Resguardo inicial

linux-7.2.3/drivers/rapidio/switches/Kconfig

@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# RapidIO switches configuration
+#
+config RAPIDIO_CPS_XX
+	tristate "IDT CPS-xx SRIO switches support"
+	help
+	  Includes support for IDT CPS-16/12/10/8 serial RapidIO switches.
+
+config RAPIDIO_CPS_GEN2
+	tristate "IDT CPS Gen.2 SRIO switch support"
+	default n
+	help
+	  Includes support for ITD CPS Gen.2 serial RapidIO switches.
+
+config RAPIDIO_RXS_GEN3
+	tristate "IDT RXS Gen.3 SRIO switch support"
+	default n
+	help
+	  Includes support for ITD RXS Gen.3 serial RapidIO switches.

linux-7.2.3/drivers/rapidio/switches/Makefile

@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for RIO switches
+#
+
+obj-$(CONFIG_RAPIDIO_CPS_XX)	+= idtcps.o
+obj-$(CONFIG_RAPIDIO_CPS_GEN2)	+= idt_gen2.o
+obj-$(CONFIG_RAPIDIO_RXS_GEN3)	+= idt_gen3.o

linux-7.2.3/drivers/rapidio/switches/idt_gen2.c

@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * IDT CPS Gen.2 Serial RapidIO switch family support
+ *
+ * Copyright 2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ */
+
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+
+#include <asm/page.h>
+#include "../rio.h"
+
+#define LOCAL_RTE_CONF_DESTID_SEL	0x010070
+#define LOCAL_RTE_CONF_DESTID_SEL_PSEL	0x0000001f
+
+#define IDT_LT_ERR_REPORT_EN	0x03100c
+
+#define IDT_PORT_ERR_REPORT_EN(n)	(0x031044 + (n)*0x40)
+#define IDT_PORT_ERR_REPORT_EN_BC	0x03ff04
+
+#define IDT_PORT_ISERR_REPORT_EN(n)	(0x03104C + (n)*0x40)
+#define IDT_PORT_ISERR_REPORT_EN_BC	0x03ff0c
+#define IDT_PORT_INIT_TX_ACQUIRED	0x00000020
+
+#define IDT_LANE_ERR_REPORT_EN(n)	(0x038010 + (n)*0x100)
+#define IDT_LANE_ERR_REPORT_EN_BC	0x03ff10
+
+#define IDT_DEV_CTRL_1		0xf2000c
+#define IDT_DEV_CTRL_1_GENPW		0x02000000
+#define IDT_DEV_CTRL_1_PRSTBEH		0x00000001
+
+#define IDT_CFGBLK_ERR_CAPTURE_EN	0x020008
+#define IDT_CFGBLK_ERR_REPORT		0xf20014
+#define IDT_CFGBLK_ERR_REPORT_GENPW		0x00000002
+
+#define IDT_AUX_PORT_ERR_CAP_EN	0x020000
+#define IDT_AUX_ERR_REPORT_EN	0xf20018
+#define IDT_AUX_PORT_ERR_LOG_I2C	0x00000002
+#define IDT_AUX_PORT_ERR_LOG_JTAG	0x00000001
+
+#define	IDT_ISLTL_ADDRESS_CAP	0x021014
+
+#define IDT_RIO_DOMAIN		0xf20020
+#define IDT_RIO_DOMAIN_MASK		0x000000ff
+
+#define IDT_PW_INFO_CSR		0xf20024
+
+#define IDT_SOFT_RESET		0xf20040
+#define IDT_SOFT_RESET_REQ		0x00030097
+
+#define IDT_I2C_MCTRL		0xf20050
+#define IDT_I2C_MCTRL_GENPW		0x04000000
+
+#define IDT_JTAG_CTRL		0xf2005c
+#define IDT_JTAG_CTRL_GENPW		0x00000002
+
+#define IDT_LANE_CTRL(n)	(0xff8000 + (n)*0x100)
+#define IDT_LANE_CTRL_BC	0xffff00
+#define IDT_LANE_CTRL_GENPW		0x00200000
+#define IDT_LANE_DFE_1_BC	0xffff18
+#define IDT_LANE_DFE_2_BC	0xffff1c
+
+#define IDT_PORT_OPS(n)		(0xf40004 + (n)*0x100)
+#define IDT_PORT_OPS_GENPW		0x08000000
+#define IDT_PORT_OPS_PL_ELOG		0x00000040
+#define IDT_PORT_OPS_LL_ELOG		0x00000020
+#define IDT_PORT_OPS_LT_ELOG		0x00000010
+#define IDT_PORT_OPS_BC		0xf4ff04
+
+#define IDT_PORT_ISERR_DET(n)	(0xf40008 + (n)*0x100)
+
+#define IDT_ERR_CAP		0xfd0000
+#define IDT_ERR_CAP_LOG_OVERWR		0x00000004
+
+#define IDT_ERR_RD		0xfd0004
+
+#define IDT_DEFAULT_ROUTE	0xde
+#define IDT_NO_ROUTE		0xdf
+
+static int
+idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 route_port)
+{
+	/*
+	 * Select routing table to update
+	 */
+	if (table == RIO_GLOBAL_TABLE)
+		table = 0;
+	else
+		table++;
+
+	if (route_port == RIO_INVALID_ROUTE)
+		route_port = IDT_DEFAULT_ROUTE;
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  LOCAL_RTE_CONF_DESTID_SEL, table);
+
+	/*
+	 * Program destination port for the specified destID
+	 */
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+				  (u32)route_destid);
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  RIO_STD_RTE_CONF_PORT_SEL_CSR,
+				  (u32)route_port);
+	udelay(10);
+
+	return 0;
+}
+
+static int
+idtg2_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 *route_port)
+{
+	u32 result;
+
+	/*
+	 * Select routing table to read
+	 */
+	if (table == RIO_GLOBAL_TABLE)
+		table = 0;
+	else
+		table++;
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  LOCAL_RTE_CONF_DESTID_SEL, table);
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+				  route_destid);
+
+	rio_mport_read_config_32(mport, destid, hopcount,
+				 RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+	if (IDT_DEFAULT_ROUTE == (u8)result || IDT_NO_ROUTE == (u8)result)
+		*route_port = RIO_INVALID_ROUTE;
+	else
+		*route_port = (u8)result;
+
+	return 0;
+}
+
+static int
+idtg2_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table)
+{
+	u32 i;
+
+	/*
+	 * Select routing table to read
+	 */
+	if (table == RIO_GLOBAL_TABLE)
+		table = 0;
+	else
+		table++;
+
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  LOCAL_RTE_CONF_DESTID_SEL, table);
+
+	for (i = RIO_STD_RTE_CONF_EXTCFGEN;
+	     i <= (RIO_STD_RTE_CONF_EXTCFGEN | 0xff);) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+			RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
+		rio_mport_write_config_32(mport, destid, hopcount,
+			RIO_STD_RTE_CONF_PORT_SEL_CSR,
+			(IDT_DEFAULT_ROUTE << 24) | (IDT_DEFAULT_ROUTE << 16) |
+			(IDT_DEFAULT_ROUTE << 8) | IDT_DEFAULT_ROUTE);
+		i += 4;
+	}
+
+	return 0;
+}
+
+
+static int
+idtg2_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 sw_domain)
+{
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  IDT_RIO_DOMAIN, (u32)sw_domain);
+	return 0;
+}
+
+static int
+idtg2_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 *sw_domain)
+{
+	u32 regval;
+
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+	rio_mport_read_config_32(mport, destid, hopcount,
+				IDT_RIO_DOMAIN, &regval);
+
+	*sw_domain = (u8)(regval & 0xff);
+
+	return 0;
+}
+
+static int
+idtg2_em_init(struct rio_dev *rdev)
+{
+	u32 regval;
+	int i, tmp;
+
+	/*
+	 * This routine performs device-specific initialization only.
+	 * All standard EM configuration should be performed at upper level.
+	 */
+
+	pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount);
+
+	/* Set Port-Write info CSR: PRIO=3 and CRF=1 */
+	rio_write_config_32(rdev, IDT_PW_INFO_CSR, 0x0000e000);
+
+	/*
+	 * Configure LT LAYER error reporting.
+	 */
+
+	/* Enable standard (RIO.p8) error reporting */
+	rio_write_config_32(rdev, IDT_LT_ERR_REPORT_EN,
+			REM_LTL_ERR_ILLTRAN | REM_LTL_ERR_UNSOLR |
+			REM_LTL_ERR_UNSUPTR);
+
+	/* Use Port-Writes for LT layer error reporting.
+	 * Enable per-port reset
+	 */
+	rio_read_config_32(rdev, IDT_DEV_CTRL_1, &regval);
+	rio_write_config_32(rdev, IDT_DEV_CTRL_1,
+			regval | IDT_DEV_CTRL_1_GENPW | IDT_DEV_CTRL_1_PRSTBEH);
+
+	/*
+	 * Configure PORT error reporting.
+	 */
+
+	/* Report all RIO.p8 errors supported by device */
+	rio_write_config_32(rdev, IDT_PORT_ERR_REPORT_EN_BC, 0x807e8037);
+
+	/* Configure reporting of implementation specific errors/events */
+	rio_write_config_32(rdev, IDT_PORT_ISERR_REPORT_EN_BC,
+			    IDT_PORT_INIT_TX_ACQUIRED);
+
+	/* Use Port-Writes for port error reporting and enable error logging */
+	tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo);
+	for (i = 0; i < tmp; i++) {
+		rio_read_config_32(rdev, IDT_PORT_OPS(i), &regval);
+		rio_write_config_32(rdev,
+				IDT_PORT_OPS(i), regval | IDT_PORT_OPS_GENPW |
+				IDT_PORT_OPS_PL_ELOG |
+				IDT_PORT_OPS_LL_ELOG |
+				IDT_PORT_OPS_LT_ELOG);
+	}
+	/* Overwrite error log if full */
+	rio_write_config_32(rdev, IDT_ERR_CAP, IDT_ERR_CAP_LOG_OVERWR);
+
+	/*
+	 * Configure LANE error reporting.
+	 */
+
+	/* Disable line error reporting */
+	rio_write_config_32(rdev, IDT_LANE_ERR_REPORT_EN_BC, 0);
+
+	/* Use Port-Writes for lane error reporting (when enabled)
+	 * (do per-lane update because lanes may have different configuration)
+	 */
+	tmp = (rdev->did == RIO_DID_IDTCPS1848) ? 48 : 16;
+	for (i = 0; i < tmp; i++) {
+		rio_read_config_32(rdev, IDT_LANE_CTRL(i), &regval);
+		rio_write_config_32(rdev, IDT_LANE_CTRL(i),
+				    regval | IDT_LANE_CTRL_GENPW);
+	}
+
+	/*
+	 * Configure AUX error reporting.
+	 */
+
+	/* Disable JTAG and I2C Error capture */
+	rio_write_config_32(rdev, IDT_AUX_PORT_ERR_CAP_EN, 0);
+
+	/* Disable JTAG and I2C Error reporting/logging */
+	rio_write_config_32(rdev, IDT_AUX_ERR_REPORT_EN, 0);
+
+	/* Disable Port-Write notification from JTAG */
+	rio_write_config_32(rdev, IDT_JTAG_CTRL, 0);
+
+	/* Disable Port-Write notification from I2C */
+	rio_read_config_32(rdev, IDT_I2C_MCTRL, &regval);
+	rio_write_config_32(rdev, IDT_I2C_MCTRL, regval & ~IDT_I2C_MCTRL_GENPW);
+
+	/*
+	 * Configure CFG_BLK error reporting.
+	 */
+
+	/* Disable Configuration Block error capture */
+	rio_write_config_32(rdev, IDT_CFGBLK_ERR_CAPTURE_EN, 0);
+
+	/* Disable Port-Writes for Configuration Block error reporting */
+	rio_read_config_32(rdev, IDT_CFGBLK_ERR_REPORT, &regval);
+	rio_write_config_32(rdev, IDT_CFGBLK_ERR_REPORT,
+			    regval & ~IDT_CFGBLK_ERR_REPORT_GENPW);
+
+	/* set TVAL = ~50us */
+	rio_write_config_32(rdev,
+		rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
+
+	return 0;
+}
+
+static int
+idtg2_em_handler(struct rio_dev *rdev, u8 portnum)
+{
+	u32 regval, em_perrdet, em_ltlerrdet;
+
+	rio_read_config_32(rdev,
+		rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet);
+	if (em_ltlerrdet) {
+		/* Service Logical/Transport Layer Error(s) */
+		if (em_ltlerrdet & REM_LTL_ERR_IMPSPEC) {
+			/* Implementation specific error reported */
+			rio_read_config_32(rdev,
+					IDT_ISLTL_ADDRESS_CAP, &regval);
+
+			pr_debug("RIO: %s Implementation Specific LTL errors" \
+				 " 0x%x @(0x%x)\n",
+				 rio_name(rdev), em_ltlerrdet, regval);
+
+			/* Clear implementation specific address capture CSR */
+			rio_write_config_32(rdev, IDT_ISLTL_ADDRESS_CAP, 0);
+
+		}
+	}
+
+	rio_read_config_32(rdev,
+		rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet);
+	if (em_perrdet) {
+		/* Service Port-Level Error(s) */
+		if (em_perrdet & REM_PED_IMPL_SPEC) {
+			/* Implementation Specific port error reported */
+
+			/* Get IS errors reported */
+			rio_read_config_32(rdev,
+					IDT_PORT_ISERR_DET(portnum), &regval);
+
+			pr_debug("RIO: %s Implementation Specific Port" \
+				 " errors 0x%x\n", rio_name(rdev), regval);
+
+			/* Clear all implementation specific events */
+			rio_write_config_32(rdev,
+					IDT_PORT_ISERR_DET(portnum), 0);
+		}
+	}
+
+	return 0;
+}
+
+static ssize_t
+idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct rio_dev *rdev = to_rio_dev(dev);
+	ssize_t len = 0;
+	u32 regval;
+
+	while (!rio_read_config_32(rdev, IDT_ERR_RD, &regval)) {
+		if (!regval)    /* 0 = end of log */
+			break;
+		len += snprintf(buf + len, PAGE_SIZE - len,
+					"%08x\n", regval);
+		if (len >= (PAGE_SIZE - 10))
+			break;
+	}
+
+	return len;
+}
+
+static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL);
+
+static int idtg2_sysfs(struct rio_dev *rdev, bool create)
+{
+	struct device *dev = &rdev->dev;
+	int err = 0;
+
+	if (create) {
+		/* Initialize sysfs entries */
+		err = device_create_file(dev, &dev_attr_errlog);
+		if (err)
+			dev_err(dev, "Unable create sysfs errlog file\n");
+	} else
+		device_remove_file(dev, &dev_attr_errlog);
+
+	return err;
+}
+
+static struct rio_switch_ops idtg2_switch_ops = {
+	.owner = THIS_MODULE,
+	.add_entry = idtg2_route_add_entry,
+	.get_entry = idtg2_route_get_entry,
+	.clr_table = idtg2_route_clr_table,
+	.set_domain = idtg2_set_domain,
+	.get_domain = idtg2_get_domain,
+	.em_init = idtg2_em_init,
+	.em_handle = idtg2_em_handler,
+};
+
+static int idtg2_probe(struct rio_dev *rdev, const struct rio_device_id *id)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+
+	spin_lock(&rdev->rswitch->lock);
+
+	if (rdev->rswitch->ops) {
+		spin_unlock(&rdev->rswitch->lock);
+		return -EINVAL;
+	}
+
+	rdev->rswitch->ops = &idtg2_switch_ops;
+
+	if (rdev->do_enum) {
+		/* Ensure that default routing is disabled on startup */
+		rio_write_config_32(rdev,
+				    RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE);
+	}
+
+	spin_unlock(&rdev->rswitch->lock);
+
+	/* Create device-specific sysfs attributes */
+	idtg2_sysfs(rdev, true);
+
+	return 0;
+}
+
+static void idtg2_remove(struct rio_dev *rdev)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	spin_lock(&rdev->rswitch->lock);
+	if (rdev->rswitch->ops != &idtg2_switch_ops) {
+		spin_unlock(&rdev->rswitch->lock);
+		return;
+	}
+	rdev->rswitch->ops = NULL;
+	spin_unlock(&rdev->rswitch->lock);
+	/* Remove device-specific sysfs attributes */
+	idtg2_sysfs(rdev, false);
+}
+
+static const struct rio_device_id idtg2_id_table[] = {
+	{RIO_DEVICE(RIO_DID_IDTCPS1848, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTCPS1616, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTVPS1616, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTSPS1616, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTCPS1432, RIO_VID_IDT)},
+	{ 0, }	/* terminate list */
+};
+
+static struct rio_driver idtg2_driver = {
+	.name = "idt_gen2",
+	.id_table = idtg2_id_table,
+	.probe = idtg2_probe,
+	.remove = idtg2_remove,
+};
+
+static int __init idtg2_init(void)
+{
+	return rio_register_driver(&idtg2_driver);
+}
+
+static void __exit idtg2_exit(void)
+{
+	pr_debug("RIO: %s\n", __func__);
+	rio_unregister_driver(&idtg2_driver);
+	pr_debug("RIO: %s done\n", __func__);
+}
+
+device_initcall(idtg2_init);
+module_exit(idtg2_exit);
+
+MODULE_DESCRIPTION("IDT CPS Gen.2 Serial RapidIO switch family driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");

linux-7.2.3/drivers/rapidio/switches/idt_gen3.c

@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * IDT RXS Gen.3 Serial RapidIO switch family support
+ *
+ * Copyright 2016 Integrated Device Technology, Inc.
+ */
+
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+
+#include <asm/page.h>
+#include "../rio.h"
+
+#define RIO_EM_PW_STAT		0x40020
+#define RIO_PW_CTL		0x40204
+#define RIO_PW_CTL_PW_TMR		0xffffff00
+#define RIO_PW_ROUTE		0x40208
+
+#define RIO_EM_DEV_INT_EN	0x40030
+
+#define RIO_PLM_SPx_IMP_SPEC_CTL(x)	(0x10100 + (x)*0x100)
+#define RIO_PLM_SPx_IMP_SPEC_CTL_SOFT_RST	0x02000000
+
+#define RIO_PLM_SPx_PW_EN(x)	(0x10118 + (x)*0x100)
+#define RIO_PLM_SPx_PW_EN_OK2U	0x40000000
+#define RIO_PLM_SPx_PW_EN_LINIT 0x10000000
+
+#define RIO_BC_L2_Gn_ENTRYx_CSR(n, x)	(0x31000 + (n)*0x400 + (x)*0x4)
+#define RIO_SPx_L2_Gn_ENTRYy_CSR(x, n, y) \
+				(0x51000 + (x)*0x2000 + (n)*0x400 + (y)*0x4)
+
+static int
+idtg3_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 route_port)
+{
+	u32 rval;
+	u32 entry = route_port;
+	int err = 0;
+
+	pr_debug("RIO: %s t=0x%x did_%x to p_%x\n",
+		 __func__, table, route_destid, entry);
+
+	if (route_destid > 0xFF)
+		return -EINVAL;
+
+	if (route_port == RIO_INVALID_ROUTE)
+		entry = RIO_RT_ENTRY_DROP_PKT;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		/* Use broadcast register to update all per-port tables */
+		err = rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_BC_L2_Gn_ENTRYx_CSR(0, route_destid),
+				entry);
+		return err;
+	}
+
+	/*
+	 * Verify that specified port/table number is valid
+	 */
+	err = rio_mport_read_config_32(mport, destid, hopcount,
+				       RIO_SWP_INFO_CAR, &rval);
+	if (err)
+		return err;
+
+	if (table >= RIO_GET_TOTAL_PORTS(rval))
+		return -EINVAL;
+
+	err = rio_mport_write_config_32(mport, destid, hopcount,
+			RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, route_destid),
+			entry);
+	return err;
+}
+
+static int
+idtg3_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 *route_port)
+{
+	u32 rval;
+	int err;
+
+	if (route_destid > 0xFF)
+		return -EINVAL;
+
+	err = rio_mport_read_config_32(mport, destid, hopcount,
+				       RIO_SWP_INFO_CAR, &rval);
+	if (err)
+		return err;
+
+	/*
+	 * This switch device does not have the dedicated global routing table.
+	 * It is substituted by reading routing table of the ingress port of
+	 * maintenance read requests.
+	 */
+	if (table == RIO_GLOBAL_TABLE)
+		table = RIO_GET_PORT_NUM(rval);
+	else if (table >= RIO_GET_TOTAL_PORTS(rval))
+		return -EINVAL;
+
+	err = rio_mport_read_config_32(mport, destid, hopcount,
+			RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, route_destid),
+			&rval);
+	if (err)
+		return err;
+
+	if (rval == RIO_RT_ENTRY_DROP_PKT)
+		*route_port = RIO_INVALID_ROUTE;
+	else
+		*route_port = (u8)rval;
+
+	return 0;
+}
+
+static int
+idtg3_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table)
+{
+	u32 i;
+	u32 rval;
+	int err;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		for (i = 0; i <= 0xff; i++) {
+			err = rio_mport_write_config_32(mport, destid, hopcount,
+						RIO_BC_L2_Gn_ENTRYx_CSR(0, i),
+						RIO_RT_ENTRY_DROP_PKT);
+			if (err)
+				break;
+		}
+
+		return err;
+	}
+
+	err = rio_mport_read_config_32(mport, destid, hopcount,
+				       RIO_SWP_INFO_CAR, &rval);
+	if (err)
+		return err;
+
+	if (table >= RIO_GET_TOTAL_PORTS(rval))
+		return -EINVAL;
+
+	for (i = 0; i <= 0xff; i++) {
+		err = rio_mport_write_config_32(mport, destid, hopcount,
+					RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, i),
+					RIO_RT_ENTRY_DROP_PKT);
+		if (err)
+			break;
+	}
+
+	return err;
+}
+
+/*
+ * This routine performs device-specific initialization only.
+ * All standard EM configuration should be performed at upper level.
+ */
+static int
+idtg3_em_init(struct rio_dev *rdev)
+{
+	int i, tmp;
+	u32 rval;
+
+	pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount);
+
+	/* Disable assertion of interrupt signal */
+	rio_write_config_32(rdev, RIO_EM_DEV_INT_EN, 0);
+
+	/* Disable port-write event notifications during initialization */
+	rio_write_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TX_CTRL,
+			    RIO_EM_PW_TX_CTRL_PW_DIS);
+
+	/* Configure Port-Write notifications for hot-swap events */
+	tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo);
+	for (i = 0; i < tmp; i++) {
+
+		rio_read_config_32(rdev,
+			RIO_DEV_PORT_N_ERR_STS_CSR(rdev, i),
+			&rval);
+		if (rval & RIO_PORT_N_ERR_STS_PORT_UA)
+			continue;
+
+		/* Clear events signaled before enabling notification */
+		rio_write_config_32(rdev,
+			rdev->em_efptr + RIO_EM_PN_ERR_DETECT(i), 0);
+
+		/* Enable event notifications */
+		rio_write_config_32(rdev,
+			rdev->em_efptr + RIO_EM_PN_ERRRATE_EN(i),
+			RIO_EM_PN_ERRRATE_EN_OK2U | RIO_EM_PN_ERRRATE_EN_U2OK);
+		/* Enable port-write generation on events */
+		rio_write_config_32(rdev, RIO_PLM_SPx_PW_EN(i),
+			RIO_PLM_SPx_PW_EN_OK2U | RIO_PLM_SPx_PW_EN_LINIT);
+
+	}
+
+	/* Set Port-Write destination port */
+	tmp = RIO_GET_PORT_NUM(rdev->swpinfo);
+	rio_write_config_32(rdev, RIO_PW_ROUTE, 1 << tmp);
+
+
+	/* Enable sending port-write event notifications */
+	rio_write_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TX_CTRL, 0);
+
+	/* set TVAL = ~50us */
+	rio_write_config_32(rdev,
+		rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
+	return 0;
+}
+
+
+/*
+ * idtg3_em_handler - device-specific error handler
+ *
+ * If the link is down (PORT_UNINIT) does nothing - this is considered
+ * as link partner removal from the port.
+ *
+ * If the link is up (PORT_OK) - situation is handled as *new* device insertion.
+ * In this case ERR_STOP bits are cleared by issuing soft reset command to the
+ * reporting port. Inbound and outbound ackIDs are cleared by the reset as well.
+ * This way the port is synchronized with freshly inserted device (assuming it
+ * was reset/powered-up on insertion).
+ *
+ * TODO: This is not sufficient in a situation when a link between two devices
+ * was down and up again (e.g. cable disconnect). For that situation full ackID
+ * realignment process has to be implemented.
+ */
+static int
+idtg3_em_handler(struct rio_dev *rdev, u8 pnum)
+{
+	u32 err_status;
+	u32 rval;
+
+	rio_read_config_32(rdev,
+			RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
+			&err_status);
+
+	/* Do nothing for device/link removal */
+	if (err_status & RIO_PORT_N_ERR_STS_PORT_UNINIT)
+		return 0;
+
+	/* When link is OK we have a device insertion.
+	 * Request port soft reset to clear errors if they present.
+	 * Inbound and outbound ackIDs will be 0 after reset.
+	 */
+	if (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
+				RIO_PORT_N_ERR_STS_INP_ES)) {
+		rio_read_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum), &rval);
+		rio_write_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum),
+				    rval | RIO_PLM_SPx_IMP_SPEC_CTL_SOFT_RST);
+		udelay(10);
+		rio_write_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum), rval);
+		msleep(500);
+	}
+
+	return 0;
+}
+
+static struct rio_switch_ops idtg3_switch_ops = {
+	.owner = THIS_MODULE,
+	.add_entry = idtg3_route_add_entry,
+	.get_entry = idtg3_route_get_entry,
+	.clr_table = idtg3_route_clr_table,
+	.em_init   = idtg3_em_init,
+	.em_handle = idtg3_em_handler,
+};
+
+static int idtg3_probe(struct rio_dev *rdev, const struct rio_device_id *id)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+
+	spin_lock(&rdev->rswitch->lock);
+
+	if (rdev->rswitch->ops) {
+		spin_unlock(&rdev->rswitch->lock);
+		return -EINVAL;
+	}
+
+	rdev->rswitch->ops = &idtg3_switch_ops;
+
+	if (rdev->do_enum) {
+		/* Disable hierarchical routing support: Existing fabric
+		 * enumeration/discovery process (see rio-scan.c) uses 8-bit
+		 * flat destination ID routing only.
+		 */
+		rio_write_config_32(rdev, 0x5000 + RIO_BC_RT_CTL_CSR, 0);
+	}
+
+	spin_unlock(&rdev->rswitch->lock);
+
+	return 0;
+}
+
+static void idtg3_remove(struct rio_dev *rdev)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	spin_lock(&rdev->rswitch->lock);
+	if (rdev->rswitch->ops == &idtg3_switch_ops)
+		rdev->rswitch->ops = NULL;
+	spin_unlock(&rdev->rswitch->lock);
+}
+
+/*
+ * Gen3 switches repeat sending PW messages until a corresponding event flag
+ * is cleared. Use shutdown notification to disable generation of port-write
+ * messages if their destination node is shut down.
+ */
+static void idtg3_shutdown(struct rio_dev *rdev)
+{
+	int i;
+	u32 rval;
+	u16 destid;
+
+	/* Currently the enumerator node acts also as PW handler */
+	if (!rdev->do_enum)
+		return;
+
+	pr_debug("RIO: %s(%s)\n", __func__, rio_name(rdev));
+
+	rio_read_config_32(rdev, RIO_PW_ROUTE, &rval);
+	i = RIO_GET_PORT_NUM(rdev->swpinfo);
+
+	/* Check port-write destination port */
+	if (!((1 << i) & rval))
+		return;
+
+	/* Disable sending port-write event notifications if PW destID
+	 * matches to one of the enumerator node
+	 */
+	rio_read_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TGT_DEVID, &rval);
+
+	if (rval & RIO_EM_PW_TGT_DEVID_DEV16)
+		destid = rval >> 16;
+	else
+		destid = ((rval & RIO_EM_PW_TGT_DEVID_D8) >> 16);
+
+	if (rdev->net->hport->host_deviceid == destid) {
+		rio_write_config_32(rdev,
+				    rdev->em_efptr + RIO_EM_PW_TX_CTRL, 0);
+		pr_debug("RIO: %s(%s) PW transmission disabled\n",
+			 __func__, rio_name(rdev));
+	}
+}
+
+static const struct rio_device_id idtg3_id_table[] = {
+	{RIO_DEVICE(RIO_DID_IDTRXS1632, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTRXS2448, RIO_VID_IDT)},
+	{ 0, }	/* terminate list */
+};
+
+static struct rio_driver idtg3_driver = {
+	.name = "idt_gen3",
+	.id_table = idtg3_id_table,
+	.probe = idtg3_probe,
+	.remove = idtg3_remove,
+	.shutdown = idtg3_shutdown,
+};
+
+static int __init idtg3_init(void)
+{
+	return rio_register_driver(&idtg3_driver);
+}
+
+static void __exit idtg3_exit(void)
+{
+	pr_debug("RIO: %s\n", __func__);
+	rio_unregister_driver(&idtg3_driver);
+	pr_debug("RIO: %s done\n", __func__);
+}
+
+device_initcall(idtg3_init);
+module_exit(idtg3_exit);
+
+MODULE_DESCRIPTION("IDT RXS Gen.3 Serial RapidIO switch family driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");

linux-7.2.3/drivers/rapidio/switches/idtcps.c

@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * IDT CPS RapidIO switches support
+ *
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/module.h>
+#include "../rio.h"
+
+#define CPS_DEFAULT_ROUTE	0xde
+#define CPS_NO_ROUTE		0xdf
+
+#define IDTCPS_RIO_DOMAIN 0xf20020
+
+static int
+idtcps_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 route_port)
+{
+	u32 result;
+
+	if (route_port == RIO_INVALID_ROUTE)
+		route_port = CPS_DEFAULT_ROUTE;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+
+		rio_mport_read_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+		result = (0xffffff00 & result) | (u32)route_port;
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR, result);
+	}
+
+	return 0;
+}
+
+static int
+idtcps_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table, u16 route_destid, u8 *route_port)
+{
+	u32 result;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+
+		rio_mport_read_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+		if (CPS_DEFAULT_ROUTE == (u8)result ||
+		    CPS_NO_ROUTE == (u8)result)
+			*route_port = RIO_INVALID_ROUTE;
+		else
+			*route_port = (u8)result;
+	}
+
+	return 0;
+}
+
+static int
+idtcps_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u16 table)
+{
+	u32 i;
+
+	if (table == RIO_GLOBAL_TABLE) {
+		for (i = 0x80000000; i <= 0x800000ff;) {
+			rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
+			rio_mport_write_config_32(mport, destid, hopcount,
+				RIO_STD_RTE_CONF_PORT_SEL_CSR,
+				(CPS_DEFAULT_ROUTE << 24) |
+				(CPS_DEFAULT_ROUTE << 16) |
+				(CPS_DEFAULT_ROUTE << 8) | CPS_DEFAULT_ROUTE);
+			i += 4;
+		}
+	}
+
+	return 0;
+}
+
+static int
+idtcps_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 sw_domain)
+{
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+	rio_mport_write_config_32(mport, destid, hopcount,
+				  IDTCPS_RIO_DOMAIN, (u32)sw_domain);
+	return 0;
+}
+
+static int
+idtcps_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+		       u8 *sw_domain)
+{
+	u32 regval;
+
+	/*
+	 * Switch domain configuration operates only at global level
+	 */
+	rio_mport_read_config_32(mport, destid, hopcount,
+				IDTCPS_RIO_DOMAIN, &regval);
+
+	*sw_domain = (u8)(regval & 0xff);
+
+	return 0;
+}
+
+static struct rio_switch_ops idtcps_switch_ops = {
+	.owner = THIS_MODULE,
+	.add_entry = idtcps_route_add_entry,
+	.get_entry = idtcps_route_get_entry,
+	.clr_table = idtcps_route_clr_table,
+	.set_domain = idtcps_set_domain,
+	.get_domain = idtcps_get_domain,
+	.em_init = NULL,
+	.em_handle = NULL,
+};
+
+static int idtcps_probe(struct rio_dev *rdev, const struct rio_device_id *id)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+
+	spin_lock(&rdev->rswitch->lock);
+
+	if (rdev->rswitch->ops) {
+		spin_unlock(&rdev->rswitch->lock);
+		return -EINVAL;
+	}
+
+	rdev->rswitch->ops = &idtcps_switch_ops;
+
+	if (rdev->do_enum) {
+		/* set TVAL = ~50us */
+		rio_write_config_32(rdev,
+			rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
+		/* Ensure that default routing is disabled on startup */
+		rio_write_config_32(rdev,
+				    RIO_STD_RTE_DEFAULT_PORT, CPS_NO_ROUTE);
+	}
+
+	spin_unlock(&rdev->rswitch->lock);
+	return 0;
+}
+
+static void idtcps_remove(struct rio_dev *rdev)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	spin_lock(&rdev->rswitch->lock);
+	if (rdev->rswitch->ops != &idtcps_switch_ops) {
+		spin_unlock(&rdev->rswitch->lock);
+		return;
+	}
+	rdev->rswitch->ops = NULL;
+	spin_unlock(&rdev->rswitch->lock);
+}
+
+static const struct rio_device_id idtcps_id_table[] = {
+	{RIO_DEVICE(RIO_DID_IDTCPS6Q, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTCPS8, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTCPS10Q, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTCPS12, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDTCPS16, RIO_VID_IDT)},
+	{RIO_DEVICE(RIO_DID_IDT70K200, RIO_VID_IDT)},
+	{ 0, }	/* terminate list */
+};
+
+static struct rio_driver idtcps_driver = {
+	.name = "idtcps",
+	.id_table = idtcps_id_table,
+	.probe = idtcps_probe,
+	.remove = idtcps_remove,
+};
+
+static int __init idtcps_init(void)
+{
+	return rio_register_driver(&idtcps_driver);
+}
+
+static void __exit idtcps_exit(void)
+{
+	rio_unregister_driver(&idtcps_driver);
+}
+
+device_initcall(idtcps_init);
+module_exit(idtcps_exit);
+
+MODULE_DESCRIPTION("IDT CPS Gen.1 Serial RapidIO switch family driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");