Resguardo inicial

linux-7.2.3/tools/testing/selftests/ftrace/test.d/event/event-enable.tc

@@ -0,0 +1,48 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: event tracing - enable/disable with event level files
+# requires: set_event events/sched
+# flags: instance
+
+do_reset() {
+    echo > set_event
+    clear_trace
+}
+
+fail() { #msg
+    echo $1
+    exit_fail
+}
+
+echo 'sched:sched_switch' > set_event
+
+yield
+
+count=`cat trace | grep sched_switch | wc -l`
+if [ $count -eq 0 ]; then
+    fail "sched_switch events are not recorded"
+fi
+
+do_reset
+
+echo 1 > events/sched/sched_switch/enable
+
+yield
+
+count=`cat trace | grep sched_switch | wc -l`
+if [ $count -eq 0 ]; then
+    fail "sched_switch events are not recorded"
+fi
+
+do_reset
+
+echo 0 > events/sched/sched_switch/enable
+
+yield
+
+count=`cat trace | grep sched_switch | wc -l`
+if [ $count -ne 0 ]; then
+    fail "sched_switch events should not be recorded"
+fi
+
+exit 0

linux-7.2.3/tools/testing/selftests/ftrace/test.d/event/event-mod.tc

@@ -0,0 +1,191 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: event tracing - enable/disable with module event
+# requires: set_event "Can enable module events via: :mod:":README
+# flags: instance
+
+rmmod trace-events-sample ||:
+if ! modprobe trace-events-sample ; then
+  echo "No trace-events sample module - please make CONFIG_SAMPLE_TRACE_EVENTS=m"
+  exit_unresolved;
+fi
+trap "rmmod trace-events-sample" EXIT
+
+# Set events for the module
+echo ":mod:trace-events-sample" > set_event
+
+test_all_enabled() {
+
+	# Check if more than one is enabled
+	grep -q sample-trace:foo_bar set_event
+	grep -q sample-trace:foo_bar_with_cond set_event
+	grep -q sample-trace:foo_bar_with_fn set_event
+
+	# All of them should be enabled. Check via the enable file
+	val=`cat events/sample-trace/enable`
+	if [ $val -ne 1 ]; then
+		exit_fail
+	fi
+}
+
+clear_events() {
+	echo > set_event
+	val=`cat events/enable`
+	if [ "$val" != "0" ]; then
+		exit_fail
+	fi
+	count=`cat set_event | wc -l`
+	if [ $count -ne 0 ]; then
+		exit_fail
+	fi
+}
+
+test_all_enabled
+
+echo clear all events
+echo 0 > events/enable
+
+echo Confirm the events are disabled
+val=`cat events/sample-trace/enable`
+if [ $val -ne 0 ]; then
+	exit_fail
+fi
+
+echo And the set_event file is empty
+
+cnt=`wc -l set_event`
+if [ $cnt -ne 0 ]; then
+	exit_fail
+fi
+
+echo now enable all events
+echo 1 > events/enable
+
+echo Confirm the events are enabled again
+val=`cat events/sample-trace/enable`
+if [ $val -ne 1 ]; then
+	exit_fail
+fi
+
+echo disable just the module events
+echo '!:mod:trace-events-sample' >> set_event
+
+echo Should have mix of events enabled
+val=`cat events/enable`
+if [ "$val" != "X" ]; then
+	exit_fail
+fi
+
+echo Confirm the module events are disabled
+val=`cat events/sample-trace/enable`
+if [ $val -ne 0 ]; then
+	exit_fail
+fi
+
+echo 0 > events/enable
+
+echo now enable the system events
+echo 'sample-trace:mod:trace-events-sample' > set_event
+
+test_all_enabled
+
+echo clear all events
+echo 0 > events/enable
+
+echo Confirm the events are disabled
+val=`cat events/sample-trace/enable`
+if [ $val -ne 0 ]; then
+	exit_fail
+fi
+
+echo Test enabling foo_bar only
+echo 'foo_bar:mod:trace-events-sample' > set_event
+
+grep -q sample-trace:foo_bar set_event
+
+echo make sure nothing is found besides foo_bar
+if grep -q -v sample-trace:foo_bar set_event ; then
+	exit_fail
+fi
+
+echo Append another using the system and event name
+echo 'sample-trace:foo_bar_with_cond:mod:trace-events-sample' >> set_event
+
+grep -q sample-trace:foo_bar set_event
+grep -q sample-trace:foo_bar_with_cond set_event
+
+count=`cat set_event | wc -l`
+
+if [ $count -ne 2 ]; then
+	exit_fail
+fi
+
+clear_events
+
+rmmod trace-events-sample
+
+echo ':mod:trace-events-sample' > set_event
+
+echo make sure that the module shows up, and '-' is converted to '_'
+grep -q '\*:\*:mod:trace_events_sample' set_event
+
+modprobe trace-events-sample
+
+test_all_enabled
+
+clear_events
+
+rmmod trace-events-sample
+
+echo Enable just the system events
+echo 'sample-trace:mod:trace-events-sample' > set_event
+grep -q 'sample-trace:mod:trace_events_sample' set_event
+
+modprobe trace-events-sample
+
+test_all_enabled
+
+clear_events
+
+rmmod trace-events-sample
+
+echo Enable event with just event name
+echo 'foo_bar:mod:trace-events-sample' > set_event
+grep -q 'foo_bar:mod:trace_events_sample' set_event
+
+echo Enable another event with both system and event name
+echo 'sample-trace:foo_bar_with_cond:mod:trace-events-sample' >> set_event
+grep -q 'sample-trace:foo_bar_with_cond:mod:trace_events_sample' set_event
+echo Make sure the other event was still there
+grep -q 'foo_bar:mod:trace_events_sample' set_event
+
+modprobe trace-events-sample
+
+echo There should be no :mod: cached events
+if grep -q ':mod:' set_event; then
+	exit_fail
+fi
+
+echo two events should be enabled
+count=`cat set_event | wc -l`
+if [ $count -ne 2 ]; then
+	exit_fail
+fi
+
+echo only two events should be enabled
+val=`cat events/sample-trace/enable`
+if [ "$val" != "X" ]; then
+	exit_fail
+fi
+
+val=`cat events/sample-trace/foo_bar/enable`
+if [ "$val" != "1" ]; then
+	exit_fail
+fi
+
+val=`cat events/sample-trace/foo_bar_with_cond/enable`
+if [ "$val" != "1" ]; then
+	exit_fail
+fi
+
+clear_trace

linux-7.2.3/tools/testing/selftests/ftrace/test.d/event/event-no-pid.tc

@@ -0,0 +1,123 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: event tracing - restricts events based on pid notrace filtering
+# requires: set_event events/sched set_event_pid set_event_notrace_pid
+# flags: instance
+
+do_reset() {
+    echo > set_event
+    echo > set_event_pid
+    echo > set_event_notrace_pid
+    echo 0 > options/event-fork
+    echo 0 > events/enable
+    clear_trace
+    echo 1 > tracing_on
+}
+
+fail() { #msg
+    cat trace
+    do_reset
+    echo $1
+    exit_fail
+}
+
+count_pid() {
+    pid=$@
+    cat trace | grep -v '^#' | sed -e 's/[^-]*-\([0-9]*\).*/\1/' | grep $pid | wc -l
+}
+
+count_no_pid() {
+    pid=$1
+    cat trace | grep -v '^#' | sed -e 's/[^-]*-\([0-9]*\).*/\1/' | grep -v $pid | wc -l
+}
+
+enable_system() {
+    system=$1
+
+    if [ -d events/$system ]; then
+	echo 1 > events/$system/enable
+    fi
+}
+
+enable_events() {
+    echo 0 > tracing_on
+    # Enable common groups of events, as all events can allow for
+    # events to be traced via scheduling that we don't care to test.
+    enable_system syscalls
+    enable_system rcu
+    enable_system block
+    enable_system exceptions
+    enable_system irq
+    enable_system net
+    enable_system power
+    enable_system signal
+    enable_system sock
+    enable_system timer
+    enable_system thermal
+    echo 1 > tracing_on
+}
+
+other_task() {
+    sleep .001 || usleep 1 || sleep 1
+}
+
+echo 0 > options/event-fork
+
+do_reset
+
+read mypid rest < /proc/self/stat
+
+echo $mypid > set_event_notrace_pid
+grep -q $mypid set_event_notrace_pid
+
+enable_events
+
+yield
+
+echo 0 > tracing_on
+
+cnt=`count_pid $mypid`
+if [ $cnt -ne 0 ]; then
+    fail "Filtered out task has events"
+fi
+
+cnt=`count_no_pid $mypid`
+if [ $cnt -eq 0 ]; then
+    fail "No other events were recorded"
+fi
+
+do_reset
+
+echo $mypid > set_event_notrace_pid
+echo 1 > options/event-fork
+
+enable_events
+
+yield &
+child=$!
+echo "child = $child"
+wait $child
+
+# Be sure some other events will happen for small systems (e.g. 1 core)
+other_task
+
+echo 0 > tracing_on
+
+cnt=`count_pid $mypid`
+if [ $cnt -ne 0 ]; then
+    fail "Filtered out task has events"
+fi
+
+cnt=`count_pid $child`
+if [ $cnt -ne 0 ]; then
+    fail "Child of filtered out taskhas events"
+fi
+
+cnt=`count_no_pid $mypid`
+if [ $cnt -eq 0 ]; then
+    fail "No other events were recorded"
+fi
+
+do_reset
+
+exit 0

linux-7.2.3/tools/testing/selftests/ftrace/test.d/event/event-pid.tc

@@ -0,0 +1,61 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: event tracing - restricts events based on pid
+# requires: set_event set_event_pid events/sched
+# flags: instance
+
+do_reset() {
+    echo > set_event
+    echo > set_event_pid
+    echo 0 > options/event-fork
+    clear_trace
+}
+
+fail() { #msg
+    do_reset
+    echo $1
+    exit_fail
+}
+
+echo 0 > options/event-fork
+
+echo 1 > events/sched/sched_switch/enable
+
+yield
+
+count=`cat trace | grep sched_switch | wc -l`
+if [ $count -eq 0 ]; then
+    fail "sched_switch events are not recorded"
+fi
+
+do_reset
+
+read mypid rest < /proc/self/stat
+
+echo $mypid > set_event_pid
+grep -q $mypid set_event_pid
+echo 'sched:sched_switch' > set_event
+
+yield
+
+count=`cat trace | grep sched_switch | grep -v "pid=$mypid" | wc -l`
+if [ $count -ne 0 ]; then
+    fail "sched_switch events from other task are recorded"
+fi
+
+do_reset
+
+echo $mypid > set_event_pid
+echo 1 > options/event-fork
+echo 1 > events/sched/sched_switch/enable
+
+yield
+
+count=`cat trace | grep sched_switch | grep -v "pid=$mypid" | wc -l`
+if [ $count -eq 0 ]; then
+    fail "sched_switch events from other task are not recorded"
+fi
+
+do_reset
+
+exit 0

linux-7.2.3/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc

@@ -0,0 +1,72 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: event tracing - enable/disable with subsystem level files
+# requires: set_event events/sched/enable
+# flags: instance
+
+do_reset() {
+    echo > set_event
+    clear_trace
+}
+
+fail() { #msg
+    echo $1
+    exit_fail
+}
+
+# As reading trace can last forever, simply look for 3 different
+# events then exit out of reading the file. If there's not 3 different
+# events, then the test has failed.
+check_unique() {
+    cat trace | grep -v '^#' | awk '
+	BEGIN { cnt = 0; }
+	{
+	    for (i = 0; i < cnt; i++) {
+		if (event[i] == $5) {
+		    break;
+		}
+	    }
+	    if (i == cnt) {
+		event[cnt++] = $5;
+		if (cnt > 2) {
+		    exit;
+		}
+	    }
+	}
+	END {
+	    printf "%d", cnt;
+	}'
+}
+
+echo 'sched:*' > set_event
+
+yield
+
+count=`check_unique`
+if [ $count -lt 3 ]; then
+    fail "at least fork, exec and exit events should be recorded"
+fi
+
+do_reset
+
+echo 1 > events/sched/enable
+
+yield
+
+count=`check_unique`
+if [ $count -lt 3 ]; then
+    fail "at least fork, exec and exit events should be recorded"
+fi
+
+do_reset
+
+echo 0 > events/sched/enable
+
+yield
+
+count=`head -n 100 trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
+if [ $count -ne 0 ]; then
+    fail "any of scheduler events should not be recorded"
+fi
+
+exit 0

linux-7.2.3/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc

@@ -0,0 +1,52 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: event tracing - enable/disable with top level files
+# requires: set_event events/enable
+# flags: instance
+
+do_reset() {
+    echo > set_event
+    clear_trace
+}
+
+fail() { #msg
+    echo $1
+    exit_fail
+}
+
+echo '*:*' > set_event
+
+yield
+
+echo 0 > tracing_on
+
+count=`head -n 128 trace | grep -v ^# | wc -l`
+if [ $count -eq 0 ]; then
+    fail "none of events are recorded"
+fi
+
+do_reset
+
+echo 1 > events/enable
+echo 1 > tracing_on
+
+yield
+
+echo 0 > tracing_on
+count=`head -n 128 trace | grep -v ^# | wc -l`
+if [ $count -eq 0 ]; then
+    fail "none of events are recorded"
+fi
+
+do_reset
+
+echo 0 > events/enable
+
+yield
+
+count=`cat trace | grep -v ^# | wc -l`
+if [ $count -ne 0 ]; then
+    fail "any of events should not be recorded"
+fi
+
+exit 0

linux-7.2.3/tools/testing/selftests/ftrace/test.d/event/trace_printk.tc

@@ -0,0 +1,27 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: Test trace_printk from module
+
+rmmod trace-printk ||:
+if ! modprobe trace-printk ; then
+  echo "No trace-printk sample module - please make CONFIG_SAMPLE_TRACE_PRINTK=m"
+  exit_unresolved;
+fi
+
+echo "Waiting for irq work"
+sleep 1
+
+grep -q ": This .* trace_bputs" trace
+grep -q ": This .* trace_puts" trace
+grep -q ": This .* trace_bprintk" trace
+grep -q ": This .* trace_printk" trace
+
+grep -q ": (irq) .* trace_bputs" trace
+grep -q ": (irq) .* trace_puts" trace
+grep -q ": (irq) .* trace_bprintk" trace
+grep -q ": (irq) .* trace_printk" trace
+
+grep -q "This is a %s that will use trace_bprintk" printk_formats
+grep -q "(irq) This is a static string that will use trace_bputs" printk_formats
+
+rmmod trace-printk ||: