Resguardo inicial

linux-7.2.3/drivers/nfc/st-nci/Kconfig

@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config NFC_ST_NCI
+	tristate
+	help
+	  STMicroelectronics NFC NCI chips core driver. It implements the chipset
+	  NCI logic and hooks into the NFC kernel APIs. Physical layers will
+	  register against it.
+
+config NFC_ST_NCI_I2C
+	tristate "STMicroelectronics ST NCI NFC driver (I2C)"
+	depends on NFC_NCI && I2C
+	select NFC_ST_NCI
+	help
+	  This module adds support for an I2C interface to the
+	  STMicroelectronics NFC NCI chips family.
+	  Select this if your platform is using the i2c bus.
+
+	  If you choose to build a module, it'll be called st-nci_i2c.
+	  Say N if unsure.
+
+config NFC_ST_NCI_SPI
+	tristate "STMicroelectronics ST NCI NFC driver (SPI)"
+	depends on NFC_NCI && SPI
+	select NFC_ST_NCI
+	help
+	  This module adds support for an SPI interface to the
+	  STMicroelectronics NFC NCI chips family.
+	  Select this if your platform is using the spi bus.
+
+	  If you choose to build a module, it'll be called st-nci_spi.
+	  Say N if unsure.

linux-7.2.3/drivers/nfc/st-nci/Makefile

@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for ST_NCI NCI based NFC driver
+#
+
+st-nci-objs = ndlc.o core.o se.o vendor_cmds.o
+obj-$(CONFIG_NFC_ST_NCI)     += st-nci.o
+
+st-nci_i2c-objs = i2c.o
+obj-$(CONFIG_NFC_ST_NCI_I2C) += st-nci_i2c.o
+
+st-nci_spi-objs = spi.o
+obj-$(CONFIG_NFC_ST_NCI_SPI) += st-nci_spi.o

linux-7.2.3/drivers/nfc/st-nci/core.c

@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * NCI based Driver for STMicroelectronics NFC Chip
+ *
+ * Copyright (C) 2014-2015  STMicroelectronics SAS. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <net/nfc/nci.h>
+#include <net/nfc/nci_core.h>
+
+#include "st-nci.h"
+
+#define DRIVER_DESC "NCI NFC driver for ST_NCI"
+
+#define ST_NCI1_X_PROPRIETARY_ISO15693 0x83
+
+static int st_nci_init(struct nci_dev *ndev)
+{
+	struct nci_mode_set_cmd cmd;
+
+	cmd.cmd_type = ST_NCI_SET_NFC_MODE;
+	cmd.mode = 1;
+
+	return nci_prop_cmd(ndev, ST_NCI_CORE_PROP,
+			sizeof(struct nci_mode_set_cmd), (__u8 *)&cmd);
+}
+
+static int st_nci_open(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+	int r;
+
+	if (test_and_set_bit(ST_NCI_RUNNING, &info->flags))
+		return 0;
+
+	r = ndlc_open(info->ndlc);
+	if (r)
+		clear_bit(ST_NCI_RUNNING, &info->flags);
+
+	return r;
+}
+
+static int st_nci_close(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	if (!test_bit(ST_NCI_RUNNING, &info->flags))
+		return 0;
+
+	ndlc_close(info->ndlc);
+
+	clear_bit(ST_NCI_RUNNING, &info->flags);
+
+	return 0;
+}
+
+static int st_nci_send(struct nci_dev *ndev, struct sk_buff *skb)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	skb->dev = (void *)ndev;
+
+	if (!test_bit(ST_NCI_RUNNING, &info->flags))
+		return -EBUSY;
+
+	return ndlc_send(info->ndlc, skb);
+}
+
+static __u32 st_nci_get_rfprotocol(struct nci_dev *ndev,
+					 __u8 rf_protocol)
+{
+	return rf_protocol == ST_NCI1_X_PROPRIETARY_ISO15693 ?
+		NFC_PROTO_ISO15693_MASK : 0;
+}
+
+static int st_nci_prop_rsp_packet(struct nci_dev *ndev,
+					struct sk_buff *skb)
+{
+	__u8 status = skb->data[0];
+
+	nci_req_complete(ndev, status);
+	return 0;
+}
+
+static const struct nci_driver_ops st_nci_prop_ops[] = {
+	{
+		.opcode = nci_opcode_pack(NCI_GID_PROPRIETARY,
+					  ST_NCI_CORE_PROP),
+		.rsp = st_nci_prop_rsp_packet,
+	},
+};
+
+static const struct nci_ops st_nci_ops = {
+	.init = st_nci_init,
+	.open = st_nci_open,
+	.close = st_nci_close,
+	.send = st_nci_send,
+	.get_rfprotocol = st_nci_get_rfprotocol,
+	.discover_se = st_nci_discover_se,
+	.enable_se = st_nci_enable_se,
+	.disable_se = st_nci_disable_se,
+	.se_io = st_nci_se_io,
+	.hci_load_session = st_nci_hci_load_session,
+	.hci_event_received = st_nci_hci_event_received,
+	.hci_cmd_received = st_nci_hci_cmd_received,
+	.prop_ops = st_nci_prop_ops,
+	.n_prop_ops = ARRAY_SIZE(st_nci_prop_ops),
+};
+
+int st_nci_probe(struct llt_ndlc *ndlc, int phy_headroom,
+		 int phy_tailroom, struct st_nci_se_status *se_status)
+{
+	struct st_nci_info *info;
+	int r;
+	u32 protocols;
+
+	info = devm_kzalloc(ndlc->dev,
+			sizeof(struct st_nci_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	protocols = NFC_PROTO_JEWEL_MASK
+		| NFC_PROTO_MIFARE_MASK
+		| NFC_PROTO_FELICA_MASK
+		| NFC_PROTO_ISO14443_MASK
+		| NFC_PROTO_ISO14443_B_MASK
+		| NFC_PROTO_ISO15693_MASK
+		| NFC_PROTO_NFC_DEP_MASK;
+
+	BUILD_BUG_ON(ARRAY_SIZE(st_nci_prop_ops) > NCI_MAX_PROPRIETARY_CMD);
+	ndlc->ndev = nci_allocate_device(&st_nci_ops, protocols,
+					phy_headroom, phy_tailroom);
+	if (!ndlc->ndev) {
+		pr_err("Cannot allocate nfc ndev\n");
+		return -ENOMEM;
+	}
+	info->ndlc = ndlc;
+
+	nci_set_drvdata(ndlc->ndev, info);
+
+	r = st_nci_vendor_cmds_init(ndlc->ndev);
+	if (r) {
+		pr_err("Cannot register proprietary vendor cmds\n");
+		goto err_reg_dev;
+	}
+
+	r = nci_register_device(ndlc->ndev);
+	if (r) {
+		pr_err("Cannot register nfc device to nci core\n");
+		goto err_reg_dev;
+	}
+
+	return st_nci_se_init(ndlc->ndev, se_status);
+
+err_reg_dev:
+	nci_free_device(ndlc->ndev);
+	return r;
+}
+EXPORT_SYMBOL_GPL(st_nci_probe);
+
+void st_nci_remove(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	ndlc_close(info->ndlc);
+
+	nci_unregister_device(ndev);
+	nci_free_device(ndev);
+}
+EXPORT_SYMBOL_GPL(st_nci_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);

linux-7.2.3/drivers/nfc/st-nci/i2c.c

@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * I2C Link Layer for ST NCI NFC controller familly based Driver
+ * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/nfc.h>
+#include <linux/of.h>
+
+#include "st-nci.h"
+
+#define DRIVER_DESC "NCI NFC driver for ST_NCI"
+
+/* ndlc header */
+#define ST_NCI_FRAME_HEADROOM 1
+#define ST_NCI_FRAME_TAILROOM 0
+
+#define ST_NCI_I2C_MIN_SIZE 4   /* PCB(1) + NCI Packet header(3) */
+#define ST_NCI_I2C_MAX_SIZE 250 /* req 4.2.1 */
+
+#define ST_NCI_DRIVER_NAME "st_nci"
+#define ST_NCI_I2C_DRIVER_NAME "st_nci_i2c"
+
+struct st_nci_i2c_phy {
+	struct i2c_client *i2c_dev;
+	struct llt_ndlc *ndlc;
+
+	bool irq_active;
+
+	struct gpio_desc *gpiod_reset;
+
+	struct st_nci_se_status se_status;
+};
+
+static int st_nci_i2c_enable(void *phy_id)
+{
+	struct st_nci_i2c_phy *phy = phy_id;
+
+	gpiod_set_value(phy->gpiod_reset, 0);
+	usleep_range(10000, 15000);
+	gpiod_set_value(phy->gpiod_reset, 1);
+	usleep_range(80000, 85000);
+
+	if (phy->ndlc->powered == 0 && phy->irq_active == 0) {
+		enable_irq(phy->i2c_dev->irq);
+		phy->irq_active = true;
+	}
+
+	return 0;
+}
+
+static void st_nci_i2c_disable(void *phy_id)
+{
+	struct st_nci_i2c_phy *phy = phy_id;
+
+	disable_irq_nosync(phy->i2c_dev->irq);
+	phy->irq_active = false;
+}
+
+/*
+ * Writing a frame must not return the number of written bytes.
+ * It must return either zero for success, or <0 for error.
+ * In addition, it must not alter the skb
+ */
+static int st_nci_i2c_write(void *phy_id, struct sk_buff *skb)
+{
+	int r;
+	struct st_nci_i2c_phy *phy = phy_id;
+	struct i2c_client *client = phy->i2c_dev;
+
+	if (phy->ndlc->hard_fault != 0)
+		return phy->ndlc->hard_fault;
+
+	r = i2c_master_send(client, skb->data, skb->len);
+	if (r < 0) {  /* Retry, chip was in standby */
+		usleep_range(1000, 4000);
+		r = i2c_master_send(client, skb->data, skb->len);
+	}
+
+	if (r >= 0) {
+		if (r != skb->len)
+			r = -EREMOTEIO;
+		else
+			r = 0;
+	}
+
+	return r;
+}
+
+/*
+ * Reads an ndlc frame and returns it in a newly allocated sk_buff.
+ * returns:
+ * 0 : if received frame is complete
+ * -EREMOTEIO : i2c read error (fatal)
+ * -EBADMSG : frame was incorrect and discarded
+ * -ENOMEM : cannot allocate skb, frame dropped
+ */
+static int st_nci_i2c_read(struct st_nci_i2c_phy *phy,
+				 struct sk_buff **skb)
+{
+	int r;
+	u8 len;
+	u8 buf[ST_NCI_I2C_MAX_SIZE];
+	struct i2c_client *client = phy->i2c_dev;
+
+	r = i2c_master_recv(client, buf, ST_NCI_I2C_MIN_SIZE);
+	if (r < 0) {  /* Retry, chip was in standby */
+		usleep_range(1000, 4000);
+		r = i2c_master_recv(client, buf, ST_NCI_I2C_MIN_SIZE);
+	}
+
+	if (r != ST_NCI_I2C_MIN_SIZE)
+		return -EREMOTEIO;
+
+	len = be16_to_cpu(*(__be16 *) (buf + 2));
+	if (len > ST_NCI_I2C_MAX_SIZE) {
+		nfc_err(&client->dev, "invalid frame len\n");
+		return -EBADMSG;
+	}
+
+	*skb = alloc_skb(ST_NCI_I2C_MIN_SIZE + len, GFP_KERNEL);
+	if (*skb == NULL)
+		return -ENOMEM;
+
+	skb_reserve(*skb, ST_NCI_I2C_MIN_SIZE);
+	skb_put(*skb, ST_NCI_I2C_MIN_SIZE);
+	memcpy((*skb)->data, buf, ST_NCI_I2C_MIN_SIZE);
+
+	if (!len)
+		return 0;
+
+	r = i2c_master_recv(client, buf, len);
+	if (r != len) {
+		kfree_skb(*skb);
+		return -EREMOTEIO;
+	}
+
+	skb_put(*skb, len);
+	memcpy((*skb)->data + ST_NCI_I2C_MIN_SIZE, buf, len);
+
+	return 0;
+}
+
+/*
+ * Reads an ndlc frame from the chip.
+ *
+ * On ST_NCI, IRQ goes in idle state when read starts.
+ */
+static irqreturn_t st_nci_irq_thread_fn(int irq, void *phy_id)
+{
+	struct st_nci_i2c_phy *phy = phy_id;
+	struct sk_buff *skb = NULL;
+	int r;
+
+	if (!phy || !phy->ndlc || irq != phy->i2c_dev->irq) {
+		WARN_ON_ONCE(1);
+		return IRQ_NONE;
+	}
+
+	if (phy->ndlc->hard_fault)
+		return IRQ_HANDLED;
+
+	if (!phy->ndlc->powered) {
+		st_nci_i2c_disable(phy);
+		return IRQ_HANDLED;
+	}
+
+	r = st_nci_i2c_read(phy, &skb);
+	if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG)
+		return IRQ_HANDLED;
+
+	ndlc_recv(phy->ndlc, skb);
+
+	return IRQ_HANDLED;
+}
+
+static const struct nfc_phy_ops i2c_phy_ops = {
+	.write = st_nci_i2c_write,
+	.enable = st_nci_i2c_enable,
+	.disable = st_nci_i2c_disable,
+};
+
+static const struct acpi_gpio_params reset_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_st_nci_gpios[] = {
+	{ "reset-gpios", &reset_gpios, 1 },
+	{},
+};
+
+static int st_nci_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct st_nci_i2c_phy *phy;
+	int r;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
+		return -ENODEV;
+	}
+
+	phy = devm_kzalloc(dev, sizeof(struct st_nci_i2c_phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->i2c_dev = client;
+
+	i2c_set_clientdata(client, phy);
+
+	r = devm_acpi_dev_add_driver_gpios(dev, acpi_st_nci_gpios);
+	if (r)
+		dev_dbg(dev, "Unable to add GPIO mapping table\n");
+
+	/* Get RESET GPIO */
+	phy->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(phy->gpiod_reset)) {
+		nfc_err(dev, "Unable to get RESET GPIO\n");
+		return -ENODEV;
+	}
+
+	phy->se_status.is_ese_present =
+				device_property_read_bool(dev, "ese-present");
+	phy->se_status.is_uicc_present =
+				device_property_read_bool(dev, "uicc-present");
+
+	r = ndlc_probe(phy, &i2c_phy_ops, &client->dev,
+			ST_NCI_FRAME_HEADROOM, ST_NCI_FRAME_TAILROOM,
+			&phy->ndlc, &phy->se_status);
+	if (r < 0) {
+		nfc_err(&client->dev, "Unable to register ndlc layer\n");
+		return r;
+	}
+
+	phy->irq_active = true;
+	r = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+				st_nci_irq_thread_fn,
+				IRQF_ONESHOT,
+				ST_NCI_DRIVER_NAME, phy);
+	if (r < 0)
+		nfc_err(&client->dev, "Unable to register IRQ handler\n");
+
+	return r;
+}
+
+static void st_nci_i2c_remove(struct i2c_client *client)
+{
+	struct st_nci_i2c_phy *phy = i2c_get_clientdata(client);
+
+	ndlc_remove(phy->ndlc);
+}
+
+static const struct i2c_device_id st_nci_i2c_id_table[] = {
+	{ .name = ST_NCI_DRIVER_NAME },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, st_nci_i2c_id_table);
+
+static const struct acpi_device_id st_nci_i2c_acpi_match[] __maybe_unused = {
+	{"SMO2101"},
+	{"SMO2102"},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, st_nci_i2c_acpi_match);
+
+static const struct of_device_id of_st_nci_i2c_match[] __maybe_unused = {
+	{ .compatible = "st,st21nfcb-i2c", },
+	{ .compatible = "st,st21nfcb_i2c", },
+	{ .compatible = "st,st21nfcc-i2c", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, of_st_nci_i2c_match);
+
+static struct i2c_driver st_nci_i2c_driver = {
+	.driver = {
+		.name = ST_NCI_I2C_DRIVER_NAME,
+		.of_match_table = of_match_ptr(of_st_nci_i2c_match),
+		.acpi_match_table = ACPI_PTR(st_nci_i2c_acpi_match),
+	},
+	.probe = st_nci_i2c_probe,
+	.id_table = st_nci_i2c_id_table,
+	.remove = st_nci_i2c_remove,
+};
+module_i2c_driver(st_nci_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);

linux-7.2.3/drivers/nfc/st-nci/ndlc.c

@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Low Level Transport (NDLC) Driver for STMicroelectronics NFC Chip
+ *
+ * Copyright (C) 2014-2015  STMicroelectronics SAS. All rights reserved.
+ */
+
+#include <linux/sched.h>
+#include <net/nfc/nci_core.h>
+
+#include "st-nci.h"
+
+#define NDLC_TIMER_T1		100
+#define NDLC_TIMER_T1_WAIT	400
+#define NDLC_TIMER_T2		1200
+
+#define PCB_TYPE_DATAFRAME		0x80
+#define PCB_TYPE_SUPERVISOR		0xc0
+#define PCB_TYPE_MASK			PCB_TYPE_SUPERVISOR
+
+#define PCB_SYNC_ACK			0x20
+#define PCB_SYNC_NACK			0x10
+#define PCB_SYNC_WAIT			0x30
+#define PCB_SYNC_NOINFO			0x00
+#define PCB_SYNC_MASK			PCB_SYNC_WAIT
+
+#define PCB_DATAFRAME_RETRANSMIT_YES	0x00
+#define PCB_DATAFRAME_RETRANSMIT_NO	0x04
+#define PCB_DATAFRAME_RETRANSMIT_MASK	PCB_DATAFRAME_RETRANSMIT_NO
+
+#define PCB_SUPERVISOR_RETRANSMIT_YES	0x00
+#define PCB_SUPERVISOR_RETRANSMIT_NO	0x02
+#define PCB_SUPERVISOR_RETRANSMIT_MASK	PCB_SUPERVISOR_RETRANSMIT_NO
+
+#define PCB_FRAME_CRC_INFO_PRESENT	0x08
+#define PCB_FRAME_CRC_INFO_NOTPRESENT	0x00
+#define PCB_FRAME_CRC_INFO_MASK		PCB_FRAME_CRC_INFO_PRESENT
+
+#define NDLC_DUMP_SKB(info, skb)                                 \
+do {                                                             \
+	pr_debug("%s:\n", info);                                 \
+	print_hex_dump(KERN_DEBUG, "ndlc: ", DUMP_PREFIX_OFFSET, \
+			16, 1, skb->data, skb->len, 0);          \
+} while (0)
+
+int ndlc_open(struct llt_ndlc *ndlc)
+{
+	/* toggle reset pin */
+	ndlc->ops->enable(ndlc->phy_id);
+	ndlc->powered = 1;
+	return 0;
+}
+EXPORT_SYMBOL(ndlc_open);
+
+void ndlc_close(struct llt_ndlc *ndlc)
+{
+	struct nci_mode_set_cmd cmd;
+
+	cmd.cmd_type = ST_NCI_SET_NFC_MODE;
+	cmd.mode = 0;
+
+	/* toggle reset pin */
+	ndlc->ops->enable(ndlc->phy_id);
+
+	nci_prop_cmd(ndlc->ndev, ST_NCI_CORE_PROP,
+		     sizeof(struct nci_mode_set_cmd), (__u8 *)&cmd);
+
+	ndlc->powered = 0;
+	ndlc->ops->disable(ndlc->phy_id);
+}
+EXPORT_SYMBOL(ndlc_close);
+
+int ndlc_send(struct llt_ndlc *ndlc, struct sk_buff *skb)
+{
+	/* add ndlc header */
+	u8 pcb = PCB_TYPE_DATAFRAME | PCB_DATAFRAME_RETRANSMIT_NO |
+		PCB_FRAME_CRC_INFO_NOTPRESENT;
+
+	*(u8 *)skb_push(skb, 1) = pcb;
+	skb_queue_tail(&ndlc->send_q, skb);
+
+	schedule_work(&ndlc->sm_work);
+
+	return 0;
+}
+EXPORT_SYMBOL(ndlc_send);
+
+static void llt_ndlc_send_queue(struct llt_ndlc *ndlc)
+{
+	struct sk_buff *skb;
+	int r;
+	unsigned long time_sent;
+
+	if (ndlc->send_q.qlen)
+		pr_debug("sendQlen=%d unackQlen=%d\n",
+			 ndlc->send_q.qlen, ndlc->ack_pending_q.qlen);
+
+	while (ndlc->send_q.qlen) {
+		skb = skb_dequeue(&ndlc->send_q);
+		NDLC_DUMP_SKB("ndlc frame written", skb);
+		r = ndlc->ops->write(ndlc->phy_id, skb);
+		if (r < 0) {
+			ndlc->hard_fault = r;
+			break;
+		}
+		time_sent = jiffies;
+		*(unsigned long *)skb->cb = time_sent;
+
+		skb_queue_tail(&ndlc->ack_pending_q, skb);
+
+		/* start timer t1 for ndlc aknowledge */
+		ndlc->t1_active = true;
+		mod_timer(&ndlc->t1_timer, time_sent +
+			msecs_to_jiffies(NDLC_TIMER_T1));
+		/* start timer t2 for chip availability */
+		ndlc->t2_active = true;
+		mod_timer(&ndlc->t2_timer, time_sent +
+			msecs_to_jiffies(NDLC_TIMER_T2));
+	}
+}
+
+static void llt_ndlc_requeue_data_pending(struct llt_ndlc *ndlc)
+{
+	struct sk_buff *skb;
+	u8 pcb;
+
+	while ((skb = skb_dequeue_tail(&ndlc->ack_pending_q))) {
+		pcb = skb->data[0];
+		switch (pcb & PCB_TYPE_MASK) {
+		case PCB_TYPE_SUPERVISOR:
+			skb->data[0] = (pcb & ~PCB_SUPERVISOR_RETRANSMIT_MASK) |
+				PCB_SUPERVISOR_RETRANSMIT_YES;
+			break;
+		case PCB_TYPE_DATAFRAME:
+			skb->data[0] = (pcb & ~PCB_DATAFRAME_RETRANSMIT_MASK) |
+				PCB_DATAFRAME_RETRANSMIT_YES;
+			break;
+		default:
+			pr_err("UNKNOWN Packet Control Byte=%d\n", pcb);
+			kfree_skb(skb);
+			continue;
+		}
+		skb_queue_head(&ndlc->send_q, skb);
+	}
+}
+
+static void llt_ndlc_rcv_queue(struct llt_ndlc *ndlc)
+{
+	struct sk_buff *skb;
+	u8 pcb;
+	unsigned long time_sent;
+
+	if (ndlc->rcv_q.qlen)
+		pr_debug("rcvQlen=%d\n", ndlc->rcv_q.qlen);
+
+	while ((skb = skb_dequeue(&ndlc->rcv_q)) != NULL) {
+		pcb = skb->data[0];
+		skb_pull(skb, 1);
+		if ((pcb & PCB_TYPE_MASK) == PCB_TYPE_SUPERVISOR) {
+			switch (pcb & PCB_SYNC_MASK) {
+			case PCB_SYNC_ACK:
+				skb = skb_dequeue(&ndlc->ack_pending_q);
+				kfree_skb(skb);
+				timer_delete_sync(&ndlc->t1_timer);
+				timer_delete_sync(&ndlc->t2_timer);
+				ndlc->t2_active = false;
+				ndlc->t1_active = false;
+				break;
+			case PCB_SYNC_NACK:
+				llt_ndlc_requeue_data_pending(ndlc);
+				llt_ndlc_send_queue(ndlc);
+				/* start timer t1 for ndlc aknowledge */
+				time_sent = jiffies;
+				ndlc->t1_active = true;
+				mod_timer(&ndlc->t1_timer, time_sent +
+					msecs_to_jiffies(NDLC_TIMER_T1));
+				break;
+			case PCB_SYNC_WAIT:
+				time_sent = jiffies;
+				ndlc->t1_active = true;
+				mod_timer(&ndlc->t1_timer, time_sent +
+					  msecs_to_jiffies(NDLC_TIMER_T1_WAIT));
+				break;
+			default:
+				kfree_skb(skb);
+				break;
+			}
+		} else if ((pcb & PCB_TYPE_MASK) == PCB_TYPE_DATAFRAME) {
+			nci_recv_frame(ndlc->ndev, skb);
+		} else {
+			kfree_skb(skb);
+		}
+	}
+}
+
+static void llt_ndlc_sm_work(struct work_struct *work)
+{
+	struct llt_ndlc *ndlc = container_of(work, struct llt_ndlc, sm_work);
+
+	llt_ndlc_send_queue(ndlc);
+	llt_ndlc_rcv_queue(ndlc);
+
+	if (ndlc->t1_active && timer_pending(&ndlc->t1_timer) == 0) {
+		pr_debug
+		    ("Handle T1(recv SUPERVISOR) elapsed (T1 now inactive)\n");
+		ndlc->t1_active = false;
+
+		llt_ndlc_requeue_data_pending(ndlc);
+		llt_ndlc_send_queue(ndlc);
+	}
+
+	if (ndlc->t2_active && timer_pending(&ndlc->t2_timer) == 0) {
+		pr_debug("Handle T2(recv DATA) elapsed (T2 now inactive)\n");
+		ndlc->t2_active = false;
+		ndlc->t1_active = false;
+		timer_delete_sync(&ndlc->t1_timer);
+		timer_delete_sync(&ndlc->t2_timer);
+		ndlc_close(ndlc);
+		ndlc->hard_fault = -EREMOTEIO;
+	}
+}
+
+void ndlc_recv(struct llt_ndlc *ndlc, struct sk_buff *skb)
+{
+	if (skb == NULL) {
+		pr_err("NULL Frame -> link is dead\n");
+		ndlc->hard_fault = -EREMOTEIO;
+		ndlc_close(ndlc);
+	} else {
+		NDLC_DUMP_SKB("incoming frame", skb);
+		skb_queue_tail(&ndlc->rcv_q, skb);
+	}
+
+	schedule_work(&ndlc->sm_work);
+}
+EXPORT_SYMBOL(ndlc_recv);
+
+static void ndlc_t1_timeout(struct timer_list *t)
+{
+	struct llt_ndlc *ndlc = timer_container_of(ndlc, t, t1_timer);
+
+	schedule_work(&ndlc->sm_work);
+}
+
+static void ndlc_t2_timeout(struct timer_list *t)
+{
+	struct llt_ndlc *ndlc = timer_container_of(ndlc, t, t2_timer);
+
+	schedule_work(&ndlc->sm_work);
+}
+
+int ndlc_probe(void *phy_id, const struct nfc_phy_ops *phy_ops,
+	       struct device *dev, int phy_headroom, int phy_tailroom,
+	       struct llt_ndlc **ndlc_id, struct st_nci_se_status *se_status)
+{
+	struct llt_ndlc *ndlc;
+
+	ndlc = devm_kzalloc(dev, sizeof(struct llt_ndlc), GFP_KERNEL);
+	if (!ndlc)
+		return -ENOMEM;
+
+	ndlc->ops = phy_ops;
+	ndlc->phy_id = phy_id;
+	ndlc->dev = dev;
+	ndlc->powered = 0;
+
+	*ndlc_id = ndlc;
+
+	/* initialize timers */
+	timer_setup(&ndlc->t1_timer, ndlc_t1_timeout, 0);
+	timer_setup(&ndlc->t2_timer, ndlc_t2_timeout, 0);
+
+	skb_queue_head_init(&ndlc->rcv_q);
+	skb_queue_head_init(&ndlc->send_q);
+	skb_queue_head_init(&ndlc->ack_pending_q);
+
+	INIT_WORK(&ndlc->sm_work, llt_ndlc_sm_work);
+
+	return st_nci_probe(ndlc, phy_headroom, phy_tailroom, se_status);
+}
+EXPORT_SYMBOL(ndlc_probe);
+
+void ndlc_remove(struct llt_ndlc *ndlc)
+{
+	/* cancel timers */
+	timer_delete_sync(&ndlc->t1_timer);
+	timer_delete_sync(&ndlc->t2_timer);
+	ndlc->t2_active = false;
+	ndlc->t1_active = false;
+	/* cancel work */
+	cancel_work_sync(&ndlc->sm_work);
+
+	st_nci_remove(ndlc->ndev);
+
+	skb_queue_purge(&ndlc->rcv_q);
+	skb_queue_purge(&ndlc->send_q);
+}
+EXPORT_SYMBOL(ndlc_remove);

linux-7.2.3/drivers/nfc/st-nci/ndlc.h

@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * NCI based Driver for STMicroelectronics NFC Chip
+ *
+ * Copyright (C) 2014-2015  STMicroelectronics SAS. All rights reserved.
+ */
+
+#ifndef __LOCAL_NDLC_H_
+#define __LOCAL_NDLC_H_
+
+#include <linux/skbuff.h>
+#include <net/nfc/nfc.h>
+
+struct st_nci_se_status;
+
+/* Low Level Transport description */
+struct llt_ndlc {
+	struct nci_dev *ndev;
+	const struct nfc_phy_ops *ops;
+	void *phy_id;
+
+	struct timer_list t1_timer;
+	bool t1_active;
+
+	struct timer_list t2_timer;
+	bool t2_active;
+
+	struct sk_buff_head rcv_q;
+	struct sk_buff_head send_q;
+	struct sk_buff_head ack_pending_q;
+
+	struct work_struct sm_work;
+
+	struct device *dev;
+
+	/*
+	 * < 0 if hardware error occurred
+	 * and prevents normal operation.
+	 */
+	int hard_fault;
+	int powered;
+};
+
+int ndlc_open(struct llt_ndlc *ndlc);
+void ndlc_close(struct llt_ndlc *ndlc);
+int ndlc_send(struct llt_ndlc *ndlc, struct sk_buff *skb);
+void ndlc_recv(struct llt_ndlc *ndlc, struct sk_buff *skb);
+int ndlc_probe(void *phy_id, const struct nfc_phy_ops *phy_ops,
+	       struct device *dev, int phy_headroom, int phy_tailroom,
+	       struct llt_ndlc **ndlc_id, struct st_nci_se_status *se_status);
+void ndlc_remove(struct llt_ndlc *ndlc);
+#endif /* __LOCAL_NDLC_H__ */

linux-7.2.3/drivers/nfc/st-nci/se.c

@@ -0,0 +1,763 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Secure Element driver for STMicroelectronics NFC NCI chip
+ *
+ * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <linux/delay.h>
+#include <net/nfc/nci.h>
+#include <net/nfc/nci_core.h>
+
+#include "st-nci.h"
+
+struct st_nci_pipe_info {
+	u8 pipe_state;
+	u8 src_host_id;
+	u8 src_gate_id;
+	u8 dst_host_id;
+	u8 dst_gate_id;
+} __packed;
+
+/* Hosts */
+#define ST_NCI_HOST_CONTROLLER_ID     0x00
+#define ST_NCI_TERMINAL_HOST_ID       0x01
+#define ST_NCI_UICC_HOST_ID           0x02
+#define ST_NCI_ESE_HOST_ID            0xc0
+
+/* Gates */
+#define ST_NCI_APDU_READER_GATE       0xf0
+#define ST_NCI_CONNECTIVITY_GATE      0x41
+
+/* Pipes */
+#define ST_NCI_DEVICE_MGNT_PIPE               0x02
+
+/* Connectivity pipe only */
+#define ST_NCI_SE_COUNT_PIPE_UICC             0x01
+/* Connectivity + APDU Reader pipe */
+#define ST_NCI_SE_COUNT_PIPE_EMBEDDED         0x02
+
+#define ST_NCI_SE_TO_HOT_PLUG			1000 /* msecs */
+#define ST_NCI_SE_TO_PIPES			2000
+
+#define ST_NCI_EVT_HOT_PLUG_IS_INHIBITED(x)   (x->data[0] & 0x80)
+
+#define NCI_HCI_APDU_PARAM_ATR                     0x01
+#define NCI_HCI_ADMIN_PARAM_SESSION_IDENTITY       0x01
+#define NCI_HCI_ADMIN_PARAM_WHITELIST              0x03
+#define NCI_HCI_ADMIN_PARAM_HOST_LIST              0x04
+
+#define ST_NCI_EVT_SE_HARD_RESET		0x20
+#define ST_NCI_EVT_TRANSMIT_DATA		0x10
+#define ST_NCI_EVT_WTX_REQUEST			0x11
+#define ST_NCI_EVT_SE_SOFT_RESET		0x11
+#define ST_NCI_EVT_SE_END_OF_APDU_TRANSFER	0x21
+#define ST_NCI_EVT_HOT_PLUG			0x03
+
+#define ST_NCI_SE_MODE_OFF                    0x00
+#define ST_NCI_SE_MODE_ON                     0x01
+
+#define ST_NCI_EVT_CONNECTIVITY       0x10
+#define ST_NCI_EVT_TRANSACTION        0x12
+
+#define ST_NCI_DM_GETINFO             0x13
+#define ST_NCI_DM_GETINFO_PIPE_LIST   0x02
+#define ST_NCI_DM_GETINFO_PIPE_INFO   0x01
+#define ST_NCI_DM_PIPE_CREATED        0x02
+#define ST_NCI_DM_PIPE_OPEN           0x04
+#define ST_NCI_DM_RF_ACTIVE           0x80
+#define ST_NCI_DM_DISCONNECT          0x30
+
+#define ST_NCI_DM_IS_PIPE_OPEN(p) \
+	((p & 0x0f) == (ST_NCI_DM_PIPE_CREATED | ST_NCI_DM_PIPE_OPEN))
+
+#define ST_NCI_ATR_DEFAULT_BWI        0x04
+
+/*
+ * WT = 2^BWI/10[s], convert into msecs and add a secure
+ * room by increasing by 2 this timeout
+ */
+#define ST_NCI_BWI_TO_TIMEOUT(x)      ((1 << x) * 200)
+#define ST_NCI_ATR_GET_Y_FROM_TD(x)   (x >> 4)
+
+/* If TA is present bit 0 is set */
+#define ST_NCI_ATR_TA_PRESENT(x) (x & 0x01)
+/* If TB is present bit 1 is set */
+#define ST_NCI_ATR_TB_PRESENT(x) (x & 0x02)
+
+#define ST_NCI_NUM_DEVICES           256
+
+static DECLARE_BITMAP(dev_mask, ST_NCI_NUM_DEVICES);
+
+/* Here are the mandatory pipe for st_nci */
+static struct nci_hci_gate st_nci_gates[] = {
+	{NCI_HCI_ADMIN_GATE, NCI_HCI_ADMIN_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+	{NCI_HCI_LINK_MGMT_GATE, NCI_HCI_LINK_MGMT_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+	{ST_NCI_DEVICE_MGNT_GATE, ST_NCI_DEVICE_MGNT_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+
+	{NCI_HCI_IDENTITY_MGMT_GATE, NCI_HCI_INVALID_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+
+	/* Secure element pipes are created by secure element host */
+	{ST_NCI_CONNECTIVITY_GATE, NCI_HCI_DO_NOT_OPEN_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+	{ST_NCI_APDU_READER_GATE, NCI_HCI_DO_NOT_OPEN_PIPE,
+					ST_NCI_HOST_CONTROLLER_ID},
+};
+
+static u8 st_nci_se_get_bwi(struct nci_dev *ndev)
+{
+	int i;
+	u8 td;
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	/* Bits 8 to 5 of the first TB for T=1 encode BWI from zero to nine */
+	for (i = 1; i < ST_NCI_ESE_MAX_LENGTH; i++) {
+		td = ST_NCI_ATR_GET_Y_FROM_TD(info->se_info.atr[i]);
+		if (ST_NCI_ATR_TA_PRESENT(td))
+			i++;
+		if (ST_NCI_ATR_TB_PRESENT(td)) {
+			i++;
+			return info->se_info.atr[i] >> 4;
+		}
+	}
+	return ST_NCI_ATR_DEFAULT_BWI;
+}
+
+static void st_nci_se_get_atr(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+	int r;
+	struct sk_buff *skb;
+
+	r = nci_hci_get_param(ndev, ST_NCI_APDU_READER_GATE,
+				NCI_HCI_APDU_PARAM_ATR, &skb);
+	if (r < 0)
+		return;
+
+	if (skb->len <= ST_NCI_ESE_MAX_LENGTH) {
+		memcpy(info->se_info.atr, skb->data, skb->len);
+
+		info->se_info.wt_timeout =
+			ST_NCI_BWI_TO_TIMEOUT(st_nci_se_get_bwi(ndev));
+	}
+	kfree_skb(skb);
+}
+
+int st_nci_hci_load_session(struct nci_dev *ndev)
+{
+	int i, j, r;
+	struct sk_buff *skb_pipe_list, *skb_pipe_info;
+	struct st_nci_pipe_info *dm_pipe_info;
+	u8 pipe_list[] = { ST_NCI_DM_GETINFO_PIPE_LIST,
+			ST_NCI_TERMINAL_HOST_ID};
+	u8 pipe_info[] = { ST_NCI_DM_GETINFO_PIPE_INFO,
+			ST_NCI_TERMINAL_HOST_ID, 0};
+
+	/* On ST_NCI device pipes number are dynamics
+	 * If pipes are already created, hci_dev_up will fail.
+	 * Doing a clear all pipe is a bad idea because:
+	 * - It does useless EEPROM cycling
+	 * - It might cause issue for secure elements support
+	 * (such as removing connectivity or APDU reader pipe)
+	 * A better approach on ST_NCI is to:
+	 * - get a pipe list for each host.
+	 * (eg: ST_NCI_HOST_CONTROLLER_ID for now).
+	 * (TODO Later on UICC HOST and eSE HOST)
+	 * - get pipe information
+	 * - match retrieved pipe list in st_nci_gates
+	 * ST_NCI_DEVICE_MGNT_GATE is a proprietary gate
+	 * with ST_NCI_DEVICE_MGNT_PIPE.
+	 * Pipe can be closed and need to be open.
+	 */
+	r = nci_hci_connect_gate(ndev, ST_NCI_HOST_CONTROLLER_ID,
+				ST_NCI_DEVICE_MGNT_GATE,
+				ST_NCI_DEVICE_MGNT_PIPE);
+	if (r < 0)
+		return r;
+
+	/* Get pipe list */
+	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			ST_NCI_DM_GETINFO, pipe_list, sizeof(pipe_list),
+			&skb_pipe_list);
+	if (r < 0)
+		return r;
+
+	/* Complete the existing gate_pipe table */
+	for (i = 0; i < skb_pipe_list->len; i++) {
+		pipe_info[2] = skb_pipe_list->data[i];
+		r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+					ST_NCI_DM_GETINFO, pipe_info,
+					sizeof(pipe_info), &skb_pipe_info);
+
+		if (r)
+			continue;
+
+		/*
+		 * Match pipe ID and gate ID
+		 * Output format from ST21NFC_DM_GETINFO is:
+		 * - pipe state (1byte)
+		 * - source hid (1byte)
+		 * - source gid (1byte)
+		 * - destination hid (1byte)
+		 * - destination gid (1byte)
+		 */
+		dm_pipe_info = (struct st_nci_pipe_info *)skb_pipe_info->data;
+		if (dm_pipe_info->dst_gate_id == ST_NCI_APDU_READER_GATE &&
+		    dm_pipe_info->src_host_id == ST_NCI_UICC_HOST_ID) {
+			pr_err("Unexpected apdu_reader pipe on host %x\n",
+			       dm_pipe_info->src_host_id);
+			kfree_skb(skb_pipe_info);
+			continue;
+		}
+
+		for (j = 3; (j < ARRAY_SIZE(st_nci_gates)) &&
+		     (st_nci_gates[j].gate != dm_pipe_info->dst_gate_id); j++)
+			;
+
+		if (j < ARRAY_SIZE(st_nci_gates) &&
+		    st_nci_gates[j].gate == dm_pipe_info->dst_gate_id &&
+		    ST_NCI_DM_IS_PIPE_OPEN(dm_pipe_info->pipe_state)) {
+			ndev->hci_dev->init_data.gates[j].pipe = pipe_info[2];
+
+			ndev->hci_dev->gate2pipe[st_nci_gates[j].gate] =
+						pipe_info[2];
+			ndev->hci_dev->pipes[pipe_info[2]].gate =
+						st_nci_gates[j].gate;
+			ndev->hci_dev->pipes[pipe_info[2]].host =
+						dm_pipe_info->src_host_id;
+		}
+		kfree_skb(skb_pipe_info);
+	}
+
+	/*
+	 * 3 gates have a well known pipe ID. Only NCI_HCI_LINK_MGMT_GATE
+	 * is not yet open at this stage.
+	 */
+	r = nci_hci_connect_gate(ndev, ST_NCI_HOST_CONTROLLER_ID,
+				 NCI_HCI_LINK_MGMT_GATE,
+				 NCI_HCI_LINK_MGMT_PIPE);
+
+	kfree_skb(skb_pipe_list);
+	return r;
+}
+EXPORT_SYMBOL_GPL(st_nci_hci_load_session);
+
+static void st_nci_hci_admin_event_received(struct nci_dev *ndev,
+					      u8 event, struct sk_buff *skb)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	switch (event) {
+	case ST_NCI_EVT_HOT_PLUG:
+		if (info->se_info.se_active) {
+			if (!ST_NCI_EVT_HOT_PLUG_IS_INHIBITED(skb)) {
+				timer_delete_sync(&info->se_info.se_active_timer);
+				info->se_info.se_active = false;
+				complete(&info->se_info.req_completion);
+			} else {
+				mod_timer(&info->se_info.se_active_timer,
+				      jiffies +
+				      msecs_to_jiffies(ST_NCI_SE_TO_PIPES));
+			}
+		}
+	break;
+	default:
+		nfc_err(&ndev->nfc_dev->dev, "Unexpected event on admin gate\n");
+	}
+}
+
+static int st_nci_hci_apdu_reader_event_received(struct nci_dev *ndev,
+						   u8 event,
+						   struct sk_buff *skb)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	pr_debug("apdu reader gate event: %x\n", event);
+
+	switch (event) {
+	case ST_NCI_EVT_TRANSMIT_DATA:
+		timer_delete_sync(&info->se_info.bwi_timer);
+		info->se_info.bwi_active = false;
+		info->se_info.cb(info->se_info.cb_context,
+				 skb->data, skb->len, 0);
+	break;
+	case ST_NCI_EVT_WTX_REQUEST:
+		mod_timer(&info->se_info.bwi_timer, jiffies +
+			  msecs_to_jiffies(info->se_info.wt_timeout));
+	break;
+	default:
+		nfc_err(&ndev->nfc_dev->dev, "Unexpected event on apdu reader gate\n");
+		return 1;
+	}
+
+	kfree_skb(skb);
+	return 0;
+}
+
+/*
+ * Returns:
+ * <= 0: driver handled the event, skb consumed
+ *    1: driver does not handle the event, please do standard processing
+ */
+static int st_nci_hci_connectivity_event_received(struct nci_dev *ndev,
+						u8 host, u8 event,
+						struct sk_buff *skb)
+{
+	int r = 0;
+	struct device *dev = &ndev->nfc_dev->dev;
+	struct nfc_evt_transaction *transaction;
+	u32 aid_len;
+	u8 params_len;
+
+	pr_debug("connectivity gate event: %x\n", event);
+
+	switch (event) {
+	case ST_NCI_EVT_CONNECTIVITY:
+		r = nfc_se_connectivity(ndev->nfc_dev, host);
+	break;
+	case ST_NCI_EVT_TRANSACTION:
+		/* According to specification etsi 102 622
+		 * 11.2.2.4 EVT_TRANSACTION Table 52
+		 * Description  Tag     Length
+		 * AID          81      5 to 16
+		 * PARAMETERS   82      0 to 255
+		 *
+		 * The key differences are aid storage length is variably sized
+		 * in the packet, but fixed in nfc_evt_transaction, and that
+		 * the aid_len is u8 in the packet, but u32 in the structure,
+		 * and the tags in the packet are not included in
+		 * nfc_evt_transaction.
+		 *
+		 * size(b):  1          1       5-16 1             1           0-255
+		 * offset:   0          1       2    aid_len + 2   aid_len + 3 aid_len + 4
+		 * mem name: aid_tag(M) aid_len aid  params_tag(M) params_len  params
+		 * example:  0x81       5-16    X    0x82          0-255       X
+		 */
+		if (skb->len < 2 || skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG)
+			return -EPROTO;
+
+		aid_len = skb->data[1];
+
+		if (skb->len < aid_len + 4 ||
+		    aid_len > sizeof(transaction->aid))
+			return -EPROTO;
+
+		params_len = skb->data[aid_len + 3];
+
+		/* Verify PARAMETERS tag is (82), and final check that there is
+		 * enough space in the packet to read everything.
+		 */
+		if (skb->data[aid_len + 2] != NFC_EVT_TRANSACTION_PARAMS_TAG ||
+		    skb->len < aid_len + 4 + params_len)
+			return -EPROTO;
+
+		transaction = devm_kzalloc(dev, sizeof(*transaction) +
+					   params_len, GFP_KERNEL);
+		if (!transaction)
+			return -ENOMEM;
+
+		transaction->aid_len = aid_len;
+		transaction->params_len = params_len;
+
+		memcpy(transaction->aid, &skb->data[2], aid_len);
+		memcpy(transaction->params, &skb->data[aid_len + 4],
+		       params_len);
+
+		r = nfc_se_transaction(ndev->nfc_dev, host, transaction);
+		break;
+	default:
+		nfc_err(&ndev->nfc_dev->dev, "Unexpected event on connectivity gate\n");
+		return 1;
+	}
+	kfree_skb(skb);
+	return r;
+}
+
+void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe,
+				 u8 event, struct sk_buff *skb)
+{
+	u8 gate = ndev->hci_dev->pipes[pipe].gate;
+	u8 host = ndev->hci_dev->pipes[pipe].host;
+
+	switch (gate) {
+	case NCI_HCI_ADMIN_GATE:
+		st_nci_hci_admin_event_received(ndev, event, skb);
+	break;
+	case ST_NCI_APDU_READER_GATE:
+		st_nci_hci_apdu_reader_event_received(ndev, event, skb);
+	break;
+	case ST_NCI_CONNECTIVITY_GATE:
+		st_nci_hci_connectivity_event_received(ndev, host, event, skb);
+	break;
+	}
+}
+EXPORT_SYMBOL_GPL(st_nci_hci_event_received);
+
+void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd,
+			       struct sk_buff *skb)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+	u8 gate = ndev->hci_dev->pipes[pipe].gate;
+
+	pr_debug("cmd: %x\n", cmd);
+
+	switch (cmd) {
+	case NCI_HCI_ANY_OPEN_PIPE:
+		if (gate != ST_NCI_APDU_READER_GATE &&
+		    ndev->hci_dev->pipes[pipe].host != ST_NCI_UICC_HOST_ID)
+			ndev->hci_dev->count_pipes++;
+
+		if (ndev->hci_dev->count_pipes ==
+		    ndev->hci_dev->expected_pipes) {
+			timer_delete_sync(&info->se_info.se_active_timer);
+			info->se_info.se_active = false;
+			ndev->hci_dev->count_pipes = 0;
+			complete(&info->se_info.req_completion);
+		}
+	break;
+	}
+}
+EXPORT_SYMBOL_GPL(st_nci_hci_cmd_received);
+
+static int st_nci_control_se(struct nci_dev *ndev, u8 se_idx,
+			     u8 state)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+	int r, i;
+	struct sk_buff *sk_host_list;
+	u8 host_id;
+
+	switch (se_idx) {
+	case ST_NCI_UICC_HOST_ID:
+		ndev->hci_dev->count_pipes = 0;
+		ndev->hci_dev->expected_pipes = ST_NCI_SE_COUNT_PIPE_UICC;
+		break;
+	case ST_NCI_ESE_HOST_ID:
+		ndev->hci_dev->count_pipes = 0;
+		ndev->hci_dev->expected_pipes = ST_NCI_SE_COUNT_PIPE_EMBEDDED;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Wait for an EVT_HOT_PLUG in order to
+	 * retrieve a relevant host list.
+	 */
+	reinit_completion(&info->se_info.req_completion);
+	r = nci_nfcee_mode_set(ndev, se_idx, state);
+	if (r != NCI_STATUS_OK)
+		return r;
+
+	mod_timer(&info->se_info.se_active_timer, jiffies +
+		msecs_to_jiffies(ST_NCI_SE_TO_HOT_PLUG));
+	info->se_info.se_active = true;
+
+	/* Ignore return value and check in any case the host_list */
+	wait_for_completion_interruptible(&info->se_info.req_completion);
+
+	/* There might be some "collision" after receiving a HOT_PLUG event
+	 * This may cause the CLF to not answer to the next hci command.
+	 * There is no possible synchronization to prevent this.
+	 * Adding a small delay is the only way to solve the issue.
+	 */
+	if (info->se_info.se_status->is_ese_present &&
+	    info->se_info.se_status->is_uicc_present)
+		usleep_range(15000, 20000);
+
+	r = nci_hci_get_param(ndev, NCI_HCI_ADMIN_GATE,
+			NCI_HCI_ADMIN_PARAM_HOST_LIST, &sk_host_list);
+	if (r != NCI_HCI_ANY_OK)
+		return r;
+
+	for (i = 0; i < sk_host_list->len &&
+		sk_host_list->data[i] != se_idx; i++)
+		;
+	host_id = sk_host_list->data[i];
+	kfree_skb(sk_host_list);
+	if (state == ST_NCI_SE_MODE_ON && host_id == se_idx)
+		return se_idx;
+	else if (state == ST_NCI_SE_MODE_OFF && host_id != se_idx)
+		return se_idx;
+
+	return -1;
+}
+
+int st_nci_disable_se(struct nci_dev *ndev, u32 se_idx)
+{
+	int r;
+
+	/*
+	 * According to upper layer, se_idx == NFC_SE_UICC when
+	 * info->se_info.se_status->is_uicc_enable is true should never happen
+	 * Same for eSE.
+	 */
+	r = st_nci_control_se(ndev, se_idx, ST_NCI_SE_MODE_OFF);
+	if (r < 0) {
+		/* Do best effort to release SWP */
+		if (se_idx == NFC_SE_EMBEDDED) {
+			r = nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE,
+					ST_NCI_EVT_SE_END_OF_APDU_TRANSFER,
+					NULL, 0);
+		}
+		return r;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(st_nci_disable_se);
+
+int st_nci_enable_se(struct nci_dev *ndev, u32 se_idx)
+{
+	int r;
+
+	/*
+	 * According to upper layer, se_idx == NFC_SE_UICC when
+	 * info->se_info.se_status->is_uicc_enable is true should never happen.
+	 * Same for eSE.
+	 */
+	r = st_nci_control_se(ndev, se_idx, ST_NCI_SE_MODE_ON);
+	if (r == ST_NCI_ESE_HOST_ID) {
+		st_nci_se_get_atr(ndev);
+		r = nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE,
+				ST_NCI_EVT_SE_SOFT_RESET, NULL, 0);
+	}
+
+	if (r < 0) {
+		/*
+		 * The activation procedure failed, the secure element
+		 * is not connected. Remove from the list.
+		 */
+		nfc_remove_se(ndev->nfc_dev, se_idx);
+		return r;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(st_nci_enable_se);
+
+static int st_nci_hci_network_init(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+	struct core_conn_create_dest_spec_params *dest_params;
+	struct dest_spec_params spec_params;
+	struct nci_conn_info    *conn_info;
+	int r, dev_num;
+
+	dest_params =
+		kzalloc(sizeof(struct core_conn_create_dest_spec_params) +
+			sizeof(struct dest_spec_params), GFP_KERNEL);
+	if (dest_params == NULL)
+		return -ENOMEM;
+
+	dest_params->type = NCI_DESTINATION_SPECIFIC_PARAM_NFCEE_TYPE;
+	dest_params->length = sizeof(struct dest_spec_params);
+	spec_params.id = ndev->hci_dev->nfcee_id;
+	spec_params.protocol = NCI_NFCEE_INTERFACE_HCI_ACCESS;
+	memcpy(dest_params->value, &spec_params,
+	       sizeof(struct dest_spec_params));
+	r = nci_core_conn_create(ndev, NCI_DESTINATION_NFCEE, 1,
+				 sizeof(struct core_conn_create_dest_spec_params) +
+				 sizeof(struct dest_spec_params),
+				 dest_params);
+	if (r != NCI_STATUS_OK)
+		goto free_dest_params;
+
+	conn_info = ndev->hci_dev->conn_info;
+	if (!conn_info)
+		goto free_dest_params;
+
+	ndev->hci_dev->init_data.gate_count = ARRAY_SIZE(st_nci_gates);
+	memcpy(ndev->hci_dev->init_data.gates, st_nci_gates,
+	       sizeof(st_nci_gates));
+
+	/*
+	 * Session id must include the driver name + i2c bus addr
+	 * persistent info to discriminate 2 identical chips
+	 */
+	dev_num = find_first_zero_bit(dev_mask, ST_NCI_NUM_DEVICES);
+	if (dev_num >= ST_NCI_NUM_DEVICES) {
+		r = -ENODEV;
+		goto free_dest_params;
+	}
+
+	scnprintf(ndev->hci_dev->init_data.session_id,
+		  sizeof(ndev->hci_dev->init_data.session_id),
+		  "%s%2x", "ST21BH", dev_num);
+
+	r = nci_hci_dev_session_init(ndev);
+	if (r != NCI_HCI_ANY_OK)
+		goto free_dest_params;
+
+	/*
+	 * In factory mode, we prevent secure elements activation
+	 * by disabling nfcee on the current HCI connection id.
+	 * HCI will be used here only for proprietary commands.
+	 */
+	if (test_bit(ST_NCI_FACTORY_MODE, &info->flags))
+		r = nci_nfcee_mode_set(ndev,
+				       ndev->hci_dev->conn_info->dest_params->id,
+				       NCI_NFCEE_DISABLE);
+	else
+		r = nci_nfcee_mode_set(ndev,
+				       ndev->hci_dev->conn_info->dest_params->id,
+				       NCI_NFCEE_ENABLE);
+
+free_dest_params:
+	kfree(dest_params);
+	return r;
+}
+
+int st_nci_discover_se(struct nci_dev *ndev)
+{
+	u8 white_list[2];
+	int r, wl_size = 0;
+	int se_count = 0;
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	r = st_nci_hci_network_init(ndev);
+	if (r != 0)
+		return r;
+
+	if (test_bit(ST_NCI_FACTORY_MODE, &info->flags))
+		return 0;
+
+	if (info->se_info.se_status->is_uicc_present)
+		white_list[wl_size++] = ST_NCI_UICC_HOST_ID;
+	if (info->se_info.se_status->is_ese_present)
+		white_list[wl_size++] = ST_NCI_ESE_HOST_ID;
+
+	if (wl_size) {
+		r = nci_hci_set_param(ndev, NCI_HCI_ADMIN_GATE,
+				      NCI_HCI_ADMIN_PARAM_WHITELIST,
+				      white_list, wl_size);
+		if (r != NCI_HCI_ANY_OK)
+			return r;
+	}
+
+	if (info->se_info.se_status->is_uicc_present) {
+		nfc_add_se(ndev->nfc_dev, ST_NCI_UICC_HOST_ID, NFC_SE_UICC);
+		se_count++;
+	}
+
+	if (info->se_info.se_status->is_ese_present) {
+		nfc_add_se(ndev->nfc_dev, ST_NCI_ESE_HOST_ID, NFC_SE_EMBEDDED);
+		se_count++;
+	}
+
+	return !se_count;
+}
+EXPORT_SYMBOL_GPL(st_nci_discover_se);
+
+int st_nci_se_io(struct nci_dev *ndev, u32 se_idx,
+		       u8 *apdu, size_t apdu_length,
+		       se_io_cb_t cb, void *cb_context)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	switch (se_idx) {
+	case ST_NCI_ESE_HOST_ID:
+		info->se_info.cb = cb;
+		info->se_info.cb_context = cb_context;
+		mod_timer(&info->se_info.bwi_timer, jiffies +
+			  msecs_to_jiffies(info->se_info.wt_timeout));
+		info->se_info.bwi_active = true;
+		return nci_hci_send_event(ndev, ST_NCI_APDU_READER_GATE,
+					ST_NCI_EVT_TRANSMIT_DATA, apdu,
+					apdu_length);
+	default:
+		/* Need to free cb_context here as at the moment we can't
+		 * clearly indicate to the caller if the callback function
+		 * would be called (and free it) or not. In both cases a
+		 * negative value may be returned to the caller.
+		 */
+		kfree(cb_context);
+		return -ENODEV;
+	}
+}
+EXPORT_SYMBOL(st_nci_se_io);
+
+static void st_nci_se_wt_timeout(struct timer_list *t)
+{
+	/*
+	 * No answer from the secure element
+	 * within the defined timeout.
+	 * Let's send a reset request as recovery procedure.
+	 * According to the situation, we first try to send a software reset
+	 * to the secure element. If the next command is still not
+	 * answering in time, we send to the CLF a secure element hardware
+	 * reset request.
+	 */
+	/* hardware reset managed through VCC_UICC_OUT power supply */
+	u8 param = 0x01;
+	struct st_nci_info *info = timer_container_of(info, t,
+						      se_info.bwi_timer);
+
+	info->se_info.bwi_active = false;
+
+	if (!info->se_info.xch_error) {
+		info->se_info.xch_error = true;
+		nci_hci_send_event(info->ndlc->ndev, ST_NCI_APDU_READER_GATE,
+				ST_NCI_EVT_SE_SOFT_RESET, NULL, 0);
+	} else {
+		info->se_info.xch_error = false;
+		nci_hci_send_event(info->ndlc->ndev, ST_NCI_DEVICE_MGNT_GATE,
+				ST_NCI_EVT_SE_HARD_RESET, &param, 1);
+	}
+	info->se_info.cb(info->se_info.cb_context, NULL, 0, -ETIME);
+}
+
+static void st_nci_se_activation_timeout(struct timer_list *t)
+{
+	struct st_nci_info *info = timer_container_of(info, t,
+						      se_info.se_active_timer);
+
+	info->se_info.se_active = false;
+
+	complete(&info->se_info.req_completion);
+}
+
+int st_nci_se_init(struct nci_dev *ndev, struct st_nci_se_status *se_status)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	init_completion(&info->se_info.req_completion);
+	/* initialize timers */
+	timer_setup(&info->se_info.bwi_timer, st_nci_se_wt_timeout, 0);
+	info->se_info.bwi_active = false;
+
+	timer_setup(&info->se_info.se_active_timer,
+		    st_nci_se_activation_timeout, 0);
+	info->se_info.se_active = false;
+
+	info->se_info.xch_error = false;
+
+	info->se_info.wt_timeout =
+		ST_NCI_BWI_TO_TIMEOUT(ST_NCI_ATR_DEFAULT_BWI);
+
+	info->se_info.se_status = se_status;
+
+	return 0;
+}
+EXPORT_SYMBOL(st_nci_se_init);
+
+void st_nci_se_deinit(struct nci_dev *ndev)
+{
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	if (info->se_info.bwi_active)
+		timer_delete_sync(&info->se_info.bwi_timer);
+	if (info->se_info.se_active)
+		timer_delete_sync(&info->se_info.se_active_timer);
+
+	info->se_info.se_active = false;
+	info->se_info.bwi_active = false;
+}
+EXPORT_SYMBOL(st_nci_se_deinit);
+

linux-7.2.3/drivers/nfc/st-nci/spi.c

@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SPI Link Layer for ST NCI based Driver
+ * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/nfc.h>
+#include <linux/of.h>
+#include <net/nfc/nci.h>
+
+#include "st-nci.h"
+
+#define DRIVER_DESC "NCI NFC driver for ST_NCI"
+
+/* ndlc header */
+#define ST_NCI_FRAME_HEADROOM	1
+#define ST_NCI_FRAME_TAILROOM	0
+
+#define ST_NCI_SPI_MIN_SIZE 4   /* PCB(1) + NCI Packet header(3) */
+#define ST_NCI_SPI_MAX_SIZE 250 /* req 4.2.1 */
+
+#define ST_NCI_DRIVER_NAME "st_nci"
+#define ST_NCI_SPI_DRIVER_NAME "st_nci_spi"
+
+struct st_nci_spi_phy {
+	struct spi_device *spi_dev;
+	struct llt_ndlc *ndlc;
+
+	bool irq_active;
+
+	struct gpio_desc *gpiod_reset;
+
+	struct st_nci_se_status se_status;
+};
+
+static int st_nci_spi_enable(void *phy_id)
+{
+	struct st_nci_spi_phy *phy = phy_id;
+
+	gpiod_set_value(phy->gpiod_reset, 0);
+	usleep_range(10000, 15000);
+	gpiod_set_value(phy->gpiod_reset, 1);
+	usleep_range(80000, 85000);
+
+	if (phy->ndlc->powered == 0 && phy->irq_active == 0) {
+		enable_irq(phy->spi_dev->irq);
+		phy->irq_active = true;
+	}
+
+	return 0;
+}
+
+static void st_nci_spi_disable(void *phy_id)
+{
+	struct st_nci_spi_phy *phy = phy_id;
+
+	disable_irq_nosync(phy->spi_dev->irq);
+	phy->irq_active = false;
+}
+
+/*
+ * Writing a frame must not return the number of written bytes.
+ * It must return either zero for success, or <0 for error.
+ * In addition, it must not alter the skb
+ */
+static int st_nci_spi_write(void *phy_id, struct sk_buff *skb)
+{
+	int r;
+	struct st_nci_spi_phy *phy = phy_id;
+	struct spi_device *dev = phy->spi_dev;
+	struct sk_buff *skb_rx;
+	u8 buf[ST_NCI_SPI_MAX_SIZE + NCI_DATA_HDR_SIZE +
+	       ST_NCI_FRAME_HEADROOM + ST_NCI_FRAME_TAILROOM];
+	struct spi_transfer spi_xfer = {
+		.tx_buf = skb->data,
+		.rx_buf = buf,
+		.len = skb->len,
+	};
+
+	if (phy->ndlc->hard_fault != 0)
+		return phy->ndlc->hard_fault;
+
+	r = spi_sync_transfer(dev, &spi_xfer, 1);
+	/*
+	 * We may have received some valuable data on miso line.
+	 * Send them back in the ndlc state machine.
+	 */
+	if (!r) {
+		skb_rx = alloc_skb(skb->len, GFP_KERNEL);
+		if (!skb_rx)
+			return -ENOMEM;
+
+		skb_put(skb_rx, skb->len);
+		memcpy(skb_rx->data, buf, skb->len);
+		ndlc_recv(phy->ndlc, skb_rx);
+	}
+
+	return r;
+}
+
+/*
+ * Reads an ndlc frame and returns it in a newly allocated sk_buff.
+ * returns:
+ * 0 : if received frame is complete
+ * -EREMOTEIO : i2c read error (fatal)
+ * -EBADMSG : frame was incorrect and discarded
+ * -ENOMEM : cannot allocate skb, frame dropped
+ */
+static int st_nci_spi_read(struct st_nci_spi_phy *phy,
+			struct sk_buff **skb)
+{
+	int r;
+	u8 len;
+	u8 buf[ST_NCI_SPI_MAX_SIZE];
+	struct spi_device *dev = phy->spi_dev;
+	struct spi_transfer spi_xfer = {
+		.rx_buf = buf,
+		.len = ST_NCI_SPI_MIN_SIZE,
+	};
+
+	r = spi_sync_transfer(dev, &spi_xfer, 1);
+	if (r < 0)
+		return -EREMOTEIO;
+
+	len = be16_to_cpu(*(__be16 *) (buf + 2));
+	if (len > ST_NCI_SPI_MAX_SIZE) {
+		nfc_err(&dev->dev, "invalid frame len\n");
+		phy->ndlc->hard_fault = 1;
+		return -EBADMSG;
+	}
+
+	*skb = alloc_skb(ST_NCI_SPI_MIN_SIZE + len, GFP_KERNEL);
+	if (*skb == NULL)
+		return -ENOMEM;
+
+	skb_reserve(*skb, ST_NCI_SPI_MIN_SIZE);
+	skb_put(*skb, ST_NCI_SPI_MIN_SIZE);
+	memcpy((*skb)->data, buf, ST_NCI_SPI_MIN_SIZE);
+
+	if (!len)
+		return 0;
+
+	spi_xfer.len = len;
+	r = spi_sync_transfer(dev, &spi_xfer, 1);
+	if (r < 0) {
+		kfree_skb(*skb);
+		return -EREMOTEIO;
+	}
+
+	skb_put(*skb, len);
+	memcpy((*skb)->data + ST_NCI_SPI_MIN_SIZE, buf, len);
+
+	return 0;
+}
+
+/*
+ * Reads an ndlc frame from the chip.
+ *
+ * On ST21NFCB, IRQ goes in idle state when read starts.
+ */
+static irqreturn_t st_nci_irq_thread_fn(int irq, void *phy_id)
+{
+	struct st_nci_spi_phy *phy = phy_id;
+	struct sk_buff *skb = NULL;
+	int r;
+
+	if (!phy || !phy->ndlc || irq != phy->spi_dev->irq) {
+		WARN_ON_ONCE(1);
+		return IRQ_NONE;
+	}
+
+	if (phy->ndlc->hard_fault)
+		return IRQ_HANDLED;
+
+	if (!phy->ndlc->powered) {
+		st_nci_spi_disable(phy);
+		return IRQ_HANDLED;
+	}
+
+	r = st_nci_spi_read(phy, &skb);
+	if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG)
+		return IRQ_HANDLED;
+
+	ndlc_recv(phy->ndlc, skb);
+
+	return IRQ_HANDLED;
+}
+
+static const struct nfc_phy_ops spi_phy_ops = {
+	.write = st_nci_spi_write,
+	.enable = st_nci_spi_enable,
+	.disable = st_nci_spi_disable,
+};
+
+static const struct acpi_gpio_params reset_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_st_nci_gpios[] = {
+	{ "reset-gpios", &reset_gpios, 1 },
+	{},
+};
+
+static int st_nci_spi_probe(struct spi_device *dev)
+{
+	struct st_nci_spi_phy *phy;
+	int r;
+
+	/* Check SPI platform functionnalities */
+	if (!dev) {
+		pr_debug("%s: dev is NULL. Device is not accessible.\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	phy = devm_kzalloc(&dev->dev, sizeof(struct st_nci_spi_phy),
+			   GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->spi_dev = dev;
+
+	spi_set_drvdata(dev, phy);
+
+	r = devm_acpi_dev_add_driver_gpios(&dev->dev, acpi_st_nci_gpios);
+	if (r)
+		dev_dbg(&dev->dev, "Unable to add GPIO mapping table\n");
+
+	/* Get RESET GPIO */
+	phy->gpiod_reset = devm_gpiod_get(&dev->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(phy->gpiod_reset)) {
+		nfc_err(&dev->dev, "Unable to get RESET GPIO\n");
+		return PTR_ERR(phy->gpiod_reset);
+	}
+
+	phy->se_status.is_ese_present =
+			device_property_read_bool(&dev->dev, "ese-present");
+	phy->se_status.is_uicc_present =
+			device_property_read_bool(&dev->dev, "uicc-present");
+
+	r = ndlc_probe(phy, &spi_phy_ops, &dev->dev,
+			ST_NCI_FRAME_HEADROOM, ST_NCI_FRAME_TAILROOM,
+			&phy->ndlc, &phy->se_status);
+	if (r < 0) {
+		nfc_err(&dev->dev, "Unable to register ndlc layer\n");
+		return r;
+	}
+
+	phy->irq_active = true;
+	r = devm_request_threaded_irq(&dev->dev, dev->irq, NULL,
+				st_nci_irq_thread_fn,
+				IRQF_ONESHOT,
+				ST_NCI_SPI_DRIVER_NAME, phy);
+	if (r < 0)
+		nfc_err(&dev->dev, "Unable to register IRQ handler\n");
+
+	return r;
+}
+
+static void st_nci_spi_remove(struct spi_device *dev)
+{
+	struct st_nci_spi_phy *phy = spi_get_drvdata(dev);
+
+	ndlc_remove(phy->ndlc);
+}
+
+static struct spi_device_id st_nci_spi_id_table[] = {
+	{ST_NCI_SPI_DRIVER_NAME, 0},
+	{"st21nfcb-spi", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table);
+
+static const struct acpi_device_id st_nci_spi_acpi_match[] __maybe_unused = {
+	{"SMO2101", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, st_nci_spi_acpi_match);
+
+static const struct of_device_id of_st_nci_spi_match[] __maybe_unused = {
+	{ .compatible = "st,st21nfcb-spi", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, of_st_nci_spi_match);
+
+static struct spi_driver st_nci_spi_driver = {
+	.driver = {
+		.name = ST_NCI_SPI_DRIVER_NAME,
+		.of_match_table = of_match_ptr(of_st_nci_spi_match),
+		.acpi_match_table = ACPI_PTR(st_nci_spi_acpi_match),
+	},
+	.probe = st_nci_spi_probe,
+	.id_table = st_nci_spi_id_table,
+	.remove = st_nci_spi_remove,
+};
+module_spi_driver(st_nci_spi_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);

linux-7.2.3/drivers/nfc/st-nci/st-nci.h

@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * NCI based Driver for STMicroelectronics NFC Chip
+ *
+ * Copyright (C) 2014  STMicroelectronics SAS. All rights reserved.
+ */
+
+#ifndef __LOCAL_ST_NCI_H_
+#define __LOCAL_ST_NCI_H_
+
+#include "ndlc.h"
+
+/* Define private flags: */
+#define ST_NCI_RUNNING			1
+
+#define ST_NCI_CORE_PROP                0x01
+#define ST_NCI_SET_NFC_MODE             0x02
+
+/*
+ * ref ISO7816-3 chap 8.1. the initial character TS is followed by a
+ * sequence of at most 32 characters.
+ */
+#define ST_NCI_ESE_MAX_LENGTH  33
+
+#define ST_NCI_DEVICE_MGNT_GATE		0x01
+
+#define ST_NCI_VENDOR_OUI 0x0080E1 /* STMicroelectronics */
+#define ST_NCI_FACTORY_MODE 2
+
+struct nci_mode_set_cmd {
+	u8 cmd_type;
+	u8 mode;
+} __packed;
+
+struct nci_mode_set_rsp {
+	u8 status;
+} __packed;
+
+struct st_nci_se_status {
+	bool is_ese_present;
+	bool is_uicc_present;
+};
+
+struct st_nci_se_info {
+	struct st_nci_se_status *se_status;
+	u8 atr[ST_NCI_ESE_MAX_LENGTH];
+	struct completion req_completion;
+
+	struct timer_list bwi_timer;
+	int wt_timeout; /* in msecs */
+	bool bwi_active;
+
+	struct timer_list se_active_timer;
+	bool se_active;
+
+	bool xch_error;
+
+	se_io_cb_t cb;
+	void *cb_context;
+};
+
+/**
+ * enum nfc_vendor_cmds - supported nfc vendor commands
+ *
+ * @FACTORY_MODE: Allow to set the driver into a mode where no secure element
+ *	are activated. It does not consider any NFC_ATTR_VENDOR_DATA.
+ * @HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command.
+ *	It does not consider any NFC_ATTR_VENDOR_DATA.
+ * @HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example
+ *	RF trimmings or low level drivers configurations (I2C, SPI, SWP).
+ * @HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing
+ *	table following RF technology, CLF mode or protocol.
+ * @HCI_DM_GET_INFO: Allow to retrieve CLF information.
+ * @HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low
+ *	level drivers configurations or RF trimmings.
+ * @HCI_DM_DIRECT_LOAD: Allow to load a firmware into the CLF. A complete
+ *	packet can be more than 8KB.
+ * @HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF
+ *	configuration changes without CLF power off.
+ * @HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the
+ *	white list).
+ * @HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF
+ *	technology. When using this command to anti-collision is done.
+ * @LOOPBACK: Allow to echo a command and test the Dh to CLF connectivity.
+ * @HCI_DM_VDC_MEASUREMENT_VALUE: Allow to measure the field applied on the
+ *	CLF antenna. A value between 0 and 0x0f is returned. 0 is maximum.
+ * @HCI_DM_FWUPD_START: Allow to put CLF into firmware update mode. It is a
+ *	specific CLF command as there is no GPIO for this.
+ * @HCI_DM_FWUPD_END:  Allow to complete firmware update.
+ * @HCI_DM_VDC_VALUE_COMPARISON: Allow to compare the field applied on the
+ *	CLF antenna to a reference value.
+ * @MANUFACTURER_SPECIFIC: Allow to retrieve manufacturer specific data
+ *	received during a NCI_CORE_INIT_CMD.
+ */
+enum nfc_vendor_cmds {
+	FACTORY_MODE,
+	HCI_CLEAR_ALL_PIPES,
+	HCI_DM_PUT_DATA,
+	HCI_DM_UPDATE_AID,
+	HCI_DM_GET_INFO,
+	HCI_DM_GET_DATA,
+	HCI_DM_DIRECT_LOAD,
+	HCI_DM_RESET,
+	HCI_GET_PARAM,
+	HCI_DM_FIELD_GENERATOR,
+	LOOPBACK,
+	HCI_DM_FWUPD_START,
+	HCI_DM_FWUPD_END,
+	HCI_DM_VDC_MEASUREMENT_VALUE,
+	HCI_DM_VDC_VALUE_COMPARISON,
+	MANUFACTURER_SPECIFIC,
+};
+
+struct st_nci_info {
+	struct llt_ndlc *ndlc;
+	unsigned long flags;
+
+	struct st_nci_se_info se_info;
+};
+
+void st_nci_remove(struct nci_dev *ndev);
+int st_nci_probe(struct llt_ndlc *ndlc, int phy_headroom,
+		 int phy_tailroom, struct st_nci_se_status *se_status);
+
+int st_nci_se_init(struct nci_dev *ndev, struct st_nci_se_status *se_status);
+void st_nci_se_deinit(struct nci_dev *ndev);
+
+int st_nci_discover_se(struct nci_dev *ndev);
+int st_nci_enable_se(struct nci_dev *ndev, u32 se_idx);
+int st_nci_disable_se(struct nci_dev *ndev, u32 se_idx);
+int st_nci_se_io(struct nci_dev *ndev, u32 se_idx,
+				u8 *apdu, size_t apdu_length,
+				se_io_cb_t cb, void *cb_context);
+int st_nci_hci_load_session(struct nci_dev *ndev);
+void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe,
+					u8 event, struct sk_buff *skb);
+void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd,
+						struct sk_buff *skb);
+
+int st_nci_vendor_cmds_init(struct nci_dev *ndev);
+
+#endif /* __LOCAL_ST_NCI_H_ */

linux-7.2.3/drivers/nfc/st-nci/vendor_cmds.c

@@ -0,0 +1,462 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Proprietary commands extension for STMicroelectronics NFC NCI Chip
+ *
+ * Copyright (C) 2014-2015  STMicroelectronics SAS. All rights reserved.
+ */
+
+#include <net/genetlink.h>
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <linux/delay.h>
+#include <net/nfc/nci_core.h>
+
+#include "st-nci.h"
+
+#define ST_NCI_HCI_DM_GETDATA			0x10
+#define ST_NCI_HCI_DM_PUTDATA			0x11
+#define ST_NCI_HCI_DM_LOAD			0x12
+#define ST_NCI_HCI_DM_GETINFO			0x13
+#define ST_NCI_HCI_DM_FWUPD_START		0x14
+#define ST_NCI_HCI_DM_FWUPD_STOP		0x15
+#define ST_NCI_HCI_DM_UPDATE_AID		0x20
+#define ST_NCI_HCI_DM_RESET			0x3e
+
+#define ST_NCI_HCI_DM_FIELD_GENERATOR		0x32
+#define ST_NCI_HCI_DM_VDC_MEASUREMENT_VALUE	0x33
+#define ST_NCI_HCI_DM_VDC_VALUE_COMPARISON	0x34
+
+#define ST_NCI_FACTORY_MODE_ON			1
+#define ST_NCI_FACTORY_MODE_OFF			0
+
+#define ST_NCI_EVT_POST_DATA			0x02
+
+struct get_param_data {
+	u8 gate;
+	u8 data;
+} __packed;
+
+static int st_nci_factory_mode(struct nfc_dev *dev, void *data,
+			       size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+	struct st_nci_info *info = nci_get_drvdata(ndev);
+
+	if (data_len != 1)
+		return -EINVAL;
+
+	pr_debug("factory mode: %x\n", ((u8 *)data)[0]);
+
+	switch (((u8 *)data)[0]) {
+	case ST_NCI_FACTORY_MODE_ON:
+		test_and_set_bit(ST_NCI_FACTORY_MODE, &info->flags);
+	break;
+	case ST_NCI_FACTORY_MODE_OFF:
+		clear_bit(ST_NCI_FACTORY_MODE, &info->flags);
+	break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int st_nci_hci_clear_all_pipes(struct nfc_dev *dev, void *data,
+				      size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	return nci_hci_clear_all_pipes(ndev);
+}
+
+static int st_nci_hci_dm_put_data(struct nfc_dev *dev, void *data,
+				  size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+				ST_NCI_HCI_DM_PUTDATA, data,
+				data_len, NULL);
+}
+
+static int st_nci_hci_dm_update_aid(struct nfc_dev *dev, void *data,
+				    size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			ST_NCI_HCI_DM_UPDATE_AID, data, data_len, NULL);
+}
+
+static int st_nci_hci_dm_get_info(struct nfc_dev *dev, void *data,
+				  size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, ST_NCI_HCI_DM_GETINFO,
+			     data, data_len, &skb);
+	if (r)
+		return r;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,
+					     HCI_DM_GET_INFO, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+
+free_skb:
+	kfree_skb(skb);
+	return r;
+}
+
+static int st_nci_hci_dm_get_data(struct nfc_dev *dev, void *data,
+				  size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE, ST_NCI_HCI_DM_GETDATA,
+			     data, data_len, &skb);
+	if (r)
+		return r;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,
+					     HCI_DM_GET_DATA, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+
+free_skb:
+	kfree_skb(skb);
+	return r;
+}
+
+static int st_nci_hci_dm_fwupd_start(struct nfc_dev *dev, void *data,
+				     size_t data_len)
+{
+	int r;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	dev->fw_download_in_progress = true;
+	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			ST_NCI_HCI_DM_FWUPD_START, data, data_len, NULL);
+	if (r)
+		dev->fw_download_in_progress = false;
+
+	return r;
+}
+
+static int st_nci_hci_dm_fwupd_end(struct nfc_dev *dev, void *data,
+				   size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			ST_NCI_HCI_DM_FWUPD_STOP, data, data_len, NULL);
+}
+
+static int st_nci_hci_dm_direct_load(struct nfc_dev *dev, void *data,
+				     size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	if (dev->fw_download_in_progress) {
+		dev->fw_download_in_progress = false;
+		return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+				ST_NCI_HCI_DM_LOAD, data, data_len, NULL);
+	}
+	return -EPROTO;
+}
+
+static int st_nci_hci_dm_reset(struct nfc_dev *dev, void *data,
+			       size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			ST_NCI_HCI_DM_RESET, data, data_len, NULL);
+	msleep(200);
+
+	return 0;
+}
+
+static int st_nci_hci_get_param(struct nfc_dev *dev, void *data,
+				size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+	struct get_param_data *param = (struct get_param_data *)data;
+
+	if (data_len < sizeof(struct get_param_data))
+		return -EPROTO;
+
+	r = nci_hci_get_param(ndev, param->gate, param->data, &skb);
+	if (r)
+		return r;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,
+					     HCI_GET_PARAM, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+
+free_skb:
+	kfree_skb(skb);
+	return r;
+}
+
+static int st_nci_hci_dm_field_generator(struct nfc_dev *dev, void *data,
+					 size_t data_len)
+{
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	return nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+				ST_NCI_HCI_DM_FIELD_GENERATOR, data, data_len, NULL);
+}
+
+static int st_nci_hci_dm_vdc_measurement_value(struct nfc_dev *dev, void *data,
+					       size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	if (data_len != 4)
+		return -EPROTO;
+
+	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			     ST_NCI_HCI_DM_VDC_MEASUREMENT_VALUE,
+			     data, data_len, &skb);
+	if (r)
+		return r;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,
+				HCI_DM_VDC_MEASUREMENT_VALUE, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+
+free_skb:
+	kfree_skb(skb);
+	return r;
+}
+
+static int st_nci_hci_dm_vdc_value_comparison(struct nfc_dev *dev, void *data,
+					      size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	if (data_len != 2)
+		return -EPROTO;
+
+	r = nci_hci_send_cmd(ndev, ST_NCI_DEVICE_MGNT_GATE,
+			     ST_NCI_HCI_DM_VDC_VALUE_COMPARISON,
+			     data, data_len, &skb);
+	if (r)
+		return r;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,
+					HCI_DM_VDC_VALUE_COMPARISON, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+
+free_skb:
+	kfree_skb(skb);
+	return r;
+}
+
+static int st_nci_loopback(struct nfc_dev *dev, void *data,
+			   size_t data_len)
+{
+	int r;
+	struct sk_buff *msg, *skb;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	if (data_len <= 0)
+		return -EPROTO;
+
+	r = nci_nfcc_loopback(ndev, data, data_len, &skb);
+	if (r < 0)
+		return r;
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,
+					     LOOPBACK, skb->len);
+	if (!msg) {
+		r = -ENOMEM;
+		goto free_skb;
+	}
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, skb->len, skb->data)) {
+		kfree_skb(msg);
+		r = -ENOBUFS;
+		goto free_skb;
+	}
+
+	r = nfc_vendor_cmd_reply(msg);
+free_skb:
+	kfree_skb(skb);
+	return r;
+}
+
+static int st_nci_manufacturer_specific(struct nfc_dev *dev, void *data,
+					size_t data_len)
+{
+	struct sk_buff *msg;
+	struct nci_dev *ndev = nfc_get_drvdata(dev);
+
+	msg = nfc_vendor_cmd_alloc_reply_skb(dev, ST_NCI_VENDOR_OUI,
+					MANUFACTURER_SPECIFIC,
+					sizeof(ndev->manufact_specific_info));
+	if (!msg)
+		return -ENOMEM;
+
+	if (nla_put(msg, NFC_ATTR_VENDOR_DATA, sizeof(ndev->manufact_specific_info),
+		    &ndev->manufact_specific_info)) {
+		kfree_skb(msg);
+		return -ENOBUFS;
+	}
+
+	return nfc_vendor_cmd_reply(msg);
+}
+
+static const struct nfc_vendor_cmd st_nci_vendor_cmds[] = {
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = FACTORY_MODE,
+		.doit = st_nci_factory_mode,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_CLEAR_ALL_PIPES,
+		.doit = st_nci_hci_clear_all_pipes,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_PUT_DATA,
+		.doit = st_nci_hci_dm_put_data,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_UPDATE_AID,
+		.doit = st_nci_hci_dm_update_aid,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_GET_INFO,
+		.doit = st_nci_hci_dm_get_info,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_GET_DATA,
+		.doit = st_nci_hci_dm_get_data,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_DIRECT_LOAD,
+		.doit = st_nci_hci_dm_direct_load,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_RESET,
+		.doit = st_nci_hci_dm_reset,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_GET_PARAM,
+		.doit = st_nci_hci_get_param,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_FIELD_GENERATOR,
+		.doit = st_nci_hci_dm_field_generator,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_FWUPD_START,
+		.doit = st_nci_hci_dm_fwupd_start,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_FWUPD_END,
+		.doit = st_nci_hci_dm_fwupd_end,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = LOOPBACK,
+		.doit = st_nci_loopback,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_VDC_MEASUREMENT_VALUE,
+		.doit = st_nci_hci_dm_vdc_measurement_value,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = HCI_DM_VDC_VALUE_COMPARISON,
+		.doit = st_nci_hci_dm_vdc_value_comparison,
+	},
+	{
+		.vendor_id = ST_NCI_VENDOR_OUI,
+		.subcmd = MANUFACTURER_SPECIFIC,
+		.doit = st_nci_manufacturer_specific,
+	},
+};
+
+int st_nci_vendor_cmds_init(struct nci_dev *ndev)
+{
+	return nci_set_vendor_cmds(ndev, st_nci_vendor_cmds,
+				   sizeof(st_nci_vendor_cmds));
+}
+EXPORT_SYMBOL(st_nci_vendor_cmds_init);