A,
+	[C_CAN_NEWDAT1_REG]	= 0x9C,
+	[C_CAN_NEWDAT2_REG]	= 0x9E,
+	[C_CAN_INTPND1_REG]	= 0xB0,
+	[C_CAN_INTPND2_REG]	= 0xB2,
+	[C_CAN_INTPND3_REG]	= 0xB4,
+	[C_CAN_MSGVAL1_REG]	= 0xC4,
+	[C_CAN_MSGVAL2_REG]	= 0xC6,
+	[C_CAN_IF1_COMREQ_REG]	= 0x100,
+	[C_CAN_IF1_COMMSK_REG]	= 0x102,
+	[C_CAN_IF1_MASK1_REG]	= 0x104,
+	[C_CAN_IF1_MASK2_REG]	= 0x106,
+	[C_CAN_IF1_ARB1_REG]	= 0x108,
+	[C_CAN_IF1_ARB2_REG]	= 0x10A,
+	[C_CAN_IF1_MSGCTRL_REG]	= 0x10C,
+	[C_CAN_IF1_DATA1_REG]	= 0x110,
+	[C_CAN_IF1_DATA2_REG]	= 0x112,
+	[C_CAN_IF1_DATA3_REG]	= 0x114,
+	[C_CAN_IF1_DATA4_REG]	= 0x116,
+	[C_CAN_IF2_COMREQ_REG]	= 0x120,
+	[C_CAN_IF2_COMMSK_REG]	= 0x122,
+	[C_CAN_IF2_MASK1_REG]	= 0x124,
+	[C_CAN_IF2_MASK2_REG]	= 0x126,
+	[C_CAN_IF2_ARB1_REG]	= 0x128,
+	[C_CAN_IF2_ARB2_REG]	= 0x12A,
+	[C_CAN_IF2_MSGCTRL_REG]	= 0x12C,
+	[C_CAN_IF2_DATA1_REG]	= 0x130,
+	[C_CAN_IF2_DATA2_REG]	= 0x132,
+	[C_CAN_IF2_DATA3_REG]	= 0x134,
+	[C_CAN_IF2_DATA4_REG]	= 0x136,
+};
+
+enum c_can_dev_id {
+	BOSCH_C_CAN,
+	BOSCH_D_CAN,
+};
+
+struct raminit_bits {
+	u8 start;
+	u8 done;
+};
+
+struct c_can_driver_data {
+	enum c_can_dev_id id;
+	unsigned int msg_obj_num;
+
+	/* RAMINIT register description. Optional. */
+	const struct raminit_bits *raminit_bits; /* Array of START/DONE bit positions */
+	u8 raminit_num;		/* Number of CAN instances on the SoC */
+	bool raminit_pulse;	/* If set, sets and clears START bit (pulse) */
+};
+
+/* Out of band RAMINIT register access via syscon regmap */
+struct c_can_raminit {
+	struct regmap *syscon;	/* for raminit ctrl. reg. access */
+	unsigned int reg;	/* register index within syscon */
+	struct raminit_bits bits;
+	bool needs_pulse;
+};
+
+/* c_can tx ring structure */
+struct c_can_tx_ring {
+	unsigned int head;
+	unsigned int tail;
+	unsigned int obj_num;
+};
+
+/* c_can private data structure */
+struct c_can_priv {
+	struct can_priv can;	/* must be the first member */
+	struct napi_struct napi;
+	struct net_device *dev;
+	struct device *device;
+	unsigned int msg_obj_num;
+	unsigned int msg_obj_rx_num;
+	unsigned int msg_obj_tx_num;
+	unsigned int msg_obj_rx_first;
+	unsigned int msg_obj_rx_last;
+	unsigned int msg_obj_tx_first;
+	unsigned int msg_obj_tx_last;
+	u32 msg_obj_rx_mask;
+	atomic_t sie_pending;
+	unsigned long tx_dir;
+	int last_status;
+	struct c_can_tx_ring tx;
+	u16 (*read_reg)(const struct c_can_priv *priv, enum reg index);
+	void (*write_reg)(const struct c_can_priv *priv, enum reg index, u16 val);
+	u32 (*read_reg32)(const struct c_can_priv *priv, enum reg index);
+	void (*write_reg32)(const struct c_can_priv *priv, enum reg index, u32 val);
+	void __iomem *base;
+	const u16 *regs;
+	enum c_can_dev_id type;
+	struct c_can_raminit raminit_sys;	/* RAMINIT via syscon regmap */
+	void (*raminit)(const struct c_can_priv *priv, bool enable);
+	u32 comm_rcv_high;
+};
+
+struct net_device *alloc_c_can_dev(int msg_obj_num);
+void free_c_can_dev(struct net_device *dev);
+int register_c_can_dev(struct net_device *dev);
+void unregister_c_can_dev(struct net_device *dev);
+
+#ifdef CONFIG_PM
+int c_can_power_up(struct net_device *dev);
+int c_can_power_down(struct net_device *dev);
+#endif
+
+extern const struct ethtool_ops c_can_ethtool_ops;
+
+static inline u8 c_can_get_tx_head(const struct c_can_tx_ring *ring)
+{
+	return ring->head & (ring->obj_num - 1);
+}
+
+static inline u8 c_can_get_tx_tail(const struct c_can_tx_ring *ring)
+{
+	return ring->tail & (ring->obj_num - 1);
+}
+
+static inline u8 c_can_get_tx_free(const struct c_can_priv *priv,
+				   const struct c_can_tx_ring *ring)
+{
+	u8 head = c_can_get_tx_head(ring);
+	u8 tail = c_can_get_tx_tail(ring);
+
+	if (priv->type == BOSCH_D_CAN)
+		return ring->obj_num - (ring->head - ring->tail);
+
+	/* This is not a FIFO. C/D_CAN sends out the buffers
+	 * prioritized. The lowest buffer number wins.
+	 */
+	if (head < tail)
+		return 0;
+
+	return ring->obj_num - head;
+}
+
+#endif /* C_CAN_H */

linux-7.2.3/drivers/net/can/c_can/c_can_ethtool.c

@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2021, Dario Binacchi <dariobin@libero.it>
+ */
+
+#include <linux/ethtool.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/can/dev.h>
+
+#include "c_can.h"
+
+static void c_can_get_ringparam(struct net_device *netdev,
+				struct ethtool_ringparam *ring,
+				struct kernel_ethtool_ringparam *kernel_ring,
+				struct netlink_ext_ack *extack)
+{
+	struct c_can_priv *priv = netdev_priv(netdev);
+
+	ring->rx_max_pending = priv->msg_obj_num;
+	ring->tx_max_pending = priv->msg_obj_num;
+	ring->rx_pending = priv->msg_obj_rx_num;
+	ring->tx_pending = priv->msg_obj_tx_num;
+}
+
+const struct ethtool_ops c_can_ethtool_ops = {
+	.get_ringparam = c_can_get_ringparam,
+	.get_ts_info = ethtool_op_get_ts_info,
+};

linux-7.2.3/drivers/net/can/c_can/c_can_pci.c

@@ -0,0 +1,295 @@
+/*
+ * PCI bus driver for Bosch C_CAN/D_CAN controller
+ *
+ * Copyright (C) 2012 Federico Vaga <federico.vaga@gmail.com>
+ *
+ * Borrowed from c_can_platform.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+
+#include <linux/can/dev.h>
+
+#include "c_can.h"
+
+#define PCI_DEVICE_ID_PCH_CAN	0x8818
+#define PCH_PCI_SOFT_RESET	0x01fc
+
+enum c_can_pci_reg_align {
+	C_CAN_REG_ALIGN_16,
+	C_CAN_REG_ALIGN_32,
+	C_CAN_REG_32,
+};
+
+struct c_can_pci_data {
+	/* Specify if is C_CAN or D_CAN */
+	enum c_can_dev_id type;
+	/* Number of message objects */
+	unsigned int msg_obj_num;
+	/* Set the register alignment in the memory */
+	enum c_can_pci_reg_align reg_align;
+	/* Set the frequency */
+	unsigned int freq;
+	/* PCI bar number */
+	int bar;
+	/* Callback for reset */
+	void (*init)(const struct c_can_priv *priv, bool enable);
+};
+
+/* 16-bit c_can registers can be arranged differently in the memory
+ * architecture of different implementations. For example: 16-bit
+ * registers can be aligned to a 16-bit boundary or 32-bit boundary etc.
+ * Handle the same by providing a common read/write interface.
+ */
+static u16 c_can_pci_read_reg_aligned_to_16bit(const struct c_can_priv *priv,
+					       enum reg index)
+{
+	return readw(priv->base + priv->regs[index]);
+}
+
+static void c_can_pci_write_reg_aligned_to_16bit(const struct c_can_priv *priv,
+						 enum reg index, u16 val)
+{
+	writew(val, priv->base + priv->regs[index]);
+}
+
+static u16 c_can_pci_read_reg_aligned_to_32bit(const struct c_can_priv *priv,
+					       enum reg index)
+{
+	return readw(priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_pci_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
+						 enum reg index, u16 val)
+{
+	writew(val, priv->base + 2 * priv->regs[index]);
+}
+
+static u16 c_can_pci_read_reg_32bit(const struct c_can_priv *priv,
+				    enum reg index)
+{
+	return (u16)ioread32(priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_pci_write_reg_32bit(const struct c_can_priv *priv,
+				      enum reg index, u16 val)
+{
+	iowrite32((u32)val, priv->base + 2 * priv->regs[index]);
+}
+
+static u32 c_can_pci_read_reg32(const struct c_can_priv *priv, enum reg index)
+{
+	u32 val;
+
+	val = priv->read_reg(priv, index);
+	val |= ((u32)priv->read_reg(priv, index + 1)) << 16;
+
+	return val;
+}
+
+static void c_can_pci_write_reg32(const struct c_can_priv *priv, enum reg index,
+				  u32 val)
+{
+	priv->write_reg(priv, index + 1, val >> 16);
+	priv->write_reg(priv, index, val);
+}
+
+static void c_can_pci_reset_pch(const struct c_can_priv *priv, bool enable)
+{
+	if (enable) {
+		u32 __iomem *addr = priv->base + PCH_PCI_SOFT_RESET;
+
+		/* write to sw reset register */
+		iowrite32(1, addr);
+		iowrite32(0, addr);
+	}
+}
+
+static int c_can_pci_probe(struct pci_dev *pdev,
+			   const struct pci_device_id *ent)
+{
+	struct c_can_pci_data *c_can_pci_data = (void *)ent->driver_data;
+	struct c_can_priv *priv;
+	struct net_device *dev;
+	void __iomem *addr;
+	int ret;
+
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "pci_enable_device FAILED\n");
+		goto out;
+	}
+
+	ret = pci_request_regions(pdev, KBUILD_MODNAME);
+	if (ret) {
+		dev_err(&pdev->dev, "pci_request_regions FAILED\n");
+		goto out_disable_device;
+	}
+
+	ret = pci_enable_msi(pdev);
+	if (!ret) {
+		dev_info(&pdev->dev, "MSI enabled\n");
+		pci_set_master(pdev);
+	}
+
+	addr = pci_iomap(pdev, c_can_pci_data->bar,
+			 pci_resource_len(pdev, c_can_pci_data->bar));
+	if (!addr) {
+		dev_err(&pdev->dev,
+			"device has no PCI memory resources, failing adapter\n");
+		ret = -ENOMEM;
+		goto out_release_regions;
+	}
+
+	/* allocate the c_can device */
+	dev = alloc_c_can_dev(c_can_pci_data->msg_obj_num);
+	if (!dev) {
+		ret = -ENOMEM;
+		goto out_iounmap;
+	}
+
+	priv = netdev_priv(dev);
+	pci_set_drvdata(pdev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	dev->irq = pdev->irq;
+	priv->base = addr;
+	priv->device = &pdev->dev;
+
+	if (!c_can_pci_data->freq) {
+		dev_err(&pdev->dev, "no clock frequency defined\n");
+		ret = -ENODEV;
+		goto out_free_c_can;
+	} else {
+		priv->can.clock.freq = c_can_pci_data->freq;
+	}
+
+	/* Configure CAN type */
+	switch (c_can_pci_data->type) {
+	case BOSCH_C_CAN:
+		priv->regs = reg_map_c_can;
+		break;
+	case BOSCH_D_CAN:
+		priv->regs = reg_map_d_can;
+		break;
+	default:
+		ret = -EINVAL;
+		goto out_free_c_can;
+	}
+
+	priv->type = c_can_pci_data->type;
+
+	/* Configure access to registers */
+	switch (c_can_pci_data->reg_align) {
+	case C_CAN_REG_ALIGN_32:
+		priv->read_reg = c_can_pci_read_reg_aligned_to_32bit;
+		priv->write_reg = c_can_pci_write_reg_aligned_to_32bit;
+		break;
+	case C_CAN_REG_ALIGN_16:
+		priv->read_reg = c_can_pci_read_reg_aligned_to_16bit;
+		priv->write_reg = c_can_pci_write_reg_aligned_to_16bit;
+		break;
+	case C_CAN_REG_32:
+		priv->read_reg = c_can_pci_read_reg_32bit;
+		priv->write_reg = c_can_pci_write_reg_32bit;
+		break;
+	default:
+		ret = -EINVAL;
+		goto out_free_c_can;
+	}
+	priv->read_reg32 = c_can_pci_read_reg32;
+	priv->write_reg32 = c_can_pci_write_reg32;
+
+	priv->raminit = c_can_pci_data->init;
+
+	ret = register_c_can_dev(dev);
+	if (ret) {
+		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
+			KBUILD_MODNAME, ret);
+		goto out_free_c_can;
+	}
+
+	dev_dbg(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n",
+		KBUILD_MODNAME, priv->regs, dev->irq);
+
+	return 0;
+
+out_free_c_can:
+	free_c_can_dev(dev);
+out_iounmap:
+	pci_iounmap(pdev, addr);
+out_release_regions:
+	pci_disable_msi(pdev);
+	pci_release_regions(pdev);
+out_disable_device:
+	pci_disable_device(pdev);
+out:
+	return ret;
+}
+
+static void c_can_pci_remove(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct c_can_priv *priv = netdev_priv(dev);
+	void __iomem *addr = priv->base;
+
+	unregister_c_can_dev(dev);
+
+	free_c_can_dev(dev);
+
+	pci_iounmap(pdev, addr);
+	pci_disable_msi(pdev);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static const struct c_can_pci_data c_can_sta2x11 = {
+	.type = BOSCH_C_CAN,
+	.msg_obj_num = 32,
+	.reg_align = C_CAN_REG_ALIGN_32,
+	.freq = 52000000, /* 52 Mhz */
+	.bar = 0,
+};
+
+static const struct c_can_pci_data c_can_pch = {
+	.type = BOSCH_C_CAN,
+	.msg_obj_num = 32,
+	.reg_align = C_CAN_REG_32,
+	.freq = 50000000, /* 50 MHz */
+	.init = c_can_pci_reset_pch,
+	.bar = 1,
+};
+
+#define C_CAN_ID(_vend, _dev, _driverdata) {		\
+	PCI_DEVICE(_vend, _dev),			\
+	.driver_data = (unsigned long)&(_driverdata),	\
+}
+
+static const struct pci_device_id c_can_pci_tbl[] = {
+	C_CAN_ID(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_CAN,
+		 c_can_sta2x11),
+	C_CAN_ID(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH_CAN,
+		 c_can_pch),
+	{},
+};
+
+static struct pci_driver c_can_pci_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = c_can_pci_tbl,
+	.probe = c_can_pci_probe,
+	.remove = c_can_pci_remove,
+};
+
+module_pci_driver(c_can_pci_driver);
+
+MODULE_AUTHOR("Federico Vaga <federico.vaga@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("PCI CAN bus driver for Bosch C_CAN/D_CAN controller");
+MODULE_DEVICE_TABLE(pci, c_can_pci_tbl);

linux-7.2.3/drivers/net/can/c_can/c_can_platform.c

@@ -0,0 +1,469 @@
+/*
+ * Platform CAN bus driver for Bosch C_CAN controller
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Bhupesh Sharma <bhupesh.sharma@st.com>
+ *
+ * Borrowed heavily from the C_CAN driver originally written by:
+ * Copyright (C) 2007
+ * - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de>
+ * - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch>
+ *
+ * Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B.
+ * Bosch C_CAN user manual can be obtained from:
+ * http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/
+ * users_manual_c_can.pdf
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <linux/can/dev.h>
+
+#include "c_can.h"
+
+#define DCAN_RAM_INIT_BIT BIT(3)
+
+static DEFINE_SPINLOCK(raminit_lock);
+
+/* 16-bit c_can registers can be arranged differently in the memory
+ * architecture of different implementations. For example: 16-bit
+ * registers can be aligned to a 16-bit boundary or 32-bit boundary etc.
+ * Handle the same by providing a common read/write interface.
+ */
+static u16 c_can_plat_read_reg_aligned_to_16bit(const struct c_can_priv *priv,
+						enum reg index)
+{
+	return readw(priv->base + priv->regs[index]);
+}
+
+static void c_can_plat_write_reg_aligned_to_16bit(const struct c_can_priv *priv,
+						  enum reg index, u16 val)
+{
+	writew(val, priv->base + priv->regs[index]);
+}
+
+static u16 c_can_plat_read_reg_aligned_to_32bit(const struct c_can_priv *priv,
+						enum reg index)
+{
+	return readw(priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_plat_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
+						  enum reg index, u16 val)
+{
+	writew(val, priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_hw_raminit_wait_syscon(const struct c_can_priv *priv,
+					 u32 mask, u32 val)
+{
+	const struct c_can_raminit *raminit = &priv->raminit_sys;
+	int timeout = 0;
+	u32 ctrl = 0;
+
+	/* We look only at the bits of our instance. */
+	val &= mask;
+	do {
+		udelay(1);
+		timeout++;
+
+		regmap_read(raminit->syscon, raminit->reg, &ctrl);
+		if (timeout == 1000) {
+			dev_err(&priv->dev->dev, "%s: time out\n", __func__);
+			break;
+		}
+	} while ((ctrl & mask) != val);
+}
+
+static void c_can_hw_raminit_syscon(const struct c_can_priv *priv, bool enable)
+{
+	const struct c_can_raminit *raminit = &priv->raminit_sys;
+	u32 ctrl = 0;
+	u32 mask;
+
+	spin_lock(&raminit_lock);
+
+	mask = 1 << raminit->bits.start | 1 << raminit->bits.done;
+	regmap_read(raminit->syscon, raminit->reg, &ctrl);
+
+	/* We clear the start bit first. The start bit is
+	 * looking at the 0 -> transition, but is not self clearing;
+	 * NOTE: DONE must be written with 1 to clear it.
+	 * We can't clear the DONE bit here using regmap_update_bits()
+	 * as it will bypass the write if initial condition is START:0 DONE:1
+	 * e.g. on DRA7 which needs START pulse.
+	 */
+	ctrl &= ~mask;	/* START = 0, DONE = 0 */
+	regmap_update_bits(raminit->syscon, raminit->reg, mask, ctrl);
+
+	/* check if START bit is 0. Ignore DONE bit for now
+	 * as it can be either 0 or 1.
+	 */
+	c_can_hw_raminit_wait_syscon(priv, 1 << raminit->bits.start, ctrl);
+
+	if (enable) {
+		/* Clear DONE bit & set START bit. */
+		ctrl |= 1 << raminit->bits.start;
+		/* DONE must be written with 1 to clear it */
+		ctrl |= 1 << raminit->bits.done;
+		regmap_update_bits(raminit->syscon, raminit->reg, mask, ctrl);
+		/* prevent further clearing of DONE bit */
+		ctrl &= ~(1 << raminit->bits.done);
+		/* clear START bit if start pulse is needed */
+		if (raminit->needs_pulse) {
+			ctrl &= ~(1 << raminit->bits.start);
+			regmap_update_bits(raminit->syscon, raminit->reg,
+					   mask, ctrl);
+		}
+
+		ctrl |= 1 << raminit->bits.done;
+		c_can_hw_raminit_wait_syscon(priv, mask, ctrl);
+	}
+	spin_unlock(&raminit_lock);
+}
+
+static u32 c_can_plat_read_reg32(const struct c_can_priv *priv, enum reg index)
+{
+	u32 val;
+
+	val = priv->read_reg(priv, index);
+	val |= ((u32)priv->read_reg(priv, index + 1)) << 16;
+
+	return val;
+}
+
+static void c_can_plat_write_reg32(const struct c_can_priv *priv,
+				   enum reg index, u32 val)
+{
+	priv->write_reg(priv, index + 1, val >> 16);
+	priv->write_reg(priv, index, val);
+}
+
+static u32 d_can_plat_read_reg32(const struct c_can_priv *priv, enum reg index)
+{
+	return readl(priv->base + priv->regs[index]);
+}
+
+static void d_can_plat_write_reg32(const struct c_can_priv *priv,
+				   enum reg index, u32 val)
+{
+	writel(val, priv->base + priv->regs[index]);
+}
+
+static void c_can_hw_raminit_wait(const struct c_can_priv *priv, u32 mask)
+{
+	while (priv->read_reg32(priv, C_CAN_FUNCTION_REG) & mask)
+		udelay(1);
+}
+
+static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
+{
+	u32 ctrl;
+
+	ctrl = priv->read_reg32(priv, C_CAN_FUNCTION_REG);
+	ctrl &= ~DCAN_RAM_INIT_BIT;
+	priv->write_reg32(priv, C_CAN_FUNCTION_REG, ctrl);
+	c_can_hw_raminit_wait(priv, ctrl);
+
+	if (enable) {
+		ctrl |= DCAN_RAM_INIT_BIT;
+		priv->write_reg32(priv, C_CAN_FUNCTION_REG, ctrl);
+		c_can_hw_raminit_wait(priv, ctrl);
+	}
+}
+
+static const struct c_can_driver_data c_can_drvdata = {
+	.id = BOSCH_C_CAN,
+	.msg_obj_num = 32,
+};
+
+static const struct c_can_driver_data d_can_drvdata = {
+	.id = BOSCH_D_CAN,
+	.msg_obj_num = 32,
+};
+
+static const struct raminit_bits dra7_raminit_bits[] = {
+	[0] = { .start = 3, .done = 1, },
+	[1] = { .start = 5, .done = 2, },
+};
+
+static const struct c_can_driver_data dra7_dcan_drvdata = {
+	.id = BOSCH_D_CAN,
+	.msg_obj_num = 64,
+	.raminit_num = ARRAY_SIZE(dra7_raminit_bits),
+	.raminit_bits = dra7_raminit_bits,
+	.raminit_pulse = true,
+};
+
+static const struct raminit_bits am3352_raminit_bits[] = {
+	[0] = { .start = 0, .done = 8, },
+	[1] = { .start = 1, .done = 9, },
+};
+
+static const struct c_can_driver_data am3352_dcan_drvdata = {
+	.id = BOSCH_D_CAN,
+	.msg_obj_num = 64,
+	.raminit_num = ARRAY_SIZE(am3352_raminit_bits),
+	.raminit_bits = am3352_raminit_bits,
+};
+
+static const struct platform_device_id c_can_id_table[] = {
+	{
+		.name = KBUILD_MODNAME,
+		.driver_data = (kernel_ulong_t)&c_can_drvdata,
+	},
+	{
+		.name = "c_can",
+		.driver_data = (kernel_ulong_t)&c_can_drvdata,
+	},
+	{
+		.name = "d_can",
+		.driver_data = (kernel_ulong_t)&d_can_drvdata,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, c_can_id_table);
+
+static const struct of_device_id c_can_of_table[] = {
+	{ .compatible = "bosch,c_can", .data = &c_can_drvdata },
+	{ .compatible = "bosch,d_can", .data = &d_can_drvdata },
+	{ .compatible = "ti,dra7-d_can", .data = &dra7_dcan_drvdata },
+	{ .compatible = "ti,am3352-d_can", .data = &am3352_dcan_drvdata },
+	{ .compatible = "ti,am4372-d_can", .data = &am3352_dcan_drvdata },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, c_can_of_table);
+
+static int c_can_plat_probe(struct platform_device *pdev)
+{
+	int ret;
+	void __iomem *addr;
+	struct net_device *dev;
+	struct c_can_priv *priv;
+	struct resource *mem;
+	int irq;
+	struct clk *clk;
+	const struct c_can_driver_data *drvdata;
+	struct device_node *np = pdev->dev.of_node;
+
+	drvdata = device_get_match_data(&pdev->dev);
+
+	/* get the appropriate clk */
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	/* get the platform data */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	addr = devm_platform_get_and_ioremap_resource(pdev, 0, &mem);
+	if (IS_ERR(addr))
+		return PTR_ERR(addr);
+
+	/* allocate the c_can device */
+	dev = alloc_c_can_dev(drvdata->msg_obj_num);
+	if (!dev)
+		return -ENOMEM;
+
+	priv = netdev_priv(dev);
+	switch (drvdata->id) {
+	case BOSCH_C_CAN:
+		priv->regs = reg_map_c_can;
+		switch (mem->flags & IORESOURCE_MEM_TYPE_MASK) {
+		case IORESOURCE_MEM_32BIT:
+			priv->read_reg = c_can_plat_read_reg_aligned_to_32bit;
+			priv->write_reg = c_can_plat_write_reg_aligned_to_32bit;
+			priv->read_reg32 = c_can_plat_read_reg32;
+			priv->write_reg32 = c_can_plat_write_reg32;
+			break;
+		case IORESOURCE_MEM_16BIT:
+		default:
+			priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
+			priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
+			priv->read_reg32 = c_can_plat_read_reg32;
+			priv->write_reg32 = c_can_plat_write_reg32;
+			break;
+		}
+		break;
+	case BOSCH_D_CAN:
+		priv->regs = reg_map_d_can;
+		priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
+		priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
+		priv->read_reg32 = d_can_plat_read_reg32;
+		priv->write_reg32 = d_can_plat_write_reg32;
+
+		/* Check if we need custom RAMINIT via syscon. Mostly for TI
+		 * platforms. Only supported with DT boot.
+		 */
+		if (np && of_property_present(np, "syscon-raminit")) {
+			unsigned int args[2];
+			u32 id;
+			struct c_can_raminit *raminit = &priv->raminit_sys;
+
+			ret = -EINVAL;
+			raminit->syscon = syscon_regmap_lookup_by_phandle_args(np,
+									       "syscon-raminit",
+									       2, args);
+			if (IS_ERR(raminit->syscon)) {
+				ret = PTR_ERR(raminit->syscon);
+				goto exit_free_device;
+			}
+
+			raminit->reg = args[0];
+			id = args[1];
+
+			if (id >= drvdata->raminit_num) {
+				dev_err(&pdev->dev,
+					"Invalid CAN instance ID\n");
+				goto exit_free_device;
+			}
+
+			raminit->bits = drvdata->raminit_bits[id];
+			raminit->needs_pulse = drvdata->raminit_pulse;
+
+			priv->raminit = c_can_hw_raminit_syscon;
+		} else {
+			priv->raminit = c_can_hw_raminit;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+		goto exit_free_device;
+	}
+
+	dev->irq = irq;
+	priv->base = addr;
+	priv->device = &pdev->dev;
+	priv->can.clock.freq = clk_get_rate(clk);
+	priv->type = drvdata->id;
+
+	platform_set_drvdata(pdev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	pm_runtime_enable(priv->device);
+	ret = register_c_can_dev(dev);
+	if (ret) {
+		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
+			KBUILD_MODNAME, ret);
+		goto exit_pm_runtime;
+	}
+
+	dev_info(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n",
+		 KBUILD_MODNAME, priv->base, dev->irq);
+	return 0;
+
+exit_pm_runtime:
+	pm_runtime_disable(priv->device);
+exit_free_device:
+	free_c_can_dev(dev);
+
+	return ret;
+}
+
+static void c_can_plat_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct c_can_priv *priv = netdev_priv(dev);
+
+	unregister_c_can_dev(dev);
+	pm_runtime_disable(priv->device);
+	free_c_can_dev(dev);
+}
+
+#ifdef CONFIG_PM
+static int c_can_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	int ret;
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct c_can_priv *priv = netdev_priv(ndev);
+
+	if (priv->type != BOSCH_D_CAN) {
+		dev_warn(&pdev->dev, "Not supported\n");
+		return 0;
+	}
+
+	if (netif_running(ndev)) {
+		netif_stop_queue(ndev);
+		netif_device_detach(ndev);
+	}
+
+	ret = c_can_power_down(ndev);
+	if (ret) {
+		netdev_err(ndev, "failed to enter power down mode\n");
+		return ret;
+	}
+
+	priv->can.state = CAN_STATE_SLEEPING;
+
+	return 0;
+}
+
+static int c_can_resume(struct platform_device *pdev)
+{
+	int ret;
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct c_can_priv *priv = netdev_priv(ndev);
+
+	if (priv->type != BOSCH_D_CAN) {
+		dev_warn(&pdev->dev, "Not supported\n");
+		return 0;
+	}
+
+	ret = c_can_power_up(ndev);
+	if (ret) {
+		netdev_err(ndev, "Still in power down mode\n");
+		return ret;
+	}
+
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	if (netif_running(ndev)) {
+		netif_device_attach(ndev);
+		netif_start_queue(ndev);
+	}
+
+	return 0;
+}
+#else
+#define c_can_suspend NULL
+#define c_can_resume NULL
+#endif
+
+static struct platform_driver c_can_plat_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = c_can_of_table,
+	},
+	.probe = c_can_plat_probe,
+	.remove = c_can_plat_remove,
+	.suspend = c_can_suspend,
+	.resume = c_can_resume,
+	.id_table = c_can_id_table,
+};
+
+module_platform_driver(c_can_plat_driver);
+
+MODULE_AUTHOR("Bhupesh Sharma <bhupesh.sharma@st.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Platform CAN bus driver for Bosch C_CAN controller");