Resguardo inicial

linux-7.2.3/drivers/net/can/usb/Kconfig

@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "CAN USB interfaces"
+	depends on USB
+
+config CAN_8DEV_USB
+	tristate "8 devices USB2CAN interface"
+	help
+	  This driver supports the USB2CAN interface
+	  from 8 devices (http://www.8devices.com).
+
+config CAN_EMS_USB
+	tristate "EMS CPC-USB/ARM7 CAN/USB interface"
+	help
+	  This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
+	  from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
+config CAN_ESD_USB
+	tristate "esd electronics gmbh CAN/USB interfaces"
+	help
+	  This driver adds support for several CAN/USB interfaces
+	  from esd electronics gmbh (https://www.esd.eu).
+
+	  The drivers supports the following devices:
+	    - esd CAN-USB/2
+	    - esd CAN-USB/3-FD
+	    - esd CAN-USB/Micro
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called esd_usb.
+
+config CAN_ETAS_ES58X
+	tristate "ETAS ES58X CAN/USB interfaces"
+	select CRC16
+	select NET_DEVLINK
+	help
+	  This driver supports the ES581.4, ES582.1 and ES584.1 interfaces
+	  from ETAS GmbH (https://www.etas.com/en/products/es58x.php).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called etas_es58x.
+
+config CAN_F81604
+        tristate "Fintek F81604 USB to 2CAN interface"
+        help
+          This driver supports the Fintek F81604 USB to 2CAN interface.
+          The device can support CAN2.0A/B protocol and also support
+          2 output pins to control external terminator (optional).
+
+          To compile this driver as a module, choose M here: the module will
+          be called f81604.
+
+          (see also https://www.fintek.com.tw).
+
+config CAN_GS_USB
+	tristate "Geschwister Schneider UG and candleLight compatible interfaces"
+	select CAN_RX_OFFLOAD
+	help
+	  This driver supports the Geschwister Schneider and
+	  bytewerk.org candleLight compatible
+	  (https://github.com/candle-usb/candleLight_fw) USB/CAN
+	  interfaces.
+
+	  If unsure choose N,
+	  choose Y for built in support,
+	  M to compile as module (module will be named: gs_usb).
+
+config CAN_KVASER_USB
+	tristate "Kvaser CAN/USB interface"
+	select NET_DEVLINK
+	help
+	  This driver adds support for Kvaser CAN/USB devices like Kvaser
+	  Leaf Light, Kvaser USBcan II and Kvaser Memorator Pro 5xHS.
+
+	  The driver provides support for the following devices:
+	    - Kvaser Leaf Light
+	    - Kvaser Leaf Professional HS
+	    - Kvaser Leaf SemiPro HS
+	    - Kvaser Leaf Professional LS
+	    - Kvaser Leaf Professional SWC
+	    - Kvaser Leaf Professional LIN
+	    - Kvaser Leaf SemiPro LS
+	    - Kvaser Leaf SemiPro SWC
+	    - Kvaser Memorator II HS/HS
+	    - Kvaser USBcan Professional HS/HS
+	    - Kvaser Leaf Light GI
+	    - Kvaser Leaf Professional HS (OBD-II connector)
+	    - Kvaser Memorator Professional HS/LS
+	    - Kvaser Leaf Light "China"
+	    - Kvaser BlackBird SemiPro
+	    - Kvaser USBcan R
+	    - Kvaser USBcan R v2
+	    - Kvaser Leaf Light v2
+	    - Kvaser Leaf Light R v2
+	    - Kvaser Mini PCI Express HS
+	    - Kvaser Mini PCI Express 2xHS
+	    - Kvaser Mini PCIe 1xCAN
+	    - Kvaser USBcan Light 2xHS
+	    - Kvaser USBcan II HS/HS
+	    - Kvaser USBcan II HS/LS
+	    - Kvaser USBcan Rugged ("USBcan Rev B")
+	    - Kvaser Memorator HS/HS
+	    - Kvaser Memorator HS/LS
+	    - Scania VCI2 (if you have the Kvaser logo on top)
+	    - Kvaser BlackBird v2
+	    - Kvaser Leaf Pro HS v2
+	    - Kvaser Leaf v3
+	    - Kvaser Hybrid CAN/LIN
+	    - Kvaser Hybrid 2xCAN/LIN
+	    - Kvaser Hybrid Pro CAN/LIN
+	    - Kvaser Hybrid Pro 2xCAN/LIN
+	    - Kvaser Memorator 2xHS v2
+	    - Kvaser Memorator Pro 2xHS v2
+	    - Kvaser Memorator Pro 5xHS
+	    - Kvaser USBcan Light 4xHS
+	    - Kvaser USBcan Pro 2xHS v2
+	    - Kvaser USBcan Pro 4xHS
+	    - Kvaser USBcan Pro 5xCAN
+	    - Kvaser USBcan Pro 5xHS
+	    - Kvaser U100
+	    - Kvaser U100P
+	    - Kvaser U100S
+	    - ATI Memorator Pro 2xHS v2
+	    - ATI USBcan Pro 2xHS v2
+	    - Vining 800
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kvaser_usb.
+
+config CAN_MCBA_USB
+	tristate "Microchip CAN BUS Analyzer interface"
+	help
+	  This driver supports the CAN BUS Analyzer interface
+	  from Microchip (http://www.microchip.com/development-tools/).
+
+config CAN_NCT6694
+	tristate "Nuvoton NCT6694 Socket CANfd support"
+	depends on MFD_NCT6694
+	select CAN_RX_OFFLOAD
+	help
+	  If you say yes to this option, support will be included for Nuvoton
+	  NCT6694, a USB device to socket CANfd controller.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called nct6694_canfd.
+
+config CAN_PEAK_USB
+	tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD"
+	help
+	  This driver supports the PEAK-System Technik USB adapters that enable
+	  access to the CAN bus, with respect to the CAN 2.0b and/or CAN-FD
+	  standards, that is:
+
+	  PCAN-USB             single CAN 2.0b channel USB adapter
+	  PCAN-USB Pro         dual CAN 2.0b channels USB adapter
+	  PCAN-USB FD          single CAN-FD channel USB adapter
+	  PCAN-USB Pro FD      dual CAN-FD channels USB adapter
+	  PCAN-Chip USB        CAN-FD to USB stamp module
+	  PCAN-USB X6          6 CAN-FD channels USB adapter
+
+	  (see also http://www.peak-system.com).
+
+config CAN_UCAN
+	tristate "Theobroma Systems UCAN interface"
+	help
+	  This driver supports the Theobroma Systems
+	  UCAN USB-CAN interface.
+
+	  The UCAN driver supports the microcontroller-based USB/CAN
+	  adapters from Theobroma Systems. There are two form-factors
+	  that run essentially the same firmware:
+
+	  * Seal: standalone USB stick
+	          https://www.theobroma-systems.com/seal)
+	  * Mule: integrated on the PCB of various System-on-Modules
+	          from Theobroma Systems like the A31-µQ7 and the RK3399-Q7
+	          (https://www.theobroma-systems.com/rk3399-q7)
+
+endmenu

linux-7.2.3/drivers/net/can/usb/Makefile

@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+#  Makefile for the Linux Controller Area Network USB drivers.
+#
+
+obj-$(CONFIG_CAN_8DEV_USB) += usb_8dev.o
+obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
+obj-$(CONFIG_CAN_ESD_USB) += esd_usb.o
+obj-$(CONFIG_CAN_ETAS_ES58X) += etas_es58x/
+obj-$(CONFIG_CAN_F81604) += f81604.o
+obj-$(CONFIG_CAN_GS_USB) += gs_usb.o
+obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb/
+obj-$(CONFIG_CAN_MCBA_USB) += mcba_usb.o
+obj-$(CONFIG_CAN_NCT6694) += nct6694_canfd.o
+obj-$(CONFIG_CAN_PEAK_USB) += peak_usb/
+obj-$(CONFIG_CAN_UCAN) += ucan.o

linux-7.2.3/drivers/net/can/usb/etas_es58x/Makefile

@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_CAN_ETAS_ES58X) += etas_es58x.o
+etas_es58x-y = es58x_core.o es58x_devlink.o es581_4.o es58x_fd.o

linux-7.2.3/drivers/net/can/usb/etas_es58x/es581_4.c

@@ -0,0 +1,507 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* Driver for ETAS GmbH ES58X USB CAN(-FD) Bus Interfaces.
+ *
+ * File es581_4.c: Adds support to ETAS ES581.4.
+ *
+ * Copyright (c) 2019 Robert Bosch Engineering and Business Solutions. All rights reserved.
+ * Copyright (c) 2020 ETAS K.K.. All rights reserved.
+ * Copyright (c) 2020-2022 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
+ */
+
+#include <linux/unaligned.h>
+#include <linux/kernel.h>
+#include <linux/units.h>
+
+#include "es58x_core.h"
+#include "es581_4.h"
+
+/**
+ * es581_4_sizeof_rx_tx_msg() - Calculate the actual length of the
+ *	structure of a rx or tx message.
+ * @msg: message of variable length, must have a dlc field.
+ *
+ * Even if RTR frames have actually no payload, the ES58X devices
+ * still expect it. Must be a macro in order to accept several types
+ * (struct es581_4_tx_can_msg and struct es581_4_rx_can_msg) as an
+ * input.
+ *
+ * Return: length of the message.
+ */
+#define es581_4_sizeof_rx_tx_msg(msg)				\
+	offsetof(typeof(msg), data[can_cc_dlc2len((msg).dlc)])
+
+static u16 es581_4_get_msg_len(const union es58x_urb_cmd *urb_cmd)
+{
+	return get_unaligned_le16(&urb_cmd->es581_4_urb_cmd.msg_len);
+}
+
+static int es581_4_echo_msg(struct es58x_device *es58x_dev,
+			    const struct es581_4_urb_cmd *es581_4_urb_cmd)
+{
+	struct net_device *netdev;
+	const struct es581_4_bulk_echo_msg *bulk_echo_msg;
+	const struct es581_4_echo_msg *echo_msg;
+	u64 *tstamps = es58x_dev->timestamps;
+	u16 msg_len;
+	u32 first_packet_idx, packet_idx;
+	unsigned int dropped = 0;
+	int i, num_element, ret;
+
+	bulk_echo_msg = &es581_4_urb_cmd->bulk_echo_msg;
+	msg_len = get_unaligned_le16(&es581_4_urb_cmd->msg_len) -
+	    sizeof(bulk_echo_msg->channel_no);
+	num_element = es58x_msg_num_element(es58x_dev->dev,
+					    bulk_echo_msg->echo_msg, msg_len);
+	if (num_element <= 0)
+		return num_element;
+
+	ret = es58x_get_netdev(es58x_dev, bulk_echo_msg->channel_no,
+			       ES581_4_CHANNEL_IDX_OFFSET, &netdev);
+	if (ret)
+		return ret;
+
+	echo_msg = &bulk_echo_msg->echo_msg[0];
+	first_packet_idx = get_unaligned_le32(&echo_msg->packet_idx);
+	packet_idx = first_packet_idx;
+	for (i = 0; i < num_element; i++) {
+		u32 tmp_idx;
+
+		echo_msg = &bulk_echo_msg->echo_msg[i];
+		tmp_idx = get_unaligned_le32(&echo_msg->packet_idx);
+		if (tmp_idx == packet_idx - 1) {
+			if (net_ratelimit())
+				netdev_warn(netdev,
+					    "Received echo packet idx %u twice\n",
+					    packet_idx - 1);
+			dropped++;
+			continue;
+		}
+		if (tmp_idx != packet_idx) {
+			netdev_err(netdev, "Echo packet idx jumped from %u to %u\n",
+				   packet_idx - 1, echo_msg->packet_idx);
+			return -EBADMSG;
+		}
+
+		tstamps[i] = get_unaligned_le64(&echo_msg->timestamp);
+		packet_idx++;
+	}
+
+	netdev->stats.tx_dropped += dropped;
+	return es58x_can_get_echo_skb(netdev, first_packet_idx,
+				      tstamps, num_element - dropped);
+}
+
+static int es581_4_rx_can_msg(struct es58x_device *es58x_dev,
+			      const struct es581_4_urb_cmd *es581_4_urb_cmd,
+			      u16 msg_len)
+{
+	const struct device *dev = es58x_dev->dev;
+	struct net_device *netdev;
+	int pkts, num_element, channel_no, ret;
+
+	num_element = es58x_msg_num_element(dev, es581_4_urb_cmd->rx_can_msg,
+					    msg_len);
+	if (num_element <= 0)
+		return num_element;
+
+	channel_no = es581_4_urb_cmd->rx_can_msg[0].channel_no;
+	ret = es58x_get_netdev(es58x_dev, channel_no,
+			       ES581_4_CHANNEL_IDX_OFFSET, &netdev);
+	if (ret)
+		return ret;
+
+	if (!netif_running(netdev)) {
+		if (net_ratelimit())
+			netdev_info(netdev,
+				    "%s: %s is down, dropping %d rx packets\n",
+				    __func__, netdev->name, num_element);
+		netdev->stats.rx_dropped += num_element;
+		return 0;
+	}
+
+	for (pkts = 0; pkts < num_element; pkts++) {
+		const struct es581_4_rx_can_msg *rx_can_msg =
+		    &es581_4_urb_cmd->rx_can_msg[pkts];
+		u64 tstamp = get_unaligned_le64(&rx_can_msg->timestamp);
+		canid_t can_id = get_unaligned_le32(&rx_can_msg->can_id);
+
+		if (channel_no != rx_can_msg->channel_no)
+			return -EBADMSG;
+
+		ret = es58x_rx_can_msg(netdev, tstamp, rx_can_msg->data,
+				       can_id, rx_can_msg->flags,
+				       rx_can_msg->dlc);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+static int es581_4_rx_err_msg(struct es58x_device *es58x_dev,
+			      const struct es581_4_rx_err_msg *rx_err_msg)
+{
+	struct net_device *netdev;
+	enum es58x_err error = get_unaligned_le32(&rx_err_msg->error);
+	int ret;
+
+	ret = es58x_get_netdev(es58x_dev, rx_err_msg->channel_no,
+			       ES581_4_CHANNEL_IDX_OFFSET, &netdev);
+	if (ret)
+		return ret;
+
+	return es58x_rx_err_msg(netdev, error, 0,
+				get_unaligned_le64(&rx_err_msg->timestamp));
+}
+
+static int es581_4_rx_event_msg(struct es58x_device *es58x_dev,
+				const struct es581_4_rx_event_msg *rx_event_msg)
+{
+	struct net_device *netdev;
+	enum es58x_event event = get_unaligned_le32(&rx_event_msg->event);
+	int ret;
+
+	ret = es58x_get_netdev(es58x_dev, rx_event_msg->channel_no,
+			       ES581_4_CHANNEL_IDX_OFFSET, &netdev);
+	if (ret)
+		return ret;
+
+	return es58x_rx_err_msg(netdev, 0, event,
+				get_unaligned_le64(&rx_event_msg->timestamp));
+}
+
+static int es581_4_rx_cmd_ret_u32(struct es58x_device *es58x_dev,
+				  const struct es581_4_urb_cmd *es581_4_urb_cmd,
+				  enum es58x_ret_type ret_type)
+{
+	struct net_device *netdev;
+	const struct es581_4_rx_cmd_ret *rx_cmd_ret;
+	u16 msg_len = get_unaligned_le16(&es581_4_urb_cmd->msg_len);
+	int ret;
+
+	ret = es58x_check_msg_len(es58x_dev->dev,
+				  es581_4_urb_cmd->rx_cmd_ret, msg_len);
+	if (ret)
+		return ret;
+
+	rx_cmd_ret = &es581_4_urb_cmd->rx_cmd_ret;
+
+	ret = es58x_get_netdev(es58x_dev, rx_cmd_ret->channel_no,
+			       ES581_4_CHANNEL_IDX_OFFSET, &netdev);
+	if (ret)
+		return ret;
+
+	return es58x_rx_cmd_ret_u32(netdev, ret_type,
+				    get_unaligned_le32(&rx_cmd_ret->rx_cmd_ret_le32));
+}
+
+static int es581_4_tx_ack_msg(struct es58x_device *es58x_dev,
+			      const struct es581_4_urb_cmd *es581_4_urb_cmd)
+{
+	struct net_device *netdev;
+	const struct es581_4_tx_ack_msg *tx_ack_msg;
+	u16 msg_len = get_unaligned_le16(&es581_4_urb_cmd->msg_len);
+	int ret;
+
+	tx_ack_msg = &es581_4_urb_cmd->tx_ack_msg;
+	ret = es58x_check_msg_len(es58x_dev->dev, *tx_ack_msg, msg_len);
+	if (ret)
+		return ret;
+
+	if (tx_ack_msg->rx_cmd_ret_u8 != ES58X_RET_U8_OK)
+		return es58x_rx_cmd_ret_u8(es58x_dev->dev,
+					   ES58X_RET_TYPE_TX_MSG,
+					   tx_ack_msg->rx_cmd_ret_u8);
+
+	ret = es58x_get_netdev(es58x_dev, tx_ack_msg->channel_no,
+			       ES581_4_CHANNEL_IDX_OFFSET, &netdev);
+	if (ret)
+		return ret;
+
+	return es58x_tx_ack_msg(netdev,
+				get_unaligned_le16(&tx_ack_msg->tx_free_entries),
+				ES58X_RET_U32_OK);
+}
+
+static int es581_4_dispatch_rx_cmd(struct es58x_device *es58x_dev,
+				   const struct es581_4_urb_cmd *es581_4_urb_cmd)
+{
+	const struct device *dev = es58x_dev->dev;
+	u16 msg_len = get_unaligned_le16(&es581_4_urb_cmd->msg_len);
+	enum es581_4_rx_type rx_type = es581_4_urb_cmd->rx_can_msg[0].rx_type;
+	int ret = 0;
+
+	switch (rx_type) {
+	case ES581_4_RX_TYPE_MESSAGE:
+		return es581_4_rx_can_msg(es58x_dev, es581_4_urb_cmd, msg_len);
+
+	case ES581_4_RX_TYPE_ERROR:
+		ret = es58x_check_msg_len(dev, es581_4_urb_cmd->rx_err_msg,
+					  msg_len);
+		if (ret < 0)
+			return ret;
+		return es581_4_rx_err_msg(es58x_dev,
+					  &es581_4_urb_cmd->rx_err_msg);
+
+	case ES581_4_RX_TYPE_EVENT:
+		ret = es58x_check_msg_len(dev, es581_4_urb_cmd->rx_event_msg,
+					  msg_len);
+		if (ret < 0)
+			return ret;
+		return es581_4_rx_event_msg(es58x_dev,
+					    &es581_4_urb_cmd->rx_event_msg);
+
+	default:
+		dev_err(dev, "%s: Unknown rx_type 0x%02X\n", __func__, rx_type);
+		return -EBADRQC;
+	}
+}
+
+static int es581_4_handle_urb_cmd(struct es58x_device *es58x_dev,
+				  const union es58x_urb_cmd *urb_cmd)
+{
+	const struct es581_4_urb_cmd *es581_4_urb_cmd;
+	struct device *dev = es58x_dev->dev;
+	u16 msg_len = es581_4_get_msg_len(urb_cmd);
+	int ret;
+
+	es581_4_urb_cmd = &urb_cmd->es581_4_urb_cmd;
+
+	if (es581_4_urb_cmd->cmd_type != ES581_4_CAN_COMMAND_TYPE) {
+		dev_err(dev, "%s: Unknown command type (0x%02X)\n",
+			__func__, es581_4_urb_cmd->cmd_type);
+		return -EBADRQC;
+	}
+
+	switch ((enum es581_4_cmd_id)es581_4_urb_cmd->cmd_id) {
+	case ES581_4_CMD_ID_SET_BITTIMING:
+		return es581_4_rx_cmd_ret_u32(es58x_dev, es581_4_urb_cmd,
+					      ES58X_RET_TYPE_SET_BITTIMING);
+
+	case ES581_4_CMD_ID_ENABLE_CHANNEL:
+		return es581_4_rx_cmd_ret_u32(es58x_dev, es581_4_urb_cmd,
+					      ES58X_RET_TYPE_ENABLE_CHANNEL);
+
+	case ES581_4_CMD_ID_TX_MSG:
+		return es581_4_tx_ack_msg(es58x_dev, es581_4_urb_cmd);
+
+	case ES581_4_CMD_ID_RX_MSG:
+		return es581_4_dispatch_rx_cmd(es58x_dev, es581_4_urb_cmd);
+
+	case ES581_4_CMD_ID_RESET_RX:
+		ret = es581_4_rx_cmd_ret_u32(es58x_dev, es581_4_urb_cmd,
+					     ES58X_RET_TYPE_RESET_RX);
+		return ret;
+
+	case ES581_4_CMD_ID_RESET_TX:
+		ret = es581_4_rx_cmd_ret_u32(es58x_dev, es581_4_urb_cmd,
+					     ES58X_RET_TYPE_RESET_TX);
+		return ret;
+
+	case ES581_4_CMD_ID_DISABLE_CHANNEL:
+		return es581_4_rx_cmd_ret_u32(es58x_dev, es581_4_urb_cmd,
+					      ES58X_RET_TYPE_DISABLE_CHANNEL);
+
+	case ES581_4_CMD_ID_TIMESTAMP:
+		ret = es58x_check_msg_len(dev, es581_4_urb_cmd->timestamp,
+					  msg_len);
+		if (ret < 0)
+			return ret;
+		es58x_rx_timestamp(es58x_dev,
+				   get_unaligned_le64(&es581_4_urb_cmd->timestamp));
+		return 0;
+
+	case ES581_4_CMD_ID_ECHO:
+		return es581_4_echo_msg(es58x_dev, es581_4_urb_cmd);
+
+	case ES581_4_CMD_ID_DEVICE_ERR:
+		ret = es58x_check_msg_len(dev, es581_4_urb_cmd->rx_cmd_ret_u8,
+					  msg_len);
+		if (ret)
+			return ret;
+		return es58x_rx_cmd_ret_u8(dev, ES58X_RET_TYPE_DEVICE_ERR,
+					   es581_4_urb_cmd->rx_cmd_ret_u8);
+
+	default:
+		dev_warn(dev, "%s: Unexpected command ID: 0x%02X\n",
+			 __func__, es581_4_urb_cmd->cmd_id);
+		return -EBADRQC;
+	}
+}
+
+static void es581_4_fill_urb_header(union es58x_urb_cmd *urb_cmd, u8 cmd_type,
+				    u8 cmd_id, u8 channel_idx, u16 msg_len)
+{
+	struct es581_4_urb_cmd *es581_4_urb_cmd = &urb_cmd->es581_4_urb_cmd;
+
+	es581_4_urb_cmd->SOF = cpu_to_le16(es581_4_param.tx_start_of_frame);
+	es581_4_urb_cmd->cmd_type = cmd_type;
+	es581_4_urb_cmd->cmd_id = cmd_id;
+	es581_4_urb_cmd->msg_len = cpu_to_le16(msg_len);
+}
+
+static int es581_4_tx_can_msg(struct es58x_priv *priv,
+			      const struct sk_buff *skb)
+{
+	struct es58x_device *es58x_dev = priv->es58x_dev;
+	union es58x_urb_cmd *urb_cmd = priv->tx_urb->transfer_buffer;
+	struct es581_4_urb_cmd *es581_4_urb_cmd = &urb_cmd->es581_4_urb_cmd;
+	struct can_frame *cf = (struct can_frame *)skb->data;
+	struct es581_4_tx_can_msg *tx_can_msg;
+	u16 msg_len;
+	int ret;
+
+	if (can_is_canfd_skb(skb))
+		return -EMSGSIZE;
+
+	if (priv->tx_can_msg_cnt == 0) {
+		msg_len = sizeof(es581_4_urb_cmd->bulk_tx_can_msg.num_can_msg);
+		es581_4_fill_urb_header(urb_cmd, ES581_4_CAN_COMMAND_TYPE,
+					ES581_4_CMD_ID_TX_MSG,
+					priv->channel_idx, msg_len);
+		es581_4_urb_cmd->bulk_tx_can_msg.num_can_msg = 0;
+	} else {
+		msg_len = es581_4_get_msg_len(urb_cmd);
+	}
+
+	ret = es58x_check_msg_max_len(es58x_dev->dev,
+				      es581_4_urb_cmd->bulk_tx_can_msg,
+				      msg_len + sizeof(*tx_can_msg));
+	if (ret)
+		return ret;
+
+	/* Fill message contents. */
+	tx_can_msg = (typeof(tx_can_msg))&es581_4_urb_cmd->raw_msg[msg_len];
+	put_unaligned_le32(es58x_get_raw_can_id(cf), &tx_can_msg->can_id);
+	put_unaligned_le32(priv->tx_head, &tx_can_msg->packet_idx);
+	put_unaligned_le16((u16)es58x_get_flags(skb), &tx_can_msg->flags);
+	tx_can_msg->channel_no = priv->channel_idx + ES581_4_CHANNEL_IDX_OFFSET;
+	tx_can_msg->dlc = can_get_cc_dlc(cf, priv->can.ctrlmode);
+
+	memcpy(tx_can_msg->data, cf->data, cf->len);
+
+	/* Calculate new sizes. */
+	es581_4_urb_cmd->bulk_tx_can_msg.num_can_msg++;
+	msg_len += es581_4_sizeof_rx_tx_msg(*tx_can_msg);
+	priv->tx_urb->transfer_buffer_length = es58x_get_urb_cmd_len(es58x_dev,
+								     msg_len);
+	es581_4_urb_cmd->msg_len = cpu_to_le16(msg_len);
+
+	return 0;
+}
+
+static int es581_4_set_bittiming(struct es58x_priv *priv)
+{
+	struct es581_4_tx_conf_msg tx_conf_msg = { 0 };
+	struct can_bittiming *bt = &priv->can.bittiming;
+
+	tx_conf_msg.bitrate = cpu_to_le32(bt->bitrate);
+	/* bt->sample_point is in tenth of percent. Convert it to percent. */
+	tx_conf_msg.sample_point = cpu_to_le32(bt->sample_point / 10U);
+	tx_conf_msg.samples_per_bit = cpu_to_le32(ES58X_SAMPLES_PER_BIT_ONE);
+	tx_conf_msg.bit_time = cpu_to_le32(can_bit_time(bt));
+	tx_conf_msg.sjw = cpu_to_le32(bt->sjw);
+	tx_conf_msg.sync_edge = cpu_to_le32(ES58X_SYNC_EDGE_SINGLE);
+	tx_conf_msg.physical_layer =
+	    cpu_to_le32(ES58X_PHYSICAL_LAYER_HIGH_SPEED);
+	tx_conf_msg.echo_mode = cpu_to_le32(ES58X_ECHO_ON);
+	tx_conf_msg.channel_no = priv->channel_idx + ES581_4_CHANNEL_IDX_OFFSET;
+
+	return es58x_send_msg(priv->es58x_dev, ES581_4_CAN_COMMAND_TYPE,
+			      ES581_4_CMD_ID_SET_BITTIMING, &tx_conf_msg,
+			      sizeof(tx_conf_msg), priv->channel_idx);
+}
+
+static int es581_4_enable_channel(struct es58x_priv *priv)
+{
+	int ret;
+	u8 msg = priv->channel_idx + ES581_4_CHANNEL_IDX_OFFSET;
+
+	ret = es581_4_set_bittiming(priv);
+	if (ret)
+		return ret;
+
+	return es58x_send_msg(priv->es58x_dev, ES581_4_CAN_COMMAND_TYPE,
+			      ES581_4_CMD_ID_ENABLE_CHANNEL, &msg, sizeof(msg),
+			      priv->channel_idx);
+}
+
+static int es581_4_disable_channel(struct es58x_priv *priv)
+{
+	u8 msg = priv->channel_idx + ES581_4_CHANNEL_IDX_OFFSET;
+
+	return es58x_send_msg(priv->es58x_dev, ES581_4_CAN_COMMAND_TYPE,
+			      ES581_4_CMD_ID_DISABLE_CHANNEL, &msg, sizeof(msg),
+			      priv->channel_idx);
+}
+
+static int es581_4_reset_device(struct es58x_device *es58x_dev)
+{
+	return es58x_send_msg(es58x_dev, ES581_4_CAN_COMMAND_TYPE,
+			      ES581_4_CMD_ID_RESET_DEVICE,
+			      ES58X_EMPTY_MSG, 0, ES58X_CHANNEL_IDX_NA);
+}
+
+static int es581_4_get_timestamp(struct es58x_device *es58x_dev)
+{
+	return es58x_send_msg(es58x_dev, ES581_4_CAN_COMMAND_TYPE,
+			      ES581_4_CMD_ID_TIMESTAMP,
+			      ES58X_EMPTY_MSG, 0, ES58X_CHANNEL_IDX_NA);
+}
+
+/* Nominal bittiming constants for ES581.4 as specified in the
+ * microcontroller datasheet: "Stellaris(R) LM3S5B91 Microcontroller"
+ * table 17-4 "CAN Protocol Ranges" from Texas Instruments.
+ */
+static const struct can_bittiming_const es581_4_bittiming_const = {
+	.name = "ES581.4",
+	.tseg1_min = 1,
+	.tseg1_max = 8,
+	.tseg2_min = 1,
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 128,
+	.brp_inc = 1
+};
+
+const struct es58x_parameters es581_4_param = {
+	.bittiming_const = &es581_4_bittiming_const,
+	.data_bittiming_const = NULL,
+	.tdc_const = NULL,
+	.bitrate_max = 1 * MEGA /* BPS */,
+	.clock = {.freq = 50 * MEGA /* Hz */},
+	.ctrlmode_supported = CAN_CTRLMODE_CC_LEN8_DLC,
+	.tx_start_of_frame = 0xAFAF,
+	.rx_start_of_frame = 0xFAFA,
+	.tx_urb_cmd_max_len = ES581_4_TX_URB_CMD_MAX_LEN,
+	.rx_urb_cmd_max_len = ES581_4_RX_URB_CMD_MAX_LEN,
+	/* Size of internal device TX queue is 330.
+	 *
+	 * However, we witnessed some ES58X_ERR_PROT_CRC errors from
+	 * the device and thus, echo_skb_max was lowered to the
+	 * empirical value of 75 which seems stable and then rounded
+	 * down to become a power of two.
+	 *
+	 * Root cause of those ES58X_ERR_PROT_CRC errors is still
+	 * unclear.
+	 */
+	.fifo_mask = 63, /* echo_skb_max = 64 */
+	.dql_min_limit = CAN_FRAME_LEN_MAX * 50, /* Empirical value. */
+	.tx_bulk_max = ES581_4_TX_BULK_MAX,
+	.urb_cmd_header_len = ES581_4_URB_CMD_HEADER_LEN,
+	.rx_urb_max = ES58X_RX_URBS_MAX,
+	.tx_urb_max = ES58X_TX_URBS_MAX
+};
+
+const struct es58x_operators es581_4_ops = {
+	.get_msg_len = es581_4_get_msg_len,
+	.handle_urb_cmd = es581_4_handle_urb_cmd,
+	.fill_urb_header = es581_4_fill_urb_header,
+	.tx_can_msg = es581_4_tx_can_msg,
+	.enable_channel = es581_4_enable_channel,
+	.disable_channel = es581_4_disable_channel,
+	.reset_device = es581_4_reset_device,
+	.get_timestamp = es581_4_get_timestamp
+};

linux-7.2.3/drivers/net/can/usb/etas_es58x/es581_4.h

@@ -0,0 +1,207 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* Driver for ETAS GmbH ES58X USB CAN(-FD) Bus Interfaces.
+ *
+ * File es581_4.h: Definitions and declarations specific to ETAS
+ * ES581.4.
+ *
+ * Copyright (c) 2019 Robert Bosch Engineering and Business Solutions. All rights reserved.
+ * Copyright (c) 2020 ETAS K.K.. All rights reserved.
+ * Copyright (c) 2020, 2021 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
+ */
+
+#ifndef __ES581_4_H__
+#define __ES581_4_H__
+
+#include <linux/types.h>
+
+#define ES581_4_NUM_CAN_CH 2
+#define ES581_4_CHANNEL_IDX_OFFSET 1
+
+#define ES581_4_TX_BULK_MAX 25
+#define ES581_4_RX_BULK_MAX 30
+#define ES581_4_ECHO_BULK_MAX 30
+
+enum es581_4_cmd_type {
+	ES581_4_CAN_COMMAND_TYPE = 0x45
+};
+
+enum es581_4_cmd_id {
+	ES581_4_CMD_ID_OPEN_CHANNEL = 0x01,
+	ES581_4_CMD_ID_CLOSE_CHANNEL = 0x02,
+	ES581_4_CMD_ID_SET_BITTIMING = 0x03,
+	ES581_4_CMD_ID_ENABLE_CHANNEL = 0x04,
+	ES581_4_CMD_ID_TX_MSG = 0x05,
+	ES581_4_CMD_ID_RX_MSG = 0x06,
+	ES581_4_CMD_ID_RESET_RX = 0x0A,
+	ES581_4_CMD_ID_RESET_TX = 0x0B,
+	ES581_4_CMD_ID_DISABLE_CHANNEL = 0x0C,
+	ES581_4_CMD_ID_TIMESTAMP = 0x0E,
+	ES581_4_CMD_ID_RESET_DEVICE = 0x28,
+	ES581_4_CMD_ID_ECHO = 0x71,
+	ES581_4_CMD_ID_DEVICE_ERR = 0x72
+};
+
+enum es581_4_rx_type {
+	ES581_4_RX_TYPE_MESSAGE = 1,
+	ES581_4_RX_TYPE_ERROR = 3,
+	ES581_4_RX_TYPE_EVENT = 4
+};
+
+/**
+ * struct es581_4_tx_conf_msg - Channel configuration.
+ * @bitrate: Bitrate.
+ * @sample_point: Sample point is in percent [0..100].
+ * @samples_per_bit: type enum es58x_samples_per_bit.
+ * @bit_time: Number of time quanta in one bit.
+ * @sjw: Synchronization Jump Width.
+ * @sync_edge: type enum es58x_sync_edge.
+ * @physical_layer: type enum es58x_physical_layer.
+ * @echo_mode: type enum es58x_echo_mode.
+ * @channel_no: Channel number, starting from 1. Not to be confused
+ *	with channed_idx of the ES58X FD which starts from 0.
+ */
+struct es581_4_tx_conf_msg {
+	__le32 bitrate;
+	__le32 sample_point;
+	__le32 samples_per_bit;
+	__le32 bit_time;
+	__le32 sjw;
+	__le32 sync_edge;
+	__le32 physical_layer;
+	__le32 echo_mode;
+	u8 channel_no;
+} __packed;
+
+struct es581_4_tx_can_msg {
+	__le32 can_id;
+	__le32 packet_idx;
+	__le16 flags;
+	u8 channel_no;
+	u8 dlc;
+	u8 data[CAN_MAX_DLEN];
+} __packed;
+
+/* The ES581.4 allows bulk transfer.  */
+struct es581_4_bulk_tx_can_msg {
+	u8 num_can_msg;
+	/* Using type "u8[]" instead of "struct es581_4_tx_can_msg[]"
+	 * for tx_msg_buf because each member has a flexible size.
+	 */
+	u8 tx_can_msg_buf[ES581_4_TX_BULK_MAX *
+			  sizeof(struct es581_4_tx_can_msg)];
+} __packed;
+
+struct es581_4_echo_msg {
+	__le64 timestamp;
+	__le32 packet_idx;
+} __packed;
+
+struct es581_4_bulk_echo_msg {
+	u8 channel_no;
+	struct es581_4_echo_msg echo_msg[ES581_4_ECHO_BULK_MAX];
+} __packed;
+
+/* Normal Rx CAN Message */
+struct es581_4_rx_can_msg {
+	__le64 timestamp;
+	u8 rx_type;		/* type enum es581_4_rx_type */
+	u8 flags;		/* type enum es58x_flag */
+	u8 channel_no;
+	u8 dlc;
+	__le32 can_id;
+	u8 data[CAN_MAX_DLEN];
+} __packed;
+
+struct es581_4_rx_err_msg {
+	__le64 timestamp;
+	__le16 rx_type;		/* type enum es581_4_rx_type */
+	__le16 flags;		/* type enum es58x_flag */
+	u8 channel_no;
+	u8 __padding[2];
+	u8 dlc;
+	__le32 tag;		/* Related to the CAN filtering. Unused in this module */
+	__le32 can_id;
+	__le32 error;		/* type enum es58x_error */
+	__le32 destination;	/* Unused in this module */
+} __packed;
+
+struct es581_4_rx_event_msg {
+	__le64 timestamp;
+	__le16 rx_type;		/* type enum es581_4_rx_type */
+	u8 channel_no;
+	u8 __padding;
+	__le32 tag;		/* Related to the CAN filtering. Unused in this module */
+	__le32 event;		/* type enum es58x_event */
+	__le32 destination;	/* Unused in this module */
+} __packed;
+
+struct es581_4_tx_ack_msg {
+	__le16 tx_free_entries;	/* Number of remaining free entries in the device TX queue */
+	u8 channel_no;
+	u8 rx_cmd_ret_u8;	/* type enum es58x_cmd_ret_code_u8 */
+} __packed;
+
+struct es581_4_rx_cmd_ret {
+	__le32 rx_cmd_ret_le32;
+	u8 channel_no;
+	u8 __padding[3];
+} __packed;
+
+/**
+ * struct es581_4_urb_cmd - Commands received from or sent to the
+ *	ES581.4 device.
+ * @SOF: Start of Frame.
+ * @cmd_type: Command Type (type: enum es581_4_cmd_type). The CRC
+ *	calculation starts at this position.
+ * @cmd_id: Command ID (type: enum es581_4_cmd_id).
+ * @msg_len: Length of the message, excluding CRC (i.e. length of the
+ *	union).
+ * @tx_conf_msg: Channel configuration.
+ * @bulk_tx_can_msg: Tx messages.
+ * @rx_can_msg: Array of Rx messages.
+ * @bulk_echo_msg: Tx message being looped back.
+ * @rx_err_msg: Error message.
+ * @rx_event_msg: Event message.
+ * @tx_ack_msg: Tx acknowledgment message.
+ * @rx_cmd_ret: Command return code.
+ * @timestamp: Timestamp reply.
+ * @rx_cmd_ret_u8: Rx 8 bits return code (type: enum
+ *	es58x_cmd_ret_code_u8).
+ * @raw_msg: Message raw payload.
+ * @reserved_for_crc16_do_not_use: The structure ends with a
+ *	CRC16. Because the structures in above union are of variable
+ *	lengths, we can not predict the offset of the CRC in
+ *	advance. Use functions es58x_get_crc() and es58x_set_crc() to
+ *	manipulate it.
+ */
+struct es581_4_urb_cmd {
+	__le16 SOF;
+	u8 cmd_type;
+	u8 cmd_id;
+	__le16 msg_len;
+
+	union {
+		struct es581_4_tx_conf_msg tx_conf_msg;
+		struct es581_4_bulk_tx_can_msg bulk_tx_can_msg;
+		struct es581_4_rx_can_msg rx_can_msg[ES581_4_RX_BULK_MAX];
+		struct es581_4_bulk_echo_msg bulk_echo_msg;
+		struct es581_4_rx_err_msg rx_err_msg;
+		struct es581_4_rx_event_msg rx_event_msg;
+		struct es581_4_tx_ack_msg tx_ack_msg;
+		struct es581_4_rx_cmd_ret rx_cmd_ret;
+		__le64 timestamp;
+		u8 rx_cmd_ret_u8;
+		DECLARE_FLEX_ARRAY(u8, raw_msg);
+	} __packed;
+
+	__le16 reserved_for_crc16_do_not_use;
+} __packed;
+
+#define ES581_4_URB_CMD_HEADER_LEN (offsetof(struct es581_4_urb_cmd, raw_msg))
+#define ES581_4_TX_URB_CMD_MAX_LEN					\
+	ES58X_SIZEOF_URB_CMD(struct es581_4_urb_cmd, bulk_tx_can_msg)
+#define ES581_4_RX_URB_CMD_MAX_LEN					\
+	ES58X_SIZEOF_URB_CMD(struct es581_4_urb_cmd, rx_can_msg)
+
+#endif /* __ES581_4_H__ */

linux-7.2.3/drivers/net/can/usb/etas_es58x/es58x_core.h

@@ -0,0 +1,750 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* Driver for ETAS GmbH ES58X USB CAN(-FD) Bus Interfaces.
+ *
+ * File es58x_core.h: All common definitions and declarations.
+ *
+ * Copyright (c) 2019 Robert Bosch Engineering and Business Solutions. All rights reserved.
+ * Copyright (c) 2020 ETAS K.K.. All rights reserved.
+ * Copyright (c) 2020-2022 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
+ */
+
+#ifndef __ES58X_COMMON_H__
+#define __ES58X_COMMON_H__
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/netdevice.h>
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <net/devlink.h>
+
+#include "es581_4.h"
+#include "es58x_fd.h"
+
+/* Driver constants */
+#define ES58X_RX_URBS_MAX 5	/* Empirical value */
+#define ES58X_TX_URBS_MAX 6	/* Empirical value */
+
+#define ES58X_MAX(param)				\
+	(ES581_4_##param > ES58X_FD_##param ?		\
+		ES581_4_##param : ES58X_FD_##param)
+#define ES58X_TX_BULK_MAX ES58X_MAX(TX_BULK_MAX)
+#define ES58X_RX_BULK_MAX ES58X_MAX(RX_BULK_MAX)
+#define ES58X_ECHO_BULK_MAX ES58X_MAX(ECHO_BULK_MAX)
+#define ES58X_NUM_CAN_CH_MAX ES58X_MAX(NUM_CAN_CH)
+
+/* Use this when channel index is irrelevant (e.g. device
+ * timestamp).
+ */
+#define ES58X_CHANNEL_IDX_NA 0xFF
+#define ES58X_EMPTY_MSG NULL
+
+/* Threshold on consecutive CAN_STATE_ERROR_PASSIVE. If we receive
+ * ES58X_CONSECUTIVE_ERR_PASSIVE_MAX times the event
+ * ES58X_ERR_CRTL_PASSIVE in a row without any successful RX or TX,
+ * we force the device to switch to CAN_STATE_BUS_OFF state.
+ */
+#define ES58X_CONSECUTIVE_ERR_PASSIVE_MAX 254
+
+/* A magic number sent by the ES581.4 to inform it is alive. */
+#define ES58X_HEARTBEAT 0x11
+
+/**
+ * enum es58x_driver_info - Quirks of the device.
+ * @ES58X_DUAL_CHANNEL: Device has two CAN channels. If this flag is
+ *	not set, it is implied that the device has only one CAN
+ *	channel.
+ * @ES58X_FD_FAMILY: Device is CAN-FD capable. If this flag is not
+ *	set, the device only supports classical CAN.
+ */
+enum es58x_driver_info {
+	ES58X_DUAL_CHANNEL = BIT(0),
+	ES58X_FD_FAMILY = BIT(1)
+};
+
+enum es58x_echo {
+	ES58X_ECHO_OFF = 0,
+	ES58X_ECHO_ON = 1
+};
+
+/**
+ * enum es58x_physical_layer - Type of the physical layer.
+ * @ES58X_PHYSICAL_LAYER_HIGH_SPEED: High-speed CAN (c.f. ISO
+ *	11898-2).
+ *
+ * Some products of the ETAS portfolio also support low-speed CAN
+ * (c.f. ISO 11898-3). However, all the devices in scope of this
+ * driver do not support the option, thus, the enum has only one
+ * member.
+ */
+enum es58x_physical_layer {
+	ES58X_PHYSICAL_LAYER_HIGH_SPEED = 1
+};
+
+enum es58x_samples_per_bit {
+	ES58X_SAMPLES_PER_BIT_ONE = 1,
+	ES58X_SAMPLES_PER_BIT_THREE = 2
+};
+
+/**
+ * enum es58x_sync_edge - Synchronization method.
+ * @ES58X_SYNC_EDGE_SINGLE: ISO CAN specification defines the use of a
+ *	single edge synchronization.  The synchronization should be
+ *	done on recessive to dominant level change.
+ *
+ * For information, ES582.1 and ES584.1 also support a double
+ * synchronization, requiring both recessive to dominant then dominant
+ * to recessive level change. However, this is not supported in
+ * SocketCAN framework, thus, the enum has only one member.
+ */
+enum es58x_sync_edge {
+	ES58X_SYNC_EDGE_SINGLE = 1
+};
+
+/**
+ * enum es58x_flag - CAN flags for RX/TX messages.
+ * @ES58X_FLAG_EFF: Extended Frame Format (EFF).
+ * @ES58X_FLAG_RTR: Remote Transmission Request (RTR).
+ * @ES58X_FLAG_FD_BRS: Bit rate switch (BRS): second bitrate for
+ *	payload data.
+ * @ES58X_FLAG_FD_ESI: Error State Indicator (ESI): tell if the
+ *	transmitting node is in error passive mode.
+ * @ES58X_FLAG_FD_DATA: CAN FD frame.
+ */
+enum es58x_flag {
+	ES58X_FLAG_EFF = BIT(0),
+	ES58X_FLAG_RTR = BIT(1),
+	ES58X_FLAG_FD_BRS = BIT(3),
+	ES58X_FLAG_FD_ESI = BIT(5),
+	ES58X_FLAG_FD_DATA = BIT(6)
+};
+
+/**
+ * enum es58x_err - CAN error detection.
+ * @ES58X_ERR_OK: No errors.
+ * @ES58X_ERR_PROT_STUFF: Bit stuffing error: more than 5 consecutive
+ *	equal bits.
+ * @ES58X_ERR_PROT_FORM: Frame format error.
+ * @ES58X_ERR_ACK: Received no ACK on transmission.
+ * @ES58X_ERR_PROT_BIT: Single bit error.
+ * @ES58X_ERR_PROT_CRC: Incorrect 15, 17 or 21 bits CRC.
+ * @ES58X_ERR_PROT_BIT1: Unable to send recessive bit: tried to send
+ *	recessive bit 1 but monitored dominant bit 0.
+ * @ES58X_ERR_PROT_BIT0: Unable to send dominant bit: tried to send
+ *	dominant bit 0 but monitored recessive bit 1.
+ * @ES58X_ERR_PROT_OVERLOAD: Bus overload.
+ * @ES58X_ERR_PROT_UNSPEC: Unspecified.
+ *
+ * Please refer to ISO 11898-1:2015, section 10.11 "Error detection"
+ * and section 10.13 "Overload signaling" for additional details.
+ */
+enum es58x_err {
+	ES58X_ERR_OK = 0,
+	ES58X_ERR_PROT_STUFF = BIT(0),
+	ES58X_ERR_PROT_FORM = BIT(1),
+	ES58X_ERR_ACK = BIT(2),
+	ES58X_ERR_PROT_BIT = BIT(3),
+	ES58X_ERR_PROT_CRC = BIT(4),
+	ES58X_ERR_PROT_BIT1 = BIT(5),
+	ES58X_ERR_PROT_BIT0 = BIT(6),
+	ES58X_ERR_PROT_OVERLOAD = BIT(7),
+	ES58X_ERR_PROT_UNSPEC = BIT(31)
+};
+
+/**
+ * enum es58x_event - CAN error codes returned by the device.
+ * @ES58X_EVENT_OK: No errors.
+ * @ES58X_EVENT_CRTL_ACTIVE: Active state: both TR and RX error count
+ *	is less than 128.
+ * @ES58X_EVENT_CRTL_PASSIVE: Passive state: either TX or RX error
+ *	count is greater than 127.
+ * @ES58X_EVENT_CRTL_WARNING: Warning state: either TX or RX error
+ *	count is greater than 96.
+ * @ES58X_EVENT_BUSOFF: Bus off.
+ * @ES58X_EVENT_SINGLE_WIRE: Lost connection on either CAN high or CAN
+ *	low.
+ *
+ * Please refer to ISO 11898-1:2015, section 12.1.4 "Rules of fault
+ * confinement" for additional details.
+ */
+enum es58x_event {
+	ES58X_EVENT_OK = 0,
+	ES58X_EVENT_CRTL_ACTIVE = BIT(0),
+	ES58X_EVENT_CRTL_PASSIVE = BIT(1),
+	ES58X_EVENT_CRTL_WARNING = BIT(2),
+	ES58X_EVENT_BUSOFF = BIT(3),
+	ES58X_EVENT_SINGLE_WIRE = BIT(4)
+};
+
+/* enum es58x_ret_u8 - Device return error codes, 8 bit format.
+ *
+ * Specific to ES581.4.
+ */
+enum es58x_ret_u8 {
+	ES58X_RET_U8_OK = 0x00,
+	ES58X_RET_U8_ERR_UNSPECIFIED_FAILURE = 0x80,
+	ES58X_RET_U8_ERR_NO_MEM = 0x81,
+	ES58X_RET_U8_ERR_BAD_CRC = 0x99
+};
+
+/* enum es58x_ret_u32 - Device return error codes, 32 bit format.
+ */
+enum es58x_ret_u32 {
+	ES58X_RET_U32_OK = 0x00000000UL,
+	ES58X_RET_U32_ERR_UNSPECIFIED_FAILURE = 0x80000000UL,
+	ES58X_RET_U32_ERR_NO_MEM = 0x80004001UL,
+	ES58X_RET_U32_WARN_PARAM_ADJUSTED = 0x40004000UL,
+	ES58X_RET_U32_WARN_TX_MAYBE_REORDER = 0x40004001UL,
+	ES58X_RET_U32_ERR_TIMEDOUT = 0x80000008UL,
+	ES58X_RET_U32_ERR_FIFO_FULL = 0x80003002UL,
+	ES58X_RET_U32_ERR_BAD_CONFIG = 0x80004000UL,
+	ES58X_RET_U32_ERR_NO_RESOURCE = 0x80004002UL
+};
+
+/* enum es58x_ret_type - Type of the command returned by the ES58X
+ *	device.
+ */
+enum es58x_ret_type {
+	ES58X_RET_TYPE_SET_BITTIMING,
+	ES58X_RET_TYPE_ENABLE_CHANNEL,
+	ES58X_RET_TYPE_DISABLE_CHANNEL,
+	ES58X_RET_TYPE_TX_MSG,
+	ES58X_RET_TYPE_RESET_RX,
+	ES58X_RET_TYPE_RESET_TX,
+	ES58X_RET_TYPE_DEVICE_ERR
+};
+
+union es58x_urb_cmd {
+	struct es581_4_urb_cmd es581_4_urb_cmd;
+	struct es58x_fd_urb_cmd es58x_fd_urb_cmd;
+	struct {		/* Common header parts of all variants */
+		__le16 sof;
+		u8 cmd_type;
+		u8 cmd_id;
+	} __packed;
+	DECLARE_FLEX_ARRAY(u8, raw_cmd);
+};
+
+/**
+ * struct es58x_priv - All information specific to a CAN channel.
+ * @can: struct can_priv must be the first member (Socket CAN relies
+ *	on the fact that function netdev_priv() returns a pointer to
+ *	a struct can_priv).
+ * @devlink_port: devlink instance for the network interface.
+ * @es58x_dev: pointer to the corresponding ES58X device.
+ * @tx_urb: Used as a buffer to concatenate the TX messages and to do
+ *	a bulk send. Please refer to es58x_start_xmit() for more
+ *	details.
+ * @tx_tail: Index of the oldest packet still pending for
+ *	completion. @tx_tail & echo_skb_mask represents the beginning
+ *	of the echo skb FIFO, i.e. index of the first element.
+ * @tx_head: Index of the next packet to be sent to the
+ *	device. @tx_head & echo_skb_mask represents the end of the
+ *	echo skb FIFO plus one, i.e. the first free index.
+ * @tx_can_msg_cnt: Number of messages in @tx_urb.
+ * @tx_can_msg_is_fd: false: all messages in @tx_urb are Classical
+ *	CAN, true: all messages in @tx_urb are CAN FD. Rationale:
+ *	ES58X FD devices do not allow to mix Classical CAN and FD CAN
+ *	frames in one single bulk transmission.
+ * @err_passive_before_rtx_success: The ES58X device might enter in a
+ *	state in which it keeps alternating between error passive
+ *	and active states. This counter keeps track of the number of
+ *	error passive and if it gets bigger than
+ *	ES58X_CONSECUTIVE_ERR_PASSIVE_MAX, es58x_rx_err_msg() will
+ *	force the status to bus-off.
+ * @channel_idx: Channel index, starts at zero.
+ */
+struct es58x_priv {
+	struct can_priv can;
+	struct devlink_port devlink_port;
+	struct es58x_device *es58x_dev;
+	struct urb *tx_urb;
+
+	u32 tx_tail;
+	u32 tx_head;
+
+	u8 tx_can_msg_cnt;
+	bool tx_can_msg_is_fd;
+
+	u8 err_passive_before_rtx_success;
+
+	u8 channel_idx;
+};
+
+/**
+ * struct es58x_parameters - Constant parameters of a given hardware
+ *	variant.
+ * @bittiming_const: Nominal bittimming constant parameters.
+ * @data_bittiming_const: Data bittiming constant parameters.
+ * @tdc_const: Transmission Delay Compensation constant parameters.
+ * @bitrate_max: Maximum bitrate supported by the device.
+ * @clock: CAN clock parameters.
+ * @ctrlmode_supported: List of supported modes. Please refer to
+ *	can/netlink.h file for additional details.
+ * @tx_start_of_frame: Magic number at the beginning of each TX URB
+ *	command.
+ * @rx_start_of_frame: Magic number at the beginning of each RX URB
+ *	command.
+ * @tx_urb_cmd_max_len: Maximum length of a TX URB command.
+ * @rx_urb_cmd_max_len: Maximum length of a RX URB command.
+ * @fifo_mask: Bit mask to quickly convert the tx_tail and tx_head
+ *	field of the struct es58x_priv into echo_skb
+ *	indexes. Properties: @fifo_mask = echo_skb_max - 1 where
+ *	echo_skb_max must be a power of two. Also, echo_skb_max must
+ *	not exceed the maximum size of the device internal TX FIFO
+ *	length. This parameter is used to control the network queue
+ *	wake/stop logic.
+ * @dql_min_limit: Dynamic Queue Limits (DQL) absolute minimum limit
+ *	of bytes allowed to be queued on this network device transmit
+ *	queue. Used by the Byte Queue Limits (BQL) to determine how
+ *	frequently the xmit_more flag will be set to true in
+ *	es58x_start_xmit(). Set this value higher to optimize for
+ *	throughput but be aware that it might have a negative impact
+ *	on the latency! This value can also be set dynamically. Please
+ *	refer to Documentation/ABI/testing/sysfs-class-net-queues for
+ *	more details.
+ * @tx_bulk_max: Maximum number of TX messages that can be sent in one
+ *	single URB packet.
+ * @urb_cmd_header_len: Length of the URB command header.
+ * @rx_urb_max: Number of RX URB to be allocated during device probe.
+ * @tx_urb_max: Number of TX URB to be allocated during device probe.
+ */
+struct es58x_parameters {
+	const struct can_bittiming_const *bittiming_const;
+	const struct can_bittiming_const *data_bittiming_const;
+	const struct can_tdc_const *tdc_const;
+	u32 bitrate_max;
+	struct can_clock clock;
+	u32 ctrlmode_supported;
+	u16 tx_start_of_frame;
+	u16 rx_start_of_frame;
+	u16 tx_urb_cmd_max_len;
+	u16 rx_urb_cmd_max_len;
+	u16 fifo_mask;
+	u16 dql_min_limit;
+	u8 tx_bulk_max;
+	u8 urb_cmd_header_len;
+	u8 rx_urb_max;
+	u8 tx_urb_max;
+};
+
+/**
+ * struct es58x_operators - Function pointers used to encode/decode
+ *	the TX/RX messages.
+ * @get_msg_len: Get field msg_len of the urb_cmd. The offset of
+ *	msg_len inside urb_cmd depends of the device model.
+ * @handle_urb_cmd: Decode the URB command received from the device
+ *	and dispatch it to the relevant sub function.
+ * @fill_urb_header: Fill the header of urb_cmd.
+ * @tx_can_msg: Encode a TX CAN message and add it to the bulk buffer
+ *	cmd_buf of es58x_dev.
+ * @enable_channel: Start the CAN channel.
+ * @disable_channel: Stop the CAN channel.
+ * @reset_device: Full reset of the device. N.B: this feature is only
+ *	present on the ES581.4. For ES58X FD devices, this field is
+ *	set to NULL.
+ * @get_timestamp: Request a timestamp from the ES58X device.
+ */
+struct es58x_operators {
+	u16 (*get_msg_len)(const union es58x_urb_cmd *urb_cmd);
+	int (*handle_urb_cmd)(struct es58x_device *es58x_dev,
+			      const union es58x_urb_cmd *urb_cmd);
+	void (*fill_urb_header)(union es58x_urb_cmd *urb_cmd, u8 cmd_type,
+				u8 cmd_id, u8 channel_idx, u16 cmd_len);
+	int (*tx_can_msg)(struct es58x_priv *priv, const struct sk_buff *skb);
+	int (*enable_channel)(struct es58x_priv *priv);
+	int (*disable_channel)(struct es58x_priv *priv);
+	int (*reset_device)(struct es58x_device *es58x_dev);
+	int (*get_timestamp)(struct es58x_device *es58x_dev);
+};
+
+/**
+ * struct es58x_sw_version - Version number of the firmware or the
+ *	bootloader.
+ * @major: Version major number, represented on two digits.
+ * @minor: Version minor number, represented on two digits.
+ * @revision: Version revision number, represented on two digits.
+ *
+ * The firmware and the bootloader share the same format: "xx.xx.xx"
+ * where 'x' is a digit. Both can be retrieved from the product
+ * information string.
+ */
+struct es58x_sw_version {
+	u8 major;
+	u8 minor;
+	u8 revision;
+};
+
+/**
+ * struct es58x_hw_revision - Hardware revision number.
+ * @letter: Revision letter, an alphanumeric character.
+ * @major: Version major number, represented on three digits.
+ * @minor: Version minor number, represented on three digits.
+ *
+ * The hardware revision uses its own format: "axxx/xxx" where 'a' is
+ * an alphanumeric character and 'x' a digit. It can be retrieved from
+ * the product information string.
+ */
+struct es58x_hw_revision {
+	char letter;
+	u16 major;
+	u16 minor;
+};
+
+/**
+ * struct es58x_device - All information specific to an ES58X device.
+ * @dev: Device information.
+ * @udev: USB device information.
+ * @netdev: Array of our CAN channels.
+ * @param: The constant parameters.
+ * @ops: Operators.
+ * @rx_pipe: USB reception pipe.
+ * @tx_pipe: USB transmission pipe.
+ * @rx_urbs: Anchor for received URBs.
+ * @tx_urbs_busy: Anchor for TX URBs which were send to the device.
+ * @tx_urbs_idle: Anchor for TX USB which are idle. This driver
+ *	allocates the memory for the URBs during the probe. When a TX
+ *	URB is needed, it can be taken from this anchor. The network
+ *	queue wake/stop logic should prevent this URB from getting
+ *	empty. Please refer to es58x_get_tx_urb() for more details.
+ * @tx_urbs_idle_cnt: number of urbs in @tx_urbs_idle.
+ * @firmware_version: The firmware version number.
+ * @bootloader_version: The bootloader version number.
+ * @hardware_revision: The hardware revision number.
+ * @ktime_req_ns: kernel timestamp when es58x_set_realtime_diff_ns()
+ *	was called.
+ * @realtime_diff_ns: difference in nanoseconds between the clocks of
+ *	the ES58X device and the kernel.
+ * @timestamps: a temporary buffer to store the time stamps before
+ *	feeding them to es58x_can_get_echo_skb(). Can only be used
+ *	in RX branches.
+ * @num_can_ch: Number of CAN channel (i.e. number of elements of @netdev).
+ * @opened_channel_cnt: number of channels opened. Free of race
+ *	conditions because its two users (net_device_ops:ndo_open()
+ *	and net_device_ops:ndo_close()) guarantee that the network
+ *	stack big kernel lock (a.k.a. rtnl_mutex) is being hold.
+ * @rx_cmd_buf_len: Length of @rx_cmd_buf.
+ * @rx_cmd_buf: The device might split the URB commands in an
+ *	arbitrary amount of pieces. This buffer is used to concatenate
+ *	all those pieces. Can only be used in RX branches. This field
+ *	has to be the last one of the structure because it is has a
+ *	flexible size (c.f. es58x_sizeof_es58x_device() function).
+ */
+struct es58x_device {
+	struct device *dev;
+	struct usb_device *udev;
+	struct net_device *netdev[ES58X_NUM_CAN_CH_MAX];
+
+	const struct es58x_parameters *param;
+	const struct es58x_operators *ops;
+
+	unsigned int rx_pipe;
+	unsigned int tx_pipe;
+
+	struct usb_anchor rx_urbs;
+	struct usb_anchor tx_urbs_busy;
+	struct usb_anchor tx_urbs_idle;
+	atomic_t tx_urbs_idle_cnt;
+
+	struct es58x_sw_version firmware_version;
+	struct es58x_sw_version bootloader_version;
+	struct es58x_hw_revision hardware_revision;
+
+	u64 ktime_req_ns;
+	s64 realtime_diff_ns;
+
+	u64 timestamps[ES58X_ECHO_BULK_MAX];
+
+	u8 num_can_ch;
+	u8 opened_channel_cnt;
+
+	u16 rx_cmd_buf_len;
+	union es58x_urb_cmd rx_cmd_buf;
+};
+
+/**
+ * es58x_sizeof_es58x_device() - Calculate the maximum length of
+ *	struct es58x_device.
+ * @es58x_dev_param: The constant parameters of the device.
+ *
+ * The length of struct es58x_device depends on the length of its last
+ * field: rx_cmd_buf. This macro allows to optimize the memory
+ * allocation.
+ *
+ * Return: length of struct es58x_device.
+ */
+static inline size_t es58x_sizeof_es58x_device(const struct es58x_parameters
+					       *es58x_dev_param)
+{
+	return offsetof(struct es58x_device, rx_cmd_buf) +
+		es58x_dev_param->rx_urb_cmd_max_len;
+}
+
+static inline int __es58x_check_msg_len(const struct device *dev,
+					const char *stringified_msg,
+					size_t actual_len, size_t expected_len)
+{
+	if (expected_len != actual_len) {
+		dev_err(dev,
+			"Length of %s is %zu but received command is %zu.\n",
+			stringified_msg, expected_len, actual_len);
+		return -EMSGSIZE;
+	}
+	return 0;
+}
+
+/**
+ * es58x_check_msg_len() - Check the size of a received message.
+ * @dev: Device, used to print error messages.
+ * @msg: Received message, must not be a pointer.
+ * @actual_len: Length of the message as advertised in the command header.
+ *
+ * Must be a macro in order to accept the different types of messages
+ * as an input. Can be use with any of the messages which have a fixed
+ * length. Check for an exact match of the size.
+ *
+ * Return: zero on success, -EMSGSIZE if @actual_len differs from the
+ * expected length.
+ */
+#define es58x_check_msg_len(dev, msg, actual_len)			\
+	__es58x_check_msg_len(dev, __stringify(msg),			\
+			      actual_len, sizeof(msg))
+
+static inline int __es58x_check_msg_max_len(const struct device *dev,
+					    const char *stringified_msg,
+					    size_t actual_len,
+					    size_t expected_len)
+{
+	if (actual_len > expected_len) {
+		dev_err(dev,
+			"Maximum length for %s is %zu but received command is %zu.\n",
+			stringified_msg, expected_len, actual_len);
+		return -EOVERFLOW;
+	}
+	return 0;
+}
+
+/**
+ * es58x_check_msg_max_len() - Check the maximum size of a received message.
+ * @dev: Device, used to print error messages.
+ * @msg: Received message, must not be a pointer.
+ * @actual_len: Length of the message as advertised in the command header.
+ *
+ * Must be a macro in order to accept the different types of messages
+ * as an input. To be used with the messages of variable sizes. Only
+ * check that the message is not bigger than the maximum expected
+ * size.
+ *
+ * Return: zero on success, -EOVERFLOW if @actual_len is greater than
+ * the expected length.
+ */
+#define es58x_check_msg_max_len(dev, msg, actual_len)			\
+	__es58x_check_msg_max_len(dev, __stringify(msg),		\
+				  actual_len, sizeof(msg))
+
+static inline int __es58x_msg_num_element(const struct device *dev,
+					  const char *stringified_msg,
+					  size_t actual_len, size_t msg_len,
+					  size_t elem_len)
+{
+	size_t actual_num_elem = actual_len / elem_len;
+	size_t expected_num_elem = msg_len / elem_len;
+
+	if (actual_num_elem == 0) {
+		dev_err(dev,
+			"Minimum length for %s is %zu but received command is %zu.\n",
+			stringified_msg, elem_len, actual_len);
+		return -EMSGSIZE;
+	} else if ((actual_len % elem_len) != 0) {
+		dev_err(dev,
+			"Received command length: %zu is not a multiple of %s[0]: %zu\n",
+			actual_len, stringified_msg, elem_len);
+		return -EMSGSIZE;
+	} else if (actual_num_elem > expected_num_elem) {
+		dev_err(dev,
+			"Array %s is supposed to have %zu elements each of size %zu...\n",
+			stringified_msg, expected_num_elem, elem_len);
+		dev_err(dev,
+			"... But received command has %zu elements (total length %zu).\n",
+			actual_num_elem, actual_len);
+		return -EOVERFLOW;
+	}
+	return actual_num_elem;
+}
+
+/**
+ * es58x_msg_num_element() - Check size and give the number of
+ *	elements in a message of array type.
+ * @dev: Device, used to print error messages.
+ * @msg: Received message, must be an array.
+ * @actual_len: Length of the message as advertised in the command
+ *	header.
+ *
+ * Must be a macro in order to accept the different types of messages
+ * as an input. To be used on message of array type. Array's element
+ * has to be of fixed size (else use es58x_check_msg_max_len()). Check
+ * that the total length is an exact multiple of the length of a
+ * single element.
+ *
+ * Return: number of elements in the array on success, -EOVERFLOW if
+ * @actual_len is greater than the expected length, -EMSGSIZE if
+ * @actual_len is not a multiple of a single element.
+ */
+#define es58x_msg_num_element(dev, msg, actual_len)			\
+({									\
+	size_t __elem_len = sizeof((msg)[0]) + __must_be_array(msg);	\
+	__es58x_msg_num_element(dev, __stringify(msg), actual_len,	\
+				sizeof(msg), __elem_len);		\
+})
+
+/**
+ * es58x_priv() - Get the priv member and cast it to struct es58x_priv.
+ * @netdev: CAN network device.
+ *
+ * Return: ES58X device.
+ */
+static inline struct es58x_priv *es58x_priv(struct net_device *netdev)
+{
+	return (struct es58x_priv *)netdev_priv(netdev);
+}
+
+/**
+ * ES58X_SIZEOF_URB_CMD() - Calculate the maximum length of an urb
+ *	command for a given message field name.
+ * @es58x_urb_cmd_type: type (either "struct es581_4_urb_cmd" or
+ *	"struct es58x_fd_urb_cmd").
+ * @msg_field: name of the message field.
+ *
+ * Must be a macro in order to accept the different command types as
+ * an input.
+ *
+ * Return: length of the urb command.
+ */
+#define ES58X_SIZEOF_URB_CMD(es58x_urb_cmd_type, msg_field)		\
+	(offsetof(es58x_urb_cmd_type, raw_msg)				\
+		+ sizeof_field(es58x_urb_cmd_type, msg_field)		\
+		+ sizeof_field(es58x_urb_cmd_type,			\
+			       reserved_for_crc16_do_not_use))
+
+/**
+ * es58x_get_urb_cmd_len() - Calculate the actual length of an urb
+ *	command for a given message length.
+ * @es58x_dev: ES58X device.
+ * @msg_len: Length of the message.
+ *
+ * Add the header and CRC lengths to the message length.
+ *
+ * Return: length of the urb command.
+ */
+static inline size_t es58x_get_urb_cmd_len(struct es58x_device *es58x_dev,
+					   u16 msg_len)
+{
+	return es58x_dev->param->urb_cmd_header_len + msg_len + sizeof(u16);
+}
+
+/**
+ * es58x_get_netdev() - Get the network device.
+ * @es58x_dev: ES58X device.
+ * @channel_no: The channel number as advertised in the urb command.
+ * @channel_idx_offset: Some of the ES58x starts channel numbering
+ *	from 0 (ES58X FD), others from 1 (ES581.4).
+ * @netdev: CAN network device.
+ *
+ * Do a sanity check on the index provided by the device.
+ *
+ * Return: zero on success, -ECHRNG if the received channel number is
+ *	out of range and -ENODEV if the network device is not yet
+ *	configured.
+ */
+static inline int es58x_get_netdev(struct es58x_device *es58x_dev,
+				   int channel_no, int channel_idx_offset,
+				   struct net_device **netdev)
+{
+	int channel_idx = channel_no - channel_idx_offset;
+
+	*netdev = NULL;
+	if (channel_idx < 0 || channel_idx >= es58x_dev->num_can_ch)
+		return -ECHRNG;
+
+	*netdev = es58x_dev->netdev[channel_idx];
+	if (!*netdev || !netif_device_present(*netdev))
+		return -ENODEV;
+
+	return 0;
+}
+
+/**
+ * es58x_get_raw_can_id() - Get the CAN ID.
+ * @cf: CAN frame.
+ *
+ * Mask the CAN ID in order to only keep the significant bits.
+ *
+ * Return: the raw value of the CAN ID.
+ */
+static inline int es58x_get_raw_can_id(const struct can_frame *cf)
+{
+	if (cf->can_id & CAN_EFF_FLAG)
+		return cf->can_id & CAN_EFF_MASK;
+	else
+		return cf->can_id & CAN_SFF_MASK;
+}
+
+/**
+ * es58x_get_flags() - Get the CAN flags.
+ * @skb: socket buffer of a CAN message.
+ *
+ * Return: the CAN flag as an enum es58x_flag.
+ */
+static inline enum es58x_flag es58x_get_flags(const struct sk_buff *skb)
+{
+	struct canfd_frame *cf = (struct canfd_frame *)skb->data;
+	enum es58x_flag es58x_flags = 0;
+
+	if (cf->can_id & CAN_EFF_FLAG)
+		es58x_flags |= ES58X_FLAG_EFF;
+
+	if (can_is_canfd_skb(skb)) {
+		es58x_flags |= ES58X_FLAG_FD_DATA;
+		if (cf->flags & CANFD_BRS)
+			es58x_flags |= ES58X_FLAG_FD_BRS;
+		if (cf->flags & CANFD_ESI)
+			es58x_flags |= ES58X_FLAG_FD_ESI;
+	} else if (cf->can_id & CAN_RTR_FLAG)
+		/* Remote frames are only defined in Classical CAN frames */
+		es58x_flags |= ES58X_FLAG_RTR;
+
+	return es58x_flags;
+}
+
+/* es58x_core.c. */
+int es58x_can_get_echo_skb(struct net_device *netdev, u32 packet_idx,
+			   u64 *tstamps, unsigned int pkts);
+int es58x_tx_ack_msg(struct net_device *netdev, u16 tx_free_entries,
+		     enum es58x_ret_u32 rx_cmd_ret_u32);
+int es58x_rx_can_msg(struct net_device *netdev, u64 timestamp, const u8 *data,
+		     canid_t can_id, enum es58x_flag es58x_flags, u8 dlc);
+int es58x_rx_err_msg(struct net_device *netdev, enum es58x_err error,
+		     enum es58x_event event, u64 timestamp);
+void es58x_rx_timestamp(struct es58x_device *es58x_dev, u64 timestamp);
+int es58x_rx_cmd_ret_u8(struct device *dev, enum es58x_ret_type cmd_ret_type,
+			enum es58x_ret_u8 rx_cmd_ret_u8);
+int es58x_rx_cmd_ret_u32(struct net_device *netdev,
+			 enum es58x_ret_type cmd_ret_type,
+			 enum es58x_ret_u32 rx_cmd_ret_u32);
+int es58x_send_msg(struct es58x_device *es58x_dev, u8 cmd_type, u8 cmd_id,
+		   const void *msg, u16 cmd_len, int channel_idx);
+
+/* es58x_devlink.c. */
+void es58x_parse_product_info(struct es58x_device *es58x_dev);
+extern const struct devlink_ops es58x_dl_ops;
+
+/* es581_4.c. */
+extern const struct es58x_parameters es581_4_param;
+extern const struct es58x_operators es581_4_ops;
+
+/* es58x_fd.c. */
+extern const struct es58x_parameters es58x_fd_param;
+extern const struct es58x_operators es58x_fd_ops;
+
+#endif /* __ES58X_COMMON_H__ */

linux-7.2.3/drivers/net/can/usb/etas_es58x/es58x_devlink.c

@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* Driver for ETAS GmbH ES58X USB CAN(-FD) Bus Interfaces.
+ *
+ * File es58x_devlink.c: report the product information using devlink.
+ *
+ * Copyright (c) 2022 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
+ */
+
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/usb.h>
+#include <net/devlink.h>
+
+#include "es58x_core.h"
+
+/* USB descriptor index containing the product information string. */
+#define ES58X_PROD_INFO_IDX 6
+
+/**
+ * es58x_parse_sw_version() - Extract boot loader or firmware version.
+ * @es58x_dev: ES58X device.
+ * @prod_info: USB custom string returned by the device.
+ * @prefix: Select which information should be parsed. Set it to "FW"
+ *	to parse the firmware version or to "BL" to parse the
+ *	bootloader version.
+ *
+ * The @prod_info string contains the firmware and the bootloader
+ * version number all prefixed by a magic string and concatenated with
+ * other numbers. Depending on the device, the firmware (bootloader)
+ * format is either "FW_Vxx.xx.xx" ("BL_Vxx.xx.xx") or "FW:xx.xx.xx"
+ * ("BL:xx.xx.xx") where 'x' represents a digit. @prod_info must
+ * contains the common part of those prefixes: "FW" or "BL".
+ *
+ * Parse @prod_info and store the version number in
+ * &es58x_dev.firmware_version or &es58x_dev.bootloader_version
+ * according to @prefix value.
+ *
+ * Return: zero on success, -EINVAL if @prefix contains an invalid
+ *	value and -EBADMSG if @prod_info could not be parsed.
+ */
+static int es58x_parse_sw_version(struct es58x_device *es58x_dev,
+				  const char *prod_info, const char *prefix)
+{
+	struct es58x_sw_version *version;
+	int major, minor, revision;
+
+	if (!strcmp(prefix, "FW"))
+		version = &es58x_dev->firmware_version;
+	else if (!strcmp(prefix, "BL"))
+		version = &es58x_dev->bootloader_version;
+	else
+		return -EINVAL;
+
+	/* Go to prefix */
+	prod_info = strstr(prod_info, prefix);
+	if (!prod_info)
+		return -EBADMSG;
+	/* Go to beginning of the version number */
+	while (!isdigit(*prod_info)) {
+		prod_info++;
+		if (!*prod_info)
+			return -EBADMSG;
+	}
+
+	if (sscanf(prod_info, "%2u.%2u.%2u", &major, &minor, &revision) != 3)
+		return -EBADMSG;
+
+	version->major = major;
+	version->minor = minor;
+	version->revision = revision;
+
+	return 0;
+}
+
+/**
+ * es58x_parse_hw_rev() - Extract hardware revision number.
+ * @es58x_dev: ES58X device.
+ * @prod_info: USB custom string returned by the device.
+ *
+ * @prod_info contains the hardware revision prefixed by a magic
+ * string and conquenated together with other numbers. Depending on
+ * the device, the hardware revision format is either
+ * "HW_VER:axxx/xxx" or "HR:axxx/xxx" where 'a' represents a letter
+ * and 'x' a digit.
+ *
+ * Parse @prod_info and store the hardware revision number in
+ * &es58x_dev.hardware_revision.
+ *
+ * Return: zero on success, -EBADMSG if @prod_info could not be
+ *	parsed.
+ */
+static int es58x_parse_hw_rev(struct es58x_device *es58x_dev,
+			      const char *prod_info)
+{
+	char letter;
+	int major, minor;
+
+	/* The only occurrence of 'H' is in the hardware revision prefix. */
+	prod_info = strchr(prod_info, 'H');
+	if (!prod_info)
+		return -EBADMSG;
+	/* Go to beginning of the hardware revision */
+	prod_info = strchr(prod_info, ':');
+	if (!prod_info)
+		return -EBADMSG;
+	prod_info++;
+
+	if (sscanf(prod_info, "%c%3u/%3u", &letter, &major, &minor) != 3)
+		return -EBADMSG;
+
+	es58x_dev->hardware_revision.letter = letter;
+	es58x_dev->hardware_revision.major = major;
+	es58x_dev->hardware_revision.minor = minor;
+
+	return 0;
+}
+
+/**
+ * es58x_parse_product_info() - Parse the ES58x product information
+ *	string.
+ * @es58x_dev: ES58X device.
+ *
+ * Retrieve the product information string and parse it to extract the
+ * firmware version, the bootloader version and the hardware
+ * revision.
+ *
+ * If the function fails, set the version or revision to an invalid
+ * value and emit an informal message. Continue probing because the
+ * product information is not critical for the driver to operate.
+ */
+void es58x_parse_product_info(struct es58x_device *es58x_dev)
+{
+	static const struct es58x_sw_version sw_version_not_set = {
+		.major = -1,
+		.minor = -1,
+		.revision = -1,
+	};
+	static const struct es58x_hw_revision hw_revision_not_set = {
+		.letter = '\0',
+		.major = -1,
+		.minor = -1,
+	};
+	char *prod_info;
+
+	es58x_dev->firmware_version = sw_version_not_set;
+	es58x_dev->bootloader_version = sw_version_not_set;
+	es58x_dev->hardware_revision = hw_revision_not_set;
+
+	prod_info = usb_cache_string(es58x_dev->udev, ES58X_PROD_INFO_IDX);
+	if (!prod_info) {
+		dev_warn(es58x_dev->dev,
+			 "could not retrieve the product info string\n");
+		return;
+	}
+
+	if (es58x_parse_sw_version(es58x_dev, prod_info, "FW") ||
+	    es58x_parse_sw_version(es58x_dev, prod_info, "BL") ||
+	    es58x_parse_hw_rev(es58x_dev, prod_info))
+		dev_info(es58x_dev->dev,
+			 "could not parse product info: '%s'\n", prod_info);
+
+	kfree(prod_info);
+}
+
+/**
+ * es58x_sw_version_is_valid() - Check if the version is a valid number.
+ * @sw_ver: Version number of either the firmware or the bootloader.
+ *
+ * If any of the software version sub-numbers do not fit on two
+ * digits, the version is invalid, most probably because the product
+ * string could not be parsed.
+ *
+ * Return: @true if the software version is valid, @false otherwise.
+ */
+static inline bool es58x_sw_version_is_valid(struct es58x_sw_version *sw_ver)
+{
+	return sw_ver->major < 100 && sw_ver->minor < 100 &&
+		sw_ver->revision < 100;
+}
+
+/**
+ * es58x_hw_revision_is_valid() - Check if the revision is a valid number.
+ * @hw_rev: Revision number of the hardware.
+ *
+ * If &es58x_hw_revision.letter is not a alphanumeric character or if
+ * any of the hardware revision sub-numbers do not fit on three
+ * digits, the revision is invalid, most probably because the product
+ * string could not be parsed.
+ *
+ * Return: @true if the hardware revision is valid, @false otherwise.
+ */
+static inline bool es58x_hw_revision_is_valid(struct es58x_hw_revision *hw_rev)
+{
+	return isalnum(hw_rev->letter) && hw_rev->major < 1000 &&
+		hw_rev->minor < 1000;
+}
+
+/**
+ * es58x_devlink_info_get() - Report the product information.
+ * @devlink: Devlink.
+ * @req: skb wrapper where to put requested information.
+ * @extack: Unused.
+ *
+ * Report the firmware version, the bootloader version, the hardware
+ * revision and the serial number through netlink.
+ *
+ * Return: zero on success, errno when any error occurs.
+ */
+static int es58x_devlink_info_get(struct devlink *devlink,
+				  struct devlink_info_req *req,
+				  struct netlink_ext_ack *extack)
+{
+	struct es58x_device *es58x_dev = devlink_priv(devlink);
+	struct es58x_sw_version *fw_ver = &es58x_dev->firmware_version;
+	struct es58x_sw_version *bl_ver = &es58x_dev->bootloader_version;
+	struct es58x_hw_revision *hw_rev = &es58x_dev->hardware_revision;
+	char buf[MAX(sizeof("xx.xx.xx"), sizeof("axxx/xxx"))];
+	int ret = 0;
+
+	if (es58x_sw_version_is_valid(fw_ver)) {
+		snprintf(buf, sizeof(buf), "%02u.%02u.%02u",
+			 fw_ver->major, fw_ver->minor, fw_ver->revision);
+		ret = devlink_info_version_running_put(req,
+						       DEVLINK_INFO_VERSION_GENERIC_FW,
+						       buf);
+		if (ret)
+			return ret;
+	}
+
+	if (es58x_sw_version_is_valid(bl_ver)) {
+		snprintf(buf, sizeof(buf), "%02u.%02u.%02u",
+			 bl_ver->major, bl_ver->minor, bl_ver->revision);
+		ret = devlink_info_version_running_put(req,
+						       DEVLINK_INFO_VERSION_GENERIC_FW_BOOTLOADER,
+						       buf);
+		if (ret)
+			return ret;
+	}
+
+	if (es58x_hw_revision_is_valid(hw_rev)) {
+		snprintf(buf, sizeof(buf), "%c%03u/%03u",
+			 hw_rev->letter, hw_rev->major, hw_rev->minor);
+		ret = devlink_info_version_fixed_put(req,
+						     DEVLINK_INFO_VERSION_GENERIC_BOARD_REV,
+						     buf);
+		if (ret)
+			return ret;
+	}
+
+	if (es58x_dev->udev->serial)
+		ret = devlink_info_serial_number_put(req,
+						     es58x_dev->udev->serial);
+
+	return ret;
+}
+
+const struct devlink_ops es58x_dl_ops = {
+	.info_get = es58x_devlink_info_get,
+};

linux-7.2.3/drivers/net/can/usb/etas_es58x/es58x_fd.c

@@ -0,0 +1,565 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* Driver for ETAS GmbH ES58X USB CAN(-FD) Bus Interfaces.
+ *
+ * File es58x_fd.c: Adds support to ETAS ES582.1 and ES584.1 (naming
+ * convention: we use the term "ES58X FD" when referring to those two
+ * variants together).
+ *
+ * Copyright (c) 2019 Robert Bosch Engineering and Business Solutions. All rights reserved.
+ * Copyright (c) 2020 ETAS K.K.. All rights reserved.
+ * Copyright (c) 2020-2022 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
+ */
+
+#include <linux/unaligned.h>
+#include <linux/kernel.h>
+#include <linux/units.h>
+
+#include "es58x_core.h"
+#include "es58x_fd.h"
+
+/**
+ * es58x_fd_sizeof_rx_tx_msg() - Calculate the actual length of the
+ *	structure of a rx or tx message.
+ * @msg: message of variable length, must have a dlc and a len fields.
+ *
+ * Even if RTR frames have actually no payload, the ES58X devices
+ * still expect it. Must be a macro in order to accept several types
+ * (struct es58x_fd_tx_can_msg and struct es58x_fd_rx_can_msg) as an
+ * input.
+ *
+ * Return: length of the message.
+ */
+#define es58x_fd_sizeof_rx_tx_msg(msg)					\
+({									\
+	typeof(msg) __msg = (msg);					\
+	size_t __msg_len;						\
+									\
+	if (__msg.flags & ES58X_FLAG_FD_DATA)				\
+		__msg_len = canfd_sanitize_len(__msg.len);		\
+	else								\
+		__msg_len = can_cc_dlc2len(__msg.dlc);			\
+									\
+	offsetof(typeof(__msg), data[__msg_len]);			\
+})
+
+static enum es58x_fd_cmd_type es58x_fd_cmd_type(struct net_device *netdev)
+{
+	u32 ctrlmode = es58x_priv(netdev)->can.ctrlmode;
+
+	if (ctrlmode & (CAN_CTRLMODE_FD | CAN_CTRLMODE_FD_NON_ISO))
+		return ES58X_FD_CMD_TYPE_CANFD;
+	else
+		return ES58X_FD_CMD_TYPE_CAN;
+}
+
+static u16 es58x_fd_get_msg_len(const union es58x_urb_cmd *urb_cmd)
+{
+	return get_unaligned_le16(&urb_cmd->es58x_fd_urb_cmd.msg_len);
+}
+
+static int es58x_fd_echo_msg(struct net_device *netdev,
+			     const struct es58x_fd_urb_cmd *es58x_fd_urb_cmd)
+{
+	struct es58x_priv *priv = es58x_priv(netdev);
+	const struct es58x_fd_echo_msg *echo_msg;
+	struct es58x_device *es58x_dev = priv->es58x_dev;
+	u64 *tstamps = es58x_dev->timestamps;
+	u16 msg_len = get_unaligned_le16(&es58x_fd_urb_cmd->msg_len);
+	int i, num_element;
+	u32 rcv_packet_idx;
+
+	const u32 mask = GENMASK(BITS_PER_TYPE(mask) - 1,
+				 BITS_PER_TYPE(echo_msg->packet_idx));
+
+	num_element = es58x_msg_num_element(es58x_dev->dev,
+					    es58x_fd_urb_cmd->echo_msg,
+					    msg_len);
+	if (num_element < 0)
+		return num_element;
+	echo_msg = es58x_fd_urb_cmd->echo_msg;
+
+	rcv_packet_idx = (priv->tx_tail & mask) | echo_msg[0].packet_idx;
+	for (i = 0; i < num_element; i++) {
+		if ((u8)rcv_packet_idx != echo_msg[i].packet_idx) {
+			netdev_err(netdev, "Packet idx jumped from %u to %u\n",
+				   (u8)rcv_packet_idx - 1,
+				   echo_msg[i].packet_idx);
+			return -EBADMSG;
+		}
+
+		tstamps[i] = get_unaligned_le64(&echo_msg[i].timestamp);
+		rcv_packet_idx++;
+	}
+
+	return es58x_can_get_echo_skb(netdev, priv->tx_tail, tstamps, num_element);
+}
+
+static int es58x_fd_rx_can_msg(struct net_device *netdev,
+			       const struct es58x_fd_urb_cmd *es58x_fd_urb_cmd)
+{
+	struct es58x_device *es58x_dev = es58x_priv(netdev)->es58x_dev;
+	const u8 *rx_can_msg_buf = es58x_fd_urb_cmd->rx_can_msg_buf;
+	u16 rx_can_msg_buf_len = get_unaligned_le16(&es58x_fd_urb_cmd->msg_len);
+	int pkts, ret;
+
+	ret = es58x_check_msg_max_len(es58x_dev->dev,
+				      es58x_fd_urb_cmd->rx_can_msg_buf,
+				      rx_can_msg_buf_len);
+	if (ret)
+		return ret;
+
+	for (pkts = 0; rx_can_msg_buf_len > 0; pkts++) {
+		const struct es58x_fd_rx_can_msg *rx_can_msg =
+		    (const struct es58x_fd_rx_can_msg *)rx_can_msg_buf;
+		bool is_can_fd = !!(rx_can_msg->flags & ES58X_FLAG_FD_DATA);
+		/* rx_can_msg_len is the length of the rx_can_msg
+		 * buffer. Not to be confused with rx_can_msg->len
+		 * which is the length of the CAN payload
+		 * rx_can_msg->data.
+		 */
+		u16 rx_can_msg_len = es58x_fd_sizeof_rx_tx_msg(*rx_can_msg);
+
+		if (rx_can_msg_len > rx_can_msg_buf_len) {
+			netdev_err(netdev,
+				   "%s: Expected a rx_can_msg of size %d but only %d bytes are left in rx_can_msg_buf\n",
+				   __func__,
+				   rx_can_msg_len, rx_can_msg_buf_len);
+			return -EMSGSIZE;
+		}
+		if (rx_can_msg->len > CANFD_MAX_DLEN) {
+			netdev_err(netdev,
+				   "%s: Data length is %d but maximum should be %d\n",
+				   __func__, rx_can_msg->len, CANFD_MAX_DLEN);
+			return -EMSGSIZE;
+		}
+
+		if (netif_running(netdev)) {
+			u64 tstamp = get_unaligned_le64(&rx_can_msg->timestamp);
+			canid_t can_id = get_unaligned_le32(&rx_can_msg->can_id);
+			u8 dlc;
+
+			if (is_can_fd)
+				dlc = can_fd_len2dlc(rx_can_msg->len);
+			else
+				dlc = rx_can_msg->dlc;
+
+			ret = es58x_rx_can_msg(netdev, tstamp, rx_can_msg->data,
+					       can_id, rx_can_msg->flags, dlc);
+			if (ret)
+				break;
+		}
+
+		rx_can_msg_buf_len -= rx_can_msg_len;
+		rx_can_msg_buf += rx_can_msg_len;
+	}
+
+	if (!netif_running(netdev)) {
+		if (net_ratelimit())
+			netdev_info(netdev,
+				    "%s: %s is down, dropping %d rx packets\n",
+				    __func__, netdev->name, pkts);
+		netdev->stats.rx_dropped += pkts;
+	}
+
+	return ret;
+}
+
+static int es58x_fd_rx_event_msg(struct net_device *netdev,
+				 const struct es58x_fd_urb_cmd *es58x_fd_urb_cmd)
+{
+	struct es58x_device *es58x_dev = es58x_priv(netdev)->es58x_dev;
+	u16 msg_len = get_unaligned_le16(&es58x_fd_urb_cmd->msg_len);
+	const struct es58x_fd_rx_event_msg *rx_event_msg;
+	int ret;
+
+	rx_event_msg = &es58x_fd_urb_cmd->rx_event_msg;
+	ret = es58x_check_msg_len(es58x_dev->dev, *rx_event_msg, msg_len);
+	if (ret)
+		return ret;
+
+	return es58x_rx_err_msg(netdev, rx_event_msg->error_code,
+				rx_event_msg->event_code,
+				get_unaligned_le64(&rx_event_msg->timestamp));
+}
+
+static int es58x_fd_rx_cmd_ret_u32(struct net_device *netdev,
+				   const struct es58x_fd_urb_cmd *es58x_fd_urb_cmd,
+				   enum es58x_ret_type cmd_ret_type)
+{
+	struct es58x_device *es58x_dev = es58x_priv(netdev)->es58x_dev;
+	u16 msg_len = get_unaligned_le16(&es58x_fd_urb_cmd->msg_len);
+	int ret;
+
+	ret = es58x_check_msg_len(es58x_dev->dev,
+				  es58x_fd_urb_cmd->rx_cmd_ret_le32, msg_len);
+	if (ret)
+		return ret;
+
+	return es58x_rx_cmd_ret_u32(netdev, cmd_ret_type,
+				    get_unaligned_le32(&es58x_fd_urb_cmd->rx_cmd_ret_le32));
+}
+
+static int es58x_fd_tx_ack_msg(struct net_device *netdev,
+			       const struct es58x_fd_urb_cmd *es58x_fd_urb_cmd)
+{
+	struct es58x_device *es58x_dev = es58x_priv(netdev)->es58x_dev;
+	const struct es58x_fd_tx_ack_msg *tx_ack_msg;
+	u16 msg_len = get_unaligned_le16(&es58x_fd_urb_cmd->msg_len);
+	int ret;
+
+	tx_ack_msg = &es58x_fd_urb_cmd->tx_ack_msg;
+	ret = es58x_check_msg_len(es58x_dev->dev, *tx_ack_msg, msg_len);
+	if (ret)
+		return ret;
+
+	return es58x_tx_ack_msg(netdev,
+				get_unaligned_le16(&tx_ack_msg->tx_free_entries),
+				get_unaligned_le32(&tx_ack_msg->rx_cmd_ret_le32));
+}
+
+static int es58x_fd_can_cmd_id(struct es58x_device *es58x_dev,
+			       const struct es58x_fd_urb_cmd *es58x_fd_urb_cmd)
+{
+	struct net_device *netdev;
+	int ret;
+
+	ret = es58x_get_netdev(es58x_dev, es58x_fd_urb_cmd->channel_idx,
+			       ES58X_FD_CHANNEL_IDX_OFFSET, &netdev);
+	if (ret)
+		return ret;
+
+	switch ((enum es58x_fd_can_cmd_id)es58x_fd_urb_cmd->cmd_id) {
+	case ES58X_FD_CAN_CMD_ID_ENABLE_CHANNEL:
+		return es58x_fd_rx_cmd_ret_u32(netdev, es58x_fd_urb_cmd,
+					       ES58X_RET_TYPE_ENABLE_CHANNEL);
+
+	case ES58X_FD_CAN_CMD_ID_DISABLE_CHANNEL:
+		return es58x_fd_rx_cmd_ret_u32(netdev, es58x_fd_urb_cmd,
+					       ES58X_RET_TYPE_DISABLE_CHANNEL);
+
+	case ES58X_FD_CAN_CMD_ID_TX_MSG:
+		return es58x_fd_tx_ack_msg(netdev, es58x_fd_urb_cmd);
+
+	case ES58X_FD_CAN_CMD_ID_ECHO_MSG:
+		return es58x_fd_echo_msg(netdev, es58x_fd_urb_cmd);
+
+	case ES58X_FD_CAN_CMD_ID_RX_MSG:
+		return es58x_fd_rx_can_msg(netdev, es58x_fd_urb_cmd);
+
+	case ES58X_FD_CAN_CMD_ID_RESET_RX:
+		return es58x_fd_rx_cmd_ret_u32(netdev, es58x_fd_urb_cmd,
+					       ES58X_RET_TYPE_RESET_RX);
+
+	case ES58X_FD_CAN_CMD_ID_RESET_TX:
+		return es58x_fd_rx_cmd_ret_u32(netdev, es58x_fd_urb_cmd,
+					       ES58X_RET_TYPE_RESET_TX);
+
+	case ES58X_FD_CAN_CMD_ID_ERROR_OR_EVENT_MSG:
+		return es58x_fd_rx_event_msg(netdev, es58x_fd_urb_cmd);
+
+	default:
+		return -EBADRQC;
+	}
+}
+
+static int es58x_fd_device_cmd_id(struct es58x_device *es58x_dev,
+				  const struct es58x_fd_urb_cmd *es58x_fd_urb_cmd)
+{
+	u16 msg_len = get_unaligned_le16(&es58x_fd_urb_cmd->msg_len);
+	int ret;
+
+	switch ((enum es58x_fd_dev_cmd_id)es58x_fd_urb_cmd->cmd_id) {
+	case ES58X_FD_DEV_CMD_ID_TIMESTAMP:
+		ret = es58x_check_msg_len(es58x_dev->dev,
+					  es58x_fd_urb_cmd->timestamp, msg_len);
+		if (ret)
+			return ret;
+		es58x_rx_timestamp(es58x_dev,
+				   get_unaligned_le64(&es58x_fd_urb_cmd->timestamp));
+		return 0;
+
+	default:
+		return -EBADRQC;
+	}
+}
+
+static int es58x_fd_handle_urb_cmd(struct es58x_device *es58x_dev,
+				   const union es58x_urb_cmd *urb_cmd)
+{
+	const struct es58x_fd_urb_cmd *es58x_fd_urb_cmd;
+	int ret;
+
+	es58x_fd_urb_cmd = &urb_cmd->es58x_fd_urb_cmd;
+
+	switch ((enum es58x_fd_cmd_type)es58x_fd_urb_cmd->cmd_type) {
+	case ES58X_FD_CMD_TYPE_CAN:
+	case ES58X_FD_CMD_TYPE_CANFD:
+		ret = es58x_fd_can_cmd_id(es58x_dev, es58x_fd_urb_cmd);
+		break;
+
+	case ES58X_FD_CMD_TYPE_DEVICE:
+		ret = es58x_fd_device_cmd_id(es58x_dev, es58x_fd_urb_cmd);
+		break;
+
+	default:
+		ret = -EBADRQC;
+		break;
+	}
+
+	if (ret == -EBADRQC)
+		dev_err(es58x_dev->dev,
+			"%s: Unknown command type (0x%02X) and command ID (0x%02X) combination\n",
+			__func__, es58x_fd_urb_cmd->cmd_type,
+			es58x_fd_urb_cmd->cmd_id);
+
+	return ret;
+}
+
+static void es58x_fd_fill_urb_header(union es58x_urb_cmd *urb_cmd, u8 cmd_type,
+				     u8 cmd_id, u8 channel_idx, u16 msg_len)
+{
+	struct es58x_fd_urb_cmd *es58x_fd_urb_cmd = &urb_cmd->es58x_fd_urb_cmd;
+
+	es58x_fd_urb_cmd->SOF = cpu_to_le16(es58x_fd_param.tx_start_of_frame);
+	es58x_fd_urb_cmd->cmd_type = cmd_type;
+	es58x_fd_urb_cmd->cmd_id = cmd_id;
+	es58x_fd_urb_cmd->channel_idx = channel_idx;
+	es58x_fd_urb_cmd->msg_len = cpu_to_le16(msg_len);
+}
+
+static int es58x_fd_tx_can_msg(struct es58x_priv *priv,
+			       const struct sk_buff *skb)
+{
+	struct es58x_device *es58x_dev = priv->es58x_dev;
+	union es58x_urb_cmd *urb_cmd = priv->tx_urb->transfer_buffer;
+	struct es58x_fd_urb_cmd *es58x_fd_urb_cmd = &urb_cmd->es58x_fd_urb_cmd;
+	struct can_frame *cf = (struct can_frame *)skb->data;
+	struct es58x_fd_tx_can_msg *tx_can_msg;
+	bool is_fd = can_is_canfd_skb(skb);
+	u16 msg_len;
+	int ret;
+
+	if (priv->tx_can_msg_cnt == 0) {
+		msg_len = 0;
+		es58x_fd_fill_urb_header(urb_cmd,
+					 is_fd ? ES58X_FD_CMD_TYPE_CANFD
+					       : ES58X_FD_CMD_TYPE_CAN,
+					 ES58X_FD_CAN_CMD_ID_TX_MSG_NO_ACK,
+					 priv->channel_idx, msg_len);
+	} else {
+		msg_len = es58x_fd_get_msg_len(urb_cmd);
+	}
+
+	ret = es58x_check_msg_max_len(es58x_dev->dev,
+				      es58x_fd_urb_cmd->tx_can_msg_buf,
+				      msg_len + sizeof(*tx_can_msg));
+	if (ret)
+		return ret;
+
+	/* Fill message contents. */
+	tx_can_msg = (typeof(tx_can_msg))&es58x_fd_urb_cmd->raw_msg[msg_len];
+	tx_can_msg->packet_idx = (u8)priv->tx_head;
+	put_unaligned_le32(es58x_get_raw_can_id(cf), &tx_can_msg->can_id);
+	tx_can_msg->flags = (u8)es58x_get_flags(skb);
+	if (is_fd)
+		tx_can_msg->len = cf->len;
+	else
+		tx_can_msg->dlc = can_get_cc_dlc(cf, priv->can.ctrlmode);
+	memcpy(tx_can_msg->data, cf->data, cf->len);
+
+	/* Calculate new sizes */
+	msg_len += es58x_fd_sizeof_rx_tx_msg(*tx_can_msg);
+	priv->tx_urb->transfer_buffer_length = es58x_get_urb_cmd_len(es58x_dev,
+								     msg_len);
+	put_unaligned_le16(msg_len, &es58x_fd_urb_cmd->msg_len);
+
+	return 0;
+}
+
+static void es58x_fd_convert_bittiming(struct es58x_fd_bittiming *es58x_fd_bt,
+				       struct can_bittiming *bt)
+{
+	/* The actual value set in the hardware registers is one less
+	 * than the functional value.
+	 */
+	const int offset = 1;
+
+	es58x_fd_bt->bitrate = cpu_to_le32(bt->bitrate);
+	es58x_fd_bt->tseg1 =
+	    cpu_to_le16(bt->prop_seg + bt->phase_seg1 - offset);
+	es58x_fd_bt->tseg2 = cpu_to_le16(bt->phase_seg2 - offset);
+	es58x_fd_bt->brp = cpu_to_le16(bt->brp - offset);
+	es58x_fd_bt->sjw = cpu_to_le16(bt->sjw - offset);
+}
+
+static int es58x_fd_enable_channel(struct es58x_priv *priv)
+{
+	struct es58x_device *es58x_dev = priv->es58x_dev;
+	struct net_device *netdev = es58x_dev->netdev[priv->channel_idx];
+	struct es58x_fd_tx_conf_msg tx_conf_msg = { 0 };
+	u32 ctrlmode;
+	size_t conf_len = 0;
+
+	es58x_fd_convert_bittiming(&tx_conf_msg.nominal_bittiming,
+				   &priv->can.bittiming);
+	ctrlmode = priv->can.ctrlmode;
+
+	if (ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+		tx_conf_msg.samples_per_bit = ES58X_SAMPLES_PER_BIT_THREE;
+	else
+		tx_conf_msg.samples_per_bit = ES58X_SAMPLES_PER_BIT_ONE;
+	tx_conf_msg.sync_edge = ES58X_SYNC_EDGE_SINGLE;
+	tx_conf_msg.physical_layer = ES58X_PHYSICAL_LAYER_HIGH_SPEED;
+	tx_conf_msg.echo_mode = ES58X_ECHO_ON;
+	if (ctrlmode & CAN_CTRLMODE_LISTENONLY)
+		tx_conf_msg.ctrlmode |= ES58X_FD_CTRLMODE_PASSIVE;
+	else
+		tx_conf_msg.ctrlmode |=  ES58X_FD_CTRLMODE_ACTIVE;
+
+	if (ctrlmode & CAN_CTRLMODE_FD_NON_ISO) {
+		tx_conf_msg.ctrlmode |= ES58X_FD_CTRLMODE_FD_NON_ISO;
+		tx_conf_msg.canfd_enabled = 1;
+	} else if (ctrlmode & CAN_CTRLMODE_FD) {
+		tx_conf_msg.ctrlmode |= ES58X_FD_CTRLMODE_FD;
+		tx_conf_msg.canfd_enabled = 1;
+	}
+
+	if (tx_conf_msg.canfd_enabled) {
+		es58x_fd_convert_bittiming(&tx_conf_msg.data_bittiming,
+					   &priv->can.fd.data_bittiming);
+
+		if (can_fd_tdc_is_enabled(&priv->can)) {
+			tx_conf_msg.tdc_enabled = 1;
+			tx_conf_msg.tdco = cpu_to_le16(priv->can.fd.tdc.tdco);
+			tx_conf_msg.tdcf = cpu_to_le16(priv->can.fd.tdc.tdcf);
+		}
+
+		conf_len = ES58X_FD_CANFD_CONF_LEN;
+	} else {
+		conf_len = ES58X_FD_CAN_CONF_LEN;
+	}
+
+	return es58x_send_msg(es58x_dev, es58x_fd_cmd_type(netdev),
+			      ES58X_FD_CAN_CMD_ID_ENABLE_CHANNEL,
+			      &tx_conf_msg, conf_len, priv->channel_idx);
+}
+
+static int es58x_fd_disable_channel(struct es58x_priv *priv)
+{
+	/* The type (ES58X_FD_CMD_TYPE_CAN or ES58X_FD_CMD_TYPE_CANFD) does
+	 * not matter here.
+	 */
+	return es58x_send_msg(priv->es58x_dev, ES58X_FD_CMD_TYPE_CAN,
+			      ES58X_FD_CAN_CMD_ID_DISABLE_CHANNEL,
+			      ES58X_EMPTY_MSG, 0, priv->channel_idx);
+}
+
+static int es58x_fd_get_timestamp(struct es58x_device *es58x_dev)
+{
+	return es58x_send_msg(es58x_dev, ES58X_FD_CMD_TYPE_DEVICE,
+			      ES58X_FD_DEV_CMD_ID_TIMESTAMP, ES58X_EMPTY_MSG,
+			      0, ES58X_CHANNEL_IDX_NA);
+}
+
+/* Nominal bittiming constants for ES582.1 and ES584.1 as specified in
+ * the microcontroller datasheet: "SAM E70/S70/V70/V71 Family" section
+ * 49.6.8 "MCAN Nominal Bit Timing and Prescaler Register" from
+ * Microchip.
+ *
+ * The values from the specification are the hardware register
+ * values. To convert them to the functional values, all ranges were
+ * incremented by 1 (e.g. range [0..n-1] changed to [1..n]).
+ */
+static const struct can_bittiming_const es58x_fd_nom_bittiming_const = {
+	.name = "ES582.1/ES584.1",
+	.tseg1_min = 2,
+	.tseg1_max = 256,
+	.tseg2_min = 2,
+	.tseg2_max = 128,
+	.sjw_max = 128,
+	.brp_min = 1,
+	.brp_max = 512,
+	.brp_inc = 1
+};
+
+/* Data bittiming constants for ES582.1 and ES584.1 as specified in
+ * the microcontroller datasheet: "SAM E70/S70/V70/V71 Family" section
+ * 49.6.4 "MCAN Data Bit Timing and Prescaler Register" from
+ * Microchip.
+ */
+static const struct can_bittiming_const es58x_fd_data_bittiming_const = {
+	.name = "ES582.1/ES584.1",
+	.tseg1_min = 2,
+	.tseg1_max = 32,
+	.tseg2_min = 1,
+	.tseg2_max = 16,
+	.sjw_max = 8,
+	.brp_min = 1,
+	.brp_max = 32,
+	.brp_inc = 1
+};
+
+/* Transmission Delay Compensation constants for ES582.1 and ES584.1
+ * as specified in the microcontroller datasheet: "SAM E70/S70/V70/V71
+ * Family" section 49.6.15 "MCAN Transmitter Delay Compensation
+ * Register" from Microchip.
+ */
+static const struct can_tdc_const es58x_tdc_const = {
+	.tdcv_min = 0,
+	.tdcv_max = 0, /* Manual mode not supported. */
+	.tdco_min = 0,
+	.tdco_max = 127,
+	.tdcf_min = 0,
+	.tdcf_max = 127
+};
+
+const struct es58x_parameters es58x_fd_param = {
+	.bittiming_const = &es58x_fd_nom_bittiming_const,
+	.data_bittiming_const = &es58x_fd_data_bittiming_const,
+	.tdc_const = &es58x_tdc_const,
+	/* The devices use NXP TJA1044G transievers which guarantee
+	 * the timing for data rates up to 5 Mbps. Bitrates up to 8
+	 * Mbps work in an optimal environment but are not recommended
+	 * for production environment.
+	 */
+	.bitrate_max = 8 * MEGA /* BPS */,
+	.clock = {.freq = 80 * MEGA /* Hz */},
+	.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY |
+	    CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_FD | CAN_CTRLMODE_FD_NON_ISO |
+	    CAN_CTRLMODE_CC_LEN8_DLC | CAN_CTRLMODE_TDC_AUTO,
+	.tx_start_of_frame = 0xCEFA,	/* FACE in little endian */
+	.rx_start_of_frame = 0xFECA,	/* CAFE in little endian */
+	.tx_urb_cmd_max_len = ES58X_FD_TX_URB_CMD_MAX_LEN,
+	.rx_urb_cmd_max_len = ES58X_FD_RX_URB_CMD_MAX_LEN,
+	/* Size of internal device TX queue is 500.
+	 *
+	 * However, when reaching value around 278, the device's busy
+	 * LED turns on and thus maximum value of 500 is never reached
+	 * in practice. Also, when this value is too high, some error
+	 * on the echo_msg were witnessed when the device is
+	 * recovering from bus off.
+	 *
+	 * For above reasons, a value that would prevent the device
+	 * from becoming busy was chosen. In practice, BQL would
+	 * prevent the value from even getting closer to below
+	 * maximum, so no impact on performance was measured.
+	 */
+	.fifo_mask = 255, /* echo_skb_max = 256 */
+	.dql_min_limit = CAN_FRAME_LEN_MAX * 15, /* Empirical value. */
+	.tx_bulk_max = ES58X_FD_TX_BULK_MAX,
+	.urb_cmd_header_len = ES58X_FD_URB_CMD_HEADER_LEN,
+	.rx_urb_max = ES58X_RX_URBS_MAX,
+	.tx_urb_max = ES58X_TX_URBS_MAX
+};
+
+const struct es58x_operators es58x_fd_ops = {
+	.get_msg_len = es58x_fd_get_msg_len,
+	.handle_urb_cmd = es58x_fd_handle_urb_cmd,
+	.fill_urb_header = es58x_fd_fill_urb_header,
+	.tx_can_msg = es58x_fd_tx_can_msg,
+	.enable_channel = es58x_fd_enable_channel,
+	.disable_channel = es58x_fd_disable_channel,
+	.reset_device = NULL, /* Not implemented in the device firmware. */
+	.get_timestamp = es58x_fd_get_timestamp
+};

linux-7.2.3/drivers/net/can/usb/etas_es58x/es58x_fd.h

@@ -0,0 +1,234 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* Driver for ETAS GmbH ES58X USB CAN(-FD) Bus Interfaces.
+ *
+ * File es58x_fd.h: Definitions and declarations specific to ETAS
+ * ES582.1 and ES584.1 (naming convention: we use the term "ES58X FD"
+ * when referring to those two variants together).
+ *
+ * Copyright (c) 2019 Robert Bosch Engineering and Business Solutions. All rights reserved.
+ * Copyright (c) 2020 ETAS K.K.. All rights reserved.
+ * Copyright (c) 2020, 2021 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
+ */
+
+#ifndef __ES58X_FD_H__
+#define __ES58X_FD_H__
+
+#include <linux/types.h>
+
+#define ES582_1_NUM_CAN_CH 2
+#define ES584_1_NUM_CAN_CH 1
+#define ES58X_FD_NUM_CAN_CH 2
+#define ES58X_FD_CHANNEL_IDX_OFFSET 0
+
+#define ES58X_FD_TX_BULK_MAX 100
+#define ES58X_FD_RX_BULK_MAX 100
+#define ES58X_FD_ECHO_BULK_MAX 100
+
+enum es58x_fd_cmd_type {
+	ES58X_FD_CMD_TYPE_CAN = 0x03,
+	ES58X_FD_CMD_TYPE_CANFD = 0x04,
+	ES58X_FD_CMD_TYPE_DEVICE = 0xFF
+};
+
+/* Command IDs for ES58X_FD_CMD_TYPE_{CAN,CANFD}. */
+enum es58x_fd_can_cmd_id {
+	ES58X_FD_CAN_CMD_ID_ENABLE_CHANNEL = 0x01,
+	ES58X_FD_CAN_CMD_ID_DISABLE_CHANNEL = 0x02,
+	ES58X_FD_CAN_CMD_ID_TX_MSG = 0x05,
+	ES58X_FD_CAN_CMD_ID_ECHO_MSG = 0x07,
+	ES58X_FD_CAN_CMD_ID_RX_MSG = 0x10,
+	ES58X_FD_CAN_CMD_ID_ERROR_OR_EVENT_MSG = 0x11,
+	ES58X_FD_CAN_CMD_ID_RESET_RX = 0x20,
+	ES58X_FD_CAN_CMD_ID_RESET_TX = 0x21,
+	ES58X_FD_CAN_CMD_ID_TX_MSG_NO_ACK = 0x55
+};
+
+/* Command IDs for ES58X_FD_CMD_TYPE_DEVICE. */
+enum es58x_fd_dev_cmd_id {
+	ES58X_FD_DEV_CMD_ID_GETTIMETICKS = 0x01,
+	ES58X_FD_DEV_CMD_ID_TIMESTAMP = 0x02
+};
+
+/**
+ * enum es58x_fd_ctrlmode - Controller mode.
+ * @ES58X_FD_CTRLMODE_ACTIVE: send and receive messages.
+ * @ES58X_FD_CTRLMODE_PASSIVE: only receive messages (monitor). Do not
+ *	send anything, not even the acknowledgment bit.
+ * @ES58X_FD_CTRLMODE_FD: CAN FD according to ISO11898-1.
+ * @ES58X_FD_CTRLMODE_FD_NON_ISO: follow Bosch CAN FD Specification
+ *	V1.0
+ * @ES58X_FD_CTRLMODE_DISABLE_PROTOCOL_EXCEPTION_HANDLING: How to
+ *	behave when CAN FD reserved bit is monitored as
+ *	dominant. (c.f. ISO 11898-1:2015, section 10.4.2.4 "Control
+ *	field", paragraph "r0 bit"). 0 (not disable = enable): send
+ *	error frame. 1 (disable): goes into bus integration mode
+ *	(c.f. below).
+ * @ES58X_FD_CTRLMODE_EDGE_FILTER_DURING_BUS_INTEGRATION: 0: Edge
+ *	filtering is disabled. 1: Edge filtering is enabled. Two
+ *	consecutive dominant bits required to detect an edge for hard
+ *	synchronization.
+ */
+enum es58x_fd_ctrlmode {
+	ES58X_FD_CTRLMODE_ACTIVE = 0,
+	ES58X_FD_CTRLMODE_PASSIVE = BIT(0),
+	ES58X_FD_CTRLMODE_FD = BIT(4),
+	ES58X_FD_CTRLMODE_FD_NON_ISO = BIT(5),
+	ES58X_FD_CTRLMODE_DISABLE_PROTOCOL_EXCEPTION_HANDLING = BIT(6),
+	ES58X_FD_CTRLMODE_EDGE_FILTER_DURING_BUS_INTEGRATION = BIT(7)
+};
+
+struct es58x_fd_bittiming {
+	__le32 bitrate;
+	__le16 tseg1;		/* range: [tseg1_min-1..tseg1_max-1] */
+	__le16 tseg2;		/* range: [tseg2_min-1..tseg2_max-1] */
+	__le16 brp;		/* range: [brp_min-1..brp_max-1] */
+	__le16 sjw;		/* range: [0..sjw_max-1] */
+} __packed;
+
+/**
+ * struct es58x_fd_tx_conf_msg - Channel configuration.
+ * @nominal_bittiming: Nominal bittiming.
+ * @samples_per_bit: type enum es58x_samples_per_bit.
+ * @sync_edge: type enum es58x_sync_edge.
+ * @physical_layer: type enum es58x_physical_layer.
+ * @echo_mode: type enum es58x_echo_mode.
+ * @ctrlmode: type enum es58x_fd_ctrlmode.
+ * @canfd_enabled: boolean (0: Classical CAN, 1: CAN and/or CANFD).
+ * @data_bittiming: Bittiming for flexible data-rate transmission.
+ * @tdc_enabled: Transmitter Delay Compensation switch (0: TDC is
+ *	disabled, 1: TDC is enabled).
+ * @tdco: Transmitter Delay Compensation Offset.
+ * @tdcf: Transmitter Delay Compensation Filter window.
+ *
+ * Please refer to the microcontroller datasheet: "SAM E70/S70/V70/V71
+ * Family" section 49 "Controller Area Network (MCAN)" for additional
+ * information.
+ */
+struct es58x_fd_tx_conf_msg {
+	struct es58x_fd_bittiming nominal_bittiming;
+	u8 samples_per_bit;
+	u8 sync_edge;
+	u8 physical_layer;
+	u8 echo_mode;
+	u8 ctrlmode;
+	u8 canfd_enabled;
+	struct es58x_fd_bittiming data_bittiming;
+	u8 tdc_enabled;
+	__le16 tdco;
+	__le16 tdcf;
+} __packed;
+
+#define ES58X_FD_CAN_CONF_LEN					\
+	(offsetof(struct es58x_fd_tx_conf_msg, canfd_enabled))
+#define ES58X_FD_CANFD_CONF_LEN (sizeof(struct es58x_fd_tx_conf_msg))
+
+struct es58x_fd_tx_can_msg {
+	u8 packet_idx;
+	__le32 can_id;
+	u8 flags;
+	union {
+		u8 dlc;		/* Only if cmd_id is ES58X_FD_CMD_TYPE_CAN */
+		u8 len;		/* Only if cmd_id is ES58X_FD_CMD_TYPE_CANFD */
+	} __packed;
+	u8 data[CANFD_MAX_DLEN];
+} __packed;
+
+#define ES58X_FD_CAN_TX_LEN						\
+	(offsetof(struct es58x_fd_tx_can_msg, data[CAN_MAX_DLEN]))
+#define ES58X_FD_CANFD_TX_LEN (sizeof(struct es58x_fd_tx_can_msg))
+
+struct es58x_fd_rx_can_msg {
+	__le64 timestamp;
+	__le32 can_id;
+	u8 flags;
+	union {
+		u8 dlc;		/* Only if cmd_id is ES58X_FD_CMD_TYPE_CAN */
+		u8 len;		/* Only if cmd_id is ES58X_FD_CMD_TYPE_CANFD */
+	} __packed;
+	u8 data[CANFD_MAX_DLEN];
+} __packed;
+
+#define ES58X_FD_CAN_RX_LEN						\
+	(offsetof(struct es58x_fd_rx_can_msg, data[CAN_MAX_DLEN]))
+#define ES58X_FD_CANFD_RX_LEN (sizeof(struct es58x_fd_rx_can_msg))
+
+struct es58x_fd_echo_msg {
+	__le64 timestamp;
+	u8 packet_idx;
+} __packed;
+
+struct es58x_fd_rx_event_msg {
+	__le64 timestamp;
+	__le32 can_id;
+	u8 flags;		/* type enum es58x_flag */
+	u8 error_type;		/* 0: event, 1: error */
+	u8 error_code;
+	u8 event_code;
+} __packed;
+
+struct es58x_fd_tx_ack_msg {
+	__le32 rx_cmd_ret_le32;	/* type enum es58x_cmd_ret_code_u32 */
+	__le16 tx_free_entries;	/* Number of remaining free entries in the device TX queue */
+} __packed;
+
+/**
+ * struct es58x_fd_urb_cmd - Commands received from or sent to the
+ *	ES58X FD device.
+ * @SOF: Start of Frame.
+ * @cmd_type: Command Type (type: enum es58x_fd_cmd_type). The CRC
+ *	calculation starts at this position.
+ * @cmd_id: Command ID (type: enum es58x_fd_cmd_id).
+ * @channel_idx: Channel index starting at 0.
+ * @msg_len: Length of the message, excluding CRC (i.e. length of the
+ *	union).
+ * @tx_conf_msg: Channel configuration.
+ * @tx_can_msg_buf: Concatenation of Tx messages. Type is "u8[]"
+ *	instead of "struct es58x_fd_tx_msg[]" because the structure
+ *	has a flexible size.
+ * @rx_can_msg_buf: Concatenation Rx messages. Type is "u8[]" instead
+ *	of "struct es58x_fd_rx_msg[]" because the structure has a
+ *	flexible size.
+ * @echo_msg: Array of echo messages (e.g. Tx messages being looped
+ *	back).
+ * @rx_event_msg: Error or event message.
+ * @tx_ack_msg: Tx acknowledgment message.
+ * @timestamp: Timestamp reply.
+ * @rx_cmd_ret_le32: Rx 32 bits return code (type: enum
+ *	es58x_cmd_ret_code_u32).
+ * @raw_msg: Message raw payload.
+ * @reserved_for_crc16_do_not_use: The structure ends with a
+ *	CRC16. Because the structures in above union are of variable
+ *	lengths, we can not predict the offset of the CRC in
+ *	advance. Use functions es58x_get_crc() and es58x_set_crc() to
+ *	manipulate it.
+ */
+struct es58x_fd_urb_cmd {
+	__le16 SOF;
+	u8 cmd_type;
+	u8 cmd_id;
+	u8 channel_idx;
+	__le16 msg_len;
+
+	union {
+		struct es58x_fd_tx_conf_msg tx_conf_msg;
+		u8 tx_can_msg_buf[ES58X_FD_TX_BULK_MAX * ES58X_FD_CANFD_TX_LEN];
+		u8 rx_can_msg_buf[ES58X_FD_RX_BULK_MAX * ES58X_FD_CANFD_RX_LEN];
+		struct es58x_fd_echo_msg echo_msg[ES58X_FD_ECHO_BULK_MAX];
+		struct es58x_fd_rx_event_msg rx_event_msg;
+		struct es58x_fd_tx_ack_msg tx_ack_msg;
+		__le64 timestamp;
+		__le32 rx_cmd_ret_le32;
+		DECLARE_FLEX_ARRAY(u8, raw_msg);
+	} __packed;
+
+	__le16 reserved_for_crc16_do_not_use;
+} __packed;
+
+#define ES58X_FD_URB_CMD_HEADER_LEN (offsetof(struct es58x_fd_urb_cmd, raw_msg))
+#define ES58X_FD_TX_URB_CMD_MAX_LEN					\
+	ES58X_SIZEOF_URB_CMD(struct es58x_fd_urb_cmd, tx_can_msg_buf)
+#define ES58X_FD_RX_URB_CMD_MAX_LEN					\
+	ES58X_SIZEOF_URB_CMD(struct es58x_fd_urb_cmd, rx_can_msg_buf)
+
+#endif /* __ES58X_FD_H__ */

linux-7.2.3/drivers/net/can/usb/kvaser_usb/Makefile

@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb.o
+kvaser_usb-y = kvaser_usb_core.o kvaser_usb_devlink.o kvaser_usb_leaf.o kvaser_usb_hydra.o

linux-7.2.3/drivers/net/can/usb/kvaser_usb/kvaser_usb.h

@@ -0,0 +1,272 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Parts of this driver are based on the following:
+ *  - Kvaser linux leaf driver (version 4.78)
+ *  - CAN driver for esd CAN-USB/2
+ *  - Kvaser linux usbcanII driver (version 5.3)
+ *  - Kvaser linux mhydra driver (version 5.24)
+ *
+ * Copyright (C) 2002-2018 KVASER AB, Sweden. All rights reserved.
+ * Copyright (C) 2010 Matthias Fuchs <matthias.fuchs@esd.eu>, esd gmbh
+ * Copyright (C) 2012 Olivier Sobrie <olivier@sobrie.be>
+ * Copyright (C) 2015 Valeo S.A.
+ */
+
+#ifndef KVASER_USB_H
+#define KVASER_USB_H
+
+/* Kvaser USB CAN dongles are divided into three major platforms:
+ * - Hydra: Running firmware labeled as 'mhydra'
+ * - Leaf: Based on Renesas M32C or Freescale i.MX28, running firmware labeled
+ *         as 'filo'
+ * - UsbcanII: Based on Renesas M16C, running firmware labeled as 'helios'
+ */
+
+#include <linux/completion.h>
+#include <linux/ktime.h>
+#include <linux/math64.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <net/devlink.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+
+#define KVASER_USB_MAX_RX_URBS			4
+#define KVASER_USB_MAX_TX_URBS			128
+#define KVASER_USB_TIMEOUT			1000 /* msecs */
+#define KVASER_USB_RX_BUFFER_SIZE		3072
+#define KVASER_USB_MAX_NET_DEVICES		5
+
+/* Kvaser USB device quirks */
+#define KVASER_USB_QUIRK_HAS_SILENT_MODE	BIT(0)
+#define KVASER_USB_QUIRK_HAS_TXRX_ERRORS	BIT(1)
+#define KVASER_USB_QUIRK_IGNORE_CLK_FREQ	BIT(2)
+
+/* Device capabilities */
+#define KVASER_USB_CAP_BERR_CAP			0x01
+#define KVASER_USB_CAP_EXT_CAP			0x02
+#define KVASER_USB_HYDRA_CAP_EXT_CMD		0x04
+
+#define KVASER_USB_SW_VERSION_MAJOR_MASK GENMASK(31, 24)
+#define KVASER_USB_SW_VERSION_MINOR_MASK GENMASK(23, 16)
+#define KVASER_USB_SW_VERSION_BUILD_MASK GENMASK(15, 0)
+
+struct kvaser_usb_dev_cfg;
+
+enum kvaser_usb_leaf_family {
+	KVASER_LEAF,
+	KVASER_USBCAN,
+};
+
+enum kvaser_usb_led_state {
+	KVASER_USB_LED_ON = 0,
+	KVASER_USB_LED_OFF = 1,
+};
+
+#define KVASER_USB_HYDRA_MAX_CMD_LEN		128
+struct kvaser_usb_dev_card_data_hydra {
+	u8 channel_to_he[KVASER_USB_MAX_NET_DEVICES];
+	u8 sysdbg_he;
+	spinlock_t transid_lock; /* lock for transid */
+	u16 transid;
+	/* lock for usb_rx_leftover and usb_rx_leftover_len */
+	spinlock_t usb_rx_leftover_lock;
+	u8 usb_rx_leftover[KVASER_USB_HYDRA_MAX_CMD_LEN];
+	u8 usb_rx_leftover_len;
+};
+struct kvaser_usb_dev_card_data {
+	u32 ctrlmode_supported;
+	u32 capabilities;
+	struct kvaser_usb_dev_card_data_hydra hydra;
+	u32 usbcan_timestamp_msb;
+};
+
+/* Context for an outstanding, not yet ACKed, transmission */
+struct kvaser_usb_tx_urb_context {
+	struct kvaser_usb_net_priv *priv;
+	u32 echo_index;
+};
+
+struct kvaser_usb_fw_version {
+	u8 major;
+	u8 minor;
+	u16 build;
+};
+
+struct kvaser_usb_busparams {
+	__le32 bitrate;
+	u8 tseg1;
+	u8 tseg2;
+	u8 sjw;
+	u8 nsamples;
+} __packed;
+
+struct kvaser_usb {
+	struct usb_device *udev;
+	struct usb_interface *intf;
+	struct kvaser_usb_net_priv *nets[KVASER_USB_MAX_NET_DEVICES];
+	const struct kvaser_usb_driver_info *driver_info;
+	const struct kvaser_usb_dev_cfg *cfg;
+
+	struct usb_endpoint_descriptor *bulk_in, *bulk_out;
+	struct usb_anchor rx_submitted;
+
+	u32 ean[2];
+	u32 serial_number;
+	struct kvaser_usb_fw_version fw_version;
+	u8 hw_revision;
+	unsigned int nchannels;
+	/* @max_tx_urbs: Firmware-reported maximum number of outstanding,
+	 * not yet ACKed, transmissions on this device. This value is
+	 * also used as a sentinel for marking free tx contexts.
+	 */
+	unsigned int max_tx_urbs;
+	struct kvaser_usb_dev_card_data card_data;
+
+	bool rxinitdone;
+	void *rxbuf[KVASER_USB_MAX_RX_URBS];
+	dma_addr_t rxbuf_dma[KVASER_USB_MAX_RX_URBS];
+};
+
+struct kvaser_usb_net_priv {
+	struct can_priv can;
+	struct devlink_port devlink_port;
+	struct can_berr_counter bec;
+
+	/* subdriver-specific data */
+	void *sub_priv;
+
+	struct kvaser_usb *dev;
+	struct net_device *netdev;
+	int channel;
+
+	struct completion start_comp, stop_comp, flush_comp,
+			  get_busparams_comp;
+	struct usb_anchor tx_submitted;
+
+	struct kvaser_usb_busparams busparams_nominal, busparams_data;
+
+	spinlock_t tx_contexts_lock; /* lock for active_tx_contexts */
+	int active_tx_contexts;
+	struct kvaser_usb_tx_urb_context tx_contexts[];
+};
+
+/**
+ * struct kvaser_usb_dev_ops - Device specific functions
+ * @dev_set_mode:		used for can.do_set_mode
+ * @dev_set_bittiming:		used for can.do_set_bittiming
+ * @dev_get_busparams:		readback arbitration busparams
+ * @dev_set_data_bittiming:	used for can.fd.do_set_data_bittiming
+ * @dev_get_data_busparams:	readback data busparams
+ * @dev_get_berr_counter:	used for can.do_get_berr_counter
+ *
+ * @dev_setup_endpoints:	setup USB in and out endpoints
+ * @dev_init_card:		initialize card
+ * @dev_init_channel:		initialize channel
+ * @dev_remove_channel:		uninitialize channel
+ * @dev_get_software_info:	get software info
+ * @dev_get_software_details:	get software details
+ * @dev_get_card_info:		get card info
+ * @dev_get_capabilities:	discover device capabilities
+ * @dev_set_led:		turn on/off device LED
+ *
+ * @dev_set_opt_mode:		set ctrlmod
+ * @dev_start_chip:		start the CAN controller
+ * @dev_stop_chip:		stop the CAN controller
+ * @dev_reset_chip:		reset the CAN controller
+ * @dev_flush_queue:		flush outstanding CAN messages
+ * @dev_read_bulk_callback:	handle incoming commands
+ * @dev_frame_to_cmd:		translate struct can_frame into device command
+ */
+struct kvaser_usb_dev_ops {
+	int (*dev_set_mode)(struct net_device *netdev, enum can_mode mode);
+	int (*dev_set_bittiming)(const struct net_device *netdev,
+				 const struct kvaser_usb_busparams *busparams);
+	int (*dev_get_busparams)(struct kvaser_usb_net_priv *priv);
+	int (*dev_set_data_bittiming)(const struct net_device *netdev,
+				      const struct kvaser_usb_busparams *busparams);
+	int (*dev_get_data_busparams)(struct kvaser_usb_net_priv *priv);
+	int (*dev_get_berr_counter)(const struct net_device *netdev,
+				    struct can_berr_counter *bec);
+	int (*dev_setup_endpoints)(struct kvaser_usb *dev);
+	int (*dev_init_card)(struct kvaser_usb *dev);
+	int (*dev_init_channel)(struct kvaser_usb_net_priv *priv);
+	void (*dev_remove_channel)(struct kvaser_usb_net_priv *priv);
+	int (*dev_get_software_info)(struct kvaser_usb *dev);
+	int (*dev_get_software_details)(struct kvaser_usb *dev);
+	int (*dev_get_card_info)(struct kvaser_usb *dev);
+	int (*dev_get_capabilities)(struct kvaser_usb *dev);
+	int (*dev_set_led)(struct kvaser_usb_net_priv *priv,
+			   enum kvaser_usb_led_state state,
+			   u16 duration_ms);
+	int (*dev_set_opt_mode)(const struct kvaser_usb_net_priv *priv);
+	int (*dev_start_chip)(struct kvaser_usb_net_priv *priv);
+	int (*dev_stop_chip)(struct kvaser_usb_net_priv *priv);
+	int (*dev_reset_chip)(struct kvaser_usb *dev, int channel);
+	int (*dev_flush_queue)(struct kvaser_usb_net_priv *priv);
+	void (*dev_read_bulk_callback)(struct kvaser_usb *dev, void *buf,
+				       int len);
+	void *(*dev_frame_to_cmd)(const struct kvaser_usb_net_priv *priv,
+				  const struct sk_buff *skb, int *cmd_len,
+				  u16 transid);
+};
+
+struct kvaser_usb_driver_info {
+	u32 quirks;
+	enum kvaser_usb_leaf_family family;
+	const struct kvaser_usb_dev_ops *ops;
+};
+
+struct kvaser_usb_dev_cfg {
+	const struct can_clock clock;
+	const unsigned int timestamp_freq;
+	const struct can_bittiming_const * const bittiming_const;
+	const struct can_bittiming_const * const data_bittiming_const;
+};
+
+extern const struct kvaser_usb_dev_ops kvaser_usb_hydra_dev_ops;
+extern const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops;
+
+extern const struct devlink_ops kvaser_usb_devlink_ops;
+
+int kvaser_usb_devlink_port_register(struct kvaser_usb_net_priv *priv);
+void kvaser_usb_devlink_port_unregister(struct kvaser_usb_net_priv *priv);
+
+void kvaser_usb_unlink_tx_urbs(struct kvaser_usb_net_priv *priv);
+
+int kvaser_usb_recv_cmd(const struct kvaser_usb *dev, void *cmd, int len,
+			int *actual_len);
+
+int kvaser_usb_send_cmd(const struct kvaser_usb *dev, void *cmd, int len);
+
+int kvaser_usb_send_cmd_async(struct kvaser_usb_net_priv *priv, void *cmd,
+			      int len);
+
+int kvaser_usb_can_rx_over_error(struct net_device *netdev);
+
+extern const struct can_bittiming_const kvaser_usb_flexc_bittiming_const;
+
+static inline ktime_t kvaser_usb_ticks_to_ktime(const struct kvaser_usb_dev_cfg *cfg,
+						u64 ticks)
+{
+	return ns_to_ktime(div_u64(ticks * 1000, cfg->timestamp_freq));
+}
+
+static inline ktime_t kvaser_usb_timestamp48_to_ktime(const struct kvaser_usb_dev_cfg *cfg,
+						      const __le16 *timestamp)
+{
+	u64 ticks = le16_to_cpu(timestamp[0]) |
+		    (u64)(le16_to_cpu(timestamp[1])) << 16 |
+		    (u64)(le16_to_cpu(timestamp[2])) << 32;
+
+	return kvaser_usb_ticks_to_ktime(cfg, ticks);
+}
+
+static inline ktime_t kvaser_usb_timestamp64_to_ktime(const struct kvaser_usb_dev_cfg *cfg,
+						      __le64 timestamp)
+{
+	return kvaser_usb_ticks_to_ktime(cfg, le64_to_cpu(timestamp));
+}
+
+#endif /* KVASER_USB_H */

linux-7.2.3/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c

@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/* kvaser_usb devlink functions
+ *
+ * Copyright (C) 2025 KVASER AB, Sweden. All rights reserved.
+ */
+#include "kvaser_usb.h"
+
+#include <linux/netdevice.h>
+#include <net/devlink.h>
+
+#define KVASER_USB_EAN_MSB 0x00073301
+
+static int kvaser_usb_devlink_info_get(struct devlink *devlink,
+				       struct devlink_info_req *req,
+				       struct netlink_ext_ack *extack)
+{
+	struct kvaser_usb *dev = devlink_priv(devlink);
+	char buf[] = "73301XXXXXXXXXX";
+	int ret;
+
+	if (dev->serial_number) {
+		snprintf(buf, sizeof(buf), "%u", dev->serial_number);
+		ret = devlink_info_serial_number_put(req, buf);
+		if (ret)
+			return ret;
+	}
+
+	if (dev->fw_version.major) {
+		snprintf(buf, sizeof(buf), "%u.%u.%u",
+			 dev->fw_version.major,
+			 dev->fw_version.minor,
+			 dev->fw_version.build);
+		ret = devlink_info_version_running_put(req,
+						       DEVLINK_INFO_VERSION_GENERIC_FW,
+						       buf);
+		if (ret)
+			return ret;
+	}
+
+	if (dev->hw_revision) {
+		snprintf(buf, sizeof(buf), "%u", dev->hw_revision);
+		ret = devlink_info_version_fixed_put(req,
+						     DEVLINK_INFO_VERSION_GENERIC_BOARD_REV,
+						     buf);
+		if (ret)
+			return ret;
+	}
+
+	if (dev->ean[1] == KVASER_USB_EAN_MSB) {
+		snprintf(buf, sizeof(buf), "%x%08x", dev->ean[1], dev->ean[0]);
+		ret = devlink_info_version_fixed_put(req,
+						     DEVLINK_INFO_VERSION_GENERIC_BOARD_ID,
+						     buf);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+const struct devlink_ops kvaser_usb_devlink_ops = {
+	.info_get = kvaser_usb_devlink_info_get,
+};
+
+int kvaser_usb_devlink_port_register(struct kvaser_usb_net_priv *priv)
+{
+	int ret;
+	struct devlink_port_attrs attrs = {
+		.flavour = DEVLINK_PORT_FLAVOUR_PHYSICAL,
+		.phys.port_number = priv->channel,
+	};
+	devlink_port_attrs_set(&priv->devlink_port, &attrs);
+
+	ret = devlink_port_register(priv_to_devlink(priv->dev),
+				    &priv->devlink_port, priv->channel);
+	if (ret)
+		return ret;
+
+	SET_NETDEV_DEVLINK_PORT(priv->netdev, &priv->devlink_port);
+
+	return 0;
+}
+
+void kvaser_usb_devlink_port_unregister(struct kvaser_usb_net_priv *priv)
+{
+	devlink_port_unregister(&priv->devlink_port);
+}

linux-7.2.3/drivers/net/can/usb/mcba_usb.c

@@ -0,0 +1,919 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* SocketCAN driver for Microchip CAN BUS Analyzer Tool
+ *
+ * Copyright (C) 2017 Mobica Limited
+ *
+ * This driver is inspired by the 4.6.2 version of net/can/usb/usb_8dev.c
+ */
+
+#include <linux/unaligned.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+#include <linux/ethtool.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+/* vendor and product id */
+#define MCBA_MODULE_NAME "mcba_usb"
+#define MCBA_VENDOR_ID 0x04d8
+#define MCBA_PRODUCT_ID 0x0a30
+
+/* driver constants */
+#define MCBA_MAX_RX_URBS 20
+#define MCBA_MAX_TX_URBS 20
+#define MCBA_CTX_FREE MCBA_MAX_TX_URBS
+
+/* RX buffer must be bigger than msg size since at the
+ * beginning USB messages are stacked.
+ */
+#define MCBA_USB_RX_BUFF_SIZE 64
+#define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg))
+
+/* Microchip command id */
+#define MBCA_CMD_RECEIVE_MESSAGE 0xE3
+#define MBCA_CMD_I_AM_ALIVE_FROM_CAN 0xF5
+#define MBCA_CMD_I_AM_ALIVE_FROM_USB 0xF7
+#define MBCA_CMD_CHANGE_BIT_RATE 0xA1
+#define MBCA_CMD_TRANSMIT_MESSAGE_EV 0xA3
+#define MBCA_CMD_SETUP_TERMINATION_RESISTANCE 0xA8
+#define MBCA_CMD_READ_FW_VERSION 0xA9
+#define MBCA_CMD_NOTHING_TO_SEND 0xFF
+#define MBCA_CMD_TRANSMIT_MESSAGE_RSP 0xE2
+
+#define MCBA_VER_REQ_USB 1
+#define MCBA_VER_REQ_CAN 2
+
+/* Drive the CAN_RES signal LOW "0" to activate R24 and R25 */
+#define MCBA_VER_TERMINATION_ON 0
+#define MCBA_VER_TERMINATION_OFF 1
+
+#define MCBA_SIDL_EXID_MASK 0x8
+#define MCBA_DLC_MASK 0xf
+#define MCBA_DLC_RTR_MASK 0x40
+
+#define MCBA_CAN_STATE_WRN_TH 95
+#define MCBA_CAN_STATE_ERR_PSV_TH 127
+
+#define MCBA_TERMINATION_DISABLED CAN_TERMINATION_DISABLED
+#define MCBA_TERMINATION_ENABLED 120
+
+struct mcba_usb_ctx {
+	struct mcba_priv *priv;
+	u32 ndx;
+	bool can;
+};
+
+/* Structure to hold all of our device specific stuff */
+struct mcba_priv {
+	struct can_priv can; /* must be the first member */
+	struct sk_buff *echo_skb[MCBA_MAX_TX_URBS];
+	struct mcba_usb_ctx tx_context[MCBA_MAX_TX_URBS];
+	struct usb_device *udev;
+	struct net_device *netdev;
+	struct usb_anchor tx_submitted;
+	struct usb_anchor rx_submitted;
+	struct can_berr_counter bec;
+	bool usb_ka_first_pass;
+	bool can_ka_first_pass;
+	bool can_speed_check;
+	atomic_t free_ctx_cnt;
+	void *rxbuf[MCBA_MAX_RX_URBS];
+	dma_addr_t rxbuf_dma[MCBA_MAX_RX_URBS];
+	int rx_pipe;
+	int tx_pipe;
+};
+
+/* CAN frame */
+struct __packed mcba_usb_msg_can {
+	u8 cmd_id;
+	__be16 eid;
+	__be16 sid;
+	u8 dlc;
+	u8 data[8];
+	u8 timestamp[4];
+	u8 checksum;
+};
+
+/* command frame */
+struct __packed mcba_usb_msg {
+	u8 cmd_id;
+	u8 unused[18];
+};
+
+struct __packed mcba_usb_msg_ka_usb {
+	u8 cmd_id;
+	u8 termination_state;
+	u8 soft_ver_major;
+	u8 soft_ver_minor;
+	u8 unused[15];
+};
+
+struct __packed mcba_usb_msg_ka_can {
+	u8 cmd_id;
+	u8 tx_err_cnt;
+	u8 rx_err_cnt;
+	u8 rx_buff_ovfl;
+	u8 tx_bus_off;
+	__be16 can_bitrate;
+	__le16 rx_lost;
+	u8 can_stat;
+	u8 soft_ver_major;
+	u8 soft_ver_minor;
+	u8 debug_mode;
+	u8 test_complete;
+	u8 test_result;
+	u8 unused[4];
+};
+
+struct __packed mcba_usb_msg_change_bitrate {
+	u8 cmd_id;
+	__be16 bitrate;
+	u8 unused[16];
+};
+
+struct __packed mcba_usb_msg_termination {
+	u8 cmd_id;
+	u8 termination;
+	u8 unused[17];
+};
+
+struct __packed mcba_usb_msg_fw_ver {
+	u8 cmd_id;
+	u8 pic;
+	u8 unused[17];
+};
+
+static const struct usb_device_id mcba_usb_table[] = {
+	{ USB_DEVICE(MCBA_VENDOR_ID, MCBA_PRODUCT_ID) },
+	{} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, mcba_usb_table);
+
+static const u16 mcba_termination[] = { MCBA_TERMINATION_DISABLED,
+					MCBA_TERMINATION_ENABLED };
+
+static const u32 mcba_bitrate[] = { 20000,  33333,  50000,  80000,  83333,
+				    100000, 125000, 150000, 175000, 200000,
+				    225000, 250000, 275000, 300000, 500000,
+				    625000, 800000, 1000000 };
+
+static inline void mcba_init_ctx(struct mcba_priv *priv)
+{
+	int i = 0;
+
+	for (i = 0; i < MCBA_MAX_TX_URBS; i++) {
+		priv->tx_context[i].ndx = MCBA_CTX_FREE;
+		priv->tx_context[i].priv = priv;
+	}
+
+	atomic_set(&priv->free_ctx_cnt, ARRAY_SIZE(priv->tx_context));
+}
+
+static inline struct mcba_usb_ctx *mcba_usb_get_free_ctx(struct mcba_priv *priv,
+							 struct can_frame *cf)
+{
+	int i = 0;
+	struct mcba_usb_ctx *ctx = NULL;
+
+	for (i = 0; i < MCBA_MAX_TX_URBS; i++) {
+		if (priv->tx_context[i].ndx == MCBA_CTX_FREE) {
+			ctx = &priv->tx_context[i];
+			ctx->ndx = i;
+
+			if (cf)
+				ctx->can = true;
+			else
+				ctx->can = false;
+
+			atomic_dec(&priv->free_ctx_cnt);
+			break;
+		}
+	}
+
+	if (!atomic_read(&priv->free_ctx_cnt))
+		/* That was the last free ctx. Slow down tx path */
+		netif_stop_queue(priv->netdev);
+
+	return ctx;
+}
+
+/* mcba_usb_free_ctx and mcba_usb_get_free_ctx are executed by different
+ * threads. The order of execution in below function is important.
+ */
+static inline void mcba_usb_free_ctx(struct mcba_usb_ctx *ctx)
+{
+	/* Increase number of free ctxs before freeing ctx */
+	atomic_inc(&ctx->priv->free_ctx_cnt);
+
+	ctx->ndx = MCBA_CTX_FREE;
+
+	/* Wake up the queue once ctx is marked free */
+	netif_wake_queue(ctx->priv->netdev);
+}
+
+static void mcba_usb_write_bulk_callback(struct urb *urb)
+{
+	struct mcba_usb_ctx *ctx = urb->context;
+	struct net_device *netdev;
+
+	WARN_ON(!ctx);
+
+	netdev = ctx->priv->netdev;
+
+	/* free up our allocated buffer */
+	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+			  urb->transfer_buffer, urb->transfer_dma);
+
+	if (ctx->can) {
+		if (!netif_device_present(netdev))
+			return;
+
+		netdev->stats.tx_packets++;
+		netdev->stats.tx_bytes += can_get_echo_skb(netdev, ctx->ndx,
+							   NULL);
+	}
+
+	if (urb->status)
+		netdev_info(netdev, "Tx URB aborted (%d)\n", urb->status);
+
+	/* Release the context */
+	mcba_usb_free_ctx(ctx);
+}
+
+/* Send data to device */
+static netdev_tx_t mcba_usb_xmit(struct mcba_priv *priv,
+				 struct mcba_usb_msg *usb_msg,
+				 struct mcba_usb_ctx *ctx)
+{
+	struct urb *urb;
+	u8 *buf;
+	int err;
+
+	/* create a URB, and a buffer for it, and copy the data to the URB */
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb)
+		return -ENOMEM;
+
+	buf = usb_alloc_coherent(priv->udev, MCBA_USB_TX_BUFF_SIZE, GFP_ATOMIC,
+				 &urb->transfer_dma);
+	if (!buf) {
+		err = -ENOMEM;
+		goto nomembuf;
+	}
+
+	memcpy(buf, usb_msg, MCBA_USB_TX_BUFF_SIZE);
+
+	usb_fill_bulk_urb(urb, priv->udev, priv->tx_pipe, buf, MCBA_USB_TX_BUFF_SIZE,
+			  mcba_usb_write_bulk_callback, ctx);
+
+	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	usb_anchor_urb(urb, &priv->tx_submitted);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (unlikely(err))
+		goto failed;
+
+	/* Release our reference to this URB, the USB core will eventually free
+	 * it entirely.
+	 */
+	usb_free_urb(urb);
+
+	return 0;
+
+failed:
+	usb_unanchor_urb(urb);
+	usb_free_coherent(priv->udev, MCBA_USB_TX_BUFF_SIZE, buf,
+			  urb->transfer_dma);
+
+	if (err == -ENODEV)
+		netif_device_detach(priv->netdev);
+	else
+		netdev_warn(priv->netdev, "failed tx_urb %d\n", err);
+
+nomembuf:
+	usb_free_urb(urb);
+
+	return err;
+}
+
+/* Send data to device */
+static netdev_tx_t mcba_usb_start_xmit(struct sk_buff *skb,
+				       struct net_device *netdev)
+{
+	struct mcba_priv *priv = netdev_priv(netdev);
+	struct can_frame *cf = (struct can_frame *)skb->data;
+	struct mcba_usb_ctx *ctx = NULL;
+	struct net_device_stats *stats = &priv->netdev->stats;
+	u16 sid;
+	int err;
+	struct mcba_usb_msg_can usb_msg = {
+		.cmd_id = MBCA_CMD_TRANSMIT_MESSAGE_EV
+	};
+
+	if (can_dev_dropped_skb(netdev, skb))
+		return NETDEV_TX_OK;
+
+	ctx = mcba_usb_get_free_ctx(priv, cf);
+	if (!ctx)
+		return NETDEV_TX_BUSY;
+
+	if (cf->can_id & CAN_EFF_FLAG) {
+		/* SIDH    | SIDL                 | EIDH   | EIDL
+		 * 28 - 21 | 20 19 18 x x x 17 16 | 15 - 8 | 7 - 0
+		 */
+		sid = MCBA_SIDL_EXID_MASK;
+		/* store 28-18 bits */
+		sid |= (cf->can_id & 0x1ffc0000) >> 13;
+		/* store 17-16 bits */
+		sid |= (cf->can_id & 0x30000) >> 16;
+		put_unaligned_be16(sid, &usb_msg.sid);
+
+		/* store 15-0 bits */
+		put_unaligned_be16(cf->can_id & 0xffff, &usb_msg.eid);
+	} else {
+		/* SIDH   | SIDL
+		 * 10 - 3 | 2 1 0 x x x x x
+		 */
+		put_unaligned_be16((cf->can_id & CAN_SFF_MASK) << 5,
+				   &usb_msg.sid);
+		usb_msg.eid = 0;
+	}
+
+	usb_msg.dlc = cf->len;
+
+	memcpy(usb_msg.data, cf->data, usb_msg.dlc);
+
+	if (cf->can_id & CAN_RTR_FLAG)
+		usb_msg.dlc |= MCBA_DLC_RTR_MASK;
+
+	can_put_echo_skb(skb, priv->netdev, ctx->ndx, 0);
+
+	err = mcba_usb_xmit(priv, (struct mcba_usb_msg *)&usb_msg, ctx);
+	if (err)
+		goto xmit_failed;
+
+	return NETDEV_TX_OK;
+
+xmit_failed:
+	can_free_echo_skb(priv->netdev, ctx->ndx, NULL);
+	mcba_usb_free_ctx(ctx);
+	stats->tx_dropped++;
+
+	return NETDEV_TX_OK;
+}
+
+/* Send cmd to device */
+static void mcba_usb_xmit_cmd(struct mcba_priv *priv,
+			      struct mcba_usb_msg *usb_msg)
+{
+	struct mcba_usb_ctx *ctx = NULL;
+	int err;
+
+	ctx = mcba_usb_get_free_ctx(priv, NULL);
+	if (!ctx) {
+		netdev_err(priv->netdev,
+			   "Lack of free ctx. Sending (%d) cmd aborted",
+			   usb_msg->cmd_id);
+
+		return;
+	}
+
+	err = mcba_usb_xmit(priv, usb_msg, ctx);
+	if (err)
+		netdev_err(priv->netdev, "Failed to send cmd (%d)",
+			   usb_msg->cmd_id);
+}
+
+static void mcba_usb_xmit_change_bitrate(struct mcba_priv *priv, u16 bitrate)
+{
+	struct mcba_usb_msg_change_bitrate usb_msg = {
+		.cmd_id = MBCA_CMD_CHANGE_BIT_RATE
+	};
+
+	put_unaligned_be16(bitrate, &usb_msg.bitrate);
+
+	mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);
+}
+
+static void mcba_usb_xmit_read_fw_ver(struct mcba_priv *priv, u8 pic)
+{
+	struct mcba_usb_msg_fw_ver usb_msg = {
+		.cmd_id = MBCA_CMD_READ_FW_VERSION,
+		.pic = pic
+	};
+
+	mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);
+}
+
+static void mcba_usb_process_can(struct mcba_priv *priv,
+				 struct mcba_usb_msg_can *msg)
+{
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	struct net_device_stats *stats = &priv->netdev->stats;
+	u16 sid;
+
+	skb = alloc_can_skb(priv->netdev, &cf);
+	if (!skb)
+		return;
+
+	sid = get_unaligned_be16(&msg->sid);
+
+	if (sid & MCBA_SIDL_EXID_MASK) {
+		/* SIDH    | SIDL                 | EIDH   | EIDL
+		 * 28 - 21 | 20 19 18 x x x 17 16 | 15 - 8 | 7 - 0
+		 */
+		cf->can_id = CAN_EFF_FLAG;
+
+		/* store 28-18 bits */
+		cf->can_id |= (sid & 0xffe0) << 13;
+		/* store 17-16 bits */
+		cf->can_id |= (sid & 3) << 16;
+		/* store 15-0 bits */
+		cf->can_id |= get_unaligned_be16(&msg->eid);
+	} else {
+		/* SIDH   | SIDL
+		 * 10 - 3 | 2 1 0 x x x x x
+		 */
+		cf->can_id = (sid & 0xffe0) >> 5;
+	}
+
+	cf->len = can_cc_dlc2len(msg->dlc & MCBA_DLC_MASK);
+
+	if (msg->dlc & MCBA_DLC_RTR_MASK) {
+		cf->can_id |= CAN_RTR_FLAG;
+	} else {
+		memcpy(cf->data, msg->data, cf->len);
+
+		stats->rx_bytes += cf->len;
+	}
+	stats->rx_packets++;
+
+	netif_rx(skb);
+}
+
+static void mcba_usb_process_ka_usb(struct mcba_priv *priv,
+				    struct mcba_usb_msg_ka_usb *msg)
+{
+	if (unlikely(priv->usb_ka_first_pass)) {
+		netdev_info(priv->netdev, "PIC USB version %u.%u\n",
+			    msg->soft_ver_major, msg->soft_ver_minor);
+
+		priv->usb_ka_first_pass = false;
+	}
+
+	if (msg->termination_state == MCBA_VER_TERMINATION_ON)
+		priv->can.termination = MCBA_TERMINATION_ENABLED;
+	else
+		priv->can.termination = MCBA_TERMINATION_DISABLED;
+}
+
+static u32 convert_can2host_bitrate(struct mcba_usb_msg_ka_can *msg)
+{
+	const u32 bitrate = get_unaligned_be16(&msg->can_bitrate);
+
+	if ((bitrate == 33) || (bitrate == 83))
+		return bitrate * 1000 + 333;
+	else
+		return bitrate * 1000;
+}
+
+static void mcba_usb_process_ka_can(struct mcba_priv *priv,
+				    struct mcba_usb_msg_ka_can *msg)
+{
+	if (unlikely(priv->can_ka_first_pass)) {
+		netdev_info(priv->netdev, "PIC CAN version %u.%u\n",
+			    msg->soft_ver_major, msg->soft_ver_minor);
+
+		priv->can_ka_first_pass = false;
+	}
+
+	if (unlikely(priv->can_speed_check)) {
+		const u32 bitrate = convert_can2host_bitrate(msg);
+
+		priv->can_speed_check = false;
+
+		if (bitrate != priv->can.bittiming.bitrate)
+			netdev_err(
+			    priv->netdev,
+			    "Wrong bitrate reported by the device (%u). Expected %u",
+			    bitrate, priv->can.bittiming.bitrate);
+	}
+
+	priv->bec.txerr = msg->tx_err_cnt;
+	priv->bec.rxerr = msg->rx_err_cnt;
+
+	if (msg->tx_bus_off)
+		priv->can.state = CAN_STATE_BUS_OFF;
+
+	else if ((priv->bec.txerr > MCBA_CAN_STATE_ERR_PSV_TH) ||
+		 (priv->bec.rxerr > MCBA_CAN_STATE_ERR_PSV_TH))
+		priv->can.state = CAN_STATE_ERROR_PASSIVE;
+
+	else if ((priv->bec.txerr > MCBA_CAN_STATE_WRN_TH) ||
+		 (priv->bec.rxerr > MCBA_CAN_STATE_WRN_TH))
+		priv->can.state = CAN_STATE_ERROR_WARNING;
+}
+
+static void mcba_usb_process_rx(struct mcba_priv *priv,
+				struct mcba_usb_msg *msg)
+{
+	switch (msg->cmd_id) {
+	case MBCA_CMD_I_AM_ALIVE_FROM_CAN:
+		mcba_usb_process_ka_can(priv,
+					(struct mcba_usb_msg_ka_can *)msg);
+		break;
+
+	case MBCA_CMD_I_AM_ALIVE_FROM_USB:
+		mcba_usb_process_ka_usb(priv,
+					(struct mcba_usb_msg_ka_usb *)msg);
+		break;
+
+	case MBCA_CMD_RECEIVE_MESSAGE:
+		mcba_usb_process_can(priv, (struct mcba_usb_msg_can *)msg);
+		break;
+
+	case MBCA_CMD_NOTHING_TO_SEND:
+		/* Side effect of communication between PIC_USB and PIC_CAN.
+		 * PIC_CAN is telling us that it has nothing to send
+		 */
+		break;
+
+	case MBCA_CMD_TRANSMIT_MESSAGE_RSP:
+		/* Transmission response from the device containing timestamp */
+		break;
+
+	default:
+		netdev_warn(priv->netdev, "Unsupported msg (0x%X)",
+			    msg->cmd_id);
+		break;
+	}
+}
+
+/* Callback for reading data from device
+ *
+ * Check urb status, call read function and resubmit urb read operation.
+ */
+static void mcba_usb_read_bulk_callback(struct urb *urb)
+{
+	struct mcba_priv *priv = urb->context;
+	struct net_device *netdev;
+	int retval;
+	int pos = 0;
+
+	netdev = priv->netdev;
+
+	if (!netif_device_present(netdev))
+		return;
+
+	switch (urb->status) {
+	case 0: /* success */
+		break;
+
+	case -ENOENT:
+	case -EPIPE:
+	case -EPROTO:
+	case -ESHUTDOWN:
+		return;
+
+	default:
+		netdev_info(netdev, "Rx URB aborted (%d)\n", urb->status);
+
+		goto resubmit_urb;
+	}
+
+	while (pos < urb->actual_length) {
+		struct mcba_usb_msg *msg;
+
+		if (pos + sizeof(struct mcba_usb_msg) > urb->actual_length) {
+			netdev_err(priv->netdev, "format error\n");
+			break;
+		}
+
+		msg = (struct mcba_usb_msg *)(urb->transfer_buffer + pos);
+		mcba_usb_process_rx(priv, msg);
+
+		pos += sizeof(struct mcba_usb_msg);
+	}
+
+resubmit_urb:
+
+	usb_fill_bulk_urb(urb, priv->udev,
+			  priv->rx_pipe,
+			  urb->transfer_buffer, MCBA_USB_RX_BUFF_SIZE,
+			  mcba_usb_read_bulk_callback, priv);
+
+	usb_anchor_urb(urb, &priv->rx_submitted);
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (!retval)
+		return;
+
+	usb_unanchor_urb(urb);
+
+	if (retval == -ENODEV)
+		netif_device_detach(netdev);
+	else
+		netdev_err(netdev, "failed resubmitting read bulk urb: %d\n",
+			   retval);
+}
+
+/* Start USB device */
+static int mcba_usb_start(struct mcba_priv *priv)
+{
+	struct net_device *netdev = priv->netdev;
+	int err, i;
+
+	mcba_init_ctx(priv);
+
+	for (i = 0; i < MCBA_MAX_RX_URBS; i++) {
+		struct urb *urb = NULL;
+		u8 *buf;
+		dma_addr_t buf_dma;
+
+		/* create a URB, and a buffer for it */
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			err = -ENOMEM;
+			break;
+		}
+
+		buf = usb_alloc_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
+					 GFP_KERNEL, &buf_dma);
+		if (!buf) {
+			netdev_err(netdev, "No memory left for USB buffer\n");
+			usb_free_urb(urb);
+			err = -ENOMEM;
+			break;
+		}
+
+		urb->transfer_dma = buf_dma;
+
+		usb_fill_bulk_urb(urb, priv->udev,
+				  priv->rx_pipe,
+				  buf, MCBA_USB_RX_BUFF_SIZE,
+				  mcba_usb_read_bulk_callback, priv);
+		urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+		usb_anchor_urb(urb, &priv->rx_submitted);
+
+		err = usb_submit_urb(urb, GFP_KERNEL);
+		if (err) {
+			usb_unanchor_urb(urb);
+			usb_free_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
+					  buf, buf_dma);
+			usb_free_urb(urb);
+			break;
+		}
+
+		priv->rxbuf[i] = buf;
+		priv->rxbuf_dma[i] = buf_dma;
+
+		/* Drop reference, USB core will take care of freeing it */
+		usb_free_urb(urb);
+	}
+
+	/* Did we submit any URBs */
+	if (i == 0) {
+		netdev_warn(netdev, "couldn't setup read URBs\n");
+		return err;
+	}
+
+	/* Warn if we've couldn't transmit all the URBs */
+	if (i < MCBA_MAX_RX_URBS)
+		netdev_warn(netdev, "rx performance may be slow\n");
+
+	mcba_usb_xmit_read_fw_ver(priv, MCBA_VER_REQ_USB);
+	mcba_usb_xmit_read_fw_ver(priv, MCBA_VER_REQ_CAN);
+
+	return err;
+}
+
+/* Open USB device */
+static int mcba_usb_open(struct net_device *netdev)
+{
+	struct mcba_priv *priv = netdev_priv(netdev);
+	int err;
+
+	/* common open */
+	err = open_candev(netdev);
+	if (err)
+		return err;
+
+	priv->can_speed_check = true;
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	netif_start_queue(netdev);
+
+	return 0;
+}
+
+static void mcba_urb_unlink(struct mcba_priv *priv)
+{
+	int i;
+
+	usb_kill_anchored_urbs(&priv->rx_submitted);
+
+	for (i = 0; i < MCBA_MAX_RX_URBS; ++i)
+		usb_free_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
+				  priv->rxbuf[i], priv->rxbuf_dma[i]);
+
+	usb_kill_anchored_urbs(&priv->tx_submitted);
+}
+
+/* Close USB device */
+static int mcba_usb_close(struct net_device *netdev)
+{
+	struct mcba_priv *priv = netdev_priv(netdev);
+
+	priv->can.state = CAN_STATE_STOPPED;
+
+	netif_stop_queue(netdev);
+
+	/* Stop polling */
+	mcba_urb_unlink(priv);
+
+	close_candev(netdev);
+
+	return 0;
+}
+
+/* Set network device mode
+ *
+ * Maybe we should leave this function empty, because the device
+ * set mode variable with open command.
+ */
+static int mcba_net_set_mode(struct net_device *netdev, enum can_mode mode)
+{
+	return 0;
+}
+
+static int mcba_net_get_berr_counter(const struct net_device *netdev,
+				     struct can_berr_counter *bec)
+{
+	struct mcba_priv *priv = netdev_priv(netdev);
+
+	bec->txerr = priv->bec.txerr;
+	bec->rxerr = priv->bec.rxerr;
+
+	return 0;
+}
+
+static const struct net_device_ops mcba_netdev_ops = {
+	.ndo_open = mcba_usb_open,
+	.ndo_stop = mcba_usb_close,
+	.ndo_start_xmit = mcba_usb_start_xmit,
+};
+
+static const struct ethtool_ops mcba_ethtool_ops = {
+	.get_ts_info = ethtool_op_get_ts_info,
+};
+
+/* Microchip CANBUS has hardcoded bittiming values by default.
+ * This function sends request via USB to change the speed and align bittiming
+ * values for presentation purposes only
+ */
+static int mcba_net_set_bittiming(struct net_device *netdev)
+{
+	struct mcba_priv *priv = netdev_priv(netdev);
+	const u16 bitrate_kbps = priv->can.bittiming.bitrate / 1000;
+
+	mcba_usb_xmit_change_bitrate(priv, bitrate_kbps);
+
+	return 0;
+}
+
+static int mcba_set_termination(struct net_device *netdev, u16 term)
+{
+	struct mcba_priv *priv = netdev_priv(netdev);
+	struct mcba_usb_msg_termination usb_msg = {
+		.cmd_id = MBCA_CMD_SETUP_TERMINATION_RESISTANCE
+	};
+
+	if (term == MCBA_TERMINATION_ENABLED)
+		usb_msg.termination = MCBA_VER_TERMINATION_ON;
+	else
+		usb_msg.termination = MCBA_VER_TERMINATION_OFF;
+
+	mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);
+
+	return 0;
+}
+
+static int mcba_usb_probe(struct usb_interface *intf,
+			  const struct usb_device_id *id)
+{
+	struct net_device *netdev;
+	struct mcba_priv *priv;
+	int err;
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *in, *out;
+
+	err = usb_find_common_endpoints(intf->cur_altsetting, &in, &out, NULL, NULL);
+	if (err) {
+		dev_err(&intf->dev, "Can't find endpoints\n");
+		return err;
+	}
+
+	netdev = alloc_candev(sizeof(struct mcba_priv), MCBA_MAX_TX_URBS);
+	if (!netdev) {
+		dev_err(&intf->dev, "Couldn't alloc candev\n");
+		return -ENOMEM;
+	}
+
+	priv = netdev_priv(netdev);
+
+	priv->udev = usbdev;
+	priv->netdev = netdev;
+	priv->usb_ka_first_pass = true;
+	priv->can_ka_first_pass = true;
+	priv->can_speed_check = false;
+
+	init_usb_anchor(&priv->rx_submitted);
+	init_usb_anchor(&priv->tx_submitted);
+
+	usb_set_intfdata(intf, priv);
+
+	/* Init CAN device */
+	priv->can.state = CAN_STATE_STOPPED;
+	priv->can.termination_const = mcba_termination;
+	priv->can.termination_const_cnt = ARRAY_SIZE(mcba_termination);
+	priv->can.bitrate_const = mcba_bitrate;
+	priv->can.bitrate_const_cnt = ARRAY_SIZE(mcba_bitrate);
+
+	priv->can.do_set_termination = mcba_set_termination;
+	priv->can.do_set_mode = mcba_net_set_mode;
+	priv->can.do_get_berr_counter = mcba_net_get_berr_counter;
+	priv->can.do_set_bittiming = mcba_net_set_bittiming;
+
+	netdev->netdev_ops = &mcba_netdev_ops;
+	netdev->ethtool_ops = &mcba_ethtool_ops;
+
+	netdev->flags |= IFF_ECHO; /* we support local echo */
+
+	SET_NETDEV_DEV(netdev, &intf->dev);
+
+	err = register_candev(netdev);
+	if (err) {
+		netdev_err(netdev, "couldn't register CAN device: %d\n", err);
+
+		goto cleanup_free_candev;
+	}
+
+	priv->rx_pipe = usb_rcvbulkpipe(priv->udev, in->bEndpointAddress);
+	priv->tx_pipe = usb_sndbulkpipe(priv->udev, out->bEndpointAddress);
+
+	/* Start USB dev only if we have successfully registered CAN device */
+	err = mcba_usb_start(priv);
+	if (err) {
+		if (err == -ENODEV)
+			netif_device_detach(priv->netdev);
+
+		netdev_warn(netdev, "couldn't start device: %d\n", err);
+
+		goto cleanup_unregister_candev;
+	}
+
+	dev_info(&intf->dev, "Microchip CAN BUS Analyzer connected\n");
+
+	return 0;
+
+cleanup_unregister_candev:
+	unregister_candev(priv->netdev);
+
+cleanup_free_candev:
+	free_candev(netdev);
+
+	return err;
+}
+
+/* Called by the usb core when driver is unloaded or device is removed */
+static void mcba_usb_disconnect(struct usb_interface *intf)
+{
+	struct mcba_priv *priv = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+
+	netdev_info(priv->netdev, "device disconnected\n");
+
+	unregister_candev(priv->netdev);
+	mcba_urb_unlink(priv);
+	free_candev(priv->netdev);
+}
+
+static struct usb_driver mcba_usb_driver = {
+	.name = MCBA_MODULE_NAME,
+	.probe = mcba_usb_probe,
+	.disconnect = mcba_usb_disconnect,
+	.id_table = mcba_usb_table,
+};
+
+module_usb_driver(mcba_usb_driver);
+
+MODULE_AUTHOR("Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com>");
+MODULE_DESCRIPTION("SocketCAN driver for Microchip CAN BUS Analyzer Tool");
+MODULE_LICENSE("GPL v2");

linux-7.2.3/drivers/net/can/usb/nct6694_canfd.c

@@ -0,0 +1,831 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Nuvoton NCT6694 Socket CANfd driver based on USB interface.
+ *
+ * Copyright (C) 2025 Nuvoton Technology Corp.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/can/dev.h>
+#include <linux/can/rx-offload.h>
+#include <linux/ethtool.h>
+#include <linux/idr.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/mfd/nct6694.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+
+#define DEVICE_NAME "nct6694-canfd"
+
+/* USB command module type for NCT6694 CANfd controller.
+ * This defines the module type used for communication with the NCT6694
+ * CANfd controller over the USB interface.
+ */
+#define NCT6694_CANFD_MOD			0x05
+
+/* Command 00h - CAN Setting and Initialization */
+#define NCT6694_CANFD_SETTING			0x00
+#define NCT6694_CANFD_SETTING_ACTIVE_CTRL1	BIT(0)
+#define NCT6694_CANFD_SETTING_ACTIVE_CTRL2	BIT(1)
+#define NCT6694_CANFD_SETTING_ACTIVE_NBTP_DBTP	BIT(2)
+#define NCT6694_CANFD_SETTING_CTRL1_MON		BIT(0)
+#define NCT6694_CANFD_SETTING_CTRL1_NISO	BIT(1)
+#define NCT6694_CANFD_SETTING_CTRL1_LBCK	BIT(2)
+#define NCT6694_CANFD_SETTING_NBTP_NTSEG2	GENMASK(6, 0)
+#define NCT6694_CANFD_SETTING_NBTP_NTSEG1	GENMASK(15, 8)
+#define NCT6694_CANFD_SETTING_NBTP_NBRP		GENMASK(24, 16)
+#define NCT6694_CANFD_SETTING_NBTP_NSJW		GENMASK(31, 25)
+#define NCT6694_CANFD_SETTING_DBTP_DSJW		GENMASK(3, 0)
+#define NCT6694_CANFD_SETTING_DBTP_DTSEG2	GENMASK(7, 4)
+#define NCT6694_CANFD_SETTING_DBTP_DTSEG1	GENMASK(12, 8)
+#define NCT6694_CANFD_SETTING_DBTP_DBRP		GENMASK(20, 16)
+#define NCT6694_CANFD_SETTING_DBTP_TDC		BIT(23)
+
+/* Command 01h - CAN Information */
+#define NCT6694_CANFD_INFORMATION		0x01
+#define NCT6694_CANFD_INFORMATION_SEL		0x00
+
+/* Command 02h - CAN Event */
+#define NCT6694_CANFD_EVENT			0x02
+#define NCT6694_CANFD_EVENT_SEL(idx, mask)	\
+	((idx ? 0x80 : 0x00) | ((mask) & 0x7F))
+
+#define NCT6694_CANFD_EVENT_MASK		GENMASK(5, 0)
+#define NCT6694_CANFD_EVT_TX_FIFO_EMPTY		BIT(7)	/* Read-clear */
+#define NCT6694_CANFD_EVT_RX_DATA_LOST		BIT(5)	/* Read-clear */
+#define NCT6694_CANFD_EVT_RX_DATA_IN		BIT(7)	/* Read-clear */
+
+/* Command 10h - CAN Deliver */
+#define NCT6694_CANFD_DELIVER			0x10
+#define NCT6694_CANFD_DELIVER_SEL(buf_cnt)	\
+	((buf_cnt) & 0xFF)
+
+/* Command 11h - CAN Receive */
+#define NCT6694_CANFD_RECEIVE			0x11
+#define NCT6694_CANFD_RECEIVE_SEL(idx, buf_cnt)	\
+	((idx ? 0x80 : 0x00) | ((buf_cnt) & 0x7F))
+
+#define NCT6694_CANFD_FRAME_TAG(idx)		(0xC0 | (idx))
+#define NCT6694_CANFD_FRAME_FLAG_EFF		BIT(0)
+#define NCT6694_CANFD_FRAME_FLAG_RTR		BIT(1)
+#define NCT6694_CANFD_FRAME_FLAG_FD		BIT(2)
+#define NCT6694_CANFD_FRAME_FLAG_BRS		BIT(3)
+#define NCT6694_CANFD_FRAME_FLAG_ERR		BIT(4)
+
+#define NCT6694_NAPI_WEIGHT			32
+
+enum nct6694_event_err {
+	NCT6694_CANFD_EVT_ERR_NO_ERROR = 0,
+	NCT6694_CANFD_EVT_ERR_CRC_ERROR,
+	NCT6694_CANFD_EVT_ERR_STUFF_ERROR,
+	NCT6694_CANFD_EVT_ERR_ACK_ERROR,
+	NCT6694_CANFD_EVT_ERR_FORM_ERROR,
+	NCT6694_CANFD_EVT_ERR_BIT_ERROR,
+	NCT6694_CANFD_EVT_ERR_TIMEOUT_ERROR,
+	NCT6694_CANFD_EVT_ERR_UNKNOWN_ERROR,
+};
+
+enum nct6694_event_status {
+	NCT6694_CANFD_EVT_STS_ERROR_ACTIVE = 0,
+	NCT6694_CANFD_EVT_STS_ERROR_PASSIVE,
+	NCT6694_CANFD_EVT_STS_BUS_OFF,
+	NCT6694_CANFD_EVT_STS_WARNING,
+};
+
+struct __packed nct6694_canfd_setting {
+	__le32 nbr;
+	__le32 dbr;
+	u8 active;
+	u8 reserved[3];
+	__le16 ctrl1;
+	__le16 ctrl2;
+	__le32 nbtp;
+	__le32 dbtp;
+};
+
+struct __packed nct6694_canfd_information {
+	u8 tx_fifo_cnt;
+	u8 rx_fifo_cnt;
+	u8 reserved[2];
+	__le32 can_clk;
+};
+
+struct __packed nct6694_canfd_event {
+	u8 err;
+	u8 status;
+	u8 tx_evt;
+	u8 rx_evt;
+	u8 rec;
+	u8 tec;
+	u8 reserved[2];
+};
+
+struct __packed nct6694_canfd_frame {
+	u8 tag;
+	u8 flag;
+	u8 reserved;
+	u8 length;
+	__le32 id;
+	u8 data[CANFD_MAX_DLEN];
+};
+
+struct nct6694_canfd_priv {
+	struct can_priv can;	/* must be the first member */
+	struct can_rx_offload offload;
+	struct net_device *ndev;
+	struct nct6694 *nct6694;
+	struct workqueue_struct *wq;
+	struct work_struct tx_work;
+	struct nct6694_canfd_frame tx;
+	struct nct6694_canfd_frame rx;
+	struct nct6694_canfd_event event[2];
+	struct can_berr_counter bec;
+};
+
+static inline struct nct6694_canfd_priv *rx_offload_to_priv(struct can_rx_offload *offload)
+{
+	return container_of(offload, struct nct6694_canfd_priv, offload);
+}
+
+static const struct can_bittiming_const nct6694_canfd_bittiming_nominal_const = {
+	.name = DEVICE_NAME,
+	.tseg1_min = 1,
+	.tseg1_max = 256,
+	.tseg2_min = 1,
+	.tseg2_max = 128,
+	.sjw_max = 128,
+	.brp_min = 1,
+	.brp_max = 512,
+	.brp_inc = 1,
+};
+
+static const struct can_bittiming_const nct6694_canfd_bittiming_data_const = {
+	.name = DEVICE_NAME,
+	.tseg1_min = 1,
+	.tseg1_max = 32,
+	.tseg2_min = 1,
+	.tseg2_max = 16,
+	.sjw_max = 16,
+	.brp_min = 1,
+	.brp_max = 32,
+	.brp_inc = 1,
+};
+
+static void nct6694_canfd_rx_offload(struct can_rx_offload *offload,
+				     struct sk_buff *skb)
+{
+	struct nct6694_canfd_priv *priv = rx_offload_to_priv(offload);
+	int ret;
+
+	ret = can_rx_offload_queue_tail(offload, skb);
+	if (ret)
+		priv->ndev->stats.rx_fifo_errors++;
+}
+
+static void nct6694_canfd_handle_lost_msg(struct net_device *ndev)
+{
+	struct nct6694_canfd_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+
+	netdev_dbg(ndev, "RX FIFO overflow, message(s) lost.\n");
+
+	stats->rx_errors++;
+	stats->rx_over_errors++;
+
+	skb = alloc_can_err_skb(ndev, &cf);
+	if (!skb)
+		return;
+
+	cf->can_id |= CAN_ERR_CRTL;
+	cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+
+	nct6694_canfd_rx_offload(&priv->offload, skb);
+}
+
+static void nct6694_canfd_handle_rx(struct net_device *ndev, u8 rx_evt)
+{
+	struct net_device_stats *stats = &ndev->stats;
+	struct nct6694_canfd_priv *priv = netdev_priv(ndev);
+	struct nct6694_canfd_frame *frame = &priv->rx;
+	const struct nct6694_cmd_header cmd_hd = {
+		.mod = NCT6694_CANFD_MOD,
+		.cmd = NCT6694_CANFD_RECEIVE,
+		.sel = NCT6694_CANFD_RECEIVE_SEL(ndev->dev_port, 1),
+		.len = cpu_to_le16(sizeof(*frame))
+	};
+	struct sk_buff *skb;
+	int ret;
+
+	ret = nct6694_read_msg(priv->nct6694, &cmd_hd, frame);
+	if (ret)
+		return;
+
+	if (frame->flag & NCT6694_CANFD_FRAME_FLAG_FD) {
+		struct canfd_frame *cfd;
+
+		skb = alloc_canfd_skb(priv->ndev, &cfd);
+		if (!skb) {
+			stats->rx_dropped++;
+			return;
+		}
+
+		cfd->can_id = le32_to_cpu(frame->id);
+		cfd->len = canfd_sanitize_len(frame->length);
+		if (frame->flag & NCT6694_CANFD_FRAME_FLAG_EFF)
+			cfd->can_id |= CAN_EFF_FLAG;
+		if (frame->flag & NCT6694_CANFD_FRAME_FLAG_BRS)
+			cfd->flags |= CANFD_BRS;
+		if (frame->flag & NCT6694_CANFD_FRAME_FLAG_ERR)
+			cfd->flags |= CANFD_ESI;
+
+		memcpy(cfd->data, frame->data, cfd->len);
+	} else {
+		struct can_frame *cf;
+
+		skb = alloc_can_skb(priv->ndev, &cf);
+		if (!skb) {
+			stats->rx_dropped++;
+			return;
+		}
+
+		cf->can_id = le32_to_cpu(frame->id);
+		cf->len = can_cc_dlc2len(frame->length);
+		if (frame->flag & NCT6694_CANFD_FRAME_FLAG_EFF)
+			cf->can_id |= CAN_EFF_FLAG;
+
+		if (frame->flag & NCT6694_CANFD_FRAME_FLAG_RTR)
+			cf->can_id |= CAN_RTR_FLAG;
+		else
+			memcpy(cf->data, frame->data, cf->len);
+	}
+
+	nct6694_canfd_rx_offload(&priv->offload, skb);
+}
+
+static int nct6694_canfd_get_berr_counter(const struct net_device *ndev,
+					  struct can_berr_counter *bec)
+{
+	struct nct6694_canfd_priv *priv = netdev_priv(ndev);
+
+	*bec = priv->bec;
+
+	return 0;
+}
+
+static void nct6694_canfd_handle_state_change(struct net_device *ndev, u8 status)
+{
+	struct nct6694_canfd_priv *priv = netdev_priv(ndev);
+	enum can_state new_state, rx_state, tx_state;
+	struct can_berr_counter bec;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+
+	nct6694_canfd_get_berr_counter(ndev, &bec);
+	can_state_get_by_berr_counter(ndev, &bec, &tx_state, &rx_state);
+
+	new_state = max(tx_state, rx_state);
+
+	/* state hasn't changed */
+	if (new_state == priv->can.state)
+		return;
+
+	skb = alloc_can_err_skb(ndev, &cf);
+
+	can_change_state(ndev, cf, tx_state, rx_state);
+
+	if (new_state == CAN_STATE_BUS_OFF) {
+		can_bus_off(ndev);
+	} else if (cf) {
+		cf->can_id |= CAN_ERR_CNT;
+		cf->data[6] = bec.txerr;
+		cf->data[7] = bec.rxerr;
+	}
+
+	if (skb)
+		nct6694_canfd_rx_offload(&priv->offload, skb);
+}
+
+static void nct6694_canfd_handle_bus_err(struct net_device *ndev, u8 bus_err)
+{
+	struct nct6694_canfd_priv *priv = netdev_priv(ndev);
+	struct can_frame *cf;
+	struct sk_buff *skb;
+
+	priv->can.can_stats.bus_error++;
+
+	skb = alloc_can_err_skb(ndev, &cf);
+	if (cf)
+		cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+
+	switch (bus_err) {
+	case NCT6694_CANFD_EVT_ERR_CRC_ERROR:
+		netdev_dbg(ndev, "CRC error\n");
+		ndev->stats.rx_errors++;
+		if (cf)
+			cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ;
+		break;
+
+	case NCT6694_CANFD_EVT_ERR_STUFF_ERROR:
+		netdev_dbg(ndev, "Stuff error\n");
+		ndev->stats.rx_errors++;
+		if (cf)
+			cf->data[2] |= CAN_ERR_PROT_STUFF;
+		break;
+
+	case NCT6694_CANFD_EVT_ERR_ACK_ERROR:
+		netdev_dbg(ndev, "Ack error\n");
+		ndev->stats.tx_errors++;
+		if (cf) {
+			cf->can_id |= CAN_ERR_ACK;
+			cf->data[2] |= CAN_ERR_PROT_TX;
+		}
+		break;
+
+	case NCT6694_CANFD_EVT_ERR_FORM_ERROR:
+		netdev_dbg(ndev, "Form error\n");
+		ndev->stats.rx_errors++;
+		if (cf)
+			cf->data[2] |= CAN_ERR_PROT_FORM;
+		break;
+
+	case NCT6694_CANFD_EVT_ERR_BIT_ERROR:
+		netdev_dbg(ndev, "Bit error\n");
+		ndev->stats.tx_errors++;
+		if (cf)
+			cf->data[2] |= CAN_ERR_PROT_TX | CAN_ERR_PROT_BIT;
+		break;
+
+	default:
+		break;
+	}
+
+	if (skb)
+		nct6694_canfd_rx_offload(&priv->offload, skb);
+}
+
+static void nct6694_canfd_handle_tx(struct net_device *ndev)
+{
+	struct nct6694_canfd_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+
+	stats->tx_bytes += can_rx_offload_get_echo_skb_queue_tail(&priv->offload,
+								  0, NULL);
+	stats->tx_packets++;
+	netif_wake_queue(ndev);
+}
+
+static irqreturn_t nct6694_canfd_irq(int irq, void *data)
+{
+	struct net_device *ndev = data;
+	struct nct6694_canfd_priv *priv = netdev_priv(ndev);
+	struct nct6694_canfd_event *event = &priv->event[ndev->dev_port];
+	const struct nct6694_cmd_header cmd_hd = {
+		.mod = NCT6694_CANFD_MOD,
+		.cmd = NCT6694_CANFD_EVENT,
+		.sel = NCT6694_CANFD_EVENT_SEL(ndev->dev_port, NCT6694_CANFD_EVENT_MASK),
+		.len = cpu_to_le16(sizeof(priv->event))
+	};
+	irqreturn_t handled = IRQ_NONE;
+	int ret;
+
+	ret = nct6694_read_msg(priv->nct6694, &cmd_hd, priv->event);
+	if (ret < 0)
+		return handled;
+
+	if (event->rx_evt & NCT6694_CANFD_EVT_RX_DATA_IN) {
+		nct6694_canfd_handle_rx(ndev, event->rx_evt);
+		handled = IRQ_HANDLED;
+	}
+
+	if (event->rx_evt & NCT6694_CANFD_EVT_RX_DATA_LOST) {
+		nct6694_canfd_handle_lost_msg(ndev);
+		handled = IRQ_HANDLED;
+	}
+
+	if (event->status) {
+		nct6694_canfd_handle_state_change(ndev, event->status);
+		handled = IRQ_HANDLED;
+	}
+
+	if (event->err != NCT6694_CANFD_EVT_ERR_NO_ERROR) {
+		if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
+			nct6694_canfd_handle_bus_err(ndev, event->err);
+		handled = IRQ_HANDLED;
+	}
+
+	if (event->tx_evt & NCT6694_CANFD_EVT_TX_FIFO_EMPTY) {
+		nct6694_canfd_handle_tx(ndev);
+		handled = IRQ_HANDLED;
+	}
+
+	if (handled)
+		can_rx_offload_threaded_irq_finish(&priv->offload);
+
+	priv->bec.rxerr = event->rec;
+	priv->bec.txerr = event->tec;
+
+	return handled;
+}
+
+static void nct6694_canfd_tx_work(struct work_struct *work)
+{
+	struct nct6694_canfd_priv *priv = container_of(work,
+						       struct nct6694_canfd_priv,
+						       tx_work);
+	struct nct6694_canfd_frame *frame = &priv->tx;
+	struct net_device *ndev = priv->ndev;
+	struct net_device_stats *stats = &ndev->stats;
+	struct sk_buff *skb = priv->can.echo_skb[0];
+	static const struct nct6694_cmd_header cmd_hd = {
+		.mod = NCT6694_CANFD_MOD,
+		.cmd = NCT6694_CANFD_DELIVER,
+		.sel = NCT6694_CANFD_DELIVER_SEL(1),
+		.len = cpu_to_le16(sizeof(*frame))
+	};
+	u32 txid;
+	int err;
+
+	memset(frame, 0, sizeof(*frame));
+
+	frame->tag = NCT6694_CANFD_FRAME_TAG(ndev->dev_port);
+
+	if (can_is_canfd_skb(skb)) {
+		struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
+
+		if (cfd->flags & CANFD_BRS)
+			frame->flag |= NCT6694_CANFD_FRAME_FLAG_BRS;
+
+		if (cfd->can_id & CAN_EFF_FLAG) {
+			txid = cfd->can_id & CAN_EFF_MASK;
+			frame->flag |= NCT6694_CANFD_FRAME_FLAG_EFF;
+		} else {
+			txid = cfd->can_id & CAN_SFF_MASK;
+		}
+		frame->flag |= NCT6694_CANFD_FRAME_FLAG_FD;
+		frame->id = cpu_to_le32(txid);
+		frame->length = canfd_sanitize_len(cfd->len);
+
+		memcpy(frame->data, cfd->data, frame->length);
+	} else {
+		struct can_frame *cf = (struct can_frame *)skb->data;
+
+		if (cf->can_id & CAN_EFF_FLAG) {
+			txid = cf->can_id & CAN_EFF_MASK;
+			frame->flag |= NCT6694_CANFD_FRAME_FLAG_EFF;
+		} else {
+			txid = cf->can_id & CAN_SFF_MASK;
+		}
+
+		if (cf->can_id & CAN_RTR_FLAG)
+			frame->flag |= NCT6694_CANFD_FRAME_FLAG_RTR;
+		else
+			memcpy(frame->data, cf->data, cf->len);
+
+		frame->id = cpu_to_le32(txid);
+		frame->length = cf->len;
+	}
+
+	err = nct6694_write_msg(priv->nct6694, &cmd_hd, frame);
+	if (err) {
+		can_free_echo_skb(ndev, 0, NULL);
+		stats->tx_dropped++;
+		stats->tx_errors++;
+		netif_wake_queue(ndev);
+	}
+}
+
+static netdev_tx_t nct6694_canfd_start_xmit(struct sk_buff *skb,
+					    struct net_device *ndev)
+{
+	struct nct6694_canfd_priv *priv = netdev_priv(ndev);
+
+	if (can_dev_dropped_skb(ndev, skb))
+		return NETDEV_TX_OK;
+
+	netif_stop_queue(ndev);
+	can_put_echo_skb(skb, ndev, 0, 0);
+	queue_work(priv->wq, &priv->tx_work);
+
+	return NETDEV_TX_OK;
+}
+
+static int nct6694_canfd_start(struct net_device *ndev)
+{
+	struct nct6694_canfd_priv *priv = netdev_priv(ndev);
+	const struct can_bittiming *n_bt = &priv->can.bittiming;
+	const struct can_bittiming *d_bt = &priv->can.fd.data_bittiming;
+	struct nct6694_canfd_setting *setting __free(kfree) = NULL;
+	const struct nct6694_cmd_header cmd_hd = {
+		.mod = NCT6694_CANFD_MOD,
+		.cmd = NCT6694_CANFD_SETTING,
+		.sel = ndev->dev_port,
+		.len = cpu_to_le16(sizeof(*setting))
+	};
+	u32 en_tdc;
+	int ret;
+
+	setting = kzalloc_obj(*setting);
+	if (!setting)
+		return -ENOMEM;
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
+		setting->ctrl1 |= cpu_to_le16(NCT6694_CANFD_SETTING_CTRL1_MON);
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_FD_NON_ISO)
+		setting->ctrl1 |= cpu_to_le16(NCT6694_CANFD_SETTING_CTRL1_NISO);
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
+		setting->ctrl1 |= cpu_to_le16(NCT6694_CANFD_SETTING_CTRL1_LBCK);
+
+	/* Disable clock divider */
+	setting->ctrl2 = 0;
+
+	setting->nbtp = cpu_to_le32(FIELD_PREP(NCT6694_CANFD_SETTING_NBTP_NSJW,
+					       n_bt->sjw - 1) |
+				    FIELD_PREP(NCT6694_CANFD_SETTING_NBTP_NBRP,
+					       n_bt->brp - 1) |
+				    FIELD_PREP(NCT6694_CANFD_SETTING_NBTP_NTSEG2,
+					       n_bt->phase_seg2 - 1) |
+				    FIELD_PREP(NCT6694_CANFD_SETTING_NBTP_NTSEG1,
+					       n_bt->prop_seg + n_bt->phase_seg1 - 1));
+
+	if (d_bt->brp <= 2)
+		en_tdc = NCT6694_CANFD_SETTING_DBTP_TDC;
+	else
+		en_tdc = 0;
+
+	setting->dbtp = cpu_to_le32(FIELD_PREP(NCT6694_CANFD_SETTING_DBTP_DSJW,
+					       d_bt->sjw - 1) |
+				    FIELD_PREP(NCT6694_CANFD_SETTING_DBTP_DBRP,
+					       d_bt->brp - 1) |
+				    FIELD_PREP(NCT6694_CANFD_SETTING_DBTP_DTSEG2,
+					       d_bt->phase_seg2 - 1) |
+				    FIELD_PREP(NCT6694_CANFD_SETTING_DBTP_DTSEG1,
+					       d_bt->prop_seg + d_bt->phase_seg1 - 1) |
+				    en_tdc);
+
+	setting->active = NCT6694_CANFD_SETTING_ACTIVE_CTRL1 |
+			  NCT6694_CANFD_SETTING_ACTIVE_CTRL2 |
+			  NCT6694_CANFD_SETTING_ACTIVE_NBTP_DBTP;
+
+	ret = nct6694_write_msg(priv->nct6694, &cmd_hd, setting);
+	if (ret)
+		return ret;
+
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	return 0;
+}
+
+static void nct6694_canfd_stop(struct net_device *ndev)
+{
+	struct nct6694_canfd_priv *priv = netdev_priv(ndev);
+	struct nct6694_canfd_setting *setting __free(kfree) = NULL;
+	const struct nct6694_cmd_header cmd_hd = {
+		.mod = NCT6694_CANFD_MOD,
+		.cmd = NCT6694_CANFD_SETTING,
+		.sel = ndev->dev_port,
+		.len = cpu_to_le16(sizeof(*setting))
+	};
+
+	/* The NCT6694 cannot be stopped. To ensure safe operation and avoid
+	 * interference, the control mode is set to Listen-Only mode. This
+	 * mode allows the device to monitor bus activity without actively
+	 * participating in communication.
+	 */
+	setting = kzalloc_obj(*setting);
+	if (!setting)
+		return;
+
+	nct6694_read_msg(priv->nct6694, &cmd_hd, setting);
+	setting->ctrl1 = cpu_to_le16(NCT6694_CANFD_SETTING_CTRL1_MON);
+	setting->active = NCT6694_CANFD_SETTING_ACTIVE_CTRL1;
+	nct6694_write_msg(priv->nct6694, &cmd_hd, setting);
+
+	priv->can.state = CAN_STATE_STOPPED;
+}
+
+static int nct6694_canfd_close(struct net_device *ndev)
+{
+	struct nct6694_canfd_priv *priv = netdev_priv(ndev);
+
+	netif_stop_queue(ndev);
+	nct6694_canfd_stop(ndev);
+	destroy_workqueue(priv->wq);
+	free_irq(ndev->irq, ndev);
+	can_rx_offload_disable(&priv->offload);
+	close_candev(ndev);
+	return 0;
+}
+
+static int nct6694_canfd_set_mode(struct net_device *ndev, enum can_mode mode)
+{
+	int ret;
+
+	switch (mode) {
+	case CAN_MODE_START:
+		ret = nct6694_canfd_start(ndev);
+		if (ret)
+			return ret;
+
+		netif_wake_queue(ndev);
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return ret;
+}
+
+static int nct6694_canfd_open(struct net_device *ndev)
+{
+	struct nct6694_canfd_priv *priv = netdev_priv(ndev);
+	int ret;
+
+	ret = open_candev(ndev);
+	if (ret)
+		return ret;
+
+	can_rx_offload_enable(&priv->offload);
+
+	ret = request_threaded_irq(ndev->irq, NULL,
+				   nct6694_canfd_irq, IRQF_ONESHOT,
+				   "nct6694_canfd", ndev);
+	if (ret) {
+		netdev_err(ndev, "Failed to request IRQ\n");
+		goto can_rx_offload_disable;
+	}
+
+	priv->wq = alloc_ordered_workqueue("%s-nct6694_wq",
+					   WQ_FREEZABLE | WQ_MEM_RECLAIM,
+					   ndev->name);
+	if (!priv->wq) {
+		ret = -ENOMEM;
+		goto free_irq;
+	}
+
+	ret = nct6694_canfd_start(ndev);
+	if (ret)
+		goto destroy_wq;
+
+	netif_start_queue(ndev);
+
+	return 0;
+
+destroy_wq:
+	destroy_workqueue(priv->wq);
+free_irq:
+	free_irq(ndev->irq, ndev);
+can_rx_offload_disable:
+	can_rx_offload_disable(&priv->offload);
+	close_candev(ndev);
+	return ret;
+}
+
+static const struct net_device_ops nct6694_canfd_netdev_ops = {
+	.ndo_open = nct6694_canfd_open,
+	.ndo_stop = nct6694_canfd_close,
+	.ndo_start_xmit = nct6694_canfd_start_xmit,
+};
+
+static const struct ethtool_ops nct6694_canfd_ethtool_ops = {
+	.get_ts_info = ethtool_op_get_ts_info,
+};
+
+static int nct6694_canfd_get_clock(struct nct6694_canfd_priv *priv)
+{
+	struct nct6694_canfd_information *info __free(kfree) = NULL;
+	static const struct nct6694_cmd_header cmd_hd = {
+		.mod = NCT6694_CANFD_MOD,
+		.cmd = NCT6694_CANFD_INFORMATION,
+		.sel = NCT6694_CANFD_INFORMATION_SEL,
+		.len = cpu_to_le16(sizeof(*info))
+	};
+	int ret;
+
+	info = kzalloc_obj(*info);
+	if (!info)
+		return -ENOMEM;
+
+	ret = nct6694_read_msg(priv->nct6694, &cmd_hd, info);
+	if (ret)
+		return ret;
+
+	return le32_to_cpu(info->can_clk);
+}
+
+static int nct6694_canfd_probe(struct platform_device *pdev)
+{
+	struct nct6694 *nct6694 = dev_get_drvdata(pdev->dev.parent);
+	struct nct6694_canfd_priv *priv;
+	struct net_device *ndev;
+	int port, irq, ret, can_clk;
+
+	port = ida_alloc(&nct6694->canfd_ida, GFP_KERNEL);
+	if (port < 0)
+		return port;
+
+	irq = irq_create_mapping(nct6694->domain,
+				 NCT6694_IRQ_CAN0 + port);
+	if (!irq) {
+		ret = -EINVAL;
+		goto free_ida;
+	}
+
+	ndev = alloc_candev(sizeof(struct nct6694_canfd_priv), 1);
+	if (!ndev) {
+		ret = -ENOMEM;
+		goto dispose_irq;
+	}
+
+	ndev->irq = irq;
+	ndev->flags |= IFF_ECHO;
+	ndev->dev_port = port;
+	ndev->netdev_ops = &nct6694_canfd_netdev_ops;
+	ndev->ethtool_ops = &nct6694_canfd_ethtool_ops;
+
+	priv = netdev_priv(ndev);
+	priv->nct6694 = nct6694;
+	priv->ndev = ndev;
+
+	can_clk = nct6694_canfd_get_clock(priv);
+	if (can_clk < 0) {
+		ret = dev_err_probe(&pdev->dev, can_clk,
+				    "Failed to get clock\n");
+		goto free_candev;
+	}
+
+	INIT_WORK(&priv->tx_work, nct6694_canfd_tx_work);
+
+	priv->can.clock.freq = can_clk;
+	priv->can.bittiming_const = &nct6694_canfd_bittiming_nominal_const;
+	priv->can.fd.data_bittiming_const = &nct6694_canfd_bittiming_data_const;
+	priv->can.do_set_mode = nct6694_canfd_set_mode;
+	priv->can.do_get_berr_counter = nct6694_canfd_get_berr_counter;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
+		CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_BERR_REPORTING |
+		CAN_CTRLMODE_FD_NON_ISO;
+
+	ret = can_set_static_ctrlmode(ndev, CAN_CTRLMODE_FD);
+	if (ret)
+		goto free_candev;
+
+	ret = can_rx_offload_add_manual(ndev, &priv->offload,
+					NCT6694_NAPI_WEIGHT);
+	if (ret) {
+		dev_err_probe(&pdev->dev, ret, "Failed to add rx_offload\n");
+		goto free_candev;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	SET_NETDEV_DEV(priv->ndev, &pdev->dev);
+
+	ret = register_candev(priv->ndev);
+	if (ret)
+		goto rx_offload_del;
+
+	return 0;
+
+rx_offload_del:
+	can_rx_offload_del(&priv->offload);
+free_candev:
+	free_candev(ndev);
+dispose_irq:
+	irq_dispose_mapping(irq);
+free_ida:
+	ida_free(&nct6694->canfd_ida, port);
+	return ret;
+}
+
+static void nct6694_canfd_remove(struct platform_device *pdev)
+{
+	struct nct6694_canfd_priv *priv = platform_get_drvdata(pdev);
+	struct nct6694 *nct6694 = priv->nct6694;
+	struct net_device *ndev = priv->ndev;
+	int port = ndev->dev_port;
+	int irq = ndev->irq;
+
+	unregister_candev(ndev);
+	can_rx_offload_del(&priv->offload);
+	free_candev(ndev);
+	irq_dispose_mapping(irq);
+	ida_free(&nct6694->canfd_ida, port);
+}
+
+static struct platform_driver nct6694_canfd_driver = {
+	.driver = {
+		.name	= DEVICE_NAME,
+	},
+	.probe		= nct6694_canfd_probe,
+	.remove		= nct6694_canfd_remove,
+};
+
+module_platform_driver(nct6694_canfd_driver);
+
+MODULE_DESCRIPTION("USB-CAN FD driver for NCT6694");
+MODULE_AUTHOR("Ming Yu <tmyu0@nuvoton.com>");
+MODULE_LICENSE("GPL");

linux-7.2.3/drivers/net/can/usb/peak_usb/Makefile

@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CAN_PEAK_USB) += peak_usb.o
+peak_usb-y = pcan_usb_core.o pcan_usb.o pcan_usb_pro.o pcan_usb_fd.o

linux-7.2.3/drivers/net/can/usb/peak_usb/pcan_usb_core.h

@@ -0,0 +1,156 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * CAN driver for PEAK System USB adapters
+ * Derived from the PCAN project file driver/src/pcan_usb_core.c
+ *
+ * Copyright (C) 2003-2025 PEAK System-Technik GmbH
+ * Author: Stéphane Grosjean <s.grosjean@peak-system.fr>
+ *
+ * Many thanks to Klaus Hitschler <klaus.hitschler@gmx.de>
+ */
+#ifndef PCAN_USB_CORE_H
+#define PCAN_USB_CORE_H
+
+/* PEAK-System vendor id. */
+#define PCAN_USB_VENDOR_ID		0x0c72
+
+/* supported device ids. */
+#define PCAN_USB_PRODUCT_ID		0x000c
+#define PCAN_USBPRO_PRODUCT_ID		0x000d
+#define PCAN_USBPROFD_PRODUCT_ID	0x0011
+#define PCAN_USBFD_PRODUCT_ID		0x0012
+#define PCAN_USBCHIP_PRODUCT_ID		0x0013
+#define PCAN_USBX6_PRODUCT_ID		0x0014
+
+#define PCAN_USB_DRIVER_NAME		"peak_usb"
+
+/* number of urbs that are submitted for rx/tx per channel */
+#define PCAN_USB_MAX_RX_URBS		4
+#define PCAN_USB_MAX_TX_URBS		10
+
+/* usb adapters maximum channels per usb interface */
+#define PCAN_USB_MAX_CHANNEL		2
+
+/* maximum length of the usb commands sent to/received from the devices */
+#define PCAN_USB_MAX_CMD_LEN		32
+
+struct peak_usb_device;
+
+/* PEAK-System USB adapter descriptor */
+struct peak_usb_adapter {
+	char *name;
+	u32 device_id;
+	u32 ctrlmode_supported;
+	struct can_clock clock;
+	const struct can_bittiming_const * const bittiming_const;
+	const struct can_bittiming_const * const data_bittiming_const;
+	unsigned int ctrl_count;
+
+	const struct ethtool_ops *ethtool_ops;
+
+	int (*intf_probe)(struct usb_interface *intf);
+
+	int (*dev_init)(struct peak_usb_device *dev);
+	void (*dev_exit)(struct peak_usb_device *dev);
+	void (*dev_free)(struct peak_usb_device *dev);
+	int (*dev_open)(struct peak_usb_device *dev);
+	int (*dev_close)(struct peak_usb_device *dev);
+	int (*dev_set_bittiming)(struct peak_usb_device *dev,
+					struct can_bittiming *bt);
+	int (*dev_set_data_bittiming)(struct peak_usb_device *dev,
+				      struct can_bittiming *bt);
+	int (*dev_set_bus)(struct peak_usb_device *dev, u8 onoff);
+	int (*dev_get_can_channel_id)(struct peak_usb_device *dev, u32 *can_ch_id);
+	int (*dev_set_can_channel_id)(struct peak_usb_device *dev, u32 can_ch_id);
+	int (*dev_decode_buf)(struct peak_usb_device *dev, struct urb *urb);
+	int (*dev_encode_msg)(struct peak_usb_device *dev, struct sk_buff *skb,
+					u8 *obuf, size_t *size);
+	int (*dev_start)(struct peak_usb_device *dev);
+	int (*dev_stop)(struct peak_usb_device *dev);
+	int (*dev_restart_async)(struct peak_usb_device *dev, struct urb *urb,
+					u8 *buf);
+	int (*do_get_berr_counter)(const struct net_device *netdev,
+				   struct can_berr_counter *bec);
+	u8 ep_msg_in;
+	u8 ep_msg_out[PCAN_USB_MAX_CHANNEL];
+	u8 ts_used_bits;
+	u8 us_per_ts_shift;
+	u32 us_per_ts_scale;
+
+	int rx_buffer_size;
+	int tx_buffer_size;
+	int sizeof_dev_private;
+};
+
+extern const struct peak_usb_adapter pcan_usb;
+extern const struct peak_usb_adapter pcan_usb_pro;
+extern const struct peak_usb_adapter pcan_usb_fd;
+extern const struct peak_usb_adapter pcan_usb_chip;
+extern const struct peak_usb_adapter pcan_usb_pro_fd;
+extern const struct peak_usb_adapter pcan_usb_x6;
+
+struct peak_time_ref {
+	ktime_t tv_host_0, tv_host;
+	u32 ts_dev_1, ts_dev_2;
+	u64 ts_total;
+	u32 tick_count;
+	const struct peak_usb_adapter *adapter;
+};
+
+struct peak_tx_urb_context {
+	struct peak_usb_device *dev;
+	u32 echo_index;
+	struct urb *urb;
+};
+
+#define PCAN_USB_STATE_CONNECTED	0x00000001
+#define PCAN_USB_STATE_STARTED		0x00000002
+
+/* PEAK-System USB device */
+struct peak_usb_device {
+	struct can_priv can;
+	const struct peak_usb_adapter *adapter;
+	unsigned int ctrl_idx;
+	u32 state;
+
+	struct usb_device *udev;
+	struct net_device *netdev;
+
+	atomic_t active_tx_urbs;
+	struct usb_anchor tx_submitted;
+	struct peak_tx_urb_context tx_contexts[PCAN_USB_MAX_TX_URBS];
+
+	u8 *cmd_buf;
+	struct usb_anchor rx_submitted;
+
+	/* equivalent to the device ID in the Windows API */
+	u32 can_channel_id;
+	u8 device_rev;
+
+	u8 ep_msg_in;
+	u8 ep_msg_out;
+
+	struct peak_usb_device *prev_siblings;
+	struct peak_usb_device *next_siblings;
+};
+
+void pcan_dump_mem(const char *prompt, const void *p, int l);
+
+/* common timestamp management */
+void peak_usb_init_time_ref(struct peak_time_ref *time_ref,
+			    const struct peak_usb_adapter *adapter);
+void peak_usb_update_ts_now(struct peak_time_ref *time_ref, u32 ts_now);
+void peak_usb_set_ts_now(struct peak_time_ref *time_ref, u32 ts_now);
+void peak_usb_get_ts_time(struct peak_time_ref *time_ref, u32 ts, ktime_t *tv);
+int peak_usb_netif_rx_64(struct sk_buff *skb, u32 ts_low, u32 ts_high);
+void peak_usb_async_complete(struct urb *urb);
+void peak_usb_restart_complete(struct peak_usb_device *dev);
+int pcan_get_ts_info(struct net_device *dev, struct kernel_ethtool_ts_info *info);
+
+/* common 32-bit CAN channel ID ethtool management */
+int peak_usb_get_eeprom_len(struct net_device *netdev);
+int peak_usb_get_eeprom(struct net_device *netdev,
+			struct ethtool_eeprom *eeprom, u8 *data);
+int peak_usb_set_eeprom(struct net_device *netdev,
+			struct ethtool_eeprom *eeprom, u8 *data);
+#endif

linux-7.2.3/drivers/net/can/usb/peak_usb/pcan_usb_pro.h

@@ -0,0 +1,191 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * CAN driver for PEAK System PCAN-USB Pro adapter
+ * Derived from the PCAN project file driver/src/pcan_usbpro_fw.h
+ *
+ * Copyright (C) 2003-2025 PEAK System-Technik GmbH
+ * Author: Stéphane Grosjean <s.grosjean@peak-system.fr>
+ */
+#ifndef PCAN_USB_PRO_H
+#define PCAN_USB_PRO_H
+
+/*
+ * USB Vendor request data types
+ */
+#define PCAN_USBPRO_REQ_INFO		0
+#define PCAN_USBPRO_REQ_FCT		2
+
+/* Vendor Request value for XXX_INFO */
+#define PCAN_USBPRO_INFO_BL		0
+#define PCAN_USBPRO_INFO_FW		1
+
+/* PCAN-USB Pro (FD) Endpoints */
+#define PCAN_USBPRO_EP_CMDOUT		1
+#define PCAN_USBPRO_EP_CMDIN		(PCAN_USBPRO_EP_CMDOUT | USB_DIR_IN)
+#define PCAN_USBPRO_EP_MSGOUT_0		2
+#define PCAN_USBPRO_EP_MSGIN		(PCAN_USBPRO_EP_MSGOUT_0 | USB_DIR_IN)
+#define PCAN_USBPRO_EP_MSGOUT_1		3
+#define PCAN_USBPRO_EP_UNUSED		(PCAN_USBPRO_EP_MSGOUT_1 | USB_DIR_IN)
+
+/* Vendor Request value for XXX_FCT */
+#define PCAN_USBPRO_FCT_DRVLD		5 /* tell device driver is loaded */
+#define PCAN_USBPRO_FCT_DRVLD_REQ_LEN	16
+
+/* PCAN_USBPRO_INFO_BL vendor request record type */
+struct __packed pcan_usb_pro_blinfo {
+	__le32 ctrl_type;
+	u8 version[4];
+	u8 day;
+	u8 month;
+	u8 year;
+	u8 dummy;
+	__le32 serial_num_hi;
+	__le32 serial_num_lo;
+	__le32 hw_type;
+	__le32 hw_rev;
+};
+
+/* PCAN_USBPRO_INFO_FW vendor request record type */
+struct __packed pcan_usb_pro_fwinfo {
+	__le32 ctrl_type;
+	u8 version[4];
+	u8 day;
+	u8 month;
+	u8 year;
+	u8 dummy;
+	__le32 fw_type;
+};
+
+/*
+ * USB Command record types
+ */
+#define PCAN_USBPRO_SETBTR	0x02
+#define PCAN_USBPRO_SETBUSACT	0x04
+#define PCAN_USBPRO_SETSILENT	0x05
+#define PCAN_USBPRO_SETDEVID	0x06
+#define PCAN_USBPRO_SETFILTR	0x0a
+#define PCAN_USBPRO_SETTS	0x10
+#define PCAN_USBPRO_GETDEVID	0x12
+#define PCAN_USBPRO_SETLED	0x1C
+#define PCAN_USBPRO_RXMSG8	0x80
+#define PCAN_USBPRO_RXMSG4	0x81
+#define PCAN_USBPRO_RXMSG0	0x82
+#define PCAN_USBPRO_RXRTR	0x83
+#define PCAN_USBPRO_RXSTATUS	0x84
+#define PCAN_USBPRO_RXTS	0x85
+#define PCAN_USBPRO_TXMSG8	0x41
+#define PCAN_USBPRO_TXMSG4	0x42
+#define PCAN_USBPRO_TXMSG0	0x43
+
+/* record structures */
+struct __packed pcan_usb_pro_btr {
+	u8 data_type;
+	u8 channel;
+	__le16 dummy;
+	__le32 CCBT;
+};
+
+struct __packed pcan_usb_pro_busact {
+	u8 data_type;
+	u8 channel;
+	__le16 onoff;
+};
+
+struct __packed pcan_usb_pro_silent {
+	u8 data_type;
+	u8 channel;
+	__le16 onoff;
+};
+
+struct __packed pcan_usb_pro_filter {
+	u8 data_type;
+	u8 dummy;
+	__le16 filter_mode;
+};
+
+struct __packed pcan_usb_pro_setts {
+	u8 data_type;
+	u8 dummy;
+	__le16 mode;
+};
+
+struct __packed pcan_usb_pro_devid {
+	u8 data_type;
+	u8 channel;
+	__le16 dummy;
+	__le32 dev_num;
+};
+
+#define PCAN_USBPRO_LED_DEVICE		0x00
+#define PCAN_USBPRO_LED_BLINK_FAST	0x01
+#define PCAN_USBPRO_LED_BLINK_SLOW	0x02
+#define PCAN_USBPRO_LED_ON		0x03
+#define PCAN_USBPRO_LED_OFF		0x04
+
+struct __packed pcan_usb_pro_setled {
+	u8 data_type;
+	u8 channel;
+	__le16 mode;
+	__le32 timeout;
+};
+
+struct __packed pcan_usb_pro_rxmsg {
+	u8 data_type;
+	u8 client;
+	u8 flags;
+	u8 len;
+	__le32 ts32;
+	__le32 id;
+
+	u8 data[8];
+};
+
+#define PCAN_USBPRO_STATUS_ERROR	0x0001
+#define PCAN_USBPRO_STATUS_BUS		0x0002
+#define PCAN_USBPRO_STATUS_OVERRUN	0x0004
+#define PCAN_USBPRO_STATUS_QOVERRUN	0x0008
+
+struct __packed pcan_usb_pro_rxstatus {
+	u8 data_type;
+	u8 channel;
+	__le16 status;
+	__le32 ts32;
+	__le32 err_frm;
+};
+
+struct __packed pcan_usb_pro_rxts {
+	u8 data_type;
+	u8 dummy[3];
+	__le32 ts64[2];
+};
+
+struct __packed pcan_usb_pro_txmsg {
+	u8 data_type;
+	u8 client;
+	u8 flags;
+	u8 len;
+	__le32 id;
+	u8 data[8];
+};
+
+union pcan_usb_pro_rec {
+	u8				data_type;
+	struct pcan_usb_pro_btr		btr;
+	struct pcan_usb_pro_busact	bus_act;
+	struct pcan_usb_pro_silent	silent_mode;
+	struct pcan_usb_pro_filter	filter_mode;
+	struct pcan_usb_pro_setts	ts;
+	struct pcan_usb_pro_devid	dev_id;
+	struct pcan_usb_pro_setled	set_led;
+	struct pcan_usb_pro_rxmsg	rx_msg;
+	struct pcan_usb_pro_rxstatus	rx_status;
+	struct pcan_usb_pro_rxts	rx_ts;
+	struct pcan_usb_pro_txmsg	tx_msg;
+};
+
+int pcan_usb_pro_probe(struct usb_interface *intf);
+int pcan_usb_pro_send_req(struct peak_usb_device *dev, int req_id,
+			  int req_value, void *req_addr, int req_size);
+void pcan_usb_pro_restart_complete(struct urb *urb);
+
+#endif