Resguardo inicial

This commit is contained in:
lastdragon
2026-09-06 12:53:21 -06:00
parent 662efe3c2a
commit ad2088d178
94853 changed files with 43200404 additions and 0 deletions
+29
View File
@@ -0,0 +1,29 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Loongson-2 series SoC drivers
#
config LOONGSON2_GUTS
tristate "Loongson-2 SoC Global UtiliTieS (GUTS) register block"
depends on LOONGARCH || COMPILE_TEST
select SOC_BUS
help
The global utilities block controls PCIE device enabling, alternate
function selection for multiplexed signals, consistency of HDA, USB
and PCIE, configuration of memory controller, rtc controller, lio
controller, and clock control. This patch adds a driver to manage
and access global utilities block for LoongArch architecture Loongson-2
SoCs. Initially only reading SVR and registering soc device are
supported. Other guts accesses, such as reading firmware configuration
by default, should eventually be added into this driver as well.
config LOONGSON2_PM
bool "Loongson-2 SoC Power Management Controller Driver"
depends on LOONGARCH && OF
depends on INPUT=y
help
The Loongson-2's power management controller was ACPI, supports ACPI
S2Idle (Suspend To Idle), ACPI S3 (Suspend To RAM), ACPI S4 (Suspend To
Disk), ACPI S5 (Soft Shutdown) and supports multiple wake-up methods
(USB, GMAC, PWRBTN, etc.). This driver was to add power management
controller support that base on dts for Loongson-2 series SoCs.
@@ -0,0 +1,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Makefile for the Linux Kernel SoC Loongson-2 specific device drivers
#
obj-$(CONFIG_LOONGSON2_GUTS) += loongson2_guts.o
obj-$(CONFIG_LOONGSON2_PM) += loongson2_pm.o
@@ -0,0 +1,191 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Author: Yinbo Zhu <zhuyinbo@loongson.cn>
* Copyright (C) 2022-2023 Loongson Technology Corporation Limited
*/
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/of_fdt.h>
#include <linux/sys_soc.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
static struct soc_device_attribute soc_dev_attr;
static struct soc_device *soc_dev;
/*
* Global Utility Registers.
*
* Not all registers defined in this structure are available on all chips, so
* you are expected to know whether a given register actually exists on your
* chip before you access it.
*
* Also, some registers are similar on different chips but have slightly
* different names. In these cases, one name is chosen to avoid extraneous
* #ifdefs.
*/
struct scfg_guts {
u32 svr; /* Version Register */
u8 res0[4];
u16 feature; /* Feature Register */
u32 vendor; /* Vendor Register */
u8 res1[6];
u32 id;
u8 res2[0x3ff8 - 0x18];
u32 chip;
};
static struct guts {
struct scfg_guts __iomem *regs;
bool little_endian;
} *guts;
struct loongson2_soc_die_attr {
char *die;
u32 svr;
u32 mask;
};
/* SoC die attribute definition for Loongson-2 platform */
static const struct loongson2_soc_die_attr loongson2_soc_die[] = {
/*
* LoongArch-based SoCs Loongson-2 Series
*/
/* Die: 2k1000, SoC: 2k1000 */
{ .die = "2K1000",
.svr = 0x00000013,
.mask = 0x000000ff,
},
{ },
};
static const struct loongson2_soc_die_attr *loongson2_soc_die_match(
u32 svr, const struct loongson2_soc_die_attr *matches)
{
while (matches->svr) {
if (matches->svr == (svr & matches->mask))
return matches;
matches++;
}
return NULL;
}
static u32 loongson2_guts_get_svr(void)
{
u32 svr = 0;
if (!guts || !guts->regs)
return svr;
if (guts->little_endian)
svr = ioread32(&guts->regs->svr);
else
svr = ioread32be(&guts->regs->svr);
return svr;
}
static int loongson2_guts_probe(struct platform_device *pdev)
{
struct device_node *root, *np = pdev->dev.of_node;
struct device *dev = &pdev->dev;
const struct loongson2_soc_die_attr *soc_die;
const char *machine;
u32 svr;
/* Initialize guts */
guts = devm_kzalloc(dev, sizeof(*guts), GFP_KERNEL);
if (!guts)
return -ENOMEM;
guts->little_endian = of_property_read_bool(np, "little-endian");
guts->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(guts->regs))
return PTR_ERR(guts->regs);
/* Register soc device */
root = of_find_node_by_path("/");
if (of_property_read_string(root, "model", &machine))
of_property_read_string_index(root, "compatible", 0, &machine);
of_node_put(root);
if (machine) {
soc_dev_attr.machine = devm_kstrdup(dev, machine, GFP_KERNEL);
if (!soc_dev_attr.machine)
return -ENOMEM;
}
svr = loongson2_guts_get_svr();
soc_die = loongson2_soc_die_match(svr, loongson2_soc_die);
if (soc_die) {
soc_dev_attr.family = devm_kasprintf(dev, GFP_KERNEL,
"Loongson %s", soc_die->die);
} else {
soc_dev_attr.family = devm_kasprintf(dev, GFP_KERNEL, "Loongson");
}
if (!soc_dev_attr.family)
return -ENOMEM;
soc_dev_attr.soc_id = devm_kasprintf(dev, GFP_KERNEL,
"svr:0x%08x", svr);
if (!soc_dev_attr.soc_id)
return -ENOMEM;
soc_dev_attr.revision = devm_kasprintf(dev, GFP_KERNEL, "%d.%d",
(svr >> 4) & 0xf, svr & 0xf);
if (!soc_dev_attr.revision)
return -ENOMEM;
soc_dev = soc_device_register(&soc_dev_attr);
if (IS_ERR(soc_dev))
return PTR_ERR(soc_dev);
pr_info("Machine: %s\n", soc_dev_attr.machine);
pr_info("SoC family: %s\n", soc_dev_attr.family);
pr_info("SoC ID: %s, Revision: %s\n",
soc_dev_attr.soc_id, soc_dev_attr.revision);
return 0;
}
static void loongson2_guts_remove(struct platform_device *dev)
{
soc_device_unregister(soc_dev);
}
/*
* Table for matching compatible strings, for device tree
* guts node, for Loongson-2 SoCs.
*/
static const struct of_device_id loongson2_guts_of_match[] = {
{ .compatible = "loongson,ls2k-chipid", },
{}
};
MODULE_DEVICE_TABLE(of, loongson2_guts_of_match);
static struct platform_driver loongson2_guts_driver = {
.driver = {
.name = "loongson2-guts",
.of_match_table = loongson2_guts_of_match,
},
.probe = loongson2_guts_probe,
.remove = loongson2_guts_remove,
};
static int __init loongson2_guts_init(void)
{
return platform_driver_register(&loongson2_guts_driver);
}
core_initcall(loongson2_guts_init);
static void __exit loongson2_guts_exit(void)
{
platform_driver_unregister(&loongson2_guts_driver);
}
module_exit(loongson2_guts_exit);
MODULE_DESCRIPTION("Loongson2 GUTS driver");
MODULE_LICENSE("GPL");
@@ -0,0 +1,220 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Loongson-2 PM Support
*
* Copyright (C) 2023 Loongson Technology Corporation Limited
*/
#include <linux/io.h>
#include <linux/of.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/suspend.h>
#include <linux/interrupt.h>
#include <linux/of_platform.h>
#include <linux/pm_wakeirq.h>
#include <linux/platform_device.h>
#include <asm/bootinfo.h>
#include <asm/suspend.h>
#define LOONGSON2_PM1_CNT_REG 0x14
#define LOONGSON2_PM1_STS_REG 0x0c
#define LOONGSON2_PM1_ENA_REG 0x10
#define LOONGSON2_GPE0_STS_REG 0x28
#define LOONGSON2_GPE0_ENA_REG 0x2c
#define LOONGSON2_PM1_PWRBTN_STS BIT(8)
#define LOONGSON2_PM1_PCIEXP_WAKE_STS BIT(14)
#define LOONGSON2_PM1_WAKE_STS BIT(15)
#define LOONGSON2_PM1_CNT_INT_EN BIT(0)
#define LOONGSON2_PM1_PWRBTN_EN LOONGSON2_PM1_PWRBTN_STS
static struct loongson2_pm {
void __iomem *base;
struct input_dev *dev;
bool suspended;
} loongson2_pm;
#define loongson2_pm_readw(reg) readw(loongson2_pm.base + reg)
#define loongson2_pm_readl(reg) readl(loongson2_pm.base + reg)
#define loongson2_pm_writew(val, reg) writew(val, loongson2_pm.base + reg)
#define loongson2_pm_writel(val, reg) writel(val, loongson2_pm.base + reg)
static void loongson2_pm_status_clear(void)
{
u16 value;
value = loongson2_pm_readw(LOONGSON2_PM1_STS_REG);
value |= (LOONGSON2_PM1_PWRBTN_STS | LOONGSON2_PM1_PCIEXP_WAKE_STS |
LOONGSON2_PM1_WAKE_STS);
loongson2_pm_writew(value, LOONGSON2_PM1_STS_REG);
loongson2_pm_writel(loongson2_pm_readl(LOONGSON2_GPE0_STS_REG), LOONGSON2_GPE0_STS_REG);
}
static void loongson2_pm_irq_enable(void)
{
u16 value;
value = loongson2_pm_readw(LOONGSON2_PM1_CNT_REG);
value |= LOONGSON2_PM1_CNT_INT_EN;
loongson2_pm_writew(value, LOONGSON2_PM1_CNT_REG);
value = loongson2_pm_readw(LOONGSON2_PM1_ENA_REG);
value |= LOONGSON2_PM1_PWRBTN_EN;
loongson2_pm_writew(value, LOONGSON2_PM1_ENA_REG);
}
static int loongson2_suspend_enter(suspend_state_t state)
{
loongson2_pm_status_clear();
loongarch_common_suspend();
loongarch_suspend_enter();
loongarch_common_resume();
loongson2_pm_irq_enable();
pm_set_resume_via_firmware();
return 0;
}
static int loongson2_suspend_begin(suspend_state_t state)
{
pm_set_suspend_via_firmware();
return 0;
}
static int loongson2_suspend_valid_state(suspend_state_t state)
{
return (state == PM_SUSPEND_MEM);
}
static const struct platform_suspend_ops loongson2_suspend_ops = {
.valid = loongson2_suspend_valid_state,
.begin = loongson2_suspend_begin,
.enter = loongson2_suspend_enter,
};
static int loongson2_power_button_init(struct device *dev, int irq)
{
int ret;
struct input_dev *button;
button = input_allocate_device();
if (!dev)
return -ENOMEM;
button->name = "Power Button";
button->phys = "pm/button/input0";
button->id.bustype = BUS_HOST;
button->dev.parent = NULL;
input_set_capability(button, EV_KEY, KEY_POWER);
ret = input_register_device(button);
if (ret)
goto free_dev;
dev_pm_set_wake_irq(&button->dev, irq);
device_set_wakeup_capable(&button->dev, true);
device_set_wakeup_enable(&button->dev, true);
loongson2_pm.dev = button;
dev_info(dev, "Power Button: Init successful!\n");
return 0;
free_dev:
input_free_device(button);
return ret;
}
static irqreturn_t loongson2_pm_irq_handler(int irq, void *dev_id)
{
u16 status = loongson2_pm_readw(LOONGSON2_PM1_STS_REG);
if (!loongson2_pm.suspended && (status & LOONGSON2_PM1_PWRBTN_STS)) {
pr_info("Power Button pressed...\n");
input_report_key(loongson2_pm.dev, KEY_POWER, 1);
input_sync(loongson2_pm.dev);
input_report_key(loongson2_pm.dev, KEY_POWER, 0);
input_sync(loongson2_pm.dev);
}
loongson2_pm_status_clear();
return IRQ_HANDLED;
}
static int __maybe_unused loongson2_pm_suspend(struct device *dev)
{
loongson2_pm.suspended = true;
return 0;
}
static int __maybe_unused loongson2_pm_resume(struct device *dev)
{
loongson2_pm.suspended = false;
return 0;
}
static SIMPLE_DEV_PM_OPS(loongson2_pm_ops, loongson2_pm_suspend, loongson2_pm_resume);
static int loongson2_pm_probe(struct platform_device *pdev)
{
int irq, retval;
u64 suspend_addr;
struct device *dev = &pdev->dev;
loongson2_pm.base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(loongson2_pm.base))
return PTR_ERR(loongson2_pm.base);
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
if (!device_property_read_u64(dev, "loongson,suspend-address", &suspend_addr))
loongson_sysconf.suspend_addr = (u64)phys_to_virt(suspend_addr);
else
dev_err(dev, "No loongson,suspend-address, could not support S3!\n");
if (loongson2_power_button_init(dev, irq))
return -EINVAL;
retval = devm_request_irq(&pdev->dev, irq, loongson2_pm_irq_handler,
IRQF_SHARED, "pm_irq", &loongson2_pm);
if (retval)
return retval;
loongson2_pm_irq_enable();
loongson2_pm_status_clear();
if (loongson_sysconf.suspend_addr)
suspend_set_ops(&loongson2_suspend_ops);
/* Populate children */
retval = devm_of_platform_populate(dev);
if (retval)
dev_err(dev, "Error populating children, reboot and poweroff might not work properly\n");
return 0;
}
static const struct of_device_id loongson2_pm_match[] = {
{ .compatible = "loongson,ls2k0500-pmc", },
{},
};
static struct platform_driver loongson2_pm_driver = {
.driver = {
.name = "ls2k-pm",
.pm = &loongson2_pm_ops,
.of_match_table = loongson2_pm_match,
},
.probe = loongson2_pm_probe,
};
module_platform_driver(loongson2_pm_driver);
MODULE_DESCRIPTION("Loongson-2 PM driver");
MODULE_LICENSE("GPL");