Resguardo inicial

linux-7.2.3/drivers/platform/x86/intel/int3472/Kconfig

@@ -0,0 +1,31 @@
+config INTEL_SKL_INT3472
+	tristate "Intel SkyLake ACPI INT3472 Driver"
+	depends on ACPI
+	depends on COMMON_CLK
+	depends on I2C
+	depends on GPIOLIB
+	depends on LEDS_CLASS
+	depends on REGULATOR
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  This driver adds power controller support for the Intel SkyCam
+	  devices found on the Intel SkyLake platforms.
+
+	  The INT3472 is a camera power controller, a logical device found on
+	  Intel Skylake-based systems that can map to different hardware
+	  devices depending on the platform. On machines designed for Chrome OS
+	  it maps to a TPS68470 camera PMIC. On machines designed for Windows,
+	  it maps to either a TP68470 camera PMIC, a uP6641Q sensor PMIC, or a
+	  set of discrete GPIOs and power gates.
+
+	  If your device was designed for Chrome OS, this driver will provide
+	  an ACPI OpRegion, which must be available before any of the devices
+	  using it are probed. For this reason, you should select Y if your
+	  device was designed for ChromeOS. For the same reason the
+	  I2C_DESIGNWARE_PLATFORM option must be set to Y too.
+
+	  Say Y or M here if you have a SkyLake device designed for use
+	  with Windows or ChromeOS. Say N here if you are not sure.
+
+	  The module will be named "intel-skl-int3472".

linux-7.2.3/drivers/platform/x86/intel/int3472/Makefile

@@ -0,0 +1,8 @@
+obj-$(CONFIG_INTEL_SKL_INT3472)		+= intel_skl_int3472_discrete.o \
+					   intel_skl_int3472_tps68470.o \
+					   intel_skl_int3472_common.o
+intel_skl_int3472_discrete-y		:= discrete.o discrete_quirks.o \
+					   clk_and_regulator.o led.o
+intel_skl_int3472_tps68470-y		:= tps68470.o tps68470_board_data.o
+
+intel_skl_int3472_common-y		+= common.o

linux-7.2.3/drivers/platform/x86/intel/int3472/clk_and_regulator.c

@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Author: Dan Scally <djrscally@gmail.com> */
+
+#include <linux/acpi.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_data/x86/int3472.h>
+#include <linux/regulator/driver.h>
+#include <linux/slab.h>
+
+/*
+ * 82c0d13a-78c5-4244-9bb1-eb8b539a8d11
+ * This _DSM GUID allows controlling the sensor clk when it is not controlled
+ * through a GPIO.
+ */
+static const guid_t img_clk_guid =
+	GUID_INIT(0x82c0d13a, 0x78c5, 0x4244,
+		  0x9b, 0xb1, 0xeb, 0x8b, 0x53, 0x9a, 0x8d, 0x11);
+
+static void skl_int3472_enable_clk(struct int3472_clock *clk, int enable)
+{
+	struct int3472_discrete_device *int3472 = to_int3472_device(clk);
+	union acpi_object args[3];
+	union acpi_object argv4;
+
+	if (clk->ena_gpio) {
+		gpiod_set_value_cansleep(clk->ena_gpio, enable);
+		return;
+	}
+
+	args[0].integer.type = ACPI_TYPE_INTEGER;
+	args[0].integer.value = clk->imgclk_index;
+	args[1].integer.type = ACPI_TYPE_INTEGER;
+	args[1].integer.value = enable;
+	args[2].integer.type = ACPI_TYPE_INTEGER;
+	args[2].integer.value = 1;
+
+	argv4.type = ACPI_TYPE_PACKAGE;
+	argv4.package.count = 3;
+	argv4.package.elements = args;
+
+	acpi_evaluate_dsm(acpi_device_handle(int3472->adev), &img_clk_guid,
+			  0, 1, &argv4);
+}
+
+/*
+ * The regulators have to have .ops to be valid, but the only ops we actually
+ * support are .enable and .disable which are handled via .ena_gpiod. Pass an
+ * empty struct to clear the check without lying about capabilities.
+ */
+static const struct regulator_ops int3472_gpio_regulator_ops;
+
+static int skl_int3472_clk_prepare(struct clk_hw *hw)
+{
+	skl_int3472_enable_clk(to_int3472_clk(hw), 1);
+	return 0;
+}
+
+static void skl_int3472_clk_unprepare(struct clk_hw *hw)
+{
+	skl_int3472_enable_clk(to_int3472_clk(hw), 0);
+}
+
+static int skl_int3472_clk_enable(struct clk_hw *hw)
+{
+	/*
+	 * We're just turning a GPIO on to enable the clock, which operation
+	 * has the potential to sleep. Given .enable() cannot sleep, but
+	 * .prepare() can, we toggle the GPIO in .prepare() instead. Thus,
+	 * nothing to do here.
+	 */
+	return 0;
+}
+
+static void skl_int3472_clk_disable(struct clk_hw *hw)
+{
+	/* Likewise, nothing to do here... */
+}
+
+static unsigned int skl_int3472_get_clk_frequency(struct int3472_discrete_device *int3472)
+{
+	union acpi_object *obj;
+	unsigned int freq;
+
+	obj = skl_int3472_get_acpi_buffer(int3472->sensor, "SSDB");
+	if (IS_ERR(obj))
+		return 0; /* report rate as 0 on error */
+
+	if (obj->buffer.length < CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET + sizeof(u32)) {
+		dev_err(int3472->dev, "The buffer is too small\n");
+		kfree(obj);
+		return 0;
+	}
+
+	freq = *(u32 *)(obj->buffer.pointer + CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET);
+
+	kfree(obj);
+	return freq;
+}
+
+static unsigned long skl_int3472_clk_recalc_rate(struct clk_hw *hw,
+						 unsigned long parent_rate)
+{
+	struct int3472_clock *clk = to_int3472_clk(hw);
+
+	return clk->frequency;
+}
+
+static const struct clk_ops skl_int3472_clock_ops = {
+	.prepare = skl_int3472_clk_prepare,
+	.unprepare = skl_int3472_clk_unprepare,
+	.enable = skl_int3472_clk_enable,
+	.disable = skl_int3472_clk_disable,
+	.recalc_rate = skl_int3472_clk_recalc_rate,
+};
+
+static int skl_int3472_register_clock(struct int3472_discrete_device *int3472)
+{
+	struct acpi_device *adev = int3472->adev;
+	struct clk_init_data init = {
+		.ops = &skl_int3472_clock_ops,
+		.flags = CLK_GET_RATE_NOCACHE,
+	};
+	int ret;
+
+	init.name = kasprintf(GFP_KERNEL, "%s-clk", acpi_dev_name(adev));
+	if (!init.name)
+		return -ENOMEM;
+
+	int3472->clock.frequency = skl_int3472_get_clk_frequency(int3472);
+	int3472->clock.clk_hw.init = &init;
+	int3472->clock.clk = clk_register(&adev->dev, &int3472->clock.clk_hw);
+	if (IS_ERR(int3472->clock.clk)) {
+		ret = PTR_ERR(int3472->clock.clk);
+		goto out_free_init_name;
+	}
+
+	int3472->clock.cl = clkdev_create(int3472->clock.clk, NULL, int3472->sensor_name);
+	if (!int3472->clock.cl) {
+		ret = -ENOMEM;
+		goto err_unregister_clk;
+	}
+
+	kfree(init.name);
+	return 0;
+
+err_unregister_clk:
+	clk_unregister(int3472->clock.clk);
+out_free_init_name:
+	kfree(init.name);
+	return ret;
+}
+
+int skl_int3472_register_dsm_clock(struct int3472_discrete_device *int3472)
+{
+	if (int3472->clock.cl)
+		return 0; /* A GPIO controlled clk has already been registered */
+
+	if (!acpi_check_dsm(int3472->adev->handle, &img_clk_guid, 0, BIT(1)))
+		return 0; /* DSM clock control is not available */
+
+	return skl_int3472_register_clock(int3472);
+}
+
+int skl_int3472_register_gpio_clock(struct int3472_discrete_device *int3472,
+				    struct gpio_desc *gpio)
+{
+	if (int3472->clock.cl)
+		return -EBUSY;
+
+	int3472->clock.ena_gpio = gpio;
+
+	return skl_int3472_register_clock(int3472);
+}
+
+void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472)
+{
+	if (!int3472->clock.cl)
+		return;
+
+	clkdev_drop(int3472->clock.cl);
+	clk_unregister(int3472->clock.clk);
+	gpiod_put(int3472->clock.ena_gpio);
+}
+
+int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
+				   struct gpio_desc *gpio,
+				   unsigned int enable_time,
+				   const char *supply_name,
+				   const char *second_sensor)
+{
+	struct regulator_init_data init_data = { };
+	struct int3472_gpio_regulator *regulator;
+	struct regulator_config cfg = { };
+	int i, j;
+
+	if (int3472->n_regulator_gpios >= INT3472_MAX_REGULATORS) {
+		dev_err(int3472->dev, "Too many regulators mapped\n");
+		return -EINVAL;
+	}
+
+	if (strlen(supply_name) >= GPIO_SUPPLY_NAME_LENGTH) {
+		dev_err(int3472->dev, "supply-name '%s' length too long\n", supply_name);
+		return -E2BIG;
+	}
+
+	regulator = &int3472->regulators[int3472->n_regulator_gpios];
+	string_upper(regulator->supply_name_upper, supply_name);
+
+	/* The below code assume that map-count is 2 (upper- and lower-case) */
+	static_assert(GPIO_REGULATOR_SUPPLY_MAP_COUNT == 2);
+
+	for (i = 0, j = 0; i < GPIO_REGULATOR_SUPPLY_MAP_COUNT; i++) {
+		const char *supply = i ? regulator->supply_name_upper : supply_name;
+
+		regulator->supply_map[j].supply = supply;
+		regulator->supply_map[j].dev_name = int3472->sensor_name;
+		j++;
+
+		if (second_sensor) {
+			regulator->supply_map[j].supply = supply;
+			regulator->supply_map[j].dev_name = second_sensor;
+			j++;
+		}
+	}
+
+	init_data.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
+	init_data.consumer_supplies = regulator->supply_map;
+	init_data.num_consumer_supplies = j;
+
+	snprintf(regulator->regulator_name, sizeof(regulator->regulator_name), "%s-%s",
+		 acpi_dev_name(int3472->adev), supply_name);
+
+	regulator->rdesc = INT3472_REGULATOR(regulator->regulator_name,
+					     &int3472_gpio_regulator_ops,
+					     enable_time, GPIO_REGULATOR_OFF_ON_DELAY);
+
+	cfg.dev = &int3472->adev->dev;
+	cfg.init_data = &init_data;
+	cfg.ena_gpiod = gpio;
+
+	regulator->rdev = regulator_register(int3472->dev, &regulator->rdesc, &cfg);
+	if (IS_ERR(regulator->rdev))
+		return PTR_ERR(regulator->rdev);
+
+	int3472->n_regulator_gpios++;
+	return 0;
+}
+
+void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472)
+{
+	for (int i = 0; i < int3472->n_regulator_gpios; i++)
+		regulator_unregister(int3472->regulators[i].rdev);
+}

linux-7.2.3/drivers/platform/x86/intel/int3472/common.c

@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Author: Dan Scally <djrscally@gmail.com> */
+
+#include <linux/acpi.h>
+#include <linux/platform_data/x86/int3472.h>
+#include <linux/slab.h>
+
+union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, char *id)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	acpi_handle handle = adev->handle;
+	union acpi_object *obj;
+	acpi_status status;
+
+	status = acpi_evaluate_object(handle, id, NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		return ERR_PTR(-ENODEV);
+
+	obj = buffer.pointer;
+	if (!obj)
+		return ERR_PTR(-ENODEV);
+
+	if (obj->type != ACPI_TYPE_BUFFER) {
+		acpi_handle_err(handle, "%s object is not an ACPI buffer\n", id);
+		kfree(obj);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return obj;
+}
+EXPORT_SYMBOL_NS_GPL(skl_int3472_get_acpi_buffer, "INTEL_INT3472");
+
+int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb)
+{
+	union acpi_object *obj;
+	int ret;
+
+	obj = skl_int3472_get_acpi_buffer(adev, "CLDB");
+	if (IS_ERR(obj))
+		return PTR_ERR(obj);
+
+	if (obj->buffer.length > sizeof(*cldb)) {
+		acpi_handle_err(adev->handle, "The CLDB buffer is too large\n");
+		ret = -EINVAL;
+		goto out_free_obj;
+	}
+
+	memcpy(cldb, obj->buffer.pointer, obj->buffer.length);
+	ret = 0;
+
+out_free_obj:
+	kfree(obj);
+	return ret;
+}
+EXPORT_SYMBOL_NS_GPL(skl_int3472_fill_cldb, "INTEL_INT3472");
+
+/* sensor_adev_ret may be NULL, name_ret must not be NULL */
+int skl_int3472_get_sensor_adev_and_name(struct device *dev,
+					 struct acpi_device **sensor_adev_ret,
+					 const char **name_ret)
+{
+	struct acpi_device *adev = ACPI_COMPANION(dev);
+	struct acpi_device *sensor;
+	int ret = 0;
+
+	sensor = acpi_dev_get_next_consumer_dev(adev, NULL);
+	if (!sensor) {
+		dev_err(dev, "INT3472 seems to have no dependents.\n");
+		return -ENODEV;
+	}
+
+	dev_dbg(dev, "Sensor name %s\n", acpi_dev_name(sensor));
+
+	*name_ret = devm_kasprintf(dev, GFP_KERNEL, I2C_DEV_NAME_FORMAT,
+				   acpi_dev_name(sensor));
+	if (!*name_ret)
+		ret = -ENOMEM;
+
+	if (ret == 0 && sensor_adev_ret)
+		*sensor_adev_ret = sensor;
+	else
+		acpi_dev_put(sensor);
+
+	return ret;
+}
+EXPORT_SYMBOL_NS_GPL(skl_int3472_get_sensor_adev_and_name, "INTEL_INT3472");
+
+MODULE_DESCRIPTION("Intel SkyLake INT3472 ACPI Device Driver library");
+MODULE_AUTHOR("Daniel Scally <djrscally@gmail.com>");
+MODULE_LICENSE("GPL");

linux-7.2.3/drivers/platform/x86/intel/int3472/discrete.c

@@ -0,0 +1,531 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Author: Dan Scally <djrscally@gmail.com> */
+
+#include <linux/acpi.h>
+#include <linux/array_size.h>
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/overflow.h>
+#include <linux/platform_data/x86/int3472.h>
+#include <linux/platform_device.h>
+#include <linux/string_choices.h>
+#include <linux/uuid.h>
+
+/*
+ * 79234640-9e10-4fea-a5c1-b5aa8b19756f
+ * This _DSM GUID returns information about the GPIO lines mapped to a
+ * discrete INT3472 device. Function number 1 returns a count of the GPIO
+ * lines that are mapped. Subsequent functions return 32 bit ints encoding
+ * information about the GPIO line, including its purpose.
+ */
+static const guid_t int3472_gpio_guid =
+	GUID_INIT(0x79234640, 0x9e10, 0x4fea,
+		  0xa5, 0xc1, 0xb5, 0xaa, 0x8b, 0x19, 0x75, 0x6f);
+
+#define INT3472_GPIO_DSM_TYPE				GENMASK(7, 0)
+#define INT3472_GPIO_DSM_PIN				GENMASK(15, 8)
+#define INT3472_GPIO_DSM_SENSOR_ON_VAL			GENMASK(31, 24)
+
+/*
+ * 822ace8f-2814-4174-a56b-5f029fe079ee
+ * This _DSM GUID returns a string from the sensor device, which acts as a
+ * module identifier.
+ */
+static const guid_t cio2_sensor_module_guid =
+	GUID_INIT(0x822ace8f, 0x2814, 0x4174,
+		  0xa5, 0x6b, 0x5f, 0x02, 0x9f, 0xe0, 0x79, 0xee);
+
+static void skl_int3472_log_sensor_module_name(struct int3472_discrete_device *int3472)
+{
+	union acpi_object *obj;
+
+	obj = acpi_evaluate_dsm_typed(int3472->sensor->handle,
+				      &cio2_sensor_module_guid, 0x00,
+				      0x01, NULL, ACPI_TYPE_STRING);
+	if (obj) {
+		dev_dbg(int3472->dev, "Sensor module id: '%s'\n", obj->string.pointer);
+		ACPI_FREE(obj);
+	}
+}
+
+static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry,
+					 struct acpi_resource_gpio *agpio,
+					 const char *con_id, unsigned long gpio_flags)
+{
+	char *path = agpio->resource_source.string_ptr;
+	struct acpi_device *adev;
+	acpi_handle handle;
+	acpi_status status;
+
+	status = acpi_get_handle(NULL, path, &handle);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	adev = acpi_fetch_acpi_dev(handle);
+	if (!adev)
+		return -ENODEV;
+
+	*table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], con_id, gpio_flags);
+
+	return 0;
+}
+
+static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472,
+					  struct acpi_resource_gpio *agpio,
+					  const char *con_id, unsigned long gpio_flags)
+{
+	int ret;
+
+	if (int3472->n_sensor_gpios >= INT3472_MAX_SENSOR_GPIOS) {
+		dev_warn(int3472->dev, "Too many GPIOs mapped\n");
+		return -EINVAL;
+	}
+
+	ret = skl_int3472_fill_gpiod_lookup(&int3472->gpios.table[int3472->n_sensor_gpios],
+					    agpio, con_id, gpio_flags);
+	if (ret)
+		return ret;
+
+	int3472->n_sensor_gpios++;
+
+	return 0;
+}
+
+/* This should *really* only be used when there's no other way... */
+static struct gpio_desc *
+skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
+				       struct acpi_resource_gpio *agpio,
+				       const char *con_id, unsigned long gpio_flags)
+{
+	struct gpio_desc *desc;
+	int ret;
+
+	struct gpiod_lookup_table *lookup __free(kfree) =
+			kzalloc_flex(*lookup, table, 2);
+	if (!lookup)
+		return ERR_PTR(-ENOMEM);
+
+	lookup->dev_id = dev_name(int3472->dev);
+	ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, con_id, gpio_flags);
+	if (ret)
+		return ERR_PTR(ret);
+
+	gpiod_add_lookup_table(lookup);
+	desc = gpiod_get(int3472->dev, con_id, GPIOD_OUT_LOW);
+	gpiod_remove_lookup_table(lookup);
+
+	return desc;
+}
+
+/**
+ * struct int3472_gpio_map - Map GPIOs to whatever is expected by the
+ * sensor driver (as in DT bindings)
+ * @hid: The ACPI HID of the device without the instance number e.g. INT347E
+ * @type_from: The GPIO type from ACPI ?SDT
+ * @type_to: The assigned GPIO type, typically same as @type_from
+ * @enable_time_us: Enable time in usec for GPIOs mapped to regulators
+ * @con_id: The name of the GPIO for the device
+ * @polarity_low: GPIO_ACTIVE_LOW true if the @polarity_low is true,
+ * GPIO_ACTIVE_HIGH otherwise
+ */
+struct int3472_gpio_map {
+	const char *hid;
+	u8 type_from;
+	u8 type_to;
+	bool polarity_low;
+	unsigned int enable_time_us;
+	const char *con_id;
+};
+
+static const struct int3472_gpio_map int3472_gpio_map[] = {
+	{	/* mt9m114 designs declare a powerdown pin which controls the regulators */
+		.hid = "INT33F0",
+		.type_from = INT3472_GPIO_TYPE_POWERDOWN,
+		.type_to = INT3472_GPIO_TYPE_POWER_ENABLE,
+		.con_id = "vdd",
+		.enable_time_us = GPIO_REGULATOR_ENABLE_TIME,
+	},
+	{	/* ov7251 driver / DT-bindings expect "enable" as con_id for reset */
+		.hid = "INT347E",
+		.type_from = INT3472_GPIO_TYPE_RESET,
+		.type_to = INT3472_GPIO_TYPE_RESET,
+		.con_id = "enable",
+	},
+	{	/* ov08x40's handshake pin needs a 45 ms delay on some HP laptops */
+		.hid = "OVTI08F4",
+		.type_from = INT3472_GPIO_TYPE_HANDSHAKE,
+		.type_to = INT3472_GPIO_TYPE_HANDSHAKE,
+		.con_id = "dvdd",
+		.enable_time_us = 45 * USEC_PER_MSEC,
+	},
+};
+
+static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3472, u8 *type,
+					    const char **con_id, unsigned long *gpio_flags,
+					    unsigned int *enable_time_us)
+{
+	struct acpi_device *adev = int3472->sensor;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(int3472_gpio_map); i++) {
+		/*
+		 * Map the firmware-provided GPIO to whatever a driver expects
+		 * (as in DT bindings). First check if the type matches with the
+		 * GPIO map, then further check that the device _HID matches.
+		 */
+		if (*type != int3472_gpio_map[i].type_from)
+			continue;
+
+		if (!acpi_dev_hid_uid_match(adev, int3472_gpio_map[i].hid, NULL))
+			continue;
+
+		dev_dbg(int3472->dev, "mapping type 0x%02x pin to 0x%02x %s\n",
+			*type, int3472_gpio_map[i].type_to, int3472_gpio_map[i].con_id);
+
+		*type = int3472_gpio_map[i].type_to;
+		*gpio_flags = int3472_gpio_map[i].polarity_low ?
+			      GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH;
+		*con_id = int3472_gpio_map[i].con_id;
+		*enable_time_us = int3472_gpio_map[i].enable_time_us;
+		return;
+	}
+
+	*enable_time_us = GPIO_REGULATOR_ENABLE_TIME;
+
+	switch (*type) {
+	case INT3472_GPIO_TYPE_RESET:
+		*con_id = "reset";
+		*gpio_flags = GPIO_ACTIVE_LOW;
+		break;
+	case INT3472_GPIO_TYPE_POWERDOWN:
+		*con_id = "powerdown";
+		*gpio_flags = GPIO_ACTIVE_LOW;
+		break;
+	case INT3472_GPIO_TYPE_CLK_ENABLE:
+		*con_id = "clk-enable";
+		*gpio_flags = GPIO_ACTIVE_HIGH;
+		break;
+	case INT3472_GPIO_TYPE_PRIVACY_LED:
+		*con_id = "privacy";
+		*gpio_flags = GPIO_ACTIVE_HIGH;
+		break;
+	case INT3472_GPIO_TYPE_STROBE:
+		*con_id = "ir_flood";
+		*gpio_flags = GPIO_ACTIVE_HIGH;
+		break;
+	case INT3472_GPIO_TYPE_HOTPLUG_DETECT:
+		*con_id = "hpd";
+		*gpio_flags = GPIO_ACTIVE_HIGH;
+		break;
+	case INT3472_GPIO_TYPE_POWER_ENABLE:
+		*con_id = "avdd";
+		*gpio_flags = GPIO_ACTIVE_HIGH;
+		break;
+	case INT3472_GPIO_TYPE_DOVDD:
+		*con_id = "dovdd";
+		*gpio_flags = GPIO_ACTIVE_HIGH;
+		break;
+	case INT3472_GPIO_TYPE_HANDSHAKE:
+		*con_id = "dvdd";
+		*gpio_flags = GPIO_ACTIVE_HIGH;
+		/* Setups using a handshake pin need 25 ms enable delay */
+		*enable_time_us = 25 * USEC_PER_MSEC;
+		break;
+	default:
+		*con_id = "unknown";
+		*gpio_flags = GPIO_ACTIVE_HIGH;
+		break;
+	}
+}
+
+/**
+ * skl_int3472_handle_gpio_resources: Map PMIC resources to consuming sensor
+ * @ares: A pointer to a &struct acpi_resource
+ * @data: A pointer to a &struct int3472_discrete_device
+ *
+ * This function handles GPIO resources that are against an INT3472
+ * ACPI device, by checking the value of the corresponding _DSM entry.
+ * This will return a 32bit int, where the lowest byte represents the
+ * function of the GPIO pin:
+ *
+ * 0x00 Reset
+ * 0x01 Power down
+ * 0x02 Strobe
+ * 0x0b Power enable
+ * 0x0c Clock enable
+ * 0x0d Privacy LED
+ * 0x10 DOVDD (digital I/O voltage)
+ * 0x13 Hotplug detect
+ *
+ * There are some known platform specific quirks where that does not quite
+ * hold up; for example where a pin with type 0x01 (Power down) is mapped to
+ * a sensor pin that performs a reset function or entries in _CRS and _DSM that
+ * do not actually correspond to a physical connection. These will be handled
+ * by the mapping sub-functions.
+ *
+ * GPIOs will either be mapped directly to the sensor device or else used
+ * to create clocks and regulators via the usual frameworks.
+ *
+ * Return:
+ * * 1		- Continue the loop without adding a copy of the resource to
+ * *		  the list passed to acpi_dev_get_resources()
+ * * 0		- Continue the loop after adding a copy of the resource to
+ * *		  the list passed to acpi_dev_get_resources()
+ * * -errno	- Error, break loop
+ */
+static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
+					     void *data)
+{
+	struct int3472_discrete_device *int3472 = data;
+	const char *second_sensor = NULL;
+	struct acpi_resource_gpio *agpio;
+	unsigned int enable_time_us;
+	u8 active_value, pin, type;
+	unsigned long gpio_flags;
+	union acpi_object *obj;
+	struct gpio_desc *gpio;
+	const char *err_msg;
+	const char *con_id;
+	int ret;
+
+	if (!acpi_gpio_get_io_resource(ares, &agpio))
+		return 1;
+
+	/*
+	 * ngpios + 2 because the index of this _DSM function is 1-based and
+	 * the first function is just a count.
+	 */
+	obj = acpi_evaluate_dsm_typed(int3472->adev->handle,
+				      &int3472_gpio_guid, 0x00,
+				      int3472->ngpios + 2,
+				      NULL, ACPI_TYPE_INTEGER);
+
+	if (!obj) {
+		dev_warn(int3472->dev, "No _DSM entry for GPIO pin %u\n",
+			 agpio->pin_table[0]);
+		return 1;
+	}
+
+	type = FIELD_GET(INT3472_GPIO_DSM_TYPE, obj->integer.value);
+
+	int3472_get_con_id_and_polarity(int3472, &type, &con_id, &gpio_flags, &enable_time_us);
+
+	pin = FIELD_GET(INT3472_GPIO_DSM_PIN, obj->integer.value);
+	/* Pin field is not really used under Windows and wraps around at 8 bits */
+	if (pin != (agpio->pin_table[0] & 0xff))
+		dev_dbg(int3472->dev, FW_BUG "%s %s pin number mismatch _DSM %d resource %d\n",
+			con_id, agpio->resource_source.string_ptr, pin, agpio->pin_table[0]);
+
+	active_value = FIELD_GET(INT3472_GPIO_DSM_SENSOR_ON_VAL, obj->integer.value);
+	if (!active_value)
+		gpio_flags ^= GPIO_ACTIVE_LOW;
+
+	dev_dbg(int3472->dev, "%s %s pin %d active-%s\n", con_id,
+		agpio->resource_source.string_ptr, agpio->pin_table[0],
+		str_high_low(gpio_flags == GPIO_ACTIVE_HIGH));
+
+	switch (type) {
+	case INT3472_GPIO_TYPE_RESET:
+	case INT3472_GPIO_TYPE_POWERDOWN:
+	case INT3472_GPIO_TYPE_HOTPLUG_DETECT:
+		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, con_id, gpio_flags);
+		if (ret)
+			err_msg = "Failed to map GPIO pin to sensor\n";
+
+		break;
+	case INT3472_GPIO_TYPE_CLK_ENABLE:
+	case INT3472_GPIO_TYPE_PRIVACY_LED:
+	case INT3472_GPIO_TYPE_STROBE:
+	case INT3472_GPIO_TYPE_POWER_ENABLE:
+	case INT3472_GPIO_TYPE_DOVDD:
+	case INT3472_GPIO_TYPE_HANDSHAKE:
+		gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, con_id, gpio_flags);
+		if (IS_ERR(gpio)) {
+			ret = PTR_ERR(gpio);
+			err_msg = "Failed to get GPIO\n";
+			break;
+		}
+
+		switch (type) {
+		case INT3472_GPIO_TYPE_CLK_ENABLE:
+			ret = skl_int3472_register_gpio_clock(int3472, gpio);
+			if (ret)
+				err_msg = "Failed to register clock\n";
+
+			break;
+		case INT3472_GPIO_TYPE_PRIVACY_LED:
+		case INT3472_GPIO_TYPE_STROBE:
+			ret = skl_int3472_register_led(int3472, gpio, con_id);
+			if (ret)
+				err_msg = "Failed to register LED\n";
+
+			break;
+		case INT3472_GPIO_TYPE_POWER_ENABLE:
+			second_sensor = int3472->quirks.avdd_second_sensor;
+			fallthrough;
+		case INT3472_GPIO_TYPE_DOVDD:
+		case INT3472_GPIO_TYPE_HANDSHAKE:
+			ret = skl_int3472_register_regulator(int3472, gpio, enable_time_us,
+							     con_id, second_sensor);
+			if (ret)
+				err_msg = "Failed to register regulator\n";
+
+			break;
+		default: /* Never reached */
+			ret = -EINVAL;
+			break;
+		}
+
+		if (ret)
+			gpiod_put(gpio);
+
+		break;
+	default:
+		dev_warn(int3472->dev,
+			 "GPIO type 0x%02x unknown; the sensor may not work\n",
+			 type);
+		ret = 1;
+		break;
+	}
+
+	int3472->ngpios++;
+	ACPI_FREE(obj);
+
+	if (ret < 0)
+		return dev_err_probe(int3472->dev, ret, err_msg);
+
+	/* Tell acpi_dev_get_resources() to not make a copy of the resource */
+	return 1;
+}
+
+int int3472_discrete_parse_crs(struct int3472_discrete_device *int3472)
+{
+	LIST_HEAD(resource_list);
+	int ret;
+
+	skl_int3472_log_sensor_module_name(int3472);
+
+	ret = acpi_dev_get_resources(int3472->adev, &resource_list,
+				     skl_int3472_handle_gpio_resources,
+				     int3472);
+	if (ret < 0)
+		return ret;
+
+	acpi_dev_free_resource_list(&resource_list);
+
+	/* Register _DSM based clock (no-op if a GPIO clock was already registered) */
+	ret = skl_int3472_register_dsm_clock(int3472);
+	if (ret < 0)
+		return ret;
+
+	int3472->gpios.dev_id = int3472->sensor_name;
+	gpiod_add_lookup_table(&int3472->gpios);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(int3472_discrete_parse_crs, "INTEL_INT3472_DISCRETE");
+
+void int3472_discrete_cleanup(struct int3472_discrete_device *int3472)
+{
+	gpiod_remove_lookup_table(&int3472->gpios);
+
+	skl_int3472_unregister_clock(int3472);
+	skl_int3472_unregister_leds(int3472);
+	skl_int3472_unregister_regulator(int3472);
+}
+EXPORT_SYMBOL_NS_GPL(int3472_discrete_cleanup, "INTEL_INT3472_DISCRETE");
+
+static void skl_int3472_discrete_remove(struct platform_device *pdev)
+{
+	int3472_discrete_cleanup(platform_get_drvdata(pdev));
+}
+
+static int skl_int3472_discrete_probe(struct platform_device *pdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	const struct int3472_discrete_quirks *quirks = NULL;
+	struct int3472_discrete_device *int3472;
+	const struct dmi_system_id *id;
+	struct int3472_cldb cldb;
+	int ret;
+
+	if (!adev)
+		return -ENODEV;
+
+	id = dmi_first_match(skl_int3472_discrete_quirks);
+	if (id)
+		quirks = id->driver_data;
+
+	ret = skl_int3472_fill_cldb(adev, &cldb);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't fill CLDB structure\n");
+		return ret;
+	}
+
+	if (cldb.control_logic_type != 1) {
+		dev_err(&pdev->dev, "Unsupported control logic type %u\n",
+			cldb.control_logic_type);
+		return -EINVAL;
+	}
+
+	/* Max num GPIOs we've seen plus a terminator */
+	int3472 = devm_kzalloc(&pdev->dev, struct_size(int3472, gpios.table,
+			       INT3472_MAX_SENSOR_GPIOS + 1), GFP_KERNEL);
+	if (!int3472)
+		return -ENOMEM;
+
+	int3472->adev = adev;
+	int3472->dev = &pdev->dev;
+	platform_set_drvdata(pdev, int3472);
+	int3472->clock.imgclk_index = cldb.clock_source;
+
+	if (quirks)
+		int3472->quirks = *quirks;
+
+	ret = skl_int3472_get_sensor_adev_and_name(&pdev->dev, &int3472->sensor,
+						   &int3472->sensor_name);
+	if (ret)
+		return ret;
+
+	/*
+	 * Initialising this list means we can call gpiod_remove_lookup_table()
+	 * in failure paths without issue.
+	 */
+	INIT_LIST_HEAD(&int3472->gpios.list);
+
+	ret = int3472_discrete_parse_crs(int3472);
+	if (ret) {
+		skl_int3472_discrete_remove(pdev);
+		return ret;
+	}
+
+	acpi_dev_clear_dependencies(adev);
+	return 0;
+}
+
+static const struct acpi_device_id int3472_device_id[] = {
+	{ "INT3472", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, int3472_device_id);
+
+static struct platform_driver int3472_discrete = {
+	.driver = {
+		.name = "int3472-discrete",
+		.acpi_match_table = int3472_device_id,
+	},
+	.probe = skl_int3472_discrete_probe,
+	.remove = skl_int3472_discrete_remove,
+};
+module_platform_driver(int3472_discrete);
+
+MODULE_DESCRIPTION("Intel SkyLake INT3472 ACPI Discrete Device Driver");
+MODULE_AUTHOR("Daniel Scally <djrscally@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS("INTEL_INT3472");

linux-7.2.3/drivers/platform/x86/intel/int3472/discrete_quirks.c

@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Author: Hans de Goede <hansg@kernel.org> */
+
+#include <linux/dmi.h>
+#include <linux/platform_data/x86/int3472.h>
+
+static const struct int3472_discrete_quirks lenovo_miix_510_quirks = {
+	.avdd_second_sensor = "i2c-OVTI2680:00",
+};
+
+const struct dmi_system_id skl_int3472_discrete_quirks[] = {
+	{
+		/* Lenovo Miix 510-12IKB */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "MIIX 510-12IKB"),
+		},
+		.driver_data = (void *)&lenovo_miix_510_quirks,
+	},
+	{ }
+};

linux-7.2.3/drivers/platform/x86/intel/int3472/led.c

@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Author: Hans de Goede <hdegoede@redhat.com> */
+
+#include <linux/acpi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/leds.h>
+#include <linux/platform_data/x86/int3472.h>
+
+static int int3472_led_set(struct led_classdev *led_cdev, enum led_brightness brightness)
+{
+	struct int3472_led *led = container_of(led_cdev, struct int3472_led, classdev);
+
+	gpiod_set_value_cansleep(led->gpio, brightness);
+	return 0;
+}
+
+int skl_int3472_register_led(struct int3472_discrete_device *int3472, struct gpio_desc *gpio,
+			     const char *con_id)
+{
+	struct int3472_led *led;
+	char *p;
+	int ret;
+
+	if (int3472->n_leds >= INT3472_MAX_LEDS)
+		return -ENOSPC;
+
+	led = &int3472->leds[int3472->n_leds];
+	led->gpio = gpio;
+
+	/* Generate the name, replacing the ':' in the ACPI devname with '_' */
+	snprintf(led->name, sizeof(led->name),
+		 "%s::%s_led", acpi_dev_name(int3472->sensor), con_id);
+	p = strchr(led->name, ':');
+	if (p)
+		*p = '_';
+
+	led->classdev.name = led->name;
+	led->classdev.max_brightness = 1;
+	led->classdev.brightness_set_blocking = int3472_led_set;
+
+	ret = led_classdev_register(int3472->dev, &led->classdev);
+	if (ret)
+		return ret;
+
+	led->lookup.provider = led->name;
+	led->lookup.dev_id = int3472->sensor_name;
+	led->lookup.con_id = con_id;
+	led_add_lookup(&led->lookup);
+
+	int3472->n_leds++;
+	return 0;
+}
+
+void skl_int3472_unregister_leds(struct int3472_discrete_device *int3472)
+{
+	for (unsigned int i = 0; i < int3472->n_leds; i++) {
+		struct int3472_led *led = &int3472->leds[i];
+
+		led_remove_lookup(&led->lookup);
+		led_classdev_unregister(&led->classdev);
+		gpiod_put(led->gpio);
+	}
+}

linux-7.2.3/drivers/platform/x86/intel/int3472/tps68470.c

@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Author: Dan Scally <djrscally@gmail.com> */
+
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps68470.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/tps68470.h>
+#include <linux/platform_data/x86/int3472.h>
+#include <linux/regmap.h>
+#include <linux/string.h>
+
+#include "tps68470.h"
+
+#define DESIGNED_FOR_CHROMEOS		1
+#define DESIGNED_FOR_WINDOWS		2
+
+#define TPS68470_WIN_MFD_CELL_COUNT	3
+
+static const struct mfd_cell tps68470_cros[] = {
+	{ .name = "tps68470-gpio" },
+	{ .name = "tps68470_pmic_opregion" },
+};
+
+static const struct regmap_config tps68470_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = TPS68470_REG_MAX,
+};
+
+static int tps68470_chip_init(struct device *dev, struct regmap *regmap)
+{
+	unsigned int version;
+	int ret;
+
+	/* Force software reset */
+	ret = regmap_write(regmap, TPS68470_REG_RESET, TPS68470_REG_RESET_MASK);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(regmap, TPS68470_REG_REVID, &version);
+	if (ret) {
+		dev_err(dev, "Failed to read revision register: %d\n", ret);
+		return ret;
+	}
+
+	dev_info(dev, "TPS68470 REVID: 0x%02x\n", version);
+
+	return 0;
+}
+
+/** skl_int3472_tps68470_calc_type: Check what platform a device is designed for
+ * @adev: A pointer to a &struct acpi_device
+ *
+ * Check CLDB buffer against the PMIC's adev. If present, then we check
+ * the value of control_logic_type field and follow one of the
+ * following scenarios:
+ *
+ *	1. No CLDB - likely ACPI tables designed for ChromeOS. We
+ *	create platform devices for the GPIOs and OpRegion drivers.
+ *
+ *	2. CLDB, with control_logic_type = 2 - probably ACPI tables
+ *	made for Windows 2-in-1 platforms. Register pdevs for GPIO,
+ *	Clock and Regulator drivers to bind to.
+ *
+ *	3. Any other value in control_logic_type, we should never have
+ *	gotten to this point; fail probe and return.
+ *
+ * Return:
+ * * 1		Device intended for ChromeOS
+ * * 2		Device intended for Windows
+ * * -EINVAL	Where @adev has an object named CLDB but it does not conform to
+ *		our expectations
+ */
+static int skl_int3472_tps68470_calc_type(struct acpi_device *adev)
+{
+	struct int3472_cldb cldb = { 0 };
+	int ret;
+
+	/*
+	 * A CLDB buffer that exists, but which does not match our expectations
+	 * should trigger an error so we don't blindly continue.
+	 */
+	ret = skl_int3472_fill_cldb(adev, &cldb);
+	if (ret && ret != -ENODEV)
+		return ret;
+
+	if (ret)
+		return DESIGNED_FOR_CHROMEOS;
+
+	if (cldb.control_logic_type != 2)
+		return -EINVAL;
+
+	return DESIGNED_FOR_WINDOWS;
+}
+
+/*
+ * Return the size of the flexible array member, because we'll need that later
+ * on to pass .pdata_size to cells.
+ */
+static int
+skl_int3472_fill_clk_pdata(struct device *dev, struct tps68470_clk_platform_data **clk_pdata)
+{
+	struct acpi_device *adev = ACPI_COMPANION(dev);
+	struct acpi_device *consumer;
+	unsigned int n_consumers = 0;
+	const char *sensor_name;
+	unsigned int i = 0;
+
+	for_each_acpi_consumer_dev(adev, consumer)
+		n_consumers++;
+
+	if (!n_consumers) {
+		dev_err(dev, "INT3472 seems to have no dependents\n");
+		return -ENODEV;
+	}
+
+	*clk_pdata = devm_kzalloc(dev, struct_size(*clk_pdata, consumers, n_consumers),
+				  GFP_KERNEL);
+	if (!*clk_pdata)
+		return -ENOMEM;
+
+	(*clk_pdata)->n_consumers = n_consumers;
+	i = 0;
+
+	for_each_acpi_consumer_dev(adev, consumer) {
+		sensor_name = devm_kasprintf(dev, GFP_KERNEL, I2C_DEV_NAME_FORMAT,
+					     acpi_dev_name(consumer));
+		if (!sensor_name) {
+			acpi_dev_put(consumer);
+			return -ENOMEM;
+		}
+
+		(*clk_pdata)->consumers[i].consumer_dev_name = sensor_name;
+		i++;
+	}
+
+	return n_consumers;
+}
+
+static int skl_int3472_tps68470_probe(struct i2c_client *client)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&client->dev);
+	const struct int3472_tps68470_board_data *board_data;
+	struct tps68470_clk_platform_data *clk_pdata;
+	struct mfd_cell *cells;
+	struct regmap *regmap;
+	int n_consumers;
+	int device_type;
+	int ret;
+	int i;
+
+	if (!adev)
+		return -ENODEV;
+
+	n_consumers = skl_int3472_fill_clk_pdata(&client->dev, &clk_pdata);
+	if (n_consumers < 0)
+		return n_consumers;
+
+	regmap = devm_regmap_init_i2c(client, &tps68470_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to create regmap: %ld\n", PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	i2c_set_clientdata(client, regmap);
+
+	ret = tps68470_chip_init(&client->dev, regmap);
+	if (ret < 0) {
+		dev_err(&client->dev, "TPS68470 init error %d\n", ret);
+		return ret;
+	}
+
+	device_type = skl_int3472_tps68470_calc_type(adev);
+	switch (device_type) {
+	case DESIGNED_FOR_WINDOWS:
+		board_data = int3472_tps68470_get_board_data(dev_name(&client->dev));
+		if (!board_data)
+			return dev_err_probe(&client->dev, -ENODEV, "No board-data found for this model\n");
+
+		cells = kzalloc_objs(*cells, TPS68470_WIN_MFD_CELL_COUNT);
+		if (!cells)
+			return -ENOMEM;
+
+		/*
+		 * The order of the cells matters here! The clk must be first
+		 * because the regulator depends on it. The gpios must be last,
+		 * acpi_gpiochip_add() calls acpi_dev_clear_dependencies() and
+		 * the clk + regulators must be ready when this happens.
+		 */
+		cells[0].name = "tps68470-clk";
+		cells[0].platform_data = clk_pdata;
+		cells[0].pdata_size = struct_size(clk_pdata, consumers, n_consumers);
+		cells[1].name = "tps68470-regulator";
+		cells[1].platform_data = (void *)board_data->tps68470_regulator_pdata;
+		cells[1].pdata_size = sizeof(struct tps68470_regulator_platform_data);
+		cells[2].name = "tps68470-gpio";
+		cells[2].swnode = board_data->tps68470_gpio_swnode;
+
+		for (i = 0; i < board_data->n_gpiod_lookups; i++)
+			gpiod_add_lookup_table(board_data->tps68470_gpio_lookup_tables[i]);
+
+		ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+					   cells, TPS68470_WIN_MFD_CELL_COUNT,
+					   NULL, 0, NULL);
+		kfree(cells);
+
+		if (ret) {
+			for (i = 0; i < board_data->n_gpiod_lookups; i++)
+				gpiod_remove_lookup_table(board_data->tps68470_gpio_lookup_tables[i]);
+		}
+
+		break;
+	case DESIGNED_FOR_CHROMEOS:
+		ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+					   tps68470_cros, ARRAY_SIZE(tps68470_cros),
+					   NULL, 0, NULL);
+		break;
+	default:
+		dev_err(&client->dev, "Failed to add MFD devices\n");
+		return device_type;
+	}
+
+	/*
+	 * No acpi_dev_clear_dependencies() here, since the acpi_gpiochip_add()
+	 * for the GPIO cell already does this.
+	 */
+
+	return ret;
+}
+
+static void skl_int3472_tps68470_remove(struct i2c_client *client)
+{
+	const struct int3472_tps68470_board_data *board_data;
+	int i;
+
+	board_data = int3472_tps68470_get_board_data(dev_name(&client->dev));
+	if (board_data) {
+		for (i = 0; i < board_data->n_gpiod_lookups; i++)
+			gpiod_remove_lookup_table(board_data->tps68470_gpio_lookup_tables[i]);
+	}
+}
+
+static const struct acpi_device_id int3472_device_id[] = {
+	{ "INT3472", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, int3472_device_id);
+
+static struct i2c_driver int3472_tps68470 = {
+	.driver = {
+		.name = "int3472-tps68470",
+		.acpi_match_table = int3472_device_id,
+	},
+	.probe = skl_int3472_tps68470_probe,
+	.remove = skl_int3472_tps68470_remove,
+};
+module_i2c_driver(int3472_tps68470);
+
+MODULE_DESCRIPTION("Intel SkyLake INT3472 ACPI TPS68470 Device Driver");
+MODULE_AUTHOR("Daniel Scally <djrscally@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS("INTEL_INT3472");
+MODULE_SOFTDEP("pre: clk-tps68470 tps68470-regulator");

linux-7.2.3/drivers/platform/x86/intel/int3472/tps68470.h

@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * TI TPS68470 PMIC platform data definition.
+ *
+ * Copyright (c) 2021 Red Hat Inc.
+ *
+ * Red Hat authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#ifndef _INTEL_SKL_INT3472_TPS68470_H
+#define _INTEL_SKL_INT3472_TPS68470_H
+
+struct gpiod_lookup_table;
+struct tps68470_regulator_platform_data;
+
+struct int3472_tps68470_board_data {
+	const char *dev_name;
+	const struct tps68470_regulator_platform_data *tps68470_regulator_pdata;
+	const struct software_node *tps68470_gpio_swnode;
+	unsigned int n_gpiod_lookups;
+	struct gpiod_lookup_table *tps68470_gpio_lookup_tables[];
+};
+
+const struct int3472_tps68470_board_data *int3472_tps68470_get_board_data(const char *dev_name);
+
+#endif

linux-7.2.3/drivers/platform/x86/intel/int3472/tps68470_board_data.c

@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI TPS68470 PMIC platform data definition.
+ *
+ * Copyright (c) 2021 Dan Scally <djrscally@gmail.com>
+ * Copyright (c) 2021 Red Hat Inc.
+ *
+ * Red Hat authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/dmi.h>
+#include <linux/gpio/machine.h>
+#include <linux/platform_data/tps68470.h>
+#include <linux/property.h>
+#include <linux/regulator/machine.h>
+#include "tps68470.h"
+
+static struct regulator_consumer_supply int347a_core_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dvdd", "i2c-INT347A:00"),
+};
+
+static struct regulator_consumer_supply int347a_ana_consumer_supplies[] = {
+	REGULATOR_SUPPLY("avdd", "i2c-INT347A:00"),
+};
+
+static struct regulator_consumer_supply int347a_vcm_consumer_supplies[] = {
+	REGULATOR_SUPPLY("vdd", "i2c-INT347A:00-VCM"),
+};
+
+static struct regulator_consumer_supply int347a_vsio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dovdd", "i2c-INT347A:00"),
+	REGULATOR_SUPPLY("vsio", "i2c-INT347A:00-VCM"),
+	REGULATOR_SUPPLY("vddd", "i2c-INT347E:00"),
+};
+
+static struct regulator_consumer_supply int347a_aux1_consumer_supplies[] = {
+	REGULATOR_SUPPLY("vdda", "i2c-INT347E:00"),
+};
+
+static struct regulator_consumer_supply int347a_aux2_consumer_supplies[] = {
+	REGULATOR_SUPPLY("vdddo", "i2c-INT347E:00"),
+};
+
+static const struct regulator_init_data surface_go_tps68470_core_reg_init_data = {
+	.constraints = {
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = true,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_core_consumer_supplies),
+	.consumer_supplies = int347a_core_consumer_supplies,
+};
+
+static const struct regulator_init_data surface_go_tps68470_ana_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = true,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_ana_consumer_supplies),
+	.consumer_supplies = int347a_ana_consumer_supplies,
+};
+
+static const struct regulator_init_data surface_go_tps68470_vcm_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = true,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_vcm_consumer_supplies),
+	.consumer_supplies = int347a_vcm_consumer_supplies,
+};
+
+/* Ensure the always-on VIO regulator has the same voltage as VSIO */
+static const struct regulator_init_data surface_go_tps68470_vio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = true,
+		.always_on = true,
+	},
+};
+
+static const struct regulator_init_data surface_go_tps68470_vsio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = true,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_vsio_consumer_supplies),
+	.consumer_supplies = int347a_vsio_consumer_supplies,
+};
+
+static const struct regulator_init_data surface_go_tps68470_aux1_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_aux1_consumer_supplies),
+	.consumer_supplies = int347a_aux1_consumer_supplies,
+};
+
+static const struct regulator_init_data surface_go_tps68470_aux2_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int347a_aux2_consumer_supplies),
+	.consumer_supplies = int347a_aux2_consumer_supplies,
+};
+
+static const struct tps68470_regulator_platform_data surface_go_tps68470_pdata = {
+	.reg_init_data = {
+		[TPS68470_CORE] = &surface_go_tps68470_core_reg_init_data,
+		[TPS68470_ANA]  = &surface_go_tps68470_ana_reg_init_data,
+		[TPS68470_VCM]  = &surface_go_tps68470_vcm_reg_init_data,
+		[TPS68470_VIO] = &surface_go_tps68470_vio_reg_init_data,
+		[TPS68470_VSIO] = &surface_go_tps68470_vsio_reg_init_data,
+		[TPS68470_AUX1] = &surface_go_tps68470_aux1_reg_init_data,
+		[TPS68470_AUX2] = &surface_go_tps68470_aux2_reg_init_data,
+	},
+};
+
+/* Settings for Dell 7212 Tablet */
+
+static struct regulator_consumer_supply int3479_vsio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("avdd", "i2c-INT3479:00"),
+};
+
+static struct regulator_consumer_supply int3479_aux1_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dvdd", "i2c-INT3479:00"),
+};
+
+static struct regulator_consumer_supply int3479_aux2_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dovdd", "i2c-INT3479:00"),
+};
+
+static const struct regulator_init_data dell_7212_tps68470_core_reg_init_data = {
+	.constraints = {
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static const struct regulator_init_data dell_7212_tps68470_ana_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static const struct regulator_init_data dell_7212_tps68470_vcm_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static const struct regulator_init_data dell_7212_tps68470_vio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static const struct regulator_init_data dell_7212_tps68470_vsio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3479_vsio_consumer_supplies),
+	.consumer_supplies = int3479_vsio_consumer_supplies,
+};
+
+static const struct regulator_init_data dell_7212_tps68470_aux1_reg_init_data = {
+	.constraints = {
+		.min_uV = 1213200,
+		.max_uV = 1213200,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3479_aux1_consumer_supplies),
+	.consumer_supplies = int3479_aux1_consumer_supplies,
+};
+
+static const struct regulator_init_data dell_7212_tps68470_aux2_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(int3479_aux2_consumer_supplies),
+	.consumer_supplies = int3479_aux2_consumer_supplies,
+};
+
+static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata = {
+	.reg_init_data = {
+		[TPS68470_CORE] = &dell_7212_tps68470_core_reg_init_data,
+		[TPS68470_ANA]  = &dell_7212_tps68470_ana_reg_init_data,
+		[TPS68470_VCM]  = &dell_7212_tps68470_vcm_reg_init_data,
+		[TPS68470_VIO]  = &dell_7212_tps68470_vio_reg_init_data,
+		[TPS68470_VSIO] = &dell_7212_tps68470_vsio_reg_init_data,
+		[TPS68470_AUX1] = &dell_7212_tps68470_aux1_reg_init_data,
+		[TPS68470_AUX2] = &dell_7212_tps68470_aux2_reg_init_data,
+	},
+};
+
+/* Settings for MSI Prestige 14 AI+ Evo C2VMG laptop. */
+static struct regulator_consumer_supply ovti5675_avdd_consumer_supplies[] = {
+	REGULATOR_SUPPLY("avdd", "i2c-OVTI5675:00"),
+};
+
+static struct regulator_consumer_supply ovti5675_dovdd_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dovdd", "i2c-OVTI5675:00"),
+};
+
+static struct regulator_consumer_supply ovti5675_dvdd_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dvdd", "i2c-OVTI5675:00"),
+};
+
+static const struct regulator_init_data msi_prestige_ai_evo_tps68470_core_reg_init_data = {
+	.constraints = {
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ovti5675_dvdd_consumer_supplies),
+	.consumer_supplies = ovti5675_dvdd_consumer_supplies,
+};
+
+static const struct regulator_init_data msi_prestige_ai_evo_tps68470_ana_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ovti5675_avdd_consumer_supplies),
+	.consumer_supplies = ovti5675_avdd_consumer_supplies,
+};
+
+static const struct regulator_init_data msi_prestige_ai_evo_tps68470_vio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static const struct regulator_init_data msi_prestige_ai_evo_tps68470_vsio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ovti5675_dovdd_consumer_supplies),
+	.consumer_supplies = ovti5675_dovdd_consumer_supplies,
+};
+
+static const struct tps68470_regulator_platform_data msi_prestige_ai_evo_tps68470_pdata = {
+	.reg_init_data = {
+		[TPS68470_CORE] = &msi_prestige_ai_evo_tps68470_core_reg_init_data,
+		[TPS68470_ANA]  = &msi_prestige_ai_evo_tps68470_ana_reg_init_data,
+		[TPS68470_VIO]  = &msi_prestige_ai_evo_tps68470_vio_reg_init_data,
+		[TPS68470_VSIO] = &msi_prestige_ai_evo_tps68470_vsio_reg_init_data,
+	},
+};
+
+/* Settings for Intel NVL platform */
+
+static struct regulator_consumer_supply ovti13b1_core_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dvdd", "i2c-OVTI13B1:01"),
+};
+
+static struct regulator_consumer_supply ovti13b1_ana_consumer_supplies[] = {
+	REGULATOR_SUPPLY("avdd", "i2c-OVTI13B1:01"),
+};
+
+static struct regulator_consumer_supply ovti13b1_vcm_consumer_supplies[] = {
+	REGULATOR_SUPPLY("vcc", "i2c-OVTI13B1:01-VCM"),
+};
+
+static struct regulator_consumer_supply ovti13b1_vsio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("dovdd", "i2c-OVTI13B1:01"),
+};
+
+static const struct regulator_init_data intel_nvl_tps68470_core_reg_init_data = {
+		.constraints = {
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = true,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ovti13b1_core_consumer_supplies),
+	.consumer_supplies = ovti13b1_core_consumer_supplies,
+};
+
+static const struct regulator_init_data intel_nvl_tps68470_ana_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = true,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ovti13b1_ana_consumer_supplies),
+	.consumer_supplies = ovti13b1_ana_consumer_supplies,
+};
+static const struct regulator_init_data intel_nvl_tps68470_vcm_reg_init_data = {
+	.constraints = {
+		.min_uV = 2815200,
+		.max_uV = 2815200,
+		.apply_uV = true,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ovti13b1_vcm_consumer_supplies),
+	.consumer_supplies = ovti13b1_vcm_consumer_supplies,
+};
+
+/* Ensure the always-on VIO regulator has the same voltage as VSIO */
+static const struct regulator_init_data intel_nvl_tps68470_vio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = true,
+		.always_on = true,
+	},
+};
+static const struct regulator_init_data intel_nvl_tps68470_vsio_reg_init_data = {
+	.constraints = {
+		.min_uV = 1800600,
+		.max_uV = 1800600,
+		.apply_uV = true,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ovti13b1_vsio_consumer_supplies),
+	.consumer_supplies = ovti13b1_vsio_consumer_supplies,
+};
+
+static const struct tps68470_regulator_platform_data intel_nvl_tps68470_pdata = {
+	.reg_init_data = {
+		[TPS68470_CORE] = &intel_nvl_tps68470_core_reg_init_data,
+		[TPS68470_ANA]  = &intel_nvl_tps68470_ana_reg_init_data,
+		[TPS68470_VCM]  = &intel_nvl_tps68470_vcm_reg_init_data,
+		[TPS68470_VIO] = &intel_nvl_tps68470_vio_reg_init_data,
+		[TPS68470_VSIO] = &intel_nvl_tps68470_vsio_reg_init_data,
+	},
+};
+
+static struct gpiod_lookup_table surface_go_int347a_gpios = {
+	.dev_id = "i2c-INT347A:00",
+	.table = {
+		GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("tps68470-gpio", 7, "powerdown", GPIO_ACTIVE_LOW),
+		{ }
+	}
+};
+
+static struct gpiod_lookup_table surface_go_int347e_gpios = {
+	.dev_id = "i2c-INT347E:00",
+	.table = {
+		GPIO_LOOKUP("tps68470-gpio", 5, "enable", GPIO_ACTIVE_HIGH),
+		{ }
+	}
+};
+
+static struct gpiod_lookup_table dell_7212_int3479_gpios = {
+	.dev_id = "i2c-INT3479:00",
+	.table = {
+		GPIO_LOOKUP("tps68470-gpio", 3, "reset", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("tps68470-gpio", 4, "powerdown", GPIO_ACTIVE_LOW),
+		{ }
+	}
+};
+
+static struct gpiod_lookup_table msi_prestige_ai_evo_ovti5675_gpios = {
+	.dev_id = "i2c-OVTI5675:00",
+	.table = {
+		GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW),
+		{ }
+	}
+};
+
+static struct gpiod_lookup_table intel_nvl_tps68470_gpios = {
+	.dev_id = "i2c-OVTI13B1:01",
+	.table = {
+		GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW),
+		{ }
+	}
+};
+
+static const struct property_entry int3472_tps68470_daisy_chain_gpio_props[] = {
+	PROPERTY_ENTRY_BOOL("daisy-chain-enable"),
+	{ }
+};
+
+static const struct software_node int3472_tps68470_daisy_chain_gpio_swnode = {
+	.properties = int3472_tps68470_daisy_chain_gpio_props,
+};
+
+static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = {
+	.dev_name = "i2c-INT3472:05",
+	.tps68470_regulator_pdata = &surface_go_tps68470_pdata,
+	.n_gpiod_lookups = 2,
+	.tps68470_gpio_lookup_tables = {
+		&surface_go_int347a_gpios,
+		&surface_go_int347e_gpios,
+	},
+};
+
+static const struct int3472_tps68470_board_data surface_go3_tps68470_board_data = {
+	.dev_name = "i2c-INT3472:01",
+	.tps68470_regulator_pdata = &surface_go_tps68470_pdata,
+	.n_gpiod_lookups = 2,
+	.tps68470_gpio_lookup_tables = {
+		&surface_go_int347a_gpios,
+		&surface_go_int347e_gpios,
+	},
+};
+
+static const struct int3472_tps68470_board_data dell_7212_tps68470_board_data = {
+	.dev_name = "i2c-INT3472:05",
+	.tps68470_regulator_pdata = &dell_7212_tps68470_pdata,
+	.n_gpiod_lookups = 1,
+	.tps68470_gpio_lookup_tables = {
+		&dell_7212_int3479_gpios,
+	},
+};
+
+static const struct int3472_tps68470_board_data msi_prestige_ai_evo_tps68470_board_data = {
+	.dev_name = "i2c-INT3472:06",
+	.tps68470_regulator_pdata = &msi_prestige_ai_evo_tps68470_pdata,
+	.tps68470_gpio_swnode = &int3472_tps68470_daisy_chain_gpio_swnode,
+	.n_gpiod_lookups = 1,
+	.tps68470_gpio_lookup_tables = {
+		&msi_prestige_ai_evo_ovti5675_gpios,
+	},
+};
+
+static const struct int3472_tps68470_board_data intel_nvl_tps68470_board_data = {
+	.dev_name = "i2c-INT3472:04",
+	.tps68470_regulator_pdata = &intel_nvl_tps68470_pdata,
+	.tps68470_gpio_swnode = &int3472_tps68470_daisy_chain_gpio_swnode,
+	.n_gpiod_lookups = 1,
+	.tps68470_gpio_lookup_tables = {
+		&intel_nvl_tps68470_gpios,
+	},
+};
+
+static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go"),
+		},
+		.driver_data = (void *)&surface_go_tps68470_board_data,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go 2"),
+		},
+		.driver_data = (void *)&surface_go_tps68470_board_data,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"),
+		},
+		.driver_data = (void *)&surface_go3_tps68470_board_data,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude 7212 Rugged Extreme Tablet"),
+		},
+		.driver_data = (void *)&dell_7212_tps68470_board_data,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Prestige 13 AI+ Evo A2VMG"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "MS-13Q3"),
+		},
+		.driver_data = (void *)&msi_prestige_ai_evo_tps68470_board_data,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Prestige 14 AI+ Evo C2VMG"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "MS-14N3"),
+		},
+		.driver_data = (void *)&msi_prestige_ai_evo_tps68470_board_data,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Prestige 16 AI+ Evo B2VMG"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "MS-15A3"),
+		},
+		.driver_data = (void *)&msi_prestige_ai_evo_tps68470_board_data,
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Nova Lake Client Platform"),
+		},
+		.driver_data = (void *)&intel_nvl_tps68470_board_data,
+	},
+	{ }
+};
+
+const struct int3472_tps68470_board_data *int3472_tps68470_get_board_data(const char *dev_name)
+{
+	const struct int3472_tps68470_board_data *board_data;
+	const struct dmi_system_id *match;
+
+	for (match = dmi_first_match(int3472_tps68470_board_data_table);
+	     match;
+	     match = dmi_first_match(match + 1)) {
+		board_data = match->driver_data;
+		if (strcmp(board_data->dev_name, dev_name) == 0)
+			return board_data;
+	}
+
+	return NULL;
+}