Resguardo inicial

linux-7.2.3/sound/usb/line6/Kconfig

@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config SND_USB_LINE6
+	tristate
+	select SND_RAWMIDI
+	select SND_PCM
+	select SND_HWDEP
+
+config SND_USB_POD
+	tristate "Line 6 POD USB support"
+	select SND_USB_LINE6
+	help
+	  This is a driver for PODxt and other similar devices,
+	  supporting the following features:
+	    * Reading/writing individual parameters
+	    * Reading/writing complete channel, effects setup, and amp
+	      setup data
+	    * Channel switching
+	    * Virtual MIDI interface
+	    * Tuner access
+	    * Playback/capture/mixer device for any ALSA-compatible PCM
+	      audio application
+	    * Signal routing (record clean/processed guitar signal,
+	      re-amping)
+
+config SND_USB_PODHD
+	tristate "Line 6 POD X3/HD300/400/500 USB support"
+	select SND_USB_LINE6
+	help
+	  This is a driver for POD X3, HD300, 400 and 500 devices.
+
+config SND_USB_TONEPORT
+	tristate "TonePort GX, UX1 and UX2 USB support"
+	select SND_USB_LINE6
+	select NEW_LEDS
+	select LEDS_CLASS
+	help
+	  This is a driver for TonePort GX, UX1 and UX2 devices.
+
+config SND_USB_VARIAX
+	tristate "Variax Workbench USB support"
+	select SND_USB_LINE6
+	help
+	  This is a driver for Variax Workbench device.
+

linux-7.2.3/sound/usb/line6/Makefile

@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+snd-usb-line6-y := 		\
+		capture.o	\
+		driver.o	\
+		midi.o		\
+		midibuf.o	\
+		pcm.o		\
+		playback.o
+
+snd-usb-pod-y := pod.o
+snd-usb-podhd-y := podhd.o
+snd-usb-toneport-y := toneport.o
+snd-usb-variax-y := variax.o
+
+obj-$(CONFIG_SND_USB_LINE6)	+= snd-usb-line6.o
+obj-$(CONFIG_SND_USB_POD)	+= snd-usb-pod.o
+obj-$(CONFIG_SND_USB_PODHD)	+= snd-usb-podhd.o
+obj-$(CONFIG_SND_USB_TONEPORT)	+= snd-usb-toneport.o
+obj-$(CONFIG_SND_USB_VARIAX)	+= snd-usb-variax.o

linux-7.2.3/sound/usb/line6/capture.c

@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ */
+
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "pcm.h"
+
+/*
+	Find a free URB and submit it.
+	must be called in line6pcm->in.lock context
+*/
+static int submit_audio_in_urb(struct snd_line6_pcm *line6pcm)
+{
+	int index;
+	int i, urb_size;
+	int ret;
+	struct urb *urb_in;
+
+	index = find_first_zero_bit(&line6pcm->in.active_urbs,
+				    line6pcm->line6->iso_buffers);
+
+	if (index < 0 || index >= line6pcm->line6->iso_buffers) {
+		dev_err(line6pcm->line6->ifcdev, "no free URB found\n");
+		return -EINVAL;
+	}
+
+	urb_in = line6pcm->in.urbs[index];
+	urb_size = 0;
+
+	for (i = 0; i < LINE6_ISO_PACKETS; ++i) {
+		struct usb_iso_packet_descriptor *fin =
+		    &urb_in->iso_frame_desc[i];
+		fin->offset = urb_size;
+		fin->length = line6pcm->max_packet_size_in;
+		urb_size += line6pcm->max_packet_size_in;
+	}
+
+	urb_in->transfer_buffer =
+	    line6pcm->in.buffer +
+	    index * LINE6_ISO_PACKETS * line6pcm->max_packet_size_in;
+	urb_in->transfer_buffer_length = urb_size;
+	urb_in->context = line6pcm;
+
+	ret = usb_submit_urb(urb_in, GFP_ATOMIC);
+
+	if (ret == 0)
+		set_bit(index, &line6pcm->in.active_urbs);
+	else
+		dev_err(line6pcm->line6->ifcdev,
+			"URB in #%d submission failed (%d)\n", index, ret);
+
+	return 0;
+}
+
+/*
+	Submit all currently available capture URBs.
+	must be called in line6pcm->in.lock context
+*/
+int line6_submit_audio_in_all_urbs(struct snd_line6_pcm *line6pcm)
+{
+	int ret = 0, i;
+
+	for (i = 0; i < line6pcm->line6->iso_buffers; ++i) {
+		ret = submit_audio_in_urb(line6pcm);
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+/*
+	Copy data into ALSA capture buffer.
+*/
+void line6_capture_copy(struct snd_line6_pcm *line6pcm, char *fbuf, int fsize)
+{
+	struct snd_pcm_substream *substream =
+	    get_substream(line6pcm, SNDRV_PCM_STREAM_CAPTURE);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	const int bytes_per_frame =
+		line6pcm->properties->bytes_per_channel *
+		line6pcm->properties->capture_hw.channels_max;
+	int frames = fsize / bytes_per_frame;
+
+	if (runtime == NULL)
+		return;
+
+	if (line6pcm->in.pos_done + frames > runtime->buffer_size) {
+		/*
+		   The transferred area goes over buffer boundary,
+		   copy two separate chunks.
+		 */
+		int len;
+
+		len = runtime->buffer_size - line6pcm->in.pos_done;
+
+		if (len > 0) {
+			memcpy(runtime->dma_area +
+			       line6pcm->in.pos_done * bytes_per_frame, fbuf,
+			       len * bytes_per_frame);
+			memcpy(runtime->dma_area, fbuf + len * bytes_per_frame,
+			       (frames - len) * bytes_per_frame);
+		} else {
+			/* this is somewhat paranoid */
+			dev_err(line6pcm->line6->ifcdev,
+				"driver bug: len = %d\n", len);
+		}
+	} else {
+		/* copy single chunk */
+		memcpy(runtime->dma_area +
+		       line6pcm->in.pos_done * bytes_per_frame, fbuf, fsize);
+	}
+
+	line6pcm->in.pos_done += frames;
+	if (line6pcm->in.pos_done >= runtime->buffer_size)
+		line6pcm->in.pos_done -= runtime->buffer_size;
+}
+
+void line6_capture_check_period(struct snd_line6_pcm *line6pcm, int length)
+{
+	struct snd_pcm_substream *substream =
+	    get_substream(line6pcm, SNDRV_PCM_STREAM_CAPTURE);
+
+	line6pcm->in.bytes += length;
+	if (line6pcm->in.bytes >= line6pcm->in.period) {
+		line6pcm->in.bytes %= line6pcm->in.period;
+		spin_unlock(&line6pcm->in.lock);
+		snd_pcm_period_elapsed(substream);
+		spin_lock(&line6pcm->in.lock);
+	}
+}
+
+/*
+ * Callback for completed capture URB.
+ */
+static void audio_in_callback(struct urb *urb)
+{
+	int i, index, length = 0, shutdown = 0;
+	struct snd_line6_pcm *line6pcm = (struct snd_line6_pcm *)urb->context;
+
+	line6pcm->in.last_frame = urb->start_frame;
+
+	/* find index of URB */
+	for (index = 0; index < line6pcm->line6->iso_buffers; ++index)
+		if (urb == line6pcm->in.urbs[index])
+			break;
+
+	guard(spinlock_irqsave)(&line6pcm->in.lock);
+
+	for (i = 0; i < LINE6_ISO_PACKETS; ++i) {
+		char *fbuf;
+		int fsize;
+		struct usb_iso_packet_descriptor *fin = &urb->iso_frame_desc[i];
+
+		if (fin->status == -EXDEV) {
+			shutdown = 1;
+			break;
+		}
+
+		fbuf = urb->transfer_buffer + fin->offset;
+		fsize = fin->actual_length;
+
+		if (fsize > line6pcm->max_packet_size_in) {
+			dev_err(line6pcm->line6->ifcdev,
+				"driver and/or device bug: packet too large (%d > %d)\n",
+				fsize, line6pcm->max_packet_size_in);
+		}
+
+		length += fsize;
+
+		BUILD_BUG_ON_MSG(LINE6_ISO_PACKETS != 1,
+			"The following code assumes LINE6_ISO_PACKETS == 1");
+		/* TODO:
+		 * Also, if iso_buffers != 2, the prev frame is almost random at
+		 * playback side.
+		 * This needs to be redesigned. It should be "stable", but we may
+		 * experience sync problems on such high-speed configs.
+		 */
+
+		line6pcm->prev_fbuf = fbuf;
+		line6pcm->prev_fsize = fsize /
+			(line6pcm->properties->bytes_per_channel *
+			line6pcm->properties->capture_hw.channels_max);
+
+		if (!test_bit(LINE6_STREAM_IMPULSE, &line6pcm->in.running) &&
+		    test_bit(LINE6_STREAM_PCM, &line6pcm->in.running) &&
+		    fsize > 0)
+			line6_capture_copy(line6pcm, fbuf, fsize);
+	}
+
+	clear_bit(index, &line6pcm->in.active_urbs);
+
+	if (test_and_clear_bit(index, &line6pcm->in.unlink_urbs))
+		shutdown = 1;
+
+	if (!shutdown) {
+		submit_audio_in_urb(line6pcm);
+
+		if (!test_bit(LINE6_STREAM_IMPULSE, &line6pcm->in.running) &&
+		    test_bit(LINE6_STREAM_PCM, &line6pcm->in.running))
+			line6_capture_check_period(line6pcm, length);
+	}
+}
+
+/* open capture callback */
+static int snd_line6_capture_open(struct snd_pcm_substream *substream)
+{
+	int err;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+
+	err = snd_pcm_hw_constraint_ratdens(runtime, 0,
+					    SNDRV_PCM_HW_PARAM_RATE,
+					    &line6pcm->properties->rates);
+	if (err < 0)
+		return err;
+
+	line6_pcm_acquire(line6pcm, LINE6_STREAM_CAPTURE_HELPER, false);
+
+	runtime->hw = line6pcm->properties->capture_hw;
+	return 0;
+}
+
+/* close capture callback */
+static int snd_line6_capture_close(struct snd_pcm_substream *substream)
+{
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+
+	line6_pcm_release(line6pcm, LINE6_STREAM_CAPTURE_HELPER);
+	return 0;
+}
+
+/* capture operators */
+const struct snd_pcm_ops snd_line6_capture_ops = {
+	.open = snd_line6_capture_open,
+	.close = snd_line6_capture_close,
+	.hw_params = snd_line6_hw_params,
+	.hw_free = snd_line6_hw_free,
+	.prepare = snd_line6_prepare,
+	.trigger = snd_line6_trigger,
+	.pointer = snd_line6_pointer,
+};
+
+int line6_create_audio_in_urbs(struct snd_line6_pcm *line6pcm)
+{
+	struct usb_line6 *line6 = line6pcm->line6;
+	int i;
+
+	line6pcm->in.urbs = kzalloc_objs(struct urb *, line6->iso_buffers);
+	if (line6pcm->in.urbs == NULL)
+		return -ENOMEM;
+
+	/* create audio URBs and fill in constant values: */
+	for (i = 0; i < line6->iso_buffers; ++i) {
+		struct urb *urb;
+
+		/* URB for audio in: */
+		urb = line6pcm->in.urbs[i] =
+		    usb_alloc_urb(LINE6_ISO_PACKETS, GFP_KERNEL);
+
+		if (urb == NULL)
+			return -ENOMEM;
+
+		urb->dev = line6->usbdev;
+		urb->pipe =
+		    usb_rcvisocpipe(line6->usbdev,
+				    line6->properties->ep_audio_r &
+				    USB_ENDPOINT_NUMBER_MASK);
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->start_frame = -1;
+		urb->number_of_packets = LINE6_ISO_PACKETS;
+		urb->interval = LINE6_ISO_INTERVAL;
+		urb->error_count = 0;
+		urb->complete = audio_in_callback;
+		if (usb_urb_ep_type_check(urb))
+			return -EINVAL;
+	}
+
+	return 0;
+}

linux-7.2.3/sound/usb/line6/capture.h

@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ */
+
+#ifndef CAPTURE_H
+#define CAPTURE_H
+
+#include <sound/pcm.h>
+
+#include "driver.h"
+#include "pcm.h"
+
+extern const struct snd_pcm_ops snd_line6_capture_ops;
+
+extern void line6_capture_copy(struct snd_line6_pcm *line6pcm, char *fbuf,
+			       int fsize);
+extern void line6_capture_check_period(struct snd_line6_pcm *line6pcm,
+				       int length);
+extern int line6_create_audio_in_urbs(struct snd_line6_pcm *line6pcm);
+extern int line6_submit_audio_in_all_urbs(struct snd_line6_pcm *line6pcm);
+
+#endif

linux-7.2.3/sound/usb/line6/driver.c

@@ -0,0 +1,900 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/hwdep.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "midi.h"
+#include "playback.h"
+
+#define DRIVER_AUTHOR  "Markus Grabner <line6@grabner-graz.at>"
+#define DRIVER_DESC    "Line 6 USB Driver"
+
+/*
+	This is Line 6's MIDI manufacturer ID.
+*/
+const unsigned char line6_midi_id[3] = {
+	0x00, 0x01, 0x0c
+};
+EXPORT_SYMBOL_GPL(line6_midi_id);
+
+/*
+	Code to request version of POD, Variax interface
+	(and maybe other devices).
+*/
+static const char line6_request_version[] = {
+	0xf0, 0x7e, 0x7f, 0x06, 0x01, 0xf7
+};
+
+/*
+	 Class for asynchronous messages.
+*/
+struct message {
+	struct usb_line6 *line6;
+	const char *buffer;
+	int size;
+	int done;
+};
+
+/*
+	Forward declarations.
+*/
+static void line6_data_received(struct urb *urb);
+static int line6_send_raw_message_async_part(struct message *msg,
+					     struct urb *urb);
+
+/*
+	Start to listen on endpoint.
+*/
+static int line6_start_listen(struct usb_line6 *line6)
+{
+	int err;
+
+	if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
+		usb_fill_int_urb(line6->urb_listen, line6->usbdev,
+			usb_rcvintpipe(line6->usbdev, line6->properties->ep_ctrl_r),
+			line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
+			line6_data_received, line6, line6->interval);
+	} else {
+		usb_fill_bulk_urb(line6->urb_listen, line6->usbdev,
+			usb_rcvbulkpipe(line6->usbdev, line6->properties->ep_ctrl_r),
+			line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
+			line6_data_received, line6);
+	}
+
+	/* sanity checks of EP before actually submitting */
+	if (usb_urb_ep_type_check(line6->urb_listen)) {
+		dev_err(line6->ifcdev, "invalid control EP\n");
+		return -EINVAL;
+	}
+
+	line6->urb_listen->actual_length = 0;
+	err = usb_submit_urb(line6->urb_listen, GFP_ATOMIC);
+	return err;
+}
+
+/*
+	Stop listening on endpoint.
+*/
+static void line6_stop_listen(struct usb_line6 *line6)
+{
+	usb_kill_urb(line6->urb_listen);
+}
+
+/*
+	Send raw message in pieces of wMaxPacketSize bytes.
+*/
+int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
+				  int size)
+{
+	int i, done = 0;
+	const struct line6_properties *properties = line6->properties;
+
+	for (i = 0; i < size; i += line6->max_packet_size) {
+		int partial;
+		const char *frag_buf = buffer + i;
+		int frag_size = min(line6->max_packet_size, size - i);
+		int retval;
+
+		if (properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
+			retval = usb_interrupt_msg(line6->usbdev,
+						usb_sndintpipe(line6->usbdev, properties->ep_ctrl_w),
+						(char *)frag_buf, frag_size,
+						&partial, LINE6_TIMEOUT);
+		} else {
+			retval = usb_bulk_msg(line6->usbdev,
+						usb_sndbulkpipe(line6->usbdev, properties->ep_ctrl_w),
+						(char *)frag_buf, frag_size,
+						&partial, LINE6_TIMEOUT);
+		}
+
+		if (retval) {
+			dev_err(line6->ifcdev,
+				"usb_bulk_msg failed (%d)\n", retval);
+			break;
+		}
+
+		done += frag_size;
+	}
+
+	return done;
+}
+EXPORT_SYMBOL_GPL(line6_send_raw_message);
+
+/*
+	Notification of completion of asynchronous request transmission.
+*/
+static void line6_async_request_sent(struct urb *urb)
+{
+	struct message *msg = (struct message *)urb->context;
+
+	if (msg->done >= msg->size) {
+		usb_free_urb(urb);
+		kfree(msg);
+	} else
+		line6_send_raw_message_async_part(msg, urb);
+}
+
+/*
+	Asynchronously send part of a raw message.
+*/
+static int line6_send_raw_message_async_part(struct message *msg,
+					     struct urb *urb)
+{
+	int retval;
+	struct usb_line6 *line6 = msg->line6;
+	int done = msg->done;
+	int bytes = min(msg->size - done, line6->max_packet_size);
+
+	if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
+		usb_fill_int_urb(urb, line6->usbdev,
+			usb_sndintpipe(line6->usbdev, line6->properties->ep_ctrl_w),
+			(char *)msg->buffer + done, bytes,
+			line6_async_request_sent, msg, line6->interval);
+	} else {
+		usb_fill_bulk_urb(urb, line6->usbdev,
+			usb_sndbulkpipe(line6->usbdev, line6->properties->ep_ctrl_w),
+			(char *)msg->buffer + done, bytes,
+			line6_async_request_sent, msg);
+	}
+
+	msg->done += bytes;
+
+	/* sanity checks of EP before actually submitting */
+	retval = usb_urb_ep_type_check(urb);
+	if (retval < 0)
+		goto error;
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval < 0)
+		goto error;
+
+	return 0;
+
+ error:
+	dev_err(line6->ifcdev, "%s: usb_submit_urb failed (%d)\n",
+		__func__, retval);
+	usb_free_urb(urb);
+	kfree(msg);
+	return retval;
+}
+
+/*
+	Asynchronously send raw message.
+*/
+int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
+				 int size)
+{
+	struct message *msg;
+	struct urb *urb;
+
+	/* create message: */
+	msg = kzalloc_obj(struct message, GFP_ATOMIC);
+	if (msg == NULL)
+		return -ENOMEM;
+
+	/* create URB: */
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+
+	if (urb == NULL) {
+		kfree(msg);
+		return -ENOMEM;
+	}
+
+	/* set message data: */
+	msg->line6 = line6;
+	msg->buffer = buffer;
+	msg->size = size;
+	msg->done = 0;
+
+	/* start sending: */
+	return line6_send_raw_message_async_part(msg, urb);
+}
+EXPORT_SYMBOL_GPL(line6_send_raw_message_async);
+
+/*
+	Send asynchronous device version request.
+*/
+int line6_version_request_async(struct usb_line6 *line6)
+{
+	char *buffer;
+	int retval;
+
+	buffer = kmemdup(line6_request_version,
+			sizeof(line6_request_version), GFP_ATOMIC);
+	if (buffer == NULL)
+		return -ENOMEM;
+
+	retval = line6_send_raw_message_async(line6, buffer,
+					      sizeof(line6_request_version));
+	kfree(buffer);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(line6_version_request_async);
+
+/*
+	Send sysex message in pieces of wMaxPacketSize bytes.
+*/
+int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer,
+			     int size)
+{
+	return line6_send_raw_message(line6, buffer,
+				      size + SYSEX_EXTRA_SIZE) -
+	    SYSEX_EXTRA_SIZE;
+}
+EXPORT_SYMBOL_GPL(line6_send_sysex_message);
+
+/*
+	Allocate buffer for sysex message and prepare header.
+	@param code sysex message code
+	@param size number of bytes between code and sysex end
+*/
+char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2,
+			       int size)
+{
+	char *buffer = kmalloc(size + SYSEX_EXTRA_SIZE, GFP_ATOMIC);
+
+	if (!buffer)
+		return NULL;
+
+	buffer[0] = LINE6_SYSEX_BEGIN;
+	memcpy(buffer + 1, line6_midi_id, sizeof(line6_midi_id));
+	buffer[sizeof(line6_midi_id) + 1] = code1;
+	buffer[sizeof(line6_midi_id) + 2] = code2;
+	buffer[sizeof(line6_midi_id) + 3 + size] = LINE6_SYSEX_END;
+	return buffer;
+}
+EXPORT_SYMBOL_GPL(line6_alloc_sysex_buffer);
+
+/*
+	Notification of data received from the Line 6 device.
+*/
+static void line6_data_received(struct urb *urb)
+{
+	struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
+	struct midi_buffer *mb = &line6->line6midi->midibuf_in;
+	int done;
+
+	if (urb->status == -ESHUTDOWN)
+		return;
+
+	if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
+		scoped_guard(spinlock_irqsave, &line6->line6midi->lock) {
+			done =
+				line6_midibuf_write(mb, urb->transfer_buffer, urb->actual_length);
+
+			if (done < urb->actual_length) {
+				line6_midibuf_ignore(mb, done);
+				dev_dbg(line6->ifcdev, "%d %d buffer overflow - message skipped\n",
+					done, urb->actual_length);
+			}
+		}
+
+		for (;;) {
+			scoped_guard(spinlock_irqsave, &line6->line6midi->lock) {
+				done =
+					line6_midibuf_read(mb, line6->buffer_message,
+							   LINE6_MIDI_MESSAGE_MAXLEN,
+							   LINE6_MIDIBUF_READ_RX);
+			}
+
+			if (done <= 0)
+				break;
+
+			line6->message_length = done;
+			line6_midi_receive(line6, line6->buffer_message, done);
+
+			if (line6->process_message)
+				line6->process_message(line6);
+		}
+	} else {
+		line6->buffer_message = urb->transfer_buffer;
+		line6->message_length = urb->actual_length;
+		if (line6->process_message)
+			line6->process_message(line6);
+		line6->buffer_message = NULL;
+	}
+
+	line6_start_listen(line6);
+}
+
+#define LINE6_READ_WRITE_STATUS_DELAY 2  /* milliseconds */
+#define LINE6_READ_WRITE_MAX_RETRIES 50
+
+/*
+	Read data from device.
+*/
+int line6_read_data(struct usb_line6 *line6, unsigned address, void *data,
+		    unsigned datalen)
+{
+	struct usb_device *usbdev = line6->usbdev;
+	int ret;
+	u8 len;
+	unsigned count;
+
+	if (address > 0xffff || datalen > 0xff)
+		return -EINVAL;
+
+	/* query the serial number: */
+	ret = usb_control_msg_send(usbdev, 0, 0x67,
+				   USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+				   (datalen << 8) | 0x21, address, NULL, 0,
+				   LINE6_TIMEOUT, GFP_KERNEL);
+	if (ret) {
+		dev_err(line6->ifcdev, "read request failed (error %d)\n", ret);
+		goto exit;
+	}
+
+	/* Wait for data length. We'll get 0xff until length arrives. */
+	for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) {
+		mdelay(LINE6_READ_WRITE_STATUS_DELAY);
+
+		ret = usb_control_msg_recv(usbdev, 0, 0x67,
+					   USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+					   0x0012, 0x0000, &len, 1,
+					   LINE6_TIMEOUT, GFP_KERNEL);
+		if (ret) {
+			dev_err(line6->ifcdev,
+				"receive length failed (error %d)\n", ret);
+			goto exit;
+		}
+
+		if (len != 0xff)
+			break;
+	}
+
+	ret = -EIO;
+	if (len == 0xff) {
+		dev_err(line6->ifcdev, "read failed after %d retries\n",
+			count);
+		goto exit;
+	} else if (len != datalen) {
+		/* should be equal or something went wrong */
+		dev_err(line6->ifcdev,
+			"length mismatch (expected %d, got %d)\n",
+			(int)datalen, len);
+		goto exit;
+	}
+
+	/* receive the result: */
+	ret = usb_control_msg_recv(usbdev, 0, 0x67,
+				   USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+				   0x0013, 0x0000, data, datalen, LINE6_TIMEOUT,
+				   GFP_KERNEL);
+	if (ret)
+		dev_err(line6->ifcdev, "read failed (error %d)\n", ret);
+
+exit:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(line6_read_data);
+
+/*
+	Write data to device.
+*/
+int line6_write_data(struct usb_line6 *line6, unsigned address, void *data,
+		     unsigned datalen)
+{
+	struct usb_device *usbdev = line6->usbdev;
+	int ret;
+	unsigned char *status;
+	int count;
+
+	if (address > 0xffff || datalen > 0xffff)
+		return -EINVAL;
+
+	status = kmalloc(1, GFP_KERNEL);
+	if (!status)
+		return -ENOMEM;
+
+	ret = usb_control_msg_send(usbdev, 0, 0x67,
+				   USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+				   0x0022, address, data, datalen, LINE6_TIMEOUT,
+				   GFP_KERNEL);
+	if (ret) {
+		dev_err(line6->ifcdev,
+			"write request failed (error %d)\n", ret);
+		goto exit;
+	}
+
+	for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) {
+		mdelay(LINE6_READ_WRITE_STATUS_DELAY);
+
+		ret = usb_control_msg_recv(usbdev, 0, 0x67,
+					   USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+					   0x0012, 0x0000, status, 1, LINE6_TIMEOUT,
+					   GFP_KERNEL);
+		if (ret) {
+			dev_err(line6->ifcdev,
+				"receiving status failed (error %d)\n", ret);
+			goto exit;
+		}
+
+		if (*status != 0xff)
+			break;
+	}
+
+	if (*status == 0xff) {
+		dev_err(line6->ifcdev, "write failed after %d retries\n",
+			count);
+		ret = -EIO;
+	} else if (*status != 0) {
+		dev_err(line6->ifcdev, "write failed (error %d)\n", ret);
+		ret = -EIO;
+	}
+exit:
+	kfree(status);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(line6_write_data);
+
+/*
+	Read Line 6 device serial number.
+	(POD, TonePort, GuitarPort)
+*/
+int line6_read_serial_number(struct usb_line6 *line6, u32 *serial_number)
+{
+	return line6_read_data(line6, 0x80d0, serial_number,
+			       sizeof(*serial_number));
+}
+EXPORT_SYMBOL_GPL(line6_read_serial_number);
+
+/*
+	Card destructor.
+*/
+static void line6_destruct(struct snd_card *card)
+{
+	struct usb_line6 *line6 = card->private_data;
+	struct usb_device *usbdev = line6->usbdev;
+
+	/* Free buffer memory first. We cannot depend on the existence of private
+	 * data from the (podhd) module, it may be gone already during this call
+	 */
+	kfree(line6->buffer_message);
+
+	kfree(line6->buffer_listen);
+
+	/* then free URBs: */
+	usb_free_urb(line6->urb_listen);
+	line6->urb_listen = NULL;
+
+	/* decrement reference counters: */
+	usb_put_dev(usbdev);
+}
+
+static void line6_get_usb_properties(struct usb_line6 *line6)
+{
+	struct usb_device *usbdev = line6->usbdev;
+	const struct line6_properties *properties = line6->properties;
+	int pipe;
+	struct usb_host_endpoint *ep = NULL;
+
+	if (properties->capabilities & LINE6_CAP_CONTROL) {
+		if (properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
+			pipe = usb_rcvintpipe(line6->usbdev,
+				line6->properties->ep_ctrl_r);
+		} else {
+			pipe = usb_rcvbulkpipe(line6->usbdev,
+				line6->properties->ep_ctrl_r);
+		}
+		ep = usbdev->ep_in[usb_pipeendpoint(pipe)];
+	}
+
+	/* Control data transfer properties */
+	if (ep) {
+		line6->interval = ep->desc.bInterval;
+		line6->max_packet_size = le16_to_cpu(ep->desc.wMaxPacketSize);
+	} else {
+		if (properties->capabilities & LINE6_CAP_CONTROL) {
+			dev_err(line6->ifcdev,
+				"endpoint not available, using fallback values");
+		}
+		line6->interval = LINE6_FALLBACK_INTERVAL;
+		line6->max_packet_size = LINE6_FALLBACK_MAXPACKETSIZE;
+	}
+
+	/* Isochronous transfer properties */
+	if (usbdev->speed == USB_SPEED_LOW) {
+		line6->intervals_per_second = USB_LOW_INTERVALS_PER_SECOND;
+		line6->iso_buffers = USB_LOW_ISO_BUFFERS;
+	} else {
+		line6->intervals_per_second = USB_HIGH_INTERVALS_PER_SECOND;
+		line6->iso_buffers = USB_HIGH_ISO_BUFFERS;
+	}
+}
+
+/* Enable buffering of incoming messages, flush the buffer */
+static int line6_hwdep_open(struct snd_hwdep *hw, struct file *file)
+{
+	struct usb_line6 *line6 = hw->private_data;
+
+	/* NOTE: hwdep layer provides atomicity here */
+
+	line6->messages.active = 1;
+	line6->messages.nonblock = file->f_flags & O_NONBLOCK ? 1 : 0;
+
+	return 0;
+}
+
+/* Stop buffering */
+static int line6_hwdep_release(struct snd_hwdep *hw, struct file *file)
+{
+	struct usb_line6 *line6 = hw->private_data;
+
+	line6->messages.active = 0;
+
+	return 0;
+}
+
+/* Read from circular buffer, return to user */
+static long
+line6_hwdep_read(struct snd_hwdep *hwdep, char __user *buf, long count,
+					loff_t *offset)
+{
+	struct usb_line6 *line6 = hwdep->private_data;
+	long rv = 0;
+	unsigned int out_count;
+
+	if (mutex_lock_interruptible(&line6->messages.read_lock))
+		return -ERESTARTSYS;
+
+	while (kfifo_len(&line6->messages.fifo) == 0) {
+		mutex_unlock(&line6->messages.read_lock);
+
+		if (line6->messages.nonblock)
+			return -EAGAIN;
+
+		rv = wait_event_interruptible(
+			line6->messages.wait_queue,
+			kfifo_len(&line6->messages.fifo) != 0);
+		if (rv < 0)
+			return rv;
+
+		if (mutex_lock_interruptible(&line6->messages.read_lock))
+			return -ERESTARTSYS;
+	}
+
+	if (kfifo_peek_len(&line6->messages.fifo) > count) {
+		/* Buffer too small; allow re-read of the current item... */
+		rv = -EINVAL;
+	} else {
+		rv = kfifo_to_user(&line6->messages.fifo, buf, count, &out_count);
+		if (rv == 0)
+			rv = out_count;
+	}
+
+	mutex_unlock(&line6->messages.read_lock);
+	return rv;
+}
+
+/* Write directly (no buffering) to device by user*/
+static long
+line6_hwdep_write(struct snd_hwdep *hwdep, const char __user *data, long count,
+					loff_t *offset)
+{
+	struct usb_line6 *line6 = hwdep->private_data;
+	int rv;
+	char *data_copy;
+
+	if (count > line6->max_packet_size * LINE6_RAW_MESSAGES_MAXCOUNT) {
+		/* This is an arbitrary limit - still better than nothing... */
+		return -EINVAL;
+	}
+
+	data_copy = memdup_user(data, count);
+	if (IS_ERR(data_copy))
+		return PTR_ERR(data_copy);
+
+	rv = line6_send_raw_message(line6, data_copy, count);
+
+	kfree(data_copy);
+	return rv;
+}
+
+static __poll_t
+line6_hwdep_poll(struct snd_hwdep *hwdep, struct file *file, poll_table *wait)
+{
+	struct usb_line6 *line6 = hwdep->private_data;
+
+	poll_wait(file, &line6->messages.wait_queue, wait);
+
+	guard(mutex)(&line6->messages.read_lock);
+	return kfifo_len(&line6->messages.fifo) == 0 ? 0 : EPOLLIN | EPOLLRDNORM;
+}
+
+static const struct snd_hwdep_ops hwdep_ops = {
+	.open    = line6_hwdep_open,
+	.release = line6_hwdep_release,
+	.read    = line6_hwdep_read,
+	.write   = line6_hwdep_write,
+	.poll    = line6_hwdep_poll,
+};
+
+/* Insert into circular buffer */
+static void line6_hwdep_push_message(struct usb_line6 *line6)
+{
+	if (!line6->messages.active)
+		return;
+
+	if (kfifo_avail(&line6->messages.fifo) >= line6->message_length) {
+		/* No race condition here, there's only one writer */
+		kfifo_in(&line6->messages.fifo,
+			line6->buffer_message, line6->message_length);
+	} /* else TODO: signal overflow */
+
+	wake_up_interruptible(&line6->messages.wait_queue);
+}
+
+static int line6_hwdep_init(struct usb_line6 *line6)
+{
+	int err;
+	struct snd_hwdep *hwdep;
+
+	/* TODO: usb_driver_claim_interface(); */
+	line6->process_message = line6_hwdep_push_message;
+	line6->messages.active = 0;
+	init_waitqueue_head(&line6->messages.wait_queue);
+	mutex_init(&line6->messages.read_lock);
+	INIT_KFIFO(line6->messages.fifo);
+
+	err = snd_hwdep_new(line6->card, "config", 0, &hwdep);
+	if (err < 0)
+		goto end;
+	strscpy(hwdep->name, "config");
+	hwdep->iface = SNDRV_HWDEP_IFACE_LINE6;
+	hwdep->ops = hwdep_ops;
+	hwdep->private_data = line6;
+	hwdep->exclusive = true;
+
+end:
+	return err;
+}
+
+static int line6_init_cap_control(struct usb_line6 *line6)
+{
+	int ret;
+
+	/* initialize USB buffers: */
+	line6->buffer_listen = kzalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL);
+	if (!line6->buffer_listen)
+		return -ENOMEM;
+
+	line6->urb_listen = usb_alloc_urb(0, GFP_KERNEL);
+	if (!line6->urb_listen)
+		return -ENOMEM;
+
+	if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
+		line6->buffer_message = kzalloc(LINE6_MIDI_MESSAGE_MAXLEN, GFP_KERNEL);
+		if (!line6->buffer_message)
+			return -ENOMEM;
+
+		ret = line6_init_midi(line6);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = line6_hwdep_init(line6);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = line6_start_listen(line6);
+	if (ret < 0) {
+		dev_err(line6->ifcdev, "cannot start listening: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void line6_startup_work(struct work_struct *work)
+{
+	struct usb_line6 *line6 =
+		container_of(work, struct usb_line6, startup_work.work);
+
+	if (line6->startup)
+		line6->startup(line6);
+}
+
+/*
+	Probe USB device.
+*/
+int line6_probe(struct usb_interface *interface,
+		const struct usb_device_id *id,
+		const char *driver_name,
+		const struct line6_properties *properties,
+		int (*private_init)(struct usb_line6 *, const struct usb_device_id *id),
+		size_t data_size)
+{
+	struct usb_device *usbdev = interface_to_usbdev(interface);
+	struct snd_card *card;
+	struct usb_line6 *line6;
+	int interface_number;
+	int ret;
+
+	if (WARN_ON(data_size < sizeof(*line6)))
+		return -EINVAL;
+
+	/* we don't handle multiple configurations */
+	if (usbdev->descriptor.bNumConfigurations != 1)
+		return -ENODEV;
+
+	ret = snd_card_new(&interface->dev,
+			   SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
+			   THIS_MODULE, data_size, &card);
+	if (ret < 0)
+		return ret;
+
+	/* store basic data: */
+	line6 = card->private_data;
+	line6->card = card;
+	line6->properties = properties;
+	line6->usbdev = usbdev;
+	line6->ifcdev = &interface->dev;
+	INIT_DELAYED_WORK(&line6->startup_work, line6_startup_work);
+
+	strscpy(card->id, properties->id);
+	strscpy(card->driver, driver_name);
+	strscpy(card->shortname, properties->name);
+	sprintf(card->longname, "Line 6 %s at USB %s", properties->name,
+		dev_name(line6->ifcdev));
+	card->private_free = line6_destruct;
+
+	usb_set_intfdata(interface, line6);
+
+	/* increment reference counters: */
+	usb_get_dev(usbdev);
+
+	/* initialize device info: */
+	dev_info(&interface->dev, "Line 6 %s found\n", properties->name);
+
+	/* query interface number */
+	interface_number = interface->cur_altsetting->desc.bInterfaceNumber;
+
+	/* TODO reserves the bus bandwidth even without actual transfer */
+	ret = usb_set_interface(usbdev, interface_number,
+				properties->altsetting);
+	if (ret < 0) {
+		dev_err(&interface->dev, "set_interface failed\n");
+		goto error;
+	}
+
+	line6_get_usb_properties(line6);
+
+	if (properties->capabilities & LINE6_CAP_CONTROL) {
+		ret = line6_init_cap_control(line6);
+		if (ret < 0)
+			goto error;
+	}
+
+	/* initialize device data based on device: */
+	ret = private_init(line6, id);
+	if (ret < 0)
+		goto error;
+
+	/* creation of additional special files should go here */
+
+	dev_info(&interface->dev, "Line 6 %s now attached\n",
+		 properties->name);
+
+	return 0;
+
+ error:
+	/* we can call disconnect callback here because no close-sync is
+	 * needed yet at this point
+	 */
+	line6_disconnect(interface);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(line6_probe);
+
+/*
+	Line 6 device disconnected.
+*/
+void line6_disconnect(struct usb_interface *interface)
+{
+	struct usb_line6 *line6 = usb_get_intfdata(interface);
+	struct usb_device *usbdev = interface_to_usbdev(interface);
+
+	if (!line6)
+		return;
+
+	if (WARN_ON(usbdev != line6->usbdev))
+		return;
+
+	cancel_delayed_work_sync(&line6->startup_work);
+
+	if (line6->urb_listen != NULL)
+		line6_stop_listen(line6);
+
+	snd_card_disconnect(line6->card);
+	if (line6->line6pcm)
+		line6_pcm_disconnect(line6->line6pcm);
+	if (line6->disconnect)
+		line6->disconnect(line6);
+
+	dev_info(&interface->dev, "Line 6 %s now disconnected\n",
+		 line6->properties->name);
+
+	/* make sure the device isn't destructed twice: */
+	usb_set_intfdata(interface, NULL);
+
+	snd_card_free_when_closed(line6->card);
+}
+EXPORT_SYMBOL_GPL(line6_disconnect);
+
+#ifdef CONFIG_PM
+
+/*
+	Suspend Line 6 device.
+*/
+int line6_suspend(struct usb_interface *interface, pm_message_t message)
+{
+	struct usb_line6 *line6 = usb_get_intfdata(interface);
+	struct snd_line6_pcm *line6pcm = line6->line6pcm;
+
+	snd_power_change_state(line6->card, SNDRV_CTL_POWER_D3hot);
+
+	if (line6->properties->capabilities & LINE6_CAP_CONTROL)
+		line6_stop_listen(line6);
+
+	if (line6pcm != NULL)
+		line6pcm->flags = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_suspend);
+
+/*
+	Resume Line 6 device.
+*/
+int line6_resume(struct usb_interface *interface)
+{
+	struct usb_line6 *line6 = usb_get_intfdata(interface);
+
+	if (line6->properties->capabilities & LINE6_CAP_CONTROL)
+		line6_start_listen(line6);
+
+	snd_power_change_state(line6->card, SNDRV_CTL_POWER_D0);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_resume);
+
+#endif /* CONFIG_PM */
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+

linux-7.2.3/sound/usb/line6/driver.h

@@ -0,0 +1,214 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ */
+
+#ifndef DRIVER_H
+#define DRIVER_H
+
+#include <linux/usb.h>
+#include <linux/mutex.h>
+#include <linux/kfifo.h>
+#include <sound/core.h>
+
+#include "midi.h"
+
+/* USB 1.1 speed configuration */
+#define USB_LOW_INTERVALS_PER_SECOND 1000
+#define USB_LOW_ISO_BUFFERS 2
+
+/* USB 2.0+ speed configuration */
+#define USB_HIGH_INTERVALS_PER_SECOND 8000
+#define USB_HIGH_ISO_BUFFERS 16
+
+/* Fallback USB interval and max packet size values */
+#define LINE6_FALLBACK_INTERVAL 10
+#define LINE6_FALLBACK_MAXPACKETSIZE 16
+
+#define LINE6_TIMEOUT 1000
+#define LINE6_BUFSIZE_LISTEN 64
+#define LINE6_MIDI_MESSAGE_MAXLEN 256
+
+#define LINE6_RAW_MESSAGES_MAXCOUNT_ORDER 7
+/* 4k packets are common, BUFSIZE * MAXCOUNT should be bigger... */
+#define LINE6_RAW_MESSAGES_MAXCOUNT (1 << LINE6_RAW_MESSAGES_MAXCOUNT_ORDER)
+
+
+#if LINE6_BUFSIZE_LISTEN > 65535
+#error "Use dynamic fifo instead"
+#endif
+
+/*
+	Line 6 MIDI control commands
+*/
+#define LINE6_PARAM_CHANGE   0xb0
+#define LINE6_PROGRAM_CHANGE 0xc0
+#define LINE6_SYSEX_BEGIN    0xf0
+#define LINE6_SYSEX_END      0xf7
+#define LINE6_RESET          0xff
+
+/*
+	MIDI channel for messages initiated by the host
+	(and eventually echoed back by the device)
+*/
+#define LINE6_CHANNEL_HOST   0x00
+
+/*
+	MIDI channel for messages initiated by the device
+*/
+#define LINE6_CHANNEL_DEVICE 0x02
+
+#define LINE6_CHANNEL_UNKNOWN 5	/* don't know yet what this is good for */
+
+#define LINE6_CHANNEL_MASK 0x0f
+
+extern const unsigned char line6_midi_id[3];
+
+#define SYSEX_DATA_OFS (sizeof(line6_midi_id) + 3)
+#define SYSEX_EXTRA_SIZE (sizeof(line6_midi_id) + 4)
+
+/*
+	 Common properties of Line 6 devices.
+*/
+struct line6_properties {
+	/* Card id string (maximum 16 characters).
+	 * This can be used to address the device in ALSA programs as
+	 * "default:CARD=<id>"
+	 */
+	const char *id;
+
+	/* Card short name (maximum 32 characters) */
+	const char *name;
+
+	/* Bit vector defining this device's capabilities in line6usb driver */
+	int capabilities;
+
+	int altsetting;
+
+	unsigned int ctrl_if;
+	unsigned int ep_ctrl_r;
+	unsigned int ep_ctrl_w;
+	unsigned int ep_audio_r;
+	unsigned int ep_audio_w;
+};
+
+/* Capability bits */
+enum {
+	/* device supports settings parameter via USB */
+	LINE6_CAP_CONTROL =	1 << 0,
+	/* device supports PCM input/output via USB */
+	LINE6_CAP_PCM =		1 << 1,
+	/* device supports hardware monitoring */
+	LINE6_CAP_HWMON =	1 << 2,
+	/* device requires output data when input is read */
+	LINE6_CAP_IN_NEEDS_OUT = 1 << 3,
+	/* device uses raw MIDI via USB (data endpoints) */
+	LINE6_CAP_CONTROL_MIDI = 1 << 4,
+	/* device provides low-level information */
+	LINE6_CAP_CONTROL_INFO = 1 << 5,
+	/* device provides hardware monitoring volume control */
+	LINE6_CAP_HWMON_CTL =	1 << 6,
+};
+
+/*
+	 Common data shared by all Line 6 devices.
+	 Corresponds to a pair of USB endpoints.
+*/
+struct usb_line6 {
+	/* USB device */
+	struct usb_device *usbdev;
+
+	/* Properties */
+	const struct line6_properties *properties;
+
+	/* Interval for data USB packets */
+	int interval;
+	/* ...for isochronous transfers framing */
+	int intervals_per_second;
+
+	/* Number of isochronous URBs used for frame transfers */
+	int iso_buffers;
+
+	/* Maximum size of data USB packet */
+	int max_packet_size;
+
+	/* Device representing the USB interface */
+	struct device *ifcdev;
+
+	/* Line 6 sound card data structure.
+	 * Each device has at least MIDI or PCM.
+	 */
+	struct snd_card *card;
+
+	/* Line 6 PCM device data structure */
+	struct snd_line6_pcm *line6pcm;
+
+	/* Line 6 MIDI device data structure */
+	struct snd_line6_midi *line6midi;
+
+	/* URB for listening to POD data endpoint */
+	struct urb *urb_listen;
+
+	/* Buffer for incoming data from POD data endpoint */
+	unsigned char *buffer_listen;
+
+	/* Buffer for message to be processed, generated from MIDI layer */
+	unsigned char *buffer_message;
+
+	/* Length of message to be processed, generated from MIDI layer  */
+	int message_length;
+
+	/* Circular buffer for non-MIDI control messages */
+	struct {
+		struct mutex read_lock;
+		wait_queue_head_t wait_queue;
+		unsigned int active:1;
+		unsigned int nonblock:1;
+		STRUCT_KFIFO_REC_2(LINE6_BUFSIZE_LISTEN * LINE6_RAW_MESSAGES_MAXCOUNT)
+			fifo;
+	} messages;
+
+	/* Work for delayed PCM startup */
+	struct delayed_work startup_work;
+
+	/* If MIDI is supported, buffer_message contains the pre-processed data;
+	 * otherwise the data is only in urb_listen (buffer_incoming).
+	 */
+	void (*process_message)(struct usb_line6 *);
+	void (*disconnect)(struct usb_line6 *line6);
+	void (*startup)(struct usb_line6 *line6);
+};
+
+extern char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1,
+				      int code2, int size);
+extern int line6_read_data(struct usb_line6 *line6, unsigned address,
+			   void *data, unsigned datalen);
+extern int line6_read_serial_number(struct usb_line6 *line6,
+				    u32 *serial_number);
+extern int line6_send_raw_message(struct usb_line6 *line6,
+					const char *buffer, int size);
+extern int line6_send_raw_message_async(struct usb_line6 *line6,
+					const char *buffer, int size);
+extern int line6_send_sysex_message(struct usb_line6 *line6,
+				    const char *buffer, int size);
+extern int line6_version_request_async(struct usb_line6 *line6);
+extern int line6_write_data(struct usb_line6 *line6, unsigned address,
+			    void *data, unsigned datalen);
+
+int line6_probe(struct usb_interface *interface,
+		const struct usb_device_id *id,
+		const char *driver_name,
+		const struct line6_properties *properties,
+		int (*private_init)(struct usb_line6 *, const struct usb_device_id *id),
+		size_t data_size);
+
+void line6_disconnect(struct usb_interface *interface);
+
+#ifdef CONFIG_PM
+int line6_suspend(struct usb_interface *interface, pm_message_t message);
+int line6_resume(struct usb_interface *interface);
+#endif
+
+#endif

linux-7.2.3/sound/usb/line6/midi.c

@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ */
+
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/export.h>
+#include <sound/core.h>
+#include <sound/rawmidi.h>
+
+#include "driver.h"
+#include "midi.h"
+
+#define line6_rawmidi_substream_midi(substream) \
+	((struct snd_line6_midi *)((substream)->rmidi->private_data))
+
+static int send_midi_async(struct usb_line6 *line6, unsigned char *data,
+			   int length);
+
+/*
+	Pass data received via USB to MIDI.
+*/
+void line6_midi_receive(struct usb_line6 *line6, unsigned char *data,
+			int length)
+{
+	if (line6->line6midi->substream_receive)
+		snd_rawmidi_receive(line6->line6midi->substream_receive,
+				    data, length);
+}
+
+/*
+	Read data from MIDI buffer and transmit them via USB.
+*/
+static void line6_midi_transmit(struct snd_rawmidi_substream *substream)
+{
+	struct usb_line6 *line6 =
+	    line6_rawmidi_substream_midi(substream)->line6;
+	struct snd_line6_midi *line6midi = line6->line6midi;
+	struct midi_buffer *mb = &line6midi->midibuf_out;
+	unsigned char chunk[LINE6_FALLBACK_MAXPACKETSIZE];
+	int req, done;
+
+	for (;;) {
+		req = min3(line6_midibuf_bytes_free(mb), line6->max_packet_size,
+			   LINE6_FALLBACK_MAXPACKETSIZE);
+		done = snd_rawmidi_transmit_peek(substream, chunk, req);
+
+		if (done == 0)
+			break;
+
+		line6_midibuf_write(mb, chunk, done);
+		snd_rawmidi_transmit_ack(substream, done);
+	}
+
+	for (;;) {
+		done = line6_midibuf_read(mb, chunk,
+					  LINE6_FALLBACK_MAXPACKETSIZE,
+					  LINE6_MIDIBUF_READ_TX);
+
+		if (done == 0)
+			break;
+
+		send_midi_async(line6, chunk, done);
+	}
+}
+
+/*
+	Notification of completion of MIDI transmission.
+*/
+static void midi_sent(struct urb *urb)
+{
+	int status;
+	int num;
+	struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
+
+	status = urb->status;
+	kfree(urb->transfer_buffer);
+	usb_free_urb(urb);
+
+	if (status == -ESHUTDOWN)
+		return;
+
+	guard(spinlock_irqsave)(&line6->line6midi->lock);
+	num = --line6->line6midi->num_active_send_urbs;
+
+	if (num == 0) {
+		line6_midi_transmit(line6->line6midi->substream_transmit);
+		num = line6->line6midi->num_active_send_urbs;
+	}
+
+	if (num == 0)
+		wake_up(&line6->line6midi->send_wait);
+}
+
+/*
+	Send an asynchronous MIDI message.
+	Assumes that line6->line6midi->lock is held
+	(i.e., this function is serialized).
+*/
+static int send_midi_async(struct usb_line6 *line6, unsigned char *data,
+			   int length)
+{
+	struct urb *urb;
+	int retval;
+	unsigned char *transfer_buffer;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+
+	if (urb == NULL)
+		return -ENOMEM;
+
+	transfer_buffer = kmemdup(data, length, GFP_ATOMIC);
+
+	if (transfer_buffer == NULL) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	usb_fill_int_urb(urb, line6->usbdev,
+			 usb_sndintpipe(line6->usbdev,
+					 line6->properties->ep_ctrl_w),
+			 transfer_buffer, length, midi_sent, line6,
+			 line6->interval);
+	urb->actual_length = 0;
+	retval = usb_urb_ep_type_check(urb);
+	if (retval < 0)
+		goto error;
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval < 0)
+		goto error;
+
+	++line6->line6midi->num_active_send_urbs;
+	return 0;
+
+ error:
+	dev_err(line6->ifcdev, "usb_submit_urb failed\n");
+	usb_free_urb(urb);
+	return retval;
+}
+
+static int line6_midi_output_open(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static int line6_midi_output_close(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static void line6_midi_output_trigger(struct snd_rawmidi_substream *substream,
+				      int up)
+{
+	struct usb_line6 *line6 =
+	    line6_rawmidi_substream_midi(substream)->line6;
+
+	line6->line6midi->substream_transmit = substream;
+	guard(spinlock_irqsave)(&line6->line6midi->lock);
+
+	if (line6->line6midi->num_active_send_urbs == 0)
+		line6_midi_transmit(substream);
+}
+
+static void line6_midi_output_drain(struct snd_rawmidi_substream *substream)
+{
+	struct usb_line6 *line6 =
+	    line6_rawmidi_substream_midi(substream)->line6;
+	struct snd_line6_midi *midi = line6->line6midi;
+
+	wait_event_interruptible(midi->send_wait,
+				 midi->num_active_send_urbs == 0);
+}
+
+static int line6_midi_input_open(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static int line6_midi_input_close(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static void line6_midi_input_trigger(struct snd_rawmidi_substream *substream,
+				     int up)
+{
+	struct usb_line6 *line6 =
+	    line6_rawmidi_substream_midi(substream)->line6;
+
+	if (up)
+		line6->line6midi->substream_receive = substream;
+	else
+		line6->line6midi->substream_receive = NULL;
+}
+
+static const struct snd_rawmidi_ops line6_midi_output_ops = {
+	.open = line6_midi_output_open,
+	.close = line6_midi_output_close,
+	.trigger = line6_midi_output_trigger,
+	.drain = line6_midi_output_drain,
+};
+
+static const struct snd_rawmidi_ops line6_midi_input_ops = {
+	.open = line6_midi_input_open,
+	.close = line6_midi_input_close,
+	.trigger = line6_midi_input_trigger,
+};
+
+/* Create a MIDI device */
+static int snd_line6_new_midi(struct usb_line6 *line6,
+			      struct snd_rawmidi **rmidi_ret)
+{
+	struct snd_rawmidi *rmidi;
+	int err;
+
+	err = snd_rawmidi_new(line6->card, "Line 6 MIDI", 0, 1, 1, rmidi_ret);
+	if (err < 0)
+		return err;
+
+	rmidi = *rmidi_ret;
+	strscpy(rmidi->id, line6->properties->id);
+	strscpy(rmidi->name, line6->properties->name);
+
+	rmidi->info_flags =
+	    SNDRV_RAWMIDI_INFO_OUTPUT |
+	    SNDRV_RAWMIDI_INFO_INPUT | SNDRV_RAWMIDI_INFO_DUPLEX;
+
+	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
+			    &line6_midi_output_ops);
+	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
+			    &line6_midi_input_ops);
+	return 0;
+}
+
+/* MIDI device destructor */
+static void snd_line6_midi_free(struct snd_rawmidi *rmidi)
+{
+	struct snd_line6_midi *line6midi = rmidi->private_data;
+
+	line6_midibuf_destroy(&line6midi->midibuf_in);
+	line6_midibuf_destroy(&line6midi->midibuf_out);
+	kfree(line6midi);
+}
+
+/*
+	Initialize the Line 6 MIDI subsystem.
+*/
+int line6_init_midi(struct usb_line6 *line6)
+{
+	int err;
+	struct snd_rawmidi *rmidi;
+	struct snd_line6_midi *line6midi;
+
+	if (!(line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI)) {
+		/* skip MIDI initialization and report success */
+		return 0;
+	}
+
+	err = snd_line6_new_midi(line6, &rmidi);
+	if (err < 0)
+		return err;
+
+	line6midi = kzalloc_obj(struct snd_line6_midi);
+	if (!line6midi)
+		return -ENOMEM;
+
+	rmidi->private_data = line6midi;
+	rmidi->private_free = snd_line6_midi_free;
+
+	init_waitqueue_head(&line6midi->send_wait);
+	spin_lock_init(&line6midi->lock);
+	line6midi->line6 = line6;
+
+	err = line6_midibuf_init(&line6midi->midibuf_in, MIDI_BUFFER_SIZE, 0);
+	if (err < 0)
+		return err;
+
+	err = line6_midibuf_init(&line6midi->midibuf_out, MIDI_BUFFER_SIZE, 1);
+	if (err < 0)
+		return err;
+
+	line6->line6midi = line6midi;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_init_midi);

linux-7.2.3/sound/usb/line6/midi.h

@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ */
+
+#ifndef MIDI_H
+#define MIDI_H
+
+#include <sound/rawmidi.h>
+
+#include "midibuf.h"
+
+#define MIDI_BUFFER_SIZE 1024
+
+struct snd_line6_midi {
+	/* Pointer back to the Line 6 driver data structure */
+	struct usb_line6 *line6;
+
+	/* MIDI substream for receiving (or NULL if not active) */
+	struct snd_rawmidi_substream *substream_receive;
+
+	/* MIDI substream for transmitting (or NULL if not active) */
+	struct snd_rawmidi_substream *substream_transmit;
+
+	/* Number of currently active MIDI send URBs */
+	int num_active_send_urbs;
+
+	/* Spin lock to protect MIDI buffer handling */
+	spinlock_t lock;
+
+	/* Wait queue for MIDI transmission */
+	wait_queue_head_t send_wait;
+
+	/* Buffer for incoming MIDI stream */
+	struct midi_buffer midibuf_in;
+
+	/* Buffer for outgoing MIDI stream */
+	struct midi_buffer midibuf_out;
+};
+
+extern int line6_init_midi(struct usb_line6 *line6);
+extern void line6_midi_receive(struct usb_line6 *line6, unsigned char *data,
+			       int length);
+
+#endif

linux-7.2.3/sound/usb/line6/midibuf.c

@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ */
+
+#include <linux/slab.h>
+
+#include "midibuf.h"
+
+
+static int midibuf_message_length(unsigned char code)
+{
+	int message_length;
+
+	if (code < 0x80)
+		message_length = -1;
+	else if (code < 0xf0) {
+		static const int length[] = { 3, 3, 3, 3, 2, 2, 3 };
+
+		message_length = length[(code >> 4) - 8];
+	} else {
+		static const int length[] = { -1, 2, 2, 2, -1, -1, 1, 1, 1, -1,
+			1, 1, 1, -1, 1, 1
+		};
+		message_length = length[code & 0x0f];
+	}
+
+	return message_length;
+}
+
+static int midibuf_is_empty(struct midi_buffer *this)
+{
+	return (this->pos_read == this->pos_write) && !this->full;
+}
+
+static int midibuf_is_full(struct midi_buffer *this)
+{
+	return this->full;
+}
+
+void line6_midibuf_reset(struct midi_buffer *this)
+{
+	this->pos_read = this->pos_write = this->full = 0;
+	this->command_prev = -1;
+}
+
+int line6_midibuf_init(struct midi_buffer *this, int size, int split)
+{
+	this->buf = kmalloc(size, GFP_KERNEL);
+
+	if (this->buf == NULL)
+		return -ENOMEM;
+
+	this->size = size;
+	this->split = split;
+	line6_midibuf_reset(this);
+	return 0;
+}
+
+int line6_midibuf_bytes_free(struct midi_buffer *this)
+{
+	return
+	    midibuf_is_full(this) ?
+	    0 :
+	    (this->pos_read - this->pos_write + this->size - 1) % this->size +
+	    1;
+}
+
+int line6_midibuf_bytes_used(struct midi_buffer *this)
+{
+	return
+	    midibuf_is_empty(this) ?
+	    0 :
+	    (this->pos_write - this->pos_read + this->size - 1) % this->size +
+	    1;
+}
+
+int line6_midibuf_write(struct midi_buffer *this, unsigned char *data,
+			int length)
+{
+	int bytes_free;
+	int length1, length2;
+	int skip_active_sense = 0;
+
+	if (midibuf_is_full(this) || (length <= 0))
+		return 0;
+
+	/* skip trailing active sense */
+	if (data[length - 1] == 0xfe) {
+		--length;
+		skip_active_sense = 1;
+	}
+
+	bytes_free = line6_midibuf_bytes_free(this);
+
+	if (length > bytes_free)
+		length = bytes_free;
+
+	if (length > 0) {
+		length1 = this->size - this->pos_write;
+
+		if (length < length1) {
+			/* no buffer wraparound */
+			memcpy(this->buf + this->pos_write, data, length);
+			this->pos_write += length;
+		} else {
+			/* buffer wraparound */
+			length2 = length - length1;
+			memcpy(this->buf + this->pos_write, data, length1);
+			memcpy(this->buf, data + length1, length2);
+			this->pos_write = length2;
+		}
+
+		if (this->pos_write == this->pos_read)
+			this->full = 1;
+	}
+
+	return length + skip_active_sense;
+}
+
+int line6_midibuf_read(struct midi_buffer *this, unsigned char *data,
+		       int length, int read_type)
+{
+	int bytes_used;
+	int length1, length2;
+	int command;
+	int midi_length;
+	int repeat = 0;
+	int i;
+
+	/* we need to be able to store at least a 3 byte MIDI message */
+	if (length < 3)
+		return -EINVAL;
+
+	if (midibuf_is_empty(this))
+		return 0;
+
+	bytes_used = line6_midibuf_bytes_used(this);
+
+	if (length > bytes_used)
+		length = bytes_used;
+
+	length1 = this->size - this->pos_read;
+
+	command = this->buf[this->pos_read];
+	/*
+	   PODxt always has status byte lower nibble set to 0010,
+	   when it means to send 0000, so we correct if here so
+	   that control/program changes come on channel 1 and
+	   sysex message status byte is correct
+	 */
+	if (read_type == LINE6_MIDIBUF_READ_RX) {
+		if (command == 0xb2 || command == 0xc2 || command == 0xf2) {
+			unsigned char fixed = command & 0xf0;
+			this->buf[this->pos_read] = fixed;
+			command = fixed;
+		}
+	}
+
+	/* check MIDI command length */
+	if (command & 0x80) {
+		midi_length = midibuf_message_length(command);
+		this->command_prev = command;
+	} else {
+		if (this->command_prev > 0) {
+			int midi_length_prev =
+			    midibuf_message_length(this->command_prev);
+
+			if (midi_length_prev > 1) {
+				midi_length = midi_length_prev - 1;
+				repeat = 1;
+			} else
+				midi_length = -1;
+		} else
+			midi_length = -1;
+	}
+
+	if (midi_length < 0) {
+		/* search for end of message */
+		if (length < length1) {
+			/* no buffer wraparound */
+			for (i = 1; i < length; ++i)
+				if (this->buf[this->pos_read + i] & 0x80)
+					break;
+
+			midi_length = i;
+		} else {
+			/* buffer wraparound */
+			length2 = length - length1;
+
+			for (i = 1; i < length1; ++i)
+				if (this->buf[this->pos_read + i] & 0x80)
+					break;
+
+			if (i < length1)
+				midi_length = i;
+			else {
+				for (i = 0; i < length2; ++i)
+					if (this->buf[i] & 0x80)
+						break;
+
+				midi_length = length1 + i;
+			}
+		}
+
+		if (midi_length == length)
+			midi_length = -1;	/* end of message not found */
+	}
+
+	if (midi_length < 0) {
+		if (!this->split)
+			return 0;	/* command is not yet complete */
+	} else {
+		if (length < midi_length)
+			return 0;	/* command is not yet complete */
+
+		length = midi_length;
+	}
+
+	if (length < length1) {
+		/* no buffer wraparound */
+		memcpy(data + repeat, this->buf + this->pos_read, length);
+		this->pos_read += length;
+	} else {
+		/* buffer wraparound */
+		length2 = length - length1;
+		memcpy(data + repeat, this->buf + this->pos_read, length1);
+		memcpy(data + repeat + length1, this->buf, length2);
+		this->pos_read = length2;
+	}
+
+	if (repeat)
+		data[0] = this->command_prev;
+
+	this->full = 0;
+	return length + repeat;
+}
+
+int line6_midibuf_ignore(struct midi_buffer *this, int length)
+{
+	int bytes_used = line6_midibuf_bytes_used(this);
+
+	if (length > bytes_used)
+		length = bytes_used;
+
+	this->pos_read = (this->pos_read + length) % this->size;
+	this->full = 0;
+	return length;
+}
+
+void line6_midibuf_destroy(struct midi_buffer *this)
+{
+	kfree(this->buf);
+	this->buf = NULL;
+}

linux-7.2.3/sound/usb/line6/midibuf.h

@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ */
+
+#ifndef MIDIBUF_H
+#define MIDIBUF_H
+
+#define LINE6_MIDIBUF_READ_TX 0
+#define LINE6_MIDIBUF_READ_RX 1
+
+struct midi_buffer {
+	unsigned char *buf;
+	int size;
+	int split;
+	int pos_read, pos_write;
+	int full;
+	int command_prev;
+};
+
+extern int line6_midibuf_bytes_used(struct midi_buffer *mb);
+extern int line6_midibuf_bytes_free(struct midi_buffer *mb);
+extern void line6_midibuf_destroy(struct midi_buffer *mb);
+extern int line6_midibuf_ignore(struct midi_buffer *mb, int length);
+extern int line6_midibuf_init(struct midi_buffer *mb, int size, int split);
+extern int line6_midibuf_read(struct midi_buffer *mb, unsigned char *data,
+			      int length, int read_type);
+extern void line6_midibuf_reset(struct midi_buffer *mb);
+extern int line6_midibuf_write(struct midi_buffer *mb, unsigned char *data,
+			       int length);
+
+#endif

linux-7.2.3/sound/usb/line6/pcm.c

@@ -0,0 +1,604 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ */
+
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "playback.h"
+
+/* impulse response volume controls */
+static int snd_line6_impulse_volume_info(struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 255;
+	return 0;
+}
+
+static int snd_line6_impulse_volume_get(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = line6pcm->impulse_volume;
+	return 0;
+}
+
+static int snd_line6_impulse_volume_put(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	int value = ucontrol->value.integer.value[0];
+	int err;
+
+	if (line6pcm->impulse_volume == value)
+		return 0;
+
+	line6pcm->impulse_volume = value;
+	if (value > 0) {
+		err = line6_pcm_acquire(line6pcm, LINE6_STREAM_IMPULSE, true);
+		if (err < 0) {
+			line6pcm->impulse_volume = 0;
+			return err;
+		}
+	} else {
+		line6_pcm_release(line6pcm, LINE6_STREAM_IMPULSE);
+	}
+	return 1;
+}
+
+/* impulse response period controls */
+static int snd_line6_impulse_period_info(struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 2000;
+	return 0;
+}
+
+static int snd_line6_impulse_period_get(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = line6pcm->impulse_period;
+	return 0;
+}
+
+static int snd_line6_impulse_period_put(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	int value = ucontrol->value.integer.value[0];
+
+	if (line6pcm->impulse_period == value)
+		return 0;
+
+	line6pcm->impulse_period = value;
+	return 1;
+}
+
+/*
+	Unlink all currently active URBs.
+*/
+static void line6_unlink_audio_urbs(struct snd_line6_pcm *line6pcm,
+				    struct line6_pcm_stream *pcms)
+{
+	int i;
+
+	for (i = 0; i < line6pcm->line6->iso_buffers; i++) {
+		if (test_bit(i, &pcms->active_urbs)) {
+			if (!test_and_set_bit(i, &pcms->unlink_urbs))
+				usb_unlink_urb(pcms->urbs[i]);
+		}
+	}
+}
+
+/*
+	Wait until unlinking of all currently active URBs has been finished.
+*/
+static void line6_wait_clear_audio_urbs(struct snd_line6_pcm *line6pcm,
+					struct line6_pcm_stream *pcms)
+{
+	int timeout = HZ;
+	int i;
+	int alive;
+
+	do {
+		alive = 0;
+		for (i = 0; i < line6pcm->line6->iso_buffers; i++) {
+			if (test_bit(i, &pcms->active_urbs))
+				alive++;
+		}
+		if (!alive)
+			break;
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(1);
+	} while (--timeout > 0);
+	if (alive)
+		dev_err(line6pcm->line6->ifcdev,
+			"timeout: still %d active urbs..\n", alive);
+}
+
+static inline struct line6_pcm_stream *
+get_stream(struct snd_line6_pcm *line6pcm, int direction)
+{
+	return (direction == SNDRV_PCM_STREAM_PLAYBACK) ?
+		&line6pcm->out : &line6pcm->in;
+}
+
+/* allocate a buffer if not opened yet;
+ * call this in line6pcm.state_mutex
+ */
+static int line6_buffer_acquire(struct snd_line6_pcm *line6pcm,
+				struct line6_pcm_stream *pstr, int direction, int type)
+{
+	const int pkt_size =
+		(direction == SNDRV_PCM_STREAM_PLAYBACK) ?
+			line6pcm->max_packet_size_out :
+			line6pcm->max_packet_size_in;
+
+	/* Invoked multiple times in a row so allocate once only */
+	if (!test_and_set_bit(type, &pstr->opened) && !pstr->buffer) {
+		pstr->buffer =
+			kmalloc(array3_size(line6pcm->line6->iso_buffers,
+					    LINE6_ISO_PACKETS, pkt_size),
+				GFP_KERNEL);
+		if (!pstr->buffer)
+			return -ENOMEM;
+	}
+	return 0;
+}
+
+/* free a buffer if all streams are closed;
+ * call this in line6pcm.state_mutex
+ */
+static void line6_buffer_release(struct snd_line6_pcm *line6pcm,
+				 struct line6_pcm_stream *pstr, int type)
+{
+	clear_bit(type, &pstr->opened);
+	if (!pstr->opened) {
+		line6_wait_clear_audio_urbs(line6pcm, pstr);
+		kfree(pstr->buffer);
+		pstr->buffer = NULL;
+	}
+}
+
+/* start a PCM stream */
+static int line6_stream_start(struct snd_line6_pcm *line6pcm, int direction,
+			      int type)
+{
+	struct line6_pcm_stream *pstr = get_stream(line6pcm, direction);
+	int ret = 0;
+
+	guard(spinlock_irqsave)(&pstr->lock);
+	if (!test_and_set_bit(type, &pstr->running) &&
+	    !(pstr->active_urbs || pstr->unlink_urbs)) {
+		pstr->count = 0;
+		/* Submit all currently available URBs */
+		if (direction == SNDRV_PCM_STREAM_PLAYBACK)
+			ret = line6_submit_audio_out_all_urbs(line6pcm);
+		else
+			ret = line6_submit_audio_in_all_urbs(line6pcm);
+	}
+
+	if (ret < 0)
+		clear_bit(type, &pstr->running);
+	return ret;
+}
+
+/* stop a PCM stream; this doesn't sync with the unlinked URBs */
+static void line6_stream_stop(struct snd_line6_pcm *line6pcm, int direction,
+			  int type)
+{
+	struct line6_pcm_stream *pstr = get_stream(line6pcm, direction);
+
+	scoped_guard(spinlock_irqsave, &pstr->lock) {
+		clear_bit(type, &pstr->running);
+		if (pstr->running)
+			return;
+	}
+
+	line6_unlink_audio_urbs(line6pcm, pstr);
+	if (direction == SNDRV_PCM_STREAM_CAPTURE) {
+		guard(spinlock_irqsave)(&pstr->lock);
+		line6pcm->prev_fbuf = NULL;
+		line6pcm->prev_fsize = 0;
+	}
+}
+
+/* common PCM trigger callback */
+int snd_line6_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+	struct snd_pcm_substream *s;
+	int err;
+
+	clear_bit(LINE6_FLAG_PREPARED, &line6pcm->flags);
+
+	snd_pcm_group_for_each_entry(s, substream) {
+		if (s->pcm->card != substream->pcm->card)
+			continue;
+
+		switch (cmd) {
+		case SNDRV_PCM_TRIGGER_START:
+		case SNDRV_PCM_TRIGGER_RESUME:
+			if (s->stream == SNDRV_PCM_STREAM_CAPTURE &&
+				(line6pcm->line6->properties->capabilities &
+					LINE6_CAP_IN_NEEDS_OUT)) {
+				err = line6_stream_start(line6pcm, SNDRV_PCM_STREAM_PLAYBACK,
+						 LINE6_STREAM_CAPTURE_HELPER);
+				if (err < 0)
+					return err;
+			}
+			err = line6_stream_start(line6pcm, s->stream,
+						 LINE6_STREAM_PCM);
+			if (err < 0)
+				return err;
+			break;
+
+		case SNDRV_PCM_TRIGGER_STOP:
+		case SNDRV_PCM_TRIGGER_SUSPEND:
+			if (s->stream == SNDRV_PCM_STREAM_CAPTURE &&
+				(line6pcm->line6->properties->capabilities &
+					LINE6_CAP_IN_NEEDS_OUT)) {
+				line6_stream_stop(line6pcm, SNDRV_PCM_STREAM_PLAYBACK,
+					  LINE6_STREAM_CAPTURE_HELPER);
+			}
+			line6_stream_stop(line6pcm, s->stream,
+					  LINE6_STREAM_PCM);
+			break;
+
+		case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+			if (s->stream != SNDRV_PCM_STREAM_PLAYBACK)
+				return -EINVAL;
+			set_bit(LINE6_FLAG_PAUSE_PLAYBACK, &line6pcm->flags);
+			break;
+
+		case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+			if (s->stream != SNDRV_PCM_STREAM_PLAYBACK)
+				return -EINVAL;
+			clear_bit(LINE6_FLAG_PAUSE_PLAYBACK, &line6pcm->flags);
+			break;
+
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+/* common PCM pointer callback */
+snd_pcm_uframes_t snd_line6_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+	struct line6_pcm_stream *pstr = get_stream(line6pcm, substream->stream);
+
+	return pstr->pos_done;
+}
+
+/* Stop and release duplex streams */
+static void __line6_pcm_release(struct snd_line6_pcm *line6pcm, int type)
+{
+	struct line6_pcm_stream *pstr;
+	int dir;
+
+	for (dir = 0; dir < 2; dir++)
+		line6_stream_stop(line6pcm, dir, type);
+	for (dir = 0; dir < 2; dir++) {
+		pstr = get_stream(line6pcm, dir);
+		line6_buffer_release(line6pcm, pstr, type);
+	}
+}
+
+/* Stop and release duplex streams */
+void line6_pcm_release(struct snd_line6_pcm *line6pcm, int type)
+{
+	guard(mutex)(&line6pcm->state_mutex);
+	__line6_pcm_release(line6pcm, type);
+}
+EXPORT_SYMBOL_GPL(line6_pcm_release);
+
+/* Acquire and optionally start duplex streams:
+ * type is either LINE6_STREAM_IMPULSE or LINE6_STREAM_MONITOR
+ */
+int line6_pcm_acquire(struct snd_line6_pcm *line6pcm, int type, bool start)
+{
+	struct line6_pcm_stream *pstr;
+	int ret = 0, dir;
+
+	/* TODO: We should assert SNDRV_PCM_STREAM_PLAYBACK/CAPTURE == 0/1 */
+	guard(mutex)(&line6pcm->state_mutex);
+	for (dir = 0; dir < 2; dir++) {
+		pstr = get_stream(line6pcm, dir);
+		ret = line6_buffer_acquire(line6pcm, pstr, dir, type);
+		if (ret < 0)
+			goto error;
+		if (!pstr->running)
+			line6_wait_clear_audio_urbs(line6pcm, pstr);
+	}
+	if (start) {
+		for (dir = 0; dir < 2; dir++) {
+			ret = line6_stream_start(line6pcm, dir, type);
+			if (ret < 0)
+				goto error;
+		}
+	}
+ error:
+	if (ret < 0)
+		__line6_pcm_release(line6pcm, type);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(line6_pcm_acquire);
+
+/* common PCM hw_params callback */
+int snd_line6_hw_params(struct snd_pcm_substream *substream,
+			struct snd_pcm_hw_params *hw_params)
+{
+	int ret;
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+	struct line6_pcm_stream *pstr = get_stream(line6pcm, substream->stream);
+
+	guard(mutex)(&line6pcm->state_mutex);
+	ret = line6_buffer_acquire(line6pcm, pstr, substream->stream,
+	                           LINE6_STREAM_PCM);
+	if (ret < 0)
+		return ret;
+
+	pstr->period = params_period_bytes(hw_params);
+	return 0;
+}
+
+/* common PCM hw_free callback */
+int snd_line6_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+	struct line6_pcm_stream *pstr = get_stream(line6pcm, substream->stream);
+
+	guard(mutex)(&line6pcm->state_mutex);
+	line6_buffer_release(line6pcm, pstr, LINE6_STREAM_PCM);
+	return 0;
+}
+
+
+/* control info callback */
+static int snd_line6_control_playback_info(struct snd_kcontrol *kcontrol,
+					   struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 256;
+	return 0;
+}
+
+/* control get callback */
+static int snd_line6_control_playback_get(struct snd_kcontrol *kcontrol,
+					  struct snd_ctl_elem_value *ucontrol)
+{
+	int i;
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+
+	for (i = 0; i < 2; i++)
+		ucontrol->value.integer.value[i] = line6pcm->volume_playback[i];
+
+	return 0;
+}
+
+/* control put callback */
+static int snd_line6_control_playback_put(struct snd_kcontrol *kcontrol,
+					  struct snd_ctl_elem_value *ucontrol)
+{
+	int i, changed = 0;
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+
+	for (i = 0; i < 2; i++)
+		if (line6pcm->volume_playback[i] !=
+		    ucontrol->value.integer.value[i]) {
+			line6pcm->volume_playback[i] =
+			    ucontrol->value.integer.value[i];
+			changed = 1;
+		}
+
+	return changed;
+}
+
+/* control definition */
+static const struct snd_kcontrol_new line6_controls[] = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "PCM Playback Volume",
+		.info = snd_line6_control_playback_info,
+		.get = snd_line6_control_playback_get,
+		.put = snd_line6_control_playback_put
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Impulse Response Volume",
+		.info = snd_line6_impulse_volume_info,
+		.get = snd_line6_impulse_volume_get,
+		.put = snd_line6_impulse_volume_put
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Impulse Response Period",
+		.info = snd_line6_impulse_period_info,
+		.get = snd_line6_impulse_period_get,
+		.put = snd_line6_impulse_period_put
+	},
+};
+
+/*
+	Cleanup the PCM device.
+*/
+static void cleanup_urbs(struct line6_pcm_stream *pcms, int iso_buffers)
+{
+	int i;
+
+	/* Most likely impossible in current code... */
+	if (pcms->urbs == NULL)
+		return;
+
+	for (i = 0; i < iso_buffers; i++) {
+		if (pcms->urbs[i]) {
+			usb_kill_urb(pcms->urbs[i]);
+			usb_free_urb(pcms->urbs[i]);
+		}
+	}
+	kfree(pcms->urbs);
+	pcms->urbs = NULL;
+}
+
+static void line6_cleanup_pcm(struct snd_pcm *pcm)
+{
+	struct snd_line6_pcm *line6pcm = snd_pcm_chip(pcm);
+
+	cleanup_urbs(&line6pcm->out, line6pcm->line6->iso_buffers);
+	cleanup_urbs(&line6pcm->in, line6pcm->line6->iso_buffers);
+	kfree(line6pcm);
+}
+
+/* create a PCM device */
+static int snd_line6_new_pcm(struct usb_line6 *line6, struct snd_pcm **pcm_ret)
+{
+	struct snd_pcm *pcm;
+	int err;
+
+	err = snd_pcm_new(line6->card, (char *)line6->properties->name,
+			  0, 1, 1, pcm_ret);
+	if (err < 0)
+		return err;
+	pcm = *pcm_ret;
+	strscpy(pcm->name, line6->properties->name);
+
+	/* set operators */
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+			&snd_line6_playback_ops);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_line6_capture_ops);
+
+	/* pre-allocation of buffers */
+	snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
+				       NULL, 64 * 1024, 128 * 1024);
+	return 0;
+}
+
+/*
+	Sync with PCM stream stops.
+*/
+void line6_pcm_disconnect(struct snd_line6_pcm *line6pcm)
+{
+	line6_unlink_audio_urbs(line6pcm, &line6pcm->out);
+	line6_unlink_audio_urbs(line6pcm, &line6pcm->in);
+	line6_wait_clear_audio_urbs(line6pcm, &line6pcm->out);
+	line6_wait_clear_audio_urbs(line6pcm, &line6pcm->in);
+}
+
+/*
+	Create and register the PCM device and mixer entries.
+	Create URBs for playback and capture.
+*/
+int line6_init_pcm(struct usb_line6 *line6,
+		   struct line6_pcm_properties *properties)
+{
+	int i, err;
+	unsigned ep_read = line6->properties->ep_audio_r;
+	unsigned ep_write = line6->properties->ep_audio_w;
+	struct snd_pcm *pcm;
+	struct snd_line6_pcm *line6pcm;
+
+	if (!(line6->properties->capabilities & LINE6_CAP_PCM))
+		return 0;	/* skip PCM initialization and report success */
+
+	err = snd_line6_new_pcm(line6, &pcm);
+	if (err < 0)
+		return err;
+
+	line6pcm = kzalloc_obj(*line6pcm);
+	if (!line6pcm)
+		return -ENOMEM;
+
+	mutex_init(&line6pcm->state_mutex);
+	line6pcm->pcm = pcm;
+	line6pcm->properties = properties;
+	line6pcm->volume_playback[0] = line6pcm->volume_playback[1] = 255;
+	line6pcm->volume_monitor = 255;
+	line6pcm->line6 = line6;
+
+	spin_lock_init(&line6pcm->out.lock);
+	spin_lock_init(&line6pcm->in.lock);
+	line6pcm->impulse_period = LINE6_IMPULSE_DEFAULT_PERIOD;
+
+	line6->line6pcm = line6pcm;
+
+	pcm->private_data = line6pcm;
+	pcm->private_free = line6_cleanup_pcm;
+
+	line6pcm->max_packet_size_in =
+		usb_maxpacket(line6->usbdev,
+			usb_rcvisocpipe(line6->usbdev, ep_read));
+	line6pcm->max_packet_size_out =
+		usb_maxpacket(line6->usbdev,
+			usb_sndisocpipe(line6->usbdev, ep_write));
+	if (!line6pcm->max_packet_size_in || !line6pcm->max_packet_size_out) {
+		dev_err(line6pcm->line6->ifcdev,
+			"cannot get proper max packet size\n");
+		return -EINVAL;
+	}
+
+	err = line6_create_audio_out_urbs(line6pcm);
+	if (err < 0)
+		return err;
+
+	err = line6_create_audio_in_urbs(line6pcm);
+	if (err < 0)
+		return err;
+
+	/* mixer: */
+	for (i = 0; i < ARRAY_SIZE(line6_controls); i++) {
+		err = snd_ctl_add(line6->card,
+				  snd_ctl_new1(&line6_controls[i], line6pcm));
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_init_pcm);
+
+/* prepare pcm callback */
+int snd_line6_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+	struct line6_pcm_stream *pstr = get_stream(line6pcm, substream->stream);
+
+	guard(mutex)(&line6pcm->state_mutex);
+	if (!pstr->running)
+		line6_wait_clear_audio_urbs(line6pcm, pstr);
+
+	if (!test_and_set_bit(LINE6_FLAG_PREPARED, &line6pcm->flags)) {
+		line6pcm->out.count = 0;
+		line6pcm->out.pos = 0;
+		line6pcm->out.pos_done = 0;
+		line6pcm->out.bytes = 0;
+		line6pcm->in.count = 0;
+		line6pcm->in.pos_done = 0;
+		line6pcm->in.bytes = 0;
+	}
+
+	return 0;
+}

linux-7.2.3/sound/usb/line6/pcm.h

@@ -0,0 +1,195 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ */
+
+/*
+	PCM interface to POD series devices.
+*/
+
+#ifndef PCM_H
+#define PCM_H
+
+#include <sound/pcm.h>
+
+#include "driver.h"
+
+/*
+	number of USB frames per URB
+	The Line 6 Windows driver always transmits two frames per packet, but
+	the Linux driver performs significantly better (i.e., lower latency)
+	with only one frame per packet.
+*/
+#define LINE6_ISO_PACKETS	1
+
+/* in a "full speed" device (such as the PODxt Pro) this means 1ms,
+ *  for "high speed" it's 1/8ms
+ */
+#define LINE6_ISO_INTERVAL	1
+
+#define LINE6_IMPULSE_DEFAULT_PERIOD 100
+
+/*
+	Get substream from Line 6 PCM data structure
+*/
+#define get_substream(line6pcm, stream)	\
+		(line6pcm->pcm->streams[stream].substream)
+
+/*
+	PCM mode bits.
+
+	There are several features of the Line 6 USB driver which require PCM
+	data to be exchanged with the device:
+	*) PCM playback and capture via ALSA
+	*) software monitoring (for devices without hardware monitoring)
+	*) optional impulse response measurement
+	However, from the device's point of view, there is just a single
+	capture and playback stream, which must be shared between these
+	subsystems. It is therefore necessary to maintain the state of the
+	subsystems with respect to PCM usage.
+
+	We define two bit flags, "opened" and "running", for each playback
+	or capture stream.  Both can contain the bit flag corresponding to
+	LINE6_STREAM_* type,
+	  LINE6_STREAM_PCM = ALSA PCM playback or capture
+	  LINE6_STREAM_MONITOR = software monitoring
+	  IMPULSE = optional impulse response measurement
+	The opened flag indicates whether the buffer is allocated while
+	the running flag indicates whether the stream is running.
+
+	For monitor or impulse operations, the driver needs to call
+	line6_pcm_acquire() or line6_pcm_release() with the appropriate
+	LINE6_STREAM_* flag.
+*/
+
+/* stream types */
+enum {
+	LINE6_STREAM_PCM,
+	LINE6_STREAM_MONITOR,
+	LINE6_STREAM_IMPULSE,
+	LINE6_STREAM_CAPTURE_HELPER,
+};
+
+/* misc bit flags for PCM operation */
+enum {
+	LINE6_FLAG_PAUSE_PLAYBACK,
+	LINE6_FLAG_PREPARED,
+};
+
+struct line6_pcm_properties {
+	struct snd_pcm_hardware playback_hw, capture_hw;
+	struct snd_pcm_hw_constraint_ratdens rates;
+	int bytes_per_channel;
+};
+
+struct line6_pcm_stream {
+	/* allocated URBs */
+	struct urb **urbs;
+
+	/* Temporary buffer;
+	 * Since the packet size is not known in advance, this buffer is
+	 * large enough to store maximum size packets.
+	 */
+	unsigned char *buffer;
+
+	/* Free frame position in the buffer. */
+	snd_pcm_uframes_t pos;
+
+	/* Count processed bytes;
+	 * This is modulo period size (to determine when a period is finished).
+	 */
+	unsigned bytes;
+
+	/* Counter to create desired sample rate */
+	unsigned count;
+
+	/* period size in bytes */
+	unsigned period;
+
+	/* Processed frame position in the buffer;
+	 * The contents of the ring buffer have been consumed by the USB
+	 * subsystem (i.e., sent to the USB device) up to this position.
+	 */
+	snd_pcm_uframes_t pos_done;
+
+	/* Bit mask of active URBs */
+	unsigned long active_urbs;
+
+	/* Bit mask of URBs currently being unlinked */
+	unsigned long unlink_urbs;
+
+	/* Spin lock to protect updates of the buffer positions (not contents)
+	 */
+	spinlock_t lock;
+
+	/* Bit flags for operational stream types */
+	unsigned long opened;
+
+	/* Bit flags for running stream types */
+	unsigned long running;
+
+	int last_frame;
+};
+
+struct snd_line6_pcm {
+	/* Pointer back to the Line 6 driver data structure */
+	struct usb_line6 *line6;
+
+	/* Properties. */
+	struct line6_pcm_properties *properties;
+
+	/* ALSA pcm stream */
+	struct snd_pcm *pcm;
+
+	/* protection to state changes of in/out streams */
+	struct mutex state_mutex;
+
+	/* Capture and playback streams */
+	struct line6_pcm_stream in;
+	struct line6_pcm_stream out;
+
+	/* Previously captured frame (for software monitoring) */
+	unsigned char *prev_fbuf;
+
+	/* Size of previously captured frame (for software monitoring/sync) */
+	int prev_fsize;
+
+	/* Maximum size of USB packet */
+	int max_packet_size_in;
+	int max_packet_size_out;
+
+	/* PCM playback volume (left and right) */
+	int volume_playback[2];
+
+	/* PCM monitor volume */
+	int volume_monitor;
+
+	/* Volume of impulse response test signal (if zero, test is disabled) */
+	int impulse_volume;
+
+	/* Period of impulse response test signal */
+	int impulse_period;
+
+	/* Counter for impulse response test signal */
+	int impulse_count;
+
+	/* Several status bits (see LINE6_FLAG_*) */
+	unsigned long flags;
+};
+
+extern int line6_init_pcm(struct usb_line6 *line6,
+			  struct line6_pcm_properties *properties);
+extern int snd_line6_trigger(struct snd_pcm_substream *substream, int cmd);
+extern int snd_line6_prepare(struct snd_pcm_substream *substream);
+extern int snd_line6_hw_params(struct snd_pcm_substream *substream,
+			       struct snd_pcm_hw_params *hw_params);
+extern int snd_line6_hw_free(struct snd_pcm_substream *substream);
+extern snd_pcm_uframes_t snd_line6_pointer(struct snd_pcm_substream *substream);
+extern void line6_pcm_disconnect(struct snd_line6_pcm *line6pcm);
+extern int line6_pcm_acquire(struct snd_line6_pcm *line6pcm, int type,
+			       bool start);
+extern void line6_pcm_release(struct snd_line6_pcm *line6pcm, int type);
+
+#endif

linux-7.2.3/sound/usb/line6/playback.c

@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ */
+
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "pcm.h"
+#include "playback.h"
+
+/*
+	Software stereo volume control.
+*/
+static void change_volume(struct urb *urb_out, int volume[],
+			  int bytes_per_frame)
+{
+	int chn = 0;
+
+	if (volume[0] == 256 && volume[1] == 256)
+		return;		/* maximum volume - no change */
+
+	if (bytes_per_frame == 4) {
+		__le16 *p, *buf_end;
+
+		p = (__le16 *)urb_out->transfer_buffer;
+		buf_end = p + urb_out->transfer_buffer_length / sizeof(*p);
+
+		for (; p < buf_end; ++p) {
+			short pv = le16_to_cpu(*p);
+			int val = (pv * volume[chn & 1]) >> 8;
+			pv = clamp(val, -0x8000, 0x7fff);
+			*p = cpu_to_le16(pv);
+			++chn;
+		}
+	} else if (bytes_per_frame == 6) {
+		unsigned char *p, *buf_end;
+
+		p = (unsigned char *)urb_out->transfer_buffer;
+		buf_end = p + urb_out->transfer_buffer_length;
+
+		for (; p < buf_end; p += 3) {
+			int val;
+
+			val = p[0] + (p[1] << 8) + ((signed char)p[2] << 16);
+			val = (val * volume[chn & 1]) >> 8;
+			val = clamp(val, -0x800000, 0x7fffff);
+			p[0] = val;
+			p[1] = val >> 8;
+			p[2] = val >> 16;
+			++chn;
+		}
+	}
+}
+
+/*
+	Create signal for impulse response test.
+*/
+static void create_impulse_test_signal(struct snd_line6_pcm *line6pcm,
+				       struct urb *urb_out, int bytes_per_frame)
+{
+	int frames = urb_out->transfer_buffer_length / bytes_per_frame;
+
+	if (bytes_per_frame == 4) {
+		int i;
+		short *pi = (short *)line6pcm->prev_fbuf;
+		short *po = (short *)urb_out->transfer_buffer;
+
+		for (i = 0; i < frames; ++i) {
+			po[0] = pi[0];
+			po[1] = 0;
+			pi += 2;
+			po += 2;
+		}
+	} else if (bytes_per_frame == 6) {
+		int i, j;
+		unsigned char *pi = line6pcm->prev_fbuf;
+		unsigned char *po = urb_out->transfer_buffer;
+
+		for (i = 0; i < frames; ++i) {
+			for (j = 0; j < bytes_per_frame / 2; ++j)
+				po[j] = pi[j];
+
+			for (; j < bytes_per_frame; ++j)
+				po[j] = 0;
+
+			pi += bytes_per_frame;
+			po += bytes_per_frame;
+		}
+	}
+	if (--line6pcm->impulse_count <= 0) {
+		((unsigned char *)(urb_out->transfer_buffer))[bytes_per_frame -
+							      1] =
+		    line6pcm->impulse_volume;
+		line6pcm->impulse_count = line6pcm->impulse_period;
+	}
+}
+
+/*
+	Add signal to buffer for software monitoring.
+*/
+static void add_monitor_signal(struct urb *urb_out, unsigned char *signal,
+			       int volume, int bytes_per_frame)
+{
+	if (volume == 0)
+		return;		/* zero volume - no change */
+
+	if (bytes_per_frame == 4) {
+		__le16 *pi, *po, *buf_end;
+
+		pi = (__le16 *)signal;
+		po = (__le16 *)urb_out->transfer_buffer;
+		buf_end = po + urb_out->transfer_buffer_length / sizeof(*po);
+
+		for (; po < buf_end; ++pi, ++po) {
+			short pov = le16_to_cpu(*po);
+			short piv = le16_to_cpu(*pi);
+			int val = pov + ((piv * volume) >> 8);
+			pov = clamp(val, -0x8000, 0x7fff);
+			*po = cpu_to_le16(pov);
+		}
+	}
+
+	/*
+	   We don't need to handle devices with 6 bytes per frame here
+	   since they all support hardware monitoring.
+	 */
+}
+
+/*
+	Find a free URB, prepare audio data, and submit URB.
+	must be called in line6pcm->out.lock context
+*/
+static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
+{
+	int index;
+	int i, urb_size, urb_frames;
+	int ret;
+	const int bytes_per_frame =
+		line6pcm->properties->bytes_per_channel *
+		line6pcm->properties->playback_hw.channels_max;
+	const int frame_increment =
+		line6pcm->properties->rates.rats[0].num_min;
+	const int frame_factor =
+		line6pcm->properties->rates.rats[0].den *
+		(line6pcm->line6->intervals_per_second / LINE6_ISO_INTERVAL);
+	struct urb *urb_out;
+
+	index = find_first_zero_bit(&line6pcm->out.active_urbs,
+				    line6pcm->line6->iso_buffers);
+
+	if (index < 0 || index >= line6pcm->line6->iso_buffers) {
+		dev_err(line6pcm->line6->ifcdev, "no free URB found\n");
+		return -EINVAL;
+	}
+
+	urb_out = line6pcm->out.urbs[index];
+	urb_size = 0;
+
+	/* TODO: this may not work for LINE6_ISO_PACKETS != 1 */
+	for (i = 0; i < LINE6_ISO_PACKETS; ++i) {
+		/* compute frame size for given sampling rate */
+		int fsize = 0;
+		struct usb_iso_packet_descriptor *fout =
+		    &urb_out->iso_frame_desc[i];
+
+		fsize = line6pcm->prev_fsize;
+		if (fsize == 0) {
+			int n;
+
+			line6pcm->out.count += frame_increment;
+			n = line6pcm->out.count / frame_factor;
+			line6pcm->out.count -= n * frame_factor;
+			fsize = n;
+		}
+
+		fsize *= bytes_per_frame;
+
+		fout->offset = urb_size;
+		fout->length = fsize;
+		urb_size += fsize;
+	}
+
+	if (urb_size == 0) {
+		/* can't determine URB size */
+		dev_err(line6pcm->line6->ifcdev, "driver bug: urb_size = 0\n");
+		return -EINVAL;
+	}
+
+	urb_frames = urb_size / bytes_per_frame;
+	urb_out->transfer_buffer =
+	    line6pcm->out.buffer +
+	    index * LINE6_ISO_PACKETS * line6pcm->max_packet_size_out;
+	urb_out->transfer_buffer_length = urb_size;
+	urb_out->context = line6pcm;
+
+	if (test_bit(LINE6_STREAM_PCM, &line6pcm->out.running) &&
+	    !test_bit(LINE6_FLAG_PAUSE_PLAYBACK, &line6pcm->flags)) {
+		struct snd_pcm_runtime *runtime =
+		    get_substream(line6pcm, SNDRV_PCM_STREAM_PLAYBACK)->runtime;
+
+		if (line6pcm->out.pos + urb_frames > runtime->buffer_size) {
+			/*
+			   The transferred area goes over buffer boundary,
+			   copy the data to the temp buffer.
+			 */
+			int len;
+
+			len = runtime->buffer_size - line6pcm->out.pos;
+
+			if (len > 0) {
+				memcpy(urb_out->transfer_buffer,
+				       runtime->dma_area +
+				       line6pcm->out.pos * bytes_per_frame,
+				       len * bytes_per_frame);
+				memcpy(urb_out->transfer_buffer +
+				       len * bytes_per_frame, runtime->dma_area,
+				       (urb_frames - len) * bytes_per_frame);
+			} else
+				dev_err(line6pcm->line6->ifcdev, "driver bug: len = %d\n",
+					len);
+		} else {
+			memcpy(urb_out->transfer_buffer,
+			       runtime->dma_area +
+			       line6pcm->out.pos * bytes_per_frame,
+			       urb_out->transfer_buffer_length);
+		}
+
+		line6pcm->out.pos += urb_frames;
+		if (line6pcm->out.pos >= runtime->buffer_size)
+			line6pcm->out.pos -= runtime->buffer_size;
+
+		change_volume(urb_out, line6pcm->volume_playback,
+			      bytes_per_frame);
+	} else {
+		memset(urb_out->transfer_buffer, 0,
+		       urb_out->transfer_buffer_length);
+	}
+
+	spin_lock_nested(&line6pcm->in.lock, SINGLE_DEPTH_NESTING);
+	if (line6pcm->prev_fbuf) {
+		if (test_bit(LINE6_STREAM_IMPULSE, &line6pcm->out.running)) {
+			create_impulse_test_signal(line6pcm, urb_out,
+						   bytes_per_frame);
+			if (test_bit(LINE6_STREAM_PCM, &line6pcm->in.running)) {
+				line6_capture_copy(line6pcm,
+						   urb_out->transfer_buffer,
+						   urb_out->
+						   transfer_buffer_length);
+				line6_capture_check_period(line6pcm,
+					urb_out->transfer_buffer_length);
+			}
+		} else {
+			if (!(line6pcm->line6->properties->capabilities & LINE6_CAP_HWMON)
+			    && line6pcm->out.running && line6pcm->in.running)
+				add_monitor_signal(urb_out, line6pcm->prev_fbuf,
+						   line6pcm->volume_monitor,
+						   bytes_per_frame);
+		}
+		line6pcm->prev_fbuf = NULL;
+		line6pcm->prev_fsize = 0;
+	}
+	spin_unlock(&line6pcm->in.lock);
+
+	ret = usb_submit_urb(urb_out, GFP_ATOMIC);
+
+	if (ret == 0)
+		set_bit(index, &line6pcm->out.active_urbs);
+	else
+		dev_err(line6pcm->line6->ifcdev,
+			"URB out #%d submission failed (%d)\n", index, ret);
+
+	return 0;
+}
+
+/*
+	Submit all currently available playback URBs.
+	must be called in line6pcm->out.lock context
+ */
+int line6_submit_audio_out_all_urbs(struct snd_line6_pcm *line6pcm)
+{
+	int ret = 0, i;
+
+	for (i = 0; i < line6pcm->line6->iso_buffers; ++i) {
+		ret = submit_audio_out_urb(line6pcm);
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+/*
+	Callback for completed playback URB.
+*/
+static void audio_out_callback(struct urb *urb)
+{
+	int i, index, length = 0, shutdown = 0;
+	unsigned long flags;
+	struct snd_line6_pcm *line6pcm = (struct snd_line6_pcm *)urb->context;
+	struct snd_pcm_substream *substream =
+	    get_substream(line6pcm, SNDRV_PCM_STREAM_PLAYBACK);
+	const int bytes_per_frame =
+		line6pcm->properties->bytes_per_channel *
+		line6pcm->properties->playback_hw.channels_max;
+
+#if USE_CLEAR_BUFFER_WORKAROUND
+	memset(urb->transfer_buffer, 0, urb->transfer_buffer_length);
+#endif
+
+	line6pcm->out.last_frame = urb->start_frame;
+
+	/* find index of URB */
+	for (index = 0; index < line6pcm->line6->iso_buffers; index++)
+		if (urb == line6pcm->out.urbs[index])
+			break;
+
+	if (index >= line6pcm->line6->iso_buffers)
+		return;		/* URB has been unlinked asynchronously */
+
+	for (i = 0; i < LINE6_ISO_PACKETS; i++)
+		length += urb->iso_frame_desc[i].length;
+
+	spin_lock_irqsave(&line6pcm->out.lock, flags);
+
+	if (test_bit(LINE6_STREAM_PCM, &line6pcm->out.running)) {
+		struct snd_pcm_runtime *runtime = substream->runtime;
+
+		line6pcm->out.pos_done +=
+		    length / bytes_per_frame;
+
+		if (line6pcm->out.pos_done >= runtime->buffer_size)
+			line6pcm->out.pos_done -= runtime->buffer_size;
+	}
+
+	clear_bit(index, &line6pcm->out.active_urbs);
+
+	for (i = 0; i < LINE6_ISO_PACKETS; i++)
+		if (urb->iso_frame_desc[i].status == -EXDEV) {
+			shutdown = 1;
+			break;
+		}
+
+	if (test_and_clear_bit(index, &line6pcm->out.unlink_urbs))
+		shutdown = 1;
+
+	if (!shutdown) {
+		submit_audio_out_urb(line6pcm);
+
+		if (test_bit(LINE6_STREAM_PCM, &line6pcm->out.running)) {
+			line6pcm->out.bytes += length;
+			if (line6pcm->out.bytes >= line6pcm->out.period) {
+				line6pcm->out.bytes %= line6pcm->out.period;
+				spin_unlock(&line6pcm->out.lock);
+				snd_pcm_period_elapsed(substream);
+				spin_lock(&line6pcm->out.lock);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&line6pcm->out.lock, flags);
+}
+
+/* open playback callback */
+static int snd_line6_playback_open(struct snd_pcm_substream *substream)
+{
+	int err;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+
+	err = snd_pcm_hw_constraint_ratdens(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
+					    &line6pcm->properties->rates);
+	if (err < 0)
+		return err;
+
+	runtime->hw = line6pcm->properties->playback_hw;
+	return 0;
+}
+
+/* close playback callback */
+static int snd_line6_playback_close(struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
+/* playback operators */
+const struct snd_pcm_ops snd_line6_playback_ops = {
+	.open = snd_line6_playback_open,
+	.close = snd_line6_playback_close,
+	.hw_params = snd_line6_hw_params,
+	.hw_free = snd_line6_hw_free,
+	.prepare = snd_line6_prepare,
+	.trigger = snd_line6_trigger,
+	.pointer = snd_line6_pointer,
+};
+
+int line6_create_audio_out_urbs(struct snd_line6_pcm *line6pcm)
+{
+	struct usb_line6 *line6 = line6pcm->line6;
+	int i;
+
+	line6pcm->out.urbs = kzalloc_objs(struct urb *, line6->iso_buffers);
+	if (line6pcm->out.urbs == NULL)
+		return -ENOMEM;
+
+	/* create audio URBs and fill in constant values: */
+	for (i = 0; i < line6->iso_buffers; ++i) {
+		struct urb *urb;
+
+		/* URB for audio out: */
+		urb = line6pcm->out.urbs[i] =
+		    usb_alloc_urb(LINE6_ISO_PACKETS, GFP_KERNEL);
+
+		if (urb == NULL)
+			return -ENOMEM;
+
+		urb->dev = line6->usbdev;
+		urb->pipe =
+		    usb_sndisocpipe(line6->usbdev,
+				    line6->properties->ep_audio_w &
+				    USB_ENDPOINT_NUMBER_MASK);
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->start_frame = -1;
+		urb->number_of_packets = LINE6_ISO_PACKETS;
+		urb->interval = LINE6_ISO_INTERVAL;
+		urb->error_count = 0;
+		urb->complete = audio_out_callback;
+		if (usb_urb_ep_type_check(urb))
+			return -EINVAL;
+	}
+
+	return 0;
+}

linux-7.2.3/sound/usb/line6/playback.h

@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ */
+
+#ifndef PLAYBACK_H
+#define PLAYBACK_H
+
+#include <sound/pcm.h>
+
+#include "driver.h"
+
+/*
+ * When the TonePort is used with jack in full duplex mode and the outputs are
+ * not connected, the software monitor produces an ugly noise since everything
+ * written to the output buffer (i.e., the input signal) will be repeated in
+ * the next period (sounds like a delay effect). As a workaround, the output
+ * buffer is cleared after the data have been read, but there must be a better
+ * solution. Until one is found, this workaround can be used to fix the
+ * problem.
+ */
+#define USE_CLEAR_BUFFER_WORKAROUND 1
+
+extern const struct snd_pcm_ops snd_line6_playback_ops;
+
+extern int line6_create_audio_out_urbs(struct snd_line6_pcm *line6pcm);
+extern int line6_submit_audio_out_all_urbs(struct snd_line6_pcm *line6pcm);
+
+#endif

linux-7.2.3/sound/usb/line6/pod.c

@@ -0,0 +1,542 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ */
+
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "playback.h"
+
+/*
+	Locate name in binary program dump
+*/
+#define	POD_NAME_OFFSET 0
+#define	POD_NAME_LENGTH 16
+
+/*
+	Other constants
+*/
+#define POD_CONTROL_SIZE 0x80
+#define POD_BUFSIZE_DUMPREQ 7
+#define POD_STARTUP_DELAY 1000
+
+/*
+	Stages of POD startup procedure
+*/
+enum {
+	POD_STARTUP_VERSIONREQ,
+	POD_STARTUP_SETUP,
+	POD_STARTUP_DONE,
+};
+
+enum {
+	LINE6_BASSPODXT,
+	LINE6_BASSPODXTLIVE,
+	LINE6_BASSPODXTPRO,
+	LINE6_POCKETPOD,
+	LINE6_PODXT,
+	LINE6_PODXTLIVE_POD,
+	LINE6_PODXTPRO,
+};
+
+struct usb_line6_pod {
+	/* Generic Line 6 USB data */
+	struct usb_line6 line6;
+
+	/* Instrument monitor level */
+	int monitor_level;
+
+	/* Current progress in startup procedure */
+	int startup_progress;
+
+	/* Serial number of device */
+	u32 serial_number;
+
+	/* Firmware version (x 100) */
+	int firmware_version;
+
+	/* Device ID */
+	int device_id;
+};
+
+#define line6_to_pod(x)		container_of(x, struct usb_line6_pod, line6)
+
+#define POD_SYSEX_CODE 3
+
+/* *INDENT-OFF* */
+
+enum {
+	POD_SYSEX_SAVE      = 0x24,
+	POD_SYSEX_SYSTEM    = 0x56,
+	POD_SYSEX_SYSTEMREQ = 0x57,
+	/* POD_SYSEX_UPDATE    = 0x6c, */  /* software update! */
+	POD_SYSEX_STORE     = 0x71,
+	POD_SYSEX_FINISH    = 0x72,
+	POD_SYSEX_DUMPMEM   = 0x73,
+	POD_SYSEX_DUMP      = 0x74,
+	POD_SYSEX_DUMPREQ   = 0x75
+
+	/* dumps entire internal memory of PODxt Pro */
+	/* POD_SYSEX_DUMPMEM2  = 0x76 */
+};
+
+enum {
+	POD_MONITOR_LEVEL  = 0x04,
+	POD_SYSTEM_INVALID = 0x10000
+};
+
+/* *INDENT-ON* */
+
+enum {
+	POD_DUMP_MEMORY = 2
+};
+
+enum {
+	POD_BUSY_READ,
+	POD_BUSY_WRITE,
+	POD_CHANNEL_DIRTY,
+	POD_SAVE_PRESSED,
+	POD_BUSY_MIDISEND
+};
+
+static const struct snd_ratden pod_ratden = {
+	.num_min = 78125,
+	.num_max = 78125,
+	.num_step = 1,
+	.den = 2
+};
+
+static struct line6_pcm_properties pod_pcm_properties = {
+	.playback_hw = {
+				  .info = (SNDRV_PCM_INFO_MMAP |
+					   SNDRV_PCM_INFO_INTERLEAVED |
+					   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					   SNDRV_PCM_INFO_MMAP_VALID |
+					   SNDRV_PCM_INFO_PAUSE |
+					   SNDRV_PCM_INFO_SYNC_START),
+				  .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+				  .rates = SNDRV_PCM_RATE_KNOT,
+				  .rate_min = 39062,
+				  .rate_max = 39063,
+				  .channels_min = 2,
+				  .channels_max = 2,
+				  .buffer_bytes_max = 60000,
+				  .period_bytes_min = 64,
+				  .period_bytes_max = 8192,
+				  .periods_min = 1,
+				  .periods_max = 1024},
+	.capture_hw = {
+				 .info = (SNDRV_PCM_INFO_MMAP |
+					  SNDRV_PCM_INFO_INTERLEAVED |
+					  SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					  SNDRV_PCM_INFO_MMAP_VALID |
+					  SNDRV_PCM_INFO_SYNC_START),
+				 .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+				 .rates = SNDRV_PCM_RATE_KNOT,
+				 .rate_min = 39062,
+				 .rate_max = 39063,
+				 .channels_min = 2,
+				 .channels_max = 2,
+				 .buffer_bytes_max = 60000,
+				 .period_bytes_min = 64,
+				 .period_bytes_max = 8192,
+				 .periods_min = 1,
+				 .periods_max = 1024},
+	.rates = {
+			    .nrats = 1,
+			    .rats = &pod_ratden},
+	.bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */
+};
+
+
+static const char pod_version_header[] = {
+	0xf0, 0x7e, 0x7f, 0x06, 0x02
+};
+
+static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
+				    int size)
+{
+	return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code,
+					size);
+}
+
+/*
+	Process a completely received message.
+*/
+static void line6_pod_process_message(struct usb_line6 *line6)
+{
+	struct usb_line6_pod *pod = line6_to_pod(line6);
+	const unsigned char *buf = pod->line6.buffer_message;
+
+	if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) {
+		pod->firmware_version = buf[13] * 100 + buf[14] * 10 + buf[15];
+		pod->device_id = ((int)buf[8] << 16) | ((int)buf[9] << 8) |
+				 (int) buf[10];
+		if (pod->startup_progress == POD_STARTUP_VERSIONREQ) {
+			pod->startup_progress = POD_STARTUP_SETUP;
+			schedule_delayed_work(&line6->startup_work, 0);
+		}
+		return;
+	}
+
+	/* Only look for sysex messages from this device */
+	if (buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_DEVICE) &&
+	    buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_UNKNOWN)) {
+		return;
+	}
+	if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) != 0)
+		return;
+
+	if (buf[5] == POD_SYSEX_SYSTEM && buf[6] == POD_MONITOR_LEVEL) {
+		short value = ((int)buf[7] << 12) | ((int)buf[8] << 8) |
+			      ((int)buf[9] << 4) | (int)buf[10];
+		pod->monitor_level = value;
+	}
+}
+
+/*
+	Send system parameter (from integer).
+*/
+static int pod_set_system_param_int(struct usb_line6_pod *pod, int value,
+				    int code)
+{
+	char *sysex;
+	static const int size = 5;
+
+	sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_SYSTEM, size);
+	if (!sysex)
+		return -ENOMEM;
+	sysex[SYSEX_DATA_OFS] = code;
+	sysex[SYSEX_DATA_OFS + 1] = (value >> 12) & 0x0f;
+	sysex[SYSEX_DATA_OFS + 2] = (value >> 8) & 0x0f;
+	sysex[SYSEX_DATA_OFS + 3] = (value >> 4) & 0x0f;
+	sysex[SYSEX_DATA_OFS + 4] = (value) & 0x0f;
+	line6_send_sysex_message(&pod->line6, sysex, size);
+	kfree(sysex);
+	return 0;
+}
+
+/*
+	"read" request on "serial_number" special file.
+*/
+static ssize_t serial_number_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct snd_card *card = dev_to_snd_card(dev);
+	struct usb_line6_pod *pod = card->private_data;
+
+	return sysfs_emit(buf, "%u\n", pod->serial_number);
+}
+
+/*
+	"read" request on "firmware_version" special file.
+*/
+static ssize_t firmware_version_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct snd_card *card = dev_to_snd_card(dev);
+	struct usb_line6_pod *pod = card->private_data;
+
+	return sysfs_emit(buf, "%d.%02d\n", pod->firmware_version / 100,
+			  pod->firmware_version % 100);
+}
+
+/*
+	"read" request on "device_id" special file.
+*/
+static ssize_t device_id_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct snd_card *card = dev_to_snd_card(dev);
+	struct usb_line6_pod *pod = card->private_data;
+
+	return sysfs_emit(buf, "%d\n", pod->device_id);
+}
+
+/*
+	POD startup procedure.
+	This is a sequence of functions with special requirements (e.g., must
+	not run immediately after initialization, must not run in interrupt
+	context). After the last one has finished, the device is ready to use.
+*/
+
+static void pod_startup(struct usb_line6 *line6)
+{
+	struct usb_line6_pod *pod = line6_to_pod(line6);
+
+	switch (pod->startup_progress) {
+	case POD_STARTUP_VERSIONREQ:
+		/* request firmware version: */
+		line6_version_request_async(line6);
+		break;
+	case POD_STARTUP_SETUP:
+		/* serial number: */
+		line6_read_serial_number(&pod->line6, &pod->serial_number);
+
+		/* ALSA audio interface: */
+		if (snd_card_register(line6->card))
+			dev_err(line6->ifcdev, "Failed to register POD card.\n");
+		pod->startup_progress = POD_STARTUP_DONE;
+		break;
+	default:
+		break;
+	}
+}
+
+/* POD special files: */
+static DEVICE_ATTR_RO(device_id);
+static DEVICE_ATTR_RO(firmware_version);
+static DEVICE_ATTR_RO(serial_number);
+
+static struct attribute *pod_dev_attrs[] = {
+	&dev_attr_device_id.attr,
+	&dev_attr_firmware_version.attr,
+	&dev_attr_serial_number.attr,
+	NULL
+};
+
+static const struct attribute_group pod_dev_attr_group = {
+	.name = "pod",
+	.attrs = pod_dev_attrs,
+};
+
+/* control info callback */
+static int snd_pod_control_monitor_info(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 65535;
+	return 0;
+}
+
+/* control get callback */
+static int snd_pod_control_monitor_get(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6);
+
+	ucontrol->value.integer.value[0] = pod->monitor_level;
+	return 0;
+}
+
+/* control put callback */
+static int snd_pod_control_monitor_put(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6);
+
+	if (ucontrol->value.integer.value[0] == pod->monitor_level)
+		return 0;
+
+	pod->monitor_level = ucontrol->value.integer.value[0];
+	pod_set_system_param_int(pod, ucontrol->value.integer.value[0],
+				 POD_MONITOR_LEVEL);
+	return 1;
+}
+
+/* control definition */
+static const struct snd_kcontrol_new pod_control_monitor = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Monitor Playback Volume",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = snd_pod_control_monitor_info,
+	.get = snd_pod_control_monitor_get,
+	.put = snd_pod_control_monitor_put
+};
+
+/*
+	 Try to init POD device.
+*/
+static int pod_init(struct usb_line6 *line6,
+		    const struct usb_device_id *id)
+{
+	int err;
+	struct usb_line6_pod *pod = line6_to_pod(line6);
+
+	line6->process_message = line6_pod_process_message;
+	line6->startup = pod_startup;
+
+	/* create sysfs entries: */
+	err = snd_card_add_dev_attr(line6->card, &pod_dev_attr_group);
+	if (err < 0)
+		return err;
+
+	/* initialize PCM subsystem: */
+	err = line6_init_pcm(line6, &pod_pcm_properties);
+	if (err < 0)
+		return err;
+
+	/* register monitor control: */
+	err = snd_ctl_add(line6->card,
+			  snd_ctl_new1(&pod_control_monitor, line6->line6pcm));
+	if (err < 0)
+		return err;
+
+	/*
+	   When the sound card is registered at this point, the PODxt Live
+	   displays "Invalid Code Error 07", so we do it later in the event
+	   handler.
+	 */
+
+	if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
+		pod->monitor_level = POD_SYSTEM_INVALID;
+
+		/* initiate startup procedure: */
+		schedule_delayed_work(&line6->startup_work,
+				      msecs_to_jiffies(POD_STARTUP_DELAY));
+	}
+
+	return 0;
+}
+
+#define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
+#define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
+
+/* table of devices that work with this driver */
+static const struct usb_device_id pod_id_table[] = {
+	{ LINE6_DEVICE(0x4250),    .driver_info = LINE6_BASSPODXT },
+	{ LINE6_DEVICE(0x4642),    .driver_info = LINE6_BASSPODXTLIVE },
+	{ LINE6_DEVICE(0x4252),    .driver_info = LINE6_BASSPODXTPRO },
+	{ LINE6_IF_NUM(0x5051, 1), .driver_info = LINE6_POCKETPOD },
+	{ LINE6_DEVICE(0x5044),    .driver_info = LINE6_PODXT },
+	{ LINE6_IF_NUM(0x4650, 0), .driver_info = LINE6_PODXTLIVE_POD },
+	{ LINE6_DEVICE(0x5050),    .driver_info = LINE6_PODXTPRO },
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, pod_id_table);
+
+static const struct line6_properties pod_properties_table[] = {
+	[LINE6_BASSPODXT] = {
+		.id = "BassPODxt",
+		.name = "BassPODxt",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_BASSPODXTLIVE] = {
+		.id = "BassPODxtLive",
+		.name = "BassPODxt Live",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_BASSPODXTPRO] = {
+		.id = "BassPODxtPro",
+		.name = "BassPODxt Pro",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_POCKETPOD] = {
+		.id = "PocketPOD",
+		.name = "Pocket POD",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI,
+		.altsetting = 0,
+		.ep_ctrl_r = 0x82,
+		.ep_ctrl_w = 0x02,
+		/* no audio channel */
+	},
+	[LINE6_PODXT] = {
+		.id = "PODxt",
+		.name = "PODxt",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODXTLIVE_POD] = {
+		.id = "PODxtLive",
+		.name = "PODxt Live",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODXTPRO] = {
+		.id = "PODxtPro",
+		.name = "PODxt Pro",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+};
+
+/*
+	Probe USB device.
+*/
+static int pod_probe(struct usb_interface *interface,
+		     const struct usb_device_id *id)
+{
+	return line6_probe(interface, id, "Line6-POD",
+			   &pod_properties_table[id->driver_info],
+			   pod_init, sizeof(struct usb_line6_pod));
+}
+
+static struct usb_driver pod_driver = {
+	.name = KBUILD_MODNAME,
+	.probe = pod_probe,
+	.disconnect = line6_disconnect,
+#ifdef CONFIG_PM
+	.suspend = line6_suspend,
+	.resume = line6_resume,
+	.reset_resume = line6_resume,
+#endif
+	.id_table = pod_id_table,
+};
+
+module_usb_driver(pod_driver);
+
+MODULE_DESCRIPTION("Line 6 POD USB driver");
+MODULE_LICENSE("GPL");

linux-7.2.3/sound/usb/line6/podhd.c

@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Line 6 Pod HD
+ *
+ * Copyright (C) 2011 Stefan Hajnoczi <stefanha@gmail.com>
+ * Copyright (C) 2015 Andrej Krutak <dev@andree.sk>
+ * Copyright (C) 2017 Hans P. Moller <hmoller@uc.cl>
+ */
+
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+
+#include "driver.h"
+#include "pcm.h"
+
+#define PODHD_STARTUP_DELAY 500
+
+enum {
+	LINE6_PODHD300,
+	LINE6_PODHD400,
+	LINE6_PODHD500,
+	LINE6_PODX3,
+	LINE6_PODX3LIVE,
+	LINE6_PODHD500X,
+	LINE6_PODHDDESKTOP,
+	LINE6_PODHDPROX,
+	LINE6_PODHDPRO,
+};
+
+struct usb_line6_podhd {
+	/* Generic Line 6 USB data */
+	struct usb_line6 line6;
+
+	/* Serial number of device */
+	u32 serial_number;
+
+	/* Firmware version */
+	int firmware_version;
+
+	/* Monitor level */
+	int monitor_level;
+};
+
+#define line6_to_podhd(x)	container_of(x, struct usb_line6_podhd, line6)
+
+static const struct snd_ratden podhd_ratden = {
+	.num_min = 48000,
+	.num_max = 48000,
+	.num_step = 1,
+	.den = 1,
+};
+
+static struct line6_pcm_properties podhd_pcm_properties = {
+	.playback_hw = {
+				  .info = (SNDRV_PCM_INFO_MMAP |
+					   SNDRV_PCM_INFO_INTERLEAVED |
+					   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					   SNDRV_PCM_INFO_MMAP_VALID |
+					   SNDRV_PCM_INFO_PAUSE |
+					   SNDRV_PCM_INFO_SYNC_START),
+				  .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+				  .rates = SNDRV_PCM_RATE_48000,
+				  .rate_min = 48000,
+				  .rate_max = 48000,
+				  .channels_min = 2,
+				  .channels_max = 2,
+				  .buffer_bytes_max = 60000,
+				  .period_bytes_min = 64,
+				  .period_bytes_max = 8192,
+				  .periods_min = 1,
+				  .periods_max = 1024},
+	.capture_hw = {
+				 .info = (SNDRV_PCM_INFO_MMAP |
+					  SNDRV_PCM_INFO_INTERLEAVED |
+					  SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					  SNDRV_PCM_INFO_MMAP_VALID |
+					  SNDRV_PCM_INFO_SYNC_START),
+				 .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+				 .rates = SNDRV_PCM_RATE_48000,
+				 .rate_min = 48000,
+				 .rate_max = 48000,
+				 .channels_min = 2,
+				 .channels_max = 2,
+				 .buffer_bytes_max = 60000,
+				 .period_bytes_min = 64,
+				 .period_bytes_max = 8192,
+				 .periods_min = 1,
+				 .periods_max = 1024},
+	.rates = {
+			    .nrats = 1,
+			    .rats = &podhd_ratden},
+	.bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */
+};
+
+static struct line6_pcm_properties podx3_pcm_properties = {
+	.playback_hw = {
+				  .info = (SNDRV_PCM_INFO_MMAP |
+					   SNDRV_PCM_INFO_INTERLEAVED |
+					   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					   SNDRV_PCM_INFO_MMAP_VALID |
+					   SNDRV_PCM_INFO_PAUSE |
+					   SNDRV_PCM_INFO_SYNC_START),
+				  .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+				  .rates = SNDRV_PCM_RATE_48000,
+				  .rate_min = 48000,
+				  .rate_max = 48000,
+				  .channels_min = 2,
+				  .channels_max = 2,
+				  .buffer_bytes_max = 60000,
+				  .period_bytes_min = 64,
+				  .period_bytes_max = 8192,
+				  .periods_min = 1,
+				  .periods_max = 1024},
+	.capture_hw = {
+				 .info = (SNDRV_PCM_INFO_MMAP |
+					  SNDRV_PCM_INFO_INTERLEAVED |
+					  SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					  SNDRV_PCM_INFO_MMAP_VALID |
+					  SNDRV_PCM_INFO_SYNC_START),
+				 .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+				 .rates = SNDRV_PCM_RATE_48000,
+				 .rate_min = 48000,
+				 .rate_max = 48000,
+				 /* 1+2: Main signal (out), 3+4: Tone 1,
+				  * 5+6: Tone 2, 7+8: raw
+				  */
+				 .channels_min = 8,
+				 .channels_max = 8,
+				 .buffer_bytes_max = 60000,
+				 .period_bytes_min = 64,
+				 .period_bytes_max = 8192,
+				 .periods_min = 1,
+				 .periods_max = 1024},
+	.rates = {
+			    .nrats = 1,
+			    .rats = &podhd_ratden},
+	.bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */
+};
+static struct usb_driver podhd_driver;
+
+static ssize_t serial_number_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct snd_card *card = dev_to_snd_card(dev);
+	struct usb_line6_podhd *pod = card->private_data;
+
+	return sysfs_emit(buf, "%u\n", pod->serial_number);
+}
+
+static ssize_t firmware_version_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct snd_card *card = dev_to_snd_card(dev);
+	struct usb_line6_podhd *pod = card->private_data;
+
+	return sysfs_emit(buf, "%06x\n", pod->firmware_version);
+}
+
+static DEVICE_ATTR_RO(firmware_version);
+static DEVICE_ATTR_RO(serial_number);
+
+static struct attribute *podhd_dev_attrs[] = {
+	&dev_attr_firmware_version.attr,
+	&dev_attr_serial_number.attr,
+	NULL
+};
+
+static const struct attribute_group podhd_dev_attr_group = {
+	.name = "podhd",
+	.attrs = podhd_dev_attrs,
+};
+
+/*
+ * POD X3 startup procedure.
+ *
+ * May be compatible with other POD HD's, since it's also similar to the
+ * previous POD setup. In any case, it doesn't seem to be required for the
+ * audio nor bulk interfaces to work.
+ */
+
+static int podhd_dev_start(struct usb_line6_podhd *pod)
+{
+	int ret;
+	u8 init_bytes[8];
+	int i;
+	struct usb_device *usbdev = pod->line6.usbdev;
+
+	ret = usb_control_msg_send(usbdev, 0,
+					0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+					0x11, 0,
+					NULL, 0, LINE6_TIMEOUT, GFP_KERNEL);
+	if (ret) {
+		dev_err(pod->line6.ifcdev, "read request failed (error %d)\n", ret);
+		goto exit;
+	}
+
+	/* NOTE: looks like some kind of ping message */
+	ret = usb_control_msg_recv(usbdev, 0, 0x67,
+					USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+					0x11, 0x0,
+					init_bytes, 3, LINE6_TIMEOUT, GFP_KERNEL);
+	if (ret) {
+		dev_err(pod->line6.ifcdev,
+			"receive length failed (error %d)\n", ret);
+		goto exit;
+	}
+
+	pod->firmware_version =
+		(init_bytes[0] << 16) | (init_bytes[1] << 8) | (init_bytes[2] << 0);
+
+	for (i = 0; i <= 16; i++) {
+		ret = line6_read_data(&pod->line6, 0xf000 + 0x08 * i, init_bytes, 8);
+		if (ret < 0)
+			goto exit;
+	}
+
+	ret = usb_control_msg_send(usbdev, 0,
+					USB_REQ_SET_FEATURE,
+					USB_TYPE_STANDARD | USB_RECIP_DEVICE | USB_DIR_OUT,
+					1, 0,
+					NULL, 0, LINE6_TIMEOUT, GFP_KERNEL);
+exit:
+	return ret;
+}
+
+static void podhd_startup(struct usb_line6 *line6)
+{
+	struct usb_line6_podhd *pod = line6_to_podhd(line6);
+
+	podhd_dev_start(pod);
+	line6_read_serial_number(&pod->line6, &pod->serial_number);
+	if (snd_card_register(line6->card))
+		dev_err(line6->ifcdev, "Failed to register POD HD card.\n");
+}
+
+static void podhd_disconnect(struct usb_line6 *line6)
+{
+	struct usb_line6_podhd *pod = line6_to_podhd(line6);
+
+	if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL_INFO) {
+		struct usb_interface *intf;
+
+		intf = usb_ifnum_to_if(line6->usbdev,
+					pod->line6.properties->ctrl_if);
+		if (intf)
+			usb_driver_release_interface(&podhd_driver, intf);
+	}
+}
+
+static const unsigned int float_zero_to_one_lookup[] = {
+0x00000000, 0x3c23d70a, 0x3ca3d70a, 0x3cf5c28f, 0x3d23d70a, 0x3d4ccccd,
+0x3d75c28f, 0x3d8f5c29, 0x3da3d70a, 0x3db851ec, 0x3dcccccd, 0x3de147ae,
+0x3df5c28f, 0x3e051eb8, 0x3e0f5c29, 0x3e19999a, 0x3e23d70a, 0x3e2e147b,
+0x3e3851ec, 0x3e428f5c, 0x3e4ccccd, 0x3e570a3d, 0x3e6147ae, 0x3e6b851f,
+0x3e75c28f, 0x3e800000, 0x3e851eb8, 0x3e8a3d71, 0x3e8f5c29, 0x3e947ae1,
+0x3e99999a, 0x3e9eb852, 0x3ea3d70a, 0x3ea8f5c3, 0x3eae147b, 0x3eb33333,
+0x3eb851ec, 0x3ebd70a4, 0x3ec28f5c, 0x3ec7ae14, 0x3ecccccd, 0x3ed1eb85,
+0x3ed70a3d, 0x3edc28f6, 0x3ee147ae, 0x3ee66666, 0x3eeb851f, 0x3ef0a3d7,
+0x3ef5c28f, 0x3efae148, 0x3f000000, 0x3f028f5c, 0x3f051eb8, 0x3f07ae14,
+0x3f0a3d71, 0x3f0ccccd, 0x3f0f5c29, 0x3f11eb85, 0x3f147ae1, 0x3f170a3d,
+0x3f19999a, 0x3f1c28f6, 0x3f1eb852, 0x3f2147ae, 0x3f23d70a, 0x3f266666,
+0x3f28f5c3, 0x3f2b851f, 0x3f2e147b, 0x3f30a3d7, 0x3f333333, 0x3f35c28f,
+0x3f3851ec, 0x3f3ae148, 0x3f3d70a4, 0x3f400000, 0x3f428f5c, 0x3f451eb8,
+0x3f47ae14, 0x3f4a3d71, 0x3f4ccccd, 0x3f4f5c29, 0x3f51eb85, 0x3f547ae1,
+0x3f570a3d, 0x3f59999a, 0x3f5c28f6, 0x3f5eb852, 0x3f6147ae, 0x3f63d70a,
+0x3f666666, 0x3f68f5c3, 0x3f6b851f, 0x3f6e147b, 0x3f70a3d7, 0x3f733333,
+0x3f75c28f, 0x3f7851ec, 0x3f7ae148, 0x3f7d70a4, 0x3f800000
+};
+
+static void podhd_set_monitor_level(struct usb_line6_podhd *podhd, int value)
+{
+	unsigned int fl;
+	static const unsigned char msg[16] = {
+		/* Chunk is 0xc bytes (without first word) */
+		0x0c, 0x00,
+		/* First chunk in the message */
+		0x01, 0x00,
+		/* Message size is 2 4-byte words */
+		0x02, 0x00,
+		/* Unknown */
+		0x04, 0x41,
+		/* Unknown */
+		0x04, 0x00, 0x13, 0x00,
+		/* Volume, LE float32, 0.0 - 1.0 */
+		0x00, 0x00, 0x00, 0x00
+	};
+	unsigned char *buf;
+
+	buf = kmemdup(msg, sizeof(msg), GFP_KERNEL);
+	if (!buf)
+		return;
+
+	if (value < 0)
+		value = 0;
+
+	if (value >= ARRAY_SIZE(float_zero_to_one_lookup))
+		value = ARRAY_SIZE(float_zero_to_one_lookup) - 1;
+
+	fl = float_zero_to_one_lookup[value];
+
+	buf[12] = (fl >> 0) & 0xff;
+	buf[13] = (fl >> 8) & 0xff;
+	buf[14] = (fl >> 16) & 0xff;
+	buf[15] = (fl >> 24) & 0xff;
+
+	line6_send_raw_message(&podhd->line6, buf, sizeof(msg));
+	kfree(buf);
+
+	podhd->monitor_level = value;
+}
+
+/* control info callback */
+static int snd_podhd_control_monitor_info(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 100;
+	uinfo->value.integer.step = 1;
+	return 0;
+}
+
+/* control get callback */
+static int snd_podhd_control_monitor_get(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_podhd *podhd = line6_to_podhd(line6pcm->line6);
+
+	ucontrol->value.integer.value[0] = podhd->monitor_level;
+	return 0;
+}
+
+/* control put callback */
+static int snd_podhd_control_monitor_put(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_podhd *podhd = line6_to_podhd(line6pcm->line6);
+
+	if (ucontrol->value.integer.value[0] == podhd->monitor_level)
+		return 0;
+
+	podhd_set_monitor_level(podhd, ucontrol->value.integer.value[0]);
+	return 1;
+}
+
+/* control definition */
+static const struct snd_kcontrol_new podhd_control_monitor = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Monitor Playback Volume",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = snd_podhd_control_monitor_info,
+	.get = snd_podhd_control_monitor_get,
+	.put = snd_podhd_control_monitor_put
+};
+
+/*
+	Try to init POD HD device.
+*/
+static int podhd_init(struct usb_line6 *line6,
+		      const struct usb_device_id *id)
+{
+	int err;
+	struct usb_line6_podhd *pod = line6_to_podhd(line6);
+	struct usb_interface *intf;
+
+	line6->disconnect = podhd_disconnect;
+	line6->startup = podhd_startup;
+
+	if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
+		/* claim the data interface */
+		intf = usb_ifnum_to_if(line6->usbdev,
+					pod->line6.properties->ctrl_if);
+		if (!intf) {
+			dev_err(pod->line6.ifcdev, "interface %d not found\n",
+				pod->line6.properties->ctrl_if);
+			return -ENODEV;
+		}
+
+		err = usb_driver_claim_interface(&podhd_driver, intf, NULL);
+		if (err != 0) {
+			dev_err(pod->line6.ifcdev, "can't claim interface %d, error %d\n",
+				pod->line6.properties->ctrl_if, err);
+			return err;
+		}
+	}
+
+	if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL_INFO) {
+		/* create sysfs entries: */
+		err = snd_card_add_dev_attr(line6->card, &podhd_dev_attr_group);
+		if (err < 0)
+			return err;
+	}
+
+	if (pod->line6.properties->capabilities & LINE6_CAP_PCM) {
+		/* initialize PCM subsystem: */
+		err = line6_init_pcm(line6,
+			(id->driver_info == LINE6_PODX3 ||
+			id->driver_info == LINE6_PODX3LIVE) ? &podx3_pcm_properties :
+			&podhd_pcm_properties);
+		if (err < 0)
+			return err;
+	}
+
+	if (pod->line6.properties->capabilities & LINE6_CAP_HWMON_CTL) {
+		podhd_set_monitor_level(pod, 100);
+		err = snd_ctl_add(line6->card,
+				  snd_ctl_new1(&podhd_control_monitor,
+					       line6->line6pcm));
+		if (err < 0)
+			return err;
+	}
+
+	if (!(pod->line6.properties->capabilities & LINE6_CAP_CONTROL_INFO)) {
+		/* register USB audio system directly */
+		return snd_card_register(line6->card);
+	}
+
+	/* init device and delay registering */
+	schedule_delayed_work(&line6->startup_work,
+			      msecs_to_jiffies(PODHD_STARTUP_DELAY));
+	return 0;
+}
+
+#define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
+#define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
+
+/* table of devices that work with this driver */
+static const struct usb_device_id podhd_id_table[] = {
+	/* TODO: no need to alloc data interfaces when only audio is used */
+	{ LINE6_DEVICE(0x5057),    .driver_info = LINE6_PODHD300 },
+	{ LINE6_DEVICE(0x5058),    .driver_info = LINE6_PODHD400 },
+	{ LINE6_IF_NUM(0x414D, 0), .driver_info = LINE6_PODHD500 },
+	{ LINE6_IF_NUM(0x414A, 0), .driver_info = LINE6_PODX3 },
+	{ LINE6_IF_NUM(0x414B, 0), .driver_info = LINE6_PODX3LIVE },
+	{ LINE6_IF_NUM(0x4159, 0), .driver_info = LINE6_PODHD500X },
+	{ LINE6_IF_NUM(0x4156, 0), .driver_info = LINE6_PODHDDESKTOP },
+	{ LINE6_IF_NUM(0x415A, 0), .driver_info = LINE6_PODHDPROX },
+	{ LINE6_IF_NUM(0x4157, 0), .driver_info = LINE6_PODHDPRO },
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, podhd_id_table);
+
+static const struct line6_properties podhd_properties_table[] = {
+	[LINE6_PODHD300] = {
+		.id = "PODHD300",
+		.name = "POD HD300",
+		.capabilities	= LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODHD400] = {
+		.id = "PODHD400",
+		.name = "POD HD400",
+		.capabilities	= LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODHD500] = {
+		.id = "PODHD500",
+		.name = "POD HD500",
+		.capabilities	= LINE6_CAP_PCM | LINE6_CAP_CONTROL
+				| LINE6_CAP_HWMON | LINE6_CAP_HWMON_CTL,
+		.altsetting = 1,
+		.ctrl_if = 1,
+		.ep_ctrl_r = 0x81,
+		.ep_ctrl_w = 0x01,
+		.ep_audio_r = 0x86,
+		.ep_audio_w = 0x02,
+	},
+	[LINE6_PODX3] = {
+		.id = "PODX3",
+		.name = "POD X3",
+		.capabilities	= LINE6_CAP_CONTROL | LINE6_CAP_CONTROL_INFO
+				| LINE6_CAP_PCM | LINE6_CAP_HWMON | LINE6_CAP_IN_NEEDS_OUT,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x81,
+		.ep_ctrl_w = 0x01,
+		.ctrl_if = 1,
+		.ep_audio_r = 0x86,
+		.ep_audio_w = 0x02,
+	},
+	[LINE6_PODX3LIVE] = {
+		.id = "PODX3LIVE",
+		.name = "POD X3 LIVE",
+		.capabilities	= LINE6_CAP_CONTROL | LINE6_CAP_CONTROL_INFO
+				| LINE6_CAP_PCM | LINE6_CAP_HWMON | LINE6_CAP_IN_NEEDS_OUT,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x81,
+		.ep_ctrl_w = 0x01,
+		.ctrl_if = 1,
+		.ep_audio_r = 0x86,
+		.ep_audio_w = 0x02,
+	},
+	[LINE6_PODHD500X] = {
+		.id = "PODHD500X",
+		.name = "POD HD500X",
+		.capabilities	= LINE6_CAP_CONTROL | LINE6_CAP_HWMON_CTL
+				| LINE6_CAP_PCM | LINE6_CAP_HWMON,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x81,
+		.ep_ctrl_w = 0x01,
+		.ctrl_if = 1,
+		.ep_audio_r = 0x86,
+		.ep_audio_w = 0x02,
+	},
+	[LINE6_PODHDDESKTOP] = {
+		.id = "PODHDDESKTOP",
+		.name = "POD HDDESKTOP",
+		.capabilities    = LINE6_CAP_CONTROL
+			| LINE6_CAP_PCM | LINE6_CAP_HWMON,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x81,
+		.ep_ctrl_w = 0x01,
+		.ctrl_if = 1,
+		.ep_audio_r = 0x86,
+		.ep_audio_w = 0x02,
+	},
+	[LINE6_PODHDPROX] = {
+		.id = "PODHDPROX",
+		.name = "POD HD Pro X",
+		.capabilities	= LINE6_CAP_CONTROL | LINE6_CAP_CONTROL_INFO
+				| LINE6_CAP_PCM | LINE6_CAP_HWMON | LINE6_CAP_IN_NEEDS_OUT,
+		.altsetting = 1,
+		.ctrl_if = 1,
+		.ep_ctrl_r = 0x81,
+		.ep_ctrl_w = 0x01,
+		.ep_audio_r = 0x86,
+		.ep_audio_w = 0x02,
+	},
+	[LINE6_PODHDPRO] = {
+		.id = "PODHDPRO",
+		.name = "POD HD PRO",
+		.capabilities	= LINE6_CAP_PCM | LINE6_CAP_CONTROL
+				| LINE6_CAP_HWMON | LINE6_CAP_HWMON_CTL | LINE6_CAP_IN_NEEDS_OUT,
+		.altsetting = 1,
+		.ctrl_if = 1,
+		.ep_ctrl_r = 0x81,
+		.ep_ctrl_w = 0x01,
+		.ep_audio_r = 0x86,
+		.ep_audio_w = 0x02,
+	},
+};
+
+/*
+	Probe USB device.
+*/
+static int podhd_probe(struct usb_interface *interface,
+		       const struct usb_device_id *id)
+{
+	return line6_probe(interface, id, "Line6-PODHD",
+			   &podhd_properties_table[id->driver_info],
+			   podhd_init, sizeof(struct usb_line6_podhd));
+}
+
+static struct usb_driver podhd_driver = {
+	.name = KBUILD_MODNAME,
+	.probe = podhd_probe,
+	.disconnect = line6_disconnect,
+#ifdef CONFIG_PM
+	.suspend = line6_suspend,
+	.resume = line6_resume,
+	.reset_resume = line6_resume,
+#endif
+	.id_table = podhd_id_table,
+};
+
+module_usb_driver(podhd_driver);
+
+MODULE_DESCRIPTION("Line 6 PODHD USB driver");
+MODULE_LICENSE("GPL");

linux-7.2.3/sound/usb/line6/toneport.c

@@ -0,0 +1,582 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ *                         Emil Myhrman (emil.myhrman@gmail.com)
+ */
+
+#include <linux/wait.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/leds.h>
+#include <sound/core.h>
+#include <sound/control.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "playback.h"
+
+enum line6_device_type {
+	LINE6_GUITARPORT,
+	LINE6_PODSTUDIO_GX,
+	LINE6_PODSTUDIO_UX1,
+	LINE6_PODSTUDIO_UX2,
+	LINE6_TONEPORT_GX,
+	LINE6_TONEPORT_UX1,
+	LINE6_TONEPORT_UX2,
+};
+
+struct usb_line6_toneport;
+
+struct toneport_led {
+	struct led_classdev dev;
+	char name[64];
+	struct usb_line6_toneport *toneport;
+	bool registered;
+};
+
+struct usb_line6_toneport {
+	/* Generic Line 6 USB data */
+	struct usb_line6 line6;
+
+	/* Source selector */
+	int source;
+
+	/* Serial number of device */
+	u32 serial_number;
+
+	/* Firmware version (x 100) */
+	u8 firmware_version;
+
+	/* Device type */
+	enum line6_device_type type;
+
+	/* LED instances */
+	struct toneport_led leds[2];
+};
+
+#define line6_to_toneport(x) container_of(x, struct usb_line6_toneport, line6)
+
+static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2);
+
+#define TONEPORT_PCM_DELAY 1
+
+static const struct snd_ratden toneport_ratden = {
+	.num_min = 44100,
+	.num_max = 44100,
+	.num_step = 1,
+	.den = 1
+};
+
+static struct line6_pcm_properties toneport_pcm_properties = {
+	.playback_hw = {
+				  .info = (SNDRV_PCM_INFO_MMAP |
+					   SNDRV_PCM_INFO_INTERLEAVED |
+					   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					   SNDRV_PCM_INFO_MMAP_VALID |
+					   SNDRV_PCM_INFO_PAUSE |
+					   SNDRV_PCM_INFO_SYNC_START),
+				  .formats = SNDRV_PCM_FMTBIT_S16_LE,
+				  .rates = SNDRV_PCM_RATE_KNOT,
+				  .rate_min = 44100,
+				  .rate_max = 44100,
+				  .channels_min = 2,
+				  .channels_max = 2,
+				  .buffer_bytes_max = 60000,
+				  .period_bytes_min = 64,
+				  .period_bytes_max = 8192,
+				  .periods_min = 1,
+				  .periods_max = 1024},
+	.capture_hw = {
+				 .info = (SNDRV_PCM_INFO_MMAP |
+					  SNDRV_PCM_INFO_INTERLEAVED |
+					  SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					  SNDRV_PCM_INFO_MMAP_VALID |
+					  SNDRV_PCM_INFO_SYNC_START),
+				 .formats = SNDRV_PCM_FMTBIT_S16_LE,
+				 .rates = SNDRV_PCM_RATE_KNOT,
+				 .rate_min = 44100,
+				 .rate_max = 44100,
+				 .channels_min = 2,
+				 .channels_max = 2,
+				 .buffer_bytes_max = 60000,
+				 .period_bytes_min = 64,
+				 .period_bytes_max = 8192,
+				 .periods_min = 1,
+				 .periods_max = 1024},
+	.rates = {
+			    .nrats = 1,
+			    .rats = &toneport_ratden},
+	.bytes_per_channel = 2
+};
+
+static const struct {
+	const char *name;
+	int code;
+} toneport_source_info[] = {
+	{"Microphone", 0x0a01},
+	{"Line", 0x0801},
+	{"Instrument", 0x0b01},
+	{"Inst & Mic", 0x0901}
+};
+
+static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
+{
+	int ret;
+
+	ret = usb_control_msg_send(usbdev, 0, 0x67,
+				   USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+				   cmd1, cmd2, NULL, 0, LINE6_TIMEOUT,
+				   GFP_KERNEL);
+
+	if (ret) {
+		dev_err(&usbdev->dev, "send failed (error %d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/* monitor info callback */
+static int snd_toneport_monitor_info(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 256;
+	return 0;
+}
+
+/* monitor get callback */
+static int snd_toneport_monitor_get(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = line6pcm->volume_monitor;
+	return 0;
+}
+
+/* monitor put callback */
+static int snd_toneport_monitor_put(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	int err;
+
+	if (ucontrol->value.integer.value[0] == line6pcm->volume_monitor)
+		return 0;
+
+	line6pcm->volume_monitor = ucontrol->value.integer.value[0];
+
+	if (line6pcm->volume_monitor > 0) {
+		err = line6_pcm_acquire(line6pcm, LINE6_STREAM_MONITOR, true);
+		if (err < 0) {
+			line6pcm->volume_monitor = 0;
+			line6_pcm_release(line6pcm, LINE6_STREAM_MONITOR);
+			return err;
+		}
+	} else {
+		line6_pcm_release(line6pcm, LINE6_STREAM_MONITOR);
+	}
+
+	return 1;
+}
+
+/* source info callback */
+static int snd_toneport_source_info(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_info *uinfo)
+{
+	const int size = ARRAY_SIZE(toneport_source_info);
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = size;
+
+	if (uinfo->value.enumerated.item >= size)
+		uinfo->value.enumerated.item = size - 1;
+
+	strscpy(uinfo->value.enumerated.name,
+	       toneport_source_info[uinfo->value.enumerated.item].name);
+
+	return 0;
+}
+
+/* source get callback */
+static int snd_toneport_source_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_toneport *toneport = line6_to_toneport(line6pcm->line6);
+
+	ucontrol->value.enumerated.item[0] = toneport->source;
+	return 0;
+}
+
+/* source put callback */
+static int snd_toneport_source_put(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_toneport *toneport = line6_to_toneport(line6pcm->line6);
+	unsigned int source;
+
+	source = ucontrol->value.enumerated.item[0];
+	if (source >= ARRAY_SIZE(toneport_source_info))
+		return -EINVAL;
+	if (source == toneport->source)
+		return 0;
+
+	toneport->source = source;
+	toneport_send_cmd(toneport->line6.usbdev,
+			  toneport_source_info[source].code, 0x0000);
+	return 1;
+}
+
+static void toneport_startup(struct usb_line6 *line6)
+{
+	line6_pcm_acquire(line6->line6pcm, LINE6_STREAM_MONITOR, true);
+}
+
+/* control definition */
+static const struct snd_kcontrol_new toneport_control_monitor = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Monitor Playback Volume",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = snd_toneport_monitor_info,
+	.get = snd_toneport_monitor_get,
+	.put = snd_toneport_monitor_put
+};
+
+/* source selector definition */
+static const struct snd_kcontrol_new toneport_control_source = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "PCM Capture Source",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = snd_toneport_source_info,
+	.get = snd_toneport_source_get,
+	.put = snd_toneport_source_put
+};
+
+/*
+	For the led on Guitarport.
+	Brightness goes from 0x00 to 0x26. Set a value above this to have led
+	blink.
+	(void cmd_0x02(byte red, byte green)
+*/
+
+static bool toneport_has_led(struct usb_line6_toneport *toneport)
+{
+	switch (toneport->type) {
+	case LINE6_GUITARPORT:
+	case LINE6_TONEPORT_GX:
+	/* add your device here if you are missing support for the LEDs */
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static const char * const toneport_led_colors[2] = { "red", "green" };
+static const int toneport_led_init_vals[2] = { 0x00, 0x26 };
+
+static void toneport_update_led(struct usb_line6_toneport *toneport)
+{
+	toneport_send_cmd(toneport->line6.usbdev,
+			  (toneport->leds[0].dev.brightness << 8) | 0x0002,
+			  toneport->leds[1].dev.brightness);
+}
+
+static void toneport_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
+{
+	struct toneport_led *leds =
+		container_of(led_cdev, struct toneport_led, dev);
+	toneport_update_led(leds->toneport);
+}
+
+static int toneport_init_leds(struct usb_line6_toneport *toneport)
+{
+	struct device *dev = &toneport->line6.usbdev->dev;
+	int i, err;
+
+	for (i = 0; i < 2; i++) {
+		struct toneport_led *led = &toneport->leds[i];
+		struct led_classdev *leddev = &led->dev;
+
+		led->toneport = toneport;
+		snprintf(led->name, sizeof(led->name), "%s::%s",
+			 dev_name(dev), toneport_led_colors[i]);
+		leddev->name = led->name;
+		leddev->brightness = toneport_led_init_vals[i];
+		leddev->max_brightness = 0x26;
+		leddev->brightness_set = toneport_led_brightness_set;
+		err = led_classdev_register(dev, leddev);
+		if (err)
+			return err;
+		led->registered = true;
+	}
+
+	return 0;
+}
+
+static void toneport_remove_leds(struct usb_line6_toneport *toneport)
+{
+	struct toneport_led *led;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		led = &toneport->leds[i];
+		if (!led->registered)
+			break;
+		led_classdev_unregister(&led->dev);
+		led->registered = false;
+	}
+}
+
+static bool toneport_has_source_select(struct usb_line6_toneport *toneport)
+{
+	switch (toneport->type) {
+	case LINE6_TONEPORT_UX1:
+	case LINE6_TONEPORT_UX2:
+	case LINE6_PODSTUDIO_UX1:
+	case LINE6_PODSTUDIO_UX2:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+/*
+	Setup Toneport device.
+*/
+static int toneport_setup(struct usb_line6_toneport *toneport)
+{
+	u32 *ticks;
+	struct usb_line6 *line6 = &toneport->line6;
+	struct usb_device *usbdev = line6->usbdev;
+
+	ticks = kmalloc_obj(*ticks);
+	if (!ticks)
+		return -ENOMEM;
+
+	/* sync time on device with host: */
+	/* note: 32-bit timestamps overflow in year 2106 */
+	*ticks = (u32)ktime_get_real_seconds();
+	line6_write_data(line6, 0x80c6, ticks, 4);
+	kfree(ticks);
+
+	/* enable device: */
+	toneport_send_cmd(usbdev, 0x0301, 0x0000);
+
+	/* initialize source select: */
+	if (toneport_has_source_select(toneport))
+		toneport_send_cmd(usbdev,
+				  toneport_source_info[toneport->source].code,
+				  0x0000);
+
+	if (toneport_has_led(toneport))
+		toneport_update_led(toneport);
+
+	schedule_delayed_work(&toneport->line6.startup_work,
+			      secs_to_jiffies(TONEPORT_PCM_DELAY));
+	return 0;
+}
+
+/*
+	Toneport device disconnected.
+*/
+static void line6_toneport_disconnect(struct usb_line6 *line6)
+{
+	struct usb_line6_toneport *toneport = line6_to_toneport(line6);
+
+	if (toneport_has_led(toneport))
+		toneport_remove_leds(toneport);
+}
+
+
+/*
+	 Try to init Toneport device.
+*/
+static int toneport_init(struct usb_line6 *line6,
+			 const struct usb_device_id *id)
+{
+	int err;
+	struct usb_line6_toneport *toneport = line6_to_toneport(line6);
+
+	toneport->type = id->driver_info;
+
+	line6->disconnect = line6_toneport_disconnect;
+	line6->startup = toneport_startup;
+
+	/* initialize PCM subsystem: */
+	err = line6_init_pcm(line6, &toneport_pcm_properties);
+	if (err < 0)
+		return err;
+
+	/* register monitor control: */
+	err = snd_ctl_add(line6->card,
+			  snd_ctl_new1(&toneport_control_monitor,
+				       line6->line6pcm));
+	if (err < 0)
+		return err;
+
+	/* register source select control: */
+	if (toneport_has_source_select(toneport)) {
+		err =
+		    snd_ctl_add(line6->card,
+				snd_ctl_new1(&toneport_control_source,
+					     line6->line6pcm));
+		if (err < 0)
+			return err;
+	}
+
+	line6_read_serial_number(line6, &toneport->serial_number);
+	line6_read_data(line6, 0x80c2, &toneport->firmware_version, 1);
+
+	if (toneport_has_led(toneport)) {
+		err = toneport_init_leds(toneport);
+		if (err < 0)
+			return err;
+	}
+
+	err = toneport_setup(toneport);
+	if (err)
+		return err;
+
+	/* register audio system: */
+	return snd_card_register(line6->card);
+}
+
+#ifdef CONFIG_PM
+/*
+	Resume Toneport device after reset.
+*/
+static int toneport_reset_resume(struct usb_interface *interface)
+{
+	int err;
+
+	err = toneport_setup(usb_get_intfdata(interface));
+	if (err)
+		return err;
+	return line6_resume(interface);
+}
+#endif
+
+#define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
+#define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
+
+/* table of devices that work with this driver */
+static const struct usb_device_id toneport_id_table[] = {
+	{ LINE6_DEVICE(0x4750),    .driver_info = LINE6_GUITARPORT },
+	{ LINE6_DEVICE(0x4153),    .driver_info = LINE6_PODSTUDIO_GX },
+	{ LINE6_DEVICE(0x4150),    .driver_info = LINE6_PODSTUDIO_UX1 },
+	{ LINE6_IF_NUM(0x4151, 0), .driver_info = LINE6_PODSTUDIO_UX2 },
+	{ LINE6_DEVICE(0x4147),    .driver_info = LINE6_TONEPORT_GX },
+	{ LINE6_DEVICE(0x4141),    .driver_info = LINE6_TONEPORT_UX1 },
+	{ LINE6_IF_NUM(0x4142, 0), .driver_info = LINE6_TONEPORT_UX2 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, toneport_id_table);
+
+static const struct line6_properties toneport_properties_table[] = {
+	[LINE6_GUITARPORT] = {
+		.id = "GuitarPort",
+		.name = "GuitarPort",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODSTUDIO_GX] = {
+		.id = "PODStudioGX",
+		.name = "POD Studio GX",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODSTUDIO_UX1] = {
+		.id = "PODStudioUX1",
+		.name = "POD Studio UX1",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODSTUDIO_UX2] = {
+		.id = "PODStudioUX2",
+		.name = "POD Studio UX2",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* defaults to 44.1kHz, 16-bit */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_TONEPORT_GX] = {
+		.id = "TonePortGX",
+		.name = "TonePort GX",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_TONEPORT_UX1] = {
+		.id = "TonePortUX1",
+		.name = "TonePort UX1",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_TONEPORT_UX2] = {
+		.id = "TonePortUX2",
+		.name = "TonePort UX2",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* defaults to 44.1kHz, 16-bit */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+};
+
+/*
+	Probe USB device.
+*/
+static int toneport_probe(struct usb_interface *interface,
+			  const struct usb_device_id *id)
+{
+	return line6_probe(interface, id, "Line6-TonePort",
+			   &toneport_properties_table[id->driver_info],
+			   toneport_init, sizeof(struct usb_line6_toneport));
+}
+
+static struct usb_driver toneport_driver = {
+	.name = KBUILD_MODNAME,
+	.probe = toneport_probe,
+	.disconnect = line6_disconnect,
+#ifdef CONFIG_PM
+	.suspend = line6_suspend,
+	.resume = line6_resume,
+	.reset_resume = toneport_reset_resume,
+#endif
+	.id_table = toneport_id_table,
+};
+
+module_usb_driver(toneport_driver);
+
+MODULE_DESCRIPTION("TonePort USB driver");
+MODULE_LICENSE("GPL");

linux-7.2.3/sound/usb/line6/variax.c

@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (line6@grabner-graz.at)
+ */
+
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+#include <linux/module.h>
+#include <sound/core.h>
+
+#include "driver.h"
+
+#define VARIAX_STARTUP_DELAY1 1000
+#define VARIAX_STARTUP_DELAY3 100
+#define VARIAX_STARTUP_DELAY4 100
+
+/*
+	Stages of Variax startup procedure
+*/
+enum {
+	VARIAX_STARTUP_VERSIONREQ,
+	VARIAX_STARTUP_ACTIVATE,
+	VARIAX_STARTUP_SETUP,
+};
+
+enum {
+	LINE6_PODXTLIVE_VARIAX,
+	LINE6_VARIAX
+};
+
+struct usb_line6_variax {
+	/* Generic Line 6 USB data */
+	struct usb_line6 line6;
+
+	/* Buffer for activation code */
+	unsigned char *buffer_activate;
+
+	/* Current progress in startup procedure */
+	int startup_progress;
+};
+
+#define line6_to_variax(x)	container_of(x, struct usb_line6_variax, line6)
+
+#define VARIAX_OFFSET_ACTIVATE 7
+
+/*
+	This message is sent by the device during initialization and identifies
+	the connected guitar version.
+*/
+static const char variax_init_version[] = {
+	0xf0, 0x7e, 0x7f, 0x06, 0x02, 0x00, 0x01, 0x0c,
+	0x07, 0x00, 0x00, 0x00
+};
+
+/*
+	This message is the last one sent by the device during initialization.
+*/
+static const char variax_init_done[] = {
+	0xf0, 0x00, 0x01, 0x0c, 0x07, 0x00, 0x6b
+};
+
+static const char variax_activate[] = {
+	0xf0, 0x00, 0x01, 0x0c, 0x07, 0x00, 0x2a, 0x01,
+	0xf7
+};
+
+static void variax_activate_async(struct usb_line6_variax *variax, int a)
+{
+	variax->buffer_activate[VARIAX_OFFSET_ACTIVATE] = a;
+	line6_send_raw_message_async(&variax->line6, variax->buffer_activate,
+				     sizeof(variax_activate));
+}
+
+/*
+	Variax startup procedure.
+	This is a sequence of functions with special requirements (e.g., must
+	not run immediately after initialization, must not run in interrupt
+	context). After the last one has finished, the device is ready to use.
+*/
+
+static void variax_startup(struct usb_line6 *line6)
+{
+	struct usb_line6_variax *variax = line6_to_variax(line6);
+
+	switch (variax->startup_progress) {
+	case VARIAX_STARTUP_VERSIONREQ:
+		/* repeat request until getting the response */
+		schedule_delayed_work(&line6->startup_work,
+				      msecs_to_jiffies(VARIAX_STARTUP_DELAY1));
+		/* request firmware version: */
+		line6_version_request_async(line6);
+		break;
+	case VARIAX_STARTUP_ACTIVATE:
+		/* activate device: */
+		variax_activate_async(variax, 1);
+		variax->startup_progress = VARIAX_STARTUP_SETUP;
+		schedule_delayed_work(&line6->startup_work,
+				      msecs_to_jiffies(VARIAX_STARTUP_DELAY4));
+		break;
+	case VARIAX_STARTUP_SETUP:
+		/* ALSA audio interface: */
+		snd_card_register(variax->line6.card);
+		break;
+	}
+}
+
+/*
+	Process a completely received message.
+*/
+static void line6_variax_process_message(struct usb_line6 *line6)
+{
+	struct usb_line6_variax *variax = line6_to_variax(line6);
+	const unsigned char *buf = variax->line6.buffer_message;
+
+	switch (buf[0]) {
+	case LINE6_RESET:
+		dev_info(variax->line6.ifcdev, "VARIAX reset\n");
+		break;
+
+	case LINE6_SYSEX_BEGIN:
+		if (memcmp(buf + 1, variax_init_version + 1,
+			   sizeof(variax_init_version) - 1) == 0) {
+			if (variax->startup_progress >= VARIAX_STARTUP_ACTIVATE)
+				break;
+			variax->startup_progress = VARIAX_STARTUP_ACTIVATE;
+			cancel_delayed_work(&line6->startup_work);
+			schedule_delayed_work(&line6->startup_work,
+					      msecs_to_jiffies(VARIAX_STARTUP_DELAY3));
+		} else if (memcmp(buf + 1, variax_init_done + 1,
+				  sizeof(variax_init_done) - 1) == 0) {
+			/* notify of complete initialization: */
+			if (variax->startup_progress >= VARIAX_STARTUP_SETUP)
+				break;
+			cancel_delayed_work(&line6->startup_work);
+			schedule_delayed_work(&line6->startup_work, 0);
+		}
+		break;
+	}
+}
+
+/*
+	Variax destructor.
+*/
+static void line6_variax_disconnect(struct usb_line6 *line6)
+{
+	struct usb_line6_variax *variax = line6_to_variax(line6);
+
+	kfree(variax->buffer_activate);
+}
+
+/*
+	 Try to init workbench device.
+*/
+static int variax_init(struct usb_line6 *line6,
+		       const struct usb_device_id *id)
+{
+	struct usb_line6_variax *variax = line6_to_variax(line6);
+
+	line6->process_message = line6_variax_process_message;
+	line6->disconnect = line6_variax_disconnect;
+	line6->startup = variax_startup;
+
+	/* initialize USB buffers: */
+	variax->buffer_activate = kmemdup(variax_activate,
+					  sizeof(variax_activate), GFP_KERNEL);
+
+	if (variax->buffer_activate == NULL)
+		return -ENOMEM;
+
+	/* initiate startup procedure: */
+	schedule_delayed_work(&line6->startup_work,
+			      msecs_to_jiffies(VARIAX_STARTUP_DELAY1));
+	return 0;
+}
+
+#define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
+#define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
+
+/* table of devices that work with this driver */
+static const struct usb_device_id variax_id_table[] = {
+	{ LINE6_IF_NUM(0x4650, 1), .driver_info = LINE6_PODXTLIVE_VARIAX },
+	{ LINE6_DEVICE(0x534d),    .driver_info = LINE6_VARIAX },
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, variax_id_table);
+
+static const struct line6_properties variax_properties_table[] = {
+	[LINE6_PODXTLIVE_VARIAX] = {
+		.id = "PODxtLive",
+		.name = "PODxt Live",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x86,
+		.ep_ctrl_w = 0x05,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_VARIAX] = {
+		.id = "Variax",
+		.name = "Variax Workbench",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_CONTROL_MIDI,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x82,
+		.ep_ctrl_w = 0x01,
+		/* no audio channel */
+	}
+};
+
+/*
+	Probe USB device.
+*/
+static int variax_probe(struct usb_interface *interface,
+			const struct usb_device_id *id)
+{
+	return line6_probe(interface, id, "Line6-Variax",
+			   &variax_properties_table[id->driver_info],
+			   variax_init, sizeof(struct usb_line6_variax));
+}
+
+static struct usb_driver variax_driver = {
+	.name = KBUILD_MODNAME,
+	.probe = variax_probe,
+	.disconnect = line6_disconnect,
+#ifdef CONFIG_PM
+	.suspend = line6_suspend,
+	.resume = line6_resume,
+	.reset_resume = line6_resume,
+#endif
+	.id_table = variax_id_table,
+};
+
+module_usb_driver(variax_driver);
+
+MODULE_DESCRIPTION("Variax Workbench USB driver");
+MODULE_LICENSE("GPL");