Resguardo inicial

linux-7.2.3/sound/soc/pxa/Kconfig

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "PXA"
+
+config SND_PXA2XX_SOC
+	tristate "SoC Audio for the Intel PXA2xx chip"
+	depends on ARCH_PXA || (COMPILE_TEST && GPIOLIB_LEGACY)
+	select SND_PXA2XX_LIB
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the PXA2xx AC97, I2S or SSP interface. You will also need
+	  to select the audio interfaces to support below.
+
+config SND_PXA2XX_SOC_AC97
+	tristate "SoC AC97 support for PXA2xx"
+	depends on SND_PXA2XX_SOC
+	depends on AC97_BUS=n
+	default y
+	select AC97_BUS_NEW
+	select SND_PXA2XX_LIB
+	select SND_PXA2XX_LIB_AC97
+
+config SND_PXA2XX_SOC_I2S
+	select SND_PXA2XX_LIB
+	tristate
+
+config SND_PXA_SOC_SSP
+	tristate "Soc Audio via PXA2xx/PXA3xx SSP ports"
+	depends on ARCH_PXA
+	select PXA_SSP
+	select SND_PXA2XX_LIB
+
+config SND_MMP_SOC_SSPA
+	tristate "SoC Audio via MMP SSPA ports"
+	depends on ARCH_MMP
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	help
+	  Say Y if you want to add support for codecs attached to
+	  the MMP SSPA interface.
+
+config SND_PXA2XX_SOC_SPITZ
+	tristate "SoC Audio support for Sharp Zaurus SL-Cxx00"
+	depends on SND_PXA2XX_SOC && PXA_SHARP_Cxx00 && I2C
+	select SND_PXA2XX_SOC_I2S
+	select SND_SOC_WM8750
+	help
+	  Say Y if you want to add support for SoC audio on Sharp
+	  Zaurus SL-Cxx00 models (Spitz, Borzoi and Akita).
+
+config SND_PXA910_SOC
+	tristate "SoC Audio for Marvell PXA910 chip"
+	depends on ARCH_MMP && SND
+	select SND_PCM
+	help
+	  Say Y if you want to add support for SoC audio on the
+	  Marvell PXA910 reference platform.
+
+config SND_PXA2XX_LIB
+	tristate
+	select SND_DMAENGINE_PCM
+
+config SND_PXA2XX_LIB_AC97
+	bool
+endmenu

linux-7.2.3/sound/soc/pxa/Makefile

@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+# PXA Platform Support
+snd-soc-pxa2xx-y := pxa2xx-pcm.o
+snd-soc-pxa2xx-ac97-y := pxa2xx-ac97.o pxa2xx-ac97-lib.o
+snd-soc-pxa2xx-i2s-y := pxa2xx-i2s.o
+snd-soc-pxa2xx-lib-y := pxa2xx-pcm-lib.o
+snd-soc-pxa-ssp-y := pxa-ssp.o
+snd-soc-mmp-sspa-y := mmp-sspa.o
+
+obj-$(CONFIG_SND_PXA2XX_SOC) += snd-soc-pxa2xx.o
+obj-$(CONFIG_SND_PXA2XX_SOC_AC97) += snd-soc-pxa2xx-ac97.o
+obj-$(CONFIG_SND_PXA2XX_SOC_I2S) += snd-soc-pxa2xx-i2s.o
+obj-$(CONFIG_SND_PXA_SOC_SSP) += snd-soc-pxa-ssp.o
+obj-$(CONFIG_SND_MMP_SOC_SSPA) += snd-soc-mmp-sspa.o
+obj-$(CONFIG_SND_PXA2XX_LIB)   += snd-soc-pxa2xx-lib.o
+
+# PXA Machine Support
+snd-soc-spitz-y := spitz.o
+obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o

linux-7.2.3/sound/soc/pxa/mmp-sspa.c

@@ -0,0 +1,585 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * linux/sound/soc/pxa/mmp-sspa.c
+ * Base on pxa2xx-ssp.c
+ *
+ * Copyright (C) 2011 Marvell International Ltd.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/dmaengine.h>
+#include <linux/pm_runtime.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
+#include "pxa2xx-lib.h"
+#include "mmp-sspa.h"
+
+/*
+ * SSPA audio private data
+ */
+struct sspa_priv {
+	void __iomem *tx_base;
+	void __iomem *rx_base;
+
+	struct snd_dmaengine_dai_dma_data playback_dma_data;
+	struct snd_dmaengine_dai_dma_data capture_dma_data;
+	struct clk *clk;
+	struct clk *audio_clk;
+	struct clk *sysclk;
+
+	int running_cnt;
+	u32 sp;
+	u32 ctrl;
+};
+
+static void mmp_sspa_tx_enable(struct sspa_priv *sspa)
+{
+	unsigned int sspa_sp = sspa->sp;
+
+	sspa_sp &= ~SSPA_SP_MSL;
+	sspa_sp |= SSPA_SP_S_EN;
+	sspa_sp |= SSPA_SP_WEN;
+	__raw_writel(sspa_sp, sspa->tx_base + SSPA_SP);
+}
+
+static void mmp_sspa_tx_disable(struct sspa_priv *sspa)
+{
+	unsigned int sspa_sp = sspa->sp;
+
+	sspa_sp &= ~SSPA_SP_MSL;
+	sspa_sp &= ~SSPA_SP_S_EN;
+	sspa_sp |= SSPA_SP_WEN;
+	__raw_writel(sspa_sp, sspa->tx_base + SSPA_SP);
+}
+
+static void mmp_sspa_rx_enable(struct sspa_priv *sspa)
+{
+	unsigned int sspa_sp = sspa->sp;
+
+	sspa_sp |= SSPA_SP_S_EN;
+	sspa_sp |= SSPA_SP_WEN;
+	__raw_writel(sspa_sp, sspa->rx_base + SSPA_SP);
+}
+
+static void mmp_sspa_rx_disable(struct sspa_priv *sspa)
+{
+	unsigned int sspa_sp = sspa->sp;
+
+	sspa_sp &= ~SSPA_SP_S_EN;
+	sspa_sp |= SSPA_SP_WEN;
+	__raw_writel(sspa_sp, sspa->rx_base + SSPA_SP);
+}
+
+static int mmp_sspa_startup(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai);
+
+	clk_prepare_enable(sspa->sysclk);
+	clk_prepare_enable(sspa->clk);
+
+	return 0;
+}
+
+static void mmp_sspa_shutdown(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai);
+
+	clk_disable_unprepare(sspa->clk);
+	clk_disable_unprepare(sspa->sysclk);
+}
+
+/*
+ * Set the SSP ports SYSCLK.
+ */
+static int mmp_sspa_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+				    int clk_id, unsigned int freq, int dir)
+{
+	struct sspa_priv *sspa = snd_soc_dai_get_drvdata(cpu_dai);
+	struct device *dev = cpu_dai->component->dev;
+	int ret = 0;
+
+	if (dev->of_node)
+		return -ENOTSUPP;
+
+	switch (clk_id) {
+	case MMP_SSPA_CLK_AUDIO:
+		ret = clk_set_rate(sspa->audio_clk, freq);
+		if (ret)
+			return ret;
+		break;
+	case MMP_SSPA_CLK_PLL:
+	case MMP_SSPA_CLK_VCXO:
+		/* not support yet */
+		return -EINVAL;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mmp_sspa_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id,
+				 int source, unsigned int freq_in,
+				 unsigned int freq_out)
+{
+	struct sspa_priv *sspa = snd_soc_dai_get_drvdata(cpu_dai);
+	struct device *dev = cpu_dai->component->dev;
+	int ret = 0;
+
+	if (dev->of_node)
+		return -ENOTSUPP;
+
+	switch (pll_id) {
+	case MMP_SYSCLK:
+		ret = clk_set_rate(sspa->sysclk, freq_out);
+		if (ret)
+			return ret;
+		break;
+	case MMP_SSPA_CLK:
+		ret = clk_set_rate(sspa->clk, freq_out);
+		if (ret)
+			return ret;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/*
+ * Set up the sspa dai format.
+ */
+static int mmp_sspa_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+				 unsigned int fmt)
+{
+	struct sspa_priv *sspa = snd_soc_dai_get_drvdata(cpu_dai);
+
+	/* reset port settings */
+	sspa->sp   = SSPA_SP_WEN | SSPA_SP_S_RST | SSPA_SP_FFLUSH;
+	sspa->ctrl = 0;
+
+	switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+	case SND_SOC_DAIFMT_BP_FP:
+		sspa->sp |= SSPA_SP_MSL;
+		break;
+	case SND_SOC_DAIFMT_BC_FC:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		sspa->sp |= SSPA_SP_FSP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		sspa->ctrl |= SSPA_CTL_XDATDLY(1);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Since we are configuring the timings for the format by hand
+	 * we have to defer some things until hw_params() where we
+	 * know parameters like the sample size.
+	 */
+	return 0;
+}
+
+/*
+ * Set the SSPA audio DMA parameters and sample size.
+ * Can be called multiple times by oss emulation.
+ */
+static int mmp_sspa_hw_params(struct snd_pcm_substream *substream,
+			       struct snd_pcm_hw_params *params,
+			       struct snd_soc_dai *dai)
+{
+	struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai);
+	struct device *dev = dai->component->dev;
+	u32 sspa_ctrl = sspa->ctrl;
+	int bits;
+	int bitval;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		bits = 8;
+		bitval = SSPA_CTL_8_BITS;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		bits = 16;
+		bitval = SSPA_CTL_16_BITS;
+		break;
+	case SNDRV_PCM_FORMAT_S24_3LE:
+		bits = 24;
+		bitval = SSPA_CTL_24_BITS;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		bits = 32;
+		bitval = SSPA_CTL_32_BITS;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	sspa_ctrl &= ~SSPA_CTL_XPH;
+	if (dev->of_node || params_channels(params) == 2)
+		sspa_ctrl |= SSPA_CTL_XPH;
+
+	sspa_ctrl &= ~SSPA_CTL_XWDLEN1_MASK;
+	sspa_ctrl |= SSPA_CTL_XWDLEN1(bitval);
+
+	sspa_ctrl &= ~SSPA_CTL_XWDLEN2_MASK;
+	sspa_ctrl |= SSPA_CTL_XWDLEN2(bitval);
+
+	sspa_ctrl &= ~SSPA_CTL_XSSZ1_MASK;
+	sspa_ctrl |= SSPA_CTL_XSSZ1(bitval);
+
+	sspa_ctrl &= ~SSPA_CTL_XSSZ2_MASK;
+	sspa_ctrl |= SSPA_CTL_XSSZ2(bitval);
+
+	sspa->sp &= ~SSPA_SP_FWID_MASK;
+	sspa->sp |= SSPA_SP_FWID(bits - 1);
+
+	sspa->sp &= ~SSPA_TXSP_FPER_MASK;
+	sspa->sp |= SSPA_TXSP_FPER(bits * 2 - 1);
+
+	if (dev->of_node) {
+		clk_set_rate(sspa->clk, params_rate(params) *
+					params_channels(params) * bits);
+	}
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		__raw_writel(sspa_ctrl, sspa->tx_base + SSPA_CTL);
+		__raw_writel(0x1, sspa->tx_base + SSPA_FIFO_UL);
+	} else {
+		__raw_writel(sspa_ctrl, sspa->rx_base + SSPA_CTL);
+		__raw_writel(0x0, sspa->rx_base + SSPA_FIFO_UL);
+	}
+
+	return 0;
+}
+
+static int mmp_sspa_trigger(struct snd_pcm_substream *substream, int cmd,
+			     struct snd_soc_dai *dai)
+{
+	struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai);
+	int ret = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		/*
+		 * whatever playback or capture, must enable rx.
+		 * this is a hw issue, so need check if rx has been
+		 * enabled or not; if has been enabled by another
+		 * stream, do not enable again.
+		 */
+		if (!sspa->running_cnt)
+			mmp_sspa_rx_enable(sspa);
+
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			mmp_sspa_tx_enable(sspa);
+
+		sspa->running_cnt++;
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		sspa->running_cnt--;
+
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			mmp_sspa_tx_disable(sspa);
+
+		/* have no capture stream, disable rx port */
+		if (!sspa->running_cnt)
+			mmp_sspa_rx_disable(sspa);
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int mmp_sspa_probe(struct snd_soc_dai *dai)
+{
+	struct sspa_priv *sspa = dev_get_drvdata(dai->dev);
+
+	snd_soc_dai_init_dma_data(dai,
+				&sspa->playback_dma_data,
+				&sspa->capture_dma_data);
+
+	return 0;
+}
+
+#define MMP_SSPA_RATES SNDRV_PCM_RATE_8000_192000
+#define MMP_SSPA_FORMATS (SNDRV_PCM_FMTBIT_S8 | \
+		SNDRV_PCM_FMTBIT_S16_LE | \
+		SNDRV_PCM_FMTBIT_S24_3LE | \
+		SNDRV_PCM_FMTBIT_S32_LE)
+
+static const struct snd_soc_dai_ops mmp_sspa_dai_ops = {
+	.probe		= mmp_sspa_probe,
+	.startup	= mmp_sspa_startup,
+	.shutdown	= mmp_sspa_shutdown,
+	.trigger	= mmp_sspa_trigger,
+	.hw_params	= mmp_sspa_hw_params,
+	.set_sysclk	= mmp_sspa_set_dai_sysclk,
+	.set_pll	= mmp_sspa_set_dai_pll,
+	.set_fmt	= mmp_sspa_set_dai_fmt,
+};
+
+static struct snd_soc_dai_driver mmp_sspa_dai = {
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 128,
+		.rates = MMP_SSPA_RATES,
+		.formats = MMP_SSPA_FORMATS,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = MMP_SSPA_RATES,
+		.formats = MMP_SSPA_FORMATS,
+	},
+	.ops = &mmp_sspa_dai_ops,
+};
+
+#define MMP_PCM_INFO (SNDRV_PCM_INFO_MMAP |	\
+		SNDRV_PCM_INFO_MMAP_VALID |	\
+		SNDRV_PCM_INFO_INTERLEAVED |	\
+		SNDRV_PCM_INFO_PAUSE |		\
+		SNDRV_PCM_INFO_RESUME |		\
+		SNDRV_PCM_INFO_NO_PERIOD_WAKEUP)
+
+static const struct snd_pcm_hardware mmp_pcm_hardware[] = {
+	{
+		.info			= MMP_PCM_INFO,
+		.period_bytes_min	= 1024,
+		.period_bytes_max	= 2048,
+		.periods_min		= 2,
+		.periods_max		= 32,
+		.buffer_bytes_max	= 4096,
+		.fifo_size		= 32,
+	},
+	{
+		.info			= MMP_PCM_INFO,
+		.period_bytes_min	= 1024,
+		.period_bytes_max	= 2048,
+		.periods_min		= 2,
+		.periods_max		= 32,
+		.buffer_bytes_max	= 4096,
+		.fifo_size		= 32,
+	},
+};
+
+static const struct snd_dmaengine_pcm_config mmp_pcm_config = {
+	.prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
+	.pcm_hardware = mmp_pcm_hardware,
+	.prealloc_buffer_size = 4096,
+};
+
+static int mmp_pcm_mmap(struct snd_soc_component *component,
+			struct snd_pcm_substream *substream,
+			struct vm_area_struct *vma)
+{
+	vm_flags_set(vma, VM_DONTEXPAND | VM_DONTDUMP);
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	return remap_pfn_range(vma, vma->vm_start,
+		substream->dma_buffer.addr >> PAGE_SHIFT,
+		vma->vm_end - vma->vm_start, vma->vm_page_prot);
+}
+
+static int mmp_sspa_open(struct snd_soc_component *component,
+			 struct snd_pcm_substream *substream)
+{
+	struct sspa_priv *sspa = snd_soc_component_get_drvdata(component);
+
+	pm_runtime_get_sync(component->dev);
+
+	/* we can only change the settings if the port is not in use */
+	if ((__raw_readl(sspa->tx_base + SSPA_SP) & SSPA_SP_S_EN) ||
+	    (__raw_readl(sspa->rx_base + SSPA_SP) & SSPA_SP_S_EN)) {
+		dev_err(component->dev,
+			"can't change hardware dai format: stream is in use\n");
+		return -EBUSY;
+	}
+
+	__raw_writel(sspa->sp, sspa->tx_base + SSPA_SP);
+	__raw_writel(sspa->sp, sspa->rx_base + SSPA_SP);
+
+	sspa->sp &= ~(SSPA_SP_S_RST | SSPA_SP_FFLUSH);
+	__raw_writel(sspa->sp, sspa->tx_base + SSPA_SP);
+	__raw_writel(sspa->sp, sspa->rx_base + SSPA_SP);
+
+	/*
+	 * FIXME: hw issue, for the tx serial port,
+	 * can not config the master/slave mode;
+	 * so must clean this bit.
+	 * The master/slave mode has been set in the
+	 * rx port.
+	 */
+	__raw_writel(sspa->sp & ~SSPA_SP_MSL, sspa->tx_base + SSPA_SP);
+
+	__raw_writel(sspa->ctrl, sspa->tx_base + SSPA_CTL);
+	__raw_writel(sspa->ctrl, sspa->rx_base + SSPA_CTL);
+
+	return 0;
+}
+
+static int mmp_sspa_close(struct snd_soc_component *component,
+			  struct snd_pcm_substream *substream)
+{
+	pm_runtime_put_sync(component->dev);
+	return 0;
+}
+
+static const struct snd_soc_component_driver mmp_sspa_component = {
+	.name			= "mmp-sspa",
+	.mmap			= mmp_pcm_mmap,
+	.open			= mmp_sspa_open,
+	.close			= mmp_sspa_close,
+	.legacy_dai_naming	= 1,
+};
+
+static int asoc_mmp_sspa_probe(struct platform_device *pdev)
+{
+	struct sspa_priv *sspa;
+	int ret;
+
+	sspa = devm_kzalloc(&pdev->dev,
+				sizeof(struct sspa_priv), GFP_KERNEL);
+	if (!sspa)
+		return -ENOMEM;
+
+	if (pdev->dev.of_node) {
+		sspa->rx_base = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(sspa->rx_base))
+			return PTR_ERR(sspa->rx_base);
+
+		sspa->tx_base = devm_platform_ioremap_resource(pdev, 1);
+		if (IS_ERR(sspa->tx_base))
+			return PTR_ERR(sspa->tx_base);
+
+		sspa->clk = devm_clk_get(&pdev->dev, "bitclk");
+		if (IS_ERR(sspa->clk))
+			return PTR_ERR(sspa->clk);
+
+		sspa->audio_clk = devm_clk_get(&pdev->dev, "audio");
+		if (IS_ERR(sspa->audio_clk))
+			return PTR_ERR(sspa->audio_clk);
+	} else {
+		struct resource *res;
+
+		res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+		if (res == NULL)
+			return -ENODEV;
+
+		sspa->rx_base = devm_ioremap(&pdev->dev, res->start, 0x30);
+		if (!sspa->rx_base)
+			return -ENOMEM;
+
+		sspa->tx_base = devm_ioremap(&pdev->dev,
+					     res->start + 0x80, 0x30);
+		if (!sspa->tx_base)
+			return -ENOMEM;
+
+		sspa->clk = devm_clk_get(&pdev->dev, NULL);
+		if (IS_ERR(sspa->clk))
+			return PTR_ERR(sspa->clk);
+
+		sspa->audio_clk = clk_get(NULL, "mmp-audio");
+		if (IS_ERR(sspa->audio_clk))
+			return PTR_ERR(sspa->audio_clk);
+
+		sspa->sysclk = clk_get(NULL, "mmp-sysclk");
+		if (IS_ERR(sspa->sysclk)) {
+			clk_put(sspa->audio_clk);
+			return PTR_ERR(sspa->sysclk);
+		}
+	}
+	platform_set_drvdata(pdev, sspa);
+
+	sspa->playback_dma_data.maxburst = 4;
+	sspa->capture_dma_data.maxburst = 4;
+	/* You know, these addresses are actually ignored. */
+	sspa->capture_dma_data.addr = SSPA_D;
+	sspa->playback_dma_data.addr = 0x80 + SSPA_D;
+
+	if (pdev->dev.of_node) {
+		ret = devm_snd_dmaengine_pcm_register(&pdev->dev,
+						      &mmp_pcm_config, 0);
+		if (ret)
+			return ret;
+	}
+
+	ret = devm_snd_soc_register_component(&pdev->dev, &mmp_sspa_component,
+					      &mmp_sspa_dai, 1);
+	if (ret)
+		return ret;
+
+	pm_runtime_enable(&pdev->dev);
+	clk_prepare_enable(sspa->audio_clk);
+
+	return 0;
+}
+
+static void asoc_mmp_sspa_remove(struct platform_device *pdev)
+{
+	struct sspa_priv *sspa = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(sspa->audio_clk);
+	pm_runtime_disable(&pdev->dev);
+
+	if (pdev->dev.of_node)
+		return;
+
+	clk_put(sspa->audio_clk);
+	clk_put(sspa->sysclk);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id mmp_sspa_of_match[] = {
+	{ .compatible = "marvell,mmp-sspa" },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, mmp_sspa_of_match);
+#endif
+
+static struct platform_driver asoc_mmp_sspa_driver = {
+	.driver = {
+		.name = "mmp-sspa-dai",
+		.of_match_table = of_match_ptr(mmp_sspa_of_match),
+	},
+	.probe = asoc_mmp_sspa_probe,
+	.remove = asoc_mmp_sspa_remove,
+};
+
+module_platform_driver(asoc_mmp_sspa_driver);
+
+MODULE_AUTHOR("Leo Yan <leoy@marvell.com>");
+MODULE_DESCRIPTION("MMP SSPA SoC Interface");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mmp-sspa-dai");

linux-7.2.3/sound/soc/pxa/mmp-sspa.h

@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * linux/sound/soc/pxa/mmp-sspa.h
+ *
+ * Copyright (C) 2011 Marvell International Ltd.
+ */
+#ifndef _MMP_SSPA_H
+#define _MMP_SSPA_H
+
+/*
+ * SSPA Registers
+ */
+#define SSPA_D			(0x00)
+#define SSPA_ID			(0x04)
+#define SSPA_CTL		(0x08)
+#define SSPA_SP			(0x0c)
+#define SSPA_FIFO_UL		(0x10)
+#define SSPA_INT_MASK		(0x14)
+#define SSPA_C			(0x18)
+#define SSPA_FIFO_NOFS		(0x1c)
+#define SSPA_FIFO_SIZE		(0x20)
+
+/* SSPA Control Register */
+#define	SSPA_CTL_XPH		(1 << 31)	/* Read Phase */
+#define	SSPA_CTL_XFIG		(1 << 15)	/* Transmit Zeros when FIFO Empty */
+#define	SSPA_CTL_JST		(1 << 3)	/* Audio Sample Justification */
+#define	SSPA_CTL_XFRLEN2_MASK	(7 << 24)
+#define	SSPA_CTL_XFRLEN2(x)	((x) << 24)	/* Transmit Frame Length in Phase 2 */
+#define	SSPA_CTL_XWDLEN2_MASK	(7 << 21)
+#define	SSPA_CTL_XWDLEN2(x)	((x) << 21)	/* Transmit Word Length in Phase 2 */
+#define	SSPA_CTL_XDATDLY(x)	((x) << 19)	/* Transmit Data Delay */
+#define	SSPA_CTL_XSSZ2_MASK	(7 << 16)
+#define	SSPA_CTL_XSSZ2(x)	((x) << 16)	/* Transmit Sample Audio Size */
+#define	SSPA_CTL_XFRLEN1_MASK	(7 << 8)
+#define	SSPA_CTL_XFRLEN1(x)	((x) << 8)	/* Transmit Frame Length in Phase 1 */
+#define	SSPA_CTL_XWDLEN1_MASK	(7 << 5)
+#define	SSPA_CTL_XWDLEN1(x)	((x) << 5)	/* Transmit Word Length in Phase 1 */
+#define	SSPA_CTL_XSSZ1_MASK	(7 << 0)
+#define	SSPA_CTL_XSSZ1(x)	((x) << 0)	/* XSSZ1 */
+
+#define SSPA_CTL_8_BITS		(0x0)		/* Sample Size */
+#define SSPA_CTL_12_BITS	(0x1)
+#define SSPA_CTL_16_BITS	(0x2)
+#define SSPA_CTL_20_BITS	(0x3)
+#define SSPA_CTL_24_BITS	(0x4)
+#define SSPA_CTL_32_BITS	(0x5)
+
+/* SSPA Serial Port Register */
+#define	SSPA_SP_WEN		(1 << 31)	/* Write Configuration Enable */
+#define	SSPA_SP_MSL		(1 << 18)	/* Master Slave Configuration */
+#define	SSPA_SP_CLKP		(1 << 17)	/* CLKP Polarity Clock Edge Select */
+#define	SSPA_SP_FSP		(1 << 16)	/* FSP Polarity Clock Edge Select */
+#define	SSPA_SP_FFLUSH		(1 << 2)	/* FIFO Flush */
+#define	SSPA_SP_S_RST		(1 << 1)	/* Active High Reset Signal */
+#define	SSPA_SP_S_EN		(1 << 0)	/* Serial Clock Domain Enable */
+#define	SSPA_SP_FWID_MASK	(0x3f << 20)
+#define	SSPA_SP_FWID(x)		((x) << 20)	/* Frame-Sync Width */
+#define	SSPA_TXSP_FPER_MASK	(0x3f << 4)
+#define	SSPA_TXSP_FPER(x)	((x) << 4)	/* Frame-Sync Active */
+
+/* sspa clock sources */
+#define MMP_SSPA_CLK_PLL	0
+#define MMP_SSPA_CLK_VCXO	1
+#define MMP_SSPA_CLK_AUDIO	3
+
+/* sspa pll id */
+#define MMP_SYSCLK		0
+#define MMP_SSPA_CLK		1
+
+#endif /* _MMP_SSPA_H */

linux-7.2.3/sound/soc/pxa/pxa-ssp.c

@@ -0,0 +1,887 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * pxa-ssp.c  --  ALSA Soc Audio Layer
+ *
+ * Copyright 2005,2008 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ *         Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * TODO:
+ *  o Test network mode for > 16bit sample size
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pxa2xx_ssp.h>
+#include <linux/of.h>
+#include <linux/dmaengine.h>
+
+#include <asm/irq.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
+
+#include "pxa2xx-lib.h"
+#include "pxa-ssp.h"
+
+/*
+ * SSP audio private data
+ */
+struct ssp_priv {
+	struct ssp_device *ssp;
+	struct clk *extclk;
+	unsigned long ssp_clk;
+	unsigned int sysclk;
+	unsigned int dai_fmt;
+	unsigned int configured_dai_fmt;
+#ifdef CONFIG_PM
+	uint32_t	cr0;
+	uint32_t	cr1;
+	uint32_t	to;
+	uint32_t	psp;
+#endif
+};
+
+static void dump_registers(struct ssp_device *ssp)
+{
+	dev_dbg(ssp->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
+		 pxa_ssp_read_reg(ssp, SSCR0), pxa_ssp_read_reg(ssp, SSCR1),
+		 pxa_ssp_read_reg(ssp, SSTO));
+
+	dev_dbg(ssp->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n",
+		 pxa_ssp_read_reg(ssp, SSPSP), pxa_ssp_read_reg(ssp, SSSR),
+		 pxa_ssp_read_reg(ssp, SSACD));
+}
+
+static void pxa_ssp_set_dma_params(struct ssp_device *ssp, int width4,
+			int out, struct snd_dmaengine_dai_dma_data *dma)
+{
+	dma->addr_width = width4 ? DMA_SLAVE_BUSWIDTH_4_BYTES :
+				   DMA_SLAVE_BUSWIDTH_2_BYTES;
+	dma->maxburst = 16;
+	dma->addr = ssp->phys_base + SSDR;
+}
+
+static int pxa_ssp_startup(struct snd_pcm_substream *substream,
+			   struct snd_soc_dai *cpu_dai)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct ssp_device *ssp = priv->ssp;
+	struct snd_dmaengine_dai_dma_data *dma;
+	int ret = 0;
+
+	if (!snd_soc_dai_active(cpu_dai)) {
+		clk_prepare_enable(ssp->clk);
+		pxa_ssp_disable(ssp);
+	}
+
+	clk_prepare_enable(priv->extclk);
+
+	dma = kzalloc_obj(struct snd_dmaengine_dai_dma_data);
+	if (!dma)
+		return -ENOMEM;
+	dma->chan_name = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+		"tx" : "rx";
+
+	snd_soc_dai_set_dma_data(cpu_dai, substream, dma);
+
+	return ret;
+}
+
+static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
+			     struct snd_soc_dai *cpu_dai)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct ssp_device *ssp = priv->ssp;
+
+	if (!snd_soc_dai_active(cpu_dai)) {
+		pxa_ssp_disable(ssp);
+		clk_disable_unprepare(ssp->clk);
+	}
+
+	clk_disable_unprepare(priv->extclk);
+
+	kfree(snd_soc_dai_get_dma_data(cpu_dai, substream));
+	snd_soc_dai_set_dma_data(cpu_dai, substream, NULL);
+}
+
+#ifdef CONFIG_PM
+
+static int pxa_ssp_suspend(struct snd_soc_component *component)
+{
+	struct ssp_priv *priv = snd_soc_component_get_drvdata(component);
+	struct ssp_device *ssp = priv->ssp;
+
+	if (!snd_soc_component_active(component))
+		clk_prepare_enable(ssp->clk);
+
+	priv->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
+	priv->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
+	priv->to  = __raw_readl(ssp->mmio_base + SSTO);
+	priv->psp = __raw_readl(ssp->mmio_base + SSPSP);
+
+	pxa_ssp_disable(ssp);
+	clk_disable_unprepare(ssp->clk);
+	return 0;
+}
+
+static int pxa_ssp_resume(struct snd_soc_component *component)
+{
+	struct ssp_priv *priv = snd_soc_component_get_drvdata(component);
+	struct ssp_device *ssp = priv->ssp;
+	uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
+
+	clk_prepare_enable(ssp->clk);
+
+	__raw_writel(sssr, ssp->mmio_base + SSSR);
+	__raw_writel(priv->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
+	__raw_writel(priv->cr1, ssp->mmio_base + SSCR1);
+	__raw_writel(priv->to,  ssp->mmio_base + SSTO);
+	__raw_writel(priv->psp, ssp->mmio_base + SSPSP);
+
+	if (snd_soc_component_active(component))
+		pxa_ssp_enable(ssp);
+	else
+		clk_disable_unprepare(ssp->clk);
+
+	return 0;
+}
+
+#else
+#define pxa_ssp_suspend	NULL
+#define pxa_ssp_resume	NULL
+#endif
+
+/*
+ * ssp_set_clkdiv - set SSP clock divider
+ * @div: serial clock rate divider
+ */
+static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div)
+{
+	u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
+
+	if (ssp->type == PXA25x_SSP) {
+		sscr0 &= ~0x0000ff00;
+		sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
+	} else {
+		sscr0 &= ~0x000fff00;
+		sscr0 |= (div - 1) << 8;     /* 1..4096 */
+	}
+	pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+}
+
+/*
+ * Set the SSP ports SYSCLK.
+ */
+static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+	int clk_id, unsigned int freq, int dir)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct ssp_device *ssp = priv->ssp;
+
+	u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0) &
+		~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
+
+	if (priv->extclk) {
+		int ret;
+
+		/*
+		 * For DT based boards, if an extclk is given, use it
+		 * here and configure PXA_SSP_CLK_EXT.
+		 */
+
+		ret = clk_set_rate(priv->extclk, freq);
+		if (ret < 0)
+			return ret;
+
+		clk_id = PXA_SSP_CLK_EXT;
+	}
+
+	dev_dbg(ssp->dev,
+		"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n",
+		cpu_dai->id, clk_id, freq);
+
+	switch (clk_id) {
+	case PXA_SSP_CLK_NET_PLL:
+		sscr0 |= SSCR0_MOD;
+		break;
+	case PXA_SSP_CLK_PLL:
+		/* Internal PLL is fixed */
+		if (ssp->type == PXA25x_SSP)
+			priv->sysclk = 1843200;
+		else
+			priv->sysclk = 13000000;
+		break;
+	case PXA_SSP_CLK_EXT:
+		priv->sysclk = freq;
+		sscr0 |= SSCR0_ECS;
+		break;
+	case PXA_SSP_CLK_NET:
+		priv->sysclk = freq;
+		sscr0 |= SSCR0_NCS | SSCR0_MOD;
+		break;
+	case PXA_SSP_CLK_AUDIO:
+		priv->sysclk = 0;
+		pxa_ssp_set_scr(ssp, 1);
+		sscr0 |= SSCR0_ACS;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	/* The SSP clock must be disabled when changing SSP clock mode
+	 * on PXA2xx.  On PXA3xx it must be enabled when doing so. */
+	if (ssp->type != PXA3xx_SSP)
+		clk_disable_unprepare(ssp->clk);
+	pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+	if (ssp->type != PXA3xx_SSP)
+		clk_prepare_enable(ssp->clk);
+
+	return 0;
+}
+
+/*
+ * Configure the PLL frequency pxa27x and (afaik - pxa320 only)
+ */
+static int pxa_ssp_set_pll(struct ssp_priv *priv, unsigned int freq)
+{
+	struct ssp_device *ssp = priv->ssp;
+	u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70;
+
+	if (ssp->type == PXA3xx_SSP)
+		pxa_ssp_write_reg(ssp, SSACDD, 0);
+
+	switch (freq) {
+	case 5622000:
+		break;
+	case 11345000:
+		ssacd |= (0x1 << 4);
+		break;
+	case 12235000:
+		ssacd |= (0x2 << 4);
+		break;
+	case 14857000:
+		ssacd |= (0x3 << 4);
+		break;
+	case 32842000:
+		ssacd |= (0x4 << 4);
+		break;
+	case 48000000:
+		ssacd |= (0x5 << 4);
+		break;
+	case 0:
+		/* Disable */
+		break;
+
+	default:
+		/* PXA3xx has a clock ditherer which can be used to generate
+		 * a wider range of frequencies - calculate a value for it.
+		 */
+		if (ssp->type == PXA3xx_SSP) {
+			u32 val;
+			u64 tmp = 19968;
+
+			tmp *= 1000000;
+			do_div(tmp, freq);
+			val = tmp;
+
+			val = (val << 16) | 64;
+			pxa_ssp_write_reg(ssp, SSACDD, val);
+
+			ssacd |= (0x6 << 4);
+
+			dev_dbg(ssp->dev,
+				"Using SSACDD %x to supply %uHz\n",
+				val, freq);
+			break;
+		}
+
+		return -EINVAL;
+	}
+
+	pxa_ssp_write_reg(ssp, SSACD, ssacd);
+
+	return 0;
+}
+
+/*
+ * Set the active slots in TDM/Network mode
+ */
+static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
+	unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct ssp_device *ssp = priv->ssp;
+	u32 sscr0;
+
+	sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
+	sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS);
+
+	/* set slot width */
+	if (slot_width > 16)
+		sscr0 |= SSCR0_EDSS | SSCR0_DataSize(slot_width - 16);
+	else
+		sscr0 |= SSCR0_DataSize(slot_width);
+
+	if (slots > 1) {
+		/* enable network mode */
+		sscr0 |= SSCR0_MOD;
+
+		/* set number of active slots */
+		sscr0 |= SSCR0_SlotsPerFrm(slots);
+
+		/* set active slot mask */
+		pxa_ssp_write_reg(ssp, SSTSA, tx_mask);
+		pxa_ssp_write_reg(ssp, SSRSA, rx_mask);
+	}
+	pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+
+	return 0;
+}
+
+/*
+ * Tristate the SSP DAI lines
+ */
+static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai,
+	int tristate)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct ssp_device *ssp = priv->ssp;
+	u32 sscr1;
+
+	sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
+	if (tristate)
+		sscr1 &= ~SSCR1_TTE;
+	else
+		sscr1 |= SSCR1_TTE;
+	pxa_ssp_write_reg(ssp, SSCR1, sscr1);
+
+	return 0;
+}
+
+static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+			       unsigned int fmt)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+
+	switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+	case SND_SOC_DAIFMT_BC_FC:
+	case SND_SOC_DAIFMT_BC_FP:
+	case SND_SOC_DAIFMT_BP_FP:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+	case SND_SOC_DAIFMT_NB_IF:
+	case SND_SOC_DAIFMT_IB_IF:
+	case SND_SOC_DAIFMT_IB_NF:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	/* Settings will be applied in hw_params() */
+	priv->dai_fmt = fmt;
+
+	return 0;
+}
+
+/*
+ * Set up the SSP DAI format.
+ * The SSP Port must be inactive before calling this function as the
+ * physical interface format is changed.
+ */
+static int pxa_ssp_configure_dai_fmt(struct ssp_priv *priv)
+{
+	struct ssp_device *ssp = priv->ssp;
+	u32 sscr0, sscr1, sspsp, scfr;
+
+	/* check if we need to change anything at all */
+	if (priv->configured_dai_fmt == priv->dai_fmt)
+		return 0;
+
+	/* reset port settings */
+	sscr0 = pxa_ssp_read_reg(ssp, SSCR0) &
+		~(SSCR0_PSP | SSCR0_MOD);
+	sscr1 = pxa_ssp_read_reg(ssp, SSCR1) &
+		~(SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR |
+		  SSCR1_RWOT | SSCR1_TRAIL | SSCR1_TFT | SSCR1_RFT);
+	sspsp = pxa_ssp_read_reg(ssp, SSPSP) &
+		~(SSPSP_SFRMP | SSPSP_SCMODE(3));
+
+	sscr1 |= SSCR1_RxTresh(8) | SSCR1_TxTresh(7);
+
+	switch (priv->dai_fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+	case SND_SOC_DAIFMT_BC_FC:
+		sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR;
+		break;
+	case SND_SOC_DAIFMT_BC_FP:
+		sscr1 |= SSCR1_SCLKDIR | SSCR1_SCFR;
+		break;
+	case SND_SOC_DAIFMT_BP_FP:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (priv->dai_fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		sspsp |= SSPSP_SFRMP;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		sspsp |= SSPSP_SCMODE(2);
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		sscr0 |= SSCR0_PSP;
+		sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;
+		/* See hw_params() */
+		break;
+
+	case SND_SOC_DAIFMT_DSP_A:
+		sspsp |= SSPSP_FSRT;
+		fallthrough;
+	case SND_SOC_DAIFMT_DSP_B:
+		sscr0 |= SSCR0_MOD | SSCR0_PSP;
+		sscr1 |= SSCR1_TRAIL | SSCR1_RWOT;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+	pxa_ssp_write_reg(ssp, SSCR1, sscr1);
+	pxa_ssp_write_reg(ssp, SSPSP, sspsp);
+
+	switch (priv->dai_fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+	case SND_SOC_DAIFMT_BC_FC:
+	case SND_SOC_DAIFMT_BC_FP:
+		scfr = pxa_ssp_read_reg(ssp, SSCR1) | SSCR1_SCFR;
+		pxa_ssp_write_reg(ssp, SSCR1, scfr);
+
+		while (pxa_ssp_read_reg(ssp, SSSR) & SSSR_BSY)
+			cpu_relax();
+		break;
+	}
+
+	dump_registers(ssp);
+
+	/* Since we are configuring the timings for the format by hand
+	 * we have to defer some things until hw_params() where we
+	 * know parameters like the sample size.
+	 */
+	priv->configured_dai_fmt = priv->dai_fmt;
+
+	return 0;
+}
+
+struct pxa_ssp_clock_mode {
+	int rate;
+	int pll;
+	u8 acds;
+	u8 scdb;
+};
+
+static const struct pxa_ssp_clock_mode pxa_ssp_clock_modes[] = {
+	{ .rate =  8000, .pll = 32842000, .acds = SSACD_ACDS_32, .scdb = SSACD_SCDB_4X },
+	{ .rate = 11025, .pll =  5622000, .acds = SSACD_ACDS_4,  .scdb = SSACD_SCDB_4X },
+	{ .rate = 16000, .pll = 32842000, .acds = SSACD_ACDS_16, .scdb = SSACD_SCDB_4X },
+	{ .rate = 22050, .pll =  5622000, .acds = SSACD_ACDS_2,  .scdb = SSACD_SCDB_4X },
+	{ .rate = 44100, .pll = 11345000, .acds = SSACD_ACDS_2,  .scdb = SSACD_SCDB_4X },
+	{ .rate = 48000, .pll = 12235000, .acds = SSACD_ACDS_2,  .scdb = SSACD_SCDB_4X },
+	{ .rate = 96000, .pll = 12235000, .acds = SSACD_ACDS_4,  .scdb = SSACD_SCDB_1X },
+	{}
+};
+
+/*
+ * Set the SSP audio DMA parameters and sample size.
+ * Can be called multiple times by oss emulation.
+ */
+static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *cpu_dai)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct ssp_device *ssp = priv->ssp;
+	int chn = params_channels(params);
+	u32 sscr0, sspsp;
+	int width = snd_pcm_format_physical_width(params_format(params));
+	int ttsa = pxa_ssp_read_reg(ssp, SSTSA) & 0xf;
+	struct snd_dmaengine_dai_dma_data *dma_data;
+	int rate = params_rate(params);
+	int bclk = rate * chn * (width / 8);
+	int ret;
+
+	dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream);
+
+	/* Network mode with one active slot (ttsa == 1) can be used
+	 * to force 16-bit frame width on the wire (for S16_LE), even
+	 * with two channels. Use 16-bit DMA transfers for this case.
+	 */
+	pxa_ssp_set_dma_params(ssp,
+		((chn == 2) && (ttsa != 1)) || (width == 32),
+		substream->stream == SNDRV_PCM_STREAM_PLAYBACK, dma_data);
+
+	/* we can only change the settings if the port is not in use */
+	if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
+		return 0;
+
+	ret = pxa_ssp_configure_dai_fmt(priv);
+	if (ret < 0)
+		return ret;
+
+	/* clear selected SSP bits */
+	sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS);
+
+	/* bit size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		if (ssp->type == PXA3xx_SSP)
+			sscr0 |= SSCR0_FPCKE;
+		sscr0 |= SSCR0_DataSize(16);
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8));
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16));
+		break;
+	}
+	pxa_ssp_write_reg(ssp, SSCR0, sscr0);
+
+	if (sscr0 & SSCR0_ACS) {
+		ret = pxa_ssp_set_pll(priv, bclk);
+
+		/*
+		 * If we were able to generate the bclk directly,
+		 * all is fine. Otherwise, look up the closest rate
+		 * from the table and also set the dividers.
+		 */
+
+		if (ret < 0) {
+			const struct pxa_ssp_clock_mode *m;
+			int ssacd;
+
+			for (m = pxa_ssp_clock_modes; m->rate; m++) {
+				if (m->rate == rate)
+					break;
+			}
+
+			if (!m->rate)
+				return -EINVAL;
+
+			ret = pxa_ssp_set_pll(priv, bclk);
+			if (ret < 0)
+				return ret;
+
+			ssacd = pxa_ssp_read_reg(ssp, SSACD);
+			ssacd &= ~(SSACD_ACDS(7) | SSACD_SCDB_1X);
+			ssacd |= SSACD_ACDS(m->acds);
+			ssacd |= m->scdb;
+			pxa_ssp_write_reg(ssp, SSACD, ssacd);
+		}
+	} else if (sscr0 & SSCR0_ECS) {
+		/*
+		 * For setups with external clocking, the PLL and its diviers
+		 * are not active. Instead, the SCR bits in SSCR0 can be used
+		 * to divide the clock.
+		 */
+		pxa_ssp_set_scr(ssp, bclk / rate);
+	}
+
+	switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+	       sspsp = pxa_ssp_read_reg(ssp, SSPSP);
+
+		if (((priv->sysclk / bclk) == 64) && (width == 16)) {
+			/* This is a special case where the bitclk is 64fs
+			 * and we're not dealing with 2*32 bits of audio
+			 * samples.
+			 *
+			 * The SSP values used for that are all found out by
+			 * trying and failing a lot; some of the registers
+			 * needed for that mode are only available on PXA3xx.
+			 */
+			if (ssp->type != PXA3xx_SSP)
+				return -EINVAL;
+
+			sspsp |= SSPSP_SFRMWDTH(width * 2);
+			sspsp |= SSPSP_SFRMDLY(width * 4);
+			sspsp |= SSPSP_EDMYSTOP(3);
+			sspsp |= SSPSP_DMYSTOP(3);
+			sspsp |= SSPSP_DMYSTRT(1);
+		} else {
+			/* The frame width is the width the LRCLK is
+			 * asserted for; the delay is expressed in
+			 * half cycle units.  We need the extra cycle
+			 * because the data starts clocking out one BCLK
+			 * after LRCLK changes polarity.
+			 */
+			sspsp |= SSPSP_SFRMWDTH(width + 1);
+			sspsp |= SSPSP_SFRMDLY((width + 1) * 2);
+			sspsp |= SSPSP_DMYSTRT(1);
+		}
+
+		pxa_ssp_write_reg(ssp, SSPSP, sspsp);
+		break;
+	default:
+		break;
+	}
+
+	/* When we use a network mode, we always require TDM slots
+	 * - complain loudly and fail if they've not been set up yet.
+	 */
+	if ((sscr0 & SSCR0_MOD) && !ttsa) {
+		dev_err(ssp->dev, "No TDM timeslot configured\n");
+		return -EINVAL;
+	}
+
+	dump_registers(ssp);
+
+	return 0;
+}
+
+static void pxa_ssp_set_running_bit(struct snd_pcm_substream *substream,
+				    struct ssp_device *ssp, int value)
+{
+	uint32_t sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
+	uint32_t sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
+	uint32_t sspsp = pxa_ssp_read_reg(ssp, SSPSP);
+	uint32_t sssr = pxa_ssp_read_reg(ssp, SSSR);
+
+	if (value && (sscr0 & SSCR0_SSE))
+		pxa_ssp_write_reg(ssp, SSCR0, sscr0 & ~SSCR0_SSE);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if (value)
+			sscr1 |= SSCR1_TSRE;
+		else
+			sscr1 &= ~SSCR1_TSRE;
+	} else {
+		if (value)
+			sscr1 |= SSCR1_RSRE;
+		else
+			sscr1 &= ~SSCR1_RSRE;
+	}
+
+	pxa_ssp_write_reg(ssp, SSCR1, sscr1);
+
+	if (value) {
+		pxa_ssp_write_reg(ssp, SSSR, sssr);
+		pxa_ssp_write_reg(ssp, SSPSP, sspsp);
+		pxa_ssp_write_reg(ssp, SSCR0, sscr0 | SSCR0_SSE);
+	}
+}
+
+static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd,
+			   struct snd_soc_dai *cpu_dai)
+{
+	int ret = 0;
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct ssp_device *ssp = priv->ssp;
+	int val;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_RESUME:
+		pxa_ssp_enable(ssp);
+		break;
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		pxa_ssp_set_running_bit(substream, ssp, 1);
+		val = pxa_ssp_read_reg(ssp, SSSR);
+		pxa_ssp_write_reg(ssp, SSSR, val);
+		break;
+	case SNDRV_PCM_TRIGGER_START:
+		pxa_ssp_set_running_bit(substream, ssp, 1);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		pxa_ssp_set_running_bit(substream, ssp, 0);
+		break;
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		pxa_ssp_disable(ssp);
+		break;
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		pxa_ssp_set_running_bit(substream, ssp, 0);
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	dump_registers(ssp);
+
+	return ret;
+}
+
+static int pxa_ssp_probe(struct snd_soc_dai *dai)
+{
+	struct device *dev = dai->dev;
+	struct ssp_priv *priv;
+	int ret;
+
+	priv = kzalloc_obj(struct ssp_priv);
+	if (!priv)
+		return -ENOMEM;
+
+	if (dev->of_node) {
+		struct device_node *ssp_handle;
+
+		ssp_handle = of_parse_phandle(dev->of_node, "port", 0);
+		if (!ssp_handle) {
+			dev_err(dev, "unable to get 'port' phandle\n");
+			ret = -ENODEV;
+			goto err_priv;
+		}
+
+		priv->ssp = pxa_ssp_request_of(ssp_handle, "SoC audio");
+		if (priv->ssp == NULL) {
+			ret = -ENODEV;
+			goto err_priv;
+		}
+
+		priv->extclk = devm_clk_get(dev, "extclk");
+		if (IS_ERR(priv->extclk)) {
+			ret = PTR_ERR(priv->extclk);
+			if (ret == -EPROBE_DEFER)
+				goto err_priv;
+
+			priv->extclk = NULL;
+		}
+	} else {
+		priv->ssp = pxa_ssp_request(dai->id + 1, "SoC audio");
+		if (priv->ssp == NULL) {
+			ret = -ENODEV;
+			goto err_priv;
+		}
+	}
+
+	priv->dai_fmt = (unsigned int) -1;
+	snd_soc_dai_set_drvdata(dai, priv);
+
+	return 0;
+
+err_priv:
+	kfree(priv);
+	return ret;
+}
+
+static int pxa_ssp_remove(struct snd_soc_dai *dai)
+{
+	struct ssp_priv *priv = snd_soc_dai_get_drvdata(dai);
+
+	pxa_ssp_free(priv->ssp);
+	kfree(priv);
+	return 0;
+}
+
+#define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+			  SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |	\
+			  SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |	\
+			  SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 |	\
+			  SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static const struct snd_soc_dai_ops pxa_ssp_dai_ops = {
+	.probe		= pxa_ssp_probe,
+	.remove		= pxa_ssp_remove,
+	.startup	= pxa_ssp_startup,
+	.shutdown	= pxa_ssp_shutdown,
+	.trigger	= pxa_ssp_trigger,
+	.hw_params	= pxa_ssp_hw_params,
+	.set_sysclk	= pxa_ssp_set_dai_sysclk,
+	.set_fmt	= pxa_ssp_set_dai_fmt,
+	.set_tdm_slot	= pxa_ssp_set_dai_tdm_slot,
+	.set_tristate	= pxa_ssp_set_dai_tristate,
+};
+
+static struct snd_soc_dai_driver pxa_ssp_dai = {
+		.playback = {
+			.channels_min = 1,
+			.channels_max = 8,
+			.rates = PXA_SSP_RATES,
+			.formats = PXA_SSP_FORMATS,
+		},
+		.capture = {
+			 .channels_min = 1,
+			 .channels_max = 8,
+			.rates = PXA_SSP_RATES,
+			.formats = PXA_SSP_FORMATS,
+		 },
+		.ops = &pxa_ssp_dai_ops,
+};
+
+static const struct snd_soc_component_driver pxa_ssp_component = {
+	.name			= "pxa-ssp",
+	.pcm_new		= pxa2xx_soc_pcm_new,
+	.open			= pxa2xx_soc_pcm_open,
+	.close			= pxa2xx_soc_pcm_close,
+	.hw_params		= pxa2xx_soc_pcm_hw_params,
+	.prepare		= pxa2xx_soc_pcm_prepare,
+	.trigger		= pxa2xx_soc_pcm_trigger,
+	.pointer		= pxa2xx_soc_pcm_pointer,
+	.suspend		= pxa_ssp_suspend,
+	.resume			= pxa_ssp_resume,
+	.legacy_dai_naming	= 1,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_ssp_of_ids[] = {
+	{ .compatible = "mrvl,pxa-ssp-dai" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids);
+#endif
+
+static int asoc_ssp_probe(struct platform_device *pdev)
+{
+	return devm_snd_soc_register_component(&pdev->dev, &pxa_ssp_component,
+					       &pxa_ssp_dai, 1);
+}
+
+static struct platform_driver asoc_ssp_driver = {
+	.driver = {
+		.name = "pxa-ssp-dai",
+		.of_match_table = of_match_ptr(pxa_ssp_of_ids),
+	},
+
+	.probe = asoc_ssp_probe,
+};
+
+module_platform_driver(asoc_ssp_driver);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("PXA SSP/PCM SoC Interface");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa-ssp-dai");

linux-7.2.3/sound/soc/pxa/pxa-ssp.h

@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ASoC PXA SSP port support
+ */
+
+#ifndef _PXA_SSP_H
+#define _PXA_SSP_H
+
+/* SSP clock sources */
+#define PXA_SSP_CLK_PLL	0
+#define PXA_SSP_CLK_EXT	1
+#define PXA_SSP_CLK_NET	2
+#define PXA_SSP_CLK_AUDIO	3
+#define PXA_SSP_CLK_NET_PLL	4
+
+/* SSP audio dividers */
+#define PXA_SSP_AUDIO_DIV_ACDS		0
+#define PXA_SSP_AUDIO_DIV_SCDB		1
+#define PXA_SSP_DIV_SCR				2
+
+/* SSP ACDS audio dividers values */
+#define PXA_SSP_CLK_AUDIO_DIV_1		0
+#define PXA_SSP_CLK_AUDIO_DIV_2		1
+#define PXA_SSP_CLK_AUDIO_DIV_4		2
+#define PXA_SSP_CLK_AUDIO_DIV_8		3
+#define PXA_SSP_CLK_AUDIO_DIV_16	4
+#define PXA_SSP_CLK_AUDIO_DIV_32	5
+
+/* SSP divider bypass */
+#define PXA_SSP_CLK_SCDB_4		0
+#define PXA_SSP_CLK_SCDB_1		1
+#define PXA_SSP_CLK_SCDB_8		2
+
+#define PXA_SSP_PLL_OUT  0
+
+#endif

linux-7.2.3/sound/soc/pxa/pxa2xx-ac97-lib.c

@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on sound/arm/pxa2xx-ac97.c and sound/soc/pxa/pxa2xx-ac97.c
+ * which contain:
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Dec 02, 2004
+ * Copyright:	MontaVista Software Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/soc/pxa/cpu.h>
+
+#include <sound/pxa2xx-lib.h>
+
+#include <linux/platform_data/asoc-pxa.h>
+
+#include "pxa2xx-ac97-regs.h"
+#include "pxa2xx-lib.h"
+
+static DEFINE_MUTEX(car_mutex);
+static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
+static volatile long gsr_bits;
+static struct clk *ac97_clk;
+static struct clk *ac97conf_clk;
+struct gpio_desc *rst_gpio;
+static void __iomem *ac97_reg_base;
+
+/*
+ * Beware PXA27x bugs:
+ *
+ *   o Slot 12 read from modem space will hang controller.
+ *   o CDONE, SDONE interrupt fails after any slot 12 IO.
+ *
+ * We therefore have an hybrid approach for waiting on SDONE (interrupt or
+ * 1 jiffy timeout if interrupt never comes).
+ */
+
+int pxa2xx_ac97_read(int slot, unsigned short reg)
+{
+	int val = -ENODEV;
+	u32 __iomem *reg_addr;
+
+	if (slot > 0)
+		return -ENODEV;
+
+	guard(mutex)(&car_mutex);
+
+	/* set up primary or secondary codec space */
+	if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
+		reg_addr = ac97_reg_base +
+			   (slot ? SMC_REG_BASE : PMC_REG_BASE);
+	else
+		reg_addr = ac97_reg_base +
+			   (slot ? SAC_REG_BASE : PAC_REG_BASE);
+	reg_addr += (reg >> 1);
+
+	/* start read access across the ac97 link */
+	writel(GSR_CDONE | GSR_SDONE, ac97_reg_base + GSR);
+	gsr_bits = 0;
+	val = (readl(reg_addr) & 0xffff);
+	if (reg == AC97_GPIO_STATUS)
+		return val;
+	if (wait_event_timeout(gsr_wq, (readl(ac97_reg_base + GSR) | gsr_bits) & GSR_SDONE, 1) <= 0 &&
+	    !((readl(ac97_reg_base + GSR) | gsr_bits) & GSR_SDONE)) {
+		printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n",
+				__func__, reg, readl(ac97_reg_base + GSR) | gsr_bits);
+		return -ETIMEDOUT;
+	}
+
+	/* valid data now */
+	writel(GSR_CDONE | GSR_SDONE, ac97_reg_base + GSR);
+	gsr_bits = 0;
+	val = (readl(reg_addr) & 0xffff);
+	/* but we've just started another cycle... */
+	wait_event_timeout(gsr_wq, (readl(ac97_reg_base + GSR) | gsr_bits) & GSR_SDONE, 1);
+	return val;
+}
+
+int pxa2xx_ac97_write(int slot, unsigned short reg, unsigned short val)
+{
+	u32 __iomem *reg_addr;
+	int ret = 0;
+
+	guard(mutex)(&car_mutex);
+
+	/* set up primary or secondary codec space */
+	if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
+		reg_addr = ac97_reg_base +
+			   (slot ? SMC_REG_BASE : PMC_REG_BASE);
+	else
+		reg_addr = ac97_reg_base +
+			   (slot ? SAC_REG_BASE : PAC_REG_BASE);
+	reg_addr += (reg >> 1);
+
+	writel(GSR_CDONE | GSR_SDONE, ac97_reg_base + GSR);
+	gsr_bits = 0;
+	writel(val, reg_addr);
+	if (wait_event_timeout(gsr_wq, (readl(ac97_reg_base + GSR) | gsr_bits) & GSR_CDONE, 1) <= 0 &&
+	    !((readl(ac97_reg_base + GSR) | gsr_bits) & GSR_CDONE)) {
+		printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n",
+				__func__, reg, readl(ac97_reg_base + GSR) | gsr_bits);
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+#ifdef CONFIG_PXA25x
+static inline void pxa_ac97_warm_pxa25x(void)
+{
+	gsr_bits = 0;
+
+	writel(readl(ac97_reg_base + GCR) | (GCR_WARM_RST), ac97_reg_base + GCR);
+}
+
+static inline void pxa_ac97_cold_pxa25x(void)
+{
+	writel(readl(ac97_reg_base + GCR) & ( GCR_COLD_RST), ac97_reg_base + GCR);  /* clear everything but nCRST */
+	writel(readl(ac97_reg_base + GCR) & (~GCR_COLD_RST), ac97_reg_base + GCR);  /* then assert nCRST */
+
+	gsr_bits = 0;
+
+	writel(GCR_COLD_RST, ac97_reg_base + GCR);
+}
+#endif
+
+#ifdef CONFIG_PXA27x
+static inline void pxa_ac97_warm_pxa27x(void)
+{
+	gsr_bits = 0;
+
+	/* warm reset broken on Bulverde, so manually keep AC97 reset high */
+	pxa27x_configure_ac97reset(rst_gpio, true);
+	udelay(10);
+	writel(readl(ac97_reg_base + GCR) | (GCR_WARM_RST), ac97_reg_base + GCR);
+	pxa27x_configure_ac97reset(rst_gpio, false);
+	udelay(500);
+}
+
+static inline void pxa_ac97_cold_pxa27x(void)
+{
+	writel(readl(ac97_reg_base + GCR) & ( GCR_COLD_RST), ac97_reg_base + GCR);  /* clear everything but nCRST */
+	writel(readl(ac97_reg_base + GCR) & (~GCR_COLD_RST), ac97_reg_base + GCR);  /* then assert nCRST */
+
+	gsr_bits = 0;
+
+	/* PXA27x Developers Manual section 13.5.2.2.1 */
+	clk_prepare_enable(ac97conf_clk);
+	udelay(5);
+	clk_disable_unprepare(ac97conf_clk);
+	writel(GCR_COLD_RST | GCR_WARM_RST, ac97_reg_base + GCR);
+}
+#endif
+
+#ifdef CONFIG_PXA3xx
+static inline void pxa_ac97_warm_pxa3xx(void)
+{
+	gsr_bits = 0;
+
+	/* Can't use interrupts */
+	writel(readl(ac97_reg_base + GCR) | (GCR_WARM_RST), ac97_reg_base + GCR);
+}
+
+static inline void pxa_ac97_cold_pxa3xx(void)
+{
+	/* Hold CLKBPB for 100us */
+	writel(0, ac97_reg_base + GCR);
+	writel(GCR_CLKBPB, ac97_reg_base + GCR);
+	udelay(100);
+	writel(0, ac97_reg_base + GCR);
+
+	writel(readl(ac97_reg_base + GCR) & ( GCR_COLD_RST), ac97_reg_base + GCR);  /* clear everything but nCRST */
+	writel(readl(ac97_reg_base + GCR) & (~GCR_COLD_RST), ac97_reg_base + GCR);  /* then assert nCRST */
+
+	gsr_bits = 0;
+
+	/* Can't use interrupts on PXA3xx */
+	writel(readl(ac97_reg_base + GCR) & (~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN)), ac97_reg_base + GCR);
+
+	writel(GCR_WARM_RST | GCR_COLD_RST, ac97_reg_base + GCR);
+}
+#endif
+
+bool pxa2xx_ac97_try_warm_reset(void)
+{
+	unsigned long gsr;
+	unsigned int timeout = 100;
+
+#ifdef CONFIG_PXA25x
+	if (cpu_is_pxa25x())
+		pxa_ac97_warm_pxa25x();
+	else
+#endif
+#ifdef CONFIG_PXA27x
+	if (cpu_is_pxa27x())
+		pxa_ac97_warm_pxa27x();
+	else
+#endif
+#ifdef CONFIG_PXA3xx
+	if (cpu_is_pxa3xx())
+		pxa_ac97_warm_pxa3xx();
+	else
+#endif
+		snd_BUG();
+
+	while (!((readl(ac97_reg_base + GSR) | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
+		mdelay(1);
+
+	gsr = readl(ac97_reg_base + GSR) | gsr_bits;
+	if (!(gsr & (GSR_PCR | GSR_SCR))) {
+		printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
+				 __func__, gsr);
+
+		return false;
+	}
+
+	return true;
+}
+
+bool pxa2xx_ac97_try_cold_reset(void)
+{
+	unsigned long gsr;
+	unsigned int timeout = 1000;
+
+#ifdef CONFIG_PXA25x
+	if (cpu_is_pxa25x())
+		pxa_ac97_cold_pxa25x();
+	else
+#endif
+#ifdef CONFIG_PXA27x
+	if (cpu_is_pxa27x())
+		pxa_ac97_cold_pxa27x();
+	else
+#endif
+#ifdef CONFIG_PXA3xx
+	if (cpu_is_pxa3xx())
+		pxa_ac97_cold_pxa3xx();
+	else
+#endif
+		snd_BUG();
+
+	while (!((readl(ac97_reg_base + GSR) | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
+		mdelay(1);
+
+	gsr = readl(ac97_reg_base + GSR) | gsr_bits;
+	if (!(gsr & (GSR_PCR | GSR_SCR))) {
+		printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
+				 __func__, gsr);
+
+		return false;
+	}
+
+	return true;
+}
+
+
+void pxa2xx_ac97_finish_reset(void)
+{
+	u32 gcr = readl(ac97_reg_base + GCR);
+	gcr &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
+	gcr |= GCR_SDONE_IE|GCR_CDONE_IE;
+	writel(gcr, ac97_reg_base + GCR);
+}
+
+static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
+{
+	long status;
+
+	status = readl(ac97_reg_base + GSR);
+	if (status) {
+		writel(status, ac97_reg_base + GSR);
+		gsr_bits |= status;
+		wake_up(&gsr_wq);
+
+		/* Although we don't use those we still need to clear them
+		   since they tend to spuriously trigger when MMC is used
+		   (hardware bug? go figure)... */
+		if (cpu_is_pxa27x()) {
+			writel(MISR_EOC, ac97_reg_base + MISR);
+			writel(PISR_EOC, ac97_reg_base + PISR);
+			writel(MCSR_EOC, ac97_reg_base + MCSR);
+		}
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+#ifdef CONFIG_PM
+int pxa2xx_ac97_hw_suspend(void)
+{
+	writel(readl(ac97_reg_base + GCR) | (GCR_ACLINK_OFF), ac97_reg_base + GCR);
+	clk_disable_unprepare(ac97_clk);
+	return 0;
+}
+
+int pxa2xx_ac97_hw_resume(void)
+{
+	clk_prepare_enable(ac97_clk);
+	return 0;
+}
+#endif
+
+int pxa2xx_ac97_hw_probe(struct platform_device *dev)
+{
+	int ret;
+	int irq;
+
+	ac97_reg_base = devm_platform_ioremap_resource(dev, 0);
+	if (IS_ERR(ac97_reg_base)) {
+		dev_err(&dev->dev, "Missing MMIO resource\n");
+		return PTR_ERR(ac97_reg_base);
+	}
+
+	if (cpu_is_pxa27x()) {
+		/* Assert reset using GPIOD_OUT_HIGH, because reset is GPIO_ACTIVE_LOW */
+		rst_gpio = devm_gpiod_get_optional(&dev->dev, "reset",
+						   GPIOD_OUT_HIGH);
+		if (IS_ERR(rst_gpio))
+			return dev_err_probe(&dev->dev, PTR_ERR(rst_gpio),
+					     "reset gpio failed\n");
+
+		/*
+		 * This gpio is needed for a work-around to a bug in the ac97
+		 * controller during warm reset.  The direction and level is set
+		 * here so that it is an output driven high when switching from
+		 * AC97_nRESET alt function to generic gpio.
+		 */
+		gpiod_set_consumer_name(rst_gpio, "pxa27x ac97 reset");
+		pxa27x_configure_ac97reset(rst_gpio, false);
+
+		ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
+		if (IS_ERR(ac97conf_clk)) {
+			ret = PTR_ERR(ac97conf_clk);
+			ac97conf_clk = NULL;
+			goto err_conf;
+		}
+	}
+
+	ac97_clk = clk_get(&dev->dev, "AC97CLK");
+	if (IS_ERR(ac97_clk)) {
+		ret = PTR_ERR(ac97_clk);
+		ac97_clk = NULL;
+		goto err_clk;
+	}
+
+	ret = clk_prepare_enable(ac97_clk);
+	if (ret)
+		goto err_clk2;
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto err_irq;
+	}
+
+	ret = request_irq(irq, pxa2xx_ac97_irq, 0, "AC97", NULL);
+	if (ret < 0)
+		goto err_irq;
+
+	return 0;
+
+err_irq:
+	writel(readl(ac97_reg_base + GCR) | (GCR_ACLINK_OFF), ac97_reg_base + GCR);
+err_clk2:
+	clk_put(ac97_clk);
+	ac97_clk = NULL;
+err_clk:
+	if (ac97conf_clk) {
+		clk_put(ac97conf_clk);
+		ac97conf_clk = NULL;
+	}
+err_conf:
+	return ret;
+}
+
+void pxa2xx_ac97_hw_remove(struct platform_device *dev)
+{
+	writel(readl(ac97_reg_base + GCR) | (GCR_ACLINK_OFF), ac97_reg_base + GCR);
+	free_irq(platform_get_irq(dev, 0), NULL);
+	if (ac97conf_clk) {
+		clk_put(ac97conf_clk);
+		ac97conf_clk = NULL;
+	}
+	clk_disable_unprepare(ac97_clk);
+	clk_put(ac97_clk);
+	ac97_clk = NULL;
+}
+
+u32 pxa2xx_ac97_read_modr(void)
+{
+	if (!ac97_reg_base)
+		return 0;
+
+	return readl(ac97_reg_base + MODR);
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_read_modr);
+
+u32 pxa2xx_ac97_read_misr(void)
+{
+	if (!ac97_reg_base)
+		return 0;
+
+	return readl(ac97_reg_base + MISR);
+}
+EXPORT_SYMBOL_GPL(pxa2xx_ac97_read_misr);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_DESCRIPTION("Intel/Marvell PXA sound library");
+MODULE_LICENSE("GPL");
+

linux-7.2.3/sound/soc/pxa/pxa2xx-ac97-regs.h

@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_REGS_AC97_H
+#define __ASM_ARCH_REGS_AC97_H
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR		(0x0000)  	/* PCM Out Control Register */
+#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define PICR		(0x0004) 	/* PCM In Control Register */
+#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MCCR		(0x0008)  	/* Mic In Control Register */
+#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define GCR		(0x000C) 	 /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
+#endif
+#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
+#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
+#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
+#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
+#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
+
+#define POSR		(0x0010)  	/* PCM Out Status Register */
+#define POSR_FIFOE	(1 << 4)	/* FIFO error */
+#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define PISR		(0x0014)  	/* PCM In Status Register */
+#define PISR_FIFOE	(1 << 4)	/* FIFO error */
+#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MCSR		(0x0018)  	/* Mic In Status Register */
+#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define GSR		(0x001C)  	/* Global Status Register */
+#define GSR_CDONE	(1 << 19)	/* Command Done */
+#define GSR_SDONE	(1 << 18)	/* Status Done */
+#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
+#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
+#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
+#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
+#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
+#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
+#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
+#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
+#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
+#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
+#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
+#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
+#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
+
+#define CAR		(0x0020)  	/* CODEC Access Register */
+#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
+
+#define PCDR		(0x0040)  	/* PCM FIFO Data Register */
+#define MCDR		(0x0060)  	/* Mic-in FIFO Data Register */
+
+#define MOCR		(0x0100)  	/* Modem Out Control Register */
+#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
+#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MICR		(0x0108)  	/* Modem In Control Register */
+#define MICR_FEIE	(1 << 3)	/* FIFO Error */
+#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MOSR		(0x0110)  	/* Modem Out Status Register */
+#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MISR		(0x0118)  	/* Modem In Status Register */
+#define MISR_FIFOE	(1 << 4)	/* FIFO error */
+#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MODR		(0x0140)  	/* Modem FIFO Data Register */
+
+#define PAC_REG_BASE	(0x0200)  	/* Primary Audio Codec */
+#define SAC_REG_BASE	(0x0300)  	/* Secondary Audio Codec */
+#define PMC_REG_BASE	(0x0400)  	/* Primary Modem Codec */
+#define SMC_REG_BASE	(0x0500)  	/* Secondary Modem Codec */
+
+#endif /* __ASM_ARCH_REGS_AC97_H */

linux-7.2.3/sound/soc/pxa/pxa2xx-ac97.c

@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/sound/pxa2xx-ac97.c -- AC97 support for the Intel PXA2xx chip.
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Dec 02, 2004
+ * Copyright:	MontaVista Software Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
+
+#include <sound/ac97/controller.h>
+#include <sound/core.h>
+#include <sound/ac97_codec.h>
+#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
+
+#include <linux/platform_data/asoc-pxa.h>
+
+#include "pxa2xx-lib.h"
+
+#define PCDR	0x0040  /* PCM FIFO Data Register */
+#define MODR	0x0140  /* Modem FIFO Data Register */
+#define MCDR	0x0060  /* Mic-in FIFO Data Register */
+
+static void pxa2xx_ac97_warm_reset(struct ac97_controller *adrv)
+{
+	pxa2xx_ac97_try_warm_reset();
+
+	pxa2xx_ac97_finish_reset();
+}
+
+static void pxa2xx_ac97_cold_reset(struct ac97_controller *adrv)
+{
+	pxa2xx_ac97_try_cold_reset();
+
+	pxa2xx_ac97_finish_reset();
+}
+
+static int pxa2xx_ac97_read_actrl(struct ac97_controller *adrv, int slot,
+				  unsigned short reg)
+{
+	return pxa2xx_ac97_read(slot, reg);
+}
+
+static int pxa2xx_ac97_write_actrl(struct ac97_controller *adrv, int slot,
+				   unsigned short reg, unsigned short val)
+{
+	return pxa2xx_ac97_write(slot, reg, val);
+}
+
+static struct ac97_controller_ops pxa2xx_ac97_ops = {
+	.read	= pxa2xx_ac97_read_actrl,
+	.write	= pxa2xx_ac97_write_actrl,
+	.warm_reset	= pxa2xx_ac97_warm_reset,
+	.reset	= pxa2xx_ac97_cold_reset,
+};
+
+static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_in = {
+	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "pcm_pcm_stereo_in",
+	.maxburst	= 32,
+};
+
+static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_out = {
+	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "pcm_pcm_stereo_out",
+	.maxburst	= 32,
+};
+
+static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_out = {
+	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
+	.chan_name	= "pcm_aux_mono_out",
+	.maxburst	= 16,
+};
+
+static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_in = {
+	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
+	.chan_name	= "pcm_aux_mono_in",
+	.maxburst	= 16,
+};
+
+static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = {
+	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
+	.chan_name	= "pcm_aux_mic_mono",
+	.maxburst	= 16,
+};
+
+static int pxa2xx_ac97_hifi_startup(struct snd_pcm_substream *substream,
+				    struct snd_soc_dai *cpu_dai)
+{
+	struct snd_dmaengine_dai_dma_data *dma_data;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = &pxa2xx_ac97_pcm_stereo_out;
+	else
+		dma_data = &pxa2xx_ac97_pcm_stereo_in;
+
+	snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
+
+	return 0;
+}
+
+static int pxa2xx_ac97_aux_startup(struct snd_pcm_substream *substream,
+				   struct snd_soc_dai *cpu_dai)
+{
+	struct snd_dmaengine_dai_dma_data *dma_data;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = &pxa2xx_ac97_pcm_aux_mono_out;
+	else
+		dma_data = &pxa2xx_ac97_pcm_aux_mono_in;
+
+	snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
+
+	return 0;
+}
+
+static int pxa2xx_ac97_mic_startup(struct snd_pcm_substream *substream,
+				   struct snd_soc_dai *cpu_dai)
+{
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		return -ENODEV;
+	snd_soc_dai_set_dma_data(cpu_dai, substream,
+				 &pxa2xx_ac97_pcm_mic_mono_in);
+
+	return 0;
+}
+
+#define PXA2XX_AC97_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+		SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
+		SNDRV_PCM_RATE_48000)
+
+static const struct snd_soc_dai_ops pxa_ac97_hifi_dai_ops = {
+	.startup	= pxa2xx_ac97_hifi_startup,
+};
+
+static const struct snd_soc_dai_ops pxa_ac97_aux_dai_ops = {
+	.startup	= pxa2xx_ac97_aux_startup,
+};
+
+static const struct snd_soc_dai_ops pxa_ac97_mic_dai_ops = {
+	.startup	= pxa2xx_ac97_mic_startup,
+};
+
+/*
+ * There is only 1 physical AC97 interface for pxa2xx, but it
+ * has extra fifo's that can be used for aux DACs and ADCs.
+ */
+static struct snd_soc_dai_driver pxa_ac97_dai_driver[] = {
+{
+	.name = "pxa2xx-ac97",
+	.playback = {
+		.stream_name = "AC97 Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = PXA2XX_AC97_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.capture = {
+		.stream_name = "AC97 Capture",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = PXA2XX_AC97_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.ops = &pxa_ac97_hifi_dai_ops,
+},
+{
+	.name = "pxa2xx-ac97-aux",
+	.playback = {
+		.stream_name = "AC97 Aux Playback",
+		.channels_min = 1,
+		.channels_max = 1,
+		.rates = PXA2XX_AC97_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.capture = {
+		.stream_name = "AC97 Aux Capture",
+		.channels_min = 1,
+		.channels_max = 1,
+		.rates = PXA2XX_AC97_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.ops = &pxa_ac97_aux_dai_ops,
+},
+{
+	.name = "pxa2xx-ac97-mic",
+	.capture = {
+		.stream_name = "AC97 Mic Capture",
+		.channels_min = 1,
+		.channels_max = 1,
+		.rates = PXA2XX_AC97_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.ops = &pxa_ac97_mic_dai_ops,
+},
+};
+
+static const struct snd_soc_component_driver pxa_ac97_component = {
+	.name		= "pxa-ac97",
+	.pcm_new	= pxa2xx_soc_pcm_new,
+	.open		= pxa2xx_soc_pcm_open,
+	.close		= pxa2xx_soc_pcm_close,
+	.hw_params	= pxa2xx_soc_pcm_hw_params,
+	.prepare	= pxa2xx_soc_pcm_prepare,
+	.trigger	= pxa2xx_soc_pcm_trigger,
+	.pointer	= pxa2xx_soc_pcm_pointer,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id pxa2xx_ac97_dt_ids[] = {
+	{ .compatible = "marvell,pxa250-ac97", },
+	{ .compatible = "marvell,pxa270-ac97", },
+	{ .compatible = "marvell,pxa300-ac97", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pxa2xx_ac97_dt_ids);
+
+#endif
+
+static int pxa2xx_ac97_dev_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct ac97_controller *ctrl;
+	struct resource *regs;
+
+	if (pdev->id != -1) {
+		dev_err(&pdev->dev, "PXA2xx has only one AC97 port.\n");
+		return -ENXIO;
+	}
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+
+	pxa2xx_ac97_pcm_stereo_in.addr = regs->start + PCDR;
+	pxa2xx_ac97_pcm_stereo_out.addr = regs->start + PCDR;
+	pxa2xx_ac97_pcm_aux_mono_out.addr = regs->start + MODR;
+	pxa2xx_ac97_pcm_aux_mono_in.addr = regs->start + MODR;
+	pxa2xx_ac97_pcm_mic_mono_in.addr = regs->start + MCDR;
+
+	ret = pxa2xx_ac97_hw_probe(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "PXA2xx AC97 hw probe error (%d)\n", ret);
+		return ret;
+	}
+
+	ctrl = snd_ac97_controller_register(&pxa2xx_ac97_ops, &pdev->dev,
+					    AC97_SLOTS_AVAILABLE_ALL);
+	if (IS_ERR(ctrl))
+		return PTR_ERR(ctrl);
+
+	platform_set_drvdata(pdev, ctrl);
+	/* Punt most of the init to the SoC probe; we may need the machine
+	 * driver to do interesting things with the clocking to get us up
+	 * and running.
+	 */
+	return devm_snd_soc_register_component(&pdev->dev, &pxa_ac97_component,
+					  pxa_ac97_dai_driver, ARRAY_SIZE(pxa_ac97_dai_driver));
+}
+
+static void pxa2xx_ac97_dev_remove(struct platform_device *pdev)
+{
+	struct ac97_controller *ctrl = platform_get_drvdata(pdev);
+
+	snd_ac97_controller_unregister(ctrl);
+	pxa2xx_ac97_hw_remove(pdev);
+}
+
+static int pxa2xx_ac97_dev_suspend(struct device *dev)
+{
+	return pxa2xx_ac97_hw_suspend();
+}
+
+static int pxa2xx_ac97_dev_resume(struct device *dev)
+{
+	return pxa2xx_ac97_hw_resume();
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(pxa2xx_ac97_pm_ops,
+		pxa2xx_ac97_dev_suspend, pxa2xx_ac97_dev_resume);
+
+static struct platform_driver pxa2xx_ac97_driver = {
+	.probe		= pxa2xx_ac97_dev_probe,
+	.remove		= pxa2xx_ac97_dev_remove,
+	.driver		= {
+		.name	= "pxa2xx-ac97",
+		.pm	= &pxa2xx_ac97_pm_ops,
+		.of_match_table = of_match_ptr(pxa2xx_ac97_dt_ids),
+	},
+};
+
+module_platform_driver(pxa2xx_ac97_driver);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_DESCRIPTION("AC97 driver for the Intel PXA2xx chip");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-ac97");

linux-7.2.3/sound/soc/pxa/pxa2xx-i2s.c

@@ -0,0 +1,412 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * pxa2xx-i2s.c  --  ALSA Soc Audio Layer
+ *
+ * Copyright 2005 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ *         lrg@slimlogic.co.uk
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
+
+#include <linux/platform_data/asoc-pxa.h>
+
+#include "pxa2xx-lib.h"
+#include "pxa2xx-i2s.h"
+
+/*
+ * I2S Controller Register and Bit Definitions
+ */
+#define SACR0		(0x0000)	/* Global Control Register */
+#define SACR1		(0x0004)	/* Serial Audio I 2 S/MSB-Justified Control Register */
+#define SASR0		(0x000C)	/* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+#define SAIMR		(0x0014)	/* Serial Audio Interrupt Mask Register */
+#define SAICR		(0x0018)	/* Serial Audio Interrupt Clear Register */
+#define SADIV		(0x0060)	/* Audio Clock Divider Register. */
+#define SADR		(0x0080)	/* Serial Audio Data Register (TX and RX FIFO access Register). */
+
+#define SACR0_RFTH(x)	((x) << 12)	/* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x)	((x) << 8)	/* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_STRF	(1 << 5)	/* FIFO Select for EFWR Special Function */
+#define SACR0_EFWR	(1 << 4)	/* Enable EFWR Function  */
+#define SACR0_RST	(1 << 3)	/* FIFO, i2s Register Reset */
+#define SACR0_BCKD	(1 << 2)	/* Bit Clock Direction */
+#define SACR0_ENB	(1 << 0)	/* Enable I2S Link */
+#define SACR1_ENLBF	(1 << 5)	/* Enable Loopback */
+#define SACR1_DRPL	(1 << 4)	/* Disable Replaying Function */
+#define SACR1_DREC	(1 << 3)	/* Disable Recording Function */
+#define SACR1_AMSL	(1 << 0)	/* Specify Alternate Mode */
+
+#define SASR0_I2SOFF	(1 << 7)	/* Controller Status */
+#define SASR0_ROR	(1 << 6)	/* Rx FIFO Overrun */
+#define SASR0_TUR	(1 << 5)	/* Tx FIFO Underrun */
+#define SASR0_RFS	(1 << 4)	/* Rx FIFO Service Request */
+#define SASR0_TFS	(1 << 3)	/* Tx FIFO Service Request */
+#define SASR0_BSY	(1 << 2)	/* I2S Busy */
+#define SASR0_RNE	(1 << 1)	/* Rx FIFO Not Empty */
+#define SASR0_TNF	(1 << 0)	/* Tx FIFO Not Empty */
+
+#define SAICR_ROR	(1 << 6)	/* Clear Rx FIFO Overrun Interrupt */
+#define SAICR_TUR	(1 << 5)	/* Clear Tx FIFO Underrun Interrupt */
+
+#define SAIMR_ROR	(1 << 6)	/* Enable Rx FIFO Overrun Condition Interrupt */
+#define SAIMR_TUR	(1 << 5)	/* Enable Tx FIFO Underrun Condition Interrupt */
+#define SAIMR_RFS	(1 << 4)	/* Enable Rx FIFO Service Interrupt */
+#define SAIMR_TFS	(1 << 3)	/* Enable Tx FIFO Service Interrupt */
+
+struct pxa_i2s_port {
+	u32 sadiv;
+	u32 sacr0;
+	u32 sacr1;
+	u32 saimr;
+	int master;
+	u32 fmt;
+};
+static struct pxa_i2s_port pxa_i2s;
+static struct clk *clk_i2s;
+static int clk_ena = 0;
+static void __iomem *i2s_reg_base;
+
+static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_out = {
+	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "tx",
+	.maxburst	= 32,
+};
+
+static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_in = {
+	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "rx",
+	.maxburst	= 32,
+};
+
+static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
+	struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
+
+	if (IS_ERR(clk_i2s))
+		return PTR_ERR(clk_i2s);
+
+	if (!snd_soc_dai_active(cpu_dai))
+		writel(0, i2s_reg_base + SACR0);
+
+	return 0;
+}
+
+/* wait for I2S controller to be ready */
+static int pxa_i2s_wait(void)
+{
+	int i;
+
+	/* flush the Rx FIFO */
+	for (i = 0; i < 16; i++)
+		readl(i2s_reg_base + SADR);
+	return 0;
+}
+
+static int pxa2xx_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+		unsigned int fmt)
+{
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		pxa_i2s.fmt = 0;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		pxa_i2s.fmt = SACR1_AMSL;
+		break;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+	case SND_SOC_DAIFMT_BP_FP:
+		pxa_i2s.master = 1;
+		break;
+	case SND_SOC_DAIFMT_BC_FP:
+		pxa_i2s.master = 0;
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static int pxa2xx_i2s_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	if (clk_id != PXA2XX_I2S_SYSCLK)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *dai)
+{
+	struct snd_dmaengine_dai_dma_data *dma_data;
+
+	if (WARN_ON(IS_ERR(clk_i2s)))
+		return -EINVAL;
+	clk_prepare_enable(clk_i2s);
+	clk_ena = 1;
+	pxa_i2s_wait();
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = &pxa2xx_i2s_pcm_stereo_out;
+	else
+		dma_data = &pxa2xx_i2s_pcm_stereo_in;
+
+	snd_soc_dai_set_dma_data(dai, substream, dma_data);
+
+	/* is port used by another stream */
+	if (!(SACR0 & SACR0_ENB)) {
+		writel(0, i2s_reg_base + SACR0);
+		if (pxa_i2s.master)
+			writel(readl(i2s_reg_base + SACR0) | (SACR0_BCKD), i2s_reg_base + SACR0);
+
+		writel(readl(i2s_reg_base + SACR0) | (SACR0_RFTH(14) | SACR0_TFTH(1)), i2s_reg_base + SACR0);
+		writel(readl(i2s_reg_base + SACR1) | (pxa_i2s.fmt), i2s_reg_base + SACR1);
+	}
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		writel(readl(i2s_reg_base + SAIMR) | (SAIMR_TFS), i2s_reg_base + SAIMR);
+	else
+		writel(readl(i2s_reg_base + SAIMR) | (SAIMR_RFS), i2s_reg_base + SAIMR);
+
+	switch (params_rate(params)) {
+	case 8000:
+		writel(0x48, i2s_reg_base + SADIV);
+		break;
+	case 11025:
+		writel(0x34, i2s_reg_base + SADIV);
+		break;
+	case 16000:
+		writel(0x24, i2s_reg_base + SADIV);
+		break;
+	case 22050:
+		writel(0x1a, i2s_reg_base + SADIV);
+		break;
+	case 44100:
+		writel(0xd, i2s_reg_base + SADIV);
+		break;
+	case 48000:
+		writel(0xc, i2s_reg_base + SADIV);
+		break;
+	case 96000: /* not in manual and possibly slightly inaccurate */
+		writel(0x6, i2s_reg_base + SADIV);
+		break;
+	}
+
+	return 0;
+}
+
+static int pxa2xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+			      struct snd_soc_dai *dai)
+{
+	int ret = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			writel(readl(i2s_reg_base + SACR1) & (~SACR1_DRPL), i2s_reg_base + SACR1);
+		else
+			writel(readl(i2s_reg_base + SACR1) & (~SACR1_DREC), i2s_reg_base + SACR1);
+		writel(readl(i2s_reg_base + SACR0) | (SACR0_ENB), i2s_reg_base + SACR0);
+		break;
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void pxa2xx_i2s_shutdown(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		writel(readl(i2s_reg_base + SACR1) | (SACR1_DRPL), i2s_reg_base + SACR1);
+		writel(readl(i2s_reg_base + SAIMR) & (~SAIMR_TFS), i2s_reg_base + SAIMR);
+	} else {
+		writel(readl(i2s_reg_base + SACR1) | (SACR1_DREC), i2s_reg_base + SACR1);
+		writel(readl(i2s_reg_base + SAIMR) & (~SAIMR_RFS), i2s_reg_base + SAIMR);
+	}
+
+	if ((readl(i2s_reg_base + SACR1) & (SACR1_DREC | SACR1_DRPL)) == (SACR1_DREC | SACR1_DRPL)) {
+		writel(readl(i2s_reg_base + SACR0) & (~SACR0_ENB), i2s_reg_base + SACR0);
+		pxa_i2s_wait();
+		if (clk_ena) {
+			clk_disable_unprepare(clk_i2s);
+			clk_ena = 0;
+		}
+	}
+}
+
+#ifdef CONFIG_PM
+static int pxa2xx_soc_pcm_suspend(struct snd_soc_component *component)
+{
+	/* store registers */
+	pxa_i2s.sacr0 = readl(i2s_reg_base + SACR0);
+	pxa_i2s.sacr1 = readl(i2s_reg_base + SACR1);
+	pxa_i2s.saimr = readl(i2s_reg_base + SAIMR);
+	pxa_i2s.sadiv = readl(i2s_reg_base + SADIV);
+
+	/* deactivate link */
+	writel(readl(i2s_reg_base + SACR0) & (~SACR0_ENB), i2s_reg_base + SACR0);
+	pxa_i2s_wait();
+	return 0;
+}
+
+static int pxa2xx_soc_pcm_resume(struct snd_soc_component *component)
+{
+	pxa_i2s_wait();
+
+	writel(pxa_i2s.sacr0 & ~SACR0_ENB, i2s_reg_base + SACR0);
+	writel(pxa_i2s.sacr1, i2s_reg_base + SACR1);
+	writel(pxa_i2s.saimr, i2s_reg_base + SAIMR);
+	writel(pxa_i2s.sadiv, i2s_reg_base + SADIV);
+
+	writel(pxa_i2s.sacr0, i2s_reg_base + SACR0);
+
+	return 0;
+}
+
+#else
+#define pxa2xx_soc_pcm_suspend	NULL
+#define pxa2xx_soc_pcm_resume	NULL
+#endif
+
+static int pxa2xx_i2s_probe(struct snd_soc_dai *dai)
+{
+	clk_i2s = clk_get(dai->dev, "I2SCLK");
+	if (IS_ERR(clk_i2s))
+		return PTR_ERR(clk_i2s);
+
+	/*
+	 * PXA Developer's Manual:
+	 * If SACR0[ENB] is toggled in the middle of a normal operation,
+	 * the SACR0[RST] bit must also be set and cleared to reset all
+	 * I2S controller registers.
+	 */
+	writel(SACR0_RST, i2s_reg_base + SACR0);
+	writel(0, i2s_reg_base + SACR0);
+	/* Make sure RPL and REC are disabled */
+	writel(SACR1_DRPL | SACR1_DREC, i2s_reg_base + SACR1);
+	/* Along with FIFO servicing */
+	writel(readl(i2s_reg_base + SAIMR) & (~(SAIMR_RFS | SAIMR_TFS)), i2s_reg_base + SAIMR);
+
+	snd_soc_dai_init_dma_data(dai, &pxa2xx_i2s_pcm_stereo_out,
+		&pxa2xx_i2s_pcm_stereo_in);
+
+	return 0;
+}
+
+static int  pxa2xx_i2s_remove(struct snd_soc_dai *dai)
+{
+	clk_put(clk_i2s);
+	clk_i2s = ERR_PTR(-ENOENT);
+	return 0;
+}
+
+#define PXA2XX_I2S_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+		SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
+		SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000)
+
+static const struct snd_soc_dai_ops pxa_i2s_dai_ops = {
+	.probe		= pxa2xx_i2s_probe,
+	.remove		= pxa2xx_i2s_remove,
+	.startup	= pxa2xx_i2s_startup,
+	.shutdown	= pxa2xx_i2s_shutdown,
+	.trigger	= pxa2xx_i2s_trigger,
+	.hw_params	= pxa2xx_i2s_hw_params,
+	.set_fmt	= pxa2xx_i2s_set_dai_fmt,
+	.set_sysclk	= pxa2xx_i2s_set_dai_sysclk,
+};
+
+static struct snd_soc_dai_driver pxa_i2s_dai = {
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = PXA2XX_I2S_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.capture = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = PXA2XX_I2S_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.ops = &pxa_i2s_dai_ops,
+	.symmetric_rate = 1,
+};
+
+static const struct snd_soc_component_driver pxa_i2s_component = {
+	.name			= "pxa-i2s",
+	.pcm_new		= pxa2xx_soc_pcm_new,
+	.open			= pxa2xx_soc_pcm_open,
+	.close			= pxa2xx_soc_pcm_close,
+	.hw_params		= pxa2xx_soc_pcm_hw_params,
+	.prepare		= pxa2xx_soc_pcm_prepare,
+	.trigger		= pxa2xx_soc_pcm_trigger,
+	.pointer		= pxa2xx_soc_pcm_pointer,
+	.suspend		= pxa2xx_soc_pcm_suspend,
+	.resume			= pxa2xx_soc_pcm_resume,
+	.legacy_dai_naming	= 1,
+};
+
+static int pxa2xx_i2s_drv_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	i2s_reg_base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(i2s_reg_base))
+		return PTR_ERR(i2s_reg_base);
+
+	pxa2xx_i2s_pcm_stereo_out.addr = res->start + SADR;
+	pxa2xx_i2s_pcm_stereo_in.addr = res->start + SADR;
+
+	return devm_snd_soc_register_component(&pdev->dev, &pxa_i2s_component,
+					       &pxa_i2s_dai, 1);
+}
+
+static struct platform_driver pxa2xx_i2s_driver = {
+	.probe = pxa2xx_i2s_drv_probe,
+
+	.driver = {
+		.name = "pxa2xx-i2s",
+	},
+};
+
+static int __init pxa2xx_i2s_init(void)
+{
+	clk_i2s = ERR_PTR(-ENOENT);
+	return platform_driver_register(&pxa2xx_i2s_driver);
+}
+
+static void __exit pxa2xx_i2s_exit(void)
+{
+	platform_driver_unregister(&pxa2xx_i2s_driver);
+}
+
+module_init(pxa2xx_i2s_init);
+module_exit(pxa2xx_i2s_exit);
+
+/* Module information */
+MODULE_AUTHOR("Liam Girdwood, lrg@slimlogic.co.uk");
+MODULE_DESCRIPTION("pxa2xx I2S SoC Interface");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-i2s");

linux-7.2.3/sound/soc/pxa/pxa2xx-i2s.h

@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * linux/sound/soc/pxa/pxa2xx-i2s.h
+ */
+
+#ifndef _PXA2XX_I2S_H
+#define _PXA2XX_I2S_H
+
+/* I2S clock */
+#define PXA2XX_I2S_SYSCLK		0
+
+#endif

linux-7.2.3/sound/soc/pxa/pxa2xx-lib.h

@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PXA2XX_LIB_H
+#define __PXA2XX_LIB_H
+
+#include <uapi/sound/asound.h>
+#include <linux/platform_device.h>
+
+/* PCM */
+struct snd_pcm_substream;
+struct snd_pcm_hw_params;
+struct snd_soc_pcm_runtime;
+struct snd_pcm;
+struct snd_soc_component;
+
+int pxa2xx_soc_pcm_new(struct snd_soc_component *component,
+		       struct snd_soc_pcm_runtime *rtd);
+int pxa2xx_soc_pcm_open(struct snd_soc_component *component,
+		        struct snd_pcm_substream *substream);
+int pxa2xx_soc_pcm_close(struct snd_soc_component *component,
+			 struct snd_pcm_substream *substream);
+int pxa2xx_soc_pcm_hw_params(struct snd_soc_component *component,
+			     struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params);
+int pxa2xx_soc_pcm_prepare(struct snd_soc_component *component,
+			   struct snd_pcm_substream *substream);
+int pxa2xx_soc_pcm_trigger(struct snd_soc_component *component,
+			   struct snd_pcm_substream *substream, int cmd);
+snd_pcm_uframes_t pxa2xx_soc_pcm_pointer(struct snd_soc_component *component,
+					 struct snd_pcm_substream *substream);
+
+/* AC97 */
+int pxa2xx_ac97_read(int slot, unsigned short reg);
+int pxa2xx_ac97_write(int slot, unsigned short reg, unsigned short val);
+
+bool pxa2xx_ac97_try_warm_reset(void);
+bool pxa2xx_ac97_try_cold_reset(void);
+void pxa2xx_ac97_finish_reset(void);
+
+int pxa2xx_ac97_hw_suspend(void);
+int pxa2xx_ac97_hw_resume(void);
+
+int pxa2xx_ac97_hw_probe(struct platform_device *dev);
+void pxa2xx_ac97_hw_remove(struct platform_device *dev);
+
+#endif

linux-7.2.3/sound/soc/pxa/pxa2xx-pcm-lib.c

@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/dmaengine_pcm.h>
+
+#include "pxa2xx-lib.h"
+
+static const struct snd_pcm_hardware pxa2xx_pcm_hardware = {
+	.info			= SNDRV_PCM_INFO_MMAP |
+				  SNDRV_PCM_INFO_MMAP_VALID |
+				  SNDRV_PCM_INFO_INTERLEAVED |
+				  SNDRV_PCM_INFO_PAUSE |
+				  SNDRV_PCM_INFO_RESUME,
+	.formats		= SNDRV_PCM_FMTBIT_S16_LE |
+				  SNDRV_PCM_FMTBIT_S24_LE |
+				  SNDRV_PCM_FMTBIT_S32_LE,
+	.period_bytes_min	= 32,
+	.period_bytes_max	= 8192 - 32,
+	.periods_min		= 1,
+	.periods_max		= 256,
+	.buffer_bytes_max	= 128 * 1024,
+	.fifo_size		= 32,
+};
+
+static int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream,
+			        struct snd_pcm_hw_params *params)
+{
+	struct dma_chan *chan = snd_dmaengine_pcm_get_chan(substream);
+	struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
+	struct snd_dmaengine_dai_dma_data *dma_params;
+	struct dma_slave_config config;
+	int ret;
+
+	dma_params = snd_soc_dai_get_dma_data(snd_soc_rtd_to_cpu(rtd, 0), substream);
+	if (!dma_params)
+		return 0;
+
+	ret = snd_hwparams_to_dma_slave_config(substream, params, &config);
+	if (ret)
+		return ret;
+
+	snd_dmaengine_pcm_set_config_from_dai_data(substream,
+			snd_soc_dai_get_dma_data(snd_soc_rtd_to_cpu(rtd, 0), substream),
+			&config);
+
+	ret = dmaengine_slave_config(chan, &config);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int pxa2xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	return snd_dmaengine_pcm_trigger(substream, cmd);
+}
+
+static snd_pcm_uframes_t
+pxa2xx_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	return snd_dmaengine_pcm_pointer(substream);
+}
+
+static int pxa2xx_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
+static int pxa2xx_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_dmaengine_dai_dma_data *dma_params;
+	int ret;
+
+	runtime->hw = pxa2xx_pcm_hardware;
+
+	dma_params = snd_soc_dai_get_dma_data(snd_soc_rtd_to_cpu(rtd, 0), substream);
+	if (!dma_params)
+		return 0;
+
+	/*
+	 * For mysterious reasons (and despite what the manual says)
+	 * playback samples are lost if the DMA count is not a multiple
+	 * of the DMA burst size.  Let's add a rule to enforce that.
+	 */
+	ret = snd_pcm_hw_constraint_step(runtime, 0,
+		SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 32);
+	if (ret)
+		return ret;
+
+	ret = snd_pcm_hw_constraint_step(runtime, 0,
+		SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 32);
+	if (ret)
+		return ret;
+
+	ret = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (ret < 0)
+		return ret;
+
+	return snd_dmaengine_pcm_open(
+		substream, dma_request_slave_channel(snd_soc_rtd_to_cpu(rtd, 0)->dev,
+						     dma_params->chan_name));
+}
+
+static int pxa2xx_pcm_close(struct snd_pcm_substream *substream)
+{
+	return snd_dmaengine_pcm_close_release_chan(substream);
+}
+
+static int pxa2xx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm)
+{
+	size_t size = pxa2xx_pcm_hardware.buffer_bytes_max;
+
+	return snd_pcm_set_fixed_buffer_all(pcm, SNDRV_DMA_TYPE_DEV_WC,
+					    pcm->card->dev, size);
+}
+
+int pxa2xx_soc_pcm_new(struct snd_soc_component *component,
+		       struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_card *card = rtd->card->snd_card;
+	struct snd_pcm *pcm = rtd->pcm;
+	int ret;
+
+	ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	return pxa2xx_pcm_preallocate_dma_buffer(pcm);
+}
+EXPORT_SYMBOL(pxa2xx_soc_pcm_new);
+
+int pxa2xx_soc_pcm_open(struct snd_soc_component *component,
+			struct snd_pcm_substream *substream)
+{
+	return pxa2xx_pcm_open(substream);
+}
+EXPORT_SYMBOL(pxa2xx_soc_pcm_open);
+
+int pxa2xx_soc_pcm_close(struct snd_soc_component *component,
+			 struct snd_pcm_substream *substream)
+{
+	return pxa2xx_pcm_close(substream);
+}
+EXPORT_SYMBOL(pxa2xx_soc_pcm_close);
+
+int pxa2xx_soc_pcm_hw_params(struct snd_soc_component *component,
+			     struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params)
+{
+	return pxa2xx_pcm_hw_params(substream, params);
+}
+EXPORT_SYMBOL(pxa2xx_soc_pcm_hw_params);
+
+int pxa2xx_soc_pcm_prepare(struct snd_soc_component *component,
+			   struct snd_pcm_substream *substream)
+{
+	return pxa2xx_pcm_prepare(substream);
+}
+EXPORT_SYMBOL(pxa2xx_soc_pcm_prepare);
+
+int pxa2xx_soc_pcm_trigger(struct snd_soc_component *component,
+			   struct snd_pcm_substream *substream, int cmd)
+{
+	return pxa2xx_pcm_trigger(substream, cmd);
+}
+EXPORT_SYMBOL(pxa2xx_soc_pcm_trigger);
+
+snd_pcm_uframes_t
+pxa2xx_soc_pcm_pointer(struct snd_soc_component *component,
+		       struct snd_pcm_substream *substream)
+{
+	return pxa2xx_pcm_pointer(substream);
+}
+EXPORT_SYMBOL(pxa2xx_soc_pcm_pointer);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_DESCRIPTION("Intel PXA2xx sound library");
+MODULE_LICENSE("GPL");

linux-7.2.3/sound/soc/pxa/pxa2xx-pcm.c

@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/sound/arm/pxa2xx-pcm.c -- ALSA PCM interface for the Intel PXA2xx chip
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Nov 30, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/dmaengine.h>
+#include <linux/of.h>
+
+#include <sound/core.h>
+#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
+
+#include "pxa2xx-lib.h"
+
+static const struct snd_soc_component_driver pxa2xx_soc_platform = {
+	.pcm_new	= pxa2xx_soc_pcm_new,
+	.open		= pxa2xx_soc_pcm_open,
+	.close		= pxa2xx_soc_pcm_close,
+	.hw_params	= pxa2xx_soc_pcm_hw_params,
+	.prepare	= pxa2xx_soc_pcm_prepare,
+	.trigger	= pxa2xx_soc_pcm_trigger,
+	.pointer	= pxa2xx_soc_pcm_pointer,
+};
+
+static int pxa2xx_soc_platform_probe(struct platform_device *pdev)
+{
+	return devm_snd_soc_register_component(&pdev->dev, &pxa2xx_soc_platform,
+					       NULL, 0);
+}
+
+static struct platform_driver pxa_pcm_driver = {
+	.driver = {
+		.name = "pxa-pcm-audio",
+	},
+
+	.probe = pxa2xx_soc_platform_probe,
+};
+
+module_platform_driver(pxa_pcm_driver);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_DESCRIPTION("Intel PXA2xx PCM DMA module");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa-pcm-audio");

linux-7.2.3/sound/soc/pxa/spitz.c

@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * spitz.c  --  SoC audio for Sharp SL-Cxx00 models Spitz, Borzoi and Akita
+ *
+ * Copyright 2005 Wolfson Microelectronics PLC.
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Authors: Liam Girdwood <lrg@slimlogic.co.uk>
+ *          Richard Purdie <richard@openedhand.com>
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+
+#include <asm/mach-types.h>
+#include "../codecs/wm8750.h"
+#include "pxa2xx-i2s.h"
+
+#define SPITZ_HP        0
+#define SPITZ_MIC       1
+#define SPITZ_LINE      2
+#define SPITZ_HEADSET   3
+#define SPITZ_HP_OFF    4
+#define SPITZ_SPK_ON    0
+#define SPITZ_SPK_OFF   1
+
+ /* audio clock in Hz - rounded from 12.235MHz */
+#define SPITZ_AUDIO_CLOCK 12288000
+
+static int spitz_jack_func;
+static int spitz_spk_func;
+static struct gpio_desc *gpiod_mic, *gpiod_mute_l, *gpiod_mute_r;
+
+static void spitz_ext_control(struct snd_soc_dapm_context *dapm)
+{
+	snd_soc_dapm_mutex_lock(dapm);
+
+	if (spitz_spk_func == SPITZ_SPK_ON)
+		snd_soc_dapm_enable_pin_unlocked(dapm, "Ext Spk");
+	else
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Ext Spk");
+
+	/* set up jack connection */
+	switch (spitz_jack_func) {
+	case SPITZ_HP:
+		/* enable and unmute hp jack, disable mic bias */
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Headset Jack");
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Mic Jack");
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Line Jack");
+		snd_soc_dapm_enable_pin_unlocked(dapm, "Headphone Jack");
+		gpiod_set_value(gpiod_mute_l, 1);
+		gpiod_set_value(gpiod_mute_r, 1);
+		break;
+	case SPITZ_MIC:
+		/* enable mic jack and bias, mute hp */
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Headphone Jack");
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Headset Jack");
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Line Jack");
+		snd_soc_dapm_enable_pin_unlocked(dapm, "Mic Jack");
+		gpiod_set_value(gpiod_mute_l, 0);
+		gpiod_set_value(gpiod_mute_r, 0);
+		break;
+	case SPITZ_LINE:
+		/* enable line jack, disable mic bias and mute hp */
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Headphone Jack");
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Headset Jack");
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Mic Jack");
+		snd_soc_dapm_enable_pin_unlocked(dapm, "Line Jack");
+		gpiod_set_value(gpiod_mute_l, 0);
+		gpiod_set_value(gpiod_mute_r, 0);
+		break;
+	case SPITZ_HEADSET:
+		/* enable and unmute headset jack enable mic bias, mute L hp */
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Headphone Jack");
+		snd_soc_dapm_enable_pin_unlocked(dapm, "Mic Jack");
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Line Jack");
+		snd_soc_dapm_enable_pin_unlocked(dapm, "Headset Jack");
+		gpiod_set_value(gpiod_mute_l, 0);
+		gpiod_set_value(gpiod_mute_r, 1);
+		break;
+	case SPITZ_HP_OFF:
+
+		/* jack removed, everything off */
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Headphone Jack");
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Headset Jack");
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Mic Jack");
+		snd_soc_dapm_disable_pin_unlocked(dapm, "Line Jack");
+		gpiod_set_value(gpiod_mute_l, 0);
+		gpiod_set_value(gpiod_mute_r, 0);
+		break;
+	}
+
+	snd_soc_dapm_sync_unlocked(dapm);
+
+	snd_soc_dapm_mutex_unlock(dapm);
+}
+
+static int spitz_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
+	struct snd_soc_dapm_context *dapm = snd_soc_card_to_dapm(rtd->card);
+
+	/* check the jack status at stream startup */
+	spitz_ext_control(dapm);
+
+	return 0;
+}
+
+static int spitz_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
+	struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
+	unsigned int clk = 0;
+	int ret = 0;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 48000:
+	case 96000:
+		clk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+		clk = 11289600;
+		break;
+	}
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
+		SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set the I2S system clock as input (unused) */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, 0,
+		SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static const struct snd_soc_ops spitz_ops = {
+	.startup = spitz_startup,
+	.hw_params = spitz_hw_params,
+};
+
+static int spitz_get_jack(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.enumerated.item[0] = spitz_jack_func;
+	return 0;
+}
+
+static int spitz_set_jack(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
+	struct snd_soc_dapm_context *dapm = snd_soc_card_to_dapm(card);
+
+	if (spitz_jack_func == ucontrol->value.enumerated.item[0])
+		return 0;
+
+	spitz_jack_func = ucontrol->value.enumerated.item[0];
+	spitz_ext_control(dapm);
+	return 1;
+}
+
+static int spitz_get_spk(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.enumerated.item[0] = spitz_spk_func;
+	return 0;
+}
+
+static int spitz_set_spk(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
+	struct snd_soc_dapm_context *dapm = snd_soc_card_to_dapm(card);
+
+	if (spitz_spk_func == ucontrol->value.enumerated.item[0])
+		return 0;
+
+	spitz_spk_func = ucontrol->value.enumerated.item[0];
+	spitz_ext_control(dapm);
+	return 1;
+}
+
+static int spitz_mic_bias(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *k, int event)
+{
+	gpiod_set_value_cansleep(gpiod_mic, SND_SOC_DAPM_EVENT_ON(event));
+	return 0;
+}
+
+/* spitz machine dapm widgets */
+static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", spitz_mic_bias),
+	SND_SOC_DAPM_SPK("Ext Spk", NULL),
+	SND_SOC_DAPM_LINE("Line Jack", NULL),
+
+	/* headset is a mic and mono headphone */
+	SND_SOC_DAPM_HP("Headset Jack", NULL),
+};
+
+/* Spitz machine audio_map */
+static const struct snd_soc_dapm_route spitz_audio_map[] = {
+
+	/* headphone connected to LOUT1, ROUT1 */
+	{"Headphone Jack", NULL, "LOUT1"},
+	{"Headphone Jack", NULL, "ROUT1"},
+
+	/* headset connected to ROUT1 and LINPUT1 with bias (def below) */
+	{"Headset Jack", NULL, "ROUT1"},
+
+	/* ext speaker connected to LOUT2, ROUT2  */
+	{"Ext Spk", NULL, "ROUT2"},
+	{"Ext Spk", NULL, "LOUT2"},
+
+	/* mic is connected to input 1 - with bias */
+	{"LINPUT1", NULL, "Mic Bias"},
+	{"Mic Bias", NULL, "Mic Jack"},
+
+	/* line is connected to input 1 - no bias */
+	{"LINPUT1", NULL, "Line Jack"},
+};
+
+static const char * const jack_function[] = {"Headphone", "Mic", "Line",
+	"Headset", "Off"};
+static const char * const spk_function[] = {"On", "Off"};
+static const struct soc_enum spitz_enum[] = {
+	SOC_ENUM_SINGLE_EXT(5, jack_function),
+	SOC_ENUM_SINGLE_EXT(2, spk_function),
+};
+
+static const struct snd_kcontrol_new wm8750_spitz_controls[] = {
+	SOC_ENUM_EXT("Jack Function", spitz_enum[0], spitz_get_jack,
+		spitz_set_jack),
+	SOC_ENUM_EXT("Speaker Function", spitz_enum[1], spitz_get_spk,
+		spitz_set_spk),
+};
+
+/* spitz digital audio interface glue - connects codec <--> CPU */
+SND_SOC_DAILINK_DEFS(wm8750,
+	DAILINK_COMP_ARRAY(COMP_CPU("pxa2xx-i2s")),
+	DAILINK_COMP_ARRAY(COMP_CODEC("wm8750.0-001b", "wm8750-hifi")),
+	DAILINK_COMP_ARRAY(COMP_PLATFORM("pxa-pcm-audio")));
+
+static struct snd_soc_dai_link spitz_dai = {
+	.name = "wm8750",
+	.stream_name = "WM8750",
+	.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+		   SND_SOC_DAIFMT_CBC_CFC,
+	.ops = &spitz_ops,
+	SND_SOC_DAILINK_REG(wm8750),
+};
+
+/* spitz audio machine driver */
+static struct snd_soc_card snd_soc_spitz = {
+	.name = "Spitz",
+	.owner = THIS_MODULE,
+	.dai_link = &spitz_dai,
+	.num_links = 1,
+
+	.controls = wm8750_spitz_controls,
+	.num_controls = ARRAY_SIZE(wm8750_spitz_controls),
+	.dapm_widgets = wm8750_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(wm8750_dapm_widgets),
+	.dapm_routes = spitz_audio_map,
+	.num_dapm_routes = ARRAY_SIZE(spitz_audio_map),
+	.fully_routed = true,
+};
+
+static int spitz_probe(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = &snd_soc_spitz;
+	int ret;
+
+	gpiod_mic = devm_gpiod_get(&pdev->dev, "mic", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_mic))
+		return PTR_ERR(gpiod_mic);
+	gpiod_mute_l = devm_gpiod_get(&pdev->dev, "mute-l", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_mute_l))
+		return PTR_ERR(gpiod_mute_l);
+	gpiod_mute_r = devm_gpiod_get(&pdev->dev, "mute-r", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_mute_r))
+		return PTR_ERR(gpiod_mute_r);
+
+	card->dev = &pdev->dev;
+
+	ret = devm_snd_soc_register_card(&pdev->dev, card);
+	if (ret)
+		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+			ret);
+
+	return ret;
+}
+
+static struct platform_driver spitz_driver = {
+	.driver		= {
+		.name	= "spitz-audio",
+		.pm     = &snd_soc_pm_ops,
+	},
+	.probe		= spitz_probe,
+};
+
+module_platform_driver(spitz_driver);
+
+MODULE_AUTHOR("Richard Purdie");
+MODULE_DESCRIPTION("ALSA SoC Spitz");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:spitz-audio");