Resguardo inicial

linux-7.2.3/tools/testing/selftests/prctl/.gitignore

@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+disable-tsc-ctxt-sw-stress-test
+disable-tsc-on-off-stress-test
+disable-tsc-test
+set-anon-vma-name-test
+set-process-name

linux-7.2.3/tools/testing/selftests/prctl/Makefile

@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+ifndef CROSS_COMPILE
+ARCH ?= $(shell uname -m 2>/dev/null || echo not)
+override ARCH := $(shell echo $(ARCH) | sed -e s/i.86/x86/ -e s/x86_64/x86/)
+
+ifeq ($(ARCH),x86)
+TEST_PROGS := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test \
+		disable-tsc-test set-anon-vma-name-test set-process-name
+all: $(TEST_PROGS)
+
+include ../lib.mk
+
+endif
+endif

linux-7.2.3/tools/testing/selftests/prctl/config

@@ -0,0 +1 @@
+CONFIG_ANON_VMA_NAME=y

linux-7.2.3/tools/testing/selftests/prctl/disable-tsc-ctxt-sw-stress-test.c

@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
+ *
+ * Tests if the control register is updated correctly
+ * at context switches
+ *
+ * Warning: this test will cause a very high load for a few seconds
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <inttypes.h>
+#include <wait.h>
+
+
+#include <sys/prctl.h>
+#include <linux/prctl.h>
+
+/* Get/set the process' ability to use the timestamp counter instruction */
+#ifndef PR_GET_TSC
+#define PR_GET_TSC 25
+#define PR_SET_TSC 26
+# define PR_TSC_ENABLE		1   /* allow the use of the timestamp counter */
+# define PR_TSC_SIGSEGV		2   /* throw a SIGSEGV instead of reading the TSC */
+#endif
+
+static uint64_t rdtsc(void)
+{
+uint32_t lo, hi;
+/* We cannot use "=A", since this would use %rax on x86_64 */
+__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
+return (uint64_t)hi << 32 | lo;
+}
+
+static void sigsegv_expect(int sig)
+{
+	/* */
+}
+
+static void segvtask(void)
+{
+	if (prctl(PR_SET_TSC, PR_TSC_SIGSEGV) < 0)
+	{
+		perror("prctl");
+		exit(0);
+	}
+	signal(SIGSEGV, sigsegv_expect);
+	alarm(10);
+	rdtsc();
+	fprintf(stderr, "FATAL ERROR, rdtsc() succeeded while disabled\n");
+	exit(0);
+}
+
+
+static void sigsegv_fail(int sig)
+{
+	fprintf(stderr, "FATAL ERROR, rdtsc() failed while enabled\n");
+	exit(0);
+}
+
+static void rdtsctask(void)
+{
+	if (prctl(PR_SET_TSC, PR_TSC_ENABLE) < 0)
+	{
+		perror("prctl");
+		exit(0);
+	}
+	signal(SIGSEGV, sigsegv_fail);
+	alarm(10);
+	for(;;) rdtsc();
+}
+
+
+int main(void)
+{
+	int n_tasks = 100, i;
+
+	fprintf(stderr, "[No further output means we're all right]\n");
+
+	for (i=0; i<n_tasks; i++)
+		if (fork() == 0)
+		{
+			if (i & 1)
+				segvtask();
+			else
+				rdtsctask();
+		}
+
+	for (i=0; i<n_tasks; i++)
+		wait(NULL);
+
+	exit(0);
+}
+

linux-7.2.3/tools/testing/selftests/prctl/disable-tsc-on-off-stress-test.c

@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
+ *
+ * Tests if the control register is updated correctly
+ * when set with prctl()
+ *
+ * Warning: this test will cause a very high load for a few seconds
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <inttypes.h>
+#include <wait.h>
+
+
+#include <sys/prctl.h>
+#include <linux/prctl.h>
+
+/* Get/set the process' ability to use the timestamp counter instruction */
+#ifndef PR_GET_TSC
+#define PR_GET_TSC 25
+#define PR_SET_TSC 26
+# define PR_TSC_ENABLE		1   /* allow the use of the timestamp counter */
+# define PR_TSC_SIGSEGV		2   /* throw a SIGSEGV instead of reading the TSC */
+#endif
+
+/* snippet from wikipedia :-) */
+
+static uint64_t rdtsc(void)
+{
+uint32_t lo, hi;
+/* We cannot use "=A", since this would use %rax on x86_64 */
+__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
+return (uint64_t)hi << 32 | lo;
+}
+
+int should_segv = 0;
+
+static void sigsegv_cb(int sig)
+{
+	if (!should_segv)
+	{
+		fprintf(stderr, "FATAL ERROR, rdtsc() failed while enabled\n");
+		exit(0);
+	}
+	if (prctl(PR_SET_TSC, PR_TSC_ENABLE) < 0)
+	{
+		perror("prctl");
+		exit(0);
+	}
+	should_segv = 0;
+
+	rdtsc();
+}
+
+static void task(void)
+{
+	signal(SIGSEGV, sigsegv_cb);
+	alarm(10);
+	for(;;)
+	{
+		rdtsc();
+		if (should_segv)
+		{
+			fprintf(stderr, "FATAL ERROR, rdtsc() succeeded while disabled\n");
+			exit(0);
+		}
+		if (prctl(PR_SET_TSC, PR_TSC_SIGSEGV) < 0)
+		{
+			perror("prctl");
+			exit(0);
+		}
+		should_segv = 1;
+	}
+}
+
+
+int main(void)
+{
+	int n_tasks = 100, i;
+
+	fprintf(stderr, "[No further output means we're all right]\n");
+
+	for (i=0; i<n_tasks; i++)
+		if (fork() == 0)
+			task();
+
+	for (i=0; i<n_tasks; i++)
+		wait(NULL);
+
+	exit(0);
+}
+

linux-7.2.3/tools/testing/selftests/prctl/disable-tsc-test.c

@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tests for prctl(PR_GET_TSC, ...) / prctl(PR_SET_TSC, ...)
+ *
+ * Basic test to test behaviour of PR_GET_TSC and PR_SET_TSC
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <inttypes.h>
+
+
+#include <sys/prctl.h>
+#include <linux/prctl.h>
+
+/* Get/set the process' ability to use the timestamp counter instruction */
+#ifndef PR_GET_TSC
+#define PR_GET_TSC 25
+#define PR_SET_TSC 26
+# define PR_TSC_ENABLE		1   /* allow the use of the timestamp counter */
+# define PR_TSC_SIGSEGV		2   /* throw a SIGSEGV instead of reading the TSC */
+#endif
+
+const char *tsc_names[] =
+{
+	[0] = "[not set]",
+	[PR_TSC_ENABLE] = "PR_TSC_ENABLE",
+	[PR_TSC_SIGSEGV] = "PR_TSC_SIGSEGV",
+};
+
+static uint64_t rdtsc(void)
+{
+uint32_t lo, hi;
+/* We cannot use "=A", since this would use %rax on x86_64 */
+__asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
+return (uint64_t)hi << 32 | lo;
+}
+
+static void sigsegv_cb(int sig)
+{
+	int tsc_val = 0;
+
+	printf("[ SIG_SEGV ]\n");
+	printf("prctl(PR_GET_TSC, &tsc_val); ");
+	fflush(stdout);
+
+	if ( prctl(PR_GET_TSC, &tsc_val) == -1)
+		perror("prctl");
+
+	printf("tsc_val == %s\n", tsc_names[tsc_val]);
+	printf("prctl(PR_SET_TSC, PR_TSC_ENABLE)\n");
+	fflush(stdout);
+	if ( prctl(PR_SET_TSC, PR_TSC_ENABLE) == -1)
+		perror("prctl");
+
+	printf("rdtsc() == ");
+}
+
+int main(void)
+{
+	int tsc_val = 0;
+
+	signal(SIGSEGV, sigsegv_cb);
+
+	printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
+	printf("prctl(PR_GET_TSC, &tsc_val); ");
+	fflush(stdout);
+
+	if ( prctl(PR_GET_TSC, &tsc_val) == -1)
+		perror("prctl");
+
+	printf("tsc_val == %s\n", tsc_names[tsc_val]);
+	printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
+	printf("prctl(PR_SET_TSC, PR_TSC_ENABLE)\n");
+	fflush(stdout);
+
+	if ( prctl(PR_SET_TSC, PR_TSC_ENABLE) == -1)
+		perror("prctl");
+
+	printf("rdtsc() == %llu\n", (unsigned long long)rdtsc());
+	printf("prctl(PR_SET_TSC, PR_TSC_SIGSEGV)\n");
+	fflush(stdout);
+
+	if ( prctl(PR_SET_TSC, PR_TSC_SIGSEGV) == -1)
+		perror("prctl");
+
+	printf("rdtsc() == ");
+	fflush(stdout);
+	printf("%llu\n", (unsigned long long)rdtsc());
+	fflush(stdout);
+
+	exit(EXIT_SUCCESS);
+}
+

linux-7.2.3/tools/testing/selftests/prctl/set-anon-vma-name-test.c

@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This test covers the anonymous VMA naming functionality through prctl calls
+ */
+
+#include <errno.h>
+#include <sys/prctl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/mman.h>
+#include <string.h>
+
+#include "kselftest_harness.h"
+
+#define AREA_SIZE 1024
+
+#define GOOD_NAME "goodname"
+#define BAD_NAME "badname\1"
+
+#ifndef PR_SET_VMA
+#define PR_SET_VMA 0x53564d41
+#define PR_SET_VMA_ANON_NAME 0
+#endif
+
+
+int rename_vma(unsigned long addr, unsigned long size, char *name)
+{
+	int res;
+
+	res = prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME, addr, size, name);
+	if (res < 0)
+		return -errno;
+	return res;
+}
+
+int was_renaming_successful(char *target_name, unsigned long ptr)
+{
+	FILE *maps_file;
+
+	char line_buf[512], name[128], mode[8];
+	unsigned long start_addr, end_addr, offset;
+	unsigned int major_id, minor_id, node_id;
+
+	char target_buf[128];
+	int res = 0, sscanf_res;
+
+	// The entry name in maps will be in format [anon:<target_name>]
+	sprintf(target_buf, "[anon:%s]", target_name);
+	maps_file = fopen("/proc/self/maps", "r");
+	if (!maps_file) {
+		printf("## /proc/self/maps file opening error\n");
+		return 0;
+	}
+
+	// Parse the maps file to find the entry we renamed
+	while (fgets(line_buf, sizeof(line_buf), maps_file)) {
+		sscanf_res = sscanf(line_buf, "%lx-%lx %7s %lx %u:%u %u %s", &start_addr,
+					&end_addr, mode, &offset, &major_id,
+					&minor_id, &node_id, name);
+		if (sscanf_res == EOF) {
+			res = 0;
+			printf("## EOF while parsing the maps file\n");
+			break;
+		}
+		if (!strcmp(name, target_buf) && start_addr == ptr) {
+			res = 1;
+			break;
+		}
+	}
+	fclose(maps_file);
+	return res;
+}
+
+FIXTURE(vma) {
+	void *ptr_anon, *ptr_not_anon;
+};
+
+FIXTURE_SETUP(vma) {
+	self->ptr_anon = mmap(NULL, AREA_SIZE, PROT_READ | PROT_WRITE,
+					MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
+	ASSERT_NE(self->ptr_anon, NULL);
+	self->ptr_not_anon = mmap(NULL, AREA_SIZE, PROT_READ | PROT_WRITE,
+					MAP_PRIVATE, 0, 0);
+	ASSERT_NE(self->ptr_not_anon, NULL);
+}
+
+FIXTURE_TEARDOWN(vma) {
+	munmap(self->ptr_anon, AREA_SIZE);
+	munmap(self->ptr_not_anon, AREA_SIZE);
+}
+
+TEST_F(vma, renaming) {
+	TH_LOG("Try to rename the VMA with correct parameters");
+	EXPECT_GE(rename_vma((unsigned long)self->ptr_anon, AREA_SIZE, GOOD_NAME), 0);
+	EXPECT_TRUE(was_renaming_successful(GOOD_NAME, (unsigned long)self->ptr_anon));
+
+	TH_LOG("Try to pass invalid name (with non-printable character \\1) to rename the VMA");
+	EXPECT_EQ(rename_vma((unsigned long)self->ptr_anon, AREA_SIZE, BAD_NAME), -EINVAL);
+
+	TH_LOG("Try to rename non-anonymous VMA");
+	EXPECT_EQ(rename_vma((unsigned long) self->ptr_not_anon, AREA_SIZE, GOOD_NAME), -EINVAL);
+}
+
+TEST_HARNESS_MAIN

linux-7.2.3/tools/testing/selftests/prctl/set-process-name.c

@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This test covers the PR_SET_NAME functionality of prctl calls
+ */
+
+#include <errno.h>
+#include <sys/prctl.h>
+#include <string.h>
+
+#include "kselftest_harness.h"
+
+#define CHANGE_NAME "changename"
+#define EMPTY_NAME ""
+#define TASK_COMM_LEN 16
+#define MAX_PATH_LEN 50
+
+int set_name(char *name)
+{
+	int res;
+
+	res = prctl(PR_SET_NAME, name, NULL, NULL, NULL);
+
+	if (res < 0)
+		return -errno;
+	return res;
+}
+
+int check_is_name_correct(char *check_name)
+{
+	char name[TASK_COMM_LEN];
+	int res;
+
+	res = prctl(PR_GET_NAME, name, NULL, NULL, NULL);
+
+	if (res < 0)
+		return -errno;
+
+	return !strcmp(name, check_name);
+}
+
+int check_null_pointer(char *check_name)
+{
+	char *name = NULL;
+	int res;
+
+	res = prctl(PR_GET_NAME, name, NULL, NULL, NULL);
+
+	return res;
+}
+
+int check_name(void)
+{
+
+	int pid;
+
+	pid = getpid();
+	FILE *fptr = NULL;
+	char path[MAX_PATH_LEN] = {};
+	char name[TASK_COMM_LEN] = {};
+	char output[TASK_COMM_LEN] = {};
+	int j;
+
+	j = snprintf(path, MAX_PATH_LEN, "/proc/self/task/%d/comm", pid);
+	fptr = fopen(path, "r");
+	if (!fptr)
+		return -EIO;
+
+	fscanf(fptr, "%s", output);
+	if (ferror(fptr))
+		return -EIO;
+
+	int res = prctl(PR_GET_NAME, name, NULL, NULL, NULL);
+
+	if (res < 0)
+		return -errno;
+
+	return !strcmp(output, name);
+}
+
+TEST(rename_process) {
+
+	EXPECT_GE(set_name(CHANGE_NAME), 0);
+	EXPECT_TRUE(check_is_name_correct(CHANGE_NAME));
+
+	EXPECT_GE(set_name(EMPTY_NAME), 0);
+	EXPECT_TRUE(check_is_name_correct(EMPTY_NAME));
+
+	EXPECT_GE(set_name(CHANGE_NAME), 0);
+	EXPECT_LT(check_null_pointer(CHANGE_NAME), 0);
+
+	EXPECT_TRUE(check_name());
+}
+
+TEST_HARNESS_MAIN