// SPDX-License-Identifier: BSD-3-Clause

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/sound/qcom,q6asm.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>

#include "sc7180.dtsi"

#include "pm6150.dtsi"
#include "pm6150l.dtsi"

/delete-node/ &tz_mem;
/delete-node/ &ipa_fw_mem;

/ {
	model = "ECS LIVA QC710";
	compatible = "ecs,liva-qc710", "qcom,sc7180";
	chassis-type = "desktop";

	aliases {
		bluetooth0 = &bluetooth;
		hsuart0 = &uart3;
		wifi0 = &wifi;
	};

	hdmi-bridge {
		compatible = "algoltek,ag6311";

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				hdmi_bridge_dp_in: endpoint {
					remote-endpoint = <&usb_1_qmpphy_dp_out>;
				};
			};

			port@1 {
				reg = <1>;

				hdmi_bridge_tmds_out: endpoint {
					remote-endpoint = <&hdmi_con>;
				};
			};
		};
	};

	hdmi-connector {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con: endpoint {
				remote-endpoint = <&hdmi_bridge_tmds_out>;
			};
		};
	};

	reserved-memory {
		gpu_mem: zap-shader@80840000 {
			reg = <0x0 0x80840000 0 0x2000>;
			no-map;
		};

		venus_mem: venus@85b00000 {
			reg = <0x0 0x85b00000 0 0x500000>;
			no-map;
		};

		mpss_mem: mpss@86000000 {
			reg = <0x0 0x86000000 0x0 0x2000000>;
			no-map;
		};

		adsp_mem: adsp@8e400000 {
			reg = <0x0 0x8e400000 0x0 0x2800000>;
			no-map;
		};

		wlan_mem: wlan@93900000 {
			reg = <0x0 0x93900000 0x0 0x200000>;
			no-map;
		};
	};

	usb_a_connector: usb-a-connector {
		compatible = "usb-a-connector";

		port {
			usb_a_connector_ss_in: endpoint {
				remote-endpoint = <&usb_1_qmpphy_usb_ss_out>;
			};
		};
	};
};

&apps_rsc {
	regulators-0 {
		compatible = "qcom,pm6150-rpmh-regulators";
		qcom,pmic-id = "a";

		vreg_s1a_1p1: smps1 {
			regulator-min-microvolt = <1128000>;
			regulator-max-microvolt = <1128000>;
		};

		vreg_l4a_0p8: ldo4 {
			regulator-min-microvolt = <824000>;
			regulator-max-microvolt = <928000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9a_0p6: ldo9 {
			regulator-min-microvolt = <488000>;
			regulator-max-microvolt = <800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l10a_1p8: ldo10 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-always-on;
			regulator-boot-on;
		};

		vreg_l11a_1p8: ldo11 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l12a_1p8: ldo12 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l13a_1p8: ldo13 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l14a_1p8: ldo14 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l15a_1p8: ldo15 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l16a_2p7: ldo16 {
			regulator-min-microvolt = <2496000>;
			regulator-max-microvolt = <3304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l17a_3p0: ldo17 {
			regulator-min-microvolt = <2920000>;
			regulator-max-microvolt = <3232000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l18a_2p8: ldo18 {
			regulator-min-microvolt = <2496000>;
			regulator-max-microvolt = <3304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l19a_2p9: ldo19 {
			regulator-min-microvolt = <2960000>;
			regulator-max-microvolt = <2960000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-1 {
		compatible = "qcom,pm6150l-rpmh-regulators";
		qcom,pmic-id = "c";

		vreg_s8c_1p3: smps8 {
			regulator-min-microvolt = <1120000>;
			regulator-max-microvolt = <1408000>;
		};

		vreg_l1c_1p8: ldo1 {
			regulator-min-microvolt = <1616000>;
			regulator-max-microvolt = <1984000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2c_1p3: ldo2 {
			regulator-min-microvolt = <1168000>;
			regulator-max-microvolt = <1304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3c_1p2: ldo3 {
			regulator-min-microvolt = <1144000>;
			regulator-max-microvolt = <1304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l4c_1p8: ldo4 {
			regulator-min-microvolt = <1648000>;
			regulator-max-microvolt = <3304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
		};

		vreg_l5c_1p8: ldo5 {
			regulator-min-microvolt = <1648000>;
			regulator-max-microvolt = <3304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
		};

		vreg_l6c_2p9: ldo6 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2950000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7c_3p0: ldo7 {
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3312000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
		};

		vreg_l8c_1p8: ldo8 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9c_2p9: ldo9 {
			regulator-min-microvolt = <2952000>;
			regulator-max-microvolt = <2952000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l10c_3p3: ldo10 {
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3400000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l11c_3p3: ldo11 {
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3400000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_bob: bob {
			regulator-min-microvolt = <3008000>;
			regulator-max-microvolt = <3960000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
		};
	};
};

&gpu {
	status = "okay";
};

&gpu_zap_shader {
	firmware-name = "qcom/sc7180/ecs/liva-qc710/qcdxkmsuc7180.mbn";
};

&mdss {
	status = "okay";
};

&mdss_dp {
	pinctrl-0 = <&dp_hot_plug_det>;
	pinctrl-names = "default";

	status = "okay";
};

&mdss_dp_out {
	data-lanes = <0 1>;
	remote-endpoint = <&usb_1_qmpphy_dp_in>;
};

&pm6150_rtc {
	qcom,uefi-rtc-info;

	status = "okay";
};

&qfprom {
	vcc-supply = <&vreg_l11a_1p8>;
};

&qupv3_id_0 {
	status = "okay";
};

&qupv3_id_1 {
	status = "okay";
};

&remoteproc_adsp {
	memory-region = <&adsp_mem>;
	firmware-name = "qcom/sc7180/ecs/liva-qc710/qcadsp7180.mbn";

	status = "okay";
};

&remoteproc_mpss {
	firmware-name = "qcom/sc7180/ecs/liva-qc710/qcmpss7180_nm.mbn";

	status = "okay";
};

&sdhc_1 {
	pinctrl-0 = <&sdc1_default>;
	pinctrl-1 = <&sdc1_sleep>;
	pinctrl-names = "default", "sleep";
	vmmc-supply = <&vreg_l19a_2p9>;
	vqmmc-supply = <&vreg_l12a_1p8>;

	status = "okay";
};

&sdhc_2 {
	pinctrl-0 = <&sdc2_default>;
	pinctrl-1 = <&sdc2_sleep>;
	pinctrl-names = "default", "sleep";
	vmmc-supply = <&vreg_l9c_2p9>;
	vqmmc-supply = <&vreg_l6c_2p9>;

	cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;

	status = "okay";
};

&tlmm {
	/*
	 * The TZ seem to protect those because some boards can have
	 * fingerprint sensor connected to this range. Not connected
	 * on this board
	 */
	gpio-reserved-ranges = <58 5>;

	qup_uart3_sleep: qup-uart3-sleep-state {
		cts-pins {
			/*
			 * Configure a pull-down on CTS to match the pull of
			 * the Bluetooth module.
			 */
			pins = "gpio38";
			function = "gpio";
			bias-pull-down;
		};

		rts-pins {
			/*
			 * Configure pull-down on RTS. As RTS is active low
			 * signal, pull it low to indicate the BT SoC that it
			 * can wakeup the system anytime from suspend state by
			 * pulling RX low (by sending wakeup bytes).
			 */
			pins = "gpio39";
			function = "gpio";
			bias-pull-down;
		};

		tx-pins {
			/*
			 * Configure pull-up on TX when it isn't actively driven
			 * to prevent BT SoC from receiving garbage during sleep.
			 */
			pins = "gpio40";
			function = "gpio";
			bias-pull-up;
		};

		rx-pins {
			/*
			 * Configure a pull-up on RX. This is needed to avoid
			 * garbage data when the TX pin of the Bluetooth module
			 * is floating which may cause spurious wakeups.
			 */
			pins = "gpio41";
			function = "gpio";
			bias-pull-up;
		};
	};

	sdc1_default: sdc1-default-state {
		clk-pins {
			pins = "sdc1_clk";
			drive-strength = <16>;
			bias-disable;
		};

		cmd-pins {
			pins = "sdc1_cmd";
			drive-strength = <16>;
			bias-pull-up;
		};

		data-pins {
			pins = "sdc1_data";
			drive-strength = <16>;
			bias-pull-up;
		};

		rclk-pins {
			pins = "sdc1_rclk";
			bias-pull-down;
		};
	};

	sdc1_sleep: sdc1-sleep-state {
		clk-pins {
			pins = "sdc1_clk";
			drive-strength = <2>;
			bias-disable;
		};

		cmd-pins {
			pins = "sdc1_cmd";
			drive-strength = <2>;
			bias-pull-up;
		};

		data-pins {
			pins = "sdc1_data";
			drive-strength = <2>;
			bias-pull-up;
		};

		rclk-pins {
			pins = "sdc1_rclk";
			bias-pull-down;
		};
	};

	sdc2_default: sdc2-default-state {
		clk-pins {
			pins = "sdc2_clk";
			bias-disable;
			drive-strength = <16>;
		};

		cmd-pins {
			pins = "sdc2_cmd";
			bias-pull-up;
			drive-strength = <10>;
		};

		data-pins {
			pins = "sdc2_data";
			bias-pull-up;
			drive-strength = <10>;
		};

		sd-cd-pins {
			pins = "gpio69";
			function = "gpio";
			bias-pull-up;
			drive-strength = <2>;
		};
	};

	sdc2_sleep: sdc2-sleep-state {
		clk-pins {
			pins = "sdc2_clk";
			bias-disable;
			drive-strength = <2>;
		};

		cmd-pins {
			pins = "sdc2_cmd";
			bias-pull-up;
			drive-strength = <2>;
		};

		data-pins {
			pins = "sdc2_data";
			bias-pull-up;
			drive-strength = <2>;
		};

		sd-cd-pins {
			pins = "gpio69";
			function = "gpio";
			bias-pull-up;
			drive-strength = <2>;
		};
	};
};
&uart3 {
	/delete-property/ interrupts;
	interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
			      <&tlmm 41 IRQ_TYPE_EDGE_FALLING>;

	pinctrl-1 = <&qup_uart3_sleep>;
	pinctrl-names = "default", "sleep";

	status = "okay";

	bluetooth: bluetooth {
		compatible = "qcom,wcn3991-bt";
		vddio-supply = <&vreg_l10a_1p8>;
		vddxo-supply = <&vreg_l1c_1p8>;
		vddrf-supply = <&vreg_l2c_1p3>;
		vddch0-supply = <&vreg_l10c_3p3>;
		max-speed = <3200000>;
	};
};

&usb_1 {
	status = "okay";
};

&usb_1_dwc3 {
	dr_mode = "host";
	#address-cells = <1>;
	#size-cells = <0>;

	hub@1 {
		compatible = "usb5e3,608";
		reg = <1>;
		#address-cells = <1>;
		#size-cells = <0>;

		/* @1: 3.0 Type-A port on the back
		 * @2: 2.0 Type-A port the side
		 * @3: 2.0 Type-C port on the back
		 */

		ethernet@4 {
			compatible = "usbbda,8152";
			reg = <4>;
		};
	};
};

&usb_1_hsphy {
	vdd-supply = <&vreg_l4a_0p8>;
	vdda-pll-supply = <&vreg_l11a_1p8>;
	vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
	qcom,imp-res-offset-value = <8>;
	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
	qcom,bias-ctrl-value = <0x22>;
	qcom,charge-ctrl-value = <3>;
	qcom,hsdisc-trim-value = <0>;

	status = "okay";
};

&usb_1_qmpphy {
	vdda-phy-supply = <&vreg_l3c_1p2>;
	vdda-pll-supply = <&vreg_l4a_0p8>;

	/delete-property/ mode-switch;
	/delete-property/ orientation-switch;

	status = "okay";

	ports {
		port@0 {
			#address-cells = <1>;
			#size-cells = <0>;

			/delete-node/ endpoint;

			usb_1_qmpphy_dp_out: endpoint@0 {
				reg = <0>;

				data-lanes = <3 2>;
				remote-endpoint = <&hdmi_bridge_dp_in>;
			};

			usb_1_qmpphy_usb_ss_out: endpoint@1 {
				reg = <1>;

				data-lanes = <1 0>;
				remote-endpoint = <&usb_a_connector_ss_in>;
			};
		};
	};
};

&usb_1_qmpphy_dp_in {
	remote-endpoint = <&mdss_dp_out>;
};

&venus {
	firmware-name = "qcom/sc7180/ecs/liva-qc710/qcvss7180.mbn";
};

&wifi {
	vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
	vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
	vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
	vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;

	qcom,calibration-variant = "ECS_QC710";

	status = "okay";
};