Resguardo inicial

linux-7.2.3/drivers/usb/dwc2/Kconfig

@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_DWC2
+	tristate "DesignWare USB2 DRD Core Support"
+	depends on HAS_DMA
+	depends on USB || USB_GADGET
+	depends on HAS_IOMEM
+	select USB_ROLE_SWITCH
+	help
+	  Say Y here if your system has a Dual Role Hi-Speed USB
+	  controller based on the DesignWare HSOTG IP Core.
+
+	  For host mode, if you choose to build the driver as dynamically
+	  linked modules, the core module will be called dwc2.ko, the PCI
+	  bus interface module (if you have a PCI bus system) will be
+	  called dwc2_pci.ko, and the platform interface module (for
+	  controllers directly connected to the CPU) will be called
+	  dwc2_platform.ko. For all modes(host, gadget and dual-role), there
+	  will be an additional module named dwc2.ko.
+
+if USB_DWC2
+
+choice
+	prompt "DWC2 Mode Selection"
+	default USB_DWC2_DUAL_ROLE if (USB && USB_GADGET)
+	default USB_DWC2_HOST if (USB && !USB_GADGET)
+	default USB_DWC2_PERIPHERAL if (!USB && USB_GADGET)
+
+config USB_DWC2_HOST
+	bool "Host only mode"
+	depends on USB=y || (USB_DWC2=m && USB)
+	help
+	  The Designware USB2.0 high-speed host controller
+	  integrated into many SoCs. Select this option if you want the
+	  driver to operate in Host-only mode.
+
+comment "Gadget/Dual-role mode requires USB Gadget support to be enabled"
+
+config USB_DWC2_PERIPHERAL
+	bool "Gadget only mode"
+	depends on USB_GADGET=y || USB_GADGET=USB_DWC2
+	help
+	  The Designware USB2.0 high-speed gadget controller
+	  integrated into many SoCs. Select this option if you want the
+	  driver to operate in Peripheral-only mode. This option requires
+	  USB_GADGET to be enabled.
+
+config USB_DWC2_DUAL_ROLE
+	bool "Dual Role mode"
+	depends on (USB=y && USB_GADGET=y) || (USB_DWC2=m && USB && USB_GADGET)
+	help
+	  Select this option if you want the driver to work in a dual-role
+	  mode. In this mode both host and gadget features are enabled, and
+	  the role will be determined by the cable that gets plugged-in. This
+	  option requires USB_GADGET to be enabled.
+endchoice
+
+config USB_DWC2_PCI
+	tristate "DWC2 PCI"
+	depends on USB_PCI
+	depends on USB_GADGET || !USB_GADGET
+	select NOP_USB_XCEIV
+	help
+	  The Designware USB2.0 PCI interface module for controllers
+	  connected to a PCI bus.
+
+config USB_DWC2_DEBUG
+	bool "Enable Debugging Messages"
+	help
+	  Say Y here to enable debugging messages in the DWC2 Driver.
+
+config USB_DWC2_VERBOSE
+	bool "Enable Verbose Debugging Messages"
+	depends on USB_DWC2_DEBUG
+	help
+	  Say Y here to enable verbose debugging messages in the DWC2 Driver.
+	  WARNING: Enabling this will quickly fill your message log.
+	  If in doubt, say N.
+
+config USB_DWC2_TRACK_MISSED_SOFS
+	bool "Enable Missed SOF Tracking"
+	help
+	  Say Y here to enable logging of missed SOF events to the dmesg log.
+	  WARNING: This feature is still experimental.
+	  If in doubt, say N.
+
+config USB_DWC2_DEBUG_PERIODIC
+	bool "Enable Debugging Messages For Periodic Transfers"
+	depends on USB_DWC2_DEBUG || USB_DWC2_VERBOSE
+	default y
+	help
+	  Say N here to disable (verbose) debugging messages to be
+	  logged for periodic transfers. This allows better debugging of
+	  non-periodic transfers, but of course the debug logs will be
+	  incomplete. Note that this also disables some debug messages
+	  for which the transfer type cannot be deduced.
+endif

linux-7.2.3/drivers/usb/dwc2/Makefile

@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+ccflags-$(CONFIG_USB_DWC2_DEBUG)	+= -DDEBUG
+ccflags-$(CONFIG_USB_DWC2_VERBOSE)	+= -DVERBOSE_DEBUG
+
+obj-$(CONFIG_USB_DWC2)			+= dwc2.o
+dwc2-y					:= core.o core_intr.o platform.o drd.o
+dwc2-y					+= params.o
+
+ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
+	dwc2-y				+= hcd.o hcd_intr.o
+	dwc2-y				+= hcd_queue.o hcd_ddma.o
+endif
+
+ifneq ($(filter y,$(CONFIG_USB_DWC2_PERIPHERAL) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
+	dwc2-y       			+= gadget.o
+endif
+
+ifneq ($(CONFIG_DEBUG_FS),)
+	dwc2-y				+= debugfs.o
+endif
+
+# NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to
+# this location and renamed gadget.c. When building for dynamically linked
+# modules, dwc2.ko will get built for host mode, peripheral mode, and dual-role
+# mode. The PCI bus interface module will called dwc2_pci.ko and the platform
+# interface module will be called dwc2_platform.ko.
+
+obj-$(CONFIG_USB_DWC2_PCI)		+= dwc2_pci.o
+dwc2_pci-y				:= pci.o

linux-7.2.3/drivers/usb/dwc2/core_intr.c

@@ -0,0 +1,909 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * core_intr.c - DesignWare HS OTG Controller common interrupt handling
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ */
+
+/*
+ * This file contains the common interrupt handlers
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+
+#include "core.h"
+#include "hcd.h"
+
+static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg)
+{
+	switch (hsotg->op_state) {
+	case OTG_STATE_A_HOST:
+		return "a_host";
+	case OTG_STATE_A_SUSPEND:
+		return "a_suspend";
+	case OTG_STATE_A_PERIPHERAL:
+		return "a_peripheral";
+	case OTG_STATE_B_PERIPHERAL:
+		return "b_peripheral";
+	case OTG_STATE_B_HOST:
+		return "b_host";
+	default:
+		return "unknown";
+	}
+}
+
+/**
+ * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts.
+ * When the PRTINT interrupt fires, there are certain status bits in the Host
+ * Port that needs to get cleared.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 hprt0 = dwc2_readl(hsotg, HPRT0);
+
+	if (hprt0 & HPRT0_ENACHG) {
+		hprt0 &= ~HPRT0_ENA;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+	}
+}
+
+/**
+ * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg)
+{
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_MODEMIS, GINTSTS);
+
+	dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n",
+		 dwc2_is_host_mode(hsotg) ? "Host" : "Device");
+}
+
+/**
+ * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG
+ * Interrupt Register (GOTGINT) to determine what interrupt has occurred.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 gotgint;
+	u32 gotgctl;
+	u32 gintmsk;
+	u32 pcgctl;
+
+	gotgint = dwc2_readl(hsotg, GOTGINT);
+	gotgctl = dwc2_readl(hsotg, GOTGCTL);
+	dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint,
+		dwc2_op_state_str(hsotg));
+
+	if (gotgint & GOTGINT_SES_END_DET) {
+		dev_dbg(hsotg->dev,
+			" ++OTG Interrupt: Session End Detected++ (%s)\n",
+			dwc2_op_state_str(hsotg));
+		gotgctl = dwc2_readl(hsotg, GOTGCTL);
+
+		if (dwc2_is_device_mode(hsotg)) {
+			if (hsotg->params.eusb2_disc) {
+				/* Clear the Gate hclk. */
+				pcgctl = dwc2_readl(hsotg, PCGCTL);
+				pcgctl &= ~PCGCTL_GATEHCLK;
+				dwc2_writel(hsotg, pcgctl, PCGCTL);
+				udelay(5);
+
+				/* Clear Phy Clock bit. */
+				pcgctl = dwc2_readl(hsotg, PCGCTL);
+				pcgctl &= ~PCGCTL_STOPPCLK;
+				dwc2_writel(hsotg, pcgctl, PCGCTL);
+				udelay(5);
+			}
+			dwc2_hsotg_disconnect(hsotg);
+		}
+
+		if (hsotg->op_state == OTG_STATE_B_HOST) {
+			hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+		} else {
+			/*
+			 * If not B_HOST and Device HNP still set, HNP did
+			 * not succeed!
+			 */
+			if (gotgctl & GOTGCTL_DEVHNPEN) {
+				dev_dbg(hsotg->dev, "Session End Detected\n");
+				dev_err(hsotg->dev,
+					"Device Not Connected/Responding!\n");
+			}
+
+			/*
+			 * If Session End Detected the B-Cable has been
+			 * disconnected
+			 */
+			/* Reset to a clean state */
+			hsotg->lx_state = DWC2_L3;
+		}
+
+		gotgctl = dwc2_readl(hsotg, GOTGCTL);
+		gotgctl &= ~GOTGCTL_DEVHNPEN;
+		dwc2_writel(hsotg, gotgctl, GOTGCTL);
+	}
+
+	if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) {
+		dev_dbg(hsotg->dev,
+			" ++OTG Interrupt: Session Request Success Status Change++\n");
+		gotgctl = dwc2_readl(hsotg, GOTGCTL);
+		if (gotgctl & GOTGCTL_SESREQSCS) {
+			if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS &&
+			    hsotg->params.i2c_enable) {
+				hsotg->srp_success = 1;
+			} else {
+				/* Clear Session Request */
+				gotgctl = dwc2_readl(hsotg, GOTGCTL);
+				gotgctl &= ~GOTGCTL_SESREQ;
+				dwc2_writel(hsotg, gotgctl, GOTGCTL);
+			}
+		}
+	}
+
+	if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) {
+		/*
+		 * Print statements during the HNP interrupt handling
+		 * can cause it to fail
+		 */
+		gotgctl = dwc2_readl(hsotg, GOTGCTL);
+		/*
+		 * WA for 3.00a- HW is not setting cur_mode, even sometimes
+		 * this does not help
+		 */
+		if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a)
+			udelay(100);
+		if (gotgctl & GOTGCTL_HSTNEGSCS) {
+			if (dwc2_is_host_mode(hsotg)) {
+				hsotg->op_state = OTG_STATE_B_HOST;
+				/*
+				 * Need to disable SOF interrupt immediately.
+				 * When switching from device to host, the PCD
+				 * interrupt handler won't handle the interrupt
+				 * if host mode is already set. The HCD
+				 * interrupt handler won't get called if the
+				 * HCD state is HALT. This means that the
+				 * interrupt does not get handled and Linux
+				 * complains loudly.
+				 */
+				gintmsk = dwc2_readl(hsotg, GINTMSK);
+				gintmsk &= ~GINTSTS_SOF;
+				dwc2_writel(hsotg, gintmsk, GINTMSK);
+
+				/*
+				 * Call callback function with spin lock
+				 * released
+				 */
+				spin_unlock(&hsotg->lock);
+
+				/* Initialize the Core for Host mode */
+				dwc2_hcd_start(hsotg);
+				spin_lock(&hsotg->lock);
+				hsotg->op_state = OTG_STATE_B_HOST;
+			}
+		} else {
+			gotgctl = dwc2_readl(hsotg, GOTGCTL);
+			gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN);
+			dwc2_writel(hsotg, gotgctl, GOTGCTL);
+			dev_dbg(hsotg->dev, "HNP Failed\n");
+			dev_err(hsotg->dev,
+				"Device Not Connected/Responding\n");
+		}
+	}
+
+	if (gotgint & GOTGINT_HST_NEG_DET) {
+		/*
+		 * The disconnect interrupt is set at the same time as
+		 * Host Negotiation Detected. During the mode switch all
+		 * interrupts are cleared so the disconnect interrupt
+		 * handler will not get executed.
+		 */
+		dev_dbg(hsotg->dev,
+			" ++OTG Interrupt: Host Negotiation Detected++ (%s)\n",
+			(dwc2_is_host_mode(hsotg) ? "Host" : "Device"));
+		if (dwc2_is_device_mode(hsotg)) {
+			dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n",
+				hsotg->op_state);
+			spin_unlock(&hsotg->lock);
+			dwc2_hcd_disconnect(hsotg, false);
+			spin_lock(&hsotg->lock);
+			hsotg->op_state = OTG_STATE_A_PERIPHERAL;
+		} else {
+			/* Need to disable SOF interrupt immediately */
+			gintmsk = dwc2_readl(hsotg, GINTMSK);
+			gintmsk &= ~GINTSTS_SOF;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+			spin_unlock(&hsotg->lock);
+			dwc2_hcd_start(hsotg);
+			spin_lock(&hsotg->lock);
+			hsotg->op_state = OTG_STATE_A_HOST;
+		}
+	}
+
+	if (gotgint & GOTGINT_A_DEV_TOUT_CHG)
+		dev_dbg(hsotg->dev,
+			" ++OTG Interrupt: A-Device Timeout Change++\n");
+	if (gotgint & GOTGINT_DBNCE_DONE)
+		dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n");
+
+	/* Clear GOTGINT */
+	dwc2_writel(hsotg, gotgint, GOTGINT);
+}
+
+/**
+ * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status
+ * Change Interrupt
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a
+ * Device to Host Mode transition or a Host to Device Mode transition. This only
+ * occurs when the cable is connected/removed from the PHY connector.
+ */
+static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 gintmsk;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_CONIDSTSCHNG, GINTSTS);
+
+	/* Need to disable SOF interrupt immediately */
+	gintmsk = dwc2_readl(hsotg, GINTMSK);
+	gintmsk &= ~GINTSTS_SOF;
+	dwc2_writel(hsotg, gintmsk, GINTMSK);
+
+	dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++  (%s)\n",
+		dwc2_is_host_mode(hsotg) ? "Host" : "Device");
+
+	/*
+	 * Need to schedule a work, as there are possible DELAY function calls.
+	 */
+	if (hsotg->wq_otg)
+		queue_work(hsotg->wq_otg, &hsotg->wf_otg);
+}
+
+/**
+ * dwc2_handle_session_req_intr() - This interrupt indicates that a device is
+ * initiating the Session Request Protocol to request the host to turn on bus
+ * power so a new session can begin
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * This handler responds by turning on bus power. If the DWC_otg controller is
+ * in low power mode, this handler brings the controller out of low power mode
+ * before turning on bus power.
+ */
+static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
+{
+	int ret;
+	u32 hprt0;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_SESSREQINT, GINTSTS);
+
+	dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n",
+		hsotg->lx_state);
+
+	if (dwc2_is_device_mode(hsotg)) {
+		if (hsotg->lx_state != DWC2_L0) {
+			if (hsotg->in_ppd) {
+				ret = dwc2_exit_partial_power_down(hsotg, 0,
+								   true);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit power_down failed\n");
+			}
+
+			/* Exit gadget mode clock gating. */
+			if (hsotg->params.power_down ==
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended &&
+			    !hsotg->params.no_clock_gating)
+				dwc2_gadget_exit_clock_gating(hsotg, 0);
+		}
+
+		/*
+		 * Report disconnect if there is any previous session
+		 * established
+		 */
+		dwc2_hsotg_disconnect(hsotg);
+	} else {
+		/* Turn on the port power bit. */
+		hprt0 = dwc2_read_hprt0(hsotg);
+		hprt0 |= HPRT0_PWR;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+		/* Connect hcd after port power is set. */
+		dwc2_hcd_connect(hsotg);
+	}
+}
+
+/**
+ * dwc2_wakeup_from_lpm_l1 - Exit the device from LPM L1 state
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ */
+void dwc2_wakeup_from_lpm_l1(struct dwc2_hsotg *hsotg, bool remotewakeup)
+{
+	u32 glpmcfg;
+	u32 pcgctl;
+	u32 dctl;
+
+	if (hsotg->lx_state != DWC2_L1) {
+		dev_err(hsotg->dev, "Core isn't in DWC2_L1 state\n");
+		return;
+	}
+
+	glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+	if (dwc2_is_device_mode(hsotg)) {
+		dev_dbg(hsotg->dev, "Exit from L1 state, remotewakeup=%d\n", remotewakeup);
+		glpmcfg &= ~GLPMCFG_ENBLSLPM;
+		glpmcfg &= ~GLPMCFG_HIRD_THRES_MASK;
+		dwc2_writel(hsotg, glpmcfg, GLPMCFG);
+
+		pcgctl = dwc2_readl(hsotg, PCGCTL);
+		pcgctl &= ~PCGCTL_ENBL_SLEEP_GATING;
+		dwc2_writel(hsotg, pcgctl, PCGCTL);
+
+		glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+		if (glpmcfg & GLPMCFG_ENBESL) {
+			glpmcfg |= GLPMCFG_RSTRSLPSTS;
+			dwc2_writel(hsotg, glpmcfg, GLPMCFG);
+		}
+
+		if (remotewakeup) {
+			if (dwc2_hsotg_wait_bit_set(hsotg, GLPMCFG, GLPMCFG_L1RESUMEOK, 1000)) {
+				dev_warn(hsotg->dev, "%s: timeout GLPMCFG_L1RESUMEOK\n", __func__);
+				goto fail;
+				return;
+			}
+
+			dctl = dwc2_readl(hsotg, DCTL);
+			dctl |= DCTL_RMTWKUPSIG;
+			dwc2_writel(hsotg, dctl, DCTL);
+
+			if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, GINTSTS_WKUPINT, 1000)) {
+				dev_warn(hsotg->dev, "%s: timeout GINTSTS_WKUPINT\n", __func__);
+				goto fail;
+				return;
+			}
+		}
+
+		glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+		if (glpmcfg & GLPMCFG_COREL1RES_MASK || glpmcfg & GLPMCFG_SLPSTS ||
+		    glpmcfg & GLPMCFG_L1RESUMEOK) {
+			goto fail;
+			return;
+		}
+
+		/* Inform gadget to exit from L1 */
+		call_gadget(hsotg, resume);
+		/* Change to L0 state */
+		hsotg->lx_state = DWC2_L0;
+		hsotg->bus_suspended = false;
+fail:		dwc2_gadget_init_lpm(hsotg);
+	} else {
+		/* TODO */
+		dev_err(hsotg->dev, "Host side LPM is not supported.\n");
+		return;
+	}
+}
+
+/*
+ * This interrupt indicates that the DWC_otg controller has detected a
+ * resume or remote wakeup sequence. If the DWC_otg controller is in
+ * low power mode, the handler must brings the controller out of low
+ * power mode. The controller automatically begins resume signaling.
+ * The handler schedules a time to stop resume signaling.
+ */
+static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
+{
+	int ret;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_WKUPINT, GINTSTS);
+
+	dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n");
+	dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state);
+
+	if (hsotg->lx_state == DWC2_L1) {
+		dwc2_wakeup_from_lpm_l1(hsotg, false);
+		return;
+	}
+
+	if (dwc2_is_device_mode(hsotg)) {
+		dev_dbg(hsotg->dev, "DSTS=0x%0x\n",
+			dwc2_readl(hsotg, DSTS));
+		if (hsotg->lx_state == DWC2_L2) {
+			if (hsotg->in_ppd) {
+				u32 dctl = dwc2_readl(hsotg, DCTL);
+				/* Clear Remote Wakeup Signaling */
+				dctl &= ~DCTL_RMTWKUPSIG;
+				dwc2_writel(hsotg, dctl, DCTL);
+				ret = dwc2_exit_partial_power_down(hsotg, 1,
+								   true);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit partial_power_down failed\n");
+				call_gadget(hsotg, resume);
+			}
+
+			/* Exit gadget mode clock gating. */
+			if (hsotg->params.power_down ==
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended &&
+			    !hsotg->params.no_clock_gating)
+				dwc2_gadget_exit_clock_gating(hsotg, 0);
+		} else {
+			/* Change to L0 state */
+			hsotg->lx_state = DWC2_L0;
+		}
+	} else {
+		if (hsotg->lx_state == DWC2_L2) {
+			if (hsotg->in_ppd) {
+				ret = dwc2_exit_partial_power_down(hsotg, 1,
+								   true);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit partial_power_down failed\n");
+			}
+
+			if (hsotg->params.power_down ==
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended &&
+			    !hsotg->params.no_clock_gating)
+				dwc2_host_exit_clock_gating(hsotg, 1);
+
+			/*
+			 * If we've got this quirk then the PHY is stuck upon
+			 * wakeup.  Assert reset.  This will propagate out and
+			 * eventually we'll re-enumerate the device.  Not great
+			 * but the best we can do.  We can't call phy_reset()
+			 * at interrupt time but there's no hurry, so we'll
+			 * schedule it for later.
+			 */
+			if (hsotg->reset_phy_on_wake)
+				dwc2_host_schedule_phy_reset(hsotg);
+
+			mod_timer(&hsotg->wkp_timer,
+				  jiffies + msecs_to_jiffies(71));
+		} else {
+			/* Change to L0 state */
+			hsotg->lx_state = DWC2_L0;
+		}
+	}
+}
+
+/*
+ * This interrupt indicates that a device has been disconnected from the
+ * root port
+ */
+static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg)
+{
+	dwc2_writel(hsotg, GINTSTS_DISCONNINT, GINTSTS);
+
+	dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n",
+		dwc2_is_host_mode(hsotg) ? "Host" : "Device",
+		dwc2_op_state_str(hsotg));
+
+	if (hsotg->op_state == OTG_STATE_A_HOST)
+		dwc2_hcd_disconnect(hsotg, false);
+}
+
+/*
+ * This interrupt indicates that SUSPEND state has been detected on the USB.
+ *
+ * For HNP the USB Suspend interrupt signals the change from "a_peripheral"
+ * to "a_host".
+ *
+ * When power management is enabled the core will be put in low power mode.
+ */
+static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 dsts;
+	int ret;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_USBSUSP, GINTSTS);
+
+	dev_dbg(hsotg->dev, "USB SUSPEND\n");
+
+	if (dwc2_is_device_mode(hsotg)) {
+		/*
+		 * Check the Device status register to determine if the Suspend
+		 * state is active
+		 */
+		dsts = dwc2_readl(hsotg, DSTS);
+		dev_dbg(hsotg->dev, "%s: DSTS=0x%0x\n", __func__, dsts);
+		dev_dbg(hsotg->dev,
+			"DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d HWCFG4.Hibernation=%d\n",
+			!!(dsts & DSTS_SUSPSTS),
+			hsotg->hw_params.power_optimized,
+			hsotg->hw_params.hibernation);
+
+		/* Ignore suspend request before enumeration */
+		if (!dwc2_is_device_connected(hsotg)) {
+			dev_dbg(hsotg->dev,
+				"ignore suspend request before enumeration\n");
+			return;
+		}
+		if (dsts & DSTS_SUSPSTS) {
+			switch (hsotg->params.power_down) {
+			case DWC2_POWER_DOWN_PARAM_PARTIAL:
+				ret = dwc2_enter_partial_power_down(hsotg);
+				if (ret)
+					dev_err(hsotg->dev,
+						"enter partial_power_down failed\n");
+
+				udelay(100);
+
+				/* Ask phy to be suspended */
+				if (!IS_ERR_OR_NULL(hsotg->uphy))
+					usb_phy_set_suspend(hsotg->uphy, true);
+				break;
+			case DWC2_POWER_DOWN_PARAM_HIBERNATION:
+				ret = dwc2_enter_hibernation(hsotg, 0);
+				if (ret)
+					dev_err(hsotg->dev,
+						"enter hibernation failed\n");
+				break;
+			case DWC2_POWER_DOWN_PARAM_NONE:
+				/*
+				 * If neither hibernation nor partial power down are supported,
+				 * clock gating is used to save power.
+				 */
+				if (!hsotg->params.no_clock_gating)
+					dwc2_gadget_enter_clock_gating(hsotg);
+			}
+
+			/*
+			 * Change to L2 (suspend) state before releasing
+			 * spinlock
+			 */
+			hsotg->lx_state = DWC2_L2;
+
+			/* Call gadget suspend callback */
+			call_gadget(hsotg, suspend);
+		}
+	} else {
+		if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) {
+			dev_dbg(hsotg->dev, "a_peripheral->a_host\n");
+
+			/* Change to L2 (suspend) state */
+			hsotg->lx_state = DWC2_L2;
+			/* Clear the a_peripheral flag, back to a_host */
+			spin_unlock(&hsotg->lock);
+			dwc2_hcd_start(hsotg);
+			spin_lock(&hsotg->lock);
+			hsotg->op_state = OTG_STATE_A_HOST;
+		}
+	}
+}
+
+/**
+ * dwc2_handle_lpm_intr - GINTSTS_LPMTRANRCVD Interrupt handler
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ */
+static void dwc2_handle_lpm_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 glpmcfg;
+	u32 pcgcctl;
+	u32 hird;
+	u32 hird_thres;
+	u32 hird_thres_en;
+	u32 enslpm;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_LPMTRANRCVD, GINTSTS);
+
+	glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+
+	if (!(glpmcfg & GLPMCFG_LPMCAP)) {
+		dev_err(hsotg->dev, "Unexpected LPM interrupt\n");
+		return;
+	}
+
+	hird = (glpmcfg & GLPMCFG_HIRD_MASK) >> GLPMCFG_HIRD_SHIFT;
+	hird_thres = (glpmcfg & GLPMCFG_HIRD_THRES_MASK &
+			~GLPMCFG_HIRD_THRES_EN) >> GLPMCFG_HIRD_THRES_SHIFT;
+	hird_thres_en = glpmcfg & GLPMCFG_HIRD_THRES_EN;
+	enslpm = glpmcfg & GLPMCFG_ENBLSLPM;
+
+	if (dwc2_is_device_mode(hsotg)) {
+		dev_dbg(hsotg->dev, "HIRD_THRES_EN = %d\n", hird_thres_en);
+
+		if (hird_thres_en && hird >= hird_thres) {
+			dev_dbg(hsotg->dev, "L1 with utmi_l1_suspend_n\n");
+		} else if (enslpm) {
+			dev_dbg(hsotg->dev, "L1 with utmi_sleep_n\n");
+		} else {
+			dev_dbg(hsotg->dev, "Entering Sleep with L1 Gating\n");
+
+			pcgcctl = dwc2_readl(hsotg, PCGCTL);
+			pcgcctl |= PCGCTL_ENBL_SLEEP_GATING;
+			dwc2_writel(hsotg, pcgcctl, PCGCTL);
+		}
+		/**
+		 * Examine prt_sleep_sts after TL1TokenTetry period max (10 us)
+		 */
+		udelay(10);
+
+		glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+
+		if (glpmcfg & GLPMCFG_SLPSTS) {
+			/* Save the current state */
+			hsotg->lx_state = DWC2_L1;
+			dev_dbg(hsotg->dev,
+				"Core is in L1 sleep glpmcfg=%08x\n", glpmcfg);
+
+			/* Inform gadget that we are in L1 state */
+			call_gadget(hsotg, suspend);
+		}
+	}
+}
+
+#define GINTMSK_COMMON	(GINTSTS_WKUPINT | GINTSTS_SESSREQINT |		\
+			 GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT |	\
+			 GINTSTS_MODEMIS | GINTSTS_DISCONNINT |		\
+			 GINTSTS_USBSUSP | GINTSTS_PRTINT |		\
+			 GINTSTS_LPMTRANRCVD)
+
+/*
+ * This function returns the Core Interrupt register
+ */
+static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 gintsts;
+	u32 gintmsk;
+	u32 gahbcfg;
+	u32 gintmsk_common = GINTMSK_COMMON;
+
+	gintsts = dwc2_readl(hsotg, GINTSTS);
+	gintmsk = dwc2_readl(hsotg, GINTMSK);
+	gahbcfg = dwc2_readl(hsotg, GAHBCFG);
+
+	/* If any common interrupts set */
+	if (gintsts & gintmsk_common)
+		dev_dbg(hsotg->dev, "gintsts=%08x  gintmsk=%08x\n",
+			gintsts, gintmsk);
+
+	if (gahbcfg & GAHBCFG_GLBL_INTR_EN)
+		return gintsts & gintmsk & gintmsk_common;
+	else
+		return 0;
+}
+
+/**
+ * dwc_handle_gpwrdn_disc_det() - Handles the gpwrdn disconnect detect.
+ * Exits hibernation without restoring registers.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @gpwrdn: GPWRDN register
+ */
+static inline void dwc_handle_gpwrdn_disc_det(struct dwc2_hsotg *hsotg,
+					      u32 gpwrdn)
+{
+	u32 gpwrdn_tmp;
+
+	/* Switch-on voltage to the core */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PWRDNSWTCH;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+	udelay(5);
+
+	/* Reset core */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PWRDNRSTN;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+	udelay(5);
+
+	/* Disable Power Down Clamp */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PWRDNCLMP;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+	udelay(5);
+
+	/* Deassert reset core */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp |= GPWRDN_PWRDNRSTN;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+	udelay(5);
+
+	/* Disable PMU interrupt */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PMUINTSEL;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+
+	/* Reset ULPI latch */
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn &= ~GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY;
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+
+	/* De-assert Wakeup Logic */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PMUACTV;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+
+	hsotg->hibernated = 0;
+	hsotg->bus_suspended = 0;
+
+	if (gpwrdn & GPWRDN_IDSTS) {
+		hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+		dwc2_core_init(hsotg, false);
+		dwc2_enable_global_interrupts(hsotg);
+		dwc2_hsotg_core_init_disconnected(hsotg, false);
+		dwc2_hsotg_core_connect(hsotg);
+	} else {
+		hsotg->op_state = OTG_STATE_A_HOST;
+
+		/* Initialize the Core for Host mode */
+		dwc2_core_init(hsotg, false);
+		dwc2_enable_global_interrupts(hsotg);
+		dwc2_hcd_start(hsotg);
+	}
+}
+
+/*
+ * GPWRDN interrupt handler.
+ *
+ * The GPWRDN interrupts are those that occur in both Host and
+ * Device mode while core is in hibernated state.
+ */
+static int dwc2_handle_gpwrdn_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 gpwrdn;
+	int linestate;
+	int ret = 0;
+
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	/* clear all interrupt */
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	linestate = (gpwrdn & GPWRDN_LINESTATE_MASK) >> GPWRDN_LINESTATE_SHIFT;
+	dev_dbg(hsotg->dev,
+		"%s: dwc2_handle_gpwrdwn_intr called gpwrdn= %08x\n", __func__,
+		gpwrdn);
+
+	if ((gpwrdn & GPWRDN_DISCONN_DET) &&
+	    (gpwrdn & GPWRDN_DISCONN_DET_MSK) && !linestate) {
+		dev_dbg(hsotg->dev, "%s: GPWRDN_DISCONN_DET\n", __func__);
+		/*
+		 * Call disconnect detect function to exit from
+		 * hibernation
+		 */
+		dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn);
+	} else if ((gpwrdn & GPWRDN_LNSTSCHG) &&
+		   (gpwrdn & GPWRDN_LNSTSCHG_MSK) && linestate) {
+		dev_dbg(hsotg->dev, "%s: GPWRDN_LNSTSCHG\n", __func__);
+		if (hsotg->hw_params.hibernation &&
+		    hsotg->hibernated) {
+			if (gpwrdn & GPWRDN_IDSTS) {
+				ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit hibernation failed.\n");
+				call_gadget(hsotg, resume);
+			} else {
+				ret = dwc2_exit_hibernation(hsotg, 1, 0, 1);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit hibernation failed.\n");
+			}
+		}
+	} else if ((gpwrdn & GPWRDN_RST_DET) &&
+		   (gpwrdn & GPWRDN_RST_DET_MSK)) {
+		dev_dbg(hsotg->dev, "%s: GPWRDN_RST_DET\n", __func__);
+		if (!linestate) {
+			ret = dwc2_exit_hibernation(hsotg, 0, 1, 0);
+			if (ret)
+				dev_err(hsotg->dev,
+					"exit hibernation failed.\n");
+		}
+	} else if ((gpwrdn & GPWRDN_STS_CHGINT) &&
+		   (gpwrdn & GPWRDN_STS_CHGINT_MSK)) {
+		dev_dbg(hsotg->dev, "%s: GPWRDN_STS_CHGINT\n", __func__);
+		/*
+		 * As GPWRDN_STS_CHGINT exit from hibernation flow is
+		 * the same as in GPWRDN_DISCONN_DET flow. Call
+		 * disconnect detect helper function to exit from
+		 * hibernation.
+		 */
+		dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn);
+	}
+
+	return ret;
+}
+
+/*
+ * Common interrupt handler
+ *
+ * The common interrupts are those that occur in both Host and Device mode.
+ * This handler handles the following interrupts:
+ * - Mode Mismatch Interrupt
+ * - OTG Interrupt
+ * - Connector ID Status Change Interrupt
+ * - Disconnect Interrupt
+ * - Session Request Interrupt
+ * - Resume / Remote Wakeup Detected Interrupt
+ * - Suspend Interrupt
+ */
+irqreturn_t dwc2_handle_common_intr(int irq, void *dev)
+{
+	struct dwc2_hsotg *hsotg = dev;
+	u32 gintsts;
+	irqreturn_t retval = IRQ_NONE;
+
+	spin_lock(&hsotg->lock);
+
+	if (!dwc2_is_controller_alive(hsotg)) {
+		dev_warn(hsotg->dev, "Controller is dead\n");
+		goto out;
+	}
+
+	/* Reading current frame number value in device or host modes. */
+	if (dwc2_is_device_mode(hsotg))
+		hsotg->frame_number = (dwc2_readl(hsotg, DSTS)
+				       & DSTS_SOFFN_MASK) >> DSTS_SOFFN_SHIFT;
+	else
+		hsotg->frame_number = (dwc2_readl(hsotg, HFNUM)
+				       & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;
+
+	gintsts = dwc2_read_common_intr(hsotg);
+	if (gintsts & ~GINTSTS_PRTINT)
+		retval = IRQ_HANDLED;
+
+	/* In case of hibernated state gintsts must not work */
+	if (hsotg->hibernated) {
+		dwc2_handle_gpwrdn_intr(hsotg);
+		retval = IRQ_HANDLED;
+		goto out;
+	}
+
+	if (gintsts & GINTSTS_MODEMIS)
+		dwc2_handle_mode_mismatch_intr(hsotg);
+	if (gintsts & GINTSTS_OTGINT)
+		dwc2_handle_otg_intr(hsotg);
+	if (gintsts & GINTSTS_CONIDSTSCHNG)
+		dwc2_handle_conn_id_status_change_intr(hsotg);
+	if (gintsts & GINTSTS_DISCONNINT)
+		dwc2_handle_disconnect_intr(hsotg);
+	if (gintsts & GINTSTS_SESSREQINT)
+		dwc2_handle_session_req_intr(hsotg);
+	if (gintsts & GINTSTS_WKUPINT)
+		dwc2_handle_wakeup_detected_intr(hsotg);
+	if (gintsts & GINTSTS_USBSUSP)
+		dwc2_handle_usb_suspend_intr(hsotg);
+	if (gintsts & GINTSTS_LPMTRANRCVD)
+		dwc2_handle_lpm_intr(hsotg);
+
+	if (gintsts & GINTSTS_PRTINT) {
+		/*
+		 * The port interrupt occurs while in device mode with HPRT0
+		 * Port Enable/Disable
+		 */
+		if (dwc2_is_device_mode(hsotg)) {
+			dev_dbg(hsotg->dev,
+				" --Port interrupt received in Device mode--\n");
+			dwc2_handle_usb_port_intr(hsotg);
+			retval = IRQ_HANDLED;
+		}
+	}
+
+out:
+	spin_unlock(&hsotg->lock);
+	return retval;
+}

linux-7.2.3/drivers/usb/dwc2/debug.h

@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * debug.h - Designware USB2 DRD controller debug header
+ *
+ * Copyright (C) 2015 Intel Corporation
+ * Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
+ */
+
+#include "core.h"
+
+#ifdef CONFIG_DEBUG_FS
+int dwc2_debugfs_init(struct dwc2_hsotg *hsotg);
+void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg);
+#else
+static inline int dwc2_debugfs_init(struct dwc2_hsotg *hsotg)
+{  return 0;  }
+static inline void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg)
+{  }
+#endif

linux-7.2.3/drivers/usb/dwc2/debugfs.c

@@ -0,0 +1,813 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * debugfs.c - Designware USB2 DRD controller debugfs
+ *
+ * Copyright (C) 2015 Intel Corporation
+ * Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
+ */
+
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+
+#include "core.h"
+#include "debug.h"
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+
+/**
+ * testmode_write() - change usb test mode state.
+ * @file: The  file to write to.
+ * @ubuf: The buffer where user wrote.
+ * @count: The ubuf size.
+ * @ppos: Unused parameter.
+ */
+static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t
+		count, loff_t *ppos)
+{
+	struct seq_file		*s = file->private_data;
+	struct dwc2_hsotg	*hsotg = s->private;
+	unsigned long		flags;
+	u32			testmode = 0;
+	char			buf[32];
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	if (!strncmp(buf, "test_j", 6))
+		testmode = USB_TEST_J;
+	else if (!strncmp(buf, "test_k", 6))
+		testmode = USB_TEST_K;
+	else if (!strncmp(buf, "test_se0_nak", 12))
+		testmode = USB_TEST_SE0_NAK;
+	else if (!strncmp(buf, "test_packet", 11))
+		testmode = USB_TEST_PACKET;
+	else if (!strncmp(buf, "test_force_enable", 17))
+		testmode = USB_TEST_FORCE_ENABLE;
+	else
+		testmode = 0;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	dwc2_hsotg_set_test_mode(hsotg, testmode);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return count;
+}
+
+/**
+ * testmode_show() - debugfs: show usb test mode state
+ * @s: The seq file to write to.
+ * @unused: Unused parameter.
+ *
+ * This debugfs entry shows which usb test mode is currently enabled.
+ */
+static int testmode_show(struct seq_file *s, void *unused)
+{
+	struct dwc2_hsotg *hsotg = s->private;
+	unsigned long flags;
+	int dctl;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	dctl = dwc2_readl(hsotg, DCTL);
+	dctl &= DCTL_TSTCTL_MASK;
+	dctl >>= DCTL_TSTCTL_SHIFT;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	switch (dctl) {
+	case 0:
+		seq_puts(s, "no test\n");
+		break;
+	case USB_TEST_J:
+		seq_puts(s, "test_j\n");
+		break;
+	case USB_TEST_K:
+		seq_puts(s, "test_k\n");
+		break;
+	case USB_TEST_SE0_NAK:
+		seq_puts(s, "test_se0_nak\n");
+		break;
+	case USB_TEST_PACKET:
+		seq_puts(s, "test_packet\n");
+		break;
+	case USB_TEST_FORCE_ENABLE:
+		seq_puts(s, "test_force_enable\n");
+		break;
+	default:
+		seq_printf(s, "UNKNOWN %d\n", dctl);
+	}
+
+	return 0;
+}
+
+static int testmode_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, testmode_show, inode->i_private);
+}
+
+static const struct file_operations testmode_fops = {
+	.owner		= THIS_MODULE,
+	.open		= testmode_open,
+	.write		= testmode_write,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/**
+ * state_show - debugfs: show overall driver and device state.
+ * @seq: The seq file to write to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the overall state of the hardware and
+ * some general information about each of the endpoints available
+ * to the system.
+ */
+static int state_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg *hsotg = seq->private;
+	int idx;
+
+	seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
+		   dwc2_readl(hsotg, DCFG),
+		 dwc2_readl(hsotg, DCTL),
+		 dwc2_readl(hsotg, DSTS));
+
+	seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
+		   dwc2_readl(hsotg, DIEPMSK), dwc2_readl(hsotg, DOEPMSK));
+
+	seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
+		   dwc2_readl(hsotg, GINTMSK),
+		   dwc2_readl(hsotg, GINTSTS));
+
+	seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
+		   dwc2_readl(hsotg, DAINTMSK),
+		   dwc2_readl(hsotg, DAINT));
+
+	seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
+		   dwc2_readl(hsotg, GNPTXSTS),
+		   dwc2_readl(hsotg, GRXSTSR));
+
+	seq_puts(seq, "\nEndpoint status:\n");
+
+	for (idx = 0; idx < hsotg->num_of_eps; idx++) {
+		u32 in, out;
+
+		in = dwc2_readl(hsotg, DIEPCTL(idx));
+		out = dwc2_readl(hsotg, DOEPCTL(idx));
+
+		seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
+			   idx, in, out);
+
+		in = dwc2_readl(hsotg, DIEPTSIZ(idx));
+		out = dwc2_readl(hsotg, DOEPTSIZ(idx));
+
+		seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
+			   in, out);
+
+		seq_puts(seq, "\n");
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(state);
+
+/**
+ * fifo_show - debugfs: show the fifo information
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * Show the FIFO information for the overall fifo and all the
+ * periodic transmission FIFOs.
+ */
+static int fifo_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg *hsotg = seq->private;
+	int fifo_count = dwc2_hsotg_tx_fifo_count(hsotg);
+	u32 val;
+	int idx;
+
+	seq_puts(seq, "Non-periodic FIFOs:\n");
+	seq_printf(seq, "RXFIFO: Size %d\n", dwc2_readl(hsotg, GRXFSIZ));
+
+	val = dwc2_readl(hsotg, GNPTXFSIZ);
+	seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
+		   val >> FIFOSIZE_DEPTH_SHIFT,
+		   val & FIFOSIZE_STARTADDR_MASK);
+
+	seq_puts(seq, "\nPeriodic TXFIFOs:\n");
+
+	for (idx = 1; idx <= fifo_count; idx++) {
+		val = dwc2_readl(hsotg, DPTXFSIZN(idx));
+
+		seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
+			   val >> FIFOSIZE_DEPTH_SHIFT,
+			   val & FIFOSIZE_STARTADDR_MASK);
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(fifo);
+
+static const char *decode_direction(int is_in)
+{
+	return is_in ? "in" : "out";
+}
+
+/**
+ * ep_show - debugfs: show the state of an endpoint.
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the state of the given endpoint (one is
+ * registered for each available).
+ */
+static int ep_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg_ep *ep = seq->private;
+	struct dwc2_hsotg *hsotg = ep->parent;
+	struct dwc2_hsotg_req *req;
+	int index = ep->index;
+	int show_limit = 15;
+	unsigned long flags;
+
+	seq_printf(seq, "Endpoint index %d, named %s,  dir %s:\n",
+		   ep->index, ep->ep.name, decode_direction(ep->dir_in));
+
+	/* first show the register state */
+
+	seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
+		   dwc2_readl(hsotg, DIEPCTL(index)),
+		   dwc2_readl(hsotg, DOEPCTL(index)));
+
+	seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
+		   dwc2_readl(hsotg, DIEPDMA(index)),
+		   dwc2_readl(hsotg, DOEPDMA(index)));
+
+	seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
+		   dwc2_readl(hsotg, DIEPINT(index)),
+		   dwc2_readl(hsotg, DOEPINT(index)));
+
+	seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
+		   dwc2_readl(hsotg, DIEPTSIZ(index)),
+		   dwc2_readl(hsotg, DOEPTSIZ(index)));
+
+	seq_puts(seq, "\n");
+	seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
+	seq_printf(seq, "total_data=%ld\n", ep->total_data);
+
+	seq_printf(seq, "request list (%p,%p):\n",
+		   ep->queue.next, ep->queue.prev);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (--show_limit < 0) {
+			seq_puts(seq, "not showing more requests...\n");
+			break;
+		}
+
+		seq_printf(seq, "%c req %p: %d bytes @%p, ",
+			   req == ep->req ? '*' : ' ',
+			   req, req->req.length, req->req.buf);
+		seq_printf(seq, "%d done, res %d\n",
+			   req->req.actual, req->req.status);
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(ep);
+
+/**
+ * dwc2_hsotg_create_debug - create debugfs directory and files
+ * @hsotg: The driver state
+ *
+ * Create the debugfs files to allow the user to get information
+ * about the state of the system. The directory name is created
+ * with the same name as the device itself, in case we end up
+ * with multiple blocks in future systems.
+ */
+static void dwc2_hsotg_create_debug(struct dwc2_hsotg *hsotg)
+{
+	struct dentry *root;
+	unsigned int epidx;
+
+	root = hsotg->debug_root;
+
+	/* create general state file */
+	debugfs_create_file("state", 0444, root, hsotg, &state_fops);
+	debugfs_create_file("testmode", 0644, root, hsotg, &testmode_fops);
+	debugfs_create_file("fifo", 0444, root, hsotg, &fifo_fops);
+
+	/* Create one file for each out endpoint */
+	for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) {
+		struct dwc2_hsotg_ep *ep;
+
+		ep = hsotg->eps_out[epidx];
+		if (ep)
+			debugfs_create_file(ep->name, 0444, root, ep, &ep_fops);
+	}
+	/* Create one file for each in endpoint. EP0 is handled with out eps */
+	for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) {
+		struct dwc2_hsotg_ep *ep;
+
+		ep = hsotg->eps_in[epidx];
+		if (ep)
+			debugfs_create_file(ep->name, 0444, root, ep, &ep_fops);
+	}
+}
+#else
+static inline void dwc2_hsotg_create_debug(struct dwc2_hsotg *hsotg) {}
+#endif
+
+/* dwc2_hsotg_delete_debug is removed as cleanup in done in dwc2_debugfs_exit */
+
+#define dump_register(nm)	\
+{				\
+	.name	= #nm,		\
+	.offset	= nm,		\
+}
+
+static const struct debugfs_reg32 dwc2_regs[] = {
+	/*
+	 * Accessing registers like this can trigger mode mismatch interrupt.
+	 * However, according to dwc2 databook, the register access, in this
+	 * case, is completed on the processor bus but is ignored by the core
+	 * and does not affect its operation.
+	 */
+	dump_register(GOTGCTL),
+	dump_register(GOTGINT),
+	dump_register(GAHBCFG),
+	dump_register(GUSBCFG),
+	dump_register(GRSTCTL),
+	dump_register(GINTSTS),
+	dump_register(GINTMSK),
+	dump_register(GRXSTSR),
+	/* Omit GRXSTSP */
+	dump_register(GRXFSIZ),
+	dump_register(GNPTXFSIZ),
+	dump_register(GNPTXSTS),
+	dump_register(GI2CCTL),
+	dump_register(GPVNDCTL),
+	dump_register(GGPIO),
+	dump_register(GUID),
+	dump_register(GSNPSID),
+	dump_register(GHWCFG1),
+	dump_register(GHWCFG2),
+	dump_register(GHWCFG3),
+	dump_register(GHWCFG4),
+	dump_register(GLPMCFG),
+	dump_register(GPWRDN),
+	dump_register(GDFIFOCFG),
+	dump_register(ADPCTL),
+	dump_register(HPTXFSIZ),
+	dump_register(DPTXFSIZN(1)),
+	dump_register(DPTXFSIZN(2)),
+	dump_register(DPTXFSIZN(3)),
+	dump_register(DPTXFSIZN(4)),
+	dump_register(DPTXFSIZN(5)),
+	dump_register(DPTXFSIZN(6)),
+	dump_register(DPTXFSIZN(7)),
+	dump_register(DPTXFSIZN(8)),
+	dump_register(DPTXFSIZN(9)),
+	dump_register(DPTXFSIZN(10)),
+	dump_register(DPTXFSIZN(11)),
+	dump_register(DPTXFSIZN(12)),
+	dump_register(DPTXFSIZN(13)),
+	dump_register(DPTXFSIZN(14)),
+	dump_register(DPTXFSIZN(15)),
+	dump_register(DCFG),
+	dump_register(DCTL),
+	dump_register(DSTS),
+	dump_register(DIEPMSK),
+	dump_register(DOEPMSK),
+	dump_register(DAINT),
+	dump_register(DAINTMSK),
+	dump_register(DTKNQR1),
+	dump_register(DTKNQR2),
+	dump_register(DTKNQR3),
+	dump_register(DTKNQR4),
+	dump_register(DVBUSDIS),
+	dump_register(DVBUSPULSE),
+	dump_register(DIEPCTL(0)),
+	dump_register(DIEPCTL(1)),
+	dump_register(DIEPCTL(2)),
+	dump_register(DIEPCTL(3)),
+	dump_register(DIEPCTL(4)),
+	dump_register(DIEPCTL(5)),
+	dump_register(DIEPCTL(6)),
+	dump_register(DIEPCTL(7)),
+	dump_register(DIEPCTL(8)),
+	dump_register(DIEPCTL(9)),
+	dump_register(DIEPCTL(10)),
+	dump_register(DIEPCTL(11)),
+	dump_register(DIEPCTL(12)),
+	dump_register(DIEPCTL(13)),
+	dump_register(DIEPCTL(14)),
+	dump_register(DIEPCTL(15)),
+	dump_register(DOEPCTL(0)),
+	dump_register(DOEPCTL(1)),
+	dump_register(DOEPCTL(2)),
+	dump_register(DOEPCTL(3)),
+	dump_register(DOEPCTL(4)),
+	dump_register(DOEPCTL(5)),
+	dump_register(DOEPCTL(6)),
+	dump_register(DOEPCTL(7)),
+	dump_register(DOEPCTL(8)),
+	dump_register(DOEPCTL(9)),
+	dump_register(DOEPCTL(10)),
+	dump_register(DOEPCTL(11)),
+	dump_register(DOEPCTL(12)),
+	dump_register(DOEPCTL(13)),
+	dump_register(DOEPCTL(14)),
+	dump_register(DOEPCTL(15)),
+	dump_register(DIEPINT(0)),
+	dump_register(DIEPINT(1)),
+	dump_register(DIEPINT(2)),
+	dump_register(DIEPINT(3)),
+	dump_register(DIEPINT(4)),
+	dump_register(DIEPINT(5)),
+	dump_register(DIEPINT(6)),
+	dump_register(DIEPINT(7)),
+	dump_register(DIEPINT(8)),
+	dump_register(DIEPINT(9)),
+	dump_register(DIEPINT(10)),
+	dump_register(DIEPINT(11)),
+	dump_register(DIEPINT(12)),
+	dump_register(DIEPINT(13)),
+	dump_register(DIEPINT(14)),
+	dump_register(DIEPINT(15)),
+	dump_register(DOEPINT(0)),
+	dump_register(DOEPINT(1)),
+	dump_register(DOEPINT(2)),
+	dump_register(DOEPINT(3)),
+	dump_register(DOEPINT(4)),
+	dump_register(DOEPINT(5)),
+	dump_register(DOEPINT(6)),
+	dump_register(DOEPINT(7)),
+	dump_register(DOEPINT(8)),
+	dump_register(DOEPINT(9)),
+	dump_register(DOEPINT(10)),
+	dump_register(DOEPINT(11)),
+	dump_register(DOEPINT(12)),
+	dump_register(DOEPINT(13)),
+	dump_register(DOEPINT(14)),
+	dump_register(DOEPINT(15)),
+	dump_register(DIEPTSIZ(0)),
+	dump_register(DIEPTSIZ(1)),
+	dump_register(DIEPTSIZ(2)),
+	dump_register(DIEPTSIZ(3)),
+	dump_register(DIEPTSIZ(4)),
+	dump_register(DIEPTSIZ(5)),
+	dump_register(DIEPTSIZ(6)),
+	dump_register(DIEPTSIZ(7)),
+	dump_register(DIEPTSIZ(8)),
+	dump_register(DIEPTSIZ(9)),
+	dump_register(DIEPTSIZ(10)),
+	dump_register(DIEPTSIZ(11)),
+	dump_register(DIEPTSIZ(12)),
+	dump_register(DIEPTSIZ(13)),
+	dump_register(DIEPTSIZ(14)),
+	dump_register(DIEPTSIZ(15)),
+	dump_register(DOEPTSIZ(0)),
+	dump_register(DOEPTSIZ(1)),
+	dump_register(DOEPTSIZ(2)),
+	dump_register(DOEPTSIZ(3)),
+	dump_register(DOEPTSIZ(4)),
+	dump_register(DOEPTSIZ(5)),
+	dump_register(DOEPTSIZ(6)),
+	dump_register(DOEPTSIZ(7)),
+	dump_register(DOEPTSIZ(8)),
+	dump_register(DOEPTSIZ(9)),
+	dump_register(DOEPTSIZ(10)),
+	dump_register(DOEPTSIZ(11)),
+	dump_register(DOEPTSIZ(12)),
+	dump_register(DOEPTSIZ(13)),
+	dump_register(DOEPTSIZ(14)),
+	dump_register(DOEPTSIZ(15)),
+	dump_register(DIEPDMA(0)),
+	dump_register(DIEPDMA(1)),
+	dump_register(DIEPDMA(2)),
+	dump_register(DIEPDMA(3)),
+	dump_register(DIEPDMA(4)),
+	dump_register(DIEPDMA(5)),
+	dump_register(DIEPDMA(6)),
+	dump_register(DIEPDMA(7)),
+	dump_register(DIEPDMA(8)),
+	dump_register(DIEPDMA(9)),
+	dump_register(DIEPDMA(10)),
+	dump_register(DIEPDMA(11)),
+	dump_register(DIEPDMA(12)),
+	dump_register(DIEPDMA(13)),
+	dump_register(DIEPDMA(14)),
+	dump_register(DIEPDMA(15)),
+	dump_register(DOEPDMA(0)),
+	dump_register(DOEPDMA(1)),
+	dump_register(DOEPDMA(2)),
+	dump_register(DOEPDMA(3)),
+	dump_register(DOEPDMA(4)),
+	dump_register(DOEPDMA(5)),
+	dump_register(DOEPDMA(6)),
+	dump_register(DOEPDMA(7)),
+	dump_register(DOEPDMA(8)),
+	dump_register(DOEPDMA(9)),
+	dump_register(DOEPDMA(10)),
+	dump_register(DOEPDMA(11)),
+	dump_register(DOEPDMA(12)),
+	dump_register(DOEPDMA(13)),
+	dump_register(DOEPDMA(14)),
+	dump_register(DOEPDMA(15)),
+	dump_register(DTXFSTS(0)),
+	dump_register(DTXFSTS(1)),
+	dump_register(DTXFSTS(2)),
+	dump_register(DTXFSTS(3)),
+	dump_register(DTXFSTS(4)),
+	dump_register(DTXFSTS(5)),
+	dump_register(DTXFSTS(6)),
+	dump_register(DTXFSTS(7)),
+	dump_register(DTXFSTS(8)),
+	dump_register(DTXFSTS(9)),
+	dump_register(DTXFSTS(10)),
+	dump_register(DTXFSTS(11)),
+	dump_register(DTXFSTS(12)),
+	dump_register(DTXFSTS(13)),
+	dump_register(DTXFSTS(14)),
+	dump_register(DTXFSTS(15)),
+	dump_register(PCGCTL),
+	dump_register(HCFG),
+	dump_register(HFIR),
+	dump_register(HFNUM),
+	dump_register(HPTXSTS),
+	dump_register(HAINT),
+	dump_register(HAINTMSK),
+	dump_register(HFLBADDR),
+	dump_register(HPRT0),
+	dump_register(HCCHAR(0)),
+	dump_register(HCCHAR(1)),
+	dump_register(HCCHAR(2)),
+	dump_register(HCCHAR(3)),
+	dump_register(HCCHAR(4)),
+	dump_register(HCCHAR(5)),
+	dump_register(HCCHAR(6)),
+	dump_register(HCCHAR(7)),
+	dump_register(HCCHAR(8)),
+	dump_register(HCCHAR(9)),
+	dump_register(HCCHAR(10)),
+	dump_register(HCCHAR(11)),
+	dump_register(HCCHAR(12)),
+	dump_register(HCCHAR(13)),
+	dump_register(HCCHAR(14)),
+	dump_register(HCCHAR(15)),
+	dump_register(HCSPLT(0)),
+	dump_register(HCSPLT(1)),
+	dump_register(HCSPLT(2)),
+	dump_register(HCSPLT(3)),
+	dump_register(HCSPLT(4)),
+	dump_register(HCSPLT(5)),
+	dump_register(HCSPLT(6)),
+	dump_register(HCSPLT(7)),
+	dump_register(HCSPLT(8)),
+	dump_register(HCSPLT(9)),
+	dump_register(HCSPLT(10)),
+	dump_register(HCSPLT(11)),
+	dump_register(HCSPLT(12)),
+	dump_register(HCSPLT(13)),
+	dump_register(HCSPLT(14)),
+	dump_register(HCSPLT(15)),
+	dump_register(HCINT(0)),
+	dump_register(HCINT(1)),
+	dump_register(HCINT(2)),
+	dump_register(HCINT(3)),
+	dump_register(HCINT(4)),
+	dump_register(HCINT(5)),
+	dump_register(HCINT(6)),
+	dump_register(HCINT(7)),
+	dump_register(HCINT(8)),
+	dump_register(HCINT(9)),
+	dump_register(HCINT(10)),
+	dump_register(HCINT(11)),
+	dump_register(HCINT(12)),
+	dump_register(HCINT(13)),
+	dump_register(HCINT(14)),
+	dump_register(HCINT(15)),
+	dump_register(HCINTMSK(0)),
+	dump_register(HCINTMSK(1)),
+	dump_register(HCINTMSK(2)),
+	dump_register(HCINTMSK(3)),
+	dump_register(HCINTMSK(4)),
+	dump_register(HCINTMSK(5)),
+	dump_register(HCINTMSK(6)),
+	dump_register(HCINTMSK(7)),
+	dump_register(HCINTMSK(8)),
+	dump_register(HCINTMSK(9)),
+	dump_register(HCINTMSK(10)),
+	dump_register(HCINTMSK(11)),
+	dump_register(HCINTMSK(12)),
+	dump_register(HCINTMSK(13)),
+	dump_register(HCINTMSK(14)),
+	dump_register(HCINTMSK(15)),
+	dump_register(HCTSIZ(0)),
+	dump_register(HCTSIZ(1)),
+	dump_register(HCTSIZ(2)),
+	dump_register(HCTSIZ(3)),
+	dump_register(HCTSIZ(4)),
+	dump_register(HCTSIZ(5)),
+	dump_register(HCTSIZ(6)),
+	dump_register(HCTSIZ(7)),
+	dump_register(HCTSIZ(8)),
+	dump_register(HCTSIZ(9)),
+	dump_register(HCTSIZ(10)),
+	dump_register(HCTSIZ(11)),
+	dump_register(HCTSIZ(12)),
+	dump_register(HCTSIZ(13)),
+	dump_register(HCTSIZ(14)),
+	dump_register(HCTSIZ(15)),
+	dump_register(HCDMA(0)),
+	dump_register(HCDMA(1)),
+	dump_register(HCDMA(2)),
+	dump_register(HCDMA(3)),
+	dump_register(HCDMA(4)),
+	dump_register(HCDMA(5)),
+	dump_register(HCDMA(6)),
+	dump_register(HCDMA(7)),
+	dump_register(HCDMA(8)),
+	dump_register(HCDMA(9)),
+	dump_register(HCDMA(10)),
+	dump_register(HCDMA(11)),
+	dump_register(HCDMA(12)),
+	dump_register(HCDMA(13)),
+	dump_register(HCDMA(14)),
+	dump_register(HCDMA(15)),
+	dump_register(HCDMAB(0)),
+	dump_register(HCDMAB(1)),
+	dump_register(HCDMAB(2)),
+	dump_register(HCDMAB(3)),
+	dump_register(HCDMAB(4)),
+	dump_register(HCDMAB(5)),
+	dump_register(HCDMAB(6)),
+	dump_register(HCDMAB(7)),
+	dump_register(HCDMAB(8)),
+	dump_register(HCDMAB(9)),
+	dump_register(HCDMAB(10)),
+	dump_register(HCDMAB(11)),
+	dump_register(HCDMAB(12)),
+	dump_register(HCDMAB(13)),
+	dump_register(HCDMAB(14)),
+	dump_register(HCDMAB(15)),
+};
+
+#define print_param(_seq, _ptr, _param) \
+seq_printf((_seq), "%-30s: %d\n", #_param, (_ptr)->_param)
+
+#define print_param_hex(_seq, _ptr, _param) \
+seq_printf((_seq), "%-30s: 0x%x\n", #_param, (_ptr)->_param)
+
+static int params_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg *hsotg = seq->private;
+	struct dwc2_core_params *p = &hsotg->params;
+	int i;
+
+	print_param(seq, p, otg_caps.hnp_support);
+	print_param(seq, p, otg_caps.srp_support);
+	print_param(seq, p, otg_caps.otg_rev);
+	print_param(seq, p, dma_desc_enable);
+	print_param(seq, p, dma_desc_fs_enable);
+	print_param(seq, p, speed);
+	print_param(seq, p, enable_dynamic_fifo);
+	print_param(seq, p, en_multiple_tx_fifo);
+	print_param(seq, p, host_rx_fifo_size);
+	print_param(seq, p, host_nperio_tx_fifo_size);
+	print_param(seq, p, host_perio_tx_fifo_size);
+	print_param(seq, p, max_transfer_size);
+	print_param(seq, p, max_packet_count);
+	print_param(seq, p, host_channels);
+	print_param(seq, p, phy_type);
+	print_param(seq, p, phy_utmi_width);
+	print_param(seq, p, eusb2_disc);
+	print_param(seq, p, phy_ulpi_ddr);
+	print_param(seq, p, phy_ulpi_ext_vbus);
+	print_param(seq, p, i2c_enable);
+	print_param(seq, p, ipg_isoc_en);
+	print_param(seq, p, ulpi_fs_ls);
+	print_param(seq, p, host_support_fs_ls_low_power);
+	print_param(seq, p, host_ls_low_power_phy_clk);
+	print_param(seq, p, activate_stm_fs_transceiver);
+	print_param(seq, p, activate_stm_id_vb_detection);
+	print_param(seq, p, ts_dline);
+	print_param(seq, p, reload_ctl);
+	print_param_hex(seq, p, ahbcfg);
+	print_param(seq, p, uframe_sched);
+	print_param(seq, p, external_id_pin_ctl);
+	print_param(seq, p, power_down);
+	print_param(seq, p, no_clock_gating);
+	print_param(seq, p, lpm);
+	print_param(seq, p, lpm_clock_gating);
+	print_param(seq, p, besl);
+	print_param(seq, p, hird_threshold_en);
+	print_param(seq, p, hird_threshold);
+	print_param(seq, p, service_interval);
+	print_param(seq, p, host_dma);
+	print_param(seq, p, g_dma);
+	print_param(seq, p, g_dma_desc);
+	print_param(seq, p, g_rx_fifo_size);
+	print_param(seq, p, g_np_tx_fifo_size);
+
+	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
+		char str[32];
+
+		snprintf(str, 32, "g_tx_fifo_size[%d]", i);
+		seq_printf(seq, "%-30s: %d\n", str, p->g_tx_fifo_size[i]);
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(params);
+
+static int hw_params_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg *hsotg = seq->private;
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+
+	print_param(seq, hw, op_mode);
+	print_param(seq, hw, arch);
+	print_param(seq, hw, dma_desc_enable);
+	print_param(seq, hw, enable_dynamic_fifo);
+	print_param(seq, hw, en_multiple_tx_fifo);
+	print_param(seq, hw, rx_fifo_size);
+	print_param(seq, hw, host_nperio_tx_fifo_size);
+	print_param(seq, hw, dev_nperio_tx_fifo_size);
+	print_param(seq, hw, host_perio_tx_fifo_size);
+	print_param(seq, hw, nperio_tx_q_depth);
+	print_param(seq, hw, host_perio_tx_q_depth);
+	print_param(seq, hw, dev_token_q_depth);
+	print_param(seq, hw, max_transfer_size);
+	print_param(seq, hw, max_packet_count);
+	print_param(seq, hw, host_channels);
+	print_param(seq, hw, hs_phy_type);
+	print_param(seq, hw, fs_phy_type);
+	print_param(seq, hw, i2c_enable);
+	print_param(seq, hw, num_dev_ep);
+	print_param(seq, hw, num_dev_perio_in_ep);
+	print_param(seq, hw, total_fifo_size);
+	print_param(seq, hw, power_optimized);
+	print_param(seq, hw, utmi_phy_data_width);
+	print_param_hex(seq, hw, snpsid);
+	print_param_hex(seq, hw, dev_ep_dirs);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(hw_params);
+
+static int dr_mode_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg *hsotg = seq->private;
+	const char *dr_mode = "";
+
+	device_property_read_string(hsotg->dev, "dr_mode", &dr_mode);
+	seq_printf(seq, "%s\n", dr_mode);
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(dr_mode);
+
+int dwc2_debugfs_init(struct dwc2_hsotg *hsotg)
+{
+	int			ret;
+	struct dentry		*root;
+
+	root = debugfs_create_dir(dev_name(hsotg->dev), usb_debug_root);
+	hsotg->debug_root = root;
+
+	debugfs_create_file("params", 0444, root, hsotg, &params_fops);
+	debugfs_create_file("hw_params", 0444, root, hsotg, &hw_params_fops);
+	debugfs_create_file("dr_mode", 0444, root, hsotg, &dr_mode_fops);
+
+	/* Add gadget debugfs nodes */
+	dwc2_hsotg_create_debug(hsotg);
+
+	hsotg->regset = devm_kzalloc(hsotg->dev, sizeof(*hsotg->regset),
+								GFP_KERNEL);
+	if (!hsotg->regset) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	hsotg->regset->regs = dwc2_regs;
+	hsotg->regset->nregs = ARRAY_SIZE(dwc2_regs);
+	hsotg->regset->base = hsotg->regs;
+
+	debugfs_create_regset32("regdump", 0444, root, hsotg->regset);
+
+	return 0;
+err:
+	debugfs_remove_recursive(hsotg->debug_root);
+	return ret;
+}
+
+void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg)
+{
+	debugfs_remove_recursive(hsotg->debug_root);
+	hsotg->debug_root = NULL;
+}

linux-7.2.3/drivers/usb/dwc2/drd.c

@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drd.c - DesignWare USB2 DRD Controller Dual-role support
+ *
+ * Copyright (C) 2020 STMicroelectronics
+ *
+ * Author(s): Amelie Delaunay <amelie.delaunay@st.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/platform_device.h>
+#include <linux/usb/role.h>
+#include "core.h"
+
+#define dwc2_ovr_gotgctl(gotgctl) \
+	((gotgctl) |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN | GOTGCTL_VBVALOEN | \
+	 GOTGCTL_DBNCE_FLTR_BYPASS)
+
+static void dwc2_ovr_init(struct dwc2_hsotg *hsotg)
+{
+	unsigned long flags;
+	u32 gotgctl;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	gotgctl = dwc2_readl(hsotg, GOTGCTL);
+	dwc2_ovr_gotgctl(gotgctl);
+	gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL);
+	if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST)
+		gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL;
+	else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL)
+		gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL;
+	dwc2_writel(hsotg, gotgctl, GOTGCTL);
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST) ||
+				(hsotg->role_sw_default_mode == USB_DR_MODE_HOST));
+}
+
+static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid)
+{
+	u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
+
+	/* Check if A-Session is already in the right state */
+	if ((valid && (gotgctl & GOTGCTL_ASESVLD)) ||
+	    (!valid && !(gotgctl & GOTGCTL_ASESVLD)))
+		return -EALREADY;
+
+	/* Always enable overrides to handle the resume case */
+	dwc2_ovr_gotgctl(gotgctl);
+
+	gotgctl &= ~GOTGCTL_BVALOVAL;
+	if (valid)
+		gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL;
+	else
+		gotgctl &= ~(GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL);
+	dwc2_writel(hsotg, gotgctl, GOTGCTL);
+
+	return 0;
+}
+
+static int dwc2_ovr_bvalid(struct dwc2_hsotg *hsotg, bool valid)
+{
+	u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
+
+	/* Check if B-Session is already in the right state */
+	if ((valid && (gotgctl & GOTGCTL_BSESVLD)) ||
+	    (!valid && !(gotgctl & GOTGCTL_BSESVLD)))
+		return -EALREADY;
+
+	/* Always enable overrides to handle the resume case */
+	dwc2_ovr_gotgctl(gotgctl);
+
+	gotgctl &= ~GOTGCTL_AVALOVAL;
+	if (valid)
+		gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL;
+	else
+		gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL);
+	dwc2_writel(hsotg, gotgctl, GOTGCTL);
+
+	return 0;
+}
+
+static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
+{
+	struct dwc2_hsotg *hsotg = usb_role_switch_get_drvdata(sw);
+	unsigned long flags;
+	int already = 0;
+
+	/* Skip session not in line with dr_mode */
+	if ((role == USB_ROLE_DEVICE && hsotg->dr_mode == USB_DR_MODE_HOST) ||
+	    (role == USB_ROLE_HOST && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
+		return -EINVAL;
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+	/* Skip session if core is in test mode */
+	if (role == USB_ROLE_NONE && hsotg->test_mode) {
+		dev_dbg(hsotg->dev, "Core is in test mode\n");
+		return -EBUSY;
+	}
+#endif
+
+	/*
+	 * In case of USB_DR_MODE_PERIPHERAL, clock is disabled at the end of
+	 * the probe and enabled on udc_start.
+	 * If role-switch set is called before the udc_start, we need to enable
+	 * the clock to read/write GOTGCTL and GUSBCFG registers to override
+	 * mode and sessions. It is the case if cable is plugged at boot.
+	 */
+	if (!hsotg->ll_hw_enabled && hsotg->clk) {
+		int ret = clk_prepare_enable(hsotg->clk);
+
+		if (ret)
+			return ret;
+	}
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	if (role == USB_ROLE_NONE) {
+		/* default operation mode when usb role is USB_ROLE_NONE */
+		if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST)
+			role = USB_ROLE_HOST;
+		else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL)
+			role = USB_ROLE_DEVICE;
+	}
+
+	if ((IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) ||
+	     IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)) &&
+	     dwc2_is_device_mode(hsotg) &&
+	     hsotg->lx_state == DWC2_L2 &&
+	     hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE &&
+	     hsotg->bus_suspended &&
+	     !hsotg->params.no_clock_gating)
+		dwc2_gadget_exit_clock_gating(hsotg, 0);
+
+	if (role == USB_ROLE_HOST) {
+		already = dwc2_ovr_avalid(hsotg, true);
+	} else if (role == USB_ROLE_DEVICE) {
+		already = dwc2_ovr_bvalid(hsotg, true);
+		if (dwc2_is_device_enabled(hsotg)) {
+			/* This clear DCTL.SFTDISCON bit */
+			dwc2_hsotg_core_connect(hsotg);
+		}
+	} else {
+		if (dwc2_is_device_mode(hsotg)) {
+			if (!dwc2_ovr_bvalid(hsotg, false))
+				/* This set DCTL.SFTDISCON bit */
+				dwc2_hsotg_core_disconnect(hsotg);
+		} else {
+			dwc2_ovr_avalid(hsotg, false);
+		}
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	if (!already && hsotg->dr_mode == USB_DR_MODE_OTG)
+		/* This will raise a Connector ID Status Change Interrupt */
+		dwc2_force_mode(hsotg, role == USB_ROLE_HOST);
+
+	if (!hsotg->ll_hw_enabled && hsotg->clk)
+		clk_disable_unprepare(hsotg->clk);
+
+	dev_dbg(hsotg->dev, "%s-session valid\n",
+		role == USB_ROLE_NONE ? "No" :
+		role == USB_ROLE_HOST ? "A" : "B");
+
+	return 0;
+}
+
+int dwc2_drd_init(struct dwc2_hsotg *hsotg)
+{
+	struct usb_role_switch_desc role_sw_desc = {0};
+	struct usb_role_switch *role_sw;
+	int ret;
+
+	if (!device_property_read_bool(hsotg->dev, "usb-role-switch"))
+		return 0;
+
+	hsotg->role_sw_default_mode = usb_get_role_switch_default_mode(hsotg->dev);
+	role_sw_desc.driver_data = hsotg;
+	role_sw_desc.fwnode = dev_fwnode(hsotg->dev);
+	role_sw_desc.set = dwc2_drd_role_sw_set;
+	role_sw_desc.allow_userspace_control = true;
+
+	role_sw = usb_role_switch_register(hsotg->dev, &role_sw_desc);
+	if (IS_ERR(role_sw)) {
+		ret = PTR_ERR(role_sw);
+		dev_err(hsotg->dev,
+			"failed to register role switch: %d\n", ret);
+		return ret;
+	}
+
+	hsotg->role_sw = role_sw;
+
+	/* Enable override and initialize values */
+	dwc2_ovr_init(hsotg);
+
+	return 0;
+}
+
+void dwc2_drd_suspend(struct dwc2_hsotg *hsotg)
+{
+	u32 gintsts, gintmsk;
+
+	if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) {
+		gintmsk = dwc2_readl(hsotg, GINTMSK);
+		gintmsk &= ~GINTSTS_CONIDSTSCHNG;
+		dwc2_writel(hsotg, gintmsk, GINTMSK);
+		gintsts = dwc2_readl(hsotg, GINTSTS);
+		dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS);
+	}
+}
+
+void dwc2_drd_resume(struct dwc2_hsotg *hsotg)
+{
+	u32 gintsts, gintmsk;
+	enum usb_role role;
+
+	if (hsotg->role_sw) {
+		/* get last known role (as the get ops isn't implemented by this driver) */
+		role = usb_role_switch_get_role(hsotg->role_sw);
+
+		if (role == USB_ROLE_NONE) {
+			if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST)
+				role = USB_ROLE_HOST;
+			else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL)
+				role = USB_ROLE_DEVICE;
+		}
+
+		/* restore last role that may have been lost */
+		if (role == USB_ROLE_HOST)
+			dwc2_ovr_avalid(hsotg, true);
+		else if (role == USB_ROLE_DEVICE)
+			dwc2_ovr_bvalid(hsotg, true);
+
+		dwc2_force_mode(hsotg, role == USB_ROLE_HOST);
+
+		dev_dbg(hsotg->dev, "resuming %s-session valid\n",
+			role == USB_ROLE_NONE ? "No" :
+			role == USB_ROLE_HOST ? "A" : "B");
+	}
+
+	if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) {
+		gintsts = dwc2_readl(hsotg, GINTSTS);
+		dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS);
+		gintmsk = dwc2_readl(hsotg, GINTMSK);
+		gintmsk |= GINTSTS_CONIDSTSCHNG;
+		dwc2_writel(hsotg, gintmsk, GINTMSK);
+	}
+}
+
+void dwc2_drd_exit(struct dwc2_hsotg *hsotg)
+{
+	if (hsotg->role_sw)
+		usb_role_switch_unregister(hsotg->role_sw);
+}

linux-7.2.3/drivers/usb/dwc2/hcd.h

@@ -0,0 +1,787 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * hcd.h - DesignWare HS OTG Controller host-mode declarations
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ */
+
+#ifndef __DWC2_HCD_H__
+#define __DWC2_HCD_H__
+
+/*
+ * This file contains the structures, constants, and interfaces for the
+ * Host Contoller Driver (HCD)
+ *
+ * The Host Controller Driver (HCD) is responsible for translating requests
+ * from the USB Driver into the appropriate actions on the DWC_otg controller.
+ * It isolates the USBD from the specifics of the controller by providing an
+ * API to the USBD.
+ */
+
+struct dwc2_qh;
+
+/**
+ * struct dwc2_host_chan - Software host channel descriptor
+ *
+ * @hc_num:             Host channel number, used for register address lookup
+ * @dev_addr:           Address of the device
+ * @ep_num:             Endpoint of the device
+ * @ep_is_in:           Endpoint direction
+ * @speed:              Device speed. One of the following values:
+ *                       - USB_SPEED_LOW
+ *                       - USB_SPEED_FULL
+ *                       - USB_SPEED_HIGH
+ * @ep_type:            Endpoint type. One of the following values:
+ *                       - USB_ENDPOINT_XFER_CONTROL: 0
+ *                       - USB_ENDPOINT_XFER_ISOC:    1
+ *                       - USB_ENDPOINT_XFER_BULK:    2
+ *                       - USB_ENDPOINT_XFER_INTR:    3
+ * @max_packet:         Max packet size in bytes
+ * @data_pid_start:     PID for initial transaction.
+ *                       0: DATA0
+ *                       1: DATA2
+ *                       2: DATA1
+ *                       3: MDATA (non-Control EP),
+ *                          SETUP (Control EP)
+ * @multi_count:        Number of additional periodic transactions per
+ *                      (micro)frame
+ * @xfer_buf:           Pointer to current transfer buffer position
+ * @xfer_dma:           DMA address of xfer_buf
+ * @align_buf:          In Buffer DMA mode this will be used if xfer_buf is not
+ *                      DWORD aligned
+ * @xfer_len:           Total number of bytes to transfer
+ * @xfer_count:         Number of bytes transferred so far
+ * @start_pkt_count:    Packet count at start of transfer
+ * @xfer_started:       True if the transfer has been started
+ * @do_ping:            True if a PING request should be issued on this channel
+ * @error_state:        True if the error count for this transaction is non-zero
+ * @halt_on_queue:      True if this channel should be halted the next time a
+ *                      request is queued for the channel. This is necessary in
+ *                      slave mode if no request queue space is available when
+ *                      an attempt is made to halt the channel.
+ * @halt_pending:       True if the host channel has been halted, but the core
+ *                      is not finished flushing queued requests
+ * @do_split:           Enable split for the channel
+ * @complete_split:     Enable complete split
+ * @hub_addr:           Address of high speed hub for the split
+ * @hub_port:           Port of the low/full speed device for the split
+ * @xact_pos:           Split transaction position. One of the following values:
+ *                       - DWC2_HCSPLT_XACTPOS_MID
+ *                       - DWC2_HCSPLT_XACTPOS_BEGIN
+ *                       - DWC2_HCSPLT_XACTPOS_END
+ *                       - DWC2_HCSPLT_XACTPOS_ALL
+ * @requests:           Number of requests issued for this channel since it was
+ *                      assigned to the current transfer (not counting PINGs)
+ * @schinfo:            Scheduling micro-frame bitmap
+ * @ntd:                Number of transfer descriptors for the transfer
+ * @halt_status:        Reason for halting the host channel
+ * @hcint:               Contents of the HCINT register when the interrupt came
+ * @qh:                 QH for the transfer being processed by this channel
+ * @hc_list_entry:      For linking to list of host channels
+ * @desc_list_addr:     Current QH's descriptor list DMA address
+ * @desc_list_sz:       Current QH's descriptor list size
+ * @split_order_list_entry: List entry for keeping track of the order of splits
+ *
+ * This structure represents the state of a single host channel when acting in
+ * host mode. It contains the data items needed to transfer packets to an
+ * endpoint via a host channel.
+ */
+struct dwc2_host_chan {
+	u8 hc_num;
+
+	unsigned dev_addr:7;
+	unsigned ep_num:4;
+	unsigned ep_is_in:1;
+	unsigned speed:4;
+	unsigned ep_type:2;
+	unsigned max_packet:11;
+	unsigned data_pid_start:2;
+#define DWC2_HC_PID_DATA0	TSIZ_SC_MC_PID_DATA0
+#define DWC2_HC_PID_DATA2	TSIZ_SC_MC_PID_DATA2
+#define DWC2_HC_PID_DATA1	TSIZ_SC_MC_PID_DATA1
+#define DWC2_HC_PID_MDATA	TSIZ_SC_MC_PID_MDATA
+#define DWC2_HC_PID_SETUP	TSIZ_SC_MC_PID_SETUP
+
+	unsigned multi_count:2;
+
+	u8 *xfer_buf;
+	dma_addr_t xfer_dma;
+	dma_addr_t align_buf;
+	u32 xfer_len;
+	u32 xfer_count;
+	u16 start_pkt_count;
+	u8 xfer_started;
+	u8 do_ping;
+	u8 error_state;
+	u8 halt_on_queue;
+	u8 halt_pending;
+	u8 do_split;
+	u8 complete_split;
+	u8 hub_addr;
+	u8 hub_port;
+	u8 xact_pos;
+#define DWC2_HCSPLT_XACTPOS_MID	HCSPLT_XACTPOS_MID
+#define DWC2_HCSPLT_XACTPOS_END	HCSPLT_XACTPOS_END
+#define DWC2_HCSPLT_XACTPOS_BEGIN HCSPLT_XACTPOS_BEGIN
+#define DWC2_HCSPLT_XACTPOS_ALL	HCSPLT_XACTPOS_ALL
+
+	u8 requests;
+	u8 schinfo;
+	u16 ntd;
+	enum dwc2_halt_status halt_status;
+	u32 hcint;
+	struct dwc2_qh *qh;
+	struct list_head hc_list_entry;
+	dma_addr_t desc_list_addr;
+	u32 desc_list_sz;
+	struct list_head split_order_list_entry;
+};
+
+struct dwc2_hcd_pipe_info {
+	u8 dev_addr;
+	u8 ep_num;
+	u8 pipe_type;
+	u8 pipe_dir;
+	u16 maxp;
+	u16 maxp_mult;
+};
+
+struct dwc2_hcd_iso_packet_desc {
+	u32 offset;
+	u32 length;
+	u32 actual_length;
+	u32 status;
+};
+
+struct dwc2_qtd;
+
+struct dwc2_hcd_urb {
+	void *priv;
+	struct dwc2_qtd *qtd;
+	void *buf;
+	dma_addr_t dma;
+	void *setup_packet;
+	dma_addr_t setup_dma;
+	u32 length;
+	u32 actual_length;
+	u32 status;
+	u32 error_count;
+	u32 packet_count;
+	u32 flags;
+	u16 interval;
+	struct dwc2_hcd_pipe_info pipe_info;
+	struct dwc2_hcd_iso_packet_desc iso_descs[];
+};
+
+/* Phases for control transfers */
+enum dwc2_control_phase {
+	DWC2_CONTROL_SETUP,
+	DWC2_CONTROL_DATA,
+	DWC2_CONTROL_STATUS,
+};
+
+/* Transaction types */
+enum dwc2_transaction_type {
+	DWC2_TRANSACTION_NONE,
+	DWC2_TRANSACTION_PERIODIC,
+	DWC2_TRANSACTION_NON_PERIODIC,
+	DWC2_TRANSACTION_ALL,
+};
+
+/* The number of elements per LS bitmap (per port on multi_tt) */
+#define DWC2_ELEMENTS_PER_LS_BITMAP	DIV_ROUND_UP(DWC2_LS_SCHEDULE_SLICES, \
+						     BITS_PER_LONG)
+
+/**
+ * struct dwc2_tt - dwc2 data associated with a usb_tt
+ *
+ * @refcount:           Number of Queue Heads (QHs) holding a reference.
+ * @usb_tt:             Pointer back to the official usb_tt.
+ * @periodic_bitmaps:   Bitmap for which parts of the 1ms frame are accounted
+ *                      for already.  Each is DWC2_ELEMENTS_PER_LS_BITMAP
+ *			elements (so sizeof(long) times that in bytes).
+ *
+ * This structure is stored in the hcpriv of the official usb_tt.
+ */
+struct dwc2_tt {
+	int refcount;
+	struct usb_tt *usb_tt;
+	unsigned long periodic_bitmaps[];
+};
+
+/**
+ * struct dwc2_hs_transfer_time - Info about a transfer on the high speed bus.
+ *
+ * @start_schedule_us:  The start time on the main bus schedule.  Note that
+ *                         the main bus schedule is tightly packed and this
+ *			   time should be interpreted as tightly packed (so
+ *			   uFrame 0 starts at 0 us, uFrame 1 starts at 100 us
+ *			   instead of 125 us).
+ * @duration_us:           How long this transfer goes.
+ */
+
+struct dwc2_hs_transfer_time {
+	u32 start_schedule_us;
+	u16 duration_us;
+};
+
+/**
+ * struct dwc2_qh - Software queue head structure
+ *
+ * @hsotg:              The HCD state structure for the DWC OTG controller
+ * @ep_type:            Endpoint type. One of the following values:
+ *                       - USB_ENDPOINT_XFER_CONTROL
+ *                       - USB_ENDPOINT_XFER_BULK
+ *                       - USB_ENDPOINT_XFER_INT
+ *                       - USB_ENDPOINT_XFER_ISOC
+ * @ep_is_in:           Endpoint direction
+ * @maxp:               Value from wMaxPacketSize field of Endpoint Descriptor
+ * @maxp_mult:          Multiplier for maxp
+ * @dev_speed:          Device speed. One of the following values:
+ *                       - USB_SPEED_LOW
+ *                       - USB_SPEED_FULL
+ *                       - USB_SPEED_HIGH
+ * @data_toggle:        Determines the PID of the next data packet for
+ *                      non-controltransfers. Ignored for control transfers.
+ *                      One of the following values:
+ *                       - DWC2_HC_PID_DATA0
+ *                       - DWC2_HC_PID_DATA1
+ * @ping_state:         Ping state
+ * @do_split:           Full/low speed endpoint on high-speed hub requires split
+ * @td_first:           Index of first activated isochronous transfer descriptor
+ * @td_last:            Index of last activated isochronous transfer descriptor
+ * @host_us:            Bandwidth in microseconds per transfer as seen by host
+ * @device_us:          Bandwidth in microseconds per transfer as seen by device
+ * @host_interval:      Interval between transfers as seen by the host.  If
+ *                      the host is high speed and the device is low speed this
+ *                      will be 8 times device interval.
+ * @device_interval:    Interval between transfers as seen by the device.
+ *                      interval.
+ * @next_active_frame:  (Micro)frame _before_ we next need to put something on
+ *                      the bus.  We'll move the qh to active here.  If the
+ *                      host is in high speed mode this will be a uframe.  If
+ *                      the host is in low speed mode this will be a full frame.
+ * @start_active_frame: If we are partway through a split transfer, this will be
+ *			what next_active_frame was when we started.  Otherwise
+ *			it should always be the same as next_active_frame.
+ * @num_hs_transfers:   Number of transfers in hs_transfers.
+ *                      Normally this is 1 but can be more than one for splits.
+ *                      Always >= 1 unless the host is in low/full speed mode.
+ * @hs_transfers:       Transfers that are scheduled as seen by the high speed
+ *                      bus.  Not used if host is in low or full speed mode (but
+ *                      note that it IS USED if the device is low or full speed
+ *                      as long as the HOST is in high speed mode).
+ * @ls_start_schedule_slice: Start time (in slices) on the low speed bus
+ *                           schedule that's being used by this device.  This
+ *			     will be on the periodic_bitmap in a
+ *                           "struct dwc2_tt".  Not used if this device is high
+ *                           speed.  Note that this is in "schedule slice" which
+ *                           is tightly packed.
+ * @ntd:                Actual number of transfer descriptors in a list
+ * @dw_align_buf:       Used instead of original buffer if its physical address
+ *                      is not dword-aligned
+ * @dw_align_buf_dma:   DMA address for dw_align_buf
+ * @qtd_list:           List of QTDs for this QH
+ * @channel:            Host channel currently processing transfers for this QH
+ * @qh_list_entry:      Entry for QH in either the periodic or non-periodic
+ *                      schedule
+ * @desc_list:          List of transfer descriptors
+ * @desc_list_dma:      Physical address of desc_list
+ * @desc_list_sz:       Size of descriptors list
+ * @n_bytes:            Xfer Bytes array. Each element corresponds to a transfer
+ *                      descriptor and indicates original XferSize value for the
+ *                      descriptor
+ * @unreserve_timer:    Timer for releasing periodic reservation.
+ * @wait_timer:         Timer used to wait before re-queuing.
+ * @dwc_tt:            Pointer to our tt info (or NULL if no tt).
+ * @ttport:             Port number within our tt.
+ * @tt_buffer_dirty     True if clear_tt_buffer_complete is pending
+ * @unreserve_pending:  True if we planned to unreserve but haven't yet.
+ * @schedule_low_speed: True if we have a low/full speed component (either the
+ *			host is in low/full speed mode or do_split).
+ * @want_wait:          We should wait before re-queuing; only matters for non-
+ *                      periodic transfers and is ignored for periodic ones.
+ * @wait_timer_cancel:  Set to true to cancel the wait_timer.
+ *
+ * @tt_buffer_dirty:	True if EP's TT buffer is not clean.
+ * A Queue Head (QH) holds the static characteristics of an endpoint and
+ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
+ * be entered in either the non-periodic or periodic schedule.
+ */
+struct dwc2_qh {
+	struct dwc2_hsotg *hsotg;
+	u8 ep_type;
+	u8 ep_is_in;
+	u16 maxp;
+	u16 maxp_mult;
+	u8 dev_speed;
+	u8 data_toggle;
+	u8 ping_state;
+	u8 do_split;
+	u8 td_first;
+	u8 td_last;
+	u16 host_us;
+	u16 device_us;
+	u16 host_interval;
+	u16 device_interval;
+	u16 next_active_frame;
+	u16 start_active_frame;
+	s16 num_hs_transfers;
+	struct dwc2_hs_transfer_time hs_transfers[DWC2_HS_SCHEDULE_UFRAMES];
+	u32 ls_start_schedule_slice;
+	u16 ntd;
+	u8 *dw_align_buf;
+	dma_addr_t dw_align_buf_dma;
+	struct list_head qtd_list;
+	struct dwc2_host_chan *channel;
+	struct list_head qh_list_entry;
+	struct dwc2_dma_desc *desc_list;
+	dma_addr_t desc_list_dma;
+	u32 desc_list_sz;
+	u32 *n_bytes;
+	struct timer_list unreserve_timer;
+	struct hrtimer wait_timer;
+	struct dwc2_tt *dwc_tt;
+	int ttport;
+	unsigned tt_buffer_dirty:1;
+	unsigned unreserve_pending:1;
+	unsigned schedule_low_speed:1;
+	unsigned want_wait:1;
+	unsigned wait_timer_cancel:1;
+};
+
+/**
+ * struct dwc2_qtd - Software queue transfer descriptor (QTD)
+ *
+ * @control_phase:      Current phase for control transfers (Setup, Data, or
+ *                      Status)
+ * @in_process:         Indicates if this QTD is currently processed by HW
+ * @data_toggle:        Determines the PID of the next data packet for the
+ *                      data phase of control transfers. Ignored for other
+ *                      transfer types. One of the following values:
+ *                       - DWC2_HC_PID_DATA0
+ *                       - DWC2_HC_PID_DATA1
+ * @complete_split:     Keeps track of the current split type for FS/LS
+ *                      endpoints on a HS Hub
+ * @isoc_split_pos:     Position of the ISOC split in full/low speed
+ * @isoc_frame_index:   Index of the next frame descriptor for an isochronous
+ *                      transfer. A frame descriptor describes the buffer
+ *                      position and length of the data to be transferred in the
+ *                      next scheduled (micro)frame of an isochronous transfer.
+ *                      It also holds status for that transaction. The frame
+ *                      index starts at 0.
+ * @isoc_split_offset:  Position of the ISOC split in the buffer for the
+ *                      current frame
+ * @ssplit_out_xfer_count: How many bytes transferred during SSPLIT OUT
+ * @error_count:        Holds the number of bus errors that have occurred for
+ *                      a transaction within this transfer
+ * @n_desc:             Number of DMA descriptors for this QTD
+ * @isoc_frame_index_last: Last activated frame (packet) index, used in
+ *                      descriptor DMA mode only
+ * @num_naks:           Number of NAKs received on this QTD.
+ * @urb:                URB for this transfer
+ * @qh:                 Queue head for this QTD
+ * @qtd_list_entry:     For linking to the QH's list of QTDs
+ * @isoc_td_first:	Index of first activated isochronous transfer
+ *			descriptor in Descriptor DMA mode
+ * @isoc_td_last:	Index of last activated isochronous transfer
+ *			descriptor in Descriptor DMA mode
+ *
+ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
+ * interrupt, or isochronous transfer. A single QTD is created for each URB
+ * (of one of these types) submitted to the HCD. The transfer associated with
+ * a QTD may require one or multiple transactions.
+ *
+ * A QTD is linked to a Queue Head, which is entered in either the
+ * non-periodic or periodic schedule for execution. When a QTD is chosen for
+ * execution, some or all of its transactions may be executed. After
+ * execution, the state of the QTD is updated. The QTD may be retired if all
+ * its transactions are complete or if an error occurred. Otherwise, it
+ * remains in the schedule so more transactions can be executed later.
+ */
+struct dwc2_qtd {
+	enum dwc2_control_phase control_phase;
+	u8 in_process;
+	u8 data_toggle;
+	u8 complete_split;
+	u8 isoc_split_pos;
+	u16 isoc_frame_index;
+	u16 isoc_split_offset;
+	u16 isoc_td_last;
+	u16 isoc_td_first;
+	u32 ssplit_out_xfer_count;
+	u8 error_count;
+	u8 n_desc;
+	u16 isoc_frame_index_last;
+	u16 num_naks;
+	struct dwc2_hcd_urb *urb;
+	struct dwc2_qh *qh;
+	struct list_head qtd_list_entry;
+};
+
+#ifdef DEBUG
+struct hc_xfer_info {
+	struct dwc2_hsotg *hsotg;
+	struct dwc2_host_chan *chan;
+};
+#endif
+
+u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg);
+
+/* Gets the struct usb_hcd that contains a struct dwc2_hsotg */
+static inline struct usb_hcd *dwc2_hsotg_to_hcd(struct dwc2_hsotg *hsotg)
+{
+	return (struct usb_hcd *)hsotg->priv;
+}
+
+/*
+ * Inline used to disable one channel interrupt. Channel interrupts are
+ * disabled when the channel is halted or released by the interrupt handler.
+ * There is no need to handle further interrupts of that type until the
+ * channel is re-assigned. In fact, subsequent handling may cause crashes
+ * because the channel structures are cleaned up when the channel is released.
+ */
+static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr)
+{
+	u32 mask = dwc2_readl(hsotg, HCINTMSK(chnum));
+
+	mask &= ~intr;
+	dwc2_writel(hsotg, mask, HCINTMSK(chnum));
+}
+
+void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan);
+void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
+		  enum dwc2_halt_status halt_status);
+void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
+				 struct dwc2_host_chan *chan);
+
+/*
+ * Reads HPRT0 in preparation to modify. It keeps the WC bits 0 so that if they
+ * are read as 1, they won't clear when written back.
+ */
+static inline u32 dwc2_read_hprt0(struct dwc2_hsotg *hsotg)
+{
+	u32 hprt0 = dwc2_readl(hsotg, HPRT0);
+
+	hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
+	return hprt0;
+}
+
+static inline u8 dwc2_hcd_get_ep_num(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->ep_num;
+}
+
+static inline u8 dwc2_hcd_get_pipe_type(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->pipe_type;
+}
+
+static inline u16 dwc2_hcd_get_maxp(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->maxp;
+}
+
+static inline u16 dwc2_hcd_get_maxp_mult(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->maxp_mult;
+}
+
+static inline u8 dwc2_hcd_get_dev_addr(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->dev_addr;
+}
+
+static inline u8 dwc2_hcd_is_pipe_isoc(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->pipe_type == USB_ENDPOINT_XFER_ISOC;
+}
+
+static inline u8 dwc2_hcd_is_pipe_int(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->pipe_type == USB_ENDPOINT_XFER_INT;
+}
+
+static inline u8 dwc2_hcd_is_pipe_bulk(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->pipe_type == USB_ENDPOINT_XFER_BULK;
+}
+
+static inline u8 dwc2_hcd_is_pipe_control(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->pipe_type == USB_ENDPOINT_XFER_CONTROL;
+}
+
+static inline u8 dwc2_hcd_is_pipe_in(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->pipe_dir == USB_DIR_IN;
+}
+
+static inline u8 dwc2_hcd_is_pipe_out(struct dwc2_hcd_pipe_info *pipe)
+{
+	return !dwc2_hcd_is_pipe_in(pipe);
+}
+
+int dwc2_hcd_init(struct dwc2_hsotg *hsotg);
+void dwc2_hcd_remove(struct dwc2_hsotg *hsotg);
+
+/* Transaction Execution Functions */
+enum dwc2_transaction_type dwc2_hcd_select_transactions(
+						struct dwc2_hsotg *hsotg);
+void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg,
+				 enum dwc2_transaction_type tr_type);
+
+/* Schedule Queue Functions */
+/* Implemented in hcd_queue.c */
+struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
+				   struct dwc2_hcd_urb *urb,
+					  gfp_t mem_flags);
+void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
+int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
+void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
+void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+			    int sched_csplit);
+
+void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb);
+int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
+		     struct dwc2_qh *qh);
+
+/* Unlinks and frees a QTD */
+static inline void dwc2_hcd_qtd_unlink_and_free(struct dwc2_hsotg *hsotg,
+						struct dwc2_qtd *qtd,
+						struct dwc2_qh *qh)
+{
+	list_del(&qtd->qtd_list_entry);
+	kfree(qtd);
+}
+
+/* Descriptor DMA support functions */
+void dwc2_hcd_start_xfer_ddma(struct dwc2_hsotg *hsotg,
+			      struct dwc2_qh *qh);
+void dwc2_hcd_complete_xfer_ddma(struct dwc2_hsotg *hsotg,
+				 struct dwc2_host_chan *chan, int chnum,
+					enum dwc2_halt_status halt_status);
+
+int dwc2_hcd_qh_init_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+			  gfp_t mem_flags);
+void dwc2_hcd_qh_free_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
+
+/* Check if QH is non-periodic */
+#define dwc2_qh_is_non_per(_qh_ptr_) \
+	((_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_BULK || \
+	 (_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_CONTROL)
+
+#ifdef CONFIG_USB_DWC2_DEBUG_PERIODIC
+static inline bool dbg_hc(struct dwc2_host_chan *hc) { return true; }
+static inline bool dbg_qh(struct dwc2_qh *qh) { return true; }
+static inline bool dbg_urb(struct urb *urb) { return true; }
+static inline bool dbg_perio(void) { return true; }
+#else /* !CONFIG_USB_DWC2_DEBUG_PERIODIC */
+static inline bool dbg_hc(struct dwc2_host_chan *hc)
+{
+	return hc->ep_type == USB_ENDPOINT_XFER_BULK ||
+	       hc->ep_type == USB_ENDPOINT_XFER_CONTROL;
+}
+
+static inline bool dbg_qh(struct dwc2_qh *qh)
+{
+	return qh->ep_type == USB_ENDPOINT_XFER_BULK ||
+	       qh->ep_type == USB_ENDPOINT_XFER_CONTROL;
+}
+
+static inline bool dbg_urb(struct urb *urb)
+{
+	return usb_pipetype(urb->pipe) == PIPE_BULK ||
+	       usb_pipetype(urb->pipe) == PIPE_CONTROL;
+}
+
+static inline bool dbg_perio(void) { return false; }
+#endif
+
+/*
+ * Returns true if frame1 index is greater than frame2 index. The comparison
+ * is done modulo FRLISTEN_64_SIZE. This accounts for the rollover of the
+ * frame number when the max index frame number is reached.
+ */
+static inline bool dwc2_frame_idx_num_gt(u16 fr_idx1, u16 fr_idx2)
+{
+	u16 diff = fr_idx1 - fr_idx2;
+	u16 sign = diff & (FRLISTEN_64_SIZE >> 1);
+
+	return diff && !sign;
+}
+
+/*
+ * Returns true if frame1 is less than or equal to frame2. The comparison is
+ * done modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the
+ * frame number when the max frame number is reached.
+ */
+static inline int dwc2_frame_num_le(u16 frame1, u16 frame2)
+{
+	return ((frame2 - frame1) & HFNUM_MAX_FRNUM) <= (HFNUM_MAX_FRNUM >> 1);
+}
+
+/*
+ * Returns true if frame1 is greater than frame2. The comparison is done
+ * modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
+ * number when the max frame number is reached.
+ */
+static inline int dwc2_frame_num_gt(u16 frame1, u16 frame2)
+{
+	return (frame1 != frame2) &&
+	       ((frame1 - frame2) & HFNUM_MAX_FRNUM) < (HFNUM_MAX_FRNUM >> 1);
+}
+
+/*
+ * Increments frame by the amount specified by inc. The addition is done
+ * modulo HFNUM_MAX_FRNUM. Returns the incremented value.
+ */
+static inline u16 dwc2_frame_num_inc(u16 frame, u16 inc)
+{
+	return (frame + inc) & HFNUM_MAX_FRNUM;
+}
+
+static inline u16 dwc2_frame_num_dec(u16 frame, u16 dec)
+{
+	return (frame + HFNUM_MAX_FRNUM + 1 - dec) & HFNUM_MAX_FRNUM;
+}
+
+static inline u16 dwc2_full_frame_num(u16 frame)
+{
+	return (frame & HFNUM_MAX_FRNUM) >> 3;
+}
+
+static inline u16 dwc2_micro_frame_num(u16 frame)
+{
+	return frame & 0x7;
+}
+
+/*
+ * Returns the Core Interrupt Status register contents, ANDed with the Core
+ * Interrupt Mask register contents
+ */
+static inline u32 dwc2_read_core_intr(struct dwc2_hsotg *hsotg)
+{
+	return dwc2_readl(hsotg, GINTSTS) &
+	       dwc2_readl(hsotg, GINTMSK);
+}
+
+static inline u32 dwc2_hcd_urb_get_status(struct dwc2_hcd_urb *dwc2_urb)
+{
+	return dwc2_urb->status;
+}
+
+static inline u32 dwc2_hcd_urb_get_actual_length(
+		struct dwc2_hcd_urb *dwc2_urb)
+{
+	return dwc2_urb->actual_length;
+}
+
+static inline u32 dwc2_hcd_urb_get_error_count(struct dwc2_hcd_urb *dwc2_urb)
+{
+	return dwc2_urb->error_count;
+}
+
+static inline void dwc2_hcd_urb_set_iso_desc_params(
+		struct dwc2_hcd_urb *dwc2_urb, int desc_num, u32 offset,
+		u32 length)
+{
+	dwc2_urb->iso_descs[desc_num].offset = offset;
+	dwc2_urb->iso_descs[desc_num].length = length;
+}
+
+static inline u32 dwc2_hcd_urb_get_iso_desc_status(
+		struct dwc2_hcd_urb *dwc2_urb, int desc_num)
+{
+	return dwc2_urb->iso_descs[desc_num].status;
+}
+
+static inline u32 dwc2_hcd_urb_get_iso_desc_actual_length(
+		struct dwc2_hcd_urb *dwc2_urb, int desc_num)
+{
+	return dwc2_urb->iso_descs[desc_num].actual_length;
+}
+
+static inline int dwc2_hcd_is_bandwidth_allocated(struct dwc2_hsotg *hsotg,
+						  struct usb_host_endpoint *ep)
+{
+	struct dwc2_qh *qh = ep->hcpriv;
+
+	if (qh && !list_empty(&qh->qh_list_entry))
+		return 1;
+
+	return 0;
+}
+
+static inline u16 dwc2_hcd_get_ep_bandwidth(struct dwc2_hsotg *hsotg,
+					    struct usb_host_endpoint *ep)
+{
+	struct dwc2_qh *qh = ep->hcpriv;
+
+	if (!qh) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	return qh->host_us;
+}
+
+void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
+			       struct dwc2_host_chan *chan, int chnum,
+				      struct dwc2_qtd *qtd);
+
+/* HCD Core API */
+
+/**
+ * dwc2_handle_hcd_intr() - Called on every hardware interrupt
+ *
+ * @hsotg: The DWC2 HCD
+ *
+ * Returns IRQ_HANDLED if interrupt is handled
+ * Return IRQ_NONE if interrupt is not handled
+ */
+irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg);
+
+/**
+ * dwc2_hcd_stop() - Halts the DWC_otg host mode operation
+ *
+ * @hsotg: The DWC2 HCD
+ */
+void dwc2_hcd_stop(struct dwc2_hsotg *hsotg);
+
+/**
+ * dwc2_hcd_is_b_host() - Returns 1 if core currently is acting as B host,
+ * and 0 otherwise
+ *
+ * @hsotg: The DWC2 HCD
+ */
+int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg);
+
+/**
+ * dwc2_hcd_dump_state() - Dumps hsotg state
+ *
+ * @hsotg: The DWC2 HCD
+ *
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg);
+
+/* URB interface */
+
+/* Transfer flags */
+#define URB_GIVEBACK_ASAP	0x1
+#define URB_SEND_ZERO_PACKET	0x2
+
+/* Host driver callbacks */
+struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg,
+				      void *context, gfp_t mem_flags,
+				      int *ttport);
+
+void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg,
+			   struct dwc2_tt *dwc_tt);
+int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context);
+void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
+			int status);
+
+#endif /* __DWC2_HCD_H__ */

linux-7.2.3/drivers/usb/dwc2/hw.h

@@ -0,0 +1,889 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * hw.h - DesignWare HS OTG Controller hardware definitions
+ *
+ * Copyright 2004-2013 Synopsys, Inc.
+ */
+
+#ifndef __DWC2_HW_H__
+#define __DWC2_HW_H__
+
+#define HSOTG_REG(x)	(x)
+
+#define GOTGCTL				HSOTG_REG(0x000)
+#define GOTGCTL_EUSB2_DISC_SUPP	BIT(28)
+#define GOTGCTL_CHIRPEN			BIT(27)
+#define GOTGCTL_MULT_VALID_BC_MASK	(0x1f << 22)
+#define GOTGCTL_MULT_VALID_BC_SHIFT	22
+#define GOTGCTL_CURMODE_HOST		BIT(21)
+#define GOTGCTL_OTGVER			BIT(20)
+#define GOTGCTL_BSESVLD			BIT(19)
+#define GOTGCTL_ASESVLD			BIT(18)
+#define GOTGCTL_DBNC_SHORT		BIT(17)
+#define GOTGCTL_CONID_B			BIT(16)
+#define GOTGCTL_DBNCE_FLTR_BYPASS	BIT(15)
+#define GOTGCTL_DEVHNPEN		BIT(11)
+#define GOTGCTL_HSTSETHNPEN		BIT(10)
+#define GOTGCTL_HNPREQ			BIT(9)
+#define GOTGCTL_HSTNEGSCS		BIT(8)
+#define GOTGCTL_BVALOVAL		BIT(7)
+#define GOTGCTL_BVALOEN			BIT(6)
+#define GOTGCTL_AVALOVAL		BIT(5)
+#define GOTGCTL_AVALOEN			BIT(4)
+#define GOTGCTL_VBVALOVAL		BIT(3)
+#define GOTGCTL_VBVALOEN		BIT(2)
+#define GOTGCTL_SESREQ			BIT(1)
+#define GOTGCTL_SESREQSCS		BIT(0)
+
+#define GOTGINT				HSOTG_REG(0x004)
+#define GOTGINT_DBNCE_DONE		BIT(19)
+#define GOTGINT_A_DEV_TOUT_CHG		BIT(18)
+#define GOTGINT_HST_NEG_DET		BIT(17)
+#define GOTGINT_HST_NEG_SUC_STS_CHNG	BIT(9)
+#define GOTGINT_SES_REQ_SUC_STS_CHNG	BIT(8)
+#define GOTGINT_SES_END_DET		BIT(2)
+
+#define GAHBCFG				HSOTG_REG(0x008)
+#define GAHBCFG_AHB_SINGLE		BIT(23)
+#define GAHBCFG_NOTI_ALL_DMA_WRIT	BIT(22)
+#define GAHBCFG_REM_MEM_SUPP		BIT(21)
+#define GAHBCFG_P_TXF_EMP_LVL		BIT(8)
+#define GAHBCFG_NP_TXF_EMP_LVL		BIT(7)
+#define GAHBCFG_DMA_EN			BIT(5)
+#define GAHBCFG_HBSTLEN_MASK		(0xf << 1)
+#define GAHBCFG_HBSTLEN_SHIFT		1
+#define GAHBCFG_HBSTLEN_SINGLE		0
+#define GAHBCFG_HBSTLEN_INCR		1
+#define GAHBCFG_HBSTLEN_INCR4		3
+#define GAHBCFG_HBSTLEN_INCR8		5
+#define GAHBCFG_HBSTLEN_INCR16		7
+#define GAHBCFG_GLBL_INTR_EN		BIT(0)
+#define GAHBCFG_CTRL_MASK		(GAHBCFG_P_TXF_EMP_LVL | \
+					 GAHBCFG_NP_TXF_EMP_LVL | \
+					 GAHBCFG_DMA_EN | \
+					 GAHBCFG_GLBL_INTR_EN)
+
+#define GUSBCFG				HSOTG_REG(0x00C)
+#define GUSBCFG_FORCEDEVMODE		BIT(30)
+#define GUSBCFG_FORCEHOSTMODE		BIT(29)
+#define GUSBCFG_TXENDDELAY		BIT(28)
+#define GUSBCFG_ICTRAFFICPULLREMOVE	BIT(27)
+#define GUSBCFG_ICUSBCAP		BIT(26)
+#define GUSBCFG_ULPI_INT_PROT_DIS	BIT(25)
+#define GUSBCFG_INDICATORPASSTHROUGH	BIT(24)
+#define GUSBCFG_INDICATORCOMPLEMENT	BIT(23)
+#define GUSBCFG_TERMSELDLPULSE		BIT(22)
+#define GUSBCFG_ULPI_INT_VBUS_IND	BIT(21)
+#define GUSBCFG_ULPI_EXT_VBUS_DRV	BIT(20)
+#define GUSBCFG_ULPI_CLK_SUSP_M		BIT(19)
+#define GUSBCFG_ULPI_AUTO_RES		BIT(18)
+#define GUSBCFG_ULPI_FS_LS		BIT(17)
+#define GUSBCFG_OTG_UTMI_FS_SEL		BIT(16)
+#define GUSBCFG_PHY_LP_CLK_SEL		BIT(15)
+#define GUSBCFG_USBTRDTIM_MASK		(0xf << 10)
+#define GUSBCFG_USBTRDTIM_SHIFT		10
+#define GUSBCFG_HNPCAP			BIT(9)
+#define GUSBCFG_SRPCAP			BIT(8)
+#define GUSBCFG_DDRSEL			BIT(7)
+#define GUSBCFG_PHYSEL			BIT(6)
+#define GUSBCFG_FSINTF			BIT(5)
+#define GUSBCFG_ULPI_UTMI_SEL		BIT(4)
+#define GUSBCFG_PHYIF16			BIT(3)
+#define GUSBCFG_PHYIF8			(0 << 3)
+#define GUSBCFG_TOUTCAL_MASK		(0x7 << 0)
+#define GUSBCFG_TOUTCAL_SHIFT		0
+#define GUSBCFG_TOUTCAL_LIMIT		0x7
+#define GUSBCFG_TOUTCAL(_x)		((_x) << 0)
+
+#define GRSTCTL				HSOTG_REG(0x010)
+#define GRSTCTL_AHBIDLE			BIT(31)
+#define GRSTCTL_DMAREQ			BIT(30)
+#define GRSTCTL_CSFTRST_DONE		BIT(29)
+#define GRSTCTL_CLOCK_SWITH_TIMER_MASK		(0x7 << 11)
+#define GRSTCTL_CLOCK_SWITH_TIMER_SHIFT		11
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_19		0x0
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_15		0x1
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_147		0x2
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_50		0x3
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_100		0x4
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_125		0x5
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_200		0x6
+#define GRSTCTL_CLOCK_SWITH_TIMER_VALUE_DIS		0x7
+#define GRSTCTL_CLOCK_SWITH_TIMER(_x)		((_x) << 11)
+#define GRSTCTL_TXFNUM_MASK		(0x1f << 6)
+#define GRSTCTL_TXFNUM_SHIFT		6
+#define GRSTCTL_TXFNUM_LIMIT		0x1f
+#define GRSTCTL_TXFNUM(_x)		((_x) << 6)
+#define GRSTCTL_TXFFLSH			BIT(5)
+#define GRSTCTL_RXFFLSH			BIT(4)
+#define GRSTCTL_IN_TKNQ_FLSH		BIT(3)
+#define GRSTCTL_FRMCNTRRST		BIT(2)
+#define GRSTCTL_HSFTRST			BIT(1)
+#define GRSTCTL_CSFTRST			BIT(0)
+
+#define GINTSTS				HSOTG_REG(0x014)
+#define GINTMSK				HSOTG_REG(0x018)
+#define GINTSTS_WKUPINT			BIT(31)
+#define GINTSTS_SESSREQINT		BIT(30)
+#define GINTSTS_DISCONNINT		BIT(29)
+#define GINTSTS_CONIDSTSCHNG		BIT(28)
+#define GINTSTS_LPMTRANRCVD		BIT(27)
+#define GINTSTS_PTXFEMP			BIT(26)
+#define GINTSTS_HCHINT			BIT(25)
+#define GINTSTS_PRTINT			BIT(24)
+#define GINTSTS_RESETDET		BIT(23)
+#define GINTSTS_FET_SUSP		BIT(22)
+#define GINTSTS_INCOMPL_IP		BIT(21)
+#define GINTSTS_INCOMPL_SOOUT		BIT(21)
+#define GINTSTS_INCOMPL_SOIN		BIT(20)
+#define GINTSTS_OEPINT			BIT(19)
+#define GINTSTS_IEPINT			BIT(18)
+#define GINTSTS_EPMIS			BIT(17)
+#define GINTSTS_RESTOREDONE		BIT(16)
+#define GINTSTS_EOPF			BIT(15)
+#define GINTSTS_ISOUTDROP		BIT(14)
+#define GINTSTS_ENUMDONE		BIT(13)
+#define GINTSTS_USBRST			BIT(12)
+#define GINTSTS_USBSUSP			BIT(11)
+#define GINTSTS_ERLYSUSP		BIT(10)
+#define GINTSTS_I2CINT			BIT(9)
+#define GINTSTS_ULPI_CK_INT		BIT(8)
+#define GINTSTS_GOUTNAKEFF		BIT(7)
+#define GINTSTS_GINNAKEFF		BIT(6)
+#define GINTSTS_NPTXFEMP		BIT(5)
+#define GINTSTS_RXFLVL			BIT(4)
+#define GINTSTS_SOF			BIT(3)
+#define GINTSTS_OTGINT			BIT(2)
+#define GINTSTS_MODEMIS			BIT(1)
+#define GINTSTS_CURMODE_HOST		BIT(0)
+
+#define GRXSTSR				HSOTG_REG(0x01C)
+#define GRXSTSP				HSOTG_REG(0x020)
+#define GRXSTS_FN_MASK			(0x7f << 25)
+#define GRXSTS_FN_SHIFT			25
+#define GRXSTS_PKTSTS_MASK		(0xf << 17)
+#define GRXSTS_PKTSTS_SHIFT		17
+#define GRXSTS_PKTSTS_GLOBALOUTNAK	1
+#define GRXSTS_PKTSTS_OUTRX		2
+#define GRXSTS_PKTSTS_HCHIN		2
+#define GRXSTS_PKTSTS_OUTDONE		3
+#define GRXSTS_PKTSTS_HCHIN_XFER_COMP	3
+#define GRXSTS_PKTSTS_SETUPDONE		4
+#define GRXSTS_PKTSTS_DATATOGGLEERR	5
+#define GRXSTS_PKTSTS_SETUPRX		6
+#define GRXSTS_PKTSTS_HCHHALTED		7
+#define GRXSTS_HCHNUM_MASK		(0xf << 0)
+#define GRXSTS_HCHNUM_SHIFT		0
+#define GRXSTS_DPID_MASK		(0x3 << 15)
+#define GRXSTS_DPID_SHIFT		15
+#define GRXSTS_BYTECNT_MASK		(0x7ff << 4)
+#define GRXSTS_BYTECNT_SHIFT		4
+#define GRXSTS_EPNUM_MASK		(0xf << 0)
+#define GRXSTS_EPNUM_SHIFT		0
+
+#define GRXFSIZ				HSOTG_REG(0x024)
+#define GRXFSIZ_DEPTH_MASK		(0xffff << 0)
+#define GRXFSIZ_DEPTH_SHIFT		0
+
+#define GNPTXFSIZ			HSOTG_REG(0x028)
+/* Use FIFOSIZE_* constants to access this register */
+
+#define GNPTXSTS			HSOTG_REG(0x02C)
+#define GNPTXSTS_NP_TXQ_TOP_MASK		(0x7f << 24)
+#define GNPTXSTS_NP_TXQ_TOP_SHIFT		24
+#define GNPTXSTS_NP_TXQ_SPC_AVAIL_MASK		(0xff << 16)
+#define GNPTXSTS_NP_TXQ_SPC_AVAIL_SHIFT		16
+#define GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(_v)	(((_v) >> 16) & 0xff)
+#define GNPTXSTS_NP_TXF_SPC_AVAIL_MASK		(0xffff << 0)
+#define GNPTXSTS_NP_TXF_SPC_AVAIL_SHIFT		0
+#define GNPTXSTS_NP_TXF_SPC_AVAIL_GET(_v)	(((_v) >> 0) & 0xffff)
+
+#define GI2CCTL				HSOTG_REG(0x0030)
+#define GI2CCTL_BSYDNE			BIT(31)
+#define GI2CCTL_RW			BIT(30)
+#define GI2CCTL_I2CDATSE0		BIT(28)
+#define GI2CCTL_I2CDEVADDR_MASK		(0x3 << 26)
+#define GI2CCTL_I2CDEVADDR_SHIFT	26
+#define GI2CCTL_I2CSUSPCTL		BIT(25)
+#define GI2CCTL_ACK			BIT(24)
+#define GI2CCTL_I2CEN			BIT(23)
+#define GI2CCTL_ADDR_MASK		(0x7f << 16)
+#define GI2CCTL_ADDR_SHIFT		16
+#define GI2CCTL_REGADDR_MASK		(0xff << 8)
+#define GI2CCTL_REGADDR_SHIFT		8
+#define GI2CCTL_RWDATA_MASK		(0xff << 0)
+#define GI2CCTL_RWDATA_SHIFT		0
+
+#define GPVNDCTL			HSOTG_REG(0x0034)
+#define GGPIO				HSOTG_REG(0x0038)
+#define GGPIO_STM32_OTG_GCCFG_PWRDWN	BIT(16)
+#define GGPIO_STM32_OTG_GCCFG_VBDEN	BIT(21)
+#define GGPIO_STM32_OTG_GCCFG_IDEN	BIT(22)
+
+#define GUID				HSOTG_REG(0x003c)
+#define GSNPSID				HSOTG_REG(0x0040)
+#define GHWCFG1				HSOTG_REG(0x0044)
+#define GSNPSID_ID_MASK			GENMASK(31, 16)
+
+#define GHWCFG2				HSOTG_REG(0x0048)
+#define GHWCFG2_OTG_ENABLE_IC_USB		BIT(31)
+#define GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK		(0x1f << 26)
+#define GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT		26
+#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK	(0x3 << 24)
+#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT	24
+#define GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK	(0x3 << 22)
+#define GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT	22
+#define GHWCFG2_MULTI_PROC_INT			BIT(20)
+#define GHWCFG2_DYNAMIC_FIFO			BIT(19)
+#define GHWCFG2_PERIO_EP_SUPPORTED		BIT(18)
+#define GHWCFG2_NUM_HOST_CHAN_MASK		(0xf << 14)
+#define GHWCFG2_NUM_HOST_CHAN_SHIFT		14
+#define GHWCFG2_NUM_DEV_EP_MASK			(0xf << 10)
+#define GHWCFG2_NUM_DEV_EP_SHIFT		10
+#define GHWCFG2_FS_PHY_TYPE_MASK		(0x3 << 8)
+#define GHWCFG2_FS_PHY_TYPE_SHIFT		8
+#define GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED	0
+#define GHWCFG2_FS_PHY_TYPE_DEDICATED		1
+#define GHWCFG2_FS_PHY_TYPE_SHARED_UTMI		2
+#define GHWCFG2_FS_PHY_TYPE_SHARED_ULPI		3
+#define GHWCFG2_HS_PHY_TYPE_MASK		(0x3 << 6)
+#define GHWCFG2_HS_PHY_TYPE_SHIFT		6
+#define GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED	0
+#define GHWCFG2_HS_PHY_TYPE_UTMI		1
+#define GHWCFG2_HS_PHY_TYPE_ULPI		2
+#define GHWCFG2_HS_PHY_TYPE_UTMI_ULPI		3
+#define GHWCFG2_POINT2POINT			BIT(5)
+#define GHWCFG2_ARCHITECTURE_MASK		(0x3 << 3)
+#define GHWCFG2_ARCHITECTURE_SHIFT		3
+#define GHWCFG2_SLAVE_ONLY_ARCH			0
+#define GHWCFG2_EXT_DMA_ARCH			1
+#define GHWCFG2_INT_DMA_ARCH			2
+#define GHWCFG2_OP_MODE_MASK			(0x7 << 0)
+#define GHWCFG2_OP_MODE_SHIFT			0
+#define GHWCFG2_OP_MODE_HNP_SRP_CAPABLE		0
+#define GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE	1
+#define GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE	2
+#define GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE	3
+#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE	4
+#define GHWCFG2_OP_MODE_SRP_CAPABLE_HOST	5
+#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST	6
+#define GHWCFG2_OP_MODE_UNDEFINED		7
+
+#define GHWCFG3				HSOTG_REG(0x004c)
+#define GHWCFG3_DFIFO_DEPTH_MASK		(0xffff << 16)
+#define GHWCFG3_DFIFO_DEPTH_SHIFT		16
+#define GHWCFG3_OTG_LPM_EN			BIT(15)
+#define GHWCFG3_BC_SUPPORT			BIT(14)
+#define GHWCFG3_OTG_ENABLE_HSIC			BIT(13)
+#define GHWCFG3_ADP_SUPP			BIT(12)
+#define GHWCFG3_SYNCH_RESET_TYPE		BIT(11)
+#define GHWCFG3_OPTIONAL_FEATURES		BIT(10)
+#define GHWCFG3_VENDOR_CTRL_IF			BIT(9)
+#define GHWCFG3_I2C				BIT(8)
+#define GHWCFG3_OTG_FUNC			BIT(7)
+#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK	(0x7 << 4)
+#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT	4
+#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK	(0xf << 0)
+#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT	0
+
+#define GHWCFG4				HSOTG_REG(0x0050)
+#define GHWCFG4_DESC_DMA_DYN			BIT(31)
+#define GHWCFG4_DESC_DMA			BIT(30)
+#define GHWCFG4_NUM_IN_EPS_MASK			(0xf << 26)
+#define GHWCFG4_NUM_IN_EPS_SHIFT		26
+#define GHWCFG4_DED_FIFO_EN			BIT(25)
+#define GHWCFG4_DED_FIFO_SHIFT		25
+#define GHWCFG4_SESSION_END_FILT_EN		BIT(24)
+#define GHWCFG4_B_VALID_FILT_EN			BIT(23)
+#define GHWCFG4_A_VALID_FILT_EN			BIT(22)
+#define GHWCFG4_VBUS_VALID_FILT_EN		BIT(21)
+#define GHWCFG4_IDDIG_FILT_EN			BIT(20)
+#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_MASK	(0xf << 16)
+#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_SHIFT	16
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK	(0x3 << 14)
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT	14
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8		0
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_16		1
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16	2
+#define GHWCFG4_ACG_SUPPORTED			BIT(12)
+#define GHWCFG4_IPG_ISOC_SUPPORTED		BIT(11)
+#define GHWCFG4_SERVICE_INTERVAL_SUPPORTED      BIT(10)
+#define GHWCFG4_XHIBER				BIT(7)
+#define GHWCFG4_HIBER				BIT(6)
+#define GHWCFG4_MIN_AHB_FREQ			BIT(5)
+#define GHWCFG4_POWER_OPTIMIZ			BIT(4)
+#define GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK	(0xf << 0)
+#define GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT	0
+
+#define GLPMCFG				HSOTG_REG(0x0054)
+#define GLPMCFG_INVSELHSIC		BIT(31)
+#define GLPMCFG_HSICCON			BIT(30)
+#define GLPMCFG_RSTRSLPSTS		BIT(29)
+#define GLPMCFG_ENBESL			BIT(28)
+#define GLPMCFG_LPM_RETRYCNT_STS_MASK	(0x7 << 25)
+#define GLPMCFG_LPM_RETRYCNT_STS_SHIFT	25
+#define GLPMCFG_SNDLPM			BIT(24)
+#define GLPMCFG_RETRY_CNT_MASK		(0x7 << 21)
+#define GLPMCFG_RETRY_CNT_SHIFT		21
+#define GLPMCFG_LPM_REJECT_CTRL_CONTROL	BIT(21)
+#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC	BIT(22)
+#define GLPMCFG_LPM_CHNL_INDX_MASK	(0xf << 17)
+#define GLPMCFG_LPM_CHNL_INDX_SHIFT	17
+#define GLPMCFG_L1RESUMEOK		BIT(16)
+#define GLPMCFG_SLPSTS			BIT(15)
+#define GLPMCFG_COREL1RES_MASK		(0x3 << 13)
+#define GLPMCFG_COREL1RES_SHIFT		13
+#define GLPMCFG_HIRD_THRES_MASK		(0x1f << 8)
+#define GLPMCFG_HIRD_THRES_SHIFT	8
+#define GLPMCFG_HIRD_THRES_EN		(0x10 << 8)
+#define GLPMCFG_ENBLSLPM		BIT(7)
+#define GLPMCFG_BREMOTEWAKE		BIT(6)
+#define GLPMCFG_HIRD_MASK		(0xf << 2)
+#define GLPMCFG_HIRD_SHIFT		2
+#define GLPMCFG_APPL1RES		BIT(1)
+#define GLPMCFG_LPMCAP			BIT(0)
+
+#define GPWRDN				HSOTG_REG(0x0058)
+
+#define GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY	BIT(29)
+#define GPWRDN_MULT_VAL_ID_BC_MASK	(0x1f << 24)
+#define GPWRDN_MULT_VAL_ID_BC_SHIFT	24
+#define GPWRDN_ADP_INT			BIT(23)
+#define GPWRDN_BSESSVLD			BIT(22)
+#define GPWRDN_IDSTS			BIT(21)
+#define GPWRDN_LINESTATE_MASK		(0x3 << 19)
+#define GPWRDN_LINESTATE_SHIFT		19
+#define GPWRDN_STS_CHGINT_MSK		BIT(18)
+#define GPWRDN_STS_CHGINT		BIT(17)
+#define GPWRDN_SRP_DET_MSK		BIT(16)
+#define GPWRDN_SRP_DET			BIT(15)
+#define GPWRDN_CONNECT_DET_MSK		BIT(14)
+#define GPWRDN_CONNECT_DET		BIT(13)
+#define GPWRDN_DISCONN_DET_MSK		BIT(12)
+#define GPWRDN_DISCONN_DET		BIT(11)
+#define GPWRDN_RST_DET_MSK		BIT(10)
+#define GPWRDN_RST_DET			BIT(9)
+#define GPWRDN_LNSTSCHG_MSK		BIT(8)
+#define GPWRDN_LNSTSCHG			BIT(7)
+#define GPWRDN_DIS_VBUS			BIT(6)
+#define GPWRDN_PWRDNSWTCH		BIT(5)
+#define GPWRDN_PWRDNRSTN		BIT(4)
+#define GPWRDN_PWRDNCLMP		BIT(3)
+#define GPWRDN_RESTORE			BIT(2)
+#define GPWRDN_PMUACTV			BIT(1)
+#define GPWRDN_PMUINTSEL		BIT(0)
+
+#define GDFIFOCFG			HSOTG_REG(0x005c)
+#define GDFIFOCFG_EPINFOBASE_MASK	(0xffff << 16)
+#define GDFIFOCFG_EPINFOBASE_SHIFT	16
+#define GDFIFOCFG_GDFIFOCFG_MASK	(0xffff << 0)
+#define GDFIFOCFG_GDFIFOCFG_SHIFT	0
+
+#define ADPCTL				HSOTG_REG(0x0060)
+#define ADPCTL_AR_MASK			(0x3 << 27)
+#define ADPCTL_AR_SHIFT			27
+#define ADPCTL_ADP_TMOUT_INT_MSK	BIT(26)
+#define ADPCTL_ADP_SNS_INT_MSK		BIT(25)
+#define ADPCTL_ADP_PRB_INT_MSK		BIT(24)
+#define ADPCTL_ADP_TMOUT_INT		BIT(23)
+#define ADPCTL_ADP_SNS_INT		BIT(22)
+#define ADPCTL_ADP_PRB_INT		BIT(21)
+#define ADPCTL_ADPENA			BIT(20)
+#define ADPCTL_ADPRES			BIT(19)
+#define ADPCTL_ENASNS			BIT(18)
+#define ADPCTL_ENAPRB			BIT(17)
+#define ADPCTL_RTIM_MASK		(0x7ff << 6)
+#define ADPCTL_RTIM_SHIFT		6
+#define ADPCTL_PRB_PER_MASK		(0x3 << 4)
+#define ADPCTL_PRB_PER_SHIFT		4
+#define ADPCTL_PRB_DELTA_MASK		(0x3 << 2)
+#define ADPCTL_PRB_DELTA_SHIFT		2
+#define ADPCTL_PRB_DSCHRG_MASK		(0x3 << 0)
+#define ADPCTL_PRB_DSCHRG_SHIFT		0
+
+#define GREFCLK				    HSOTG_REG(0x0064)
+#define GREFCLK_REFCLKPER_MASK		    (0x1ffff << 15)
+#define GREFCLK_REFCLKPER_SHIFT		    15
+#define GREFCLK_REF_CLK_MODE		    BIT(14)
+#define GREFCLK_SOF_CNT_WKUP_ALERT_MASK	    (0x3ff)
+#define GREFCLK_SOF_CNT_WKUP_ALERT_SHIFT    0
+
+#define GINTMSK2			HSOTG_REG(0x0068)
+#define GINTMSK2_WKUP_ALERT_INT_MSK	BIT(0)
+
+#define GINTSTS2			HSOTG_REG(0x006c)
+#define GINTSTS2_WKUP_ALERT_INT		BIT(0)
+
+#define HPTXFSIZ			HSOTG_REG(0x100)
+/* Use FIFOSIZE_* constants to access this register */
+
+#define DPTXFSIZN(_a)			HSOTG_REG(0x104 + (((_a) - 1) * 4))
+/* Use FIFOSIZE_* constants to access this register */
+
+/* These apply to the GNPTXFSIZ, HPTXFSIZ and DPTXFSIZN registers */
+#define FIFOSIZE_DEPTH_MASK		(0xffff << 16)
+#define FIFOSIZE_DEPTH_SHIFT		16
+#define FIFOSIZE_STARTADDR_MASK		(0xffff << 0)
+#define FIFOSIZE_STARTADDR_SHIFT	0
+#define FIFOSIZE_DEPTH_GET(_x)		(((_x) >> 16) & 0xffff)
+
+/* Device mode registers */
+
+#define DCFG				HSOTG_REG(0x800)
+#define DCFG_DESCDMA_EN			BIT(23)
+#define DCFG_EPMISCNT_MASK		(0x1f << 18)
+#define DCFG_EPMISCNT_SHIFT		18
+#define DCFG_EPMISCNT_LIMIT		0x1f
+#define DCFG_EPMISCNT(_x)		((_x) << 18)
+#define DCFG_IPG_ISOC_SUPPORDED		BIT(17)
+#define DCFG_PERFRINT_MASK		(0x3 << 11)
+#define DCFG_PERFRINT_SHIFT		11
+#define DCFG_PERFRINT_LIMIT		0x3
+#define DCFG_PERFRINT(_x)		((_x) << 11)
+#define DCFG_DEVADDR_MASK		(0x7f << 4)
+#define DCFG_DEVADDR_SHIFT		4
+#define DCFG_DEVADDR_LIMIT		0x7f
+#define DCFG_DEVADDR(_x)		((_x) << 4)
+#define DCFG_NZ_STS_OUT_HSHK		BIT(2)
+#define DCFG_DEVSPD_MASK		(0x3 << 0)
+#define DCFG_DEVSPD_SHIFT		0
+#define DCFG_DEVSPD_HS			0
+#define DCFG_DEVSPD_FS			1
+#define DCFG_DEVSPD_LS			2
+#define DCFG_DEVSPD_FS48		3
+
+#define DCTL				HSOTG_REG(0x804)
+#define DCTL_SERVICE_INTERVAL_SUPPORTED BIT(19)
+#define DCTL_PWRONPRGDONE		BIT(11)
+#define DCTL_CGOUTNAK			BIT(10)
+#define DCTL_SGOUTNAK			BIT(9)
+#define DCTL_CGNPINNAK			BIT(8)
+#define DCTL_SGNPINNAK			BIT(7)
+#define DCTL_TSTCTL_MASK		(0x7 << 4)
+#define DCTL_TSTCTL_SHIFT		4
+#define DCTL_GOUTNAKSTS			BIT(3)
+#define DCTL_GNPINNAKSTS		BIT(2)
+#define DCTL_SFTDISCON			BIT(1)
+#define DCTL_RMTWKUPSIG			BIT(0)
+
+#define DSTS				HSOTG_REG(0x808)
+#define DSTS_SOFFN_MASK			(0x3fff << 8)
+#define DSTS_SOFFN_SHIFT		8
+#define DSTS_SOFFN_LIMIT		0x3fff
+#define DSTS_SOFFN(_x)			((_x) << 8)
+#define DSTS_ERRATICERR			BIT(3)
+#define DSTS_ENUMSPD_MASK		(0x3 << 1)
+#define DSTS_ENUMSPD_SHIFT		1
+#define DSTS_ENUMSPD_HS			0
+#define DSTS_ENUMSPD_FS			1
+#define DSTS_ENUMSPD_LS			2
+#define DSTS_ENUMSPD_FS48		3
+#define DSTS_SUSPSTS			BIT(0)
+
+#define DIEPMSK				HSOTG_REG(0x810)
+#define DIEPMSK_NAKMSK			BIT(13)
+#define DIEPMSK_BNAININTRMSK		BIT(9)
+#define DIEPMSK_TXFIFOUNDRNMSK		BIT(8)
+#define DIEPMSK_TXFIFOEMPTY		BIT(7)
+#define DIEPMSK_INEPNAKEFFMSK		BIT(6)
+#define DIEPMSK_INTKNEPMISMSK		BIT(5)
+#define DIEPMSK_INTKNTXFEMPMSK		BIT(4)
+#define DIEPMSK_TIMEOUTMSK		BIT(3)
+#define DIEPMSK_AHBERRMSK		BIT(2)
+#define DIEPMSK_EPDISBLDMSK		BIT(1)
+#define DIEPMSK_XFERCOMPLMSK		BIT(0)
+
+#define DOEPMSK				HSOTG_REG(0x814)
+#define DOEPMSK_BNAMSK			BIT(9)
+#define DOEPMSK_BACK2BACKSETUP		BIT(6)
+#define DOEPMSK_STSPHSERCVDMSK		BIT(5)
+#define DOEPMSK_OUTTKNEPDISMSK		BIT(4)
+#define DOEPMSK_SETUPMSK		BIT(3)
+#define DOEPMSK_AHBERRMSK		BIT(2)
+#define DOEPMSK_EPDISBLDMSK		BIT(1)
+#define DOEPMSK_XFERCOMPLMSK		BIT(0)
+
+#define DAINT				HSOTG_REG(0x818)
+#define DAINTMSK			HSOTG_REG(0x81C)
+#define DAINT_OUTEP_SHIFT		16
+#define DAINT_OUTEP(_x)			(1 << ((_x) + 16))
+#define DAINT_INEP(_x)			(1 << (_x))
+
+#define DTKNQR1				HSOTG_REG(0x820)
+#define DTKNQR2				HSOTG_REG(0x824)
+#define DTKNQR3				HSOTG_REG(0x830)
+#define DTKNQR4				HSOTG_REG(0x834)
+#define DIEPEMPMSK			HSOTG_REG(0x834)
+
+#define DVBUSDIS			HSOTG_REG(0x828)
+#define DVBUSPULSE			HSOTG_REG(0x82C)
+
+#define DIEPCTL0			HSOTG_REG(0x900)
+#define DIEPCTL(_a)			HSOTG_REG(0x900 + ((_a) * 0x20))
+
+#define DOEPCTL0			HSOTG_REG(0xB00)
+#define DOEPCTL(_a)			HSOTG_REG(0xB00 + ((_a) * 0x20))
+
+/* EP0 specialness:
+ * bits[29..28] - reserved (no SetD0PID, SetD1PID)
+ * bits[25..22] - should always be zero, this isn't a periodic endpoint
+ * bits[10..0]  - MPS setting different for EP0
+ */
+#define D0EPCTL_MPS_MASK		(0x3 << 0)
+#define D0EPCTL_MPS_SHIFT		0
+#define D0EPCTL_MPS_64			0
+#define D0EPCTL_MPS_32			1
+#define D0EPCTL_MPS_16			2
+#define D0EPCTL_MPS_8			3
+
+#define DXEPCTL_EPENA			BIT(31)
+#define DXEPCTL_EPDIS			BIT(30)
+#define DXEPCTL_SETD1PID		BIT(29)
+#define DXEPCTL_SETODDFR		BIT(29)
+#define DXEPCTL_SETD0PID		BIT(28)
+#define DXEPCTL_SETEVENFR		BIT(28)
+#define DXEPCTL_SNAK			BIT(27)
+#define DXEPCTL_CNAK			BIT(26)
+#define DXEPCTL_TXFNUM_MASK		(0xf << 22)
+#define DXEPCTL_TXFNUM_SHIFT		22
+#define DXEPCTL_TXFNUM_LIMIT		0xf
+#define DXEPCTL_TXFNUM(_x)		((_x) << 22)
+#define DXEPCTL_STALL			BIT(21)
+#define DXEPCTL_SNP			BIT(20)
+#define DXEPCTL_EPTYPE_MASK		(0x3 << 18)
+#define DXEPCTL_EPTYPE_CONTROL		(0x0 << 18)
+#define DXEPCTL_EPTYPE_ISO		(0x1 << 18)
+#define DXEPCTL_EPTYPE_BULK		(0x2 << 18)
+#define DXEPCTL_EPTYPE_INTERRUPT	(0x3 << 18)
+
+#define DXEPCTL_NAKSTS			BIT(17)
+#define DXEPCTL_DPID			BIT(16)
+#define DXEPCTL_EOFRNUM			BIT(16)
+#define DXEPCTL_USBACTEP		BIT(15)
+#define DXEPCTL_NEXTEP_MASK		(0xf << 11)
+#define DXEPCTL_NEXTEP_SHIFT		11
+#define DXEPCTL_NEXTEP_LIMIT		0xf
+#define DXEPCTL_NEXTEP(_x)		((_x) << 11)
+#define DXEPCTL_MPS_MASK		(0x7ff << 0)
+#define DXEPCTL_MPS_SHIFT		0
+#define DXEPCTL_MPS_LIMIT		0x7ff
+#define DXEPCTL_MPS(_x)			((_x) << 0)
+
+#define DIEPINT(_a)			HSOTG_REG(0x908 + ((_a) * 0x20))
+#define DOEPINT(_a)			HSOTG_REG(0xB08 + ((_a) * 0x20))
+#define DXEPINT_SETUP_RCVD		BIT(15)
+#define DXEPINT_NYETINTRPT		BIT(14)
+#define DXEPINT_NAKINTRPT		BIT(13)
+#define DXEPINT_BBLEERRINTRPT		BIT(12)
+#define DXEPINT_PKTDRPSTS		BIT(11)
+#define DXEPINT_BNAINTR			BIT(9)
+#define DXEPINT_TXFIFOUNDRN		BIT(8)
+#define DXEPINT_OUTPKTERR		BIT(8)
+#define DXEPINT_TXFEMP			BIT(7)
+#define DXEPINT_INEPNAKEFF		BIT(6)
+#define DXEPINT_BACK2BACKSETUP		BIT(6)
+#define DXEPINT_INTKNEPMIS		BIT(5)
+#define DXEPINT_STSPHSERCVD		BIT(5)
+#define DXEPINT_INTKNTXFEMP		BIT(4)
+#define DXEPINT_OUTTKNEPDIS		BIT(4)
+#define DXEPINT_TIMEOUT			BIT(3)
+#define DXEPINT_SETUP			BIT(3)
+#define DXEPINT_AHBERR			BIT(2)
+#define DXEPINT_EPDISBLD		BIT(1)
+#define DXEPINT_XFERCOMPL		BIT(0)
+
+#define DIEPTSIZ0			HSOTG_REG(0x910)
+#define DIEPTSIZ0_PKTCNT_MASK		(0x3 << 19)
+#define DIEPTSIZ0_PKTCNT_SHIFT		19
+#define DIEPTSIZ0_PKTCNT_LIMIT		0x3
+#define DIEPTSIZ0_PKTCNT(_x)		((_x) << 19)
+#define DIEPTSIZ0_XFERSIZE_MASK		(0x7f << 0)
+#define DIEPTSIZ0_XFERSIZE_SHIFT	0
+#define DIEPTSIZ0_XFERSIZE_LIMIT	0x7f
+#define DIEPTSIZ0_XFERSIZE(_x)		((_x) << 0)
+
+#define DOEPTSIZ0			HSOTG_REG(0xB10)
+#define DOEPTSIZ0_SUPCNT_MASK		(0x3 << 29)
+#define DOEPTSIZ0_SUPCNT_SHIFT		29
+#define DOEPTSIZ0_SUPCNT_LIMIT		0x3
+#define DOEPTSIZ0_SUPCNT(_x)		((_x) << 29)
+#define DOEPTSIZ0_PKTCNT		BIT(19)
+#define DOEPTSIZ0_XFERSIZE_MASK		(0x7f << 0)
+#define DOEPTSIZ0_XFERSIZE_SHIFT	0
+
+#define DIEPTSIZ(_a)			HSOTG_REG(0x910 + ((_a) * 0x20))
+#define DOEPTSIZ(_a)			HSOTG_REG(0xB10 + ((_a) * 0x20))
+#define DXEPTSIZ_MC_MASK		(0x3 << 29)
+#define DXEPTSIZ_MC_SHIFT		29
+#define DXEPTSIZ_MC_LIMIT		0x3
+#define DXEPTSIZ_MC(_x)			((_x) << 29)
+#define DXEPTSIZ_PKTCNT_MASK		(0x3ff << 19)
+#define DXEPTSIZ_PKTCNT_SHIFT		19
+#define DXEPTSIZ_PKTCNT_LIMIT		0x3ff
+#define DXEPTSIZ_PKTCNT_GET(_v)		(((_v) >> 19) & 0x3ff)
+#define DXEPTSIZ_PKTCNT(_x)		((_x) << 19)
+#define DXEPTSIZ_XFERSIZE_MASK		(0x7ffff << 0)
+#define DXEPTSIZ_XFERSIZE_SHIFT		0
+#define DXEPTSIZ_XFERSIZE_LIMIT		0x7ffff
+#define DXEPTSIZ_XFERSIZE_GET(_v)	(((_v) >> 0) & 0x7ffff)
+#define DXEPTSIZ_XFERSIZE(_x)		((_x) << 0)
+
+#define DIEPDMA(_a)			HSOTG_REG(0x914 + ((_a) * 0x20))
+#define DOEPDMA(_a)			HSOTG_REG(0xB14 + ((_a) * 0x20))
+
+#define DTXFSTS(_a)			HSOTG_REG(0x918 + ((_a) * 0x20))
+
+#define PCGCTL				HSOTG_REG(0x0e00)
+#define PCGCTL_IF_DEV_MODE		BIT(31)
+#define PCGCTL_P2HD_PRT_SPD_MASK	(0x3 << 29)
+#define PCGCTL_P2HD_PRT_SPD_SHIFT	29
+#define PCGCTL_P2HD_DEV_ENUM_SPD_MASK	(0x3 << 27)
+#define PCGCTL_P2HD_DEV_ENUM_SPD_SHIFT	27
+#define PCGCTL_MAC_DEV_ADDR_MASK	(0x7f << 20)
+#define PCGCTL_MAC_DEV_ADDR_SHIFT	20
+#define PCGCTL_MAX_TERMSEL		BIT(19)
+#define PCGCTL_MAX_XCVRSELECT_MASK	(0x3 << 17)
+#define PCGCTL_MAX_XCVRSELECT_SHIFT	17
+#define PCGCTL_PORT_POWER		BIT(16)
+#define PCGCTL_PRT_CLK_SEL_MASK		(0x3 << 14)
+#define PCGCTL_PRT_CLK_SEL_SHIFT	14
+#define PCGCTL_ESS_REG_RESTORED		BIT(13)
+#define PCGCTL_EXTND_HIBER_SWITCH	BIT(12)
+#define PCGCTL_EXTND_HIBER_PWRCLMP	BIT(11)
+#define PCGCTL_ENBL_EXTND_HIBER		BIT(10)
+#define PCGCTL_RESTOREMODE		BIT(9)
+#define PCGCTL_RESETAFTSUSP		BIT(8)
+#define PCGCTL_DEEP_SLEEP		BIT(7)
+#define PCGCTL_PHY_IN_SLEEP		BIT(6)
+#define PCGCTL_ENBL_SLEEP_GATING	BIT(5)
+#define PCGCTL_RSTPDWNMODULE		BIT(3)
+#define PCGCTL_PWRCLMP			BIT(2)
+#define PCGCTL_GATEHCLK			BIT(1)
+#define PCGCTL_STOPPCLK			BIT(0)
+
+#define PCGCCTL1                        HSOTG_REG(0xe04)
+#define PCGCCTL1_TIMER                  (0x3 << 1)
+#define PCGCCTL1_GATEEN                 BIT(0)
+
+#define EPFIFO(_a)			HSOTG_REG(0x1000 + ((_a) * 0x1000))
+
+/* Host Mode Registers */
+
+#define HCFG				HSOTG_REG(0x0400)
+#define HCFG_MODECHTIMEN		BIT(31)
+#define HCFG_PERSCHEDENA		BIT(26)
+#define HCFG_FRLISTEN_MASK		(0x3 << 24)
+#define HCFG_FRLISTEN_SHIFT		24
+#define HCFG_FRLISTEN_8				(0 << 24)
+#define FRLISTEN_8_SIZE				8
+#define HCFG_FRLISTEN_16			BIT(24)
+#define FRLISTEN_16_SIZE			16
+#define HCFG_FRLISTEN_32			(2 << 24)
+#define FRLISTEN_32_SIZE			32
+#define HCFG_FRLISTEN_64			(3 << 24)
+#define FRLISTEN_64_SIZE			64
+#define HCFG_DESCDMA			BIT(23)
+#define HCFG_RESVALID_MASK		(0xff << 8)
+#define HCFG_RESVALID_SHIFT		8
+#define HCFG_ENA32KHZ			BIT(7)
+#define HCFG_FSLSSUPP			BIT(2)
+#define HCFG_FSLSPCLKSEL_MASK		(0x3 << 0)
+#define HCFG_FSLSPCLKSEL_SHIFT		0
+#define HCFG_FSLSPCLKSEL_30_60_MHZ	0
+#define HCFG_FSLSPCLKSEL_48_MHZ		1
+#define HCFG_FSLSPCLKSEL_6_MHZ		2
+
+#define HFIR				HSOTG_REG(0x0404)
+#define HFIR_FRINT_MASK			(0xffff << 0)
+#define HFIR_FRINT_SHIFT		0
+#define HFIR_RLDCTRL			BIT(16)
+
+#define HFNUM				HSOTG_REG(0x0408)
+#define HFNUM_FRREM_MASK		(0xffff << 16)
+#define HFNUM_FRREM_SHIFT		16
+#define HFNUM_FRNUM_MASK		(0xffff << 0)
+#define HFNUM_FRNUM_SHIFT		0
+#define HFNUM_MAX_FRNUM			0x3fff
+
+#define HPTXSTS				HSOTG_REG(0x0410)
+#define TXSTS_QTOP_ODD			BIT(31)
+#define TXSTS_QTOP_CHNEP_MASK		(0xf << 27)
+#define TXSTS_QTOP_CHNEP_SHIFT		27
+#define TXSTS_QTOP_TOKEN_MASK		(0x3 << 25)
+#define TXSTS_QTOP_TOKEN_SHIFT		25
+#define TXSTS_QTOP_TERMINATE		BIT(24)
+#define TXSTS_QSPCAVAIL_MASK		(0x7f << 16)
+#define TXSTS_QSPCAVAIL_SHIFT		16
+#define TXSTS_FSPCAVAIL_MASK		(0xffff << 0)
+#define TXSTS_FSPCAVAIL_SHIFT		0
+
+#define HAINT				HSOTG_REG(0x0414)
+#define HAINTMSK			HSOTG_REG(0x0418)
+#define HFLBADDR			HSOTG_REG(0x041c)
+
+#define HPRT0				HSOTG_REG(0x0440)
+#define HPRT0_SPD_MASK			(0x3 << 17)
+#define HPRT0_SPD_SHIFT			17
+#define HPRT0_SPD_HIGH_SPEED		0
+#define HPRT0_SPD_FULL_SPEED		1
+#define HPRT0_SPD_LOW_SPEED		2
+#define HPRT0_TSTCTL_MASK		(0xf << 13)
+#define HPRT0_TSTCTL_SHIFT		13
+#define HPRT0_PWR			BIT(12)
+#define HPRT0_LNSTS_MASK		(0x3 << 10)
+#define HPRT0_LNSTS_SHIFT		10
+#define HPRT0_RST			BIT(8)
+#define HPRT0_SUSP			BIT(7)
+#define HPRT0_RES			BIT(6)
+#define HPRT0_OVRCURRCHG		BIT(5)
+#define HPRT0_OVRCURRACT		BIT(4)
+#define HPRT0_ENACHG			BIT(3)
+#define HPRT0_ENA			BIT(2)
+#define HPRT0_CONNDET			BIT(1)
+#define HPRT0_CONNSTS			BIT(0)
+
+#define HCCHAR(_ch)			HSOTG_REG(0x0500 + 0x20 * (_ch))
+#define HCCHAR_CHENA			BIT(31)
+#define HCCHAR_CHDIS			BIT(30)
+#define HCCHAR_ODDFRM			BIT(29)
+#define HCCHAR_DEVADDR_MASK		(0x7f << 22)
+#define HCCHAR_DEVADDR_SHIFT		22
+#define HCCHAR_MULTICNT_MASK		(0x3 << 20)
+#define HCCHAR_MULTICNT_SHIFT		20
+#define HCCHAR_EPTYPE_MASK		(0x3 << 18)
+#define HCCHAR_EPTYPE_SHIFT		18
+#define HCCHAR_LSPDDEV			BIT(17)
+#define HCCHAR_EPDIR			BIT(15)
+#define HCCHAR_EPNUM_MASK		(0xf << 11)
+#define HCCHAR_EPNUM_SHIFT		11
+#define HCCHAR_MPS_MASK			(0x7ff << 0)
+#define HCCHAR_MPS_SHIFT		0
+
+#define HCSPLT(_ch)			HSOTG_REG(0x0504 + 0x20 * (_ch))
+#define HCSPLT_SPLTENA			BIT(31)
+#define HCSPLT_COMPSPLT			BIT(16)
+#define HCSPLT_XACTPOS_MASK		(0x3 << 14)
+#define HCSPLT_XACTPOS_SHIFT		14
+#define HCSPLT_XACTPOS_MID		0
+#define HCSPLT_XACTPOS_END		1
+#define HCSPLT_XACTPOS_BEGIN		2
+#define HCSPLT_XACTPOS_ALL		3
+#define HCSPLT_HUBADDR_MASK		(0x7f << 7)
+#define HCSPLT_HUBADDR_SHIFT		7
+#define HCSPLT_PRTADDR_MASK		(0x7f << 0)
+#define HCSPLT_PRTADDR_SHIFT		0
+
+#define HCINT(_ch)			HSOTG_REG(0x0508 + 0x20 * (_ch))
+#define HCINTMSK(_ch)			HSOTG_REG(0x050c + 0x20 * (_ch))
+#define HCINTMSK_RESERVED14_31		(0x3ffff << 14)
+#define HCINTMSK_FRM_LIST_ROLL		BIT(13)
+#define HCINTMSK_XCS_XACT		BIT(12)
+#define HCINTMSK_BNA			BIT(11)
+#define HCINTMSK_DATATGLERR		BIT(10)
+#define HCINTMSK_FRMOVRUN		BIT(9)
+#define HCINTMSK_BBLERR			BIT(8)
+#define HCINTMSK_XACTERR		BIT(7)
+#define HCINTMSK_NYET			BIT(6)
+#define HCINTMSK_ACK			BIT(5)
+#define HCINTMSK_NAK			BIT(4)
+#define HCINTMSK_STALL			BIT(3)
+#define HCINTMSK_AHBERR			BIT(2)
+#define HCINTMSK_CHHLTD			BIT(1)
+#define HCINTMSK_XFERCOMPL		BIT(0)
+
+#define HCTSIZ(_ch)			HSOTG_REG(0x0510 + 0x20 * (_ch))
+#define TSIZ_DOPNG			BIT(31)
+#define TSIZ_SC_MC_PID_MASK		(0x3 << 29)
+#define TSIZ_SC_MC_PID_SHIFT		29
+#define TSIZ_SC_MC_PID_DATA0		0
+#define TSIZ_SC_MC_PID_DATA2		1
+#define TSIZ_SC_MC_PID_DATA1		2
+#define TSIZ_SC_MC_PID_MDATA		3
+#define TSIZ_SC_MC_PID_SETUP		3
+#define TSIZ_PKTCNT_MASK		(0x3ff << 19)
+#define TSIZ_PKTCNT_SHIFT		19
+#define TSIZ_NTD_MASK			(0xff << 8)
+#define TSIZ_NTD_SHIFT			8
+#define TSIZ_SCHINFO_MASK		(0xff << 0)
+#define TSIZ_SCHINFO_SHIFT		0
+#define TSIZ_XFERSIZE_MASK		(0x7ffff << 0)
+#define TSIZ_XFERSIZE_SHIFT		0
+
+#define HCDMA(_ch)			HSOTG_REG(0x0514 + 0x20 * (_ch))
+
+#define HCDMAB(_ch)			HSOTG_REG(0x051c + 0x20 * (_ch))
+
+#define HCFIFO(_ch)			HSOTG_REG(0x1000 + 0x1000 * (_ch))
+
+/**
+ * struct dwc2_dma_desc - DMA descriptor structure,
+ * used for both host and gadget modes
+ *
+ * @status: DMA descriptor status quadlet
+ * @buf:    DMA descriptor data buffer pointer
+ *
+ * DMA Descriptor structure contains two quadlets:
+ * Status quadlet and Data buffer pointer.
+ */
+struct dwc2_dma_desc {
+	u32 status;
+	u32 buf;
+} __packed;
+
+/* Host Mode DMA descriptor status quadlet */
+
+#define HOST_DMA_A			BIT(31)
+#define HOST_DMA_STS_MASK		(0x3 << 28)
+#define HOST_DMA_STS_SHIFT		28
+#define HOST_DMA_STS_PKTERR		BIT(28)
+#define HOST_DMA_EOL			BIT(26)
+#define HOST_DMA_IOC			BIT(25)
+#define HOST_DMA_SUP			BIT(24)
+#define HOST_DMA_ALT_QTD		BIT(23)
+#define HOST_DMA_QTD_OFFSET_MASK	(0x3f << 17)
+#define HOST_DMA_QTD_OFFSET_SHIFT	17
+#define HOST_DMA_ISOC_NBYTES_MASK	(0xfff << 0)
+#define HOST_DMA_ISOC_NBYTES_SHIFT	0
+#define HOST_DMA_NBYTES_MASK		(0x1ffff << 0)
+#define HOST_DMA_NBYTES_SHIFT		0
+#define HOST_DMA_NBYTES_LIMIT		131071
+
+/* Device Mode DMA descriptor status quadlet */
+
+#define DEV_DMA_BUFF_STS_MASK		(0x3 << 30)
+#define DEV_DMA_BUFF_STS_SHIFT		30
+#define DEV_DMA_BUFF_STS_HREADY		0
+#define DEV_DMA_BUFF_STS_DMABUSY	1
+#define DEV_DMA_BUFF_STS_DMADONE	2
+#define DEV_DMA_BUFF_STS_HBUSY		3
+#define DEV_DMA_STS_MASK		(0x3 << 28)
+#define DEV_DMA_STS_SHIFT		28
+#define DEV_DMA_STS_SUCC		0
+#define DEV_DMA_STS_BUFF_FLUSH		1
+#define DEV_DMA_STS_BUFF_ERR		3
+#define DEV_DMA_L			BIT(27)
+#define DEV_DMA_SHORT			BIT(26)
+#define DEV_DMA_IOC			BIT(25)
+#define DEV_DMA_SR			BIT(24)
+#define DEV_DMA_MTRF			BIT(23)
+#define DEV_DMA_ISOC_PID_MASK		(0x3 << 23)
+#define DEV_DMA_ISOC_PID_SHIFT		23
+#define DEV_DMA_ISOC_PID_DATA0		0
+#define DEV_DMA_ISOC_PID_DATA2		1
+#define DEV_DMA_ISOC_PID_DATA1		2
+#define DEV_DMA_ISOC_PID_MDATA		3
+#define DEV_DMA_ISOC_FRNUM_MASK		(0x7ff << 12)
+#define DEV_DMA_ISOC_FRNUM_SHIFT	12
+#define DEV_DMA_ISOC_TX_NBYTES_MASK	(0xfff << 0)
+#define DEV_DMA_ISOC_TX_NBYTES_LIMIT	0xfff
+#define DEV_DMA_ISOC_RX_NBYTES_MASK	(0x7ff << 0)
+#define DEV_DMA_ISOC_RX_NBYTES_LIMIT	0x7ff
+#define DEV_DMA_ISOC_NBYTES_SHIFT	0
+#define DEV_DMA_NBYTES_MASK		(0xffff << 0)
+#define DEV_DMA_NBYTES_SHIFT		0
+#define DEV_DMA_NBYTES_LIMIT		0xffff
+
+#define MAX_DMA_DESC_NUM_GENERIC	64
+#define MAX_DMA_DESC_NUM_HS_ISOC	256
+
+#endif /* __DWC2_HW_H__ */

linux-7.2.3/drivers/usb/dwc2/pci.c

@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * pci.c - DesignWare HS OTG Controller PCI driver
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ */
+
+/*
+ * Provides the initialization and cleanup entry points for the DWC_otg PCI
+ * driver
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+#include <linux/platform_device.h>
+#include <linux/usb/usb_phy_generic.h>
+
+#include "core.h"
+
+static const char dwc2_driver_name[] = "dwc2-pci";
+
+struct dwc2_pci_glue {
+	struct platform_device *dwc2;
+	struct platform_device *phy;
+};
+
+/**
+ * dwc2_pci_remove() - Provides the cleanup entry points for the DWC_otg PCI
+ * driver
+ *
+ * @pci: The programming view of DWC_otg PCI
+ */
+static void dwc2_pci_remove(struct pci_dev *pci)
+{
+	struct dwc2_pci_glue *glue = pci_get_drvdata(pci);
+
+	platform_device_unregister(glue->dwc2);
+	usb_phy_generic_unregister(glue->phy);
+	pci_set_drvdata(pci, NULL);
+}
+
+static int dwc2_pci_probe(struct pci_dev *pci,
+			  const struct pci_device_id *id)
+{
+	struct resource		res[2];
+	struct platform_device	*dwc2;
+	struct platform_device	*phy;
+	int			ret;
+	struct device		*dev = &pci->dev;
+	struct dwc2_pci_glue	*glue;
+
+	ret = pcim_enable_device(pci);
+	if (ret) {
+		dev_err(dev, "failed to enable pci device\n");
+		return -ENODEV;
+	}
+
+	pci_set_master(pci);
+
+	phy = usb_phy_generic_register();
+	if (IS_ERR(phy)) {
+		dev_err(dev, "error registering generic PHY (%ld)\n",
+			PTR_ERR(phy));
+		return PTR_ERR(phy);
+	}
+
+	dwc2 = platform_device_alloc("dwc2", PLATFORM_DEVID_AUTO);
+	if (!dwc2) {
+		dev_err(dev, "couldn't allocate dwc2 device\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
+
+	res[0].start	= pci_resource_start(pci, 0);
+	res[0].end	= pci_resource_end(pci, 0);
+	res[0].name	= "dwc2";
+	res[0].flags	= IORESOURCE_MEM;
+
+	res[1].start	= pci->irq;
+	res[1].name	= "dwc2";
+	res[1].flags	= IORESOURCE_IRQ;
+
+	ret = platform_device_add_resources(dwc2, res, ARRAY_SIZE(res));
+	if (ret) {
+		dev_err(dev, "couldn't add resources to dwc2 device\n");
+		goto err;
+	}
+
+	dwc2->dev.parent = dev;
+
+	glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = platform_device_add(dwc2);
+	if (ret) {
+		dev_err(dev, "failed to register dwc2 device\n");
+		goto err;
+	}
+
+	glue->phy = phy;
+	glue->dwc2 = dwc2;
+	pci_set_drvdata(pci, glue);
+
+	return 0;
+err:
+	usb_phy_generic_unregister(phy);
+	platform_device_put(dwc2);
+	return ret;
+}
+
+static struct pci_driver dwc2_pci_driver = {
+	.name = dwc2_driver_name,
+	.id_table = dwc2_pci_ids,
+	.probe = dwc2_pci_probe,
+	.remove = dwc2_pci_remove,
+};
+
+module_pci_driver(dwc2_pci_driver);
+
+MODULE_DESCRIPTION("DESIGNWARE HS OTG PCI Bus Glue");
+MODULE_AUTHOR("Synopsys, Inc.");
+MODULE_LICENSE("Dual BSD/GPL");

linux-7.2.3/drivers/usb/dwc2/platform.c

@@ -0,0 +1,811 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * platform.c - DesignWare HS OTG Controller platform driver
+ *
+ * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/of.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_data/s3c-hsotg.h>
+#include <linux/reset.h>
+
+#include <linux/usb/of.h>
+
+#include "core.h"
+#include "hcd.h"
+#include "debug.h"
+
+static const char dwc2_driver_name[] = "dwc2";
+
+/*
+ * Check the dr_mode against the module configuration and hardware
+ * capabilities.
+ *
+ * The hardware, module, and dr_mode, can each be set to host, device,
+ * or otg. Check that all these values are compatible and adjust the
+ * value of dr_mode if possible.
+ *
+ *                      actual
+ *    HW  MOD dr_mode   dr_mode
+ *  ------------------------------
+ *   HST  HST  any    :  HST
+ *   HST  DEV  any    :  ---
+ *   HST  OTG  any    :  HST
+ *
+ *   DEV  HST  any    :  ---
+ *   DEV  DEV  any    :  DEV
+ *   DEV  OTG  any    :  DEV
+ *
+ *   OTG  HST  any    :  HST
+ *   OTG  DEV  any    :  DEV
+ *   OTG  OTG  any    :  dr_mode
+ */
+static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
+{
+	enum usb_dr_mode mode;
+
+	hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
+	if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
+		hsotg->dr_mode = USB_DR_MODE_OTG;
+
+	mode = hsotg->dr_mode;
+
+	if (dwc2_hw_is_device(hsotg)) {
+		if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
+			dev_err(hsotg->dev,
+				"Controller does not support host mode.\n");
+			return -EINVAL;
+		}
+		mode = USB_DR_MODE_PERIPHERAL;
+	} else if (dwc2_hw_is_host(hsotg)) {
+		if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
+			dev_err(hsotg->dev,
+				"Controller does not support device mode.\n");
+			return -EINVAL;
+		}
+		mode = USB_DR_MODE_HOST;
+	} else {
+		if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
+			mode = USB_DR_MODE_HOST;
+		else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
+			mode = USB_DR_MODE_PERIPHERAL;
+	}
+
+	if (mode != hsotg->dr_mode) {
+		dev_warn(hsotg->dev,
+			 "Configuration mismatch. dr_mode forced to %s\n",
+			mode == USB_DR_MODE_HOST ? "host" : "device");
+
+		hsotg->dr_mode = mode;
+	}
+
+	return 0;
+}
+
+static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
+{
+	struct platform_device *pdev = to_platform_device(hsotg->dev);
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
+				    hsotg->supplies);
+	if (ret)
+		return ret;
+
+	if (hsotg->utmi_clk) {
+		ret = clk_prepare_enable(hsotg->utmi_clk);
+		if (ret)
+			goto err_dis_reg;
+	}
+
+	if (hsotg->clk) {
+		ret = clk_prepare_enable(hsotg->clk);
+		if (ret)
+			goto err_dis_utmi_clk;
+	}
+
+	if (hsotg->uphy) {
+		ret = usb_phy_init(hsotg->uphy);
+	} else if (hsotg->plat && hsotg->plat->phy_init) {
+		ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
+	} else {
+		ret = phy_init(hsotg->phy);
+		if (ret == 0) {
+			ret = phy_power_on(hsotg->phy);
+			if (ret)
+				phy_exit(hsotg->phy);
+		}
+	}
+
+	if (ret)
+		goto err_dis_clk;
+
+	return 0;
+
+err_dis_clk:
+	if (hsotg->clk)
+		clk_disable_unprepare(hsotg->clk);
+
+err_dis_utmi_clk:
+	if (hsotg->utmi_clk)
+		clk_disable_unprepare(hsotg->utmi_clk);
+
+err_dis_reg:
+	regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
+
+	return ret;
+}
+
+/**
+ * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
+ * @hsotg: The driver state
+ *
+ * A wrapper for platform code responsible for controlling
+ * low-level USB platform resources (phy, clock, regulators)
+ */
+int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
+{
+	int ret = __dwc2_lowlevel_hw_enable(hsotg);
+
+	if (ret == 0)
+		hsotg->ll_hw_enabled = true;
+	return ret;
+}
+
+static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
+{
+	struct platform_device *pdev = to_platform_device(hsotg->dev);
+	int ret = 0;
+
+	if (hsotg->uphy) {
+		usb_phy_shutdown(hsotg->uphy);
+	} else if (hsotg->plat && hsotg->plat->phy_exit) {
+		ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
+	} else {
+		ret = phy_power_off(hsotg->phy);
+		if (ret == 0)
+			ret = phy_exit(hsotg->phy);
+	}
+	if (ret)
+		return ret;
+
+	if (hsotg->clk)
+		clk_disable_unprepare(hsotg->clk);
+
+	if (hsotg->utmi_clk)
+		clk_disable_unprepare(hsotg->utmi_clk);
+
+	return regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
+}
+
+/**
+ * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
+ * @hsotg: The driver state
+ *
+ * A wrapper for platform code responsible for controlling
+ * low-level USB platform resources (phy, clock, regulators)
+ */
+int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
+{
+	int ret = __dwc2_lowlevel_hw_disable(hsotg);
+
+	if (ret == 0)
+		hsotg->ll_hw_enabled = false;
+	return ret;
+}
+
+static void dwc2_reset_control_assert(void *data)
+{
+	reset_control_assert(data);
+}
+
+static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
+{
+	int i, ret;
+
+	hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
+	if (IS_ERR(hsotg->reset))
+		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset),
+				     "error getting reset control\n");
+
+	reset_control_deassert(hsotg->reset);
+	ret = devm_add_action_or_reset(hsotg->dev, dwc2_reset_control_assert,
+				       hsotg->reset);
+	if (ret)
+		return ret;
+
+	hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
+	if (IS_ERR(hsotg->reset_ecc))
+		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset_ecc),
+				     "error getting reset control for ecc\n");
+
+	reset_control_deassert(hsotg->reset_ecc);
+	ret = devm_add_action_or_reset(hsotg->dev, dwc2_reset_control_assert,
+				       hsotg->reset_ecc);
+	if (ret)
+		return ret;
+
+	/*
+	 * Attempt to find a generic PHY, then look for an old style
+	 * USB PHY and then fall back to pdata
+	 */
+	hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
+	if (IS_ERR(hsotg->phy)) {
+		ret = PTR_ERR(hsotg->phy);
+		switch (ret) {
+		case -ENODEV:
+		case -ENOSYS:
+			hsotg->phy = NULL;
+			break;
+		default:
+			return dev_err_probe(hsotg->dev, ret, "error getting phy\n");
+		}
+	}
+
+	if (!hsotg->phy) {
+		hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
+		if (IS_ERR(hsotg->uphy)) {
+			ret = PTR_ERR(hsotg->uphy);
+			switch (ret) {
+			case -ENODEV:
+			case -ENXIO:
+				hsotg->uphy = NULL;
+				break;
+			default:
+				return dev_err_probe(hsotg->dev, ret, "error getting usb phy\n");
+			}
+		}
+	}
+
+	hsotg->plat = dev_get_platdata(hsotg->dev);
+
+	/* Clock */
+	hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg");
+	if (IS_ERR(hsotg->clk))
+		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->clk), "cannot get otg clock\n");
+
+	hsotg->utmi_clk = devm_clk_get_optional(hsotg->dev, "utmi");
+	if (IS_ERR(hsotg->utmi_clk))
+		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->utmi_clk),
+				     "cannot get utmi clock\n");
+
+	/* Regulators */
+	for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
+		hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
+
+	ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
+				      hsotg->supplies);
+	if (ret)
+		return dev_err_probe(hsotg->dev, ret, "failed to request supplies\n");
+
+	return 0;
+}
+
+/**
+ * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
+ * DWC_otg driver
+ *
+ * @dev: Platform device
+ *
+ * This routine is called, for example, when the rmmod command is executed. The
+ * device may or may not be electrically present. If it is present, the driver
+ * stops device processing. Any resources used on behalf of this device are
+ * freed.
+ */
+static void dwc2_driver_remove(struct platform_device *dev)
+{
+	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
+	struct dwc2_gregs_backup *gr;
+	int ret = 0;
+
+	gr = &hsotg->gr_backup;
+
+	/* Exit Hibernation when driver is removed. */
+	if (hsotg->hibernated) {
+		if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
+			ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
+		else
+			ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
+
+		if (ret)
+			dev_err(hsotg->dev,
+				"exit hibernation failed.\n");
+	}
+
+	/* Exit Partial Power Down when driver is removed. */
+	if (hsotg->in_ppd) {
+		ret = dwc2_exit_partial_power_down(hsotg, 0, true);
+		if (ret)
+			dev_err(hsotg->dev,
+				"exit partial_power_down failed\n");
+	}
+
+	/* Exit clock gating when driver is removed. */
+	if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE &&
+	    hsotg->bus_suspended && !hsotg->params.no_clock_gating) {
+		if (dwc2_is_device_mode(hsotg))
+			dwc2_gadget_exit_clock_gating(hsotg, 0);
+		else
+			dwc2_host_exit_clock_gating(hsotg, 0);
+	}
+
+	dwc2_debugfs_exit(hsotg);
+	if (hsotg->hcd_enabled)
+		dwc2_hcd_remove(hsotg);
+	if (hsotg->gadget_enabled)
+		dwc2_hsotg_remove(hsotg);
+
+	dwc2_drd_exit(hsotg);
+
+	if (hsotg->params.activate_stm_id_vb_detection)
+		regulator_disable(hsotg->usb33d);
+
+	if (hsotg->ll_hw_enabled)
+		dwc2_lowlevel_hw_disable(hsotg);
+}
+
+/**
+ * dwc2_driver_shutdown() - Called on device shutdown
+ *
+ * @dev: Platform device
+ *
+ * In specific conditions (involving usb hubs) dwc2 devices can create a
+ * lot of interrupts, even to the point of overwhelming devices running
+ * at low frequencies. Some devices need to do special clock handling
+ * at shutdown-time which may bring the system clock below the threshold
+ * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
+ * prevents reboots/poweroffs from getting stuck in such cases.
+ */
+static void dwc2_driver_shutdown(struct platform_device *dev)
+{
+	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
+
+	if (hsotg->ll_hw_enabled) {
+		dwc2_disable_global_interrupts(hsotg);
+		synchronize_irq(hsotg->irq);
+		dwc2_lowlevel_hw_disable(hsotg);
+	}
+}
+
+/**
+ * dwc2_check_core_endianness() - Returns true if core and AHB have
+ * opposite endianness.
+ * @hsotg:	Programming view of the DWC_otg controller.
+ */
+static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg)
+{
+	u32 snpsid;
+
+	snpsid = ioread32(hsotg->regs + GSNPSID);
+	if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID ||
+	    (snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID ||
+	    (snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID)
+		return false;
+	return true;
+}
+
+/**
+ * dwc2_check_core_version() - Check core version
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ */
+int dwc2_check_core_version(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+
+	/*
+	 * Attempt to ensure this device is really a DWC_otg Controller.
+	 * Read and verify the GSNPSID register contents. The value should be
+	 * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx
+	 */
+
+	hw->snpsid = dwc2_readl(hsotg, GSNPSID);
+	if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID &&
+	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID &&
+	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) {
+		dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
+			hw->snpsid);
+		return -ENODEV;
+	}
+
+	dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n",
+		hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
+		hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
+	return 0;
+}
+
+/**
+ * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
+ * driver
+ *
+ * @dev: Platform device
+ *
+ * This routine creates the driver components required to control the device
+ * (core, HCD, and PCD) and initializes the device. The driver components are
+ * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
+ * in the device private data. This allows the driver to access the dwc2_hsotg
+ * structure on subsequent calls to driver methods for this device.
+ */
+static int dwc2_driver_probe(struct platform_device *dev)
+{
+	struct dwc2_hsotg *hsotg;
+	struct resource *res;
+	int retval;
+
+	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
+	if (!hsotg)
+		return -ENOMEM;
+
+	hsotg->dev = &dev->dev;
+
+	/*
+	 * Use reasonable defaults so platforms don't have to provide these.
+	 */
+	if (!dev->dev.dma_mask)
+		dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
+	retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
+	if (retval) {
+		dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval);
+		return retval;
+	}
+
+	hsotg->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res);
+	if (IS_ERR(hsotg->regs))
+		return PTR_ERR(hsotg->regs);
+
+	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
+		(unsigned long)res->start, hsotg->regs);
+
+	retval = dwc2_lowlevel_hw_init(hsotg);
+	if (retval)
+		return retval;
+
+	spin_lock_init(&hsotg->lock);
+
+	hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
+	if (IS_ERR(hsotg->vbus_supply)) {
+		retval = PTR_ERR(hsotg->vbus_supply);
+		hsotg->vbus_supply = NULL;
+		if (retval != -ENODEV)
+			return retval;
+	}
+
+	retval = dwc2_lowlevel_hw_enable(hsotg);
+	if (retval)
+		return retval;
+
+	hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
+
+	retval = dwc2_get_dr_mode(hsotg);
+	if (retval)
+		goto error;
+
+	hsotg->need_phy_for_wake =
+		of_property_read_bool(dev->dev.of_node,
+				      "snps,need-phy-for-wake");
+
+	/*
+	 * Before performing any core related operations
+	 * check core version.
+	 */
+	retval = dwc2_check_core_version(hsotg);
+	if (retval)
+		goto error;
+
+	/*
+	 * Reset before dwc2_get_hwparams() then it could get power-on real
+	 * reset value form registers.
+	 */
+	retval = dwc2_core_reset(hsotg, false);
+	if (retval)
+		goto error;
+
+	/* Detect config values from hardware */
+	retval = dwc2_get_hwparams(hsotg);
+	if (retval)
+		goto error;
+
+	hsotg->irq = platform_get_irq(dev, 0);
+	if (hsotg->irq < 0) {
+		retval = hsotg->irq;
+		goto error;
+	}
+
+	dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
+		hsotg->irq);
+	retval = devm_request_irq(hsotg->dev, hsotg->irq,
+				  dwc2_handle_common_intr, IRQF_SHARED,
+				  dev_name(hsotg->dev), hsotg);
+	if (retval)
+		goto error;
+
+	/*
+	 * For OTG cores, set the force mode bits to reflect the value
+	 * of dr_mode. Force mode bits should not be touched at any
+	 * other time after this.
+	 */
+	dwc2_force_dr_mode(hsotg);
+
+	retval = dwc2_init_params(hsotg);
+	if (retval)
+		goto error;
+
+	if (hsotg->params.activate_stm_id_vb_detection) {
+		u32 ggpio;
+
+		hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d");
+		if (IS_ERR(hsotg->usb33d)) {
+			retval = PTR_ERR(hsotg->usb33d);
+			dev_err_probe(hsotg->dev, retval, "failed to request usb33d supply\n");
+			goto error;
+		}
+		retval = regulator_enable(hsotg->usb33d);
+		if (retval) {
+			dev_err_probe(hsotg->dev, retval, "failed to enable usb33d supply\n");
+			goto error;
+		}
+
+		ggpio = dwc2_readl(hsotg, GGPIO);
+		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
+		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
+		dwc2_writel(hsotg, ggpio, GGPIO);
+
+		/* ID/VBUS detection startup time */
+		usleep_range(5000, 7000);
+	}
+
+	retval = dwc2_drd_init(hsotg);
+	if (retval) {
+		dev_err_probe(hsotg->dev, retval, "failed to initialize dual-role\n");
+		goto error_init;
+	}
+
+	if (hsotg->dr_mode != USB_DR_MODE_HOST) {
+		retval = dwc2_gadget_init(hsotg);
+		if (retval)
+			goto error_drd;
+		hsotg->gadget_enabled = 1;
+	}
+
+	/*
+	 * If we need PHY for wakeup we must be wakeup capable.
+	 * When we have a device that can wake without the PHY we
+	 * can adjust this condition.
+	 */
+	if (hsotg->need_phy_for_wake)
+		device_set_wakeup_capable(&dev->dev, true);
+
+	hsotg->reset_phy_on_wake =
+		of_property_read_bool(dev->dev.of_node,
+				      "snps,reset-phy-on-wake");
+	if (hsotg->reset_phy_on_wake && !hsotg->phy) {
+		dev_warn(hsotg->dev,
+			 "Quirk reset-phy-on-wake only supports generic PHYs\n");
+		hsotg->reset_phy_on_wake = false;
+	}
+
+	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
+		retval = dwc2_hcd_init(hsotg);
+		if (retval) {
+			if (hsotg->gadget_enabled)
+				dwc2_hsotg_remove(hsotg);
+			goto error_drd;
+		}
+		hsotg->hcd_enabled = 1;
+	}
+
+	platform_set_drvdata(dev, hsotg);
+	hsotg->hibernated = 0;
+
+	dwc2_debugfs_init(hsotg);
+
+	/* Gadget code manages lowlevel hw on its own */
+	if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
+		dwc2_lowlevel_hw_disable(hsotg);
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+	/* Postponed adding a new gadget to the udc class driver list */
+	if (hsotg->gadget_enabled) {
+		retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget);
+		if (retval) {
+			hsotg->gadget.udc = NULL;
+			dwc2_hsotg_remove(hsotg);
+			goto error_debugfs;
+		}
+	}
+#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
+	return 0;
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+error_debugfs:
+	dwc2_debugfs_exit(hsotg);
+	if (hsotg->hcd_enabled)
+		dwc2_hcd_remove(hsotg);
+#endif
+error_drd:
+	dwc2_drd_exit(hsotg);
+
+error_init:
+	if (hsotg->params.activate_stm_id_vb_detection)
+		regulator_disable(hsotg->usb33d);
+error:
+	if (hsotg->ll_hw_enabled)
+		dwc2_lowlevel_hw_disable(hsotg);
+	return retval;
+}
+
+static int __maybe_unused dwc2_suspend(struct device *dev)
+{
+	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
+	bool is_device_mode;
+	int ret = 0;
+
+	if (!dwc2->ll_hw_enabled)
+		return 0;
+
+	is_device_mode = dwc2_is_device_mode(dwc2);
+	if (is_device_mode)
+		dwc2_hsotg_suspend(dwc2);
+
+	dwc2_drd_suspend(dwc2);
+
+	if (dwc2->params.activate_stm_id_vb_detection) {
+		unsigned long flags;
+		u32 ggpio, gotgctl;
+
+		/*
+		 * Need to force the mode to the current mode to avoid Mode
+		 * Mismatch Interrupt when ID detection will be disabled.
+		 */
+		dwc2_force_mode(dwc2, !is_device_mode);
+
+		spin_lock_irqsave(&dwc2->lock, flags);
+		gotgctl = dwc2_readl(dwc2, GOTGCTL);
+		/* bypass debounce filter, enable overrides */
+		gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
+		gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN;
+		/* Force A / B session if needed */
+		if (gotgctl & GOTGCTL_ASESVLD)
+			gotgctl |= GOTGCTL_AVALOVAL;
+		if (gotgctl & GOTGCTL_BSESVLD)
+			gotgctl |= GOTGCTL_BVALOVAL;
+		dwc2_writel(dwc2, gotgctl, GOTGCTL);
+		spin_unlock_irqrestore(&dwc2->lock, flags);
+
+		ggpio = dwc2_readl(dwc2, GGPIO);
+		ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN;
+		ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN;
+		dwc2_writel(dwc2, ggpio, GGPIO);
+
+		regulator_disable(dwc2->usb33d);
+	}
+
+	if (is_device_mode)
+		ret = dwc2_gadget_backup_critical_registers(dwc2);
+	else
+		ret = dwc2_host_backup_critical_registers(dwc2);
+
+	if (ret)
+		return ret;
+
+	if (dwc2->ll_hw_enabled &&
+	    (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) {
+		ret = __dwc2_lowlevel_hw_disable(dwc2);
+		dwc2->phy_off_for_suspend = true;
+	}
+
+	return ret;
+}
+
+static int dwc2_restore_critical_registers(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_gregs_backup *gr;
+
+	gr = &hsotg->gr_backup;
+
+	if (!gr->valid) {
+		dev_err(hsotg->dev, "No valid register backup, failed to restore\n");
+		return -EINVAL;
+	}
+
+	if (gr->gintsts & GINTSTS_CURMODE_HOST)
+		return dwc2_host_restore_critical_registers(hsotg);
+
+	return dwc2_gadget_restore_critical_registers(hsotg, DWC2_RESTORE_DCTL |
+						      DWC2_RESTORE_DCFG);
+}
+
+static int __maybe_unused dwc2_resume(struct device *dev)
+{
+	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (!dwc2->ll_hw_enabled)
+		return 0;
+
+	if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) {
+		ret = __dwc2_lowlevel_hw_enable(dwc2);
+		if (ret)
+			return ret;
+	}
+	dwc2->phy_off_for_suspend = false;
+
+	/*
+	 * During suspend it's possible that the power domain for the
+	 * DWC2 controller is disabled and all register values get lost.
+	 * In case the GUSBCFG register is not initialized, it's clear the
+	 * registers must be restored.
+	 */
+	if (!(dwc2_readl(dwc2, GUSBCFG) & GUSBCFG_TOUTCAL_MASK)) {
+		ret = dwc2_restore_critical_registers(dwc2);
+		if (ret)
+			return ret;
+	}
+
+	if (dwc2->params.activate_stm_id_vb_detection) {
+		unsigned long flags;
+		u32 ggpio, gotgctl;
+
+		ret = regulator_enable(dwc2->usb33d);
+		if (ret)
+			return ret;
+
+		ggpio = dwc2_readl(dwc2, GGPIO);
+		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
+		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
+		dwc2_writel(dwc2, ggpio, GGPIO);
+
+		/* ID/VBUS detection startup time */
+		usleep_range(5000, 7000);
+
+		spin_lock_irqsave(&dwc2->lock, flags);
+		gotgctl = dwc2_readl(dwc2, GOTGCTL);
+		gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS;
+		gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN |
+			     GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL);
+		dwc2_writel(dwc2, gotgctl, GOTGCTL);
+		spin_unlock_irqrestore(&dwc2->lock, flags);
+	}
+
+	if (!dwc2->role_sw) {
+		/* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
+		dwc2_force_dr_mode(dwc2);
+	} else {
+		dwc2_drd_resume(dwc2);
+	}
+
+	if (dwc2_is_device_mode(dwc2))
+		ret = dwc2_hsotg_resume(dwc2);
+
+	return ret;
+}
+
+static const struct dev_pm_ops dwc2_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
+};
+
+static struct platform_driver dwc2_platform_driver = {
+	.driver = {
+		.name = dwc2_driver_name,
+		.of_match_table = dwc2_of_match_table,
+		.acpi_match_table = ACPI_PTR(dwc2_acpi_match),
+		.pm = &dwc2_dev_pm_ops,
+	},
+	.probe = dwc2_driver_probe,
+	.remove = dwc2_driver_remove,
+	.shutdown = dwc2_driver_shutdown,
+};
+
+module_platform_driver(dwc2_platform_driver);