Resguardo inicial

linux-7.2.3/tools/testing/selftests/firmware/.gitignore

@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+fw_namespace

linux-7.2.3/tools/testing/selftests/firmware/Makefile

@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Makefile for firmware loading selftests
+CFLAGS = -Wall \
+         -O2
+
+TEST_PROGS := fw_run_tests.sh
+TEST_FILES := fw_fallback.sh fw_filesystem.sh fw_upload.sh fw_lib.sh
+TEST_GEN_FILES := fw_namespace
+
+include ../lib.mk

linux-7.2.3/tools/testing/selftests/firmware/config

@@ -0,0 +1,6 @@
+CONFIG_TEST_FIRMWARE=y
+CONFIG_FW_LOADER=y
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_FW_UPLOAD=y

linux-7.2.3/tools/testing/selftests/firmware/fw_fallback.sh

@@ -0,0 +1,283 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# This validates that the kernel will fall back to using the fallback mechanism
+# to load firmware it can't find on disk itself. We must request a firmware
+# that the kernel won't find, and any installed helper (e.g. udev) also
+# won't find so that we can do the load ourself manually.
+set -e
+
+TEST_REQS_FW_SYSFS_FALLBACK="yes"
+TEST_REQS_FW_SET_CUSTOM_PATH="no"
+TEST_DIR=$(dirname $0)
+source $TEST_DIR/fw_lib.sh
+
+check_mods
+check_setup
+verify_reqs
+setup_tmp_file
+
+trap "test_finish" EXIT
+
+load_fw()
+{
+	local name="$1"
+	local file="$2"
+
+	# This will block until our load (below) has finished.
+	echo -n "$name" >"$DIR"/trigger_request &
+
+	# Give kernel a chance to react.
+	local timeout=10
+	while [ ! -e "$DIR"/"$name"/loading ]; do
+		sleep 0.1
+		timeout=$(( $timeout - 1 ))
+		if [ "$timeout" -eq 0 ]; then
+			echo "$0: firmware interface never appeared" >&2
+			exit 1
+		fi
+	done
+
+	echo 1 >"$DIR"/"$name"/loading
+	cat "$file" >"$DIR"/"$name"/data
+	echo 0 >"$DIR"/"$name"/loading
+
+	# Wait for request to finish.
+	wait
+}
+
+load_fw_cancel()
+{
+	local name="$1"
+	local file="$2"
+
+	# This will block until our load (below) has finished.
+	echo -n "$name" >"$DIR"/trigger_request 2>/dev/null &
+
+	# Give kernel a chance to react.
+	local timeout=10
+	while [ ! -e "$DIR"/"$name"/loading ]; do
+		sleep 0.1
+		timeout=$(( $timeout - 1 ))
+		if [ "$timeout" -eq 0 ]; then
+			echo "$0: firmware interface never appeared" >&2
+			exit 1
+		fi
+	done
+
+	echo -1 >"$DIR"/"$name"/loading
+
+	# Wait for request to finish.
+	wait
+}
+
+load_fw_custom()
+{
+	if [ ! -e "$DIR"/trigger_custom_fallback ]; then
+		echo "$0: custom fallback trigger not present, ignoring test" >&2
+		exit $ksft_skip
+	fi
+
+	local name="$1"
+	local file="$2"
+
+	echo -n "$name" >"$DIR"/trigger_custom_fallback 2>/dev/null &
+
+	# Give kernel a chance to react.
+	local timeout=10
+	while [ ! -e "$DIR"/"$name"/loading ]; do
+		sleep 0.1
+		timeout=$(( $timeout - 1 ))
+		if [ "$timeout" -eq 0 ]; then
+			echo "$0: firmware interface never appeared" >&2
+			exit 1
+		fi
+	done
+
+	echo 1 >"$DIR"/"$name"/loading
+	cat "$file" >"$DIR"/"$name"/data
+	echo 0 >"$DIR"/"$name"/loading
+
+	# Wait for request to finish.
+	wait
+	return 0
+}
+
+
+load_fw_custom_cancel()
+{
+	if [ ! -e "$DIR"/trigger_custom_fallback ]; then
+		echo "$0: canceling custom fallback trigger not present, ignoring test" >&2
+		exit $ksft_skip
+	fi
+
+	local name="$1"
+	local file="$2"
+
+	echo -n "$name" >"$DIR"/trigger_custom_fallback 2>/dev/null &
+
+	# Give kernel a chance to react.
+	local timeout=10
+	while [ ! -e "$DIR"/"$name"/loading ]; do
+		sleep 0.1
+		timeout=$(( $timeout - 1 ))
+		if [ "$timeout" -eq 0 ]; then
+			echo "$0: firmware interface never appeared" >&2
+			exit 1
+		fi
+	done
+
+	echo -1 >"$DIR"/"$name"/loading
+
+	# Wait for request to finish.
+	wait
+	return 0
+}
+
+load_fw_fallback_with_child()
+{
+	local name="$1"
+	local file="$2"
+
+	# This is the value already set but we want to be explicit
+	echo 4 >/sys/class/firmware/timeout
+
+	sleep 1 &
+	SECONDS_BEFORE=$(date +%s)
+	echo -n "$name" >"$DIR"/trigger_request 2>/dev/null
+	SECONDS_AFTER=$(date +%s)
+	SECONDS_DELTA=$(($SECONDS_AFTER - $SECONDS_BEFORE))
+	if [ "$SECONDS_DELTA" -lt 4 ]; then
+		RET=1
+	else
+		RET=0
+	fi
+	wait
+	return $RET
+}
+
+test_syfs_timeout()
+{
+	DEVPATH="$DIR"/"nope-$NAME"/loading
+
+	# Test failure when doing nothing (timeout works).
+	echo -n 2 >/sys/class/firmware/timeout
+	echo -n "nope-$NAME" >"$DIR"/trigger_request 2>/dev/null &
+
+	# Give the kernel some time to load the loading file, must be less
+	# than the timeout above.
+	sleep 1
+	if [ ! -f $DEVPATH ]; then
+		echo "$0: fallback mechanism immediately cancelled"
+		echo ""
+		echo "The file never appeared: $DEVPATH"
+		echo ""
+		echo "This might be a distribution udev rule setup by your distribution"
+		echo "to immediately cancel all fallback requests, this must be"
+		echo "removed before running these tests. To confirm look for"
+		echo "a firmware rule like /lib/udev/rules.d/50-firmware.rules"
+		echo "and see if you have something like this:"
+		echo ""
+		echo "SUBSYSTEM==\"firmware\", ACTION==\"add\", ATTR{loading}=\"-1\""
+		echo ""
+		echo "If you do remove this file or comment out this line before"
+		echo "proceeding with these tests."
+		exit 1
+	fi
+
+	if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+		echo "$0: firmware was not expected to match" >&2
+		exit 1
+	else
+		echo "$0: timeout works"
+	fi
+}
+
+run_sysfs_main_tests()
+{
+	test_syfs_timeout
+	# Put timeout high enough for us to do work but not so long that failures
+	# slow down this test too much.
+	echo 4 >/sys/class/firmware/timeout
+
+	# Load this script instead of the desired firmware.
+	load_fw "$NAME" "$0"
+	if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+		echo "$0: firmware was not expected to match" >&2
+		exit 1
+	else
+		echo "$0: firmware comparison works"
+	fi
+
+	# Do a proper load, which should work correctly.
+	load_fw "$NAME" "$FW"
+	if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
+		echo "$0: firmware was not loaded" >&2
+		exit 1
+	else
+		echo "$0: fallback mechanism works"
+	fi
+
+	load_fw_cancel "nope-$NAME" "$FW"
+	if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+		echo "$0: firmware was expected to be cancelled" >&2
+		exit 1
+	else
+		echo "$0: cancelling fallback mechanism works"
+	fi
+
+	set +e
+	load_fw_fallback_with_child "nope-signal-$NAME" "$FW"
+	if [ "$?" -eq 0 ]; then
+		echo "$0: SIGCHLD on sync ignored as expected" >&2
+	else
+		echo "$0: error - sync firmware request cancelled due to SIGCHLD" >&2
+		exit 1
+	fi
+	set -e
+}
+
+run_sysfs_custom_load_tests()
+{
+	RANDOM_FILE_PATH=$(setup_random_file)
+	RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
+	if load_fw_custom "$RANDOM_FILE" "$RANDOM_FILE_PATH" ; then
+		if ! diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then
+			echo "$0: firmware was not loaded" >&2
+			exit 1
+		else
+			echo "$0: custom fallback loading mechanism works"
+		fi
+	fi
+
+	RANDOM_FILE_PATH=$(setup_random_file)
+	RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
+	if load_fw_custom "$RANDOM_FILE" "$RANDOM_FILE_PATH" ; then
+		if ! diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then
+			echo "$0: firmware was not loaded" >&2
+			exit 1
+		else
+			echo "$0: custom fallback loading mechanism works"
+		fi
+	fi
+
+	RANDOM_FILE_REAL="$RANDOM_FILE_PATH"
+	FAKE_RANDOM_FILE_PATH=$(setup_random_file_fake)
+	FAKE_RANDOM_FILE="$(basename $FAKE_RANDOM_FILE_PATH)"
+
+	if load_fw_custom_cancel "$FAKE_RANDOM_FILE" "$RANDOM_FILE_REAL" ; then
+		if diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then
+			echo "$0: firmware was expected to be cancelled" >&2
+			exit 1
+		else
+			echo "$0: cancelling custom fallback mechanism works"
+		fi
+	fi
+}
+
+if [ "$HAS_FW_LOADER_USER_HELPER_FALLBACK" = "yes" ]; then
+	run_sysfs_main_tests
+fi
+
+run_sysfs_custom_load_tests
+
+exit 0

linux-7.2.3/tools/testing/selftests/firmware/fw_filesystem.sh

@@ -0,0 +1,546 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# This validates that the kernel will load firmware out of its list of
+# firmware locations on disk. Since the user helper does similar work,
+# we reset the custom load directory to a location the user helper doesn't
+# know so we can be sure we're not accidentally testing the user helper.
+set -e
+
+TEST_REQS_FW_SYSFS_FALLBACK="no"
+TEST_REQS_FW_SET_CUSTOM_PATH="yes"
+TEST_DIR=$(dirname $0)
+source $TEST_DIR/fw_lib.sh
+
+RUN_XZ="xz -C crc32 --lzma2=dict=2MiB"
+RUN_ZSTD="zstd -q"
+
+check_mods
+check_setup
+verify_reqs
+setup_tmp_file
+
+trap "test_finish" EXIT
+
+if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
+	# Turn down the timeout so failures don't take so long.
+	echo 1 >/sys/class/firmware/timeout
+fi
+
+if printf '\000' >"$DIR"/trigger_request 2> /dev/null; then
+	echo "$0: empty filename should not succeed" >&2
+	exit 1
+fi
+
+if [ ! -e "$DIR"/trigger_async_request ]; then
+	echo "$0: empty filename: async trigger not present, ignoring test" >&2
+	exit $ksft_skip
+else
+	if printf '\000' >"$DIR"/trigger_async_request 2> /dev/null; then
+		echo "$0: empty filename should not succeed (async)" >&2
+		exit 1
+	fi
+fi
+
+# Request a firmware that doesn't exist, it should fail.
+if echo -n "nope-$NAME" >"$DIR"/trigger_request 2> /dev/null; then
+	echo "$0: firmware shouldn't have loaded" >&2
+	exit 1
+fi
+if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+	echo "$0: firmware was not expected to match" >&2
+	exit 1
+else
+	if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
+		echo "$0: timeout works"
+	fi
+fi
+
+# This should succeed via kernel load or will fail after 1 second after
+# being handed over to the user helper, which won't find the fw either.
+if ! echo -n "$NAME" >"$DIR"/trigger_request ; then
+	echo "$0: could not trigger request" >&2
+	exit 1
+fi
+
+# Verify the contents are what we expect.
+if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
+	echo "$0: firmware was not loaded" >&2
+	exit 1
+else
+	echo "$0: filesystem loading works"
+fi
+
+# Try the asynchronous version too
+if [ ! -e "$DIR"/trigger_async_request ]; then
+	echo "$0: firmware loading: async trigger not present, ignoring test" >&2
+	exit $ksft_skip
+else
+	if ! echo -n "$NAME" >"$DIR"/trigger_async_request ; then
+		echo "$0: could not trigger async request" >&2
+		exit 1
+	fi
+
+	# Verify the contents are what we expect.
+	if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
+		echo "$0: firmware was not loaded (async)" >&2
+		exit 1
+	else
+		echo "$0: async filesystem loading works"
+	fi
+fi
+
+# Try platform (EFI embedded fw) loading too
+if [ ! -e "$DIR"/trigger_request_platform ]; then
+	echo "$0: firmware loading: platform trigger not present, ignoring test" >&2
+else
+	if printf '\000' >"$DIR"/trigger_request_platform 2> /dev/null; then
+		echo "$0: empty filename should not succeed (platform)" >&2
+		exit 1
+	fi
+
+	# Note we echo a non-existing name, since files on the file-system
+	# are preferred over firmware embedded inside the platform's firmware
+	# The test adds a fake entry with the requested name to the platform's
+	# fw list, so the name does not matter as long as it does not exist
+	if ! echo -n "nope-$NAME" >"$DIR"/trigger_request_platform ; then
+		echo "$0: could not trigger request platform" >&2
+		exit 1
+	fi
+
+	# The test verifies itself that the loaded firmware contents matches
+	# the contents for the fake platform fw entry it added.
+	echo "$0: platform loading works"
+fi
+
+### Batched requests tests
+test_config_present()
+{
+	if [ ! -f $DIR/reset ]; then
+		echo "Configuration triggers not present, ignoring test"
+		exit $ksft_skip
+	fi
+}
+
+# Defaults :
+#
+# send_uevent: 1
+# sync_direct: 0
+# name: test-firmware.bin
+# num_requests: 4
+config_reset()
+{
+	echo 1 >  $DIR/reset
+}
+
+release_all_firmware()
+{
+	echo 1 >  $DIR/release_all_firmware
+}
+
+config_set_name()
+{
+	echo -n $1 >  $DIR/config_name
+}
+
+config_set_into_buf()
+{
+	echo 1 >  $DIR/config_into_buf
+}
+
+config_unset_into_buf()
+{
+	echo 0 >  $DIR/config_into_buf
+}
+
+config_set_buf_size()
+{
+	echo $1 >  $DIR/config_buf_size
+}
+
+config_set_file_offset()
+{
+	echo $1 >  $DIR/config_file_offset
+}
+
+config_set_partial()
+{
+	echo 1 >  $DIR/config_partial
+}
+
+config_unset_partial()
+{
+	echo 0 >  $DIR/config_partial
+}
+
+config_set_sync_direct()
+{
+	echo 1 >  $DIR/config_sync_direct
+}
+
+config_unset_sync_direct()
+{
+	echo 0 >  $DIR/config_sync_direct
+}
+
+config_set_uevent()
+{
+	echo 1 >  $DIR/config_send_uevent
+}
+
+config_unset_uevent()
+{
+	echo 0 >  $DIR/config_send_uevent
+}
+
+config_trigger_sync()
+{
+	echo -n 1 > $DIR/trigger_batched_requests 2>/dev/null
+}
+
+config_trigger_async()
+{
+	echo -n 1 > $DIR/trigger_batched_requests_async 2> /dev/null
+}
+
+config_set_read_fw_idx()
+{
+	echo -n $1 > $DIR/config_read_fw_idx 2> /dev/null
+}
+
+read_firmwares()
+{
+	if [ "$(cat $DIR/config_into_buf)" == "1" ]; then
+		fwfile="$FW_INTO_BUF"
+	else
+		fwfile="$FW"
+	fi
+	if [ "$1" = "componly" ]; then
+		fwfile="${fwfile}-orig"
+	fi
+	for i in $(seq 0 3); do
+		config_set_read_fw_idx $i
+		# Verify the contents are what we expect.
+		# -Z required for now -- check for yourself, md5sum
+		# on $FW and DIR/read_firmware will yield the same. Even
+		# cmp agrees, so something is off.
+		if ! diff -q -Z "$fwfile" $DIR/read_firmware 2>/dev/null ; then
+			echo "request #$i: firmware was not loaded" >&2
+			exit 1
+		fi
+	done
+}
+
+read_partial_firmwares()
+{
+	if [ "$(cat $DIR/config_into_buf)" == "1" ]; then
+		fwfile="${FW_INTO_BUF}"
+	else
+		fwfile="${FW}"
+	fi
+
+	if [ "$1" = "componly" ]; then
+		fwfile="${fwfile}-orig"
+	fi
+
+	# Strip fwfile down to match partial offset and length
+	partial_data="$(cat $fwfile)"
+	partial_data="${partial_data:$2:$3}"
+
+	for i in $(seq 0 3); do
+		config_set_read_fw_idx $i
+
+		read_firmware="$(cat $DIR/read_firmware)"
+
+		# Verify the contents are what we expect.
+		if [ $read_firmware != $partial_data ]; then
+			echo "request #$i: partial firmware was not loaded" >&2
+			exit 1
+		fi
+	done
+}
+
+read_firmwares_expect_nofile()
+{
+	for i in $(seq 0 3); do
+		config_set_read_fw_idx $i
+		# Ensures contents differ
+		if diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then
+			echo "request $i: file was not expected to match" >&2
+			exit 1
+		fi
+	done
+}
+
+test_batched_request_firmware_nofile()
+{
+	echo -n "Batched request_firmware() nofile try #$1: "
+	config_reset
+	config_set_name nope-test-firmware.bin
+	config_trigger_sync
+	read_firmwares_expect_nofile
+	release_all_firmware
+	echo "OK"
+}
+
+test_batched_request_firmware_into_buf_nofile()
+{
+	echo -n "Batched request_firmware_into_buf() nofile try #$1: "
+	config_reset
+	config_set_name nope-test-firmware.bin
+	config_set_into_buf
+	config_trigger_sync
+	read_firmwares_expect_nofile
+	release_all_firmware
+	echo "OK"
+}
+
+test_request_partial_firmware_into_buf_nofile()
+{
+	echo -n "Test request_partial_firmware_into_buf() off=$1 size=$2 nofile: "
+	config_reset
+	config_set_name nope-test-firmware.bin
+	config_set_into_buf
+	config_set_partial
+	config_set_buf_size $2
+	config_set_file_offset $1
+	config_trigger_sync
+	read_firmwares_expect_nofile
+	release_all_firmware
+	echo "OK"
+}
+
+test_batched_request_firmware_direct_nofile()
+{
+	echo -n "Batched request_firmware_direct() nofile try #$1: "
+	config_reset
+	config_set_name nope-test-firmware.bin
+	config_set_sync_direct
+	config_trigger_sync
+	release_all_firmware
+	echo "OK"
+}
+
+test_request_firmware_nowait_uevent_nofile()
+{
+	echo -n "Batched request_firmware_nowait(uevent=true) nofile try #$1: "
+	config_reset
+	config_set_name nope-test-firmware.bin
+	config_trigger_async
+	release_all_firmware
+	echo "OK"
+}
+
+test_wait_and_cancel_custom_load()
+{
+	if [ "$HAS_FW_LOADER_USER_HELPER" != "yes" ]; then
+		return
+	fi
+	local timeout=10
+	name=$1
+	while [ ! -e "$DIR"/"$name"/loading ]; do
+		sleep 0.1
+		timeout=$(( $timeout - 1 ))
+		if [ "$timeout" -eq 0 ]; then
+			echo "firmware interface never appeared:" >&2
+			echo "$DIR/$name/loading" >&2
+			exit 1
+		fi
+	done
+	echo -1 >"$DIR"/"$name"/loading
+}
+
+test_request_firmware_nowait_custom_nofile()
+{
+	echo -n "Batched request_firmware_nowait(uevent=false) nofile try #$1: "
+	config_reset
+	config_unset_uevent
+	RANDOM_FILE_PATH=$(setup_random_file_fake)
+	RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
+	config_set_name $RANDOM_FILE
+	config_trigger_async &
+	test_wait_and_cancel_custom_load $RANDOM_FILE
+	wait
+	release_all_firmware
+	echo "OK"
+}
+
+test_batched_request_firmware()
+{
+	echo -n "Batched request_firmware() $2 try #$1: "
+	config_reset
+	config_trigger_sync
+	read_firmwares $2
+	release_all_firmware
+	echo "OK"
+}
+
+test_batched_request_firmware_into_buf()
+{
+	echo -n "Batched request_firmware_into_buf() $2 try #$1: "
+	config_reset
+	config_set_name $TEST_FIRMWARE_INTO_BUF_FILENAME
+	config_set_into_buf
+	config_trigger_sync
+	read_firmwares $2
+	release_all_firmware
+	echo "OK"
+}
+
+test_batched_request_firmware_direct()
+{
+	echo -n "Batched request_firmware_direct() $2 try #$1: "
+	config_reset
+	config_set_sync_direct
+	config_trigger_sync
+	release_all_firmware
+	echo "OK"
+}
+
+test_request_firmware_nowait_uevent()
+{
+	echo -n "Batched request_firmware_nowait(uevent=true) $2 try #$1: "
+	config_reset
+	config_trigger_async
+	release_all_firmware
+	echo "OK"
+}
+
+test_request_firmware_nowait_custom()
+{
+	echo -n "Batched request_firmware_nowait(uevent=false) $2 try #$1: "
+	config_reset
+	config_unset_uevent
+	RANDOM_FILE_PATH=$(setup_random_file)
+	RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
+	if [ -n "$2" -a "$2" != "normal" ]; then
+		compress_"$2"_"$COMPRESS_FORMAT" $RANDOM_FILE_PATH
+	fi
+	config_set_name $RANDOM_FILE
+	config_trigger_async
+	release_all_firmware
+	echo "OK"
+}
+
+test_request_partial_firmware_into_buf()
+{
+	echo -n "Test request_partial_firmware_into_buf() off=$1 size=$2: "
+	config_reset
+	config_set_name $TEST_FIRMWARE_INTO_BUF_FILENAME
+	config_set_into_buf
+	config_set_partial
+	config_set_buf_size $2
+	config_set_file_offset $1
+	config_trigger_sync
+	read_partial_firmwares normal $1 $2
+	release_all_firmware
+	echo "OK"
+}
+
+do_tests ()
+{
+	mode="$1"
+	suffix="$2"
+
+	for i in $(seq 1 5); do
+		test_batched_request_firmware$suffix $i $mode
+	done
+
+	for i in $(seq 1 5); do
+		test_batched_request_firmware_into_buf$suffix $i $mode
+	done
+
+	for i in $(seq 1 5); do
+		test_batched_request_firmware_direct$suffix $i $mode
+	done
+
+	for i in $(seq 1 5); do
+		test_request_firmware_nowait_uevent$suffix $i $mode
+	done
+
+	for i in $(seq 1 5); do
+		test_request_firmware_nowait_custom$suffix $i $mode
+	done
+}
+
+# Only continue if batched request triggers are present on the
+# test-firmware driver
+test_config_present
+
+# test with the file present
+echo
+echo "Testing with the file present..."
+do_tests normal
+
+# Partial loads cannot use fallback, so do not repeat tests.
+test_request_partial_firmware_into_buf 0 10
+test_request_partial_firmware_into_buf 0 5
+test_request_partial_firmware_into_buf 1 6
+test_request_partial_firmware_into_buf 2 10
+
+# Test for file not found, errors are expected, the failure would be
+# a hung task, which would require a hard reset.
+echo
+echo "Testing with the file missing..."
+do_tests nofile _nofile
+
+# Partial loads cannot use fallback, so do not repeat tests.
+test_request_partial_firmware_into_buf_nofile 0 10
+test_request_partial_firmware_into_buf_nofile 0 5
+test_request_partial_firmware_into_buf_nofile 1 6
+test_request_partial_firmware_into_buf_nofile 2 10
+
+test_request_firmware_compressed ()
+{
+	export COMPRESS_FORMAT="$1"
+
+	# test with both files present
+	compress_both_"$COMPRESS_FORMAT" $FW
+	compress_both_"$COMPRESS_FORMAT" $FW_INTO_BUF
+
+	config_set_name $NAME
+	echo
+	echo "Testing with both plain and $COMPRESS_FORMAT files present..."
+	do_tests both
+
+	# test with only compressed file present
+	mv "$FW" "${FW}-orig"
+	mv "$FW_INTO_BUF" "${FW_INTO_BUF}-orig"
+
+	config_set_name $NAME
+	echo
+	echo "Testing with only $COMPRESS_FORMAT file present..."
+	do_tests componly
+
+	mv "${FW}-orig" "$FW"
+	mv "${FW_INTO_BUF}-orig" "$FW_INTO_BUF"
+}
+
+compress_both_XZ ()
+{
+	$RUN_XZ -k "$@"
+}
+
+compress_componly_XZ ()
+{
+	$RUN_XZ "$@"
+}
+
+compress_both_ZSTD ()
+{
+	$RUN_ZSTD -k "$@"
+}
+
+compress_componly_ZSTD ()
+{
+	$RUN_ZSTD --rm "$@"
+}
+
+if test "$HAS_FW_LOADER_COMPRESS_XZ" = "yes"; then
+	test_request_firmware_compressed XZ
+fi
+
+if test "$HAS_FW_LOADER_COMPRESS_ZSTD" = "yes"; then
+	test_request_firmware_compressed ZSTD
+fi
+
+exit 0

linux-7.2.3/tools/testing/selftests/firmware/fw_lib.sh

@@ -0,0 +1,236 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Library of helpers for test scripts.
+set -e
+
+DIR=/sys/devices/virtual/misc/test_firmware
+
+PROC_CONFIG="/proc/config.gz"
+TEST_DIR=$(dirname $0)
+
+# We need to load a different file to test request_firmware_into_buf
+# I believe the issue is firmware loaded cached vs. non-cached
+# with same filename is bungled.
+# To reproduce rename this to test-firmware.bin
+TEST_FIRMWARE_INTO_BUF_FILENAME=test-firmware-into-buf.bin
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+print_reqs_exit()
+{
+	echo "You must have the following enabled in your kernel:" >&2
+	cat $TEST_DIR/config >&2
+	exit $ksft_skip
+}
+
+test_modprobe()
+{
+	if [ ! -d $DIR ]; then
+		print_reqs_exit
+	fi
+}
+
+check_mods()
+{
+	local uid=$(id -u)
+	if [ $uid -ne 0 ]; then
+		echo "skip all tests: must be run as root" >&2
+		exit $ksft_skip
+	fi
+
+	trap "test_modprobe" EXIT
+	if [ ! -d $DIR ]; then
+		modprobe test_firmware
+	fi
+	if [ ! -f $PROC_CONFIG ]; then
+		if modprobe configs 2>/dev/null; then
+			echo "Loaded configs module"
+			if [ ! -f $PROC_CONFIG ]; then
+				echo "You must have the following enabled in your kernel:" >&2
+				cat $TEST_DIR/config >&2
+				echo "Resorting to old heuristics" >&2
+			fi
+		else
+			echo "Failed to load configs module, using old heuristics" >&2
+		fi
+	fi
+}
+
+check_setup()
+{
+	HAS_FW_LOADER_USER_HELPER="$(kconfig_has CONFIG_FW_LOADER_USER_HELPER=y)"
+	HAS_FW_LOADER_USER_HELPER_FALLBACK="$(kconfig_has CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y)"
+	HAS_FW_LOADER_COMPRESS_XZ="$(kconfig_has CONFIG_FW_LOADER_COMPRESS_XZ=y)"
+	HAS_FW_LOADER_COMPRESS_ZSTD="$(kconfig_has CONFIG_FW_LOADER_COMPRESS_ZSTD=y)"
+	HAS_FW_UPLOAD="$(kconfig_has CONFIG_FW_UPLOAD=y)"
+	PROC_FW_IGNORE_SYSFS_FALLBACK="0"
+	PROC_FW_FORCE_SYSFS_FALLBACK="0"
+
+	if [ -z $PROC_SYS_DIR ]; then
+		PROC_SYS_DIR="/proc/sys/kernel"
+	fi
+
+	FW_PROC="${PROC_SYS_DIR}/firmware_config"
+	FW_FORCE_SYSFS_FALLBACK="$FW_PROC/force_sysfs_fallback"
+	FW_IGNORE_SYSFS_FALLBACK="$FW_PROC/ignore_sysfs_fallback"
+
+	if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then
+		PROC_FW_FORCE_SYSFS_FALLBACK="$(cat $FW_FORCE_SYSFS_FALLBACK)"
+	fi
+
+	if [ -f $FW_IGNORE_SYSFS_FALLBACK ]; then
+		PROC_FW_IGNORE_SYSFS_FALLBACK="$(cat $FW_IGNORE_SYSFS_FALLBACK)"
+	fi
+
+	if [ "$PROC_FW_FORCE_SYSFS_FALLBACK" = "1" ]; then
+		HAS_FW_LOADER_USER_HELPER="yes"
+		HAS_FW_LOADER_USER_HELPER_FALLBACK="yes"
+	fi
+
+	if [ "$PROC_FW_IGNORE_SYSFS_FALLBACK" = "1" ]; then
+		HAS_FW_LOADER_USER_HELPER_FALLBACK="no"
+		HAS_FW_LOADER_USER_HELPER="no"
+	fi
+
+	if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
+	       OLD_TIMEOUT="$(cat /sys/class/firmware/timeout)"
+	fi
+
+	OLD_FWPATH="$(cat /sys/module/firmware_class/parameters/path)"
+
+	if [ "$HAS_FW_LOADER_COMPRESS_XZ" = "yes" ]; then
+		if ! which xz 2> /dev/null > /dev/null; then
+			HAS_FW_LOADER_COMPRESS_XZ=""
+		fi
+	fi
+	if [ "$HAS_FW_LOADER_COMPRESS_ZSTD" = "yes" ]; then
+		if ! which zstd 2> /dev/null > /dev/null; then
+			HAS_FW_LOADER_COMPRESS_ZSTD=""
+		fi
+	fi
+}
+
+verify_reqs()
+{
+	if [ "$TEST_REQS_FW_SYSFS_FALLBACK" = "yes" ]; then
+		if [ ! "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
+			echo "usermode helper disabled so ignoring test"
+			exit 0
+		fi
+	fi
+	if [ "$TEST_REQS_FW_UPLOAD" = "yes" ]; then
+		if [ ! "$HAS_FW_UPLOAD" = "yes" ]; then
+			echo "firmware upload disabled so ignoring test"
+			exit 0
+		fi
+	fi
+}
+
+setup_tmp_file()
+{
+	FWPATH=$(mktemp -d)
+	FW="$FWPATH/test-firmware.bin"
+	echo "ABCD0123" >"$FW"
+	FW_INTO_BUF="$FWPATH/$TEST_FIRMWARE_INTO_BUF_FILENAME"
+	echo "EFGH4567" >"$FW_INTO_BUF"
+	NAME=$(basename "$FW")
+	if [ "$TEST_REQS_FW_SET_CUSTOM_PATH" = "yes" ]; then
+		echo -n "$FWPATH" >/sys/module/firmware_class/parameters/path
+	fi
+}
+
+__setup_random_file()
+{
+	RANDOM_FILE_PATH="$(mktemp -p $FWPATH)"
+	# mktemp says dry-run -n is unsafe, so...
+	if [[ "$1" = "fake" ]]; then
+		rm -rf $RANDOM_FILE_PATH
+		sync
+	else
+		echo "ABCD0123" >"$RANDOM_FILE_PATH"
+	fi
+	echo $RANDOM_FILE_PATH
+}
+
+setup_random_file()
+{
+	echo $(__setup_random_file)
+}
+
+setup_random_file_fake()
+{
+	echo $(__setup_random_file fake)
+}
+
+proc_set_force_sysfs_fallback()
+{
+	if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then
+		echo -n $1 > $FW_FORCE_SYSFS_FALLBACK
+		check_setup
+	fi
+}
+
+proc_set_ignore_sysfs_fallback()
+{
+	if [ -f $FW_IGNORE_SYSFS_FALLBACK ]; then
+		echo -n $1 > $FW_IGNORE_SYSFS_FALLBACK
+		check_setup
+	fi
+}
+
+proc_restore_defaults()
+{
+	proc_set_force_sysfs_fallback 0
+	proc_set_ignore_sysfs_fallback 0
+}
+
+test_finish()
+{
+	if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
+		echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
+	fi
+	if [ "$TEST_REQS_FW_SET_CUSTOM_PATH" = "yes" ]; then
+		if [ "$OLD_FWPATH" = "" ]; then
+			# A zero-length write won't work; write a null byte
+			printf '\000' >/sys/module/firmware_class/parameters/path
+		else
+			echo -n "$OLD_FWPATH" >/sys/module/firmware_class/parameters/path
+		fi
+	fi
+	if [ -f $FW ]; then
+		rm -f "$FW"
+	fi
+	if [ -f $FW_INTO_BUF ]; then
+		rm -f "$FW_INTO_BUF"
+	fi
+	if [ -d $FWPATH ]; then
+		rm -rf "$FWPATH"
+	fi
+	proc_restore_defaults
+}
+
+kconfig_has()
+{
+	if [ -f $PROC_CONFIG ]; then
+		if zgrep -q $1 $PROC_CONFIG 2>/dev/null; then
+			echo "yes"
+		else
+			echo "no"
+		fi
+	else
+		# We currently don't have easy heuristics to infer this
+		# so best we can do is just try to use the kernel assuming
+		# you had enabled it. This matches the old behaviour.
+		if [ "$1" = "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y" ]; then
+			echo "yes"
+		elif [ "$1" = "CONFIG_FW_LOADER_USER_HELPER=y" ]; then
+			if [ -d /sys/class/firmware/ ]; then
+				echo yes
+			else
+				echo no
+			fi
+		fi
+	fi
+}

linux-7.2.3/tools/testing/selftests/firmware/fw_namespace.c

@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Test triggering of loading of firmware from different mount
+ * namespaces. Expect firmware to be always loaded from the mount
+ * namespace of PID 1. */
+#define _GNU_SOURCE
+#include <errno.h>
+#include <fcntl.h>
+#include <sched.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mount.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+static char *fw_path = NULL;
+
+static void die(char *fmt, ...)
+{
+	va_list ap;
+
+	va_start(ap, fmt);
+	vfprintf(stderr, fmt, ap);
+	va_end(ap);
+	if (fw_path)
+		unlink(fw_path);
+	umount("/lib/firmware");
+	exit(EXIT_FAILURE);
+}
+
+static void trigger_fw(const char *fw_name, const char *sys_path)
+{
+	int fd;
+
+	fd = open(sys_path, O_WRONLY);
+	if (fd < 0)
+		die("open failed: %s\n",
+		    strerror(errno));
+	if (write(fd, fw_name, strlen(fw_name)) != strlen(fw_name))
+		exit(EXIT_FAILURE);
+	close(fd);
+}
+
+static void setup_fw(const char *fw_path)
+{
+	int fd;
+	const char fw[] = "ABCD0123";
+
+	fd = open(fw_path, O_WRONLY | O_CREAT, 0600);
+	if (fd < 0)
+		die("open failed: %s\n",
+		    strerror(errno));
+	if (write(fd, fw, sizeof(fw) -1) != sizeof(fw) -1)
+		die("write failed: %s\n",
+		    strerror(errno));
+	close(fd);
+}
+
+static bool test_fw_in_ns(const char *fw_name, const char *sys_path, bool block_fw_in_parent_ns)
+{
+	pid_t child;
+
+	if (block_fw_in_parent_ns)
+		if (mount("test", "/lib/firmware", "tmpfs", MS_RDONLY, NULL) == -1)
+			die("blocking firmware in parent ns failed\n");
+
+	child = fork();
+	if (child == -1) {
+		die("fork failed: %s\n",
+			strerror(errno));
+	}
+	if (child != 0) { /* parent */
+		pid_t pid;
+		int status;
+
+		pid = waitpid(child, &status, 0);
+		if (pid == -1) {
+			die("waitpid failed: %s\n",
+				strerror(errno));
+		}
+		if (pid != child) {
+			die("waited for %d got %d\n",
+				child, pid);
+		}
+		if (!WIFEXITED(status)) {
+			die("child did not terminate cleanly\n");
+		}
+		if (block_fw_in_parent_ns)
+			umount("/lib/firmware");
+		return WEXITSTATUS(status) == EXIT_SUCCESS;
+	}
+
+	if (unshare(CLONE_NEWNS) != 0) {
+		die("unshare(CLONE_NEWNS) failed: %s\n",
+			strerror(errno));
+	}
+	if (mount(NULL, "/", NULL, MS_SLAVE|MS_REC, NULL) == -1)
+		die("remount root in child ns failed\n");
+
+	if (!block_fw_in_parent_ns) {
+		if (mount("test", "/lib/firmware", "tmpfs", MS_RDONLY, NULL) == -1)
+			die("blocking firmware in child ns failed\n");
+	} else
+		umount("/lib/firmware");
+
+	trigger_fw(fw_name, sys_path);
+
+	exit(EXIT_SUCCESS);
+}
+
+int main(int argc, char **argv)
+{
+	const char *fw_name = "test-firmware.bin";
+	char *sys_path;
+	if (argc != 2)
+		die("usage: %s sys_path\n", argv[0]);
+
+	/* Mount tmpfs to /lib/firmware so we don't have to assume
+	   that it is writable for us.*/
+	if (mount("test", "/lib/firmware", "tmpfs", 0, NULL) == -1)
+		die("mounting tmpfs to /lib/firmware failed\n");
+
+	sys_path = argv[1];
+	if (asprintf(&fw_path, "/lib/firmware/%s", fw_name) < 0)
+		die("error: failed to build full fw_path\n");
+
+	setup_fw(fw_path);
+
+	setvbuf(stdout, NULL, _IONBF, 0);
+	/* Positive case: firmware in PID1 mount namespace */
+	printf("Testing with firmware in parent namespace (assumed to be same file system as PID1)\n");
+	if (!test_fw_in_ns(fw_name, sys_path, false))
+		die("error: failed to access firmware\n");
+
+	/* Negative case: firmware in child mount namespace, expected to fail */
+	printf("Testing with firmware in child namespace\n");
+	if (test_fw_in_ns(fw_name, sys_path, true))
+		die("error: firmware access did not fail\n");
+
+	unlink(fw_path);
+	free(fw_path);
+	umount("/lib/firmware");
+	exit(EXIT_SUCCESS);
+}

linux-7.2.3/tools/testing/selftests/firmware/fw_run_tests.sh

@@ -0,0 +1,79 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This runs all known tests across all known possible configurations we could
+# emulate in one run.
+
+set -e
+
+TEST_DIR=$(dirname $0)
+source $TEST_DIR/fw_lib.sh
+
+export HAS_FW_LOADER_USER_HELPER=""
+export HAS_FW_LOADER_USER_HELPER_FALLBACK=""
+export HAS_FW_LOADER_COMPRESS=""
+
+run_tests()
+{
+	proc_set_force_sysfs_fallback $1
+	proc_set_ignore_sysfs_fallback $2
+	$TEST_DIR/fw_filesystem.sh
+
+	proc_set_force_sysfs_fallback $1
+	proc_set_ignore_sysfs_fallback $2
+	$TEST_DIR/fw_fallback.sh
+
+	proc_set_force_sysfs_fallback $1
+	proc_set_ignore_sysfs_fallback $2
+	$TEST_DIR/fw_upload.sh
+}
+
+run_test_config_0001()
+{
+	echo "-----------------------------------------------------"
+	echo "Running kernel configuration test 1 -- rare"
+	echo "Emulates:"
+	echo "CONFIG_FW_LOADER=y"
+	echo "CONFIG_FW_LOADER_USER_HELPER=n"
+	echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n"
+	run_tests 0 1
+}
+
+run_test_config_0002()
+{
+	echo "-----------------------------------------------------"
+	echo "Running kernel configuration test 2 -- distro"
+	echo "Emulates:"
+	echo "CONFIG_FW_LOADER=y"
+	echo "CONFIG_FW_LOADER_USER_HELPER=y"
+	echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n"
+	proc_set_ignore_sysfs_fallback 0
+	run_tests 0 0
+}
+
+run_test_config_0003()
+{
+	echo "-----------------------------------------------------"
+	echo "Running kernel configuration test 3 -- android"
+	echo "Emulates:"
+	echo "CONFIG_FW_LOADER=y"
+	echo "CONFIG_FW_LOADER_USER_HELPER=y"
+	echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y"
+	run_tests 1 0
+}
+
+check_mods
+check_setup
+
+echo "Running namespace test: "
+$TEST_DIR/fw_namespace $DIR/trigger_request
+echo "OK"
+
+if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then
+	run_test_config_0001
+	run_test_config_0002
+	run_test_config_0003
+else
+	echo "Running basic kernel configuration, working with your config"
+	run_tests
+fi

linux-7.2.3/tools/testing/selftests/firmware/fw_upload.sh

@@ -0,0 +1,214 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# This validates the user-initiated fw upload mechanism of the firmware
+# loader. It verifies that one or more firmware devices can be created
+# for a device driver. It also verifies the data transfer, the
+# cancellation support, and the error flows.
+set -e
+
+TEST_REQS_FW_UPLOAD="yes"
+TEST_DIR=$(dirname $0)
+
+progress_states="preparing transferring  programming"
+errors="hw-error
+	timeout
+	device-busy
+	invalid-file-size
+	read-write-error
+	flash-wearout"
+error_abort="user-abort"
+fwname1=fw1
+fwname2=fw2
+fwname3=fw3
+
+source $TEST_DIR/fw_lib.sh
+
+check_mods
+check_setup
+verify_reqs
+
+trap "upload_finish" EXIT
+
+upload_finish() {
+	local fwdevs="$fwname1 $fwname2 $fwname3"
+
+	for name in $fwdevs; do
+		if [ -e "$DIR/$name" ]; then
+			echo -n "$name" > "$DIR"/upload_unregister
+		fi
+	done
+}
+
+upload_fw() {
+	local name="$1"
+	local file="$2"
+
+	echo 1 > "$DIR"/"$name"/loading
+	cat "$file" > "$DIR"/"$name"/data
+	echo 0 > "$DIR"/"$name"/loading
+}
+
+verify_fw() {
+	local name="$1"
+	local file="$2"
+
+	echo -n "$name" > "$DIR"/config_upload_name
+	if ! cmp "$file" "$DIR"/upload_read > /dev/null 2>&1; then
+		echo "$0: firmware compare for $name did not match" >&2
+		exit 1
+	fi
+
+	echo "$0: firmware upload for $name works" >&2
+	return 0
+}
+
+inject_error() {
+	local name="$1"
+	local status="$2"
+	local error="$3"
+
+	echo 1 > "$DIR"/"$name"/loading
+	echo -n "inject":"$status":"$error" > "$DIR"/"$name"/data
+	echo 0 > "$DIR"/"$name"/loading
+}
+
+await_status() {
+	local name="$1"
+	local expected="$2"
+	local status
+	local i
+
+	let i=0
+	while [ $i -lt 50 ]; do
+		status=$(cat "$DIR"/"$name"/status)
+		if [ "$status" = "$expected" ]; then
+			return 0;
+		fi
+		sleep 1e-03
+		let i=$i+1
+	done
+
+	echo "$0: Invalid status: Expected $expected, Actual $status" >&2
+	return 1;
+}
+
+await_idle() {
+	local name="$1"
+
+	await_status "$name" "idle"
+	return $?
+}
+
+expect_error() {
+	local name="$1"
+	local expected="$2"
+	local error=$(cat "$DIR"/"$name"/error)
+
+	if [ "$error" != "$expected" ]; then
+		echo "Invalid error: Expected $expected, Actual $error" >&2
+		return 1
+	fi
+
+	return 0
+}
+
+random_firmware() {
+	local bs="$1"
+	local count="$2"
+	local file=$(mktemp -p /tmp uploadfwXXX.bin)
+
+	dd if=/dev/urandom of="$file" bs="$bs" count="$count" > /dev/null 2>&1
+	echo "$file"
+}
+
+test_upload_cancel() {
+	local name="$1"
+	local status
+
+	for status in $progress_states; do
+		inject_error $name $status $error_abort
+		if ! await_status $name $status; then
+			exit 1
+		fi
+
+		echo 1 > "$DIR"/"$name"/cancel
+
+		if ! await_idle $name; then
+			exit 1
+		fi
+
+		if ! expect_error $name "$status":"$error_abort"; then
+			exit 1
+		fi
+	done
+
+	echo "$0: firmware upload cancellation works"
+	return 0
+}
+
+test_error_handling() {
+	local name=$1
+	local status
+	local error
+
+	for status in $progress_states; do
+		for error in $errors; do
+			inject_error $name $status $error
+
+			if ! await_idle $name; then
+				exit 1
+			fi
+
+			if ! expect_error $name "$status":"$error"; then
+				exit 1
+			fi
+
+		done
+	done
+	echo "$0: firmware upload error handling works"
+}
+
+test_fw_too_big() {
+	local name=$1
+	local fw_too_big=`random_firmware 512 5`
+	local expected="preparing:invalid-file-size"
+
+	upload_fw $name $fw_too_big
+	rm -f $fw_too_big
+
+	if ! await_idle $name; then
+		exit 1
+	fi
+
+	if ! expect_error $name $expected; then
+		exit 1
+	fi
+
+	echo "$0: oversized firmware error handling works"
+}
+
+echo -n "$fwname1" > "$DIR"/upload_register
+echo -n "$fwname2" > "$DIR"/upload_register
+echo -n "$fwname3" > "$DIR"/upload_register
+
+test_upload_cancel $fwname1
+test_error_handling $fwname1
+test_fw_too_big $fwname1
+
+fw_file1=`random_firmware 512 4`
+fw_file2=`random_firmware 512 3`
+fw_file3=`random_firmware 512 2`
+
+upload_fw $fwname1 $fw_file1
+upload_fw $fwname2 $fw_file2
+upload_fw $fwname3 $fw_file3
+
+verify_fw ${fwname1} ${fw_file1}
+verify_fw ${fwname2} ${fw_file2}
+verify_fw ${fwname3} ${fw_file3}
+
+echo -n "$fwname1" > "$DIR"/upload_unregister
+echo -n "$fwname2" > "$DIR"/upload_unregister
+echo -n "$fwname3" > "$DIR"/upload_unregister
+
+exit 0

linux-7.2.3/tools/testing/selftests/firmware/settings

@@ -0,0 +1,8 @@
+# The async firmware timeout is set to 1 second (but ends up being effectively
+# 2 seconds). There are 3 test configs, each done with and without firmware
+# present, each with 2 "nowait" functions tested 5 times. Expected time for a
+# normal execution should be 2 * 3 * 2 * 2 * 5 = 120 seconds for those alone.
+# Additionally, fw_fallback may take 5 seconds for internal timeouts in each
+# of the 3 configs, so at least another 15 seconds are needed. Add another
+# 10 seconds for each testing config: 120 + 15 + 30
+timeout=165