Resguardo inicial

linux-7.2.3/include/linux/platform_data/media/camera-pxa.h

@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+    camera.h - PXA camera driver header file
+
+    Copyright (C) 2003, Intel Corporation
+    Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+
+*/
+
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+#define PXA_CAMERA_MASTER	1
+#define PXA_CAMERA_DATAWIDTH_4	2
+#define PXA_CAMERA_DATAWIDTH_5	4
+#define PXA_CAMERA_DATAWIDTH_8	8
+#define PXA_CAMERA_DATAWIDTH_9	0x10
+#define PXA_CAMERA_DATAWIDTH_10	0x20
+#define PXA_CAMERA_PCLK_EN	0x40
+#define PXA_CAMERA_MCLK_EN	0x80
+#define PXA_CAMERA_PCP		0x100
+#define PXA_CAMERA_HSP		0x200
+#define PXA_CAMERA_VSP		0x400
+
+struct pxacamera_platform_data {
+	unsigned long flags;
+	unsigned long mclk_10khz;
+	int sensor_i2c_adapter_id;
+	int sensor_i2c_address;
+};
+
+extern void pxa_set_camera_info(struct pxacamera_platform_data *);
+
+#endif /* __ASM_ARCH_CAMERA_H_ */

linux-7.2.3/include/linux/platform_data/media/mmp-camera.h

@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Information for the Marvell Armada MMP camera
+ */
+
+#include <media/v4l2-mediabus.h>
+
+enum dphy3_algo {
+	DPHY3_ALGO_DEFAULT = 0,
+	DPHY3_ALGO_PXA910,
+	DPHY3_ALGO_PXA2128
+};
+
+struct mmp_camera_platform_data {
+	enum v4l2_mbus_type bus_type;
+	int mclk_src;	/* which clock source the MCLK derives from */
+	int mclk_div;	/* Clock Divider Value for MCLK */
+	/*
+	 * MIPI support
+	 */
+	int dphy[3];		/* DPHY: CSI2_DPHY3, CSI2_DPHY5, CSI2_DPHY6 */
+	enum dphy3_algo dphy3_algo;	/* algos for calculate CSI2_DPHY3 */
+	int lane;		/* ccic used lane number; 0 means DVP mode */
+	int lane_clk;
+};

linux-7.2.3/include/linux/platform_data/media/si4713.h

@@ -0,0 +1,48 @@
+/*
+ * include/linux/platform_data/media/si4713.h
+ *
+ * Board related data definitions for Si4713 i2c device driver.
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#ifndef SI4713_H
+#define SI4713_H
+
+/* The SI4713 I2C sensor chip has a fixed slave address of 0xc6 or 0x22. */
+#define SI4713_I2C_ADDR_BUSEN_HIGH	0x63
+#define SI4713_I2C_ADDR_BUSEN_LOW	0x11
+
+/*
+ * Platform dependent definition
+ */
+struct si4713_platform_data {
+	bool is_platform_device;
+};
+
+/*
+ * Structure to query for Received Noise Level (RNL).
+ */
+struct si4713_rnl {
+	__u32 index;		/* modulator index */
+	__u32 frequency;	/* frequency to perform rnl measurement */
+	__s32 rnl;		/* result of measurement in dBuV */
+	__u32 reserved[4];	/* drivers and apps must init this to 0 */
+};
+
+/*
+ * This is the ioctl number to query for rnl. Users must pass a
+ * struct si4713_rnl pointer specifying desired frequency in 'frequency' field
+ * following driver capabilities (i.e V4L2_TUNER_CAP_LOW).
+ * Driver must return measured value in the same structure, filling 'rnl' field.
+ */
+#define SI4713_IOC_MEASURE_RNL	_IOWR('V', BASE_VIDIOC_PRIVATE + 0, \
+						struct si4713_rnl)
+
+#endif /* ifndef SI4713_H*/

linux-7.2.3/include/linux/platform_data/media/timb_radio.h

@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * timb_radio.h Platform struct for the Timberdale radio driver
+ * Copyright (c) 2009 Intel Corporation
+ */
+
+#ifndef _TIMB_RADIO_
+#define _TIMB_RADIO_ 1
+
+#include <linux/i2c.h>
+
+struct timb_radio_platform_data {
+	int i2c_adapter; /* I2C adapter where the tuner and dsp are attached */
+	struct i2c_board_info *tuner;
+	struct i2c_board_info *dsp;
+};
+
+#endif

linux-7.2.3/include/linux/platform_data/media/timb_video.h

@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * timb_video.h Platform struct for the Timberdale video driver
+ * Copyright (c) 2009-2010 Intel Corporation
+ */
+
+#ifndef _TIMB_VIDEO_
+#define _TIMB_VIDEO_ 1
+
+#include <linux/i2c.h>
+
+struct timb_video_platform_data {
+	int dma_channel;
+	int i2c_adapter; /* The I2C adapter where the encoder is attached */
+	struct {
+		const char *module_name;
+		struct i2c_board_info *info;
+	} encoder;
+};
+
+#endif