Resguardo inicial

linux-7.2.3/include/uapi/fwctl/bnxt.h

@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (c) 2026, Broadcom Inc
+ */
+
+#ifndef _UAPI_FWCTL_BNXT_H_
+#define _UAPI_FWCTL_BNXT_H_
+
+#include <linux/types.h>
+
+enum fwctl_bnxt_commands {
+	FWCTL_BNXT_INLINE_COMMANDS = 0,
+	FWCTL_BNXT_QUERY_COMMANDS,
+	FWCTL_BNXT_SEND_COMMANDS,
+};
+
+/**
+ * struct fwctl_info_bnxt - ioctl(FWCTL_INFO) out_device_data
+ * @uctx_caps: The command capabilities driver accepts.
+ *
+ * Return basic information about the FW interface available.
+ */
+struct fwctl_info_bnxt {
+	__u32 uctx_caps;
+};
+#endif

linux-7.2.3/include/uapi/fwctl/cxl.h

@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (c) 2024-2025 Intel Corporation
+ *
+ * These are definitions for the mailbox command interface of CXL subsystem.
+ */
+#ifndef _UAPI_FWCTL_CXL_H_
+#define _UAPI_FWCTL_CXL_H_
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <cxl/features.h>
+
+/**
+ * struct fwctl_rpc_cxl - ioctl(FWCTL_RPC) input for CXL
+ * @opcode: CXL mailbox command opcode
+ * @flags: Flags for the command (input).
+ * @op_size: Size of input payload.
+ * @reserved1: Reserved. Must be 0s.
+ * @get_sup_feats_in: Get Supported Features input
+ * @get_feat_in: Get Feature input
+ * @set_feat_in: Set Feature input
+ */
+struct fwctl_rpc_cxl {
+	__struct_group(fwctl_rpc_cxl_hdr, hdr, /* no attrs */,
+		__u32 opcode;
+		__u32 flags;
+		__u32 op_size;
+		__u32 reserved1;
+	);
+	union {
+		struct cxl_mbox_get_sup_feats_in get_sup_feats_in;
+		struct cxl_mbox_get_feat_in get_feat_in;
+		struct cxl_mbox_set_feat_in set_feat_in;
+	};
+};
+
+/**
+ * struct fwctl_rpc_cxl_out - ioctl(FWCTL_RPC) output for CXL
+ * @size: Size of the output payload
+ * @retval: Return value from device
+ * @get_sup_feats_out: Get Supported Features output
+ * @payload: raw byte stream of payload
+ */
+struct fwctl_rpc_cxl_out {
+	__struct_group(fwctl_rpc_cxl_out_hdr, hdr, /* no attrs */,
+		__u32 size;
+		__u32 retval;
+	);
+	union {
+		struct cxl_mbox_get_sup_feats_out get_sup_feats_out;
+		__DECLARE_FLEX_ARRAY(__u8, payload);
+	};
+};
+
+#endif

linux-7.2.3/include/uapi/fwctl/fwctl.h

@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* Copyright (c) 2024-2025, NVIDIA CORPORATION & AFFILIATES.
+ */
+#ifndef _UAPI_FWCTL_H
+#define _UAPI_FWCTL_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define FWCTL_TYPE 0x9A
+
+/**
+ * DOC: General ioctl format
+ *
+ * The ioctl interface follows a general format to allow for extensibility. Each
+ * ioctl is passed a structure pointer as the argument providing the size of
+ * the structure in the first u32. The kernel checks that any structure space
+ * beyond what it understands is 0. This allows userspace to use the backward
+ * compatible portion while consistently using the newer, larger, structures.
+ *
+ * ioctls use a standard meaning for common errnos:
+ *
+ *  - ENOTTY: The IOCTL number itself is not supported at all
+ *  - E2BIG: The IOCTL number is supported, but the provided structure has
+ *    non-zero in a part the kernel does not understand.
+ *  - EOPNOTSUPP: The IOCTL number is supported, and the structure is
+ *    understood, however a known field has a value the kernel does not
+ *    understand or support.
+ *  - EINVAL: Everything about the IOCTL was understood, but a field is not
+ *    correct.
+ *  - ENOMEM: Out of memory.
+ *  - ENODEV: The underlying device has been hot-unplugged and the FD is
+ *            orphaned.
+ *
+ * As well as additional errnos, within specific ioctls.
+ */
+enum {
+	FWCTL_CMD_BASE = 0,
+	FWCTL_CMD_INFO = 0,
+	FWCTL_CMD_RPC = 1,
+};
+
+enum fwctl_device_type {
+	FWCTL_DEVICE_TYPE_ERROR = 0,
+	FWCTL_DEVICE_TYPE_MLX5 = 1,
+	FWCTL_DEVICE_TYPE_CXL = 2,
+	FWCTL_DEVICE_TYPE_BNXT = 3,
+	FWCTL_DEVICE_TYPE_PDS = 4,
+};
+
+/**
+ * struct fwctl_info - ioctl(FWCTL_INFO)
+ * @size: sizeof(struct fwctl_info)
+ * @flags: Must be 0
+ * @out_device_type: Returns the type of the device from enum fwctl_device_type
+ * @device_data_len: On input the length of the out_device_data memory. On
+ *	output the size of the kernel's device_data which may be larger or
+ *	smaller than the input. Maybe 0 on input.
+ * @out_device_data: Pointer to a memory of device_data_len bytes. Kernel will
+ *	fill the entire memory, zeroing as required.
+ *
+ * Returns basic information about this fwctl instance, particularly what driver
+ * is being used to define the device_data format.
+ */
+struct fwctl_info {
+	__u32 size;
+	__u32 flags;
+	__u32 out_device_type;
+	__u32 device_data_len;
+	__aligned_u64 out_device_data;
+};
+#define FWCTL_INFO _IO(FWCTL_TYPE, FWCTL_CMD_INFO)
+
+/**
+ * enum fwctl_rpc_scope - Scope of access for the RPC
+ *
+ * Refer to fwctl.rst for a more detailed discussion of these scopes.
+ */
+enum fwctl_rpc_scope {
+	/**
+	 * @FWCTL_RPC_CONFIGURATION: Device configuration access scope
+	 *
+	 * Read/write access to device configuration. When configuration
+	 * is written to the device it remains in a fully supported state.
+	 */
+	FWCTL_RPC_CONFIGURATION = 0,
+	/**
+	 * @FWCTL_RPC_DEBUG_READ_ONLY: Read only access to debug information
+	 *
+	 * Readable debug information. Debug information is compatible with
+	 * kernel lockdown, and does not disclose any sensitive information. For
+	 * instance exposing any encryption secrets from this information is
+	 * forbidden.
+	 */
+	FWCTL_RPC_DEBUG_READ_ONLY = 1,
+	/**
+	 * @FWCTL_RPC_DEBUG_WRITE: Writable access to lockdown compatible debug information
+	 *
+	 * Allows write access to data in the device which may leave a fully
+	 * supported state. This is intended to permit intensive and possibly
+	 * invasive debugging. This scope will taint the kernel.
+	 */
+	FWCTL_RPC_DEBUG_WRITE = 2,
+	/**
+	 * @FWCTL_RPC_DEBUG_WRITE_FULL: Write access to all debug information
+	 *
+	 * Allows read/write access to everything. Requires CAP_SYS_RAW_IO, so
+	 * it is not required to follow lockdown principals. If in doubt
+	 * debugging should be placed in this scope. This scope will taint the
+	 * kernel.
+	 */
+	FWCTL_RPC_DEBUG_WRITE_FULL = 3,
+};
+
+/**
+ * struct fwctl_rpc - ioctl(FWCTL_RPC)
+ * @size: sizeof(struct fwctl_rpc)
+ * @scope: One of enum fwctl_rpc_scope, required scope for the RPC
+ * @in_len: Length of the in memory
+ * @out_len: Length of the out memory
+ * @in: Request message in device specific format
+ * @out: Response message in device specific format
+ *
+ * Deliver a Remote Procedure Call to the device FW and return the response. The
+ * call's parameters and return are marshaled into linear buffers of memory. Any
+ * errno indicates that delivery of the RPC to the device failed. Return status
+ * originating in the device during a successful delivery must be encoded into
+ * out.
+ *
+ * The format of the buffers matches the out_device_type from FWCTL_INFO.
+ */
+struct fwctl_rpc {
+	__u32 size;
+	__u32 scope;
+	__u32 in_len;
+	__u32 out_len;
+	__aligned_u64 in;
+	__aligned_u64 out;
+};
+#define FWCTL_RPC _IO(FWCTL_TYPE, FWCTL_CMD_RPC)
+
+#endif

linux-7.2.3/include/uapi/fwctl/mlx5.h

@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (c) 2024-2025, NVIDIA CORPORATION & AFFILIATES
+ *
+ * These are definitions for the command interface for mlx5 HW. mlx5 FW has a
+ * User Context mechanism which allows the FW to understand a security scope.
+ * FWCTL binds each FD to a FW user context and then places the User Context ID
+ * (UID) in each command header. The created User Context has a capability set
+ * that is appropriate for FWCTL's security model.
+ *
+ * Command formation should use a copy of the structs in mlx5_ifc.h following
+ * the Programmers Reference Manual. A open release is available here:
+ *
+ *  https://network.nvidia.com/files/doc-2020/ethernet-adapters-programming-manual.pdf
+ *
+ * The device_type for this file is FWCTL_DEVICE_TYPE_MLX5.
+ */
+#ifndef _UAPI_FWCTL_MLX5_H
+#define _UAPI_FWCTL_MLX5_H
+
+#include <linux/types.h>
+
+/**
+ * struct fwctl_info_mlx5 - ioctl(FWCTL_INFO) out_device_data
+ * @uid: The FW UID this FD is bound to. Each command header will force
+ *	this value.
+ * @uctx_caps: The FW capabilities that are enabled for the uid.
+ *
+ * Return basic information about the FW interface available.
+ */
+struct fwctl_info_mlx5 {
+	__u32 uid;
+	__u32 uctx_caps;
+};
+
+#endif

linux-7.2.3/include/uapi/fwctl/pds.h

@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* Copyright(c) Advanced Micro Devices, Inc */
+
+/*
+ * fwctl interface info for pds_fwctl
+ */
+
+#ifndef _UAPI_FWCTL_PDS_H_
+#define _UAPI_FWCTL_PDS_H_
+
+#include <linux/types.h>
+
+/**
+ * struct fwctl_info_pds
+ * @uctx_caps:  bitmap of firmware capabilities
+ *
+ * Return basic information about the FW interface available.
+ */
+struct fwctl_info_pds {
+	__u32 uctx_caps;
+};
+
+/**
+ * enum pds_fwctl_capabilities
+ * @PDS_FWCTL_QUERY_CAP: firmware can be queried for information
+ * @PDS_FWCTL_SEND_CAP:  firmware can be sent commands
+ */
+enum pds_fwctl_capabilities {
+	PDS_FWCTL_QUERY_CAP = 0,
+	PDS_FWCTL_SEND_CAP,
+};
+
+/**
+ * struct fwctl_rpc_pds
+ * @in.op:       requested operation code
+ * @in.ep:       firmware endpoint to operate on
+ * @in.rsvd:     reserved
+ * @in.len:      length of payload data
+ * @in.payload:  address of payload buffer
+ * @in:          rpc in parameters
+ * @out.retval:  operation result value
+ * @out.rsvd:    reserved
+ * @out.len:     length of result data buffer
+ * @out.payload: address of payload data buffer
+ * @out:         rpc out parameters
+ */
+struct fwctl_rpc_pds {
+	struct {
+		__u32 op;
+		__u32 ep;
+		__u32 rsvd;
+		__u32 len;
+		__aligned_u64 payload;
+	} in;
+	struct {
+		__u32 retval;
+		__u32 rsvd[2];
+		__u32 len;
+		__aligned_u64 payload;
+	} out;
+};
+#endif /* _UAPI_FWCTL_PDS_H_ */