Resguardo inicial

linux-7.2.3/include/clocksource/arm_arch_timer.h

@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __CLKSOURCE_ARM_ARCH_TIMER_H
+#define __CLKSOURCE_ARM_ARCH_TIMER_H
+
+#include <linux/bitops.h>
+#include <linux/timecounter.h>
+#include <linux/types.h>
+
+#define ARCH_TIMER_CTRL_ENABLE		(1 << 0)
+#define ARCH_TIMER_CTRL_IT_MASK		(1 << 1)
+#define ARCH_TIMER_CTRL_IT_STAT		(1 << 2)
+
+#define CNTHCTL_EL1PCTEN		(1 << 0)
+#define CNTHCTL_EL1PCEN			(1 << 1)
+#define CNTHCTL_EVNTEN			(1 << 2)
+#define CNTHCTL_EVNTDIR			(1 << 3)
+#define CNTHCTL_EVNTI			(0xF << 4)
+#define CNTHCTL_ECV			(1 << 12)
+#define CNTHCTL_EL1TVT			(1 << 13)
+#define CNTHCTL_EL1TVCT			(1 << 14)
+#define CNTHCTL_EL1NVPCT		(1 << 15)
+#define CNTHCTL_EL1NVVCT		(1 << 16)
+#define CNTHCTL_CNTVMASK		(1 << 18)
+#define CNTHCTL_CNTPMASK		(1 << 19)
+
+enum arch_timer_reg {
+	ARCH_TIMER_REG_CTRL,
+	ARCH_TIMER_REG_CVAL,
+};
+
+enum arch_timer_ppi_nr {
+	ARCH_TIMER_PHYS_SECURE_PPI,
+	ARCH_TIMER_PHYS_NONSECURE_PPI,
+	ARCH_TIMER_VIRT_PPI,
+	ARCH_TIMER_HYP_PPI,
+	ARCH_TIMER_HYP_VIRT_PPI,
+	ARCH_TIMER_MAX_TIMER_PPI
+};
+
+enum arch_timer_spi_nr {
+	ARCH_TIMER_PHYS_SPI,
+	ARCH_TIMER_VIRT_SPI,
+	ARCH_TIMER_MAX_TIMER_SPI
+};
+
+#define ARCH_TIMER_PHYS_ACCESS		0
+#define ARCH_TIMER_VIRT_ACCESS		1
+
+#define ARCH_TIMER_MEM_MAX_FRAMES	8
+
+#define ARCH_TIMER_USR_PCT_ACCESS_EN	(1 << 0) /* physical counter */
+#define ARCH_TIMER_USR_VCT_ACCESS_EN	(1 << 1) /* virtual counter */
+#define ARCH_TIMER_VIRT_EVT_EN		(1 << 2)
+#define ARCH_TIMER_EVT_TRIGGER_SHIFT	(4)
+#define ARCH_TIMER_EVT_TRIGGER_MASK	(0xF << ARCH_TIMER_EVT_TRIGGER_SHIFT)
+#define ARCH_TIMER_USR_VT_ACCESS_EN	(1 << 8) /* virtual timer registers */
+#define ARCH_TIMER_USR_PT_ACCESS_EN	(1 << 9) /* physical timer registers */
+#define ARCH_TIMER_EVT_INTERVAL_SCALE	(1 << 17) /* EVNTIS in the ARMv8 ARM */
+
+#define ARCH_TIMER_EVT_STREAM_PERIOD_US	100
+#define ARCH_TIMER_EVT_STREAM_FREQ				\
+	(USEC_PER_SEC / ARCH_TIMER_EVT_STREAM_PERIOD_US)
+
+struct arch_timer_kvm_info {
+	struct timecounter timecounter;
+	int virtual_irq;
+	int physical_irq;
+};
+
+struct arch_timer_mem_frame {
+	bool valid;
+	phys_addr_t cntbase;
+	size_t size;
+	int phys_irq;
+	int virt_irq;
+};
+
+struct arch_timer_mem {
+	phys_addr_t cntctlbase;
+	size_t size;
+	struct arch_timer_mem_frame frame[ARCH_TIMER_MEM_MAX_FRAMES];
+};
+
+#ifdef CONFIG_ARM_ARCH_TIMER
+
+extern u32 arch_timer_get_rate(void);
+extern u64 (*arch_timer_read_counter)(void);
+extern struct arch_timer_kvm_info *arch_timer_get_kvm_info(void);
+extern bool arch_timer_evtstrm_available(void);
+
+#else
+
+static inline u32 arch_timer_get_rate(void)
+{
+	return 0;
+}
+
+static inline u64 arch_timer_read_counter(void)
+{
+	return 0;
+}
+
+static inline bool arch_timer_evtstrm_available(void)
+{
+	return false;
+}
+
+#endif
+
+#endif

linux-7.2.3/include/clocksource/hyperv_timer.h

@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * Definitions for the clocksource provided by the Hyper-V
+ * hypervisor to guest VMs, as described in the Hyper-V Top
+ * Level Functional Spec (TLFS).
+ *
+ * Copyright (C) 2019, Microsoft, Inc.
+ *
+ * Author:  Michael Kelley <mikelley@microsoft.com>
+ */
+
+#ifndef __CLKSOURCE_HYPERV_TIMER_H
+#define __CLKSOURCE_HYPERV_TIMER_H
+
+#include <linux/clocksource.h>
+#include <linux/math64.h>
+#include <hyperv/hvhdk.h>
+
+#define HV_MAX_MAX_DELTA_TICKS 0xffffffff
+#define HV_MIN_DELTA_TICKS 1
+
+#ifdef CONFIG_HYPERV_TIMER
+
+#include <asm/hyperv_timer.h>
+
+/* Routines called by the VMbus driver */
+extern int hv_stimer_alloc(bool have_percpu_irqs);
+extern int hv_stimer_cleanup(unsigned int cpu);
+extern void hv_stimer_legacy_init(unsigned int cpu, int sint);
+extern void hv_stimer_legacy_cleanup(unsigned int cpu);
+extern void hv_stimer_global_cleanup(void);
+extern void hv_stimer0_isr(void);
+
+extern void hv_init_clocksource(void);
+extern void hv_remap_tsc_clocksource(void);
+
+extern unsigned long hv_get_tsc_pfn(void);
+extern struct ms_hyperv_tsc_page *hv_get_tsc_page(void);
+
+extern void hv_adj_sched_clock_offset(u64 offset);
+
+static __always_inline bool
+hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg,
+		     u64 *cur_tsc, u64 *time)
+{
+	u64 scale, offset;
+	u32 sequence;
+
+	/*
+	 * The protocol for reading Hyper-V TSC page is specified in Hypervisor
+	 * Top-Level Functional Specification ver. 3.0 and above. To get the
+	 * reference time we must do the following:
+	 * - READ ReferenceTscSequence
+	 *   A special '0' value indicates the time source is unreliable and we
+	 *   need to use something else. The currently published specification
+	 *   versions (up to 4.0b) contain a mistake and wrongly claim '-1'
+	 *   instead of '0' as the special value, see commit c35b82ef0294.
+	 * - ReferenceTime =
+	 *        ((RDTSC() * ReferenceTscScale) >> 64) + ReferenceTscOffset
+	 * - READ ReferenceTscSequence again. In case its value has changed
+	 *   since our first reading we need to discard ReferenceTime and repeat
+	 *   the whole sequence as the hypervisor was updating the page in
+	 *   between.
+	 */
+	do {
+		sequence = READ_ONCE(tsc_pg->tsc_sequence);
+		if (!sequence)
+			return false;
+		/*
+		 * Make sure we read sequence before we read other values from
+		 * TSC page.
+		 */
+		smp_rmb();
+
+		scale = READ_ONCE(tsc_pg->tsc_scale);
+		offset = READ_ONCE(tsc_pg->tsc_offset);
+		*cur_tsc = hv_get_raw_timer();
+
+		/*
+		 * Make sure we read sequence after we read all other values
+		 * from TSC page.
+		 */
+		smp_rmb();
+
+	} while (READ_ONCE(tsc_pg->tsc_sequence) != sequence);
+
+	*time = mul_u64_u64_shr(*cur_tsc, scale, 64) + offset;
+	return true;
+}
+
+#else /* CONFIG_HYPERV_TIMER */
+static inline unsigned long hv_get_tsc_pfn(void)
+{
+	return 0;
+}
+
+static inline struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
+{
+	return NULL;
+}
+
+static __always_inline bool
+hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg, u64 *cur_tsc, u64 *time)
+{
+	return false;
+}
+
+static inline int hv_stimer_cleanup(unsigned int cpu) { return 0; }
+static inline void hv_stimer_legacy_init(unsigned int cpu, int sint) {}
+static inline void hv_stimer_legacy_cleanup(unsigned int cpu) {}
+static inline void hv_stimer_global_cleanup(void) {}
+static inline void hv_stimer0_isr(void) {}
+
+#endif /* CONFIG_HYPERV_TIMER */
+
+#endif

linux-7.2.3/include/clocksource/pxa.h

@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * PXA clocksource, clockevents, and OST interrupt handlers.
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ */
+
+#ifndef _CLOCKSOURCE_PXA_H
+#define _CLOCKSOURCE_PXA_H
+
+extern void pxa_timer_nodt_init(int irq, void __iomem *base);
+
+#endif

linux-7.2.3/include/clocksource/samsung_pwm.h

@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ */
+#ifndef __CLOCKSOURCE_SAMSUNG_PWM_H
+#define __CLOCKSOURCE_SAMSUNG_PWM_H
+
+#include <linux/spinlock.h>
+
+#define SAMSUNG_PWM_NUM		5
+
+/*
+ * Following declaration must be in an ifdef due to this symbol being static
+ * in pwm-samsung driver if the clocksource driver is not compiled in and the
+ * spinlock is not shared between both drivers.
+ */
+#ifdef CONFIG_CLKSRC_SAMSUNG_PWM
+extern spinlock_t samsung_pwm_lock;
+#endif
+
+struct samsung_pwm_variant {
+	u8 bits;
+	u8 div_base;
+	u8 tclk_mask;
+	u8 output_mask;
+	bool has_tint_cstat;
+};
+
+void samsung_pwm_clocksource_init(void __iomem *base,
+				  unsigned int *irqs,
+				  const struct samsung_pwm_variant *variant);
+
+#endif /* __CLOCKSOURCE_SAMSUNG_PWM_H */

linux-7.2.3/include/clocksource/timer-davinci.h

@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * TI DaVinci clocksource driver
+ *
+ * Copyright (C) 2019 Texas Instruments
+ * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ */
+
+#ifndef __TIMER_DAVINCI_H__
+#define __TIMER_DAVINCI_H__
+
+#include <linux/clk.h>
+#include <linux/ioport.h>
+
+enum {
+	DAVINCI_TIMER_CLOCKEVENT_IRQ,
+	DAVINCI_TIMER_CLOCKSOURCE_IRQ,
+	DAVINCI_TIMER_NUM_IRQS,
+};
+
+/**
+ * struct davinci_timer_cfg - davinci clocksource driver configuration struct
+ * @reg:        register range resource
+ * @irq:        clockevent and clocksource interrupt resources
+ * @cmp_off:    if set - it specifies the compare register used for clockevent
+ *
+ * Note: if the compare register is specified, the driver will use the bottom
+ * clock half for both clocksource and clockevent and the compare register
+ * to generate event irqs. The user must supply the correct compare register
+ * interrupt number.
+ *
+ * This is only used by da830 the DSP of which uses the top half. The timer
+ * driver still configures the top half to run in free-run mode.
+ */
+struct davinci_timer_cfg {
+	struct resource reg;
+	struct resource irq[DAVINCI_TIMER_NUM_IRQS];
+	unsigned int cmp_off;
+};
+
+int __init davinci_timer_register(struct clk *clk,
+				  const struct davinci_timer_cfg *data);
+
+#endif /* __TIMER_DAVINCI_H__ */

linux-7.2.3/include/clocksource/timer-goldfish.h

@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * goldfish-timer clocksource
+ * Registers definition for the goldfish-timer device
+ */
+
+#ifndef _CLOCKSOURCE_TIMER_GOLDFISH_H
+#define _CLOCKSOURCE_TIMER_GOLDFISH_H
+
+/*
+ * TIMER_TIME_LOW	 get low bits of current time and update TIMER_TIME_HIGH
+ * TIMER_TIME_HIGH	 get high bits of time at last TIMER_TIME_LOW read
+ * TIMER_ALARM_LOW	 set low bits of alarm and activate it
+ * TIMER_ALARM_HIGH	 set high bits of next alarm
+ * TIMER_IRQ_ENABLED	 enable alarm interrupt
+ * TIMER_CLEAR_ALARM	 disarm an existing alarm
+ * TIMER_ALARM_STATUS	 alarm status (running or not)
+ * TIMER_CLEAR_INTERRUPT clear interrupt
+ */
+#define TIMER_TIME_LOW		0x00
+#define TIMER_TIME_HIGH		0x04
+#define TIMER_ALARM_LOW		0x08
+#define TIMER_ALARM_HIGH	0x0c
+#define TIMER_IRQ_ENABLED	0x10
+#define TIMER_CLEAR_ALARM	0x14
+#define TIMER_ALARM_STATUS	0x18
+#define TIMER_CLEAR_INTERRUPT	0x1c
+
+extern int goldfish_timer_init(int irq, void __iomem *base);
+
+#endif /* _CLOCKSOURCE_TIMER_GOLDFISH_H */

linux-7.2.3/include/clocksource/timer-riscv.h

@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2019 Western Digital Corporation or its affiliates.
+ *
+ * Authors:
+ *	Atish Patra <atish.patra@wdc.com>
+ */
+
+#ifndef __TIMER_RISCV_H
+#define __TIMER_RISCV_H
+
+#include <linux/types.h>
+
+extern void riscv_cs_get_mult_shift(u32 *mult, u32 *shift);
+
+#endif

linux-7.2.3/include/clocksource/timer-ti-dm.h

@@ -0,0 +1,136 @@
+/*
+ * OMAP Dual-Mode Timers
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Platform device conversion and hwmod support.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * PWM and clock framwork support by Timo Teras.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#ifndef __CLOCKSOURCE_DMTIMER_H
+#define __CLOCKSOURCE_DMTIMER_H
+
+/* clock sources */
+#define OMAP_TIMER_SRC_SYS_CLK			0x00
+#define OMAP_TIMER_SRC_32_KHZ			0x01
+#define OMAP_TIMER_SRC_EXT_CLK			0x02
+
+/* timer interrupt enable bits */
+#define OMAP_TIMER_INT_CAPTURE			(1 << 2)
+#define OMAP_TIMER_INT_OVERFLOW			(1 << 1)
+#define OMAP_TIMER_INT_MATCH			(1 << 0)
+
+/* trigger types */
+#define OMAP_TIMER_TRIGGER_NONE			0x00
+#define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
+#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
+
+/* timer capabilities used in hwmod database */
+#define OMAP_TIMER_SECURE				0x80000000
+#define OMAP_TIMER_ALWON				0x40000000
+#define OMAP_TIMER_HAS_PWM				0x20000000
+#define OMAP_TIMER_NEEDS_RESET				0x10000000
+#define OMAP_TIMER_HAS_DSP_IRQ				0x08000000
+
+struct omap_dm_timer {
+};
+
+u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
+
+/*
+ * Do not use the defines below, they are not needed. They should be only
+ * used by dmtimer.c and sys_timer related code.
+ */
+
+/*
+ * The interrupt registers are different between v1 and v2 ip.
+ * These registers are offsets from timer->iobase.
+ */
+#define OMAP_TIMER_ID_OFFSET		0x00
+#define OMAP_TIMER_OCP_CFG_OFFSET	0x10
+
+#define OMAP_TIMER_V1_SYS_STAT_OFFSET	0x14
+#define OMAP_TIMER_V1_STAT_OFFSET	0x18
+#define OMAP_TIMER_V1_INT_EN_OFFSET	0x1c
+
+#define OMAP_TIMER_V2_IRQSTATUS_RAW	0x24
+#define OMAP_TIMER_V2_IRQSTATUS		0x28
+#define OMAP_TIMER_V2_IRQENABLE_SET	0x2c
+#define OMAP_TIMER_V2_IRQENABLE_CLR	0x30
+
+/*
+ * The functional registers have a different base on v1 and v2 ip.
+ * These registers are offsets from timer->func_base. The func_base
+ * is samae as io_base for v1 and io_base + 0x14 for v2 ip.
+ *
+ */
+#define OMAP_TIMER_V2_FUNC_OFFSET		0x14
+
+#define _OMAP_TIMER_WAKEUP_EN_OFFSET	0x20
+#define _OMAP_TIMER_CTRL_OFFSET		0x24
+#define		OMAP_TIMER_CTRL_GPOCFG		(1 << 14)
+#define		OMAP_TIMER_CTRL_CAPTMODE	(1 << 13)
+#define		OMAP_TIMER_CTRL_PT		(1 << 12)
+#define		OMAP_TIMER_CTRL_TCM_LOWTOHIGH	(0x1 << 8)
+#define		OMAP_TIMER_CTRL_TCM_HIGHTOLOW	(0x2 << 8)
+#define		OMAP_TIMER_CTRL_TCM_BOTHEDGES	(0x3 << 8)
+#define		OMAP_TIMER_CTRL_SCPWM		(1 << 7)
+#define		OMAP_TIMER_CTRL_CE		(1 << 6) /* compare enable */
+#define		OMAP_TIMER_CTRL_PRE		(1 << 5) /* prescaler enable */
+#define		OMAP_TIMER_CTRL_PTV_SHIFT	2 /* prescaler value shift */
+#define		OMAP_TIMER_CTRL_POSTED		(1 << 2)
+#define		OMAP_TIMER_CTRL_AR		(1 << 1) /* auto-reload enable */
+#define		OMAP_TIMER_CTRL_ST		(1 << 0) /* start timer */
+#define _OMAP_TIMER_COUNTER_OFFSET	0x28
+#define _OMAP_TIMER_LOAD_OFFSET		0x2c
+#define _OMAP_TIMER_TRIGGER_OFFSET	0x30
+#define _OMAP_TIMER_WRITE_PEND_OFFSET	0x34
+#define		WP_NONE			0	/* no write pending bit */
+#define		WP_TCLR			(1 << 0)
+#define		WP_TCRR			(1 << 1)
+#define		WP_TLDR			(1 << 2)
+#define		WP_TTGR			(1 << 3)
+#define		WP_TMAR			(1 << 4)
+#define		WP_TPIR			(1 << 5)
+#define		WP_TNIR			(1 << 6)
+#define		WP_TCVR			(1 << 7)
+#define		WP_TOCR			(1 << 8)
+#define		WP_TOWR			(1 << 9)
+#define _OMAP_TIMER_MATCH_OFFSET	0x38
+#define _OMAP_TIMER_CAPTURE_OFFSET	0x3c
+#define _OMAP_TIMER_IF_CTRL_OFFSET	0x40
+#define _OMAP_TIMER_CAPTURE2_OFFSET		0x44	/* TCAR2, 34xx only */
+#define _OMAP_TIMER_TICK_POS_OFFSET		0x48	/* TPIR, 34xx only */
+#define _OMAP_TIMER_TICK_NEG_OFFSET		0x4c	/* TNIR, 34xx only */
+#define _OMAP_TIMER_TICK_COUNT_OFFSET		0x50	/* TCVR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET	0x54	/* TOCR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET	0x58	/* TOWR, 34xx only */
+
+#endif /* __CLOCKSOURCE_DMTIMER_H */

linux-7.2.3/include/clocksource/timer-xilinx.h

@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2021 Sean Anderson <sean.anderson@seco.com>
+ */
+
+#ifndef XILINX_TIMER_H
+#define XILINX_TIMER_H
+
+#include <linux/compiler.h>
+
+#define TCSR0	0x00
+#define TLR0	0x04
+#define TCR0	0x08
+#define TCSR1	0x10
+#define TLR1	0x14
+#define TCR1	0x18
+
+#define TCSR_MDT	BIT(0)
+#define TCSR_UDT	BIT(1)
+#define TCSR_GENT	BIT(2)
+#define TCSR_CAPT	BIT(3)
+#define TCSR_ARHT	BIT(4)
+#define TCSR_LOAD	BIT(5)
+#define TCSR_ENIT	BIT(6)
+#define TCSR_ENT	BIT(7)
+#define TCSR_TINT	BIT(8)
+#define TCSR_PWMA	BIT(9)
+#define TCSR_ENALL	BIT(10)
+#define TCSR_CASC	BIT(11)
+
+struct clk;
+struct device_node;
+struct regmap;
+
+/**
+ * struct xilinx_timer_priv - Private data for Xilinx AXI timer drivers
+ * @map: Regmap of the device, possibly with an offset
+ * @clk: Parent clock
+ * @max: Maximum value of the counters
+ */
+struct xilinx_timer_priv {
+	struct regmap *map;
+	struct clk *clk;
+	u64 max;
+};
+
+/**
+ * xilinx_timer_tlr_cycles() - Calculate the TLR for a period specified
+ *                             in clock cycles
+ * @priv: The timer's private data
+ * @tcsr: The value of the TCSR register for this counter
+ * @cycles: The number of cycles in this period
+ *
+ * Callers of this function MUST ensure that @cycles is representable as
+ * a TLR.
+ *
+ * Return: The calculated value for TLR
+ */
+u32 xilinx_timer_tlr_cycles(struct xilinx_timer_priv *priv, u32 tcsr,
+			    u64 cycles);
+
+/**
+ * xilinx_timer_get_period() - Get the current period of a counter
+ * @priv: The timer's private data
+ * @tlr: The value of TLR for this counter
+ * @tcsr: The value of TCSR for this counter
+ *
+ * Return: The period, in ns
+ */
+unsigned int xilinx_timer_get_period(struct xilinx_timer_priv *priv,
+				     u32 tlr, u32 tcsr);
+
+#endif /* XILINX_TIMER_H */