Resguardo inicial

linux-7.2.3/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_hal.h

@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ */
+
+/*
+ * phy_hal.h:  functionality exported from the phy to higher layers
+ */
+
+#ifndef _BRCM_PHY_HAL_H_
+#define _BRCM_PHY_HAL_H_
+
+#include <brcmu_utils.h>
+#include <brcmu_wifi.h>
+#include <phy_shim.h>
+
+#define	IDCODE_VER_MASK		0x0000000f
+#define	IDCODE_VER_SHIFT	0
+#define	IDCODE_MFG_MASK		0x00000fff
+#define	IDCODE_MFG_SHIFT	0
+#define	IDCODE_ID_MASK		0x0ffff000
+#define	IDCODE_ID_SHIFT		12
+#define	IDCODE_REV_MASK		0xf0000000
+#define	IDCODE_REV_SHIFT	28
+
+#define	NORADIO_ID		0xe4f5
+#define	NORADIO_IDCODE		0x4e4f5246
+
+#define BCM2055_ID		0x2055
+#define BCM2055_IDCODE		0x02055000
+#define BCM2055A0_IDCODE	0x1205517f
+
+#define BCM2056_ID		0x2056
+#define BCM2056_IDCODE		0x02056000
+#define BCM2056A0_IDCODE	0x1205617f
+
+#define BCM2057_ID		0x2057
+#define BCM2057_IDCODE		0x02057000
+#define BCM2057A0_IDCODE	0x1205717f
+
+#define BCM2064_ID		0x2064
+#define BCM2064_IDCODE		0x02064000
+#define BCM2064A0_IDCODE	0x0206417f
+
+#define PHY_TPC_HW_OFF		false
+#define PHY_TPC_HW_ON		true
+
+#define PHY_PERICAL_DRIVERUP	1
+#define PHY_PERICAL_WATCHDOG	2
+#define PHY_PERICAL_PHYINIT	3
+#define PHY_PERICAL_JOIN_BSS	4
+#define PHY_PERICAL_START_IBSS	5
+#define PHY_PERICAL_UP_BSS	6
+#define PHY_PERICAL_CHAN	7
+#define PHY_FULLCAL	8
+
+#define PHY_PERICAL_DISABLE	0
+#define PHY_PERICAL_SPHASE	1
+#define PHY_PERICAL_MPHASE	2
+#define PHY_PERICAL_MANUAL	3
+
+#define PHY_HOLD_FOR_ASSOC	1
+#define PHY_HOLD_FOR_SCAN	2
+#define PHY_HOLD_FOR_RM		4
+#define PHY_HOLD_FOR_PLT	8
+#define PHY_HOLD_FOR_MUTE	16
+#define PHY_HOLD_FOR_NOT_ASSOC 0x20
+
+#define PHY_MUTE_FOR_PREISM	1
+#define PHY_MUTE_ALL		0xffffffff
+
+#define PHY_NOISE_FIXED_VAL		(-95)
+#define PHY_NOISE_FIXED_VAL_NPHY	(-92)
+#define PHY_NOISE_FIXED_VAL_LCNPHY	(-92)
+
+#define PHY_MODE_CAL		0x0002
+#define PHY_MODE_NOISEM		0x0004
+
+#define BRCMS_TXPWR_DB_FACTOR	4
+
+/* a large TX Power as an init value to factor out of min() calculations,
+ * keep low enough to fit in an s8, units are .25 dBm
+ */
+#define BRCMS_TXPWR_MAX		(127)	/* ~32 dBm = 1,500 mW */
+
+#define BRCMS_NUM_RATES_CCK           4
+#define BRCMS_NUM_RATES_OFDM          8
+#define BRCMS_NUM_RATES_MCS_1_STREAM  8
+#define BRCMS_NUM_RATES_MCS_2_STREAM  8
+#define BRCMS_NUM_RATES_MCS_3_STREAM  8
+#define BRCMS_NUM_RATES_MCS_4_STREAM  8
+
+#define	BRCMS_RSSI_INVALID	 0	/* invalid RSSI value */
+
+struct d11regs;
+struct phy_shim_info;
+
+struct txpwr_limits {
+	u8 cck[BRCMS_NUM_RATES_CCK];
+	u8 ofdm[BRCMS_NUM_RATES_OFDM];
+
+	u8 ofdm_cdd[BRCMS_NUM_RATES_OFDM];
+
+	u8 ofdm_40_siso[BRCMS_NUM_RATES_OFDM];
+	u8 ofdm_40_cdd[BRCMS_NUM_RATES_OFDM];
+
+	u8 mcs_20_siso[BRCMS_NUM_RATES_MCS_1_STREAM];
+	u8 mcs_20_cdd[BRCMS_NUM_RATES_MCS_1_STREAM];
+	u8 mcs_20_stbc[BRCMS_NUM_RATES_MCS_1_STREAM];
+	u8 mcs_20_mimo[BRCMS_NUM_RATES_MCS_2_STREAM];
+
+	u8 mcs_40_siso[BRCMS_NUM_RATES_MCS_1_STREAM];
+	u8 mcs_40_cdd[BRCMS_NUM_RATES_MCS_1_STREAM];
+	u8 mcs_40_stbc[BRCMS_NUM_RATES_MCS_1_STREAM];
+	u8 mcs_40_mimo[BRCMS_NUM_RATES_MCS_2_STREAM];
+	u8 mcs32;
+};
+
+struct tx_power {
+	u32 flags;
+	u16 chanspec;   /* txpwr report for this channel */
+	u16 local_chanspec;     /* channel on which we are associated */
+	u8 local_max;   /* local max according to the AP */
+	u8 local_constraint;    /* local constraint according to the AP */
+	s8 antgain[2];  /* Ant gain for each band - from SROM */
+	u8 rf_cores;            /* count of RF Cores being reported */
+	u8 est_Pout[4]; /* Latest tx power out estimate per RF chain */
+	u8 est_Pout_act[4];     /* Latest tx power out estimate per RF chain
+				 * without adjustment */
+	u8 est_Pout_cck;        /* Latest CCK tx power out estimate */
+	u8 tx_power_max[4];     /* Maximum target power among all rates */
+	/* Index of the rate with the max target power */
+	u8 tx_power_max_rate_ind[4];
+	/* User limit */
+	u8 user_limit[WL_TX_POWER_RATES];
+	/* Regulatory power limit */
+	u8 reg_limit[WL_TX_POWER_RATES];
+	/* Max power board can support (SROM) */
+	u8 board_limit[WL_TX_POWER_RATES];
+	/* Latest target power */
+	u8 target[WL_TX_POWER_RATES];
+};
+
+struct brcms_chanvec {
+	u8 vec[MAXCHANNEL / NBBY];
+};
+
+struct shared_phy_params {
+	struct si_pub *sih;
+	struct phy_shim_info *physhim;
+	uint unit;
+	uint corerev;
+	u16 vid;
+	u16 did;
+	uint chip;
+	uint chiprev;
+	uint chippkg;
+	uint sromrev;
+	uint boardtype;
+	uint boardrev;
+	u32 boardflags;
+	u32 boardflags2;
+};
+
+
+struct shared_phy *wlc_phy_shared_attach(struct shared_phy_params *shp);
+struct brcms_phy_pub *wlc_phy_attach(struct shared_phy *sh,
+				     struct bcma_device *d11core, int bandtype,
+				     struct wiphy *wiphy);
+void wlc_phy_detach(struct brcms_phy_pub *ppi);
+
+bool wlc_phy_get_phyversion(struct brcms_phy_pub *pih, u16 *phytype,
+			    u16 *phyrev, u16 *radioid, u16 *radiover);
+bool wlc_phy_get_encore(struct brcms_phy_pub *pih);
+u32 wlc_phy_get_coreflags(struct brcms_phy_pub *pih);
+
+void wlc_phy_hw_clk_state_upd(struct brcms_phy_pub *ppi, bool newstate);
+void wlc_phy_hw_state_upd(struct brcms_phy_pub *ppi, bool newstate);
+void wlc_phy_init(struct brcms_phy_pub *ppi, u16 chanspec);
+void wlc_phy_watchdog(struct brcms_phy_pub *ppi);
+int wlc_phy_down(struct brcms_phy_pub *ppi);
+u32 wlc_phy_clk_bwbits(struct brcms_phy_pub *pih);
+void wlc_phy_cal_init(struct brcms_phy_pub *ppi);
+void wlc_phy_antsel_init(struct brcms_phy_pub *ppi, bool lut_init);
+
+void wlc_phy_chanspec_set(struct brcms_phy_pub *ppi, u16 chanspec);
+u16 wlc_phy_chanspec_get(struct brcms_phy_pub *ppi);
+void wlc_phy_chanspec_radio_set(struct brcms_phy_pub *ppi, u16 newch);
+void wlc_phy_bw_state_set(struct brcms_phy_pub *ppi, u16 bw);
+
+int wlc_phy_rssi_compute(struct brcms_phy_pub *pih, struct d11rxhdr *rxh);
+void wlc_phy_por_inform(struct brcms_phy_pub *ppi);
+void wlc_phy_noise_sample_intr(struct brcms_phy_pub *ppi);
+bool wlc_phy_bist_check_phy(struct brcms_phy_pub *ppi);
+
+void wlc_phy_switch_radio(struct brcms_phy_pub *ppi, bool on);
+void wlc_phy_anacore(struct brcms_phy_pub *ppi, bool on);
+
+void wlc_phy_chanspec_ch14_widefilter_set(struct brcms_phy_pub *ppi,
+					  bool wide_filter);
+void wlc_phy_chanspec_band_validch(struct brcms_phy_pub *ppi, uint band,
+				   struct brcms_chanvec *channels);
+
+void wlc_phy_txpower_sromlimit(struct brcms_phy_pub *ppi, uint chan, u8 *_min_,
+			       u8 *_max_, int rate);
+void wlc_phy_txpower_limit_set(struct brcms_phy_pub *ppi, struct txpwr_limits *,
+			       u16 chanspec);
+int wlc_phy_txpower_get(struct brcms_phy_pub *ppi, uint *qdbm, bool *override);
+int wlc_phy_txpower_set(struct brcms_phy_pub *ppi, uint qdbm, bool override);
+void wlc_phy_txpower_target_set(struct brcms_phy_pub *ppi,
+				struct txpwr_limits *);
+bool wlc_phy_txpower_hw_ctrl_get(struct brcms_phy_pub *ppi);
+
+void wlc_phy_stf_chain_init(struct brcms_phy_pub *pih, u8 txchain, u8 rxchain);
+void wlc_phy_stf_chain_set(struct brcms_phy_pub *pih, u8 txchain, u8 rxchain);
+u8 wlc_phy_stf_chain_active_get(struct brcms_phy_pub *pih);
+void wlc_phy_ldpc_override_set(struct brcms_phy_pub *ppi, bool val);
+
+void wlc_phy_cal_perical(struct brcms_phy_pub *ppi, u8 reason);
+void wlc_phy_cal_papd_recal(struct brcms_phy_pub *ppi);
+
+void wlc_phy_ant_rxdiv_set(struct brcms_phy_pub *ppi, u8 val);
+void wlc_phy_hold_upd(struct brcms_phy_pub *ppi, u32 id, bool val);
+void wlc_phy_mute_upd(struct brcms_phy_pub *ppi, bool val, u32 flags);
+
+void wlc_phy_antsel_type_set(struct brcms_phy_pub *ppi, u8 antsel_type);
+
+void wlc_phy_txpower_get_current(struct brcms_phy_pub *ppi,
+				 struct tx_power *power, uint channel);
+
+void wlc_phy_initcal_enable(struct brcms_phy_pub *pih, bool initcal);
+void wlc_phy_ofdm_rateset_war(struct brcms_phy_pub *pih, bool war);
+void wlc_phy_bf_preempt_enable(struct brcms_phy_pub *pih, bool bf_preempt);
+void wlc_phy_machwcap_set(struct brcms_phy_pub *ppi, u32 machwcap);
+
+const u8 *wlc_phy_get_ofdm_rate_lookup(void);
+
+s8 wlc_phy_get_tx_power_offset_by_mcs(struct brcms_phy_pub *ppi,
+				      u8 mcs_offset);
+s8 wlc_phy_get_tx_power_offset(struct brcms_phy_pub *ppi, u8 tbl_offset);
+#endif                          /* _BRCM_PHY_HAL_H_ */

linux-7.2.3/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.h

@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ */
+
+#ifndef _BRCM_PHY_LCN_H_
+#define _BRCM_PHY_LCN_H_
+
+#include <types.h>
+
+struct brcms_phy_lcnphy {
+	int lcnphy_txrf_sp_9_override;
+	u8 lcnphy_full_cal_channel;
+	u8 lcnphy_cal_counter;
+	u16 lcnphy_cal_temper;
+	bool lcnphy_recal;
+
+	u8 lcnphy_rc_cap;
+	u32 lcnphy_mcs20_po;
+
+	u8 lcnphy_tr_isolation_mid;
+	u8 lcnphy_tr_isolation_low;
+	u8 lcnphy_tr_isolation_hi;
+
+	u8 lcnphy_bx_arch;
+	u8 lcnphy_rx_power_offset;
+	u8 lcnphy_rssi_vf;
+	u8 lcnphy_rssi_vc;
+	u8 lcnphy_rssi_gs;
+	u8 lcnphy_tssi_val;
+	u8 lcnphy_rssi_vf_lowtemp;
+	u8 lcnphy_rssi_vc_lowtemp;
+	u8 lcnphy_rssi_gs_lowtemp;
+
+	u8 lcnphy_rssi_vf_hightemp;
+	u8 lcnphy_rssi_vc_hightemp;
+	u8 lcnphy_rssi_gs_hightemp;
+
+	s16 lcnphy_pa0b0;
+	s16 lcnphy_pa0b1;
+	s16 lcnphy_pa0b2;
+
+	u16 lcnphy_rawtempsense;
+	u8 lcnphy_measPower;
+	u8 lcnphy_tempsense_slope;
+	u8 lcnphy_freqoffset_corr;
+	u8 lcnphy_tempsense_option;
+	u8 lcnphy_tempcorrx;
+	bool lcnphy_iqcal_swp_dis;
+	bool lcnphy_hw_iqcal_en;
+	uint lcnphy_bandedge_corr;
+	bool lcnphy_spurmod;
+	u16 lcnphy_tssi_tx_cnt;
+	u16 lcnphy_tssi_idx;
+	u16 lcnphy_tssi_npt;
+
+	u16 lcnphy_target_tx_freq;
+	s8 lcnphy_tx_power_idx_override;
+	u16 lcnphy_noise_samples;
+
+	u32 lcnphy_papdRxGnIdx;
+	u32 lcnphy_papd_rxGnCtrl_init;
+
+	u32 lcnphy_gain_idx_14_lowword;
+	u32 lcnphy_gain_idx_14_hiword;
+	u32 lcnphy_gain_idx_27_lowword;
+	u32 lcnphy_gain_idx_27_hiword;
+	s16 lcnphy_ofdmgainidxtableoffset;
+	s16 lcnphy_dsssgainidxtableoffset;
+	u32 lcnphy_tr_R_gain_val;
+	u32 lcnphy_tr_T_gain_val;
+	s8 lcnphy_input_pwr_offset_db;
+	u16 lcnphy_Med_Low_Gain_db;
+	u16 lcnphy_Very_Low_Gain_db;
+	s8 lcnphy_lastsensed_temperature;
+	s8 lcnphy_pkteng_rssi_slope;
+	u8 lcnphy_saved_tx_user_target[TXP_NUM_RATES];
+	u8 lcnphy_volt_winner;
+	u8 lcnphy_volt_low;
+	u8 lcnphy_54_48_36_24mbps_backoff;
+	u8 lcnphy_11n_backoff;
+	u8 lcnphy_lowerofdm;
+	u8 lcnphy_cck;
+	u8 lcnphy_psat_2pt3_detected;
+	s32 lcnphy_lowest_Re_div_Im;
+	s8 lcnphy_final_papd_cal_idx;
+	u16 lcnphy_extstxctrl4;
+	u16 lcnphy_extstxctrl0;
+	u16 lcnphy_extstxctrl1;
+	s16 lcnphy_cck_dig_filt_type;
+	s16 lcnphy_ofdm_dig_filt_type;
+	struct lcnphy_cal_results lcnphy_cal_results;
+
+	u8 lcnphy_psat_pwr;
+	u8 lcnphy_psat_indx;
+	s32 lcnphy_min_phase;
+	u8 lcnphy_final_idx;
+	u8 lcnphy_start_idx;
+	u8 lcnphy_current_index;
+	u16 lcnphy_logen_buf_1;
+	u16 lcnphy_local_ovr_2;
+	u16 lcnphy_local_oval_6;
+	u16 lcnphy_local_oval_5;
+	u16 lcnphy_logen_mixer_1;
+
+	u8 lcnphy_aci_stat;
+	uint lcnphy_aci_start_time;
+	s8 lcnphy_tx_power_offset[TXP_NUM_RATES];
+};
+#endif				/* _BRCM_PHY_LCN_H_ */

linux-7.2.3/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_qmath.c

@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ */
+
+#include "phy_qmath.h"
+
+/*
+ * Description: This function make 16 bit unsigned multiplication.
+ * To fit the output into 16 bits the 32 bit multiplication result is right
+ * shifted by 16 bits.
+ */
+u16 qm_mulu16(u16 op1, u16 op2)
+{
+	return (u16) (((u32) op1 * (u32) op2) >> 16);
+}
+
+/*
+ * Description: This function make 16 bit multiplication and return the result
+ * in 16 bits. To fit the multiplication result into 16 bits the multiplication
+ * result is right shifted by 15 bits. Right shifting 15 bits instead of 16 bits
+ * is done to remove the extra sign bit formed due to the multiplication.
+ * When both the 16bit inputs are 0x8000 then the output is saturated to
+ * 0x7fffffff.
+ */
+s16 qm_muls16(s16 op1, s16 op2)
+{
+	s32 result;
+	if (op1 == (s16) 0x8000 && op2 == (s16) 0x8000)
+		result = 0x7fffffff;
+	else
+		result = ((s32) (op1) * (s32) (op2));
+
+	return (s16) (result >> 15);
+}
+
+/*
+ * Description: This function add two 32 bit numbers and return the 32bit
+ * result. If the result overflow 32 bits, the output will be saturated to
+ * 32bits.
+ */
+s32 qm_add32(s32 op1, s32 op2)
+{
+	s32 result;
+	result = op1 + op2;
+	if (op1 < 0 && op2 < 0 && result > 0)
+		result = 0x80000000;
+	else if (op1 > 0 && op2 > 0 && result < 0)
+		result = 0x7fffffff;
+
+	return result;
+}
+
+/*
+ * Description: This function add two 16 bit numbers and return the 16bit
+ * result. If the result overflow 16 bits, the output will be saturated to
+ * 16bits.
+ */
+s16 qm_add16(s16 op1, s16 op2)
+{
+	s16 result;
+	s32 temp = (s32) op1 + (s32) op2;
+	if (temp > (s32) 0x7fff)
+		result = (s16) 0x7fff;
+	else if (temp < (s32) 0xffff8000)
+		result = (s16) 0xffff8000;
+	else
+		result = (s16) temp;
+
+	return result;
+}
+
+/*
+ * Description: This function make 16 bit subtraction and return the 16bit
+ * result. If the result overflow 16 bits, the output will be saturated to
+ * 16bits.
+ */
+s16 qm_sub16(s16 op1, s16 op2)
+{
+	s16 result;
+	s32 temp = (s32) op1 - (s32) op2;
+	if (temp > (s32) 0x7fff)
+		result = (s16) 0x7fff;
+	else if (temp < (s32) 0xffff8000)
+		result = (s16) 0xffff8000;
+	else
+		result = (s16) temp;
+
+	return result;
+}
+
+/*
+ * Description: This function make a 32 bit saturated left shift when the
+ * specified shift is +ve. This function will make a 32 bit right shift when
+ * the specified shift is -ve. This function return the result after shifting
+ * operation.
+ */
+s32 qm_shl32(s32 op, int shift)
+{
+	int i;
+	s32 result;
+	result = op;
+	if (shift > 31)
+		shift = 31;
+	else if (shift < -31)
+		shift = -31;
+	if (shift >= 0) {
+		for (i = 0; i < shift; i++)
+			result = qm_add32(result, result);
+	} else {
+		result = result >> (-shift);
+	}
+
+	return result;
+}
+
+/*
+ * Description: This function make a 16 bit saturated left shift when the
+ * specified shift is +ve. This function will make a 16 bit right shift when
+ * the specified shift is -ve. This function return the result after shifting
+ * operation.
+ */
+s16 qm_shl16(s16 op, int shift)
+{
+	int i;
+	s16 result;
+	result = op;
+	if (shift > 15)
+		shift = 15;
+	else if (shift < -15)
+		shift = -15;
+	if (shift > 0) {
+		for (i = 0; i < shift; i++)
+			result = qm_add16(result, result);
+	} else {
+		result = result >> (-shift);
+	}
+
+	return result;
+}
+
+/*
+ * Description: This function make a 16 bit right shift when shift is +ve.
+ * This function make a 16 bit saturated left shift when shift is -ve. This
+ * function return the result of the shift operation.
+ */
+s16 qm_shr16(s16 op, int shift)
+{
+	return qm_shl16(op, -shift);
+}
+
+/*
+ * Description: This function return the number of redundant sign bits in a
+ * 32 bit number. Example: qm_norm32(0x00000080) = 23
+ */
+s16 qm_norm32(s32 op)
+{
+	u16 u16extraSignBits;
+	if (op == 0) {
+		return 31;
+	} else {
+		u16extraSignBits = 0;
+		while ((op >> 31) == (op >> 30)) {
+			u16extraSignBits++;
+			op = op << 1;
+		}
+	}
+	return u16extraSignBits;
+}
+
+/* This table is log2(1+(i/32)) where i=[0:1:32], in q.15 format */
+static const s16 log_table[] = {
+	0,
+	1455,
+	2866,
+	4236,
+	5568,
+	6863,
+	8124,
+	9352,
+	10549,
+	11716,
+	12855,
+	13968,
+	15055,
+	16117,
+	17156,
+	18173,
+	19168,
+	20143,
+	21098,
+	22034,
+	22952,
+	23852,
+	24736,
+	25604,
+	26455,
+	27292,
+	28114,
+	28922,
+	29717,
+	30498,
+	31267,
+	32024,
+	32767
+};
+
+#define LOG_TABLE_SIZE 32       /* log_table size */
+#define LOG2_LOG_TABLE_SIZE 5   /* log2(log_table size) */
+#define Q_LOG_TABLE 15          /* qformat of log_table */
+#define LOG10_2         19728   /* log10(2) in q.16 */
+
+/*
+ * Description:
+ * This routine takes the input number N and its q format qN and compute
+ * the log10(N). This routine first normalizes the input no N.	Then N is in
+ * mag*(2^x) format. mag is any number in the range 2^30-(2^31 - 1).
+ * Then log2(mag * 2^x) = log2(mag) + x is computed. From that
+ * log10(mag * 2^x) = log2(mag * 2^x) * log10(2) is computed.
+ * This routine looks the log2 value in the table considering
+ * LOG2_LOG_TABLE_SIZE+1 MSBs. As the MSB is always 1, only next
+ * LOG2_OF_LOG_TABLE_SIZE MSBs are used for table lookup. Next 16 MSBs are used
+ * for interpolation.
+ * Inputs:
+ * N - number to which log10 has to be found.
+ * qN - q format of N
+ * log10N - address where log10(N) will be written.
+ * qLog10N - address where log10N qformat will be written.
+ * Note/Problem:
+ * For accurate results input should be in normalized or near normalized form.
+ */
+void qm_log10(s32 N, s16 qN, s16 *log10N, s16 *qLog10N)
+{
+	s16 s16norm, s16tableIndex, s16errorApproximation;
+	u16 u16offset;
+	s32 s32log;
+
+	/* normalize the N. */
+	s16norm = qm_norm32(N);
+	N = N << s16norm;
+
+	/* The qformat of N after normalization.
+	 * -30 is added to treat the no as between 1.0 to 2.0
+	 * i.e. after adding the -30 to the qformat the decimal point will be
+	 * just rigtht of the MSB. (i.e. after sign bit and 1st MSB). i.e.
+	 * at the right side of 30th bit.
+	 */
+	qN = qN + s16norm - 30;
+
+	/* take the table index as the LOG2_OF_LOG_TABLE_SIZE bits right of the
+	 * MSB */
+	s16tableIndex = (s16) (N >> (32 - (2 + LOG2_LOG_TABLE_SIZE)));
+
+	/* remove the MSB. the MSB is always 1 after normalization. */
+	s16tableIndex =
+		s16tableIndex & (s16) ((1 << LOG2_LOG_TABLE_SIZE) - 1);
+
+	/* remove the (1+LOG2_OF_LOG_TABLE_SIZE) MSBs in the N. */
+	N = N & ((1 << (32 - (2 + LOG2_LOG_TABLE_SIZE))) - 1);
+
+	/* take the offset as the 16 MSBS after table index.
+	 */
+	u16offset = (u16) (N >> (32 - (2 + LOG2_LOG_TABLE_SIZE + 16)));
+
+	/* look the log value in the table. */
+	s32log = log_table[s16tableIndex];      /* q.15 format */
+
+	/* interpolate using the offset. q.15 format. */
+	s16errorApproximation = (s16) qm_mulu16(u16offset,
+				(u16) (log_table[s16tableIndex + 1] -
+				       log_table[s16tableIndex]));
+
+	 /* q.15 format */
+	s32log = qm_add16((s16) s32log, s16errorApproximation);
+
+	/* adjust for the qformat of the N as
+	 * log2(mag * 2^x) = log2(mag) + x
+	 */
+	s32log = qm_add32(s32log, ((s32) -qN) << 15);   /* q.15 format */
+
+	/* normalize the result. */
+	s16norm = qm_norm32(s32log);
+
+	/* bring all the important bits into lower 16 bits */
+	/* q.15+s16norm-16 format */
+	s32log = qm_shl32(s32log, s16norm - 16);
+
+	/* compute the log10(N) by multiplying log2(N) with log10(2).
+	 * as log10(mag * 2^x) = log2(mag * 2^x) * log10(2)
+	 * log10N in q.15+s16norm-16+1 (LOG10_2 is in q.16)
+	 */
+	*log10N = qm_muls16((s16) s32log, (s16) LOG10_2);
+
+	/* write the q format of the result. */
+	*qLog10N = 15 + s16norm - 16 + 1;
+
+	return;
+}

linux-7.2.3/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_qmath.h

@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ */
+
+#ifndef _BRCM_QMATH_H_
+#define _BRCM_QMATH_H_
+
+#include <types.h>
+
+u16 qm_mulu16(u16 op1, u16 op2);
+
+s16 qm_muls16(s16 op1, s16 op2);
+
+s32 qm_add32(s32 op1, s32 op2);
+
+s16 qm_add16(s16 op1, s16 op2);
+
+s16 qm_sub16(s16 op1, s16 op2);
+
+s32 qm_shl32(s32 op, int shift);
+
+s16 qm_shl16(s16 op, int shift);
+
+s16 qm_shr16(s16 op, int shift);
+
+s16 qm_norm32(s32 op);
+
+void qm_log10(s32 N, s16 qN, s16 *log10N, s16 *qLog10N);
+
+#endif				/* #ifndef _BRCM_QMATH_H_ */

linux-7.2.3/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phyreg_n.h

@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ */
+
+#define NPHY_TBL_ID_GAIN1		0
+#define NPHY_TBL_ID_GAIN2		1
+#define NPHY_TBL_ID_GAINBITS1		2
+#define NPHY_TBL_ID_GAINBITS2		3
+#define NPHY_TBL_ID_GAINLIMIT		4
+#define NPHY_TBL_ID_WRSSIGainLimit	5
+#define NPHY_TBL_ID_RFSEQ		7
+#define NPHY_TBL_ID_AFECTRL		8
+#define NPHY_TBL_ID_ANTSWCTRLLUT	9
+#define NPHY_TBL_ID_IQLOCAL		15
+#define NPHY_TBL_ID_NOISEVAR		16
+#define NPHY_TBL_ID_SAMPLEPLAY		17
+#define NPHY_TBL_ID_CORE1TXPWRCTL	26
+#define NPHY_TBL_ID_CORE2TXPWRCTL	27
+#define NPHY_TBL_ID_CMPMETRICDATAWEIGHTTBL	30
+
+#define NPHY_TBL_ID_EPSILONTBL0   31
+#define NPHY_TBL_ID_SCALARTBL0    32
+#define NPHY_TBL_ID_EPSILONTBL1   33
+#define NPHY_TBL_ID_SCALARTBL1    34
+
+#define	NPHY_TO_BPHY_OFF	0xc00
+
+#define NPHY_BandControl_currentBand			0x0001
+#define RFCC_CHIP0_PU			0x0400
+#define RFCC_POR_FORCE			0x0040
+#define RFCC_OE_POR_FORCE		0x0080
+#define NPHY_RfctrlIntc_override_OFF			0
+#define NPHY_RfctrlIntc_override_TRSW			1
+#define NPHY_RfctrlIntc_override_PA				2
+#define NPHY_RfctrlIntc_override_EXT_LNA_PU		3
+#define NPHY_RfctrlIntc_override_EXT_LNA_GAIN	4
+#define RIFS_ENABLE			0x80
+#define BPHY_BAND_SEL_UP20		0x10
+#define NPHY_MLenable			0x02
+
+#define NPHY_RfseqMode_CoreActv_override 0x0001
+#define NPHY_RfseqMode_Trigger_override	0x0002
+#define NPHY_RfseqCoreActv_TxRxChain0	(0x11)
+#define NPHY_RfseqCoreActv_TxRxChain1	(0x22)
+
+#define NPHY_RfseqTrigger_rx2tx		0x0001
+#define NPHY_RfseqTrigger_tx2rx		0x0002
+#define NPHY_RfseqTrigger_updategainh	0x0004
+#define NPHY_RfseqTrigger_updategainl	0x0008
+#define NPHY_RfseqTrigger_updategainu	0x0010
+#define NPHY_RfseqTrigger_reset2rx	0x0020
+#define NPHY_RfseqStatus_rx2tx		0x0001
+#define NPHY_RfseqStatus_tx2rx		0x0002
+#define NPHY_RfseqStatus_updategainh	0x0004
+#define NPHY_RfseqStatus_updategainl	0x0008
+#define NPHY_RfseqStatus_updategainu	0x0010
+#define NPHY_RfseqStatus_reset2rx	0x0020
+#define NPHY_ClassifierCtrl_cck_en	0x1
+#define NPHY_ClassifierCtrl_ofdm_en	0x2
+#define NPHY_ClassifierCtrl_waited_en	0x4
+#define NPHY_IQFlip_ADC1		0x0001
+#define NPHY_IQFlip_ADC2		0x0010
+#define NPHY_sampleCmd_STOP		0x0002
+
+#define RX_GF_OR_MM			0x0004
+#define RX_GF_MM_AUTO			0x0100
+
+#define NPHY_iqloCalCmdGctl_IQLO_CAL_EN	0x8000
+
+#define NPHY_IqestCmd_iqstart		0x1
+#define NPHY_IqestCmd_iqMode		0x2
+
+#define NPHY_TxPwrCtrlCmd_pwrIndex_init		0x40
+#define NPHY_TxPwrCtrlCmd_pwrIndex_init_rev7	0x19
+
+#define PRIM_SEL_UP20		0x8000
+
+#define NPHY_RFSEQ_RX2TX		0x0
+#define NPHY_RFSEQ_TX2RX		0x1
+#define NPHY_RFSEQ_RESET2RX		0x2
+#define NPHY_RFSEQ_UPDATEGAINH		0x3
+#define NPHY_RFSEQ_UPDATEGAINL		0x4
+#define NPHY_RFSEQ_UPDATEGAINU		0x5
+
+#define NPHY_RFSEQ_CMD_NOP		0x0
+#define NPHY_RFSEQ_CMD_RXG_FBW		0x1
+#define NPHY_RFSEQ_CMD_TR_SWITCH	0x2
+#define NPHY_RFSEQ_CMD_EXT_PA		0x3
+#define NPHY_RFSEQ_CMD_RXPD_TXPD	0x4
+#define NPHY_RFSEQ_CMD_TX_GAIN		0x5
+#define NPHY_RFSEQ_CMD_RX_GAIN		0x6
+#define NPHY_RFSEQ_CMD_SET_HPF_BW	0x7
+#define NPHY_RFSEQ_CMD_CLR_HIQ_DIS	0x8
+#define NPHY_RFSEQ_CMD_END		0xf
+
+#define NPHY_REV3_RFSEQ_CMD_NOP		0x0
+#define NPHY_REV3_RFSEQ_CMD_RXG_FBW	0x1
+#define NPHY_REV3_RFSEQ_CMD_TR_SWITCH	0x2
+#define NPHY_REV3_RFSEQ_CMD_INT_PA_PU	0x3
+#define NPHY_REV3_RFSEQ_CMD_EXT_PA	0x4
+#define NPHY_REV3_RFSEQ_CMD_RXPD_TXPD	0x5
+#define NPHY_REV3_RFSEQ_CMD_TX_GAIN	0x6
+#define NPHY_REV3_RFSEQ_CMD_RX_GAIN	0x7
+#define NPHY_REV3_RFSEQ_CMD_CLR_HIQ_DIS	0x8
+#define NPHY_REV3_RFSEQ_CMD_SET_HPF_H_HPC	0x9
+#define NPHY_REV3_RFSEQ_CMD_SET_LPF_H_HPC	0xa
+#define NPHY_REV3_RFSEQ_CMD_SET_HPF_M_HPC	0xb
+#define NPHY_REV3_RFSEQ_CMD_SET_LPF_M_HPC	0xc
+#define NPHY_REV3_RFSEQ_CMD_SET_HPF_L_HPC	0xd
+#define NPHY_REV3_RFSEQ_CMD_SET_LPF_L_HPC	0xe
+#define NPHY_REV3_RFSEQ_CMD_CLR_RXRX_BIAS	0xf
+#define NPHY_REV3_RFSEQ_CMD_END		0x1f
+
+#define NPHY_RSSI_SEL_W1		0x0
+#define NPHY_RSSI_SEL_W2		0x1
+#define NPHY_RSSI_SEL_NB		0x2
+#define NPHY_RSSI_SEL_IQ		0x3
+#define NPHY_RSSI_SEL_TSSI_2G		0x4
+#define NPHY_RSSI_SEL_TSSI_5G		0x5
+#define NPHY_RSSI_SEL_TBD		0x6
+
+#define NPHY_RAIL_I			0x0
+#define NPHY_RAIL_Q			0x1
+
+#define NPHY_FORCESIG_DECODEGATEDCLKS	0x8
+
+#define NPHY_REV7_RfctrlOverride_cmd_rxrf_pu 0x0
+#define NPHY_REV7_RfctrlOverride_cmd_rx_pu   0x1
+#define NPHY_REV7_RfctrlOverride_cmd_tx_pu   0x2
+#define NPHY_REV7_RfctrlOverride_cmd_rxgain  0x3
+#define NPHY_REV7_RfctrlOverride_cmd_txgain  0x4
+
+#define NPHY_REV7_RXGAINCODE_RFMXGAIN_MASK 0x000ff
+#define NPHY_REV7_RXGAINCODE_LPFGAIN_MASK  0x0ff00
+#define NPHY_REV7_RXGAINCODE_DVGAGAIN_MASK 0xf0000
+
+#define NPHY_REV7_TXGAINCODE_TGAIN_MASK     0x7fff
+#define NPHY_REV7_TXGAINCODE_LPFGAIN_MASK   0x8000
+#define NPHY_REV7_TXGAINCODE_BIQ0GAIN_SHIFT 14
+
+#define NPHY_REV7_RFCTRLOVERRIDE_ID0 0x0
+#define NPHY_REV7_RFCTRLOVERRIDE_ID1 0x1
+#define NPHY_REV7_RFCTRLOVERRIDE_ID2 0x2
+
+#define NPHY_IqestIqAccLo(core)  ((core == 0) ? 0x12c : 0x134)
+
+#define NPHY_IqestIqAccHi(core)  ((core == 0) ? 0x12d : 0x135)
+
+#define NPHY_IqestipwrAccLo(core)  ((core == 0) ? 0x12e : 0x136)
+
+#define NPHY_IqestipwrAccHi(core)  ((core == 0) ? 0x12f : 0x137)
+
+#define NPHY_IqestqpwrAccLo(core)  ((core == 0) ? 0x130 : 0x138)
+
+#define NPHY_IqestqpwrAccHi(core)  ((core == 0) ? 0x131 : 0x139)

linux-7.2.3/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phytbl_lcn.h

@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ */
+
+#include <types.h>
+#include "phy_int.h"
+
+extern const struct phytbl_info dot11lcnphytbl_rx_gain_info_rev0[];
+extern const u32 dot11lcnphytbl_rx_gain_info_sz_rev0;
+extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313;
+extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_ipa;
+extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_epa;
+extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_epa_combo;
+extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_epa;
+extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_epa_p250;
+
+extern const struct phytbl_info dot11lcnphytbl_info_rev0[];
+extern const u32 dot11lcnphytbl_info_sz_rev0;
+
+extern const struct phytbl_info dot11lcnphytbl_rx_gain_info_2G_rev2[];
+extern const u32 dot11lcnphytbl_rx_gain_info_2G_rev2_sz;
+
+extern const struct phytbl_info dot11lcnphytbl_rx_gain_info_5G_rev2[];
+extern const u32 dot11lcnphytbl_rx_gain_info_5G_rev2_sz;
+
+extern const struct phytbl_info dot11lcnphytbl_rx_gain_info_extlna_2G_rev2[];
+
+extern const struct phytbl_info dot11lcnphytbl_rx_gain_info_extlna_5G_rev2[];
+
+struct lcnphy_tx_gain_tbl_entry {
+	unsigned char gm;
+	unsigned char pga;
+	unsigned char pad;
+	unsigned char dac;
+	unsigned char bb_mult;
+};
+
+extern const struct lcnphy_tx_gain_tbl_entry dot11lcnphy_2GHz_gaintable_rev0[];
+
+extern const struct
+lcnphy_tx_gain_tbl_entry dot11lcnphy_2GHz_extPA_gaintable_rev0[];
+
+extern const struct lcnphy_tx_gain_tbl_entry dot11lcnphy_5GHz_gaintable_rev0[];

linux-7.2.3/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phytbl_n.h

@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ */
+
+#define ANT_SWCTRL_TBL_REV3_IDX (0)
+
+#include <types.h>
+#include "phy_int.h"
+
+extern const struct phytbl_info mimophytbl_info_rev0[],
+				mimophytbl_info_rev0_volatile[];
+
+extern const u32 mimophytbl_info_sz_rev0,
+		 mimophytbl_info_sz_rev0_volatile;
+
+extern const struct phytbl_info mimophytbl_info_rev3[],
+				mimophytbl_info_rev3_volatile[],
+				mimophytbl_info_rev3_volatile1[],
+				mimophytbl_info_rev3_volatile2[],
+				mimophytbl_info_rev3_volatile3[];
+
+extern const u32 mimophytbl_info_sz_rev3,
+		 mimophytbl_info_sz_rev3_volatile,
+		 mimophytbl_info_sz_rev3_volatile1,
+		 mimophytbl_info_sz_rev3_volatile2,
+		 mimophytbl_info_sz_rev3_volatile3;
+
+extern const u32 noise_var_tbl_rev3[];
+
+extern const struct phytbl_info mimophytbl_info_rev7[];
+
+extern const u32 mimophytbl_info_sz_rev7;
+
+extern const u32 noise_var_tbl_rev7[];
+
+extern const struct phytbl_info mimophytbl_info_rev16[];
+
+extern const u32 mimophytbl_info_sz_rev16;