Resguardo inicial

linux-7.2.3/tools/testing/selftests/net/hsr/Makefile

@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+
+top_srcdir = ../../../../..
+
+TEST_PROGS := \
+	hsr_ping.sh \
+	hsr_redbox.sh \
+	link_faults.sh \
+	prp_ping.sh \
+# end of TEST_PROGS
+
+TEST_FILES += hsr_common.sh
+
+include ../../lib.mk

linux-7.2.3/tools/testing/selftests/net/hsr/config

@@ -0,0 +1,6 @@
+CONFIG_BRIDGE=y
+CONFIG_HSR=y
+CONFIG_IPV6=y
+CONFIG_NET_SCH_NETEM=m
+CONFIG_VETH=y
+CONFIG_VLAN_8021Q=m

linux-7.2.3/tools/testing/selftests/net/hsr/hsr_common.sh

@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+# Common code for HSR testing scripts
+
+source ../lib.sh
+ret=0
+ksft_skip=4
+
+# $1: IP address
+is_v6()
+{
+	[ -z "${1##*:*}" ]
+}
+
+do_ping()
+{
+	local netns="$1"
+	local connect_addr="$2"
+	local ping_args="-q -c 2 -i 0.1"
+
+	if is_v6 "${connect_addr}"; then
+		$ipv6 || return 0
+		ping_args="${ping_args} -6"
+	fi
+
+	ip netns exec ${netns} ping ${ping_args} $connect_addr >/dev/null
+	if [ $? -ne 0 ] ; then
+		echo "$netns -> $connect_addr connectivity [ FAIL ]" 1>&2
+		ret=1
+		return 1
+	fi
+
+	return 0
+}
+
+do_ping_long()
+{
+	local netns="$1"
+	local connect_addr="$2"
+	local ping_args="-q -c 10 -i 0.1"
+
+	if is_v6 "${connect_addr}"; then
+		$ipv6 || return 0
+		ping_args="${ping_args} -6"
+	fi
+
+	OUT="$(LANG=C ip netns exec ${netns} ping ${ping_args} $connect_addr | grep received)"
+	if [ $? -ne 0 ] ; then
+		echo "$netns -> $connect_addr ping [ FAIL ]" 1>&2
+		ret=1
+		return 1
+	fi
+
+	VAL="$(echo $OUT | cut -d' ' -f1-8)"
+	SED_VAL="$(echo ${VAL} | sed -r -e 's/([0-9]{2}).*([0-9]{2}).*[[:space:]]([0-9]+%).*/\1 transmitted \2 received \3 loss/')"
+	if [ "${SED_VAL}" != "10 transmitted 10 received 0% loss" ]
+	then
+		echo "$netns -> $connect_addr ping TEST [ FAIL ]"
+		echo "Expect to send and receive 10 packets and no duplicates."
+		echo "Full message: ${OUT}."
+		ret=1
+		return 1
+	fi
+
+	return 0
+}
+
+stop_if_error()
+{
+	local msg="$1"
+
+	if [ ${ret} -ne 0 ]; then
+		echo "FAIL: ${msg}" 1>&2
+		exit ${ret}
+	fi
+}
+
+check_prerequisites()
+{
+	ip -Version > /dev/null 2>&1
+	if [ $? -ne 0 ];then
+		echo "SKIP: Could not run test without ip tool"
+		exit $ksft_skip
+	fi
+}

linux-7.2.3/tools/testing/selftests/net/hsr/hsr_ping.sh

@@ -0,0 +1,206 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ipv6=true
+
+source ./hsr_common.sh
+
+optstring="h4"
+usage() {
+	echo "Usage: $0 [OPTION]"
+	echo -e "\t-4: IPv4 only: disable IPv6 tests (default: test both IPv4 and IPv6)"
+}
+
+while getopts "$optstring" option;do
+	case "$option" in
+	"h")
+		usage $0
+		exit 0
+		;;
+	"4")
+		ipv6=false
+		;;
+	"?")
+		usage $0
+		exit 1
+		;;
+esac
+done
+
+do_ping_tests()
+{
+	local netid="$1"
+
+	echo "INFO: Running ping tests."
+
+	echo "INFO: Initial validation ping."
+	# Each node has to be able to reach each one.
+	do_ping "$ns1" "100.64.$netid.2"
+	do_ping "$ns1" "100.64.$netid.3"
+	do_ping "$ns2" "100.64.$netid.1"
+	do_ping "$ns2" "100.64.$netid.3"
+	do_ping "$ns3" "100.64.$netid.1"
+	do_ping "$ns3" "100.64.$netid.2"
+	stop_if_error "Initial validation failed on IPv4."
+
+	do_ping "$ns1" "dead:beef:$netid::2"
+	do_ping "$ns1" "dead:beef:$netid::3"
+	do_ping "$ns2" "dead:beef:$netid::1"
+	do_ping "$ns2" "dead:beef:$netid::2"
+	do_ping "$ns3" "dead:beef:$netid::1"
+	do_ping "$ns3" "dead:beef:$netid::2"
+	stop_if_error "Initial validation failed on IPv6."
+
+# Wait until supervisor all supervision frames have been processed and the node
+# entries have been merged. Otherwise duplicate frames will be observed which is
+# valid at this stage.
+	echo "INFO: Wait for node table entries to be merged."
+	WAIT=5
+	while [ ${WAIT} -gt 0 ]
+	do
+		grep 00:00:00:00:00:00 /sys/kernel/debug/hsr/hsr*/node_table
+		if [ $? -ne 0 ]
+		then
+			break
+		fi
+		sleep 1
+		let "WAIT = WAIT - 1"
+	done
+
+# Just a safety delay in case the above check didn't handle it.
+	sleep 1
+
+	echo "INFO: Longer ping test."
+	do_ping_long "$ns1" "100.64.$netid.2"
+	do_ping_long "$ns1" "dead:beef:$netid::2"
+	do_ping_long "$ns1" "100.64.$netid.3"
+	do_ping_long "$ns1" "dead:beef:$netid::3"
+	stop_if_error "Longer ping test failed (ns1)."
+
+	do_ping_long "$ns2" "100.64.$netid.1"
+	do_ping_long "$ns2" "dead:beef:$netid::1"
+	do_ping_long "$ns2" "100.64.$netid.3"
+	do_ping_long "$ns2" "dead:beef:$netid::3"
+	stop_if_error "Longer ping test failed (ns2)."
+
+	do_ping_long "$ns3" "100.64.$netid.1"
+	do_ping_long "$ns3" "dead:beef:$netid::1"
+	do_ping_long "$ns3" "100.64.$netid.2"
+	do_ping_long "$ns3" "dead:beef:$netid::2"
+	stop_if_error "Longer ping test failed (ns3)."
+}
+
+setup_hsr_interfaces()
+{
+	local HSRv="$1"
+
+	echo "INFO: Preparing interfaces for HSRv${HSRv}."
+# Three HSR nodes. Each node has one link to each of its neighbour, two links in total.
+#
+#    ns1eth1 ----- ns2eth1
+#      hsr1         hsr2
+#    ns1eth2       ns2eth2
+#       |            |
+#    ns3eth1      ns3eth2
+#           \    /
+#            hsr3
+#
+	# Interfaces
+	ip link add ns1eth1 netns "$ns1" type veth peer name ns2eth1 netns "$ns2"
+	ip link add ns1eth2 netns "$ns1" type veth peer name ns3eth1 netns "$ns3"
+	ip link add ns3eth2 netns "$ns3" type veth peer name ns2eth2 netns "$ns2"
+
+	# HSRv0/1
+	ip -net "$ns1" link add name hsr1 type hsr slave1 ns1eth1 \
+		slave2 ns1eth2 supervision 45 version "$HSRv" proto 0
+	ip -net "$ns2" link add name hsr2 type hsr slave1 ns2eth1 \
+		slave2 ns2eth2 supervision 45 version "$HSRv" proto 0
+	ip -net "$ns3" link add name hsr3 type hsr slave1 ns3eth1 \
+		slave2 ns3eth2 supervision 45 version "$HSRv" proto 0
+
+	# IP for HSR
+	ip -net "$ns1" addr add 100.64.0.1/24 dev hsr1
+	ip -net "$ns1" addr add dead:beef:0::1/64 dev hsr1 nodad
+	ip -net "$ns2" addr add 100.64.0.2/24 dev hsr2
+	ip -net "$ns2" addr add dead:beef:0::2/64 dev hsr2 nodad
+	ip -net "$ns3" addr add 100.64.0.3/24 dev hsr3
+	ip -net "$ns3" addr add dead:beef:0::3/64 dev hsr3 nodad
+
+	ip -net "$ns1" link set address 00:11:22:00:01:01 dev ns1eth1
+	ip -net "$ns1" link set address 00:11:22:00:01:02 dev ns1eth2
+
+	ip -net "$ns2" link set address 00:11:22:00:02:01 dev ns2eth1
+	ip -net "$ns2" link set address 00:11:22:00:02:02 dev ns2eth2
+
+	ip -net "$ns3" link set address 00:11:22:00:03:01 dev ns3eth1
+	ip -net "$ns3" link set address 00:11:22:00:03:02 dev ns3eth2
+
+	# All Links up
+	ip -net "$ns1" link set ns1eth1 up
+	ip -net "$ns1" link set ns1eth2 up
+	ip -net "$ns1" link set hsr1 up
+
+	ip -net "$ns2" link set ns2eth1 up
+	ip -net "$ns2" link set ns2eth2 up
+	ip -net "$ns2" link set hsr2 up
+
+	ip -net "$ns3" link set ns3eth1 up
+	ip -net "$ns3" link set ns3eth2 up
+	ip -net "$ns3" link set hsr3 up
+}
+
+setup_vlan_interfaces() {
+	ip -net "$ns1" link add link hsr1 name hsr1.2 type vlan id 2
+	ip -net "$ns2" link add link hsr2 name hsr2.2 type vlan id 2
+	ip -net "$ns3" link add link hsr3 name hsr3.2 type vlan id 2
+
+	ip -net "$ns1" addr add 100.64.2.1/24 dev hsr1.2
+	ip -net "$ns1" addr add dead:beef:2::1/64 dev hsr1.2 nodad
+
+	ip -net "$ns2" addr add 100.64.2.2/24 dev hsr2.2
+	ip -net "$ns2" addr add dead:beef:2::2/64 dev hsr2.2 nodad
+
+	ip -net "$ns3" addr add 100.64.2.3/24 dev hsr3.2
+	ip -net "$ns3" addr add dead:beef:2::3/64 dev hsr3.2 nodad
+
+	ip -net "$ns1" link set dev hsr1.2 up
+	ip -net "$ns2" link set dev hsr2.2 up
+	ip -net "$ns3" link set dev hsr3.2 up
+
+}
+
+run_ping_tests()
+{
+	echo "INFO: Running ping tests."
+	do_ping_tests 0
+}
+
+run_vlan_tests()
+{
+	vlan_challenged_hsr1=$(ip net exec "$ns1" ethtool -k hsr1 | grep "vlan-challenged" | awk '{print $2}')
+	vlan_challenged_hsr2=$(ip net exec "$ns2" ethtool -k hsr2 | grep "vlan-challenged" | awk '{print $2}')
+	vlan_challenged_hsr3=$(ip net exec "$ns3" ethtool -k hsr3 | grep "vlan-challenged" | awk '{print $2}')
+
+	if [[ "$vlan_challenged_hsr1" = "off" || "$vlan_challenged_hsr2" = "off" || "$vlan_challenged_hsr3" = "off" ]]; then
+		echo "INFO: Running VLAN ping tests"
+		setup_vlan_interfaces
+		do_ping_tests 2
+	else
+		echo "INFO: Not Running VLAN tests as the device does not support VLAN"
+	fi
+}
+
+check_prerequisites
+trap cleanup_all_ns EXIT
+
+setup_ns ns1 ns2 ns3
+setup_hsr_interfaces 0
+run_ping_tests
+run_vlan_tests
+
+setup_ns ns1 ns2 ns3
+setup_hsr_interfaces 1
+run_ping_tests
+run_vlan_tests
+
+exit $ret

linux-7.2.3/tools/testing/selftests/net/hsr/hsr_redbox.sh

@@ -0,0 +1,136 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ipv6=false
+
+source ./hsr_common.sh
+
+do_complete_ping_test()
+{
+	echo "INFO: Initial validation ping (HSR-SAN/RedBox)."
+	# Each node has to be able to reach each one.
+	do_ping "${ns1}" 100.64.0.2
+	do_ping "${ns2}" 100.64.0.1
+	# Ping between SANs (test bridge)
+	do_ping "${ns4}" 100.64.0.51
+	do_ping "${ns5}" 100.64.0.41
+	# Ping from SANs to hsr1 (via hsr2) (and opposite)
+	do_ping "${ns3}" 100.64.0.1
+	do_ping "${ns1}" 100.64.0.3
+	do_ping "${ns1}" 100.64.0.41
+	do_ping "${ns4}" 100.64.0.1
+	do_ping "${ns1}" 100.64.0.51
+	do_ping "${ns5}" 100.64.0.1
+	stop_if_error "Initial validation failed."
+
+	# Wait for MGNT HSR frames being received and nodes being
+	# merged.
+	sleep 5
+
+	echo "INFO: Longer ping test (HSR-SAN/RedBox)."
+	# Ping from SAN to hsr1 (via hsr2)
+	do_ping_long "${ns3}" 100.64.0.1
+	# Ping from hsr1 (via hsr2) to SANs (and opposite)
+	do_ping_long "${ns1}" 100.64.0.3
+	do_ping_long "${ns1}" 100.64.0.41
+	do_ping_long "${ns4}" 100.64.0.1
+	do_ping_long "${ns1}" 100.64.0.51
+	do_ping_long "${ns5}" 100.64.0.1
+	stop_if_error "Longer ping test failed."
+
+	echo "INFO: All good."
+}
+
+setup_hsr_interfaces()
+{
+	local HSRv="$1"
+
+	echo "INFO: preparing interfaces for HSRv${HSRv} (HSR-SAN/RedBox)."
+#
+# IPv4 addresses (100.64.X.Y/24), and [X.Y] is presented on below diagram:
+#
+#
+# |NS1                     |               |NS4                |
+# |       [0.1]            |               |                   |
+# |    /-- hsr1 --\        |               |    [0.41]         |
+# | ns1eth1     ns1eth2    |               |    ns4eth1 (SAN)  |
+# |------------------------|               |-------------------|
+#      |            |                                |
+#      |            |                                |
+#      |            |                                |
+# |------------------------|   |-------------------------------|
+# | ns2eth1     ns2eth2    |   |                  ns3eth2      |
+# |    \-- hsr2 --/        |   |                 /             |
+# |      [0.2] \           |   |                /              |  |------------|
+# |             ns2eth3    |---| ns3eth1 -- ns3br1 -- ns3eth3--|--| ns5eth1    |
+# |             (interlink)|   | [0.3]      [0.11]             |  | [0.51]     |
+# |NS2 (RedBOX)            |   |NS3 (BR)                       |  | NS5 (SAN)  |
+#
+#
+	# Check if iproute2 supports adding interlink port to hsrX device
+	ip link help hsr | grep -q INTERLINK
+	[ $? -ne 0 ] && { echo "iproute2: HSR interlink interface not supported!"; exit 0; }
+
+	# Create interfaces for name spaces
+	ip link add ns1eth1 netns "${ns1}" type veth peer name ns2eth1 netns "${ns2}"
+	ip link add ns1eth2 netns "${ns1}" type veth peer name ns2eth2 netns "${ns2}"
+	ip link add ns2eth3 netns "${ns2}" type veth peer name ns3eth1 netns "${ns3}"
+	ip link add ns3eth2 netns "${ns3}" type veth peer name ns4eth1 netns "${ns4}"
+	ip link add ns3eth3 netns "${ns3}" type veth peer name ns5eth1 netns "${ns5}"
+
+	sleep 1
+
+	ip -n "${ns1}" link set ns1eth1 up
+	ip -n "${ns1}" link set ns1eth2 up
+
+	ip -n "${ns2}" link set ns2eth1 up
+	ip -n "${ns2}" link set ns2eth2 up
+	ip -n "${ns2}" link set ns2eth3 up
+
+	ip -n "${ns3}" link add name ns3br1 type bridge
+	ip -n "${ns3}" link set ns3br1 up
+	ip -n "${ns3}" link set ns3eth1 master ns3br1 up
+	ip -n "${ns3}" link set ns3eth2 master ns3br1 up
+	ip -n "${ns3}" link set ns3eth3 master ns3br1 up
+
+	ip -n "${ns4}" link set ns4eth1 up
+	ip -n "${ns5}" link set ns5eth1 up
+
+	ip -net "$ns1" link set address 00:11:22:00:01:01 dev ns1eth1
+	ip -net "$ns1" link set address 00:11:22:00:01:02 dev ns1eth2
+
+	ip -net "$ns2" link set address 00:11:22:00:02:01 dev ns2eth1
+	ip -net "$ns2" link set address 00:11:22:00:02:02 dev ns2eth2
+	ip -net "$ns2" link set address 00:11:22:00:02:03 dev ns2eth3
+
+	ip -net "$ns3" link set address 00:11:22:00:03:11 dev ns3eth1
+	ip -net "$ns3" link set address 00:11:22:00:03:11 dev ns3eth2
+	ip -net "$ns3" link set address 00:11:22:00:03:11 dev ns3eth3
+	ip -net "$ns3" link set address 00:11:22:00:03:11 dev ns3br1
+
+	ip -net "$ns4" link set address 00:11:22:00:04:01 dev ns4eth1
+	ip -net "$ns5" link set address 00:11:22:00:05:01 dev ns5eth1
+
+	ip -net "${ns1}" link add name hsr1 type hsr slave1 ns1eth1 slave2 ns1eth2 supervision 45 version ${HSRv} proto 0
+	ip -net "${ns2}" link add name hsr2 type hsr slave1 ns2eth1 slave2 ns2eth2 interlink ns2eth3 supervision 45 version ${HSRv} proto 0
+
+	ip -n "${ns1}" addr add 100.64.0.1/24 dev hsr1
+	ip -n "${ns2}" addr add 100.64.0.2/24 dev hsr2
+	ip -n "${ns3}" addr add 100.64.0.11/24 dev ns3br1
+	ip -n "${ns3}" addr add 100.64.0.3/24 dev ns3eth1
+	ip -n "${ns4}" addr add 100.64.0.41/24 dev ns4eth1
+	ip -n "${ns5}" addr add 100.64.0.51/24 dev ns5eth1
+
+	ip -n "${ns1}" link set hsr1 up
+	ip -n "${ns2}" link set hsr2 up
+}
+
+check_prerequisites
+setup_ns ns1 ns2 ns3 ns4 ns5
+
+trap cleanup_all_ns EXIT
+
+setup_hsr_interfaces 1
+do_complete_ping_test
+
+exit $ret

linux-7.2.3/tools/testing/selftests/net/hsr/link_faults.sh

@@ -0,0 +1,378 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# shellcheck disable=SC2329
+
+source ../lib.sh
+
+ALL_TESTS="
+	test_clean_hsrv0
+	test_cut_link_hsrv0
+	test_packet_loss_hsrv0
+	test_high_packet_loss_hsrv0
+	test_reordering_hsrv0
+
+	test_clean_hsrv1
+	test_cut_link_hsrv1
+	test_packet_loss_hsrv1
+	test_high_packet_loss_hsrv1
+	test_reordering_hsrv1
+
+	test_clean_prp
+	test_cut_link_prp
+	test_packet_loss_prp
+	test_high_packet_loss_prp
+	test_reordering_prp
+"
+
+# The tests are running ping for 5sec with a relatively short interval in
+# different scenarios with faulty links (cut links, packet loss, delay,
+# reordering) that should be recoverable by HSR/PRP. The ping interval (10ms)
+# is short enough that the base delay (50ms) leads to a queue in the netem
+# qdiscs which is needed for reordering.
+
+setup_hsr_topo()
+{
+	# Three HSR nodes in a ring, every node has a LAN A interface connected
+	# to the LAN B interface of the next node.
+	#
+	#    node1            node2
+	#
+	#     vethA -------- vethB
+	#   hsr1                 hsr2
+	#     vethB          vethA
+	#         \          /
+	#         vethA  vethB
+	#             hsr3
+	#
+	#            node3
+
+	local ver="$1"
+
+	setup_ns node1 node2 node3
+
+	# veth links
+	# shellcheck disable=SC2154 # variables assigned by setup_ns
+	ip link add vethA netns "$node1" type veth peer name vethB netns "$node2"
+	# shellcheck disable=SC2154 # variables assigned by setup_ns
+	ip link add vethA netns "$node2" type veth peer name vethB netns "$node3"
+	ip link add vethA netns "$node3" type veth peer name vethB netns "$node1"
+
+	# MAC addresses (not needed for HSR operation, but helps with debugging)
+	ip -net "$node1" link set address 00:11:22:00:01:01 dev vethA
+	ip -net "$node1" link set address 00:11:22:00:01:02 dev vethB
+
+	ip -net "$node2" link set address 00:11:22:00:02:01 dev vethA
+	ip -net "$node2" link set address 00:11:22:00:02:02 dev vethB
+
+	ip -net "$node3" link set address 00:11:22:00:03:01 dev vethA
+	ip -net "$node3" link set address 00:11:22:00:03:02 dev vethB
+
+	# HSR interfaces
+	ip -net "$node1" link add name hsr1 type hsr proto 0 version "$ver" \
+		slave1 vethA slave2 vethB supervision 45
+	ip -net "$node2" link add name hsr2 type hsr proto 0 version "$ver" \
+		slave1 vethA slave2 vethB supervision 45
+	ip -net "$node3" link add name hsr3 type hsr proto 0 version "$ver" \
+		slave1 vethA slave2 vethB supervision 45
+
+	# IP addresses
+	ip -net "$node1" addr add 100.64.0.1/24 dev hsr1
+	ip -net "$node2" addr add 100.64.0.2/24 dev hsr2
+	ip -net "$node3" addr add 100.64.0.3/24 dev hsr3
+
+	# Set all links up
+	ip -net "$node1" link set vethA up
+	ip -net "$node1" link set vethB up
+	ip -net "$node1" link set hsr1 up
+
+	ip -net "$node2" link set vethA up
+	ip -net "$node2" link set vethB up
+	ip -net "$node2" link set hsr2 up
+
+	ip -net "$node3" link set vethA up
+	ip -net "$node3" link set vethB up
+	ip -net "$node3" link set hsr3 up
+}
+
+setup_prp_topo()
+{
+	# Two PRP nodes, connected by two links (treated as LAN A and LAN B).
+	#
+	#       vethA ----- vethA
+	#     prp1             prp2
+	#       vethB ----- vethB
+	#
+	#     node1           node2
+
+	setup_ns node1 node2
+
+	# veth links
+	ip link add vethA netns "$node1" type veth peer name vethA netns "$node2"
+	ip link add vethB netns "$node1" type veth peer name vethB netns "$node2"
+
+	# MAC addresses will be copied from LAN A interface
+	ip -net "$node1" link set address 00:11:22:00:00:01 dev vethA
+	ip -net "$node2" link set address 00:11:22:00:00:02 dev vethA
+
+	# PRP interfaces
+	ip -net "$node1" link add name prp1 type hsr \
+		slave1 vethA slave2 vethB supervision 45 proto 1
+	ip -net "$node2" link add name prp2 type hsr \
+		slave1 vethA slave2 vethB supervision 45 proto 1
+
+	# IP addresses
+	ip -net "$node1" addr add 100.64.0.1/24 dev prp1
+	ip -net "$node2" addr add 100.64.0.2/24 dev prp2
+
+	# All links up
+	ip -net "$node1" link set vethA up
+	ip -net "$node1" link set vethB up
+	ip -net "$node1" link set prp1 up
+
+	ip -net "$node2" link set vethA up
+	ip -net "$node2" link set vethB up
+	ip -net "$node2" link set prp2 up
+}
+
+wait_for_hsr_node_table()
+{
+	log_info "Wait for node table entries to be merged."
+	WAIT=5
+	while [ "${WAIT}" -gt 0 ]; do
+		nts=$(cat /sys/kernel/debug/hsr/hsr*/node_table)
+
+		# We need entries in the node tables, and they need to be merged
+		if (echo "$nts" | grep -qE "^([0-9a-f]{2}:){5}") && \
+		    ! (echo "$nts" | grep -q "00:00:00:00:00:00"); then
+			return
+		fi
+
+		sleep 1
+		((WAIT--))
+	done
+	check_err 1 "Failed to wait for merged node table entries"
+}
+
+setup_topo()
+{
+	local proto="$1"
+
+	if [ "$proto" = "HSRv0" ]; then
+		setup_hsr_topo 0
+		wait_for_hsr_node_table
+	elif [ "$proto" = "HSRv1" ]; then
+		setup_hsr_topo 1
+		wait_for_hsr_node_table
+	elif [ "$proto" = "PRP" ]; then
+		setup_prp_topo
+	else
+		check_err 1 "Unknown protocol (${proto})"
+	fi
+}
+
+check_ping()
+{
+	local node="$1"
+	local dst="$2"
+	local accepted_dups="$3"
+	local ping_args="-q -i 0.01 -c 400"
+
+	log_info "Running ping $node -> $dst"
+	# shellcheck disable=SC2086
+	output=$(ip netns exec "$node" ping $ping_args "$dst" | \
+		grep "packets transmitted")
+	log_info "$output"
+
+	dups=0
+	loss=0
+
+	if [[ "$output" =~ \+([0-9]+)" duplicates" ]]; then
+		dups="${BASH_REMATCH[1]}"
+	fi
+	if [[ "$output" =~ ([0-9\.]+\%)" packet loss" ]]; then
+		loss="${BASH_REMATCH[1]}"
+	fi
+
+	if [ "$dups" -gt "$accepted_dups" ]; then
+		check_err 1 "Unexpected duplicate packets (${dups})"
+	fi
+	if [ "$loss" != "0%" ]; then
+		check_err 1 "Unexpected packet loss (${loss})"
+	fi
+}
+
+test_clean()
+{
+	local proto="$1"
+
+	RET=0
+	tname="${FUNCNAME[0]} - ${proto}"
+
+	setup_topo "$proto"
+	if ((RET != ksft_pass)); then
+		log_test "${tname} setup"
+		return
+	fi
+
+	check_ping "$node1" "100.64.0.2" 0
+
+	log_test "${tname}"
+}
+
+test_clean_hsrv0()
+{
+	test_clean "HSRv0"
+}
+
+test_clean_hsrv1()
+{
+	test_clean "HSRv1"
+}
+
+test_clean_prp()
+{
+	test_clean "PRP"
+}
+
+test_cut_link()
+{
+	local proto="$1"
+
+	RET=0
+	tname="${FUNCNAME[0]} - ${proto}"
+
+	setup_topo "$proto"
+	if ((RET != ksft_pass)); then
+		log_test "${tname} setup"
+		return
+	fi
+
+	# Cutting link from subshell, so check_ping can run in the normal shell
+	# with access to global variables from the test harness.
+	(
+		sleep 2
+		log_info "Cutting link"
+		ip -net "$node1" link set vethB down
+	) &
+	check_ping "$node1" "100.64.0.2" 0
+
+	wait
+	log_test "${tname}"
+}
+
+
+test_cut_link_hsrv0()
+{
+	test_cut_link "HSRv0"
+}
+
+test_cut_link_hsrv1()
+{
+	test_cut_link "HSRv1"
+}
+
+test_cut_link_prp()
+{
+	test_cut_link "PRP"
+}
+
+test_packet_loss()
+{
+	local proto="$1"
+	local loss="$2"
+
+	RET=0
+	tname="${FUNCNAME[0]} - ${proto}, ${loss}"
+
+	setup_topo "$proto"
+	if ((RET != ksft_pass)); then
+		log_test "${tname} setup"
+		return
+	fi
+
+	# Packet loss with lower delay makes sure the packets on the lossy link
+	# arrive first.
+	tc -net "$node1" qdisc add dev vethA root netem delay 50ms
+	tc -net "$node1" qdisc add dev vethB root netem delay 20ms loss "$loss"
+
+	check_ping "$node1" "100.64.0.2" 40
+
+	log_test "${tname}"
+}
+
+test_packet_loss_hsrv0()
+{
+	test_packet_loss "HSRv0" "20%"
+}
+
+test_packet_loss_hsrv1()
+{
+	test_packet_loss "HSRv1" "20%"
+}
+
+test_packet_loss_prp()
+{
+	test_packet_loss "PRP" "20%"
+}
+
+test_high_packet_loss_hsrv0()
+{
+	test_packet_loss "HSRv0" "80%"
+}
+
+test_high_packet_loss_hsrv1()
+{
+	test_packet_loss "HSRv1" "80%"
+}
+
+test_high_packet_loss_prp()
+{
+	test_packet_loss "PRP" "80%"
+}
+
+test_reordering()
+{
+	local proto="$1"
+
+	RET=0
+	tname="${FUNCNAME[0]} - ${proto}"
+
+	setup_topo "$proto"
+	if ((RET != ksft_pass)); then
+		log_test "${tname} setup"
+		return
+	fi
+
+	tc -net "$node1" qdisc add dev vethA root netem delay 50ms
+	tc -net "$node1" qdisc add dev vethB root netem delay 50ms reorder 20%
+
+	check_ping "$node1" "100.64.0.2" 40
+
+	log_test "${tname}"
+}
+
+test_reordering_hsrv0()
+{
+	test_reordering "HSRv0"
+}
+
+test_reordering_hsrv1()
+{
+	test_reordering "HSRv1"
+}
+
+test_reordering_prp()
+{
+	test_reordering "PRP"
+}
+
+cleanup()
+{
+	cleanup_all_ns
+}
+
+trap cleanup EXIT
+
+tests_run
+
+exit $EXIT_STATUS

linux-7.2.3/tools/testing/selftests/net/hsr/prp_ping.sh

@@ -0,0 +1,147 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ipv6=true
+
+source ./hsr_common.sh
+
+optstring="h4"
+usage() {
+	echo "Usage: $0 [OPTION]"
+	echo -e "\t-4: IPv4 only: disable IPv6 tests (default: test both IPv4 and IPv6)"
+}
+
+while getopts "$optstring" option;do
+	case "$option" in
+	"h")
+		usage "$0"
+		exit 0
+		;;
+	"4")
+		ipv6=false
+		;;
+	"?")
+		usage "$0"
+		exit 1
+		;;
+esac
+done
+
+setup_prp_interfaces()
+{
+	echo "INFO: Preparing interfaces for PRP"
+# Two PRP nodes, connected by two links (treated as LAN A and LAN B).
+#
+#       vethA ----- vethA
+#     prp1             prp2
+#       vethB ----- vethB
+#
+#     node1           node2
+
+	# Interfaces
+	# shellcheck disable=SC2154 # variables assigned by setup_ns
+	ip link add vethA netns "$node1" type veth peer name vethA netns "$node2"
+	ip link add vethB netns "$node1" type veth peer name vethB netns "$node2"
+
+	# MAC addresses will be copied from LAN A interface
+	ip -net "$node1" link set address 00:11:22:00:00:01 dev vethA
+	ip -net "$node2" link set address 00:11:22:00:00:02 dev vethA
+
+	# PRP
+	ip -net "$node1" link add name prp1 type hsr \
+		slave1 vethA slave2 vethB supervision 45 proto 1
+	ip -net "$node2" link add name prp2 type hsr \
+		slave1 vethA slave2 vethB supervision 45 proto 1
+
+	# IP addresses
+	ip -net "$node1" addr add 100.64.0.1/24 dev prp1
+	ip -net "$node1" addr add dead:beef:0::1/64 dev prp1 nodad
+	ip -net "$node2" addr add 100.64.0.2/24 dev prp2
+	ip -net "$node2" addr add dead:beef:0::2/64 dev prp2 nodad
+
+	# All links up
+	ip -net "$node1" link set vethA up
+	ip -net "$node1" link set vethB up
+	ip -net "$node1" link set prp1 up
+
+	ip -net "$node2" link set vethA up
+	ip -net "$node2" link set vethB up
+	ip -net "$node2" link set prp2 up
+}
+
+setup_vlan_interfaces()
+{
+	# Interfaces
+	ip -net "$node1" link add link prp1 name prp1.2 type vlan id 2
+	ip -net "$node2" link add link prp2 name prp2.2 type vlan id 2
+
+	# IP addresses
+	ip -net "$node1" addr add 100.64.2.1/24 dev prp1.2
+	ip -net "$node1" addr add dead:beef:2::1/64 dev prp1.2 nodad
+
+	ip -net "$node2" addr add 100.64.2.2/24 dev prp2.2
+	ip -net "$node2" addr add dead:beef:2::2/64 dev prp2.2 nodad
+
+	# All links up
+	ip -net "$node1" link set prp1.2 up
+	ip -net "$node2" link set prp2.2 up
+}
+
+do_ping_tests()
+{
+	local netid="$1"
+
+	echo "INFO: Initial validation ping"
+
+	do_ping "$node1" "100.64.$netid.2"
+	do_ping "$node2" "100.64.$netid.1"
+	stop_if_error "Initial validation failed on IPv4"
+
+	do_ping "$node1" "dead:beef:$netid::2"
+	do_ping "$node2" "dead:beef:$netid::1"
+	stop_if_error "Initial validation failed on IPv6"
+
+	echo "INFO: Longer ping test."
+
+	do_ping_long "$node1" "100.64.$netid.2"
+	do_ping_long "$node2" "100.64.$netid.1"
+	stop_if_error "Longer ping test failed on IPv4."
+
+	do_ping_long "$node1" "dead:beef:$netid::2"
+	do_ping_long "$node2" "dead:beef:$netid::1"
+	stop_if_error "Longer ping test failed on IPv6."
+}
+
+run_ping_tests()
+{
+	echo "INFO: Running ping tests"
+	do_ping_tests 0
+}
+
+run_vlan_ping_tests()
+{
+	vlan_challenged_prp1=$(ip net exec "$node1" ethtool -k prp1 | \
+		grep "vlan-challenged" | awk '{print $2}')
+	vlan_challenged_prp2=$(ip net exec "$node2" ethtool -k prp2 | \
+		grep "vlan-challenged" | awk '{print $2}')
+
+	if [[ "$vlan_challenged_prp1" = "off" || \
+	      "$vlan_challenged_prp2" = "off" ]]; then
+		echo "INFO: Running VLAN ping tests"
+		setup_vlan_interfaces
+		do_ping_tests 2
+	else
+		echo "INFO: Not Running VLAN tests as the device does not support VLAN"
+	fi
+}
+
+check_prerequisites
+trap cleanup_all_ns EXIT
+
+setup_ns node1 node2
+setup_prp_interfaces
+
+run_ping_tests
+run_vlan_ping_tests
+
+exit $ret

linux-7.2.3/tools/testing/selftests/net/hsr/settings

@@ -0,0 +1 @@
+timeout=180