Resguardo inicial

linux-7.2.3/tools/testing/selftests/rdma/Makefile

@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+TEST_PROGS := rxe_rping_between_netns.sh \
+		rxe_ipv6.sh \
+		rxe_socket_with_netns.sh \
+		rxe_test_NETDEV_UNREGISTER.sh \
+		rxe_sent_rcvd_bytes.sh
+
+include ../lib.mk

linux-7.2.3/tools/testing/selftests/rdma/config

@@ -0,0 +1,3 @@
+CONFIG_TUN
+CONFIG_VETH
+CONFIG_RDMA_RXE

linux-7.2.3/tools/testing/selftests/rdma/rxe_ipv6.sh

@@ -0,0 +1,65 @@
+#!/bin/bash
+
+# Configuration
+NS_NAME="net6"
+VETH_HOST="veth0"
+VETH_NS="veth1"
+RXE_NAME="rxe6"
+PORT=4791
+IP6_ADDR="2001:db8::1/64"
+
+source "$(dirname "$0")/../kselftest/ktap_helpers.sh"
+
+exec > /dev/null
+
+# Cleanup function to run on exit (even on failure)
+cleanup() {
+    ip netns del "$NS_NAME" 2>/dev/null
+    modprobe -r rdma_rxe 2>/dev/null
+    echo "Done."
+}
+trap cleanup EXIT
+
+# 1. Prerequisites check
+for mod in tun veth rdma_rxe; do
+    if ! modinfo "$mod" >/dev/null 2>&1; then
+        echo "SKIP: Kernel module '$mod' not found." >&2
+        exit $KSFT_SKIP
+    fi
+done
+
+modprobe rdma_rxe
+
+# 2. Setup Namespace and Networking
+echo "Setting up IPv6 network namespace..."
+ip netns add "$NS_NAME"
+ip link add "$VETH_HOST" type veth peer name "$VETH_NS"
+ip link set "$VETH_NS" netns "$NS_NAME"
+ip netns exec "$NS_NAME" ip addr add "$IP6_ADDR" dev "$VETH_NS"
+ip netns exec "$NS_NAME" ip link set "$VETH_NS" up
+ip link set "$VETH_HOST" up
+
+# 3. Add RDMA Link
+echo "Adding RDMA RXE link..."
+if ! ip netns exec "$NS_NAME" rdma link add "$RXE_NAME" type rxe netdev "$VETH_NS"; then
+    echo "Error: Failed to create RXE link."
+    exit 1
+fi
+
+# 4. Verification: Port should be listening
+# Using -H to skip headers and -q for quiet exit codes
+if ! ip netns exec "$NS_NAME" ss -Hul6n sport = :$PORT | grep -q ":$PORT"; then
+    echo "Error: UDP port $PORT is NOT listening after link creation."
+    exit 1
+fi
+echo "Verified: Port $PORT is active."
+
+# 5. Removal and Verification
+echo "Deleting RDMA link..."
+ip netns exec "$NS_NAME" rdma link del "$RXE_NAME"
+
+if ip netns exec "$NS_NAME" ss -Hul6n sport = :$PORT | grep -q ":$PORT"; then
+    echo "Error: UDP port $PORT still active after link deletion."
+    exit 1
+fi
+echo "Verified: Port $PORT closed successfully."

linux-7.2.3/tools/testing/selftests/rdma/rxe_rping_between_netns.sh

@@ -0,0 +1,92 @@
+#!/bin/bash
+
+# Configuration
+NS="test1"
+VETH_A="veth-a"
+VETH_B="veth-b"
+IP_A="1.1.1.1"
+IP_B="1.1.1.2"
+PORT=4791
+
+source "$(dirname "$0")/../kselftest/ktap_helpers.sh"
+
+exec > /dev/null
+
+# --- Cleanup Routine ---
+cleanup() {
+    echo "Cleaning up resources..."
+    rdma link del rxe1 2>/dev/null
+    ip netns exec "$NS" rdma link del rxe0 2>/dev/null
+    ip link delete "$VETH_B" 2>/dev/null
+    ip netns del "$NS" 2>/dev/null
+    modprobe -r rdma_rxe 2>/dev/null
+}
+trap cleanup EXIT
+
+# --- Prerequisite Checks ---
+if [[ $EUID -ne 0 ]]; then
+   echo "This script must be run as root"
+   exit 1
+fi
+
+if ! modinfo rdma_rxe >/dev/null 2>&1; then
+    echo "SKIP: Kernel module 'rdma_rxe' not found." >&2
+    exit $KSFT_SKIP
+fi
+
+modprobe rdma_rxe || { echo "Failed to load rdma_rxe"; exit 1; }
+
+# --- Setup Network Topology ---
+echo "Setting up network namespace and veth pair..."
+ip netns add "$NS"
+ip link add "$VETH_A" type veth peer name "$VETH_B"
+ip link set "$VETH_A" netns "$NS"
+
+# Configure Namespace side (test1)
+ip netns exec "$NS" ip addr add "$IP_A/24" dev "$VETH_A"
+ip netns exec "$NS" ip link set "$VETH_A" up
+ip netns exec "$NS" ip link set lo up
+
+# Configure Host side
+ip addr add "$IP_B/24" dev "$VETH_B"
+ip link set "$VETH_B" up
+
+# --- RXE Link Creation ---
+echo "Creating RDMA links..."
+ip netns exec "$NS" rdma link add rxe0 type rxe netdev "$VETH_A"
+rdma link add rxe1 type rxe netdev "$VETH_B"
+
+# Verify UDP 4791 is listening
+check_port() {
+    local target=$1 # "host" or "ns"
+    if [ "$target" == "ns" ]; then
+        ip netns exec "$NS" ss -Huln sport == :$PORT | grep -q ":$PORT"
+    else
+        ss -Huln sport == :$PORT | grep -q ":$PORT"
+    fi
+}
+
+check_port "ns" || { echo "Error: RXE port not listening in namespace"; exit 1; }
+check_port "host" || { echo "Error: RXE port not listening on host"; exit 1; }
+
+# --- Connectivity Test ---
+echo "Testing connectivity with rping..."
+ping -c 2 -W 1 "$IP_A" > /dev/null || { echo "Ping failed"; exit 1; }
+
+# Start rping server in background
+ip netns exec "$NS" rping -s -a "$IP_A" -v > /dev/null 2>&1 &
+RPING_PID=$!
+sleep 1 # Allow server to bind
+
+# Run rping client
+rping -c -a "$IP_A" -d -v -C 3
+RESULT=$?
+
+kill $RPING_PID 2>/dev/null
+
+if [ $RESULT -eq 0 ]; then
+    echo "SUCCESS: RDMA traffic verified."
+else
+    echo "FAILURE: rping failed."
+    exit 1
+fi

linux-7.2.3/tools/testing/selftests/rdma/rxe_sent_rcvd_bytes.sh

@@ -0,0 +1,75 @@
+#!/bin/bash
+
+# Configuration
+PORT=4791
+MODS=("tun" "rdma_rxe")
+
+exec > /dev/null
+
+# --- Helper: Cleanup Routine ---
+cleanup() {
+    echo "Cleaning up resources..."
+    rdma link del rxe0 2>/dev/null
+    ip link del tun0 2>/dev/null
+    for m in "${MODS[@]}"; do modprobe -r "$m" 2>/dev/null; done
+}
+
+# Ensure cleanup runs on script exit or interrupt
+trap cleanup EXIT
+
+# --- Phase 1: Environment Check ---
+if [[ $EUID -ne 0 ]]; then
+   echo "Error: This script must be run as root."
+   exit 1
+fi
+
+for m in "${MODS[@]}"; do
+    modprobe "$m" || { echo "Error: Failed to load $m"; exit 1; }
+done
+
+# --- Phase 2: Create Interfaces & RXE Links ---
+echo "Creating tun0 (1.1.1.1) and rxe0..."
+ip tuntap add mode tun tun0
+ip addr add 1.1.1.1/24 dev tun0
+ip link set tun0 up
+rdma link add rxe0 type rxe netdev tun0
+
+# Verify port 4791 is listening
+if ! ss -Huln sport = :$PORT | grep -q ":$PORT"; then
+    echo "Error: UDP port $PORT not found after rxe0 creation"
+    exit 1
+fi
+
+orig_s=`cat /sys/class/infiniband/rxe0/ports/1/counters/port_xmit_data`
+orig_r=`cat /sys/class/infiniband/rxe0/ports/1/counters/port_rcv_data`
+
+rping -s -a 1.1.1.1 -C 3 -v &
+sleep 1
+rping -c -a 1.1.1.1 -C 3 -d -v
+
+new_s=`cat /sys/class/infiniband/rxe0/ports/1/counters/port_xmit_data`
+new_r=`cat /sys/class/infiniband/rxe0/ports/1/counters/port_rcv_data`
+
+echo sent $new_s $orig_s
+echo rcvd $new_r $orig_r
+
+result0=$((new_s - orig_s))
+result1=$((new_r - orig_r))
+
+if [ $result0 != $result1 ]; then
+       echo "Error: sent and rcvd bytes different"
+       echo $result0
+       echo $result1
+       exit 1
+fi
+
+echo "Deleting rxe0..."
+rdma link del rxe0
+
+# Port should now be gone
+if ss -Huln sport = :$PORT | grep -q ":$PORT"; then
+    echo "Error: UDP port $PORT still exists after all links deleted"
+    exit 1
+fi
+
+echo "Test passed successfully."

linux-7.2.3/tools/testing/selftests/rdma/rxe_socket_with_netns.sh

@@ -0,0 +1,82 @@
+#!/bin/bash
+
+# Configuration
+PORT=4791
+MODS=("tun" "rdma_rxe")
+
+source "$(dirname "$0")/../kselftest/ktap_helpers.sh"
+
+exec > /dev/null
+
+# --- Helper: Cleanup Routine ---
+cleanup() {
+    echo "Cleaning up resources..."
+    rdma link del rxe1 2>/dev/null
+    rdma link del rxe0 2>/dev/null
+    ip link del tun0 2>/dev/null
+    ip link del tun1 2>/dev/null
+    for m in "${MODS[@]}"; do modprobe -r "$m" 2>/dev/null; done
+}
+
+# Ensure cleanup runs on script exit or interrupt
+trap cleanup EXIT
+
+# --- Phase 1: Environment Check ---
+if [[ $EUID -ne 0 ]]; then
+   echo "Error: This script must be run as root."
+   exit 1
+fi
+
+for m in "${MODS[@]}"; do
+    if ! modinfo "$m" >/dev/null 2>&1; then
+        echo "SKIP: Kernel module '$m' not found." >&2
+        exit $KSFT_SKIP
+    fi
+    modprobe "$m" || { echo "Error: Failed to load $m"; exit 1; }
+done
+
+# --- Phase 2: Create Interfaces & RXE Links ---
+echo "Creating tun0 (1.1.1.1) and rxe0..."
+ip tuntap add mode tun tun0
+ip addr add 1.1.1.1/24 dev tun0
+ip link set tun0 up
+rdma link add rxe0 type rxe netdev tun0
+
+# Verify port 4791 is listening
+if ! ss -Huln sport = :$PORT | grep -q ":$PORT"; then
+    echo "Error: UDP port $PORT not found after rxe0 creation"
+    exit 1
+fi
+
+echo "Creating tun1 (2.2.2.2) and rxe1..."
+ip tuntap add mode tun tun1
+ip addr add 2.2.2.2/24 dev tun1
+ip link set tun1 up
+rdma link add rxe1 type rxe netdev tun1
+
+# Verify port 4791 is still listening
+if ! ss -Huln sport = :$PORT | grep -q ":$PORT"; then
+    echo "Error: UDP port $PORT missing after rxe1 creation"
+    exit 1
+fi
+
+# --- Phase 3: Targeted Deletion ---
+echo "Deleting rxe1..."
+rdma link del rxe1
+
+# Port should still be active because rxe0 is still alive
+if ! ss -Huln sport = :$PORT | grep -q ":$PORT"; then
+    echo "Error: UDP port $PORT closed prematurely"
+    exit 1
+fi
+
+echo "Deleting rxe0..."
+rdma link del rxe0
+
+# Port should now be gone
+if ss -Huln sport = :$PORT | grep -q ":$PORT"; then
+    echo "Error: UDP port $PORT still exists after all links deleted"
+    exit 1
+fi
+
+echo "Test passed successfully."

linux-7.2.3/tools/testing/selftests/rdma/rxe_test_NETDEV_UNREGISTER.sh

@@ -0,0 +1,65 @@
+#!/bin/bash
+
+# Configuration
+DEV_NAME="tun0"
+RXE_NAME="rxe0"
+RDMA_PORT=4791
+
+source "$(dirname "$0")/../kselftest/ktap_helpers.sh"
+
+exec > /dev/null
+
+# --- Cleanup Routine ---
+# Ensures environment is clean even if the script hits an error
+cleanup() {
+    echo "Performing cleanup..."
+    rdma link del $RXE_NAME 2>/dev/null
+    ip link del $DEV_NAME 2>/dev/null
+    modprobe -r rdma_rxe 2>/dev/null
+}
+trap cleanup EXIT
+
+# 1. Dependency Check
+if ! modinfo rdma_rxe >/dev/null 2>&1; then
+    echo "SKIP: rdma_rxe module not found." >&2
+    exit $KSFT_SKIP
+fi
+
+modprobe rdma_rxe
+
+# 2. Setup TUN Device
+echo "Creating $DEV_NAME..."
+ip tuntap add mode tun "$DEV_NAME"
+ip addr add 1.1.1.1/24 dev "$DEV_NAME"
+ip link set "$DEV_NAME" up
+
+# 3. Attach RXE Link
+echo "Attaching RXE link $RXE_NAME to $DEV_NAME..."
+rdma link add "$RXE_NAME" type rxe netdev "$DEV_NAME"
+
+# 4. Verification: Port Check
+# Use -H (no header) and -q (quiet) for cleaner scripting logic
+if ! ss -Huln sport == :$RDMA_PORT | grep -q ":$RDMA_PORT"; then
+    echo "Error: UDP port $RDMA_PORT is not listening."
+    exit 1
+fi
+echo "Verified: RXE is listening on UDP $RDMA_PORT."
+
+# 5. Trigger NETDEV_UNREGISTER
+# We delete the underlying device without deleting the RDMA link first.
+echo "Triggering NETDEV_UNREGISTER by deleting $DEV_NAME..."
+ip link del "$DEV_NAME"
+
+# 6. Final Verification
+# The RXE link and the UDP port should be automatically cleaned up by the kernel.
+if rdma link show "$RXE_NAME" 2>/dev/null; then
+    echo "Error: $RXE_NAME still exists after netdev removal."
+    exit 1
+fi
+
+if ss -Huln sport == :$RDMA_PORT | grep -q ":$RDMA_PORT"; then
+    echo "Error: UDP port $RDMA_PORT still listening after netdev removal."
+    exit 1
+fi
+
+echo "Success: NETDEV_UNREGISTER handled correctly."